Doc: Fixing typo

20 files changed, 29 insertions, 29 deletions

diff --git a/src/multimedia/audio/qaudiooutput_win32_p.cpp b/src/multimedia/audio/qaudiooutput_win32_p.cpp
index 1f304e3..1b054e5 100644
--- a/src/multimedia/audio/qaudiooutput_win32_p.cpp
+++ b/src/multimedia/audio/qaudiooutput_win32_p.cpp
@@ -586,7 +586,7 @@ bool QAudioOutputPrivate::deviceReady()
                 }
             }
             if ( out < l) {
-                // Didnt write all data
+                // Didn't write all data
                 audioSource->seek(audioSource->pos()-(l-out));
             }
 	    if(startup)
diff --git a/src/opengl/gl2paintengineex/qglengineshadermanager_p.h b/src/opengl/gl2paintengineex/qglengineshadermanager_p.h
index 92cf108..536b44a 100644
--- a/src/opengl/gl2paintengineex/qglengineshadermanager_p.h
+++ b/src/opengl/gl2paintengineex/qglengineshadermanager_p.h
@@ -72,7 +72,7 @@
     The position shaders for brushes look scary. This is because many of the
     calculations which logically belong in the fragment shader have been moved
     into the vertex shader to improve performance. This is why the position
-    calculation is in a seperate shader. Not only does it calculate the
+    calculation is in a separate shader. Not only does it calculate the
     position, but it also calculates some data to be passed to the fragment
     shader as a varying. It is optimal to move as much of the calculation as
     possible into the vertex shader as this is executed less often.
diff --git a/src/opengl/qgl_egl.cpp b/src/opengl/qgl_egl.cpp
index 27f7ad9..8902099 100644
--- a/src/opengl/qgl_egl.cpp
+++ b/src/opengl/qgl_egl.cpp
@@ -88,7 +88,7 @@ void qt_eglproperties_set_glformat(QEglProperties& eglProperties, const QGLForma
     // put in the list before 32-bit configs. So, to make sure 16-bit is preffered over 32-bit,
     // we must set the red/green/blue sizes to zero. This has an unfortunate consequence that
     // if the application sets the red/green/blue size to 5/6/5 on the QGLFormat, they will
-    // probably get a 32-bit config, even when there's an RGB565 config avaliable. Oh well.
+    // probably get a 32-bit config, even when there's an RGB565 config available. Oh well.
 
     // Now normalize the values so -1 becomes 0
     redSize   = redSize   > 0 ? redSize   : 0;
diff --git a/src/opengl/qgl_x11egl.cpp b/src/opengl/qgl_x11egl.cpp
index 9d28de0..d33ea56 100644
--- a/src/opengl/qgl_x11egl.cpp
+++ b/src/opengl/qgl_x11egl.cpp
@@ -377,7 +377,7 @@ QGLTexture *QGLContextPrivate::bindTextureFromNativePixmap(QPixmap *pixmap, cons
         checkedForEglImageTFP = true;
 
         // We need to be able to create an EGLImage from a native pixmap, which was split
-        // into a seperate EGL extension, EGL_KHR_image_pixmap. It is possible to have
+        // into a separate EGL extension, EGL_KHR_image_pixmap. It is possible to have
         // eglCreateImageKHR & eglDestroyImageKHR without support for pixmaps, so we must
         // check we have the EGLImage from pixmap functionality.
         if (QEgl::hasExtension("EGL_KHR_image") || QEgl::hasExtension("EGL_KHR_image_pixmap")) {
diff --git a/src/opengl/qpixmapdata_x11gl_egl.cpp b/src/opengl/qpixmapdata_x11gl_egl.cpp
index 2c11a0b..5cbc836 100644
--- a/src/opengl/qpixmapdata_x11gl_egl.cpp
+++ b/src/opengl/qpixmapdata_x11gl_egl.cpp
@@ -93,7 +93,7 @@ public:
             if (rgbConfig == argbConfig)
                 argbContext = rgbContext;
 
-            // Otherwise, create a seperate context to be used for ARGB pixmaps:
+            // Otherwise, create a separate context to be used for ARGB pixmaps:
             if (!argbContext) {
                 argbContext = new QEglContext;
                 argbContext->setConfig(argbConfig);
@@ -314,7 +314,7 @@ QPaintEngine* QX11GLPixmapData::paintEngine() const
         Q_ASSERT(ctx->d_func()->eglContext == 0);
         ctx->d_func()->eglContext = hasAlphaChannel() ? sharedContexts()->argbContext : sharedContexts()->rgbContext;
 
-        // While we use a seperate QGLContext for each pixmap, the underlying QEglContext is
+        // While we use a separate QGLContext for each pixmap, the underlying QEglContext is
         // the same. So we must use a "fake" QGLContext and fool the texture cache into thinking
         // each pixmap's QGLContext is sharing with this central one. The only place this is
         // going to fail is where we the underlying EGL RGB and ARGB contexts aren't sharing.
diff --git a/src/plugins/bearer/symbian/qnetworksession_impl.cpp b/src/plugins/bearer/symbian/qnetworksession_impl.cpp
index 85723ce..c5a39e1 100644
--- a/src/plugins/bearer/symbian/qnetworksession_impl.cpp
+++ b/src/plugins/bearer/symbian/qnetworksession_impl.cpp
@@ -1078,7 +1078,7 @@ void QNetworkSessionPrivateImpl::RunL()
             TInt error = KErrNone;
             QNetworkConfiguration newActiveConfig = activeConfiguration();
             if (!newActiveConfig.isValid()) {
-                // RConnection startup was successfull but no configuration
+                // RConnection startup was successful but no configuration
                 // was found. That indicates that user has chosen to create a
                 // new WLAN configuration (from scan results), but that new
                 // configuration does not have access to Internet (Internet
diff --git a/src/plugins/graphicssystems/meego/qmeegographicssystem.cpp b/src/plugins/graphicssystems/meego/qmeegographicssystem.cpp
index a633e2f..073d722 100644
--- a/src/plugins/graphicssystems/meego/qmeegographicssystem.cpp
+++ b/src/plugins/graphicssystems/meego/qmeegographicssystem.cpp
@@ -83,7 +83,7 @@ QWindowSurface* QMeeGoGraphicsSystem::createWindowSurface(QWidget *widget) const
 QPixmapData *QMeeGoGraphicsSystem::createPixmapData(QPixmapData::PixelType type) const
 {
     // Long story short: without this it's possible to hit an 
-    // unitialized paintDevice due to a Qt bug too complex to even 
+    // uninitialized paintDevice due to a Qt bug too complex to even 
     // explain here... not to mention fix without going crazy. 
     // MDK
     QGLShareContextScope ctx(qt_gl_share_widget()->context());
@@ -301,4 +301,4 @@ bool qt_meego_live_texture_release(QPixmap *pixmap, QImage *image)
 Qt::HANDLE qt_meego_live_texture_get_handle(QPixmap *pixmap)
 {
     return QMeeGoGraphicsSystem::getLiveTextureHandle(pixmap);
-}
\ No newline at end of file
+}
diff --git a/src/qt3support/canvas/q3canvas.cpp b/src/qt3support/canvas/q3canvas.cpp
index 959c435..1b4706d 100644
--- a/src/qt3support/canvas/q3canvas.cpp
+++ b/src/qt3support/canvas/q3canvas.cpp
@@ -1030,7 +1030,7 @@ void Q3Canvas::setUpdatePeriod(int ms)
 
     The advance takes place in two phases. In phase 0, the
     Q3CanvasItem::advance() function of each Q3CanvasItem::animated()
-    canvas item is called with paramater 0. Then all these canvas
+    canvas item is called with parameter 0. Then all these canvas
     items are called again, with parameter 1. In phase 0, the canvas
     items should not change position, merely examine other items on
     the canvas for which special processing is required, such as
diff --git a/src/qt3support/text/q3richtext.cpp b/src/qt3support/text/q3richtext.cpp
index d82d0f0..e24eeb5 100644
--- a/src/qt3support/text/q3richtext.cpp
+++ b/src/qt3support/text/q3richtext.cpp
@@ -2914,7 +2914,7 @@ QString Q3TextDocument::selectedText(int id, bool asRichText) const
         }
     }
     // ### workaround for plain text export until we get proper
-    // mime types: turn unicode line seperators into the more
+    // mime types: turn unicode line separators into the more
     // widely understood \n. Makes copy and pasting code snipplets
     // from within Assistent possible
     QChar* uc = (QChar*) s.unicode();
diff --git a/src/scripttools/debugging/qscriptdebuggeragent.cpp b/src/scripttools/debugging/qscriptdebuggeragent.cpp
index 551f6c3..9362639 100644
--- a/src/scripttools/debugging/qscriptdebuggeragent.cpp
+++ b/src/scripttools/debugging/qscriptdebuggeragent.cpp
@@ -116,7 +116,7 @@ QScriptDebuggerAgent::~QScriptDebuggerAgent()
 /*!
   Instructs the agent to perform a "step into" operation.  This
   function returns immediately. The agent will report step completion
-  at a later time, i.e. when script statements are evaluted.
+  at a later time, i.e. when script statements are evaluated.
 */
 void QScriptDebuggerAgent::enterStepIntoMode(int count)
 {
@@ -129,7 +129,7 @@ void QScriptDebuggerAgent::enterStepIntoMode(int count)
 /*!
   Instructs the agent to perform a "step over" operation.  This
   function returns immediately. The agent will report step completion
-  at a later time, i.e. when script statements are evaluted.
+  at a later time, i.e. when script statements are evaluated.
 */
 void QScriptDebuggerAgent::enterStepOverMode(int count)
 {
@@ -146,7 +146,7 @@ void QScriptDebuggerAgent::enterStepOverMode(int count)
 /*!
   Instructs the agent to perform a "step out" operation.  This
   function returns immediately. The agent will report step completion
-  at a later time, i.e. when script statements are evaluted.
+  at a later time, i.e. when script statements are evaluated.
 */
 void QScriptDebuggerAgent::enterStepOutMode()
 {
diff --git a/src/xmlpatterns/data/qabstractfloat.cpp b/src/xmlpatterns/data/qabstractfloat.cpp
index d3384fe..9f0e4e0 100644
--- a/src/xmlpatterns/data/qabstractfloat.cpp
+++ b/src/xmlpatterns/data/qabstractfloat.cpp
@@ -118,7 +118,7 @@ bool AbstractFloat<isDouble>::isEqual(const xsDouble a, const xsDouble b)
         return qIsInf(a) && internalSignbit(a) == internalSignbit(b);
     else
     {
-        /* Preferrably, we would use std::numeric_limits<xsDouble>::espilon(), but
+        /* Preferably, we would use std::numeric_limits<xsDouble>::espilon(), but
          * we cannot since we cannot depend on the STL. The small xs:double value below,
          * was extracted by printing the std::numeric_limits<xsDouble>::epsilon() using
          * gdb. */
diff --git a/src/xmlpatterns/data/qatomicvalue.cpp b/src/xmlpatterns/data/qatomicvalue.cpp
index c4f3578..ecc78bf 100644
--- a/src/xmlpatterns/data/qatomicvalue.cpp
+++ b/src/xmlpatterns/data/qatomicvalue.cpp
@@ -65,7 +65,7 @@ QT_BEGIN_NAMESPACE
 
 /**
  * @file
- * @short Contains the implementation for AtomicValue. The defintion is in qitem_p.h.
+ * @short Contains the implementation for AtomicValue. The definition is in qitem_p.h.
  */
 
 using namespace QPatternist;
diff --git a/src/xmlpatterns/data/qschematime_p.h b/src/xmlpatterns/data/qschematime_p.h
index bd63714..bff065b 100644
--- a/src/xmlpatterns/data/qschematime_p.h
+++ b/src/xmlpatterns/data/qschematime_p.h
@@ -63,7 +63,7 @@ namespace QPatternist
     /**
      * @short Implements the value instance of the @c xs:time type.
      *
-     * The header file for this class was orignally called Time.h, but this
+     * The header file for this class was originally called Time.h, but this
      * clashed with a system header on MinGW.
      *
      * @author Frans Englich <frans.englich@nokia.com>
diff --git a/src/xmlpatterns/schema/qxsdschemaparser.cpp b/src/xmlpatterns/schema/qxsdschemaparser.cpp
index fd0b95c..585cf12 100644
--- a/src/xmlpatterns/schema/qxsdschemaparser.cpp
+++ b/src/xmlpatterns/schema/qxsdschemaparser.cpp
@@ -914,7 +914,7 @@ void XsdSchemaParser::parseRedefine()
                 redefinedType->setWxsSuperType(contextType);
 
                 // 3) remove the base type resolving job from the resolver as
-                //    we have set the base type here explicitely
+                //    we have set the base type here explicitly
                 m_parserContext->resolver()->removeSimpleRestrictionBase(redefinedType);
 
                 // 4) add the redefined type to the schema
@@ -963,7 +963,7 @@ void XsdSchemaParser::parseRedefine()
                 redefinedType->setWxsSuperType(contextType);
 
                 // 3) remove the base type resolving job from the resolver as
-                //    we have set the base type here explicitely
+                //    we have set the base type here explicitly
                 m_parserContext->resolver()->removeComplexBaseType(redefinedType);
 
                 // 4) add the redefined type to the schema
@@ -5781,7 +5781,7 @@ QString XsdSchemaParser::readNamespaceAttribute(const QString &attributeName, co
 
 SchemaType::DerivationConstraints XsdSchemaParser::readDerivationConstraintAttribute(const SchemaType::DerivationConstraints &allowedConstraints, const char *elementName)
 {
-    // first convert the flags into strings for easier comparision
+    // first convert the flags into strings for easier comparison
     QSet<QString> allowedContent;
     if (allowedConstraints & SchemaType::RestrictionConstraint)
         allowedContent.insert(QString::fromLatin1("restriction"));
@@ -5844,7 +5844,7 @@ SchemaType::DerivationConstraints XsdSchemaParser::readDerivationConstraintAttri
 
 NamedSchemaComponent::BlockingConstraints XsdSchemaParser::readBlockingConstraintAttribute(const NamedSchemaComponent::BlockingConstraints &allowedConstraints, const char *elementName)
 {
-    // first convert the flags into strings for easier comparision
+    // first convert the flags into strings for easier comparison
     QSet<QString> allowedContent;
     if (allowedConstraints & NamedSchemaComponent::RestrictionConstraint)
         allowedContent.insert(QString::fromLatin1("restriction"));
diff --git a/src/xmlpatterns/schema/qxsdschemaparser_setup.cpp b/src/xmlpatterns/schema/qxsdschemaparser_setup.cpp
index 88e5f93..dc4730e 100644
--- a/src/xmlpatterns/schema/qxsdschemaparser_setup.cpp
+++ b/src/xmlpatterns/schema/qxsdschemaparser_setup.cpp
@@ -53,7 +53,7 @@ using namespace QPatternist;
  * This page describes how to use DFAs for validating that the XML child tags of an
  * XML parent tag occur in the right order.
  *
- * To validate the occurence of XML tags one need a regular expression that describes
+ * To validate the occurrence of XML tags one need a regular expression that describes
  * which tags can appear how often in what context. For example the regular expression
  * of the global <em>attribute</em> tag in XML Schema is (annotation?, simpleType?).
  * That means the <em>attribute</em> tag can contain an <em>annotation</em> tag followed
diff --git a/src/xmlpatterns/schema/qxsdstatemachine_p.h b/src/xmlpatterns/schema/qxsdstatemachine_p.h
index 294eb50..62c6ab0 100644
--- a/src/xmlpatterns/schema/qxsdstatemachine_p.h
+++ b/src/xmlpatterns/schema/qxsdstatemachine_p.h
@@ -138,7 +138,7 @@ namespace QPatternist
             /**
              * Continues execution of the machine with the given input @p transition.
              *
-             * @return @c true if the transition was successfull, @c false otherwise.
+             * @return @c true if the transition was successful, @c false otherwise.
              */
             bool proceed(TransitionType transition);
 
@@ -154,7 +154,7 @@ namespace QPatternist
              * @note To use this method, inputEqualsTransition must be implemented
              *       to find the right transition to use.
              *
-             * @return @c true if the transition was successfull, @c false otherwise.
+             * @return @c true if the transition was successful, @c false otherwise.
              */
             template <typename InputType>
             bool proceed(InputType input);
diff --git a/src/xmlpatterns/type/qtypechecker.cpp b/src/xmlpatterns/type/qtypechecker.cpp
index 879fe0e..73f83b7 100644
--- a/src/xmlpatterns/type/qtypechecker.cpp
+++ b/src/xmlpatterns/type/qtypechecker.cpp
@@ -168,7 +168,7 @@ Expression::Ptr TypeChecker::verifyType(const Expression::Ptr &operand,
 
     /* Since we haven't exited yet, it means that the operandType is a super type
      * of reqType, and that there hence is a path down to it through the
-     * type hierachy -- but that doesn't neccessarily mean that a up-cast(down the
+     * type hierachy -- but that doesn't necessarily mean that a up-cast(down the
      * hierarchy) would succeed. */
 
     Expression::Ptr result(operand);
diff --git a/tools/linguist/linguist/mainwindow.cpp b/tools/linguist/linguist/mainwindow.cpp
index 18baa24..1189b99 100644
--- a/tools/linguist/linguist/mainwindow.cpp
+++ b/tools/linguist/linguist/mainwindow.cpp
@@ -2498,8 +2498,8 @@ void MainWindow::updateDanger(const MultiDataIndex &index, bool verbose)
             }
 
             if (m_ui.actionPlaceMarkerMatches->isChecked()) {
-                // Stores the occurence count of the place markers in the map placeMarkerIndexes.
-                // i.e. the occurence count of %1 is stored at placeMarkerIndexes[1],
+                // Stores the occurrence count of the place markers in the map placeMarkerIndexes.
+                // i.e. the occurrence count of %1 is stored at placeMarkerIndexes[1],
                 // count of %2 is stored at placeMarkerIndexes[2] etc.
                 // In the first pass, it counts all place markers in the sourcetext.
                 // In the second pass it (de)counts all place markers in the translation.
diff --git a/tools/linguist/linguist/printout.cpp b/tools/linguist/linguist/printout.cpp
index 581dc00..7ec6875 100644
--- a/tools/linguist/linguist/printout.cpp
+++ b/tools/linguist/linguist/printout.cpp
@@ -130,7 +130,7 @@ void PrintOut::addBox(int percent, const QString &text, Style style, Qt::Alignme
     cp.rect.setSize(QSize(cp.rect.width() + wd, qMax(cp.rect.height(), ht)));
 }
 
-// use init if inital vsize should be calculated (first breakPage call)
+// use init if initial vsize should be calculated (first breakPage call)
 void PrintOut::breakPage(bool init)
 {
     static const int LeftAlign = Qt::AlignLeft | Qt::AlignTop;
diff --git a/tools/qdoc3/tokenizer.h b/tools/qdoc3/tokenizer.h
index af617f1..1b33f6f 100644
--- a/tools/qdoc3/tokenizer.h
+++ b/tools/qdoc3/tokenizer.h
@@ -145,7 +145,7 @@ class Tokenizer
         int ch = getch();
         if (ch == EOF)
             return EOF;
-        // cast explicitily to make sure the value of ch 
+        // cast explicitly to make sure the value of ch 
         // is in range [0..255] to avoid assert messages 
         // when using debug CRT that checks its input.
         return int(uint(uchar(ch)));