Updated WebKit from /home/jturcott/dev/webkit/ to qtwebkit-4.6-snapshot-20091003 ( 8f810287200d21aded375664cc0a6ac0476dbdea )

Changes in WebKit/qt since the last update:

++ b/WebKit/qt/ChangeLog
2009-10-29  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Tor Arne Vestbø.

        Remove QWebView::guessUrlFromString() and replace its use
        with the new QUrl::fromUserInput() if using Qt 4.6 or newer.

        * Api/qwebview.cpp:
        * Api/qwebview.h:
        * QGVLauncher/main.cpp:
        (urlFromUserInput):
        (WebPage::applyProxy):
        (MainWindow::load):
        * QtLauncher/main.cpp:
        (urlFromUserInput):
        (MainWindow::MainWindow):
        (MainWindow::changeLocation):
        * tests/qwebview/tst_qwebview.cpp:

2009-10-28  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Tor Arne Vestbø.

        Serialize directly to the stream, and not first to an QByteArray,
        that is later serialized. That is slower and also uses more bytes.

        * Api/qwebhistory.cpp:
        (operator<<):
        (operator>>):

2009-10-28  Shinichiro Hamaji  <hamaji@chromium.org>

        Reviewed by Eric Seidel.

        [Qt] WebFrame::counterValueForElementById must not be exposed
        https://bugs.webkit.org/show_bug.cgi?id=30882

        * Api/qwebframe.cpp:
        (qt_drt_counterValueForElementById):
        * Api/qwebframe.h:

2009-10-27  Shinichiro Hamaji  <hamaji@chromium.org>

        Reviewed by Darin Adler.

        Provide a way to get counter values with layoutTestContoller
        https://bugs.webkit.org/show_bug.cgi?id=30555

        * Api/qwebframe.cpp:
        (QWebFrame::counterValueForElementById):
        (QWebHitTestResult::frame):
        * Api/qwebframe.h:

2009-10-28  Antonio Gomes  <tonikitoo@webkit.org>

        Pushing missing WebKit/qt/tests/qwebframe/resources/ dir from bug 29248.

        [Qt] [API] Make it possible to have 'invisible' loads
        https://bugs.webkit.org/show_bug.cgi?id=29248

        * tests/qwebframe/resources/image2.png: Copied from WebKit/qt/tests/qwebelement/image.png.

2009-10-28  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Tor Arne Vestbø.

        [Qt] QWebHistory::saveState() is inconsistent with the Qt API
        https://bugs.webkit.org/show_bug.cgi?id=30710

        Make the versioning internal and enforce it in the WebCore
        part. Adjust the comments, as well as remove now dead code.

        * Api/qwebhistory.cpp:
        (operator<<):
        (operator>>):
        * Api/qwebhistory.h:

2009-10-28  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Holger Freyther.

        [Qt] QWebHistory::saveState() is inconsistent with the Qt API
        https://bugs.webkit.org/show_bug.cgi?id=30710

        Remove the QWebHistory::saveState() and ::restoreState() as
        they are inconsistent with the Qt API.

        Update unittests to reflect the change.

        * Api/qwebhistory.cpp:
        (operator<<):
        (operator>>):
        * Api/qwebhistory.h:
        * tests/qwebhistory/tst_qwebhistory.cpp:
        (saveHistory):
        (restoreHistory):
        (tst_QWebHistory::saveAndRestore_crash_1):
        (tst_QWebHistory::saveAndRestore_crash_2):
        (tst_QWebHistory::saveAndRestore_crash_3):
        (tst_QWebHistory::clear):

2009-10-27  Antonio Gomes  <tonikitoo@webkit.org>

        Reviewed by Holger Freyther.

        Complementary fix to bug 30779.

        By mistake I used QWeakPointer's toStrongRef() method which docs
        explicitly say to not be used in this situation (when the tracked
        pointer is devired from QObject). Instead QWeakPointer's data()
        is recommended.

        * Api/qwebpage.cpp:
        (QWebPage::view):

2009-10-27  Holger Hans Peter Freyther  <zecke@selfish.org>

        Reviewed by Simon Fraser.

        Change HitTestResult methods to use (3d) transformation aware methods
        https://bugs.webkit.org/show_bug.cgi?id=27347

        The HitTestResult::boundingBox method was removed. The
        RenderObject must be used directly. In contrast to the
        old HitTestResult::boundingBox method this code must use
        a (3d) transformation aware method to not run into an
        assert in SVGRenderBase::mapLocalToContainer.

        * Api/qwebframe.cpp:
        (QWebHitTestResultPrivate::QWebHitTestResultPrivate):

2009-10-27  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Rubberstamped by Oliver Hunt.

        Change two methods to be internal for DRT use only.

        Part of [Qt] Review all new API in Qt 4.6
        https://bugs.webkit.org/show_bug.cgi?id=29843#c11

        * Api/qwebsecurityorigin.cpp:
        (qt_drt_whiteListAccessFromOrigin):
        (qt_drt_resetOriginAccessWhiteLists):
        (QWebSecurityOrigin::localSchemes):
        * Api/qwebsecurityorigin.h:

2009-10-27  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Tor Arne Vestbø.

        Make sure that initiating a rotation while rotating won't make
        it end up at rotation positions that are not a multiply of
        180 degrees.

        * QGVLauncher/main.cpp:
        (MainView::animatedFlip):

2009-10-27  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Unreviewed Qt build fix.

        Update the tests as well to the new API change.

        * tests/qwebelement/tst_qwebelement.cpp:
        (tst_QWebElement::clear):

2009-10-27  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Rubberstamped by Tor Arne Vestbø.

        [Qt] QWebElement::removeChildren() should be
        QWebElement::removeAllChildren()
        https://bugs.webkit.org/show_bug.cgi?id=30630

        * Api/qwebelement.cpp:
        (QWebElement::removeAllChildren):
        * Api/qwebelement.h:

2009-10-27  Antonio Gomes  <tonikitoo@webkit.org>

        Reviewed by Antti Koivisto and Holger Freyther.

        Make QWebPagePrivate's (QWidget) view to be a QWeakPointer.
        https://bugs.webkit.org/show_bug.cgi?id=30779

        The fact that it was been set from external objects of qwebpage
        and not being deleted internally can lead to dangling references.

        * Api/qgraphicswebview.cpp:
        (QGraphicsWebView::~QGraphicsWebView):
        * Api/qwebpage.cpp:
        (QWebPagePrivate::QWebPagePrivate):
        (QWebPagePrivate::createContextMenu):
        (QWebPagePrivate::handleSoftwareInputPanel):
        (QWebPagePrivate::keyPressEvent):
        (QWebPage::setView):
        (QWebPage::view):
        (QWebPage::javaScriptAlert):
        (QWebPage::javaScriptConfirm):
        (QWebPage::javaScriptPrompt):
        (QWebPage::shouldInterruptJavaScript):
        (QWebPage::createWindow):
        (QWebPage::extension):
        (QWebPage::chooseFile):
        (QWebPage::userAgentForUrl):
        * Api/qwebpage_p.h:
        * Api/qwebview.cpp:
        (QWebView::~QWebView):

2009-10-26  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Unreviewed documentation fix from David Boddie (Qt Doc Team)

        Removes the check around the RenderHints property documentation
        that was clearly added to synchronize the source and header files
        when the #if !defined(Q_OS_SYMBIAN) guards was added to the
        property.

        The documentation has also been updated to ensure that Symbian
        users know that there is no actual RenderHints property on their
        platform.

        * Api/qwebview.cpp:

2009-10-26  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Unreviewed documentation fix from David Boddie (Qt Doc Team)

        Ensure that qdoc will always see the RenderHints property.

        The property was only defined in the header file if the Q_OS_SYMBIAN
        symbol was not defined, resulting in the property not showing up
        in the Qt documentation just because one platform doesn't support it.

        A follow up commit will improve the documentation for the property
        and note that it is not supported on the Symbiam platform.

        * Api/qwebview.h:

2009-10-26  Benjamin Poulain  <benjamin.poulain@nokia.com>

        Reviewed by Tor Arne Vestbø.

        [Qt] Reintroduce QWebElementCollection

        Revert the patch that has replaced QWebElementCollection
        with QList<QWebElement>. Update the tests accordingly.

        Remove the constness of the return type of QWebElement operator[].

        https://bugs.webkit.org/show_bug.cgi?id=30767

        * Api/qwebelement.cpp:
        (QWebElement::findAll):
        (QWebElementCollectionPrivate::QWebElementCollectionPrivate):
        (QWebElementCollectionPrivate::create):
        (QWebElementCollection::QWebElementCollection):
        (QWebElementCollection::operator=):
        (QWebElementCollection::~QWebElementCollection):
        (QWebElementCollection::operator+):
        (QWebElementCollection::append):
        (QWebElementCollection::count):
        (QWebElementCollection::at):
        (QWebElementCollection::toList):
        * Api/qwebelement.h:
        (const_iterator::begin):
        (const_iterator::end):
        (const_iterator::operator[]):
        * Api/qwebframe.cpp:
        (QWebFrame::findAllElements):
        * Api/qwebframe.h:
        * QtLauncher/main.cpp:
        (MainWindow::selectElements):
        * tests/qwebelement/tst_qwebelement.cpp:
        (tst_QWebElement::simpleCollection):
        (tst_QWebElement::iteration):
        (tst_QWebElement::emptyCollection):
        (tst_QWebElement::appendCollection):
        (tst_QWebElement::nullSelect):
        (tst_QWebElement::hasSetFocus):
        (tst_QWebElement::render):
        * tests/qwebpage/tst_qwebpage.cpp:
        (tst_QWebPage::inputMethods):

2009-10-24  Laszlo Gombos  <laszlo.1.gombos@nokia.com>

        Reviewed by Holger Freyther.

        [Qt] [Symbian] Set the capability and memory required to run QtWebKit for Symbian
        https://bugs.webkit.org/show_bug.cgi?id=30476

        Assign ReadUserData WriteUserData NetworkServices Symbian capabilities
        to all QtWebkit executables.

        * QGVLauncher/QGVLauncher.pro:
        * QtLauncher/QtLauncher.pro:
        * tests/benchmarks/loading/tst_loading.pro:
        * tests/benchmarks/painting/tst_painting.pro:
        * tests/qgraphicswebview/qgraphicswebview.pro:
        * tests/qwebelement/qwebelement.pro:
        * tests/qwebframe/qwebframe.pro:
        * tests/qwebhistory/qwebhistory.pro:
        * tests/qwebhistoryinterface/qwebhistoryinterface.pro:
        * tests/qwebpage/qwebpage.pro:
        * tests/qwebplugindatabase/qwebplugindatabase.pro:
        * tests/qwebview/qwebview.pro:

2009-10-22  Gavin Barraclough  <barraclough@apple.com>

        Reviewed by NOBODY (speculative build fix - qt is currently already broken!)
        Build fix following bug #30696.

        * Api/qwebelement.cpp:
        (setupScriptContext):
        * Api/qwebframe.cpp:
        (QWebFrame::evaluateJavaScript):

2009-10-22  Shu Chang  <Chang.Shu@nokia.com>

        Reviewed by Eric Seidel.

        [Qt] Enable track visited links in QWebPage
        https://bugs.webkit.org/show_bug.cgi?id=30574

        Test: fast/history/clicked-link-is-visited.html

        * Api/qwebpage.cpp:
        (QWebPagePrivate::QWebPagePrivate):

2009-10-22  Girish Ramakrishnan  <girish@forwardbias.in>

        Reviewed by Eric Seidel.

        [Qt] Add Print Shortcut to QtLauncher

        https://bugs.webkit.org/show_bug.cgi?id=30682

        * QtLauncher/main.cpp:
        (MainWindow::setupUI):

2009-10-22  Antonio Gomes  <tonikitoo@webkit.org>

        Rubberstamped by Tor Arne Vestbø.

        Code standarlization for QGVLauncher.

        1) Made member initilization lists in constructors
           to be per line.
        2) Made applyProxy method inline as all other methods in
           WebPage class.

        * QGVLauncher/main.cpp:
        (WebPage::WebPage):
        (WebPage::applyProxy):
        (MainView::MainView):
        (MainWindow::MainWindow):
        (MainWindow::init):

2009-10-22  Antonio Gomes  <tonikitoo@webkit.org>

        Reviewed by Tor Arne Vestbø.

        Add a Y-Axis rotation to QGVLauncher.

        It uses the QStateMachine API from Qt 4.6.

        * QGVLauncher/main.cpp:
        (WebView::WebView):
        (WebView::setYRotation):
        (WebView::yRotation):
        (MainView::flip):
        (MainView::animatedYFlip):
        (SharedScene::SharedScene):
        (SharedScene::webView):
        (MainWindow::init):
        (MainWindow::animatedYFlip):
        (MainWindow::buildUI):

2009-10-20  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed By Adam Barth.

        Add some actions to the menu for cursor debugging.

        GraphicsView based launcher only.

        * QGVLauncher/main.cpp:
        (MainView::setWaitCursor):
        (MainView::resetCursor):
        (MainView::flip):
        (MainWindow::setWaitCursor):
        (MainWindow::resetCursor):
        (MainWindow::buildUI):

2009-10-20  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Rubberstamped by Adam Barth.

        Remove clipRenderToViewport as agreed upon in
        https://bugs.webkit.org/show_bug.cgi?id=29843

        * Api/qwebframe.cpp:
        * Api/qwebframe.h:
        * Api/qwebframe_p.h:
        (QWebFramePrivate::QWebFramePrivate):

2009-10-20  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Adam Barth.

        Update the tests to test the new render functionality, and take
        into consideration that render() clips to the frame itself as well
        as the viewport.

        QWebFrame::render() now always clips, so the old tests were bogus.

        Rendering pure contents (no scrollbars etc) without clipping can now
        be accomplished using QWebFrame::documentElement()->render(...)

        * Api/qwebframe.cpp:
        * Api/qwebframe.h:
        * Api/qwebframe_p.h:
        (QWebFramePrivate::QWebFramePrivate):
        * tests/qwebframe/tst_qwebframe.cpp:

2009-10-20  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Rubberstamped by Adam Barth.

        As we do not support rendering a QWebFrame without it being clipped
        the the frame as well as the viewport, we now set the viewport size
        to the size of the contents.

        Rendering pure contents (no scrollbars etc) without clipping can be
        acomplished using QWebFrame::documentElement()->render(...)

        * tests/qwebelement/tst_qwebelement.cpp:
        (tst_QWebElement::render):

2009-10-20  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Tor Arne Vestbø.

        Add menu item to dump the plugin list to the console,
        which can be handy for debugging.

        * QtLauncher/main.cpp:
        (MainWindow::dumpPlugins):
        (MainWindow::setupUI):

2009-10-19  Kenneth Rohde Christiansen  <kenneth@webkit.org>

        Reviewed by Tor Arne Vestbø.

        Introduce new render method on QWebFrame, which supports specifying
        which layers to render (scrollbars, contents, pan-icon).

        * Api/qwebframe.cpp:
        (QWebFramePrivate::renderPrivate):
        (QWebFrame::render):
        * Api/qwebframe.h:
        * Api/qwebframe_p.h:

2009-10-19  Antonio Gomes  <tonikitoo@webkit.org>

        Reviewed by Ariya Hidayat.

        [Qt] Infinite loop (leading to crash) when setting cursor in QGraphicsWebView
        https://bugs.webkit.org/show_bug.cgi?id=30549

        Patch reimplements QGraphicsItem's itemChange method, and make
        CursorChange event to be emitted after cursor has already been
        set.

        QWidget::setCursor send the event just after it sets the cursor,
        then patch makes both behaviors compatible.

        * Api/qgraphicswebview.cpp:
        (QGraphicsWebView::itemChange):
        * Api/qgraphicswebview.h:

0 files changed, 0 insertions, 0 deletions