#! /usr/bin/perl -w
# -*- mode: perl; mode: fold -*-

# This is a Perl script for Doxygen developers.  
# Its main purpose is to extract the information from sources
# related to internationalization (the translator classes).
# It uses the information to generate documentation (language.doc,
# translator_report.txt) from templates (language.tpl, maintainers.txt).
#
#                              Petr Prikryl (prikrylp@skil.cz)
# History:
# --------
# 2001/04/27
#  - First version of the script.
#
# 2001/05/02
#  - Update to accept updateNeededMessage() in the Translator class.
#  - First version that generates doc/language.doc.
#
# 2001/05/07
#  - Environment variable $doxygenrootdir now points to the
#    Doxygen's root directory.
#
# 2001/05/11
#  - Updated to reflect using TranslatorAdapterCVS as the base
#    class for "almost up-to-date" translators.
#  - $doxygenrootdir and other global variables for storing 
#    directories determined from DOXYGEN_DOCDIR environment 
#    variable. The change was done because the DOXYGEN_DOCDIR
#    was already used before.
#  - $version mark can be used in the language.tpl template.
#
# 2001/05/18
#  - Character entity ø recognized in maintainers.txt.
#
# 2001/06/06
#  - Implementation of the methods recognized even when the
#    argument list does not contain argument identifiers 
#    (i.e., when it contains type information only).
#
# 2001/06/11
#  - Character entity č recognized in maintainers.txt.
#
# 2001/07/17
#  - Perl version checking is less confusing now. The script stops
#    immediately after the first command below when your perl
#    is older that required.
#  - The information below the table of languages is not produced
#    with the table. Another symbol replacement is done, so language.tpl
#    can be updated so that the generated language.doc does not contain
#    the link to the translator_report.txt.
#
# 2001/08/20
#  - StripArgIdentifiers() enhanced to be more robust in producing
#    equal prototypes from the base class and from the derived
#    classes (if they should be considered equal).
#
# 2001/08/28
#  - "see details" added to the up-to-date translator list 
#    (in translator report) to translators for which some details
#    are listed below in the report.  This is usually the case
#    when the up-to-date translator still implements a obsolete
#    method that will never be called (i.e. the code should be removed).
#
# 2001/09/10
#  - The script now always exits with 0.  If the sources are not
#    found, translator report is not generated.  If the $flangdoc
#    is not also found and no sources are available, the simplified
#    result with remarks inside is generated from the template.
#    The consequences, translator.pl should never break the "make",
#    and the language.doc should always be present after running
#    this script -- no problem should occur when generating doxygen
#    documentation.
#
# 2001/09/11
#  - Minor (say cosmetic) enhancement.  The code for generating
#    the simplified language.doc from the template was moved to 
#    the separate function CopyTemplateToLanguageDoc().
#
# 2001/10/17
#  - Minor update of GetInfoFrom() to ignore spaces between the
#    method identifier and the opening parenthesis to match better
#    the method prototype with the one in the translator.h.
#
# 2001/11/06
#  - TranslatorAdapterCVS is not used any more.  There is nothing
#    like "almost up-to-date" any more.  The script was simplified
#    to reflect the changes.  
#
# 2001/11/26
#  - Information about version of doxygen added to the top 
#    of the translator report (the ASCII file).
#  - TranslatorEnglish can be used to solve really obsolete translators
#    to make adapter classes simpler.  Such translators are marked
#    as "obsolete" in the status (i.e. no guessing when it was last updated).
#    The translator report include the notice about that situation.
#
################################################################

use 5.005;
use strict;
use Carp;

# Global variables
#
my $doxygenrootdir = 'directory set at the beginning of the body';
my $srcdir =         'directory set at the beginning of the body';
my $docdir =         'directory set at the beginning of the body';

my $doxversion =     'set at the beginning of the body';

# Names of the output files.
#
my $ftranslatortxt = "translator_report.txt";
my $flangdoc = "language.doc";

# Names of the template files and other intput files.
#
my $flangtpl = "language.tpl";         # template for language.doc
my $fmaintainers = "maintainers.txt";  # database of local lang. maintainers


################################################################
# GetPureVirtual returns the list of pure virtual method prototypes
# as separate strings (one prototype, one line, one list item).
# The input argument is the full name of the source file.
#
sub GetPureVirtualFrom  ##{{{
{
    my $fin = shift;  # Get the file name.
    
    # Let's open the file and read it into a single string.
    #
    open(FIN, "< $fin") or die "\nError when open < $fin: $!";
    my @content = <FIN>;
    close FIN;
    my $cont = join("", @content);
    
    # Remove comments and empty lines.
    #
    $cont =~ s{\s*//.*$}{}mg; # remove one-line comments
    while ($cont =~ s{/\*.+?\*/}{}sg ) {}   # remove C comments
    $cont =~ s{\n\s*\n}{\n}sg;  # remove empty lines    

    # Remove the beginning up to the first virtual method.
    # Remove also the text behind the class.
    #
    $cont =~ s/^.*?virtual/virtual/s;
    $cont =~ s/\n\};.*$//s;

    # Erase anything between "=0;" and "virtual". Only the pure 
    # virtual methods will remain.  Remove also the text behind 
    # the last "= 0;"
    #
    $cont =~ s{(=\s*0\s*;).*?(virtual)}{$1 $2}sg;
    $cont =~ s{^(.+=\s*0\s*;).*?$}{$1}s;
    
    # Remove the empty implementation of the updateNeededMessage() 
    # method which is to be implemented by adapters only, not by 
    # translators.
    #
    $cont =~ s{\s*virtual
               \s+QCString
               \s+updateNeededMessage\(\)
               \s+\{\s*return\s+"";\s*\}
              }
              {}xs;
    
    # Replace all consequent white spaces (including \n) by a single 
    # space. Trim also the leading and the trailing space.
    #
    $cont =~ s{\s+}{ }sg;
    $cont =~ s{^\s+}{}s;
    $cont =~ s{\s+$}{}s;
    
    # Split the result to the lines again.  Remove the "= 0;".
    #
    $cont =~ s{\s*=\s*0\s*;\s*}{\n}sg;
    
    # Remove the keyword "virtual" because the derived classes 
    # may not use it.
    #
    $cont =~ s{^virtual\s+}{}mg;
    
    # Split the string into array of lines and return it as
    # the output list.
    #
    return split(/\n/, $cont);
}
##}}}


################################################################
# StripArgIdentifiers takes a method prototype (one line string),
# removes the argument identifiers, and returns only the necessary
# form of the prototype.
#
sub StripArgIdentifiers  ##{{{
{
    my $prototype = shift;  # Get the prototype string.
    
    # Extract the list of arguments from the prototype.
    #
    $prototype =~ s{^(.+\()(.*)(\).*)$}{$1#ARGS#$3};
    my $a = (defined $2) ? $2 : '';
    
    # Split the list of arguments.
    #
    my @a = split(/,/, $a);
    
    # Strip each of the arguments.
    #
    my @stripped = ();
    
    foreach my $arg (@a) {
        
        # Only the type of the identifier is important...
        #
        $arg =~ s{^(\s*             # there can be spaces behind comma,
                    (const\s+)?     # possibly const at the beginning
                    [A-Za-z0-9_:]+  # type identifier can be qualified
                    (\s*[*&])?      # could be reference or pointer
                   )                # ... the above is important,
                  .*$               # the rest contains the identifier 
                 }
                 {$1}x;             # remember only the important things
        
        # People may differ in opinion whether a space should
        # or should not be written between a type identifier and 
        # the '*' or '&' (when the argument is a pointer or a reference).
        #
        $arg =~ s{\s*([*&])}{ $1};
        
        # Whitespaces are not only spaces. Moreover, the difference
        # may be in number of them in a sequence or in the type 
        # of a whitespace. This is the reason to replace each sequence
        # of whitespace by a single, real space.
        #
        $arg =~ s{\s+}{ }g;
        
        # Remember the stripped form of the arguments
        push(@stripped, $arg); 
    }
    
    # Join the stripped arguments into one line again, and 
    # insert it back.
    #
    $a = join(',', @stripped);
    $prototype =~ s{#ARGS#}{$a};
    
    # Finally, return the stripped prototype.
    # 
    return $prototype;
}
##}}}


################################################################
# GetInfoFrom returns the list of information related to the
# parsed source file.  The input argument is the name of the 
# translator_xx.h file including path. 
#
# The output list contains the following items:
#  - class identifier
#  - base class identifier
#  - method prototypes (each in a separate item)
#
sub GetInfoFrom  ##{{{
{
    # Get the file name.
    #
    my $fin = shift;

    # Let's open the file and read it into a single string.
    #
    open(FIN, "< $fin") or die "\nError when open < $fin: $!";
    my @content = <FIN>;
    close FIN;
    my $cont = join("", @content);
    
    # Remove comments and empty lines.
    #
    $cont =~ s{\s*//.*$}{}mg;    # remove one-line comments
    $cont =~ s{/\*.+?\*/}{}sg;   # remove C comments
    $cont =~ s{\n\s*\n}{\n}sg;   # remove empty lines    

    # Extract the class and base class identifiers.  Remove the 
    # opening curly brace.  Remove also the first "public:"
    # Put the class and the base class into the output list.
    #
    $cont =~ s{^.*class\s+(Translator\w+)[^:]*:
                \s*public\s+(\w+)\b.*?\{\s*
                (public\s*:\s+)?
              }
              {}sx;
    
    @content = ($1, $2);
    
    # Cut the things after the class.
    #
    $cont =~ s{\}\s*;\s*#endif\s*$}{}s;
    
    # Remove the "virtual" keyword, because some the derived class
    # is not forced to use it.
    #
    $cont =~ s{^\s*virtual\s+}{}mg;

    # Remove all strings from lines.
    #
    $cont =~ s{".*?"}{}mg;
    
    # Remove all bodies of methods;
    #
    while ($cont =~ s/{[^{}]+?}//sg) {}
    
    # Remove all private methods, i.e. from "private:" to "public:"
    # included.  Later, remove also all from "private:" to the end.
    #
    $cont =~ s{private\s*:.*?public\s*:}{}sg;
    $cont =~ s{private\s*:.*$}{}s;

    # Some of the translators use conditional compilation where 
    # the branches define the body of the method twice.  Remove
    # the ifdef/endif block content.
    # 
    $cont =~ s{#ifdef.*?#endif}{}sg;
    
    # Now the string should containt only method prototypes.
    # Let's unify their format by removing all spaces that 
    # are not necessary.  Then let's put all of them on separate
    # lines (one protototype -- one line; no empty lines).
    #
    $cont =~ s{\s+}{ }sg;
    $cont =~ s{^\s+}{}s;
    $cont =~ s{\s+$}{}s;
    
    $cont =~ s{\s+\(}{(}g;
    $cont =~ s{\)\s*}{)\n}g;
    
    # Split the string and add it to the ouptut list.
    #
    @content = (@content, split(/\n/, $cont));
    return @content;
}
##}}}


################################################################
# GenerateLanguageDoc takes document templates and code sources
# generates the content as expected in the $flangdoc file (the
# part of the Doxygen documentation), and returns the result as a
# string.
#
sub GenerateLanguageDoc ##{{{
{
    # Get the references to the hash of class/base class.
    #
    my $rcb = shift;
    
    # Define templates for HTML table parts of the documentation. #{{{
    #
    my $htmlTableHead = <<'xxxTABLE_HEADxxx';
\htmlonly
<TABLE ALIGN=center CELLSPACING=0 CELLPADDING=0 BORDER=0>
<TR BGCOLOR="#000000">
<TD>
  <TABLE CELLSPACING=1 CELLPADDING=2 BORDER=0>
  <TR BGCOLOR="#4040c0">
  <TD ><b><font size=+1 color="#ffffff"> Language </font></b></TD>
  <TD ><b><font size=+1 color="#ffffff"> Maintainer </font></b></TD>
  <TD ><b><font size=+1 color="#ffffff"> Contact address </font>
          <font size=-2 color="#ffffff">(remove the NOSPAM.)</font></b></TD>
  <TD ><b><font size=+1 color="#ffffff"> Status </font></b></TD>
  </TR>
xxxTABLE_HEADxxx
  
    my $htmlTableRow = <<'xxxTABLE_ROWxxx';
  <TR BGCOLOR="#ffffff">
      <TD>$lang</TD>  
      <TD>$maintainer</TD>
      <TD>$email</TD>
      <TD>$status</TD>
  </TR>
xxxTABLE_ROWxxx

    my $htmlTableFoot = <<'xxxTABLE_FOOTxxx';
  </TABLE>
</TD>
</TR>
</TABLE>
\endhtmlonly
xxxTABLE_FOOTxxx
    ##}}}
    
    # Define templates for LaTeX table parts of the documentation. #{{{
    #
    my $latexTableHead = <<'xxxTABLE_HEADxxx';
\latexonly
\begin{tabular}{|l|l|l|l|}
  \hline 
  {\bf Language} & {\bf Maintainer} & {\bf Contact address} & {\bf Status} \\
  \hline
xxxTABLE_HEADxxx
  
    my $latexTableRow = <<'xxxTABLE_ROWxxx';
  $lang & $maintainer & {\tt $email} & $status \\
xxxTABLE_ROWxxx

    my $latexTableFoot = <<'xxxTABLE_FOOTxxx';
  \hline
\end{tabular}
\endlatexonly
xxxTABLE_FOOTxxx
    ##}}}
    
    # Read the template of the documentation, and join the content
    # to a single string. #{{{
    #
    my $fin = "$docdir/$flangtpl";
    open(FIN, "< $fin") or die "\nError when open < $fin: $!";
    my @content = <FIN>;
    close FIN;
    
    my $output = join("", @content);
    ##}}}
    
    # Make and substitute the list of supported languages and their
    # number. #{{{
    #
    my @languages = sort grep { s{^Translator}{} } keys %{$rcb};
    
    my $numlang = @languages;
    
    $output =~ s{\$numlang}{$numlang};
    
    my $languages =  join(", ", @languages);
    $languages =~ s{((\w+,\s){5})}{$1\n}g;
    $languages =~ s{Brazilian}{Brazilian Portuguese};
    $languages =~ s{(,\s+)(\w+)$}{$1and $2}s;
    
    $output =~ s{\$languages}{$languages};
    ##}}}

    # Create the hash of languages with the initial info. #{{{
    #
    my %language = ();
    
    foreach (@languages) {
        $language{$_} = $$rcb{"Translator$_"} . "<msep/>unknown: unknown";
    }
    ##}}}
    
    # Read the information related to maintainers into the
    # string using suitable separators -- one line, one language. #{{{
    #
    $fin = "$docdir/$fmaintainers";
    open(FIN, "< $fin") or die "\nError when open < $fin: $!";
    my @maintainers = <FIN>;
    close FIN;
    
    my $maintainers = join("", @maintainers);

    # Trim the spaces on the lines.  Strip the comment lines that
    # start with % sign.
    #
    $maintainers =~ s{^[ \t]+}{}mg;    
    $maintainers =~ s{[ \t]+$}{}mg;
    
    $maintainers =~ s{^%.*$}{}mg;

    # Join the information for one language into one line,
    # and remove empty lines.
    #
    $maintainers =~ s{\b\n\b}{<sep/>}sg;
    $maintainers =~ s{\n{2,}}{\n}sg;    
    $maintainers =~ s{^\n+}{}s;
    $maintainers =~ s{\n+$}{}s;
    ##}}}
    
    # Split the string back to the list, and update the information
    # in the hash with information for languages. #{{{
    #
    foreach my $line (sort split(/\n/, $maintainers)) {
        
        # Split the line for one language to separate lines for
        # the language and one or more maintainers.
        #
        my @info = split(/<sep\/>/, $line);
        
        my $lang = shift @info;
        
        # Ensure that the language starts with uppercase and 
        # continues with lowercase.
        #
        $lang =~ s{^(\w)(\w+)}{\U$1\L$2\E};

        # Add information to the %language hash.  If the language
        # was not defined in sources, add the question mark to the
        # language identifier.
        # 
        if (defined $language{$lang}) { 
            $language{$lang} = $$rcb{"Translator$lang"} . '<msep/>' 
                               . join("<sep/>", @info);
        }
        else {
            $lang .= " (?)";
            $language{$lang} = "unknown<msep/>" . join("<sep/>", @info);
        }
    }
    ##}}}

    # Now, the %language hash contains all the information needed for
    # generating the tables (HTML and LaTeX).  Define string variables
    # for each of the tables, and initialize them.  #{{{
    #
    my $tableHTML = $htmlTableHead;
    my $tableLATEX = $latexTableHead;
    ##}}}
    
    # Loop through sorted keys for the languages, parse the
    # information, and add it to the tables. #{{{
    #
    foreach my $lang (sort keys %language) {
        
        # Read the line with info for the language and separate 
        # the status. #{{{
        #
        my @list = split(/<msep\/>/, $language{$lang});
        my $status = shift @list;
        
        my $i = $status =~ s{^Translator$}{up-to-date};

        if ($i == 0) { 
            $i = $status =~ s{^TranslatorAdapter_(\d)_(\d)_(\d)}
                             {$1.$2.$3}x;
        }
        
        if ($i == 0) { 
            $i = $status =~ s{^TranslatorEnglish$}
                             {obsolete}x;
        }
        
        if ($i == 0) { $status = 'strange'; }
        
        ##}}}
        
        # Split the rest of the list (should be a single item) into
        # the list with one or more maintainers -- one line, one
        # maintainer. #{{{
        #
        my $rest = shift @list;
        @list = split(/<sep\/>/, $rest);
        ##}}}
        
        # In HTML table, maintainer names are placed in the same
        # cell.  Also their e-mails are placed in a single cell.
        # Extract the string with concatenated names and the string
        # with concatenated e-mails.  Add the row to the HTML
        # table. #{{{
        #
        my $name = '';
        my $email = '';

        foreach my $maintainer (@list) {
        
            if ($name ne '') { $name .= '<br>'; }
            if ($email ne '') { $email .= '<br>'; }

            $maintainer =~ m{^\s*(.+?)\s*:\s*(.+?)\s*$};
        
            $name .= $1;
            $email .= $2;
        }
        
        # Prepare the HTML row template, modify it, and add the
        # result to the HTML table.
        #
        my $item = $htmlTableRow;
        
        $item =~ s{\$lang}{$lang};
        $item =~ s{\$maintainer}{$name};
        $item =~ s{\$email}{$email};
        $item =~ s{\$status}{$status};
        
        $tableHTML .= $item;        
        
        ##}}}
        
        # For LaTeX, more maintainers for the same language are
        # placed on separate rows in the table.  The line separator
        # in the table is placed explicitly above the first
        # maintainer.  Add rows for all maintainers to the LaTeX
        # table. #{{{
        #
        # Prepare the LATEX row template, modify it, and add the
        # result to the LATEX table.
        #
        $item = $latexTableRow;

        my $first = shift @list;  # the first maintainer.
        $first =~ m{^\s*(.+?)\s*:\s*(.+?)\s*$};
        
        $name = $1;
        $email = $2;
        
        $item =~ s{\$lang}{$lang};
        $item =~ s{\$maintainer}{$name};
        $item =~ s{\$email}{$email};
        $item =~ s{\$status}{$status};
        
        $tableLATEX .= "  \\hline\n" . $item;        
        
        # List the other maintainers for the language. Do not set
        # lang and status for them.
        #
        while (@list) {
            my $next = shift @list;
            $next =~ m{^\s*(.+?)\s*:\s*(.+?)\s*$};
        
            my $name = $1;
            my $email = $2;
            my $item = $latexTableRow;
        
            $item =~ s{\$lang}{};
            $item =~ s{\$maintainer}{$name};
            $item =~ s{\$email}{$email};
            $item =~ s{\$status}{};
        
            $tableLATEX .= $item;        
        }
        ##}}}
    }
    ##}}}
    
    # Finish the tables, and substitute the mark in the doc
    # template by the concatenation of the tables.  Add NOSPAM to
    # email addresses in the HTML table.  Replace the special
    # character sequences. #{{{
    #
    $tableHTML .= $htmlTableFoot;
    $tableLATEX .= $latexTableFoot;

    $tableHTML =~ s{@}{\@NOSPAM.}sg; 
    $tableHTML =~ s{&ccaron;}{&#x010d;}sg; 
    $tableHTML =~ s{&rcaron;}{&#x0159;}sg; 
    
    $tableLATEX =~ s/&aacute;/\\'{a}/sg;
    $tableLATEX =~ s/&auml;/\\"{a}/sg;
    $tableLATEX =~ s/&ouml;/\\"{o}/sg;
    $tableLATEX =~ s/&oslash;/\\o{}/sg;
    $tableLATEX =~ s/&ccaron;/\\v{c}/sg;
    $tableLATEX =~ s/&rcaron;/\\v{r}/sg;
    $tableLATEX =~ s/_/\\_/sg;
    
    $output =~ s{\$information_table}{$tableHTML$tableLATEX};

    ##}}}

    # Replace the other symbols in the template by the expected
    # information. ##{{{
    #
    $output =~ s{\$version}{$doxversion};

    $output =~ s{\$translator_report_file_name}
                {<code>doxygen/doc/$ftranslatortxt</code>}x;

    $output =~ s{\$translator_report_link}
                {<a href=\"../doc/$ftranslatortxt\">
                 <code>doxygen/doc/$ftranslatortxt</code></a>}x;
    ##}}}

    # Replace the introduction notice in the output. #{{{
    #
    $output =~ s{<notice>.+?</notice>}
{Warning: this file was generated from the $flangtpl template
 *          and the $fmaintainers files by the $0 script.  
 *
 *          Do not edit this file.  Edit the above mentioned files!}sx;
    ##}}}

    # Return the content of the generated output file.
    #
    return $output;
}
##}}}

################################################################
# CopyTemplateToLanguageDoc takes the $flangtpl template and 
# generates $flangdoc without using information from other
# sources.  This function is called when source files were not found.
# The marks inside the template are replaced by warning-like
# explanations that something could not be done because sources
# were not available.  Writes directly to the file, returns nothing.
#
sub CopyTemplateToLanguageDoc ##{{{
{
    # The template file will be the source.
    #
    my $fin = "$docdir/$flangtpl"; 
            
    # Let's open the template and read it all into one string.
    #
    open(FIN, "< $fin") or die "\nError when open < $fin: $!";
    my @content = <FIN>;
    close FIN;
    my $cont = join("", @content);
    
    # Replace the template marks by some notices.
    #
    $cont =~ s{<notice>.+?</notice>}
{Warning: this file was generated from the $flangtpl template 
 *          by the $0 script.  As doxygen sources were not available 
 *          in that time, some information could not be extracted 
 *          and inserted into this file.
 *
 *          Do not edit this file.  Edit the above mentioned files!}sx;
            
    $cont =~ s{\$version}{$doxversion};
            
    $cont =~ s{\$numlang}
  {<b>[number of supported languages could not be extracted -- no sources]</b>};
            
    $cont =~ s{\$languages}
        {<b>[names of languages could not be extracted -- no sources]</b>};
            
    $cont =~ s{\$information_table}
        {<b>[Information table could not be extracted -- no sources.]</b>};
            
    $cont =~ s{\$translator_report_file_name}
        {$ftranslatortxt <b>[translator report could not be 
         generated -- no sources]</b>}x;
            
    $cont =~ s{\$translator_report_link}{<b>[no sources, no link]</b>};
            
    # Let's open the output file and copy the template content there.
    #
    my $fout = "$docdir/$flangdoc";
            
    open(FOUT, "> $fout") or die "\nError when open > $fout: $!";
    print FOUT $cont;
    close FOUT;
}
##}}}


################################################################
# Body
#
{
    # Set the content of global variables using the environment
    # variables. #{{{
    #
    $docdir = (defined $ENV{'DOXYGEN_DOCDIR'}) 
                ? $ENV{'DOXYGEN_DOCDIR'} : '.';
    
    $docdir =~ s{\\}{/}g;
    $docdir =~ s{/$}{};
    
    $doxygenrootdir = ($docdir eq '.') ? '..' : $docdir;
    $doxygenrootdir =~ s{/doc$}{};

    $srcdir = "$doxygenrootdir/src";

=pod
# Show the environment variables (for debugging only). 
#
foreach (sort keys %ENV) { print STDERR "$_=$ENV{$_}\n"; }
print STDERR "\n\n"; 
=cut
    
    $doxversion = (defined $ENV{'VERSION'}) ? $ENV{'VERSION'} : 'unknown';

    ##}}}
    
    # The translator base class must be present.  Exit otherwise,
    # but be kind to those who already have the documentation
    # generated by this script ready, but who do not have sources. 
    # If no $flangdoc is present, copy the template to it. #{{{
    #
    if (!-f "$srcdir/translator.h") {
        print STDERR "\nThe $0 warning:\n"
                     . "\tThe translator.h not found in $srcdir.\n"
                     . "\tThe $ftranslatortxt will not be "
                     . "generated (you don't need it).\n";

        # $flangdoc is present, copy the template to it.
        #
        if (!-f "$docdir/$flangdoc") {

            # Copy the template document to $flandoc with simplified
            # replacement of the markers inside the template.
            #
            CopyTemplateToLanguageDoc();
            
            # Generate the warning about $flangdoc content.
            #
            print STDERR "\nThe $0 warning:\n"
                . "\tThe $flangdoc not found in the '$docdir' directory.\n"
                . "\tThe $flangtpl template content copied into it.\n"
                . "\tAs the sources are not available, some information\n"
                . "\tcould not be extracted and inserted into $flangdoc.\n";
        }
        
        # Exit as if nothing happened.
        #
        exit 0;
    }
    ##}}}

    # Find all translator_xx.h file names. #{{{
    #
    my @entries = ();  # init

    opendir DIR, $srcdir or confess "opendir error for $srcdir: $!";
    foreach (readdir(DIR)) { if (!/^\./) { push @entries, $_; } }
    closedir DIR;          # ignore names with dot at the beginning

    my @files = sort 
                grep { -f "$srcdir/$_" && m{^translator_..\.h$}i } 
                @entries;
    ##}}}
    
    # Get only the pure virtual methods from the Translator class
    # into a hash structure for later testing present/not present.
    #
    my @expected = GetPureVirtualFrom("$srcdir/translator.h");

    # The details for translators will be collected into the output
    # string. If some details are listed for a translator, the flag
    # will be set to produce possible warning to the list of
    # up-to-date translators.
    #
    my $output = '';
    my %details = ();

    # Remove the argument identifiers from the method prototypes
    # to get only the required form of the prototype. Fill the
    # hash with them. #{{{
    #
    my %required = ();
    
    foreach (@expected) {
        my $prototype = StripArgIdentifiers($_);
        $required{$prototype} = 1;
    }
    ##}}}
    
    # Collect base classes of translators in the hash. CB stands
    # for Class and Base.
    #
    my %cb = ();
    
    # Loop through all translator files.  Extract the implemented
    # virtual methods and compare it with the requirements. Prepare
    # the output.
    #
    foreach (@files) {                               

        # Get the information from the sources.  Remember the base
        # class for each of the classes.  Clear the flag for
        # details for the class. #{{{
        #
        my @info = GetInfoFrom("$srcdir/$_");
        
        my $class = shift @info;
        my $base = shift @info;

        $cb{$class} = $base;
        $details{$class} = 0;
        
        ##}}}
        
        # Set the value of the required methods to 1 (true).  Let
        # this indicate that the method was not defined in the
        # translator class.
        #
        foreach (keys %required) { $required{$_} = 1; }
        
        # Loop through all items and compare the prototypes. Mark
        # the implemented method and collect the old ones.  #{{{
        #
        my @old_methods = ();

        foreach my $implemented (@info) {
            
            # Get only the necessary form of the prototype.
            #
            my $prototype = StripArgIdentifiers($implemented);
            
            # Mark as recognized when the prototype is required.
            # Otherwise, remember it as old method which is
            # implemented, but not required.
            #
            if (defined $required{$prototype}) { 
                $required{$prototype} = 0; 
            }
            else {
                push(@old_methods, $implemented); 
            }
        }
        ##}}}

        # Loop through the list of expected methods and collect 
        # the missing (new) methods.  Do this only when it derives
        # from Translator or TranslatorAdapter classes (i.e. ignore
        # any unusual kind of TranslatorXxxx implementation). 
        # Accept also deriving from TranslatorEnglish, that can
        # be done by doxygen developers to solve problems with
        # some really outdated translators. #{{{
        #
        my @missing_methods = ();
        
        if ($base =~ m/^Translator(Adapter.*)?$/
            || $base =~ m/^TranslatorEnglish$/) {
            foreach my $method (@expected) {
                
                # Get the stripped version of the prototype.
                #
                my $prototype = StripArgIdentifiers($method); 
                
                # If the prototype is stored in the %required
                # table, and if it was not marked as implemented,
                # then it should be.  It is a missing method.
                #
                if (defined $required{$prototype} && $required{$prototype}) { 
                    push(@missing_methods, $method); 
                }
            }
        }
        ##}}}

        # The detailed output will be produced only when it is
        # needed. #{{{
        #
        if (@old_methods || @missing_methods
            || $base !~ m/^Translator(Adapter.*)?$/) {

            $output .= "\n\n\n";
            $output .= $class . " ($base)\n" . '-' x length($class) . "\n";
            
            if ($base =~ m/^TranslatorEnglish$/) {
                $output .= "\nThis translator is implemented via deriving "
                         . "from the English translator.\n"
                         . "This should be done only in the case when "
                         . "the language maintainer\n"
                         . "or the doxygen "
                         . "developers need to update some really old-dated "
                         . "translator.\n"
                         . "Otherwise, deriving from "
                         . "the translator adapter classes should be used\n"
                         . "for obsolete translators.  "
                         . "If you still want some texts to be in English\n"
                         . "copy the sources of the English translator.\n\n"
                         . "The obsolete and missing method lists (below) "
                         . "reflect what have to be done\n"
                         . "to derive "
                         . "directly from the Translator class "
                         . "(i.e. to reach up-to-date status).\n";
            }
            elsif ($base !~ m/^Translator(Adapter.*)?$/) {
                $output .= "\nThis is some unusual implementation of the "
                         . "translator class.  It is derived\n"
                         . "from the $base base class. The usual translator"
                         . "class derives\n"
                         . "or from the Translator class or from some "
                         . "TranslatorAdapter_x_x_x classes.\n"
                         . "Because of that, nothing can be guessed about "
                         . "missing or obsolete methods.\n";
            }
                
            if (@missing_methods) {
                $output .= "\nMissing methods (should be implemented):\n\n";
                foreach (@missing_methods) { $output .= "  $_\n"; }
            }    

            if (@old_methods) {
                $output .= "\nObsolete methods (should be removed):\n\n";
                foreach (sort @old_methods) { $output .= "  $_\n"; }
            }
                
            # Some details were listed, set the details flag for
            # the class.
            #
            $details{$class} = 1;
        }
        ##}}}
    }

    
    # Generate the ASCII output file.
    #
    my $fout = "$docdir/$ftranslatortxt";
    
    # Open it first, and output the version information. #{{{
    #
    open(FOUT, "> $fout") or die "\nError when open > $fout: $!";

    print FOUT "(version $doxversion)\n\n";
    ##}}}
    
    # List the supported languages. #{{{
    #
    my @all_translators = keys %cb;

    print FOUT "Doxygen supports the following (" . @all_translators
             . ") languages (sorted alphabetically):\n\n";

    my @languages = sort 
                    grep { s/^Translator(\w+)\b.*$/$1/ } 
                    @all_translators;

    my $languages =  join(", ", @languages);
    $languages =~ s{((\w+,\s){5})}{$1\n}g;
    $languages =~ s{Brazilian}{Brazilian Portuguese};
    $languages =~ s{(,\s+)(\w+)$}{$1and $2.}s;

    print FOUT "$languages\n";
    ##}}}

    # If there are up-to-date translators, list them.  #{{{
    #
    my @list = sort grep { $cb{$_} =~ m/^Translator$/ } keys %cb;    
    
    if (@list) {
        print FOUT "\n" .'-' x 70 . "\n";
        print FOUT "The following translator classes are up-to-date " 
                 . "(sorted alphabetically).\n"
                 . "This means that they derive from the Translator class.  "
                 . "Anyway, there still\n"
                 . "may be some details listed even for "
                 . "the up-to-date translators.\n"
                 . "Please, check the text below if the translator "
                 . "is marked so.\n\n";
        
        foreach (@list) { 
            
            # Print the class name.
            #
            print FOUT "  $_";
            
            # If some details were listed for the translator class,
            # add a notice.
            #
            if ($details{$_}) {
                print FOUT "\t-- see details below in the report"; 
            }
            
            print FOUT "\n"; 
        }
    }
    ##}}}

    # If there are obsolete translators, list them.  #{{{
    #
    @list = sort grep { $cb{$_} =~ m/^TranslatorAdapter_/ } keys %cb;

    if (@list) {
        print FOUT "\n" .'-' x 70 . "\n";
        print FOUT "The following translator classes are obsolete "
                 . "(sorted alphabetically).\n"
                 . "This means that they derive from some of " 
                 . "the adapter classes.\n\n";
        
        foreach (@list) { print FOUT "  $_\t($cb{$_})\n"; }        
    }
    ##}}}

    # If there are translators derived from TranslatorEnglish, list them
    # and name them as obsolete. #{{{
    #
    @list = sort grep { $cb{$_} =~ m/^TranslatorEnglish$/ } keys %cb;

    if (@list) {
        print FOUT "\n" .'-' x 70 . "\n";
        print FOUT "The following translator classes are implemented "
                 . "via deriving\n"
                 . "from the English translator.  This should be done only "
                 . "in the case\n"
                 . "when the language maintainer or the doxygen "
                 . "developers need to update\n"
                 . "some really outdated translator.  Otherwise, deriving "
                 . "from\n"
                 . "the translator adapter classes should be prefered "
                 . "for obsolete translators.\n"
                 . "See details below in the report.\n\n";
        
        foreach (@list) { print FOUT "  $_\t($cb{$_})\n"; }        
    }
    ##}}}
    
    # If there are other translators, list them. #{{{
    #
    @list = sort 
            grep { $cb{$_} !~ m/^Translator$/ } 
            grep { $cb{$_} !~ m/^TranslatorAdapter_/ }
            grep { $cb{$_} !~ m/^TranslatorEnglish$/ }     
            keys %cb;

    if (@list) {
        print FOUT "\n" .'-' x 70 . "\n";
        print FOUT "The following translator classes are somehow different\n"
                 . "(sorted alphabetically).  This means that they "
                 . "do not derive from\n"
                 . "the Translator class, nor from some of the adapter "
                 . "classes,\n"
                 . "nor from the TranslatorEnglish.  Nothing can be guessed "
                 . "about the methods.\n\n";

        foreach (@list) { print FOUT "  $_\t($cb{$_})\n"; }        
    }
    ##}}}


    # List the methods that are expected to be implemented.  #{{{
    #
    print FOUT "\n\n" .'-' x 70 . "\n";
    print FOUT "Localized translators are expected to implement "
             . "the following methods\n"
             . "(prototypes sorted aplhabetically):\n\n";

    foreach (sort @expected) {
        print FOUT "$_\n";
    }
    ##}}}

    # If there are some details for the translators, show them.  #{{{
    #
    if ($output !~ m/^\s*$/) {
        print FOUT "\n\n" .'=' x 70 . "\n";
        print FOUT "Details related to specific translator classes follow.\n";

        print FOUT $output . "\n";
    }
    ##}}}

    # Close the ASCII output file
    #
    close FOUT;

    # Generate the language.doc file.  
    #
    $fout = "$docdir/$flangdoc";
    
    # Open it first for the output.
    #
    open(FOUT, "> $fout") or die "\nError when open > $fout: $!";

    print FOUT GenerateLanguageDoc(\%cb);

    # Close the output file
    #
    close FOUT;

    
    exit 0;
}
# end of body
################################################################