Long live Qt!

9 files changed, 1435 insertions, 0 deletions

diff --git a/src/3rdparty/patches/freetype-2.3.5-config.patch b/src/3rdparty/patches/freetype-2.3.5-config.patch
new file mode 100644
index 0000000..2653467
--- /dev/null
+++ b/src/3rdparty/patches/freetype-2.3.5-config.patch
@@ -0,0 +1,265 @@
+--- builds/unix/ftconfig.h	1970-01-01 01:00:00.000000000 +0100
++++ builds/unix/ftconfig.h	2007-07-15 00:00:00.000000000 +0200
+@@ -0,0 +1,262 @@
++/* ftconfig.h.  Generated by configure.  */
++/***************************************************************************/
++/*                                                                         */
++/*  ftconfig.in                                                            */
++/*                                                                         */
++/*    UNIX-specific configuration file (specification only).               */
++/*                                                                         */
++/*  Copyright 1996-2000, 2002 by                                           */
++/*  David Turner, Robert Wilhelm, and Werner Lemberg.                      */
++/*                                                                         */
++/*  This file is part of the FreeType project, and may only be used,       */
++/*  modified, and distributed under the terms of the FreeType project      */
++/*  license, LICENSE.TXT.  By continuing to use, modify, or distribute     */
++/*  this file you indicate that you have read the license and              */
++/*  understand and accept it fully.                                        */
++/*                                                                         */
++/***************************************************************************/
++
++
++  /*************************************************************************/
++  /*                                                                       */
++  /* This header file contains a number of macro definitions that are used */
++  /* by the rest of the engine.  Most of the macros here are automatically */
++  /* determined at compile time, and you should not need to change it to   */
++  /* port FreeType, except to compile the library with a non-ANSI          */
++  /* compiler.                                                             */
++  /*                                                                       */
++  /* Note however that if some specific modifications are needed, we       */
++  /* advise you to place a modified copy in your build directory.          */
++  /*                                                                       */
++  /* The build directory is usually `freetype/builds/<system>', and        */
++  /* contains system-specific files that are always included first when    */
++  /* building the library.                                                 */
++  /*                                                                       */
++  /*************************************************************************/
++
++
++#ifndef __FTCONFIG_H__
++#define __FTCONFIG_H__
++
++#include <ft2build.h>
++#include FT_CONFIG_OPTIONS_H
++#include FT_CONFIG_STANDARD_LIBRARY_H
++
++
++FT_BEGIN_HEADER
++
++
++  /*************************************************************************/
++  /*                                                                       */
++  /*               PLATFORM-SPECIFIC CONFIGURATION MACROS                  */
++  /*                                                                       */
++  /* These macros can be toggled to suit a specific system.  The current   */
++  /* ones are defaults used to compile FreeType in an ANSI C environment   */
++  /* (16bit compilers are also supported).  Copy this file to your own     */
++  /* `freetype/builds/<system>' directory, and edit it to port the engine. */
++  /*                                                                       */
++  /*************************************************************************/
++
++
++#define HAVE_UNISTD_H 1
++#define HAVE_FCNTL_H 1
++
++#define SIZEOF_INT 4
++#define SIZEOF_LONG 4
++
++#define FT_SIZEOF_INT   SIZEOF_INT
++#define FT_SIZEOF_LONG  SIZEOF_LONG
++
++
++  /* Preferred alignment of data */
++#define FT_ALIGNMENT  8
++
++
++  /* FT_UNUSED is a macro used to indicate that a given parameter is not  */
++  /* used -- this is only used to get rid of unpleasant compiler warnings */
++#ifndef FT_UNUSED
++#define FT_UNUSED( arg )  ( (arg) = (arg) )
++#endif
++
++
++  /*************************************************************************/
++  /*                                                                       */
++  /*                     AUTOMATIC CONFIGURATION MACROS                    */
++  /*                                                                       */
++  /* These macros are computed from the ones defined above.  Don't touch   */
++  /* their definition, unless you know precisely what you are doing.  No   */
++  /* porter should need to mess with them.                                 */
++  /*                                                                       */
++  /*************************************************************************/
++
++
++  /*************************************************************************/
++  /*                                                                       */
++  /* IntN types                                                            */
++  /*                                                                       */
++  /*   Used to guarantee the size of some specific integers.               */
++  /*                                                                       */
++  typedef signed short    FT_Int16;
++  typedef unsigned short  FT_UInt16;
++
++#if FT_SIZEOF_INT == 4
++
++  typedef signed int      FT_Int32;
++  typedef unsigned int    FT_UInt32;
++
++#elif FT_SIZEOF_LONG == 4
++
++  typedef signed long     FT_Int32;
++  typedef unsigned long   FT_UInt32;
++
++#else
++#error "no 32bit type found -- please check your configuration files"
++#endif
++
++#if FT_SIZEOF_LONG == 8
++
++  /* FT_LONG64 must be defined if a 64-bit type is available */
++#define FT_LONG64
++#define FT_INT64   long
++
++#else
++
++  /*************************************************************************/
++  /*                                                                       */
++  /* Many compilers provide the non-ANSI `long long' 64-bit type.  You can */
++  /* activate it by defining the FTCALC_USE_LONG_LONG macro in             */
++  /* `ftoption.h'.                                                         */
++  /*                                                                       */
++  /* Note that this will produce many -ansi warnings during library        */
++  /* compilation, and that in many cases,  the generated code will be      */
++  /* neither smaller nor faster!                                           */
++  /*                                                                       */
++#ifdef FTCALC_USE_LONG_LONG
++
++#define FT_LONG64
++#define FT_INT64   long long
++
++#endif /* FTCALC_USE_LONG_LONG */
++#endif /* FT_SIZEOF_LONG == 8 */
++
++
++#ifdef FT_MAKE_OPTION_SINGLE_OBJECT
++
++#define FT_LOCAL( x )      static  x
++#define FT_LOCAL_DEF( x )  static  x
++
++#else
++
++#ifdef __cplusplus
++#define FT_LOCAL( x )      extern "C"  x
++#define FT_LOCAL_DEF( x )  extern "C"  x
++#else
++#define FT_LOCAL( x )      extern  x
++#define FT_LOCAL_DEF( x )  extern  x
++#endif
++
++#endif /* FT_MAKE_OPTION_SINGLE_OBJECT */
++
++
++#ifndef FT_BASE
++
++#ifdef __cplusplus
++#define FT_BASE( x )  extern "C"  x
++#else
++#define FT_BASE( x )  extern  x
++#endif
++
++#endif /* !FT_BASE */
++
++
++#ifndef FT_BASE_DEF
++
++#ifdef __cplusplus
++#define FT_BASE_DEF( x )  extern "C"  x
++#else
++#define FT_BASE_DEF( x )  extern  x
++#endif
++
++#endif /* !FT_BASE_DEF */
++
++
++#ifndef FT_EXPORT
++
++#ifdef __cplusplus
++#define FT_EXPORT( x )  extern "C"  x
++#else
++#define FT_EXPORT( x )  extern  x
++#endif
++
++#endif /* !FT_EXPORT */
++
++
++#ifndef FT_EXPORT_DEF
++
++#ifdef __cplusplus
++#define FT_EXPORT_DEF( x )  extern "C"  x
++#else
++#define FT_EXPORT_DEF( x )  extern  x
++#endif
++
++#endif /* !FT_EXPORT_DEF */
++
++
++#ifndef FT_EXPORT_VAR
++
++#ifdef __cplusplus
++#define FT_EXPORT_VAR( x )  extern "C"  x
++#else
++#define FT_EXPORT_VAR( x )  extern  x
++#endif
++
++#endif /* !FT_EXPORT_VAR */
++
++  /* The following macros are needed to compile the library with a   */
++  /* C++ compiler and with 16bit compilers.                          */
++  /*                                                                 */
++
++  /* This is special.  Within C++, you must specify `extern "C"' for */
++  /* functions which are used via function pointers, and you also    */
++  /* must do that for structures which contain function pointers to  */
++  /* assure C linkage -- it's not possible to have (local) anonymous */
++  /* functions which are accessed by (global) function pointers.     */
++  /*                                                                 */
++  /*                                                                 */
++  /* FT_CALLBACK_DEF is used to _define_ a callback function.        */
++  /*                                                                 */
++  /* FT_CALLBACK_TABLE is used to _declare_ a constant variable that */
++  /* contains pointers to callback functions.                        */
++  /*                                                                 */
++  /* FT_CALLBACK_TABLE_DEF is used to _define_ a constant variable   */
++  /* that contains pointers to callback functions.                   */
++  /*                                                                 */
++  /*                                                                 */
++  /* Some 16bit compilers have to redefine these macros to insert    */
++  /* the infamous `_cdecl' or `__fastcall' declarations.             */
++  /*                                                                 */
++#ifndef FT_CALLBACK_DEF
++#ifdef __cplusplus
++#define FT_CALLBACK_DEF( x )  extern "C"  x
++#else
++#define FT_CALLBACK_DEF( x )  static  x
++#endif
++#endif /* FT_CALLBACK_DEF */
++
++#ifndef FT_CALLBACK_TABLE
++#ifdef __cplusplus
++#define FT_CALLBACK_TABLE      extern "C"
++#define FT_CALLBACK_TABLE_DEF  extern "C"
++#else
++#define FT_CALLBACK_TABLE      extern
++#define FT_CALLBACK_TABLE_DEF  /* nothing */
++#endif
++#endif /* FT_CALLBACK_TABLE */
++
++
++FT_END_HEADER
++
++#endif /* __FTCONFIG_H__ */
++
++
++/* END */
diff --git a/src/3rdparty/patches/freetype-2.3.6-ascii.patch b/src/3rdparty/patches/freetype-2.3.6-ascii.patch
new file mode 100644
index 0000000..cc46296
--- /dev/null
+++ b/src/3rdparty/patches/freetype-2.3.6-ascii.patch
@@ -0,0 +1,174 @@
+--- include/freetype/ftbbox.h.orig	2007-10-20 15:27:57.000000000 +0200
++++ include/freetype/ftbbox.h	2008-06-15 00:00:00.000000000 +0200
+@@ -61,7 +61,7 @@
+   /*    Computes the exact bounding box of an outline.  This is slower     */
+   /*    than computing the control box.  However, it uses an advanced      */
+   /*    algorithm which returns _very_ quickly when the two boxes          */
+-  /*    coincide.  Otherwise, the outline Bézier arcs are traversed to     */
++  /*    coincide.  Otherwise, the outline Bezier arcs are traversed to     */
+   /*    extract their extrema.                                             */
+   /*                                                                       */
+   /* <Input>                                                               */
+--- include/freetype/ftglyph.h.orig	2008-04-13 23:58:59.000000000 +0200
++++ include/freetype/ftglyph.h	2008-06-15 00:00:00.000000000 +0200
+@@ -354,10 +354,10 @@
+   /*                                                                       */
+   /* <Description>                                                         */
+   /*    Return a glyph's `control box'.  The control box encloses all the  */
+-  /*    outline's points, including Bézier control points.  Though it      */
++  /*    outline's points, including Bezier control points.  Though it      */
+   /*    coincides with the exact bounding box for most glyphs, it can be   */
+   /*    slightly larger in some situations (like when rotating an outline  */
+-  /*    which contains Bézier outside arcs).                               */
++  /*    which contains Bezier outside arcs).                               */
+   /*                                                                       */
+   /*    Computing the control box is very fast, while getting the bounding */
+   /*    box can take much more time as it needs to walk over all segments  */
+--- include/freetype/ftimage.h.orig	2008-05-31 08:46:38.000000000 +0200
++++ include/freetype/ftimage.h	2008-06-15 00:00:00.000000000 +0200
+@@ -318,11 +318,11 @@
+   /*                                                                       */
+   /*    tags       :: A pointer to an array of `n_points' chars, giving    */
+   /*                  each outline point's type.  If bit 0 is unset, the   */
+-  /*                  point is `off' the curve, i.e., a Bézier control     */
++  /*                  point is `off' the curve, i.e., a Bezier control     */
+   /*                  point, while it is `on' when set.                    */
+   /*                                                                       */
+   /*                  Bit 1 is meaningful for `off' points only.  If set,  */
+-  /*                  it indicates a third-order Bézier arc control point; */
++  /*                  it indicates a third-order Bezier arc control point; */
+   /*                  and a second-order control point if unset.           */
+   /*                                                                       */
+   /*    contours   :: An array of `n_contours' shorts, giving the end      */
+@@ -528,7 +528,7 @@
+   /*    A function pointer type use to describe the signature of a `conic  */
+   /*    to' function during outline walking/decomposition.                 */
+   /*                                                                       */
+-  /*    A `conic to' is emitted to indicate a second-order Bézier arc in   */
++  /*    A `conic to' is emitted to indicate a second-order Bezier arc in   */
+   /*    the outline.                                                       */
+   /*                                                                       */
+   /* <Input>                                                               */
+@@ -560,12 +560,12 @@
+   /*    A function pointer type used to describe the signature of a `cubic */
+   /*    to' function during outline walking/decomposition.                 */
+   /*                                                                       */
+-  /*    A `cubic to' is emitted to indicate a third-order Bézier arc.      */
++  /*    A `cubic to' is emitted to indicate a third-order Bezier arc.      */
+   /*                                                                       */
+   /* <Input>                                                               */
+-  /*    control1 :: A pointer to the first Bézier control point.           */
++  /*    control1 :: A pointer to the first Bezier control point.           */
+   /*                                                                       */
+-  /*    control2 :: A pointer to the second Bézier control point.          */
++  /*    control2 :: A pointer to the second Bezier control point.          */
+   /*                                                                       */
+   /*    to       :: A pointer to the target end point.                     */
+   /*                                                                       */
+@@ -591,7 +591,7 @@
+   /*                                                                       */
+   /* <Description>                                                         */
+   /*    A structure to hold various function pointers used during outline  */
+-  /*    decomposition in order to emit segments, conic, and cubic Béziers, */
++  /*    decomposition in order to emit segments, conic, and cubic Beziers, */
+   /*    as well as `move to' and `close to' operations.                    */
+   /*                                                                       */
+   /* <Fields>                                                              */
+@@ -599,9 +599,9 @@
+   /*                                                                       */
+   /*    line_to  :: The segment emitter.                                   */
+   /*                                                                       */
+-  /*    conic_to :: The second-order Bézier arc emitter.                   */
++  /*    conic_to :: The second-order Bezier arc emitter.                   */
+   /*                                                                       */
+-  /*    cubic_to :: The third-order Bézier arc emitter.                    */
++  /*    cubic_to :: The third-order Bezier arc emitter.                    */
+   /*                                                                       */
+   /*    shift    :: The shift that is applied to coordinates before they   */
+   /*                are sent to the emitter.                               */
+@@ -698,7 +698,7 @@
+   /*                                                                       */
+   /*    FT_GLYPH_FORMAT_OUTLINE ::                                         */
+   /*      The glyph image is a vectorial outline made of line segments     */
+-  /*      and Bézier arcs; it can be described as an @FT_Outline; you      */
++  /*      and Bezier arcs; it can be described as an @FT_Outline; you      */
+   /*      generally want to access the `outline' field of the              */
+   /*      @FT_GlyphSlotRec structure to read it.                           */
+   /*                                                                       */
+--- include/freetype/ftoutln.h.orig      2008-05-29 00:05:07.000000000 +0200
++++ include/freetype/ftoutln.h   2008-06-15 00:00:00.000000000 +0200
+@@ -85,7 +85,7 @@
+   /*                                                                       */
+   /* <Description>                                                         */
+   /*    Walks over an outline's structure to decompose it into individual  */
+-  /*    segments and Bézier arcs.  This function is also able to emit      */
++  /*    segments and Bezier arcs.  This function is also able to emit      */
+   /*    `move to' and `close to' operations to indicate the start and end  */
+   /*    of new contours in the outline.                                    */
+   /*                                                                       */
+@@ -213,10 +213,10 @@
+   /*                                                                       */
+   /* <Description>                                                         */
+   /*    Returns an outline's `control box'.  The control box encloses all  */
+-  /*    the outline's points, including Bézier control points.  Though it  */
++  /*    the outline's points, including Bezier control points.  Though it  */
+   /*    coincides with the exact bounding box for most glyphs, it can be   */
+   /*    slightly larger in some situations (like when rotating an outline  */
+-  /*    which contains Bézier outside arcs).                               */
++  /*    which contains Bezier outside arcs).                               */
+   /*                                                                       */
+   /*    Computing the control box is very fast, while getting the bounding */
+   /*    box can take much more time as it needs to walk over all segments  */
+--- include/freetype/ftstroke.h.orig     2008-05-29 00:06:54.000000000 +0200
++++ include/freetype/ftstroke.h  2008-06-15 00:00:00.000000000 +0200
+@@ -407,7 +407,7 @@
+    *   FT_Stroker_ConicTo
+    *
+    * @description:
+-   *   `Draw' a single quadratic Bézier in the stroker's current sub-path,
++   *   `Draw' a single quadratic Bezier in the stroker's current sub-path,
+    *   from the last position.
+    *
+    * @input:
+@@ -415,7 +415,7 @@
+    *     The target stroker handle.
+    *
+    *   control ::
+-   *     A pointer to a Bézier control point.
++   *     A pointer to a Bezier control point.
+    *
+    *   to ::
+    *     A pointer to the destination point.
+@@ -439,7 +439,7 @@
+    *   FT_Stroker_CubicTo
+    *
+    * @description:
+-   *   `Draw' a single cubic Bézier in the stroker's current sub-path,
++   *   `Draw' a single cubic Bezier in the stroker's current sub-path,
+    *   from the last position.
+    *
+    * @input:
+@@ -447,10 +447,10 @@
+    *     The target stroker handle.
+    *
+    *   control1 ::
+-   *     A pointer to the first Bézier control point.
++   *     A pointer to the first Bezier control point.
+    *
+    *   control2 ::
+-   *     A pointer to second Bézier control point.
++   *     A pointer to second Bezier control point.
+    *
+    *   to ::
+    *     A pointer to the destination point.
+--- include/freetype/ftwinfnt.h.orig     2008-05-28 23:27:19.000000000 +0200
++++ include/freetype/ftwinfnt.h  2008-06-15 00:00:00.000000000 +0200
+@@ -77,7 +77,7 @@
+    *     Mac Roman encoding.
+    *
+    *   FT_WinFNT_ID_OEM ::
+-   *     From Michael Pöttgen <michael@poettgen.de>:
++   *     From Michael Poettgen <michael@poettgen.de>:
+    *
+    *       The `Windows Font Mapping' article says that FT_WinFNT_ID_OEM
+    *       is used for the charset of vector fonts, like `modern.fon',
diff --git a/src/3rdparty/patches/libjpeg-6b-config.patch b/src/3rdparty/patches/libjpeg-6b-config.patch
new file mode 100644
index 0000000..3012b8f
--- /dev/null
+++ b/src/3rdparty/patches/libjpeg-6b-config.patch
@@ -0,0 +1,50 @@
+--- jconfig.h.orig	1970-01-01 01:00:00.000000000 +0100
++++ jconfig.h	2006-06-15 00:00:00.000000000 +0200
+@@ -0,0 +1,47 @@
++/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */
++/* see jconfig.doc for explanations */
++
++#define HAVE_PROTOTYPES
++#define HAVE_UNSIGNED_CHAR
++#define HAVE_UNSIGNED_SHORT
++/* #define void char */
++/* #define const */
++#undef CHAR_IS_UNSIGNED
++#define HAVE_STDDEF_H
++#define HAVE_STDLIB_H
++#undef NEED_BSD_STRINGS
++#undef NEED_SYS_TYPES_H
++#undef NEED_FAR_POINTERS	/* we presume a 32-bit flat memory model */
++#undef NEED_SHORT_EXTERNAL_NAMES
++#undef INCOMPLETE_TYPES_BROKEN
++
++#if defined(_WIN32)
++/* Define "boolean" as unsigned char, not int, per Windows custom */
++#ifndef __RPCNDR_H__		/* don't conflict if rpcndr.h already read */
++typedef unsigned char boolean;
++#endif
++#define HAVE_BOOLEAN		/* prevent jmorecfg.h from redefining it */
++#endif
++
++
++#ifdef JPEG_INTERNALS
++
++#undef RIGHT_SHIFT_IS_UNSIGNED
++
++#endif /* JPEG_INTERNALS */
++
++#ifdef JPEG_CJPEG_DJPEG
++
++#define BMP_SUPPORTED		/* BMP image file format */
++#define GIF_SUPPORTED		/* GIF image file format */
++#define PPM_SUPPORTED		/* PBMPLUS PPM/PGM image file format */
++#undef RLE_SUPPORTED		/* Utah RLE image file format */
++#define TARGA_SUPPORTED		/* Targa image file format */
++
++#define TWO_FILE_COMMANDLINE	/* optional */
++#define USE_SETMODE		/* Microsoft has setmode() */
++#undef NEED_SIGNAL_CATCHER
++#undef DONT_USE_B_MODE
++#undef PROGRESS_REPORT		/* optional */
++
++#endif /* JPEG_CJPEG_DJPEG */
diff --git a/src/3rdparty/patches/libmng-1.0.10-endless-loop.patch b/src/3rdparty/patches/libmng-1.0.10-endless-loop.patch
new file mode 100644
index 0000000..31f0474
--- /dev/null
+++ b/src/3rdparty/patches/libmng-1.0.10-endless-loop.patch
@@ -0,0 +1,65 @@
+--- libmng_data.h.orig	2007-04-20 10:41:58.000000000 +0200
++++ libmng_data.h	2007-07-14 00:00:00.000000000 +0200
+@@ -658,6 +658,9 @@
+            mng_int32         iFrameclipb;
+ 
+            mng_uint32        iNextdelay;         /* delay *after* next image */
++
++           mng_bool          bForcedelay;
++           mng_uint32        iAccumdelay;
+ #endif
+ 
+ #ifndef MNG_SKIPCHUNK_SHOW
+--- libmng_display.c.orig	2007-04-20 10:41:58.000000000 +0200
++++ libmng_display.c	2007-07-14 00:00:00.000000000 +0200
+@@ -384,8 +384,9 @@
+ 
+   {
+ #ifndef MNG_SKIPCHUNK_FRAM
+-    if (pData->iFramedelay > 0)        /* real delay ? */
++    if (pData->iFramedelay > 0 || pData->bForcedelay) /* real delay ? */
+     {                                  /* let the app refresh first ? */
++      pData->bForcedelay = MNG_FALSE;
+       if ((pData->bRunning) && (!pData->bSkipping) &&
+           (pData->iUpdatetop < pData->iUpdatebottom) && (pData->iUpdateleft < pData->iUpdateright))
+         if (!pData->fRefresh (((mng_handle)pData),
+@@ -455,6 +456,7 @@
+       pData->iFrametime = pData->iFrametime + iWaitfor;
+                                        /* setup for next delay */
+     pData->iFramedelay = pData->iNextdelay;
++    pData->iAccumdelay += pData->iFramedelay;
+ #endif
+   }
+ 
+@@ -3340,6 +3342,9 @@
+   MNG_TRACE (pData, MNG_FN_PROCESS_DISPLAY_MEND, MNG_LC_START);
+ #endif
+ 
++  pData->bForcedelay = pData->iAccumdelay ? MNG_FALSE : MNG_TRUE;
++  pData->iAccumdelay = 0;
++
+ #ifdef MNG_SUPPORT_DYNAMICMNG
+   if (pData->bStopafterseek)           /* need to stop after this ? */
+   {
+--- libmng_hlapi.c.orig	2007-07-06 18:23:04.000000000 +0200
++++ libmng_hlapi.c	2007-07-14 00:00:00.000000000 +0200
+@@ -446,6 +446,9 @@
+   pData->iFrameclipb           = 0;
+ 
+   pData->iNextdelay            = 1;
++
++  pData->bForcedelay           = MNG_FALSE;
++  pData->iAccumdelay           = 0;
+ #endif
+ 
+ #ifndef MNG_SKIPCHUNK_SHOW
+@@ -1737,6 +1740,9 @@
+   pData->iFrameclipb           = 0;
+ 
+   pData->iNextdelay            = 1;
++
++  pData->bForcedelay           = MNG_FALSE;
++  pData->iAccumdelay           = 0;
+ #endif
+ 
+ #ifndef MNG_SKIPCHUNK_SHOW
diff --git a/src/3rdparty/patches/libpng-1.2.20-elf-visibility.patch b/src/3rdparty/patches/libpng-1.2.20-elf-visibility.patch
new file mode 100644
index 0000000..a374cbf
--- /dev/null
+++ b/src/3rdparty/patches/libpng-1.2.20-elf-visibility.patch
@@ -0,0 +1,17 @@
+--- pngconf.h.orig	2007-09-08 05:22:56.000000000 +0200
++++ pngconf.h	2007-09-09 00:00:00.000000000 +0200
+@@ -1375,6 +1375,14 @@
+ #      if 0 /* ... other platforms, with other meanings */
+ #      endif
+ #   endif
++
++#   if !defined(PNG_IMPEXP)
++#       include <qconfig.h>
++#       if defined(QT_VISIBILITY_AVAILABLE)
++#           define PNG_IMPEXP __attribute__((visibility("default")))
++#       endif
++#   endif
++
+ #endif
+ 
+ #ifndef PNGAPI
diff --git a/src/3rdparty/patches/libtiff-3.8.2-config.patch b/src/3rdparty/patches/libtiff-3.8.2-config.patch
new file mode 100644
index 0000000..44230ea
--- /dev/null
+++ b/src/3rdparty/patches/libtiff-3.8.2-config.patch
@@ -0,0 +1,374 @@
+--- libtiff/tif_config.h	1970-01-01 01:00:00.000000000 +0100
++++ libtiff/tif_config.h	2008-05-25 00:00:00.000000000 +0200
+@@ -0,0 +1,296 @@
++/*
++  Configuration defines by Trolltech.
++*/
++
++#include <qglobal.h>
++#if defined(Q_OS_WINCE)
++# include <qfunctions_wince.h>
++#endif
++
++/* Support CCITT Group 3 & 4 algorithms */
++#define CCITT_SUPPORT 1
++
++/* Pick up YCbCr subsampling info from the JPEG data stream to support files
++   lacking the tag (default enabled). */
++#define CHECK_JPEG_YCBCR_SUBSAMPLING 1
++
++/* Support C++ stream API (requires C++ compiler) */
++/* #undef CXX_SUPPORT */
++
++/* Treat extra sample as alpha (default enabled). The RGBA interface will
++   treat a fourth sample with no EXTRASAMPLE_ value as being ASSOCALPHA. Many
++   packages produce RGBA files but don't mark the alpha properly. */
++#define DEFAULT_EXTRASAMPLE_AS_ALPHA 1
++
++/* Use the Apple OpenGL framework. */
++/* #undef HAVE_APPLE_OPENGL_FRAMEWORK */
++
++/* Define to 1 if you have the <assert.h> header file. */
++#define HAVE_ASSERT_H 1
++
++/* Define to 1 if you have the <dlfcn.h> header file. */
++/* #undef HAVE_DLFCN_H */
++
++/* Define to 1 if you have the <fcntl.h> header file. */
++#if !defined(Q_OS_WINCE)
++#define HAVE_FCNTL_H 1
++#endif
++
++/* Define to 1 if you have the `floor' function. */
++/* #undef HAVE_FLOOR */
++
++/* Define to 1 if you have the `getopt' function. */
++/* #undef HAVE_GETOPT */
++
++/* Define as 0 or 1 according to the floating point format suported by the
++   machine */
++#define HAVE_IEEEFP 1
++
++/* Define to 1 if the system has the type `int16'. */
++/* #undef HAVE_INT16 */
++#ifdef Q_OS_AIX
++#define HAVE_INT16 1
++#endif
++
++/* Define to 1 if the system has the type `int32'. */
++/* #undef HAVE_INT32 */
++#ifdef Q_OS_AIX
++#define HAVE_INT32 1
++#endif
++
++/* Define to 1 if the system has the type `int8'. */
++/* #undef HAVE_INT8 */
++#ifdef Q_OS_AIX
++#define HAVE_INT8 1
++#endif
++
++/* Define to 1 if you have the <inttypes.h> header file. */
++/* #undef HAVE_INTTYPES_H */
++
++/* Define to 1 if you have the `isascii' function. */
++/* #undef HAVE_ISASCII */
++
++/* Define to 1 if you have the `lfind' function. */
++/* #undef HAVE_LFIND */
++
++/* Define to 1 if you have the `c' library (-lc). */
++/* #undef HAVE_LIBC */
++
++/* Define to 1 if you have the `m' library (-lm). */
++/* #undef HAVE_LIBM */
++
++/* Define to 1 if you have the <limits.h> header file. */
++/* #undef HAVE_LIMITS_H */
++
++/* Define to 1 if you have the <malloc.h> header file. */
++/* #undef HAVE_MALLOC_H */
++
++/* Define to 1 if you have the `memmove' function. */
++/* #undef HAVE_MEMMOVE */
++
++/* Define to 1 if you have the <memory.h> header file. */
++/* #undef HAVE_MEMORY_H */
++
++/* Define to 1 if you have the `memset' function. */
++/* #undef HAVE_MEMSET */
++
++/* Define to 1 if you have the `mmap' function. */
++/* #undef HAVE_MMAP */
++
++/* Define to 1 if you have the `pow' function. */
++/* #undef HAVE_POW */
++
++/* Define if you have POSIX threads libraries and header files. */
++/* #undef HAVE_PTHREAD */
++
++/* Define to 1 if you have the <search.h> header file. */
++#if !defined(Q_OS_WINCE)
++#define HAVE_SEARCH_H 1
++#endif
++
++/* Define to 1 if you have the `sqrt' function. */
++/* #undef HAVE_SQRT */
++
++/* Define to 1 if you have the <stdint.h> header file. */
++/* #undef HAVE_STDINT_H */
++
++/* Define to 1 if you have the <stdlib.h> header file. */
++/* #undef HAVE_STDLIB_H */
++
++/* Define to 1 if you have the `strcasecmp' function. */
++/* #undef HAVE_STRCASECMP */
++
++/* Define to 1 if you have the `strchr' function. */
++/* #undef HAVE_STRCHR */
++
++/* Define to 1 if you have the <strings.h> header file. */
++/* #undef HAVE_STRINGS_H */
++
++/* Define to 1 if you have the <string.h> header file. */
++#define HAVE_STRING_H 1
++
++/* Define to 1 if you have the `strrchr' function. */
++/* #undef HAVE_STRRCHR */
++
++/* Define to 1 if you have the `strstr' function. */
++/* #undef HAVE_STRSTR */
++
++/* Define to 1 if you have the `strtol' function. */
++/* #undef HAVE_STRTOL */
++
++/* Define to 1 if you have the `strtoul' function. */
++/* #undef HAVE_STRTOUL */
++
++/* Define to 1 if you have the <sys/stat.h> header file. */
++/* #undef HAVE_SYS_STAT_H */
++
++/* Define to 1 if you have the <sys/time.h> header file. */
++/* #undef HAVE_SYS_TIME_H */
++
++/* Define to 1 if you have the <sys/types.h> header file. */
++#define HAVE_SYS_TYPES_H 1
++
++/* Define to 1 if you have the <unistd.h> header file. */
++#define HAVE_UNISTD_H 1
++
++/* Define to 1 if you have the <windows.h> header file. */
++/* #undef HAVE_WINDOWS_H */
++#ifdef Q_OS_WIN
++#define TIF_PLATFORM_CONSOLE
++#endif
++
++/* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian
++   (Intel) */
++#if (Q_BYTE_ORDER == Q_BIG_ENDIAN)
++#define HOST_BIGENDIAN 1
++#else
++#define HOST_BIGENDIAN 0
++#endif
++
++/* Set the native cpu bit order (FILLORDER_LSB2MSB or FILLORDER_MSB2LSB) */
++#define HOST_FILLORDER FILLORDER_LSB2MSB
++
++/* Support JPEG compression (requires IJG JPEG library) */
++/* #undef JPEG_SUPPORT */
++
++/* Support LogLuv high dynamic range encoding */
++#define LOGLUV_SUPPORT 1
++
++/* Define to the sub-directory in which libtool stores uninstalled libraries.
++   */
++/* #undef LT_OBJDIR */
++
++/* Support LZW algorithm */
++#define LZW_SUPPORT 1
++
++/* Support Microsoft Document Imaging format */
++#define MDI_SUPPORT 1
++
++/* Support NeXT 2-bit RLE algorithm */
++#define NEXT_SUPPORT 1
++
++/* Define to 1 if your C compiler doesn't accept -c and -o together. */
++/* #undef NO_MINUS_C_MINUS_O */
++
++/* Support Old JPEG compresson (read contrib/ojpeg/README first! Compilation
++   fails with unpatched IJG JPEG library) */
++/* #undef OJPEG_SUPPORT */
++
++/* Name of package */
++/* #undef PACKAGE */
++
++/* Define to the address where bug reports for this package should be sent. */
++/* #undef PACKAGE_BUGREPORT */
++
++/* Define to the full name of this package. */
++/* #undef PACKAGE_NAME */
++
++/* Define to the full name and version of this package. */
++/* #undef PACKAGE_STRING */
++
++/* Define to the one symbol short name of this package. */
++/* #undef PACKAGE_TARNAME */
++
++/* Define to the version of this package. */
++/* #undef PACKAGE_VERSION */
++
++/* Support Macintosh PackBits algorithm */
++#define PACKBITS_SUPPORT 1
++
++/* Support Pixar log-format algorithm (requires Zlib) */
++#define PIXARLOG_SUPPORT 1
++
++/* Define to necessary symbol if this constant uses a non-standard name on
++   your system. */
++/* #undef PTHREAD_CREATE_JOINABLE */
++
++/* The size of a `int', as computed by sizeof. */
++#define SIZEOF_INT 4
++
++/* The size of a `long', as computed by sizeof. */
++#if (QT_POINTER_SIZE == 8) && !defined(Q_OS_WIN64)
++#define SIZEOF_LONG 8
++#else
++#define SIZEOF_LONG 4
++#endif
++
++/* Define to 1 if you have the ANSI C header files. */
++/* #undef STDC_HEADERS */
++
++/* Support strip chopping (whether or not to convert single-strip uncompressed
++   images to mutiple strips of specified size to reduce memory usage) */
++#define STRIPCHOP_DEFAULT TIFF_STRIPCHOP
++
++/* Default size of the strip in bytes (when strip chopping enabled) */
++/* #undef STRIP_SIZE_DEFAULT */
++
++/* Enable SubIFD tag (330) support */
++#define SUBIFD_SUPPORT 1
++
++/* Support ThunderScan 4-bit RLE algorithm */
++#define THUNDER_SUPPORT 1
++
++/* Define to 1 if you can safely include both <sys/time.h> and <time.h>. */
++/* #undef TIME_WITH_SYS_TIME */
++
++/* Define to 1 if your <sys/time.h> declares `struct tm'. */
++/* #undef TM_IN_SYS_TIME */
++
++/* Version number of package */
++/* #undef VERSION */
++
++/* Define to 1 if your processor stores words with the most significant byte
++   first (like Motorola and SPARC, unlike Intel and VAX). */
++#if (Q_BYTE_ORDER == Q_BIG_ENDIAN)
++#define WORDS_BIGENDIAN 1
++#else
++/* #undef WORDS_BIGENDIAN */
++#endif
++
++/* Define to 1 if the X Window System is missing or not being used. */
++/* #undef X_DISPLAY_MISSING */
++
++/* Support Deflate compression */
++#define ZIP_SUPPORT 1
++
++/* Number of bits in a file offset, on hosts where this is settable. */
++/* #undef _FILE_OFFSET_BITS */
++
++/* Define for large files, on AIX-style hosts. */
++/* #undef _LARGE_FILES */
++
++/* Define to empty if `const' does not conform to ANSI C. */
++/* #undef const */
++
++/* Define to `__inline__' or `__inline' if that's what the C compiler
++   calls it, or to nothing if 'inline' is not supported under any name.  */
++#ifndef __cplusplus
++#undef inline
++#define inline
++#endif
++
++/* Define to `long' if <sys/types.h> does not define. */
++/* #undef off_t */
++
++/* Define to `unsigned' if <sys/types.h> does not define. */
++/* #undef size_t */
+--- libtiff/tiffconf.h	2006-03-23 15:55:22.000000000 +0100
++++ libtiff/tiffconf.h	2008-05-25 00:00:00.000000000 +0200
+@@ -1,6 +1,5 @@
+-/* libtiff/tiffconf.h.  Generated by configure.  */
+ /*
+-  Configuration defines for installed libtiff.
++  Configuration defines by Trolltech.
+   This file maintained for backward compatibility. Do not use definitions
+   from this file in your programs.
+ */
+@@ -8,6 +7,8 @@
+ #ifndef _TIFFCONF_
+ #define _TIFFCONF_
+ 
++#include <qglobal.h>
++
+ /* Define to 1 if the system has the type `int16'. */
+ /* #undef HAVE_INT16 */
+ 
+@@ -21,7 +22,11 @@
+ #define SIZEOF_INT 4
+ 
+ /* The size of a `long', as computed by sizeof. */
++#if (QT_POINTER_SIZE == 8) && !defined(Q_OS_WIN64)
++#define SIZEOF_LONG 8
++#else
+ #define SIZEOF_LONG 4
++#endif
+ 
+ /* Compatibility stuff. */
+ 
+@@ -34,13 +39,17 @@
+ 
+ /* Native cpu byte order: 1 if big-endian (Motorola) or 0 if little-endian
+    (Intel) */
++#if (Q_BYTE_ORDER == Q_BIG_ENDIAN)
++#define HOST_BIGENDIAN 1
++#else
+ #define HOST_BIGENDIAN 0
++#endif
+ 
+ /* Support CCITT Group 3 & 4 algorithms */
+ #define CCITT_SUPPORT 1
+ 
+ /* Support JPEG compression (requires IJG JPEG library) */
+-#define JPEG_SUPPORT 1
++/* #undef JPEG_SUPPORT */
+ 
+ /* Support LogLuv high dynamic range encoding */
+ #define LOGLUV_SUPPORT 1
+--- libtiff/tiffiop.h	2006-03-21 17:42:50.000000000 +0100
++++ libtiff/tiffiop.h	2008-05-25 00:00:00.000000000 +0200
+@@ -37,7 +37,12 @@
+ #endif
+ 
+ #ifdef HAVE_SYS_TYPES_H
++#if !defined(Q_OS_WINCE)
+ # include <sys/types.h>
++#else
++# include <windows.h>
++# include <types.h>
++#endif
+ #endif
+ 
+ #ifdef HAVE_STRING_H
+--- libtiff/tif_win32.c	2006-02-07 14:51:03.000000000 +0100
++++ libtiff/tif_win32.c	2008-05-25 00:00:00.000000000 +0200
+@@ -29,6 +29,7 @@
+  * Scott Wagner (wagner@itek.com), Itek Graphix, Rochester, NY USA
+  */
+ #include "tiffiop.h"
++#include <windows.h>
+ 
+ static tsize_t
+ _tiffReadProc(thandle_t fd, tdata_t buf, tsize_t size)
diff --git a/src/3rdparty/patches/sqlite-3.5.6-config.patch b/src/3rdparty/patches/sqlite-3.5.6-config.patch
new file mode 100644
index 0000000..cf158ea
--- /dev/null
+++ b/src/3rdparty/patches/sqlite-3.5.6-config.patch
@@ -0,0 +1,38 @@
+--- sqlite3.c.orig	2008-02-06 16:03:28.000000000 +0100
++++ sqlite3.c	2008-02-13 00:00:00.000000000 +0100
+@@ -16823,6 +16823,8 @@
+ */
+ #if OS_UNIX              /* This file is used on unix only */
+ 
++#include <qconfig.h>
++
+ /* #define SQLITE_ENABLE_LOCKING_STYLE 0 */
+ 
+ /*
+@@ -16865,7 +16867,7 @@
+ ** If we are to be thread-safe, include the pthreads header and define
+ ** the SQLITE_UNIX_THREADS macro.
+ */
+-#if SQLITE_THREADSAFE
++#ifndef QT_NO_THREAD
+ # define SQLITE_UNIX_THREADS 1
+ #endif
+ 
+@@ -19739,6 +19741,8 @@
+ ** desktops but not so well in embedded systems.
+ */
+ 
++#include <qconfig.h>
++
+ #include <winbase.h>
+ 
+ #ifdef __CYGWIN__
+@@ -19748,7 +19752,7 @@
+ /*
+ ** Macros used to determine whether or not to use threads.
+ */
+-#if defined(THREADSAFE) && THREADSAFE
++#ifndef QT_NO_THREAD
+ # define SQLITE_W32_THREADS 1
+ #endif
+ 
diff --git a/src/3rdparty/patches/sqlite-3.5.6-wince.patch b/src/3rdparty/patches/sqlite-3.5.6-wince.patch
new file mode 100644
index 0000000..02965f8
--- /dev/null
+++ b/src/3rdparty/patches/sqlite-3.5.6-wince.patch
@@ -0,0 +1,19 @@
+--- sqlite3.c.orig	2008-02-06 16:03:28.000000000 +0100
++++ sqlite3.c	2008-02-13 00:00:00.000000000 +0100
+@@ -8837,6 +8837,16 @@
+ }
+ 
+ /*
++** Windows CE does not declare the localtime
++** function as it is not defined anywhere.
++** Anyway we need the forward-declaration to be
++** able to define it later on.
++*/
++#if defined(_WIN32_WCE) && (_WIN32_WCE >= 0x600)
++struct tm *__cdecl localtime(const time_t *t);
++#endif
++
++/*
+ ** Compute the difference (in days) between localtime and UTC (a.k.a. GMT)
+ ** for the time value p where p is in UTC.
+ */
diff --git a/src/3rdparty/patches/zlib-1.2.3-elf-visibility.patch b/src/3rdparty/patches/zlib-1.2.3-elf-visibility.patch
new file mode 100644
index 0000000..83899ad
--- /dev/null
+++ b/src/3rdparty/patches/zlib-1.2.3-elf-visibility.patch
@@ -0,0 +1,433 @@
+--- compress.c.orig	2003-07-07 07:37:56.000000000 +0200
++++ compress.c	2006-06-16 00:00:00.000000000 +0200
+@@ -59,7 +59,7 @@
+ 
+ /* ===========================================================================
+  */
+-int ZEXPORT compress (dest, destLen, source, sourceLen)
++int Q_ZEXPORT compress (dest, destLen, source, sourceLen)
+     Bytef *dest;
+     uLongf *destLen;
+     const Bytef *source;
+--- gzio.c.orig	2005-07-11 22:31:48.000000000 +0200
++++ gzio.c	2006-08-25 00:00:00.000000000 +0200
+@@ -205,7 +205,7 @@
+ /* ===========================================================================
+      Opens a gzip (.gz) file for reading or writing.
+ */
+-gzFile ZEXPORT gzopen (path, mode)
++gzFile Q_ZEXPORT gzopen (path, mode)
+     const char *path;
+     const char *mode;
+ {
+@@ -391,7 +391,7 @@
+      Reads the given number of uncompressed bytes from the compressed file.
+    gzread returns the number of bytes actually read (0 for end of file).
+ */
+-int ZEXPORT gzread (file, buf, len)
++int Q_ZEXPORT gzread (file, buf, len)
+     gzFile file;
+     voidp buf;
+     unsigned len;
+@@ -600,7 +600,7 @@
+ #ifdef STDC
+ #include <stdarg.h>
+ 
+-int ZEXPORTVA gzprintf (gzFile file, const char *format, /* args */ ...)
++int Q_ZEXPORT gzprintf (gzFile file, const char *format, /* args */ ...)
+ {
+     char buf[Z_PRINTF_BUFSIZE];
+     va_list va;
+@@ -634,7 +634,7 @@
+ }
+ #else /* not ANSI C */
+ 
+-int ZEXPORTVA gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
++int Q_ZEXPORT gzprintf (file, format, a1, a2, a3, a4, a5, a6, a7, a8, a9, a10,
+                        a11, a12, a13, a14, a15, a16, a17, a18, a19, a20)
+     gzFile file;
+     const char *format;
+@@ -950,7 +950,7 @@
+      Flushes all pending output if necessary, closes the compressed file
+    and deallocates all the (de)compression state.
+ */
+-int ZEXPORT gzclose (file)
++int Q_ZEXPORT gzclose (file)
+     gzFile file;
+ {
+     gz_stream *s = (gz_stream*)file;
+--- uncompr.c.orig	2003-07-07 07:36:56.000000000 +0200
++++ uncompr.c	2006-06-16 00:00:00.000000000 +0200
+@@ -23,7 +23,7 @@
+    enough memory, Z_BUF_ERROR if there was not enough room in the output
+    buffer, or Z_DATA_ERROR if the input data was corrupted.
+ */
+-int ZEXPORT uncompress (dest, destLen, source, sourceLen)
++int Q_ZEXPORT uncompress (dest, destLen, source, sourceLen)
+     Bytef *dest;
+     uLongf *destLen;
+     const Bytef *source;
+--- zlib.h.orig	2005-07-18 04:26:49.000000000 +0200
++++ zlib.h	2006-08-25 00:00:00.000000000 +0200
+@@ -32,6 +32,7 @@
+ #define ZLIB_H
+ 
+ #include "zconf.h"
++#include "qconfig.h"
+ 
+ #ifdef __cplusplus
+ extern "C" {
+@@ -40,6 +41,19 @@
+ #define ZLIB_VERSION "1.2.3"
+ #define ZLIB_VERNUM 0x1230
+ 
++#if defined(QT_VISIBILITY_AVAILABLE)
++# define Q_ZEXPORT __attribute__((visibility("default")))
++#else
++# ifdef QT_MAKEDLL
++# define Q_ZEXPORT __declspec(dllexport)
++# else
++# define Q_ZEXPORT ZEXPORT
++# endif
++#endif
++#ifdef Q_OS_TEMP
++#include <qfunctions_wce.h>
++#endif
++
+ /*
+      The 'zlib' compression library provides in-memory compression and
+   decompression functions, including integrity checks of the uncompressed
+@@ -209,7 +223,7 @@
+ 
+                         /* basic functions */
+ 
+-ZEXTERN const char * ZEXPORT zlibVersion OF((void));
++ZEXTERN Q_ZEXPORT const char * zlibVersion OF((void));
+ /* The application can compare zlibVersion and ZLIB_VERSION for consistency.
+    If the first character differs, the library code actually used is
+    not compatible with the zlib.h header file used by the application.
+@@ -239,7 +253,7 @@
+ */
+ 
+ 
+-ZEXTERN int ZEXPORT deflate OF((z_streamp strm, int flush));
++ZEXTERN int Q_ZEXPORT deflate OF((z_streamp strm, int flush));
+ /*
+     deflate compresses as much data as possible, and stops when the input
+   buffer becomes empty or the output buffer becomes full. It may introduce some
+@@ -325,7 +339,7 @@
+ */
+ 
+ 
+-ZEXTERN int ZEXPORT deflateEnd OF((z_streamp strm));
++ZEXTERN int Q_ZEXPORT deflateEnd OF((z_streamp strm));
+ /*
+      All dynamically allocated data structures for this stream are freed.
+    This function discards any unprocessed input and does not flush any
+@@ -360,7 +374,7 @@
+ */
+ 
+ 
+-ZEXTERN int ZEXPORT inflate OF((z_streamp strm, int flush));
++ZEXTERN int Q_ZEXPORT inflate OF((z_streamp strm, int flush));
+ /*
+     inflate decompresses as much data as possible, and stops when the input
+   buffer becomes empty or the output buffer becomes full. It may introduce
+@@ -459,7 +473,7 @@
+ */
+ 
+ 
+-ZEXTERN int ZEXPORT inflateEnd OF((z_streamp strm));
++ZEXTERN int Q_ZEXPORT inflateEnd OF((z_streamp strm));
+ /*
+      All dynamically allocated data structures for this stream are freed.
+    This function discards any unprocessed input and does not flush any
+@@ -535,7 +549,7 @@
+    not perform any compression: this will be done by deflate().
+ */
+ 
+-ZEXTERN int ZEXPORT deflateSetDictionary OF((z_streamp strm,
++ZEXTERN int Q_ZEXPORT deflateSetDictionary OF((z_streamp strm,
+                                              const Bytef *dictionary,
+                                              uInt  dictLength));
+ /*
+@@ -574,7 +588,7 @@
+    perform any compression: this will be done by deflate().
+ */
+ 
+-ZEXTERN int ZEXPORT deflateCopy OF((z_streamp dest,
++ZEXTERN int Q_ZEXPORT deflateCopy OF((z_streamp dest,
+                                     z_streamp source));
+ /*
+      Sets the destination stream as a complete copy of the source stream.
+@@ -592,7 +606,7 @@
+    destination.
+ */
+ 
+-ZEXTERN int ZEXPORT deflateReset OF((z_streamp strm));
++ZEXTERN int Q_ZEXPORT deflateReset OF((z_streamp strm));
+ /*
+      This function is equivalent to deflateEnd followed by deflateInit,
+    but does not free and reallocate all the internal compression state.
+@@ -603,7 +617,7 @@
+    stream state was inconsistent (such as zalloc or state being NULL).
+ */
+ 
+-ZEXTERN int ZEXPORT deflateParams OF((z_streamp strm,
++ZEXTERN int Q_ZEXPORT deflateParams OF((z_streamp strm,
+                                       int level,
+                                       int strategy));
+ /*
+@@ -733,7 +747,7 @@
+    and avail_out are unchanged.)
+ */
+ 
+-ZEXTERN int ZEXPORT inflateSetDictionary OF((z_streamp strm,
++ZEXTERN int Q_ZEXPORT inflateSetDictionary OF((z_streamp strm,
+                                              const Bytef *dictionary,
+                                              uInt  dictLength));
+ /*
+@@ -755,7 +769,7 @@
+    inflate().
+ */
+ 
+-ZEXTERN int ZEXPORT inflateSync OF((z_streamp strm));
++ZEXTERN int Q_ZEXPORT inflateSync OF((z_streamp strm));
+ /*
+     Skips invalid compressed data until a full flush point (see above the
+   description of deflate with Z_FULL_FLUSH) can be found, or until all
+@@ -786,7 +800,7 @@
+    destination.
+ */
+ 
+-ZEXTERN int ZEXPORT inflateReset OF((z_streamp strm));
++ZEXTERN int Q_ZEXPORT inflateReset OF((z_streamp strm));
+ /*
+      This function is equivalent to inflateEnd followed by inflateInit,
+    but does not free and reallocate all the internal decompression state.
+@@ -1006,7 +1020,7 @@
+    utility functions can easily be modified if you need special options.
+ */
+ 
+-ZEXTERN int ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
++ZEXTERN int Q_ZEXPORT compress OF((Bytef *dest,   uLongf *destLen,
+                                  const Bytef *source, uLong sourceLen));
+ /*
+      Compresses the source buffer into the destination buffer.  sourceLen is
+@@ -1021,7 +1035,7 @@
+    buffer.
+ */
+ 
+-ZEXTERN int ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
++ZEXTERN int Q_ZEXPORT compress2 OF((Bytef *dest,   uLongf *destLen,
+                                   const Bytef *source, uLong sourceLen,
+                                   int level));
+ /*
+@@ -1044,7 +1058,7 @@
+    a compress() or compress2() call to allocate the destination buffer.
+ */
+ 
+-ZEXTERN int ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
++ZEXTERN int Q_ZEXPORT uncompress OF((Bytef *dest,   uLongf *destLen,
+                                    const Bytef *source, uLong sourceLen));
+ /*
+      Decompresses the source buffer into the destination buffer.  sourceLen is
+@@ -1065,7 +1079,7 @@
+ 
+ typedef voidp gzFile;
+ 
+-ZEXTERN gzFile ZEXPORT gzopen  OF((const char *path, const char *mode));
++ZEXTERN gzFile Q_ZEXPORT gzopen  OF((const char *path, const char *mode));
+ /*
+      Opens a gzip (.gz) file for reading or writing. The mode parameter
+    is as in fopen ("rb" or "wb") but can also include a compression level
+@@ -1082,7 +1096,7 @@
+    can be checked to distinguish the two cases (if errno is zero, the
+    zlib error is Z_MEM_ERROR).  */
+ 
+-ZEXTERN gzFile ZEXPORT gzdopen  OF((int fd, const char *mode));
++ZEXTERN gzFile Q_ZEXPORT gzdopen  OF((int fd, const char *mode));
+ /*
+      gzdopen() associates a gzFile with the file descriptor fd.  File
+    descriptors are obtained from calls like open, dup, creat, pipe or
+@@ -1095,7 +1109,7 @@
+    the (de)compression state.
+ */
+ 
+-ZEXTERN int ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
++ZEXTERN int Q_ZEXPORT gzsetparams OF((gzFile file, int level, int strategy));
+ /*
+      Dynamically update the compression level or strategy. See the description
+    of deflateInit2 for the meaning of these parameters.
+@@ -1103,7 +1117,7 @@
+    opened for writing.
+ */
+ 
+-ZEXTERN int ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
++ZEXTERN int Q_ZEXPORT    gzread  OF((gzFile file, voidp buf, unsigned len));
+ /*
+      Reads the given number of uncompressed bytes from the compressed file.
+    If the input file was not in gzip format, gzread copies the given number
+@@ -1111,7 +1125,7 @@
+      gzread returns the number of uncompressed bytes actually read (0 for
+    end of file, -1 for error). */
+ 
+-ZEXTERN int ZEXPORT    gzwrite OF((gzFile file,
++ZEXTERN int Q_ZEXPORT    gzwrite OF((gzFile file,
+                                    voidpc buf, unsigned len));
+ /*
+      Writes the given number of uncompressed bytes into the compressed file.
+@@ -1119,7 +1133,7 @@
+    (0 in case of error).
+ */
+ 
+-ZEXTERN int ZEXPORTVA   gzprintf OF((gzFile file, const char *format, ...));
++ZEXTERN int Q_ZEXPORT gzprintf OF((gzFile file, const char *format, ...));
+ /*
+      Converts, formats, and writes the args to the compressed file under
+    control of the format string, as in fprintf. gzprintf returns the number of
+@@ -1132,14 +1146,14 @@
+    because the secure snprintf() or vsnprintf() functions were not available.
+ */
+ 
+-ZEXTERN int ZEXPORT gzputs OF((gzFile file, const char *s));
++ZEXTERN int Q_ZEXPORT gzputs OF((gzFile file, const char *s));
+ /*
+       Writes the given null-terminated string to the compressed file, excluding
+    the terminating null character.
+       gzputs returns the number of characters written, or -1 in case of error.
+ */
+ 
+-ZEXTERN char * ZEXPORT gzgets OF((gzFile file, char *buf, int len));
++ZEXTERN Q_ZEXPORT char * gzgets OF((gzFile file, char *buf, int len));
+ /*
+       Reads bytes from the compressed file until len-1 characters are read, or
+    a newline character is read and transferred to buf, or an end-of-file
+@@ -1148,13 +1162,13 @@
+       gzgets returns buf, or Z_NULL in case of error.
+ */
+ 
+-ZEXTERN int ZEXPORT    gzputc OF((gzFile file, int c));
++ZEXTERN int Q_ZEXPORT    gzputc OF((gzFile file, int c));
+ /*
+       Writes c, converted to an unsigned char, into the compressed file.
+    gzputc returns the value that was written, or -1 in case of error.
+ */
+ 
+-ZEXTERN int ZEXPORT    gzgetc OF((gzFile file));
++ZEXTERN int Q_ZEXPORT    gzgetc OF((gzFile file));
+ /*
+       Reads one byte from the compressed file. gzgetc returns this byte
+    or -1 in case of end of file or error.
+@@ -1170,7 +1184,7 @@
+    or gzrewind().
+ */
+ 
+-ZEXTERN int ZEXPORT    gzflush OF((gzFile file, int flush));
++ZEXTERN int Q_ZEXPORT    gzflush OF((gzFile file, int flush));
+ /*
+      Flushes all pending output into the compressed file. The parameter
+    flush is as in the deflate() function. The return value is the zlib
+@@ -1180,7 +1194,7 @@
+    degrade compression.
+ */
+ 
+-ZEXTERN z_off_t ZEXPORT    gzseek OF((gzFile file,
++ZEXTERN z_off_t Q_ZEXPORT    gzseek OF((gzFile file,
+                                       z_off_t offset, int whence));
+ /*
+       Sets the starting position for the next gzread or gzwrite on the
+@@ -1198,14 +1212,14 @@
+    would be before the current position.
+ */
+ 
+-ZEXTERN int ZEXPORT    gzrewind OF((gzFile file));
++ZEXTERN int Q_ZEXPORT    gzrewind OF((gzFile file));
+ /*
+      Rewinds the given file. This function is supported only for reading.
+ 
+    gzrewind(file) is equivalent to (int)gzseek(file, 0L, SEEK_SET)
+ */
+ 
+-ZEXTERN z_off_t ZEXPORT    gztell OF((gzFile file));
++ZEXTERN z_off_t Q_ZEXPORT    gztell OF((gzFile file));
+ /*
+      Returns the starting position for the next gzread or gzwrite on the
+    given compressed file. This position represents a number of bytes in the
+@@ -1214,7 +1228,7 @@
+    gztell(file) is equivalent to gzseek(file, 0L, SEEK_CUR)
+ */
+ 
+-ZEXTERN int ZEXPORT gzeof OF((gzFile file));
++ZEXTERN int Q_ZEXPORT gzeof OF((gzFile file));
+ /*
+      Returns 1 when EOF has previously been detected reading the given
+    input stream, otherwise zero.
+@@ -1226,14 +1240,14 @@
+    zero.
+ */
+ 
+-ZEXTERN int ZEXPORT    gzclose OF((gzFile file));
++ZEXTERN int Q_ZEXPORT    gzclose OF((gzFile file));
+ /*
+      Flushes all pending output if necessary, closes the compressed file
+    and deallocates all the (de)compression state. The return value is the zlib
+    error number (see function gzerror below).
+ */
+ 
+-ZEXTERN const char * ZEXPORT gzerror OF((gzFile file, int *errnum));
++ZEXTERN Q_ZEXPORT const char * gzerror OF((gzFile file, int *errnum));
+ /*
+      Returns the error message for the last error which occurred on the
+    given compressed file. errnum is set to zlib error number. If an
+@@ -1257,7 +1271,7 @@
+    compression library.
+ */
+ 
+-ZEXTERN uLong ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
++ZEXTERN uLong Q_ZEXPORT adler32 OF((uLong adler, const Bytef *buf, uInt len));
+ /*
+      Update a running Adler-32 checksum with the bytes buf[0..len-1] and
+    return the updated checksum. If buf is NULL, this function returns
+@@ -1282,7 +1296,7 @@
+    seq1 and seq2 concatenated, requiring only adler1, adler2, and len2.
+ */
+ 
+-ZEXTERN uLong ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
++ZEXTERN uLong Q_ZEXPORT crc32   OF((uLong crc, const Bytef *buf, uInt len));
+ /*
+      Update a running CRC-32 with the bytes buf[0..len-1] and return the
+    updated CRC-32. If buf is NULL, this function returns the required initial
+@@ -1314,15 +1328,15 @@
+ /* deflateInit and inflateInit are macros to allow checking the zlib version
+  * and the compiler's view of z_stream:
+  */
+-ZEXTERN int ZEXPORT deflateInit_ OF((z_streamp strm, int level,
++ZEXTERN int Q_ZEXPORT deflateInit_ OF((z_streamp strm, int level,
+                                      const char *version, int stream_size));
+-ZEXTERN int ZEXPORT inflateInit_ OF((z_streamp strm,
++ZEXTERN int Q_ZEXPORT inflateInit_ OF((z_streamp strm,
+                                      const char *version, int stream_size));
+-ZEXTERN int ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
++ZEXTERN int Q_ZEXPORT deflateInit2_ OF((z_streamp strm, int  level, int  method,
+                                       int windowBits, int memLevel,
+                                       int strategy, const char *version,
+                                       int stream_size));
+-ZEXTERN int ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
++ZEXTERN int Q_ZEXPORT inflateInit2_ OF((z_streamp strm, int  windowBits,
+                                       const char *version, int stream_size));
+ ZEXTERN int ZEXPORT inflateBackInit_ OF((z_streamp strm, int windowBits,
+                                          unsigned char FAR *window,
+@@ -1346,9 +1360,9 @@
+     struct internal_state {int dummy;}; /* hack for buggy compilers */
+ #endif
+ 
+-ZEXTERN const char   * ZEXPORT zError           OF((int));
+-ZEXTERN int            ZEXPORT inflateSyncPoint OF((z_streamp z));
+-ZEXTERN const uLongf * ZEXPORT get_crc_table    OF((void));
++ZEXTERN Q_ZEXPORT const char   * zError           OF((int));
++ZEXTERN int            Q_ZEXPORT inflateSyncPoint OF((z_streamp z));
++ZEXTERN Q_ZEXPORT const uLongf * get_crc_table    OF((void));
+ 
+ #ifdef __cplusplus
+ }