Merge branch '4.7' of scm.dev.nokia.troll.no:qt/qt-qml into 4.7-integration

* '4.7' of scm.dev.nokia.troll.no:qt/qt-qml:
  QmlViewer: Remove trailing whitespace
  QmlViewer: Remove trailing whitespace
  QmlViewer: Fix crash on exit
  PathView: removing the currentIndex could make it invalid.
  Fix broken database creation caused by previous fix
  Improvements to anchoring docs
  QDeclarativeProperty doc improvements
  Update QtGui bwins def file for QTBUG-15615
  highlightFollowsCurrentItem: false was not always honored
  ListView: Fix calculation of currentItem position when out of view.
  Update QtGui def files
  Fix openDatabaseSync() to not create unused directory
  Document support for QVariantList and QVariantMap type conversion
  Some doc clarification for components and javascript integration
  Cursor shouldn't blink while dragging cursor position
  Qt.include() docs weren't being picked up by qdoc
  Doc: make it clear that "z" affects sibling stacking order.

37 files changed, 676 insertions, 138 deletions

diff --git a/doc/src/declarative/anchor-layout.qdoc b/doc/src/declarative/anchor-layout.qdoc
index b77ce36..f5d5697 100644
--- a/doc/src/declarative/anchor-layout.qdoc
+++ b/doc/src/declarative/anchor-layout.qdoc
@@ -30,6 +30,8 @@
 \target anchor-layout
 \title Anchor-based Layout in QML
 
+\section1 Overview
+
 In addition to the more traditional \l Grid, \l Row, and \l Column,
 QML also provides a way to layout items using the concept of \e anchors.
 Each item can be thought of as having a set of 7 invisible "anchor lines":
@@ -54,20 +56,6 @@ In this case, the left edge of \e rect2 is bound to the right edge of \e rect1,
 
 \image edge1.png
 
-The anchoring system also allows you to specify margins and offsets. Margins specify the amount of empty space to leave to the outside of an item, while offsets allow you to manipulate positioning using the center anchor lines. Note that margins specified using the anchor layout system only have meaning for anchors; they won't have any effect when using other layouts or absolute positioning.
-
-\image margins_qml.png
-
-The following example specifies a left margin:
-
-\code
-Rectangle { id: rect1; ... }
-Rectangle { id: rect2; anchors.left: rect1.right; anchors.leftMargin: 5; ... }
-\endcode
-
-In this case, a margin of 5 pixels is reserved to the left of \e rect2, producing the following:
-
-\image edge2.png
 
 You can specify multiple anchors. For example:
 
@@ -78,7 +66,9 @@ Rectangle { id: rect2; anchors.left: rect1.right; anchors.top: rect1.bottom; ...
 
 \image edge3.png
 
-By specifying multiple horizontal or vertical anchors you can control the size of an item. For example:
+By specifying multiple horizontal or vertical anchors you can control the size of an item. Below,
+\e rect2 is anchored to the right of \e rect1 and the left of \e rect3. If either of the blue
+rectangles are moved, \e rect2 will stretch and shrink as necessary:
 
 \code
 Rectangle { id: rect1; x: 0; ... }
@@ -88,9 +78,42 @@ Rectangle { id: rect3; x: 150; ... }
 
 \image edge4.png
 
-\section1 Limitations
 
-For performance reasons, you can only anchor an item to its siblings and direct parent. For example, the following anchor would be considered invalid and would produce a warning:
+\section1 Anchor Margins and Offsets
+
+The anchoring system also allows \e margins and \e offsets to be specified for an item's anchors.
+Margins specify the amount of empty space to leave to the outside of an item's anchor, while
+offsets allow positioning to be manipulated using the center anchor lines.  An item can
+specify its anchor margins individually through \l {Item::anchors.leftMargin}{leftMargin},
+\l {Item::anchors.rightMargin}{rightMargin}, \l {Item::anchors.topMargin}{topMargin} and
+\l {Item::anchors.bottomMargin}{bottomMargin}, or use \l {Item::}{anchors.margins} to
+specify the same margin value for all four edges. Anchor offsets are specified using
+\l {Item::anchors.horizontalCenterOffset}{horizontalCenterOffset},
+\l {Item::anchors.verticalCenterOffset}{verticalCenterOffset} and
+\l {Item::anchors.baselineOffset}{baselineOffset}.
+
+\image margins_qml.png
+
+The following example specifies a left margin:
+
+\code
+Rectangle { id: rect1; ... }
+Rectangle { id: rect2; anchors.left: rect1.right; anchors.leftMargin: 5; ... }
+\endcode
+
+In this case, a margin of 5 pixels is reserved to the left of \e rect2, producing the following:
+
+\image edge2.png
+
+\note Anchor margins only apply to anchors; they are \e not a generic means of applying margins to an \l Item.
+If an anchor margin is specified for an edge but the item is not anchored to any item on that
+edge, the margin is not applied.
+
+
+\section1 Restrictions
+
+For performance reasons, you can only anchor an item to its siblings and direct parent. For example,
+the following anchor is invalid and would produce a warning:
 
 \badcode
 Item {
@@ -103,4 +126,13 @@ Item {
 }
 \endcode
 
+Also, anchor-based layouts cannot be mixed with absolute positioning. If an item specifies its
+\l {Item::}{x} position and also sets \l {Item::}{anchors.left},
+or anchors its left and right edges but additionally sets a \l {Item::}{width}, the
+result is undefined, as it would not be clear whether the item should use anchoring or absolute
+positioning. The same can be said for setting an item's \l {Item::}{y} and \l {Item::}{height}
+with \l {Item::}{anchors.top} and \l {Item::}{anchors.bottom}, or setting \l {Item::}{anchors.fill}
+as well as \l {Item::}{width} or \l {Item::}{height}. If you wish to change from using
+anchor-based to absolute positioning, you can clear an anchor value by setting it to \c undefined.
+
 */
diff --git a/doc/src/declarative/javascriptblocks.qdoc b/doc/src/declarative/javascriptblocks.qdoc
index 16d0633..155bd6e 100644
--- a/doc/src/declarative/javascriptblocks.qdoc
+++ b/doc/src/declarative/javascriptblocks.qdoc
@@ -94,9 +94,8 @@ Both relative and absolute JavaScript URLs can be imported.  In the case of a
 relative URL, the location is resolved relative to the location of the
 \l {QML Document} that contains the import.  If the script file is not accessible,
 an error will occur.  If the JavaScript needs to be fetched from a network
-resource, the QML document has a "Loading"
-\l {QDeclarativeComponent::status()}{status} until the script has been
-downloaded.
+resource, the component's \l {QDeclarativeComponent::status()}{status} is set to
+"Loading" until the script has been downloaded.
 
 Imported JavaScript files are always qualified using the "as" keyword.  The
 qualifier for JavaScript files must be unique, so there is always a one-to-one
@@ -143,6 +142,31 @@ As they are shared, stateless library files cannot access QML component instance
 objects or properties directly, although QML values can be passed as function
 parameters.
 
+
+\section2 Importing One JavaScript File From Another
+
+If a JavaScript file needs to use functions defined inside another JavaScript file,
+the other file can be imported using the \l {QML:Qt::include()}{Qt.include()}
+function. This imports all functions from the other file into the current file's
+namespace.
+
+For example, the QML code below left calls \c showCalculations() in \c script.js,
+which in turn can call \c factorial() in \c factorial.js, as it has included
+\c factorial.js using \l {QML:Qt::include()}{Qt.include()}.
+
+\table
+\row
+\o {1,2} \snippet doc/src/snippets/declarative/integrating-javascript/includejs/app.qml 0
+\o \snippet doc/src/snippets/declarative/integrating-javascript/includejs/script.js 0
+\row
+\o \snippet doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js 0
+\endtable
+
+Notice that calling \l {QML:Qt::include()}{Qt.include()} imports all functions from
+\c factorial.js into the \c MyScript namespace, which means the QML component can also
+access \c factorial() directly as \c MyScript.factorial().
+
+
 \section1 Running JavaScript at Startup
 
 It is occasionally necessary to run some imperative code at application (or
diff --git a/doc/src/declarative/qtbinding.qdoc b/doc/src/declarative/qtbinding.qdoc
index 71f41bc..04b8ca6 100644
--- a/doc/src/declarative/qtbinding.qdoc
+++ b/doc/src/declarative/qtbinding.qdoc
@@ -426,6 +426,7 @@ By default, QML recognizes the following data types:
 \o QSize, QSizeF
 \o QRect, QRectF
 \o QVariant
+\o QVariantList, QVariantMap
 \o QObject*
 \o Enumerations declared with Q_ENUMS()
 \endlist
@@ -434,6 +435,37 @@ To allow a custom C++ type to be created or used in QML, the C++ class must be r
 type using qmlRegisterType(), as shown in the \l {Defining new QML elements} section above.
 
 
+\section2 JavaScript arrays and objects
+
+There is built-in support for automatic type conversion between QVariantList and JavaScript
+arrays, and QVariantMap and JavaScript objects.
+
+For example, the function defined in QML below left expects two arguments, an array and an object, and prints
+their contents using the standard JavaScript syntax for array and object item access. The C++ code
+below right calls this function, passing a QVariantList and a QVariantMap, which are automatically
+converted to JavaScript array and object values, repectively:
+
+\table
+\row
+\o \snippet doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml 0
+\o \snippet doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp 0
+\endtable
+
+This produces output like:
+
+\code
+Array item: 10
+Array item: #00ff00
+Array item: bottles
+Object item: language = QML
+Object item: released = Tue Sep 21 2010 00:00:00 GMT+1000 (EST)
+\endcode
+
+Similarly, if a C++ type uses a QVariantList or QVariantMap type for a property or method
+parameter, the value can be created as a JavaScript array or object in the QML
+side, and is automatically converted to a QVariantList or QVariantMap when it is passed to C++.
+
+
 \section2 Using enumerations of a custom type
 
 To use an enumeration from a custom C++ component, the enumeration must be declared with Q_ENUMS() to
@@ -455,7 +487,7 @@ See the \l {Tutorial: Writing QML extensions with C++}{Writing QML extensions wi
 the \l {Extending QML in C++} reference documentation for more information.
 
 
-\section2 Automatic type conversion
+\section2 Automatic type conversion from strings
 
 As a convenience, some basic types can be specified in QML using format strings to make it easier to
 pass simple values from QML to C++.
diff --git a/doc/src/snippets/declarative/integrating-javascript/includejs/app.qml b/doc/src/snippets/declarative/integrating-javascript/includejs/app.qml
new file mode 100644
index 0000000..2ecc475
--- /dev/null
+++ b/doc/src/snippets/declarative/integrating-javascript/includejs/app.qml
@@ -0,0 +1,56 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+//![0]
+import QtQuick 1.0
+import "script.js" as MyScript
+
+Item {
+    width: 100; height: 100
+
+    MouseArea {
+        anchors.fill: parent
+        onClicked: {
+            MyScript.showCalculations(10)
+            console.log("Call factorial() from QML:",
+                MyScript.factorial(10))
+        }
+    }
+}
+//![0]
diff --git a/doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js b/doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js
new file mode 100644
index 0000000..0a01e9e
--- /dev/null
+++ b/doc/src/snippets/declarative/integrating-javascript/includejs/factorial.js
@@ -0,0 +1,49 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+//![0]
+// factorial.js
+function factorial(a) {
+    a = parseInt(a);
+    if (a <= 0)
+        return 1;
+    else
+        return a * factorial(a - 1);
+}
+//![0]
diff --git a/doc/src/snippets/declarative/integrating-javascript/includejs/script.js b/doc/src/snippets/declarative/integrating-javascript/includejs/script.js
new file mode 100644
index 0000000..7380412
--- /dev/null
+++ b/doc/src/snippets/declarative/integrating-javascript/includejs/script.js
@@ -0,0 +1,48 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+//![0]
+// script.js
+Qt.include("factorial.js")
+
+function showCalculations(value) {
+    console.log("Call factorial() from script.js:",
+        factorial(value));
+}
+//![0]
diff --git a/doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml b/doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml
new file mode 100644
index 0000000..dd59fed
--- /dev/null
+++ b/doc/src/snippets/declarative/qtbinding/variantlistmap/MyItem.qml
@@ -0,0 +1,54 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+import QtQuick 1.0
+
+//![0]
+// MyItem.qml
+Item {
+    function readValues(anArray, anObject) {
+        for (var i=0; i<anArray.length; i++)
+            console.log("Array item:", anArray[i])
+
+        for (var prop in anObject) {
+            console.log("Object item:", prop, "=", anObject[prop])
+        }
+    }
+}
+//![0]
diff --git a/doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp b/doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp
new file mode 100644
index 0000000..9986264
--- /dev/null
+++ b/doc/src/snippets/declarative/qtbinding/variantlistmap/main.cpp
@@ -0,0 +1,67 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:BSD$
+** You may use this file under the terms of the BSD license as follows:
+**
+** "Redistribution and use in source and binary forms, with or without
+** modification, are permitted provided that the following conditions are
+** met:
+**   * Redistributions of source code must retain the above copyright
+**     notice, this list of conditions and the following disclaimer.
+**   * Redistributions in binary form must reproduce the above copyright
+**     notice, this list of conditions and the following disclaimer in
+**     the documentation and/or other materials provided with the
+**     distribution.
+**   * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor
+**     the names of its contributors may be used to endorse or promote
+**     products derived from this software without specific prior written
+**     permission.
+**
+** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
+** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+#include <QtCore>
+#include <QtDeclarative>
+
+int main(int argc, char *argv[]) {
+    QApplication app(argc, argv);
+
+//![0]
+// C++
+QDeclarativeView view(QUrl::fromLocalFile("MyItem.qml"));
+
+QVariantList list;
+list << 10 << Qt::green << "bottles";
+
+QVariantMap map;
+map.insert("language", "QML");
+map.insert("released", QDate(2010, 9, 21));
+
+QMetaObject::invokeMethod(view.rootObject(), "readValues",
+        Q_ARG(QVariant, QVariant::fromValue(list)),
+        Q_ARG(QVariant, QVariant::fromValue(map)));
+//![0]
+
+    view.setSource(QUrl::fromLocalFile("MyItem.qml"));
+    view.show();
+
+    return app.exec();
+}
+
diff --git a/doc/src/snippets/declarative/qtbinding/variantlistmap/variantlistmap.pro b/doc/src/snippets/declarative/qtbinding/variantlistmap/variantlistmap.pro
new file mode 100644
index 0000000..68eeaf2
--- /dev/null
+++ b/doc/src/snippets/declarative/qtbinding/variantlistmap/variantlistmap.pro
@@ -0,0 +1,2 @@
+QT += declarative
+SOURCES += main.cpp
diff --git a/src/declarative/graphicsitems/qdeclarativegridview.cpp b/src/declarative/graphicsitems/qdeclarativegridview.cpp
index 1615b0f..4a6a9dc 100644
--- a/src/declarative/graphicsitems/qdeclarativegridview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativegridview.cpp
@@ -735,7 +735,7 @@ void QDeclarativeGridViewPrivate::createHighlight()
             QDeclarative_setParent_noEvent(item, q->contentItem());
             item->setParentItem(q->contentItem());
             highlight = new FxGridItem(item, q);
-            if (currentItem)
+            if (currentItem && autoHighlight)
                 highlight->setPosition(currentItem->colPos(), currentItem->rowPos());
             highlightXAnimator = new QSmoothedAnimation(q);
             highlightXAnimator->target = QDeclarativeProperty(highlight->item, QLatin1String("x"));
@@ -1253,7 +1253,8 @@ void QDeclarativeGridView::setModel(const QVariant &model)
                 d->moveReason = QDeclarativeGridViewPrivate::SetIndex;
                 d->updateCurrent(d->currentIndex);
                 if (d->highlight && d->currentItem) {
-                    d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
+                    if (d->autoHighlight)
+                        d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
                     d->updateTrackedItem();
                 }
                 d->moveReason = QDeclarativeGridViewPrivate::Other;
@@ -1321,7 +1322,8 @@ void QDeclarativeGridView::setDelegate(QDeclarativeComponent *delegate)
             d->moveReason = QDeclarativeGridViewPrivate::SetIndex;
             d->updateCurrent(d->currentIndex);
             if (d->highlight && d->currentItem) {
-                d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
+                if (d->autoHighlight)
+                    d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
                 d->updateTrackedItem();
             }
             d->moveReason = QDeclarativeGridViewPrivate::Other;
@@ -2241,7 +2243,8 @@ void QDeclarativeGridView::componentComplete()
         else
             d->updateCurrent(d->currentIndex);
         if (d->highlight && d->currentItem) {
-            d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
+            if (d->autoHighlight)
+                d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
             d->updateTrackedItem();
         }
         d->moveReason = QDeclarativeGridViewPrivate::Other;
@@ -2649,7 +2652,8 @@ void QDeclarativeGridView::modelReset()
     d->moveReason = QDeclarativeGridViewPrivate::SetIndex;
     d->updateCurrent(d->currentIndex);
     if (d->highlight && d->currentItem) {
-        d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
+        if (d->autoHighlight)
+            d->highlight->setPosition(d->currentItem->colPos(), d->currentItem->rowPos());
         d->updateTrackedItem();
     }
     d->moveReason = QDeclarativeGridViewPrivate::Other;
diff --git a/src/declarative/graphicsitems/qdeclarativeitem.cpp b/src/declarative/graphicsitems/qdeclarativeitem.cpp
index 9d6fe12..75e4a0b 100644
--- a/src/declarative/graphicsitems/qdeclarativeitem.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeitem.cpp
@@ -1809,9 +1809,9 @@ void QDeclarativeItem::setClip(bool c)
 /*!
   \qmlproperty real Item::z
 
-  Sets the stacking order of the item.  By default the stacking order is 0.
+  Sets the stacking order of sibling items.  By default the stacking order is 0.
 
-  Items with a higher stacking value are drawn on top of items with a
+  Items with a higher stacking value are drawn on top of siblings with a
   lower stacking order.  Items with the same stacking value are drawn
   bottom up in the order they appear.  Items with a negative stacking
   value are drawn under their parent's content.
@@ -2112,6 +2112,8 @@ QDeclarativeAnchorLine QDeclarativeItemPrivate::baseline() const
 
   Margins apply to top, bottom, left, right, and fill anchors.
   The \c anchors.margins property can be used to set all of the various margins at once, to the same value.
+  Note that margins are anchor-specific and are not applied if an item does not
+  use anchors.
 
   Offsets apply for horizontal center, vertical center, and baseline anchors.
 
diff --git a/src/declarative/graphicsitems/qdeclarativelistview.cpp b/src/declarative/graphicsitems/qdeclarativelistview.cpp
index 845da79..d008f91 100644
--- a/src/declarative/graphicsitems/qdeclarativelistview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativelistview.cpp
@@ -739,16 +739,20 @@ void QDeclarativeListViewPrivate::layout()
         return;
     }
     if (!visibleItems.isEmpty()) {
-        qreal oldEnd = visibleItems.last()->endPosition();
+        bool fixedCurrent = currentItem && visibleItems.first()->item == currentItem->item;
+        qreal sum = visibleItems.first()->size();
         qreal pos = visibleItems.first()->position() + visibleItems.first()->size() + spacing;
         for (int i=1; i < visibleItems.count(); ++i) {
             FxListItem *item = visibleItems.at(i);
             item->setPosition(pos);
             pos += item->size() + spacing;
+            sum += item->size();
+            fixedCurrent = fixedCurrent || (currentItem && item->item == currentItem->item);
         }
-        // move current item if it is after the visible items.
-        if (currentItem && currentIndex > lastVisibleIndex())
-            currentItem->setPosition(currentItem->position() + (visibleItems.last()->endPosition() - oldEnd));
+        averageSize = qRound(sum / visibleItems.count());
+        // move current item if it is not a visible item.
+        if (currentIndex >= 0 && currentItem && !fixedCurrent)
+            currentItem->setPosition(positionAt(currentIndex));
     }
     q->refill();
     minExtentDirty = true;
@@ -1567,7 +1571,8 @@ void QDeclarativeListView::setModel(const QVariant &model)
                 d->moveReason = QDeclarativeListViewPrivate::SetIndex;
                 d->updateCurrent(d->currentIndex);
                 if (d->highlight && d->currentItem) {
-                    d->highlight->setPosition(d->currentItem->position());
+                    if (d->autoHighlight)
+                        d->highlight->setPosition(d->currentItem->position());
                     d->updateTrackedItem();
                 }
             }
@@ -1638,7 +1643,8 @@ void QDeclarativeListView::setDelegate(QDeclarativeComponent *delegate)
             d->moveReason = QDeclarativeListViewPrivate::SetIndex;
             d->updateCurrent(d->currentIndex);
             if (d->highlight && d->currentItem) {
-                d->highlight->setPosition(d->currentItem->position());
+                if (d->autoHighlight)
+                    d->highlight->setPosition(d->currentItem->position());
                 d->updateTrackedItem();
             }
         }
@@ -2628,8 +2634,10 @@ void QDeclarativeListView::positionViewAtIndex(int index, int mode)
         cancelFlick();
         d->setPosition(pos);
         if (d->highlight) {
-            d->highlight->setPosition(d->currentItem->itemPosition());
-            d->highlight->setSize(d->currentItem->itemSize());
+            if (d->autoHighlight) {
+                d->highlight->setPosition(d->currentItem->itemPosition());
+                d->highlight->setSize(d->currentItem->itemSize());
+            }
             d->updateHighlight();
         }
     }
@@ -2675,7 +2683,8 @@ void QDeclarativeListView::componentComplete()
         else
             d->updateCurrent(d->currentIndex);
         if (d->highlight && d->currentItem) {
-            d->highlight->setPosition(d->currentItem->position());
+            if (d->autoHighlight)
+                d->highlight->setPosition(d->currentItem->position());
             d->updateTrackedItem();
         }
         d->moveReason = QDeclarativeListViewPrivate::Other;
@@ -3138,7 +3147,8 @@ void QDeclarativeListView::modelReset()
     d->moveReason = QDeclarativeListViewPrivate::SetIndex;
     d->updateCurrent(d->currentIndex);
     if (d->highlight && d->currentItem) {
-        d->highlight->setPosition(d->currentItem->position());
+        if (d->autoHighlight)
+            d->highlight->setPosition(d->currentItem->position());
         d->updateTrackedItem();
     }
     d->moveReason = QDeclarativeListViewPrivate::Other;
diff --git a/src/declarative/graphicsitems/qdeclarativepathview.cpp b/src/declarative/graphicsitems/qdeclarativepathview.cpp
index 7c79afe..87ea214 100644
--- a/src/declarative/graphicsitems/qdeclarativepathview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativepathview.cpp
@@ -1478,7 +1478,7 @@ void QDeclarativePathView::itemsRemoved(int modelIndex, int count)
         currentChanged = true;
     } else if (d->currentIndex >= modelIndex && d->currentIndex < modelIndex + count) {
         // current item has been removed.
-        d->currentIndex = qMin(modelIndex, d->modelCount-1);
+        d->currentIndex = qMin(modelIndex, d->modelCount-count-1);
         if (d->currentItem) {
             if (QDeclarativePathViewAttached *att = d->attached(d->currentItem))
                 att->setIsCurrentItem(true);
diff --git a/src/declarative/graphicsitems/qdeclarativetextinput.cpp b/src/declarative/graphicsitems/qdeclarativetextinput.cpp
index f8421a3..df103de 100644
--- a/src/declarative/graphicsitems/qdeclarativetextinput.cpp
+++ b/src/declarative/graphicsitems/qdeclarativetextinput.cpp
@@ -1479,6 +1479,7 @@ void QDeclarativeTextInput::cursorPosChanged()
     updateRect();//TODO: Only update rect between pos's
     updateMicroFocus();
     emit cursorPositionChanged();
+    d->control->resetCursorBlinkTimer();
 
     if(!d->control->hasSelectedText()){
         if(d->lastSelectionStart != d->control->cursor()){
diff --git a/src/declarative/qml/qdeclarativecomponent.cpp b/src/declarative/qml/qdeclarativecomponent.cpp
index 63bde0f..77fc925 100644
--- a/src/declarative/qml/qdeclarativecomponent.cpp
+++ b/src/declarative/qml/qdeclarativecomponent.cpp
@@ -147,32 +147,36 @@ class QByteArray;
     Components are reusable, encapsulated QML elements with well-defined interfaces.
 
     Components are often defined by \l {qdeclarativedocuments.html}{component files} -
-    that is, \c .qml files. The \e Component element allows components to be defined
-    within QML items rather than in a separate file. This may be useful for reusing 
-    a small component within a QML file, or for defining a component that logically 
-    belongs with other QML components within a file.
+    that is, \c .qml files. The \e Component element essentially allows QML components
+    to be defined inline, within a \l {QML Document}{QML document}, rather than as a separate QML file.
+    This may be useful for reusing a small component within a QML file, or for defining
+    a component that logically belongs with other QML components within a file.
 
     For example, here is a component that is used by multiple \l Loader objects.
-    It contains a top level \l Rectangle item:
+    It contains a single item, a \l Rectangle:
 
     \snippet doc/src/snippets/declarative/component.qml 0
 
     Notice that while a \l Rectangle by itself would be automatically 
     rendered and displayed, this is not the case for the above rectangle
     because it is defined inside a \c Component. The component encapsulates the
-    QML elements within, as if they were defined in a separate \c .qml
+    QML elements within, as if they were defined in a separate QML
     file, and is not loaded until requested (in this case, by the
     two \l Loader objects).
 
-    A Component cannot contain anything other
-    than an \c id and a single top level item. While the \c id is optional,
-    the top level item is not; you cannot define an empty component.
+    Defining a \c Component is similar to defining a \l {QML Document}{QML document}.
+    A QML document has a single top-level item that defines the behaviors and
+    properties of that component, and cannot define properties or behaviors outside
+    of that top-level item. In the same way, a \c Component definition contains a single
+    top level item (which in the above example is a \l Rectangle) and cannot define any
+    data outside of this item, with the exception of an \e id (which in the above example
+    is \e redSquare).
 
-    The Component element is commonly used to provide graphical components
-    for views. For example, the ListView::delegate property requires a Component
+    The \c Component element is commonly used to provide graphical components
+    for views. For example, the ListView::delegate property requires a \c Component
     to specify how each list item is to be displayed.
 
-    Component objects can also be dynamically created using
+    \c Component objects can also be created dynamically using
     \l{QML:Qt::createComponent()}{Qt.createComponent()}.
 */
 
diff --git a/src/declarative/qml/qdeclarativeengine.cpp b/src/declarative/qml/qdeclarativeengine.cpp
index a8404f0..201e675 100644
--- a/src/declarative/qml/qdeclarativeengine.cpp
+++ b/src/declarative/qml/qdeclarativeengine.cpp
@@ -261,6 +261,33 @@ of their use.
 \endlist
 */
 
+/*!
+\qmlmethod object Qt::include(string url, jsobject callback)
+
+Includes another JavaScript file. This method can only be used from within JavaScript files,
+and not regular QML files.
+
+This imports all functions from \a url into the current script's namespace.
+
+Qt.include() returns an object that describes the status of the operation.  The object has
+a single property, \c {status}, that is set to one of the following values:
+
+\table
+\header \o Symbol \o Value \o Description
+\row \o result.OK \o 0 \o The include completed successfully.
+\row \o result.LOADING \o 1 \o Data is being loaded from the network.
+\row \o result.NETWORK_ERROR \o 2 \o A network error occurred while fetching the url.
+\row \o result.EXCEPTION \o 3 \o A JavaScript exception occurred while executing the included code.
+An additional \c exception property will be set in this case.
+\endtable
+
+The \c status property will be updated as the operation progresses.
+
+If provided, \a callback is invoked when the operation completes.  The callback is passed
+the same object as is returned from the Qt.include() call.
+*/
+// Qt.include() is implemented in qdeclarativeinclude.cpp
+
 
 QDeclarativeEnginePrivate::QDeclarativeEnginePrivate(QDeclarativeEngine *e)
 : captureProperties(false), rootContext(0), isDebugging(false),
diff --git a/src/declarative/qml/qdeclarativeinclude.cpp b/src/declarative/qml/qdeclarativeinclude.cpp
index 1e240d7..a9ecdda 100644
--- a/src/declarative/qml/qdeclarativeinclude.cpp
+++ b/src/declarative/qml/qdeclarativeinclude.cpp
@@ -172,28 +172,8 @@ void QDeclarativeInclude::callback(QScriptEngine *engine, QScriptValue &callback
     }
 }
 
-/*!
-\qmlmethod object Qt::include(string url, jsobject callback)
-
-Include another JavaScript file.  This method can only be used from within JavaScript files, 
-and not regular QML files.
-
-Qt.include() returns an object that describes the status of the operation.  The object has
-a single property, \c {status} that is set to one of the following values:
-
-\table
-\header \o Symbol \o Value \o Description
-\row \o result.OK \o 0 \o The include completed successfully.
-\row \o result.LOADING \o 1 \o Data is being loaded from the network.
-\row \o result.NETWORK_ERROR \o 2 \o A network error occurred while fetching the url.
-\row \o result.EXCEPTION \o 3 \o A JavaScript exception occurred while executing the included code.
-An additional \c exception property will be set in this case.
-\endtable
-
-The return object's properties will be updated as the operation progresses.
-
-If provided, \a callback is invoked when the operation completes.  The callback is passed
-the same object as is returned from the Qt.include() call.
+/*
+    Documented in qdeclarativeengine.cpp
 */
 QScriptValue QDeclarativeInclude::include(QScriptContext *ctxt, QScriptEngine *engine)
 {
diff --git a/src/declarative/qml/qdeclarativeproperty.cpp b/src/declarative/qml/qdeclarativeproperty.cpp
index df0917f..60edd64 100644
--- a/src/declarative/qml/qdeclarativeproperty.cpp
+++ b/src/declarative/qml/qdeclarativeproperty.cpp
@@ -77,15 +77,28 @@ a property on a specific object instance.  To read a property's value, programme
 QDeclarativeProperty instance and call the read() method.  Likewise to write a property value the
 write() method is used.
 
+For example, for the following QML code:
+
+\qml
+// MyItem.qml
+import QtQuick 1.0
+
+Text { text: "A bit of text" }
+\endqml
+
+The \l Text object's properties could be accessed using QDeclarativeProperty, like this:
+
 \code
+#include <QDeclarativeProperty>
+#include <QGraphicsObject>
 
-QObject *object = declarativeComponent.create();
+...
 
-QDeclarativeProperty property(object, "font.pixelSize");
+QDeclarativeView view(QUrl::fromLocalFile("MyItem.qml"));
+QDeclarativeProperty property(view.rootObject(), "font.pixelSize");
 qWarning() << "Current pixel size:" << property.read().toInt();
 property.write(24);
 qWarning() << "Pixel size should now be 24:" << property.read().toInt();
-
 \endcode
 */
 
diff --git a/src/declarative/qml/qdeclarativesqldatabase.cpp b/src/declarative/qml/qdeclarativesqldatabase.cpp
index 45f277e..bda02a5 100644
--- a/src/declarative/qml/qdeclarativesqldatabase.cpp
+++ b/src/declarative/qml/qdeclarativesqldatabase.cpp
@@ -172,16 +172,23 @@ static const char* sqlerror[] = {
     return errorValue; \
 }
 
-
-static QString databaseFile(const QString& connectionName, QScriptEngine *engine)
+static QString qmlsqldatabase_databasesPath(QScriptEngine *engine)
 {
     QDeclarativeScriptEngine *qmlengine = static_cast<QDeclarativeScriptEngine*>(engine);
-    QString basename = qmlengine->offlineStoragePath
-                + QDir::separator() + QLatin1String("Databases") + QDir::separator();
-    basename += connectionName;
-    return basename;
+    return qmlengine->offlineStoragePath
+            + QDir::separator() + QLatin1String("Databases");
 }
 
+static void qmlsqldatabase_initDatabasesPath(QScriptEngine *engine)
+{
+    QDir().mkpath(qmlsqldatabase_databasesPath(engine));
+}
+
+static QString qmlsqldatabase_databaseFile(const QString& connectionName, QScriptEngine *engine)
+{
+    return qmlsqldatabase_databasesPath(engine) + QDir::separator()
+            + connectionName;
+}
 
 
 static QScriptValue qmlsqldatabase_item(QScriptContext *context, QScriptEngine *engine)
@@ -302,7 +309,7 @@ static QScriptValue qmlsqldatabase_change_version(QScriptContext *context, QScri
 
     if (ok) {
         context->thisObject().setProperty(QLatin1String("version"), to_version, QScriptValue::ReadOnly);
-        QSettings ini(databaseFile(db.connectionName(),engine)+QLatin1String(".ini"),QSettings::IniFormat);
+        QSettings ini(qmlsqldatabase_databaseFile(db.connectionName(),engine) + QLatin1String(".ini"), QSettings::IniFormat);
         ini.setValue(QLatin1String("Version"), to_version);
     }
 
@@ -348,6 +355,8 @@ static QScriptValue qmlsqldatabase_read_transaction(QScriptContext *context, QSc
 */
 static QScriptValue qmlsqldatabase_open_sync(QScriptContext *context, QScriptEngine *engine)
 {
+    qmlsqldatabase_initDatabasesPath(engine);
+
     QSqlDatabase database;
 
     QString dbname = context->argument(0).toString();
@@ -360,7 +369,7 @@ static QScriptValue qmlsqldatabase_open_sync(QScriptContext *context, QScriptEng
     md5.addData(dbname.toUtf8());
     QString dbid(QLatin1String(md5.result().toHex()));
 
-    QString basename = databaseFile(dbid,engine);
+    QString basename = qmlsqldatabase_databaseFile(dbid, engine);
     bool created = false;
     QString version = dbversion;
 
@@ -375,7 +384,6 @@ static QScriptValue qmlsqldatabase_open_sync(QScriptContext *context, QScriptEng
         } else {
             created = !QFile::exists(basename+QLatin1String(".sqlite"));
             database = QSqlDatabase::addDatabase(QLatin1String("QSQLITE"), dbid);
-            QDir().mkpath(basename);
             if (created) {
                 ini.setValue(QLatin1String("Name"), dbname);
                 if (dbcreationCallback.isFunction())
diff --git a/src/gui/widgets/qlinecontrol.cpp b/src/gui/widgets/qlinecontrol.cpp
index f338f40..5ea9dc4 100644
--- a/src/gui/widgets/qlinecontrol.cpp
+++ b/src/gui/widgets/qlinecontrol.cpp
@@ -1308,6 +1308,15 @@ void QLineControl::setCursorBlinkPeriod(int msec)
     m_blinkPeriod = msec;
 }
 
+void QLineControl::resetCursorBlinkTimer()
+{
+    if (m_blinkPeriod == 0 || m_blinkTimer == 0)
+        return;
+    killTimer(m_blinkTimer);
+    m_blinkTimer = startTimer(m_blinkPeriod / 2);
+    m_blinkStatus = 1;
+}
+
 void QLineControl::timerEvent(QTimerEvent *event)
 {
     if (event->timerId() == m_blinkTimer) {
diff --git a/src/gui/widgets/qlinecontrol_p.h b/src/gui/widgets/qlinecontrol_p.h
index 7068f62..d881acf 100644
--- a/src/gui/widgets/qlinecontrol_p.h
+++ b/src/gui/widgets/qlinecontrol_p.h
@@ -296,6 +296,7 @@ public:
 
     int cursorBlinkPeriod() const { return m_blinkPeriod; }
     void setCursorBlinkPeriod(int msec);
+    void resetCursorBlinkTimer();
 
     QString cancelText() const { return m_cancelText; }
     void setCancelText(const QString &text) { m_cancelText = text; }
diff --git a/src/s60installs/bwins/QtGuiu.def b/src/s60installs/bwins/QtGuiu.def
index 6a33fc3..bf4d99f 100644
--- a/src/s60installs/bwins/QtGuiu.def
+++ b/src/s60installs/bwins/QtGuiu.def
@@ -2725,7 +2725,7 @@ EXPORTS
 	?clearSelection@QTextCursor@@QAEXXZ @ 2724 NONAME ; void QTextCursor::clearSelection(void)
 	?clearSpans@QTableView@@QAEXXZ @ 2725 NONAME ; void QTableView::clearSpans(void)
 	?clearString@QLineControl@@ABE?AVQString@@II@Z @ 2726 NONAME ; class QString QLineControl::clearString(unsigned int, unsigned int) const
-	?clearSubFocus@QGraphicsItemPrivate@@QAEXPAVQGraphicsItem@@@Z @ 2727 NONAME ; void QGraphicsItemPrivate::clearSubFocus(class QGraphicsItem *)
+	?clearSubFocus@QGraphicsItemPrivate@@QAEXPAVQGraphicsItem@@@Z @ 2727 NONAME ABSENT ; void QGraphicsItemPrivate::clearSubFocus(class QGraphicsItem *)
 	?clearUndo@QLineControl@@QAEXXZ @ 2728 NONAME ; void QLineControl::clearUndo(void)
 	?click@QAbstractButton@@QAEXXZ @ 2729 NONAME ; void QAbstractButton::click(void)
 	?clicked@QAbstractButton@@IAEX_N@Z @ 2730 NONAME ; void QAbstractButton::clicked(bool)
@@ -9914,7 +9914,7 @@ EXPORTS
 	?setStyleSheet@QWidget@@QAEXABVQString@@@Z @ 9913 NONAME ; void QWidget::setStyleSheet(class QString const &)
 	?setStyleStrategy@QFont@@QAEXW4StyleStrategy@1@@Z @ 9914 NONAME ; void QFont::setStyleStrategy(enum QFont::StyleStrategy)
 	?setStyle_helper@QWidgetPrivate@@QAEXPAVQStyle@@_N1@Z @ 9915 NONAME ; void QWidgetPrivate::setStyle_helper(class QStyle *, bool, bool)
-	?setSubFocus@QGraphicsItemPrivate@@QAEXPAVQGraphicsItem@@@Z @ 9916 NONAME ; void QGraphicsItemPrivate::setSubFocus(class QGraphicsItem *)
+	?setSubFocus@QGraphicsItemPrivate@@QAEXPAVQGraphicsItem@@@Z @ 9916 NONAME ABSENT ; void QGraphicsItemPrivate::setSubFocus(class QGraphicsItem *)
 	?setSubTitle@QWizardPage@@QAEXABVQString@@@Z @ 9917 NONAME ; void QWizardPage::setSubTitle(class QString const &)
 	?setSubTitleFormat@QWizard@@QAEXW4TextFormat@Qt@@@Z @ 9918 NONAME ; void QWizard::setSubTitleFormat(enum Qt::TextFormat)
 	?setSubmitPolicy@QDataWidgetMapper@@QAEXW4SubmitPolicy@1@@Z @ 9919 NONAME ; void QDataWidgetMapper::setSubmitPolicy(enum QDataWidgetMapper::SubmitPolicy)
@@ -12905,4 +12905,7 @@ EXPORTS
 	?reactivateDeferredActiveObjects@QEventDispatcherS60@@UAEXXZ @ 12904 NONAME ; void QEventDispatcherS60::reactivateDeferredActiveObjects(void)
 	?userData@QStaticTextItem@@QBEPAVQStaticTextUserData@@XZ @ 12905 NONAME ; class QStaticTextUserData * QStaticTextItem::userData(void) const
 	?populate@QTextureGlyphCache@@QAE_NPAVQFontEngine@@HPBIPBUQFixedPoint@@@Z @ 12906 NONAME ; bool QTextureGlyphCache::populate(class QFontEngine *, int, unsigned int const *, struct QFixedPoint const *)
+	?resetCursorBlinkTimer@QLineControl@@QAEXXZ @ 12907 NONAME ; void QLineControl::resetCursorBlinkTimer(void)
+	?setSubFocus@QGraphicsItemPrivate@@QAEXPAVQGraphicsItem@@0@Z @ 12908 NONAME ; void QGraphicsItemPrivate::setSubFocus(class QGraphicsItem *, class QGraphicsItem *)
+	?clearSubFocus@QGraphicsItemPrivate@@QAEXPAVQGraphicsItem@@0@Z @ 12909 NONAME ; void QGraphicsItemPrivate::clearSubFocus(class QGraphicsItem *, class QGraphicsItem *)
 
diff --git a/src/s60installs/eabi/QtGuiu.def b/src/s60installs/eabi/QtGuiu.def
index 632326d..48976a1 100644
--- a/src/s60installs/eabi/QtGuiu.def
+++ b/src/s60installs/eabi/QtGuiu.def
@@ -12107,4 +12107,5 @@ EXPORTS
 	_ZN19QEventDispatcherS6031reactivateDeferredActiveObjectsEv @ 12106 NONAME
 	_ZN20QGraphicsItemPrivate11setSubFocusEP13QGraphicsItemS1_ @ 12107 NONAME
 	_ZN20QGraphicsItemPrivate13clearSubFocusEP13QGraphicsItemS1_ @ 12108 NONAME
+	_ZN12QLineControl21resetCursorBlinkTimerEv @ 12109 NONAME
 
diff --git a/tests/auto/declarative/qdeclarativegridview/data/manual-highlight.qml b/tests/auto/declarative/qdeclarativegridview/data/manual-highlight.qml
index 7bb2c95..d082847 100644
--- a/tests/auto/declarative/qdeclarativegridview/data/manual-highlight.qml
+++ b/tests/auto/declarative/qdeclarativegridview/data/manual-highlight.qml
@@ -28,8 +28,8 @@ Item {
             objectName: "highlight"
             width: 80; height: 80
             color: "lightsteelblue"; radius: 5
-            y: grid.currentItem.y
-            x: grid.currentItem.x
+            y: grid.currentItem.y+5
+            x: grid.currentItem.x+5
         }
     }
 
diff --git a/tests/auto/declarative/qdeclarativegridview/tst_qdeclarativegridview.cpp b/tests/auto/declarative/qdeclarativegridview/tst_qdeclarativegridview.cpp
index 7998e30..fd5d140 100644
--- a/tests/auto/declarative/qdeclarativegridview/tst_qdeclarativegridview.cpp
+++ b/tests/auto/declarative/qdeclarativegridview/tst_qdeclarativegridview.cpp
@@ -1215,15 +1215,22 @@ void tst_QDeclarativeGridView::manualHighlight()
 
     QTRY_COMPARE(gridview->currentIndex(), 0);
     QTRY_COMPARE(gridview->currentItem(), findItem<QDeclarativeItem>(contentItem, "wrapper", 0));
-    QTRY_COMPARE(gridview->highlightItem()->y(), gridview->currentItem()->y());
-    QTRY_COMPARE(gridview->highlightItem()->x(), gridview->currentItem()->x());
+    QTRY_COMPARE(gridview->highlightItem()->y() - 5, gridview->currentItem()->y());
+    QTRY_COMPARE(gridview->highlightItem()->x() - 5, gridview->currentItem()->x());
 
     gridview->setCurrentIndex(2);
 
     QTRY_COMPARE(gridview->currentIndex(), 2);
     QTRY_COMPARE(gridview->currentItem(), findItem<QDeclarativeItem>(contentItem, "wrapper", 2));
-    QTRY_COMPARE(gridview->highlightItem()->y(), gridview->currentItem()->y());
-    QTRY_COMPARE(gridview->highlightItem()->x(), gridview->currentItem()->x());
+    QTRY_COMPARE(gridview->highlightItem()->y() - 5, gridview->currentItem()->y());
+    QTRY_COMPARE(gridview->highlightItem()->x() - 5, gridview->currentItem()->x());
+
+    gridview->positionViewAtIndex(8, QDeclarativeGridView::Contain);
+
+    QTRY_COMPARE(gridview->currentIndex(), 2);
+    QTRY_COMPARE(gridview->currentItem(), findItem<QDeclarativeItem>(contentItem, "wrapper", 2));
+    QTRY_COMPARE(gridview->highlightItem()->y() - 5, gridview->currentItem()->y());
+    QTRY_COMPARE(gridview->highlightItem()->x() - 5, gridview->currentItem()->x());
 }
 
 void tst_QDeclarativeGridView::footer()
diff --git a/tests/auto/declarative/qdeclarativelistview/data/displaylist.qml b/tests/auto/declarative/qdeclarativelistview/data/displaylist.qml
index 487b70e..9d58530 100644
--- a/tests/auto/declarative/qdeclarativelistview/data/displaylist.qml
+++ b/tests/auto/declarative/qdeclarativelistview/data/displaylist.qml
@@ -1,6 +1,8 @@
 import QtQuick 1.0
 
 Rectangle {
+    id: root
+    property real delegateHeight: 20
     width: 240
     height: 320
     color: "#ffffff"
@@ -10,7 +12,8 @@ Rectangle {
             Rectangle {
                 id: wrapper
                 objectName: "wrapper"
-                height: 20
+                height: root.delegateHeight
+                Behavior on height { NumberAnimation {} }
                 width: 240
                 Text {
                     text: index
@@ -20,6 +23,10 @@ Rectangle {
                     objectName: "displayText"
                     text: display
                 }
+                Text {
+                    x: 200
+                    text: wrapper.y
+                }
                 color: ListView.isCurrentItem ? "lightsteelblue" : "white"
             }
         },
diff --git a/tests/auto/declarative/qdeclarativelistview/data/manual-highlight.qml b/tests/auto/declarative/qdeclarativelistview/data/manual-highlight.qml
index d8cfd9a..a32a194 100644
--- a/tests/auto/declarative/qdeclarativelistview/data/manual-highlight.qml
+++ b/tests/auto/declarative/qdeclarativelistview/data/manual-highlight.qml
@@ -28,7 +28,7 @@ Item {
             objectName: "highlight"
             width: 180; height: 20
             color: "lightsteelblue"; radius: 5
-            y: list.currentItem.y
+            y: list.currentItem.y+5
         }
     }
 
diff --git a/tests/auto/declarative/qdeclarativelistview/tst_qdeclarativelistview.cpp b/tests/auto/declarative/qdeclarativelistview/tst_qdeclarativelistview.cpp
index 759caf2..ff90d32 100644
--- a/tests/auto/declarative/qdeclarativelistview/tst_qdeclarativelistview.cpp
+++ b/tests/auto/declarative/qdeclarativelistview/tst_qdeclarativelistview.cpp
@@ -103,6 +103,7 @@ private slots:
     void resizeView();
     void sizeLessThan1();
     void QTBUG_14821();
+    void resizeDelegate();
 
 private:
     template <class T> void items();
@@ -1406,6 +1407,8 @@ void tst_QDeclarativeListView::resetModel()
         QTRY_VERIFY(display != 0);
         QTRY_COMPARE(display->text(), strings.at(i));
     }
+
+    delete canvas;
 }
 
 void tst_QDeclarativeListView::propertyChanges()
@@ -1606,13 +1609,22 @@ void tst_QDeclarativeListView::manualHighlight()
 
     QTRY_COMPARE(listview->currentIndex(), 0);
     QTRY_COMPARE(listview->currentItem(), findItem<QDeclarativeItem>(contentItem, "wrapper", 0));
-    QTRY_COMPARE(listview->highlightItem()->y(), listview->currentItem()->y());
+    QTRY_COMPARE(listview->highlightItem()->y() - 5, listview->currentItem()->y());
 
     listview->setCurrentIndex(2);
 
     QTRY_COMPARE(listview->currentIndex(), 2);
     QTRY_COMPARE(listview->currentItem(), findItem<QDeclarativeItem>(contentItem, "wrapper", 2));
-    QTRY_COMPARE(listview->highlightItem()->y(), listview->currentItem()->y());
+    QTRY_COMPARE(listview->highlightItem()->y() - 5, listview->currentItem()->y());
+
+    // QTBUG-15972
+    listview->positionViewAtIndex(3, QDeclarativeListView::Contain);
+
+    QTRY_COMPARE(listview->currentIndex(), 2);
+    QTRY_COMPARE(listview->currentItem(), findItem<QDeclarativeItem>(contentItem, "wrapper", 2));
+    QTRY_COMPARE(listview->highlightItem()->y() - 5, listview->currentItem()->y());
+
+    delete canvas;
 }
 
 void tst_QDeclarativeListView::QTBUG_11105()
@@ -1752,6 +1764,8 @@ void tst_QDeclarativeListView::footer()
 
     model.clear();
     QTRY_COMPARE(footer->y(), 0.0);
+
+    delete canvas;
 }
 
 void tst_QDeclarativeListView::resizeView()
@@ -1794,6 +1808,8 @@ void tst_QDeclarativeListView::resizeView()
 
     QMetaObject::invokeMethod(canvas->rootObject(), "heightRatio", Q_RETURN_ARG(QVariant, heightRatio));
     QCOMPARE(heightRatio.toReal(), 0.25);
+
+    delete canvas;
 }
 
 void tst_QDeclarativeListView::sizeLessThan1()
@@ -1849,6 +1865,83 @@ void tst_QDeclarativeListView::QTBUG_14821()
 
     listview->incrementCurrentIndex();
     QCOMPARE(listview->currentIndex(), 0);
+
+    delete canvas;
+}
+
+void tst_QDeclarativeListView::resizeDelegate()
+{
+    QDeclarativeView *canvas = createView();
+
+    QStringList strings;
+    for (int i = 0; i < 30; ++i)
+        strings << QString::number(i);
+    QStringListModel model(strings);
+
+    QDeclarativeContext *ctxt = canvas->rootContext();
+    ctxt->setContextProperty("testModel", &model);
+
+    canvas->setSource(QUrl::fromLocalFile(SRCDIR "/data/displaylist.qml"));
+    qApp->processEvents();
+
+    QDeclarativeListView *listview = findItem<QDeclarativeListView>(canvas->rootObject(), "list");
+    QTRY_VERIFY(listview != 0);
+
+    QDeclarativeItem *contentItem = listview->contentItem();
+    QTRY_VERIFY(contentItem != 0);
+
+    QTRY_COMPARE(listview->count(), model.rowCount());
+
+    listview->setCurrentIndex(25);
+    listview->setContentY(0);
+
+    for (int i = 0; i < 16; ++i) {
+        QDeclarativeItem *item = findItem<QDeclarativeItem>(contentItem, "wrapper", i);
+        QVERIFY(item != 0);
+        QCOMPARE(item->y(), i*20.0);
+    }
+
+    QCOMPARE(listview->currentItem()->y(), 500.0);
+    QTRY_COMPARE(listview->highlightItem()->y(), 500.0);
+
+    canvas->rootObject()->setProperty("delegateHeight", 30);
+    qApp->processEvents();
+
+    for (int i = 0; i < 11; ++i) {
+        QDeclarativeItem *item = findItem<QDeclarativeItem>(contentItem, "wrapper", i);
+        QVERIFY(item != 0);
+        QTRY_COMPARE(item->y(), i*30.0);
+    }
+
+    QTRY_COMPARE(listview->currentItem()->y(), 750.0);
+    QTRY_COMPARE(listview->highlightItem()->y(), 750.0);
+
+    listview->setCurrentIndex(1);
+    listview->positionViewAtIndex(25, QDeclarativeListView::Beginning);
+    listview->positionViewAtIndex(5, QDeclarativeListView::Beginning);
+
+    for (int i = 5; i < 16; ++i) {
+        QDeclarativeItem *item = findItem<QDeclarativeItem>(contentItem, "wrapper", i);
+        QVERIFY(item != 0);
+        QCOMPARE(item->y(), i*30.0);
+    }
+
+    QTRY_COMPARE(listview->currentItem()->y(), 30.0);
+    QTRY_COMPARE(listview->highlightItem()->y(), 30.0);
+
+    canvas->rootObject()->setProperty("delegateHeight", 20);
+    qApp->processEvents();
+
+    for (int i = 5; i < 11; ++i) {
+        QDeclarativeItem *item = findItem<QDeclarativeItem>(contentItem, "wrapper", i);
+        QVERIFY(item != 0);
+        QTRY_COMPARE(item->y(), 150 + (i-5)*20.0);
+    }
+
+    QTRY_COMPARE(listview->currentItem()->y(), 70.0);
+    QTRY_COMPARE(listview->highlightItem()->y(), 70.0);
+
+    delete canvas;
 }
 
 void tst_QDeclarativeListView::qListModelInterface_items()
diff --git a/tests/auto/declarative/qdeclarativepathview/tst_qdeclarativepathview.cpp b/tests/auto/declarative/qdeclarativepathview/tst_qdeclarativepathview.cpp
index a2a5363..9193707 100644
--- a/tests/auto/declarative/qdeclarativepathview/tst_qdeclarativepathview.cpp
+++ b/tests/auto/declarative/qdeclarativepathview/tst_qdeclarativepathview.cpp
@@ -429,6 +429,10 @@ void tst_QDeclarativePathView::dataModel()
     pathview->setOffset(0);
     QCOMPARE(findItems<QDeclarativeItem>(pathview, "wrapper").count(), 5);
 
+    pathview->setCurrentIndex(model.count()-1);
+    model.removeItem(model.count()-1);
+    QCOMPARE(pathview->currentIndex(), model.count()-1);
+
     delete canvas;
 }
 
diff --git a/tools/qml/browser/Browser.qml b/tools/qml/browser/Browser.qml
index b9573da..968d077 100644
--- a/tools/qml/browser/Browser.qml
+++ b/tools/qml/browser/Browser.qml
@@ -173,7 +173,7 @@ Rectangle {
         width: parent.width
         model: folders1
         delegate: folderDelegate
-        highlight: Rectangle { 
+        highlight: Rectangle {
             color: palette.highlight
             visible: root.showFocusHighlight && view1.count != 0
             gradient: Gradient {
diff --git a/tools/qml/deviceorientation.h b/tools/qml/deviceorientation.h
index 487ebd4..88ceb1b 100644
--- a/tools/qml/deviceorientation.h
+++ b/tools/qml/deviceorientation.h
@@ -52,8 +52,8 @@ class DeviceOrientation : public QObject
     Q_OBJECT
     Q_ENUMS(Orientation)
 public:
-    enum Orientation { 
-        UnknownOrientation, 
+    enum Orientation {
+        UnknownOrientation,
         Portrait,
         Landscape,
         PortraitInverted,
diff --git a/tools/qml/main.cpp b/tools/qml/main.cpp
index 209c72f..104f7b7 100644
--- a/tools/qml/main.cpp
+++ b/tools/qml/main.cpp
@@ -86,14 +86,16 @@ void myMessageOutput(QtMsgType type, const char *msg)
 QWeakPointer<LoggerWidget> logger;
 
 QString warnings;
-void showWarnings()
+void exitApp(int i)
 {
+#ifdef Q_OS_WIN
+    // Debugging output is not visible by default on Windows -
+    // therefore show modal dialog with errors instead.
     if (!warnings.isEmpty()) {
-        int argc = 0; char **argv = 0;
-        QApplication application(argc, argv); // QApplication() in main has been destroyed already.
-        Q_UNUSED(application)
         QMessageBox::warning(0, QApplication::tr("Qt QML Viewer"), warnings);
     }
+#endif
+    exit(i);
 }
 
 static QAtomicInt recursiveLock(0);
@@ -102,14 +104,16 @@ void myMessageOutput(QtMsgType type, const char *msg)
 {
     QString strMsg = QString::fromLatin1(msg);
 
-    if (!logger.isNull() && !QCoreApplication::closingDown()) {
-        if (recursiveLock.testAndSetOrdered(0, 1)) {
-            QMetaObject::invokeMethod(logger.data(), "append", Q_ARG(QString, strMsg));
-            recursiveLock = 0;
+    if (!QCoreApplication::closingDown()) {
+        if (!logger.isNull()) {
+            if (recursiveLock.testAndSetOrdered(0, 1)) {
+                QMetaObject::invokeMethod(logger.data(), "append", Q_ARG(QString, strMsg));
+                recursiveLock = 0;
+            }
+        } else {
+            warnings += strMsg;
+            warnings += QLatin1Char('\n');
         }
-    } else {
-        warnings += strMsg;
-        warnings += QLatin1Char('\n');
     }
     if (systemMsgOutput) { // Windows
         systemMsgOutput(type, msg);
@@ -165,7 +169,8 @@ void usage()
 
     qWarning(" ");
     qWarning(" Press F1 for interactive help");
-    exit(1);
+
+    exitApp(1);
 }
 
 void scriptOptsUsage()
@@ -184,7 +189,8 @@ void scriptOptsUsage()
     qWarning("  saveonexit ............................... save recording on viewer exit");
     qWarning(" ");
     qWarning(" One of record, play or both must be specified.");
-    exit(1);
+
+    exitApp(1);
 }
 
 enum WarningsConfig { ShowWarnings, HideWarnings, DefaultWarnings };
@@ -370,7 +376,7 @@ static void parseCommandLineOptions(const QStringList &arguments)
             qApp->setStartDragDistance(arguments.at(++i).toInt());
         } else if (arg == QLatin1String("-v") || arg == QLatin1String("-version")) {
             qWarning("Qt QML Viewer version %s", QT_VERSION_STR);
-            exit(0);
+            exitApp(0);
         } else if (arg == "-translation") {
             if (lastArg) usage();
             opts.translationFile = arguments.at(++i);
@@ -400,7 +406,7 @@ static void parseCommandLineOptions(const QStringList &arguments)
                 QDeclarativeEngine tmpEngine;
                 QString paths = tmpEngine.importPathList().join(QLatin1String(":"));
                 qWarning("Current search path: %s", paths.toLocal8Bit().constData());
-                exit(0);
+                exitApp(0);
             }
             opts.imports << arguments.at(++i);
         } else if (arg == "-P") {
@@ -529,12 +535,6 @@ int main(int argc, char ** argv)
     systemMsgOutput = qInstallMsgHandler(myMessageOutput);
 #endif
 
-#if defined (Q_OS_WIN)
-    // Debugging output is not visible by default on Windows -
-    // therefore show modal dialog with errors instead.
-    atexit(showWarnings);
-#endif
-
 #if defined (Q_WS_X11) || defined (Q_WS_MAC)
     //### default to using raster graphics backend for now
     bool gsSpecified = false;
diff --git a/tools/qml/qdeclarativetester.cpp b/tools/qml/qdeclarativetester.cpp
index e3a1f59..1bcdb04 100644
--- a/tools/qml/qdeclarativetester.cpp
+++ b/tools/qml/qdeclarativetester.cpp
@@ -54,9 +54,9 @@ QT_BEGIN_NAMESPACE
 
 extern Q_GUI_EXPORT bool qt_applefontsmoothing_enabled;
 
-QDeclarativeTester::QDeclarativeTester(const QString &script, QDeclarativeViewer::ScriptOptions opts, 
+QDeclarativeTester::QDeclarativeTester(const QString &script, QDeclarativeViewer::ScriptOptions opts,
                      QDeclarativeView *parent)
-: QAbstractAnimation(parent), m_script(script), m_view(parent), filterEvents(true), options(opts), 
+: QAbstractAnimation(parent), m_script(script), m_view(parent), filterEvents(true), options(opts),
   testscript(0), hasCompleted(false), hasFailed(false)
 {
     parent->viewport()->installEventFilter(this);
@@ -75,8 +75,8 @@ QDeclarativeTester::QDeclarativeTester(const QString &script, QDeclarativeViewer
 
 QDeclarativeTester::~QDeclarativeTester()
 {
-    if (!hasFailed && 
-        options & QDeclarativeViewer::Record && 
+    if (!hasFailed &&
+        options & QDeclarativeViewer::Record &&
         options & QDeclarativeViewer::SaveOnExit)
         save();
 }
@@ -228,7 +228,7 @@ void QDeclarativeTester::save()
         }
         ts << "    }\n";
 
-        while (!mouseevents.isEmpty() && 
+        while (!mouseevents.isEmpty() &&
                mouseevents.first().msec == fe.msec) {
             MouseEvent me = mouseevents.takeFirst();
 
@@ -345,7 +345,7 @@ void QDeclarativeTester::updateCurrentTime(int msec)
         if (QDeclarativeVisualTestFrame *frame = qobject_cast<QDeclarativeVisualTestFrame *>(event)) {
             if (frame->msec() < msec) {
                 if (options & QDeclarativeViewer::TestImages && !(options & QDeclarativeViewer::Record)) {
-                    qWarning() << "QDeclarativeTester(" << m_script << "): Extra frame.  Seen:" 
+                    qWarning() << "QDeclarativeTester(" << m_script << "): Extra frame.  Seen:"
                                << msec << "Expected:" << frame->msec();
                     imagefailure();
                 }
@@ -371,7 +371,7 @@ void QDeclarativeTester::updateCurrentTime(int msec)
                 }
                 if (goodImage != img) {
                     QString reject(frame->image().toLocalFile() + ".reject.png");
-                    qWarning() << "QDeclarativeTester(" << m_script << "): Image mismatch.  Reject saved to:" 
+                    qWarning() << "QDeclarativeTester(" << m_script << "): Image mismatch.  Reject saved to:"
                                << reject;
                     img.save(reject);
                     bool doDiff = (goodImage.size() == img.size());
@@ -424,7 +424,7 @@ void QDeclarativeTester::updateCurrentTime(int msec)
                 ke.destination = ViewPort;
             }
             m_savedKeyEvents.append(ke);
-        } 
+        }
         testscriptidx++;
     }
 
diff --git a/tools/qml/qdeclarativetester.h b/tools/qml/qdeclarativetester.h
index 0cf508a..6fdf495 100644
--- a/tools/qml/qdeclarativetester.h
+++ b/tools/qml/qdeclarativetester.h
@@ -122,7 +122,7 @@ public:
 
     int type() const { return m_type; }
     void setType(int t) { m_type = t; }
-    
+
     int button() const { return m_button; }
     void setButton(int b) { m_button = b; }
 
@@ -237,7 +237,7 @@ private:
 
     struct MouseEvent {
         MouseEvent(QMouseEvent *e)
-            : type(e->type()), button(e->button()), buttons(e->buttons()), 
+            : type(e->type()), button(e->button()), buttons(e->buttons()),
               pos(e->pos()), modifiers(e->modifiers()), destination(View) {}
 
         QEvent::Type type;
diff --git a/tools/qml/qml.pro b/tools/qml/qml.pro
index 3927dd6..bdac6e3 100644
--- a/tools/qml/qml.pro
+++ b/tools/qml/qml.pro
@@ -4,7 +4,7 @@ DESTDIR = ../../bin
 
 include(qml.pri)
 
-SOURCES += main.cpp 
+SOURCES += main.cpp
 
 INCLUDEPATH += ../../include/QtDeclarative
 INCLUDEPATH += ../../src/declarative/util
@@ -26,7 +26,7 @@ wince* {
         QT += xmlpatterns
     }
     contains(QT_CONFIG, webkit) {
-        QT += webkit 
+        QT += webkit
     }
 }
 maemo5 {
diff --git a/tools/qml/qmlruntime.cpp b/tools/qml/qmlruntime.cpp
index a368bc1..142e4c5 100644
--- a/tools/qml/qmlruntime.cpp
+++ b/tools/qml/qmlruntime.cpp
@@ -820,7 +820,7 @@ void QDeclarativeViewer::createMenu()
     fileMenu->addAction(reloadAction);
     fileMenu->addSeparator();
     fileMenu->addAction(closeAction);
-#if !defined(Q_OS_SYMBIAN)    
+#if !defined(Q_OS_SYMBIAN)
     fileMenu->addAction(quitAction);
 
     QMenu *recordMenu = menu->addMenu(tr("&Recording"));
@@ -836,7 +836,7 @@ void QDeclarativeViewer::createMenu()
     settingsMenu->addAction(proxyAction);
 #if defined(Q_OS_SYMBIAN)
     settingsMenu->addAction(fullscreenAction);
-#else 
+#else
     settingsMenu->addAction(recordOptions);
     settingsMenu->addMenu(loggerWindow->preferencesMenu());
 #endif // !Q_OS_SYMBIAN
diff --git a/tools/qml/startup/startup.qml b/tools/qml/startup/startup.qml
index 9ca50a3..35c44c2 100644
--- a/tools/qml/startup/startup.qml
+++ b/tools/qml/startup/startup.qml
@@ -92,8 +92,8 @@ Rectangle {
                     to: 360
                     loops: NumberAnimation.Infinite
                     running: true
-                    duration: 2000                
-                }   
+                    duration: 2000
+                }
             }
         }
     }
@@ -168,6 +168,6 @@ Rectangle {
                 }
             }
         }
-    ]   
+    ]
 
 } // treatsApp