Merge remote branch 'origin/master' into bearermanagement/unit-tests

Conflicts:
	src/network/access/qnetworkaccessmanager.cpp

66 files changed, 2608 insertions, 1120 deletions

diff --git a/doc/doc.pri b/doc/doc.pri
index 9d7d5da..0fc4d72 100644
--- a/doc/doc.pri
+++ b/doc/doc.pri
@@ -31,8 +31,14 @@ QT_DOCUMENTATION = ($$QDOC qt-api-only.qdocconf assistant.qdocconf designer.qdoc
                     $$GENERATOR doc-build/html-qml/qml.qhp -o doc/qch/qml.qch \
                )
 
+QT_ZH_CN_DOCUMENTATION = ($$QDOC qt-api-only_zh_CN.qdocconf) && \
+               (cd $$QT_BUILD_TREE && \
+                    $$GENERATOR doc-build/html-qt_zh_CN/qt.qhp -o doc/qch/qt_zh_CN.qch \
+               )
+
 win32-g++:isEmpty(QMAKE_SH) {
 	QT_DOCUMENTATION = $$replace(QT_DOCUMENTATION, "/", "\\\\")
+	QT_ZH_CN_DOCUMENTATION = $$replace(QT_ZH_CN_DOCUMENTATION, "/", "\\\\")
 }
 
 # Build rules:
@@ -43,6 +49,9 @@ qch_docs.depends += sub-tools
 
 docs.depends = adp_docs qch_docs
 
+docs_zh_CN.depends = docs
+docs_zh_CN.commands = $$QT_ZH_CN_DOCUMENTATION
+
 # Install rules
 htmldocs.files = $$QT_BUILD_TREE/doc/html
 htmldocs.path = $$[QT_INSTALL_DOCS]
@@ -55,5 +64,5 @@ qchdocs.CONFIG += no_check_exist
 docimages.files = $$QT_BUILD_TREE/doc/src/images
 docimages.path = $$[QT_INSTALL_DOCS]/src
 
-QMAKE_EXTRA_TARGETS += qdoc adp_docs qch_docs docs
+QMAKE_EXTRA_TARGETS += qdoc adp_docs qch_docs docs docs_zh_CN
 INSTALLS += htmldocs qchdocs docimages
diff --git a/doc/src/declarative/advtutorial.qdoc b/doc/src/declarative/advtutorial.qdoc
index 1456eae9..43dc81e 100644
--- a/doc/src/declarative/advtutorial.qdoc
+++ b/doc/src/declarative/advtutorial.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/advtutorial1.qdoc b/doc/src/declarative/advtutorial1.qdoc
index 86d14ad..9c6ea71 100644
--- a/doc/src/declarative/advtutorial1.qdoc
+++ b/doc/src/declarative/advtutorial1.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -55,8 +55,9 @@ This gives you a basic game window, with room for the game canvas. A new game
 button and room to display the score. The one thing you may not recognize here
 is the \l SystemPalette item. This item provides access to the Qt system palette
 and is used to make the button look more like a system button (for exact native
-feel you would use a \l QPushButton). Since we want a fully QML button, and QML does
-not include a button, we had to write our own. Below is the code which we wrote to do this:
+feel you would use a \l QPushButton). Since we want a fully functional button, 
+we use the QML elements Text and MouseRegion inside a Rectangle to assemble a 
+button. Below is the code which we wrote to do this:
 
 \snippet declarative/tutorials/samegame/samegame1/Button.qml 0
 
diff --git a/doc/src/declarative/advtutorial2.qdoc b/doc/src/declarative/advtutorial2.qdoc
index 2aa68f3..4fe10c1 100644
--- a/doc/src/declarative/advtutorial2.qdoc
+++ b/doc/src/declarative/advtutorial2.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/advtutorial3.qdoc b/doc/src/declarative/advtutorial3.qdoc
index e6e4e97..0c53e74 100644
--- a/doc/src/declarative/advtutorial3.qdoc
+++ b/doc/src/declarative/advtutorial3.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/advtutorial4.qdoc b/doc/src/declarative/advtutorial4.qdoc
index 855963c..ca3b82f 100644
--- a/doc/src/declarative/advtutorial4.qdoc
+++ b/doc/src/declarative/advtutorial4.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/anchor-layout.qdoc b/doc/src/declarative/anchor-layout.qdoc
index 2bd0ec5..ff47694 100644
--- a/doc/src/declarative/anchor-layout.qdoc
+++ b/doc/src/declarative/anchor-layout.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/animation.qdoc b/doc/src/declarative/animation.qdoc
index bf5907d..1acc111 100644
--- a/doc/src/declarative/animation.qdoc
+++ b/doc/src/declarative/animation.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -44,9 +44,9 @@
 \title QML Animation
 
 Animation in QML is done by animating properties of objects. Properties of type
-real, int, color, rect, point, and size can all be animated.
+real, int, color, rect, point, size, and vector3d can all be animated.
 
-QML supports three different forms of animation - basic property animation,
+QML supports three main forms of animation - basic property animation,
 transitions, and property behaviors.
 
 \tableofcontents
@@ -71,7 +71,6 @@ Rectangle {
         x: 60-img.width/2
         y: 0
         y: SequentialAnimation {
-            running: true
             repeat: true
             NumberAnimation { to: 200-img.height; easing: "easeOutBounce"; duration: 2000 }
             PauseAnimation { duration: 1000 }
@@ -84,8 +83,8 @@ Rectangle {
 \image propanim.gif
 
 When you assign an animation as a value source, you do not need to specify \c property
-or \c target; they are automatically selected for you. You do, however, need to specify \c to, and explicitly
-start the animation (usually via the \c running property).
+or \c target; they are automatically selected for you. You do, however, need to specify \c to.
+An animation specified as a value source will be \c running by default.
 
 \qml
 Rectangle {
@@ -94,7 +93,7 @@ Rectangle {
     Rectangle {
         color: "red"
         width: 50; height: 50
-        x: NumberAnimation { to: 50; running: true }
+        x: NumberAnimation { to: 50; }
     }
 }
 \endqml
@@ -135,7 +134,7 @@ For example, a transition could describe how an item moves from its initial posi
 transitions: [
     Transition {
         NumberAnimation {
-            matchProperties: "x,y"
+            properties: "x,y"
             easing: "easeOutBounce"
             duration: 200
         }
@@ -143,13 +142,38 @@ transitions: [
 ]
 \endcode
 
-As you can see from the above example, transitions make use of the same basic animation classes introduced
-above. However, you generally use a different set of properties when working with transitions. In the example,
-no \c target or \c property has been specified. Instead, we have specified \c matchProperties,
-which (along with \c matchTargets) acts as a selector to determine which property changes to animate;
-in this case, we will animate any x,y properties that have changed on any objects.
+As can be seen, transitions make use of the same basic animation classes introduced above.
+In the above example we have specified that we want to animate the \c x and \c y properties, but have not
+specified the objects to animate or the \c to values. By default these values are supplied by the framework --
+the animation will animate any \c targets whose \c x and \c y have changed, and the \c to values will be those
+defined in the end state. You can always supply explicit values to override these implicit values when needed.
 
-QML transitions also have selectors to determine which state changes a transition should apply to:
+\code
+Transition {
+    from: "*"
+    to: "MyState"
+    reversible: true
+    SequentialAnimation {
+        NumberAnimation {
+            duration: 1000
+            easing: "easeOutBounce"
+            // animate myItem's x and y if they have changed in the state
+            target: myItem
+            properties: "x,y"
+        }
+        NumberAnimation {
+            duration: 1000
+            // animate myItem2's y to 200, regardless of what happens in the state
+            target: myItem2
+            property: "y"
+            to: 200
+        }
+    }
+}
+\endcode
+
+QML transitions have selectors to determine which state changes a transition should apply to.
+The following transition will only be triggered when we enter into the \c "details" state.
 
 \code
 Transition {
@@ -175,50 +199,24 @@ Transition {
             NumberAnimation {
                 duration: 1000
                 easing: "easeOutBounce"
-                matchTargets: box1
-                matchProperties: "x,y"
+                targets: box1
+                properties: "x,y"
             }
             NumberAnimation {
                 duration: 1000
-                matchTargets: box2
-                matchProperties: "x,y"
+                targets: box2
+                properties: "x,y"
             }
         }
     }
 }
 \endcode
 
-To insert an explicit animation into your transition, you can use \c target and \c property as normal.
-
-\code
-Transition {
-    from: "*"
-    to: "MyState"
-    reversible: true
-    SequentialAnimation {
-        NumberAnimation {
-            duration: 1000
-            easing: "easeOutBounce"
-            // animate myItem's x and y if they have changed in the state
-            matchTargets: myItem
-            matchProperties: "x,y"
-        }
-        NumberAnimation {
-            duration: 1000
-            // animate myItem2's y to 200, regardless of what happens in the state
-            target: myItem2
-            property: "y"
-            to: 200
-        }
-    }
-}
-\endcode
-
 \section1 Property Behaviors
 
 A \l{Behavior}{property behavior} specifies a default animation to run whenever the property's value changes, regardless
-of what caused the change. Unlike Transition, \l Behavior doesn't provide a way to indicate that a Behavior
-should only apply under certain circumstances.
+of what caused the change. The \c enabled property can be used to force a \l Behavior
+to only apply under certain circumstances.
 
 In the following snippet, we specify that we want the x position of redRect to be animated
 whenever it changes. The animation will last 300 milliseconds and use an InOutQuad easing curve.
diff --git a/doc/src/declarative/basictypes.qdoc b/doc/src/declarative/basictypes.qdoc
index de5a959..16e0c2e 100644
--- a/doc/src/declarative/basictypes.qdoc
+++ b/doc/src/declarative/basictypes.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -65,6 +65,8 @@
   \qml
   Item { width: 100; height: 200 }
   \endqml
+
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -80,6 +82,7 @@
   Item { focus: true; clip: false }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -99,6 +102,7 @@
   {http://en.wikipedia.org/wiki/IEEE_754} {IEEE floating point}
   format.
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -114,6 +118,7 @@
   Text { text: "Hello world!" }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -136,6 +141,7 @@
   \raw HTML
   \endraw
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -162,6 +168,7 @@
   Rectangle { color: "#800000FF" }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -177,6 +184,7 @@
   Widget { pos: "0,20" }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -192,6 +200,7 @@
   Widget { size: "150x50" }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -207,6 +216,7 @@
   Widget { geometry: "50,50,100x100" }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -222,6 +232,7 @@
   DatePicker { minDate: "2000-01-01"; maxDate: "2020-12-31" }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -237,6 +248,7 @@
   TimePicker { time: "14:22:15" }
   \endqml
 
+  \sa {QML Basic Types}
  */
 
 /*!
@@ -261,6 +273,7 @@
   Text { font.family: "Helvetica"; font.pointSize: 13; font.bold: true }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -286,6 +299,7 @@
   Text { text: MyItem.someaction.text }
   \endqml
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -313,6 +327,7 @@
   \c Child1, \c Child2 and \c Child3 will all be added to the children list
   in the order in which they appear.
 
+  \sa {QML Basic Types}
 */
 
 /*!
@@ -338,4 +353,6 @@
   \qml
   Rotation { angle: 60; axis.x: 0; axis.y: 1; axis.z: 0 }
   \endqml
+
+  \sa {QML Basic Types}
 */
diff --git a/doc/src/declarative/declarativeui.qdoc b/doc/src/declarative/declarativeui.qdoc
index 8228c11..2bfc3d5 100644
--- a/doc/src/declarative/declarativeui.qdoc
+++ b/doc/src/declarative/declarativeui.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/dynamicobjects.qdoc b/doc/src/declarative/dynamicobjects.qdoc
index fede2cd..7a489c0 100644
--- a/doc/src/declarative/dynamicobjects.qdoc
+++ b/doc/src/declarative/dynamicobjects.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,28 +21,27 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
 
 /*!
 \page qmldynamicobjects.html
-\title Dynamic Object Creation
+\title Dynamic Object Management
 
 QML has some support for dynamically loading and managing QML objects from
 within Javascript blocks. It is preferable to use the existing QML elements for
diff --git a/doc/src/declarative/elements.qdoc b/doc/src/declarative/elements.qdoc
index cfbabf2..e8fb1e7 100644
--- a/doc/src/declarative/elements.qdoc
+++ b/doc/src/declarative/elements.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -143,6 +143,7 @@ The following table lists the QML elements provided by the Qt Declarative module
 \o \l Repeater
 \o \l SystemPalette
 \o \l GraphicsObjectContainer
+\o \l LayoutItem
 \endlist
 
 \header
diff --git a/doc/src/declarative/example-slideswitch.qdoc b/doc/src/declarative/example-slideswitch.qdoc
index 41a8574..79b362e 100644
--- a/doc/src/declarative/example-slideswitch.qdoc
+++ b/doc/src/declarative/example-slideswitch.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -121,7 +121,7 @@ states (\e on and \e off).
 This second function is called when the knob is released and we want to make sure that the knob does not end up between states
 (neither \e on nor \e off). If it is the case call the \c toggle() function otherwise we do nothing.
 
-For more information on scripts see \l{qmlecmascript.html}{JavaScript Blocks}.
+For more information on scripts see \l{qmljavascript.html}{JavaScript Blocks}.
 
 \section2 Transition
 \snippet examples/declarative/slideswitch/content/Switch.qml 7
diff --git a/doc/src/declarative/examples.qdoc b/doc/src/declarative/examples.qdoc
index 3288e17..7de7a19 100644
--- a/doc/src/declarative/examples.qdoc
+++ b/doc/src/declarative/examples.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/extending-examples.qdoc b/doc/src/declarative/extending-examples.qdoc
index 17bef4e..c569ee0 100644
--- a/doc/src/declarative/extending-examples.qdoc
+++ b/doc/src/declarative/extending-examples.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/extending.qdoc b/doc/src/declarative/extending.qdoc
index 3b9c7f3..e9a7803 100644
--- a/doc/src/declarative/extending.qdoc
+++ b/doc/src/declarative/extending.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/focus.qdoc b/doc/src/declarative/focus.qdoc
index 46bfc38..bfbb6af 100644
--- a/doc/src/declarative/focus.qdoc
+++ b/doc/src/declarative/focus.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -326,7 +326,7 @@ which in turn gives \e {active focus} to the \c {Text} element that
 actually performs the work of handling the \e {Return} key.
 
 All of the QML view classes, such as \l PathView and \l GridView, behave
-in a similar mannor to allow key handling in their respective delegates.
+in a similar manner to allow key handling in their respective delegates.
 
 \section1 Focus Panels
 
diff --git a/doc/src/declarative/globalobject.qdoc b/doc/src/declarative/globalobject.qdoc
index 764552a..fb33664 100644
--- a/doc/src/declarative/globalobject.qdoc
+++ b/doc/src/declarative/globalobject.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -71,7 +71,7 @@ when the property has one of the following types:
 \o Vector3D
 \endlist
 
-There are also string based constructors for these types, see \l{basicqmltypes.html}{Qml Types}.
+There are also string based constructors for these types, see \l{qmlbasictypes.html}{Qml Types}.
 
 \section3 Qt.rgba(qreal red, qreal green, qreal blue, qreal alpha)
 This function returns a Color with the specified \c red, \c green, \c blue and \c alpha components. All components should be in the range 0-1 inclusive.
diff --git a/doc/src/declarative/integrating.qdoc b/doc/src/declarative/integrating.qdoc
index d93a6ff..b3d6306 100644
--- a/doc/src/declarative/integrating.qdoc
+++ b/doc/src/declarative/integrating.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -68,10 +68,12 @@ elements, and QML is a better choice if your UI is comprised of a large number
 of simple and dynamic elements.
 
 \section1 Adding QML to a QGraphicsView based UI
-If you have an existing Graphics View based UI you can create new items in QML,
-and use \l{QmlComponent} to create \l{QGraphicsObject}s from the QML files. These
-\l{QGraphicsObject}s can then be placed into your \l{QGraphicsScene} using \l{QGraphicsScene::addItem}
-or by reparenting them to an item already in the \l{QGraphicsScene}.
+
+If you have an existing Graphics View based UI you can create new
+items in QML, and use \l{QmlComponent} to create \l{QGraphicsObject}s
+from the QML files. These \l{QGraphicsObject}s can then be placed into
+your \l{QGraphicsScene} using \l{QGraphicsScene::addItem()} or by
+reparenting them to an item already in the \l{QGraphicsScene}.
 
 Example, for local QML files:
 
@@ -84,6 +86,15 @@ QGraphicsObject *object =
 scene->addItem(object);
 \endcode
 
+The following QGraphicsView options are recommended for optimal performance
+of QML UIs:
+
+\list
+\o QGraphicsView::setOptimizationFlags(QGraphicsView::DontSavePainterState);
+\o QGraphicsView::setViewportUpdateMode(QGraphicsView::BoundingRectViewportUpdate);
+\o QGraphicsScene::setItemIndexMethod(QGraphicsScene::NoIndex);
+\endlist
+
 \section1 Using existing QGraphicsWidgets in QML
 Another way of integrating with a QGraphicsView based UI is to expose your
 existing QGraphicsWidgets to QML, and constructing your scene in QML. Note that
diff --git a/doc/src/declarative/javascriptblocks.qdoc b/doc/src/declarative/javascriptblocks.qdoc
index 9c72a9c..cde8eb8 100644
--- a/doc/src/declarative/javascriptblocks.qdoc
+++ b/doc/src/declarative/javascriptblocks.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/measuring-performance.qdoc b/doc/src/declarative/measuring-performance.qdoc
index bd1b0eb..8f6fe7d 100644
--- a/doc/src/declarative/measuring-performance.qdoc
+++ b/doc/src/declarative/measuring-performance.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/modules.qdoc b/doc/src/declarative/modules.qdoc
index 368595f..b2fd149 100644
--- a/doc/src/declarative/modules.qdoc
+++ b/doc/src/declarative/modules.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/network.qdoc b/doc/src/declarative/network.qdoc
index ed20e66e..fc4761e 100644
--- a/doc/src/declarative/network.qdoc
+++ b/doc/src/declarative/network.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/propertybinding.qdoc b/doc/src/declarative/propertybinding.qdoc
index ad4f13e..5d21fd1 100644
--- a/doc/src/declarative/propertybinding.qdoc
+++ b/doc/src/declarative/propertybinding.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/qmldebugging.qdoc b/doc/src/declarative/qmldebugging.qdoc
index a6def19..c11ff1f 100644
--- a/doc/src/declarative/qmldebugging.qdoc
+++ b/doc/src/declarative/qmldebugging.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/qmldocument.qdoc b/doc/src/declarative/qmldocument.qdoc
index deb6e1c..977b4ac 100644
--- a/doc/src/declarative/qmldocument.qdoc
+++ b/doc/src/declarative/qmldocument.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/qmli18n.qdoc b/doc/src/declarative/qmli18n.qdoc
index 0c8b1d1..0803d6c 100644
--- a/doc/src/declarative/qmli18n.qdoc
+++ b/doc/src/declarative/qmli18n.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -85,8 +85,8 @@ Next we create a translation source file using lupdate:
 lupdate hello.qml -ts hello.ts
 \endcode
 
-Then we open \c hello.ts in \l {Linguist}, provide a translation
-and create the release file \c hello.qm.
+Then we open \c hello.ts in \l{Qt Linguist Manual} {Linguist}, provide
+a translation and create the release file \c hello.qm.
 
 Finally, we can test the translation in qmlviewer:
 \code
diff --git a/doc/src/declarative/qmlintro.qdoc b/doc/src/declarative/qmlintro.qdoc
index 3891515..11a286f 100644
--- a/doc/src/declarative/qmlintro.qdoc
+++ b/doc/src/declarative/qmlintro.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -168,7 +168,7 @@ Properties begin with a lowercase letter (with the exception of \l{Attached Prop
 
 \section2 Property types
 
-QML supports properties of many types (see \l{Common QML Types}). The basic types include int,
+QML supports properties of many types (see \l{QML Basic Types}). The basic types include int,
 real, bool, string, color, and lists.
 
 \code
@@ -266,6 +266,7 @@ State {
 because \c changes is the default property of the \c State type.
 
 \section2 Grouped Properties
+\target dot properties
 
 In some cases properties form a logical group and use a 'dot' or grouped notation
 to show this.
diff --git a/doc/src/declarative/qmlmodels.qdoc b/doc/src/declarative/qmlmodels.qdoc
index 008ea2a..39a09bd 100644
--- a/doc/src/declarative/qmlmodels.qdoc
+++ b/doc/src/declarative/qmlmodels.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -198,6 +198,10 @@ QAbstractItemModel provides the roles set via the QAbstractItemModel::setRoleNam
 QStringList provides the contents of the list via the \e modelData role:
 
 \table
+\header
+\o 
+\o 
+\row
 \o
 \code
 // main.cpp
@@ -228,7 +232,7 @@ ListView {
 \endcode
 \endtable
 
-Note: There is no way for the view to know that the contents of a QStringList
+\note There is no way for the view to know that the contents of a QStringList
 have changed.  If the QStringList is changed, it will be necessary to reset
 the model by calling QmlContext::setContextProperty() again.
 
diff --git a/doc/src/declarative/qmlreference.qdoc b/doc/src/declarative/qmlreference.qdoc
index a413c22..7caa402 100644
--- a/doc/src/declarative/qmlreference.qdoc
+++ b/doc/src/declarative/qmlreference.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/qmlstates.qdoc b/doc/src/declarative/qmlstates.qdoc
index abf3c93..36a2479 100644
--- a/doc/src/declarative/qmlstates.qdoc
+++ b/doc/src/declarative/qmlstates.qdoc
@@ -1,3 +1,44 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
 /*!
 \page qmlstates.html
 \target qmlstates
@@ -67,7 +108,7 @@ For example, adding this code to the above \c {Item {}} element animates the tra
 \qml
     transitions: [
         Transition {
-            NumberAnimation { matchProperties: "x,y"; duration: 500 }
+            NumberAnimation { properties: "x,y"; duration: 500 }
         }
     ]
 \endqml
diff --git a/doc/src/declarative/qmlviewer.qdoc b/doc/src/declarative/qmlviewer.qdoc
index a5cb671..c2b29d3 100644
--- a/doc/src/declarative/qmlviewer.qdoc
+++ b/doc/src/declarative/qmlviewer.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/qtbinding.qdoc b/doc/src/declarative/qtbinding.qdoc
index cae0263..7857d48 100644
--- a/doc/src/declarative/qtbinding.qdoc
+++ b/doc/src/declarative/qtbinding.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -153,7 +153,7 @@ class CustomPalette : public QObject
 {
 Q_OBJECT
 Q_PROPERTY(QColor background READ background WRITE setBackground NOTIFY backgroundChanged)
-Q_PROPERTY(QColor text READ text WRITE setText NOTIFY text)
+Q_PROPERTY(QColor text READ text WRITE setText NOTIFY textChanged)
 public:
     CustomPalette() : m_background(Qt::white), m_text(Qt::black) {}
 
@@ -172,6 +172,10 @@ public:
             emit textChanged();
         }
     }
+signals:
+    void textChanged();
+    void backgroundChanged():
+
 private:
     QColor m_background;
     QColor m_text;
@@ -358,5 +362,41 @@ void MyApplication::continueLoading()
     }
 }
 \endcode
+
+\section1 Qt Resources
+
+QML content can be loaded from \l {The Qt Resource System} using the \e qrc: URL scheme.
+For example:
+
+\code
+<!DOCTYPE RCC><RCC version="1.0">
+<qresource>
+    <file>main.qml</file>
+    <file>images/background.png</file>
+</qresource>
+</RCC>
+\endcode
+\code
+// main.cpp
+MyApplication::MyApplication()
+{
+    // ...
+    component = new QmlComponent(engine, QUrl("qrc:/main.qml"));
+    if (component->isError()) {
+        qWarning() << component->errors();
+    } else {
+        QObject *myObject = component->create();
+    }
+}
+\endcode
+\code
+// main.qml
+import Qt 4.6
+
+Image {
+    source: "images/background.png"
+}
+\endcode
+
 */
 
diff --git a/doc/src/declarative/qtdeclarative.qdoc b/doc/src/declarative/qtdeclarative.qdoc
index 6a94b6e..41d6338 100644
--- a/doc/src/declarative/qtdeclarative.qdoc
+++ b/doc/src/declarative/qtdeclarative.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/qtprogrammers.qdoc b/doc/src/declarative/qtprogrammers.qdoc
index 26f73cb..343359c 100644
--- a/doc/src/declarative/qtprogrammers.qdoc
+++ b/doc/src/declarative/qtprogrammers.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
@@ -58,7 +58,7 @@ an application with a UI defined in QML also uses Qt for all the non-UI logic.
 QML provides direct access to the following concepts from Qt:
 
 \list
- \o QAction - the \l {basicqmlaction}{action} type
+ \o QAction - the \l {QML Basic Types}{action} type
  \o QObject signals and slots - available as functions to call in JavaScript
  \o QObject properties - available as variables in JavaScript
  \o QWidget - QmlView is a QML-displaying widget
diff --git a/doc/src/declarative/scope.qdoc b/doc/src/declarative/scope.qdoc
index defb217..5486afd 100644
--- a/doc/src/declarative/scope.qdoc
+++ b/doc/src/declarative/scope.qdoc
@@ -1,7 +1,8 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
-** Contact: Qt Software Information (qt-info@nokia.com)
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
 **
 ** This file is part of the documentation of the Qt Toolkit.
 **
@@ -9,8 +10,8 @@
 ** No Commercial Usage
 ** This file contains pre-release code and may not be distributed.
 ** You may use this file in accordance with the terms and conditions
-** contained in the either Technology Preview License Agreement or the
-** Beta Release License Agreement.
+** contained in the Technology Preview License Agreement accompanying
+** this package.
 **
 ** GNU Lesser General Public License Usage
 ** Alternatively, this file may be used under the terms of the GNU Lesser
@@ -20,21 +21,20 @@
 ** ensure the GNU Lesser General Public License version 2.1 requirements
 ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
 **
-** In addition, as a special exception, Nokia gives you certain
-** additional rights. These rights are described in the Nokia Qt LGPL
-** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
-** package.
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
 **
-** If you are unsure which license is appropriate for your use, please
-** contact the sales department at qt-sales@nokia.com.
 ** $QT_END_LICENSE$
 **
 ****************************************************************************/
diff --git a/doc/src/declarative/tutorial.qdoc b/doc/src/declarative/tutorial.qdoc
index 19921c0..825590c 100644
--- a/doc/src/declarative/tutorial.qdoc
+++ b/doc/src/declarative/tutorial.qdoc
@@ -1,3 +1,44 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
 /*!
 \page tutorial.html
 \title Tutorial
diff --git a/doc/src/declarative/tutorial1.qdoc b/doc/src/declarative/tutorial1.qdoc
index f7e44b0..3a79a15 100644
--- a/doc/src/declarative/tutorial1.qdoc
+++ b/doc/src/declarative/tutorial1.qdoc
@@ -1,3 +1,44 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
 /*!
 \page tutorial1.html
 \title Tutorial 1 - Basic Types
@@ -37,7 +78,7 @@ We add a \l Text element as a child of our root element that will display the te
 
 The \c y property is used to position the text vertically at 30 pixels from the top of its parent.
 
-The \c font.pointSize and \c font.bold properties are related to fonts and use the \l{Dot Properties}{dot notation}.
+The \c font.pointSize and \c font.bold properties are related to fonts and use the \l{dot properties}{dot notation}.
 
 The \c anchors.horizontalCenter property refers to the horizontal center of an element.
 In this case, we specify that our text element should be horizontally centered in the \e page element (see \l{anchor-layout}{Anchor-based Layout}).
diff --git a/doc/src/declarative/tutorial2.qdoc b/doc/src/declarative/tutorial2.qdoc
index dd0d428..4e11f7c 100644
--- a/doc/src/declarative/tutorial2.qdoc
+++ b/doc/src/declarative/tutorial2.qdoc
@@ -1,3 +1,44 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
 /*!
 \page tutorial2.html
 \title Tutorial 2 - QML Component
diff --git a/doc/src/declarative/tutorial3.qdoc b/doc/src/declarative/tutorial3.qdoc
index 290b535..323395e 100644
--- a/doc/src/declarative/tutorial3.qdoc
+++ b/doc/src/declarative/tutorial3.qdoc
@@ -1,3 +1,44 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
 /*!
 \page tutorial3.html
 \title Tutorial 3 - States and Transitions
diff --git a/doc/src/development/qtestlib.qdoc b/doc/src/development/qtestlib.qdoc
index 4b9c657..2b38b2c 100644
--- a/doc/src/development/qtestlib.qdoc
+++ b/doc/src/development/qtestlib.qdoc
@@ -582,7 +582,7 @@
 /*!
     \example qtestlib/tutorial3
 
-    \previouspage {Chapter 2 Data Driven Testing}{Chapter 2}
+    \previouspage {Chapter 2: Data Driven Testing}{Chapter 2}
     \contentspage {QTestLib Tutorial}{Contents}
     \nextpage {Chapter 4: Replaying GUI Events}{Chapter 4}
 
diff --git a/doc/src/diagrams/contentspropagation/customwidget.py b/doc/src/diagrams/contentspropagation/customwidget.py
index 44c7a6e..52a484f 100755
--- a/doc/src/diagrams/contentspropagation/customwidget.py
+++ b/doc/src/diagrams/contentspropagation/customwidget.py
@@ -5,7 +5,7 @@
 ## All rights reserved.
 ## Contact: Nokia Corporation (qt-info@nokia.com)
 ##
-## This file is part of the test suite of the Qt Toolkit.
+## This file is part of the documentation of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL$
 ## No Commercial Usage
diff --git a/doc/src/diagrams/contentspropagation/standardwidgets.py b/doc/src/diagrams/contentspropagation/standardwidgets.py
index 6c31b71..3ceabf5 100755
--- a/doc/src/diagrams/contentspropagation/standardwidgets.py
+++ b/doc/src/diagrams/contentspropagation/standardwidgets.py
@@ -5,7 +5,7 @@
 ## All rights reserved.
 ## Contact: Nokia Corporation (qt-info@nokia.com)
 ##
-## This file is part of the test suite of the Qt Toolkit.
+## This file is part of the documentation of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL$
 ## No Commercial Usage
diff --git a/doc/src/diagrams/programs/mdiarea.py b/doc/src/diagrams/programs/mdiarea.py
index d9ed472..bc8864e 100644
--- a/doc/src/diagrams/programs/mdiarea.py
+++ b/doc/src/diagrams/programs/mdiarea.py
@@ -5,7 +5,7 @@
 ## All rights reserved.
 ## Contact: Nokia Corporation (qt-info@nokia.com)
 ##
-## This file is part of the test suite of the Qt Toolkit.
+## This file is part of the documentation of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL$
 ## No Commercial Usage
diff --git a/doc/src/diagrams/programs/qpen-dashpattern.py b/doc/src/diagrams/programs/qpen-dashpattern.py
index bc8ab05..1b38d23 100644
--- a/doc/src/diagrams/programs/qpen-dashpattern.py
+++ b/doc/src/diagrams/programs/qpen-dashpattern.py
@@ -5,7 +5,7 @@
 ## All rights reserved.
 ## Contact: Nokia Corporation (qt-info@nokia.com)
 ##
-## This file is part of the test suite of the Qt Toolkit.
+## This file is part of the documentation of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL$
 ## No Commercial Usage
diff --git a/doc/src/diagrams/programs/standard_views.py b/doc/src/diagrams/programs/standard_views.py
index dbb310d..6236a3f 100644
--- a/doc/src/diagrams/programs/standard_views.py
+++ b/doc/src/diagrams/programs/standard_views.py
@@ -5,7 +5,7 @@
 ## All rights reserved.
 ## Contact: Nokia Corporation (qt-info@nokia.com)
 ##
-## This file is part of the test suite of the Qt Toolkit.
+## This file is part of the documentation of the Qt Toolkit.
 ##
 ## $QT_BEGIN_LICENSE:LGPL$
 ## No Commercial Usage
diff --git a/doc/src/examples/contextsensitivehelp.qdoc b/doc/src/examples/contextsensitivehelp.qdoc
index 668fa36..92ace2d 100644
--- a/doc/src/examples/contextsensitivehelp.qdoc
+++ b/doc/src/examples/contextsensitivehelp.qdoc
@@ -1,6 +1,6 @@
 /****************************************************************************
 **
-** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
 ** All rights reserved.
 ** Contact: Nokia Corporation (qt-info@nokia.com)
 **
diff --git a/doc/src/examples/editabletreemodel.qdoc b/doc/src/examples/editabletreemodel.qdoc
index d925c43..38754b6 100644
--- a/doc/src/examples/editabletreemodel.qdoc
+++ b/doc/src/examples/editabletreemodel.qdoc
@@ -223,7 +223,7 @@
     corresponding \c TreeItem, and return model indexes that correspond to
     its parents and children. 
 
-    In the diagram, we show how the model's \l{TreeModel::parent()}{parent()}
+    In the diagram, we show how the model's \l{TreeModel::parent}{parent()}
     implementation obtains the model index corresponding to the parent of
     an item supplied by the caller, using the items shown in a
     \l{Relations-between-internal-items}{previous diagram}.
diff --git a/doc/src/files-and-resources/resources.qdoc b/doc/src/files-and-resources/resources.qdoc
index 639aaf4..00646ac 100644
--- a/doc/src/files-and-resources/resources.qdoc
+++ b/doc/src/files-and-resources/resources.qdoc
@@ -92,8 +92,11 @@
     system.
 
     By default, resources are accessible in the application under the
-    same name as they have in the source tree, with a \c :/ prefix.
-    For example, the path \c :/images/cut.png would give access to the
+    same file name as they have in the source tree, with a \c :/ prefix,
+    or by a \link QUrl URL\endlink with a \c qrc scheme.
+
+    For example, the file path \c :/images/cut.png or the URL
+    \c qrc:///images/cut.png would give access to the
     \c cut.png file, whose location in the application's source tree
     is \c images/cut.png. This can be changed using the \c file tag's
     \c alias attribute:
diff --git a/doc/src/images/declarative-rotation.png b/doc/src/images/declarative-rotation.png
index 994011b..b4031f5 100644
--- a/doc/src/images/declarative-rotation.png
+++ b/doc/src/images/declarative-rotation.png
diff --git a/doc/src/internationalization/i18n.qdoc b/doc/src/internationalization/i18n.qdoc
index 1ca6ab3..d5f32e3 100644
--- a/doc/src/internationalization/i18n.qdoc
+++ b/doc/src/internationalization/i18n.qdoc
@@ -729,7 +729,7 @@
 
     \section1 Further Reading
 
-    \l{Qt Linguist Manual}, \l{Hello tr Example}, \l{Translation Rules for Plurals}
+    \l{Qt Linguist Manual}, \l{Hello tr() Example}, \l{Translation Rules for Plurals}
 */
 
 /*!
diff --git a/doc/src/legal/3rdparty.qdoc b/doc/src/legal/3rdparty.qdoc
index b710449..af3fc93 100644
--- a/doc/src/legal/3rdparty.qdoc
+++ b/doc/src/legal/3rdparty.qdoc
@@ -116,9 +116,9 @@
 
     \hr
 
-    Copyright (C) 2004,2007 �Red Hat, Inc.\br
-    Copyright (C) 1998-2004 �David Turner and Werner Lemberg\br
-    Copyright (C) 2006 �Behdad Esfahbod\br
+    Copyright (C) 2004,2007 Red Hat, Inc.\br
+    Copyright (C) 1998-2004 David Turner and Werner Lemberg\br
+    Copyright (C) 2006 Behdad Esfahbod\br
     Copyright (C) 2008 Nokia Corporation and/or its subsidiary(-ies)
 
     This is part of HarfBuzz, an OpenType Layout engine library.
@@ -137,7 +137,7 @@
 
     THE COPYRIGHT HOLDER SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING,
     BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
-    FITNESS FOR A PARTICULAR PURPOSE. �THE SOFTWARE PROVIDED HEREUNDER IS
+    FITNESS FOR A PARTICULAR PURPOSE. THE SOFTWARE PROVIDED HEREUNDER IS
     ON AN "AS IS" BASIS, AND THE COPYRIGHT HOLDER HAS NO OBLIGATION TO
     PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
 
@@ -146,7 +146,7 @@
     See \c src/3rdparty/harfbuzz/COPYING.FTL and src/3rdparty/harfbuzz/COPYING.GPL
     for license details.
 
-    \section1 The Independent JPEG Group's JPEG Software (\c libjpeg) version 6b
+    \section1 The Independent JPEG Group's JPEG Software (\c libjpeg) version 8
 
     \e{This package contains C software to implement JPEG image compression and
     decompression.  JPEG (pronounced "jay-peg") is a standardized compression
@@ -156,6 +156,12 @@
     exactly identical to the input image.} -- quoted from \c
     src/3rdparty/libjpeg/README.
 
+    \hr
+
+    This software is based in part on the work of the Independent JPEG Group.
+
+    \hr
+
     See \c src/3rdparty/libjpeg/README for license details.
 
     \section1 MD4 (\c md4.cpp and \c md4.h)
@@ -192,13 +198,53 @@
 
     See \c src/3rdparty/libmng/LICENSE for license details.
 
-    \section1 PNG Reference Library (\c libpng) version 1.2.29
+    \section1 PNG Reference Library (\c libpng) version 1.4.0
 
     \e{Libpng was written as a companion to the PNG specification, as a way
     of reducing the amount of time and effort it takes to support the PNG
     file format in application programs.} -- quoted from \c
     src/3rdparty/libpng/libpng.txt.
 
+    \hr
+
+    copyright (C) 1999 by Willem van Schaik <willem@schaik.com>
+    
+    version 1.0 - 1999.10.15 - First version.
+    
+    Permission to use, copy, modify, and distribute this software and
+    its documentation for any purpose and without fee is hereby granted,
+    provided that the above copyright notice appear in all copies and
+    that both that copyright notice and this permission notice appear in
+    supporting documentation. This software is provided "as is" without
+    express or implied warranty.
+    
+    \hr
+
+    Copyright (c) 1998-2001 Greg Roelofs.  All rights reserved.
+
+    This software is provided "as is," without warranty of any kind,
+    express or implied.  In no event shall the author or contributors
+    be held liable for any damages arising in any way from the use of
+    this software.
+
+    Permission is granted to anyone to use this software for any purpose,
+    including commercial applications, and to alter it and redistribute
+    it freely, subject to the following restrictions:
+
+    1. Redistributions of source code must retain the above copyright
+       notice, disclaimer, and this list of conditions.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, disclaimer, and this list of conditions in the documenta-
+       tion and/or other materials provided with the distribution.
+    3. All advertising materials mentioning features or use of this
+       software must display the following acknowledgment:
+
+          This product includes software developed by Greg Roelofs
+          and contributors for the book, "PNG: The Definitive Guide,"
+          published by O'Reilly and Associates.
+
+    \hr
+
     See \c src/3rdparty/libpng/LICENSE for license details.
 
     \section1 The ptmalloc memory allocator (\c ptmalloc3) version 1.8
@@ -259,11 +305,52 @@
 
     \hr
 
-    Copyright (c) 1988-1997 Sam Leffler\br
-    Copyright (c) 1991-1997 Silicon Graphics, Inc.\br
-    Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu>\br
-    Copyright (c) 1997 Greg Ward Larson
+    Copyright (c) 1987, 1993, 1994
+    The Regents of the University of California.  All rights reserved.
+    
+    Redistribution and use in source and binary forms, with or without
+    modification, are permitted provided that the following conditions
+    are met:
+    1. Redistributions of source code must retain the above copyright
+       notice, this list of conditions and the following disclaimer.
+    2. Redistributions in binary form must reproduce the above copyright
+       notice, this list of conditions and the following disclaimer in the
+       documentation and/or other materials provided with the distribution.
+    3. Neither the name of the University nor the names of its contributors
+       may be used to endorse or promote products derived from this software
+       without specific prior written permission.
+    
+    THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+    ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+    IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+    ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+    FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+    DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+    OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+    HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+    LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+    OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+    SUCH DAMAGE.
+
+    \hr
 
+    Copyright (C) 1988-1997 Sam Leffler
+    Copyright (C) 1991-1997 Silicon Graphics, Inc.
+    Copyright (c) Joris Van Damme <info@awaresystems.be>
+    Copyright (c) AWare Systems <http://www.awaresystems.be/>
+    Portions Copyright (C) 1985-1987, 1990 Regents of the University of California
+    Portions Copyright (C) 1990, 1991 Digital Equipment Corporation
+    Portions Copyright (C) 1990 Sun Microsystems, Inc.
+    Portions Copyright (C) 1990, 1995 Frank D. Cringle
+    Portions Copyright (C) 1996 BancTec AB
+    Portions Copyright (C) 1996 Mike Johnson
+    Portions Copyright (C) 1996 Pixar
+    Portions Copyright (C) 1997 Greg Ward Larson
+    Portions Copyright (C) 2000 Frank Warmerdam
+    Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu>
+    Copyright (c( 1996 USAF Phillips Laboratory
+    Additions (c) Richard Nolde 2006-2009 
+    
     Permission to use, copy, modify, distribute, and sell this software and 
     its documentation for any purpose is hereby granted without fee, provided
     that (i) the above copyright notices and this permission notice appear in
@@ -271,11 +358,11 @@
     Sam Leffler and Silicon Graphics may not be used in any advertising or
     publicity relating to the software without the specific, prior written
     permission of Sam Leffler and Silicon Graphics.
-
+    
     THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
     EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
     WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
-
+    
     IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
     ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
     OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
@@ -285,11 +372,30 @@
 
     \hr
 
-    Copyright (c) 1996-1997 Sam Leffler\br
-    Copyright (c) 1996 Pixar\br
-    Copyright (c) 1991-1997 Silicon Graphics, Inc.\br
-    Copyright (C) 2004, Andrey Kiselev <dron@ak4719.spb.edu>
+    Copyright (c) 1985, 1986 The Regents of the University of California.
+    All rights reserved.
+    
+    This code is derived from software contributed to Berkeley by
+    James A. Woods, derived from original work by Spencer Thomas
+    and Joseph Orost.
+    
+    Redistribution and use in source and binary forms are permitted
+    provided that the above copyright notice and this paragraph are
+    duplicated in all such forms and that any documentation,
+    advertising materials, and other materials related to such
+    distribution and use acknowledge that the software was developed
+    by the University of California, Berkeley.  The name of the
+    University may not be used to endorse or promote products derived
+    from this software without specific prior written permission.
+    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
+    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
+    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
+
+    \hr
 
+    Copyright (c) 1996-1997 Sam Leffler
+    Copyright (c) 1996 Pixar
+    
     Permission to use, copy, modify, distribute, and sell this software and 
     its documentation for any purpose is hereby granted without fee, provided
     that (i) the above copyright notices and this permission notice appear in
@@ -297,11 +403,11 @@
     Pixar, Sam Leffler and Silicon Graphics may not be used in any advertising or
     publicity relating to the software without the specific, prior written
     permission of Pixar, Sam Leffler and Silicon Graphics.
-
+    
     THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, 
     EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY 
     WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.  
-
+    
     IN NO EVENT SHALL PIXAR, SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR
     ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND,
     OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
@@ -311,28 +417,7 @@
 
     \hr
 
-    Copyright (c) 1985, 1986 The Regents of the University of California.\br
-    All rights reserved.
-
-    This code is derived from software contributed to Berkeley by
-    James A. Woods, derived from original work by Spencer Thomas
-    and Joseph Orost.
-
-    Redistribution and use in source and binary forms are permitted
-    provided that the above copyright notice and this paragraph are
-    duplicated in all such forms and that any documentation,
-    advertising materials, and other materials related to such
-    distribution and use acknowledge that the software was developed
-    by the University of California, Berkeley. �The name of the
-    University may not be used to endorse or promote products derived
-    from this software without specific prior written permission.
-    THIS SOFTWARE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
-    IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
-    WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
-
-    \hr
-
-    See \c src/3rdparty/libtiff/COPYRIGHT for license details.
+    See \c src/3rdparty/libtiff/README for license details.
 
     \section1 Wintab API (\c wintab)
 
@@ -364,7 +449,7 @@
     documentation for such software.
 
     THIS SOFTWARE IS BEING PROVIDED "AS IS", WITHOUT ANY EXPRESS OR IMPLIED
-    WARRANTY. �IN PARTICULAR, NEITHER THE AUTHOR NOR LUCENT MAKES ANY
+    WARRANTY. IN PARTICULAR, NEITHER THE AUTHOR NOR LUCENT MAKES ANY
     REPRESENTATION OR WARRANTY OF ANY KIND CONCERNING THE MERCHANTABILITY
     OF THIS SOFTWARE OR ITS FITNESS FOR ANY PARTICULAR PURPOSE.
 
diff --git a/doc/src/legal/licenses.qdoc b/doc/src/legal/licenses.qdoc
index 9e680a6..344ebd4 100644
--- a/doc/src/legal/licenses.qdoc
+++ b/doc/src/legal/licenses.qdoc
@@ -276,14 +276,14 @@
 
     Redistribution and use in source and binary forms, with or without
     modification, are permitted provided that the following conditions are met:\br
-    � � * Redistributions of source code must retain the above copyright
-    � � � notice, this list of conditions and the following disclaimer.\br
-    � � * Redistributions in binary form must reproduce the above copyright
-    � � � notice, this list of conditions and the following disclaimer in the
-    � � � documentation and/or other materials provided with the distribution.\br
-    � � * Neither the name of Research In Motion Limited nor the
-    � � � names of its contributors may be used to endorse or promote products
-    � � � derived from this software without specific prior written permission.
+        * Redistributions of source code must retain the above copyright
+          notice, this list of conditions and the following disclaimer.\br
+        * Redistributions in binary form must reproduce the above copyright
+          notice, this list of conditions and the following disclaimer in the
+          documentation and/or other materials provided with the distribution.\br
+        * Neither the name of Research In Motion Limited nor the
+          names of its contributors may be used to endorse or promote products
+          derived from this software without specific prior written permission.
 
     THIS SOFTWARE IS PROVIDED BY Research In Motion Limited ''AS IS'' AND ANY
     EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
diff --git a/doc/src/legal/trademarks.qdoc b/doc/src/legal/trademarks.qdoc
index a7b5764..23d0cf6 100644
--- a/doc/src/legal/trademarks.qdoc
+++ b/doc/src/legal/trademarks.qdoc
@@ -47,7 +47,7 @@
     \brief Information about trademarks owned by Nokia and other organisations.
 
     Nokia, the Nokia logo, Qt, and the Qt logo are trademarks of Nokia
-   �Corporation and/or its subsidiaries in Finland and other countries.
+    Corporation and/or its subsidiaries in Finland and other countries.
 
     \list
     \o Intel, Intel Inside (logos), MMX and Pentium are \reg trademarks of
diff --git a/doc/src/objectmodel/signalsandslots.qdoc b/doc/src/objectmodel/signalsandslots.qdoc
index 951a396..0f3f618 100644
--- a/doc/src/objectmodel/signalsandslots.qdoc
+++ b/doc/src/objectmodel/signalsandslots.qdoc
@@ -379,7 +379,7 @@
     \section1 Signals And Slots With Default Arguments
 
     The signatures of signals and slots may contain arguments, and the
-    arguments can have defualt values. Consider QObject::destroyed():
+    arguments can have default values. Consider QObject::destroyed():
 
     \code
     void destroyed(QObject* = 0); 
diff --git a/doc/src/qt4-intro.qdoc b/doc/src/qt4-intro.qdoc
index 5344bcc..91593d3 100644
--- a/doc/src/qt4-intro.qdoc
+++ b/doc/src/qt4-intro.qdoc
@@ -225,9 +225,9 @@
     \row    \o \l{Qt3Support}   \o Qt 3 support classes
     \row    \o \l{QAxContainer} \o ActiveQt client extension
     \row    \o \l{QAxServer}    \o ActiveQt server extension
-    \row    \o \l{QtAssistant}  \o Classes for launching Qt Assistant
+    \row    \o \l{QtHelp}  	\o Classes for integrating online documentation
     \row    \o \l{QtDesigner}   \o Classes for extending and embedding Qt Designer
-    \row    \o \l{QtUiTools}       \o Classes for dynamic GUI generation
+    \row    \o \l{QtUiTools}    \o Classes for dynamic GUI generation
     \row    \o \l{QtTest}       \o Tool classes for unit testing
     \endtable
 
diff --git a/doc/src/snippets/audio/main.cpp b/doc/src/snippets/audio/main.cpp
index 019f208..e21bf75 100644
--- a/doc/src/snippets/audio/main.cpp
+++ b/doc/src/snippets/audio/main.cpp
@@ -4,7 +4,7 @@
 ** All rights reserved.
 ** Contact: Nokia Corporation (qt-info@nokia.com)
 **
-** This file is part of the test suite of the Qt Toolkit.
+** This file is part of the documentation of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:LGPL$
 ** No Commercial Usage
diff --git a/doc/src/snippets/code/src_corelib_statemachine_qstatemachine.cpp b/doc/src/snippets/code/src_corelib_statemachine_qstatemachine.cpp
index a18971d..1b1abea 100644
--- a/doc/src/snippets/code/src_corelib_statemachine_qstatemachine.cpp
+++ b/doc/src/snippets/code/src_corelib_statemachine_qstatemachine.cpp
@@ -4,7 +4,7 @@
 ** All rights reserved.
 ** Contact: Nokia Corporation (qt-info@nokia.com)
 **
-** This file is part of the test suite of the Qt Toolkit.
+** This file is part of the documentation of the Qt Toolkit.
 **
 ** $QT_BEGIN_LICENSE:LGPL$
 ** No Commercial Usage
diff --git a/doc/src/tutorials/addressbook-fr.qdoc b/doc/src/tutorials/addressbook-fr.qdoc
index d3bd1ca..98c44a3 100644
--- a/doc/src/tutorials/addressbook-fr.qdoc
+++ b/doc/src/tutorials/addressbook-fr.qdoc
@@ -47,47 +47,47 @@
     \nextpage {tutorials/addressbook-fr/part1}{Chapitre 1}
 
     \title Tutoriel "Carnet d'adresses"
-    \brief Une introduction � la programation d'interface graphique montrant comment construire une application simple avec Qt.
+    \brief Une introduction à la programation d'interface graphique montrant comment construire une application simple avec Qt.
 
-    Ce tutoriel est une introduction � la programmation de GUI (interface utilisateur)
-    � l'aide des outils fournis par la plateforme multiplate-forme Qt.
+    Ce tutoriel est une introduction à la programmation de GUI (interface utilisateur)
+    à l'aide des outils fournis par la plateforme multiplate-forme Qt.
 
     \image addressbook-tutorial-screenshot.png
 
-    Ce tutoriel va nous amener � d�couvrir quelques technologies fondamentales fournies 
+    Ce tutoriel va nous amener à découvrir quelques technologies fondamentales fournies 
     par Qt, tel que:
 
     \list
-    \o Les Widgets et leur mise en page � l'aide des layouts
+    \o Les Widgets et leur mise en page à l'aide des layouts
     \o Les signaux et slots
-    \o Les structures de donn�es de collections
-    \o Les entr�es/sorties
+    \o Les structures de données de collections
+    \o Les entrées/sorties
     \endlist
 
     Si c'est votre premier contact avec Qt, lisez \l{How to Learn Qt}{Comment apprendre Qt}
-    si ce n'est d�j� fait.
+    si ce n'est déjà fait.
 
-    Le code source du tutoriel est distribu� avec Qt dans le dossier \c examples/tutorials/addressbook
+    Le code source du tutoriel est distribué avec Qt dans le dossier \c examples/tutorials/addressbook
 
     Les chapitres du tutoriel:
 
     \list 1
     \o \l{tutorials/addressbook-fr/part1}{Conception de l'interface utilisateur}
     \o \l{tutorials/addressbook-fr/part2}{Ajouter des adresses}
-    \o \l{tutorials/addressbook-fr/part3}{Navigation entre les �l�ments}
-    \o \l{tutorials/addressbook-fr/part4}{�diter et supprimer des adresses}
+    \o \l{tutorials/addressbook-fr/part3}{Navigation entre les éléments}
+    \o \l{tutorials/addressbook-fr/part4}{éditer et supprimer des adresses}
     \o \l{tutorials/addressbook-fr/part5}{Ajout d'une fonction de recherche}
     \o \l{tutorials/addressbook-fr/part6}{Sauvegarde et chargement}
-    \o \l{tutorials/addressbook-fr/part7}{Fonctionnalit�s avanc�es}
+    \o \l{tutorials/addressbook-fr/part7}{Fonctionnalités avancées}
     \endlist
 
-    La petite application que nous d�velopperons ici ne poss�de pas tous les �l�ments
+    La petite application que nous développerons ici ne possède pas tous les éléments
     des interfaces dernier cri, elle va nous permettre d'utiliser les techniques de base
-    utilis�es dans les applications plus complexes.
+    utilisées dans les applications plus complexes.
 
-    Lorsque vous aurez termin� ce tutoriel, nous vous recommandons de poursuivre avec l'exemple
-    "\l{mainwindows/application}{Application}", qui pr�sente une interface simple utilisant
-    les menus et barres d'outils, la barre d'�tat, etc.
+    Lorsque vous aurez terminé ce tutoriel, nous vous recommandons de poursuivre avec l'exemple
+    "\l{mainwindows/application}{Application}", qui présente une interface simple utilisant
+    les menus et barres d'outils, la barre d'état, etc.
 
 */
 
@@ -98,156 +98,156 @@
     \example tutorials/addressbook-fr/part1
     \title Carnet d'adresses 1 - Conception de l'interface utilisateur
 
-    La premi�re partie de ce tutoriel traite de la conception d'une interface graphique
+    La première partie de ce tutoriel traite de la conception d'une interface graphique
     (GUI) basique, que l'on utilisera pour l'application Carnet d'adresses.
 
-    La premi�re �tape dans la cr�ation d'applications graphiques est la conception de
-    l'interface utilisateur. Dans ce chapitre, nous verrons comment cr�er les labels
-    et champs de saisie n�cessaires � l'implementation d'un carnet d'adresses de base.
-    Le r�sultat attendu est illustr� par la capture d'�cran ci-dessous.
+    La première étape dans la création d'applications graphiques est la conception de
+    l'interface utilisateur. Dans ce chapitre, nous verrons comment créer les labels
+    et champs de saisie nécessaires à l'implementation d'un carnet d'adresses de base.
+    Le résultat attendu est illustré par la capture d'écran ci-dessous.
 
     \image addressbook-tutorial-part1-screenshot.png
 
     Nous allons avoir besoin de deux objets QLabel, \c nameLabel et \c addressLabel,
     ainsi que deux champs de saisie: un objet QLineEdit, \c nameLine, et un objet
-    QTextEdit, \c addressText, afin de permettre � l'utilisateur d'entrer le nom d'un
-    contact et son adresse. Les widgets utilis�s ainsi que leur placement sont visibles ci-dessous.
+    QTextEdit, \c addressText, afin de permettre à l'utilisateur d'entrer le nom d'un
+    contact et son adresse. Les widgets utilisés ainsi que leur placement sont visibles ci-dessous.
 
     \image addressbook-tutorial-part1-labeled-screenshot.png
 
-    Trois fichiers sont n�cessaires � l'impl�mentation de ce carnet d'adresses:
+    Trois fichiers sont nécessaires à l'implémentation de ce carnet d'adresses:
 
     \list
-        \o \c{addressbook.h} - le fichier de d�finition (header) pour la classe \c AddressBook,
-        \o \c{addressbook.cpp} - le fichier source, qui comprend l'impl�mentation de la classe
+        \o \c{addressbook.h} - le fichier de définition (header) pour la classe \c AddressBook,
+        \o \c{addressbook.cpp} - le fichier source, qui comprend l'implémentation de la classe
             \c AddressBook
-        \o \c{main.cpp} - le fichier qui contient la m�thode \c main() , et
+        \o \c{main.cpp} - le fichier qui contient la méthode \c main() , et
         une instance de la classe \c AddressBook.
     \endlist
 
-    \section1 Programmation en Qt - h�ritage
+    \section1 Programmation en Qt - héritage
 
 
-    Lorsque l'on �crit des programmes avec Qt, on a g�n�ralement recours �
-    l'h�ritage depuis des objets Qt, afin d'y ajouter des fonctionnalit�s.
-    C'est l'un des concepts fondamentaux de la cr�ation de widgets personnalis�s
-    ou de collections de widgets. Utiliser l'h�ritage afin de compl�ter
-    ou modifier le comportement d'un widget pr�sente les avantages suivants:
+    Lorsque l'on écrit des programmes avec Qt, on a généralement recours à
+    l'héritage depuis des objets Qt, afin d'y ajouter des fonctionnalités.
+    C'est l'un des concepts fondamentaux de la création de widgets personnalisés
+    ou de collections de widgets. Utiliser l'héritage afin de compléter
+    ou modifier le comportement d'un widget présente les avantages suivants:
 
     \list
-    \o La possibilit� d'impl�menter des m�thodes virtuelles et des m�thodes 
-    virtuelles pures pour obtenir exactement ce que l'on souhaite, avec la possibilit�
-    d'utiliser l'impl�mentation de la classe m�re si besoin est.
+    \o La possibilité d'implémenter des méthodes virtuelles et des méthodes 
+    virtuelles pures pour obtenir exactement ce que l'on souhaite, avec la possibilité
+    d'utiliser l'implémentation de la classe mère si besoin est.
     \o Cela permet l'encapsulation partielle de l'interface utilisateur dans une classe,
-    afin que les autres parties de l'application n'aient pas � se soucier de chacun des
+    afin que les autres parties de l'application n'aient pas à se soucier de chacun des
     widgets qui forment l'interface utilisateur.
-    \o La classe fille peut �tre utilis�e pour cr�er de nombreux widgets personnalis�s
-    dans une m�me application ou biblioth�que, et le code de la classe fille peut �tre
-    r�utilis� dans d'autres projets
+    \o La classe fille peut être utilisée pour créer de nombreux widgets personnalisés
+    dans une même application ou bibliothèque, et le code de la classe fille peut être
+    réutilisé dans d'autres projets
     \endlist
 
     Comme Qt ne fournit pas de widget standard pour un carnet d'adresses, nous 
-    partirons d'une classe de widget Qt standard et y ajouterons des fonctionnalit�s.
-    La classe \c AddressBook cr�e dans ce tutoriel peut �tre r�utilis�e si on a besoin d'un
+    partirons d'une classe de widget Qt standard et y ajouterons des fonctionnalités.
+    La classe \c AddressBook crée dans ce tutoriel peut être réutilisée si on a besoin d'un
     widget carnet d'adresses basique.
 
 
     \section1 La classe AddressBook
 
     Le fichier \l{tutorials/addressbook-fr/part1/addressbook.h}{\c addressbook.h} permet de
-    d�finir la classe \c AddressBook.
+    définir la classe \c AddressBook.
 
-    On commence par d�finir \c AddressBook comme une classe fille de QWidget et d�clarer
-    un constructeur. On utilise �galement la macro Q_OBJECT pour indiquer que la classe
-    exploite les fonctionnalit�s de signaux et slots offertes par Qt ainsi que
-    l'internationalisation, bien que nous ne les utilisions pas � ce stade.
+    On commence par définir \c AddressBook comme une classe fille de QWidget et déclarer
+    un constructeur. On utilise également la macro Q_OBJECT pour indiquer que la classe
+    exploite les fonctionnalités de signaux et slots offertes par Qt ainsi que
+    l'internationalisation, bien que nous ne les utilisions pas à ce stade.
 
     \snippet tutorials/addressbook-fr/part1/addressbook.h class definition
 
-    La classe contient les d�clarations de \c nameLine et \c addressText,
-    les instances priv�es de QLineEdit et QTextEdit mentionn�es pr�c�demment.
-    Vous verrez, dans les chapitres � venir que les informations contenues
-    dans \c nameLine et \c addressText sont n�cessaires � de nombreuses m�thodes
+    La classe contient les déclarations de \c nameLine et \c addressText,
+    les instances privées de QLineEdit et QTextEdit mentionnées précédemment.
+    Vous verrez, dans les chapitres à venir que les informations contenues
+    dans \c nameLine et \c addressText sont nécessaires à de nombreuses méthodes
     du carnet d'adresses.
 
-    Il n'est pas n�cessaire de d�clarer les objets QLabel que nous allons utiliser 
-    puisque nous n'aurons pas besoin d'y faire r�f�rence apr�s leur cr�ation.
-    La fa�on dont Qt g�re la parent� des objets est trait�e dans la section suivante.
+    Il n'est pas nécessaire de déclarer les objets QLabel que nous allons utiliser 
+    puisque nous n'aurons pas besoin d'y faire référence après leur création.
+    La façon dont Qt gère la parenté des objets est traitée dans la section suivante.
 
-    La macro Q_OBJECT impl�mente des fonctionnalit�s parmi les plus avanc�es de Qt.
+    La macro Q_OBJECT implémente des fonctionnalités parmi les plus avancées de Qt.
     Pour le moment, il est bon de voir la macro Q_OBJECT comme un raccourci nous 
-    permettant d'utiliser les m�thodes \l{QObject::}{tr()} et \l{QObject::}{connect()}.
+    permettant d'utiliser les méthodes \l{QObject::}{tr()} et \l{QObject::}{connect()}.
 
-    Nous en avons maintenant termin� avec le fichier \c addressbook.h et allons
-    passer � l'impl�mentation du fichier \c addressbook.cpp.
+    Nous en avons maintenant terminé avec le fichier \c addressbook.h et allons
+    passer à l'implémentation du fichier \c addressbook.cpp.
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
-    Le constructeur de la classe \c{AddressBook} prend en param�tre un QWidget, \e parent.
-    Par convention, on passe ce param�tre au constructeur de la classe m�re.
-    Ce concept de parent�, o� un parent peut avoir un ou plusieurs enfants, est utile
-    pour regrouper les Widgets avec Qt. Par exemple, si vous d�truisez le parent,
-    tous ses enfants seront d�truits �galament.
+    Le constructeur de la classe \c{AddressBook} prend en paramètre un QWidget, \e parent.
+    Par convention, on passe ce paramètre au constructeur de la classe mère.
+    Ce concept de parenté, où un parent peut avoir un ou plusieurs enfants, est utile
+    pour regrouper les Widgets avec Qt. Par exemple, si vous détruisez le parent,
+    tous ses enfants seront détruits égalament.
 
 
     \snippet tutorials/addressbook/part1/addressbook.cpp constructor and input fields
 
-    � l'int�rieur de ce constructeur, on d�clare et instancie deux objets locaux
-    QLabel, \c nameLabel et \c addressLabel, de m�me on instancie \c nameLine et
-    \c addressText. La m�thode \l{QObject::tr()}{tr()} renvoie une version traduite
-    de la cha�ne de caract�res, si elle existe; dans le cas contraire, elle renvoie
-    la cha�ne elle m�me. On peut voir cette m�thode comme un marqueur \tt{<ins�rer
-    la traduction ici>}, permettant de rep�rer les objets QString � consid�rer
-    pour traduire une application. Vous remarquerez, dans les chapitres � venir
-    comme dans les \l{Qt Examples}{exemples Qt}, qu'elle est utilis�e chaque fois
-    que l'on utilise une cha�ne susceptible d'�tre traduite.
+    à l'intérieur de ce constructeur, on déclare et instancie deux objets locaux
+    QLabel, \c nameLabel et \c addressLabel, de même on instancie \c nameLine et
+    \c addressText. La méthode \l{QObject::tr()}{tr()} renvoie une version traduite
+    de la chaîne de caractères, si elle existe; dans le cas contraire, elle renvoie
+    la chaîne elle même. On peut voir cette méthode comme un marqueur \tt{<insérer
+    la traduction ici>}, permettant de repérer les objets QString à considérer
+    pour traduire une application. Vous remarquerez, dans les chapitres à venir
+    comme dans les \l{Qt Examples}{exemples Qt}, qu'elle est utilisée chaque fois
+    que l'on utilise une chaîne susceptible d'être traduite.
 
     Lorsque l'on programme avec Qt, il est utile de savoir comment fonctionnent les
     agencements ou layouts. Qt fournit trois classes principales de layouts pour
-    contr�ler le placement des widgets: QHBoxLayout, QVBoxLayout et QGridLayout.
+    contrôler le placement des widgets: QHBoxLayout, QVBoxLayout et QGridLayout.
 
     \image addressbook-tutorial-part1-labeled-layout.png
 
-    On utilise un QGridLayout pour positionner nos labels et champs de saisie de mani�re
-    structur�e. QGridLayout divise l'espace disponible en une grille, et place les
-    widgets dans les cellules que l'on sp�cifie par les num�ros de ligne et de colonne.
-    Le diagramme ci-dessus pr�sente les cellules et la position des widgets, et cette
-    organisation est obtenue � l'aide du code suivant:
+    On utilise un QGridLayout pour positionner nos labels et champs de saisie de manière
+    structurée. QGridLayout divise l'espace disponible en une grille, et place les
+    widgets dans les cellules que l'on spécifie par les numéros de ligne et de colonne.
+    Le diagramme ci-dessus présente les cellules et la position des widgets, et cette
+    organisation est obtenue à l'aide du code suivant:
 
     \snippet tutorials/addressbook/part1/addressbook.cpp layout
 
-    On remarque que le label \c AddressLabel est positionn� en utilisant Qt::AlignTop
-    comme argument optionnel. Ceci est destin� � assurer qu'il ne sera pas centr�
-    verticalement dans la cellule (1,0). Pour un aper�u rapide des layouts de Qt,
+    On remarque que le label \c AddressLabel est positionné en utilisant Qt::AlignTop
+    comme argument optionnel. Ceci est destiné à assurer qu'il ne sera pas centré
+    verticalement dans la cellule (1,0). Pour un aperçu rapide des layouts de Qt,
     consultez la section \l{Layout Management}.
 
-    Afin d'installer l'objet layout dans un widget, il faut appeler la m�thode
+    Afin d'installer l'objet layout dans un widget, il faut appeler la méthode
     \l{QWidget::setLayout()}{setLayout()} du widget en question:
 
     \snippet tutorials/addressbook/part1/addressbook.cpp setting the layout
 
-    Enfin, on initialise le titre du widget � "Simple Address Book"
+    Enfin, on initialise le titre du widget à "Simple Address Book"
 
-    \section1 Ex�cution de l'application
+    \section1 Exécution de l'application
 
-    Un fichier s�par�, \c main.cpp, est utilis� pour la m�thode \c main(). Dans cette
-    fonction, on cr�e une instance de QApplication, \c app. QApplication se charge de
-    des ressources communes � l'ensemble de l'application, tel que les polices de
-    caract�res et le curseur par d�faut, ainsi que de l'ex�cution de la boucle d'�v�nements.
+    Un fichier séparé, \c main.cpp, est utilisé pour la méthode \c main(). Dans cette
+    fonction, on crée une instance de QApplication, \c app. QApplication se charge de
+    des ressources communes à l'ensemble de l'application, tel que les polices de
+    caractères et le curseur par défaut, ainsi que de l'exécution de la boucle d'évènements.
     De ce fait, il y a toujours un objet QApplication dans toute application graphique en Qt.
 
     \snippet tutorials/addressbook/part1/main.cpp main function
 
     On construit un nouveau widget \c AddressBook sur la pile et on invoque
-    sa m�thode \l{QWidget::show()}{show()} pour l'afficher.
-    Cependant, le widget ne sera pas visible tant que la boucle d'�v�nements
-    n'aura pas �t� lanc�e. On d�marre la boucle d'�v�nements en appelant la
-    m�thode \l{QApplication::}{exec()} de l'application; le r�sultat renvoy�
-    par cette m�thode est lui m�me utilis� comme valeur de retour pour la m�thode
+    sa méthode \l{QWidget::show()}{show()} pour l'afficher.
+    Cependant, le widget ne sera pas visible tant que la boucle d'évènements
+    n'aura pas été lancée. On démarre la boucle d'évènements en appelant la
+    méthode \l{QApplication::}{exec()} de l'application; le résultat renvoyé
+    par cette méthode est lui même utilisé comme valeur de retour pour la méthode
     \c main().
-    On comprend maintenant pourquoi \c AddressBook a �t� cr�� sur la pile: � la fin
+    On comprend maintenant pourquoi \c AddressBook a été créé sur la pile: à la fin
     du programme, l'objet sort du scope de la fonction \c main() et tous ses widgets enfants
-    sont supprim�s, assurant ainsi qu'il n'y aura pas de fuites de m�moire.
+    sont supprimés, assurant ainsi qu'il n'y aura pas de fuites de mémoire.
 */
 
 /*!
@@ -258,53 +258,53 @@
     \example tutorials/addressbook-fr/part2
     \title Carnet d'adresses 2 - Ajouter des adresses
 
-    La prochaine �tape pour cr�er notre carnet d'adresses est d'ajouter un soup�on
-    d'interactivit�.
+    La prochaine étape pour créer notre carnet d'adresses est d'ajouter un soupçon
+    d'interactivité.
 
     \image addressbook-tutorial-part2-add-contact.png
 
     Nous allons fournir un bouton que l'utilisateur peut
-    cliquer pour ajouter un nouveau contact. Une structure de donn�es est aussi
-    n�cessaire afin de pouvoir stocker les contacts en m�moire.
+    cliquer pour ajouter un nouveau contact. Une structure de données est aussi
+    nécessaire afin de pouvoir stocker les contacts en mémoire.
 
-    \section1 D�finition de la classe AddressBook
+    \section1 Définition de la classe AddressBook
 
     Maintenant que nous avons mis en place les labels et les champs de saisie,
-    nous ajoutons les boutons pour compl�ter le processus d'ajout d'un contact.
+    nous ajoutons les boutons pour compléter le processus d'ajout d'un contact.
     Cela veut dire que notre fichier \c addressbook.h a maintenant trois
     objets QPushButton et trois slots publics correspondant.
 
     \snippet tutorials/addressbook/part2/addressbook.h slots
 
-    Un slot est une m�thode qui r�pond � un signal. Nous allons
-    voir ce concept en d�tail lorsque nous impl�menterons la classe \c{AddressBook}.
-    Pour une explication d�taill�e du concept de signal et slot, vous pouvez
-    vous r�f�rer au document \l{Signals and Slots}.
+    Un slot est une méthode qui répond à un signal. Nous allons
+    voir ce concept en détail lorsque nous implémenterons la classe \c{AddressBook}.
+    Pour une explication détaillée du concept de signal et slot, vous pouvez
+    vous référer au document \l{Signals and Slots}.
 
     Les trois objets QPushButton \c addButton, \c submitButton et \c cancelButton
-    sont maintenant inclus dans la d�claration des variables priv�es, avec
-    \c nameLine et \c addressText du chapitre pr�c�dent.
+    sont maintenant inclus dans la déclaration des variables privées, avec
+    \c nameLine et \c addressText du chapitre précédent.
 
     \snippet tutorials/addressbook/part2/addressbook.h pushbutton declaration
 
     Nous avons besoin d'un conteneur pour stocker les contacts du carnet
-    d'adresses, de fa�on � pouvoir les �num�rer et les afficher.
-    Un objet QMap, \c contacts, est utilis� pour �a, car il permet de stocker
-    des paires cl�-valeur: le nom du contact est la \e{cl�} et l'adresse du contact
+    d'adresses, de façon à pouvoir les énumérer et les afficher.
+    Un objet QMap, \c contacts, est utilisé pour ça, car il permet de stocker
+    des paires clé-valeur: le nom du contact est la \e{clé} et l'adresse du contact
     est la \e{valeur}.
 
     \snippet tutorials/addressbook/part2/addressbook.h remaining private variables
 
-    Nous d�clarons aussi deux objects QString priv�s: \c oldName et \c oldAddress.
-    Ces objets sont n�cessaires pour conserver le nom et l'adresse du dernier contact
-    affich� avant que l'utilisateur ne clique sur le bouton "Add". Gr�ce � ces variables
+    Nous déclarons aussi deux objects QString privés: \c oldName et \c oldAddress.
+    Ces objets sont nécessaires pour conserver le nom et l'adresse du dernier contact
+    affiché avant que l'utilisateur ne clique sur le bouton "Add". Grâce à ces variables
     si l'utilisateur clique sur "Cancel", il est possible de revenir
-    � l'affichage du dernier contact.
+    à l'affichage du dernier contact.
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
     Dans le constructeur de \c AddressBook, \c nameLine et
-    \c addressText sont mis en mode lecture seule, de fa�on � autoriser l'affichage
+    \c addressText sont mis en mode lecture seule, de façon à autoriser l'affichage
     mais pas la modification du contact courant.
 
     \dots
@@ -317,16 +317,16 @@
 
     \snippet tutorials/addressbook/part2/addressbook.cpp pushbutton declaration
 
-    Le bouton \c addButton est affich� en invoquant la m�thode \l{QPushButton::show()}
-    {show()}, tandis que \c submitButton et \c cancelButton sont cach�s en invoquant
-    \l{QPushButton::hide()}{hide()}. Ces deux boutons ne seront affich�s que lorsque 
-    l'utilisateur cliquera sur "Add", et ceci est g�r� par la m�thode \c addContact()
-    d�crite plus loin.
+    Le bouton \c addButton est affiché en invoquant la méthode \l{QPushButton::show()}
+    {show()}, tandis que \c submitButton et \c cancelButton sont cachés en invoquant
+    \l{QPushButton::hide()}{hide()}. Ces deux boutons ne seront affichés que lorsque 
+    l'utilisateur cliquera sur "Add", et ceci est géré par la méthode \c addContact()
+    décrite plus loin.
 
     \snippet tutorials/addressbook/part2/addressbook.cpp connecting signals and slots
 
     Nous connectons le signal \l{QPushButton::clicked()}{clicked()} de chaque bouton 
-    au slot qui g�rera l'action.
+    au slot qui gèrera l'action.
     L'image ci-dessous illustre ceci:
 
     \image addressbook-tutorial-part2-signals-and-slots.png
@@ -336,77 +336,77 @@
 
     \snippet tutorials/addressbook/part2/addressbook.cpp vertical layout
 
-    La methode \l{QBoxLayout::addStretch()}{addStretch()} est utilis�e pour
-    assurer que les boutons ne sont pas r�partis uniform�ment, mais regroup�s
-    dans la partie supperieure du widget. La figure ci-dessous montre la diff�rence
-    si \l{QBoxLayout::addStretch()}{addStretch()} est utilis� ou pas.
+    La methode \l{QBoxLayout::addStretch()}{addStretch()} est utilisée pour
+    assurer que les boutons ne sont pas répartis uniformément, mais regroupés
+    dans la partie supperieure du widget. La figure ci-dessous montre la différence
+    si \l{QBoxLayout::addStretch()}{addStretch()} est utilisé ou pas.
 
     \image addressbook-tutorial-part2-stretch-effects.png
 
-    Ensuite nous ajoutons \c buttonLayout1 � \c mainLayout, en utilisant
+    Ensuite nous ajoutons \c buttonLayout1 à \c mainLayout, en utilisant
     \l{QGridLayout::addLayout()}{addLayout()}. Ceci nous permet d'imbriquer les
     mises en page puisque \c buttonLayout1 est maintenant un enfant de \c mainLayout.
 
     \snippet tutorials/addressbook/part2/addressbook.cpp grid layout
 
-    Les coordonn�es du layout global ressemblent maintenant � �a:
+    Les coordonnées du layout global ressemblent maintenant à ça:
 
     \image addressbook-tutorial-part2-labeled-layout.png
 
-    Dans la m�thode \c addContact(), nous stockons les d�tails du dernier
-    contact affich� dans \c oldName et \c oldAddress. Ensuite, nous
-    vidons ces champs de saisie et nous d�sactivons le mode
-    lecture seule. Le focus est plac� sur \c nameLine et on affiche
+    Dans la méthode \c addContact(), nous stockons les détails du dernier
+    contact affiché dans \c oldName et \c oldAddress. Ensuite, nous
+    vidons ces champs de saisie et nous désactivons le mode
+    lecture seule. Le focus est placé sur \c nameLine et on affiche
     \c submitButton et \c cancelButton.
 
     \snippet tutorials/addressbook/part2/addressbook.cpp addContact
 
-    La m�thode \c submitContact() peut �tre divis�e en trois parties:
+    La méthode \c submitContact() peut être divisée en trois parties:
 
     \list 1
-    \o Nous extrayons les d�tails du contact depuis \c nameLine et \c addressText
+    \o Nous extrayons les détails du contact depuis \c nameLine et \c addressText
     et les stockons dans des objets QString. Nous les validons pour s'assurer
-    que l'utilisateur n'a pas cliqu� sur "Add" avec des champs de saisie
-    vides; sinon un message est affich� avec QMessageBox pour rappeller �
-    l'utilisateur que les deux champs doivent �tre compl�t�s.
+    que l'utilisateur n'a pas cliqué sur "Add" avec des champs de saisie
+    vides; sinon un message est affiché avec QMessageBox pour rappeller à
+    l'utilisateur que les deux champs doivent être complétés.
 
     \snippet tutorials/addressbook/part2/addressbook.cpp submitContact part1
 
-    \o Ensuite, nous v�rifions si le contact existe d�j�. Si aucun contacts
-    existant n'entre en conflit avec le nouveau, nous l'ajoutons �
+    \o Ensuite, nous vérifions si le contact existe déjà. Si aucun contacts
+    existant n'entre en conflit avec le nouveau, nous l'ajoutons à
     \c contacts et nous affichons un QMessageBox pour informer l'utilisateur
-    que le contact a �t� ajout�.
+    que le contact a été ajouté.
 
     \snippet tutorials/addressbook/part2/addressbook.cpp submitContact part2
 
-    Si le contact existe d�j�, nous affichons un QMessageBox pour informer
-    l'utilisateur du probl�me.
-    Notre objet \c contacts est bas� sur des paires cl�-valeur form�s par
-    le nom et l'adresse, nous voulons nous assurer que la \e cl� est unique.
+    Si le contact existe déjà, nous affichons un QMessageBox pour informer
+    l'utilisateur du problème.
+    Notre objet \c contacts est basé sur des paires clé-valeur formés par
+    le nom et l'adresse, nous voulons nous assurer que la \e clé est unique.
 
-    \o Une fois que les deux v�rifications pr�c�dentes ont �t� trait�es,
-    nous restaurons les boutons � leur �tat normal � l'aide du code
+    \o Une fois que les deux vérifications précédentes ont été traitées,
+    nous restaurons les boutons à leur état normal à l'aide du code
     suivant:
 
     \snippet tutorials/addressbook/part2/addressbook.cpp submitContact part3
 
     \endlist
 
-    La capture d'�cran ci-dessous montre l'affichage fournit par un objet
-    QMessageBox, utilis� ici pour afficher un message d'information
-    � l'utilisateur:
+    La capture d'écran ci-dessous montre l'affichage fournit par un objet
+    QMessageBox, utilisé ici pour afficher un message d'information
+    à l'utilisateur:
 
     \image addressbook-tutorial-part2-add-successful.png
 
-    La m�thode \c cancel() restaure les d�tails du dernier contact, active
+    La méthode \c cancel() restaure les détails du dernier contact, active
     \c addButton, et cache \c submitButton et \c cancelButton.
 
     \snippet tutorials/addressbook/part2/addressbook.cpp cancel
 
-    L'id�e g�n�rale pour augmenter la flexibilit� lors de l'ajout d'un 
-    contact est de donner la possiblit� de cliquer sur "Add" 
-    ou "Cancel" � n'importe quel moment.
-    L'organigramme ci-dessous reprend l'ensemble des interactions d�velop�es
+    L'idée générale pour augmenter la flexibilité lors de l'ajout d'un 
+    contact est de donner la possiblité de cliquer sur "Add" 
+    ou "Cancel" à n'importe quel moment.
+    L'organigramme ci-dessous reprend l'ensemble des interactions dévelopées
     jusqu'ici:
 
     \image addressbook-tutorial-part2-add-flowchart.png
@@ -418,118 +418,118 @@
     \contentspage {Tutoriel "Carnet d'adresses"}{Sommaire}
     \nextpage {tutorials/addressbook-fr/part4}{Chapitre 4}
     \example tutorials/addressbook-fr/part3
-    \title Carnet d'adresses 3 - Navigation entre les �l�ments
+    \title Carnet d'adresses 3 - Navigation entre les éléments
 
-    L'application "Carnet d'adresses" est maintenant � moiti� termin�e. Il
+    L'application "Carnet d'adresses" est maintenant à moitié terminée. Il
     nous faut maintenant ajouter quelques fonctions pour naviguer entre
-    les contacts. Avant de commencer, il faut se d�cider sur le type de structure de
-    donn�es le plus appropri� pour stocker les contacts.
+    les contacts. Avant de commencer, il faut se décider sur le type de structure de
+    données le plus approprié pour stocker les contacts.
 
-    Dans le chapitre 2, nous avons utilis� un QMap utilisant des paires cl�-valeur,
-    avec le nom du contact comme \e cl�, et l'adresse du contact comme \e valeur.
+    Dans le chapitre 2, nous avons utilisé un QMap utilisant des paires clé-valeur,
+    avec le nom du contact comme \e clé, et l'adresse du contact comme \e valeur.
     Cela fonctionnait bien jusqu'ici, mais pour ajouter la navigation entre les
-    entr�es, quelques am�liorations sont n�cessaires.
+    entrées, quelques améliorations sont nécessaires.
 
-    Nous am�liorerons le QMap en le faisant ressembler � une structure de donn�es
-    similaire � une liste li�e, o� tous les �l�ments sont connect�s, y compris
-    le premier et le dernier �l�ment. La figure ci-dessous illustre cette structure
-    de donn�e.
+    Nous améliorerons le QMap en le faisant ressembler à une structure de données
+    similaire à une liste liée, où tous les éléments sont connectés, y compris
+    le premier et le dernier élément. La figure ci-dessous illustre cette structure
+    de donnée.
 
     \image addressbook-tutorial-part3-linkedlist.png
 
-    \section1 D�finition de la classe AddressBook
+    \section1 Définition de la classe AddressBook
 
     Pour ajouter les fonctions de navigation au carnet d'adresses, nous avons
-    besoin de deux slots suppl�mentaires dans notre classe \c AddressBook:
-    \c next() et \c previous(). Ceux-ci sont ajout�s au fichier addressbook.h:
+    besoin de deux slots supplémentaires dans notre classe \c AddressBook:
+    \c next() et \c previous(). Ceux-ci sont ajoutés au fichier addressbook.h:
 
     \snippet tutorials/addressbook/part3/addressbook.h navigation functions
 
     Nous avons aussi besoin de deux nouveaux objets QPushButton, nous ajoutons
-    donc les variables priv�es \c nextButton et \c previousButton.
+    donc les variables privées \c nextButton et \c previousButton.
 
     \snippet tutorials/addressbook/part3/addressbook.h navigation pushbuttons
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
-    A l'int�rieur du constructeur de \c AddressBook, dans \c addressbook.cpp, nous
-    instancions \c nextButton et \c previousButton et nous les d�sactivons
-    par d�faut. Nous faisons ceci car la navigation ne doit �tre activ�e
+    A l'intérieur du constructeur de \c AddressBook, dans \c addressbook.cpp, nous
+    instancions \c nextButton et \c previousButton et nous les désactivons
+    par défaut. Nous faisons ceci car la navigation ne doit être activée
     que lorsqu'il y a plus d'un contact dans le carnet d'adresses.
 
     \snippet tutorials/addressbook/part3/addressbook.cpp navigation pushbuttons
 
-    Nous connectons alors ces boutons � leur slots respectifs:
+    Nous connectons alors ces boutons à leur slots respectifs:
 
     \snippet tutorials/addressbook/part3/addressbook.cpp connecting navigation signals
 
-    L'image ci-dessous montre l'interface utilisateur que nous allons cr�er.
-    Remarquez que cela ressemble de plus en plus � l'interface du programme
+    L'image ci-dessous montre l'interface utilisateur que nous allons créer.
+    Remarquez que cela ressemble de plus en plus à l'interface du programme
     complet.
 
     \image addressbook-tutorial-part3-screenshot.png
 
     Nous suivons les conventions pour les fonctions \c next() et \c previous()
-    en pla�ant \c nextButton � droite et \c previousButton � gauche. Pour
+    en plaçant \c nextButton à droite et \c previousButton à gauche. Pour
     faire cette mise en page intuitive, nous utilisons un QHBoxLayout pour
-    placer les widgets c�te � c�te:
+    placer les widgets côte à côte:
 
     \snippet tutorials/addressbook/part3/addressbook.cpp navigation layout
 
-    L'objet QHBoxLayout, \c buttonLayout2, est ensuite ajout� � \c mainLayout.
+    L'objet QHBoxLayout, \c buttonLayout2, est ensuite ajouté à \c mainLayout.
 
     \snippet tutorials/addressbook/part3/addressbook.cpp adding navigation layout
 
-    La figure ci-dessous montre les syst�mes de coordonn�es pour les widgets du
+    La figure ci-dessous montre les systèmes de coordonnées pour les widgets du
     \c mainLayout.
     \image addressbook-tutorial-part3-labeled-layout.png
 
-    Dans notre m�thode \c addContact(), nous avons desactiv� ces boutons 
-    pour �tre s�r que l'utilisateur n'utilise pas la navigation lors de 
+    Dans notre méthode \c addContact(), nous avons desactivé ces boutons 
+    pour être sûr que l'utilisateur n'utilise pas la navigation lors de 
     l'ajout d'un contact.
 
     \snippet tutorials/addressbook/part3/addressbook.cpp disabling navigation
 
-    Dans notre m�thode \c submitContact(), nous activons les boutons de
+    Dans notre méthode \c submitContact(), nous activons les boutons de
     navigation, \c nextButton et \c previousButton, en fonction de la
-    taille de \c contacts. Commen mentionn� plus t�t, la navigation n'est 
-    activ�e que si il y a plus d'un contact dans le carnet d'adresses.
+    taille de \c contacts. Commen mentionné plus tôt, la navigation n'est 
+    activée que si il y a plus d'un contact dans le carnet d'adresses.
     Les lignes suivantes montrent comment faire cela:
 
     \snippet tutorials/addressbook/part3/addressbook.cpp enabling navigation
 
     Nous incluons aussi ces lignes de code dans le bouton \c cancel().
 
-    Souvenez vous que nous voulons �muler une liste-li�e ciruculaire �
-    l'aide de l'objet QMap, \c contacts. Pour faire cela, nous obtenons un it�rateur 
-    sur \c contact dans la m�thode \c next(), et ensuite:
+    Souvenez vous que nous voulons émuler une liste-liée ciruculaire à
+    l'aide de l'objet QMap, \c contacts. Pour faire cela, nous obtenons un itérateur 
+    sur \c contact dans la méthode \c next(), et ensuite:
 
     \list
-        \o Si l'it�rateur n'est pas � la fin de \c contacts, nous l'incr�mentons
-        \o Si l'it�rateur est � la fin de \c contacts, nous changeons sa position
-        jusqu'au d�but de \c contacts. Cela donne l'illusion que notre QMap 
+        \o Si l'itérateur n'est pas à la fin de \c contacts, nous l'incrémentons
+        \o Si l'itérateur est à la fin de \c contacts, nous changeons sa position
+        jusqu'au début de \c contacts. Cela donne l'illusion que notre QMap 
         fonctionne comme une liste circulaire.
     \endlist
 
     \snippet tutorials/addressbook/part3/addressbook.cpp next() function
 
-    Une fois que nous avons it�r� jusqu'� l'objet recherch� dans \c contacts,
+    Une fois que nous avons itéré jusqu'à l'objet recherché dans \c contacts,
     nous affichons son contenu sur \c nameLine et \c addressText.
 
-    De la m�me fa�on, pour la m�thode \c previous(), nous obtenons un 
-    it�rateur sur \c contacts et ensuite:
+    De la même façon, pour la méthode \c previous(), nous obtenons un 
+    itérateur sur \c contacts et ensuite:
 
     \list
-        \o Si l'it�rateur est � la fin de \c contacts, on r�initialise
+        \o Si l'itérateur est à la fin de \c contacts, on réinitialise
            l'affichage et on retourne.
-        \o Si l'it�rateur est au d�but de \c contacts, on change sa 
-           position jusqu'� la fin
-        \o Ensuite, on d�cr�mente l'it�rateur
+        \o Si l'itérateur est au début de \c contacts, on change sa 
+           position jusqu'à la fin
+        \o Ensuite, on décrémente l'itérateur
     \endlist
 
     \snippet tutorials/addressbook/part3/addressbook.cpp previous() function
 
-    � nouveau, nous affichons le contenu de l'objet courant dans \c contacts.
+    à nouveau, nous affichons le contenu de l'objet courant dans \c contacts.
 
 */
 
@@ -540,27 +540,27 @@
     \contentspage {Tutoriel "Carnet d'adresses"}{Sommaire}
     \nextpage {tutorials/addressbook-fr/part5}{Chapitre 5}
     \example tutorials/addressbook-fr/part4
-    \title Carnet d'Adresses 4 - �diter et supprimer des adresses
+    \title Carnet d'Adresses 4 - éditer et supprimer des adresses
 
 
-    Dans ce chapitre, nous verrons comment modifier les donn�es des contacts
+    Dans ce chapitre, nous verrons comment modifier les données des contacts
     contenus dans l'application carnet d'adresses.
 
 
     \image addressbook-tutorial-screenshot.png
 
     Nous avons maintenant un carnet d'adresses qui ne se contente pas de
-    lister des contacts de fa�on ordonn�e, mais permet �galement la 
-    navigation. Il serait pratique d'inclure des fonctions telles qu'�diter et
-    supprimer, afin que les d�tails associ�s � un contact puissent �tre
-    modifi�s lorsque c'est n�cessaire. Cependant, cela requiert une l�g�re
-    modification, sous la forme d'�num�rations. Au chapitre pr�c�dent, nous avions deux
-    modes: \c {AddingMode} et \c {NavigationMode}, mais ils n'�taient pas
-    d�finis en tant qu'�num�rations. Au lieu de �a, on activait et d�sactivait les
+    lister des contacts de façon ordonnée, mais permet également la 
+    navigation. Il serait pratique d'inclure des fonctions telles qu'éditer et
+    supprimer, afin que les détails associés à un contact puissent être
+    modifiés lorsque c'est nécessaire. Cependant, cela requiert une légère
+    modification, sous la forme d'énumérations. Au chapitre précédent, nous avions deux
+    modes: \c {AddingMode} et \c {NavigationMode}, mais ils n'étaient pas
+    définis en tant qu'énumérations. Au lieu de ça, on activait et désactivait les
     boutons correspondants manuellement, au prix de multiples redondances dans
     le code.
 
-    Dans ce chapitre, on d�finit l'�num�ration \c Mode avec trois valeurs possibles.
+    Dans ce chapitre, on définit l'énumération \c Mode avec trois valeurs possibles.
 
     \list
         \o \c{NavigationMode},
@@ -568,22 +568,22 @@
         \o \c{EditingMode}.
     \endlist
 
-    \section1 D�finition de la classe AddressBook
+    \section1 Définition de la classe AddressBook
 
-    Le fichier \c addressbook.h est mis a jour pour contenir l'�num�ration \c Mode :
+    Le fichier \c addressbook.h est mis a jour pour contenir l'énumération \c Mode :
 
     \snippet tutorials/addressbook/part4/addressbook.h Mode enum
 
-    On ajoute �galement deux nouveaux slots, \c editContact() et
-    \c removeContact(), � notre liste de slots publics.
+    On ajoute également deux nouveaux slots, \c editContact() et
+    \c removeContact(), à notre liste de slots publics.
 
     \snippet tutorials/addressbook/part4/addressbook.h edit and remove slots
 
-    Afin de basculer d'un mode � l'autre, on introduit la m�thode
-    \c updateInterface() pour contr�ller l'activation et la d�sactivation de
-    tous les objets QPushButton. On ajoute �galement deux nouveaux boutons,
-    \c editButton et \c removeButton, pour les fonctions d'�dition
-    et de suppression mentionn�es plus haut.
+    Afin de basculer d'un mode à l'autre, on introduit la méthode
+    \c updateInterface() pour contrôller l'activation et la désactivation de
+    tous les objets QPushButton. On ajoute également deux nouveaux boutons,
+    \c editButton et \c removeButton, pour les fonctions d'édition
+    et de suppression mentionnées plus haut.
 
     \snippet tutorials/addressbook/part4/addressbook.h updateInterface() declaration
     \dots
@@ -591,97 +591,97 @@
     \dots
     \snippet tutorials/addressbook/part4/addressbook.h mode declaration
 
-    Enfin, on d�clare \c currentMode pour garder une trace du mode 
-    actuellement utilis�.
+    Enfin, on déclare \c currentMode pour garder une trace du mode 
+    actuellement utilisé.
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
-    Il nous faut maintenant impl�menter les fonctionnalit�s de changement de
+    Il nous faut maintenant implémenter les fonctionnalités de changement de
     mode de l'application carnet d'adresses. Les boutons \c editButton et
-    \c removeButton sont instanci�s et d�sactiv�s par d�faut, puisque le
-    carnet d'adresses d�marre sans aucun contact en m�moire.
+    \c removeButton sont instanciés et désactivés par défaut, puisque le
+    carnet d'adresses démarre sans aucun contact en mémoire.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp edit and remove buttons
 
-    Ces boutons sont ensuite connect�s � leurs slots respectifs,
-    \c editContact() et \c removeContact(), avant d'�tre ajout�s �
+    Ces boutons sont ensuite connectés à leurs slots respectifs,
+    \c editContact() et \c removeContact(), avant d'être ajoutés à
     \c buttonLayout1.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp connecting edit and remove
     \dots
     \snippet tutorials/addressbook/part4/addressbook.cpp adding edit and remove to the layout
 
-    La methode \c editContact() place les anciens d�tails du contact dans
+    La methode \c editContact() place les anciens détails du contact dans
     \c oldName et \c oldAddress, avant de basculer vers le mode
     \c EditingMode. Dans ce mode, les boutons \c submitButton et
-    \c cancelButton sont tous deux activ�s, l'utilisateur peut par cons�quent
-    modifier les d�tails du contact et cliquer sur l'un de ces deux boutons
+    \c cancelButton sont tous deux activés, l'utilisateur peut par conséquent
+    modifier les détails du contact et cliquer sur l'un de ces deux boutons
     par la suite.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp editContact() function
 
-    La m�thode \c submitContact() a �t� divis�e en deux avec un bloc
+    La méthode \c submitContact() a été divisée en deux avec un bloc
     \c{if-else}. On teste \c currentMode pour voir si le mode courant est
-    \c AddingMode. Si c'est le cas, on proc�de � l'ajout.
+    \c AddingMode. Si c'est le cas, on procède à l'ajout.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp submitContact() function beginning
     \dots
     \snippet tutorials/addressbook/part4/addressbook.cpp submitContact() function part1
 
     Sinon, on s'assure que \c currentMode est en \c EditingMode. Si c'est le
-    cas, on compare \c oldName et \c name. Si le nom a chang�, on supprime
-    l'ancien contact de \c contacts et on ins�re le contact mis a jour.
+    cas, on compare \c oldName et \c name. Si le nom a changé, on supprime
+    l'ancien contact de \c contacts et on insère le contact mis a jour.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp submitContact() function part2
 
-    Si seule l'adresse a chang� (i.e. \c oldAddress n'est pas identique �
-    \c address), on met � jour l'adresse du contact. Enfin on r�gle
-    \c currentMode � \c NavigationMode. C'est une �tape importante puisque
-    c'est cela qui r�active tous les boutons d�sactiv�s.
+    Si seule l'adresse a changé (i.e. \c oldAddress n'est pas identique à
+    \c address), on met à jour l'adresse du contact. Enfin on règle
+    \c currentMode à \c NavigationMode. C'est une étape importante puisque
+    c'est cela qui réactive tous les boutons désactivés.
 
-    Afin de retirer un contact du carnet d'adresses, on impl�mente la m�thode
-    \c removeContact(). Cette m�thode v�rifie que le contact est pr�sent dans
+    Afin de retirer un contact du carnet d'adresses, on implémente la méthode
+    \c removeContact(). Cette méthode vérifie que le contact est présent dans
     \c contacts.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp removeContact() function
 
-    Si c'est le cas, on affiche une bo�te de dialogue QMessageBox, demandant
-    confirmation de la suppression � l'utilisateur. Une fois la confirmation
-    effectu�e, on appelle \c previous(), afin de s'assurer que l'interface
-    utilisateur affiche une autre entr�e, et on supprime le contact en
-    utilisant le m�thode \l{QMap::remove()}{remove()} de \l{QMap}. Dans un
+    Si c'est le cas, on affiche une boîte de dialogue QMessageBox, demandant
+    confirmation de la suppression à l'utilisateur. Une fois la confirmation
+    effectuée, on appelle \c previous(), afin de s'assurer que l'interface
+    utilisateur affiche une autre entrée, et on supprime le contact en
+    utilisant le méthode \l{QMap::remove()}{remove()} de \l{QMap}. Dans un
     souci pratique, on informe l'utilisateur de la suppression par le biais
-    d'une autre QMessageBox. Les deux bo�tes de dialogue utilis�es dans cette
-    m�thode sont repr�sent�es ci-dessous.
+    d'une autre QMessageBox. Les deux boîtes de dialogue utilisées dans cette
+    méthode sont représentées ci-dessous.
 
     \image addressbook-tutorial-part4-remove.png
 
-    \section2 Mise � jour de l'Interface utilisateur
+    \section2 Mise à jour de l'Interface utilisateur
 
-    On a �voqu� plus haut la m�thode \c updateInterface() comme moyen
-    d'activer et de d�sactiver les diff�rents boutons de l'interface en
-    fonction du mode. Cette m�thode met � jour le mode courant selon
-    l'argument \c mode qui lui est pass�, en l'assignant � \c currentMode,
+    On a évoqué plus haut la méthode \c updateInterface() comme moyen
+    d'activer et de désactiver les différents boutons de l'interface en
+    fonction du mode. Cette méthode met à jour le mode courant selon
+    l'argument \c mode qui lui est passé, en l'assignant à \c currentMode,
     avant de tester sa valeur.
 
-    Chacun des boutons est ensuite activ� ou d�sactiv�, en fonction du mode.
+    Chacun des boutons est ensuite activé ou désactivé, en fonction du mode.
     Le code source pour les cas \c AddingMode et \c EditingMode est visible 
     ci-dessous:
 
     \snippet tutorials/addressbook/part4/addressbook.cpp update interface() part 1
 
     Dans le cas de \c NavigationMode, en revanche, des tests conditionnels
-    sont pass�s en param�tre de QPushButton::setEnabled(). Ceci permet de
-    s'assurer que les boutons \c editButton et \c removeButton ne sont activ�s
+    sont passés en paramètre de QPushButton::setEnabled(). Ceci permet de
+    s'assurer que les boutons \c editButton et \c removeButton ne sont activés
     que s'il existe au moins un contact dans le carnet d'adresses;
-    \c nextButton et \c previousButton ne sont activ�s que lorsqu'il existe
+    \c nextButton et \c previousButton ne sont activés que lorsqu'il existe
     plus d'un contact dans le carnet d'adresses.
 
     \snippet tutorials/addressbook/part4/addressbook.cpp update interface() part 2
 
-    En effectuant les op�rations de r�glage du mode et de mise � jour de
-    l'interface utilisateur au sein de la m�me m�thode, on est � l'abri de
-    l'�ventualit� o� l'interface utilisateur se "d�synchronise" de l'�tat
+    En effectuant les opérations de réglage du mode et de mise à jour de
+    l'interface utilisateur au sein de la même méthode, on est à l'abri de
+    l'éventualité où l'interface utilisateur se "désynchronise" de l'état
     interne de l'application.
 
 */
@@ -694,7 +694,7 @@
     \example tutorials/addressbook-fr/part5
     \title Carnet d'adresse 5 - Ajout d'une fonction de recherche
 
-    Dans ce chapitre, nous allons voir les possibilit�s pour rechercher
+    Dans ce chapitre, nous allons voir les possibilités pour rechercher
     des contacts dans le carnet d'adresse.
 
     \image addressbook-tutorial-part5-screenshot.png
@@ -703,110 +703,110 @@
     il devient difficile de naviguer avec les boutons \e Next et \e Previous.
     Dans ce cas, une fonction de recherche serait plus efficace pour rechercher
     les contacts.
-    La capture d'�cran ci-dessus montre le bouton de recherche \e Find et sa position
+    La capture d'écran ci-dessus montre le bouton de recherche \e Find et sa position
     dans le paneau de bouton.
 
     Lorsque l'utilisateur clique sur le bouton \e Find, il est courant d'afficher
-    une bo�te de dialogue qui demande � l'utilisateur d'entrer un nom de contact.
+    une boîte de dialogue qui demande à l'utilisateur d'entrer un nom de contact.
     Qt fournit la classe QDialog, que nous sous-classons dans ce chapitre pour
-    impl�menter la class \c FindDialog.
+    implémenter la class \c FindDialog.
 
-    \section1 D�finition de la classe FindDialog
+    \section1 Définition de la classe FindDialog
 
     \image addressbook-tutorial-part5-finddialog.png
 
-    Pour sous-classer QDialog, nous commen�ons par inclure le header de
-    QDialog dans le fichier \c finddialog.h. De plus, nous d�clarons les
+    Pour sous-classer QDialog, nous commençons par inclure le header de
+    QDialog dans le fichier \c finddialog.h. De plus, nous déclarons les
     classes QLineEdit et QPushButton car nous utilisons ces widgets dans
     notre classe dialogue.
 
     Tout comme dans la classe \c AddressBook, la classe \c FindDialog utilise
-    la macro Q_OBJECT et son constructeur est d�fini de fa�on � accepter
-    un QWidget parent, m�me si cette bo�te de dialogue sera affich�e dans une
-    fen�tre s�par�e.
+    la macro Q_OBJECT et son constructeur est défini de façon à accepter
+    un QWidget parent, même si cette boîte de dialogue sera affichée dans une
+    fenêtre séparée.
 
     \snippet tutorials/addressbook/part5/finddialog.h FindDialog header
 
-    Nous d�finissons la m�thode publique \c getFindText() pour �tre utilis�e
+    Nous définissons la méthode publique \c getFindText() pour être utilisée
     par les classes qui instancient \c FindDialog, ce qui leur permet d'obtenir
-    le texte entr� par l'utilisateur. Un slot public, \c findClicked(), est
-    d�fini pour prendre en charge le texte lorsque l'utilisateur clique sur
+    le texte entré par l'utilisateur. Un slot public, \c findClicked(), est
+    défini pour prendre en charge le texte lorsque l'utilisateur clique sur
     le bouton \gui Find.
 
-    Finalement, nous d�finissons les variables priv�es \c findButton,
+    Finalement, nous définissons les variables privées \c findButton,
     \c lineEdit et \c findText, qui correspondent respectivement au bouton
     \gui Find, au champ de texte dans lequel l'utilisateur tape le texte
-    � rechercher, et � une variable interne stockant le texte pour une
-    utilisation ult�rieure.
+    à rechercher, et à une variable interne stockant le texte pour une
+    utilisation ultérieure.
 
-    \section1 Impl�mentation de la classe FindDialog
+    \section1 Implémentation de la classe FindDialog
 
     Dans le constructeur de \c FindDialog, nous instancions les objets des
-    variables priv�es \c lineEdit, \c findButton et \c findText. Nous utilisons ensuite
+    variables privées \c lineEdit, \c findButton et \c findText. Nous utilisons ensuite
     un QHBoxLayout pour positionner les widgets.
 
     \snippet tutorials/addressbook/part5/finddialog.cpp constructor
 
-    Nous mettons en place la mise en page et le titre de la fen�tre, et
+    Nous mettons en place la mise en page et le titre de la fenêtre, et
     nous connectons les signaux aux slots. Remarquez que le signal
-    \l{QPushButton::clicked()}{clicked()} de \c{findButton} est connect�
-    � \c findClicked() et \l{QDialog::accept()}{accept()}. Le slot
+    \l{QPushButton::clicked()}{clicked()} de \c{findButton} est connecté
+    à \c findClicked() et \l{QDialog::accept()}{accept()}. Le slot
     \l{QDialog::accept()}{accept()} fourni par le QDialog ferme
-    la bo�te de dialogue et lui donne le code de retour \l{QDialog::}{Accepted}.
-    Nous utilisons cette fonction pour aider la m�thode \c findContact() de la classe
-    \c{AddressBook} � savoir si l'objet \c FindDialog a �t� ferm�. Ceci sera
-    expliqu� plus loin lorsque nous verrons la m�thode \c findContact().
+    la boîte de dialogue et lui donne le code de retour \l{QDialog::}{Accepted}.
+    Nous utilisons cette fonction pour aider la méthode \c findContact() de la classe
+    \c{AddressBook} à savoir si l'objet \c FindDialog a été fermé. Ceci sera
+    expliqué plus loin lorsque nous verrons la méthode \c findContact().
 
     \image addressbook-tutorial-part5-signals-and-slots.png
 
     Dans \c findClicked(), nous validons le champ de texte pour nous
-    assurer que l'utilisateur n'a pas cliqu� sur le bouton \gui Find sans
-    avoir entr� un nom de contact. Ensuite, nous stockons le texte du champ
-    d'entr�e \c lineEdit dans \c findText. Et finalement nous vidons le
-    contenu de \c lineEdit et cachons la bo�te de dialogue.
+    assurer que l'utilisateur n'a pas cliqué sur le bouton \gui Find sans
+    avoir entré un nom de contact. Ensuite, nous stockons le texte du champ
+    d'entrée \c lineEdit dans \c findText. Et finalement nous vidons le
+    contenu de \c lineEdit et cachons la boîte de dialogue.
 
     \snippet tutorials/addressbook/part5/finddialog.cpp findClicked() function
 
-    La variable \c findText a un accesseur publique associ�: \c getFindText().
-    �tant donn� que nous ne modifions \c findText directement que dans le
-    constructeur et la m�thode \c findClicked(), nous ne cr�ons pas
-    de manipulateurs associ� � \c getFindText().
+    La variable \c findText a un accesseur publique associé: \c getFindText().
+    Étant donné que nous ne modifions \c findText directement que dans le
+    constructeur et la méthode \c findClicked(), nous ne créons pas
+    de manipulateurs associé à \c getFindText().
     Puisque \c getFindText() est publique, les classes instanciant et
-    utilisant \c FindDialog peuvent toujours acc�der � la cha�ne de
-    caract�res que l'utilisateur a entr� et accept�.
+    utilisant \c FindDialog peuvent toujours accéder à la chaîne de
+    caractères que l'utilisateur a entré et accepté.
 
     \snippet tutorials/addressbook/part5/finddialog.cpp getFindText() function
 
-    \section1 D�finition de la classe AddressBook
+    \section1 Définition de la classe AddressBook
 
     Pour utiliser \c FindDialog depuis la classe \c AddressBook, nous
     incluons \c finddialog.h dans le fichier \c addressbook.h.
 
     \snippet tutorials/addressbook/part5/addressbook.h include finddialog's header
 
-    Jusqu'ici, toutes les fonctionnalit�s du carnet d'adresses ont un
-    QPushButton et un slot correspondant. De la m�me fa�on, pour la
-    fonctionnalit� \gui Find, nous avons \c findButton et \c findContact().
+    Jusqu'ici, toutes les fonctionnalités du carnet d'adresses ont un
+    QPushButton et un slot correspondant. De la même façon, pour la
+    fonctionnalité \gui Find, nous avons \c findButton et \c findContact().
 
-    Le \c findButton est d�clar� comme une variable priv�e et la
-    m�thode \c findContact() est d�clar�e comme un slot public.
+    Le \c findButton est déclaré comme une variable privée et la
+    méthode \c findContact() est déclarée comme un slot public.
 
     \snippet tutorials/addressbook/part5/addressbook.h findContact() declaration
     \dots
     \snippet tutorials/addressbook/part5/addressbook.h findButton declaration
 
-    Finalement, nous d�clarons la variable priv�e \c dialog que nous allons
-    utiliser pour acc�der � une instance de \c FindDialog.
+    Finalement, nous déclarons la variable privée \c dialog que nous allons
+    utiliser pour accéder à une instance de \c FindDialog.
 
     \snippet tutorials/addressbook/part5/addressbook.h FindDialog declaration
 
-    Une fois que nous avons instanci� la bo�te de dialogue, nous voulons l'utiliser
-    plus qu'une fois. Utiliser une variable priv�e nous permet d'y r�f�rer
-    � plus d'un endroit dans la classe.
+    Une fois que nous avons instancié la boîte de dialogue, nous voulons l'utiliser
+    plus qu'une fois. Utiliser une variable privée nous permet d'y référer
+    à plus d'un endroit dans la classe.
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
-    Dans le constructeur de \c AddressBook, nous instancions nos objets priv�s,
+    Dans le constructeur de \c AddressBook, nous instancions nos objets privés,
     \c findbutton et \c findDialog:
 
     \snippet tutorials/addressbook/part5/addressbook.cpp instantiating findButton
@@ -814,25 +814,25 @@
     \snippet tutorials/addressbook/part5/addressbook.cpp instantiating FindDialog
 
     Ensuite, nous connectons le signal \l{QPushButton::clicked()}{clicked()} de
-    \c{findButton} � \c findContact().
+    \c{findButton} à \c findContact().
 
     \snippet tutorials/addressbook/part5/addressbook.cpp signals and slots for find
 
-    Maintenant, tout ce qui manque est le code de notre m�thode \c findContact():
+    Maintenant, tout ce qui manque est le code de notre méthode \c findContact():
 
     \snippet tutorials/addressbook/part5/addressbook.cpp findContact() function
 
-    Nous commen�ons par afficher l'instance de \c FindDialog, \c dialog.
-    L'utilisateur peut alors entrer le nom du contact � rechercher. Lorsque
-    l'utilisateur clique sur le bouton \c findButton, la bo�te de dialogue est
-    masqu�e et le code de retour devient QDialog::Accepted. Ce code de retour
+    Nous commençons par afficher l'instance de \c FindDialog, \c dialog.
+    L'utilisateur peut alors entrer le nom du contact à rechercher. Lorsque
+    l'utilisateur clique sur le bouton \c findButton, la boîte de dialogue est
+    masquée et le code de retour devient QDialog::Accepted. Ce code de retour
     vient remplir la condition du premier if.
 
     Ensuite, nous extrayons le texte que nous utiliserons pour la recherche,
-    il s'agit ici de \c contactName obtenu � l'aide de la m�thode \c getFindText()
+    il s'agit ici de \c contactName obtenu à l'aide de la méthode \c getFindText()
     de \c FindDialog. Si le contact existe dans le carnet d'adresse, nous
     l'affichons directement. Sinon, nous affichons le QMessageBox suivant pour
-    indiquer que la recherche � �chou�e.
+    indiquer que la recherche à échouée.
 
     \image addressbook-tutorial-part5-notfound.png
 */
@@ -845,49 +845,49 @@
     \example tutorials/addressbook-fr/part6
     \title Carnet d'Adresses 6 - Sauvegarde et chargement
 
-    Ce chapitre couvre les fonctionnalit�s de gestion des fichiers de Qt que
-    l'on utilise pour �crire les proc�dures de sauvegarde et chargement pour
+    Ce chapitre couvre les fonctionnalités de gestion des fichiers de Qt que
+    l'on utilise pour écrire les procédures de sauvegarde et chargement pour
     l'application carnet d'adresses.
 
     \image addressbook-tutorial-part6-screenshot.png
 
     Bien que la navigation et la recherche de contacts soient des
-    fonctionnalit�s importantes, notre carnet d'adresses ne sera pleinement
+    fonctionnalités importantes, notre carnet d'adresses ne sera pleinement
     utilisable qu'une fois que l'on pourra sauvegarder les contacts existants
-    et les charger � nouveau par la suite.
-    Qt fournit de nombreuses classes pour g�rer les \l{Input/Output and
-    Networking}{entr�es et sorties}, mais nous avons choisi de nous contenter d'une
-    combinaison de deux classes simples � utiliser ensemble: QFile et QDataStream.
+    et les charger à nouveau par la suite.
+    Qt fournit de nombreuses classes pour gérer les \l{Input/Output and
+    Networking}{entrées et sorties}, mais nous avons choisi de nous contenter d'une
+    combinaison de deux classes simples à utiliser ensemble: QFile et QDataStream.
 
-    Un objet QFile repr�sente un fichier sur le disque qui peut �tre lu, et
-    dans lequel on peut �crire. QFile est une classe fille de la classe plus
-    g�n�rique QIODevice, qui peut repr�senter diff�rents types de
-    p�riph�riques.
+    Un objet QFile représente un fichier sur le disque qui peut être lu, et
+    dans lequel on peut écrire. QFile est une classe fille de la classe plus
+    générique QIODevice, qui peut représenter différents types de
+    périphériques.
 
-    Un objet QDataStream est utilis� pour s�rialiser des donn�es binaires
-    dans le but de les passer � un QIODevice pour les r�cup�rer dans le
-    futur. Pour lire ou �crire dans un QIODevice, il suffit d'ouvrir le
-    flux, avec le p�riph�rique appropri� en param�tre, et d'y lire ou
-    �crire.
+    Un objet QDataStream est utilisé pour sérialiser des données binaires
+    dans le but de les passer à un QIODevice pour les récupérer dans le
+    futur. Pour lire ou écrire dans un QIODevice, il suffit d'ouvrir le
+    flux, avec le périphérique approprié en paramètre, et d'y lire ou
+    écrire.
 
-    \section1 D�finition de la classe AddressBook
+    \section1 Définition de la classe AddressBook
 
-    On d�clare deux slots publics, \c saveToFile() et \c loadFromFile(), 
+    On déclare deux slots publics, \c saveToFile() et \c loadFromFile(), 
     ainsi que deux objets QPushButton, \c loadButton et \c saveButton.
 
     \snippet tutorials/addressbook/part6/addressbook.h save and load functions declaration
     \dots
     \snippet tutorials/addressbook/part6/addressbook.h save and load buttons declaration
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
     Dans notre constructeur, on instancie \c loadButton et \c saveButton.
-    Id�alement, l'interface serait plus conviviale avec des boutons
+    Idéalement, l'interface serait plus conviviale avec des boutons
     affichant "Load contacts from a file" et "Save contacts to a file". Mais
     compte tenu de la dimension des autres boutons, on initialise les labels
-    des boutons � \gui{Load...} et \gui{Save...}. Heureusement, Qt offre une
-    fa�on simple d'ajouter des info-bulles avec
-    \l{QWidget::setToolTip()}{setToolTip()}, et nous l'exploitons de la fa�on
+    des boutons à \gui{Load...} et \gui{Save...}. Heureusement, Qt offre une
+    façon simple d'ajouter des info-bulles avec
+    \l{QWidget::setToolTip()}{setToolTip()}, et nous l'exploitons de la façon
     suivante pour nos boutons:
 
     \snippet tutorials/addressbook/part6/addressbook.cpp tooltip 1
@@ -895,85 +895,85 @@
     \snippet tutorials/addressbook/part6/addressbook.cpp tooltip 2
 
     Bien qu'on ne cite pas le code correspondant ici, nous ajoutons ces deux boutons au
-    layout de droite, \c button1Layout, comme pour les fonctionnalit�s pr�c�dentes, et 
+    layout de droite, \c button1Layout, comme pour les fonctionnalités précédentes, et 
     nous connectons leurs signaux
-    \l{QPushButton::clicked()}{clicked()} � leurs slots respectifs.
+    \l{QPushButton::clicked()}{clicked()} à leurs slots respectifs.
 
-    Pour la sauvegarde, on commence par r�cup�rer le nom de fichier 
+    Pour la sauvegarde, on commence par récupérer le nom de fichier 
     \c fileName, en utilisant QFileDialog::getSaveFileName(). C'est une
-    m�thode pratique fournie par QFileDialog, qui ouvre une bo�te de
-    dialogue modale et permet � l'utilisateur d'entrer un nom de fichier ou
+    méthode pratique fournie par QFileDialog, qui ouvre une boîte de
+    dialogue modale et permet à l'utilisateur d'entrer un nom de fichier ou
     de choisir un fichier \c{.abk} existant. Les fichiers \c{.abk}
-    correspondent � l'extension choisie pour la sauvegarde des contacts de
+    correspondent à l'extension choisie pour la sauvegarde des contacts de
     notre carnet d'adresses.
 
     \snippet tutorials/addressbook/part6/addressbook.cpp saveToFile() function part1
 
-    La bo�te de dialogue affich�e est visible sur la capture d'�cran ci-
+    La boîte de dialogue affichée est visible sur la capture d'écran ci-
     dessous.
 
     \image addressbook-tutorial-part6-save.png
 
-    Si \c fileName n'est pas vide, on cr�e un objet QFile, \c file, � partir
-    de \c fileName. QFile fonctionne avec QDataStream puisqu'il d�rive de
+    Si \c fileName n'est pas vide, on crée un objet QFile, \c file, à partir
+    de \c fileName. QFile fonctionne avec QDataStream puisqu'il dérive de
     QIODevice.
 
-    Ensuite, on essaie d'ouvrir le fichier en �criture, ce qui correspond au
-    mode \l{QIODevice::}{WriteOnly}. Si cela �choue, on en informe
+    Ensuite, on essaie d'ouvrir le fichier en écriture, ce qui correspond au
+    mode \l{QIODevice::}{WriteOnly}. Si cela échoue, on en informe
     l'utilisateur avec une QMessageBox.
 
     \snippet tutorials/addressbook/part6/addressbook.cpp saveToFile() function part2
 
     Dans le cas contraire, on instancie un objet QDataStream, \c out, afin
-    d'�crire dans le fichier ouvert. QDataStream n�cessite que la m�me
-    version de flux soit utilis�e pour la lecture et l'�criture. On s'assure
-    que c'est le cas en sp�cifiant explicitement d'utiliser la
+    d'écrire dans le fichier ouvert. QDataStream nécessite que la même
+    version de flux soit utilisée pour la lecture et l'écriture. On s'assure
+    que c'est le cas en spécifiant explicitement d'utiliser la
     \l{QDataStream::Qt_4_5}{version introduite avec Qt 4.5} avant de
-    s�rialiser les donn�es vers le fichier \c file.
+    sérialiser les données vers le fichier \c file.
 
     \snippet tutorials/addressbook/part6/addressbook.cpp saveToFile() function part3
 
-    Pour le chargement, on r�cup�re �galement \c fileName en utilisant
-    QFileDialog::getOpenFileName(). Cette m�thode est l'homologue de
-    QFileDialog::getSaveFileName() et affiche �galement une bo�te de
-    dialogue modale permettant � l'utilisateur d'entrer un nom de fichier ou
+    Pour le chargement, on récupère également \c fileName en utilisant
+    QFileDialog::getOpenFileName(). Cette méthode est l'homologue de
+    QFileDialog::getSaveFileName() et affiche également une boîte de
+    dialogue modale permettant à l'utilisateur d'entrer un nom de fichier ou
     de selectionner un fichier \c{.abk} existant, afin de le charger dans le
     carnet d'adresses.
 
     \snippet tutorials/addressbook/part6/addressbook.cpp loadFromFile() function part1
 
-    Sous Windows, par exemple, cette m�thode affiche une bo�te de dialogue
-    native pour la s�lection de fichier, comme illustr� sur la capture
-    d'�cran suivante:
+    Sous Windows, par exemple, cette méthode affiche une boîte de dialogue
+    native pour la sélection de fichier, comme illustré sur la capture
+    d'écran suivante:
 
     \image addressbook-tutorial-part6-load.png
 
     Si \c fileName n'est pas vide, on utilise une fois de plus un objet
     QFile, \c file, et on tente de l'ouvrir en lecture, avec le mode
-    \l{QIODevice::}{ReadOnly}. De m�me que pr�c�demment dans notre
-    impl�mentation de \c saveToFile(), si cette tentative s'av�re
+    \l{QIODevice::}{ReadOnly}. De même que précédemment dans notre
+    implémentation de \c saveToFile(), si cette tentative s'avère
     infructueuse, on en informe l'utilisateur par le biais d'une
     QMessageBox.
 
     \snippet tutorials/addressbook/part6/addressbook.cpp loadFromFile() function part2
 
     Dans le cas contraire, on instancie un objet QDataStream, \c in, en
-    sp�cifiant la version � utiliser comme pr�c�demment, et on lit les
-    informations s�rialis�es vers la structure de donn�es \c contacts. Notez
+    spécifiant la version à utiliser comme précédemment, et on lit les
+    informations sérialisées vers la structure de données \c contacts. Notez
     qu'on purge \c contacts avant d'y mettre les informations lues afin de
-    simplifier le processus de lecture de fichier. Une fa�on plus avanc�e de
-    proc�der serait de lire les contacts dans un objet QMap temporaire, et
+    simplifier le processus de lecture de fichier. Une façon plus avancée de
+    procéder serait de lire les contacts dans un objet QMap temporaire, et
     de copier uniquement les contacts n'existant pas encore dans
     \c contacts.
 
     \snippet tutorials/addressbook/part6/addressbook.cpp loadFromFile() function part3
 
     Pour afficher les contacts lus depuis le fichier, on doit d'abord
-    valider les donn�es obtenues afin de s'assurer que le fichier lu
-    contient effectivement des entr�es de carnet d'adresses. Si c'est le
+    valider les données obtenues afin de s'assurer que le fichier lu
+    contient effectivement des entrées de carnet d'adresses. Si c'est le
     cas, on affiche le premier contact; sinon on informe l'utilisateur du
-    probl�me par une QMessageBox. Enfin, on met � jour l'interface afin
-    d'activer et de d�sactiver les boutons de fa�on appropri�e.
+    problème par une QMessageBox. Enfin, on met à jour l'interface afin
+    d'activer et de désactiver les boutons de façon appropriée.
 */
 
 /*!
@@ -981,86 +981,86 @@
     \previouspage {tutorials/addressbook-fr/part6}{Chapitre 6}
     \contentspage {Tutoriel "Carnet d'adresses"}{Sommaire}
     \example tutorials/addressbook-fr/part7
-    \title Carnet d'adresse 7 - Fonctionnalit�s avanc�es
+    \title Carnet d'adresse 7 - Fonctionnalités avancées
 
-    Ce chapitre couvre quelques fonctionnalit�s additionnelles qui
+    Ce chapitre couvre quelques fonctionnalités additionnelles qui
     feront de notre carnet d'adresses une application plus pratique
     pour une utilisation quotidienne.
 
     \image addressbook-tutorial-part7-screenshot.png
 
     Bien que notre application carnet d'adresses soit utile en tant que telle,
-    il serait pratique de pouvoir �changer les contacts avec d'autres applications.
-    Le format vCard est un un format de fichier populaire pour �changer
-    ce type de donn�es.
-    Dans ce chapitre, nous �tendrons notre carnet d'adresses pour permettre
+    il serait pratique de pouvoir échanger les contacts avec d'autres applications.
+    Le format vCard est un un format de fichier populaire pour échanger
+    ce type de données.
+    Dans ce chapitre, nous étendrons notre carnet d'adresses pour permettre
     d'exporter des contacts dans des fichiers vCard \c{.vcf}.
 
-    \section1 D�finition de la classe AddressBook
+    \section1 Définition de la classe AddressBook
 
     Nous ajoutons un objet QPushButton, \c exportButton, et un slot
-    public correspondant, \c exportAsVCard(), � notre classe \c AddressBook 
+    public correspondant, \c exportAsVCard(), à notre classe \c AddressBook 
     dans le fichier \c addressbook.h.
 
     \snippet tutorials/addressbook/part7/addressbook.h exportAsVCard() declaration
     \dots
     \snippet tutorials/addressbook/part7/addressbook.h exportButton declaration
 
-    \section1 Impl�mentation de la classe AddressBook
+    \section1 Implémentation de la classe AddressBook
 
     Dans le constructeur de \c AddressBook, nous connectons le signal
     \l{QPushButton::clicked()}{clicked()} de \c{exportButton} au slot
     \c exportAsVCard().
-    Nous ajoutons aussi ce bouton � \c buttonLayout1, le layout responsable
+    Nous ajoutons aussi ce bouton à \c buttonLayout1, le layout responsable
     du groupe de boutons sur la droite.
 
-    Dans la m�thode \c exportAsVCard(), nous commen�ons par extraire le
-    nom du contact dans \n name. Nous d�clarons \c firstname, \c lastName et
+    Dans la méthode \c exportAsVCard(), nous commençons par extraire le
+    nom du contact dans \n name. Nous déclarons \c firstname, \c lastName et
     \c nameList.
     Ensuite, nous cherchons la position du premier espace blanc de \c name.
-    Si il y a un espace, nous s�parons le nom du contact en \c firstName et
-    \c lastName. Finalement, nous rempla�ons l'espace par un underscore ("_").
+    Si il y a un espace, nous séparons le nom du contact en \c firstName et
+    \c lastName. Finalement, nous remplaçons l'espace par un underscore ("_").
     Si il n'y a pas d'espace, nous supposons que le contact ne comprend que
-    le pr�nom.
+    le prénom.
 
     \snippet tutorials/addressbook/part7/addressbook.cpp export function part1
 
-    Comme pour la m�thode \c saveToFile(), nous ouvrons une bo�te de dialogue
-    pour donner la possibilit� � l'utilisateur de choisir un emplacement pour
-    le fichier. Avec le nom de fichier choisi, nous cr�ons une instance de QFile
-    pour y �crire.
+    Comme pour la méthode \c saveToFile(), nous ouvrons une boîte de dialogue
+    pour donner la possibilité à l'utilisateur de choisir un emplacement pour
+    le fichier. Avec le nom de fichier choisi, nous créons une instance de QFile
+    pour y écrire.
 
     Nous essayons d'ouvrir le fichier en mode \l{QIODevice::}{WriteOnly}. Si
-    cela �choue, nous affichons un QMessageBox pour informer l'utilisateur
-    � propos de l'origine du probl�me et nous quittons la m�thode. Sinon, nous passons le
-    fichier comme param�tre pour cr�er un objet QTextStream, \c out. De la m�me fa�on que
-    QDataStream, la classe QTextStream fournit les fonctionnalit�s pour 
-    lire et �crire des fichiers de texte. Gr�ce � cel�, le fichier \c{.vcf}
-    g�n�r� pourra �tre ouvert et �dit� � l'aide d'un simple �diteur de texte.
+    cela échoue, nous affichons un QMessageBox pour informer l'utilisateur
+    à propos de l'origine du problème et nous quittons la méthode. Sinon, nous passons le
+    fichier comme paramètre pour créer un objet QTextStream, \c out. De la même façon que
+    QDataStream, la classe QTextStream fournit les fonctionnalités pour 
+    lire et écrire des fichiers de texte. Grâce à celà, le fichier \c{.vcf}
+    généré pourra être ouvert et édité à l'aide d'un simple éditeur de texte.
 
     \snippet tutorials/addressbook/part7/addressbook.cpp export function part2
 
-    Nous �crivons ensuite un fichier vCard avec la balise \c{BEGIN:VCARD},
+    Nous écrivons ensuite un fichier vCard avec la balise \c{BEGIN:VCARD},
     suivit par \c{VERSION:2.1}.
-    Le nom d'un contact est �crit � l'aide de la balise \c{N:}. Pour la balise
-    \c{FN:}, qui remplit le titre du contact, nous devons v�rifier si le contact
-    � un nom de famille d�fini ou non. Si oui, nous utilions les d�tails de
-    \c nameList pour remplir le champ, dans le cas contraire on �crit uniquement le contenu
+    Le nom d'un contact est écrit à l'aide de la balise \c{N:}. Pour la balise
+    \c{FN:}, qui remplit le titre du contact, nous devons vérifier si le contact
+    à un nom de famille défini ou non. Si oui, nous utilions les détails de
+    \c nameList pour remplir le champ, dans le cas contraire on écrit uniquement le contenu
     de \c firstName.
  
     \snippet tutorials/addressbook/part7/addressbook.cpp export function part3
 
-    Nous continuons en �crivant l'adresse du contact. Les points-virgules
-    dans l'adresse sont �chapp�s � l'aide de "\\", les retours de ligne sont
-    remplac�s par des points-virgules, et les vigules sont remplac�es par des espaces.
-    Finalement nous �crivons les balises  \c{ADR;HOME:;} suivies par l'adresse
+    Nous continuons en écrivant l'adresse du contact. Les points-virgules
+    dans l'adresse sont échappés à l'aide de "\\", les retours de ligne sont
+    remplacés par des points-virgules, et les vigules sont remplacées par des espaces.
+    Finalement nous écrivons les balises  \c{ADR;HOME:;} suivies par l'adresse
     et la balise \c{END:VCARD}.
 
     \snippet tutorials/addressbook/part7/addressbook.cpp export function part4
 
-    � la fin de la m�thode, un QMessageBox est affich� pour informer l'utilisateur
-    que la vCard a �t� export�e avec succ�s. 
+    À la fin de la méthode, un QMessageBox est affiché pour informer l'utilisateur
+    que la vCard a été exportée avec succès. 
 
-    \e{vCard est une marque d�pos�e de \l{http://www.imc.org}
+    \e{vCard est une marque déposée de \l{http://www.imc.org}
     {Internet Mail Consortium}}.
 */
diff --git a/doc/src/widgets-and-layouts/stylesheet.qdoc b/doc/src/widgets-and-layouts/stylesheet.qdoc
index 5f42f28..4d55066 100644
--- a/doc/src/widgets-and-layouts/stylesheet.qdoc
+++ b/doc/src/widgets-and-layouts/stylesheet.qdoc
@@ -934,8 +934,8 @@
            subcontrol.
 
            For items with a sub menu, the arrow marks are styled using the
-           \l{::right-arrow-sub}{right-arrow} and
-           \l{::left-arrow-sub}{left-arrow}.
+           \l{right-arrow-sub}{right-arrow} and
+           \l{left-arrow-sub}{left-arrow}.
 
             The scroller is styled using the \l{#scroller-sub}{::scroller}.
 
diff --git a/doc/src/xml-processing/xml-patterns.qdoc b/doc/src/xml-processing/xml-patterns.qdoc
index 1a9f76d..408b2da 100644
--- a/doc/src/xml-processing/xml-patterns.qdoc
+++ b/doc/src/xml-processing/xml-patterns.qdoc
@@ -83,7 +83,7 @@
 
     First, the query opens a \c{<bibliography>} element in the
     output. The
-    \l{xquery-introduction.html#using-path-expressions-to-match-select-items}
+    \l{xquery-introduction.html#using-path-expressions-to-match-and-select-items}
     {embedded path expression} then loads the XML document describing
     the contents of the library (\c{library.xml}) and begins the
     search. For each \c{<book>} element it finds, where the publisher
diff --git a/doc/src/xml-processing/xquery-introduction.qdoc b/doc/src/xml-processing/xquery-introduction.qdoc
index 84e21ab..9306420 100644
--- a/doc/src/xml-processing/xquery-introduction.qdoc
+++ b/doc/src/xml-processing/xquery-introduction.qdoc
@@ -75,7 +75,7 @@ It creates a new \c{<html>} element in the output and sets its \c{id}
 attribute to be the \c{id} attribute from an \c{<html>} element in the
 \c{other.html} file.
 
-\section1 Using Path Expressions To Match & Select Items
+\section1 Using Path Expressions To Match And Select Items
 
 In C++ and Java, we write nested \c{for} loops and recursive functions
 to traverse XML trees in search of elements of interest. In XQuery, we
diff --git a/doc/src/zh_CN/getting-started/how-to-learn-qt.qdoc b/doc/src/zh_CN/getting-started/how-to-learn-qt.qdoc
new file mode 100644
index 0000000..1c2f56b
--- /dev/null
+++ b/doc/src/zh_CN/getting-started/how-to-learn-qt.qdoc
@@ -0,0 +1,96 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \page how-to-learn-qt.html
+    \title 如何学习 Qt
+    \brief Links to guides and resources for learning Qt.
+    \nextpage 教程
+
+    \section1 Getting Started
+
+    我们假定您已了解 C++， 并将用于 Qt 开发。有关将 Qt 与其他编程语言一起使用的更多信息，请参见 \l{Qt website}{Qt 网站}。
+
+    如果你想仅使用 C++ 编程, 不使用任何设计工具而仅使用代码设计用户界面，请观看\l{教程}。这些教程是为您了解 Qt 编程量身定做的，并侧重于编写可用代码，而并非功能简介。
+
+    如果您想使用设计工具来设计用户界面，则至少要阅读 \l{Qt Designer manual}{Qt 设计者手册}的前几章。
+
+    现在您已经编写了一些小型可用的应用程序，并对 Qt 编程有更加广泛的了解。您可以直接着手做自己的项目，但我们建议您阅读以下一些关键简介以加深您对 Qt 的了解：\l{Qt Object Model}Qt 对象模型}和\l{Signals and Slots}{信号和槽}。
+
+    \beginfloatleft
+    \inlineimage qtdemo-small.png
+    \endfloat
+
+    \section1 了解概况
+
+    在这个阶段，我们建议您浏览一下\l{All Overviews and HOWTOs}{简介}，然后阅读与您项目相关的章节。您可能还会发现，浏览与您项目类似的\l{Qt Examples}{示例}的源代码也会对您有所帮助。由于 Qt 源代码已面向公众开放，您也可阅读 Qt 源代码。
+
+    如果您运行\l{Examples and Demos Launcher}{示例和演示启动程序}，您就会看到许多正在使用的 Qt widget。
+
+    \l{Qt Widget Gallery} 还按照在不同支持平台上的使用风格提供了精选 Qt widget 简介。
+    \clearfloat
+
+    \section1 Books and Learning Materials
+
+    Qt 附带大量文档，并全文带有超文本交叉引用，可轻松地点击了解自己想知道的内容。您使用最多的文档可能是 \l{index.html}{API 引用}。每个链接都提供了浏览 API 引用的不同方式，您可每个都尝试一下，看哪个更适合自己。您还可以尝试 \l{Qt Assistant}，这是随 Qt 附带的工具，可访问全部 Qt API，并提供全文本搜索功能。
+
+    有大量的书籍是关于 Qt 编程的。有关 Qt 书籍的完整列表。
+    We recommend the official Qt book,
+    \l{http://www.amazon.com/gp/product/0132354160/ref=ase_trolltech/}{C++
+    GUI Programming with Qt 4, Second Edition} (ISBN 0-13-235416-0).
+    本书从 "Hello Qt" 到高级功能（如多线程、2D 和 3D 图形、网络、内容视图类与 XML），全面详实地说明了 Qt 编程。（第一版基于 Qt 4.1，可\l{http://www.qtrac.eu/C++-GUI-Programming-with-Qt-4-1st-ed.zip}{在线}获得。）
+
+    包括不同语言的翻译版本，请参见\l{Books about Qt Programming}{有关 Qt 编程的书籍}。
+
+    另一个有关实例代码和 Qt 功能说明的有用资源就是存档的 \l{Qt Quarterly}{Qt 季讯}文章，季讯是为 Qt 用户提供的新闻时讯。
+
+    有关特定 Qt 模块和其他指南的文档，请参见\l{All Overviews and HOWTOs}。
+
+    \section1 Further Reading
+
+    Qt has an active and helpful user community who communicate using
+    the \l{Qt Mailing Lists}{qt-interest} mailing list, the \l{Qt Centre}
+    Web site, and a number of other community Web sites and Weblogs.
+    In addition, many Qt developers are active members of the
+    \l{KDE}{KDE community}.
+
+    祝您好运并且学习愉快！
+*/
diff --git a/doc/src/zh_CN/getting-started/tutorials.qdoc b/doc/src/zh_CN/getting-started/tutorials.qdoc
new file mode 100644
index 0000000..dc371d8
--- /dev/null
+++ b/doc/src/zh_CN/getting-started/tutorials.qdoc
@@ -0,0 +1,100 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \page tutorials.html
+    \title 教程
+
+    \contentspage 如何学习 Qt
+
+    \brief Tutorials, guides and overviews to help you learn Qt.
+
+    A collection of tutorials and "walkthrough" guides are provided with Qt to
+    help new users get started with Qt development. These documents cover a
+    range of topics, from basic use of widgets to step-by-step tutorials that
+    show how an application is put together.
+
+    \table
+    \row
+    \o{2,1} \l{Widgets 教程}{\bold Widgets}
+    \o{2,1} \l{地址簿教程}{\bold {地址簿}}
+    \row
+    \o \image widget-examples.png Widgets
+    \o
+    A beginner's guide to getting started with widgets and layouts to create
+    GUI applications.
+
+    \o \image addressbook-tutorial.png 地址簿
+    \o
+    A seven part guide to creating a fully-functioning address book
+    application. This tutorial is also available with
+    \l{Tutoriel "Carnet d'adresses"}{French explanation}.
+
+    \row
+    \o{2,1} \l{A Quick Start to Qt Designer}{\bold{Qt Designer}}
+    \o{2,1} \l{Qt Linguist Manual: Programmers#Tutorials}{\bold {Qt Linguist}}
+    \row
+    \o \image designer-examples.png QtDesigner
+    \o
+    A quick guide through \QD showing the basic steps to create a
+    form with this interactive tool.
+
+    \o \image linguist-examples.png QtLinguist
+    \o
+    A guided tour through the translations process, explaining the
+    tools provided for developers, translators and release managers.
+
+    \row
+    \o{2,1} \l{QTestLib Tutorial}{\bold QTestLib}
+    \o{2,1} \l{qmake Tutorial}{\bold qmake}
+    \row
+    \o{2,1}
+    This tutorial gives a short introduction to how to use some of the
+    features of Qt's unit-testing framework, QTestLib. It is divided into
+    four chapters.
+
+    \o{2,1}
+    This tutorial teaches you how to use \c qmake. We recommend that
+    you read the \l{qmake Manual}{qmake user guide} after completing
+    this tutorial.
+
+    \endtable
+*/
diff --git a/doc/src/zh_CN/tutorials/addressbook.qdoc b/doc/src/zh_CN/tutorials/addressbook.qdoc
new file mode 100644
index 0000000..72349af
--- /dev/null
+++ b/doc/src/zh_CN/tutorials/addressbook.qdoc
@@ -0,0 +1,673 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \page tutorials-addressbook.html
+
+    \startpage {index.html}{Qt Reference Documentation}
+    \contentspage 教程
+    \nextpage {tutorials/addressbook/part1}{第一章}
+
+    \title 地址簿教程
+    \brief 本教程介绍了使用 Qt 跨平台框架的 GUI 编程。
+
+    本教程介绍了使用 Qt 跨平台框架的 GUI 编程。
+
+    \image addressbook-tutorial-screenshot.png
+
+    \omit
+    It doesn't cover everything; the emphasis is on teaching the programming
+    philosophy of GUI programming, and Qt's features are introduced as needed.
+    Some commonly used features are never used in this tutorial.
+    \endomit
+
+    在学习过程中，我们将了解部分 Qt 基本技术，如
+
+    \list
+    \o Widget 和布局管理器
+    \o 容器类
+    \o 信号和槽
+    \o 输入和输出设备
+    \endlist
+
+    如果您完全不了解 Qt，请阅读\l{How to Learn Qt}{如何学习 Qt}（如果您还未阅读）。
+
+    教程的源代码位于 Qt 的 \c examples/tutorials/addressbook 目录下。
+
+    教程章节：
+
+    \list 1
+    \o \l{tutorials/addressbook/part1}{设计用户界面}
+    \o \l{tutorials/addressbook/part2}{添加地址}
+    \o \l{tutorials/addressbook/part3}{浏览地址簿条目}
+    \o \l{tutorials/addressbook/part4}{编辑和删除地址}
+    \o \l{tutorials/addressbook/part5}{添加查找功能}
+    \o \l{tutorials/addressbook/part6}{加载和保存}
+    \o \l{tutorials/addressbook/part7}{附加功能}
+    \endlist
+
+    虽然这个小型应用程序看起来并不象一个成熟的现代 GUI 应用程序，但它使用多种用于更复杂应用程序的基本技术。在您完成学习之后，我们建议您查看一下\l{mainwindows/application}{应用程序}示例，它提供带有菜单、工具栏、状态栏等项目的小型 GUI 应用程序。
+*/
+
+/*!
+    \page tutorials-addressbook-part1.html
+    \contentspage {地址簿教程}{目录}
+    \nextpage {tutorials/addressbook/part2}{第二章}
+    \example tutorials/addressbook/part1
+    \title 地址簿 1 — 设计用户界面
+
+    本教程的第一部分讲述了用于地址簿应用程序的基本图形用户界面 (GUI) 的设计。
+
+    创建 GUI 程序的第一步就是设计用户界面。在本章中，我们的目标是设置应用基本地址簿应用程序所需的标签和输入字段。下图为期望输出的屏幕截图。
+
+    \image addressbook-tutorial-part1-screenshot.png
+
+    我们需要使用两个 QLabel 对象：\c nameLabel 和 \c addressLabel，以及两个输入字段：QLineEdit 对象 \c nameLine 和 QTextEdit
+    对象 \c addressText，这样用户才能输入联系人的姓名和地址。使用的 widget 及其位置如下图所示。
+
+    \image addressbook-tutorial-part1-labeled-screenshot.png
+
+    要应用地址簿需使用三个文件：
+
+    \list
+        \o \c{addressbook.h} — AddressBook 类的定义文件，
+        \o \c{addressbook.cpp} — AddressBook 类的执行文件，以及
+        \o \c{main.cpp} — 包含 \c main() 函数并带有 AddressBook 实例的文件。
+    \endlist
+
+    \section1 Qt 编程 — 使用子类
+
+    在编写 Qt 程序时，我们通常使用 Qt 对象子类来添加功能。这是创建定制 widget 或标准 widget 集合的基本概念之一。使用子类扩展或改变 widget 的操作具有以下优势：
+
+    \list
+    \o 我们可以编写虚函数或纯虚函数应用，以得到我们确切所需的功能，并在需要时再使用基本的类应用。
+    \o 这样我们就可以在类中封装部分用户界面，应用程序的其他部分也就无需了解用户界面中单独使用的 widget。
+    \o 可使用子类在同一应用程序或库中创建多个定制 widget，这样子类的代码可在其他项目重复使用。
+    \endlist
+
+    由于 Qt 未提供特定的地址簿 widget，我们在标准的 Qt widget 类中使用子类，然后添加功能。我们在本教程中创建的 \c AddressBook 类在需要使用基本地址簿 widget 的情况下可重复使用。
+
+    \section1 定义 AddressBook 类
+
+    \l{tutorials/addressbook/part1/addressbook.h}{\c addressbook.h} 文件用于定义 \c AddressBook  类。
+
+    我们从定义 \c AddressBook 为 QWidget 子类和声明构造器开始入手。我们还使用 Q_OBJECT 宏表明该类使用国际化功能与 Qt 信号和槽功能，即使在本阶段不会用到所有这些功能。
+
+    \snippet tutorials/addressbook/part1/addressbook.h class definition
+
+    该类包含了 \c nameLine 和 \c addressText 的声明、上文提到的 QLineEdit 和 QTextEdit 的私有实例。在以后章节中，您会看到储存在 \c nameLine 和 \c addressText 中的数据在地址簿的许多功能中都会用到。
+
+    我们不必包含要使用的 QLabel 对象的声明，这是因为在创建这些对象后我们不必对其进行引用。在下一部分中，我们会说明 Qt 记录对象所属关系的方式。
+
+    Q_OBJECT 宏本身应用了部分更高级的 Qt 功能。 我们暂时把 Q_OBJECT 宏理解为使用 \l{QObject::}{tr()} 和 \l{QObject::}{connect()} 函数的快捷方式，这种理解对我们的学习更有用。
+
+    我们现已完成 \c addressbook.h 文件，接下来我们来执行对应的 \c addressbook.cpp 文件。
+
+    \section1 应用 AddressBook 类
+
+    \c AddressBook 的构造器接收 QWidget 参数 \a parent。按惯例，我们将参数传递给基本类的构造器。这种父项可有一个或多个子项的所属概念对 Qt 中的 widget 分组十分有用。例如，如果删除父项，也会删除其所有子项。
+
+    \snippet tutorials/addressbook/part1/addressbook.cpp constructor and input fields
+
+    在该构造器中，我们声明并通过实例来表示两个局部 QLabel 对象 \c nameLabel 和 \c addressLabel，以及 \c nameLine 和 \c addressText。如果字符串已进行转换，则 \l{QObject::tr()}{tr()} 函数返回已转换的字符串，否则返回字符串本身。我们可以将此函数理解 \c{<insert translation here>} 标识来标记要进行转换 QString 对象。在以后章节和 \l{Qt Examples} 中，您会看到只要使用了可转换的字符串就是使用该函数。
+
+    使用 Qt 编程时，了解布局是如何起作用的会对您很有帮助。Qt 提供三个主要布局类 QHBoxLayout、QVBoxLayout 和 QGridLayout 来处理 widget 的位置。
+
+    \image addressbook-tutorial-part1-labeled-layout.png
+
+    我们使用 QGridLayout 以结构化的方式放置标签和输入字段。QGridLayout 将可用空间分为网格，并将 widget 放置在指定了行列号的单元格中。上面的图表显示了布局单元格和 widget 的位置。我们通过以下代码指定这种排列方式：
+
+    \snippet tutorials/addressbook/part1/addressbook.cpp layout
+
+    请注意，\c addressLabel 是使用作为附加参数的 Qt::AlignTop 来排放位置。这可确保其不会纵向放置在单元格 (1,0) 中央。有关 Qt 布局的基本简介，请参见\l{Layout Management}{布局类}文档。
+
+    要在 widget 上安装布局对象，必须调用 widget 的 \l{QWidget::setLayout()}{setLayout()} 函数：
+
+    \snippet tutorials/addressbook/part1/addressbook.cpp setting the layout
+
+    最后，我们将 widget 标题设置为“简单地址簿”。
+
+    \section1 运行应用程序
+
+    \c main() 函数使用单独的文件 \c main.cpp。在该函数中，我们实例化了 QApplication 对象 \c app。QApplication 负责管理多种应用范围的资源（如默认字体和光标），以及运行事件循环。因此，在每个使用 Qt 的 GUI 应用程序中都会有一个 QApplication 对象。
+
+    \snippet tutorials/addressbook/part1/main.cpp main function
+
+    我们使用 new 关键字在堆中构造一个新的 \c AddressBook widget，然后调用 \l{QWidget::show()}{show()} 函数对其进行显示。不过，该 widget 只有在应用程序事件循环开始时才会显示。我们通过调用应用程序的 \l{QApplication::}{exec()} 函数开始事件循环。该函数返回的结果作为 \c main()  函数的返回值。
+*/
+
+/*!
+    \page tutorials-addressbook-part2.html
+    \previouspage 地址簿 1 — 设计用户界面
+    \contentspage {地址簿教程}{目录}
+    \nextpage {tutorials/addressbook/part3}{第三章}
+    \example tutorials/addressbook/part2
+    \title 地址簿 2 — 添加地址
+
+    创建基本地址簿应用程序的下一步是添加少许用户互动操作。
+
+    \image addressbook-tutorial-part2-add-contact.png
+
+    我们将提供一个按钮，用户可点击该按钮来添加新联系人。此外，还需要对数据结构进行限定，以便有序地储存这些联系人。
+
+    \section1 定义 AddressBook 类
+
+    由于已经设置了标签和输入字段，我们只需添加按钮就可完成添加联系人这一步骤。也就是说，在 \c addressbook.h 文件中已经声明了三个 QPushButton 对象和三个对应的公共槽。
+
+    \snippet tutorials/addressbook/part2/addressbook.h slots
+
+    槽是对特殊信号进行响应的函数。我们将在应用 \c AddressBook  类时进一步详细说明这一概念。如需有关 Qt 信号和槽概念的简介，请参见\l{Signals and Slots}{信号和槽}文档。
+
+    三个 QPushButton 对象分别是 \c addButton、\c submitButton 和 \c cancelButton，已与要在上一章中说明的 \c nameLine 和 \c addressText 一同包含在私有变量声明中。
+
+    \snippet tutorials/addressbook/part2/addressbook.h pushbutton declaration
+
+    我们需要一个容器来储存地址簿联系人，这样才能搜索和显示联系人。QMap 对象 \c contacts 就可实现此功能，因为其带有一个键-值对：联系人姓名作为键，而联系人地址作为\e{值}。
+
+    \snippet tutorials/addressbook/part2/addressbook.h remaining private variables
+
+    我们还会声明两个私有 QString 对象：\c oldName 和 \c oldAddress。这些对象用来保留在用户点击\gui{添加}时最后显示的联系人姓名和地址。这样，当用户点击\gui{取消}时，我们就可以返回至上一个联系人的详细信息。
+
+    \section1 应用 AddressBook 类
+
+    在 \c AddressBook 构造器中，我们将 \c nameLine 和 \c addressText 设置为只读，这样就可仅显示而不必编辑现有联系人的详细信息。
+
+    \dots
+    \snippet tutorials/addressbook/part2/addressbook.cpp setting readonly 1
+    \dots
+    \snippet tutorials/addressbook/part2/addressbook.cpp setting readonly 2
+
+    然后，我们实例化以下按钮：\c addButton、\c submitButton 和 \c cancelButton。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp pushbutton declaration
+
+    显示 \c addButton 是通过调用 \l{QPushButton::show()}{show()} 函数实现的，而隐藏 \c submitButton 和 \c cancelButton 则需调用 \l{QPushButton::hide()}{hide()}。这两个按钮仅当用户点击\gui{添加}时才会显示，而此操作是通过在下文中说明的\c addContact() 函数处理的。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp connecting signals and slots
+
+    我们将按钮的 \l{QPushButton::clicked()}{clicked()} 信号与其相应的槽关联。下面的图表说明了此过程。
+
+    \image addressbook-tutorial-part2-signals-and-slots.png
+
+    接下来，我们将按钮整齐的排列在地址簿 widget 的右侧，使用 QVBoxLayout 将其进行纵向排列。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp vertical layout
+
+    \l{QBoxLayout::addStretch()}{addStretch()} 函数用来确保按钮并不是采用均匀间隔排列的，而是更靠近 widget 的顶部。下图显示了是否使用 \l{QBoxLayout::addStretch()}{addStretch()} 的差别。
+
+    \image addressbook-tutorial-part2-stretch-effects.png
+
+    然后，我们使用 \l{QGridLayout::addLayout()}{addLayout()} 将 \c buttonLayout1 增加至 \c mainLayout。 这样我们就有了嵌套布局，因为 \c buttonLayout1 现在是 \c mainLayout 的子项。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp grid layout
+
+    布局坐标显示如下：
+
+    \image addressbook-tutorial-part2-labeled-layout.png
+
+    在 \c addContact() 函数中，我们使用 \c oldName 和 \c oldAddress 储存最后显示的联系人详细信息。然后，我们清空这些输入字段并关闭只读模式。输入焦点设置在 \c nameLine，显示 \c submitButton 和 \c cancelButton。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp addContact
+
+    \c submitContact() 函数可分为三个部分：
+
+    \list 1
+    \o 我们从 \c nameLine 和 \c addressText 提取联系人的详细信息，然后将其储存在 QString 对象中。我们还要验证确保用户没有在输入字段为空时点击\gui{提交}，否则，会显示 QMessageBox 提示用户输入姓名和地址。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp submitContact part1
+
+    \o 我们接着继续检查是否联系人已存在。如果不存在，将联系人添加至 \c contacts，然后显示 QMessageBox 提示用户已添加联系人。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp submitContact part2
+
+    如果联系人已存在，还是会显示 QMessageBox 以提示用户，以免添加重复的联系人。由于 \c contacts 对象是基于姓名地址的键-值对，因此要确保键唯一。
+
+    \o 在处理了上述两种情况后，使用以下代码将按钮恢复为正常状态：
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp submitContact part3
+
+    \endlist
+
+    下面的屏幕截图显示了用于向用户显示提示信息的 QMessageBox 对象。
+
+    \image addressbook-tutorial-part2-add-successful.png
+
+    \c cancel() 函数恢复上次显示的联系人详细信息，并启用 \c addButton，还会隐藏 \c submitButton 和
+    \c cancelButton。
+
+    \snippet tutorials/addressbook/part2/addressbook.cpp cancel
+
+    添加联系人的总体思想就是提高用户操作的灵活性，可在任何时候点击\gui{提交}或\gui{取消}。下面的流程图详细说明了此概念：
+
+    \image addressbook-tutorial-part2-add-flowchart.png
+*/
+
+/*!
+    \page tutorials-addressbook-part3.html
+    \previouspage 地址簿 2 — 添加地址
+    \contentspage {地址簿教程}{目录}
+    \nextpage {tutorials/addressbook/part4}{第四章}
+    \example tutorials/addressbook/part3
+    \title 地址簿 3 — 浏览地址簿条目
+
+    构建地址簿应用程序现已进展过半。我们需要增加一些函数，以便浏览联系人。但首先要决定采用何种数据结构方式来储存这些联系人。
+
+    在第二章中，我们使用了 QMap 键-值对，即联系人姓名作为\e{键}，而联系人地址作为\e{值}。这种方式很适合我们的实例。不过，要浏览和显示每个条目，还需要进行一些改进。
+
+    我们改进 QMap 的方式是，将数据结构替换为类似循环链接的列表，其中所有元素都是相互关联的，包括第一个元素和最后一个元素。下图图解说明了该数据结构。
+
+    \image addressbook-tutorial-part3-linkedlist.png
+
+    \section1 定义 AddressBook 类
+
+    要给地址簿应用程序增加浏览功能，我们需要为 \c AddressBook 类再增加两个函数：\c next() 和 \c previous()。将这两个函数添加到 \c addressbook.h 文件中：
+
+    \snippet tutorials/addressbook/part3/addressbook.h navigation functions
+
+    我们还需要使用其他两个 QPushButton 对象，因此将 \c nextButton 和 \c previousButton 声明为私有变量：
+
+    \snippet tutorials/addressbook/part3/addressbook.h navigation pushbuttons
+
+    \section1 应用 AddressBook 类
+
+    在 \c AddressBook 的 \c addressbook.cpp 构造器中，我们实例化 \c nextButton 和 \c previousButton，并且这两项默认为禁用。这是因为仅当地址簿中有多个联系人时才会启用浏览功能。
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp navigation pushbuttons
+
+    然后，我们将这两个按钮与其相应的槽关联：
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp connecting navigation signals
+
+    下图即为预期的图形用户界面。请注意，该用户界面已很接近应用程序最终的样子。
+
+    \image addressbook-tutorial-part3-screenshot.png
+
+    我们按照 \c next() 和 \c previous() 函数的基本规范，将 \c nextButton 放置在右侧，而 \c previousButton 放置在左侧。为了使布局更加直观，我们使用 QHBoxLayout 将 widget 并排放置：
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp navigation layout
+
+    然后，将 QHBoxLayout 对象 \c buttonLayout2 增加至 \c mainLayout。
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp adding navigation layout
+
+    下图显示了 widget 在 \c mainLayout 中的坐标位置。
+
+    \image addressbook-tutorial-part3-labeled-layout.png
+
+    在 \c addContact() 函数中，我们必须禁用这几个按钮，这样用户就不会在增加联系人时尝试进行浏览。
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp disabling navigation
+
+    此外，在 \c submitContact() 函数中，我们启用了浏览按钮 \c nextButton 和 \c previousButton，这取决于 \c contacts 的多少。如上文所述，浏览功能仅在地址簿中有多个联系人时才会启用。以下代码行说明了如何实现此功能：
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp enabling navigation
+
+    我们还在 \c cancel() 函数中加入这几行代码。
+
+    记得我们曾使用 QMap 对象 \c contacts 模拟了一个循环链接的列表。因此，在 \c next() 函数中，我们获取 \c contacts 的迭代器，然后执行以下操作：
+
+    \list
+        \o 如果迭代器未达到 \c contacts 结尾，就会增加一。
+        \o 如果迭代器已达到 \c contacts 的结尾，就移至 \c contacts 的起始位置。这给人感觉 QMap 就像是一个循环链接的列表。
+    \endlist
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp next() function
+
+    一旦在 \c contacts 中循环至正确的对象，就会通过 \c nameLine 和 \c addressText 显示对象的内容。
+
+    同样，在 \c previous() 函数中，我们获取 \c contacts 的迭代器，然后执行以下操作：
+
+    \list
+        \o 如果迭代器达到 \c contacts 的结尾，就清除显示内容，然后返回。
+        \o 如果迭代器在 \c contacts 的起始位置，就将其移至结尾。
+        \o 然后，将迭代器减一。
+    \endlist
+
+    \snippet tutorials/addressbook/part3/addressbook.cpp previous() function
+
+    接着，重新显示 \c contacts 中当前对象的内容。
+*/
+
+/*!
+    \page tutorials-addressbook-part4.html
+    \previouspage 地址簿 3 — 浏览地址簿条目
+    \contentspage {地址簿教程}{目录}
+    \nextpage {tutorials/addressbook/part5}{第五章}
+    \example tutorials/addressbook/part4
+    \title 地址簿 4 — 编辑和删除地址
+
+    在本章中，我们将了解如何修改储存在地址簿应用程序中的联系人的内容。
+
+    \image addressbook-tutorial-screenshot.png
+
+    现有的地址簿不仅可以井井有条地储存联系人，还可进行浏览。再添加上编辑和删除功能，以便在需要时更改联系人的详细信息，这样更易于使用。不过，还需使用 enum 类型进行一些改进。在前几章中，我们使用以下两种模式：\c{AddingMode} 和 \c{NavigationMode}。但是，他们并未定义为 enum。我们是采用手动方式启用和禁用相应的按钮，这就导致有多行重复的代码。
+
+    在本章中，我们定义带有以下三种不同值的 \c{Mode} enum 类型：
+
+    \list
+        \o \c{NavigationMode}、
+        \o \c{AddingMode} 和
+        \o \c{EditingMode}。
+    \endlist
+
+    \section1 定义 AddressBook 类
+
+    \c addressbook.h 文件已更新为包含 Mode \c enum 类型：
+
+    \snippet tutorials/addressbook/part4/addressbook.h Mode enum
+
+    我们还要向当前的公有槽列表增加两个新槽：\c editContact() 和 \c removeContact()。
+
+    \snippet tutorials/addressbook/part4/addressbook.h edit and remove slots
+
+    为了在模式间切换，我们引入了 \c updateInterface() 函数来控制所有 QPushButton 对象的启用和禁用。要实现上文提及的编辑和删除功能，我们还要增加两个新按钮：\c editButton 和 \c removeButton。
+
+    \snippet tutorials/addressbook/part4/addressbook.h updateInterface() declaration
+    \dots
+    \snippet tutorials/addressbook/part4/addressbook.h buttons declaration
+    \dots
+    \snippet tutorials/addressbook/part4/addressbook.h mode declaration
+
+    最后，我们声明 \c currentMode 来跟踪 enum 的当前模式。
+
+    \section1 应用 AddressBook 类
+
+    我们现在必须应用地址簿应用程序的模式更改功能。\c editButton 和 \c removeButton 已实例化并默认为禁用，这是因为地址簿启动时在内存中没有联系人。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp edit and remove buttons
+
+    这些按钮会与其相应的槽 \c editContact() 和 \c removeContact() 关联，然后我们将其添加至 \c buttonLayout1。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp connecting edit and remove
+    \dots
+    \snippet tutorials/addressbook/part4/addressbook.cpp adding edit and remove to the layout
+
+    在将模式切换到 \c EditingMode 之前，\c editContact() 函数使用 \c oldName 和 \c oldAddress 储存联系人旧的详细信息。 在该模式下，\c submitButton 和 \c cancelButton 均已启用，这样用户就可以更改联系人的详细信息并可点击任何一个按钮。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp editContact() function
+
+    \c submitContact() 函数已被 \c{if-else} 语句分为两部分。我们查看 \c currentMode 是否在 \c AddingMode 模式下。如果是，我们继续添加操作。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp submitContact() function beginning
+    \dots
+    \snippet tutorials/addressbook/part4/addressbook.cpp submitContact() function part1
+
+    否则，我们查看 \c currentMode 是否在 \c EditingMode 模式下。如果是，我们比较 \c oldName 和 \c name。如果姓名已更改，我们从 \c contacts 中删除旧的联系人并插入已更新的联系人。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp submitContact() function part2
+
+    如果仅更改了地址（例如 \c oldAddress 与 \c address 不同），我们就更新联系人的地址。最后，我们将 \c currentMode 设置为 \c NavigationMode。这一步至关重要，因为它会重新启用所有已禁用的按钮。
+
+    要从地址簿中删除联系人，我们采用 \c removeContact() 函数。该函数查看 \c contacts 中是否包含该联系人。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp removeContact() function
+
+    如果有，我们显示 QMessageBox，确认用户的删除操作。一旦用户确认操作，我们调用 \c previous() 确保用户界面显示其他联系人，然后我们使用 QMap 的 \l{QMap::remove()}{remove()} 函数删除已已确认的联系人。出于好意，我们会显示 QMessageBox 提示用户。在该函数中使用两种信息框显示如下：
+
+    \image addressbook-tutorial-part4-remove.png
+
+    \section2 更新用户界面
+
+    我们在上文提到 \c updateInterface() 函数，它可根据当前的模式启用和禁用按钮。该函数会根据传递给它的 \c mode 参数更新当前的模式，在校验值之前将参数分配给 \c currentMode。
+
+    这样，每个按钮就根据当前的模式进行启用或禁用。\c AddingMode 和 \c EditingMode 的代码显示如下：
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp update interface() part 1
+
+    不过对于 \c NavigationMode，我们在 QPushButton::setEnabled() 函数的参数中加入了条件。这样可确保 \c editButton 和 \c removeButton 在地址簿中至少有一个联系人的情况下启用，而 \c nextButton 和 \c previousButton 仅在地址簿中有多个联系人时才启用。
+
+    \snippet tutorials/addressbook/part4/addressbook.cpp update interface() part 2
+
+    通过在同一函数中设置模式和更新用户界面，我们可以避免用户界面与应用程序内部状态不同步的可能性。
+*/
+
+/*!
+    \page tutorials-addressbook-part5.html
+    \previouspage 地址簿 4 — 编辑和删除地址
+    \contentspage {地址簿教程}{目录}
+    \nextpage {tutorials/addressbook/part6}{第六章}
+    \example tutorials/addressbook/part5
+    \title 地址簿 5 — 添加查找功能
+
+    在本章中，我们将了解如何在地址簿应用程序中定位联系人和地址。
+
+    \image addressbook-tutorial-part5-screenshot.png
+
+    随着我们不断为地址簿应用程序添加联系人，使用下一个和上一个按钮浏览联系人就会变得很繁琐。在这种情况下，使用查找函数查找联系人就会更加有效。上面的屏幕截图显示了查找按钮及其在按钮面板上的位置。
+
+    当用户点击查找按钮时，有必要显示一个对话框，用户可在其中输入联系人的姓名。Qt 提供了 QDialog（我们会在本章中将其用作子类），可使用 \c FindDialog 类。
+
+    \section1 定义 FindDialog 类
+
+    \image addressbook-tutorial-part5-finddialog.png
+
+    要使用 QDialog 的子类，我们首先要在 \c finddialog.h 文件中声明 QDialog 的头信息。此外，我们还使用向前 (forward) 声明来声明 QLineEdit 和 QPushButton，这样我们就能在对话框类中使用这些 widget。
+
+    因为在 \c AddressBook 类中，\c FindDialog 类包含了 Q_OBJECT 宏，并且其构造器已定义为接收父级 QWidget，即使对话框以单独的窗口方式打开。
+
+    \snippet tutorials/addressbook/part5/finddialog.h FindDialog header
+
+    我们定义了公有函数 \c getFindText()，供实例化 \c FindDialog 的类使用，这样这些类可以获取用户输入的文本。公有槽 \c findClicked() 定义为在用户点击\gui{查找}按钮时处理搜索字符串。
+
+    最后，我们定义私有变量 \c findButton、\c lineEdit 和 \c findText，分别对应\gui{查找}按钮、用户输入搜索字符串的行编辑框和储存搜索字符串供稍后使用的内部字符串。
+
+    \section1 应用 FindDialog 类
+
+    在 \c FindDialog 的构造器中，我们设置私有变量 \c lineEdit、\c findButton 和 \c findText。使用 QHBoxLayout 放置 widget。
+
+    \snippet tutorials/addressbook/part5/finddialog.cpp constructor
+
+    我们设定布局和窗口标题，并将信号与其各自的槽关联。请注意，\c findButton 的 \l{QPushButton::clicked()}{clicked()} 信号已与 \c findClicked() 和 \l{QDialog::accept()}{accept()} 关联。QDialog 提供的 \l{QDialog::accept()}{accept()} 槽会隐藏对话框并将结果代码设置为 \l{QDialog::}{Accepted}。我们使用该函数有助于 \c AddressBook 的 \c findContact() 函数知晓 \c FindDialog 对象关闭的时间。我们在讨论 \c findContact() 函数时将对该函数做进一步说明。
+
+    \image addressbook-tutorial-part5-signals-and-slots.png
+
+    在 \c findClicked() 中，我们验证 \c lineEdit 以确保用户没有在尚未输入联系人姓名时就点击\gui{查找}按钮。然后，我们将 \c findText 设置为从 \c lineEdit 提取的搜索字符串。之后，我们清空 \c lineEdit 的内容并隐藏对话框。
+
+    \snippet tutorials/addressbook/part5/finddialog.cpp findClicked() function
+
+    \c findText 变量已有公有 getter 函数 \c getFindText() 与其相关联。既然我们仅在构造器和 \c findClicked() 函数中直接设定了 \c findText， 我们就不在创建 \c getFindText() 的同时再创建 setter 函数。由于 \c getFindText() 是公有的，实例化和使用 \c FindDialog 的类可始终读取用户已输入并确认的搜索字符串。
+
+    \snippet tutorials/addressbook/part5/finddialog.cpp getFindText() function
+
+    \section1 定义 AddressBook 类
+
+    要确保我们可使用 \c AddressBook 类中的 \c FindDialog，我们要在 \c addressbook.h 文件中包含 \c finddialog.h。
+
+    \snippet tutorials/addressbook/part5/addressbook.h include finddialog's header
+
+    至此，所有地址簿功能都有了 QPushButton 和对应的槽。同样，\gui{Find} 功能有 \c findButton 和 \c findContact()。
+
+    \c findButton 声明为私有变量，而 \c findContact() 函数声明为公有槽。
+
+    \snippet tutorials/addressbook/part5/addressbook.h findContact() declaration
+    \dots
+    \snippet tutorials/addressbook/part5/addressbook.h findButton declaration
+
+    最后，我们声明私有变量 \c dialog，用于引用 \c FindDialog 的实例。
+
+    \snippet tutorials/addressbook/part5/addressbook.h FindDialog declaration
+
+    在实例化对话框后，我们可能会对其进行多次使用。使用私有变量可在类中不同位置对其进行多次引用。
+
+    \section1 应用 AddressBook 类
+
+    在 \c AddressBook 类的构造器中，实例化私有对象 \c findButton 和 \c findDialog：
+
+    \snippet tutorials/addressbook/part5/addressbook.cpp instantiating findButton
+    \dots
+    \snippet tutorials/addressbook/part5/addressbook.cpp instantiating FindDialog
+
+    接下来，将 \c findButton 的 \l{QPushButton::clicked()}{clicked()} 信号与 \c findContact() 关联。
+
+    \snippet tutorials/addressbook/part5/addressbook.cpp signals and slots for find
+
+    现在唯一要完成的就是 \c findContact() 函数的编码：
+
+    \snippet tutorials/addressbook/part5/addressbook.cpp findContact() function
+
+    我们从显示 \c FindDialog 的实例 \c dialog 开始入手。这时用户开始输入联系人姓名进行查找。用户点击对话框的 \c findButton 后，对话框会隐藏，并且结果代码设置为 QDialog::Accepted.这样就确保了 \c if 语句始终为真。
+
+    然后，我们就开始使用 \c FindDialog 的 \c getFindText() 函数提取搜索字符串，这个字符串也就是本例中的 \c contactName。如果地址簿中有联系人，就立即显示该联系人。否则，显示如下所示的 QMessageBox 表明搜索失败。
+
+    \image addressbook-tutorial-part5-notfound.png
+*/
+
+/*!
+    \page tutorials-addressbook-part6.html
+    \previouspage 地址簿 5 — 添加查找功能
+    \contentspage {地址簿教程}{目录}
+    \nextpage {tutorials/addressbook/part7}{第七章}
+    \example tutorials/addressbook/part6
+    \title 地址簿 6 — 加载和保存
+
+    本章描述了用于编写地址簿应用程序的加载和保存程序所使用的 Qt 文件处理功能。
+
+    \image addressbook-tutorial-part6-screenshot.png
+
+    虽然浏览和搜索联系人是非常实用的功能，但只有在可以保存现有联系人并可以在以后加载的前提下地址簿才真正完全可用。Qt 提供大量用于\l{Input/Output and Networking}{输入和输出}的类，但我们只选择两个易于合并使用的类：QFile 和 QDataStream。
+
+    QFile 对象表示磁盘上可读取和写入的文件。QFile 是代表多种不同设备且应用更广的 QIODevice 类的子类。
+
+    QDataStream 对象用于按顺序排列二进制数据，以便储存在 QIODevice 中并供以后检索。读取或写入 QIODevice 就如同打开数据流，然后读取或写入一样简单，只是参数为不同的设备。
+
+
+    \section1 定义 AddressBook 类
+
+    我们声明两个公有槽 \c saveToFile() 和 \c loadFromFile()，以及两个 QPushButton 对象 \c loadButton 和 \c saveButton。
+
+    \snippet tutorials/addressbook/part6/addressbook.h save and load functions declaration
+    \dots
+    \snippet tutorials/addressbook/part6/addressbook.h save and load buttons declaration
+
+    \section1 应用 AddressBook 类
+
+    在构造器中，我们实例化 \c loadButton 和 \c saveButton。理想情况下，将按钮标签设置为“从文件加载联系人”和“将联系人保存至文件”会更方便用户使用。不过，由于其他按钮的大小限制，我们将标签设置为\gui{加载...}和\gui{保存...}。幸运的是，Qt 提供了使用 \l{QWidget::setToolTip()}{setToolTip()} 来设置工具提示的简单方式，我们可通过如下方式将其用于按钮：
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp tooltip 1
+    \dots
+    \snippet tutorials/addressbook/part6/addressbook.cpp tooltip 2
+
+    虽然此处没有显示，但与其他应用的功能一样，我们在右侧的布局面板 \c button1Layout 上添加按钮，然后将按钮的 \l{QPushButton::clicked()}{clicked()} 信号与其相应的槽关联。
+
+    至于保存功能，我们首先使用 QFileDialog::getSaveFileName() 获取 \c fileName。 这是 QFileDialog 提供的一个便捷功能，可弹出样式文件对话框并允许用户输入文件名或选择现有的 \c{.abk} 文件。\c{.abk} 文件是保存联系人时创建的地址簿扩展名。
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp saveToFile() function part1
+
+    弹出的文件对话框屏幕截图显示如下：
+
+    \image addressbook-tutorial-part6-save.png
+
+    如果 \c fileName 不为空，我们就使用 \c fileName 创建 QFile 对象 \c file。 QFile 与 QDataStream 一同使用，这是因为QFile 是 QIODevice。
+
+    接下来，我们尝试以 \l{QIODevice::}{WriteOnly} 模式打开文件。如果未能打开，会显示 QMessageBox 提示用户。
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp saveToFile() function part2
+
+    否则，会用实例表示 QDataStream 对象 \c out，以写入打开的文件。QDataStream 要求读写操作需使用相同版本的数据流。在将数据按顺序写入 \c file 之前，将使用的版本设置为\l{QDataStream::Qt_4_5}{采用 Qt 4.5 的版本}就可确保版本相同。
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp saveToFile() function part3
+
+    至于加载功能，我们也是使用 QFileDialog::getOpenFileName() 获取 \c fileName。该函数与 QFileDialog::getSaveFileName() 相对应，也是弹出样式文件对话框并允许用户输入文件名或选择现有的 \c{.abk} 文件加载到地址簿中。
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp loadFromFile() function part1
+
+    例如，在 Windows 上，该函数弹出本地文件对话框，如以下屏幕截图所示。
+
+    \image addressbook-tutorial-part6-load.png
+
+    如果 \c fileName 不为空，还是使用 QFile 对象 \c file，然后尝试在 \l{QIODevice::}{ReadOnly} 模式下打开文件。与 \c saveToFile() 的应用方式类似，如果尝试失败，会显示 QMessageBox 提示用户。
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp loadFromFile() function part2
+
+    否则，会用实例表示 QDataStream 对象 \c in，按上文所述设置其版本，然后将按顺序排列的数据读入 \c contacts 数据结构。请注意，在将数据读入之前清空 \c contacts 可简化文件读取过程。更高级的方法是将联系人读取至临时 QMap 对象，然后仅复制 \c contacts 中不存在的联系人。
+
+    \snippet tutorials/addressbook/part6/addressbook.cpp loadFromFile() function part3
+
+    要显示从文件中读取的联系人，必须要先验证获取的数据，以确保读取的文件实际包含地址簿联系人。如果为真，显示第一个联系人，否则显示 QMessageBox 提示出现问题。最后，我们更新界面以相应地启用和禁用按钮。
+*/
+
+/*!
+    \page tutorials-addressbook-part7.html
+    \previouspage 地址簿 6 — 加载和保存
+    \contentspage {地址簿教程}{目录}
+    \example tutorials/addressbook/part7
+    \title 地址簿 7 — 附加功能
+
+    本章讲述了部分可使地址簿应用程序日常使用更加便捷的附加功能。
+
+    \image addressbook-tutorial-part7-screenshot.png
+
+    虽然地址簿应用程序其自身功能已经很实用，但是如果可和其他应用程序互换联系人数据就会更加有益。vCard 格式是一种流行的文件格式，就可用于此目的。在本章中，我们会扩展地址簿客户端，可将联系人导出到 vCard \c{.vcf} 文件中。
+
+    \section1 定义 AddressBook 类
+
+    我们在 \c addressbook.h 文件的 \c AddressBook 类中添加 QPushButton 对象 \c exportButton 以及对应的公有槽 \c exportAsVCard()。
+
+    \snippet tutorials/addressbook/part7/addressbook.h exportAsVCard() declaration
+    \dots
+    \snippet tutorials/addressbook/part7/addressbook.h exportButton declaration
+
+    \section1 应用 AddressBook 类
+
+    在 \c AddressBook 构造器中，我们将 \c exportButton 的 \l{QPushButton::clicked()}{clicked()} 信号连接至 \c exportAsVCard()。我们还会将该按钮添加至 \c buttonLayout1，它是负责右侧按钮面板的布局类。
+
+    在 \c exportAsVCard() 函数中，我们从提取 \c name 中联系人姓名开始入手。我们声明 \c firstName、\c lastName 和 \c nameList。接下来，我们查找 \c name 中第一处空白的索引。如果有空白，就将联系人的姓名分隔为 \c firstName 和 lastName。然后，将空白替换为下划线 ("_")。或者，如果没有空白，就认定联系人只有名字。
+
+    \snippet tutorials/addressbook/part7/addressbook.cpp export function part1
+
+    至于 \c saveToFile() 函数，会打开文件对话框，让用户选择文件的位置。通过选择的文件名称，我们创建要写入的 QFile 实例。
+
+    我们尝试以 \l{QIODevice::}{WriteOnly} 模式打开文件。如果操作失败，会显示 QMessageBox 提示用户出现问题并返回。否则，将文件作为参数传递给 QTextStream 对象 \c out。与 QDataStream 类似，QTextStream 类提供了读取纯文本和将其写入到文件的功能。因此，所生成的 \c{.vcf} 文件可以在文本编辑器中打开进行编辑。
+
+    \snippet tutorials/addressbook/part7/addressbook.cpp export function part2
+
+    然后，我们写出依次带有 \c{BEGIN:VCARD} 和 \c{VERSION:2.1} 标记的 vCard 文件。联系人的姓名使用 \c{N:} 标记写入。至于写入 vCard “File as”属性的 FN: 标记，我们必须要查看是否联系人带有姓。如果联系人有姓，就使用 \c nameList 中的详细信息填入该标记。否则，仅写入 \c firstName。
+
+    \snippet tutorials/addressbook/part7/addressbook.cpp export function part3
+
+    我们继续写入联系人的地址。地址中的分号使用 "\\" 进行转义，新行使用分号进行替换，而逗号使用空白进行替换。最后，我们依次写入 \c{ADR;HOME:;}、\c address 和 \c{END:VCARD} 标记。
+
+    \snippet tutorials/addressbook/part7/addressbook.cpp export function part4
+
+    最后，会显示 QMessageBox 提示用户已成功导出 vCard。
+
+    \e{vCard 是 \l{http://www.imc.org}{Internet Mail Consortium} 的商标}。
+*/
diff --git a/doc/src/zh_CN/tutorials/widgets-tutorial.qdoc b/doc/src/zh_CN/tutorials/widgets-tutorial.qdoc
new file mode 100644
index 0000000..90ef4f3
--- /dev/null
+++ b/doc/src/zh_CN/tutorials/widgets-tutorial.qdoc
@@ -0,0 +1,244 @@
+/****************************************************************************
+**
+** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).
+** All rights reserved.
+** Contact: Nokia Corporation (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the Technology Preview License Agreement accompanying
+** this package.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain additional
+** rights.  These rights are described in the Nokia Qt LGPL Exception
+** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.
+**
+** If you have questions regarding the use of this file, please contact
+** Nokia at qt-info@nokia.com.
+**
+**
+**
+**
+**
+**
+**
+**
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \page widgets-tutorial.html
+    \title Widgets 教程
+    \brief This tutorial covers basic usage of widgets and layouts, showing how
+    they are used to build GUI applications.
+
+    \startpage {index.html}{Qt Reference Documentation}
+    \contentspage 教程
+    \nextpage {Widgets 教程 — 创建窗口}
+
+
+    \section1 简介
+
+    Widget 是使用 Qt 编写的图形用户界面 (GUI) 应用程序的基本生成块。每个 GUI 组件，如按钮、标签或文本编辑器，都是一个 widget ，并可以放置在现有的用户界面中或作为单独的窗口显示。每种类型的组件都是由 QWidget 的特殊子类提供的，而 QWidget 自身又是 QObject 的子类。
+
+    QWidget 不是一个抽象类；它可用作其他 widget 的容器，并很容易作为子类使用来创建定制 widget。它经常用来创建放置其他 widget 的窗口。
+
+    至于 QObject，可使用父对象创建 widget 以表明其所属关系，这可确保删除不再使用的对象。使用 widget，这些父子关系就有了更多的意义：每个子类都显示在其父级所拥有的屏幕区域内。也就是说，当删除窗口时，其包含的所有 widget 也都自动删除。
+
+    \section1 Writing a main Function
+
+    Many of the GUI examples in Qt follow the pattern of having a \c{main.cpp}
+    file containing code to initialize the application, and a number of other
+    source and header files containing the application logic and custom GUI
+    components.
+
+    A typical \c main() function, written in \c{main.cpp}, looks like this:
+
+    \snippet doc/src/snippets/widgets-tutorial/template.cpp main.cpp body
+
+    We first construct a QApplication object which is configured using any
+    arguments passed in from the command line. After any widgets have been
+    created and shown, we call QApplication::exec() to start Qt's event loop.
+    Control passes to Qt until this function returns, at which point we return
+    the value we obtain from this function.
+
+    In each part of this tutorial, we provide an example that is written
+    entirely within a \c main() function. In more sophisticated examples, the
+    code to set up widgets and layouts is written in other parts of the
+    example. For example, the GUI for a main window may be set up in the
+    constructor of a QMainWindow subclass.
+
+    The \l{Widgets examples} are a good place to look for
+    more complex and complete examples and applications.
+
+    \section1 Building Examples and Tutorials
+
+    If you obtained a binary package of Qt or compiled it yourself, the
+    examples described in this tutorial should already be ready to run.
+    However, if you may wish to modify them and recompile them, you need to
+    perform the following steps:
+
+    \list 1
+    \o At the command line, enter the directory containing the example you
+       wish to recompile.
+    \o Type \c qmake and press \key{Return}. If this doesn't work, make sure
+       that the executable is on your path, or enter its full location.
+    \o On Linux/Unix and Mac OS X, type \c make and press \key{Return};
+       on Windows with Visual Studio, type \c nmake and press \key{Return}.
+    \endlist
+
+    An executable file should have been created within the current directory.
+    On Windows, this file may be located within a \c debug or \c release
+    subdirectory. You can run this file to see the example code at work.
+*/
+
+/*!
+    \page widgets-tutorial-toplevel.html
+    \contentspage {Widgets 教程}{目录}
+    \previouspage {Widgets 教程}
+    \nextpage {Widgets 教程 — Child Widgets}
+    \example tutorials/widgets/toplevel
+    \title Widgets 教程 — 创建窗口
+
+    如果 widget 未使用父级进行创建，则在显示时视为窗口或\e{顶层 widget}。由于顶层 widget 没有父级对象类来确保在其不再使用时就删除，因此需要开发人员在应用程序中对其进行跟踪。
+
+    在下例中，我们使用 QWidget 创建和显示具有默认大小的窗口：
+
+    \raw HTML
+    <table align="left" width="100%">
+    <tr class="qt-code"><td>
+    \endraw
+    \snippet tutorials/widgets/toplevel/main.cpp main program
+    \raw HTML
+    </td><td align="right">
+    \endraw
+    \inlineimage widgets-tutorial-toplevel.png
+    \raw HTML
+    </td></tr>
+    </table>
+    \endraw
+
+    To create a real GUI, we need to place widgets inside the window. To do
+    this, we pass a QWidget instance to a widget's constructor, as we will
+    demonstrate in the next part of this tutorial.
+*/
+
+/*!
+    \page widgets-tutorial-childwidget.html
+    \contentspage {Widgets 教程}{目录}
+    \previouspage {Widgets 教程 — 创建窗口}
+    \nextpage {Widgets 教程 — 使用布局}
+    \example tutorials/widgets/childwidget
+    \title Widgets 教程 — Child Widgets
+
+    我们可以通过将 \c window 作为父级传递给其构造器来向窗口添加子 widget。在这种情况下，我们向窗口添加按钮并将其放置在特定位置：
+
+    \raw HTML
+    <table align="left" width="100%">
+    <tr class="qt-code"><td>
+    \endraw
+    \snippet tutorials/widgets/childwidget/main.cpp main program
+    \raw HTML
+    </td><td align="right">
+    \endraw
+    \inlineimage widgets-tutorial-childwidget.png
+    \raw HTML
+    </td></tr>
+    </table>
+    \endraw
+
+    该按钮现在为窗口的子项，并在删除窗口时一同删除。请注意，隐藏或关闭窗口不会自动删除该按钮。
+*/
+
+/*!
+    \page widgets-tutorial-windowlayout.html
+    \contentspage {Widgets 教程}{目录}
+    \previouspage {Widgets 教程 — Child Widgets}
+    \nextpage {Widgets 教程 — Nested Layouts}
+    \example tutorials/widgets/windowlayout
+    \title Widgets 教程 — 使用布局
+
+    通常，子 widget 是通过使用布局对象在窗口中进行排列，而不是通过指定位置和大小进行排列。在此处，我们构造要并排排列的标签和行编辑框 widget。
+
+    \raw HTML
+    <table align="left" width="100%">
+    <tr class="qt-code"><td>
+    \endraw
+    \snippet tutorials/widgets/windowlayout/main.cpp main program
+    \raw HTML
+    </td><td align="right">
+    \endraw
+    \inlineimage widgets-tutorial-windowlayout.png
+    \raw HTML
+    </td></tr>
+    </table>
+    \endraw
+
+    我们构造的布局对象管理通过 \l{QHBoxLayout::}{addWidget()} 函数提供的 widget 的位置和大小。布局本身是通过调用 \l{QWidget::}{setLayout()} 提供给窗口的。布局仅可通过其对所管理的 widget（和其他布局）的效果才可显示。
+
+    在上文示例中，每个 widget 的所属关系并不明显。由于我们未使用父级对象构造 widget 和布局，我们会看到一个空窗口和两个包含了标签与行编辑框的窗口。不过，如果我们告知布局来管理标签和行编辑框，并在窗口中设置布局，两个 widget 与布局本身就都会成为窗口的子项。
+*/
+
+/*!
+    \page widgets-tutorial-nestedlayouts.html
+    \contentspage {Widgets 教程}{目录}
+    \previouspage {Widgets 教程 — 使用布局}
+    \example tutorials/widgets/nestedlayouts
+    \title Widgets 教程 — Nested Layouts
+
+    由于 widget 可包含其他 widget，布局可用来提供按不同层次分组的 widget。这里，我们要在显示查询结果的表视图上方、窗口顶部的行编辑框旁，显示一个标签。
+
+    We achieve this by creating two layouts: \c{queryLayout} is a QHBoxLayout
+    that contains QLabel and QLineEdit widgets placed side-by-side;
+    \c{mainLayout} is a QVBoxLayout that contains \c{queryLayout} and a
+    QTableView arranged vertically.
+
+    \raw HTML
+    <table align="left" width="100%">
+    <tr class="qt-code"><td>
+    \endraw
+    \snippet tutorials/widgets/nestedlayouts/main.cpp first part
+    \snippet tutorials/widgets/nestedlayouts/main.cpp last part
+    \raw HTML
+    </td><td align="right">
+    \endraw
+    \inlineimage widgets-tutorial-nestedlayouts.png
+    \raw HTML
+    </td></tr>
+    </table>
+    \endraw
+
+    Note that we call the \c{mainLayout}'s \l{QBoxLayout::}{addLayout()}
+    function to insert the \c{queryLayout} above the \c{resultView} table.
+
+    We have omitted the code that sets up the model containing the data shown
+    by the QTableView widget, \c resultView. For completeness, we show this below.
+
+    除了 QHBoxLayout 和 QVBoxLayout，Qt 还提供了 QGridLayout 和 QFormLayout 类来协助实现更复杂的用户界面。
+    These can be seen if you run \l{Qt Designer}.
+
+    \section1 Setting up the Model
+
+    In the code above, we did not show where the table's data came from
+    because we wanted to concentrate on the use of layouts. Here, we see
+    that the model holds a number of items corresponding to rows, each of
+    which is set up to contain data for two columns.
+
+    \snippet tutorials/widgets/nestedlayouts/main.cpp set up the model
+
+    The use of models and views is covered in the
+    \l{Item Views Examples} and in the \l{Model/View Programming} overview.
+*/