Merge branch '4.5' of git@scm.dev.nokia.troll.no:qt/qt

8 files changed, 974 insertions, 1010 deletions

diff --git a/src/gui/graphicsview/qgraphicslayoutitem.cpp b/src/gui/graphicsview/qgraphicslayoutitem.cpp
index 0ea7692..eaa97ff 100644
--- a/src/gui/graphicsview/qgraphicslayoutitem.cpp
+++ b/src/gui/graphicsview/qgraphicslayoutitem.cpp
@@ -117,7 +117,7 @@ QGraphicsLayoutItemPrivate::QGraphicsLayoutItemPrivate(QGraphicsLayoutItem *par,
 */
 void QGraphicsLayoutItemPrivate::init()
 {
-    sizeHintCacheDirty = true; 
+    sizeHintCacheDirty = true;
     sizePolicy = QSizePolicy(QSizePolicy::Preferred, QSizePolicy::Preferred);
 }
 
@@ -175,12 +175,12 @@ QSizeF *QGraphicsLayoutItemPrivate::effectiveSizeHints(const QSizeF &constraint)
 
     Returns the parent item of this layout, or 0 if this layout is
     not installed on any widget.
-    
+
     If this is the item that the layout is installed on, it will return "itself".
 
     If the layout is a sub-layout, this function returns the parent
     widget of the parent layout.
-    
+
     Note that it will traverse up the layout item hierarchy instead of just calling
     QGraphicsItem::parentItem(). This is on purpose.
 
@@ -233,7 +233,7 @@ QGraphicsItem *QGraphicsLayoutItemPrivate::parentItem() const
     position. Calling setGeometry() will always resize and reposition the item
     immediately. Normally, this function is called by QGraphicsLayout after
     the layout has been activated, but it can also be called by the item's user
-    at any time. 
+    at any time.
 
     The sizeHint() function returns the item' minimum, preferred and maximum
     size hints. You can override these properties by calling setMinimumSize(),
@@ -360,7 +360,7 @@ void QGraphicsLayoutItem::setSizePolicy(QSizePolicy::Policy hPolicy,
 }
 
 /*!
-    Returns the current size policy. 
+    Returns the current size policy.
 
     \sa setSizePolicy(), QWidget::sizePolicy()
 */
@@ -626,14 +626,15 @@ void QGraphicsLayoutItem::setMaximumHeight(qreal height)
 */
 
 /*!
-    \fn virtual void QGraphicsLayoutItem::setGeometry(const QRectF &rect) = 0
+    \fn virtual void QGraphicsLayoutItem::setGeometry(const QRectF &rect)
 
-    This pure virtual function sets the geometry of the QGraphicsLayoutItem to
+    This virtual function sets the geometry of the QGraphicsLayoutItem to
     \a rect, which is in parent coordinates (e.g., the top-left corner of \a rect
     is equivalent to the item's position in parent coordinates).
 
-    Reimplement this function in a subclass of QGraphicsLayoutItem to enable
-    your item to receive geometry updates.
+    You must reimplement this function in a subclass of QGraphicsLayoutItem to
+    receive geometry updates. The layout will call this function when it does a 
+    rearrangement.
 
     If \a rect is outside of the bounds of minimumSize and maximumSize, it
     will be adjusted to its closest size so that it is within the legal
@@ -744,7 +745,7 @@ QSizeF QGraphicsLayoutItem::effectiveSizeHint(Qt::SizeHint which, const QSizeF &
     \sa effectiveSizeHint()
 */
 void QGraphicsLayoutItem::updateGeometry()
-{ 
+{
     Q_D(QGraphicsLayoutItem);
     d->sizeHintCacheDirty = true;
 }
@@ -768,7 +769,7 @@ QGraphicsLayoutItem *QGraphicsLayoutItem::parentLayoutItem() const
     \sa parentLayoutItem()
 */
 void QGraphicsLayoutItem::setParentLayoutItem(QGraphicsLayoutItem *parent)
-{ 
+{
     d_func()->parent = parent;
 }
 
@@ -789,12 +790,12 @@ bool QGraphicsLayoutItem::isLayout() const
     If its true, then the layout will delete it. If its false, then it is
     assumed that another object has the ownership of it, and the layout won't
     delete this item.
-    
-    If the item inherits both QGraphicsItem and QGraphicsLayoutItem (such 
-    as QGraphicsWidget does) the item is really part of two ownership 
+
+    If the item inherits both QGraphicsItem and QGraphicsLayoutItem (such
+    as QGraphicsWidget does) the item is really part of two ownership
     hierarchies. This property informs what the layout should do with its
     child items when it is destructed. In the case of QGraphicsWidget, it
-    is preferred that when the layout is deleted it won't delete its children 
+    is preferred that when the layout is deleted it won't delete its children
     (since they are also part of the graphics item hierarchy).
 
     By default this value is initialized to false in QGraphicsLayoutItem,
@@ -822,9 +823,9 @@ void QGraphicsLayoutItem::setOwnedByLayout(bool ownership)
 
 /*!
  * Returns the QGraphicsItem that this layout item represents.
- * For QGraphicsWidget it will return itself. For custom items it can return an 
- * aggregated value. 
- * 
+ * For QGraphicsWidget it will return itself. For custom items it can return an
+ * aggregated value.
+ *
  * \sa setGraphicsItem()
  */
 QGraphicsItem *QGraphicsLayoutItem::graphicsItem() const
@@ -836,10 +837,10 @@ QGraphicsItem *QGraphicsLayoutItem::graphicsItem() const
  * If the QGraphicsLayoutItem represents a QGraphicsItem, and it wants to take
  * advantage of the automatic reparenting capabilities of QGraphicsLayout it
  * should set this value.
- * Note that if you delete \a item and not delete the layout item, you are 
- * responsible of calling setGraphicsItem(0) in order to avoid having a 
+ * Note that if you delete \a item and not delete the layout item, you are
+ * responsible of calling setGraphicsItem(0) in order to avoid having a
  * dangling pointer.
- * 
+ *
  * \sa graphicsItem()
  */
 void QGraphicsLayoutItem::setGraphicsItem(QGraphicsItem *item)
@@ -848,5 +849,5 @@ void QGraphicsLayoutItem::setGraphicsItem(QGraphicsItem *item)
 }
 
 QT_END_NAMESPACE
-        
+
 #endif //QT_NO_GRAPHICSVIEW
diff --git a/src/gui/kernel/qapplication.cpp b/src/gui/kernel/qapplication.cpp
index 7e59fad..c4224ed 100644
--- a/src/gui/kernel/qapplication.cpp
+++ b/src/gui/kernel/qapplication.cpp
@@ -169,189 +169,174 @@ QApplicationPrivate::~QApplicationPrivate()
 }
 
 /*!
-  \class QApplication
-  \brief The QApplication class manages the GUI application's control
-  flow and main settings.
-
-  \ingroup application
-  \mainclass
-
-  It contains the main event loop, where all events from the window
-  system and other sources are processed and dispatched. It also
-  handles the application's initialization and finalization, and
-  provides session management. It also handles most system-wide and
-  application-wide settings.
-
-  For any GUI application that uses Qt, there is precisely one
-  QApplication object, no matter whether the application has 0, 1, 2
-  or more windows at any time. For non-GUI Qt applications, use
-  QCoreApplication instead, which doesn't depend on the \l QtGui
-  library.
-
-  The QApplication object is accessible through the instance()
-  function which return a pointer equivalent to the global qApp
-  pointer.
-
-  QApplication's main areas of responsibility are:
-  \list
-
-  \o It initializes the application with the user's desktop settings
-  such as palette(), font() and doubleClickInterval(). It keeps track
-  of these properties in case the user changes the desktop globally, for
-  example through some kind of control panel.
-
-  \o It performs event handling, meaning that it receives events
-  from the underlying window system and dispatches them to the relevant
-  widgets. By using sendEvent() and postEvent() you can send your own
-  events to widgets.
-
-  \o It parses common command line arguments and sets its internal
-  state accordingly. See the \link QApplication::QApplication()
-  constructor documentation\endlink below for more details about this.
-
-  \o It defines the application's look and feel, which is
-  encapsulated in a QStyle object. This can be changed at runtime
-  with setStyle().
-
-  \o It specifies how the application is to allocate colors.
-  See setColorSpec() for details.
-
-  \o It provides localization of strings that are visible to the user
-  via translate().
-
-  \o It provides some magical objects like the desktop() and the
-  clipboard().
-
-  \o It knows about the application's windows. You can ask which
-  widget is at a certain position using widgetAt(), get a list of
-  topLevelWidgets() and closeAllWindows(), etc.
-
-  \o It manages the application's mouse cursor handling,
-  see setOverrideCursor()
-
-  \o On the X window system, it provides functions to flush and sync
-  the communication stream, see flushX() and syncX().
-
-  \o It provides support for sophisticated \link
-  session.html session management \endlink. This makes it possible
-  for applications to terminate gracefully when the user logs out, to
-  cancel a shutdown process if termination isn't possible and even to
-  preserve the entire application's state for a future session. See
-  isSessionRestored(), sessionId() and commitData() and saveState()
-  for details.
-
-  \endlist
-
-  Since the QApplication object does so much initialization, it
-  \e{must} be created before any other objects related to the user
-  interface are created.
-
-  Since it also deals with common command line arguments, it is
-  usually a good idea to create it \e before any interpretation or
-  modification of \c argv is done in the application itself.
-
-  \table
-    \header \o{2,1} Groups of functions
-    \row
-     \o System settings
-     \o
-        desktopSettingsAware(),
-        setDesktopSettingsAware(),
-        cursorFlashTime(),
-        setCursorFlashTime(),
-        doubleClickInterval(),
-        setDoubleClickInterval(),
-        setKeyboardInputInterval(),
-        wheelScrollLines(),
-        setWheelScrollLines(),
-        palette(),
-        setPalette(),
-        font(),
-        setFont(),
-        fontMetrics().
-
-    \row
-     \o Event handling
-     \o
-        exec(),
-        processEvents(),
-        exit(),
-        quit().
-        sendEvent(),
-        postEvent(),
-        sendPostedEvents(),
-        removePostedEvents(),
-        hasPendingEvents(),
-        notify(),
-        macEventFilter(),
-        qwsEventFilter(),
-        x11EventFilter(),
-        x11ProcessEvent(),
-        winEventFilter().
-
-    \row
-     \o GUI Styles
-     \o
-        style(),
-        setStyle().
-
-    \row
-     \o Color usage
-     \o
-        colorSpec(),
-        setColorSpec(),
-        qwsSetCustomColors().
-
-    \row
-     \o Text handling
-     \o
-        installTranslator(),
-        removeTranslator()
-        translate().
-
-    \row
-     \o Widgets
-     \o
-        allWidgets(),
-        topLevelWidgets(),
-        desktop(),
-        activePopupWidget(),
-        activeModalWidget(),
-        clipboard(),
-        focusWidget(),
-        winFocus(),
-        activeWindow(),
-        widgetAt().
-
-    \row
-     \o Advanced cursor handling
-     \o
-        overrideCursor(),
-        setOverrideCursor(),
-        restoreOverrideCursor().
-
-    \row
-     \o X Window System synchronization
-     \o
-        flushX(),
-        syncX().
-
-    \row
-     \o Session management
-     \o
-        isSessionRestored(),
-        sessionId(),
-        commitData(),
-        saveState().
-
-    \row
-     \o Miscellaneous
-     \o
-        closeAllWindows(),
-        startingUp(),
-        closingDown(),
-        type().
-  \endtable
+    \class QApplication
+    \brief The QApplication class manages the GUI application's control
+    flow and main settings.
+
+    \ingroup application
+    \mainclass
+
+    QApplication contains the main event loop, where all events from the window
+    system and other sources are processed and dispatched. It also handles the
+    application's initialization and finalization, and provides session
+    management. In addition, it handles most system-wide and application-wide
+    settings.
+
+    For any GUI application using Qt, there is precisely one QApplication
+    object, no matter whether the application has 0, 1, 2 or more windows at
+    any given time. For non-GUI Qt applications, use QCoreApplication instead,
+    as it does not depend on the \l QtGui library.
+
+    The QApplication object is accessible through the instance() function that
+    returns a pointer equivalent to the global qApp pointer.
+
+    QApplication's main areas of responsibility are:
+        \list
+            \o  It initializes the application with the user's desktop settings
+                such as palette(), font() and doubleClickInterval(). It keeps
+                track of these properties in case the user changes the desktop
+                globally, for example through some kind of control panel.
+
+            \o  It performs event handling, meaning that it receives events
+                from the underlying window system and dispatches them to the
+                relevant widgets. By using sendEvent() and postEvent() you can
+                send your own events to widgets.
+
+            \o  It parses common command line arguments and sets its internal
+                state accordingly. See the \l{QApplication::QApplication()}
+                {constructor documentation} below for more details.
+
+            \o  It defines the application's look and feel, which is
+                encapsulated in a QStyle object. This can be changed at runtime
+                with setStyle().
+
+            \o  It specifies how the application is to allocate colors. See
+                setColorSpec() for details.
+
+            \o  It provides localization of strings that are visible to the
+                user via translate().
+
+            \o  It provides some magical objects like the desktop() and the
+                clipboard().
+
+            \o  It knows about the application's windows. You can ask which
+                widget is at a certain position using widgetAt(), get a list of
+                topLevelWidgets() and closeAllWindows(), etc.
+
+            \o  It manages the application's mouse cursor handling, see
+                setOverrideCursor()
+
+            \o  On the X window system, it provides functions to flush and sync
+                the communication stream, see flushX() and syncX().
+
+            \o  It provides support for sophisticated \l{Session Management}
+                {session management}. This makes it possible for applications
+                to terminate gracefully when the user logs out, to cancel a
+                shutdown process if termination isn't possible and even to
+                preserve the entire application's state for a future session.
+                See isSessionRestored(), sessionId() and commitData() and
+                saveState() for details.
+        \endlist
+
+    The QApplication object does so much initialization. Hence, it \e{must} be
+    created before any other objects related to the user interface are created.
+    Since QApplication also deals with common command line arguments, it is
+    usually a good idea to create it \e before any interpretation or
+    modification of \c argv is done in the application itself.
+
+    \table
+    \header
+        \o{2,1} Groups of functions
+
+        \row
+        \o  System settings
+        \o  desktopSettingsAware(),
+            setDesktopSettingsAware(),
+            cursorFlashTime(),
+            setCursorFlashTime(),
+            doubleClickInterval(),
+            setDoubleClickInterval(),
+            setKeyboardInputInterval(),
+            wheelScrollLines(),
+            setWheelScrollLines(),
+            palette(),
+            setPalette(),
+            font(),
+            setFont(),
+            fontMetrics().
+
+        \row
+        \o  Event handling
+        \o  exec(),
+            processEvents(),
+            exit(),
+            quit().
+            sendEvent(),
+            postEvent(),
+            sendPostedEvents(),
+            removePostedEvents(),
+            hasPendingEvents(),
+            notify(),
+            macEventFilter(),
+            qwsEventFilter(),
+            x11EventFilter(),
+            x11ProcessEvent(),
+            winEventFilter().
+
+        \row
+        \o  GUI Styles
+        \o  style(),
+            setStyle().
+
+        \row
+        \o  Color usage
+        \o  colorSpec(),
+            setColorSpec(),
+            qwsSetCustomColors().
+
+        \row
+        \o  Text handling
+        \o  installTranslator(),
+            removeTranslator()
+            translate().
+
+        \row
+        \o  Widgets
+        \o  allWidgets(),
+            topLevelWidgets(),
+            desktop(),
+            activePopupWidget(),
+            activeModalWidget(),
+            clipboard(),
+            focusWidget(),
+            activeWindow(),
+            widgetAt().
+
+        \row
+        \o  Advanced cursor handling
+        \o  overrideCursor(),
+            setOverrideCursor(),
+            restoreOverrideCursor().
+
+        \row
+        \o  X Window System synchronization
+        \o  flushX(),
+            syncX().
+
+        \row
+        \o  Session management
+        \o  isSessionRestored(),
+            sessionId(),
+            commitData(),
+            saveState().
+
+        \row
+        \o  Miscellaneous
+        \o  closeAllWindows(),
+            startingUp(),
+            closingDown(),
+            type().
+    \endtable
 
     \sa QCoreApplication, QAbstractEventDispatcher, QEventLoop, QSettings
 */
@@ -382,6 +367,7 @@ QApplicationPrivate::~QApplicationPrivate()
     Returns the top-level widget at the given \a point; returns 0 if
     there is no such widget.
 */
+
 /*!
     \fn QWidget *QApplication::topLevelAt(int x, int y)
 
@@ -393,8 +379,8 @@ QApplicationPrivate::~QApplicationPrivate()
 
 
 /*
-  The qt_init() and qt_cleanup() functions are implemented in the
-  qapplication_xyz.cpp file.
+    The qt_init() and qt_cleanup() functions are implemented in the
+    qapplication_xyz.cpp file.
 */
 
 void qt_init(QApplicationPrivate *priv, int type
@@ -580,99 +566,100 @@ void QApplicationPrivate::process_cmdline()
 }
 
 /*!
-  Initializes the window system and constructs an application object
-  with \a argc command line arguments in \a argv.
-
-  \warning The data referred to by \a argc and \a argv must stay valid
-  for the entire lifetime of the QApplication object. In addition,
-  \a argc must be greater than zero and \a argv must contain at least
-  one valid character string.
-
-  The global \c qApp pointer refers to this application object. Only
-  one application object should be created.
-
-  This application object must be constructed before any \link
-  QPaintDevice paint devices\endlink (including widgets, pixmaps, bitmaps
-  etc.).
-
-  Note that \a argc and \a argv might be changed. Qt removes command
-  line arguments that it recognizes.
-
-  Qt debugging options (not available if Qt was compiled without the
-  QT_DEBUG flag defined):
-  \list
-  \o -nograb, tells Qt that it must never grab the mouse or the keyboard.
-  \o -dograb (only under X11), running under a debugger can cause
-  an implicit -nograb, use -dograb to override.
-  \o -sync (only under X11), switches to synchronous mode for
-        debugging.
-  \endlist
-
-  See \link debug.html Debugging Techniques \endlink for a more
-  detailed explanation.
-
-  All Qt programs automatically support the following command line options:
-  \list
-  \o -style= \e style, sets the application GUI style. Possible values
-       are \c motif, \c windows, and \c platinum. If you compiled Qt
-       with additional styles or have additional styles as plugins these
-       will be available to the \c -style command line option.
-  \o -style \e style, is the same as listed above.
-  \o -stylesheet= \e stylesheet, sets the application \l styleSheet. The value
-       must be a path to a file that contains the Style Sheet. Note that relative URLs
-       in the Style Sheet file are relative to the Style Sheet file's path.
-  \o -stylesheet \e stylesheet, is the same as listed above.
-  \o -session= \e session, restores the application from an earlier
-       \link session.html session \endlink.
-  \o -session \e session, is the same as listed above.
-  \o -widgetcount, prints debug message at the end about number of widgets left
-        undestroyed and maximum number of widgets existed at the same time
-  \o -reverse, sets the application's layout direction to Qt::RightToLeft
-  \o -graphicssystem, sets the backend to be used for on-screen
-      widgets and QPixmaps. Available options are \c{raster} and \c{opengl}.
-
-  \endlist
-
-  The Windows version of Qt also support one additional command line
-  option, if Direct3D support has been compiled into Qt:
-  \list
-  \o -direct3d will make the Direct3D paint engine the default widget
-               paint engine in Qt. \bold {This functionality is experimental.}
-  \endlist
-
-  The X11 version of Qt also supports some traditional X11
-  command line options:
-  \list
-  \o -display \e display, sets the X display (default is $DISPLAY).
-  \o -geometry \e geometry, sets the client geometry of the
-        first window that is shown.
-  \o -fn or \c -font \e font, defines the application font. The
-  font should be specified using an X logical font description.
-  \o -bg or \c -background \e color, sets the default background color
-        and an application palette (light and dark shades are calculated).
-  \o -fg or \c -foreground \e color, sets the default foreground color.
-  \o -btn or \c -button \e color, sets the default button color.
-  \o -name \e name, sets the application name.
-  \o -title \e title, sets the application title.
-  \o -visual \c TrueColor, forces the application to use a TrueColor visual
-       on an 8-bit display.
-  \o -ncols \e count, limits the number of colors allocated in the
-       color cube on an 8-bit display, if the application is using the
-       QApplication::ManyColor color specification. If \e count is
-       216 then a 6x6x6 color cube is used (i.e. 6 levels of red, 6 of green,
-       and 6 of blue); for other values, a cube
-       approximately proportional to a 2x3x1 cube is used.
-  \o -cmap, causes the application to install a private color map
-       on an 8-bit display.
-  \o -im, sets the input method server (equivalent to setting the XMODIFIERS
-       environment variable)
-  \o -inputstyle, defines how the input is inserted into the given widget. E.g.,
-       \c onTheSpot makes the input appear directly in the widget, while
-       \c overTheSpot makes the input appear in a box floating over the
-       widget and is not inserted until the editing is done.
-  \endlist
-
-  \sa arguments()
+    Initializes the window system and constructs an application object with
+    \a argc command line arguments in \a argv.
+
+    \warning The data referred to by \a argc and \a argv must stay valid for
+    the entire lifetime of the QApplication object. In addition, \a argc must
+    be greater than zero and \a argv must contain at least one valid character
+    string.
+
+    The global \c qApp pointer refers to this application object. Only one
+    application object should be created.
+
+    This application object must be constructed before any \l{QPaintDevice}
+    {paint devices} (including widgets, pixmaps, bitmaps etc.).
+
+    \note \a argc and \a argv might be changed as Qt removes command line
+    arguments that it recognizes.
+
+    Qt debugging options (not available if Qt was compiled without the QT_DEBUG
+    flag defined):
+    \list
+        \o  -nograb, tells Qt that it must never grab the mouse or the
+            keyboard.
+        \o  -dograb (only under X11), running under a debugger can cause an
+            implicit -nograb, use -dograb to override.
+        \o  -sync (only under X11), switches to synchronous mode for
+            debugging.
+    \endlist
+
+    See \l{Debugging Techniques} for a more detailed explanation.
+
+    All Qt programs automatically support the following command line options:
+    \list
+        \o  -style= \e style, sets the application GUI style. Possible values
+            are \c motif, \c windows, and \c platinum. If you compiled Qt with
+            additional styles or have additional styles as plugins these will
+            be available to the \c -style command line option.
+        \o  -style \e style, is the same as listed above.
+        \o  -stylesheet= \e stylesheet, sets the application \l styleSheet. The
+            value must be a path to a file that contains the Style Sheet.
+            \note Relative URLs in the Style Sheet file are relative to the
+            Style Sheet file's path.
+        \o  -stylesheet \e stylesheet, is the same as listed above.
+        \o  -session= \e session, restores the application from an earlier
+            \l{Session Management}{session}.
+        \o  -session \e session, is the same as listed above.
+        \o  -widgetcount, prints debug message at the end about number of
+            widgets left undestroyed and maximum number of widgets existed at
+            the same time
+        \o  -reverse, sets the application's layout direction to
+            Qt::RightToLeft
+        \o  -graphicssystem, sets the backend to be used for on-screen widgets
+            and QPixmaps. Available options are \c{raster} and \c{opengl}.
+    \endlist
+
+    The Windows version of Qt supports an additional command line  option, if
+    Direct3D support has been compiled into Qt:
+    \list
+        \o  -direct3d will make the Direct3D paint engine the default widget
+            paint engine in Qt. \bold {This functionality is experimental.}
+    \endlist
+
+    The X11 version of Qt supports some traditional X11 command line options:
+    \list
+        \o  -display \e display, sets the X display (default is $DISPLAY).
+        \o  -geometry \e geometry, sets the client geometry of the first window
+            that is shown.
+        \o  -fn or \c -font \e font, defines the application font. The font
+            should be specified using an X logical font description.
+        \o  -bg or \c -background \e color, sets the default background color
+            and an application palette (light and dark shades are calculated).
+        \o  -fg or \c -foreground \e color, sets the default foreground color.
+        \o  -btn or \c -button \e color, sets the default button color.
+        \o  -name \e name, sets the application name.
+        \o  -title \e title, sets the application title.
+        \o  -visual \c TrueColor, forces the application to use a TrueColor
+            visual on an 8-bit display.
+        \o  -ncols \e count, limits the number of colors allocated in the color
+            cube on an 8-bit display, if the application is using the
+            QApplication::ManyColor color specification. If \e count is 216
+            then a 6x6x6 color cube is used (i.e. 6 levels of red, 6 of green,
+            and 6 of blue); for other values, a cube approximately proportional
+            to a 2x3x1 cube is used.
+        \o  -cmap, causes the application to install a private color map on an
+            8-bit display.
+        \o  -im, sets the input method server (equivalent to setting the
+            XMODIFIERS environment variable)
+        \o  -inputstyle, defines how the input is inserted into the given
+            widget, e.g., \c onTheSpot makes the input appear directly in the
+            widget, while \c overTheSpot makes the input appear in a box
+            floating over the widget and is not inserted until the editing is
+            done.
+    \endlist
+
+    \sa arguments()
 */
 
 QApplication::QApplication(int &argc, char **argv)
@@ -685,26 +672,26 @@ QApplication::QApplication(int &argc, char **argv, int _internal)
 
 
 /*!
-    Constructs an application object with \a argc command line arguments
-    in \a argv. If \a GUIenabled is true, a GUI application is
-    constructed, otherwise a non-GUI (console) application is created.
+    Constructs an application object with \a argc command line arguments in
+    \a argv. If \a GUIenabled is true, a GUI application is constructed,
+    otherwise a non-GUI (console) application is created.
 
-    \warning The data referred to by \a argc and \a argv must stay valid
-    for the entire lifetime of the QApplication object. In addition,
-    \a argc must be greater than zero and \a argv must contain at least
-    one valid character string.
+    \warning The data referred to by \a argc and \a argv must stay valid for
+    the entire lifetime of the QApplication object. In addition, \a argc must
+    be greater than zero and \a argv must contain at least one valid character
+    string.
 
-    Set \a GUIenabled to false for programs without a graphical user
-    interface that should be able to run without a window system.
+    Set \a GUIenabled to false for programs without a graphical user interface
+    that should be able to run without a window system.
 
-    On X11, the window system is initialized if \a GUIenabled is true.
-    If \a GUIenabled is false, the application does not connect to the
-    X server. On Windows and Macintosh, currently the window system is
-    always initialized, regardless of the value of GUIenabled. This may
-    change in future versions of Qt.
+    On X11, the window system is initialized if \a GUIenabled is true. If
+    \a GUIenabled is false, the application does not connect to the X server.
+    On Windows and Macintosh, currently the window system is always
+    initialized, regardless of the value of GUIenabled. This may change in
+    future versions of Qt.
 
-    The following example shows how to create an application that
-    uses a graphical interface when available.
+    The following example shows how to create an application that uses a
+    graphical interface when available.
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 0
 */
@@ -720,17 +707,17 @@ QApplication::QApplication(int &argc, char **argv, bool GUIenabled , int _intern
 
 
 /*!
-  Constructs an application object with \a argc command line arguments
-  in \a argv.
+    Constructs an application object with \a argc command line arguments in
+    \a argv.
 
-  \warning The data referred to by \a argc and \a argv must stay valid
-  for the entire lifetime of the QApplication object. In addition,
-  \a argc must be greater than zero and \a argv must contain at least
-  one valid character string.
+    \warning The data referred to by \a argc and \a argv must stay valid for
+    the entire lifetime of the QApplication object. In addition, \a argc must
+    be greater than zero and \a argv must contain at least one valid character
+    string.
 
-  With Qt for Embedded Linux, passing QApplication::GuiServer for \a type
-  makes this application the server (equivalent to running with the
-  \c -qws option).
+    With Qt for Embedded Linux, passing QApplication::GuiServer for \a type
+    makes this application the server (equivalent to running with the
+    \c -qws option).
 */
 QApplication::QApplication(int &argc, char **argv, Type type)
     : QCoreApplication(*new QApplicationPrivate(argc, argv, type))
@@ -778,16 +765,16 @@ static int aargc = 1;
 static char *aargv[] = { (char*)"unknown", 0 };
 
 /*!
-  \fn QApplication::QApplication(Display* display, Qt::HANDLE visual, Qt::HANDLE colormap)
+    \fn QApplication::QApplication(Display* display, Qt::HANDLE visual, Qt::HANDLE colormap)
 
-  Create an application, given an already open display \a display. If \a
-  visual and \a colormap are non-zero, the application will use those as
-  the default Visual and Colormap contexts.
+    Creates an application, given an already open display \a display. If
+    \a visual and \a colormap are non-zero, the application will use those
+    values as the default Visual and Colormap contexts.
 
-  \warning Qt only supports TrueColor visuals at depths higher than 8
-  bits-per-pixel.
+    \warning Qt only supports TrueColor visuals at depths higher than 8
+    bits-per-pixel.
 
-  This is available only on X11.
+    This function is only available on X11.
 */
 QApplication::QApplication(Display* dpy, Qt::HANDLE visual, Qt::HANDLE colormap)
     : QCoreApplication(*new QApplicationPrivate(aargc, aargv, GuiClient))
@@ -809,19 +796,18 @@ QApplication::QApplication(Display* dpy, Qt::HANDLE visual, Qt::HANDLE colormap,
 }
 
 /*!
-  \fn QApplication::QApplication(Display *display, int &argc, char **argv,
-                           Qt::HANDLE visual, Qt::HANDLE colormap)
+    \fn QApplication::QApplication(Display *display, int &argc, char **argv,
+        Qt::HANDLE visual, Qt::HANDLE colormap)
 
-  Create an application, given an already open \a display and using \a
-  argc command line arguments in \a argv. If \a visual and \a colormap
-  are non-zero, the application will use those as the default Visual
-  and Colormap contexts.
+    Creates an application, given an already open \a display and using \a argc
+    command line arguments in \a argv. If \a visual and \a colormap are
+    non-zero, the application will use those values as the default Visual
+    and Colormap contexts.
 
-  \warning Qt only supports TrueColor visuals at depths higher than 8
-  bits-per-pixel.
-
-  This is available only on X11.
+    \warning Qt only supports TrueColor visuals at depths higher than 8
+    bits-per-pixel.
 
+    This function is only available on X11.
 */
 QApplication::QApplication(Display *dpy, int &argc, char **argv,
                            Qt::HANDLE visual, Qt::HANDLE colormap)
@@ -923,19 +909,18 @@ QApplication::Type QApplication::type()
  *****************************************************************************/
 
 /*!
-  Returns the active popup widget.
+    Returns the active popup widget.
 
-  A popup widget is a special top-level widget that sets the \c
-  Qt::WType_Popup widget flag, e.g. the QMenu widget. When the
-  application opens a popup widget, all events are sent to the popup.
-  Normal widgets and modal widgets cannot be accessed before the popup
-  widget is closed.
+    A popup widget is a special top-level widget that sets the \c
+    Qt::WType_Popup widget flag, e.g. the QMenu widget. When the application
+    opens a popup widget, all events are sent to the popup. Normal widgets and
+    modal widgets cannot be accessed before the popup widget is closed.
 
-  Only other popup widgets may be opened when a popup widget is shown.
-  The popup widgets are organized in a stack. This function returns
-  the active popup widget at the top of the stack.
+    Only other popup widgets may be opened when a popup widget is shown. The
+    popup widgets are organized in a stack. This function returns the active
+    popup widget at the top of the stack.
 
-  \sa activeModalWidget(), topLevelWidgets()
+    \sa activeModalWidget(), topLevelWidgets()
 */
 
 QWidget *QApplication::activePopupWidget()
@@ -946,17 +931,17 @@ QWidget *QApplication::activePopupWidget()
 
 
 /*!
-  Returns the active modal widget.
+    Returns the active modal widget.
 
-  A modal widget is a special top-level widget which is a subclass of
-  QDialog that specifies the modal parameter of the constructor as
-  true. A modal widget must be closed before the user can continue
-  with other parts of the program.
+    A modal widget is a special top-level widget which is a subclass of QDialog
+    that specifies the modal parameter of the constructor as true. A modal
+    widget must be closed before the user can continue with other parts of the
+    program.
 
-  Modal widgets are organized in a stack. This function returns
-  the active modal widget at the top of the stack.
+    Modal widgets are organized in a stack. This function returns the active
+    modal widget at the top of the stack.
 
-  \sa activePopupWidget(), topLevelWidgets()
+    \sa activePopupWidget(), topLevelWidgets()
 */
 
 QWidget *QApplication::activeModalWidget()
@@ -965,8 +950,8 @@ QWidget *QApplication::activeModalWidget()
 }
 
 /*!
-  Cleans up any window system resources that were allocated by this
-  application. Sets the global variable \c qApp to 0.
+    Cleans up any window system resources that were allocated by this
+    application. Sets the global variable \c qApp to 0.
 */
 
 QApplication::~QApplication()
@@ -1092,8 +1077,8 @@ QApplication::~QApplication()
 /*!
     \fn QWidget *QApplication::widgetAt(const QPoint &point)
 
-    Returns the widget at global screen position \a point, or 0 if there
-    is no Qt widget there.
+    Returns the widget at global screen position \a point, or 0 if there is no
+    Qt widget there.
 
     This function can be slow.
 
@@ -1141,8 +1126,8 @@ QWidget *QApplication::widgetAt(const QPoint &p)
 
     \overload
 
-    Returns the widget at global screen position (\a x, \a y), or 0
-    if there is no Qt widget there.
+    Returns the widget at global screen position (\a x, \a y), or 0 if there is
+    no Qt widget there.
 */
 
 /*!
@@ -1211,16 +1196,17 @@ bool QApplication::compressEvent(QEvent *event, QObject *receiver, QPostEventLis
     \since 4.4
     \brief defines a threshold for auto maximizing widgets
 
-    The auto maximize threshold is only available
-    as part of Qt for Windows CE.
+    The auto maximize threshold is only available as part of Qt for Windows CE.
 
     This property defines a threshold for the size of a window as a percentage
-    of the screen size. If the minimum size hint of a window exceeds the threshold,
-    calling show() will then cause the window to be maximized automatically.
+    of the screen size. If the minimum size hint of a window exceeds the
+    threshold, calling show() will then cause the window to be maximized
+    automatically.
 
-    Setting the threshold to be 100 or greater means that it will cause it to always
-    be maximized. Setting it to be 50 means that the widget is maximized if the vertical
-    minimum size hint is at least 50% of the vertical screen size.
+    Setting the threshold to be 100 or greater means that it will cause it to
+    always be maximized. Setting it to be 50 means that the widget is maximized
+    if the vertical minimum size hint is at least 50% of the vertical screen
+    size.
 
     If -1 is specified then this will disable the feature.
 
@@ -1233,12 +1219,11 @@ bool QApplication::compressEvent(QEvent *event, QObject *receiver, QPostEventLis
     \since 4.5
     \brief toggles automatic SIP (software input panel) visibility
 
-    The auto SIP property is only available
-    as part of Qt for Windows CE.
+    The auto SIP property is only available as part of Qt for Windows CE.
 
     Set this property to true to automatically display the SIP when entering
-    widgets that accept keyboard input. This only affects widgets that have the
-    attribute WA_InputMethodEnabled set.
+    widgets that accept keyboard input. This property only affects widgets with
+    the WA_InputMethodEnabled attribute set.
 */
 
 #ifdef Q_OS_WINCE
@@ -1290,9 +1275,9 @@ void QApplication::setStyleSheet(const QString& styleSheet)
 #endif // QT_NO_STYLE_STYLESHEET
 
 /*!
-  Returns the application's style object.
+    Returns the application's style object.
 
-  \sa setStyle(), QStyle
+    \sa setStyle(), QStyle
 */
 QStyle *QApplication::style()
 {
@@ -1375,22 +1360,21 @@ QStyle *QApplication::style()
 }
 
 /*!
-    Sets the application's GUI style to \a style. Ownership of the style
-    object is transferred to QApplication, so QApplication will delete
-    the style object on application exit or when a new style is set and
-    the old style is still the parent of the application object.
+    Sets the application's GUI style to \a style. Ownership of the style object
+    is transferred to QApplication, so QApplication will delete the style
+    object on application exit or when a new style is set and the old style is
+    still the parent of the application object.
 
     Example usage:
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 1
 
-    When switching application styles, the color palette is set back to
-    the initial colors or the system defaults. This is necessary since
-    certain styles have to adapt the color palette to be fully
-    style-guide compliant.
+    When switching application styles, the color palette is set back to the
+    initial colors or the system defaults. This is necessary since certain
+    styles have to adapt the color palette to be fully style-guide compliant.
 
-    Note that setting the style before a palette has been set
-    (i.e. before creating QApplication) will cause the application to
-    use QStyle::standardPalette() for the palette.
+    Setting the style before a palette has been se, i.e., before creating
+    QApplication, will cause the application to use QStyle::standardPalette()
+    for the palette.
 
     \warning Qt style sheets are currently not supported for custom QStyle
     subclasses. We plan to address this in some future release.
@@ -1493,20 +1477,20 @@ void QApplication::setStyle(QStyle *style)
 }
 
 /*!
-  \overload
+    \overload
 
-  Requests a QStyle object for \a style from the QStyleFactory.
+    Requests a QStyle object for \a style from the QStyleFactory.
 
-  The string must be one of the QStyleFactory::keys(), typically one
-  of "windows", "motif", "cde", "plastique", "windowsxp", or
-  "macintosh". Style names are case insensitive.
+    The string must be one of the QStyleFactory::keys(), typically one of
+    "windows", "motif", "cde", "plastique", "windowsxp", or "macintosh". Style
+    names are case insensitive.
 
-  Returns 0 if an unknown \a style is passed, otherwise the QStyle object
-  returned is set as the application's GUI style.
+    Returns 0 if an unknown \a style is passed, otherwise the QStyle object
+    returned is set as the application's GUI style.
 
-  \warning To ensure that the application's style is set correctly, it is
-  best to call this function before the QApplication constructor, if
-  possible.
+    \warning To ensure that the application's style is set correctly, it is
+    best to call this function before the QApplication constructor, if
+    possible.
 */
 QStyle* QApplication::setStyle(const QString& style)
 {
@@ -1519,20 +1503,19 @@ QStyle* QApplication::setStyle(const QString& style)
 }
 
 /*!
-   \since 4.5
+    \since 4.5
 
-   Sets the default graphics backend to \a system, which will be used
-   for on-screen widgets and QPixmaps. The available systems are
-   \c{"native"}, \c{"raster"} and \c{"opengl"}.
+    Sets the default graphics backend to \a system, which will be used for
+    on-screen widgets and QPixmaps. The available systems are \c{"native"},
+    \c{"raster"} and \c{"opengl"}.
 
-   Note that this function call overrides both the application
-   commandline \c{-graphicssystem} switch and the configure
-   \c{-graphicssystem} switch.
+    This function call overrides both the application commandline
+    \c{-graphicssystem} switch and the configure \c{-graphicssystem} switch.
 
-   \warning This function must be called before the QApplication
-   constructor is called.
+    \warning This function must be called before the QApplication constructor
+    is called.
 
-   The \c{"opengl"} option is currently considered experimental.
+    \note The \c{"opengl"} option is currently experimental.
 */
 
 void QApplication::setGraphicsSystem(const QString &system)
@@ -1541,9 +1524,10 @@ void QApplication::setGraphicsSystem(const QString &system)
 }
 
 /*!
-  Returns the color specification.
-  \sa QApplication::setColorSpec()
- */
+    Returns the color specification.
+
+    \sa QApplication::setColorSpec()
+*/
 
 int QApplication::colorSpec()
 {
@@ -1551,54 +1535,54 @@ int QApplication::colorSpec()
 }
 
 /*!
-  Sets the color specification for the application to \a spec.
-
-  The color specification controls how the application allocates colors
-  when run on a display with a limited amount of colors, e.g. 8 bit / 256
-  color displays.
-
-  The color specification must be set before you create the QApplication
-  object.
-
-  The options are:
-  \list
-  \o QApplication::NormalColor.
-    This is the default color allocation strategy. Use this option if
-    your application uses buttons, menus, texts and pixmaps with few
-    colors. With this option, the application uses system global
-    colors. This works fine for most applications under X11, but on
-    Windows machines it may cause dithering of non-standard colors.
-  \o QApplication::CustomColor.
-    Use this option if your application needs a small number of custom
-    colors. On X11, this option is the same as NormalColor. On Windows, Qt
-    creates a Windows palette, and allocates colors to it on demand.
-  \o QApplication::ManyColor.
-    Use this option if your application is very color hungry
-    (e.g. it requires thousands of colors).
-    Under X11 the effect is:
+    Sets the color specification for the application to \a spec.
+
+    The color specification controls how the application allocates colors when
+    run on a display with a limited amount of colors, e.g. 8 bit / 256 color
+    displays.
+
+    The color specification must be set before you create the QApplication
+    object.
+
+    The options are:
     \list
-    \o For 256-color displays which have at best a 256 color true
-       color visual, the default visual is used, and colors are
-       allocated from a color cube. The color cube is the 6x6x6 (216
-       color) "Web palette" (the red, green, and blue components
-       always have one of the following values: 0x00, 0x33, 0x66,
-       0x99, 0xCC, or 0xFF), but the number of colors can be changed
-       by the \e -ncols option. The user can force the application to
-       use the true color visual with the \link
-       QApplication::QApplication() -visual \endlink option.
-    \o For 256-color displays which have a true color visual with more
-       than 256 colors, use that visual. Silicon Graphics X servers
-       have this feature, for example. They provide an 8 bit visual
-       by default but can deliver true color when asked.
+        \o  QApplication::NormalColor. This is the default color allocation
+            strategy. Use this option if your application uses buttons, menus,
+            texts and pixmaps with few colors. With this option, the
+            application uses system global colors. This works fine for most
+            applications under X11, but on Windows machines it may cause
+            dithering of non-standard colors.
+        \o  QApplication::CustomColor. Use this option if your application
+            needs a small number of custom colors. On X11, this option is the
+            same as NormalColor. On Windows, Qt creates a Windows palette, and
+            allocates colors to it on demand.
+        \o  QApplication::ManyColor. Use this option if your application is
+            very color hungry, e.g., it requires thousands of colors. \br
+            Under X11 the effect is:
+            \list
+                \o  For 256-color displays which have at best a 256 color true
+                    color visual, the default visual is used, and colors are
+                    allocated from a color cube. The color cube is the 6x6x6
+                    (216 color) "Web palette" (the red, green, and blue
+                    components always have one of the following values: 0x00,
+                    0x33, 0x66, 0x99, 0xCC, or 0xFF), but the number of colors
+                    can be changed by the \e -ncols option. The user can force
+                    the application to use the true color visual with the
+                    \l{QApplication::QApplication()}{-visual} option.
+                \o  For 256-color displays which have a true color visual with
+                    more than 256 colors, use that visual. Silicon Graphics X
+                    servers this feature, for example. They provide an 8 bit
+                    visual by default but can deliver true color when asked.
+            \endlist
+            On Windows, Qt creates a Windows palette, and fills it with a color
+            cube.
     \endlist
-    On Windows, Qt creates a Windows palette, and fills it with a color cube.
-  \endlist
 
-  Be aware that the CustomColor and ManyColor choices may lead to colormap
-  flashing: The foreground application gets (most) of the available
-  colors, while the background windows will look less attractive.
+    Be aware that the CustomColor and ManyColor choices may lead to colormap
+    flashing: The foreground application gets (most) of the available colors,
+    while the background windows will look less attractive.
 
-  Example:
+    Example:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 2
 
@@ -1618,10 +1602,9 @@ void QApplication::setColorSpec(int spec)
     \brief the minimum size that any GUI element that the user can interact
            with should have
 
-    For example, no button should be resized to be smaller than the
-    global strut size. The strut size should be considered when
-    reimplementing GUI controls that may be used on touch-screens or
-    similar I/O devices.
+    For example, no button should be resized to be smaller than the global
+    strut size. The strut size should be considered when reimplementing GUI
+    controls that may be used on touch-screens or similar I/O devices.
 
     Example:
 
@@ -1655,12 +1638,11 @@ QPalette QApplication::palette()
     \fn QPalette QApplication::palette(const QWidget* widget)
     \overload
 
-    If a \a widget is passed, the default palette for the
-    widget's class is returned. This may or may not be the application
-    palette. In most cases there isn't a special palette for certain
-    types of widgets, but one notable exception is the popup menu
-    under Windows, if the user has defined a special background color
-    for menus in the display settings.
+    If a \a widget is passed, the default palette for the widget's class is
+    returned. This may or may not be the application palette. In most cases
+    there is no special palette for certain types of widgets, but one notable
+    exception is the popup menu under Windows, if the user has defined a
+    special background color for menus in the display settings.
 
     \sa setPalette(), QWidget::palette()
 */
@@ -1754,26 +1736,26 @@ void QApplicationPrivate::setPalette_helper(const QPalette &palette, const char*
 }
 
 /*!
-  Changes the default application palette to \a palette.
+    Changes the default application palette to \a palette.
 
-  If \a className is passed, the change applies only to widgets that
-  inherit \a className (as reported by QObject::inherits()). If
-  \a className is left 0, the change affects all widgets, thus overriding
-  any previously set class specific palettes.
+    If \a className is passed, the change applies only to widgets that inherit
+    \a className (as reported by QObject::inherits()). If \a className is left
+    0, the change affects all widgets, thus overriding any previously set class
+    specific palettes.
 
-  The palette may be changed according to the current GUI style in
-  QStyle::polish().
+    The palette may be changed according to the current GUI style in
+    QStyle::polish().
 
-  \warning Do not use this function in conjunction with \l{Qt Style Sheets}.
-  When using style sheets, the palette of a widget can be customized using the "color",
-  "background-color", "selection-color", "selection-background-color" and
-  "alternate-background-color".
+    \warning Do not use this function in conjunction with \l{Qt Style Sheets}.
+    When using style sheets, the palette of a widget can be customized using
+    the "color", "background-color", "selection-color",
+    "selection-background-color" and "alternate-background-color".
 
-    Note that some styles do not use the palette for all drawing,
-    for instance, if they make use of native theme engines. This is
-    the case for the Windows XP, Windows Vista, and Mac OS X styles.
+    \note Some styles do not use the palette for all drawing, for instance, if
+    they make use of native theme engines. This is the case for the Windows XP,
+    Windows Vista, and Mac OS X styles.
 
-  \sa QWidget::setPalette(), palette(), QStyle::polish()
+    \sa QWidget::setPalette(), palette(), QStyle::polish()
 */
 
 void QApplication::setPalette(const QPalette &palette, const char* className)
@@ -1878,15 +1860,15 @@ QFont QApplication::font(const char *className)
 
 
 /*!
-    Changes the default application font to \a font. If \a className
-    is passed, the change applies only to classes that inherit \a
-    className (as reported by QObject::inherits()).
+    Changes the default application font to \a font. If \a className is passed,
+    the change applies only to classes that inherit \a className (as reported
+    by QObject::inherits()).
 
-    On application start-up, the default font depends on the window
-    system. It can vary depending on both the window system version and
-    the locale. This function lets you override the default font; but
-    overriding may be a bad idea because, for example, some locales need
-    extra large fonts to support their special characters.
+    On application start-up, the default font depends on the window system. It
+    can vary depending on both the window system version and the locale. This
+    function lets you override the default font; but overriding may be a bad
+    idea because, for example, some locales need extra large fonts to support
+    their special characters.
 
     \warning Do not use this function in conjunction with \l{Qt Style Sheets}.
     The font of an application can be customized using the "font" style sheet
@@ -1988,11 +1970,10 @@ void QApplication::setWindowIcon(const QIcon &icon)
 }
 
 /*!
-    Returns a list of the top-level widgets (windows) in the
-    application.
+    Returns a list of the top-level widgets (windows) in the application.
 
-    Note that some of the top-level widgets may be hidden, for
-    example a tooltip if no tooltip is currently shown.
+    \note Some of the top-level widgets may be hidden, for example a tooltip if
+    no tooltip is currently shown.
 
     Example:
 
@@ -2018,7 +1999,7 @@ QWidgetList QApplication::topLevelWidgets()
 
     The list is empty (QList::isEmpty()) if there are no widgets.
 
-    Note that some of the widgets may be hidden.
+    \note Some of the widgets may be hidden.
 
     Example:
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 5
@@ -2037,10 +2018,10 @@ QWidgetList QApplication::allWidgets()
 }
 
 /*!
-  Returns the application widget that has the keyboard input focus, or
-  0 if no widget in this application has the focus.
+    Returns the application widget that has the keyboard input focus, or 0 if
+    no widget in this application has the focus.
 
-  \sa QWidget::setFocus(), QWidget::hasFocus(), activeWindow(), focusChanged()
+    \sa QWidget::setFocus(), QWidget::hasFocus(), activeWindow(), focusChanged()
 */
 
 QWidget *QApplication::focusWidget()
@@ -2121,12 +2102,12 @@ void QApplicationPrivate::setFocusWidget(QWidget *focus, Qt::FocusReason reason)
 
 
 /*!
-  Returns the application top-level window that has the keyboard input
-  focus, or 0 if no application window has the focus. Note that
-  there might be an activeWindow() even if there is no focusWidget(),
-  for example if no widget in that window accepts key events.
+    Returns the application top-level window that has the keyboard input focus,
+    or 0 if no application window has the focus. There might be an
+    activeWindow() even if there is no focusWidget(), for example if no widget
+    in that window accepts key events.
 
-  \sa QWidget::setFocus(), QWidget::hasFocus(), focusWidget()
+    \sa QWidget::setFocus(), QWidget::hasFocus(), focusWidget()
 */
 
 QWidget *QApplication::activeWindow()
@@ -2135,9 +2116,9 @@ QWidget *QApplication::activeWindow()
 }
 
 /*!
-  Returns display (screen) font metrics for the application font.
+    Returns display (screen) font metrics for the application font.
 
-  \sa font(), setFont(), QWidget::fontMetrics(), QPainter::fontMetrics()
+    \sa font(), setFont(), QWidget::fontMetrics(), QPainter::fontMetrics()
 */
 
 QFontMetrics QApplication::fontMetrics()
@@ -2149,19 +2130,20 @@ QFontMetrics QApplication::fontMetrics()
 /*!
     Closes all top-level windows.
 
-    This function is particularly useful for applications with many
-    top-level windows. It could, for example, be connected to a
-    \gui{Exit} entry in the \gui{File} menu:
+    This function is particularly useful for applications with many top-level
+    windows. It could, for example, be connected to a \gui{Exit} entry in the
+    \gui{File} menu:
 
     \snippet examples/mainwindows/mdi/mainwindow.cpp 0
 
-    The windows are closed in random order, until one window does not
-    accept the close event. The application quits when the last window
-    was successfully closed; this can be turned off by setting \l
-    quitOnLastWindowClosed to false.
+    The windows are closed in random order, until one window does not accept
+    the close event. The application quits when the last window was
+    successfully closed; this can be turned off by setting
+    \l quitOnLastWindowClosed to false.
 
-    \sa quitOnLastWindowClosed, lastWindowClosed()  QWidget::close(), QWidget::closeEvent(), lastWindowClosed(),
-        quit(), topLevelWidgets(), QWidget::isWindow()
+    \sa quitOnLastWindowClosed, lastWindowClosed(), QWidget::close(),
+    QWidget::closeEvent(), lastWindowClosed(), quit(), topLevelWidgets(),
+    QWidget::isWindow()
 */
 void QApplication::closeAllWindows()
 {
@@ -2184,11 +2166,11 @@ void QApplication::closeAllWindows()
 }
 
 /*!
-    Displays a simple message box about Qt. The message includes the
-    version number of Qt being used by the application.
+    Displays a simple message box about Qt. The message includes the version
+    number of Qt being used by the application.
 
-    This is useful for inclusion in the \gui Help menu of an application,
-    as shown in the \l{mainwindows/menus}{Menus} example.
+    This is useful for inclusion in the \gui Help menu of an application, as
+    shown in the \l{mainwindows/menus}{Menus} example.
 
     This function is a convenience slot for QMessageBox::aboutQt().
 */
@@ -2209,22 +2191,20 @@ void QApplication::aboutQt()
 /*!
     \fn void QApplication::lastWindowClosed()
 
-    This signal is emitted from QApplication::exec() when the last
-    visible primary window (i.e. window with no parent) with the
-    Qt::WA_QuitOnClose attribute set is closed.
+    This signal is emitted from QApplication::exec() when the last visible
+    primary window (i.e. window with no parent) with the Qt::WA_QuitOnClose
+    attribute set is closed.
 
     By default,
 
     \list
+        \o  this attribute is set for all widgets except transient windows such
+            as splash screens, tool windows, and popup menus
 
-    \i this attribute is set for all widgets except transient windows
-    such as splash screens, tool windows, and popup menus
-
-    \i QApplication implicitly quits when this signal is emitted.
-
+        \o  QApplication implicitly quits when this signal is emitted.
     \endlist
 
-    This feature be turned off by setting \l quitOnLastWindowClosed to
+    This feature can be turned off by setting \l quitOnLastWindowClosed to
     false.
 
     \sa QWidget::close()
@@ -2234,15 +2214,15 @@ void QApplication::aboutQt()
     \since 4.1
     \fn void QApplication::focusChanged(QWidget *old, QWidget *now)
 
-    This signal is emitted when the widget that has keyboard focus
-    changed from \a old to \a now, i.e. because the user pressed the
-    tab-key, clicked into a widget or changed the active window. Note
-    that both \a old and \a now can be the null-pointer.
+    This signal is emitted when the widget that has keyboard focus changed from
+    \a old to \a now, i.e., because the user pressed the tab-key, clicked into
+    a widget or changed the active window. Both \a old and \a now can be the
+    null-pointer.
 
-    The signal is emitted after both widget have been notified about
-    the change through QFocusEvent.
+    The signal is emitted after both widget have been notified about the change
+    through QFocusEvent.
 
-    \sa QWidget::setFocus() QWidget::clearFocus() Qt::FocusReason
+    \sa QWidget::setFocus(), QWidget::clearFocus(), Qt::FocusReason
 */
 
 /*!
@@ -2251,10 +2231,10 @@ void QApplication::aboutQt()
 
     This signal is emitted when application fonts are loaded or removed.
 
-   \sa QFontDatabase::addApplicationFont()
-   \sa QFontDatabase::addApplicationFontFromData()
-   \sa QFontDatabase::removeAllApplicationFonts()
-   \sa QFontDatabase::removeApplicationFont()
+    \sa QFontDatabase::addApplicationFont(),
+    QFontDatabase::addApplicationFontFromData(),
+    QFontDatabase::removeAllApplicationFonts(),
+    QFontDatabase::removeApplicationFont()
 */
 
 #ifndef QT_NO_TRANSLATION
@@ -2351,18 +2331,17 @@ void QApplication::syncX()        {}                // do nothing
     \fn void QApplication::setActiveWindow(QWidget* active)
 
     Sets the active window to the \a active widget in response to a system
-    event. The function is called from the platform specific event
-    handlers.
+    event. The function is called from the platform specific event handlers.
 
-    \warning This function does \e not set the keyboard focus to the
-    active widget. Call QWidget::activateWindow() instead.
+    \warning This function does \e not set the keyboard focus to the active
+    widget. Call QWidget::activateWindow() instead.
 
-    It sets the activeWindow() and focusWidget() attributes and sends
-    proper \l{QEvent::WindowActivate}{WindowActivate}/\l{QEvent::WindowDeactivate}{WindowDeactivate}
-    and \l{QEvent::FocusIn}{FocusIn}/\l{QEvent::FocusOut}{FocusOut} events
-    to all appropriate widgets. The window will then be painted in
-    active state (e.g. cursors in line edits will blink), and it will
-    have tool tips enabled.
+    It sets the activeWindow() and focusWidget() attributes and sends proper
+    \l{QEvent::WindowActivate}{WindowActivate}/\l{QEvent::WindowDeactivate}
+    {WindowDeactivate} and \l{QEvent::FocusIn}{FocusIn}/\l{QEvent::FocusOut}
+    {FocusOut} events to all appropriate widgets. The window will then be
+    painted in active state (e.g. cursors in line edits will blink), and it
+    will have tool tips enabled.
 
     \sa activeWindow(), QWidget::activateWindow()
 */
@@ -2508,11 +2487,11 @@ QWidget *QApplicationPrivate::focusNextPrevChild_helper(QWidget *toplevel, bool
 }
 
 /*!
-   \fn void QApplicationPrivate::dispatchEnterLeave(QWidget* enter, QWidget* leave)
-   \internal
+    \fn void QApplicationPrivate::dispatchEnterLeave(QWidget* enter, QWidget* leave)
+    \internal
 
-  Creates the proper Enter/Leave event when widget \a enter is entered
-  and widget \a leave is left.
+    Creates the proper Enter/Leave event when widget \a enter is entered and
+    widget \a leave is left.
  */
 #if defined(Q_WS_WIN)
   extern void qt_win_set_cursor(QWidget *, bool);
@@ -3029,11 +3008,11 @@ void QApplicationPrivate::sendSyntheticEnterLeave(QWidget *widget)
 /*!
     Returns the desktop widget (also called the root window).
 
-    Note that the desktop may be composed of multiple screens, so it would be
-    incorrect, for example, to attempt to \e center some widget in the
-    desktop's geometry. QDesktopWidget has various functions for obtaining
-    useful geometries upon the desktop, such as QDesktopWidget::screenGeometry()
-    and QDesktopWidget::availableGeometry().
+    The desktop may be composed of multiple screens, so it would be incorrect,
+    for example, to attempt to \e center some widget in the desktop's geometry.
+    QDesktopWidget has various functions for obtaining useful geometries upon
+    the desktop, such as QDesktopWidget::screenGeometry() and
+    QDesktopWidget::availableGeometry().
 
     On X11, it is also possible to draw on the desktop.
 */
@@ -3048,10 +3027,10 @@ QDesktopWidget *QApplication::desktop()
 
 #ifndef QT_NO_CLIPBOARD
 /*!
-  Returns a pointer to the application global clipboard.
+    Returns a pointer to the application global clipboard.
 
-  \note The QApplication object should already be constructed before
-  accessing the clipboard.
+    \note The QApplication object should already be constructed before
+    accessing the clipboard.
 */
 QClipboard *QApplication::clipboard()
 {
@@ -3067,11 +3046,11 @@ QClipboard *QApplication::clipboard()
 #endif // QT_NO_CLIPBOARD
 
 /*!
-    Sets whether Qt should use the system's standard colors, fonts,
-    etc., to \a on. By default, this is true.
+    Sets whether Qt should use the system's standard colors, fonts, etc., to
+    \a on. By default, this is true.
 
-    This function must be called before creating the QApplication
-    object, like this:
+    This function must be called before creating the QApplication object, like
+    this:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 6
 
@@ -3083,8 +3062,8 @@ void QApplication::setDesktopSettingsAware(bool on)
 }
 
 /*!
-    Returns true if Qt is set to use the system's standard colors,
-    fonts, etc.; otherwise returns false. The default is true.
+    Returns true if Qt is set to use the system's standard colors, fonts, etc.;
+    otherwise returns false. The default is true.
 
     \sa setDesktopSettingsAware()
 */
@@ -3094,17 +3073,17 @@ bool QApplication::desktopSettingsAware()
 }
 
 /*!
-  Returns the current state of the modifier keys on the keyboard. The
-  current state is updated sychronously as the event queue is emptied
-  of events that will spontaneously change the keyboard state
-  (QEvent::KeyPress and QEvent::KeyRelease events).
+    Returns the current state of the modifier keys on the keyboard. The current
+    state is updated sychronously as the event queue is emptied of events that
+    will spontaneously change the keyboard state (QEvent::KeyPress and
+    QEvent::KeyRelease events).
 
-  It should be noted this may not reflect the actual keys held on the
-  input device at the time of calling but rather the modifiers as
-  last reported in one of the above events. If no keys are being held
-  Qt::NoModifier is returned.
+    It should be noted this may not reflect the actual keys held on the input
+    device at the time of calling but rather the modifiers as last reported in
+    one of the above events. If no keys are being held Qt::NoModifier is
+    returned.
 
-  \sa mouseButtons()
+    \sa mouseButtons()
 */
 
 Qt::KeyboardModifiers QApplication::keyboardModifiers()
@@ -3113,17 +3092,17 @@ Qt::KeyboardModifiers QApplication::keyboardModifiers()
 }
 
 /*!
-  Returns the current state of the buttons on the mouse. The current
-  state is updated syncronously as the event queue is emptied of
-  events that will spontaneously change the mouse state
-  (QEvent::MouseButtonPress and QEvent::MouseButtonRelease events).
+    Returns the current state of the buttons on the mouse. The current state is
+    updated syncronously as the event queue is emptied of events that will
+    spontaneously change the mouse state (QEvent::MouseButtonPress and
+    QEvent::MouseButtonRelease events).
 
-  It should be noted this may not reflect the actual buttons held on
-  theinput device at the time of calling but rather the mouse buttons
-  as last reported in one of the above events. If no mouse buttons are
-  being held Qt::NoButton is returned.
+    It should be noted this may not reflect the actual buttons held on the
+    input device at the time of calling but rather the mouse buttons as last
+    reported in one of the above events. If no mouse buttons are being held
+    Qt::NoButton is returned.
 
-  \sa keyboardModifiers()
+    \sa keyboardModifiers()
 */
 
 Qt::MouseButtons QApplication::mouseButtons()
@@ -3132,43 +3111,40 @@ Qt::MouseButtons QApplication::mouseButtons()
 }
 
 /*!
-  \fn bool QApplication::isSessionRestored() const
+    \fn bool QApplication::isSessionRestored() const
 
-  Returns true if the application has been restored from an earlier
-  \link session.html session\endlink; otherwise returns false.
+    Returns true if the application has been restored from an earlier
+    \l{Session Management}{session}; otherwise returns false.
 
-  \sa sessionId(), commitData(), saveState()
+    \sa sessionId(), commitData(), saveState()
 */
 
 
 /*!
-  \fn QString QApplication::sessionId() const
+    \fn QString QApplication::sessionId() const
 
-  Returns the current \link session.html session's\endlink identifier.
+    Returns the current \l{Session Management}{session's} identifier.
 
-  If the application has been restored from an earlier session, this
-  identifier is the same as it was in that previous session.
+    If the application has been restored from an earlier session, this
+    identifier is the same as it was in that previous session. The session
+    identifier is guaranteed to be unique both for different applications
+    and for different instances of the same application.
 
-  The session identifier is guaranteed to be unique both for different
-  applications and for different instances of the same application.
-
-  \sa isSessionRestored(), sessionKey(), commitData(), saveState()
- */
+    \sa isSessionRestored(), sessionKey(), commitData(), saveState()
+*/
 
 /*!
-  \fn QString QApplication::sessionKey() const
+    \fn QString QApplication::sessionKey() const
 
-  Returns the session key in the current \link session.html
-  session\endlink.
+    Returns the session key in the current \l{Session Management}{session}.
 
-  If the application has been restored from an earlier session, this
-  key is the same as it was when the previous session ended.
+    If the application has been restored from an earlier session, this key is
+    the same as it was when the previous session ended.
 
-  The session key changes with every call of commitData() or
-  saveState().
+    The session key changes with every call of commitData() or saveState().
 
-  \sa isSessionRestored(), sessionId(), commitData(), saveState()
- */
+    \sa isSessionRestored(), sessionId(), commitData(), saveState()
+*/
 #ifndef QT_NO_SESSIONMANAGER
 bool QApplication::isSessionRestored() const
 {
@@ -3191,59 +3167,57 @@ QString QApplication::sessionKey() const
 
 
 
-
-
 /*!
-  \since 4.2
-  \fn void QApplication::commitDataRequest(QSessionManager &manager)
+    \since 4.2
+    \fn void QApplication::commitDataRequest(QSessionManager &manager)
 
-  This signal deals with \link session.html session
-  management\endlink. It is emitted when the QSessionManager wants the
-  application to commit all its data.
+    This signal deals with \l{Session Management}{session management}. It is
+    emitted when the QSessionManager wants the application to commit all its
+    data.
 
-  Usually this means saving all open files, after getting
-  permission from the user. Furthermore you may want to provide a means
-  by which the user can cancel the shutdown.
+    Usually this means saving all open files, after getting permission from
+    the user. Furthermore you may want to provide a means by which the user
+    can cancel the shutdown.
 
-  Note that you should not exit the application when called.
-  Instead, the session manager may or may not do this afterwards,
-  depending on the context.
+    You should not exit the application within this signal. Instead,
+    the session manager may or may not do this afterwards, depending on the
+    context.
 
-  \warning Within this signal, no user interaction is possible, \e
-  unless you ask the \a manager for explicit permission. See
-  QSessionManager::allowsInteraction() and
-  QSessionManager::allowsErrorInteraction() for details and example
-  usage.
+    \warning Within this signal, no user interaction is possible, \e
+    unless you ask the \a manager for explicit permission. See
+    QSessionManager::allowsInteraction() and
+    QSessionManager::allowsErrorInteraction() for details and example
+    usage.
 
-  Note: You should use Qt::DirectConnection when connecting to this signal.
+    \note You should use Qt::DirectConnection when connecting to this signal.
 
-  \sa isSessionRestored(), sessionId(), saveState(), {Session Management}
+    \sa isSessionRestored(), sessionId(), saveState(), {Session Management}
 */
 
 /*!
-  This function deals with \link session.html session
-  management\endlink. It is invoked when the QSessionManager wants the
-  application to commit all its data.
+    This function deals with \l{Session Management}{session management}. It is
+    invoked when the QSessionManager wants the application to commit all its
+    data.
 
-  Usually this means saving all open files, after getting
-  permission from the user. Furthermore you may want to provide a means
-  by which the user can cancel the shutdown.
+    Usually this means saving all open files, after getting permission from the
+    user. Furthermore you may want to provide a means by which the user can
+    cancel the shutdown.
 
-  Note that you should not exit the application within this function.
-  Instead, the session manager may or may not do this afterwards,
-  depending on the context.
+    You should not exit the application within this function. Instead, the
+    session manager may or may not do this afterwards, depending on the
+    context.
 
-  \warning Within this function, no user interaction is possible, \e
-  unless you ask the \a manager for explicit permission. See
-  QSessionManager::allowsInteraction() and
-  QSessionManager::allowsErrorInteraction() for details and example
-  usage.
+    \warning Within this function, no user interaction is possible, \e
+    unless you ask the \a manager for explicit permission. See
+    QSessionManager::allowsInteraction() and
+    QSessionManager::allowsErrorInteraction() for details and example
+    usage.
 
-  The default implementation requests interaction and sends a close
-  event to all visible top-level widgets. If any event was
-  rejected, the shutdown is canceled.
+    The default implementation requests interaction and sends a close event to
+    all visible top-level widgets. If any event was rejected, the shutdown is
+    canceled.
 
-  \sa isSessionRestored(), sessionId(), saveState(), {Session Management}
+    \sa isSessionRestored(), sessionId(), saveState(), {Session Management}
 */
 #ifndef QT_NO_SESSIONMANAGER
 void QApplication::commitData(QSessionManager& manager )
@@ -3269,58 +3243,54 @@ void QApplication::commitData(QSessionManager& manager )
 }
 
 /*!
-  \since 4.2
-  \fn void QApplication::saveStateRequest(QSessionManager &manager)
+    \since 4.2
+    \fn void QApplication::saveStateRequest(QSessionManager &manager)
 
-  This signal deals with \link session.html session
-  management\endlink. It is invoked when the
-  \link QSessionManager session manager \endlink wants the application
-  to preserve its state for a future session.
+    This signal deals with \l{Session Management}{session management}. It is
+    invoked when the \l{QSessionManager}{session manager} wants the application
+    to preserve its state for a future session.
 
-  For example, a text editor would create a temporary file that
-  includes the current contents of its edit buffers, the location of
-  the cursor and other aspects of the current editing session.
+    For example, a text editor would create a temporary file that includes the
+    current contents of its edit buffers, the location of the cursor and other
+    aspects of the current editing session.
 
-  Note that you should never exit the application within this
-  signal. Instead, the session manager may or may not do this
-  afterwards, depending on the context. Futhermore, most session
-  managers will very likely request a saved state immediately after
-  the application has been started. This permits the session manager
-  to learn about the application's restart policy.
+    You should never exit the application within this signal. Instead, the
+    session manager may or may not do this afterwards, depending on the
+    context. Futhermore, most session managers will very likely request a saved
+    state immediately after the application has been started. This permits the
+    session manager to learn about the application's restart policy.
 
-  \warning Within this function, no user interaction is possible, \e
-  unless you ask the \a manager for explicit permission. See
-  QSessionManager::allowsInteraction() and
-  QSessionManager::allowsErrorInteraction() for details.
+    \warning Within this function, no user interaction is possible, \e
+    unless you ask the \a manager for explicit permission. See
+    QSessionManager::allowsInteraction() and
+    QSessionManager::allowsErrorInteraction() for details.
 
-  Note:: You should use Qt::DirectConnection when connecting to this signal.
+    \note You should use Qt::DirectConnection when connecting to this signal.
 
-  \sa isSessionRestored(), sessionId(), commitData(), {Session Management}
+    \sa isSessionRestored(), sessionId(), commitData(), {Session Management}
 */
 
 /*!
-  This function deals with \link session.html session
-  management\endlink. It is invoked when the
-  \link QSessionManager session manager \endlink wants the application
-  to preserve its state for a future session.
+    This function deals with \l{Session Management}{session management}. It is
+    invoked when the \l{QSessionManager}{session manager} wants the application
+    to preserve its state for a future session.
 
-  For example, a text editor would create a temporary file that
-  includes the current contents of its edit buffers, the location of
-  the cursor and other aspects of the current editing session.
+    For example, a text editor would create a temporary file that includes the
+    current contents of its edit buffers, the location of the cursor and other
+    aspects of the current editing session.
 
-  Note that you should never exit the application within this
-  function. Instead, the session manager may or may not do this
-  afterwards, depending on the context. Futhermore, most session
-  managers will very likely request a saved state immediately after
-  the application has been started. This permits the session manager
-  to learn about the application's restart policy.
+    You should never exit the application within this function. Instead, the
+    session manager may or may not do this afterwards, depending on the
+    context. Futhermore, most session managers will very likely request a saved
+    state immediately after the application has been started. This permits the
+    session manager to learn about the application's restart policy.
 
-  \warning Within this function, no user interaction is possible, \e
-  unless you ask the \a manager for explicit permission. See
-  QSessionManager::allowsInteraction() and
-  QSessionManager::allowsErrorInteraction() for details.
+    \warning Within this function, no user interaction is possible, \e
+    unless you ask the \a manager for explicit permission. See
+    QSessionManager::allowsInteraction() and
+    QSessionManager::allowsErrorInteraction() for details.
 
-  \sa isSessionRestored(), sessionId(), commitData(), {Session Management}
+    \sa isSessionRestored(), sessionId(), commitData(), {Session Management}
 */
 
 void QApplication::saveState(QSessionManager &manager)
@@ -3344,13 +3314,12 @@ void QApplication::setStartDragTime(int ms)
     \brief the time in milliseconds that a mouse button must be held down
     before a drag and drop operation will begin
 
-    If you support drag and drop in your application, and want to start a
-    drag and drop operation after the user has held down a mouse button for
-    a certain amount of time, you should use this property's value as the
-    delay.
+    If you support drag and drop in your application, and want to start a drag
+    and drop operation after the user has held down a mouse button for a
+    certain amount of time, you should use this property's value as the delay.
 
-    Qt also uses this delay internally, e.g. in QTextEdit and QLineEdit,
-    for starting a drag.
+    Qt also uses this delay internally, e.g. in QTextEdit and QLineEdit, for
+    starting a drag.
 
     The default value is 500 ms.
 
@@ -3363,9 +3332,9 @@ int QApplication::startDragTime()
 }
 
 /*
-  Sets the distance after which a drag should start to \a l pixels.
+    Sets the distance after which a drag should start to \a l pixels.
 
-  \sa startDragDistance()
+    \sa startDragDistance()
 */
 
 void QApplication::setStartDragDistance(int l)
@@ -3376,15 +3345,14 @@ void QApplication::setStartDragDistance(int l)
 /*!
     \property QApplication::startDragDistance
 
-    If you support drag and drop in your application, and want to start a
-    drag and drop operation after the user has moved the cursor a certain
-    distance with a button held down, you should use this property's value
-    as the minimum distance required.
+    If you support drag and drop in your application, and want to start a drag
+    and drop operation after the user has moved the cursor a certain distance
+    with a button held down, you should use this property's value as the
+    minimum distance required.
 
-    For example, if the mouse position of the click is stored in \c
-    startPos and the current position (e.g. in the mouse move event) is
-    \c currentPos, you can find out if a drag should be started with code
-    like this:
+    For example, if the mouse position of the click is stored in \c startPos
+    and the current position (e.g. in the mouse move event) is \c currentPos,
+    you can find out if a drag should be started with code like this:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 7
 
@@ -3430,14 +3398,14 @@ int QApplication::startDragDistance()
     \sa layoutDirection(), isRightToLeft()
 */
 
-/*! \property QApplication::layoutDirection
-
-   \brief the default layout direction for this application
+/*!
+    \property QApplication::layoutDirection
+    \brief the default layout direction for this application
 
-   On system start-up, the default layout direction depends on the
-   application's language.
+    On system start-up, the default layout direction depends on the
+    application's language.
 
-   \sa QWidget::layoutDirection, isLeftToRight(), isRightToLeft()
+    \sa QWidget::layoutDirection, isLeftToRight(), isRightToLeft()
  */
 
 void QApplication::setLayoutDirection(Qt::LayoutDirection direction)
@@ -3461,11 +3429,12 @@ Qt::LayoutDirection QApplication::layoutDirection()
 }
 
 
-/*! \obsolete
+/*!
+    \obsolete
 
-  Strips out vertical alignment flags and transforms an
-  alignment \a align of Qt::AlignLeft into Qt::AlignLeft or
-  Qt::AlignRight according to the language used.
+    Strips out vertical alignment flags and transforms an alignment \a align
+    of Qt::AlignLeft into Qt::AlignLeft or Qt::AlignRight according to the
+    language used.
 */
 
 #ifdef QT3_SUPPORT
@@ -3481,8 +3450,8 @@ Qt::Alignment QApplication::horizontalAlignment(Qt::Alignment align)
 
     Returns the active application override cursor.
 
-    This function returns 0 if no application cursor has been defined
-    (i.e. the internal cursor stack is empty).
+    This function returns 0 if no application cursor has been defined (i.e. the
+    internal cursor stack is empty).
 
     \sa setOverrideCursor(), restoreOverrideCursor()
 */
@@ -3495,9 +3464,10 @@ QCursor *QApplication::overrideCursor()
 /*!
     Changes the currently active application override cursor to \a cursor.
 
-    This function has no effect if setOverrideCursor() wasn't called.
+    This function has no effect if setOverrideCursor() was not called.
 
-    \sa setOverrideCursor() overrideCursor() restoreOverrideCursor() QWidget::setCursor()
+    \sa setOverrideCursor(), overrideCursor(), restoreOverrideCursor(),
+    QWidget::setCursor()
  */
 void QApplication::changeOverrideCursor(const QCursor &cursor)
 {
@@ -3511,8 +3481,8 @@ void QApplication::changeOverrideCursor(const QCursor &cursor)
 /*!
     \fn void QApplication::setOverrideCursor(const QCursor &cursor, bool replace)
 
-    Use changeOverrideCursor(\a cursor) (if \a replace is true)
-    or setOverrideCursor(\a cursor) (if \a replace is false).
+    Use changeOverrideCursor(\a cursor) (if \a replace is true) or
+    setOverrideCursor(\a cursor) (if \a replace is false).
 */
 
 /*!
@@ -3520,29 +3490,26 @@ void QApplication::changeOverrideCursor(const QCursor &cursor)
     the value that was set to exit() (which is 0 if exit() is called via
     quit()).
 
-    It is necessary to call this function to start event handling. The
-    main event loop receives events from the window system and
-    dispatches these to the application widgets.
+    It is necessary to call this function to start event handling. The main
+    event loop receives events from the window system and dispatches these to
+    the application widgets.
+ 
+    Generally, no user interaction can take place before calling exec(). As a
+    special case, modal widgets like QMessageBox can be used before calling
+    exec(), because modal widgets call exec() to start a local event loop.
 
-    Generally speaking, no user interaction can take place before
-    calling exec(). As a special case, modal widgets like QMessageBox
-    can be used before calling exec(), because modal widgets call
-    exec() to start a local event loop.
-
-    To make your application perform idle processing, i.e. executing a
-    special function whenever there are no pending events, use a
-    QTimer with 0 timeout. More advanced idle processing schemes can
-    be achieved using processEvents().
+    To make your application perform idle processing, i.e., executing a special
+    function whenever there are no pending events, use a QTimer with 0 timeout.
+    More advanced idle processing schemes can be achieved using processEvents().
 
     We recommend that you connect clean-up code to the
-    \l{QCoreApplication::}{aboutToQuit()} signal, instead of putting it in
-    your application's \c{main()} function because on some platforms the
-    QApplication::exec() call may not return. For example, on Windows
-    when the user logs off, the system terminates the process after Qt
-    closes all top-level windows. Hence, there is no guarantee that the
-    application will have time to exit its event loop and execute code at
-    the end of the \c{main()} function after the QApplication::exec()
-    call.
+    \l{QCoreApplication::}{aboutToQuit()} signal, instead of putting it in your
+    application's \c{main()} function because on some platforms the
+    QApplication::exec() call may not return. For example, on Windows when the
+    user logs off, the system terminates the process after Qt closes all
+    top-level windows. Hence, there is no guarantee that the application will
+    have time to exit its event loop and execute code at the end of the
+    \c{main()} function after the QApplication::exec() call.
 
     \sa quitOnLastWindowClosed, quit(), exit(), processEvents(),
         QCoreApplication::exec()
@@ -4090,101 +4057,98 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 
 
 /*!
-  \class QSessionManager
-  \brief The QSessionManager class provides access to the session manager.
-
-  \ingroup application
-  \ingroup environment
-
-  A session manager in a desktop environment (in which Qt GUI
-  applications live) keeps track of a session, which is a group of
-  running applications, each of which has a particular state. The
-  state of an application contains (most notably) the documents the
-  application has open and the position and size of its windows.
-
-  The session manager is used to save the session, e.g. when the
-  machine is shut down, and to restore a session, e.g. when the
-  machine is started up. We recommend that you use QSettings to save
-  an individual application's settings, e.g. window positions,
-  recently used files, etc. When the application is restarted by the
-  session manager, you can restore the settings.
-
-  QSessionManager provides an interface between the application
-  and the session manager so that the program can work well with the
-  session manager. In Qt, session management requests for action are
-  handled by the two virtual functions QApplication::commitData()
-  and QApplication::saveState(). Both provide a reference to a
-  session manager object as argument, to allow the application to
-  communicate with the session manager. The session manager can only
-  be accessed through these functions.
-
-  No user interaction is possible \e unless the application gets
-  explicit permission from the session manager. You ask for permission
-  by calling allowsInteraction() or, if it's really urgent,
-  allowsErrorInteraction(). Qt does not enforce this, but the session
-  manager may.
-
-  You can try to abort the shutdown process by calling cancel(). The
-  default commitData() function does this if some top-level window
-  rejected its closeEvent().
-
-  For sophisticated session managers provided on Unix/X11, QSessionManager
-  offers further possibilities to fine-tune an application's session
-  management behavior: setRestartCommand(), setDiscardCommand(),
-  setRestartHint(), setProperty(), requestPhase2(). See the respective
-  function descriptions for further details.
-
-  \sa QApplication, {Session Management}
+    \class QSessionManager
+    \brief The QSessionManager class provides access to the session manager.
+
+    \ingroup application
+    \ingroup environment
+
+    A session manager in a desktop environment (in which Qt GUI applications
+    live) keeps track of a session, which is a group of running applications,
+    each of which has a particular state. The state of an application contains
+    (most notably) the documents the application has open and the position and
+    size of its windows.
+
+    The session manager is used to save the session, e.g., when the machine is
+    shut down, and to restore a session, e.g., when the machine is started up.
+    We recommend that you use QSettings to save an application's settings,
+    for example, window positions, recently used files, etc. When the
+    application is restarted by the session manager, you can restore the
+    settings.
+
+    QSessionManager provides an interface between the application and the
+    session manager so that the program can work well with the session manager.
+    In Qt, session management requests for action are handled by the two
+    virtual functions QApplication::commitData() and QApplication::saveState().
+    Both provide a reference to a session manager object as argument, to allow
+    the application to communicate with the session manager. The session
+    manager can only be accessed through these functions.
+
+    No user interaction is possible \e unless the application gets explicit
+    permission from the session manager. You ask for permission by calling
+    allowsInteraction() or, if it is really urgent, allowsErrorInteraction().
+    Qt does not enforce this, but the session manager may.
+
+    You can try to abort the shutdown process by calling cancel(). The default
+    commitData() function does this if some top-level window rejected its
+    closeEvent().
+
+    For sophisticated session managers provided on Unix/X11, QSessionManager
+    offers further possibilities to fine-tune an application's session
+    management behavior: setRestartCommand(), setDiscardCommand(),
+    setRestartHint(), setProperty(), requestPhase2(). See the respective
+    function descriptions for further details.
+
+    \sa QApplication, {Session Management}
 */
 
 /*! \enum QSessionManager::RestartHint
 
-  This enum type defines the circumstances under which this
-  application wants to be restarted by the session manager. The
-  current values are
+    This enum type defines the circumstances under which this application wants
+    to be restarted by the session manager. The current values are:
 
-  \value RestartIfRunning  if the application is still running when
-  the session is shut down, it wants to be restarted at the start of
-  the next session.
+    \value  RestartIfRunning    If the application is still running when the
+                                session is shut down, it wants to be restarted
+                                at the start of the next session.
 
-  \value RestartAnyway  the application wants to be started at the
-  start of the next session, no matter what. (This is useful for
-  utilities that run just after startup and then quit.)
+    \value  RestartAnyway       The application wants to be started at the
+                                start of the next session, no matter what.
+                                (This is useful for utilities that run just
+                                after startup and then quit.)
 
-  \value RestartImmediately  the application wants to be started
-  immediately whenever it is not running.
+    \value  RestartImmediately  The application wants to be started immediately
+                                whenever it is not running.
 
-  \value RestartNever  the application does not want to be restarted
-  automatically.
+    \value  RestartNever        The application does not want to be restarted
+                                automatically.
 
-  The default hint is \c RestartIfRunning.
+    The default hint is \c RestartIfRunning.
 */
 
 
 /*!
-  \fn QString QSessionManager::sessionId() const
+    \fn QString QSessionManager::sessionId() const
 
-  Returns the identifier of the current session.
+    Returns the identifier of the current session.
 
-  If the application has been restored from an earlier session, this
-  identifier is the same as it was in that earlier session.
+    If the application has been restored from an earlier session, this
+    identifier is the same as it was in the earlier session.
 
-  \sa sessionKey(), QApplication::sessionId()
- */
+    \sa sessionKey(), QApplication::sessionId()
+*/
 
 /*!
-  \fn QString QSessionManager::sessionKey() const
+    \fn QString QSessionManager::sessionKey() const
 
-  Returns the session key in the current session.
+    Returns the session key in the current session.
 
-  If the application has been restored from an earlier session, this
-  key is the same as it was when the previous session ended.
+    If the application has been restored from an earlier session, this key is
+    the same as it was when the previous session ended.
 
-  The session key changes with every call of commitData() or
-  saveState().
+    The session key changes with every call of commitData() or saveState().
 
-  \sa sessionId(), QApplication::sessionKey()
- */
+    \sa sessionId(), QApplication::sessionKey()
+*/
 
 /*!
     \fn void* QSessionManager::handle() const
@@ -4193,120 +4157,116 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 */
 
 /*!
-  \fn bool QSessionManager::allowsInteraction()
+    \fn bool QSessionManager::allowsInteraction()
 
-  Asks the session manager for permission to interact with the
-  user. Returns true if interaction is permitted; otherwise
-  returns false.
+    Asks the session manager for permission to interact with the user. Returns
+    true if interaction is permitted; otherwise returns false.
 
-  The rationale behind this mechanism is to make it possible to
-  synchronize user interaction during a shutdown. Advanced session
-  managers may ask all applications simultaneously to commit their
-  data, resulting in a much faster shutdown.
+    The rationale behind this mechanism is to make it possible to synchronize
+    user interaction during a shutdown. Advanced session managers may ask all
+    applications simultaneously to commit their data, resulting in a much
+    faster shutdown.
 
-  When the interaction is completed we strongly recommend releasing the
-  user interaction semaphore with a call to release(). This way, other
-  applications may get the chance to interact with the user while your
-  application is still busy saving data. (The semaphore is implicitly
-  released when the application exits.)
+    When the interaction is completed we strongly recommend releasing the user
+    interaction semaphore with a call to release(). This way, other
+    applications may get the chance to interact with the user while your
+    application is still busy saving data. (The semaphore is implicitly
+    released when the application exits.)
 
-  If the user decides to cancel the shutdown process during the
-  interaction phase, you must tell the session manager that this has
-  happened by calling cancel().
+    If the user decides to cancel the shutdown process during the interaction
+    phase, you must tell the session manager that this has happened by calling
+    cancel().
 
-  Here's an example of how an application's QApplication::commitData()
-  might be implemented:
+    Here's an example of how an application's QApplication::commitData() might
+    be implemented:
 
-  \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 8
+    \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 8
 
-  If an error occurred within the application while saving its data,
-  you may want to try allowsErrorInteraction() instead.
+    If an error occurred within the application while saving its data, you may
+    want to try allowsErrorInteraction() instead.
 
-  \sa QApplication::commitData(), release(), cancel()
+    \sa QApplication::commitData(), release(), cancel()
 */
 
 
 /*!
-  \fn bool QSessionManager::allowsErrorInteraction()
+    \fn bool QSessionManager::allowsErrorInteraction()
 
-  Returns true if error interaction is permitted; otherwise returns false.
+    Returns true if error interaction is permitted; otherwise returns false.
 
-  This is similar to allowsInteraction(), but also enables the application
-  to tell the user about any errors that occur. Session managers
-  may give error interaction requests higher priority, which means that it
-  is more likely that an error interaction is permitted. However, you are
-  still not guaranteed that the session manager will allow interaction.
+    This is similar to allowsInteraction(), but also enables the application to
+    tell the user about any errors that occur. Session managers may give error
+    interaction requests higher priority, which means that it is more likely
+    that an error interaction is permitted. However, you are still not
+    guaranteed that the session manager will allow interaction.
 
-  \sa allowsInteraction(), release(), cancel()
+    \sa allowsInteraction(), release(), cancel()
 */
 
 /*!
-  \fn void QSessionManager::release()
+    \fn void QSessionManager::release()
 
-  Releases the session manager's interaction semaphore after an
-  interaction phase.
+    Releases the session manager's interaction semaphore after an interaction
+    phase.
 
-  \sa allowsInteraction(), allowsErrorInteraction()
+    \sa allowsInteraction(), allowsErrorInteraction()
 */
 
 /*!
-  \fn void QSessionManager::cancel()
-
-  Tells the session manager to cancel the shutdown process.  Applications
-  should not call this function without first asking the user.
+    \fn void QSessionManager::cancel()
 
-  \sa allowsInteraction(), allowsErrorInteraction()
+    Tells the session manager to cancel the shutdown process.  Applications
+    should not call this function without asking the user first.
 
+    \sa allowsInteraction(), allowsErrorInteraction()
 */
 
 /*!
-  \fn void QSessionManager::setRestartHint(RestartHint hint)
+    \fn void QSessionManager::setRestartHint(RestartHint hint)
 
-  Sets the application's restart hint to \a hint. On application
-  startup the hint is set to \c RestartIfRunning.
+    Sets the application's restart hint to \a hint. On application startup, the
+    hint is set to \c RestartIfRunning.
 
-  Note that these flags are only hints, a session manager may or may
-  not respect them.
+    \note These flags are only hints, a session manager may or may not respect
+    them.
 
-  We recommend setting the restart hint in QApplication::saveState()
-  because most session managers perform a checkpoint shortly after an
-  application's startup.
+    We recommend setting the restart hint in QApplication::saveState() because
+    most session managers perform a checkpoint shortly after an application's
+    startup.
 
-  \sa restartHint()
+    \sa restartHint()
 */
 
 /*!
-  \fn QSessionManager::RestartHint QSessionManager::restartHint() const
+    \fn QSessionManager::RestartHint QSessionManager::restartHint() const
 
-  Returns the application's current restart hint. The default is
-  \c RestartIfRunning.
+    Returns the application's current restart hint. The default is
+    \c RestartIfRunning.
 
-  \sa setRestartHint()
+    \sa setRestartHint()
 */
 
 /*!
-  \fn void QSessionManager::setRestartCommand(const QStringList& command)
+    \fn void QSessionManager::setRestartCommand(const QStringList& command)
 
-  If the session manager is capable of restoring sessions it will
-  execute \a command in order to restore the application. The command
-  defaults to
+    If the session manager is capable of restoring sessions it will execute
+    \a command in order to restore the application. The command defaults to
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 9
 
-  The \c -session option is mandatory; otherwise QApplication cannot
-  tell whether it has been restored or what the current session
-  identifier is. See QApplication::isSessionRestored() and
-  QApplication::sessionId() for details.
+    The \c -session option is mandatory; otherwise QApplication cannot tell
+    whether it has been restored or what the current session identifier is.
+    See QApplication::isSessionRestored() and QApplication::sessionId() for
+    details.
 
-  If your application is very simple, it may be possible to store the
-  entire application state in additional command line options. This
-  is usually a very bad idea because command lines are often limited
-  to a few hundred bytes. Instead, use QSettings, or temporary files
-  or a database for this purpose. By marking the data with the unique
-  sessionId(), you will be able to restore the application in a future
-  session.
+    If your application is very simple, it may be possible to store the entire
+    application state in additional command line options. This is usually a
+    very bad idea because command lines are often limited to a few hundred
+    bytes. Instead, use QSettings, temporary files, or a database for this
+    purpose. By marking the data with the unique sessionId(), you will be able
+    to restore the application in a future  session.
 
-  \sa restartCommand(), setDiscardCommand(), setRestartHint()
+    \sa restartCommand(), setDiscardCommand(), setRestartHint()
 */
 
 /*!
@@ -4314,8 +4274,7 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 
     Returns the currently set restart command.
 
-    To iterate over the list, you can use the \l foreach
-    pseudo-keyword:
+    To iterate over the list, you can use the \l foreach pseudo-keyword:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 10
 
@@ -4323,11 +4282,11 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 */
 
 /*!
-  \fn void QSessionManager::setDiscardCommand(const QStringList& list)
+    \fn void QSessionManager::setDiscardCommand(const QStringList& list)
 
-  Sets the discard command to the given \a list.
+    Sets the discard command to the given \a list.
 
-  \sa discardCommand(), setRestartCommand()
+    \sa discardCommand(), setRestartCommand()
 */
 
 
@@ -4336,8 +4295,7 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 
     Returns the currently set discard command.
 
-    To iterate over the list, you can use the \l foreach
-    pseudo-keyword:
+    To iterate over the list, you can use the \l foreach pseudo-keyword:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 11
 
@@ -4345,53 +4303,51 @@ bool QApplicationPrivate::notify_helper(QObject *receiver, QEvent * e)
 */
 
 /*!
-  \fn void QSessionManager::setManagerProperty(const QString &name, const QString &value)
-  \overload
+    \fn void QSessionManager::setManagerProperty(const QString &name, const QString &value)
+    \overload
 
-  Low-level write access to the application's identification and state
-  records are kept in the session manager.
+    Low-level write access to the application's identification and state
+    records are kept in the session manager.
 
-  The property called \a name has its value set to the string \a value.
+    The property called \a name has its value set to the string \a value.
 */
 
 /*!
-  \fn void QSessionManager::setManagerProperty(const QString& name,
-                                                const QStringList& value)
+    \fn void QSessionManager::setManagerProperty(const QString& name,
+                                                 const QStringList& value)
 
-  Low-level write access to the application's identification and state
-  record are kept in the session manager.
+    Low-level write access to the application's identification and state record
+    are kept in the session manager.
 
-  The property called \a name has its value set to the string list \a value.
+    The property called \a name has its value set to the string list \a value.
 */
 
 /*!
-  \fn bool QSessionManager::isPhase2() const
+    \fn bool QSessionManager::isPhase2() const
 
-  Returns true if the session manager is currently performing a second
-  session management phase; otherwise returns false.
+    Returns true if the session manager is currently performing a second
+    session management phase; otherwise returns false.
 
-  \sa requestPhase2()
+    \sa requestPhase2()
 */
 
 /*!
-  \fn void QSessionManager::requestPhase2()
+    \fn void QSessionManager::requestPhase2()
 
-  Requests a second session management phase for the application. The
-  application may then return immediately from the
-  QApplication::commitData() or QApplication::saveState() function,
-  and they will be called again once most or all other applications have
-  finished their session management.
+    Requests a second session management phase for the application. The
+    application may then return immediately from the QApplication::commitData()
+    or QApplication::saveState() function, and they will be called again once
+    most or all other applications have finished their session management.
 
-  The two phases are useful for applications such as the X11 window manager
-  that need to store information about another application's windows
-  and therefore have to wait until these applications have completed their
-  respective session management tasks.
+    The two phases are useful for applications such as the X11 window manager
+    that need to store information about another application's windows and
+    therefore have to wait until these applications have completed their
+    respective session management tasks.
 
-  Note that if another application has requested a second phase it
-  may get called before, simultaneously with, or after your
-  application's second phase.
+    \note If another application has requested a second phase it may get called
+    before, simultaneously with, or after your application's second phase.
 
-  \sa isPhase2()
+    \sa isPhase2()
 */
 
 /*****************************************************************************
@@ -4584,15 +4540,14 @@ void QSessionManager::requestPhase2()
 /*!
     \fn bool QApplication::hasGlobalMouseTracking()
 
-    This feature does not exist anymore. This function
-    always returns true in Qt 4.
+    This feature does not exist anymore. This function always returns true
+    in Qt 4.
 */
 
 /*!
     \fn void QApplication::setGlobalMouseTracking(bool dummy)
 
-    This function does nothing in Qt 4. The \a dummy parameter
-    is ignored.
+    This function does nothing in Qt 4. The \a dummy parameter is ignored.
 */
 
 /*!
@@ -4630,15 +4585,14 @@ void QSessionManager::requestPhase2()
 /*!
     \fn const QColor &QApplication::winStyleHighlightColor()
 
-    Use qApp->palette().color(QPalette::Active, QPalette::Highlight)
-    instead.
+    Use qApp->palette().color(QPalette::Active, QPalette::Highlight) instead.
 */
 
 /*!
     \fn QWidget *QApplication::widgetAt(int x, int y, bool child)
 
-    Use the two-argument widgetAt() overload to get the child widget.
-    To get the top-level widget do this:
+    Use the two-argument widgetAt() overload to get the child widget. To get
+    the top-level widget do this:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 12
 */
@@ -4646,8 +4600,8 @@ void QSessionManager::requestPhase2()
 /*!
     \fn QWidget *QApplication::widgetAt(const QPoint &point, bool child)
 
-    Use the single-argument widgetAt() overload to get the child widget.
-    To get the top-level widget do this:
+    Use the single-argument widgetAt() overload to get the child widget. To get
+    the top-level widget do this:
 
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication.cpp 13
 */
@@ -4719,10 +4673,9 @@ void QApplicationPrivate::emitLastWindowClosed()
     Sets whether Qt should use focus navigation suitable for use with a
     minimal keypad.
 
-    If \a enable is true, Qt::Key_Up and Qt::Key_Down are used to
-    change focus.
+    If \a enable is true, Qt::Key_Up and Qt::Key_Down are used to change focus.
 
-    This feature is only available in Qt for Embedded Linux.
+    This feature is available in Qt for Embedded Linux only.
 
     \sa keypadNavigationEnabled()
 */
@@ -4735,7 +4688,8 @@ void QApplication::setKeypadNavigationEnabled(bool enable)
     Returns true if Qt is set to use keypad navigation; otherwise returns
     false. The default is false.
 
-    This feature is only available in Qt for Embedded Linux.
+    This feature is available in Qt for Embedded Linux only.
+
     \sa setKeypadNavigationEnabled()
 */
 bool QApplication::keypadNavigationEnabled()
@@ -4758,12 +4712,12 @@ bool QApplication::keypadNavigationEnabled()
     On Mac OS X, this works more at the application level and will cause the
     application icon to bounce in the dock.
 
-    On Windows this causes the window's taskbar entry to flash for a time. If \a
-    msec is zero, the flashing will stop and the taskbar entry will turn a
+    On Windows this causes the window's taskbar entry to flash for a time. If
+    \a msec is zero, the flashing will stop and the taskbar entry will turn a
     different color (currently orange).
 
-    On X11, this will cause the window to be marked as "demands attention",
-    the window must not be hidden (i.e. not have hide() called on it, but be
+    On X11, this will cause the window to be marked as "demands attention", the
+    window must not be hidden (i.e. not have hide() called on it, but be
     visible in some sort of way) in order for this to work.
 */
 
@@ -4771,18 +4725,16 @@ bool QApplication::keypadNavigationEnabled()
     \property QApplication::cursorFlashTime
     \brief the text cursor's flash (blink) time in milliseconds
 
-    The flash time is the time required to display, invert and
-    restore the caret display. Usually the text cursor is displayed
-    for half the cursor flash time, then hidden for the same amount
-    of time, but this may vary.
+    The flash time is the time required to display, invert and restore the
+    caret display. Usually the text cursor is displayed for half the cursor
+    flash time, then hidden for the same amount of time, but this may vary.
 
-    The default value on X11 is 1000 milliseconds. On Windows, the
-    control panel value is used. Widgets should not cache this value
-    since it may be changed at any time by the user changing the
-    global desktop settings.
+    The default value on X11 is 1000 milliseconds. On Windows, the control
+    panel value is used. Widgets should not cache this value since it may be
+    changed at any time by the user changing the global desktop settings.
 
-    Note that on Microsoft Windows, setting this property sets the
-    cursor flash time for all applications.
+    \note On Microsoft Windows, setting this property sets the cursor flash
+    time for all applications.
 */
 
 /*!
@@ -4790,11 +4742,11 @@ bool QApplication::keypadNavigationEnabled()
     \brief the time limit in milliseconds that distinguishes a double click from two
     consecutive mouse clicks
 
-    The default value on X11 is 400 milliseconds. On Windows and Mac
-    OS X, the operating system's value is used.
+    The default value on X11 is 400 milliseconds. On Windows and Mac OS X, the
+    operating system's value is used.
 
-    On Microsoft Windows, calling this function sets the
-    double click interval for all applications.
+    On Microsoft Windows, calling this function sets the double click interval
+    for all applications.
 */
 
 /*!
@@ -4812,15 +4764,13 @@ bool QApplication::keypadNavigationEnabled()
     \brief the number of lines to scroll a widget, when the
     mouse wheel is rotated.
 
-    If the value exceeds the widget's number of visible lines, the
-    widget should interpret the scroll operation as a single \e{page
-    up} or \e{page down}. If the widget is an \l{QAbstractItemView}
-    {item view class}, then the result of scrolling one \e line
-    depends on the setting of the widget's
-    \l{QAbstractItemView::verticalScrollMode()} {scroll mode}. Scroll
-    one \e line can mean \l{QAbstractItemView::ScrollPerItem} {scroll
-    one item} or \l{QAbstractItemView::ScrollPerPixel} {scroll one
-    pixel}.
+    If the value exceeds the widget's number of visible lines, the widget
+    should interpret the scroll operation as a single \e{page up} or
+    \e{page down}. If the widget is an \l{QAbstractItemView}{item view class},
+    then the result of scrolling one \e line depends on the setting of the
+    widget's \l{QAbstractItemView::verticalScrollMode()}{scroll mode}. Scroll
+    one \e line can mean \l{QAbstractItemView::ScrollPerItem}{scroll one item}
+    or \l{QAbstractItemView::ScrollPerPixel}{scroll one pixel}.
 
     By default, this property has a value of 3.
 */
@@ -4828,11 +4778,11 @@ bool QApplication::keypadNavigationEnabled()
 /*!
     \fn void QApplication::setEffectEnabled(Qt::UIEffect effect, bool enable)
 
-    Enables the UI effect \a effect if \a enable is true, otherwise
-    the effect will not be used.
+    Enables the UI effect \a effect if \a enable is true, otherwise the effect
+    will not be used.
 
-    Note: All effects are disabled on screens running at less than
-    16-bit color depth.
+    \note All effects are disabled on screens running at less than 16-bit color
+    depth.
 
     \sa isEffectEnabled(), Qt::UIEffect, setDesktopSettingsAware()
 */
@@ -4842,11 +4792,11 @@ bool QApplication::keypadNavigationEnabled()
 
     Returns true if \a effect is enabled; otherwise returns false.
 
-    By default, Qt will try to use the desktop settings. Call
-    setDesktopSettingsAware(false) to prevent this.
+    By default, Qt will try to use the desktop settings. To prevent this, call
+    setDesktopSettingsAware(false).
 
-    Note: All effects are disabled on screens running at less than
-    16-bit color depth.
+    \note All effects are disabled on screens running at less than 16-bit color
+    depth.
 
     \sa setEffectEnabled(), Qt::UIEffect
 */
@@ -4854,8 +4804,7 @@ bool QApplication::keypadNavigationEnabled()
 /*!
     \fn QWidget *QApplication::mainWidget()
 
-    Returns the main application widget, or 0 if there is no main
-    widget.
+    Returns the main application widget, or 0 if there is no main widget.
 */
 
 /*!
@@ -4863,19 +4812,17 @@ bool QApplication::keypadNavigationEnabled()
 
     Sets the application's main widget to \a mainWidget.
 
-    In most respects the main widget is like any other widget, except
-    that if it is closed, the application exits. Note that
-    QApplication does \e not take ownership of the \a mainWidget, so
-    if you create your main widget on the heap you must delete it
-    yourself.
+    In most respects the main widget is like any other widget, except that if
+    it is closed, the application exits. QApplication does \e not take
+    ownership of the \a mainWidget, so if you create your main widget on the
+    heap you must delete it yourself.
 
-    You need not have a main widget; connecting lastWindowClosed() to
-    quit() is an alternative.
+    You need not have a main widget; connecting lastWindowClosed() to quit()
+    is an alternative.
 
-    For X11, this function also resizes and moves the main widget
-    according to the \e -geometry command-line option, so you should
-    set the default geometry (using \l QWidget::setGeometry()) before
-    calling setMainWidget().
+    For X11, this function also resizes and moves the main widget according
+    to the \e -geometry command-line option, so you should set the default
+    geometry (using \l QWidget::setGeometry()) before calling setMainWidget().
 
     \sa mainWidget(), exec(), quit()
 */
@@ -4883,8 +4830,8 @@ bool QApplication::keypadNavigationEnabled()
 /*!
     \fn void QApplication::beep()
 
-    Sounds the bell, using the default volume and sound. The function
-    is \e not available in Qt for Embedded Linux.
+    Sounds the bell, using the default volume and sound. The function is \e not
+    available in Qt for Embedded Linux.
 */
 
 /*!
@@ -4892,26 +4839,25 @@ bool QApplication::keypadNavigationEnabled()
 
     Sets the application override cursor to \a cursor.
 
-    Application override cursors are intended for showing the user
-    that the application is in a special state, for example during an
-    operation that might take some time.
+    Application override cursors are intended for showing the user that the
+    application is in a special state, for example during an operation that
+    might take some time.
 
-    This cursor will be displayed in all the application's widgets
-    until restoreOverrideCursor() or another setOverrideCursor() is
-    called.
+    This cursor will be displayed in all the application's widgets until
+    restoreOverrideCursor() or another setOverrideCursor() is called.
 
-    Application cursors are stored on an internal stack.
-    setOverrideCursor() pushes the cursor onto the stack, and
-    restoreOverrideCursor() pops the active cursor off the
-    stack. changeOverrideCursor() changes the curently active
-    application override cursor. Every setOverrideCursor() must
+    Application cursors are stored on an internal stack. setOverrideCursor()
+    pushes the cursor onto the stack, and restoreOverrideCursor() pops the
+    active cursor off the stack. changeOverrideCursor() changes the curently
+    active application override cursor. Every setOverrideCursor() must
     eventually be followed by a corresponding restoreOverrideCursor(),
     otherwise the stack will never be emptied.
 
     Example:
     \snippet doc/src/snippets/code/src_gui_kernel_qapplication_x11.cpp 0
 
-    \sa overrideCursor() restoreOverrideCursor() changeOverrideCursor() QWidget::setCursor()
+    \sa overrideCursor(), restoreOverrideCursor(), changeOverrideCursor(),
+    QWidget::setCursor()
 */
 
 /*!
@@ -4920,9 +4866,8 @@ bool QApplication::keypadNavigationEnabled()
     Undoes the last setOverrideCursor().
 
     If setOverrideCursor() has been called twice, calling
-    restoreOverrideCursor() will activate the first cursor set.
-    Calling this function a second time restores the original widgets'
-    cursors.
+    restoreOverrideCursor() will activate the first cursor set. Calling this
+    function a second time restores the original widgets' cursors.
 
     \sa setOverrideCursor(), overrideCursor()
 */
@@ -4932,9 +4877,9 @@ bool QApplication::keypadNavigationEnabled()
     \relates QApplication
 
     A global pointer referring to the unique application object. It is
-    equivalent to the pointer returned by the
-    QCoreApplication::instance() function except that, in GUI applications,
-    it is a pointer to a QApplication instance.
+    equivalent to the pointer returned by the QCoreApplication::instance()
+    function except that, in GUI applications, it is a pointer to a
+    QApplication instance.
 
     Only one application object can be created.
 
@@ -4946,8 +4891,8 @@ bool QApplication::keypadNavigationEnabled()
 // ************************************************************************
 
 /*!
-    This function replaces the QInputContext instance used by the
-    application with \a inputContext.
+    This function replaces the QInputContext instance used by the application
+    with \a inputContext.
 
     \sa inputContext()
 */
diff --git a/src/gui/styles/qstylesheetstyle.cpp b/src/gui/styles/qstylesheetstyle.cpp
index 2558409..f22cd56 100644
--- a/src/gui/styles/qstylesheetstyle.cpp
+++ b/src/gui/styles/qstylesheetstyle.cpp
@@ -4840,7 +4840,8 @@ int QStyleSheetStyle::pixelMetric(PixelMetric m, const QStyleOption *opt, const
         if (subRule.hasContentsSize())
             return subRule.size().height();
         else if (subRule.hasBox() || subRule.hasBorder()) {
-            return subRule.size(QSize(0, opt->fontMetrics.lineSpacing())).height();
+            QFontMetrics fm = opt ?  opt->fontMetrics : w->fontMetrics();
+            return subRule.size(QSize(0, fm.lineSpacing())).height();
         }
         break;
                             }
diff --git a/src/gui/util/qcompleter.cpp b/src/gui/util/qcompleter.cpp
index 8b07163..aeb7e91 100644
--- a/src/gui/util/qcompleter.cpp
+++ b/src/gui/util/qcompleter.cpp
@@ -824,9 +824,9 @@ void QCompleterPrivate::_q_complete(QModelIndex index, bool highlighted)
     Q_Q(QCompleter);
     QString completion;
 
-    if (!index.isValid())
+    if (!index.isValid() || (index.row() >= proxy->engine->matchCount())) {
         completion = prefix;
-    else {
+    } else {
         QModelIndex si = proxy->mapToSource(index);
         si = si.sibling(si.row(), column); // for clicked()
         completion = q->pathFromIndex(si);
diff --git a/src/gui/widgets/qcombobox.cpp b/src/gui/widgets/qcombobox.cpp
index 9a0c404..c7e2590 100644
--- a/src/gui/widgets/qcombobox.cpp
+++ b/src/gui/widgets/qcombobox.cpp
@@ -61,6 +61,7 @@
 #endif
 #include <private/qcombobox_p.h>
 #include <private/qabstractitemmodel_p.h>
+#include <private/qabstractscrollarea_p.h>
 #include <qdebug.h>
 
 #ifdef Q_WS_X11
@@ -2273,7 +2274,6 @@ void QComboBox::showPopup()
     bool boundToScreen = !window()->testAttribute(Qt::WA_DontShowOnScreen);
 
     const bool usePopup = style->styleHint(QStyle::SH_ComboBox_Popup, &opt, this);
-
     {
         int listHeight = 0;
         int count = 0;
@@ -2305,11 +2305,23 @@ void QComboBox::showPopup()
         listRect.setHeight(listHeight);
     }
 
-    // add the frame size to the height.  (+the spacing for the top and the bottom item)
-    int marginTop, marginBottom;
-    view()->getContentsMargins(0, &marginTop, 0, &marginBottom);
-    listRect.setHeight(listRect.height() + 2*container->spacing()
-                       + marginTop + marginBottom);
+    {
+        // add the spacing for the grid on the top and the bottom;
+        int heightMargin = 2*container->spacing();
+
+        // add the frame of the container
+        int marginTop, marginBottom;
+        container->getContentsMargins(0, &marginTop, 0, &marginBottom);
+        heightMargin += marginTop + marginBottom;
+
+        //add the frame of the view
+        view()->getContentsMargins(0, &marginTop, 0, &marginBottom);
+        marginTop += static_cast<QAbstractScrollAreaPrivate *>(QObjectPrivate::get(view()))->top;
+        marginBottom += static_cast<QAbstractScrollAreaPrivate *>(QObjectPrivate::get(view()))->bottom;
+        heightMargin += marginTop + marginBottom;
+
+        listRect.setHeight(listRect.height() + heightMargin);
+    }
 
     // Add space for margin at top and bottom if the style wants it.
     if (usePopup)
diff --git a/src/gui/widgets/qdockarealayout.cpp b/src/gui/widgets/qdockarealayout.cpp
index 9261c63..4f0ec1e 100644
--- a/src/gui/widgets/qdockarealayout.cpp
+++ b/src/gui/widgets/qdockarealayout.cpp
@@ -579,7 +579,7 @@ void QDockAreaLayoutInfo::fitItems()
         QLayoutStruct &ls = layout_struct_list[j++];
         ls.init();
         ls.empty = false;
-        if (gap || (item.flags & QDockAreaLayoutItem::KeepSize)) {
+        if (item.flags & QDockAreaLayoutItem::KeepSize) {
             ls.minimumSize = ls.maximumSize = ls.sizeHint = item.size;
             ls.expansive = false;
             ls.stretch = 0;
diff --git a/src/gui/widgets/qdockwidget.cpp b/src/gui/widgets/qdockwidget.cpp
index 865b19c..a5be5f8 100644
--- a/src/gui/widgets/qdockwidget.cpp
+++ b/src/gui/widgets/qdockwidget.cpp
@@ -406,10 +406,14 @@ int QDockWidgetLayout::minimumTitleWidth() const
 
     QSize closeSize(0, 0);
     QSize floatSize(0, 0);
-    if (QLayoutItem *item = item_list[CloseButton])
-        closeSize = item->sizeHint();
-    if (QLayoutItem *item = item_list[FloatButton])
-        floatSize = item->sizeHint();
+    if (hasFeature(q, QDockWidget::DockWidgetClosable)) {
+        if (QLayoutItem *item = item_list[CloseButton])
+            closeSize = item->widget()->sizeHint();
+    }
+    if (hasFeature(q, QDockWidget::DockWidgetFloatable)) {
+        if (QLayoutItem *item = item_list[FloatButton])
+            floatSize = item->widget()->sizeHint();
+    }
 
     int titleHeight = this->titleHeight();
 
diff --git a/src/gui/widgets/qmainwindowlayout.cpp b/src/gui/widgets/qmainwindowlayout.cpp
index 768446e..eade633 100644
--- a/src/gui/widgets/qmainwindowlayout.cpp
+++ b/src/gui/widgets/qmainwindowlayout.cpp
@@ -1542,8 +1542,8 @@ bool QMainWindowLayout::plug(QLayoutItem *widgetItem)
     if (!previousPath.isEmpty())
         layoutState.remove(previousPath);
 
+    pluggingWidget = widget;
     if (dockOptions & QMainWindow::AnimatedDocks) {
-        pluggingWidget = widget;
         QRect globalRect = currentGapRect;
         globalRect.moveTopLeft(parentWidget()->mapToGlobal(globalRect.topLeft()));
 #ifndef QT_NO_DOCKWIDGET
@@ -1575,6 +1575,7 @@ bool QMainWindowLayout::plug(QLayoutItem *widgetItem)
 #endif
         currentGapPos.clear();
         updateGapIndicator();
+        pluggingWidget = 0;
     }
 
     return true;