/****************************************************************************** * * * * Copyright (C) 1997-2003 by Dimitri van Heesch. * * Permission to use, copy, modify, and distribute this software and its * documentation under the terms of the GNU General Public License is hereby * granted. No representations are made about the suitability of this software * for any purpose. It is provided "as is" without express or implied warranty. * See the GNU General Public License for more details. * * Documents produced by Doxygen are derivative works derived from the * input used in their production; they are not affected by this license. * */ /*! \page starting Getting started The executable \c doxygen is the main program that parses the sources and generates the documentation. See section \ref doxygen_usage for more detailed usage information. The executable \c doxytag is only needed if you want to generate references to external documentation (i.e. documentation that was generated by doxygen) for which you do not have the sources or to create a search index for the search engine. See section \ref doxytag_usage for more detailed usage information. The executable \c doxysearch is only needed if you want to use the search engine. See section \ref doxysearch_usage for more detailed usage information. Optionally, the executable \c doxywizard is a graphical front-end for editing the configuration files that are used by doxygen. The following figure shows the relation between the tools and the flow of information between them: \image html infoflow.gif "Doxygen information flow" \image latex infoflow.eps "Doxygen information flow" width=14cm \section step1 Step 1: Creating a configuration file Doxygen uses a configuration file to determine all of its settings. Each project should get its own configuration file. A project can consist of a single source file, but can also be an entire source tree that is recursively scanned. To simplify the creation of a configuration file, doxygen can create a template configuration file for you. To do this call \c doxygen with the \c -g option: \verbatim doxygen -g \endverbatim where \ is the name of the configuration file. If you omit the file name, a file named \c Doxyfile will be created. If a file with the name \ already exists, doxygen will rename it to \.bak before generating the configuration template. If you use - (i.e. the minus sign) as the file name then doxygen will try to read the configuration file from standard input (stdin). The configuration file has a format that is similar to that of a (simple) Makefile. It contains of a number of assignments (tags) of the form: TAGNAME = VALUE or
TAGNAME = VALUE1 VALUE2 ...
You can probably leave the values of most tags in a generated template configuration file to their default value. See section \ref config for more details about the configuration file. If you do not like to edit the config file with a text editor, you should have a look at \ref doxywizard_usage "doxywizard", which is a GUI front-end that can create, read and write doxygen configuration files, and allows setting configuration options by entering them via dialogs. For a small project consisting of a few C and/or C++ source and header files, you can leave \ref cfg_input "INPUT" tag empty and doxygen will search for sources in the current directory. If you have a larger project consisting of a source directory or tree you should put the root directory or directories after the \ref cfg_input "INPUT" tag, and add one or more file patterns to the \ref cfg_file_patterns "FILE_PATTERNS" tag (for instance *.cpp *.h). Only files that match one of the patterns will be parsed (if the patterns are omitted a list of source extensions is used). For recursive parsing of a source tree you must set the \ref cfg_recursive "RECURSIVE" tag to \c YES. To further fine-tune the list of files that is parsed the \ref cfg_exclude "EXCLUDE" and \ref cfg_exclude_patterns "EXCLUDE_PATTERNS" tags can be used. To omit all \c test directories from a source tree for instance, one could use: \verbatim EXCLUDE_PATTERNS = */test/* \endverbatim Doxygen normally parses files if they are C or C++ sources. If a file has a .idl or .odl extension it is treated as an IDL file. If it has a .java extension it is treated as a file written in Java. Files ending with .cs are treated as C# files. Finally, files with the extensions .php, .php4, .inc or .phtml are treated as PHP sources. \anchor extract_all If you start using doxygen for an existing project (thus without any documentation that doxygen is aware of), you can still get an idea of what the documented result would be. To do so, you must set the \ref cfg_extract_all "EXTRACT_ALL" tag in the configuration file to \c YES. Then, doxygen will pretend everything in your sources is documented. Please note that as a consequence warnings about undocumented members will not be generated as long as \ref cfg_extract_all "EXTRACT_ALL" is set to \c YES. To analyse an existing piece of software it is useful to cross-reference a (documented) entity with its definition in the source files. Doxygen will generate such cross-references if you set the \ref cfg_source_browser "SOURCE_BROWSER" tag to \c YES. It can also include the sources directly into the documentation by setting \ref cfg_inline_sources "INLINE_SOURCES" to \c YES (this can be handy for code reviews for instance). \section step2 Step 2: Running doxygen To generate the documentation you can now enter: \verbatim doxygen \endverbatim Doxygen will create a \c html, \c rtf, \c latex and/or \c man directory inside the output directory. As the names suggest these directories contain the generated documentation in HTML, RTF, \f$\mbox{\LaTeX}\f$ and Unix-Man page format. The default output directory is the directory in which \c doxygen is started. The directory to which the output is written can be changed using the \ref cfg_output_directory "OUTPUT_DIRECTORY", \ref cfg_html_output "HTML_OUTPUT", \ref cfg_rtf_output "RTF_OUTPUT", \ref cfg_latex_output "LATEX_OUTPUT", and \ref cfg_man_output "MAN_OUTPUT" tags of the configuration file. If the output directory does not exist, \c doxygen will try to create it for you. \addindex browser The generated HTML documentation can be viewed by pointing a HTML browser to the \c index.html file in the \c html directory. For the best results a browser that supports cascading style sheets (CSS) should be used (I'm currently using Netscape 4.61 to test the generated output). \addindex LaTeX The generated \f$\mbox{\LaTeX}\f$ documentation must first be compiled by a \f$\mbox{\LaTeX}\f$ compiler (I use teTeX distribution version 0.9 that contains \f$\mbox{\TeX}\f$ version 3.14159). To simplify the process of compiling the generated documentation, \c doxygen writes a \c Makefile into the \c latex directory. By typing \c make in the \c latex directory the dvi file \c refman.dvi will be generated (provided that you have a make tool called make of course). This file can then be viewed using \c xdvi or converted into a PostScript file \c refman.ps by typing make ps (this requires dvips). To put 2 pages on one physical page use make ps_2on1 instead. The resulting PostScript file can be send to a PostScript printer. If you do not have a PostScript printer, you can try to use ghostscript to convert PostScript into something your printer understands. Conversion to PDF is also possible if you have installed the ghostscript interpreter; just type make pdf (or make pdf_2on1). To get the best results for PDF output you should set the \ref cfg_pdf_hyperlinks "PDF_HYPERLINKS" tag to \c YES. The generated man pages can be viewed using the \c man program. You do need to make sure the man directory is in the man path (see the \c MANPATH environment variable). Note that there are some limitations to the capabilities of the man page format, so some information (like class diagrams, cross references and formulas) will be lost. \section step3 Step 3: Documenting the sources Although documenting the source is presented as step 3, in a new project this should of course be step 1. Here I assume you already have some code and you want doxygen to generate a nice document describing the API and maybe the internals as well. If the \ref cfg_extract_all "EXTRACT_ALL" option is set to \c NO in the configuration file (the default), then doxygen will only generate documentation for \e documented members, files, classes and namespaces. So how do you document these? For members, classes and namespaces there are basically two options:
  1. Place a \e special documentation block in front of the declaration or definition of the member, class or namespace. For file, class and namespace members it is also allowed to place the documention directly after the member. See section \ref specialblock to learn more about special documentation blocks.
  2. Place a special documentation block somewhere else (another file or another location) \e and put a structural command in the documentation block. A structural command links a documentation block to a certain entity that can be documented (e.g. a member, class, namespace or file). See section \ref structuralcommands to learn more about structural commands.
Files can only be documented using the second option, since there is no way to put a documentation block before a file. Of course, file members (functions, variable, typedefs, defines) do not need an explicit structural command; just putting a special documentation block in front or behind them will do. The text inside a special documentation block is parsed before it is written to the HTML and/or \f$\mbox{\LaTeX}\f$ output files. \addindex parsing During parsing the following steps take place:
  • The special commands inside the documentation are executed. See section \ref commands for an overview of all commands.
  • If a line starts with some whitespace followed by one or more asterisks (*) and then optionally more whitespace, then all whitespace and asterisks are removed.
  • All resulting blank lines are treated as a paragraph separators. This saves you from placing new-paragraph commands yourself in order to make the generated documentation readable.
  • Links are created for words corresponding to documented classes.
  • Links to members are created when certain patterns are found in the text. See section \ref autolink for more information on how the automatic link generation works.
  • HTML tags that are in the documentation are interpreted and converted to \f$\mbox{\LaTeX}\f$ equivalents for the \f$\mbox{\LaTeX}\f$ output. See section \ref htmlcmds for an overview of all supported HTML tags.
\htmlonly Go to the next section or return to the index. \endhtmlonly */