summaryrefslogtreecommitdiffstats
path: root/doc/src/qmake-manual.qdoc
diff options
context:
space:
mode:
authorLars Knoll <lars.knoll@nokia.com>2009-03-23 09:18:55 (GMT)
committerSimon Hausmann <simon.hausmann@nokia.com>2009-03-23 09:18:55 (GMT)
commite5fcad302d86d316390c6b0f62759a067313e8a9 (patch)
treec2afbf6f1066b6ce261f14341cf6d310e5595bc1 /doc/src/qmake-manual.qdoc
downloadQt-e5fcad302d86d316390c6b0f62759a067313e8a9.zip
Qt-e5fcad302d86d316390c6b0f62759a067313e8a9.tar.gz
Qt-e5fcad302d86d316390c6b0f62759a067313e8a9.tar.bz2
Long live Qt 4.5!
Diffstat (limited to 'doc/src/qmake-manual.qdoc')
-rw-r--r--doc/src/qmake-manual.qdoc4175
1 files changed, 4175 insertions, 0 deletions
diff --git a/doc/src/qmake-manual.qdoc b/doc/src/qmake-manual.qdoc
new file mode 100644
index 0000000..30da8c6
--- /dev/null
+++ b/doc/src/qmake-manual.qdoc
@@ -0,0 +1,4175 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+ \page qmake-manual.html
+ \title qmake Manual
+ \startpage {index.html}{Qt Reference Documentation}
+ \nextpage qmake Tutorial
+
+ \ingroup buildsystem
+ \ingroup qttools
+ \keyword qmake
+
+ \c qmake is a tool that helps simplify the build
+ process for development project across different platforms. \c qmake
+ automates the generation of Makefiles so that only a few lines of
+ information are needed to create each Makefile. \c qmake can be used for
+ any software project, whether it is written in Qt or not.
+
+ \c qmake generates a Makefile based on the information in a project
+ file. Project files are created by the developer, and are usually
+ simple, but more sophisticated project files can be created for
+ complex projects.
+ \c qmake contains additional features to support development with Qt,
+ automatically including build rules for \l{moc.html}{moc}
+ and \l{uic.html}{uic}.
+ \c qmake can also generate projects for Microsoft Visual studio
+ without requiring the developer to change the project file.
+
+ \section1 Getting Started
+
+ The \l{qmake Tutorial} and guide to \l{qmake Common Projects} provide overviews
+ that aim to help new users get started with \c qmake.
+
+ \list
+ \o \l{qmake Tutorial}
+ \tableofcontents{1 qmake Tutorial}
+ \endlist
+
+ \list
+ \o \l{qmake Common Projects}
+ \tableofcontents{1 qmake Common Projects}
+ \endlist
+
+ \section1 Table of Contents
+
+ \list
+ \o \l{Using qmake}
+ \tableofcontents{1 Using qmake}
+ \o \l{qmake Project Files}
+ \tableofcontents{1 qmake Project Files}
+ \o \l{Running qmake}
+ \tableofcontents{1 Running qmake}
+ \o \l{qmake Platform Notes}
+ \tableofcontents{1 qmake Platform Notes}
+ \o \l{qmake Advanced Usage}
+ \tableofcontents{1 qmake Advanced Usage}
+ \o \l{Using Precompiled Headers}
+ \tableofcontents{1 Using Precompiled Headers}
+ \o \l{qmake Reference}
+ \tableofcontents{1 qmake Reference}
+ \o \l{qmake Variable Reference}
+ \tableofcontents{1 qmake Variable Reference}
+ \o \l{qmake Function Reference}
+ \tableofcontents{1 qmake Function Reference}
+ \o \l{Configuring qmake's Environment}
+ \tableofcontents{1 Configuring qmake's Environment}
+ \endlist
+*/
+
+/*!
+ \page qmake-using.html
+ \title Using qmake
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Manual
+ \nextpage qmake Project Files
+
+ \c qmake provides a project-oriented system for managing the build
+ process for applications, libraries, and other components. This
+ approach gives developers control over the source files used, and
+ allows each of the steps in the process to be described concisely,
+ typically within a single file. \c qmake expands the information in
+ each project file to a Makefile that executes the necessary commands
+ for compiling and linking.
+
+ In this document, we provide a basic introduction to project files,
+ describe some of the main features of \c qmake, and show how to use
+ \c qmake on the command line.
+
+ \section1 Describing a Project
+
+ Projects are described by the contents of project (\c .pro) files.
+ The information within these is used by \c qmake to generate a Makefile
+ containing all the commands that are needed to build each project.
+ Project files typically contain a list of source and header files,
+ general configuration information, and any application-specific details,
+ such as a list of extra libraries to link against, or a list of extra
+ include paths to use.
+
+ Project files can contain a number of different elements, including
+ comments, variable declarations, built-in functions, and some simple
+ control structures. In most simple projects, it is only necessary
+ to declare the source and header files that are used to build the
+ project with some basic configuration options.
+
+ Complete examples of project files can be found in the
+ \l{qmake Tutorial}.
+ An introduction to project files can be found in the
+ \l{qmake Project Files} chapter, and a more detailed description is
+ available in the \l{qmake Reference}.
+
+ \section1 Building a Project
+
+ For simple projects, you only need to run \c qmake in the top
+ level directory of your project. By default, \c qmake generates a
+ Makefile that you then use to build the project, and you can then
+ run your platform's \c make tool to build the project.
+
+ \c qmake can also be used to generate project files. A full
+ description of \c{qmake}'s command line options can be found in the
+ \l{Running qmake} chapter of this manual.
+
+ \section1 Using Precompiled Headers
+
+ In large projects, it is possible to take advantage of precompiled
+ header files to speed up the build process. This feature is described
+ in detail in the \l{Using Precompiled Headers} chapter.
+*/
+
+/*!
+ \page qmake-project-files.html
+ \title qmake Project Files
+ \contentspage {qmake Manual}{Contents}
+ \previouspage Using qmake
+ \nextpage Running qmake
+
+ Project files contain all the information required by \c qmake to build
+ your application, library, or plugin. The resources used by your project
+ are generally specified using a series of declarations, but support for
+ simple programming constructs allow you to describe different build
+ processes for different platforms and environments.
+
+ \tableofcontents
+
+ \section1 Project File Elements
+
+ The project file format used by \c qmake can be used to support both
+ simple and fairly complex build systems. Simple project files will
+ use a straightforward declarative style, defining standard variables
+ to indicate the source and header files that are used in the project.
+ Complex projects may use the control flow structures to fine-tune the
+ build process.
+
+ The following sections describe the different types of elements used
+ in project files.
+
+ \section2 Variables
+
+ In a project file, variables are used to hold lists of strings.
+ In the simplest projects, these variables inform \c qmake about the
+ configuration options to use, or supply filenames and paths to use
+ in the build process.
+
+ \c qmake looks for certain variables in each project file, and it
+ uses the contents of these to determine what it should write to a
+ Makefile. For example, the list of values in the \c HEADERS and
+ \c SOURCES variables are used to tell \c qmake about header and
+ source files in the same directory as the project file.
+
+ Variables can also be used internally to store temporary lists of values,
+ and existing lists of values can be overwritten or extended with new
+ values.
+
+ The following lines show how lists of values are assigned to variables:
+
+ \snippet doc/src/snippets/qmake/variables.pro 0
+
+ Note that the first assignment only includes values that are specified on
+ the same line as the \c SOURCES variable. The second assignment splits
+ the items across lines by using the \c \\ character.
+
+ The list of values in a variable is extended in the following way:
+
+ \snippet doc/src/snippets/qmake/variables.pro 1
+
+ The \c CONFIG variable is another special variable that \c qmake
+ uses when generating a Makefile. It is discussed in the section on
+ \l{#GeneralConfiguration}{general configuration} later in this chapter.
+ In the above line, \c qt is added to the list of existing values
+ contained in \c CONFIG.
+
+ The following table lists the variables that \c qmake recognizes, and
+ describes what they should contain.
+
+ \table
+ \header \o Variable \o Contents
+ \row \o CONFIG \o General project configuration options.
+ \row \o DESTDIR \o The directory in which the executable or binary file will
+ be placed.
+ \row \o FORMS \o A list of .ui files to be processed by \c uic.
+ \row \o HEADERS \o A list of filenames of header (.h) files used when
+ building the project.
+ \row \o QT \o Qt-specific configuration options.
+ \row \o RESOURCES \o A list of resource (.rc) files to be included in the
+ final project. See the \l{The Qt Resource System} for
+ more information about these files.
+ \row \o SOURCES \o A list of source code files to be used when building
+ the project.
+ \row \o TEMPLATE \o The template to use for the project. This determines
+ whether the output of the build process will be an
+ application, a library, or a plugin.
+ \endtable
+
+ The contents of a variable can be read by prepending the variable name with
+ \c $$. This can be used to assign the contents of one variable to another:
+
+ \snippet doc/src/snippets/qmake/dereferencing.pro 0
+
+ The \c $$ operator is used extensively with built-in functions that operate
+ on strings and lists of values. These are described in the chapter on
+ \l{qmake Advanced Usage}.
+
+ Normally, variables are used to contain whitespace-separated lists
+ of values. However, it is sometimes necessary to specify values containing
+ spaces. These must be quoted in the following way:
+
+ \snippet doc/src/snippets/qmake/quoting.pro 0
+
+ The quoted text is treated as a single item in the list of values held by
+ the variable.
+
+ \section2 Comments
+
+ You can add comments to project files. Comments begin with the \c
+ # character and continue to the end of the same line. For example:
+
+ \snippet doc/src/snippets/qmake/comments.pro 0
+
+ To include the \c # character in variable assignments, it is necessary
+ to use the contents of the built-in \c LITERAL_HASH variable. See the
+ \l{qmake Variable Reference#LITERAL_HASH}{variable reference} for more
+ information.
+
+ \section2 Built-in Functions and Control Flow
+
+ \c qmake provides a number of built-in functions to allow the contents
+ of variables to be processed. The most commonly used function in simple
+ project files is the \c include function which takes a filename as an
+ argument. The contents of the given file are included in the project
+ file at the place where the \c include function is used.
+ The \c include function is most commonly used to include other project
+ files:
+
+ \snippet doc/src/snippets/qmake/include.pro 0
+
+ Support for conditional structures is made available via
+ \l{qmake Advanced Usage#scopes}{scopes} that behave like \c if
+ statements in programming languages:
+
+ \snippet doc/src/snippets/qmake/scopes.pro 0
+
+ The assignments inside the braces are only made if the condition is
+ true. In this case, the special \c win32 variable must be set; this
+ happens automatically on Windows, but this can also be specified on
+ other platforms by running \c qmake with the \c{-win32} command line
+ option (see \l{Running qmake} for more information). The opening
+ brace must stand on the same line as the condition.
+
+ Simple loops are constructed by iterating over lists of values using
+ the built-in \c for function. The following code adds directories
+ to the \l{qmake Variable Reference#SUBDIRS}{SUBDIRS} variable, but
+ only if they exist:
+
+ \snippet doc/src/snippets/qmake/functions.pro 0
+
+ More complex operations on variables that would usually require loops
+ are provided by built-in functions such as \c find, \c unique, and
+ \c count. These functions, and many others are provided to manipulate
+ strings and paths, support user input, and call external tools. A list
+ of the functions available can be found in the
+ \l{qmake Advanced Usage} chapter of this manual.
+
+ \section1 Project Templates
+
+ The \c TEMPLATE variable is used to define the type of project that will
+ be built. If this is not declared in the project file, \c qmake assumes
+ that an application should be built, and will generate an appropriate
+ Makefile (or equivalent file) for the purpose.
+
+ The types of project available are listed in the following table with
+ information about the files that \c qmake will generate for each of them:
+
+ \table
+ \header \o Template \o Description of \c qmake output
+ \row \o app (default) \o Creates a Makefile to build an application.
+ \row \o lib \o Creates a Makefile to build a library.
+ \row \o subdirs \o Creates a Makefile containing rules for the
+ subdirectories specified using the \l{qmake Variable Reference#SUBDIRS}{SUBDIRS}
+ variable. Each subdirectory must contain its own project file.
+ \row \o vcapp \o Creates a Visual Studio Project file to build
+ an application.
+ \row \o vclib \o Creates a Visual Studio Project file to build a library.
+ \endtable
+
+ See the \l{qmake Tutorial} for advice on writing project files for
+ projects that use the \c app and \c lib templates.
+
+ When the \c subdirs template is used, \c qmake generates a Makefile
+ to examine each specified subdirectory, process any project file it finds
+ there, and run the platform's \c make tool on the newly-created Makefile.
+ The \l{qmake Variable Reference#SUBDIRS}{SUBDIRS} variable is used to
+ contain a list of all the subdirectories to be processed.
+
+ \target GeneralConfiguration
+ \section1 General Configuration
+
+ The \l{qmake Variable Reference#CONFIG}{CONFIG variable} specifies the
+ options and features that the compiler should use and the libraries that
+ should be linked against. Anything can be added to the \c CONFIG variable,
+ but the options covered below are recognized by \c qmake internally.
+
+ The following options control the compiler flags that are used to build the
+ project:
+
+ \table
+ \header \o Option \o Description
+ \row \o release \o The project is to be built in release mode.
+ This is ignored if \c debug is also specified.
+ \row \o debug \o The project is to be built in debug mode.
+ \row \o debug_and_release \o The project is built in \e both debug and
+ release modes.
+ \row \o build_all \o If \c debug_and_release is specified, the project is
+ built in both debug and release modes by default.
+ \row \o ordered \o When using the \c subdirs template, this option
+ specifies that the directories listed should be processed in the
+ order in which they are given.
+ \row \o warn_on \o The compiler should output as many warnings as possible.
+ This is ignored if \c warn_off is specified.
+ \row \o warn_off \o The compiler should output as few warnings as possible.
+ \endtable
+
+ The \c debug_and_release option is special in that it enables \e both debug and
+ release versions of a project to be built. In such a case, the Makefile that
+ \c qmake generates includes a rule that builds both versions, and this can be
+ invoked in the following way:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 0
+
+ Adding the \c build_all option to the \c CONFIG variable makes this rule
+ the default when building the project, and installation targets will be
+ created for both debug and release builds.
+
+ Note that each of the options specified in the \c CONFIG variable can also be
+ used as a scope condition.
+ You can test for the presence of certain configuration options by using the
+ built-in \l{qmake Function Reference#CONFIG(config)}{CONFIG()} function.
+ For example, the following lines show the function as the condition in a scope
+ to test whether only the \c opengl option is in use:
+
+ \snippet doc/src/snippets/qmake/configscopes.pro 4
+ \snippet doc/src/snippets/qmake/configscopes.pro 5
+
+ This enables different configurations to be defined for \c release and
+ \c debug builds, and is described in more detail in the
+ \l{qmake Advanced Usage#Scopes}{Scopes} section of the
+ \l{qmake Advanced Usage}{Advanced Usage} chapter of this manual.
+
+ The following options define the type of project to be built. Note that some
+ of these options only take effect when used on the relevant platform. On other
+ platforms, they have no effect.
+
+ \table
+ \header \o Option \o Description
+ \row \o qt \o The project is a Qt application and should link against the Qt
+ library. You can use the \c QT variable to control any additional
+ Qt modules that are required by your application.
+ \row \o thread \o The project is a multi-threaded application.
+ \row \o x11 \o The project is an X11 application or library.
+ \endtable
+
+ When using \l{qmake Variable Reference#TEMPLATE}{application or library project
+ templates}, more specialized configuration options can be used to fine tune the
+ build process. These are explained in details in the
+ \l{qmake-common-projects.html}{Common Projects} chapter of this manual.
+
+ For example, if your application uses the Qt library and you want to
+ build it as a multi-threaded application in \c debug mode, your project
+ file will contain the following line:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 1
+
+ Note, that you must use "+=", not "=", or \c qmake will not be able to
+ use Qt's configuration to determine the settings needed for your project.
+
+ \section1 Declaring Qt Libraries
+
+ If the \c CONFIG variable contains the \c qt value, qmake's support for Qt
+ applications is enabled. This makes it possible to fine-tune which of the
+ Qt modules are used by your application. This is achieved with the \c QT
+ variable which can be used to declare the required extension modules.
+ For example, we can enable the XML and network modules in the following way:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 2
+
+ Note that \c QT includes the \c core and \c gui modules by default, so the
+ above declaration \e adds the network and XML modules to this default list.
+ The following assignment \e omits the default modules, and will lead to
+ errors when the application's source code is being compiled:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 3
+
+ If you want to build a project \e without the \c gui module, you need to
+ exclude it with the "-=" operator. By default, \c QT contains both
+ \c core and \c gui, so the following line will result in a minimal
+ Qt project being built:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 4
+
+ The table below shows the options that can be used with the \c QT variable
+ and the features that are associated with each of them:
+
+ \table
+ \header \o Option \o Features
+ \row \o core (included by default) \o QtCore module
+ \row \o gui (included by default) \o QtGui module
+ \row \o network \o QtNetwork module
+ \row \o opengl \o QtOpenGL module
+ \row \o sql \o QtSql module
+ \row \o svg \o QtSvg module
+ \row \o xml \o QtXml module
+ \row \o xmlpatterns \o QtXmlPatterns module
+ \row \o qt3support \o Qt3Support module
+ \endtable
+
+ Note that adding the \c opengl option to the \c QT variable automatically
+ causes the equivalent option to be added to the \c CONFIG variable.
+ Therefore, for Qt applications, it is not necessary to add the \c opengl
+ option to both \c CONFIG and \c{QT}.
+
+ \section1 Configuration Features
+
+ \c qmake can be set up with extra configuration features that are specified
+ in feature (.prf) files. These extra features often provide support for
+ custom tools that are used during the build process. To add a feature to
+ the build process, append the feature name (the stem of the feature filename)
+ to the \c CONFIG variable.
+
+ For example, \c qmake can configure the build process to take advantage
+ of external libraries that are supported by
+ \l{http://www.freedesktop.org/wiki/Software_2fpkgconfig}{pkg-config},
+ such as the D-Bus and ogg libraries, with the following lines:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 5
+
+ More information about features can be found in the
+ \l{qmake Advanced Usage#Adding New Configuration Features}
+ {Adding New Configuration Features} section of the \l{qmake Advanced Usage}
+ chapter.
+
+ \section1 Declaring Other Libraries
+
+ If you are using other libraries in your project in addition to those
+ supplied with Qt, you need to specify them in your project file.
+
+ The paths that \c qmake searches for libraries and the specific libraries
+ to link against can be added to the list of values in the
+ \l{qmake Variable Reference#LIBS}{LIBS} variable. The paths to the libraries
+ themselves can be given, or the familiar Unix-style notation for specifying
+ libraries and paths can be used if preferred.
+
+ For example, the following lines show how a library can be specified:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 6
+
+ The paths containing header files can also be specified in a similar way
+ using the \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH} variable.
+
+ For example, it is possible to add several paths to be searched for header
+ files:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 7
+*/
+
+/*!
+ \page qmake-running.html
+ \title Running qmake
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Project Files
+ \nextpage qmake Platform Notes
+
+ The behavior of \c qmake can be customized when it is run by
+ specifying various options on the command line. These allow the
+ build process to be fine-tuned, provide useful diagnostic
+ information, and can be used to specify the target platform for
+ your project.
+
+ \tableofcontents
+
+ \target Commands
+ \section1 Command-Line Options
+
+ \section2 Syntax
+
+ The syntax used to run \c qmake takes the following simple form:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 8
+
+ \c qmake supports two different modes of operation: In the default mode,
+ \c qmake will use the description in a project file to generate a Makefile,
+ but it is also possible to use \c qmake to generate project files.
+ If you want to explicitly set the mode, you must specify it before all
+ other options. The \c mode can be either of the following two values:
+
+ \list
+ \o \c -makefile \BR
+ \c qmake output will be a Makefile.
+ \o \c -project \BR
+ \c qmake output will be a project file.
+ \endlist
+
+ The following \c options are used to specify both general and mode-specific
+ settings. Options that only apply to the Makefile mode are described in the
+ \l{#MakefileMode}{Makefile Mode Options} section; options that influence the
+ creation of project files are described in the
+ \l{#ProjectMode}{Project File Options} section.
+
+ The \c files argument represents a list of one or more project files, separated
+ by spaces.
+
+ \section2 Options
+
+ A wide range of options can be specified on the command line to \c qmake in
+ order to customize the build process, and to override default settings for
+ your platform. The following basic options provide usage information, specify
+ where \c qmake writes the output file, and control the level of debugging
+ information that will be written to the console:
+
+ \list
+ \o \c -help \BR
+ \c qmake will go over these features and give some useful help.
+ \o \c -o file \BR
+ \c qmake output will be directed to \e file. If this option
+ is not specified, \c qmake will try to use a suitable file name for its
+ output, depending on the mode it is running in.\BR
+ If '-' is specified, output is directed to stdout.
+ \o \c -d \BR
+ \c qmake will output debugging information.
+ \endlist
+
+ For projects that need to be built differently on each target platform, with
+ many subdirectories, you can run \c qmake with each of the following
+ options to set the corresponding platform-specific variable in each
+ project file:
+
+ \list
+ \o \c -unix \BR
+ \c qmake will run in unix mode. In this mode, Unix file
+ naming and path conventions will be used, additionally testing for \c unix
+ (as a scope) will succeed. This is the default mode on all Unices.
+ \o \c -macx \BR
+ \c qmake will run in Mac OS X mode. In this mode, Unix file
+ naming and path conventions will be used, additionally testing for \c macx
+ (as a scope) will succeed. This is the default mode on Mac OS X.
+ \o \c -win32 \BR
+ \c qmake will run in win32 mode. In this mode, Windows file naming and path
+ conventions will be used, additionally testing for \c win32 (as a scope)
+ will succeed. This is the default mode on Windows.
+ \endlist
+
+ The template used for the project is usually specified by the \c TEMPLATE
+ variable in the project file. We can override or modify this by using the
+ following options:
+
+ \list
+ \o \c -t tmpl \BR
+ \c qmake will override any set \c TEMPLATE variables with tmpl, but only
+ \e after the .pro file has been processed.
+ \o \c -tp prefix \BR
+ \c qmake will add the prefix to the \c TEMPLATE variable.
+ \endlist
+
+ The level of warning information can be fine-tuned to help you find problems in
+ your project file:
+
+ \list
+ \o \c -Wall \BR
+ \c qmake will report all known warnings.
+ \o \c -Wnone \BR
+ No warning information will be generated by \c qmake.
+ \o \c -Wparser \BR
+ \c qmake will only generate parser warnings. This will alert
+ you to common pitfalls and potential problems in the parsing of your
+ project files.
+ \o \c -Wlogic \BR
+ \c qmake will warn of common pitfalls and potential problems in your
+ project file. For example, \c qmake will report whether a file is placed
+ into a list of files multiple times, or if a file cannot be found.
+ \endlist
+
+ \target MakefileMode
+ \section2 Makefile Mode Options
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 9
+
+ In Makefile mode, \c qmake will generate a Makefile that is used to build the
+ project. Additionally, the following options may be used in this mode to
+ influence the way the project file is generated:
+
+ \list
+ \o \c -after \BR
+ \c qmake will process assignments given on the command line after
+ the specified files.
+ \o \c -nocache \BR
+ \c qmake will ignore the .qmake.cache file.
+ \o \c -nodepend \BR
+ \c qmake will not generate any dependency information.
+ \o \c -cache file \BR
+ \c qmake will use \e file as the cache file, ignoring any other
+ .qmake.cache files found.
+ \o \c -spec spec \BR
+ \c qmake will use \e spec as a path to platform and compiler information,
+ and the value of \c QMAKESPEC will be ignored.
+ \endlist
+
+ You may also pass \c qmake assignments on the command line;
+ they will be processed before all of the files specified. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 10
+
+ This will generate a Makefile, from test.pro with Unix pathnames. However
+ many of the specified options aren't necessary as they are the default.
+ Therefore, the line can be simplified on Unix to:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 11
+
+ If you are certain you want your variables processed after the
+ files specified, then you may pass the \c -after option. When this
+ is specified, all assignments on the command line after the \c -after
+ option will be postponed until after the specified files are parsed.
+
+ \target ProjectMode
+ \section2 Project Mode Options
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 12
+
+ In project mode, \c qmake will generate a project file. Additionally, you
+ may supply the following options in this mode:
+
+ \list
+ \o \c -r \BR
+ \c qmake will look through supplied directories recursively
+ \o \c -nopwd \BR
+ \c qmake will not look in your current working directory for
+ source code and only use the specified \c files
+ \endlist
+
+ In this mode, the \c files argument can be a list of files or directories.
+ If a directory is specified, it will be included in the \c DEPENDPATH
+ variable, and relevant code from there will be included in the generated
+ project file. If a file is given, it will be appended to the correct
+ variable, depending on its extension; for example, .ui files are added
+ to \c FORMS, and .cpp files are added to \c SOURCES.
+
+ You may also pass assignments on the command line in this mode. When doing
+ so, these assignments will be placed last in the generated project file.
+*/
+
+/*!
+ \page qmake-platform-notes.html
+ \title qmake Platform Notes
+ \contentspage {qmake Manual}{Contents}
+ \previouspage Running qmake
+ \nextpage qmake Advanced Usage
+
+ Many cross-platform projects can be handled by the \c{qmake}'s basic
+ configuration features. On some platforms, it is sometimes useful, or even
+ necessary, to take advantage of platform-specific features. \c qmake knows
+ about many of these features, and these can be accessed via specific
+ variables that only have an effect on the platforms where they are relevant.
+
+ \tableofcontents
+
+ \section1 Mac OS X
+
+ Features specific to this platform include support for creating universal
+ binaries, frameworks and bundles.
+
+ \section2 Source and Binary Packages
+
+ The version of \c qmake supplied in source packages is configured slightly
+ differently to that supplied in binary packages in that it uses a different
+ feature specification. Where the source package typically uses the
+ \c macx-g++ specification, the binary package is typically configured to
+ use the \c macx-xcode specification.
+
+ Users of each package can override this configuration by invoking \c qmake
+ with the \c -spec option (see \l{Running qmake} for more information). This
+ makes it possible, for example, to use \c qmake from a binary package to
+ create a Makefile in a project directory with the following command line
+ invocation:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 13
+
+ \section2 Using Frameworks
+
+ \c qmake is able to automatically generate build rules for linking against
+ frameworks in the standard framework directory on Mac OS X, located at
+ \c{/Library/Frameworks/}.
+
+ Directories other than the standard framework directory need to be specified
+ to the build system, and this is achieved by appending linker options to the
+ \l{qmake Variable Reference#QMAKE_LFLAGS}{QMAKE_LFLAGS} variable, as shown
+ in the following example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 14
+
+ The framework itself is linked in by appending the \c{-framework} options and
+ the name of the framework to the \l{qmake Variable Reference#LIBS}{LIBS}
+ variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 15
+
+ \section2 Creating Frameworks
+
+ Any given library project can be configured so that the resulting library
+ file is placed in a
+ \l{http://developer.apple.com/documentation/MacOSX/Conceptual/BPFrameworks/Concepts/WhatAreFrameworks.html}
+ {framework}, ready for deployment. To do this, set up the project to use the
+ \l{qmake Variable Reference#TEMPLATE}{\c lib template} and add the
+ \c lib_bundle option to the
+ \l{qmake Variable Reference#CONFIG}{CONFIG} variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 16
+
+ The data associated with the library is specified using the
+ \l{qmake Variable Reference#QMAKE_BUNDLE_DATA}{QMAKE_BUNDLE_DATA}
+ variable. This holds items that will be installed with a library
+ bundle, and is often used to specify a collection of header files,
+ as in the following example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 17
+
+ Here, the \c FRAMEWORK_HEADERS variable is a user-defined variable that
+ is used to define the headers required to use a particular framework.
+ Appending it to the \c QMAKE_BUNDLE_DATA variable ensures that the
+ information about these headers are added to the collection of
+ resources that will be installed with the library bundle. Also, the
+ framework's name and version are specified by
+ \l{qmake Variable Reference#QMAKE_FRAMEWORK_BUNDLE_NAME}
+ {QMAKE_FRAMEWORK_BUNDLE_NAME}
+ and \l{qmake Variable Reference#QMAKE_FRAMEWORK_VERSION}
+ {QMAKE_FRAMEWORK_VERSION} variables. By default, the values used for
+ these are obtained from the \l{qmake Variable Reference#TARGET}{TARGET}
+ and \l{qmake Variable Reference#VERSION}{VERSION} variables.
+
+ See \l{Deploying an Application on Mac OS X} for more information about
+ deploying applications and libraries.
+
+ \section2 Creating Universal Binaries
+
+ To create a universal binary for your application, you need to be using
+ a version of Qt that has been configured with the \c{-universal} option.
+
+ The architectures to be supported in the binary are specified with the
+ \l{qmake Variable Reference#CONFIG}{CONFIG} variable. For example, the
+ following assignment causes \c qmake to generate build rules to create
+ a universal binary for both PowerPC and x86 architectures:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 18
+
+ Additionally, developers using a PowerPC-based platform need to set the
+ \l{qmake Variable Reference#QMAKE_MAC_SDK}{QMAKE_MAC_SDK} variable.
+ This process is discussed in more detail in the
+ \l{Deploying an Application on Mac OS X#Architecture Dependencies}{deployment guide for Mac OS X}.
+
+ \section2 Creating and Moving Xcode Projects
+
+ Developers on Mac OS X can take advantage of \c{qmake}'s support for Xcode
+ project files, as described in
+ \l{Qt is Mac OS X Native#Development Tools}{Qt is Mac OS X Native},
+ by running \c qmake to generate an Xcode project from an existing \c qmake
+ project files. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 19
+
+ Note that, if a project is later moved on the disk, \c qmake must be run
+ again to process the project file and create a new Xcode project file.
+
+ \section1 Windows
+
+ Features specific to this platform include support for creating Visual
+ Studio project files and handling manifest files when deploying Qt
+ applications developed using Visual Studio 2005.
+
+ \section2 Creating Visual Studio Project Files
+
+ Developers using Visual Studio to write Qt applications can use the
+ Visual Studio integration facilities provided with the
+ \l{Qt Commercial Editions} and do not need to worry about how
+ project dependencies are managed.
+
+ However, some developers may need to import an existing \c qmake project
+ into Visual Studio. \c qmake is able to take a project file and create a
+ Visual Studio project that contains all the necessary information required
+ by the development environment. This is achieved by setting the \c qmake
+ \l{qmake Variable Reference#TEMPLATE}{project template} to either \c vcapp
+ (for application projects) or \c vclib (for library projects).
+
+ This can also be set using a command line option, for example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 20
+
+ It is possible to recursively generate \c{.vcproj} files in subdirectories
+ and a \c{.sln} file in the main directory, by typing:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 21
+
+
+ Each time you update the project file, you need to run \c qmake to generate
+ an updated Visual Studio project.
+
+ \section2 Visual Studio 2005 Manifest Files
+
+ When deploying Qt applications built using Visual Studio 2005, it is
+ necessary to ensure that the manifest file, created when the application
+ was linked, is handled correctly. This is handled automatically for
+ projects that generate DLLs.
+
+ Removing manifest embedding for application executables can be done with
+ the following assignment to the \l{qmake Variable Reference#CONFIG}
+ {CONFIG} variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 22
+
+ Also, the manifest embedding for DLLs can be removed with the following
+ assignment to the \l{qmake Variable Reference#CONFIG}{CONFIG} variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 23
+
+ This is discussed in more detail in the
+ \l{Deploying an Application on Windows#Visual Studio 2005 Onwards}
+ {deployment guide for Windows}.
+*/
+
+/*!
+ \page qmake-reference.html
+ \title qmake Reference
+ \contentspage {qmake Manual}{Contents}
+ \previouspage Using Precompiled Headers
+ \nextpage qmake Variable Reference
+
+ This reference is a detailed index of all the variables and function
+ that are available for use in \c qmake project files.
+
+ \section1 Variable Reference
+
+ The \l{qmake Variable Reference} describes the variables that are
+ recognized by \c qmake when configuring the build process for
+ projects.
+
+ \section1 Function Reference
+
+ The \l{qmake Function Reference} describes the function that can be
+ used to process the contents of variables defined in project files.
+
+ \target FrequentlyUsedVariables
+ \section1 Frequently Used Variables
+
+ The following variables are frequently used in project files to describe
+ common aspects of the build process. These are fully described in the
+ \l{qmake-variable-reference.html}{Variable Reference}.
+
+ \list
+ \o \l{qmake Variable Reference#CONFIG}{CONFIG}
+ \o \l{qmake Variable Reference#DEF_FILE}{DEF_FILE}
+ \o \l{qmake Variable Reference#DEFINES}{DEFINES}
+ \o \l{qmake Variable Reference#DESTDIR}{DESTDIR}
+ \o \l{qmake Variable Reference#DISTFILES}{DISTFILES}
+ \o \l{qmake Variable Reference#DLLDESTDIR}{DLLDESTDIR}
+ \o \l{qmake Variable Reference#FORMS}{FORMS}
+ \o \l{qmake Variable Reference#FORMS3}{FORMS3}
+ \o \l{qmake Variable Reference#GUID}{GUID}
+ \o \l{qmake Variable Reference#HEADERS}{HEADERS}
+ \o \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH}
+ \o \l{qmake Variable Reference#LEXSOURCES}{LEXSOURCES}
+ \o \l{qmake Variable Reference#LIBS}{LIBS}
+ \o \l{qmake Variable Reference#MOC_DIR}{MOC_DIR}
+ \o \l{qmake Variable Reference#OBJECTS_DIR}{OBJECTS_DIR}
+ \o \l{qmake Variable Reference#QT}{QT}
+ \o \l{qmake Variable Reference#RCC_DIR}{RCC_DIR}
+ \o \l{qmake Variable Reference#REQUIRES}{REQUIRES}
+ \o \l{qmake Variable Reference#SOURCES}{SOURCES}
+ \o \l{qmake Variable Reference#SUBDIRS}{SUBDIRS}
+ \o \l{qmake Variable Reference#TARGET}{TARGET}
+ \o \l{qmake Variable Reference#TEMPLATE}{TEMPLATE}
+ \o \l{qmake Variable Reference#TRANSLATIONS}{TRANSLATIONS}
+ \o \l{qmake Variable Reference#UI_DIR}{UI_DIR}
+ \o \l{qmake Variable Reference#UI_HEADERS_DIR}{UI_HEADERS_DIR}
+ \o \l{qmake Variable Reference#UI_SOURCES_DIR}{UI_SOURCES_DIR}
+ \o \l{qmake Variable Reference#VERSION}{VERSION}
+ \o \l{qmake Variable Reference#YACCSOURCES}{YACCSOURCES}
+ \endlist
+
+ \section1 Environment Variables and Configuration
+
+ The \l{Configuring qmake's Environment} chapter of this manual
+ describes the environment variables that \c qmake uses when
+ configuring the build process.
+*/
+
+/*!
+ \page qmake-variable-reference.html
+ \title qmake Variable Reference
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Reference
+ \nextpage qmake Function Reference
+
+ \c{qmake}'s fundamental behavior is influenced by variable declarations that
+ define the build process of each project. Some of these declare resources,
+ such as headers and source files, that are common to each platform; others
+ are used to customize the behavior of compilers and linkers on specific
+ platforms.
+
+ Platform-specific variables follow the naming pattern of the
+ variables which they extend or modify, but include the name of the relevant
+ platform in their name. For example, \c QMAKE_LIBS can be used to specify a list
+ of libraries that a project needs to link against, and \c QMAKE_LIBS_X11 can be
+ used to extend or override this list.
+
+ \tableofcontents{3}
+
+ \target CONFIG
+ \section1 CONFIG
+
+ The \c CONFIG variable specifies project configuration and
+ compiler options. The values will be recognized internally by
+ \c qmake and have special meaning. They are as follows.
+
+ These \c CONFIG values control compilation flags:
+
+ \table 95%
+ \header \o Option \o Description
+ \row \o release \o The project is to be built in release mode.
+ This is ignored if \c debug is also specified.
+ \row \o debug \o The project is to be built in debug mode.
+ \row \o debug_and_release \o The project is built in \e both debug and
+ release modes. This can have some unexpected side effects (see
+ below for more information).
+ \row \o build_all \o If \c debug_and_release is specified, the project is
+ built in both debug and release modes by default.
+ \row \o ordered \o When using the \c subdirs template, this option
+ specifies that the directories listed should be processed in the
+ order in which they are given.
+ \row \o precompile_header \o Enables support for the use of
+ \l{Using Precompiled Headers}{precompiled headers} in projects.
+ \row \o warn_on \o The compiler should output as many warnings as possible.
+ This is ignored if \c warn_off is specified.
+ \row \o warn_off \o The compiler should output as few warnings as possible.
+ \omit
+ \row \o qt_debug \o Specifies that the project should be built against
+ debug versions of the Qt libraries specified using the
+ \l{#QT}{QT} variable.
+ \row \o qt_release \o Specifies that the project should be built against
+ release versions of the Qt libraries specified using the
+ \l{#QT}{QT} variable.
+ \endomit
+ \endtable
+
+ Since the \c debug option overrides the \c release option when both are
+ defined in the \c CONFIG variable, it is necessary to use the
+ \c debug_and_release option if you want to allow both debug and release
+ versions of a project to be built. In such a case, the Makefile that
+ \c qmake generates includes a rule that builds both versions, and this can
+ be invoked in the following way:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 24
+
+ On Windows (or if Qt is configured with \c{-debug_and_release}, adding the
+ \c build_all option to the \c CONFIG variable makes this rule the default
+ when building the project, and installation targets will be created for
+ both debug and release builds.
+
+ Additionally, adding \c debug_and_release to the \c CONFIG variable will
+ cause both \c debug and \c release to be defined in the contents of
+ \c CONFIG. When the project file is processed, the
+ \l{qmake Advanced Usage#Scopes}{scopes} that test for each value will be
+ processed for \e both debug and release modes. The \c{build_pass} variable
+ will be set for each of these mode, and you can test for this to perform
+ build-specific tasks. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 25
+
+ As a result, it may be useful to define mode-specific variables, such as
+ \l{#QMAKE_LFLAGS_RELEASE}{QMAKE_LFLAGS_RELEASE}, instead of general
+ variables, such as \l{#QMAKE_LFLAGS}{QMAKE_LFLAGS}, where possible.
+
+ The following options define the application/library type:
+
+ \table 95%
+ \header \o Option \o Description
+ \row \o qt \o The target is a Qt application/library and requires the Qt
+ library and header files. The proper include and library paths for the
+ Qt library will automatically be added to the project. This is defined
+ by default, and can be fine-tuned with the \c{\l{#qt}{QT}} variable.
+ \row \o thread \o The target is a multi-threaded application or library. The
+ proper defines and compiler flags will automatically be added to
+ the project.
+ \row \o x11 \o The target is a X11 application or library. The proper
+ include paths and libraries will automatically be added to the
+ project.
+ \row \o windows \o The target is a Win32 window application (app only). The
+ proper include paths, compiler flags and libraries will
+ automatically be added to the project.
+ \row \o console \o The target is a Win32 console application (app only). The
+ proper include paths, compiler flags and libraries will
+ automatically be added to the
+ project.
+ \row \o shared \o{1,3} The target is a shared object/DLL. The proper
+ include paths, compiler flags and libraries will automatically be
+ added to the project.
+ \row \o dll \o
+ \row \o dylib \o
+ \row \o static \o{1,2} The target is a static library (lib only). The proper
+ compiler flags will automatically be added to the project.
+ \row \o staticlib \o
+ \row \o plugin \o The target is a plugin (lib only). This enables dll as well.
+ \row \o designer \o The target is a plugin for \QD.
+ \row \o uic3 \o Configures qmake to run uic3 on the content of \c FORMS3 if
+ defined; otherwise the contents of \c FORMS will be processed instead.
+ \row \o no_lflags_merge \o Ensures that the list of libraries stored in the
+ \c LIBS variable is not reduced to a list of unique values before it is used.
+ \row \o resources \o Configures qmake to run rcc on the content of \c RESOURCES
+ if defined.
+ \endtable
+
+ These options are used to set the compiler flags:
+
+ \table 95%
+ \header \o Option \o Description
+ \row \o 3dnow \o AMD 3DNow! instruction support is enabled.
+ \row \o exceptions \o Exception support is enabled.
+ \row \o mmx \o Intel MMX instruction support is enabled.
+ \row \o rtti \o RTTI support is enabled.
+ \row \o stl \o STL support is enabled.
+ \row \o sse \o SSE support is enabled.
+ \row \o sse2 \o SSE2 support is enabled.
+ \endtable
+
+ These options define specific features on Windows only:
+
+ \table 95%
+ \header \o Option \o Description
+ \row \o flat \o When using the vcapp template this will put all the source
+ files into the source group and the header files into the header group
+ regardless of what directory they reside in. Turning this
+ option off will group the files within the source/header group depending
+ on the directory they reside. This is turned on by default.
+ \row \o embed_manifest_dll \o Embeds a manifest file in the DLL created
+ as part of a library project.
+ \row \o embed_manifest_exe \o Embeds a manifest file in the DLL created
+ as part of an application project.
+ \row \o incremental \o Used to enable or disable incremental linking in Visual
+ C++, depending on whether this feature is enabled or disabled by default.
+ \endtable
+
+ See \l{qmake Platform Notes#Visual Studio 2005 Manifest Files}{qmake Platform Notes}
+ for more information on the options for embedding manifest files.
+
+ These options only have an effect on Mac OS X:
+
+ \table 95%
+ \header \o Option \o Description
+ \row \o ppc \o Builds a PowerPC binary.
+ \row \o x86 \o Builds an i386 compatible binary.
+ \row \o app_bundle \o Puts the executable into a bundle (this is the default).
+ \row \o lib_bundle \o Puts the library into a library bundle.
+ \endtable
+
+ The build process for bundles is also influenced by
+ the contents of the \l{#QMAKE_BUNDLE_DATA}{QMAKE_BUNDLE_DATA} variable.
+
+ These options have an effect on Linux/Unix platforms:
+
+ \table 95%
+ \header \o Option \o Description
+ \row \o largefile \o Includes support for large files.
+ \row \o separate_debug_info \o Puts debugging information for libraries in
+ separate files.
+ \endtable
+
+ The \c CONFIG variable will also be checked when resolving scopes. You may
+ assign anything to this variable.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 26
+
+ \target DEFINES
+ \section1 DEFINES
+
+ \c qmake adds the values of this variable as compiler C
+ preprocessor macros (-D option).
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 27
+
+ \target DEF_FILE
+ \section1 DEF_FILE
+
+ \e {This is only used on Windows when using the \c app template}.
+
+ Specifies a \c .def file to be included in the project.
+
+ \target DEPENDPATH
+ \section1 DEPENDPATH
+
+ This variable contains the list of all directories to look in to
+ resolve dependencies. This will be used when crawling through
+ \c included files.
+
+ \target DEPLOYMENT
+ \section1 DEPLOYMENT
+
+ \e {This is only used on Windows CE.}
+
+ Specifies which additional files will be deployed. Deployment means the
+ transfer of files from the development system to the target device or
+ emulator.
+
+ Files can be deployed by either creating a Visual Studio project or using
+ the \l {Using QTestLib remotely on Windows CE}{cetest} executable.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 28
+
+ This will upload all PNG images in \c path to the same directory your
+ build target will be deployed to.
+
+ The default deployment target path for Windows CE is
+ \c{%CSIDL_PROGRAM_FILES%\target}, which usually gets expanded to
+ \c{\Program Files\target}.
+
+ It is also possible to specify multiple \c sources to be deployed on
+ target \c paths. In addition, different variables can be used for
+ deployment to different directories.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 29
+
+ \note All linked Qt libraries will be deployed to the path specified
+ by \c{myFiles.path}.
+
+ \target DEPLOYMENT_PLUGIN
+ \section1 DEPLOYMENT_PLUGIN
+
+ \e {This is only used on Windows CE.}
+
+ This variable specifies the Qt plugins that will be deployed. All plugins
+ available in Qt can be explicitly deployed to the device. See
+ \l{Static Plugins}{Static Plugins} for a complete list.
+
+ \note No plugins will be deployed automatically. If the application
+ depends on plugins, these plugins have to be specified manually.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 128
+
+ This will upload the jpeg imageformat plugin to the plugins directory
+ on the Windows CE device.
+
+ \target DESTDIR
+ \section1 DESTDIR
+
+ Specifies where to put the \l{#TARGET}{target} file.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 30
+
+ \target DESTDIR_TARGET
+ \section1 DESTDIR_TARGET
+
+ This variable is set internally by \c qmake, which is basically the
+ \c DESTDIR variable with the \c TARGET variable appened at the end.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target DLLDESTDIR
+ \section1 DLLDESTDIR
+
+ Specifies where to copy the \l{#TARGET}{target} dll.
+
+ \target DISTFILES
+ \section1 DISTFILES
+
+ This variable contains a list of files to be included in the dist
+ target. This feature is supported by UnixMake specs only.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 31
+
+ \target DSP_TEMPLATE
+ \section1 DSP_TEMPLATE
+
+ This variable is set internally by \c qmake, which specifies where the
+ dsp template file for basing generated dsp files is stored. The value
+ of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target FORMS
+ \section1 FORMS
+
+ This variable specifies the .ui files (see \link
+ designer-manual.html Qt Designer \endlink) to be processed through \c uic
+ before compiling. All dependencies, headers and source files required
+ to build these .ui files will automatically be added to the project.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 32
+
+ If FORMS3 is defined in your project, then this variable must contain
+ forms for uic, and not uic3. If CONFIG contains uic3, and FORMS3 is not
+ defined, the this variable must contain only uic3 type forms.
+
+ \target FORMS3
+ \section1 FORMS3
+
+ This variable specifies the old style .ui files to be processed
+ through \c uic3 before compiling, when \c CONFIG contains uic3.
+ All dependencies, headers and source files required to build these
+ .ui files will automatically be added to the project.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 33
+
+ \target GUID
+ \section1 GUID
+
+ Specifies the GUID that is set inside a \c{.vcproj} file. The GUID is
+ usually randomly determined. However, should you require a fixed GUID,
+ it can be set using this variable.
+
+ This variable is specific to \c{.vcproj} files only; it is ignored
+ otherwise.
+
+ \target HEADERS
+ \section1 HEADERS
+
+ Defines the header files for the project.
+
+ \c qmake will generate dependency information (unless \c -nodepend
+ is specified on the \l{Running qmake#Commands}{command line})
+ for the specified headers. \c qmake will also automatically detect if
+ \c moc is required by the classes in these headers, and add the
+ appropriate dependencies and files to the project for generating and
+ linking the moc files.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 34
+
+ See also \l{#SOURCES}{SOURCES}.
+
+ \target INCLUDEPATH
+ \section1 INCLUDEPATH
+
+ This variable specifies the #include directories which should be
+ searched when compiling the project. Use ';' or a space as the
+ directory separator.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 35
+
+ \target INSTALLS
+ \section1 INSTALLS
+
+ This variable contains a list of resources that will be installed when
+ \c{make install} or a similar installation procedure is executed. Each
+ item in the list is typically defined with attributes that provide
+ information about where it will be installed.
+
+ For example, the following \c{target.path} definition describes where the
+ build target will be installed, and the \c INSTALLS assignment adds the
+ build target to the list of existing resources to be installed:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 36
+
+ \target LEXIMPLS
+ \section1 LEXIMPLS
+
+ This variable contains a list of lex implementation files. The value
+ of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely
+ needs to be modified.
+
+ \target LEXOBJECTS
+ \section1 LEXOBJECTS
+
+ This variable contains the names of intermediate lex object
+ files.The value of this variable is typically handled by
+ \c qmake and rarely needs to be modified.
+
+ \target LEXSOURCES
+ \section1 LEXSOURCES
+
+ This variable contains a list of lex source files. All
+ dependencies, headers and source files will automatically be added to
+ the project for building these lex files.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 37
+
+ \target LIBS
+ \section1 LIBS
+
+ This variable contains a list of libraries to be linked into the project.
+ You can use the Unix \c -l (library) and -L (library path) flags and qmake
+ will do the correct thing with these libraries on Windows (namely this
+ means passing the full path of the library to the linker). The only
+ limitation to this is the library must exist, for qmake to find which
+ directory a \c -l lib lives in.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 38
+
+ \bold{Note:} On Windows, specifying libraries with the \c{-l} option,
+ as in the above example, will cause the library with the highest version
+ number to be used; for example, \c{libmath2.lib} could potentially be used
+ instead of \c{libmathlib}. To avoid this ambiguity, we recommend that you
+ explicitly specify the library to be used by including the \c{.lib}
+ file name suffix.
+
+ By default, the list of libraries stored in \c LIBS is reduced to a list of
+ unique names before it is used. To change this behavior, add the
+ \c no_lflags_merge option to the \c CONFIG variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 39
+
+ \target LITERAL_HASH
+ \section1 LITERAL_HASH
+
+ This variable is used whenever a literal hash character (\c{#}) is needed in
+ a variable declaration, perhaps as part of a file name or in a string passed
+ to some external application.
+
+ For example:
+
+ \snippet doc/src/snippets/qmake/comments.pro 1
+
+ By using \c LITERAL_HASH in this way, the \c # character can be used
+ to construct a URL for the \c message() function to print to the console.
+
+ \target MAKEFILE
+ \section1 MAKEFILE
+
+ This variable specifies the name of the Makefile which
+ \c qmake should use when outputting the dependency information
+ for building a project. The value of this variable is typically
+ handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target MAKEFILE_GENERATOR
+ \section1 MAKEFILE_GENERATOR
+
+ This variable contains the name of the Makefile generator to use
+ when generating a Makefile. The value of this variable is typically
+ handled internally by \c qmake and rarely needs to be modified.
+
+ \target MOC_DIR
+ \section1 MOC_DIR
+
+ This variable specifies the directory where all intermediate moc
+ files should be placed.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 40
+
+ \target OBJECTS
+ \section1 OBJECTS
+
+ This variable is generated from the \link #SOURCES SOURCES
+ \endlink variable. The extension of each source file will have been
+ replaced by .o (Unix) or .obj (Win32). The value of this variable is
+ typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and
+ rarely needs to be modified.
+
+ \target OBJECTS_DIR
+ \section1 OBJECTS_DIR
+
+ This variable specifies the directory where all intermediate
+ objects should be placed.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 41
+
+ \target OBJMOC
+ \section1 OBJMOC
+
+ This variable is set by \c qmake if files can be found that
+ contain the Q_OBJECT macro. \c OBJMOC contains the
+ name of all intermediate moc object files. The value of this variable
+ is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \target POST_TARGETDEPS
+ \section1 POST_TARGETDEPS
+
+ All libraries that the \l{#TARGET}{target} depends on can be
+ listed in this variable. Some backends do not support this, these include
+ MSVC Dsp, and ProjectBuilder .pbproj files. Generally this is supported
+ internally by these build tools, this is useful for explicitly listing
+ dependant static libraries.
+
+ This list will go after all builtin (and \link #PRE_TARGETDEPS
+ $$PRE_TARGETDEPS \endlink) dependencies.
+
+ \target PRE_TARGETDEPS
+ \section1 PRE_TARGETDEPS
+
+ All libraries that the \l{#TARGET}{target} depends on can be
+ listed in this variable. Some backends do not support this, these include
+ MSVC Dsp, and ProjectBuilder .pbproj files. Generally this is supported
+ internally by these build tools, this is useful for explicitly listing
+ dependant static libraries.
+
+ This list will go before all builtin dependencies.
+
+ \target PRECOMPILED_HEADER
+ \section1 PRECOMPILED_HEADER
+
+ This variable indicates the header file for creating a precompiled
+ header file, to increase the compilation speed of a project.
+ Precompiled headers are currently only supported on some platforms
+ (Windows - all MSVC project types, Mac OS X - Xcode, Makefile,
+ Unix - gcc 3.3 and up).
+
+ On other platforms, this variable has different meaning, as noted
+ below.
+
+ This variable contains a list of header files that require some
+ sort of pre-compilation step (such as with moc). The value of this
+ variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \target PWD
+ \section1 PWD
+
+ This variable contains the full path leading to the directory where
+ the \c qmake project file (project.pro) is located.
+
+ \target OUT_PWD
+ \section1 OUT_PWD
+
+ This variable contains the full path leading to the directory where
+ \c qmake places the generated Makefile.
+
+ \target QMAKE_systemvariable
+ \section1 QMAKE
+
+ This variable contains the name of the \c qmake program
+ itself and is placed in generated Makefiles. The value of this
+ variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \target QMAKESPEC_systemvariable
+ \section1 QMAKESPEC
+
+ This variable contains the name of the \c qmake
+ configuration to use when generating Makefiles. The value of this
+ variable is typically handled by \c qmake and rarely needs to be modified.
+
+ Use the \c{QMAKESPEC} environment variable to override the \c qmake configuration.
+ Note that, due to the way \c qmake reads project files, setting the \c{QMAKESPEC}
+ environment variable from within a project file will have no effect.
+
+ \target QMAKE_APP_FLAG
+ \section1 QMAKE_APP_FLAG
+
+ This variable is empty unless the \c app
+ \l{#TEMPLATE}{TEMPLATE} is specified. The value of this
+ variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified. Use the following instead:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 42
+
+ \target QMAKE_APP_OR_DLL
+ \section1 QMAKE_APP_OR_DLL
+
+ This variable is empty unless the \c app or \c dll
+ \l{#TEMPLATE}{TEMPLATE} is specified. The value of this
+ variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \target QMAKE_AR_CMD
+ \section1 QMAKE_AR_CMD
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains the command for invoking the program which
+ creates, modifies and extracts archives. The value of this variable is
+ typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf}
+ and rarely needs to be modified.
+
+ \target QMAKE_BUNDLE_DATA
+ \section1 QMAKE_BUNDLE_DATA
+
+ This variable is used to hold the data that will be installed with a library
+ bundle, and is often used to specify a collection of header files.
+
+ For example, the following lines add \c path/to/header_one.h
+ and \c path/to/header_two.h to a group containing information about the
+ headers supplied with the framework:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 43
+
+ The last line adds the information about the headers to the collection of
+ resources that will be installed with the library bundle.
+
+ Library bundles are created when the \c lib_bundle option is added to the
+ \l{#CONFIG}{CONFIG} variable.
+
+ See \l{qmake Platform Notes#Creating Frameworks}{qmake Platform Notes} for
+ more information about creating library bundles.
+
+ \e{This is used on Mac OS X only.}
+
+ \section1 QMAKE_BUNDLE_EXTENSION
+
+ This variable defines the extension to be used for library bundles.
+ This allows frameworks to be created with custom extensions instead of the
+ standard \c{.framework} directory name extension.
+
+ For example, the following definition will result in a framework with the
+ \c{.myframework} extension:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 44
+
+ \e{This is used on Mac OS X only.}
+
+ \section1 QMAKE_CC
+
+ This variable specifies the C compiler that will be used when building
+ projects containing C source code. Only the file name of the compiler
+ executable needs to be specified as long as it is on a path contained
+ in the \c PATH variable when the Makefile is processed.
+
+ \target QMAKE_CFLAGS_DEBUG
+ \section1 QMAKE_CFLAGS_DEBUG
+
+ This variable contains the flags for the C compiler in debug mode.The value of this variable is
+ typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf}
+ and rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_MT
+ \section1 QMAKE_CFLAGS_MT
+
+ This variable contains the compiler flags for creating a
+ multi-threaded application or when the version of Qt that you link
+ against is a multi-threaded statically linked library. The value of
+ this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_MT_DBG
+ \section1 QMAKE_CFLAGS_MT_DBG
+
+ This variable contains the compiler flags for creating a debuggable
+ multi-threaded application or when the version of Qt that you link
+ against is a debuggable multi-threaded statically linked library. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_MT_DLL
+ \section1 QMAKE_CFLAGS_MT_DLL
+
+ \e {This is used on Windows only.}
+
+ This variable contains the compiler flags for creating a
+ multi-threaded dll or when the version of Qt that you link
+ against is a multi-threaded dll. The value of this variable is typically
+ handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and
+ rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_MT_DLLDBG
+ \section1 QMAKE_CFLAGS_MT_DLLDBG
+
+ \e {This is used on Windows only.}
+
+ This variable contains the compiler flags for creating a debuggable
+ multi-threaded dll or when the version of Qt that you link
+ against is a debuggable multi-threaded statically linked library.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_RELEASE
+ \section1 QMAKE_CFLAGS_RELEASE
+
+ This variable contains the compiler flags for creating a non-debuggable
+ application. The value of this variable is typically
+ handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and
+ rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_SHLIB
+ \section1 QMAKE_CFLAGS_SHLIB
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains the compiler flags for creating a shared
+ library. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CFLAGS_THREAD
+ \section1 QMAKE_CFLAGS_THREAD
+
+ This variable contains the compiler flags for creating a multi-threaded
+ application. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CFLAGS_WARN_OFF
+ \section1 QMAKE_CFLAGS_WARN_OFF
+
+ This variable is not empty if the warn_off
+ \l{#TEMPLATE}{TEMPLATE} option is specified. The value of this
+ variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf}
+ and rarely needs to be modified.
+
+ \target QMAKE_CFLAGS_WARN_ON
+ \section1 QMAKE_CFLAGS_WARN_ON
+
+ This variable is not empty if the warn_on
+ \l{#TEMPLATE}{TEMPLATE} option is specified.
+ The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CLEAN
+ \section1 QMAKE_CLEAN
+
+ This variable contains any files which are not generated files (such as moc and uic
+ generated files) and object files that should be removed when using "make clean".
+
+ \section1 QMAKE_CXX
+
+ This variable specifies the C++ compiler that will be used when building
+ projects containing C++ source code. Only the file name of the compiler
+ executable needs to be specified as long as it is on a path contained
+ in the \c PATH variable when the Makefile is processed.
+
+ \section1 QMAKE_CXXFLAGS
+
+ This variable contains the C++ compiler flags that are used when building
+ a project. The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. The flags
+ specific to debug and release modes can be adjusted by modifying
+ the \c QMAKE_CXXFLAGS_DEBUG and \c QMAKE_CXXFLAGS_RELEASE variables,
+ respectively.
+
+ \target QMAKE_CXXFLAGS_DEBUG
+ \section1 QMAKE_CXXFLAGS_DEBUG
+
+ This variable contains the C++ compiler flags for creating a debuggable
+ application. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_MT
+ \section1 QMAKE_CXXFLAGS_MT
+
+ This variable contains the C++ compiler flags for creating a multi-threaded
+ application. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_MT_DBG
+ \section1 QMAKE_CXXFLAGS_MT_DBG
+
+ This variable contains the C++ compiler flags for creating a debuggable multi-threaded
+ application. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_MT_DLL
+ \section1 QMAKE_CXXFLAGS_MT_DLL
+
+ \c {This is used on Windows only.}
+
+ This variable contains the C++ compiler flags for creating a multi-threaded
+ dll. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_MT_DLLDBG
+ \section1 QMAKE_CXXFLAGS_MT_DLLDBG
+
+ \c {This is used on Windows only.}
+
+ This variable contains the C++ compiler flags for creating a multi-threaded debuggable
+ dll. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_RELEASE
+ \section1 QMAKE_CXXFLAGS_RELEASE
+
+ This variable contains the C++ compiler flags for creating an
+ application. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_SHLIB
+ \section1 QMAKE_CXXFLAGS_SHLIB
+
+ This variable contains the C++ compiler flags for creating a
+ shared library. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_THREAD
+ \section1 QMAKE_CXXFLAGS_THREAD
+
+ This variable contains the C++ compiler flags for creating a
+ multi-threaded application. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs
+ to be modified.
+
+ \target QMAKE_CXXFLAGS_WARN_OFF
+ \section1 QMAKE_CXXFLAGS_WARN_OFF
+
+ This variable contains the C++ compiler flags for suppressing compiler warnings.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_CXXFLAGS_WARN_ON
+ \section1 QMAKE_CXXFLAGS_WARN_ON
+
+ This variable contains C++ compiler flags for generating compiler warnings.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_DISTCLEAN
+ \section1 QMAKE_DISTCLEAN
+
+ This variable removes extra files upon the invocation of \c{make distclean}.
+
+ \target QMAKE_EXTENSION_SHLIB
+ \section1 QMAKE_EXTENSION_SHLIB
+
+ This variable contains the extention for shared libraries. The value of this
+ variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf}
+ and rarely needs to be modified.
+
+ Note that platform-specific variables that change the extension will override
+ the contents of this variable.
+
+ \section1 QMAKE_EXT_MOC
+
+ This variable changes the extention used on included moc files.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions}.
+
+ \section1 QMAKE_EXT_UI
+
+ This variable changes the extention used on /e Designer UI files.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions}.
+
+ \section1 QMAKE_EXT_PRL
+
+ This variable changes the extention used on created PRL files.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions},
+ \l{Configuring qmake's Environment#libdepend}{Library Dependencies}.
+
+ \section1 QMAKE_EXT_LEX
+
+ This variable changes the extention used on files given to lex.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions},
+ \l{#LEXSOURCES}{LEXSOURCES}.
+
+ \section1 QMAKE_EXT_YACC
+ This variable changes the extention used on files given to yacc.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions},
+ \l{#YACCSOURCES}{YACCSOURCES}.
+
+ \section1 QMAKE_EXT_OBJ
+
+ This variable changes the extention used on generated object files.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions}.
+
+ \section1 QMAKE_EXT_CPP
+
+ This variable changes the interpretation of all suffixes in this
+ list of values as files of type C++ source code.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions}.
+
+ \section1 QMAKE_EXT_H
+
+ This variable changes the interpretation of all suffixes in this
+ list of values as files of type C header files.
+
+ See also \l{Configuring qmake's Environment#Extensions}{File Extensions}.
+
+ \section1 QMAKE_EXTRA_COMPILERS
+
+ This variable contains the extra compilers/preprocessors that have been added
+
+ See also \l{Configuring qmake's Environment#Customizing}{Customizing Makefile Output}
+
+ \section1 QMAKE_EXTRA_TARGETS
+
+ This variable contains the extra targets that have been added
+
+ See also \l{Configuring qmake's Environment#Customizing}{Customizing Makefile Output}
+
+ \target QMAKE_FAILED_REQUIREMENTS
+ \section1 QMAKE_FAILED_REQUIREMENTS
+
+ This variable contains the list of requirements that were failed to be met when
+ \c qmake was used. For example, the sql module is needed and wasn't compiled into Qt. The
+ value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf}
+ and rarely needs to be modified.
+
+ \target QMAKE_FILETAGS
+ \section1 QMAKE_FILETAGS
+
+ This variable contains the file tags needed to be entered into the Makefile, such as SOURCES
+ and HEADERS. The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_FRAMEWORK_BUNDLE_NAME
+
+ In a framework project, this variable contains the name to be used for the
+ framework that is built.
+
+ By default, this variable contains the same value as the \l{#TARGET}{TARGET}
+ variable.
+
+ See \l{qmake Platform Notes#Creating Frameworks}{qmake Platform Notes} for
+ more information about creating frameworks and library bundles.
+
+ \e{This is used on Mac OS X only.}
+
+ \target QMAKE_FRAMEWORK_VERSION
+ \section1 QMAKE_FRAMEWORK_VERSION
+
+ For projects where the build target is a Mac OS X framework, this variable
+ is used to specify the version number that will be applied to the framework
+ that is built.
+
+ By default, this variable contains the same value as the \l{#VERSION}{VERSION}
+ variable.
+
+ See \l{qmake Platform Notes#Creating Frameworks}{qmake Platform Notes} for
+ more information about creating frameworks.
+
+ \e{This is used on Mac OS X only.}
+
+ \target QMAKE_INCDIR
+ \section1 QMAKE_INCDIR
+
+ This variable contains the location of all known header files to be added to
+ INCLUDEPATH when building an application. The value of this variable is
+ typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely
+ needs to be modified.
+
+ \target QMAKE_INCDIR_OPENGL
+ \section1 QMAKE_INCDIR_OPENGL
+
+ This variable contains the location of OpenGL header files to be added
+ to INCLUDEPATH when building an application with OpenGL support. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_INCDIR_QT
+ \section1 QMAKE_INCDIR_QT
+
+ This variable contains the location of all known header file
+ paths to be added to INCLUDEPATH when building a Qt application. The value
+ of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_INCDIR_THREAD
+ \section1 QMAKE_INCDIR_THREAD
+
+ This variable contains the location of all known header file
+ paths to be added to INCLUDEPATH when building a multi-threaded application.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_INCDIR_X11
+ \section1 QMAKE_INCDIR_X11
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains the location of X11 header file paths to be
+ added to INCLUDEPATH when building a X11 application. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target QMAKE_INFO_PLIST
+ \section1 QMAKE_INFO_PLIST
+
+ \e {This is used on Mac OS X platforms only.}
+
+ This variable contains the name of the property list file, \c{.plist}, you
+ would like to include in your Mac OS X application bundle.
+
+ In the \c{.plist} file, you can define some variables, e.g., @EXECUTABLE@,
+ which qmake will replace with the actual executable name. Other variables
+ include @ICON@, @TYPEINFO@, @LIBRARY@, and @SHORT_VERSION@.
+
+ \note Most of the time, the default \c{Info.plist} is good enough.
+
+ \section1 QMAKE_LFLAGS
+
+ This variable contains a general set of flags that are passed to
+ the linker. If you need to change the flags used for a particular
+ platform or type of project, use one of the specialized variables
+ for that purpose instead of this variable.
+
+ \target QMAKE_LFLAGS_CONSOLE
+ \section1 QMAKE_LFLAGS_CONSOLE
+
+ \e {This is used on Windows only.}
+
+ This variable contains link flags when building console
+ programs. The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_CONSOLE_DLL
+
+ \e {This is used on Windows only.}
+
+ This variable contains link flags when building console
+ dlls. The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_DEBUG
+
+ This variable contains link flags when building debuggable applications. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_PLUGIN
+
+ This variable contains link flags when building plugins. The value
+ of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_QT_DLL
+
+ This variable contains link flags when building programs that
+ use the Qt library built as a dll. The value of this variable is
+ typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_RELEASE
+
+ This variable contains link flags when building applications for
+ release. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_SHAPP
+
+ This variable contains link flags when building applications which are using
+ the \c app template. The value of this variable is typically handled by
+ \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_SHLIB
+
+ This variable contains link flags when building shared libraries
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_SONAME
+
+ This variable specifies the link flags to set the name of shared objects,
+ such as .so or .dll. The value of this variable is typically handled by \c
+ qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_THREAD
+
+ This variable contains link flags when building multi-threaded projects.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_WINDOWS
+
+ \e {This is used on Windows only.}
+
+ This variable contains link flags when building Windows GUI projects
+ (i.e. non-console applications).
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LFLAGS_WINDOWS_DLL
+
+ \e {This is used on Windows only.}
+
+ This variable contains link flags when building Windows DLL projects.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBDIR
+
+ This variable contains the location of all known library
+ directories.The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBDIR_FLAGS
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains the location of all library
+ directory with -L prefixed. The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBDIR_OPENGL
+
+ This variable contains the location of the OpenGL library
+ directory.The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBDIR_QT
+
+ This variable contains the location of the Qt library
+ directory.The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBDIR_X11
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains the location of the X11 library
+ directory.The value of this variable is typically handled by
+ \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS
+
+ This variable contains all project libraries. The value of this
+ variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_CONSOLE
+
+ \e {This Windows-specific variable is no longer used.}
+
+ Prior to Qt 4.2, this variable was used to list the libraries
+ that should be linked against when building a console application
+ project on Windows. \l{#QMAKE_LIBS_WINDOW}{QMAKE_LIBS_WINDOW}
+ should now be used instead.
+
+ \section1 QMAKE_LIBS_OPENGL
+
+ This variable contains all OpenGL libraries. The value of this
+ variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_OPENGL_QT
+
+ This variable contains all OpenGL Qt libraries.The value of this
+ variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_QT
+
+ This variable contains all Qt libraries.The value of this
+ variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_QT_DLL
+
+ \e {This is used on Windows only.}
+
+ This variable contains all Qt libraries when Qt is built as a dll. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_QT_OPENGL
+
+ This variable contains all the libraries needed to link against if
+ OpenGL support is turned on. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_QT_THREAD
+
+ This variable contains all the libraries needed to link against if
+ thread support is turned on. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_RT
+
+ \e {This is used with Borland compilers only.}
+
+ This variable contains the runtime library needed to link against when
+ building an application. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_RTMT
+
+ \e {This is used with Borland compilers only.}
+
+ This variable contains the runtime library needed to link against when
+ building a multi-threaded application. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_THREAD
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains all libraries that need to be linked against
+ when building a multi-threaded application. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_WINDOWS
+
+ \e {This is used on Windows only.}
+
+ This variable contains all windows libraries.The value of this
+ variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_X11
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains all X11 libraries.The value of this
+ variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIBS_X11SM
+
+ \e {This is used on Unix platforms only.}
+
+ This variable contains all X11 session management libraries. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LIB_FLAG
+
+ This variable is not empty if the \c lib template is specified. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_LINK_SHLIB_CMD
+
+ This variable contains the command to execute when creating a
+ shared library. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_POST_LINK
+
+ This variable contains the command to execute after linking the TARGET
+ together. This variable is normally empty and therefore nothing is
+ executed, additionally some backends will not support this - mostly only
+ Makefile backends.
+
+ \section1 QMAKE_PRE_LINK
+
+ This variable contains the command to execute before linking the TARGET
+ together. This variable is normally empty and therefore nothing is
+ executed, additionally some backends will not support this - mostly only
+ Makefile backends.
+
+ \section1 QMAKE_LN_SHLIB
+
+ This variable contains the command to execute when creating a link
+ to a shared library. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_MAC_SDK
+
+ This variable is used on Mac OS X when building universal binaries.
+ This process is described in more detail in the
+ \l{Deploying an Application on Mac OS X#Architecture Dependencies}{Deploying
+ an Application on Mac OS X} document.
+
+ \section1 QMAKE_MACOSX_DEPLOYMENT_TARGET
+ This variable only has an effect when building on Mac OS X. On that
+ platform, the variable will be forwarded to the MACOSX_DEPLOYMENT_TARGET
+ environment variable, which is interpreted by the compiler or linker.
+ For more information, see the
+ \l{Deploying an Application on Mac OS X#Mac OS X Version Dependencies}{Deploying
+ an Application on Mac OS X} document.
+
+ \section1 QMAKE_MAKEFILE
+
+ This variable contains the name of the Makefile to create. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_MOC_SRC
+
+ This variable contains the names of all moc source files to
+ generate and include in the project. The value of this variable is
+ typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_QMAKE
+
+ This variable contains the location of qmake if it is not in the path.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_QT_DLL
+
+ This variable is not empty if Qt was built as a dll. The
+ value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_RESOURCE_FLAGS
+
+ This variable is used to customize the list of options passed to the
+ \l{rcc}{Resource Compiler} in each of the build rules where it is used.
+ For example, the following line ensures that the \c{-threshold} and
+ \c{-compress} options are used with particular values each time that
+ \c rcc is invoked:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 45
+
+ \section1 QMAKE_RUN_CC
+
+ This variable specifies the individual rule needed to build an object.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_RUN_CC_IMP
+
+ This variable specifies the individual rule needed to build an object.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_RUN_CXX
+
+ This variable specifies the individual rule needed to build an object.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_RUN_CXX_IMP
+
+ This variable specifies the individual rule needed to build an object.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_TARGET
+
+ This variable contains the name of the project target. The value of
+ this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 QMAKE_UIC
+
+ This variable contains the location of uic if it is not in the path.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ It can be used to specify arguments to uic as well, such as additional plugin
+ paths. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 46
+
+ \section1 QT
+
+ The values stored in the \c QT variable control which of the Qt modules are
+ used by your project.
+
+ The table below shows the options that can be used with the \c QT variable
+ and the features that are associated with each of them:
+
+ \table
+ \header \o Option \o Features
+ \row \o core (included by default) \o QtCore module
+ \row \o gui (included by default) \o QtGui module
+ \row \o network \o QtNetwork module
+ \row \o opengl \o QtOpenGL module
+ \row \o phonon \o Phonon Multimedia Framework
+ \row \o sql \o QtSql module
+ \row \o svg \o QtSvg module
+ \row \o xml \o QtXml module
+ \row \o webkit \o WebKit integration
+ \row \o qt3support \o Qt3Support module
+ \endtable
+
+ By default, \c QT contains both \c core and \c gui, ensuring that standard
+ GUI applications can be built without further configuration.
+
+ If you want to build a project \e without the QtGui module, you need to
+ exclude the \c gui value with the "-=" operator; the following line will
+ result in a minimal Qt project being built:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 47
+
+ Note that adding the \c opengl option to the \c QT variable automatically
+ causes the equivalent option to be added to the \c CONFIG variable.
+ Therefore, for Qt applications, it is not necessary to add the \c opengl
+ option to both \c CONFIG and \c{QT}.
+
+ \section1 QTPLUGIN
+
+ This variable contains a list of names of static plugins that are to be
+ compiled with an application so that they are available as built-in
+ resources.
+
+ \target QT_VERSION
+ \section1 QT_VERSION
+
+ This variable contains the current version of Qt.
+
+ \target QT_MAJOR_VERSION
+ \section1 QT_MAJOR_VERSION
+
+ This variable contains the current major version of Qt.
+
+ \target QT_MINOR_VERSION
+ \section1 QT_MINOR_VERSION
+
+ This variable contains the current minor version of Qt.
+
+ \target QT_PATCH_VERSION
+ \section1 QT_PATCH_VERSION
+
+ This variable contains the current patch version of Qt.
+
+ \section1 RC_FILE
+
+ This variable contains the name of the resource file for the application.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target RCC_DIR
+ \section1 RCC_DIR
+
+ This variable specifies the directory where all intermediate
+ resource files should be placed.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 48
+
+ \target REQUIRES
+ \section1 REQUIRES
+
+ This is a special variable processed by \c qmake. If the
+ contents of this variable do not appear in CONFIG by the time this
+ variable is assigned, then a minimal Makefile will be generated that
+ states what dependencies (the values assigned to REQUIRES) are
+ missing.
+
+ This is mainly used in Qt's build system for building the examples.
+
+ \section1 RES_FILE
+
+ This variable contains the name of the resource file for the application.
+ The value of this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target SIGNATURE_FILE
+ \section1 SIGNATURE_FILE
+
+ \e {This is only used on Windows CE.}
+
+ Specifies which signature file should be used to sign the project target.
+
+ \note This variable will overwrite the setting you have specified in configure,
+ with the \c -signature option.
+
+ \target SOURCES
+ \section1 SOURCES
+
+ This variable contains the name of all source files in the project.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 49
+
+ See also \l{#HEADERS}{HEADERS}
+
+ \section1 SRCMOC
+
+ This variable is set by \c qmake if files can be found that
+ contain the Q_OBJECT macro. \c SRCMOC contains the
+ name of all the generated moc files. The value of this variable
+ is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \target SUBDIRS
+ \section1 SUBDIRS
+
+ This variable, when used with the \l{#TEMPLATE}{\c subdirs template}
+ contains the names of all subdirectories that contain parts of the project
+ that need be built. Each subdirectory must contain its own project file.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 50
+
+ It is essential that the project file in each subdirectory has the same
+ name as the subdirectory itself, so that \c qmake can find it.
+ For example, if the subdirectory is called \c myapp then the project file
+ in that directory should be called \c myapp.pro.
+
+ If you need to ensure that the subdirectories are built in the order in
+ which they are specified, update the \l{#CONFIG}{CONFIG} variable to
+ include the \c ordered option:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 51
+
+ \target TARGET
+ \section1 TARGET
+
+ This specifies the name of the target file.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 52
+
+ The project file above would produce an executable named \c myapp on
+ unix and 'myapp.exe' on windows.
+
+ \section1 TARGET_EXT
+
+ This variable specifies the target's extension. The value of this variable
+ is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \section1 TARGET_x
+
+ This variable specifies the target's extension with a major version number. The value of this variable
+ is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \section1 TARGET_x.y.z
+
+ This variable specifies the target's extension with version number. The value of this variable
+ is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \target TEMPLATE
+ \section1 TEMPLATE
+
+ This variable contains the name of the template to use when
+ generating the project. The allowed values are:
+
+ \table
+ \header \o Option \o Description
+ \row \o app \o Creates a Makefile for building applications (the default). (See
+ \l{qmake Common Projects#Application}{qmake Common Projects} for more information.)
+ \row \o lib \o Creates a Makefile for building libraries. (See
+ \l{qmake Common Projects#Library}{qmake Common Projects} for more information.)
+ \row \o subdirs \o Creates a Makefile for building targets in subdirectories.
+ The subdirectories are specified using the \l{#SUBDIRS}{SUBDIRS}
+ variable.
+ \row \o vcapp \o \e {Windows only} Creates an application project for Visual Studio.
+ (See \l{qmake Platform Notes#Creating Visual Studio Project Files}{qmake Platform Notes}
+ for more information.)
+ \row \o vclib \o \e {Windows only} Creates a library project for Visual Studio.
+ (See \l{qmake Platform Notes#Creating Visual Studio Project Files}{qmake Platform Notes}
+ for more information.)
+ \endtable
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 53
+
+ The template can be overridden by specifying a new template type with the
+ \c -t command line option. This overrides the template type \e after the .pro
+ file has been processed. With .pro files that use the template type to
+ determine how the project is built, it is necessary to declare TEMPLATE on
+ the command line rather than use the \c -t option.
+
+ \section1 TRANSLATIONS
+
+ This variable contains a list of translation (.ts) files that contain
+ translations of the user interface text into non-native languages.
+
+ See the \l{Qt Linguist Manual} for more information about
+ internationalization (i18n) and localization (l10n) with Qt.
+
+ \section1 UICIMPLS
+
+ This variable contains a list of the generated implementation files by UIC.
+ The value of this variable
+ is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be
+ modified.
+
+ \section1 UICOBJECTS
+
+ This variable is generated from the UICIMPLS variable. The extension of each
+ file will have been replaced by .o (Unix) or .obj (Win32). The value of this variable is
+ typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and
+ rarely needs to be modified.
+
+ \target UI_DIR
+ \section1 UI_DIR
+
+ This variable specifies the directory where all intermediate files from uic
+ should be placed. This variable overrides both UI_SOURCES_DIR and
+ UI_HEADERS_DIR.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 54
+
+ \target UI_HEADERS_DIR
+ \section1 UI_HEADERS_DIR
+
+ This variable specifies the directory where all declaration files (as
+ generated by uic) should be placed.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 55
+
+ \target UI_SOURCES_DIR
+ \section1 UI_SOURCES_DIR
+
+ This variable specifies the directory where all implementation files (as generated
+ by uic) should be placed.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 56
+
+ \target VERSION
+ \section1 VERSION
+
+ This variable contains the version number of the application or library if
+ either the \c app \l{#TEMPLATE}{TEMPLATE} or the \c lib \l{#TEMPLATE}{TEMPLATE}
+ is specified.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 57
+
+ \section1 VER_MAJ
+
+ This variable contains the major version number of the library, if the
+ \c lib \l{#TEMPLATE}{template} is specified.
+
+ \section1 VER_MIN
+
+ This variable contains the minor version number of the library, if the
+ \c lib \l{#TEMPLATE}{template} is specified.
+
+ \section1 VER_PAT
+
+ This variable contains the patch version number of the library, if the
+ \c lib \l{#TEMPLATE}{template} is specified.
+
+ \section1 VPATH
+
+ This variable tells \c qmake where to search for files it cannot
+ open. With this you may tell \c qmake where it may look for things
+ like SOURCES, and if it finds an entry in SOURCES that cannot be
+ opened it will look through the entire VPATH list to see if it can
+ find the file on its own.
+
+ See also \l{#DEPENDPATH}{DEPENDPATH}.
+
+ \section1 YACCIMPLS
+
+ This variable contains a list of yacc source files. The value of
+ this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \section1 YACCOBJECTS
+
+ This variable contains a list of yacc object files. The value of
+ this variable is typically handled by \c qmake or
+ \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified.
+
+ \target YACCSOURCES
+ \section1 YACCSOURCES
+
+ This variable contains a list of yacc source files to be included
+ in the project. All dependencies, headers and source files will
+ automatically be included in the project.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 58
+
+ \section1 _PRO_FILE_
+
+ This variable contains the path to the project file in use.
+
+ For example, the following line causes the location of the project
+ file to be written to the console:
+
+ \snippet doc/src/snippets/qmake/project_location.pro project file
+
+ \section1 _PRO_FILE_PWD_
+
+ This variable contains the path to the directory containing the project
+ file in use.
+
+ For example, the following line causes the location of the directory
+ containing the project file to be written to the console:
+
+ \snippet doc/src/snippets/qmake/project_location.pro project file directory
+*/
+
+/*!
+ \page qmake-function-reference.html
+ \title qmake Function Reference
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Variable Reference
+ \nextpage Configuring qmake's Environment
+
+ \c qmake provides built-in functions to allow the contents of
+ variables to be processed, and to enable tests to be performed
+ during the configuration process. Functions that process the
+ contents of variables typically return values that can be assigned
+ to other variables, and these values are obtained by prefixing
+ function with the \c $$ operator. Functions that perform tests
+ are usually used as the conditional parts of scopes; these are
+ indicated in the function descriptions below.
+
+ \tableofcontents{2}
+
+ \section1 basename(variablename)
+
+ Returns the basename of the file specified. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 59
+
+ \section1 CONFIG(config)
+ [Conditional]
+
+ This function can be used to test for variables placed into the
+ \c CONFIG variable. This is the same as regular old style (tmake) scopes,
+ but has the added advantage a second parameter can be passed to test for
+ the active config. As the order of values is important in \c CONFIG
+ variables (i.e. the last one set will be considered the active config for
+ mutually exclusive values) a second parameter can be used to specify a set
+ of values to consider. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 60
+
+ Because release is considered the active setting (for feature parsing)
+ it will be the CONFIG used to generate the build file. In the common
+ case a second parameter is not needed, but for specific mutual
+ exclusive tests it is invaluable.
+
+ \section1 contains(variablename, value)
+ [Conditional]
+
+ Succeeds if the variable \e variablename contains the value \e value;
+ otherwise fails. You can check the return value of this function using
+ a scope.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 61
+
+ The contents of the scope are only processed if the \c drivers
+ variable contains the value, \c network. If this is the case, the
+ appropriate files are added to the \c SOURCES and \c HEADERS
+ variables.
+
+ \section1 count(variablename, number)
+ [Conditional]
+
+ Succeeds if the variable \e variablename contains a list with the
+ specified \e number of value; otherwise fails.
+
+ This function is used to ensure that declarations inside a scope are
+ only processed if the variable contains the correct number of values;
+ for example:
+
+ \snippet doc/src/snippets/qmake/functions.pro 2
+
+ \section1 dirname(file)
+
+ Returns the directory name part of the specified file. For example:
+
+ \snippet doc/src/snippets/qmake/dirname.pro 0
+
+ \section1 error(string)
+
+ This function never returns a value. \c qmake displays the given
+ \e string to the user, and exits. This function should only be used
+ for unrecoverable errors.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 62
+
+ \section1 eval(string)
+ [Conditional]
+
+ Evaluates the contents of the string using \c qmake's syntax rules
+ and returns true.
+ Definitions and assignments can be used in the string to modify the
+ values of existing variables or create new definitions.
+
+ For example:
+ \snippet doc/src/snippets/qmake/functions.pro 4
+
+ Note that quotation marks can be used to delimit the string, and that
+ the return value can be discarded if it is not needed.
+
+ \section1 exists(filename)
+ [Conditional]
+
+ Tests whether a file with the given \e filename exists.
+ If the file exists, the function succeeds; otherwise it fails.
+ If a regular expression is specified for the filename, this function
+ succeeds if any file matches the regular expression specified.
+
+ For example:
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 63
+
+ Note that "/" can be used as a directory separator, regardless of the
+ platform in use.
+
+ \section1 find(variablename, substr)
+
+ Places all the values in \e variablename that match \e substr. \e
+ substr may be a regular expression, and will be matched accordingly.
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 64
+
+ MY_VAR2 will contain '-Lone -Ltwo -Lthree -Lfour -Lfive', and MY_VAR3 will
+ contains 'three two three'.
+
+ \section1 for(iterate, list)
+
+ This special test function will cause a loop to be started that
+ iterates over all values in \e list, setting \e iterate to each
+ value in turn. As a convenience, if \e list is 1..10 then iterate will
+ iterate over the values 1 through 10.
+
+ The use of an else scope afer a condition line with a for() loop is
+ disallowed.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 65
+
+ \section1 include(filename)
+ [Conditional]
+
+ Includes the contents of the file specified by \e filename into the
+ current project at the point where it is included. This function
+ succeeds if \e filename is included; otherwise it fails. The included
+ file is processed immediately.
+
+ You can check whether the file was included by using this function as
+ the condition for a scope; for example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 66
+
+ \section1 infile(filename, var, val)
+ [Conditional]
+
+ Succeeds if the file \e filename (when parsed by \c qmake itself)
+ contains the variable \e var with a value of \e val; otherwise fails.
+ If you do not specify a third argument (\e val), the function will
+ only test whether \e var has been declared in the file.
+
+ \section1 isEmpty(variablename)
+ [Conditional]
+
+ Succeeds if the variable \e variablename is empty; otherwise fails.
+ This is the equivalent of \c{count( variablename, 0 )}.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 67
+
+ \section1 join(variablename, glue, before, after)
+
+ Joins the value of \e variablename with \c glue. If this value is
+ non-empty it prefixes the value with \e before and suffix it with \e
+ after. \e variablename is the only required field, the others default
+ to empty strings. If you need to encode spaces in \e glue, \e before, or \e
+ after you must quote them.
+
+ \section1 member(variablename, position)
+
+ Returns the value at the given \e position in the list of items in
+ \e variablename.
+ If an item cannot be found at the position specified, an empty string is
+ returned. \e variablename is the only required field. If not specified,
+ \c position defaults to 0, causing the first value in the list to be
+ returned.
+
+ \section1 message(string)
+
+ This function simply writes a message to the console. Unlike the
+ \c error() function, this function allows processing to continue.
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 68
+
+ The above line causes "This is a message" to be written to the console.
+ The use of quotation marks is optional.
+
+ \note By default, messages are written out for each Makefile generated by
+ qmake for a given project. If you want to ensure that messages only appear
+ once for each project, test the \c build_pass variable
+ \l{qmake Advanced Usage}{in conjunction with a scope} to filter out
+ messages during builds; for example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 69
+
+ \section1 prompt(question)
+
+ Displays the specified \e question, and returns a value read from stdin.
+
+ \section1 quote(string)
+
+ Converts a whole \e string into a single entity and returns the result.
+ Newlines, carriage returns, and tabs can be specified in the string
+ with \\n \\r and \\t. The return value does not contain either single
+ or double quotation marks unless you explicitly include them yourself,
+ but will be placed into a single entry (for literal expansion).
+
+ \section1 replace(string, old_string, new_string)
+
+ Replaces each instance of \c old_string with \c new_string in the
+ contents of the variable supplied as \c string. For example, the
+ code
+
+ \snippet doc/src/snippets/qmake/replace.pro 0
+
+ prints the message:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 70
+
+ \section1 sprintf(string, arguments...)
+
+ Replaces %1-%9 with the arguments passed in the comma-separated list
+ of function \e arguments and returns the processed string.
+
+ \section1 system(command)
+ [Conditional]
+
+ Executes the given \c command in a secondary shell, and succeeds
+ if the command returns with a zero exit status; otherwise fails.
+ You can check the return value of this function using a scope:
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 71
+
+ Alternatively, you can use this function to obtain stdout and stderr
+ from the command, and assign it to a variable. For example, you can
+ use this to interrogate information about the platform:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 72
+
+ \target unique
+ \section1 unique(variablename)
+
+ This will return a list of values in variable that are unique (that is
+ with repetitive entries removed). For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 73
+
+ \section1 warning(string)
+
+ This function will always succeed, and will display the given
+ \e string to the user. message() is a synonym for warning().
+*/
+
+/*!
+ \page qmake-environment-reference.html
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Function Reference
+
+ \title Configuring qmake's Environment
+
+ \tableofcontents
+
+ \target Properties
+ \section1 Properties
+
+ \c qmake has a system of persistant information, this allows you to
+ \c set a variable in qmake once, and each time qmake is invoked this
+ value can be queried. Use the following to set a property in qmake:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 74
+
+ The appropriate variable and value should be substituted for
+ \c VARIABLE and \c VALUE.
+
+ To retrieve this information back from qmake you can do:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 75
+
+ \note \c{qmake -query} will only list variables that you have
+ previously set with \c{qmake -set VARIABLE VALUE}.
+
+ This information will be saved into a QSettings object (meaning it
+ will be stored in different places for different platforms). As
+ \c VARIABLE is versioned as well, you can set one value in an older
+ version of \c qmake, and newer versions will retrieve this value. However,
+ if you set \c VARIABLE for a newer version of \c qmake, the older version
+ will not use this value. You can however query a specific version of a
+ variable if you prefix that version of \c qmake to \c VARIABLE, as in
+ the following example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 76
+
+ \c qmake also has the notion of \c builtin properties, for example you can
+ query the installation of Qt for this version of \c qmake with the
+ \c QT_INSTALL_PREFIX property:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 77
+
+ These built-in properties cannot have a version prefixed to them as
+ they are not versioned, and each version of \c qmake will have its own
+ built-in set of these values. The list below outlines the built-in
+ properties:
+
+ \list
+ \o \c QT_INSTALL_PREFIX - Where the version of Qt this qmake is built for resides
+ \o \c QT_INSTALL_DATA - Where data for this version of Qt resides
+ \o \c QMAKE_VERSION - The current version of qmake
+ \endlist
+
+ Finally, these values can be queried in a project file with a special
+ notation such as:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 78
+
+ \target QMAKESPEC
+ \section1 QMAKESPEC
+
+ \c qmake requires a platform and compiler description file which
+ contains many default values used to generate appropriate Makefiles.
+ The standard Qt distribution comes with many of these files, located
+ in the \c mkspecs subdirectory of the Qt installation.
+
+ The \c QMAKESPEC environment variable can contain any of the following:
+
+ \list
+ \o A complete path to a directory containing a \c{qmake.conf} file.
+ In this case \c qmake will open the \c{qmake.conf} file from within that
+ directory. If the file does not exist, \c qmake will exit with an
+ error.
+ \o The name of a platform-compiler combination. In this case, \c qmake
+ will search in the directory specified by the \c mkspecs subdirectory
+ of the data path specified when Qt was compiled (see
+ QLibraryInfo::DataPath).
+ \endlist
+
+ \bold{Note:} The \c QMAKESPEC path will automatically be added to the
+ \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH} system variable.
+
+ \target INSTALLS
+ \section1 INSTALLS
+
+ It is common on Unix to also use the build tool to install applications
+ and libraries; for example, by invoking \c{make install}. For this reason,
+ \c qmake has the concept of an install set, an object which contains
+ instructions about the way part of a project is to be installed.
+ For example, a collection of documentation files can be described in the
+ following way:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 79
+
+ The \c path member informs \c qmake that the files should be installed in
+ \c /usr/local/program/doc (the path member), and the \c files member
+ specifies the files that should be copied to the installation directory.
+ In this case, everything in the \c docs directory will be coped to
+ \c /usr/local/program/doc.
+
+ Once an install set has been fully described, you can append it to the
+ install list with a line like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 80
+
+ \c qmake will ensure that the specified files are copied to the installation
+ directory. If you require greater control over this process, you can also
+ provide a definition for the \c extra member of the object. For example,
+ the following line tells \c qmake to execute a series of commands for this
+ install set:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 81
+
+ The \c unix scope
+ (see \l{qmake Advanced Usage#Scopes and Conditions}{Scopes and Conditions})
+ ensures that these particular commands are only executed on Unix platforms.
+ Appropriate commands for other platforms can be defined using other scope
+ rules.
+
+ Commands specified in the \c extra member are executed before the instructions
+ in the other members of the object are performed.
+
+ If you append a built-in install set to the \c INSTALLS variable and do
+ not specify \c files or \c extra members, \c qmake will decide what needs to
+ be copied for you. Currently, the only supported built-in install set is
+ \c target:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 82
+
+ In the above lines, \c qmake knows what needs to be copied, and will handle
+ the installation process automatically.
+
+ \target cache
+ \section1 Cache File
+
+ The cache file is a special file \c qmake reads to find settings not specified
+ in the \c qmake.conf file, project files, or at the command line. If
+ \c -nocache is not specified when \c qmake is run, it will try to find a file
+ called \c{.qmake.cache} in parent directories of the current directory. If
+ it fails to find this file, it will silently ignore this step of processing.
+
+ \target LibDepend
+ \section1 Library Dependencies
+
+ Often when linking against a library, \c qmake relies on the underlying
+ platform to know what other libraries this library links against, and
+ lets the platform pull them in. In many cases, however, this is not
+ sufficent. For example, when statically linking a library, no other
+ libraries are linked to, and therefore no dependencies to those
+ libraries are created. However, an application that later links
+ against this library will need to know where to find the symbols that
+ the static library will require. To help with this situation, \c qmake
+ attempts to follow a library's dependencies where appropriate, but
+ this behavior must be explicitly enabled by following two steps.
+
+ The first step is to enable dependency tracking in the library itself.
+ To do this you must tell \c qmake to save information about the library:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 83
+
+ This is only relevant to the \c lib template, and will be ignored for
+ all others. When this option is enabled, \c qmake will create a file
+ ending in .prl which will save some meta-information about the
+ library. This metafile is just like an ordinary project file, but only
+ contains internal variable declarations. You are free to view this file
+ and, if it is deleted, \c qmake will know to recreate it when necessary,
+ either when the project file is later read, or if a dependent library
+ (described below) has changed. When installing this library, by
+ specifying it as a target in an \c INSTALLS declaration, \c qmake will
+ automatically copy the .prl file to the installation path.
+
+ The second step in this process is to enable reading of this meta
+ information in the applications that use the static library:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 84
+
+ When this is enabled, \c qmake will process all libraries linked to
+ by the application and find their meta-information. \c qmake will use
+ this to determine the relevant linking information, specifically adding
+ values to the application project file's list of \c DEFINES as well as
+ \c LIBS. Once \c qmake has processed this file, it will then look through
+ the newly introduced libraries in the \c LIBS variable, and find their
+ dependent .prl files, continuing until all libraries have been resolved.
+ At this point, the Makefile is created as usual, and the libraries are
+ linked explicitlyy against the application.
+
+ The internals of the .prl file are left closed so they can easily
+ change later. They are not designed to be changed by hand, should only
+ be created by \c qmake, and should not be transferred between operating
+ systems as they may contain platform-dependent information.
+
+ \target Extensions
+ \section1 File Extensions
+
+ Under normal circumstances \c qmake will try to use appropriate file extensions
+ for your platform. However, it is sometimes necessary to override the default
+ choices for each platform and explicitly define file extensions for \c qmake to use.
+ This is achieved by redefining certain built-in variables; for example the extension
+ used for \l moc files can be redefined with the following assignment in a project
+ file:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 85
+
+ The following variables can be used to redefine common file extensions recognized
+ by \c qmake:
+
+ \list
+ \o QMAKE_EXT_MOC - This modifies the extension placed on included moc files.
+ \o QMAKE_EXT_UI - This modifies the extension used for designer UI files (usually
+ in \c FORMS).
+ \o QMAKE_EXT_PRL - This modifies the extension placed on
+ \l{#LibDepend}{library dependency files}.
+ \o QMAKE_EXT_LEX - This changes the suffix used in files (usually in \c LEXSOURCES).
+ \o QMAKE_EXT_YACC - This changes the suffix used in files (usually in \c YACCSOURCES).
+ \o QMAKE_EXT_OBJ - This changes the suffix used on generated object files.
+ \endlist
+
+ All of the above accept just the first value, so you must assign to it just one
+ value that will be used throughout your project file. There are two variables that
+ accept a list of values:
+
+ \list
+ \o QMAKE_EXT_CPP - Causes \c qmake to interpret all files with these suffixes as
+ C++ source files.
+ \o QMAKE_EXT_H - Causes \c qmake to interpret all files with these suffixes as
+ C and C++ header files.
+ \endlist
+
+ \target Customizing
+ \section1 Customizing Makefile Output
+
+ \c qmake tries to do everything expected of a cross-platform build tool.
+ This is often less than ideal when you really need to run special
+ platform-dependent commands. This can be achieved with specific instructions
+ to the different \c qmake backends.
+
+ Customization of the Makefile output is performed through an object-style
+ API as found in other places in \c qmake. Objects are defined automatically
+ by specifying their members; for example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 86
+
+ The definitions above define a \c qmake target called \c mytarget, containing
+ a Makefile target called \c{.buildfile} which in turn is generated with
+ the \c touch command. Finally, the \c{.depends} member specifies that
+ \c mytarget depends on \c mytarget2, another target that is defined afterwards.
+ \c mytarget2 is a dummy target; it is only defined to echo some text to
+ the console.
+
+ The final step is to instruct \c qmake that this object is a target to be built:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 87
+
+ This is all you need to do to actually build custom targets. Of course, you may
+ want to tie one of these targets to the
+ \l{qmake Variable Reference#TARGET}{qmake build target}. To do this, you simply need to
+ include your Makefile target in the list of
+ \l{qmake Variable Reference#PRE_TARGETDEPS}{PRE_TARGETDEPS}.
+
+ The following tables are an overview of the options available to you with the QMAKE_EXTRA_TARGETS
+ variable.
+
+ \table
+ \header
+ \o Member
+ \o Description
+ \row
+ \o commands
+ \o The commands for generating the custom build target.
+ \row
+ \o CONFIG
+ \o Specific configuration options for the custom build target. See the CONFIG table for details.
+ \row
+ \o depends
+ \o The existing build targets that the custom build target depends on.
+ \row
+ \o recurse
+ \o Specifies which sub-targets should used when creating the rules in the Makefile to call in
+ the sub-target specific Makefile. This is only used when \c recursive is set in the CONFIG.
+ \row
+ \o recurse_target
+ \o Specifies the target that should be built via the sub-target Makefile for the rule in the Makefile.
+ This adds something like $(MAKE) -f Makefile.[subtarget] [recurse_target]. This is only used when
+ \c recursive is set in the CONFIG.
+ \row
+ \o target
+ \o The file being created by the custom build target.
+ \endtable
+
+ List of members specific to the CONFIG option:
+
+ \table
+ \header
+ \o Member
+ \o Description
+ \row
+ \o recursive
+ \o Indicates that rules should be created in the Makefile and thus call
+ the relevant target inside the sub-target specific Makefile. This defaults to creating
+ an entry for each of the sub-targets.
+ \endtable
+
+ For convenience, there is also a method of customizing projects
+ for new compilers or preprocessors:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 88
+
+ With the above definitions, you can use a drop-in replacement for moc if one
+ is available. The commands is executed on all arguments given to the
+ \c NEW_HEADERS variable (from the \c input member), and the result is written
+ to the file defined by the \c output member; this file is added to the
+ other source files in the project.
+ Additionally, \c qmake will execute \c depend_command to generate dependency
+ information, and place this information in the project as well.
+
+ These commands can easily be placed into a cache file, allowing subsequent
+ project files to add arguments to \c NEW_HEADERS.
+
+ The following tables are an overview of the options available to you with the QMAKE_EXTRA_COMPILERS
+ variable.
+
+ \table
+ \header
+ \o Member
+ \o Description
+ \row
+ \o commands
+ \o The commands used for for generating the output from the input.
+ \row
+ \o CONFIG
+ \o Specific configuration options for the custom compiler. See the CONFIG table for details.
+ \row
+ \o depend_command
+ \o Specifies a command used to generate the list of dependencies for the output.
+ \row
+ \o dependency_type
+ \o Specifies the type of file the output is, if it is a known type (such as TYPE_C,
+ TYPE_UI, TYPE_QRC) then it is handled as one of those type of files.
+ \row
+ \o depends
+ \o Specifies the dependencies of the output file.
+ \row
+ \o input
+ \o The variable that contains the files that should be processed with the custom compiler.
+ \row
+ \o name
+ \o A description of what the custom compiler is doing. This is only used in some backends.
+ \row
+ \o output
+ \o The filename that is created from the custom compiler.
+ \row
+ \o output_function
+ \o Specifies a custom qmake function that is used to specify the filename to be created.
+ \row
+ \o variables
+ \o Indicates that the variables specified here are replaced with $(QMAKE_COMP_VARNAME) when refered to
+ in the pro file as $(VARNAME).
+ \row
+ \o variable_out
+ \o The variable that the files created from the output should be added to.
+ \endtable
+
+ List of members specific to the CONFIG option:
+
+ \table
+ \header
+ \o Member
+ \o Description
+ \row
+ \o combine
+ \o Indicates that all of the input files are combined into a single output file.
+ \row
+ \o target_predeps
+ \o Indicates that the output should be added to the list of PRE_TARGETDEPS.
+ \row
+ \o explicit_dependencies
+ \o The dependencies for the output only get generated from the depends member and from
+ nowhere else.
+ \row
+ \o no_link
+ \o Indicates that the output should not be added to the list of objects to be linked in
+ \endtable
+*/
+
+/*!
+ \page qmake-advanced-usage.html
+ \title qmake Advanced Usage
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Platform Notes
+ \nextpage Using Precompiled Headers
+
+ Many \c qmake project files simply describe the sources and header files used
+ by the project, using a list of \c{name = value} and \c{name += value}
+ definitions. \c qmake also provides other operators, functions, and scopes
+ that can be used to process the information supplied in variable declarations.
+ These advanced features allow Makefiles to be generated for multiple platforms
+ from a single project file.
+
+ \tableofcontents
+
+ \section1 Operators
+
+ In many project files, the assignment (\c{=}) and append (\c{+=}) operators can
+ be used to include all the information about a project. The typical pattern of
+ use is to assign a list of values to a variable, and append more values
+ depending on the result of various tests. Since \c qmake defines certain
+ variables using default values, it is sometimes necessary to use the removal
+ (\c{-=}) operator to filter out values that are not required. The following
+ operators can be used to manipulate the contents of variables.
+
+ The \c = operator assigns a value to a variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 89
+
+ The above line sets the \c TARGET variable to \c myapp. This will overwrite any
+ values previously set for \c TARGET with \c myapp.
+
+ The \c += operator appends a new value to the list of values in a variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 90
+
+ The above line appends \c QT_DLL to the list of pre-processor defines to be put
+ in the generated Makefile.
+
+ The \c -= operator removes a value from the list of values in a variable:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 91
+
+ The above line removes \c QT_DLL from the list of pre-processor defines to be
+ put in the generated Makefile.
+
+ The \c *= operator adds a value to the list of values in a variable, but only
+ if it is not already present. This prevents values from being included many
+ times in a variable. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 92
+
+ In the above line, \c QT_DLL will only be added to the list of pre-processor
+ defines if it is not already defined. Note that the
+ \l{qmake Function Reference#unique}{unique()}
+ function can also be used to ensure that a variables only contains one
+ instance of each value.
+
+ The \c ~= operator replaces any values that match a regular expression with
+ the specified value:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 93
+
+ In the above line, any values in the list that start with \c QT_D or \c QT_T are
+ replaced with \c QT.
+
+ The \c $$ operator is used to extract the contents of a variable, and can be
+ used to pass values between variables or supply them to functions:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 94
+
+ \target Scopes
+ \section1 Scopes
+
+ Scopes are similar to \c if statements in procedural programming languages.
+ If a certain condition is true, the declarations inside the scope are processed.
+
+ \section2 Syntax
+
+ Scopes consist of a condition followed by an opening brace on the same line,
+ a sequence of commands and definitions, and a closing brace on a new line:
+
+ \snippet doc/src/snippets/qmake/scopes.pro syntax
+
+ The opening brace \e{must be written on the same line as the condition}.
+ Scopes may be concatenated to include more than one condition; see below
+ for examples.
+
+ \section2 Scopes and Conditions
+
+ A scope is written as a condition followed by a series of declarations
+ contained within a pair of braces; for example:
+
+ \snippet doc/src/snippets/qmake/scopes.pro 0
+
+ The above code will add the \c paintwidget_win.cpp file to the sources listed
+ in the generated Makefile if \c qmake is used on a Windows platform.
+ If \c qmake is used on a platform other than Windows, the define will be
+ ignored.
+
+ The conditions used in a given scope can also be negated to provide an
+ alternative set of declarations that will be processed only if the
+ original condition is false. For example, suppose we want to process
+ something on all platforms \e except for Windows. We can achieve this by
+ negating the scope like this:
+
+ \snippet doc/src/snippets/qmake/scopes.pro 1
+
+ Scopes can be nested to combine more than one condition. For instance, if
+ you want to include a particular file for a certain platform only if
+ debugging is enabled then you write the following:
+
+ \snippet doc/src/snippets/qmake/scopes.pro 2
+
+ To save writing many nested scopes, you can nest scopes using the \c :
+ operator. The nested scopes in the above example can be rewritten in
+ the following way:
+
+ \snippet doc/src/snippets/qmake/scopes.pro 3
+
+ You may also use the \c : operator to perform single line conditional
+ assignments; for example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 95
+
+ The above line adds \c QT_DLL to the \c DEFINES variable only on the
+ Windows platform.
+ Generally, the \c : operator behaves like a logical AND operator, joining
+ together a number of conditions, and requiring all of them to be true.
+
+ There is also the \c | operator to act like a logical OR operator, joining
+ together a number of conditions, and requiring only one of them to be true.
+
+ \snippet doc/src/snippets/qmake/scopes.pro 4
+
+ You can also provide alternative declarations to those within a scope by
+ using an \c else scope. Each \c else scope is processed if the conditions
+ for the preceding scopes are false.
+ This allows you to write complex tests when combined with other scopes
+ (separated by the \c : operator as above). For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 96
+
+ \section2 Configuration and Scopes
+
+ The values stored in the
+ \l{qmake-project-files.html#GeneralConfiguration}{\c CONFIG variable}
+ are treated specially by \c qmake. Each of the possible values can be
+ used as the condition for a scope. For example, the list of values
+ held by \c CONFIG can be extended with the \c opengl value:
+
+ \snippet doc/src/snippets/qmake/configscopes.pro 0
+
+ As a result of this operation, any scopes that test for \c opengl will
+ be processed. We can use this feature to give the final executable an
+ appropriate name:
+
+ \snippet doc/src/snippets/qmake/configscopes.pro 1
+ \snippet doc/src/snippets/qmake/configscopes.pro 2
+ \snippet doc/src/snippets/qmake/configscopes.pro 3
+
+ This feature makes it easy to change the configuration for a project
+ without losing all the custom settings that might be needed for a specific
+ configuration. In the above code, the declarations in the first scope are
+ processed, and the final executable will be called \c application-gl.
+ However, if \c opengl is not specified, the declarations in the second
+ scope are processed instead, and the final executable will be called
+ \c application.
+
+ Since it is possible to put your own values on the \c CONFIG
+ line, this provides you with a convenient way to customize project files
+ and fine-tune the generated Makefiles.
+
+ \section2 Platform Scope Values
+
+ In addition to the \c win32, \c macx, and \c unix values used in many
+ scope conditions, various other built-in platform and compiler-specific
+ values can be tested with scopes. These are based on platform
+ specifications provided in Qt's \c mkspecs directory. For example, the
+ following lines from a project file show the current specification in
+ use and test for the \c linux-g++ specification:
+
+ \snippet doc/src/snippets/qmake/specifications.pro 0
+
+ You can test for any other platform-compiler combination as long as a
+ specification exists for it in the \c mkspecs directory.
+
+ \section1 Variables
+
+ Many of the variables used in project files are special variables that
+ \c qmake uses when generating Makefiles, such as \c DEFINES, \c SOURCES,
+ and \c HEADERS. It is possible for you to create variables for your own
+ use; \c qmake creates new variables with a given name when it encounters
+ an assignment to that name. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 97
+
+ There are no restricitions on what you do to your own variables, as \c
+ qmake will ignore them unless it needs to evaluate them when processing
+ a scope.
+
+ You can also assign the value of a current variable to another
+ variable by prefixing $$ to the variable name. For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 98
+
+ Now the MY_DEFINES variable contains what is in the DEFINES variable at
+ this point in the project file. This is also equivalent to:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 99
+
+ The second notation allows you to append the contents of the variable to
+ another value without separating the two with a space. For example, the
+ following will ensure that the final executable will be given a name
+ that includes the project template being used:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 100
+
+ Variables can be used to store the contents of environment variables.
+ These can be evaluated at the time that \c qmake is run, or included
+ in the generated Makefile for evaluation when the project is built.
+
+ To obtain the contents of an environment value when \c qmake is run,
+ use the \c $$(...) operator:
+
+ \snippet doc/src/snippets/qmake/environment.pro 0
+
+ In the above assignment, the value of the \c PWD environment variable
+ is read when the project file is processed.
+
+ To obtain the contents of an environment value at the time when the
+ generated Makefile is processed, use the \c $(...) operator:
+
+ \snippet doc/src/snippets/qmake/environment.pro 1
+
+ In the above assignment, the value of \c PWD is read immediately
+ when the project file is processed, but \c $(PWD) is assigned to
+ \c DESTDIR in the generated Makefile. This makes the build process
+ more flexible as long as the environment variable is set correctly
+ when the Makefile is processed.
+
+ The special \c $$[...] operator can be used to access various
+ configuration options that were set when Qt was built:
+
+ \snippet doc/src/snippets/qmake/qtconfiguration.pro 0
+
+ The variables accessible with this operator are typically used to
+ enable third party plugins and components to be integrated with Qt.
+ For example, a \QD plugin can be installed alongside \QD's built-in
+ plugins if the following declaration is made in its project file:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 101
+
+ \target VariableProcessingFunctions
+ \section1 Variable Processing Functions
+
+ \c qmake provides a selection of built-in functions to allow the
+ contents of variables to be processed. These functions process the
+ arguments supplied to them and return a value, or list of values, as
+ a result. In order to assign a result to a variable, it is necessary
+ to use the \c $$ operator with this type of function in the same way
+ used to assign contents of one variable to another:
+
+ \snippet doc/src/snippets/qmake/functions.pro 1
+
+ This type of function should be used on the right-hand side of
+ assignments (i.e, as an operand).
+
+ It is possible to define your own functions for processing the
+ contents of variables. These functions can be defined in the following
+ way:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 102
+
+ The following example function takes a variable name as its only
+ argument, extracts a list of values from the variable with the
+ \l{qmake-function-reference.html}{eval()} built-in function,
+ and compiles a list of files:
+
+ \snippet doc/src/snippets/qmake/replacefunction.pro 0
+
+ \target ConditionalFunctions
+ \section1 Conditional Functions
+
+ \c qmake provides built-in functions that can be used as conditions
+ when writing scopes. These functions do not return a value, but
+ instead indicate "success" or "failure":
+
+ \snippet doc/src/snippets/qmake/functions.pro 3
+
+ This type of function should be used in conditional expressions
+ only.
+
+ It is possible to define your own functions to provide conditions
+ for scopes. The following example tests whether each file in a list
+ exists and returns true if they all exist, or false if not:
+
+ \snippet doc/src/snippets/qmake/testfunction.pro 0
+
+ \section1 Adding New Configuration Features
+
+ \c qmake lets you create your own \e features that can be included in
+ project files by adding their names to the list of values specified by
+ the \c CONFIG variable. Features are collections of custom functions and
+ definitions in \c{.prf} files that can reside in one of many standard
+ directories. The locations of these directories are defined in a number
+ of places, and \c qmake checks each of them in the following order when
+ it looks for \c{.prf} files:
+
+ \list 1
+ \o In a directory listed in the \c QMAKEFEATURES environment variable;
+ this contains a colon-separated list of directories.
+ \o In a directory listed in the \c QMAKEFEATURES property variable; this
+ contains a colon-spearated list of directories.
+ \omit
+ \o In a features directory beneath the project's root directory (where
+ the \c{.qmake.cache} file is generated).
+ \endomit
+ \o In a features directory residing within a \c mkspecs directory.
+ \c mkspecs directories can be located beneath any of the directories
+ listed in the \c QMAKEPATH environment variable (a colon-separated list
+ of directories). (\c{$QMAKEPATH/mkspecs/<features>})
+ \o In a features directory residing beneath the directory provided by the
+ \c QMAKESPEC environment variable. (\c{$QMAKESPEC/<features>})
+ \o In a features directory residing in the \c data_install/mkspecs directory.
+ (\c{data_install/mkspecs/<features>})
+ \o In a features directory that exists as a sibling of the directory
+ specified by the \c QMAKESPEC environment variable.
+ (\c{$QMAKESPEC/../<features>})
+ \endlist
+
+ The following features directories are searched for features files:
+
+ \list 1
+ \o \c{features/unix}, \c{features/win32}, or \c{features/macx}, depending on
+ the platform in use
+ \o \c features/
+ \endlist
+
+ For example, consider the following assignment in a project file:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 103
+
+ With this addition to the \c CONFIG variable, \c qmake will search the
+ locations listed above for the \c myfeatures.prf file after it has
+ finished parsing your project file. On Unix systems, it will look for
+ the following file:
+
+ \list 1
+ \o \c $QMAKEFEATURES/myfeatures.prf (for each directory listed in the
+ \c QMAKEFEATURES environment variable)
+ \o \c $$QMAKEFEATURES/myfeatures.prf (for each directory listed in the
+ \c QMAKEFEATURES property variable)
+ \o \c myfeatures.prf (in the project's root directory)
+ \o \c $QMAKEPATH/mkspecs/features/unix/myfeatures.prf and
+ \c $QMAKEPATH/mkspecs/features/myfeatures.prf (for each directory
+ listed in the \c QMAKEPATH environment variable)
+ \o \c $QMAKESPEC/features/unix/myfeatures.prf and
+ \c $QMAKESPEC/features/myfeatures.prf
+ \o \c data_install/mkspecs/features/unix/myfeatures.prf and
+ \c data_install/mkspecs/features/myfeatures.prf
+ \o \c $QMAKESPEC/../features/unix/myfeatures.prf and
+ \c $QMAKESPEC/../features/myfeatures.prf
+ \endlist
+
+ \note The \c{.prf} files must have names in lower case.
+
+
+*/
+
+/*!
+ \page qmake-precompiledheaders.html
+ \title Using Precompiled Headers
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Advanced Usage
+ \nextpage qmake Reference
+ \ingroup buildsystem
+
+ \target Introduction
+
+ Precompiled headers are a performance feature supported by some
+ compilers to compile a stable body of code, and store the compiled
+ state of the code in a binary file. During subsequent compilations,
+ the compiler will load the stored state, and continue compiling the
+ specified file. Each subsequent compilation is faster because the
+ stable code does not need to be recompiled.
+
+ \c qmake supports the use of precompiled headers (PCH) on some
+ platforms and build environments, including:
+ \list
+ \o Windows
+ \list
+ \o nmake
+ \o Dsp projects (VC 6.0)
+ \o Vcproj projects (VC 7.0 \& 7.1)
+ \endlist
+ \o Mac OS X
+ \list
+ \o Makefile
+ \o Xcode
+ \endlist
+ \o Unix
+ \list
+ \o GCC 3.4 and above
+ \endlist
+ \endlist
+
+ \target ADD_PCH
+ \section1 Adding Precompiled Headers to Your Project
+
+ \target PCH_CONTENTS
+ \section2 Contents of the Precompiled Header File
+
+ The precompiled header must contain code which is \e stable
+ and \e static throughout your project. A typical PCH might look
+ like this:
+
+ \section3 Example: \c stable.h
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 104
+
+ Note that a precompiled header file needs to separate C includes from
+ C++ includes, since the precompiled header file for C files may not
+ contain C++ code.
+
+ \target PROJECT_OPTIONS
+ \section2 Project Options
+
+ To make your project use PCH, you only need to define the
+ \c PRECOMPILED_HEADER variable in your project file:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 105
+
+ \c qmake will handle the rest, to ensure the creation and use of the
+ precompiled header file. You do not need to include the precompiled
+ header file in \c HEADERS, as \c qmake will do this if the configuration
+ supports PCH.
+
+ All platforms that support precompiled headers have the configuration
+ option \c precompile_header set. Using this option, you may trigger
+ conditional blocks in your project file to add settings when using PCH.
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 106
+
+ \section1 Notes on Possible Issues
+
+ On some platforms, the file name suffix for precompiled header files is
+ the same as that for other object files. For example, the following
+ declarations may cause two different object files with the same name to
+ be generated:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 107
+
+ To avoid potential conflicts like these, it is good practice to ensure
+ that header files that will be precompiled are given distinctive names.
+
+ \target EXAMPLE_PROJECT
+ \section1 Example Project
+
+ You can find the following source code in the
+ \c{examples/qmake/precompile} directory in the Qt distribution:
+
+ \section2 \c mydialog.ui
+
+ \quotefromfile examples/qmake/precompile/mydialog.ui
+ \printuntil
+
+ \section2 \c stable.h
+
+ \snippet examples/qmake/precompile/stable.h 0
+
+ \section2 \c myobject.h
+
+ \snippet examples/qmake/precompile/myobject.h 0
+
+ \section2 \c myobject.cpp
+
+ \snippet examples/qmake/precompile/myobject.cpp 0
+
+ \section2 \c util.cpp
+
+ \snippet examples/qmake/precompile/util.cpp 0
+
+ \section2 \c main.cpp
+
+ \snippet examples/qmake/precompile/main.cpp 0
+
+ \section2 \c precompile.pro
+
+ \snippet examples/qmake/precompile/precompile.pro 0
+*/
+
+/*!
+ \page qmake-tutorial.html
+ \title qmake Tutorial
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Manual
+ \nextpage qmake Common Projects
+
+ This tutorial teaches you how to use \c qmake. We recommend that
+ you read the \c qmake user guide after completing this tutorial.
+
+ \section1 Starting off Simple
+
+ Let's assume that you have just finished a basic implementation of
+ your application, and you have created the following files:
+
+ \list
+ \o hello.cpp
+ \o hello.h
+ \o main.cpp
+ \endlist
+
+ You will find these files in the \c{examples/qmake/tutorial} directory
+ of the Qt distribution. The only other thing you know about the setup of
+ the application is that it's written in Qt. First, using your favorite
+ plain text editor, create a file called \c hello.pro in
+ \c{examples/qmake/tutorial}. The first thing you need to do is add the
+ lines that tell \c qmake about the source and header files that are part
+ of your development project.
+
+ We'll add the source files to the project file first. To do this you
+ need to use the \l{qmake Variable Reference#SOURCES}{SOURCES} variable.
+ Just start a new line with \c {SOURCES +=} and put hello.cpp after it.
+ You should have something like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 108
+
+ We repeat this for each source file in the project, until we end up
+ with the following:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 109
+
+ If you prefer to use a Make-like syntax, with all the files listed in
+ one go you can use the newline escaping like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 110
+
+ Now that the source files are listed in the project file, the header
+ files must be added. These are added in exactly the same way as source
+ files, except that the variable name we use is
+ \l{qmake Variable Reference#HEADERS}{HEADERS}.
+
+ Once you have done this, your project file should look something like
+ this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 111
+
+ The target name is set automatically; it is the same as the project
+ file, but with the suffix appropriate to the platform. For example, if
+ the project file is called \c hello.pro, the target will be \c hello.exe
+ on Windows and \c hello on Unix. If you want to use a different name
+ you can set it in the project file:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 112
+
+ The final step is to set the \l{qmake Variable Reference#CONFIG}{CONFIG}
+ variable. Since this is a Qt application, we need to put \c qt on the
+ \c CONFIG line so that \c qmake will add the relevant libraries to be
+ linked against and ensure that build lines for \c moc and \c uic are
+ included in the generated Makefile.
+
+ The finished project file should look like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 113
+
+ You can now use \c qmake to generate a Makefile for your application.
+ On the command line, in your project's directory, type the following:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 114
+
+ Then type \c make or \c nmake depending on the compiler you use.
+
+ For Visual Studio users, \c qmake can also generate \c .dsp or
+ \c .vcproj files, for example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 115
+
+ \section1 Making an Application Debuggable
+
+ The release version of an application doesn't contain any debugging
+ symbols or other debugging information. During development it is useful
+ to produce a debugging version of the application that has the
+ relevant information. This is easily achieved by adding \c debug to the
+ \c CONFIG variable in the project file.
+
+ For example:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 116
+
+ Use \c qmake as before to generate a Makefile and you will be able to
+ obtain useful information about your application when running it in
+ a debugging environment.
+
+ \section1 Adding Platform-Specific Source Files
+
+ After a few hours of coding, you might have made a start on the
+ platform-specific part of your application, and decided to keep the
+ platform-dependent code separate. So you now have two new files to
+ include into your project file: \c hellowin.cpp and \c
+ hellounix.cpp. We can't just add these to the \c SOURCES
+ variable since this will put both files in the Makefile. So, what we
+ need to do here is to use a scope which will be processed depending on
+ which platform \c qmake is run on.
+
+ A simple scope that will add in the platform-dependent file for
+ Windows looks like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 117
+
+ So if \c qmake is run on Windows, it will add \c hellowin.cpp to the
+ list of source files. If \c qmake is run on any other platform, it
+ will simply ignore it. Now all that is left to be done is to create a
+ scope for the Unix-specific file.
+
+ When you have done that, your project file should now look
+ something like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 118
+
+ Use \c qmake as before to generate a Makefile.
+
+ \section1 Stopping qmake If a File Doesn't Exist
+
+ You may not want to create a Makefile if a certain file doesn't exist.
+ We can check if a file exists by using the exists() function. We can
+ stop \c qmake from processing by using the error() function. This
+ works in the same way as scopes do. Simply replace the scope condition
+ with the function. A check for a \c main.cpp file looks like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 119
+
+ The \c{!} symbol is used to negate the test; i.e. \c{exists( main.cpp )}
+ is true if the file exists, and \c{!exists( main.cpp )} is true if the
+ file doesn't exist.
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 120
+
+ Use \c qmake as before to generate a makefile. If you rename \c
+ main.cpp temporarily, you will see the message and \c qmake will stop
+ processing.
+
+ \section1 Checking for More than One Condition
+
+ Suppose you use Windows and you want to be able to see statement
+ output with qDebug() when you run your application on the command line.
+ Unless you build your application with the appropriate console setting,
+ you won't see the output. We can easily put \c console on the \c CONFIG
+ line so that on Windows the makefile will have this setting. However,
+ let's say that we only want to add the \c CONFIG line if we are running
+ on Windows \e and when \c debug is already on the \c CONFIG line.
+ This requires using two nested scopes; just create one scope, then create
+ the other inside it. Put the settings to be processed inside the last
+ scope, like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 121
+
+ Nested scopes can be joined together using colons, so the final
+ project file looks like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 122
+
+ That's it! You have now completed the tutorial for \c qmake, and are
+ ready to write project files for your development projects.
+*/
+
+/*!
+ \page qmake-common-projects.html
+ \title qmake Common Projects
+ \contentspage {qmake Manual}{Contents}
+ \previouspage qmake Tutorial
+ \nextpage Using qmake
+
+ This chapter describes how to set up \c qmake project files for three
+ common project types that are based on Qt. Although all kinds of
+ projects use many of the same variables, each of them use project-specific
+ variables to customize output files.
+
+ Platform-specific variables are not described here; we refer the reader to
+ the \l{Deploying Qt Applications} document for information on issues such as
+ \l{Deploying an Application on Mac OS X#Architecture Dependencies}{building
+ universal binaries for Mac OS X} and
+ \l{Deploying an Application on Windows#Visual Studio 2005 Onwards}
+ {handling Visual Studio manifest files}.
+
+ \tableofcontents
+
+ \target Application
+ \section1 Building an Application
+
+ \section2 The app Template
+
+ The \c app template tells \c qmake to generate a Makefile that will build
+ an application. With this template, the type of application can be specified
+ by adding one of the following options to the \c CONFIG variable definition:
+
+ \table
+ \header \o Option \o Description
+ \row \o windows \o The application is a Windows GUI application.
+ \row \o console \o \c app template only: the application is a Windows console
+ application.
+ \endtable
+
+ When using this template the following \c qmake system variables are recognized.
+ You should use these in your .pro file to specify information about your
+ application.
+
+ \list
+ \o HEADERS - A list of all the header files for the application.
+ \o SOURCES - A list of all the source files for the application.
+ \o FORMS - A list of all the .ui files (created using \c{Qt Designer})
+ for the application.
+ \o LEXSOURCES - A list of all the lex source files for the application.
+ \o YACCSOURCES - A list of all the yacc source files for the application.
+ \o TARGET - Name of the executable for the application. This defaults
+ to the name of the project file. (The extension, if any, is added
+ automatically).
+ \o DESTDIR - The directory in which the target executable is placed.
+ \o DEFINES - A list of any additional pre-processor defines needed for the application.
+ \o INCLUDEPATH - A list of any additional include paths needed for the application.
+ \o DEPENDPATH - The dependency search path for the application.
+ \o VPATH - The search path to find supplied files.
+ \o DEF_FILE - Windows only: A .def file to be linked against for the application.
+ \o RC_FILE - Windows only: A resource file for the application.
+ \o RES_FILE - Windows only: A resource file to be linked against for the application.
+ \endlist
+
+ You only need to use the system variables that you have values for,
+ for instance, if you don't have any extra INCLUDEPATHs then you don't
+ need to specify any, \c qmake will add in the default ones needed.
+ For instance, an example project file might look like this:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 123
+
+ For items that are single valued, e.g. the template or the destination
+ directory, we use "="; but for multi-valued items we use "+=" to \e
+ add to the existing items of that type. Using "=" replaces the item's
+ value with the new value, for example if we wrote \c{DEFINES=QT_DLL},
+ all other definitions would be deleted.
+
+ \target Library
+ \section1 Building a Library
+
+ \section2 The lib Template
+
+ The \c lib template tells \c qmake to generate a Makefile that will
+ build a library. When using this template, in addition to the system variables
+ mentioned above for the \c app template the \c VERSION variable is
+ supported. You should use these in your .pro file to specify
+ information about the library.
+
+ When using the \c lib template, the following options can be added to the
+ \c CONFIG variable to determine the type of library that is built:
+
+ \table
+ \header \o Option \o Description
+ \row \o dll \o The library is a shared library (dll).
+ \row \o staticlib \o The library is a static library.
+ \row \o plugin \o The library is a plugin; this also enables the dll option.
+ \endtable
+
+ The following option can also be defined to provide additional information about
+ the library.
+
+ \list
+ \o VERSION - The version number of the target library, for example, 2.3.1.
+ \endlist
+
+ The target file name for the library is platform-dependent. For example, on
+ X11 and Mac OS X, the library name will be prefixed by \c lib; on Windows,
+ no prefix is added to the file name.
+
+ \target Plugin
+ \section1 Building a Plugin
+
+ Plugins are built using the \c lib template, as described in the previous
+ section. This tells \c qmake to generate a Makefile for the project that will
+ build a plugin in a suitable form for each platform, usually in the form of a
+ library. As with ordinary libraries, the \c VERSION variable is used to specify
+ information about the plugin.
+
+ \list
+ \o VERSION - The version number of the target library, for example, 2.3.1.
+ \endlist
+
+ \section2 Building a Qt Designer Plugin
+
+ \QD plugins are built using a specific set of configuration settings that
+ depend on the way Qt was configured for your system. For convenience, these
+ settings can be enabled by adding \c designer to the project's \c CONFIG
+ variable. For example:
+
+ \snippet examples/designer/worldtimeclockplugin/worldtimeclockplugin.pro 0
+
+ See the \l{Qt Examples#Qt Designer}{Qt Designer examples} for more
+ examples of plugin-based projects.
+
+ \section1 Building and Installing in Debug and Release Modes
+
+ Sometimes, it is necessary to build a project in both debug and release
+ modes. Although the \c CONFIG variable can hold both \c debug and \c release
+ options, the \c debug option overrides the \c release option.
+
+ \section2 Building in Both Modes
+
+ To enable a project to be built in both modes, you must add the
+ \c debug_and_release option to your project's \c CONFIG definition:
+
+ \snippet doc/src/snippets/qmake/debug_and_release.pro 0
+ \snippet doc/src/snippets/qmake/debug_and_release.pro 1
+
+ The scope in the above snippet modifies the build target in each mode to
+ ensure that the resulting targets have different names. Providing different
+ names for targets ensures that one will not overwrite the other.
+
+ When \c qmake processes the project file, it will generate a Makefile rule
+ to allow the project to be built in both modes. This can be invoked in the
+ following way:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 124
+
+ The \c build_all option can be added to the \c CONFIG variable in the
+ project file to ensure that the project is built in both modes by default:
+
+ \snippet doc/src/snippets/qmake/debug_and_release.pro 2
+
+ This allows the Makefile to be processed using the default rule:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 125
+
+ \section2 Installing in Both Modes
+
+ The \c build_all option also ensures that both versions of the target
+ will be installed when the installation rule is invoked:
+
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 126
+
+ It is possible to customize the names of the build targets depending on
+ the target platform. For example, a library or plugin may be named using a
+ different convention on Windows to the one used on Unix platforms:
+
+ \omit
+ Note: This was originally used in the customwidgetplugin.pro file, but is
+ no longer needed there.
+ \endomit
+ \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 127
+
+ The default behavior in the above snippet is to modify the name used for
+ the build target when building in debug mode. An \c else clause could be
+ added to the scope to do the same for release mode; left as it is, the
+ target name remains unmodified.
+*/
+