Allow building Qt without the QtGui module

This adds a -no-gui switch to configure, allowing to build Qt without
QtGui and components depending on QtGui.

This is useful on headless servers, and in using QtCore, QtNetwork,
QtXml, QtSql etc. on platforms QtGui hasn't been ported to yet.

Task-number: QTBUG-4007

Merge-request: 543
Reviewed-by: Thiago Macieira <thiago.macieira@nokia.com>
Reviewed-by: Benjamin Poulain <benjamin.poulain@nokia.com>

1 files changed, 126 insertions, 26 deletions

diff --git a/configure b/configure
index 0dbf98f..9f63aab 100755
--- a/configure
+++ b/configure
@@ -630,6 +630,7 @@ MIN_DBUS_1_VERSION=0.93
 CFG_CONFIGURE_EXIT_ON_ERROR=yes
 CFG_PROFILE=no
 CFG_EXCEPTIONS=unspecified
+CFG_GUI=auto # (yes|no|auto)
 CFG_SCRIPT=auto # (yes|no|auto)
 CFG_SCRIPTTOOLS=auto # (yes|no|auto)
 CFG_XMLPATTERNS=auto # (yes|no|auto)
@@ -680,10 +681,10 @@ CFG_NOBUILD_PARTS=""
 CFG_RELEASE_QMAKE=no
 CFG_PHONON=auto
 CFG_PHONON_BACKEND=yes
-CFG_MULTIMEDIA=yes
-CFG_MEDIASERVICE=yes
+CFG_MULTIMEDIA=auto
+CFG_MEDIASERVICE=auto
 CFG_AUDIO_BACKEND=auto
-CFG_SVG=yes
+CFG_SVG=auto
 CFG_DECLARATIVE=auto
 CFG_WEBKIT=auto # (yes|no|auto)
 CFG_JAVASCRIPTCORE_JIT=auto
@@ -1813,6 +1814,17 @@ while [ "$#" -gt 0 ]; do
             UNKNOWN_OPT=yes
         fi
         ;;
+    gui)
+        if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ]; then
+            CFG_GUI="yes"
+        else
+            if [ "$VAL" = "no" ]; then
+                CFG_GUI="no"
+            else
+                UNKNOWN_OPT=yes
+            fi
+        fi
+        ;;
     qdbus|dbus)
         if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "linked" ]; then
             CFG_DBUS="$VAL"
@@ -2170,6 +2182,10 @@ if [ "$CFG_QCONFIG" != "full" ] && [ "$CFG_QT3SUPPORT" = "yes" ]; then
     echo "Warning: '-qconfig $CFG_QCONFIG' will disable the qt3support library."
     CFG_QT3SUPPORT="no"
 fi
+if [ "$CFG_GUI" = "no" ]; then
+    echo "Warning: -no-gui will disable the qt3support library."
+    CFG_QT3SUPPORT="no"
+fi
 
 # update QT_CONFIG to show our current predefined configuration
 case "$CFG_QCONFIG" in
@@ -3359,7 +3375,7 @@ Usage:  $relconf [-h] [-prefix <dir>] [-prefix-install] [-bindir <dir>] [-libdir
         [-system-libmng] [-no-libjpeg] [-qt-libjpeg] [-system-libjpeg] [-make <part>]
         [-nomake <part>] [-R <string>]  [-l <string>] [-no-rpath]  [-rpath] [-continue]
         [-verbose] [-v] [-silent] [-no-nis] [-nis] [-no-cups] [-cups] [-no-iconv]
-        [-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked]
+        [-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked] [-no-gui]
         [-no-separate-debug-info] [-no-mmx] [-no-3dnow] [-no-sse] [-no-sse2]
         [-qtnamespace <namespace>] [-qtlibinfix <infix>] [-separate-debug-info] [-armfpa]
         [-no-optimized-qmake] [-optimized-qmake] [-no-xmlpatterns] [-xmlpatterns]
@@ -3629,6 +3645,8 @@ Additional options:
  *  -no-optimized-qmake ... Do not build qmake optimized.
     -optimized-qmake ...... Build qmake optimized.
 
+    -no-gui ............ Don't build the Qt GUI library
+
  $NSN  -no-nis ............ Do not compile NIS support.
  $NSY  -nis ............... Compile NIS support.
 
@@ -5074,6 +5092,15 @@ if [ "$CFG_DBUS" != "no" ]; then
     fi
 fi
 
+if [ "$CFG_MULTIMEDIA" = "auto" ]; then
+    CFG_MULTIMEDIA="$CFG_GUI"
+fi
+
+if [ "$CFG_MULTIMEDIA" = "yes" ] && [ "$CFG_GUI" = "no" ]; then
+    echo "QtMultimedia requested, but it can't be built without QtGui"
+    exit 1
+fi
+
 # Generate a CRC of the namespace for using in constants for the Carbon port.
 # This should mean that you really *can* load two Qt's and have our custom
 # Carbon events work.
@@ -5126,28 +5153,56 @@ if [ "$PLATFORM_X11" = "yes" -o "$PLATFORM_QWS" = "yes" ]; then
         fi
     fi
 
-    # Auto-detect GStreamer support (needed for both Phonon & QtMultimedia)
-    if [ "$CFG_GLIB" = "yes" -a "$CFG_GSTREAMER" != "no" ]; then
-        if [ -n "$PKG_CONFIG" ]; then
-            QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
-            QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
+    if [ "$CFG_GUI" = "no" ]; then
+        if [ "$CFG_PHONON" = "auto" ]; then
+            CFG_PHONON=no
         fi
-        if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/gstreamer "GStreamer" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER $X11TESTS_FLAGS; then
-            CFG_GSTREAMER=yes
-            QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER"
-            QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER"
-        else
-            if [ "$CFG_GSTREAMER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
-                echo "Gstreamer support cannot be enabled due to functionality tests!"
-                echo " Turn on verbose messaging (-v) to $0 to see the final report."
-                echo " If you believe this message is in error you may use the continue"
-                echo " switch (-continue) to $0 to continue."
-                exit 101
+        if [ "$CFG_PHONON" != "no" ]; then
+            echo "Phonon enabled, but GUI disabled."
+            echo " You might need to either enable the GUI or disable Phonon"
+            exit 1
+        fi
+    fi
+
+    if [ "$CFG_GUI" = "no" ]; then
+        if [ "$CFG_MEDIASERVICE" = "auto" ]; then
+            CFG_MEDIASERVICE=no
+        fi
+        if [ "$CFG_MEDIASERVICE" != "no" ]; then
+            echo "Mediaservice enabled, but GUI disabled."
+            echo " You might need to either enable the GUI or disable Mediaservice"
+            exit 1
+        fi
+    elif [ "$CFG_MEDIASERVICE" = "auto" ]; then
+        CFG_MEDIASERVICE=yes
+    fi
+
+    # Auto-detect GStreamer support (needed for both Phonon & QtMultimedia)
+    if [ "$CFG_PHONON" = "yes" -o "$CFG_MULTIMEDIA" = "yes" ]; then
+        if [ "$CFG_GLIB" = "yes" -a "$CFG_GSTREAMER" != "no" ]; then
+            if [ -n "$PKG_CONFIG" ]; then
+                QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
+                QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null`
+            fi
+            if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/gstreamer "GStreamer" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER $X11TESTS_FLAGS; then
+                CFG_GSTREAMER=yes
+                QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER"
+                QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER"
             else
-                CFG_GSTREAMER=no
+                if [ "$CFG_GSTREAMER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then
+                    echo "Gstreamer support cannot be enabled due to functionality tests!"
+                    echo " Turn on verbose messaging (-v) to $0 to see the final report."
+                    echo " If you believe this message is in error you may use the continue"
+                    echo " switch (-continue) to $0 to continue."
+                    exit 101
+                else
+                    CFG_GSTREAMER=no
+                fi
             fi
+        elif [ "$CFG_GLIB" = "no" ]; then
+            CFG_GSTREAMER=no
         fi
-    elif [ "$CFG_GLIB" = "no" ]; then
+    else
         CFG_GSTREAMER=no
     fi
 
@@ -5251,6 +5306,16 @@ if [ "$PLATFORM_X11" = "yes" ]; then
     fi
 
     # auto-detect OpenGL support (es1 = OpenGL ES 1.x Common, es2 = OpenGL ES 2.x)
+    if [ "$CFG_GUI" = "no" ]; then
+        if [ "$CFG_OPENGL" = "auto" ]; then
+            CFG_OPENGL=no
+        fi
+        if [ "$CFG_OPENGL" != "no" ]; then
+            echo "OpenGL enabled, but GUI disabled."
+            echo " You might need to either enable the GUI or disable OpenGL"
+            exit 1
+        fi
+    fi
     if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then
         if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/opengl "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS $X11TESTS_FLAGS; then
             CFG_OPENGL=desktop
@@ -5616,6 +5681,16 @@ fi
 if [ "$PLATFORM_QWS" = "yes" ]; then
 
     # auto-detect OpenGL support (es1 = OpenGL ES 1.x Common, es2 = OpenGL ES 2.x)
+    if [ "$CFG_GUI" = "no" ]; then
+        if [ "$CFG_OPENGL" = "auto" ]; then
+            CFG_OPENGL=no
+        fi
+        if [ "$CFG_OPENGL" != "no" ]; then
+            echo "OpenGL enabled, but GUI disabled."
+            echo " You might need to either enable the GUI or disable OpenGL"
+            exit 1
+        fi
+    fi
     if [ "$CFG_OPENGL" = "yes" ]; then
         if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS; then
             CFG_OPENGL=es2
@@ -6418,6 +6493,15 @@ elif [ "$CFG_LIBFREETYPE" = "system" ]; then
 else
     QT_CONFIG="$QT_CONFIG freetype"
 fi
+if [ "$CFG_GUI" = "auto" ]; then
+    CFG_GUI="yes"
+fi
+if [ "$CFG_GUI" = "no" ]; then
+    QT_CONFIG="$QT_CONFIG no-gui"
+else
+    QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GUI"
+fi
+
 
 if [ "x$PLATFORM_MAC" = "xyes" ] && [ "$XPLATFORM" != "win32-g++" ]; then
     #On Mac we implicitly link against libz, so we
@@ -6694,6 +6778,12 @@ EOF
 	;;
 esac
 
+if [ "$CFG_GUI" = "no" ]; then
+    # WebKit requires QtGui
+    canBuildWebKit="no"
+fi
+
+
 CFG_CONCURRENT="yes"
 if [ "$canBuildQtConcurrent" = "no" ]; then
     QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CONCURRENT"
@@ -6728,6 +6818,15 @@ if [ "$CFG_AUDIO_BACKEND" = "yes" ]; then
     QT_CONFIG="$QT_CONFIG audio-backend"
 fi
 
+if [ "$CFG_SVG" = "auto" ]; then
+    CFG_SVG=$CFG_GUI
+fi
+
+if [ "$CFG_SVG" = "yes" ] && [ "$CFG_GUI" = "no" ]; then
+    echo "QtSvg requested, but it can't be built without QtGui"
+    exit 1
+fi
+
 if [ "$CFG_SVG" = "yes" ]; then
     QT_CONFIG="$QT_CONFIG svg"
 else
@@ -6775,13 +6874,13 @@ fi
 
 
 if [ "$CFG_DECLARATIVE" = "yes" ]; then
-    if [ "$CFG_SCRIPT" = "no" ]; then
-        echo "Error: QtDeclarative was requested, but it can't be built due to QtScript being disabled."
+    if [ "$CFG_SCRIPT" = "no" -o "$CFG_GUI" = "no" ]; then
+        echo "Error: QtDeclarative was requested, but it can't be built due to QtScript or QtGui being disabled."
         exit 1
     fi
 fi
 if [ "$CFG_DECLARATIVE" = "auto" ]; then
-    if [ "$CFG_SCRIPT" = "no" ]; then
+    if [ "$CFG_SCRIPT" = "no" -o "$CFG_GUI" = "no" ]; then
             CFG_DECLARATIVE=no
     else
             CFG_DECLARATIVE=yes
@@ -6899,7 +6998,7 @@ esac
 #     minimal-config small-config medium-config large-config full-config
 #
 #   Different edition modules:
-#     network canvas table xml opengl sql
+#     gui network canvas table xml opengl sql
 #
 # Things that do not affect the Qt API/ABI:
 #     stl
@@ -7666,6 +7765,7 @@ echo "Qt 3 compatibility ..... $CFG_QT3SUPPORT"
 [ "$CFG_DBUS" = "yes" ]    && echo "QtDBus module .......... yes (run-time)"
 [ "$CFG_DBUS" = "linked" ] && echo "QtDBus module .......... yes (linked)"
 echo "QtConcurrent code ...... $CFG_CONCURRENT"
+echo "QtGui module ........... $CFG_GUI"
 echo "QtScript module ........ $CFG_SCRIPT"
 echo "QtScriptTools module ... $CFG_SCRIPTTOOLS"
 echo "QtXmlPatterns module ... $CFG_XMLPATTERNS"