Merge branch '4.6' of scm.dev.nokia.troll.no:qt/qt

Conflicts:
	mkspecs/common/symbian/symbian.conf
	qmake/generators/makefile.cpp
	qmake/generators/symbian/symmake.cpp
	src/3rdparty/webkit/WebCore/WebCore.pro

Conflict resolution was heavily based on manual application of commit
9cc4ae77a73bd28ff495f36f26dd87c78b76b976.

15 files changed, 126 insertions, 105 deletions

diff --git a/doc/src/deployment/deployment.qdoc b/doc/src/deployment/deployment.qdoc
index 8ba106c..bf0bc74 100644
--- a/doc/src/deployment/deployment.qdoc
+++ b/doc/src/deployment/deployment.qdoc
@@ -963,14 +963,14 @@
 
     \title Deploying an Application on Mac OS X
 
-    Starting with version 4.5, Qt now includes a \l {macdeploy}{deployment tool}
-    that automates the prodecures described in this document.
-
-    This documentation will describe how to create a bundle, and how
-    to make sure that the application will find the resources it needs
-    at run-time. We will demonstrate the procedures in terms of
-    deploying the \l {tools/plugandpaint}{Plug & Paint} application
-    that is provided in Qt's examples directory.
+    Beginning with Qt 4.5, a \l {macdeploy}{deployment tool} is
+    included that automates the prodecures described here.
+
+    This document describes how to create a bundle and how to make
+    sure that the application will find the resources it needs at
+    run-time. We demonstrate the procedures in terms of deploying the
+    \l {tools/plugandpaint}{Plug & Paint} application that is provided
+    in Qt's examples directory.
     
     \tableofcontents
 
@@ -1380,63 +1380,38 @@
 
     \section2 Mac OS X Version Dependencies
 
-    Qt 4.2 has been designed to be built and deployed on Mac OS X 10.3
-    up until the current version as of this writing, Mac OS X 10.4 and
-    all their minor releases. Qt achieves this by using "weak
-    linking." This means that Qt tests if a function added in newer
-    versions of Mac OS X is available on the computer it is running on
-    before it uses it. This results in getting access to newer
-    features when running on newer versions of OS X while still
-    remaining compatible on older versions.
+    From Qt 4.6, Mac OS X 10.3 (Panther) is no longer supported.  Qt
+    4.6 applications can be built and deployed on Mac OS X 10.4
+    (Tiger) and higher. This is achieved using \e{weak linking}. In
+    \e{weak linking}, Qt tests whether a function added in a newer
+    version of Mac OS X is available on the computer it is running
+    on. This allows Qt to use newer features, when it runs on a newer
+    version of OS X, while remaining compatible on the older versions.
 
     For more information about cross development issues on Mac OS X,
     see \l
     {http://developer.apple.com/documentation/DeveloperTools/Conceptual/cross_development/index.html}{Apple's Developer Website}.
 
-    Since the linker is set to be compatible with all OS X version, you have to
-    change the \c MACOSX_DEPLOYMENT_TARGET environment variable to get weak
-    linking to work for your application. You can add:
+    Since the linker is set to be compatible with all OS X versions,
+    you must change the \c MACOSX_DEPLOYMENT_TARGET environment
+    variable to get \e{weak linking} to work for your application. You
+    can add:
 
     \snippet doc/src/snippets/code/doc_src_deployment.qdoc 51
 
-    to your .pro file and qmake will take care of this for you.
-
-    However, there is a bit of a wrinkle to keep in mind when your are
-    deploying. Mac OS X 10.4 ("Tiger") ships GCC 4.0 as its default
-    compiler. This is also the GCC compiler we use for building the
-    binary Qt package. If you use GCC 4.0 to build your application,
-    it will link against a dynamic libstdc++ that is only available on
-    Mac OS X 10.4 and Mac OS X 10.3.9.  The application will refuse to
-    run on older versions of the operating system.
+    to your .pro file, and qmake will take care of this for you.
 
     For more information about C++ runtime environment, see \l
     {http://developer.apple.com/documentation/DeveloperTools/Conceptual/CppRuntimeEnv/index.html}{Apple's Developer Website}
 
-    If you want to deploy to versions of Mac OS X earlier than 10.3.9,
-    you must build with GCC 3.3 which is the default on Mac OS X
-    10.3. GCC 3.3 is also available on the Mac OS X 10.4 "Xcode Tools"
-    CD and as a download for earlier versions of Mac OS X from Apple
-    (\l {https://connect.apple.com/}{connect.apple.com}). You can use
-    Apple's \c gcc_select(1) command line tool to switch the default
-    complier on your system.
-
     \section3 Deploying Phonon Applications on Mac OS X
 
     \list
-        \o If you build your Phonon application on Tiger, it will work on
-           Tiger, Leopard and Panther.
-        \o If you build your application on Leopard, it will \bold not work
-        on Panther unless you rename the libraries with the following command
-        after you have built your application:
 
-        \snippet doc/src/snippets/code/doc_src_deployment.qdoc 51a
+        \o If you build your Qt 4.6 Phonon application on OS X 10.4
+           (Tiger), it will run on OS X 10.4 and higher.
 
-        This command must be invoked in the directory where
-        \c{libphonon_qt7.dylib} is located, usually in 
-        \c{yourapp.app/Contents/plugins/phonon_backend/}.
-        \o The \l {macdeploy}{deployment tool} will perform this step for you.
-
-        \o If you are using Leopard, but would like to build your application
+        \o If you are using Leopard but would like to build your application
         against Tiger, you can use:
 
         \snippet doc/src/snippets/code/doc_src_deployment.qdoc 51b
@@ -1444,12 +1419,13 @@
 
     \section2 Architecture Dependencies
 
-    The Qt for Mac OS X libraries, tools, and examples can be built "universal"
-    (i.e. they run natively on both Intel and PowerPC machines).  This
-    is accomplished by passing \c -universal on the \c configure line
-    of the source package, and requires that you use GCC 4.0.x. On
-    PowerPC hardware you will need to pass the universal SDK as a
-    command line argument to the Qt configure command. For example:
+    The Qt for Mac OS X libraries, tools, and examples can be built
+    "universal" (i.e. they run natively on both Intel and PowerPC
+    machines).  This is accomplished by passing \c -universal on the
+    \c configure line of the source package, and requires that you use
+    GCC 4.0.x. On PowerPC hardware you will need to pass the universal
+    SDK as a command line argument to the Qt configure command. For
+    example:
 
     \snippet doc/src/snippets/code/doc_src_deployment.qdoc 52
 
@@ -1573,33 +1549,35 @@
     By default \c .pkg file generated by \c qmake adds support for all
     S60 3rd edition FP1, S60 3rd edition FP2 and S60 5th edition devices.
 
-    As a last step we will embed the \c qt_installer.sis file to the Wiggly
-    deployment file:
-
-    \snippet doc/src/snippets/code/doc_src_deployment.qdoc 58
-
-    When \c qt_installer.sis is embedded to the application deployment file, the
-    end-user does not need to download and install all dependencies separately.
-    The drawback of \c .sis embedding is that the application \c .sis file size becomes
-    big. To address these problems Forum Nokia is planning to release a smart installer
-    which will take care of downloading and installing the necessary dependencies
-    over-the-air. The expected availability of smart installer is 1Q 2010.
-
     Now we are ready to compile the application and create the application
     deployment file. Run \c qmake to create Symbian specific makefiles, resources (\.rss)
     and deployment packaging files (\c .pkg). And do build to create the
     application binaries and resources.
 
-    \snippet doc/src/snippets/code/doc_src_deployment.qdoc 59
+    \snippet doc/src/snippets/code/doc_src_deployment.qdoc 58
 
     If everything compiled and linked without any errors, we are now ready to create
-    an application installation file:
+    an application installation package (\c wiggly_installer.sis).
+
+    If you haven't done so already, download the latest release of the Smart Installer
+    from \l{http://get.qt.nokia.com/nokiasmartinstaller/}, and install it on top of the Qt package
+
+    Then use this command to create the installer sis package:
+
+    \snippet doc/src/snippets/code/doc_src_deployment.qdoc 59
+
+    If all binaries and dependencies were found, you should now have a self signed
+    \c wiggly_installer.sis ready to be installed on a device. The smart installer
+    contained in the in the installer package will download the necessary dependencies
+    such as Qt libraries to the device.
 
-    \snippet doc/src/snippets/code/doc_src_deployment.qdoc 60
+    \note If you want to have your application properly Symbian Signed for distribution,
+    you will have to properly sign both the application and the application installer packages.
+    Please see
+    \l{http://developer.symbian.org/wiki/index.php/Category:Symbian_Signed}
+    {Symbian Signed wiki} for more information about Symbian Signed.
 
-    If all binaries and dependencies were found, we should now have a self-signed
-    \c wiggly_release-gcce.sis ready to be installed on a device. For more information
-    about creating a \c .sis file and installing it to device see also
+    For more information about creating a \c .sis file and installing it to device see also
     \l {The Symbian platform - Introduction to Qt#Installing your own applications}{here}.
 
 */
diff --git a/doc/src/development/qmake-manual.qdoc b/doc/src/development/qmake-manual.qdoc
index 0172cf2..e66cd71 100644
--- a/doc/src/development/qmake-manual.qdoc
+++ b/doc/src/development/qmake-manual.qdoc
@@ -1431,6 +1431,18 @@ is the application private directory on the drive it is installed to.
     
     \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 141
     
+    On the Symbian platform, you can use \c{DEPLOYMENT.installer_header}
+    variable to generate smart installer wrapper for your application.
+    If you specify just UID of the installer package as the value, then
+    installer package name and version will be autogenerated:
+
+    \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 146
+
+    If autogenerated values are not suitable, you can also specify the sis
+    header yourself using this variable:
+
+    \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 147
+
     \target DEPLOYMENT_PLUGIN
     \section1 DEPLOYMENT_PLUGIN
 
diff --git a/doc/src/examples/svgalib.qdoc b/doc/src/examples/svgalib.qdoc
index 9142112..cf6512c 100644
--- a/doc/src/examples/svgalib.qdoc
+++ b/doc/src/examples/svgalib.qdoc
@@ -43,6 +43,9 @@
     \example qws/svgalib
     \title Accelerated Graphics Driver Example
 
+    \warning This example was designed to work with Qt 4.4 and will not work
+    with current versions of Qt. It will be removed from Qt 4.7.
+
     The Accelerated Graphics Driver example shows how you can write
     your own accelerated graphics driver and \l {add your graphics
     driver to Qt for Embedded Linux}.  In \l{Qt for Embedded Linux},
diff --git a/doc/src/getting-started/examples.qdoc b/doc/src/getting-started/examples.qdoc
index 6b4ec61..0c18773 100644
--- a/doc/src/getting-started/examples.qdoc
+++ b/doc/src/getting-started/examples.qdoc
@@ -406,7 +406,7 @@
     \clearfloat
     \section1 \l{D-Bus Examples}{D-Bus}
     \beginfloatleft
-    \l{D-Bus Examples}{\inlineimage qt-embedded-examples.png
+    \l{D-Bus Examples}{\inlineimage dbus-examples.png
     }
 
     \endfloat
@@ -416,7 +416,7 @@
     \clearfloat
     \section1 \l{Qt for Embedded Linux Examples}{Qt for Embedded Linux}
     \beginfloatleft
-    \l{Qt for Embedded Linux Examples}{\inlineimage dbus-examples.png
+    \l{Qt for Embedded Linux Examples}{\inlineimage qt-embedded-examples.png
     }
 
     \endfloat
diff --git a/doc/src/getting-started/installation.qdoc b/doc/src/getting-started/installation.qdoc
index 5f95c5a..561cc07 100644
--- a/doc/src/getting-started/installation.qdoc
+++ b/doc/src/getting-started/installation.qdoc
@@ -677,7 +677,7 @@ If you are using pre-built binaries, follow the instructions given in the
 
         \snippet doc/src/snippets/code/doc_src_installation.qdoc 30
 
-        This will create a self-signed \c fluidlauncher_armv5_urel.sis and
+        This will create a self-signed \c fluidlauncher.sis and
         install it to your device.
 
         To run the demos on the emulator simply navigate to the directory of the demo
@@ -1023,9 +1023,11 @@ If you are using pre-built binaries, follow the instructions given in the
               See \l{http://pepper.troll.no/s60prereleases/patches/}{here} for instructions how to check your
               compiler version and how to patch it, if needed.
            \endlist
-        \o \l{http://downloads.activestate.com/ActivePerl/Windows/5.6/ActivePerl-5.6.1.638-MSWin32-x86.msi}{ActivePerl v5.6.1 build 638}
+        \o \l{http://downloads.activestate.com/ActivePerl/releases}{ActivePerl 5.6.1 build 638 or higher}
            \list
-           \o \bold{Note:} According to Symbian, version 5.6.1 build 638 is mandatory. Using later versions may result in unexplained errors.
+           \o \bold{Note:} According to Symbian, version 5.6.1 build 638 is mandatory for building Symbian applications,
+              but that version is no longer available from ActiveState. However, Qt for Symbian has been successfully
+              compiled using both 5.8.x and 5.10.x versions.
            \endlist
         \o \l{http://www.forum.nokia.com/main/resources/tools_and_sdks/S60SDK/}{S60 Platform SDK 3rd Edition FP1 or higher}
            \list
@@ -1038,8 +1040,9 @@ If you are using pre-built binaries, follow the instructions given in the
            \list
            \o \bold{Note:} This is not required if you are using pre-built binary package.
            \endlist
-        \o Building Qt libraries requires \l{http://www.arm.com/products/DevTools/RVCT.html}{RVCT} 2.2 [build 686] or later,
-           which is not available free of charge.
+        \o Building Qt libraries requires \l{http://www.arm.com/products/DevTools/RVCT.html}{RVCT} version 2.2 (build 686 or later),
+           which is not available free of charge.  Usage of later versions of RVCT, including the 3.x and 4.x series, is not supported
+           in this release.
     \endlist
 
     Running Qt on real device requires the Open C to be installed on the device.
diff --git a/doc/src/getting-started/known-issues.qdoc b/doc/src/getting-started/known-issues.qdoc
index 5503ab9..b73e15d 100644
--- a/doc/src/getting-started/known-issues.qdoc
+++ b/doc/src/getting-started/known-issues.qdoc
@@ -52,7 +52,7 @@
     on the Qt website.
 
     An overview of known issues may also be found at:
-    \l{http://qt.gitorious.org/qt/pages/Qt460KnownIssues}
+    \l{http://qt.gitorious.org/qt/pages/QtKnownIssues}
     {Known Issues Wiki}.
 
     \section1 Installation Issues
@@ -160,6 +160,6 @@
 
     \list
     \o  Check known issues for Symbian at
-    \l{http://qt.gitorious.org/qt/pages/Qt460KnownIssues} {Known Issues Wiki}.
+    \l{http://qt.gitorious.org/qt/pages/QtKnownIssues} {Known Issues Wiki}.
     \endlist
 */
diff --git a/doc/src/images/qpainter-text.png b/doc/src/images/qpainter-text.png
index af7821c..e95c965 100644
--- a/doc/src/images/qpainter-text.png
+++ b/doc/src/images/qpainter-text.png
diff --git a/doc/src/platforms/emb-install.qdoc b/doc/src/platforms/emb-install.qdoc
index c13fbef..623ba89 100644
--- a/doc/src/platforms/emb-install.qdoc
+++ b/doc/src/platforms/emb-install.qdoc
@@ -84,7 +84,9 @@
     Before building the \l{Qt for Embedded Linux} library, run the \c
     ./configure script to configure the library for your development
     architecture. You can list all of the configuration system's
-    options by typing \c {./configure -help}.
+    options by typing
+
+    \snippet doc/src/snippets/code/doc_src_emb-install.qdoc embedded help
 
     Note that by default, \l{Qt for Embedded Linux} is configured for
     installation in the \c{/usr/local/Trolltech/QtEmbedded-%VERSION%}
diff --git a/doc/src/platforms/platform-notes.qdoc b/doc/src/platforms/platform-notes.qdoc
index 6ea3df4..f513181 100644
--- a/doc/src/platforms/platform-notes.qdoc
+++ b/doc/src/platforms/platform-notes.qdoc
@@ -293,6 +293,9 @@
 
     \section1 General Information
 
+    Qt 4.6 applications can only be deployed on Mac OS X 10.4 (Tiger)
+    and higher. 
+
     Qt 4.4 and Qt 4.5 development is only supported on Mac OS X 10.4 and up.
     Applications built against these version of Qt can be deployed on Mac OS X
     10.3, but cannot be developed on that version of the operating system due
@@ -490,7 +493,7 @@
     \section1 Known Issues
 
     Known issues can be found by visiting the
-    \l{http://qt.gitorious.org/qt/pages/Qt460KnownIssues}{wiki page} with an
+    \l{http://qt.gitorious.org/qt/pages/QtKnownIssues}{wiki page} with an
     up-to-date list of known issues, and the list of bugs can be found by
     \l{http://bugreports.qt.nokia.com/browse/QTBUG/component/19171}{browsing} the
     S60 component in Qt's public task tracker, located at
diff --git a/doc/src/platforms/symbian-introduction.qdoc b/doc/src/platforms/symbian-introduction.qdoc
index 427f45a..5cebee3 100644
--- a/doc/src/platforms/symbian-introduction.qdoc
+++ b/doc/src/platforms/symbian-introduction.qdoc
@@ -127,6 +127,11 @@
     \row \o \c run           \o Run the application on the emulator.
     \row \o \c runonphone    \o Run the application on a device.
     \row \o \c sis           \o Create signed \c .sis file for project.
+    \row \o \c installer_sis \o Create signed \l{Smart Installer}{smart installer}
+                                \c .sis file for project.
+                                Smart installer will attempt to download
+                                missing dependencies in addition to
+                                just installing the application.
     \endtable
 
     The following lines perform a debug build for the emulator
@@ -137,6 +142,14 @@
     To work on your project in Carbide, simply import the \c .pro file
     by right clicking on the project explorer and executing "Import...".
 
+    \section2 Smart Installer
+
+    The Smart Installer makes sure that deployed applications have all the Qt dependencies
+    they need to run on a device.
+
+    Download the latest release of the Smart Installer from \l{http://get.qt.nokia.com/nokiasmartinstaller/},
+    and install it on top of the Qt package.
+
     \section1 Installing your own applications
 
     To install your own applications on hardware, you need a signed \c .sis file.
diff --git a/doc/src/snippets/code/doc_src_deployment.qdoc b/doc/src/snippets/code/doc_src_deployment.qdoc
index 7eb8808..3b0cda1 100644
--- a/doc/src/snippets/code/doc_src_deployment.qdoc
+++ b/doc/src/snippets/code/doc_src_deployment.qdoc
@@ -475,18 +475,10 @@ default_deployment.pkg_prerules += supported_platforms
 //! [57]
 
 //! [58]
-embedded_deployments = \
-    "; Embed Qt dependencies" \
-    "@\"$$[QT_INSTALL_PREFIX]/qt_installer.sis\",(0x2001E62D)"
-
-default_deployment.pkg_prerules += embedded_deployments
-//! [58]
-
-//! [59]
 qmake
 make release-gcce
-//! [59]
+//! [58]
 
-//! [60]
-make sis
-//! [60]
\ No newline at end of file
+//! [59]
+make installer_sis
+//! [59]
\ No newline at end of file
diff --git a/doc/src/snippets/code/doc_src_emb-install.qdoc b/doc/src/snippets/code/doc_src_emb-install.qdoc
index 60775d2..f24f087 100644
--- a/doc/src/snippets/code/doc_src_emb-install.qdoc
+++ b/doc/src/snippets/code/doc_src_emb-install.qdoc
@@ -41,18 +41,22 @@
 
 //! [0]
 cd <anywhere>
-gunzip qt-embedded-linux-commercial-src-%VERSION%.tar.gz
-tar xf qt-embedded-linux-commercial-src-%VERSION%.tar
+gunzip qt-everywhere-opensource-src-%VERSION%.tar.gz
+tar xf qt-everywhere-opensource-src-%VERSION%.tar
 //! [0]
 
 
 //! [1]
-~/qt-embedded-linux-commercial-src-%VERSION%
+~/qt-everywhere-opensource-src-%VERSION%
 //! [1]
 
 
+//! [embedded help]
+./configure -embedded -help
+//! [embedded help]
+
 //! [2]
-cd  ~/qt-embedded-linux-commercial-src-%VERSION%
+cd  ~/qt-everywhere-opensource-src-%VERSION%
 ./configure -embedded [architecture]
 //! [2]
 
diff --git a/doc/src/snippets/code/doc_src_qmake-manual.qdoc b/doc/src/snippets/code/doc_src_qmake-manual.qdoc
index b1cbc72..a48b53f 100644
--- a/doc/src/snippets/code/doc_src_qmake-manual.qdoc
+++ b/doc/src/snippets/code/doc_src_qmake-manual.qdoc
@@ -963,9 +963,9 @@ RSS_RULES += myrssrules
 //! [145]
 
 //! [146]
-BLD_INF_RULES.prj_exports += \
-    "$${LITERAL_HASH}include <platform_paths.hrh>" \
-    "rom/my.iby  APP_LAYER_PUBLIC_EXPORT_PATH(my.iby)" \
-    "inc/myheader.h mycomp/myheader.h" \
-    ":zip my_api.zip my_api"
+DEPLOYMENT.installer_header = 0x12345678
 //! [146]
+
+//! [147]
+DEPLOYMENT.installer_header = "$${LITERAL_HASH}{\"My Application Installer\"},(0x12345678),1,0,0"
+//! [147]
diff --git a/doc/src/snippets/code/src_gui_graphicsview_qgraphicsitem.cpp b/doc/src/snippets/code/src_gui_graphicsview_qgraphicsitem.cpp
index 483c675..4f27661 100644
--- a/doc/src/snippets/code/src_gui_graphicsview_qgraphicsitem.cpp
+++ b/doc/src/snippets/code/src_gui_graphicsview_qgraphicsitem.cpp
@@ -260,3 +260,14 @@ class CustomItem : public QGraphicsItem
    ...
 };
 //! [QGraphicsItem type]
+
+//! [18]
+class QGraphicsPathItem : public QAbstractGraphicsShapeItem
+{
+ public:
+  enum { Type = 2 };
+    int type() const { return Type; }
+  ...
+};
+//! [18]
+
diff --git a/doc/src/windows-and-dialogs/mainwindow.qdoc b/doc/src/windows-and-dialogs/mainwindow.qdoc
index ea8411f..6adfa75 100644
--- a/doc/src/windows-and-dialogs/mainwindow.qdoc
+++ b/doc/src/windows-and-dialogs/mainwindow.qdoc
@@ -51,7 +51,7 @@
 
     \nextpage The Application Main Window
 
-    A \l{Widgets}{widget} that is not embedded in a parent widget is called a window.
+    A \l{Widgets Tutorial}{widget} that is not embedded in a parent widget is called a window.
     Usually, windows have a frame and a title bar, although it is also possible to create
     windows without such decoration using suitable window flags). In Qt, QMainWindow
     and the various subclasses of QDialog are the most common window types.