path: root/src/configoptions.cpp

/* WARNING: This file is generated!
 * Do not edit this file, but edit config.xml instead and run
 * python configgen.py to regenerate this file!
 */

#include "configoptions.h"
#include "config.h"
#include "portable.h"
#include "settings.h"

void addConfigOptions(Config *cfg)
{
	 ConfigString *cs;
	 ConfigEnum   *ce;
	 ConfigList   *cl;
	 ConfigInt    *ci;
	 ConfigBool   *cb;

	 //---------------------------------------------------------------------------
	 cfg->addInfo("Project","Project related configuration options");
	 //---------------------------------------------------------------------------

	 //----
	 cs = cfg->addString(
			"DOXYFILE_ENCODING",
			"This tag specifies the encoding used for all characters in the config file  that follow. The default is UTF-8 which is also the encoding used for all  text before the first occurrence of this tag. Doxygen uses libiconv (or the  iconv built into libc) for the transcoding. See  http://www.gnu.org/software/libiconv for the list of possible encodings."
		       );
	 cs->setDefaultValue("UTF-8");
	 //----
	 cs = cfg->addString(
			"PROJECT_NAME",
			"The PROJECT_NAME tag is a single word (or sequence of words) that should  identify the project. Note that if you do not use Doxywizard you need  to put quotes around the project name if it contains spaces."
		       );
	 cs->setDefaultValue("My Project");
	 //----
	 cs = cfg->addString(
			"PROJECT_NUMBER",
			"The PROJECT_NUMBER tag can be used to enter a project or revision number.  This could be handy for archiving the generated documentation or  if some version control system is used."
		       );
	 //----
	 cs = cfg->addString(
			"PROJECT_BRIEF",
			"Using the PROJECT_BRIEF tag one can provide an optional one line description  for a project that appears at the top of each page and should give viewer  a quick idea about the purpose of the project. Keep the description short."
		       );
	 //----
	 cs = cfg->addString(
			"PROJECT_LOGO",
			"With the PROJECT_LOGO tag one can specify an logo or icon that is  included in the documentation. The maximum height of the logo should not  exceed 55 pixels and the maximum width should not exceed 200 pixels.  Doxygen will copy the logo to the output directory."
		       );
	 cs->setWidgetType(ConfigString::File);
	 //----
	 cs = cfg->addString(
			"OUTPUT_DIRECTORY",
			"The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute)  base path where the generated documentation will be put.  If a relative path is entered, it will be relative to the location  where doxygen was started. If left blank the current directory will be used."
		       );
	 cs->setWidgetType(ConfigString::Dir);
	 //----
	 cb = cfg->addBool(
			"CREATE_SUBDIRS",
			"If the CREATE_SUBDIRS tag is set to YES, then doxygen will create  4096 sub-directories (in 2 levels) under the output directory of each output  format and will distribute the generated files over these directories.  Enabling this option can be useful when feeding doxygen a huge amount of  source files, where putting all generated files in the same directory would  otherwise cause performance problems for the file system.",
			FALSE
		       );
	 //----
	 ce = cfg->addEnum(
			"OUTPUT_LANGUAGE",
			"The OUTPUT_LANGUAGE tag is used to specify the language in which all  documentation generated by doxygen is written. Doxygen will use this  information to generate all constant output in the proper language.  The default language is English, other supported languages are:  Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional,  Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German,  Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English  messages), Korean, Korean-en, Latvian, Lithuanian, Norwegian, Macedonian,  Persian, Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrillic,  Slovak, Slovene, Spanish, Swedish, Ukrainian, and Vietnamese.",
			"English"
		       );
	 ce->addValue("Afrikaans");
	 ce->addValue("Arabic");
	 ce->addValue("Brazilian");
	 ce->addValue("Catalan");
	 ce->addValue("Chinese");
	 ce->addValue("Chinese-Traditional");
	 ce->addValue("Croatian");
	 ce->addValue("Czech");
	 ce->addValue("Danish");
	 ce->addValue("Dutch");
	 ce->addValue("English");
	 ce->addValue("Esperanto");
	 ce->addValue("Farsi");
	 ce->addValue("Finnish");
	 ce->addValue("French");
	 ce->addValue("German");
	 ce->addValue("Greek");
	 ce->addValue("Hungarian");
	 ce->addValue("Italian");
	 ce->addValue("Japanese");
	 ce->addValue("Japanese-en");
	 ce->addValue("Korean");
	 ce->addValue("Korean-en");
	 ce->addValue("Latvian");
	 ce->addValue("Norwegian");
	 ce->addValue("Macedonian");
	 ce->addValue("Persian");
	 ce->addValue("Polish");
	 ce->addValue("Portuguese");
	 ce->addValue("Romanian");
	 ce->addValue("Russian");
	 ce->addValue("Serbian");
	 ce->addValue("Slovak");
	 ce->addValue("Slovene");
	 ce->addValue("Spanish");
	 ce->addValue("Swedish");
	 ce->addValue("Turkish");
	 ce->addValue("Ukrainian");
	 ce->addValue("Vietnamese");
	 //----
	 cb = cfg->addBool(
			"BRIEF_MEMBER_DESC",
			"If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will  include brief member descriptions after the members that are listed in  the file and class documentation (similar to JavaDoc).  Set to NO to disable this.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"REPEAT_BRIEF",
			"If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend  the brief description of a member or function before the detailed description.  Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the  brief descriptions will be completely suppressed.",
			TRUE
		       );
	 //----
	 cl = cfg->addList(
			"ABBREVIATE_BRIEF",
			"This tag implements a quasi-intelligent brief description abbreviator  that is used to form the text in various listings. Each string  in this list, if found as the leading text of the brief description, will be  stripped from the text and the result after processing the whole list, is  used as the annotated text. Otherwise, the brief description is used as-is.  If left blank, the following values are used (\"$name\" is automatically  replaced with the name of the entity): \"The $name class\" \"The $name widget\"  \"The $name file\" \"is\" \"provides\" \"specifies\" \"contains\"  \"represents\" \"a\" \"an\" \"the\""
		       );
	 cl->addValue("The $name class");
	 cl->addValue("The $name widget");
	 cl->addValue("The $name file");
	 cl->addValue("is");
	 cl->addValue("provides");
	 cl->addValue("specifies");
	 cl->addValue("contains");
	 cl->addValue("represents");
	 cl->addValue("a");
	 cl->addValue("an");
	 cl->addValue("the");
	 //----
	 cb = cfg->addBool(
			"ALWAYS_DETAILED_SEC",
			"If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then  Doxygen will generate a detailed section even if there is only a brief  description.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"INLINE_INHERITED_MEMB",
			"If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all  inherited members of a class in the documentation of that class as if those  members were ordinary class members. Constructors, destructors and assignment  operators of the base classes will not be shown.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"FULL_PATH_NAMES",
			"If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full  path before files name in the file list and in the header files. If set  to NO the shortest path that makes the file name unique will be used.",
			TRUE
		       );
	 //----
	 cl = cfg->addList(
			"STRIP_FROM_PATH",
			"If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag  can be used to strip a user-defined part of the path. Stripping is  only done if one of the specified strings matches the left-hand part of  the path. The tag can be used to show relative paths in the file list.  If left blank the directory from which doxygen is run is used as the  path to strip. Note that you specify absolute paths here, but also  relative paths, which will be relative from the directory where doxygen is  started."
		       );
	 cl->addValue("");
	 cl->addDependency("FULL_PATH_NAMES");
	 //----
	 cl = cfg->addList(
			"STRIP_FROM_INC_PATH",
			"The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of  the path mentioned in the documentation of a class, which tells  the reader which header file to include in order to use a class.  If left blank only the name of the header file containing the class  definition is used. Otherwise one should specify the include paths that  are normally passed to the compiler using the -I flag."
		       );
	 //----
	 cb = cfg->addBool(
			"SHORT_NAMES",
			"If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter  (but less readable) file names. This can be useful if your file system  doesn't support long names like on DOS, Mac, or CD-ROM.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"JAVADOC_AUTOBRIEF",
			"If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen  will interpret the first line (until the first dot) of a JavaDoc-style  comment as the brief description. If set to NO, the JavaDoc  comments will behave just like regular Qt-style comments  (thus requiring an explicit @brief command for a brief description.)",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"QT_AUTOBRIEF",
			"If the QT_AUTOBRIEF tag is set to YES then Doxygen will  interpret the first line (until the first dot) of a Qt-style  comment as the brief description. If set to NO, the comments  will behave just like regular Qt-style comments (thus requiring  an explicit \\brief command for a brief description.)",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"MULTILINE_CPP_IS_BRIEF",
			"The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen  treat a multi-line C++ special comment block (i.e. a block of //! or ///  comments) as a brief description. This used to be the default behaviour.  The new default is to treat a multi-line C++ comment block as a detailed  description. Set this tag to YES if you prefer the old behaviour instead.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"INHERIT_DOCS",
			"If the INHERIT_DOCS tag is set to YES (the default) then an undocumented  member inherits the documentation from any documented member that it  re-implements.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"SEPARATE_MEMBER_PAGES",
			"If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce  a new page for each member. If set to NO, the documentation of a member will  be part of the file/class/namespace that contains it.",
			FALSE
		       );
	 //----
	 ci = cfg->addInt(
			"TAB_SIZE",
			"The TAB_SIZE tag can be used to set the number of spaces in a tab.  Doxygen uses this value to replace tabs by spaces in code fragments.",
			1,16,4
		       );
	 //----
	 cl = cfg->addList(
			"ALIASES",
			"This tag can be used to specify a number of aliases that acts  as commands in the documentation. An alias has the form \"name=value\".  For example adding \"sideeffect=\\par Side Effects:\\n\" will allow you to  put the command \\sideeffect (or @sideeffect) in the documentation, which  will result in a user-defined paragraph with heading \"Side Effects:\".  You can put \\n's in the value part of an alias to insert newlines."
		       );
	 //----
	 cl = cfg->addList(
			"TCL_SUBST",
			"This tag can be used to specify a number of word-keyword mappings (TCL only).  A mapping has the form \"name=value\". For example adding  \"class=itcl::class\" will allow you to use the command class in the  itcl::class meaning."
		       );
	 //----
	 cb = cfg->addBool(
			"OPTIMIZE_OUTPUT_FOR_C",
			"Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C  sources only. Doxygen will then generate output that is more tailored for C.  For instance, some of the names that are used will be different. The list  of all members will be omitted, etc.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"OPTIMIZE_OUTPUT_JAVA",
			"Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java  sources only. Doxygen will then generate output that is more tailored for  Java. For instance, namespaces will be presented as packages, qualified  scopes will look different, etc.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"OPTIMIZE_FOR_FORTRAN",
			"Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran  sources only. Doxygen will then generate output that is more tailored for  Fortran.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"OPTIMIZE_OUTPUT_VHDL",
			"Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL  sources. Doxygen will then generate output that is tailored for  VHDL.",
			FALSE
		       );
	 //----
	 cl = cfg->addList(
			"EXTENSION_MAPPING",
			"Doxygen selects the parser to use depending on the extension of the files it  parses. With this tag you can assign which parser to use for a given  extension. Doxygen has a built-in mapping, but you can override or extend it  using this tag. The format is ext=language, where ext is a file extension,  and language is one of the parsers supported by doxygen: IDL, Java,  Javascript, CSharp, C, C++, D, PHP, Objective-C, Python, Fortran, VHDL, C,  C++. For instance to make doxygen treat .inc files as Fortran files (default  is PHP), and .f files as C (default is Fortran), use: inc=Fortran f=C. Note  that for custom extensions you also need to set FILE_PATTERNS otherwise the  files are not read by doxygen."
		       );
	 //----
	 cb = cfg->addBool(
			"MARKDOWN_SUPPORT",
			"If MARKDOWN_SUPPORT is enabled (the default) then doxygen pre-processes all  comments according to the Markdown format, which allows for more readable  documentation. See http://daringfireball.net/projects/markdown/ for details.  The output of markdown processing is further processed by doxygen, so you  can mix doxygen, HTML, and XML commands with Markdown formatting.  Disable only in case of backward compatibilities issues.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"AUTOLINK_SUPPORT",
			"When enabled doxygen tries to link words that correspond to documented  classes, or namespaces to their corresponding documentation. Such a link can  be prevented in individual cases by by putting a % sign in front of the word  or globally by setting AUTOLINK_SUPPORT to NO.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"BUILTIN_STL_SUPPORT",
			"If you use STL classes (i.e. std::string, std::vector, etc.) but do not want  to include (a tag file for) the STL sources as input, then you should  set this tag to YES in order to let doxygen match functions declarations and  definitions whose arguments contain STL classes (e.g. func(std::string); v.s.  func(std::string) {}). This also makes the inheritance and collaboration  diagrams that involve STL classes more complete and accurate.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"CPP_CLI_SUPPORT",
			"If you use Microsoft's C++/CLI language, you should set this option to YES to  enable parsing support.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"SIP_SUPPORT",
			"Set the SIP_SUPPORT tag to YES if your project consists of sip sources only.  Doxygen will parse them like normal C++ but will assume all classes use public  instead of private inheritance when no explicit protection keyword is present.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"IDL_PROPERTY_SUPPORT",
			"For Microsoft's IDL there are propget and propput attributes to indicate  getter and setter methods for a property. Setting this option to YES (the  default) will make doxygen replace the get and set methods by a property in  the documentation. This will only work if the methods are indeed getting or  setting a simple type. If this is not the case, or you want to show the  methods anyway, you should set this option to NO.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"DISTRIBUTE_GROUP_DOC",
			"If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC  tag is set to YES, then doxygen will reuse the documentation of the first  member in the group (if any) for the other members of the group. By default  all members of a group must be documented explicitly.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"SUBGROUPING",
			"Set the SUBGROUPING tag to YES (the default) to allow class member groups of  the same type (for instance a group of public functions) to be put as a  subgroup of that type (e.g. under the Public Functions section). Set it to  NO to prevent subgrouping. Alternatively, this can be done per class using  the \\nosubgrouping command.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"INLINE_GROUPED_CLASSES",
			"When the INLINE_GROUPED_CLASSES tag is set to YES, classes, structs and  unions are shown inside the group in which they are included (e.g. using  @ingroup) instead of on a separate page (for HTML and Man pages) or  section (for LaTeX and RTF).",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"INLINE_SIMPLE_STRUCTS",
			"When the INLINE_SIMPLE_STRUCTS tag is set to YES, structs, classes, and  unions with only public data fields or simple typedef fields will be shown  inline in the documentation of the scope in which they are defined (i.e. file,  namespace, or group documentation), provided this scope is documented. If set  to NO (the default), structs, classes, and unions are shown on a separate  page (for HTML and Man pages) or section (for LaTeX and RTF).",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"TYPEDEF_HIDES_STRUCT",
			"When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum  is documented as struct, union, or enum with the name of the typedef. So  typedef struct TypeS {} TypeT, will appear in the documentation as a struct  with name TypeT. When disabled the typedef will appear as a member of a file,  namespace, or class. And the struct will be named TypeS. This can typically  be useful for C code in case the coding convention dictates that all compound  types are typedef'ed and only the typedef is referenced, never the tag name.",
			FALSE
		       );
	 //----
	 ci = cfg->addInt(
			"LOOKUP_CACHE_SIZE",
			"The size of the symbol lookup cache can be set using LOOKUP_CACHE_SIZE. This  cache is used to resolve symbols given their name and scope. Since this can  be an expensive process and often the same symbol appear multiple times in  the code, doxygen keeps a cache of pre-resolved symbols. If the cache is too  small doxygen will become slower. If the cache is too large, memory is wasted.  The cache size is given by this formula: 2^(16+LOOKUP_CACHE_SIZE). The valid  range is 0..9, the default is 0, corresponding to a cache size of 2^16 = 65536  symbols.",
			0,9,0
		       );
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Build","Build related configuration options");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"EXTRACT_ALL",
			"If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in  documentation are documented, even if no documentation was available.  Private class members and static file members will be hidden unless  the EXTRACT_PRIVATE respectively EXTRACT_STATIC tags are set to YES",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTRACT_PRIVATE",
			"If the EXTRACT_PRIVATE tag is set to YES all private members of a class  will be included in the documentation.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTRACT_PACKAGE",
			"If the EXTRACT_PACKAGE tag is set to YES all members with package or internal  scope will be included in the documentation.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTRACT_STATIC",
			"If the EXTRACT_STATIC tag is set to YES all static members of a file  will be included in the documentation.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTRACT_LOCAL_CLASSES",
			"If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs)  defined locally in source files will be included in the documentation.  If set to NO only classes defined in header files are included.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTRACT_LOCAL_METHODS",
			"This flag is only useful for Objective-C code. When set to YES local  methods, which are defined in the implementation section but not in  the interface are included in the documentation.  If set to NO (the default) only methods in the interface are included.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTRACT_ANON_NSPACES",
			"If this flag is set to YES, the members of anonymous namespaces will be  extracted and appear in the documentation as a namespace called  'anonymous_namespace{file}', where file will be replaced with the base  name of the file that contains the anonymous namespace. By default  anonymous namespaces are hidden.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"HIDE_UNDOC_MEMBERS",
			"If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all  undocumented members of documented classes, files or namespaces.  If set to NO (the default) these members will be included in the  various overviews, but no documentation section is generated.  This option has no effect if EXTRACT_ALL is enabled.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"HIDE_UNDOC_CLASSES",
			"If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all  undocumented classes that are normally visible in the class hierarchy.  If set to NO (the default) these classes will be included in the various  overviews. This option has no effect if EXTRACT_ALL is enabled.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"HIDE_FRIEND_COMPOUNDS",
			"If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all  friend (class|struct|union) declarations.  If set to NO (the default) these declarations will be included in the  documentation.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"HIDE_IN_BODY_DOCS",
			"If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any  documentation blocks found inside the body of a function.  If set to NO (the default) these blocks will be appended to the  function's detailed documentation block.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"INTERNAL_DOCS",
			"The INTERNAL_DOCS tag determines if documentation  that is typed after a \\internal command is included. If the tag is set  to NO (the default) then the documentation will be excluded.  Set it to YES to include the internal documentation.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"CASE_SENSE_NAMES",
			"If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate  file names in lower-case letters. If set to YES upper-case letters are also  allowed. This is useful if you have classes or files whose names only differ  in case and if your file system supports case sensitive file names. Windows  and Mac users are advised to set this option to NO.",
			portable_fileSystemIsCaseSensitive()
		       );
	 //----
	 cb = cfg->addBool(
			"HIDE_SCOPE_NAMES",
			"If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen  will show members with their full class and namespace scopes in the  documentation. If set to YES the scope will be hidden.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"SHOW_INCLUDE_FILES",
			"If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen  will put a list of the files that are included by a file in the documentation  of that file.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"FORCE_LOCAL_INCLUDES",
			"If the FORCE_LOCAL_INCLUDES tag is set to YES then Doxygen  will list include files with double quotes in the documentation  rather than with sharp brackets.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"INLINE_INFO",
			"If the INLINE_INFO tag is set to YES (the default) then a tag [inline]  is inserted in the documentation for inline members.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"SORT_MEMBER_DOCS",
			"If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen  will sort the (detailed) documentation of file and class members  alphabetically by member name. If set to NO the members will appear in  declaration order.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"SORT_BRIEF_DOCS",
			"If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the  brief documentation of file, namespace and class members alphabetically  by member name. If set to NO (the default) the members will appear in  declaration order.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"SORT_MEMBERS_CTORS_1ST",
			"If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen  will sort the (brief and detailed) documentation of class members so that  constructors and destructors are listed first. If set to NO (the default)  the constructors will appear in the respective orders defined by  SORT_MEMBER_DOCS and SORT_BRIEF_DOCS.  This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO  and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"SORT_GROUP_NAMES",
			"If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the  hierarchy of group names into alphabetical order. If set to NO (the default)  the group names will appear in their defined order.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"SORT_BY_SCOPE_NAME",
			"If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be  sorted by fully-qualified names, including namespaces. If set to  NO (the default), the class list will be sorted only by class name,  not including the namespace part.  Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES.  Note: This option applies only to the class list, not to the  alphabetical list.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"STRICT_PROTO_MATCHING",
			"If the STRICT_PROTO_MATCHING option is enabled and doxygen fails to  do proper type resolution of all parameters of a function it will reject a  match between the prototype and the implementation of a member function even  if there is only one candidate or it is obvious which candidate to choose  by doing a simple string match. By disabling STRICT_PROTO_MATCHING doxygen  will still accept a match between prototype and implementation in such cases.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"GENERATE_TODOLIST",
			"The GENERATE_TODOLIST tag can be used to enable (YES) or  disable (NO) the todo list. This list is created by putting \\todo  commands in the documentation.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"GENERATE_TESTLIST",
			"The GENERATE_TESTLIST tag can be used to enable (YES) or  disable (NO) the test list. This list is created by putting \\test  commands in the documentation.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"GENERATE_BUGLIST",
			"The GENERATE_BUGLIST tag can be used to enable (YES) or  disable (NO) the bug list. This list is created by putting \\bug  commands in the documentation.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"GENERATE_DEPRECATEDLIST",
			"The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or  disable (NO) the deprecated list. This list is created by putting  \\deprecated commands in the documentation.",
			TRUE
		       );
	 //----
	 cl = cfg->addList(
			"ENABLED_SECTIONS",
			"The ENABLED_SECTIONS tag can be used to enable conditional  documentation sections, marked by \\if section-label ... \\endif  and \\cond section-label ... \\endcond blocks."
		       );
	 //----
	 ci = cfg->addInt(
			"MAX_INITIALIZER_LINES",
			"The MAX_INITIALIZER_LINES tag determines the maximum number of lines  the initial value of a variable or macro consists of for it to appear in  the documentation. If the initializer consists of more lines than specified  here it will be hidden. Use a value of 0 to hide initializers completely.  The appearance of the initializer of individual variables and macros in the  documentation can be controlled using \\showinitializer or \\hideinitializer  command in the documentation regardless of this setting.",
			0,10000,30
		       );
	 //----
	 cb = cfg->addBool(
			"SHOW_USED_FILES",
			"Set the SHOW_USED_FILES tag to NO to disable the list of files generated  at the bottom of the documentation of classes and structs. If set to YES the  list will mention the files that were used to generate the documentation.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"SHOW_FILES",
			"Set the SHOW_FILES tag to NO to disable the generation of the Files page.  This will remove the Files entry from the Quick Index and from the  Folder Tree View (if specified). The default is YES.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"SHOW_NAMESPACES",
			"Set the SHOW_NAMESPACES tag to NO to disable the generation of the  Namespaces page.  This will remove the Namespaces entry from the Quick Index  and from the Folder Tree View (if specified). The default is YES.",
			TRUE
		       );
	 //----
	 cs = cfg->addString(
			"FILE_VERSION_FILTER",
			"The FILE_VERSION_FILTER tag can be used to specify a program or script that  doxygen should invoke to get the current version for each file (typically from  the version control system). Doxygen will invoke the program by executing (via  popen()) the command <command> <input-file>, where <command> is the value of  the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file  provided by doxygen. Whatever the program writes to standard output  is used as the file version. See the manual for examples."
		       );
	 cs->setWidgetType(ConfigString::File);
	 //----
	 cs = cfg->addString(
			"LAYOUT_FILE",
			"The LAYOUT_FILE tag can be used to specify a layout file which will be parsed  by doxygen. The layout file controls the global structure of the generated  output files in an output format independent way. To create the layout file  that represents doxygen's defaults, run doxygen with the -l option.  You can optionally specify a file name after the option, if omitted  DoxygenLayout.xml will be used as the name of the layout file."
		       );
	 cs->setWidgetType(ConfigString::File);
	 //----
	 cl = cfg->addList(
			"CITE_BIB_FILES",
			"The CITE_BIB_FILES tag can be used to specify one or more bib files  containing the references data. This must be a list of .bib files. The  .bib extension is automatically appended if omitted. Using this command  requires the bibtex tool to be installed. See also  http://en.wikipedia.org/wiki/BibTeX for more info. For LaTeX the style  of the bibliography can be controlled using LATEX_BIB_STYLE. To use this  feature you need bibtex and perl available in the search path. Do not use  file names with spaces, bibtex cannot handle them."
		       );
	 cl->setWidgetType(ConfigList::File);
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Messages","configuration options related to warning and progress messages");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"QUIET",
			"The QUIET tag can be used to turn on/off the messages that are generated  by doxygen. Possible values are YES and NO. If left blank NO is used.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"WARNINGS",
			"The WARNINGS tag can be used to turn on/off the warning messages that are  generated by doxygen. Possible values are YES and NO. If left blank  NO is used.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"WARN_IF_UNDOCUMENTED",
			"If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings  for undocumented members. If EXTRACT_ALL is set to YES then this flag will  automatically be disabled.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"WARN_IF_DOC_ERROR",
			"If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for  potential errors in the documentation, such as not documenting some  parameters in a documented function, or documenting parameters that  don't exist or using markup commands wrongly.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"WARN_NO_PARAMDOC",
			"The WARN_NO_PARAMDOC option can be enabled to get warnings for  functions that are documented, but have no documentation for their parameters  or return value. If set to NO (the default) doxygen will only warn about  wrong or incomplete parameter documentation, but not about the absence of  documentation.",
			FALSE
		       );
	 //----
	 cs = cfg->addString(
			"WARN_FORMAT",
			"The WARN_FORMAT tag determines the format of the warning messages that  doxygen can produce. The string should contain the $file, $line, and $text  tags, which will be replaced by the file and line number from which the  warning originated and the warning text. Optionally the format may contain  $version, which will be replaced by the version of the file (if it could  be obtained via FILE_VERSION_FILTER)"
		       );
	 cs->setDefaultValue("$file:$line: $text");
	 //----
	 cs = cfg->addString(
			"WARN_LOGFILE",
			"The WARN_LOGFILE tag can be used to specify a file to which warning  and error messages should be written. If left blank the output is written  to stderr."
		       );
	 cs->setWidgetType(ConfigString::File);
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Input","configuration options related to the input files");
	 //---------------------------------------------------------------------------

	 //----
	 cl = cfg->addList(
			"INPUT",
			"The INPUT tag can be used to specify the files and/or directories that contain  documented source files. You may enter file names like \"myfile.cpp\" or  directories like \"/usr/src/myproject\". Separate the files or directories  with spaces."
		       );
	 cl->addValue("");
	 cl->setWidgetType(ConfigList::FileAndDir);
	 //----
	 cs = cfg->addString(
			"INPUT_ENCODING",
			"This tag can be used to specify the character encoding of the source files  that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is  also the default input encoding. Doxygen uses libiconv (or the iconv built  into libc) for the transcoding. See http://www.gnu.org/software/libiconv for  the list of possible encodings."
		       );
	 cs->setDefaultValue("UTF-8");
	 //----
	 cl = cfg->addList(
			"FILE_PATTERNS",
			"If the value of the INPUT tag contains directories, you can use the  FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp  and *.h) to filter out the source-files in the directories. If left  blank the following patterns are tested:  *.c *.cc *.cxx *.cpp *.c++ *.d *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh  *.hxx *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.dox *.py  *.f90 *.f *.for *.vhd *.vhdl"
		       );
	 cl->addValue("*.c");
	 cl->addValue("*.cc");
	 cl->addValue("*.cxx");
	 cl->addValue("*.cpp");
	 cl->addValue("*.c++");
	 cl->addValue("*.d");
	 cl->addValue("*.java");
	 cl->addValue("*.ii");
	 cl->addValue("*.ixx");
	 cl->addValue("*.ipp");
	 cl->addValue("*.i++");
	 cl->addValue("*.inl");
	 cl->addValue("*.h");
	 cl->addValue("*.hh");
	 cl->addValue("*.hxx");
	 cl->addValue("*.hpp");
	 cl->addValue("*.h++");
	 cl->addValue("*.idl");
	 cl->addValue("*.odl");
	 cl->addValue("*.cs");
	 cl->addValue("*.php");
	 cl->addValue("*.php3");
	 cl->addValue("*.inc");
	 cl->addValue("*.m");
	 cl->addValue("*.markdown");
	 cl->addValue("*.md");
	 cl->addValue("*.mm");
	 cl->addValue("*.dox");
	 cl->addValue("*.py");
	 cl->addValue("*.f90");
	 cl->addValue("*.f");
	 cl->addValue("*.for");
	 cl->addValue("*.vhd");
	 cl->addValue("*.vhdl");
	 //----
	 cb = cfg->addBool(
			"RECURSIVE",
			"The RECURSIVE tag can be used to turn specify whether or not subdirectories  should be searched for input files as well. Possible values are YES and NO.  If left blank NO is used.",
			FALSE
		       );
	 //----
	 cl = cfg->addList(
			"EXCLUDE",
			"The EXCLUDE tag can be used to specify files and/or directories that should be  excluded from the INPUT source files. This way you can easily exclude a  subdirectory from a directory tree whose root is specified with the INPUT tag.  Note that relative paths are relative to the directory from which doxygen is  run."
		       );
	 cl->setWidgetType(ConfigList::FileAndDir);
	 //----
	 cb = cfg->addBool(
			"EXCLUDE_SYMLINKS",
			"The EXCLUDE_SYMLINKS tag can be used to select whether or not files or  directories that are symbolic links (a Unix file system feature) are excluded  from the input.",
			FALSE
		       );
	 //----
	 cl = cfg->addList(
			"EXCLUDE_PATTERNS",
			"If the value of the INPUT tag contains directories, you can use the  EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude  certain files from those directories. Note that the wildcards are matched  against the file with absolute path, so to exclude all test directories  for example use the pattern */test/*"
		       );
	 //----
	 cl = cfg->addList(
			"EXCLUDE_SYMBOLS",
			"The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names  (namespaces, classes, functions, etc.) that should be excluded from the  output. The symbol name can be a fully qualified name, a word, or if the  wildcard * is used, a substring. Examples: ANamespace, AClass,  AClass::ANamespace, ANamespace::*Test"
		       );
	 //----
	 cl = cfg->addList(
			"EXAMPLE_PATH",
			"The EXAMPLE_PATH tag can be used to specify one or more files or  directories that contain example code fragments that are included (see  the \\include command)."
		       );
	 cl->setWidgetType(ConfigList::Dir);
	 //----
	 cl = cfg->addList(
			"EXAMPLE_PATTERNS",
			"If the value of the EXAMPLE_PATH tag contains directories, you can use the  EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp  and *.h) to filter out the source-files in the directories. If left  blank all files are included."
		       );
	 cl->addValue("*");
	 //----
	 cb = cfg->addBool(
			"EXAMPLE_RECURSIVE",
			"If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be  searched for input files to be used with the \\include or \\dontinclude  commands irrespective of the value of the RECURSIVE tag.  Possible values are YES and NO. If left blank NO is used.",
			FALSE
		       );
	 //----
	 cl = cfg->addList(
			"IMAGE_PATH",
			"The IMAGE_PATH tag can be used to specify one or more files or  directories that contain image that are included in the documentation (see  the \\image command)."
		       );
	 cl->setWidgetType(ConfigList::Dir);
	 //----
	 cs = cfg->addString(
			"INPUT_FILTER",
			"The INPUT_FILTER tag can be used to specify a program that doxygen should  invoke to filter for each input file. Doxygen will invoke the filter program  by executing (via popen()) the command <filter> <input-file>, where <filter>  is the value of the INPUT_FILTER tag, and <input-file> is the name of an  input file. Doxygen will then use the output that the filter program writes  to standard output.  If FILTER_PATTERNS is specified, this tag will be ignored.  Note that the filter must not add or remove lines; it is applied before the  code is scanned, but not when the output code is generated. If lines are added  or removed, the anchors will not be placed correctly."
		       );
	 cs->setWidgetType(ConfigString::File);
	 //----
	 cl = cfg->addList(
			"FILTER_PATTERNS",
			"The FILTER_PATTERNS tag can be used to specify filters on a per file pattern  basis.  Doxygen will compare the file name with each pattern and apply the  filter if there is a match.  The filters are a list of the form:  pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further  info on how filters are used. If FILTER_PATTERNS is empty or if  non of the patterns match the file name, INPUT_FILTER is applied."
		       );
	 //----
	 cb = cfg->addBool(
			"FILTER_SOURCE_FILES",
			"If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using  INPUT_FILTER) will be used to filter the input files when producing source  files to browse (i.e. when SOURCE_BROWSER is set to YES).",
			FALSE
		       );
	 //----
	 cl = cfg->addList(
			"FILTER_SOURCE_PATTERNS",
			"The FILTER_SOURCE_PATTERNS tag can be used to specify source filters per file  pattern. A pattern will override the setting for FILTER_PATTERN (if any)  and it is also possible to disable source filtering for a specific pattern  using *.ext= (so without naming a filter). This option only has effect when  FILTER_SOURCE_FILES is enabled."
		       );
	 cl->addDependency("FILTER_SOURCE_FILES");
	 //----
	 cs = cfg->addString(
			"USE_MDFILE_AS_MAINPAGE",
			"If the USE_MD_FILE_AS_MAINPAGE tag refers to the name of a markdown file that  is part of the input, its contents will be placed on the main page  (index.html). This can be useful if you have a project on for instance GitHub  and want reuse the introduction page also for the doxygen output."
		       );
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Source Browser","configuration options related to source browsing");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"SOURCE_BROWSER",
			"If the SOURCE_BROWSER tag is set to YES then a list of source files will  be generated. Documented entities will be cross-referenced with these sources.  Note: To get rid of all source code in the generated output, make sure also  VERBATIM_HEADERS is set to NO.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"INLINE_SOURCES",
			"Setting the INLINE_SOURCES tag to YES will include the body  of functions and classes directly in the documentation.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"STRIP_CODE_COMMENTS",
			"Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct  doxygen to hide any special comment blocks from generated source code  fragments. Normal C, C++ and Fortran comments will always remain visible.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"REFERENCED_BY_RELATION",
			"If the REFERENCED_BY_RELATION tag is set to YES  then for each documented function all documented  functions referencing it will be listed.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"REFERENCES_RELATION",
			"If the REFERENCES_RELATION tag is set to YES  then for each documented function all documented entities  called/used by that function will be listed.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"REFERENCES_LINK_SOURCE",
			"If the REFERENCES_LINK_SOURCE tag is set to YES (the default)  and SOURCE_BROWSER tag is set to YES, then the hyperlinks from  functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will  link to the source code.  Otherwise they will link to the documentation.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"SOURCE_TOOLTIPS",
			"If SOURCE_TOOLTIPS is enabled (the default) then hovering a hyperlink in the  source code will show a tooltip with additional information such as prototype,  brief description and links to the definition and documentation. Since this will  make the HTML file larger and loading of large files a bit slower, you can opt  to disable this feature.",
			TRUE
		       );
	 cb->addDependency("SOURCE_BROWSER");
	 //----
	 cb = cfg->addBool(
			"USE_HTAGS",
			"If the USE_HTAGS tag is set to YES then the references to source code  will point to the HTML generated by the htags(1) tool instead of doxygen  built-in source browser. The htags tool is part of GNU's global source  tagging system (see http://www.gnu.org/software/global/global.html). You  will need version 4.8.6 or higher.",
			FALSE
		       );
	 cb->addDependency("SOURCE_BROWSER");
	 //----
	 cb = cfg->addBool(
			"VERBATIM_HEADERS",
			"If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen  will generate a verbatim copy of the header file for each class for  which an include is specified. Set to NO to disable this.",
			TRUE
		       );
#if USE_LIBCLANG
	 //----
	 cb = cfg->addBool(
			"CLANG_ASSISTED_PARSING",
			"If CLANG_ASSISTED_PARSING is set to YES, then doxygen will use the clang parser  for more acurate parsing at the cost of reduced performance. This can be  particularly helpful with template rich C++ code for which doxygen's built-in  parser lacks the necessairy type information.",
			FALSE
		       );
#else
	 cfg->addDisabled("CLANG_ASSISTED_PARSING");
#endif
#if USE_LIBCLANG
	 //----
	 cl = cfg->addList(
			"CLANG_OPTIONS",
			"If clang assisted parsing is enabled you can provide the compiler with command  line options that you would normally use when invoking the compiler. Note that  the include paths will already be set by doxygen for the files and directories  specified at INPUT and INCLUDE_PATH."
		       );
	 cl->addDependency("CLANG_ASSISTED_PARSING");
#else
	 cfg->addDisabled("CLANG_OPTIONS");
#endif
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Index","configuration options related to the alphabetical class index");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"ALPHABETICAL_INDEX",
			"If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index  of all compounds will be generated. Enable this if the project  contains a lot of classes, structs, unions or interfaces.",
			TRUE
		       );
	 //----
	 ci = cfg->addInt(
			"COLS_IN_ALPHA_INDEX",
			"If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then  the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns  in which this list will be split (can be a number in the range [1..20])",
			1,20,5
		       );
	 ci->addDependency("ALPHABETICAL_INDEX");
	 //----
	 cl = cfg->addList(
			"IGNORE_PREFIX",
			"In case all classes in a project start with a common prefix, all  classes will be put under the same header in the alphabetical index.  The IGNORE_PREFIX tag can be used to specify one or more prefixes that  should be ignored while generating the index headers."
		       );
	 cl->addDependency("ALPHABETICAL_INDEX");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("HTML","configuration options related to the HTML output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_HTML",
			"If the GENERATE_HTML tag is set to YES (the default) Doxygen will  generate HTML output.",
			TRUE
		       );
	 //----
	 cs = cfg->addString(
			"HTML_OUTPUT",
			"The HTML_OUTPUT tag is used to specify where the HTML docs will be put.  If a relative path is entered the value of OUTPUT_DIRECTORY will be  put in front of it. If left blank `html' will be used as the default path."
		       );
	 cs->setDefaultValue("html");
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"HTML_FILE_EXTENSION",
			"The HTML_FILE_EXTENSION tag can be used to specify the file extension for  each generated HTML page (for example: .htm,.php,.asp). If it is left blank  doxygen will generate files with .html extension."
		       );
	 cs->setDefaultValue(".html");
	 cs->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"HTML_HEADER",
			"The HTML_HEADER tag can be used to specify a personal HTML header for  each generated HTML page. If it is left blank doxygen will generate a  standard header. Note that when using a custom header you are responsible   for the proper inclusion of any scripts and style sheets that doxygen  needs, which is dependent on the configuration options used.  It is advised to generate a default header using \"doxygen -w html  header.html footer.html stylesheet.css YourConfigFile\" and then modify  that header. Note that the header is subject to change so you typically  have to redo this when upgrading to a newer version of doxygen or when  changing the value of configuration settings such as GENERATE_TREEVIEW!"
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"HTML_FOOTER",
			"The HTML_FOOTER tag can be used to specify a personal HTML footer for  each generated HTML page. If it is left blank doxygen will generate a  standard footer."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"HTML_STYLESHEET",
			"The HTML_STYLESHEET tag can be used to specify a user-defined cascading  style sheet that is used by each HTML page. It can be used to  fine-tune the look of the HTML output. If left blank doxygen will  generate a default style sheet. Note that it is recommended to use  HTML_EXTRA_STYLESHEET instead of this one, as it is more robust and this  tag will in the future become obsolete."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"HTML_EXTRA_STYLESHEET",
			"The HTML_EXTRA_STYLESHEET tag can be used to specify an additional  user-defined cascading style sheet that is included after the standard  style sheets created by doxygen. Using this option one can overrule  certain style aspects. This is preferred over using HTML_STYLESHEET  since it does not replace the standard style sheet and is therefor more  robust against future updates. Doxygen will copy the style sheet file to  the output directory."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_HTML");
	 //----
	 cl = cfg->addList(
			"HTML_EXTRA_FILES",
			"The HTML_EXTRA_FILES tag can be used to specify one or more extra images or  other source files which should be copied to the HTML output directory. Note  that these files will be copied to the base HTML output directory. Use the  $relpath^ marker in the HTML_HEADER and/or HTML_FOOTER files to load these  files. In the HTML_STYLESHEET file, use the file name only. Also note that  the files will be copied as-is; there are no commands or markers available."
		       );
	 cl->addDependency("GENERATE_HTML");
	 cl->setWidgetType(ConfigList::File);
	 //----
	 ci = cfg->addInt(
			"HTML_COLORSTYLE_HUE",
			"The HTML_COLORSTYLE_HUE tag controls the color of the HTML output.  Doxygen will adjust the colors in the style sheet and background images  according to this color. Hue is specified as an angle on a colorwheel,  see http://en.wikipedia.org/wiki/Hue for more information.  For instance the value 0 represents red, 60 is yellow, 120 is green,  180 is cyan, 240 is blue, 300 purple, and 360 is red again.  The allowed range is 0 to 359.",
			0,359,220
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 ci = cfg->addInt(
			"HTML_COLORSTYLE_SAT",
			"The HTML_COLORSTYLE_SAT tag controls the purity (or saturation) of  the colors in the HTML output. For a value of 0 the output will use  grayscales only. A value of 255 will produce the most vivid colors.",
			0,255,100
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 ci = cfg->addInt(
			"HTML_COLORSTYLE_GAMMA",
			"The HTML_COLORSTYLE_GAMMA tag controls the gamma correction applied to  the luminance component of the colors in the HTML output. Values below  100 gradually make the output lighter, whereas values above 100 make  the output darker. The value divided by 100 is the actual gamma applied,  so 80 represents a gamma of 0.8, The value 220 represents a gamma of 2.2,  and 100 does not change the gamma.",
			40,240,80
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"HTML_TIMESTAMP",
			"If the HTML_TIMESTAMP tag is set to YES then the footer of each generated HTML  page will contain the date and time when the page was generated. Setting  this to NO can help when comparing the output of multiple runs.",
			TRUE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"HTML_DYNAMIC_SECTIONS",
			"If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML  documentation will contain sections that can be hidden and shown after the  page has loaded.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 ci = cfg->addInt(
			"HTML_INDEX_NUM_ENTRIES",
			"With HTML_INDEX_NUM_ENTRIES one can control the preferred number of  entries shown in the various tree structured indices initially; the user  can expand and collapse entries dynamically later on. Doxygen will expand  the tree to such a level that at most the specified number of entries are  visible (unless a fully collapsed tree already exceeds this amount).  So setting the number of entries 1 will produce a full collapsed tree by  default. 0 is a special value representing an infinite number of entries  and will result in a full expanded tree by default.",
			0,9999,100
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"GENERATE_DOCSET",
			"If the GENERATE_DOCSET tag is set to YES, additional index files  will be generated that can be used as input for Apple's Xcode 3  integrated development environment, introduced with OSX 10.5 (Leopard).  To create a documentation set, doxygen will generate a Makefile in the  HTML output directory. Running make will produce the docset in that  directory and running \"make install\" will install the docset in  ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find  it at startup.  See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html  for more information.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"DOCSET_FEEDNAME",
			"When GENERATE_DOCSET tag is set to YES, this tag determines the name of the  feed. A documentation feed provides an umbrella under which multiple  documentation sets from a single provider (such as a company or product suite)  can be grouped."
		       );
	 cs->setDefaultValue("Doxygen generated docs");
	 cs->addDependency("GENERATE_DOCSET");
	 //----
	 cs = cfg->addString(
			"DOCSET_BUNDLE_ID",
			"When GENERATE_DOCSET tag is set to YES, this tag specifies a string that  should uniquely identify the documentation set bundle. This should be a  reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen  will append .docset to the name."
		       );
	 cs->setDefaultValue("org.doxygen.Project");
	 cs->addDependency("GENERATE_DOCSET");
	 //----
	 cs = cfg->addString(
			"DOCSET_PUBLISHER_ID",
			"When GENERATE_PUBLISHER_ID tag specifies a string that should uniquely  identify the documentation publisher. This should be a reverse domain-name  style string, e.g. com.mycompany.MyDocSet.documentation."
		       );
	 cs->setDefaultValue("org.doxygen.Publisher");
	 cs->addDependency("GENERATE_DOCSET");
	 //----
	 cs = cfg->addString(
			"DOCSET_PUBLISHER_NAME",
			"The GENERATE_PUBLISHER_NAME tag identifies the documentation publisher."
		       );
	 cs->setDefaultValue("Publisher");
	 cs->addDependency("GENERATE_DOCSET");
	 //----
	 cb = cfg->addBool(
			"GENERATE_HTMLHELP",
			"If the GENERATE_HTMLHELP tag is set to YES, additional index files  will be generated that can be used as input for tools like the  Microsoft HTML help workshop to generate a compiled HTML help file (.chm)  of the generated HTML documentation.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"CHM_FILE",
			"If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can  be used to specify the file name of the resulting .chm file. You  can add a path in front of the file if the result should not be  written to the html output directory."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_HTMLHELP");
	 //----
	 cs = cfg->addString(
			"HHC_LOCATION",
			"If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can  be used to specify the location (absolute path including file name) of  the HTML help compiler (hhc.exe). If non-empty doxygen will try to run  the HTML help compiler on the generated index.hhp."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_HTMLHELP");
	 //----
	 cb = cfg->addBool(
			"GENERATE_CHI",
			"If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag  controls if a separate .chi index file is generated (YES) or that  it should be included in the master .chm file (NO).",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTMLHELP");
	 //----
	 cs = cfg->addString(
			"CHM_INDEX_ENCODING",
			"If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING  is used to encode HtmlHelp index (hhk), content (hhc) and project file  content."
		       );
	 cs->addDependency("GENERATE_HTMLHELP");
	 //----
	 cb = cfg->addBool(
			"BINARY_TOC",
			"If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag  controls whether a binary table of contents is generated (YES) or a  normal table of contents (NO) in the .chm file.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTMLHELP");
	 //----
	 cb = cfg->addBool(
			"TOC_EXPAND",
			"The TOC_EXPAND flag can be set to YES to add extra items for group members  to the contents of the HTML help documentation and to the tree view.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTMLHELP");
	 //----
	 cb = cfg->addBool(
			"GENERATE_QHP",
			"If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and  QHP_VIRTUAL_FOLDER are set, an additional index file will be generated  that can be used as input for Qt's qhelpgenerator to generate a  Qt Compressed Help (.qch) of the generated HTML documentation.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"QCH_FILE",
			"If the QHG_LOCATION tag is specified, the QCH_FILE tag can  be used to specify the file name of the resulting .qch file.  The path specified is relative to the HTML output folder."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cs = cfg->addString(
			"QHP_NAMESPACE",
			"The QHP_NAMESPACE tag specifies the namespace to use when generating  Qt Help Project output. For more information please see  http://doc.trolltech.com/qthelpproject.html#namespace"
		       );
	 cs->setDefaultValue("org.doxygen.Project");
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cs = cfg->addString(
			"QHP_VIRTUAL_FOLDER",
			"The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating  Qt Help Project output. For more information please see  http://doc.trolltech.com/qthelpproject.html#virtual-folders"
		       );
	 cs->setDefaultValue("doc");
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cs = cfg->addString(
			"QHP_CUST_FILTER_NAME",
			"If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to  add. For more information please see  http://doc.trolltech.com/qthelpproject.html#custom-filters"
		       );
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cs = cfg->addString(
			"QHP_CUST_FILTER_ATTRS",
			"The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the  custom filter to add. For more information please see  <a href=\"http://doc.trolltech.com/qthelpproject.html#custom-filters\">  Qt Help Project / Custom Filters</a>."
		       );
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cs = cfg->addString(
			"QHP_SECT_FILTER_ATTRS",
			"The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this  project's  filter section matches.  <a href=\"http://doc.trolltech.com/qthelpproject.html#filter-attributes\">  Qt Help Project / Filter Attributes</a>."
		       );
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cs = cfg->addString(
			"QHG_LOCATION",
			"If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can  be used to specify the location of Qt's qhelpgenerator.  If non-empty doxygen will try to run qhelpgenerator on the generated  .qhp file."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_QHP");
	 //----
	 cb = cfg->addBool(
			"GENERATE_ECLIPSEHELP",
			"If the GENERATE_ECLIPSEHELP tag is set to YES, additional index files   will be generated, which together with the HTML files, form an Eclipse help  plugin. To install this plugin and make it available under the help contents  menu in Eclipse, the contents of the directory containing the HTML and XML  files needs to be copied into the plugins directory of eclipse. The name of  the directory within the plugins directory should be the same as  the ECLIPSE_DOC_ID value. After copying Eclipse needs to be restarted before  the help appears.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cs = cfg->addString(
			"ECLIPSE_DOC_ID",
			"A unique identifier for the eclipse help plugin. When installing the plugin  the directory name containing the HTML and XML files should also have  this name."
		       );
	 cs->setDefaultValue("org.doxygen.Project");
	 cs->addDependency("GENERATE_ECLIPSEHELP");
	 //----
	 cb = cfg->addBool(
			"DISABLE_INDEX",
			"The DISABLE_INDEX tag can be used to turn on/off the condensed index (tabs)  at top of each HTML page. The value NO (the default) enables the index and  the value YES disables it. Since the tabs have the same information as the  navigation tree you can set this option to NO if you already set  GENERATE_TREEVIEW to YES.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"GENERATE_TREEVIEW",
			"The GENERATE_TREEVIEW tag is used to specify whether a tree-like index  structure should be generated to display hierarchical information.  If the tag value is set to YES, a side panel will be generated  containing a tree-like index structure (just like the one that  is generated for HTML Help). For this to work a browser that supports  JavaScript, DHTML, CSS and frames is required (i.e. any modern browser).  Windows users are probably better off using the HTML help feature.  Since the tree basically has the same information as the tab index you  could consider to set DISABLE_INDEX to NO when enabling this option.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 ci = cfg->addInt(
			"ENUM_VALUES_PER_LINE",
			"The ENUM_VALUES_PER_LINE tag can be used to set the number of enum values  (range [0,1..20]) that doxygen will group on one line in the generated HTML  documentation. Note that a value of 0 will completely suppress the enum  values from appearing in the overview section.",
			0,20,4
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 ci = cfg->addInt(
			"TREEVIEW_WIDTH",
			"If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be  used to set the initial width (in pixels) of the frame in which the tree  is shown.",
			0,1500,250
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"EXT_LINKS_IN_WINDOW",
			"When the EXT_LINKS_IN_WINDOW option is set to YES doxygen will open  links to external symbols imported via tag files in a separate window.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 ci = cfg->addInt(
			"FORMULA_FONTSIZE",
			"Use this tag to change the font size of Latex formulas included  as images in the HTML documentation. The default is 10. Note that  when you change the font size after a successful doxygen run you need  to manually remove any form_*.png images from the HTML output directory  to force them to be regenerated.",
			8,50,10
		       );
	 ci->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"FORMULA_TRANSPARENT",
			"Use the FORMULA_TRANPARENT tag to determine whether or not the images  generated for formulas are transparent PNGs. Transparent PNGs are  not supported properly for IE 6.0, but are supported on all modern browsers.  Note that when changing this option you need to delete any form_*.png files  in the HTML output before the changes have effect.",
			TRUE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"USE_MATHJAX",
			"Enable the USE_MATHJAX option to render LaTeX formulas using MathJax  (see http://www.mathjax.org) which uses client side Javascript for the  rendering instead of using prerendered bitmaps. Use this if you do not  have LaTeX installed or if you want to formulas look prettier in the HTML  output. When enabled you may also need to install MathJax separately and  configure the path to it using the MATHJAX_RELPATH option.",
			FALSE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 ce = cfg->addEnum(
			"MATHJAX_FORMAT",
			"When MathJax is enabled you can set the default output format to be used for  the MathJax output. Supported types are HTML-CSS, NativeMML (i.e. MathML) and  SVG. The default value is HTML-CSS, which is slower, but has the best  compatibility.",
			"HTML-CSS"
		       );
	 ce->addValue("HTML-CSS");
	 ce->addValue("NativeMML");
	 ce->addValue("SVG");
	 ce->addDependency("USE_MATHJAX");
	 //----
	 cs = cfg->addString(
			"MATHJAX_RELPATH",
			"When MathJax is enabled you need to specify the location relative to the  HTML output directory using the MATHJAX_RELPATH option. The destination  directory should contain the MathJax.js script. For instance, if the mathjax  directory is located at the same level as the HTML output directory, then  MATHJAX_RELPATH should be ../mathjax. The default value points to  the MathJax Content Delivery Network so you can quickly see the result without  installing MathJax.  However, it is strongly recommended to install a local  copy of MathJax from http://www.mathjax.org before deployment."
		       );
	 cs->setDefaultValue("http://cdn.mathjax.org/mathjax/latest");
	 cs->addDependency("USE_MATHJAX");
	 //----
	 cl = cfg->addList(
			"MATHJAX_EXTENSIONS",
			"The MATHJAX_EXTENSIONS tag can be used to specify one or MathJax extension  names that should be enabled during MathJax rendering."
		       );
	 cl->addDependency("USE_MATHJAX");
	 //----
	 cs = cfg->addString(
			"MATHJAX_CODEFILE",
			"The MATHJAX_CODEFILE tag can be used to specify a file with javascript  pieces of code that will be used on startup of the MathJax code."
		       );
	 cs->addDependency("USE_MATHJAX");
	 //----
	 cb = cfg->addBool(
			"SEARCHENGINE",
			"When the SEARCHENGINE tag is enabled doxygen will generate a search box  for the HTML output. The underlying search engine uses javascript  and DHTML and should work on any modern browser. Note that when using  HTML help (GENERATE_HTMLHELP), Qt help (GENERATE_QHP), or docsets  (GENERATE_DOCSET) there is already a search function so this one should  typically be disabled. For large projects the javascript based search engine  can be slow, then enabling SERVER_BASED_SEARCH may provide a better solution.",
			TRUE
		       );
	 cb->addDependency("GENERATE_HTML");
	 //----
	 cb = cfg->addBool(
			"SERVER_BASED_SEARCH",
			"When the SERVER_BASED_SEARCH tag is enabled the search engine will be  implemented using a web server instead of a web client using Javascript.  There are two flavours of web server based search depending on the  EXTERNAL_SEARCH setting. When disabled, doxygen will generate a PHP script for  searching and an index file used by the script. When EXTERNAL_SEARCH is  enabled the indexing and searching needs to be provided by external tools.  See the manual for details.",
			FALSE
		       );
	 cb->addDependency("SEARCHENGINE");
	 //----
	 cb = cfg->addBool(
			"EXTERNAL_SEARCH",
			"When EXTERNAL_SEARCH is enabled doxygen will no longer generate the PHP  script for searching. Instead the search results are written to an XML file  which needs to be processed by an external indexer. Doxygen will invoke an  external search engine pointed to by the SEARCHENGINE_URL option to obtain  the search results. Doxygen ships with an example indexer (doxyindexer) and  search engine (doxysearch.cgi) which are based on the open source search  engine library Xapian. See the manual for configuration details.",
			FALSE
		       );
	 cb->addDependency("SEARCHENGINE");
	 //----
	 cs = cfg->addString(
			"SEARCHENGINE_URL",
			"The SEARCHENGINE_URL should point to a search engine hosted by a web server  which will returned the search results when EXTERNAL_SEARCH is enabled.  Doxygen ships with an example search engine (doxysearch) which is based on  the open source search engine library Xapian. See the manual for configuration  details."
		       );
	 cs->addDependency("SEARCHENGINE");
	 //----
	 cs = cfg->addString(
			"SEARCHDATA_FILE",
			"When SERVER_BASED_SEARCH and EXTERNAL_SEARCH are both enabled the unindexed  search data is written to a file for indexing by an external tool. With the  SEARCHDATA_FILE tag the name of this file can be specified."
		       );
	 cs->setDefaultValue("searchdata.xml");
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("SEARCHENGINE");
	 //----
	 cs = cfg->addString(
			"EXTERNAL_SEARCH_ID",
			"When SERVER_BASED_SEARCH AND EXTERNAL_SEARCH are both enabled the  EXTERNAL_SEARCH_ID tag can be used as an identifier for the project. This is  useful in combination with EXTRA_SEARCH_MAPPINGS to search through multiple  projects and redirect the results back to the right project."
		       );
	 cs->addDependency("SEARCHENGINE");
	 //----
	 cl = cfg->addList(
			"EXTRA_SEARCH_MAPPINGS",
			"The EXTRA_SEARCH_MAPPINGS tag can be used to enable searching through doxygen  projects other than the one defined by this configuration file, but that are  all added to the same external search index. Each project needs to have a  unique id set via EXTERNAL_SEARCH_ID. The search mapping then maps the id  of to a relative location where the documentation can be found.  The format is: EXTRA_SEARCH_MAPPINGS = id1=loc1 id2=loc2 ..."
		       );
	 cl->addDependency("SEARCHENGINE");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("LaTeX","configuration options related to the LaTeX output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_LATEX",
			"If the GENERATE_LATEX tag is set to YES (the default) Doxygen will  generate Latex output.",
			TRUE
		       );
	 //----
	 cs = cfg->addString(
			"LATEX_OUTPUT",
			"The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put.  If a relative path is entered the value of OUTPUT_DIRECTORY will be  put in front of it. If left blank `latex' will be used as the default path."
		       );
	 cs->setDefaultValue("latex");
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("GENERATE_LATEX");
	 //----
	 cs = cfg->addString(
			"LATEX_CMD_NAME",
			"The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be  invoked. If left blank `latex' will be used as the default command name.  Note that when enabling USE_PDFLATEX this option is only used for  generating bitmaps for formulas in the HTML output, but not in the  Makefile that is written to the output directory."
		       );
	 cs->setDefaultValue("latex");
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_LATEX");
	 //----
	 cs = cfg->addString(
			"MAKEINDEX_CMD_NAME",
			"The MAKEINDEX_CMD_NAME tag can be used to specify the command name to  generate index for LaTeX. If left blank `makeindex' will be used as the  default command name."
		       );
	 cs->setDefaultValue("makeindex");
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_LATEX");
	 //----
	 cb = cfg->addBool(
			"COMPACT_LATEX",
			"If the COMPACT_LATEX tag is set to YES Doxygen generates more compact  LaTeX documents. This may be useful for small projects and may help to  save some trees in general.",
			FALSE
		       );
	 cb->addDependency("GENERATE_LATEX");
	 //----
	 ce = cfg->addEnum(
			"PAPER_TYPE",
			"The PAPER_TYPE tag can be used to set the paper type that is used  by the printer. Possible values are: a4, letter, legal and  executive. If left blank a4 will be used.",
			"a4"
		       );
	 ce->addValue("a4");
	 ce->addValue("letter");
	 ce->addValue("legal");
	 ce->addValue("executive");
	 ce->addDependency("GENERATE_LATEX");
	 //----
	 cl = cfg->addList(
			"EXTRA_PACKAGES",
			"The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX  packages that should be included in the LaTeX output."
		       );
	 cl->addDependency("GENERATE_LATEX");
	 //----
	 cs = cfg->addString(
			"LATEX_HEADER",
			"The LATEX_HEADER tag can be used to specify a personal LaTeX header for  the generated latex document. The header should contain everything until  the first chapter. If it is left blank doxygen will generate a  standard header. Notice: only use this tag if you know what you are doing!"
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_LATEX");
	 //----
	 cs = cfg->addString(
			"LATEX_FOOTER",
			"The LATEX_FOOTER tag can be used to specify a personal LaTeX footer for  the generated latex document. The footer should contain everything after  the last chapter. If it is left blank doxygen will generate a  standard footer. Notice: only use this tag if you know what you are doing!"
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_LATEX");
	 //----
	 cl = cfg->addList(
			"LATEX_EXTRA_FILES",
			"The LATEX_EXTRA_FILES tag can be used to specify one or more extra images  or other source files which should be copied to the LaTeX output directory.  Note that the files will be copied as-is; there are no commands or markers  available."
		       );
	 cl->addDependency("GENERATE_LATEX");
	 cl->setWidgetType(ConfigList::File);
	 //----
	 cb = cfg->addBool(
			"PDF_HYPERLINKS",
			"If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated  is prepared for conversion to pdf (using ps2pdf). The pdf file will  contain links (just like the HTML output) instead of page references  This makes the output suitable for online browsing using a pdf viewer.",
			TRUE
		       );
	 cb->addDependency("GENERATE_LATEX");
	 //----
	 cb = cfg->addBool(
			"USE_PDFLATEX",
			"If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of  plain latex in the generated Makefile. Set this option to YES to get a  higher quality PDF documentation.",
			TRUE
		       );
	 cb->addDependency("GENERATE_LATEX");
	 //----
	 cb = cfg->addBool(
			"LATEX_BATCHMODE",
			"If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\\\batchmode.  command to the generated LaTeX files. This will instruct LaTeX to keep  running if errors occur, instead of asking the user for help.  This option is also used when generating formulas in HTML.",
			FALSE
		       );
	 cb->addDependency("GENERATE_LATEX");
	 //----
	 cb = cfg->addBool(
			"LATEX_HIDE_INDICES",
			"If LATEX_HIDE_INDICES is set to YES then doxygen will not  include the index chapters (such as File Index, Compound Index, etc.)  in the output.",
			FALSE
		       );
	 cb->addDependency("GENERATE_LATEX");
	 //----
	 cb = cfg->addBool(
			"LATEX_SOURCE_CODE",
			"If LATEX_SOURCE_CODE is set to YES then doxygen will include  source code with syntax highlighting in the LaTeX output.  Note that which sources are shown also depends on other settings  such as SOURCE_BROWSER.",
			FALSE
		       );
	 cb->addDependency("GENERATE_LATEX");
	 //----
	 cs = cfg->addString(
			"LATEX_BIB_STYLE",
			"The LATEX_BIB_STYLE tag can be used to specify the style to use for the  bibliography, e.g. plainnat, or ieeetr. The default style is \"plain\". See  http://en.wikipedia.org/wiki/BibTeX for more info."
		       );
	 cs->setDefaultValue("plain");
	 cs->addDependency("GENERATE_LATEX");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("RTF","configuration options related to the RTF output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_RTF",
			"If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output  The RTF output is optimized for Word 97 and may not look very pretty with  other RTF readers or editors.",
			FALSE
		       );
	 //----
	 cs = cfg->addString(
			"RTF_OUTPUT",
			"The RTF_OUTPUT tag is used to specify where the RTF docs will be put.  If a relative path is entered the value of OUTPUT_DIRECTORY will be  put in front of it. If left blank `rtf' will be used as the default path."
		       );
	 cs->setDefaultValue("rtf");
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("GENERATE_RTF");
	 //----
	 cb = cfg->addBool(
			"COMPACT_RTF",
			"If the COMPACT_RTF tag is set to YES Doxygen generates more compact  RTF documents. This may be useful for small projects and may help to  save some trees in general.",
			FALSE
		       );
	 cb->addDependency("GENERATE_RTF");
	 //----
	 cb = cfg->addBool(
			"RTF_HYPERLINKS",
			"If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated  will contain hyperlink fields. The RTF file will  contain links (just like the HTML output) instead of page references.  This makes the output suitable for online browsing using WORD or other  programs which support those fields.  Note: wordpad (write) and others do not support links.",
			FALSE
		       );
	 cb->addDependency("GENERATE_RTF");
	 //----
	 cs = cfg->addString(
			"RTF_STYLESHEET_FILE",
			"Load style sheet definitions from file. Syntax is similar to doxygen's  config file, i.e. a series of assignments. You only have to provide  replacements, missing definitions are set to their default value."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_RTF");
	 //----
	 cs = cfg->addString(
			"RTF_EXTENSIONS_FILE",
			"Set optional variables used in the generation of an rtf document.  Syntax is similar to doxygen's config file."
		       );
	 cs->setWidgetType(ConfigString::File);
	 cs->addDependency("GENERATE_RTF");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Man","configuration options related to the man page output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_MAN",
			"If the GENERATE_MAN tag is set to YES (the default) Doxygen will  generate man pages",
			FALSE
		       );
	 //----
	 cs = cfg->addString(
			"MAN_OUTPUT",
			"The MAN_OUTPUT tag is used to specify where the man pages will be put.  If a relative path is entered the value of OUTPUT_DIRECTORY will be  put in front of it. If left blank `man' will be used as the default path."
		       );
	 cs->setDefaultValue("man");
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("GENERATE_MAN");
	 //----
	 cs = cfg->addString(
			"MAN_EXTENSION",
			"The MAN_EXTENSION tag determines the extension that is added to  the generated man pages (default is the subroutine's section .3)"
		       );
	 cs->setDefaultValue(".3");
	 cs->addDependency("GENERATE_MAN");
	 //----
	 cb = cfg->addBool(
			"MAN_LINKS",
			"If the MAN_LINKS tag is set to YES and Doxygen generates man output,  then it will generate one additional man file for each entity  documented in the real man page(s). These additional files  only source the real man page, but without them the man command  would be unable to find the correct page. The default is NO.",
			FALSE
		       );
	 cb->addDependency("GENERATE_MAN");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("XML","configuration options related to the XML output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_XML",
			"If the GENERATE_XML tag is set to YES Doxygen will  generate an XML file that captures the structure of  the code including all documentation.",
			FALSE
		       );
	 //----
	 cs = cfg->addString(
			"XML_OUTPUT",
			"The XML_OUTPUT tag is used to specify where the XML pages will be put.  If a relative path is entered the value of OUTPUT_DIRECTORY will be  put in front of it. If left blank `xml' will be used as the default path."
		       );
	 cs->setDefaultValue("xml");
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("GENERATE_XML");
	 //----
	 cs = cfg->addString(
			"XML_SCHEMA",
			"The XML_SCHEMA tag can be used to specify an XML schema,  which can be used by a validating XML parser to check the  syntax of the XML files."
		       );
	 cs->addDependency("GENERATE_XML");
	 //----
	 cs = cfg->addString(
			"XML_DTD",
			"The XML_DTD tag can be used to specify an XML DTD,  which can be used by a validating XML parser to check the  syntax of the XML files."
		       );
	 cs->addDependency("GENERATE_XML");
	 //----
	 cb = cfg->addBool(
			"XML_PROGRAMLISTING",
			"If the XML_PROGRAMLISTING tag is set to YES Doxygen will  dump the program listings (including syntax highlighting  and cross-referencing information) to the XML output. Note that  enabling this will significantly increase the size of the XML output.",
			TRUE
		       );
	 cb->addDependency("GENERATE_XML");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Docbook","configuration options related to the DOCBOOK output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_DOCBOOK",
			"If the GENERATE_DOCBOOK tag is set to YES Doxygen will generate DOCBOOK files  that can be used to generate PDF.",
			FALSE
		       );
	 //----
	 cs = cfg->addString(
			"DOCBOOK_OUTPUT",
			"The DOCBOOK_OUTPUT tag is used to specify where the DOCBOOK pages will be put.  If a relative path is entered the value of OUTPUT_DIRECTORY will be put in  front of it. If left blank docbook will be used as the default path."
		       );
	 cs->setDefaultValue("docbook");
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("GENERATE_DOCBOOK");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("DEF","configuration options for the AutoGen Definitions output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_AUTOGEN_DEF",
			"If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will  generate an AutoGen Definitions (see autogen.sf.net) file  that captures the structure of the code including all  documentation. Note that this feature is still experimental  and incomplete at the moment.",
			FALSE
		       );
	 //---------------------------------------------------------------------------
	 cfg->addInfo("PerlMod","configuration options related to the Perl module output");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"GENERATE_PERLMOD",
			"If the GENERATE_PERLMOD tag is set to YES Doxygen will  generate a Perl module file that captures the structure of  the code including all documentation. Note that this  feature is still experimental and incomplete at the  moment.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"PERLMOD_LATEX",
			"If the PERLMOD_LATEX tag is set to YES Doxygen will generate  the necessary Makefile rules, Perl scripts and LaTeX code to be able  to generate PDF and DVI output from the Perl module output.",
			FALSE
		       );
	 cb->addDependency("GENERATE_PERLMOD");
	 //----
	 cb = cfg->addBool(
			"PERLMOD_PRETTY",
			"If the PERLMOD_PRETTY tag is set to YES the Perl module output will be  nicely formatted so it can be parsed by a human reader.  This is useful  if you want to understand what is going on.  On the other hand, if this  tag is set to NO the size of the Perl module output will be much smaller  and Perl will parse it just the same.",
			TRUE
		       );
	 cb->addDependency("GENERATE_PERLMOD");
	 //----
	 cs = cfg->addString(
			"PERLMOD_MAKEVAR_PREFIX",
			"The names of the make variables in the generated doxyrules.make file  are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX.  This is useful so different doxyrules.make files included by the same  Makefile don't overwrite each other's variables."
		       );
	 cs->addDependency("GENERATE_PERLMOD");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Preprocessor","Configuration options related to the preprocessor");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"ENABLE_PREPROCESSING",
			"If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will  evaluate all C-preprocessor directives found in the sources and include  files.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"MACRO_EXPANSION",
			"If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro  names in the source code. If set to NO (the default) only conditional  compilation will be performed. Macro expansion can be done in a controlled  way by setting EXPAND_ONLY_PREDEF to YES.",
			FALSE
		       );
	 cb->addDependency("ENABLE_PREPROCESSING");
	 //----
	 cb = cfg->addBool(
			"EXPAND_ONLY_PREDEF",
			"If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES  then the macro expansion is limited to the macros specified with the  PREDEFINED and EXPAND_AS_DEFINED tags.",
			FALSE
		       );
	 cb->addDependency("ENABLE_PREPROCESSING");
	 //----
	 cb = cfg->addBool(
			"SEARCH_INCLUDES",
			"If the SEARCH_INCLUDES tag is set to YES (the default) the includes files  pointed to by INCLUDE_PATH will be searched when a #include is found.",
			TRUE
		       );
	 cb->addDependency("ENABLE_PREPROCESSING");
	 //----
	 cl = cfg->addList(
			"INCLUDE_PATH",
			"The INCLUDE_PATH tag can be used to specify one or more directories that  contain include files that are not input files but should be processed by  the preprocessor."
		       );
	 cl->addDependency("SEARCH_INCLUDES");
	 cl->setWidgetType(ConfigList::Dir);
	 //----
	 cl = cfg->addList(
			"INCLUDE_FILE_PATTERNS",
			"You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard  patterns (like *.h and *.hpp) to filter out the header-files in the  directories. If left blank, the patterns specified with FILE_PATTERNS will  be used."
		       );
	 cl->addDependency("ENABLE_PREPROCESSING");
	 //----
	 cl = cfg->addList(
			"PREDEFINED",
			"The PREDEFINED tag can be used to specify one or more macro names that  are defined before the preprocessor is started (similar to the -D option of  gcc). The argument of the tag is a list of macros of the form: name  or name=definition (no spaces). If the definition and the = are  omitted =1 is assumed. To prevent a macro definition from being  undefined via #undef or recursively expanded use the := operator  instead of the = operator."
		       );
	 cl->addDependency("ENABLE_PREPROCESSING");
	 //----
	 cl = cfg->addList(
			"EXPAND_AS_DEFINED",
			"If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then  this tag can be used to specify a list of macro names that should be expanded.  The macro definition that is found in the sources will be used.  Use the PREDEFINED tag if you want to use a different macro definition that  overrules the definition found in the source code."
		       );
	 cl->addDependency("ENABLE_PREPROCESSING");
	 //----
	 cb = cfg->addBool(
			"SKIP_FUNCTION_MACROS",
			"If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then  doxygen's preprocessor will remove all references to function-like macros  that are alone on a line, have an all uppercase name, and do not end with a  semicolon, because these will confuse the parser if not removed.",
			TRUE
		       );
	 cb->addDependency("ENABLE_PREPROCESSING");
	 //---------------------------------------------------------------------------
	 cfg->addInfo("External","Configuration::additions related to external references");
	 //---------------------------------------------------------------------------

	 //----
	 cl = cfg->addList(
			"TAGFILES",
			"The TAGFILES option can be used to specify one or more tagfiles. For each  tag file the location of the external documentation should be added. The  format of a tag file without this location is as follows:    TAGFILES = file1 file2 ...  Adding location for the tag files is done as follows:    TAGFILES = file1=loc1 \"file2 = loc2\" ...  where \"loc1\" and \"loc2\" can be relative or absolute paths  or URLs. Note that each tag file must have a unique name (where the name does  NOT include the path). If a tag file is not located in the directory in which  doxygen is run, you must also specify the path to the tagfile here."
		       );
	 cl->setWidgetType(ConfigList::File);
	 //----
	 cs = cfg->addString(
			"GENERATE_TAGFILE",
			"When a file name is specified after GENERATE_TAGFILE, doxygen will create  a tag file that is based on the input files it reads."
		       );
	 cs->setWidgetType(ConfigString::File);
	 //----
	 cb = cfg->addBool(
			"ALLEXTERNALS",
			"If the ALLEXTERNALS tag is set to YES all external classes will be listed  in the class index. If set to NO only the inherited external classes  will be listed.",
			FALSE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTERNAL_GROUPS",
			"If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed  in the modules index. If set to NO, only the current project's groups will  be listed.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"EXTERNAL_PAGES",
			"If the EXTERNAL_PAGES tag is set to YES all external pages will be listed  in the related pages index. If set to NO, only the current project's  pages will be listed.",
			TRUE
		       );
	 //----
	 cs = cfg->addString(
			"PERL_PATH",
			"The PERL_PATH should be the absolute path and name of the perl script  interpreter (i.e. the result of `which perl')."
		       );
	 cs->setDefaultValue("/usr/bin/perl");
	 cs->setWidgetType(ConfigString::Dir);
	 //---------------------------------------------------------------------------
	 cfg->addInfo("Dot","Configuration options related to the dot tool");
	 //---------------------------------------------------------------------------

	 //----
	 cb = cfg->addBool(
			"CLASS_DIAGRAMS",
			"If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will  generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base  or super classes. Setting the tag to NO turns the diagrams off. Note that  this option also works with HAVE_DOT disabled, but it is recommended to  install and use dot, since it yields more powerful graphs.",
			TRUE
		       );
	 //----
	 cs = cfg->addString(
			"MSCGEN_PATH",
			"You can define message sequence charts within doxygen comments using the \\msc  command. Doxygen will then run the mscgen tool (see  http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the  documentation. The MSCGEN_PATH tag allows you to specify the directory where  the mscgen tool resides. If left empty the tool is assumed to be found in the  default search path."
		       );
	 //----
	 cb = cfg->addBool(
			"HIDE_UNDOC_RELATIONS",
			"If set to YES, the inheritance and collaboration graphs will hide  inheritance and usage relations if the target is undocumented  or is not a class.",
			TRUE
		       );
	 //----
	 cb = cfg->addBool(
			"HAVE_DOT",
			"If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is  available from the path. This tool is part of Graphviz, a graph visualization  toolkit from AT&T and Lucent Bell Labs. The other options in this section  have no effect if this option is set to NO (the default)",
			FALSE
		       );
	 //----
	 ci = cfg->addInt(
			"DOT_NUM_THREADS",
			"The DOT_NUM_THREADS specifies the number of dot invocations doxygen is  allowed to run in parallel. When set to 0 (the default) doxygen will  base this on the number of processors available in the system. You can set it  explicitly to a value larger than 0 to get control over the balance  between CPU load and processing speed.",
			0,32,0
		       );
	 ci->addDependency("HAVE_DOT");
	 //----
	 cs = cfg->addString(
			"DOT_FONTNAME",
			"By default doxygen will use the Helvetica font for all dot files that  doxygen generates. When you want a differently looking font you can specify  the font name using DOT_FONTNAME. You need to make sure dot is able to find  the font, which can be done by putting it in a standard location or by setting  the DOTFONTPATH environment variable or by setting DOT_FONTPATH to the  directory containing the font."
		       );
	 cs->setDefaultValue("Helvetica");
	 cs->addDependency("HAVE_DOT");
	 //----
	 ci = cfg->addInt(
			"DOT_FONTSIZE",
			"The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs.  The default size is 10pt.",
			4,24,10
		       );
	 ci->addDependency("HAVE_DOT");
	 //----
	 cs = cfg->addString(
			"DOT_FONTPATH",
			"By default doxygen will tell dot to use the Helvetica font.  If you specify a different font using DOT_FONTNAME you can use DOT_FONTPATH to  set the path where dot can find it."
		       );
	 cs->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"CLASS_GRAPH",
			"If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen  will generate a graph for each documented class showing the direct and  indirect inheritance relations. Setting this tag to YES will force the  CLASS_DIAGRAMS tag to NO.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"COLLABORATION_GRAPH",
			"If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen  will generate a graph for each documented class showing the direct and  indirect implementation dependencies (inheritance, containment, and  class references variables) of the class with other documented classes.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"GROUP_GRAPHS",
			"If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen  will generate a graph for groups, showing the direct groups dependencies",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"UML_LOOK",
			"If the UML_LOOK tag is set to YES doxygen will generate inheritance and  collaboration diagrams in a style similar to the OMG's Unified Modeling  Language.",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 ci = cfg->addInt(
			"UML_LIMIT_NUM_FIELDS",
			"If the UML_LOOK tag is enabled, the fields and methods are shown inside  the class node. If there are many fields or methods and many nodes the  graph may become too big to be useful. The UML_LIMIT_NUM_FIELDS  threshold limits the number of items for each type to make the size more  manageable. Set this to 0 for no limit. Note that the threshold may be  exceeded by 50% before the limit is enforced.",
			0,100,10
		       );
	 ci->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"TEMPLATE_RELATIONS",
			"If set to YES, the inheritance and collaboration graphs will show the  relations between templates and their instances.",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"INCLUDE_GRAPH",
			"If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT  tags are set to YES then doxygen will generate a graph for each documented  file showing the direct and indirect include dependencies of the file with  other documented files.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"INCLUDED_BY_GRAPH",
			"If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and  HAVE_DOT tags are set to YES then doxygen will generate a graph for each  documented header file showing the documented files that directly or  indirectly include this file.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"CALL_GRAPH",
			"If the CALL_GRAPH and HAVE_DOT options are set to YES then  doxygen will generate a call dependency graph for every global function  or class method. Note that enabling this option will significantly increase  the time of a run. So in most cases it will be better to enable call graphs  for selected functions only using the \\callgraph command.",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"CALLER_GRAPH",
			"If the CALLER_GRAPH and HAVE_DOT tags are set to YES then  doxygen will generate a caller dependency graph for every global function  or class method. Note that enabling this option will significantly increase  the time of a run. So in most cases it will be better to enable caller  graphs for selected functions only using the \\callergraph command.",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"GRAPHICAL_HIERARCHY",
			"If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen  will generate a graphical hierarchy of all classes instead of a textual one.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"DIRECTORY_GRAPH",
			"If the DIRECTORY_GRAPH and HAVE_DOT tags are set to YES  then doxygen will show the dependencies a directory has on other directories  in a graphical way. The dependency relations are determined by the #include  relations between the files in the directories.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 ce = cfg->addEnum(
			"DOT_IMAGE_FORMAT",
			"The DOT_IMAGE_FORMAT tag can be used to set the image format of the images  generated by dot. Possible values are svg, png, jpg, or gif.  If left blank png will be used. If you choose svg you need to set  HTML_FILE_EXTENSION to xhtml in order to make the SVG files  visible in IE 9+ (other browsers do not have this requirement).",
			"png"
		       );
	 ce->addValue("png");
	 ce->addValue("jpg");
	 ce->addValue("gif");
	 ce->addValue("svg");
	 ce->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"INTERACTIVE_SVG",
			"If DOT_IMAGE_FORMAT is set to svg, then this option can be set to YES to  enable generation of interactive SVG images that allow zooming and panning.  Note that this requires a modern browser other than Internet Explorer.  Tested and working are Firefox, Chrome, Safari, and Opera. For IE 9+ you  need to set HTML_FILE_EXTENSION to xhtml in order to make the SVG files  visible. Older versions of IE do not have SVG support.",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cs = cfg->addString(
			"DOT_PATH",
			"The tag DOT_PATH can be used to specify the path where the dot tool can be  found. If left blank, it is assumed the dot tool can be found in the path."
		       );
	 cs->setWidgetType(ConfigString::Dir);
	 cs->addDependency("HAVE_DOT");
	 //----
	 cl = cfg->addList(
			"DOTFILE_DIRS",
			"The DOTFILE_DIRS tag can be used to specify one or more directories that  contain dot files that are included in the documentation (see the  \\dotfile command)."
		       );
	 cl->addDependency("HAVE_DOT");
	 cl->setWidgetType(ConfigList::Dir);
	 //----
	 cl = cfg->addList(
			"MSCFILE_DIRS",
			"The MSCFILE_DIRS tag can be used to specify one or more directories that  contain msc files that are included in the documentation (see the  \\mscfile command)."
		       );
	 cl->setWidgetType(ConfigList::Dir);
	 //----
	 ci = cfg->addInt(
			"DOT_GRAPH_MAX_NODES",
			"The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of  nodes that will be shown in the graph. If the number of nodes in a graph  becomes larger than this value, doxygen will truncate the graph, which is  visualized by representing a node as a red box. Note that doxygen if the  number of direct children of the root node in a graph is already larger than  DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note  that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH.",
			0,10000,50
		       );
	 ci->addDependency("HAVE_DOT");
	 //----
	 ci = cfg->addInt(
			"MAX_DOT_GRAPH_DEPTH",
			"The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the  graphs generated by dot. A depth value of 3 means that only nodes reachable  from the root by following a path via at most 3 edges will be shown. Nodes  that lay further from the root node will be omitted. Note that setting this  option to 1 or 2 may greatly reduce the computation time needed for large  code bases. Also note that the size of a graph can be further restricted by  DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction.",
			0,1000,0
		       );
	 ci->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"DOT_TRANSPARENT",
			"Set the DOT_TRANSPARENT tag to YES to generate images with a transparent  background. This is disabled by default, because dot on Windows does not  seem to support this out of the box. Warning: Depending on the platform used,  enabling this option may lead to badly anti-aliased labels on the edges of  a graph (i.e. they become hard to read).",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"DOT_MULTI_TARGETS",
			"Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output  files in one run (i.e. multiple -o and -T options on the command line). This  makes dot run faster, but since only newer versions of dot (>1.8.10)  support this, this feature is disabled by default.",
			FALSE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"GENERATE_LEGEND",
			"If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will  generate a legend page explaining the meaning of the various boxes and  arrows in the dot generated graphs.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cb = cfg->addBool(
			"DOT_CLEANUP",
			"If the DOT_CLEANUP tag is set to YES (the default) Doxygen will  remove the intermediate dot files that are used to generate  the various graphs.",
			TRUE
		       );
	 cb->addDependency("HAVE_DOT");
	 //----
	 cfg->addObsolete("USE_WINDOWS_ENCODING");
	 //----
	 cfg->addObsolete("DETAILS_AT_TOP");
	 //----
	 cfg->addObsolete("QTHELP_FILE");
	 //----
	 cfg->addObsolete("QTHELP_CONFIG");
	 //----
	 cfg->addObsolete("DOXYGEN2QTHELP_LOC");
	 //----
	 cfg->addObsolete("MAX_DOT_GRAPH_WIDTH");
	 //----
	 cfg->addObsolete("MAX_DOT_GRAPH_HEIGHT");
	 //----
	 cfg->addObsolete("CGI_NAME");
	 //----
	 cfg->addObsolete("CGI_URL");
	 //----
	 cfg->addObsolete("DOC_URL");
	 //----
	 cfg->addObsolete("DOC_ABSPATH");
	 //----
	 cfg->addObsolete("BIN_ABSPATH");
	 //----
	 cfg->addObsolete("EXT_DOC_PATHS");
	 //----
	 cfg->addObsolete("USE_INLINE_TREES");
	 //----
	 cfg->addObsolete("SHOW_DIRECTORIES");
	 //----
	 cfg->addObsolete("HTML_ALIGN_MEMBERS");
	 //----
	 cfg->addObsolete("SYMBOL_CACHE_SIZE");
}