Merge remote-tracking branch 'origin/master' into HEAD

1 files changed, 53 insertions, 37 deletions

diff --git a/configure b/configure
index cbdb176..031a189 100755
--- a/configure
+++ b/configure
@@ -3716,6 +3716,9 @@ Usage:  $relconf [-h] [-prefix <dir>] [-prefix-install] [-bindir <dir>] [-libdir
 
 Installation options:
 
+    -qpa ................ This will enable the QPA build.
+                          QPA is a window system agnostic implementation of Qt.
+
  These are optional, but you may specify install directories.
 
     -prefix <dir> ...... This will install everything relative to <dir>
@@ -3885,7 +3888,8 @@ fi
                          See the README file for a list of supported
                          operating systems and compilers.
 EOF
-if [ "${PLATFORM_QWS}" != "yes" ]; then
+
+if [ "${PLATFORM_QWS}" != "yes" -a "${PLATFORM_QPA}" != "yes" ]; then
 cat << EOF
     -graphicssystem <sys> Sets an alternate graphics system. Available options are:
                            raster - Software rasterizer
@@ -3894,6 +3898,7 @@ cat << EOF
 
 EOF
 fi
+
 cat << EOF
 
     -no-mmx ............ Do not compile with use of MMX instructions.
@@ -4248,10 +4253,24 @@ Qt/Mac only:
 EOF
 fi
 
-if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" ]; then
+if [ "$PLATFORM_QWS" = "yes" ]; then
     cat << EOF
+Qt for Embedded Linux:
 
-Qt for Embedded Linux only:
+    -embedded <arch> .... This will enable the embedded build, you must have a
+                          proper license for this switch to work.
+                          Example values for <arch>: arm mips x86 generic
+EOF
+fi
+
+if [ "$PLATFORM_QPA" = "yes" ]; then
+    cat << EOF
+Qt for QPA only:
+EOF
+fi
+
+if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" ]; then
+    cat << EOF
 
     -xplatform target ... The target platform when cross-compiling.
 
@@ -4259,14 +4278,6 @@ Qt for Embedded Linux only:
     -feature-<feature> .. Compile in <feature>. The available features
                           are described in src/corelib/global/qfeatures.txt
 
-    -embedded <arch> .... This will enable the embedded build, you must have a
-                          proper license for this switch to work.
-                          Example values for <arch>: arm mips x86 generic
-
-    -qpa <arch> ......... This will enable the QPA build.
-                          Example values for <arch>: arm mips x86 generic
-                          QPA is a window system agnostic implementation of Qt.
-
     -armfpa ............. Target platform uses the ARM-FPA floating point format.
     -no-armfpa .......... Target platform does not use the ARM-FPA floating point format.
 
@@ -4291,6 +4302,17 @@ Qt for Embedded Linux only:
     -qconfig local ...... Use src/corelib/global/qconfig-local.h rather than the
                           default ($CFG_QCONFIG).
 
+    -no-opengl .......... Do not support OpenGL.
+    -opengl <api> ....... Enable OpenGL ES support
+                          With no parameter, this will attempt to auto-detect OpenGL ES 1.x
+                          or 2.x, or regular desktop OpenGL.
+                          Use es1 or es2 for <api> to override auto-detection.
+EOF
+fi
+
+if [ "$PLATFORM_QWS" = "yes" ]; then
+    cat << EOF
+
     -depths <list> ...... Comma-separated list of supported bit-per-pixel
                           depths, from: 1, 4, 8, 12, 15, 16, 18, 24, 32 and 'all'.
 
@@ -4303,14 +4325,6 @@ Qt for Embedded Linux only:
     -no-decoration-<style> ....Disable decoration <style> entirely.
                                Possible values for <style>: [ $CFG_DECORATION_AVAILABLE ]
 
-    -no-opengl .......... Do not support OpenGL.
-    -opengl <api> ....... Enable OpenGL ES support
-                          With no parameter, this will attempt to auto-detect OpenGL ES 1.x
-                          or 2.x. Use es1 or es2 for <api> to override auto-detection.
-
-                          NOTE: A QGLScreen driver for the hardware is required to support
-                                OpenGL ES on Qt for Embedded Linux.
-
     -qt-gfx-<driver> ... Enable a graphics <driver> in the QtGui library.
                          Possible values for <driver>: [ $CFG_GFX_AVAILABLE ]
     -plugin-gfx-<driver> Enable graphics <driver> as a plugin to be
@@ -4342,7 +4356,6 @@ Qt for Embedded Linux only:
 EOF
 fi
 
-
 if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" -o "$PLATFORM_X11" = "yes" ]; then
     if [ "$CFG_GLIB" = "no" ]; then
         GBY=" "
@@ -4380,8 +4393,10 @@ fi # Help
 # LICENSING, INTERACTIVE PART
 # -----------------------------------------------------------------------------
 
-if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" ]; then
+if [ "$PLATFORM_QWS" = "yes" ]; then
     Platform="Qt for Embedded Linux"
+elif [ "$PLATFORM_QPA" = "yes" ]; then
+    Platform="Qt Lighthouse"
 elif [ "$XPLATFORM_SYMBIAN" = "yes" ]; then
     Platform="Qt for Symbian"
 elif [ "$PLATFORM_MAC" = "yes" ]; then
@@ -6150,12 +6165,13 @@ if [ "$PLATFORM_QPA" = "yes" ]; then
             QMAKE_INCDIR_OPENGL_ES2=`$PKG_CONFIG --variable=includedir glesv2 2>/dev/null`
             QMAKE_LIBDIR_OPENGL_ES2=`$PKG_CONFIG --variable=libdir glesv2 2>/dev/null`
             QMAKE_LIBS_OPENGL_ES2=`$PKG_CONFIG --libs glesv2 2>/dev/null`
+            QMAKE_CFLAGS_OPENGL_ES2=`$PKG_CONFIG --cflags glesv2 2>/dev/null`
             QMakeVar set QMAKE_INCDIR_OPENGL_ES2 "$QMAKE_INCDIR_OPENGL_ES2"
             QMakeVar set QMAKE_LIBDIR_OPENGL_ES2 "$QMAKE_LIBDIR_OPENGL_ES2"
             QMakeVar set QMAKE_LIBS_OPENGL_ES2 "$QMAKE_LIBS_OPENGL_ES2"
         fi
 
-        "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS -I$QMAKE_INCDIR_OPENGL_ES2 $QMAKE_LIBS_OPENGL_ES2 -L$QMAKE_LIBDIR_OPENGL_ES2
+        "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_LIBS_OPENGL_ES2 $QMAKE_CFLAGS_OPENGL_ES2
         if [ $? != "0" ]; then
             echo "The OpenGL ES 2.0 functionality test failed!"
             echo " You might need to modify the include and library search paths by editing"
@@ -6200,8 +6216,8 @@ if [ "$PLATFORM_QPA" = "yes" ]; then
         QMAKE_LIBDIR_WAYLAND=`$PKG_CONFIG --variable=libdir wayland-client 2>/dev/null`
 
         if [ -n "$PKG_CONFIG" ] && $PKG_CONFIG --exists xkbcommon 2>/dev/null; then
-            QMAKE_CFLAGS_WAYLAND=$QMAKE_CFLAGS_WAYLAND `$PKG_CONFIG --cflags xkbcommon 2>/dev/null`
-            QMAKE_LIBS_WAYLAND=$QMAKE_LIBS_WAYLAND `$PKG_CONFIG --libs xkbcommon 2>/dev/null`
+            QMAKE_CFLAGS_WAYLAND="$QMAKE_CFLAGS_WAYLAND `$PKG_CONFIG --cflags xkbcommon 2>/dev/null`"
+            QMAKE_LIBS_WAYLAND="$QMAKE_LIBS_WAYLAND `$PKG_CONFIG --libs xkbcommon 2>/dev/null`"
         else
             QMAKE_DEFINES_WAYLAND=QT_NO_WAYLAND_XKB
         fi
@@ -6216,7 +6232,7 @@ if [ "$PLATFORM_QPA" = "yes" ]; then
         QMakeVar set QMAKE_DEFINES_WAYLAND " $QMAKE_DEFINES_WAYLAND"
     fi
 
-    if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/wayland "Wayland" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_WAYLAND -I$QMAKE_INCDIR_WAYLAND $QMAKE_LIBS_WAYLAND; then
+    if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/qpa/wayland "Wayland" $L_FLAGS $I_FLAGS $l_FLAGS $QMAKE_CFLAGS_WAYLAND $QMAKE_LIBS_WAYLAND; then
         QT_CONFIG="$QT_CONFIG wayland"
     fi
 
@@ -6285,7 +6301,7 @@ if [ "$PLATFORM_QWS" = "yes" ]; then
     fi
 fi
 
-if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" ]; then
+if [ "$PLATFORM_QWS" = "yes" ]; then
 
     # screen drivers
     for screen in ${CFG_GFX_ON} ${CFG_GFX_PLUGIN}; do
@@ -6791,7 +6807,7 @@ fi
 #-------------------------------------------------------------------------------
 
 ### fix this: user input should be validated in a loop
-if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" ]; then
+if [ "$PLATFORM_QWS" = "yes" ]; then
     PROMPT_FOR_DEPTHS="yes"
 else
     PROMPT_FOR_DEPTHS="no"
@@ -6992,13 +7008,8 @@ else
 fi
 
 if [ "$CFG_OPENGL" = "es1" ] || [ "$CFG_OPENGL" = "es2" ]; then
-    if [ "$PLATFORM_QWS" = "yes" -o "$PLATFORM_QPA" = "yes" ]; then
-	if [ "$PLATFORM_QWS" = "yes" ]; then
-	    QCONFIG_FLAGS="$QCONFIG_FLAGS Q_BACKINGSTORE_SUBSURFACES"
-	else
-	    echo "### Q_BACKINGSTORE_SUBSURFACES disabled, re-enable once it compiles again"
-	fi
-	QCONFIG_FLAGS="$QCONFIG_FLAGS Q_USE_EGLWINDOWSURFACE"
+    if [ "$PLATFORM_QWS" = "yes" ]; then
+        QCONFIG_FLAGS="$QCONFIG_FLAGS Q_BACKINGSTORE_SUBSURFACES"
     fi
     QCONFIG_FLAGS="$QCONFIG_FLAGS QT_OPENGL_ES"
 fi
@@ -8126,7 +8137,7 @@ QMakeVar set sql-plugins "$SQL_PLUGINS"
 [ "$CFG_SXE" = "no" ]        && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_SXE"
 [ "$CFG_DBUS" = "no" ]      && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_DBUS"
 
-if [ "$PLATFORM_QWS" != "yes" ]; then
+if [ "$PLATFORM_QWS" != "yes" -a "$PLATFORM_QPA" != "yes" ]; then
     [ "$CFG_GRAPHICS_SYSTEM" = "raster" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_GRAPHICSSYSTEM_RASTER"
     [ "$CFG_GRAPHICS_SYSTEM" = "opengl" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_GRAPHICSSYSTEM_OPENGL"
     [ "$CFG_GRAPHICS_SYSTEM" = "openvg" ] && QCONFIG_FLAGS="$QCONFIG_FLAGS QT_GRAPHICSSYSTEM_OPENVG"
@@ -8351,6 +8362,11 @@ if [ -n "$QT_CFLAGS_FPU" ]; then
     echo "MMP_RULES += \"ARMFPU $QT_CFLAGS_FPU\"" >> "$QTCONFIG.tmp"
 fi
 
+if [ -n "$QMAKE_INCDIR_OPENGL_ES2" ]; then
+    echo "\n#Qt opengl include path" >> "$QTCONFIG.tmp"
+    echo "QMAKE_INCDIR_OPENGL_ES2 = \"$QMAKE_INCDIR_OPENGL_ES2\"" >> "$QTCONFIG.tmp"
+fi
+
 # replace qconfig.pri if it differs from the newly created temp file
 if cmp -s "$QTCONFIG.tmp" "$QTCONFIG"; then
     rm -f "$QTCONFIG.tmp"
@@ -8614,7 +8630,7 @@ if [ "$CFG_ARCH" = "arm" ] || [ "$CFG_ARCH" = "armv6" ]; then
     echo "iWMMXt support ......... ${CFG_IWMMXT}"
     echo "NEON support ........... ${CFG_NEON}"
 fi
-[ "${PLATFORM_QWS}" != "yes" ] && echo "Graphics System ........ $CFG_GRAPHICS_SYSTEM"
+[ "${PLATFORM_QWS}" != "yes" -a "${PLATFORM_QPA}" != "yes" ] && echo "Graphics System ........ $CFG_GRAPHICS_SYSTEM"
 echo "IPv6 support ........... $CFG_IPV6"
 echo "IPv6 ifname support .... $CFG_IPV6IFNAME"
 echo "getaddrinfo support .... $CFG_GETADDRINFO"
@@ -8650,7 +8666,7 @@ else
 fi
 echo "zlib support ........... $CFG_ZLIB"
 echo "Session management ..... $CFG_SM"
-if [ "$PLATFORM_QWS" = "yes"  -o "$PLATFORM_QPA" = "yes" ]; then
+if [ "$PLATFORM_QWS" = "yes" ]; then
     echo "Embedded support ....... $CFG_EMBEDDED"
     if [ "$CFG_QWS_FREETYPE" = "auto" ]; then
 	echo "Freetype2 support ...... $CFG_QWS_FREETYPE ($CFG_LIBFREETYPE)"