Merge branch '4.7' of git://scm.dev.nokia.troll.no/qt/qt into 4.7

Conflicts:
	tools/qml/qml.pri

10 files changed, 102 insertions, 132 deletions

diff --git a/src/declarative/util/qdeclarativeanimation.cpp b/src/declarative/util/qdeclarativeanimation.cpp
index 58c346c..ac9c3c0 100644
--- a/src/declarative/util/qdeclarativeanimation.cpp
+++ b/src/declarative/util/qdeclarativeanimation.cpp
@@ -674,7 +674,9 @@ QDeclarativeColorAnimation::~QDeclarativeColorAnimation()
 
     \qml
     Item {
-        states: [ ... ]
+        states: [
+            // States are defined here...
+        ]
 
         transition: Transition {
             NumberAnimation { from: "#c0c0c0"; duration: 2000 }
@@ -727,40 +729,29 @@ void QDeclarativeColorAnimation::setTo(const QColor &t)
 
 /*!
     \qmlclass ScriptAction QDeclarativeScriptAction
-  \ingroup qml-animation-transition
+    \ingroup qml-animation-transition
     \since 4.7
     \inherits Animation
     \brief The ScriptAction element allows scripts to be run during an animation.
 
-    ScriptAction can be used to run script at a specific point in an animation.
+    ScriptAction can be used to run a script at a specific point in an animation.
 
     \qml
     SequentialAnimation {
-        NumberAnimation { ... }
+        NumberAnimation {
+            // ...
+        }
         ScriptAction { script: doSomething(); }
-        NumberAnimation { ... }
+        NumberAnimation {
+            // ...
+        }
     }
     \endqml
 
     When used as part of a Transition, you can also target a specific
     StateChangeScript to run using the \c scriptName property.
 
-    \qml
-    State {
-        StateChangeScript {
-            name: "myScript"
-            script: doStateStuff();
-        }
-    }
-    ...
-    Transition {
-        SequentialAnimation {
-            NumberAnimation { ... }
-            ScriptAction { scriptName: "myScript" }
-            NumberAnimation { ... }
-        }
-    }
-    \endqml
+    \snippet doc/src/snippets/declarative/states/statechangescript.qml state and transition
 
     \sa StateChangeScript
 */
@@ -872,7 +863,7 @@ QAbstractAnimation *QDeclarativeScriptAction::qtAnimation()
 
 /*!
     \qmlclass PropertyAction QDeclarativePropertyAction
-  \ingroup qml-animation-transition
+    \ingroup qml-animation-transition
     \since 4.7
     \inherits Animation
     \brief The PropertyAction element allows immediate property changes during animation.
@@ -898,21 +889,14 @@ QAbstractAnimation *QDeclarativeScriptAction::qtAnimation()
     However, with this code, the \c transformOrigin is not set until \e after
     the animation, as a \l State is taken to define the values at the \e end of
     a transition. The animation would rotate at the default \c transformOrigin,
-    then jump to \c Item.BottomRight. To fix this, insert a PropertyChanges 
+    then jump to \c Item.BottomRight. To fix this, insert a PropertyAction
     before the RotationAnimation begins:
 
-    \qml
-    transitions: Transition {
-        SequentialAnimation {
-            PropertyAction { target: rect; property: "transformOrigin" }
-            RotationAnimation { ... }
-        }
-    }
-    \endqml
+    \snippet doc/src/snippets/declarative/propertyaction-sequential.qml sequential
     
     This immediately sets the \c transformOrigin property to the value defined
     in the end state of the \l Transition (i.e. the value defined in the 
-    PropertyChanges object) so that the rotation animation begins with the
+    PropertyAction object) so that the rotation animation begins with the
     correct transform origin.
 
     \sa {QML Animation}, QtDeclarative
@@ -1197,7 +1181,9 @@ void QDeclarativeNumberAnimation::init()
 
     \qml
     Item {
-        states: [ ... ]
+        states: [
+            // ...
+        ]
 
         transition: Transition {
             NumberAnimation { properties: "x"; from: 100; duration: 200 }
@@ -1423,7 +1409,9 @@ QDeclarativeRotationAnimation::~QDeclarativeRotationAnimation()
 
     \qml
     Item {
-        states: [ ... ]
+        states: [
+            // ...
+        ]
 
         transition: Transition {
             RotationAnimation { properties: "angle"; from: 100; duration: 2000 }
@@ -2255,7 +2243,7 @@ void QDeclarativePropertyAnimation::setProperties(const QString &prop)
            width: 100; height: 100
            color: Qt.rgba(0,0,1)
            //need to explicitly specify target and property
-           NumberAnimation { id: theAnim; target: theRect; property: "x" to: 500 }
+           NumberAnimation { id: theAnim; target: theRect; property: "x"; to: 500 }
            MouseArea {
                anchors.fill: parent
                onClicked: theAnim.start()
@@ -2557,7 +2545,7 @@ void QDeclarativeParentAnimation::setNewParent(QDeclarativeItem *newParent)
     ParentAnimation {
         target: myItem
         via: topLevelItem
-        ...
+        // ...
     }
     \endqml
 */
diff --git a/src/declarative/util/qdeclarativeconnections.cpp b/src/declarative/util/qdeclarativeconnections.cpp
index 6d3ddeb..5a66aab 100644
--- a/src/declarative/util/qdeclarativeconnections.cpp
+++ b/src/declarative/util/qdeclarativeconnections.cpp
@@ -72,8 +72,8 @@ public:
 
 /*!
     \qmlclass Connections QDeclarativeConnections
-  \ingroup qml-utility-elements
-  \since 4.7
+    \ingroup qml-utility-elements
+    \since 4.7
     \brief A Connections element describes generalized connections to signals.
 
     A Connections object creates a connection to a QML signal.
@@ -83,7 +83,7 @@ public:
 
     \qml
     MouseArea {
-        onClicked: { foo(...) }
+        onClicked: { foo(parameters) }
     }
     \endqml
 
@@ -104,7 +104,7 @@ public:
     \qml
     MouseArea {
         Connections {
-            onClicked: foo(...)
+            onClicked: foo(parameters)
         }
     }
     \endqml
@@ -116,10 +116,10 @@ public:
     MouseArea {
         id: area
     }
-    ...
+    // ...
     Connections {
         target: area
-        onClicked: foo(...)
+        onClicked: foo(parameters)
     }
     \endqml
 
diff --git a/src/declarative/util/qdeclarativefontloader.cpp b/src/declarative/util/qdeclarativefontloader.cpp
index d39da3f..eba9cf9 100644
--- a/src/declarative/util/qdeclarativefontloader.cpp
+++ b/src/declarative/util/qdeclarativefontloader.cpp
@@ -262,8 +262,18 @@ void QDeclarativeFontLoader::updateFontInfo(const QString& name, QDeclarativeFon
 
     Example:
     \qml
-    FontLoader { id: webFont; source: "http://www.mysite.com/myfont.ttf" }
-    Text { text: "Fancy font"; font.family: webFont.name }
+    Item {
+        width: 200; height: 50
+
+        FontLoader {
+            id: webFont
+            source: "http://www.mysite.com/myfont.ttf"
+        }
+        Text {
+            text: "Fancy font"
+            font.family: webFont.name
+        }
+    }
     \endqml
 */
 QString QDeclarativeFontLoader::name() const
diff --git a/src/declarative/util/qdeclarativelistmodel.cpp b/src/declarative/util/qdeclarativelistmodel.cpp
index a0c3a74..9332de4 100644
--- a/src/declarative/util/qdeclarativelistmodel.cpp
+++ b/src/declarative/util/qdeclarativelistmodel.cpp
@@ -108,9 +108,9 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM
     The following example shows a ListModel containing three elements, with the roles
     "name" and "cost".
 
-    \beginfloatright
+    \div {float-right}
     \inlineimage listmodel.png
-    \endfloat
+    \enddiv
 
     \snippet doc/src/snippets/declarative/listmodel.qml 0
 
@@ -133,9 +133,9 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM
 
     The delegate displays all the fruit attributes:
 
-    \beginfloatright
+    \div {float-right}
     \inlineimage listmodel-nested.png
-    \endfloat
+    \enddiv
 
     \snippet doc/src/snippets/declarative/listmodel-nested.qml delegate
 
diff --git a/src/declarative/util/qdeclarativepropertychanges.cpp b/src/declarative/util/qdeclarativepropertychanges.cpp
index ccd122e..9bcb263 100644
--- a/src/declarative/util/qdeclarativepropertychanges.cpp
+++ b/src/declarative/util/qdeclarativepropertychanges.cpp
@@ -281,7 +281,7 @@ QDeclarativePropertyChangesParser::compile(const QList<QDeclarativeCustomParserP
         QDeclarativeParser::Variant v = qvariant_cast<QDeclarativeParser::Variant>(data.at(ii).second);
         QVariant var;
         bool isScript = v.isScript();
-        QDeclarativeBinding::Identifier id;
+        QDeclarativeBinding::Identifier id = 0;
         switch(v.type()) {
         case QDeclarativeParser::Variant::Boolean:
             var = QVariant(v.asBoolean());
diff --git a/src/declarative/util/qdeclarativestate.cpp b/src/declarative/util/qdeclarativestate.cpp
index cde9a72..5a4e2b1 100644
--- a/src/declarative/util/qdeclarativestate.cpp
+++ b/src/declarative/util/qdeclarativestate.cpp
@@ -216,15 +216,18 @@ bool QDeclarativeState::isWhenKnown() const
 
     \snippet doc/src/snippets/declarative/state-when.qml 0
 
-    If multiple states in a group have \c when clauses that evaluate to \c true at the same time,
-    the first matching state will be applied. For example, in the following snippet
-    \c state1 will always be selected rather than \c state2 when sharedCondition becomes
-    \c true.
+    If multiple states in a group have \c when clauses that evaluate to \c true
+    at the same time, the first matching state will be applied. For example, in
+    the following snippet \c state1 will always be selected rather than
+    \c state2 when sharedCondition becomes \c true.
     \qml
-    states: [
-        State { name: "state1"; when: sharedCondition },
-        State { name: "state2"; when: sharedCondition }
-    ]
+    Item {
+        states: [
+            State { name: "state1"; when: sharedCondition },
+            State { name: "state2"; when: sharedCondition }
+        ]
+        // ...
+    }
     \endqml
 */
 QDeclarativeBinding *QDeclarativeState::when() const
diff --git a/src/declarative/util/qdeclarativestategroup.cpp b/src/declarative/util/qdeclarativestategroup.cpp
index 7aeea12..f1d0997 100644
--- a/src/declarative/util/qdeclarativestategroup.cpp
+++ b/src/declarative/util/qdeclarativestategroup.cpp
@@ -102,10 +102,10 @@ public:
            id: myStateGroup
            states: State {
                name: "state1"
-               ...
+               // ...
            }
            transitions: Transition {
-               ...
+               // ...
            }
        }
 
@@ -140,11 +140,15 @@ QList<QDeclarativeState *> QDeclarativeStateGroup::states() const
 
   \qml
   StateGroup {
-    states: [
-      State { ... },
-      State { ... }
-      ...
-    ]
+      states: [
+          State {
+              // State definition...
+          },
+          State {
+              // ...
+          }
+          // Other states...
+      ]
   }
   \endqml
 
@@ -197,11 +201,15 @@ void QDeclarativeStateGroupPrivate::clear_states(QDeclarativeListProperty<QDecla
 
   \qml
   StateGroup {
-    transitions: [
-      Transition { ... },
-      Transition { ... }
-      ...
-    ]
+      transitions: [
+          Transition {
+            // ...
+          },
+          Transition {
+            // ...
+          }
+          // ...
+      ]
   }
   \endqml
 
@@ -221,14 +229,14 @@ QDeclarativeListProperty<QDeclarativeTransition> QDeclarativeStateGroup::transit
   This property is often used in scripts to change between states. For
   example:
 
-  \qml
-    function toggle() {
-        if (button.state == 'On')
-            button.state = 'Off';
-        else
-            button.state = 'On';
-    }
-  \endqml
+  \js
+  function toggle() {
+      if (button.state == 'On')
+          button.state = 'Off';
+      else
+          button.state = 'On';
+  }
+  \endjs
 
   If the state group is in its base state (i.e. no explicit state has been
   set), \c state will be a blank string. Likewise, you can return a
diff --git a/src/declarative/util/qdeclarativestateoperations.cpp b/src/declarative/util/qdeclarativestateoperations.cpp
index 148211a..9aca71f 100644
--- a/src/declarative/util/qdeclarativestateoperations.cpp
+++ b/src/declarative/util/qdeclarativestateoperations.cpp
@@ -606,25 +606,7 @@ public:
     ScriptAction to specify the point in the transition at which
     the StateChangeScript should to be run.
 
-    \qml
-    State {
-        name "state1"
-        StateChangeScript {
-            name: "myScript"
-            script: doStateStuff();
-        }
-        ...
-    }
-    ...
-    Transition {
-        to: "state1"
-        SequentialAnimation {
-            NumberAnimation { ... }
-            ScriptAction { scriptName: "myScript" }
-            NumberAnimation { ... }
-        }
-    }
-    \endqml
+    \snippet snippets/declarative/states/statechangescript.qml state and transition
 
     \sa ScriptAction
 */
@@ -659,7 +641,7 @@ void QDeclarativeStateChangeScript::setScript(const QDeclarativeScriptString &s)
     This property holds the name of the script. This name can be used by a
     ScriptAction to target a specific script.
 
-    \sa ScriptAction::stateChangeScriptName
+    \sa ScriptAction::scriptName
 */
 QString QDeclarativeStateChangeScript::name() const
 {
diff --git a/src/declarative/util/qdeclarativetransition.cpp b/src/declarative/util/qdeclarativetransition.cpp
index e533a07..063ec3e 100644
--- a/src/declarative/util/qdeclarativetransition.cpp
+++ b/src/declarative/util/qdeclarativetransition.cpp
@@ -82,15 +82,7 @@ QT_BEGIN_NAMESPACE
 
     To define multiple transitions, specify \l Item::transitions as a list:
 
-    \qml
-    Item {
-        ...
-        transitions: [
-            Transition { to: "state1" ... },
-            Transition { ... }
-        ]
-    }
-    \endqml
+    \snippet doc/src/snippets/declarative/transitions-list.qml list of transitions
 
     If multiple Transitions are specified, only a single (best-matching) Transition will be applied for any particular
     state change. In the example above, when changing to \c state1, the first transition will be used, rather
@@ -222,13 +214,7 @@ void QDeclarativeTransition::prepare(QDeclarativeStateOperation::ActionList &act
 
     If the transition was changed to this:
 
-    \qml
-        transitions: Transition { 
-            to: "brighter"
-            ColorAnimation { duration: 1000 }
-        }
-    }
-    \endqml
+    \snippet doc/src/snippets/declarative/transition-from-to-modified.qml modified transition
 
     The animation would only be applied when changing from the default state to
     the "brighter" state (i.e. when the mouse is pressed, but not on release).
@@ -313,24 +299,12 @@ void QDeclarativeTransition::setToState(const QString &t)
 
     This property holds a list of the animations to be run for this transition.
 
-    \qml
-    Transition {
-        PropertyAnimation { ... }
-        NumberAnimation { ... }
-    }
-    \endqml
+    \snippet examples/declarative/toys/dynamicscene/dynamicscene.qml top-level transitions
 
     The top-level animations are run in parallel. To run them sequentially,
     define them within a SequentialAnimation:
 
-    \qml
-    Transition {
-        SequentialAnimation {
-            PropertyAnimation { ... }
-            NumberAnimation { ... }
-        }
-    }
-    \endqml
+    \snippet doc/src/snippets/declarative/transition-reversible.qml sequential animations
 */
 QDeclarativeListProperty<QDeclarativeAbstractAnimation> QDeclarativeTransition::animations()
 {
diff --git a/src/declarative/util/qdeclarativexmllistmodel.cpp b/src/declarative/util/qdeclarativexmllistmodel.cpp
index 5ed10cf..5af53e6 100644
--- a/src/declarative/util/qdeclarativexmllistmodel.cpp
+++ b/src/declarative/util/qdeclarativexmllistmodel.cpp
@@ -89,10 +89,15 @@ typedef QPair<int, int> QDeclarativeXmlListRange;
     \qml
     XmlListModel {
         id: xmlModel
-        ...
-        XmlRole { name: "title"; query: "title/string()" }
+        // ...
+        XmlRole {
+            name: "title"
+            query: "title/string()"
+        }
     }
+    \endqml
 
+    \qml
     ListView {
         model: xmlModel
         delegate: Text { text: title }
@@ -782,9 +787,9 @@ void QDeclarativeXmlListModel::setNamespaceDeclarations(const QString &declarati
 
     This will access the \c title value for the first item in the model:
 
-    \qml
-        var title = model.get(0).title;
-    \endqml
+    \js
+    var title = model.get(0).title;
+    \endjs
 */
 QScriptValue QDeclarativeXmlListModel::get(int index) const
 {