Long live Qt 4.5!

22 files changed, 8506 insertions, 0 deletions

diff --git a/src/qt3support/other/other.pri b/src/qt3support/other/other.pri
new file mode 100644
index 0000000..b2b0e56
--- /dev/null
+++ b/src/qt3support/other/other.pri
@@ -0,0 +1,24 @@
+# Qt compat module
+
+HEADERS +=      other/q3dropsite.h \
+		other/q3dragobject.h \
+                other/q3accel.h \
+                other/q3mimefactory.h \
+		other/q3polygonscanner.h \
+		other/q3process.h \
+		other/q3membuf_p.h \
+		other/q3boxlayout.h \
+		other/q3gridlayout.h
+
+SOURCES +=      other/q3dropsite.cpp \
+		other/q3dragobject.cpp \
+                other/q3accel.cpp \
+                other/q3mimefactory.cpp \
+		other/q3polygonscanner.cpp \
+		other/q3process.cpp \
+		other/q3membuf.cpp
+
+unix:SOURCES += other/q3process_unix.cpp
+win32:SOURCES+= other/q3process_win.cpp
+
+
diff --git a/src/qt3support/other/q3accel.cpp b/src/qt3support/other/q3accel.cpp
new file mode 100644
index 0000000..a570a70
--- /dev/null
+++ b/src/qt3support/other/q3accel.cpp
@@ -0,0 +1,982 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3accel.h"
+
+#include "q3signal.h"
+#include "qapplication.h"
+#include "qwidget.h"
+#include "q3ptrlist.h"
+#include "qwhatsthis.h"
+#include "qpointer.h"
+#include "qstatusbar.h"
+#include "qdockwidget.h"
+#include "qevent.h"
+#include "qkeysequence.h"
+#include "private/qapplication_p.h"
+
+QT_BEGIN_NAMESPACE
+
+using namespace Qt;
+
+/*!
+    \class Q3Accel
+    \brief The Q3Accel class handles keyboard accelerator and shortcut keys.
+
+    \compat
+
+    A keyboard accelerator triggers an action when a certain key
+    combination is pressed. The accelerator handles all keyboard
+    activity for all the children of one top-level widget, so it is
+    not affected by the keyboard focus.
+
+    In most cases, you will not need to use this class directly. Use
+    the QAction class to create actions with accelerators that can be
+    used in both menus and toolbars. If you're only interested in
+    menus use Q3MenuData::insertItem() or Q3MenuData::setAccel() to make
+    accelerators for operations that are also available on menus. Many
+    widgets automatically generate accelerators, such as QAbstractButton,
+    QGroupBox, QLabel (with QLabel::setBuddy()), QMenuBar, and QTabBar.
+    Example:
+    \snippet doc/src/snippets/code/src_qt3support_other_q3accel.cpp 0
+
+    A Q3Accel contains a list of accelerator items that can be
+    manipulated using insertItem(), removeItem(), clear(), key() and
+    findKey().
+
+    Each accelerator item consists of an identifier and a \l
+    QKeySequence. A single key sequence consists of a keyboard code
+    combined with modifiers (Qt::SHIFT, Qt::CTRL, Qt::ALT, or
+    Qt::UNICODE_ACCEL). For example, Qt::CTRL + Qt::Key_P could be a shortcut
+    for printing a document. As an alternative, use Qt::UNICODE_ACCEL with the
+    unicode code point of the character. For example, Qt::UNICODE_ACCEL
+    + 'A' gives the same accelerator as Qt::Key_A.
+
+    When an accelerator key is pressed, the accelerator sends out the
+    signal activated() with a number that identifies this particular
+    accelerator item. Accelerator items can also be individually
+    connected, so that two different keys will activate two different
+    slots (see connectItem() and disconnectItem()).
+
+    The activated() signal is \e not emitted when two or more
+    accelerators match the same key.  Instead, the first matching
+    accelerator sends out the activatedAmbiguously() signal. By
+    pressing the key multiple times, users can navigate between all
+    matching accelerators. Some standard controls like QPushButton and
+    QCheckBox connect the activatedAmbiguously() signal to the
+    harmless setFocus() slot, whereas activated() is connected to a
+    slot invoking the button's action. Most controls, like QLabel and
+    QTabBar, treat activated() and activatedAmbiguously() as
+    equivalent.
+
+    Use setEnabled() to enable or disable all the items in an
+    accelerator, or setItemEnabled() to enable or disable individual
+    items. An item is active only when both the Q3Accel and the item
+    itself are enabled.
+
+    The function setWhatsThis() specifies a help text that appears
+    when the user presses an accelerator key in What's This mode.
+
+    The accelerator will be deleted when \e parent is deleted,
+    and will consume relevant key events until then.
+
+    Please note that the accelerator
+    \snippet doc/src/snippets/code/src_qt3support_other_q3accel.cpp 1
+    can be triggered with both the 'M' key, and with Shift+M,
+    unless a second accelerator is defined for the Shift+M
+    combination.
+
+
+    Example:
+    \snippet doc/src/snippets/code/src_qt3support_other_q3accel.cpp 2
+
+    \sa QKeyEvent QWidget::keyPressEvent()
+    QAbstractButton::setAccel() QLabel::setBuddy() QKeySequence
+*/
+
+
+struct Q3AccelItem {                                // internal accelerator item
+    Q3AccelItem(const QKeySequence &k, int i)
+        { key=k; id=i; enabled=true; signal=0; }
+   ~Q3AccelItem()               { delete signal; }
+    int id;
+    QKeySequence key;
+    bool enabled;
+    Q3Signal *signal;
+    QString whatsthis;
+};
+
+
+typedef Q3PtrList<Q3AccelItem> Q3AccelList; // internal accelerator list
+
+class Q3AccelPrivate {
+public:
+    Q3AccelPrivate(Q3Accel* p);
+    ~Q3AccelPrivate();
+    Q3AccelList aitems;
+    bool enabled;
+    QPointer<QWidget> watch;
+    bool ignorewhatsthis;
+    Q3Accel* parent;
+
+    void activate(Q3AccelItem* item);
+    void activateAmbiguously(Q3AccelItem* item);
+};
+
+class Q3AccelManager {
+public:
+    static Q3AccelManager* self() { return self_ptr ? self_ptr : new Q3AccelManager; }
+    void registerAccel(Q3AccelPrivate* a) { accels.append(a); }
+    void unregisterAccel(Q3AccelPrivate* a) { accels.removeRef(a); if (accels.isEmpty()) delete this; }
+    bool tryAccelEvent(QWidget* w, QKeyEvent* e);
+    bool dispatchAccelEvent(QWidget* w, QKeyEvent* e);
+    bool tryComposeUnicode(QWidget* w, QKeyEvent* e);
+
+private:
+    Q3AccelManager()
+        : currentState(QKeySequence::NoMatch), clash(-1), metaComposeUnicode(false),composedUnicode(0)
+        { setFuncPtr(); self_ptr = this; }
+    ~Q3AccelManager() { self_ptr = 0; }
+    void setFuncPtr();
+
+    bool correctSubWindow(QWidget *w, Q3AccelPrivate* d);
+    QKeySequence::SequenceMatch match(QKeyEvent* e, Q3AccelItem* item, QKeySequence& temp);
+    int translateModifiers(ButtonState state);
+
+    Q3PtrList<Q3AccelPrivate> accels;
+    static Q3AccelManager* self_ptr;
+    QKeySequence::SequenceMatch currentState;
+    QKeySequence intermediate;
+    int clash;
+    bool metaComposeUnicode;
+    int composedUnicode;
+};
+Q3AccelManager* Q3AccelManager::self_ptr = 0;
+
+bool Q_COMPAT_EXPORT qt_tryAccelEvent(QWidget* w, QKeyEvent*  e){
+    return Q3AccelManager::self()->tryAccelEvent(w, e);
+}
+
+bool Q_COMPAT_EXPORT qt_dispatchAccelEvent(QWidget* w, QKeyEvent*  e){
+    return Q3AccelManager::self()->dispatchAccelEvent(w, e);
+}
+
+bool Q_COMPAT_EXPORT qt_tryComposeUnicode(QWidget* w, QKeyEvent*  e){
+    return Q3AccelManager::self()->tryComposeUnicode(w, e);
+}
+
+void Q3AccelManager::setFuncPtr() {
+    if (qApp->d_func()->qt_compat_used)
+        return;
+    QApplicationPrivate *data = static_cast<QApplicationPrivate*>(qApp->d_ptr);
+    data->qt_tryAccelEvent = qt_tryAccelEvent;
+    data->qt_tryComposeUnicode = qt_tryComposeUnicode;
+    data->qt_dispatchAccelEvent = qt_dispatchAccelEvent;
+    data->qt_compat_used = true;
+}
+
+#ifdef Q_WS_MAC
+static bool qt_accel_no_shortcuts = true;
+#else
+static bool qt_accel_no_shortcuts = false;
+#endif
+void Q_COMPAT_EXPORT qt_set_accel_auto_shortcuts(bool b) { qt_accel_no_shortcuts = b; }
+
+/*
+    \internal
+    Returns true if the accel is in the current subwindow, else false.
+*/
+bool Q3AccelManager::correctSubWindow(QWidget* w, Q3AccelPrivate* d) {
+#if !defined (Q_OS_MACX)
+     if (!d->watch || !d->watch->isVisible() || !d->watch->isEnabled())
+#else
+    if (!d->watch || (!d->watch->isVisible() && !d->watch->inherits("QMenuBar")) || !d->watch->isEnabled())
+#endif
+        return false;
+    QWidget* tlw = w->window();
+    QWidget* wtlw = d->watch->window();
+
+    /* if we live in a floating dock window, keep our parent's
+     * accelerators working */
+#ifndef QT_NO_MAINWINDOW
+    if ((tlw->windowType() == Qt::Dialog) && tlw->parentWidget() && qobject_cast<QDockWidget*>(tlw))
+        return tlw->parentWidget()->window() == wtlw;
+
+    if (wtlw  != tlw)
+        return false;
+#endif
+    /* if we live in a MDI subwindow, ignore the event if we are
+       not the active document window */
+    QWidget* sw = d->watch;
+    while (sw && sw->windowType() != Qt::SubWindow)
+        sw = sw->parentWidget(true);
+    if (sw)  { // we are in a subwindow indeed
+        QWidget* fw = w;
+        while (fw && fw != sw)
+            fw = fw->parentWidget(true);
+        if (fw != sw) // focus widget not in our subwindow
+            return false;
+    }
+    return true;
+}
+
+inline int Q3AccelManager::translateModifiers(ButtonState state)
+{
+    int result = 0;
+    if (state & ShiftButton)
+        result |= SHIFT;
+    if (state & ControlButton)
+        result |= CTRL;
+    if (state & MetaButton)
+        result |= META;
+    if (state & AltButton)
+        result |= ALT;
+    return result;
+}
+
+/*
+    \internal
+    Matches the current intermediate key sequence + the latest
+    keyevent, with and AccelItem. Returns Identical,
+    PartialMatch or NoMatch, and fills \a temp with the
+    resulting key sequence.
+*/
+QKeySequence::SequenceMatch Q3AccelManager::match(QKeyEvent *e, Q3AccelItem* item, QKeySequence& temp)
+{
+    QKeySequence::SequenceMatch result = QKeySequence::NoMatch;
+    int index = intermediate.count();
+    temp = intermediate;
+
+    int modifier = translateModifiers(e->state());
+
+    if (e->key() && e->key() != Key_unknown) {
+        int key = e->key()  | modifier;
+        if (e->key() == Key_BackTab) {
+            /*
+            In QApplication, we map shift+tab to shift+backtab.
+            This code here reverts the mapping in a way that keeps
+            backtab and shift+tab accelerators working, in that
+            order, meaning backtab has priority.*/
+            key &= ~SHIFT;
+
+            temp.setKey(key, index);
+            if (QKeySequence::NoMatch != (result = temp.matches(item->key)))
+                return result;
+            if (e->state() & ShiftButton)
+                key |= SHIFT;
+            key = Key_Tab | (key & MODIFIER_MASK);
+            temp.setKey(key, index);
+            if (QKeySequence::NoMatch != (result = temp.matches(item->key)))
+                return result;
+        } else {
+            temp.setKey(key, index);
+            if (QKeySequence::NoMatch != (result = temp.matches(item->key)))
+                return result;
+        }
+
+        if (key == Key_BackTab) {
+            if (e->state() & ShiftButton)
+                key |= SHIFT;
+            temp.setKey(key, index);
+            if (QKeySequence::NoMatch != (result = temp.matches(item->key)))
+                return result;
+        }
+    }
+    if (!e->text().isEmpty()) {
+        temp.setKey((int)e->text()[0].unicode() | UNICODE_ACCEL | modifier, index);
+        result = temp.matches(item->key);
+    }
+    return result;
+}
+
+bool Q3AccelManager::tryAccelEvent(QWidget* w, QKeyEvent* e)
+{
+    if (QKeySequence::NoMatch == currentState) {
+        e->t = QEvent::AccelOverride;
+        e->ignore();
+        QApplication::sendSpontaneousEvent(w, e);
+        if (e->isAccepted())
+            return false;
+    }
+    e->t = QEvent::Accel;
+    e->ignore();
+    QApplication::sendSpontaneousEvent(w, e);
+    return e->isAccepted();
+}
+
+bool Q3AccelManager::tryComposeUnicode(QWidget* w, QKeyEvent* e)
+{
+    if (metaComposeUnicode) {
+        int value = e->key() - Key_0;
+        // Ignore acceloverrides so we don't trigger
+        // accels on keypad when Meta compose is on
+        if ((e->type() == QEvent::AccelOverride) &&
+             (e->state() == Qt::Keypad + Qt::MetaButton)) {
+            e->accept();
+        // Meta compose start/continue
+        } else if ((e->type() == QEvent::KeyPress) &&
+             (e->state() == Qt::Keypad + Qt::MetaButton)) {
+            if (value >= 0 && value <= 9) {
+                composedUnicode *= 10;
+                composedUnicode += value;
+                return true;
+            } else {
+                // Composing interrupted, dispatch!
+                if (composedUnicode) {
+                    QChar ch(composedUnicode);
+                    QString s(ch);
+                    QKeyEvent kep(QEvent::KeyPress, 0, ch.row() ? 0 : ch.cell(), 0, s);
+                    QKeyEvent ker(QEvent::KeyRelease, 0, ch.row() ? 0 : ch.cell(), 0, s);
+                    QApplication::sendEvent(w, &kep);
+                    QApplication::sendEvent(w, &ker);
+                }
+                composedUnicode = 0;
+                return true;
+            }
+        // Meta compose end, dispatch
+        } else if ((e->type() == QEvent::KeyRelease) &&
+                    (e->key() == Key_Meta) &&
+                    (composedUnicode != 0)) {
+            if ((composedUnicode > 0) &&
+                 (composedUnicode < 0xFFFE)) {
+                QChar ch(composedUnicode);
+                QString s(ch);
+                QKeyEvent kep(QEvent::KeyPress, 0, ch.row() ? 0 : ch.cell(), 0, s);
+                QKeyEvent ker(QEvent::KeyRelease, 0, ch.row() ? 0 : ch.cell(), 0, s);
+                QApplication::sendEvent(w, &kep);
+                QApplication::sendEvent(w, &ker);
+            }
+            composedUnicode = 0;
+            return true;
+        }
+    }
+    return false;
+}
+
+/*
+    \internal
+    Checks for possible accelerators, if no widget
+    ate the keypres, or we are in the middle of a
+    partial key sequence.
+*/
+bool Q3AccelManager::dispatchAccelEvent(QWidget* w, QKeyEvent* e)
+{
+#ifndef QT_NO_STATUSBAR
+    // Needs to be declared and used here because of "goto doclash"
+    QStatusBar* mainStatusBar = 0;
+#endif
+
+    // Modifiers can NOT be accelerators...
+    if (e->key() >= Key_Shift &&
+         e->key() <= Key_Alt)
+         return false;
+
+    QKeySequence::SequenceMatch result = QKeySequence::NoMatch;
+    QKeySequence tocheck, partial;
+    Q3AccelPrivate* accel = 0;
+    Q3AccelItem* item = 0;
+    Q3AccelPrivate* firstaccel = 0;
+    Q3AccelItem* firstitem = 0;
+    Q3AccelPrivate* lastaccel = 0;
+    Q3AccelItem* lastitem = 0;
+
+    QKeyEvent pe = *e;
+    int n = -1;
+    int hasShift = (e->state()&Qt::ShiftButton)?1:0;
+    bool identicalDisabled = false;
+    bool matchFound = false;
+    do {
+        accel = accels.first();
+        matchFound = false;
+        while (accel) {
+            if (correctSubWindow(w, accel)) {
+                if (accel->enabled) {
+                    item = accel->aitems.last();
+                    while(item) {
+                        if (QKeySequence::Identical == (result = match(&pe, item, tocheck))) {
+                            if (item->enabled) {
+                                if (!firstaccel) {
+                                    firstaccel = accel;
+                                    firstitem = item;
+                                }
+                                lastaccel = accel;
+                                lastitem = item;
+                                n++;
+                                matchFound = true;
+                                if (n > QMAX(clash,0))
+                                    goto doclash;
+                            } else {
+                                identicalDisabled = true;
+                            }
+                        }
+                        if (item->enabled && QKeySequence::PartialMatch == result) {
+                            partial = tocheck;
+                            matchFound = true;
+                        }
+                        item = accel->aitems.prev();
+                    }
+                } else {
+                    item = accel->aitems.last();
+                    while(item) {
+                        if (QKeySequence::Identical == match(&pe, item, tocheck))
+                            identicalDisabled = true;
+                        item = accel->aitems.prev();
+                    }
+                }
+            }
+            accel = accels.next();
+        }
+        pe = QKeyEvent(QEvent::Accel, pe.key(), pe.ascii(), pe.state()&~Qt::ShiftButton, pe.text());
+    } while (hasShift-- && !matchFound && !identicalDisabled);
+
+#ifndef QT_NO_STATUSBAR
+    mainStatusBar = (QStatusBar*) w->window()->child(0, "QStatusBar");
+#endif
+    if (n < 0) { // no match found
+        currentState = partial.count() ? QKeySequence::PartialMatch : QKeySequence::NoMatch;
+#ifndef QT_NO_STATUSBAR
+        // Only display message if we are, or were, in a partial match
+        if (mainStatusBar && (QKeySequence::PartialMatch == currentState || intermediate.count())) {
+            if (currentState == QKeySequence::PartialMatch) {
+                mainStatusBar->showMessage((QString)partial + QLatin1String(", ..."));
+            } else if (!identicalDisabled) {
+                QString message = Q3Accel::tr("%1, %2 not defined").
+                    arg((QString)intermediate).
+                    arg(QKeySequence::encodeString(e->key() | translateModifiers(e->state())));
+                mainStatusBar->showMessage(message, 2000);
+                // Since we're a NoMatch, reset the clash count
+                clash = -1;
+            } else {
+            	mainStatusBar->clearMessage();
+            }
+        }
+#endif
+
+        bool eatKey = (QKeySequence::PartialMatch == currentState || intermediate.count());
+        intermediate = partial;
+        if (eatKey)
+            e->accept();
+        return eatKey;
+    } else if (n == 0) { // found exactly one match
+        clash = -1; // reset
+#ifndef QT_NO_STATUSBAR
+        if (currentState == QKeySequence::PartialMatch && mainStatusBar)
+                mainStatusBar->clearMessage();
+#endif
+        currentState = QKeySequence::NoMatch; // Free sequence keylock
+        intermediate = QKeySequence();
+        lastaccel->activate(lastitem);
+        e->accept();
+        return true;
+    }
+
+ doclash: // found more than one match
+#ifndef QT_NO_STATUSBAR
+    if (!mainStatusBar) // if "goto doclash", we need to get status bar again.
+        mainStatusBar = (QStatusBar*) w->window()->child(0, "QStatusBar");
+#endif
+
+    QString message = Q3Accel::tr("Ambiguous %1 not handled").arg((QString)tocheck);
+    if (clash >= 0 && n > clash) { // pick next  match
+        intermediate = QKeySequence();
+        currentState = QKeySequence::NoMatch; // Free sequence keylock
+        clash++;
+#ifndef QT_NO_STATUSBAR
+        if (mainStatusBar &&
+             !lastitem->signal &&
+             !(lastaccel->parent->receivers(SIGNAL(activatedAmbiguously(int)))))
+            mainStatusBar->showMessage(message, 2000);
+#endif
+        lastaccel->activateAmbiguously(lastitem);
+    } else { // start (or wrap) with the first matching
+        intermediate = QKeySequence();
+        currentState = QKeySequence::NoMatch; // Free sequence keylock
+        clash = 0;
+#ifndef QT_NO_STATUSBAR
+        if (mainStatusBar &&
+             !firstitem->signal &&
+             !(firstaccel->parent->receivers(SIGNAL(activatedAmbiguously(int)))))
+            mainStatusBar->showMessage(message, 2000);
+#endif
+        firstaccel->activateAmbiguously(firstitem);
+    }
+    e->accept();
+    return true;
+}
+
+Q3AccelPrivate::Q3AccelPrivate(Q3Accel* p)
+    : parent(p)
+{
+    Q3AccelManager::self()->registerAccel(this);
+    aitems.setAutoDelete(true);
+    ignorewhatsthis = false;
+}
+
+Q3AccelPrivate::~Q3AccelPrivate()
+{
+    Q3AccelManager::self()->unregisterAccel(this);
+}
+
+static Q3AccelItem *find_id(Q3AccelList &list, int id)
+{
+    register Q3AccelItem *item = list.first();
+    while (item && item->id != id)
+        item = list.next();
+    return item;
+}
+
+static Q3AccelItem *find_key(Q3AccelList &list, const QKeySequence &key)
+{
+    register Q3AccelItem *item = list.first();
+    while (item && !(item->key == key))
+        item = list.next();
+    return item;
+}
+
+/*!
+    Constructs a Q3Accel object called \a name, with parent \a parent.
+    The accelerator operates on \a parent.
+*/
+
+Q3Accel::Q3Accel(QWidget *parent, const char *name)
+    : QObject(parent, name)
+{
+    d = new Q3AccelPrivate(this);
+    d->enabled = true;
+    d->watch = parent;
+#if defined(QT_CHECK_NULL)
+    if (!d->watch)
+        qWarning("Q3Accel: An accelerator must have a parent or a watch widget");
+#endif
+}
+
+/*!
+    Constructs a Q3Accel object called \a name, that operates on \a
+    watch, and is a child of \a parent.
+
+    This constructor is not needed for normal application programming.
+*/
+Q3Accel::Q3Accel(QWidget* watch, QObject *parent, const char *name)
+    : QObject(parent, name)
+{
+    d = new Q3AccelPrivate(this);
+    d->enabled = true;
+    d->watch = watch;
+#if defined(QT_CHECK_NULL)
+    if (!d->watch)
+        qWarning("Q3Accel: An accelerator must have a parent or a watch widget");
+#endif
+}
+
+/*!
+    Destroys the accelerator object and frees all allocated resources.
+*/
+
+Q3Accel::~Q3Accel()
+{
+    delete d;
+}
+
+
+/*!
+    \fn void Q3Accel::activated(int id)
+
+    This signal is emitted when the user types the shortcut's key
+    sequence. \a id is a number that identifies this particular
+    accelerator item.
+
+    \sa activatedAmbiguously()
+*/
+
+/*!
+    \fn void Q3Accel::activatedAmbiguously(int id)
+
+    This signal is emitted when the user types a shortcut key
+    sequence that is ambiguous. For example, if one key sequence is a
+    "prefix" for another and the user types these keys it isn't clear
+    if they want the shorter key sequence, or if they're about to
+    type more to complete the longer key sequence. \a id is a number
+    that identifies this particular accelerator item.
+
+    \sa activated()
+*/
+
+/*!
+    Returns true if the accelerator is enabled; otherwise returns
+    false.
+
+    \sa setEnabled(), isItemEnabled()
+*/
+
+bool Q3Accel::isEnabled() const
+{
+    return d->enabled;
+}
+
+
+/*!
+    Enables the accelerator if \a enable is true, or disables it if \a
+    enable is false.
+
+    Individual keys can also be enabled or disabled using
+    setItemEnabled(). To work, a key must be an enabled item in an
+    enabled Q3Accel.
+
+    \sa isEnabled(), setItemEnabled()
+*/
+
+void Q3Accel::setEnabled(bool enable)
+{
+    d->enabled = enable;
+}
+
+
+/*!
+    Returns the number of accelerator items in this accelerator.
+*/
+
+uint Q3Accel::count() const
+{
+    return d->aitems.count();
+}
+
+
+static int get_seq_id()
+{
+    static int seq_no = -2;  // -1 is used as return value in findKey()
+    return seq_no--;
+}
+
+/*!
+    Inserts an accelerator item and returns the item's identifier.
+
+    \a key is a key code and an optional combination of SHIFT, CTRL
+    and ALT. \a id is the accelerator item id.
+
+    If \a id is negative, then the item will be assigned a unique
+    negative identifier less than -1.
+
+    \snippet doc/src/snippets/code/src_qt3support_other_q3accel.cpp 3
+*/
+
+int Q3Accel::insertItem(const QKeySequence& key, int id)
+{
+    if (id == -1)
+        id = get_seq_id();
+    d->aitems.insert(0, new Q3AccelItem(key,id));
+    return id;
+}
+
+/*!
+    Removes the accelerator item with the identifier \a id.
+*/
+
+void Q3Accel::removeItem(int id)
+{
+    if (find_id(d->aitems, id))
+        d->aitems.remove();
+}
+
+
+/*!
+    Removes all accelerator items.
+*/
+
+void Q3Accel::clear()
+{
+    d->aitems.clear();
+}
+
+
+/*!
+    Returns the key sequence of the accelerator item with identifier
+    \a id, or an invalid key sequence (0) if the id cannot be found.
+*/
+
+QKeySequence Q3Accel::key(int id)
+{
+    Q3AccelItem *item = find_id(d->aitems, id);
+    return item ? item->key : QKeySequence(0);
+}
+
+
+/*!
+    Returns the identifier of the accelerator item with the key code
+    \a key, or -1 if the item cannot be found.
+*/
+
+int Q3Accel::findKey(const QKeySequence& key) const
+{
+    Q3AccelItem *item = find_key(d->aitems, key);
+    return item ? item->id : -1;
+}
+
+
+/*!
+    Returns true if the accelerator item with the identifier \a id is
+    enabled. Returns false if the item is disabled or cannot be found.
+
+    \sa setItemEnabled(), isEnabled()
+*/
+
+bool Q3Accel::isItemEnabled(int id) const
+{
+    Q3AccelItem *item = find_id(d->aitems, id);
+    return item ? item->enabled : false;
+}
+
+
+/*!
+    Enables the accelerator item with the identifier \a id if \a
+    enable is true, and disables item \a id if \a enable is false.
+
+    To work, an item must be enabled and be in an enabled Q3Accel.
+
+    \sa isItemEnabled(), isEnabled()
+*/
+
+void Q3Accel::setItemEnabled(int id, bool enable)
+{
+    Q3AccelItem *item = find_id(d->aitems, id);
+    if (item)
+        item->enabled = enable;
+}
+
+
+/*!
+    Connects the accelerator item \a id to the slot \a member of \a
+    receiver. Returns true if the connection is successful.
+
+    \snippet doc/src/snippets/code/src_qt3support_other_q3accel.cpp 4
+
+    Of course, you can also send a signal as \a member.
+
+    Normally accelerators are connected to slots which then receive
+    the \c activated(int id) signal with the id of the accelerator
+    item that was activated. If you choose to connect a specific
+    accelerator item using this function, the \c activated() signal is
+    emitted if the associated key sequence is pressed but no \c
+    activated(int id) signal is emitted.
+
+    \sa disconnectItem(), QObject::connect()
+*/
+
+bool Q3Accel::connectItem(int id, const QObject *receiver, const char *member)
+{
+    Q3AccelItem *item = find_id(d->aitems, id);
+    if (item) {
+        if (!item->signal) {
+            item->signal = new Q3Signal;
+            Q_CHECK_PTR(item->signal);
+        }
+        return item->signal->connect(receiver, member);
+    }
+    return false;
+}
+
+/*!
+    Disconnects the accelerator item identified by \a id from
+    the function called \a member in the \a receiver object.
+    Returns true if the connection existed and the disconnect
+    was successful.
+
+    \sa connectItem(), QObject::disconnect()
+*/
+
+bool Q3Accel::disconnectItem(int id, const QObject *receiver,
+                             const char *member)
+{
+    Q3AccelItem *item = find_id(d->aitems, id);
+    if (item && item->signal)
+        return item->signal->disconnect(receiver, member);
+    return false;
+}
+
+void Q3AccelPrivate::activate(Q3AccelItem* item)
+{
+#ifndef QT_NO_WHATSTHIS
+    if (QWhatsThis::inWhatsThisMode() && !ignorewhatsthis) {
+        QWhatsThis::showText(QCursor::pos(), item->whatsthis);
+        return;
+    }
+#endif
+    if (item->signal)
+        item->signal->activate();
+    else
+        emit parent->activated(item->id);
+}
+
+void Q3AccelPrivate::activateAmbiguously(Q3AccelItem* item)
+{
+    if (item->signal)
+        item->signal->activate();
+    else
+        emit parent->activatedAmbiguously(item->id);
+}
+
+
+/*!
+    Returns the shortcut key sequence for \a str, or an invalid key
+    sequence (0) if \a str has no shortcut sequence.
+
+    For example, shortcutKey("E&xit") returns QKeySequence(Qt::ALT +
+    Qt::Key_X), shortcutKey("&Quit") returns QKeySequence(Qt::ALT +
+    Qt::Key_Q), and shortcutKey("Quit") returns QKeySequence().
+*/
+
+QKeySequence Q3Accel::shortcutKey(const QString &str)
+{
+    if(qt_accel_no_shortcuts)
+        return QKeySequence();
+
+    int p = 0;
+    while (p >= 0) {
+        p = str.find(QLatin1Char('&'), p) + 1;
+        if (p <= 0 || p >= (int)str.length())
+            return 0;
+        if (str[p] != QLatin1Char('&')) {
+            QChar c = str[p];
+            if (c.isPrint()) {
+                char ltr = c.upper().latin1();
+                if (ltr >= (char)Key_A && ltr <= (char)Key_Z)
+                    c = QLatin1Char(ltr);
+                else
+                    c = c.lower();
+                return QKeySequence(c.unicode() + ALT + UNICODE_ACCEL);
+            }
+        }
+        p++;
+    }
+    return QKeySequence();
+}
+
+/*! \obsolete
+
+   Creates an accelerator string for the key \a k.
+   For instance CTRL+Key_O gives "Ctrl+O". The "Ctrl" etc.
+   are translated (using QObject::tr()) in the "Q3Accel" context.
+
+   The function is superfluous. Cast the QKeySequence \a k to a
+   QString for the same effect.
+*/
+QString Q3Accel::keyToString(QKeySequence k)
+{
+    return (QString) k;
+}
+
+/*!\obsolete
+
+  Returns an accelerator code for the string \a s. For example
+  "Ctrl+O" gives CTRL+UNICODE_ACCEL+'O'. The strings "Ctrl",
+  "Shift", "Alt" are recognized, as well as their translated
+  equivalents in the "Q3Accel" context (using QObject::tr()). Returns 0
+  if \a s is not recognized.
+
+  This function is typically used with \link QObject::tr() tr
+  \endlink(), so that accelerator keys can be replaced in
+  translations:
+
+  \snippet doc/src/snippets/code/src_qt3support_other_q3accel.cpp 5
+
+  Notice the "File|Open" translator comment. It is by no means
+  necessary, but it provides some context for the human translator.
+
+  The function is superfluous. Construct a QKeySequence from the
+  string \a s for the same effect.
+
+  \sa QObject::tr(), {Internationalization with Qt}
+*/
+QKeySequence Q3Accel::stringToKey(const QString & s)
+{
+    return QKeySequence(s);
+}
+
+
+/*!
+    Sets a What's This help text for the accelerator item \a id to \a
+    text.
+
+    The text will be shown when the application is in What's This mode
+    and the user hits the accelerator key.
+
+    To set What's This help on a menu item (with or without an
+    accelerator key), use Q3MenuData::setWhatsThis().
+
+    \sa whatsThis(), QWhatsThis::inWhatsThisMode(), QAction::setWhatsThis()
+*/
+void Q3Accel::setWhatsThis(int id, const QString& text)
+{
+    Q3AccelItem *item = find_id(d->aitems, id);
+    if (item)
+        item->whatsthis = text;
+}
+
+/*!
+    Returns the What's This help text for the specified item \a id or
+    an empty string if no text has been specified.
+
+    \sa setWhatsThis()
+*/
+QString Q3Accel::whatsThis(int id) const
+{
+
+    Q3AccelItem *item = find_id(d->aitems, id);
+    return item? item->whatsthis : QString();
+}
+
+/*!\internal */
+void Q3Accel::setIgnoreWhatsThis(bool b)
+{
+    d->ignorewhatsthis = b;
+}
+
+/*!\internal */
+bool Q3Accel::ignoreWhatsThis() const
+{
+    return d->ignorewhatsthis;
+}
+
+/*!
+    \fn void Q3Accel::repairEventFilter()
+    \internal
+*/
+
+QT_END_NAMESPACE
diff --git a/src/qt3support/other/q3accel.h b/src/qt3support/other/q3accel.h
new file mode 100644
index 0000000..36adfa7
--- /dev/null
+++ b/src/qt3support/other/q3accel.h
@@ -0,0 +1,110 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3ACCEL_H
+#define Q3ACCEL_H
+
+#include <QtCore/qobject.h>
+#include <QtGui/qkeysequence.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+class Q3AccelPrivate;
+
+class Q_COMPAT_EXPORT Q3Accel : public QObject			// accelerator class
+{
+    Q_OBJECT
+public:
+    Q3Accel( QWidget *parent, const char *name=0 );
+    Q3Accel( QWidget* watch, QObject *parent, const char *name=0 );
+    ~Q3Accel();
+
+    bool isEnabled() const;
+    void setEnabled( bool );
+
+    uint count() const;
+
+    int insertItem( const QKeySequence& key, int id=-1);
+    void removeItem( int id );
+    void clear();
+
+    QKeySequence key( int id );
+    int findKey( const QKeySequence& key ) const;
+
+    bool isItemEnabled( int id ) const;
+    void setItemEnabled( int id, bool enable );
+
+    bool connectItem( int id, const QObject *receiver, const char* member );
+    bool disconnectItem( int id, const QObject *receiver, const char* member );
+
+    void repairEventFilter() {}
+
+    void setWhatsThis( int id, const QString& );
+    QString whatsThis( int id ) const;
+    void setIgnoreWhatsThis( bool );
+    bool ignoreWhatsThis() const;
+
+    static QKeySequence shortcutKey( const QString & );
+    static QString keyToString(QKeySequence k );
+    static QKeySequence stringToKey( const QString & );
+
+Q_SIGNALS:
+    void activated( int id );
+    void activatedAmbiguously( int id );
+
+private:
+    Q3AccelPrivate * d;
+
+private:
+    Q_DISABLE_COPY(Q3Accel)
+    friend class Q3AccelPrivate;
+    friend class Q3AccelManager;
+};
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3ACCEL_H
diff --git a/src/qt3support/other/q3boxlayout.cpp b/src/qt3support/other/q3boxlayout.cpp
new file mode 100644
index 0000000..cc830bf
--- /dev/null
+++ b/src/qt3support/other/q3boxlayout.cpp
@@ -0,0 +1,132 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+    \class Q3HBoxLayout
+    \compat
+
+    \brief The Q3HBoxLayout class lines up widgets horizontally.
+    \sa Q3VBoxLayout
+*/
+
+/*!
+    \fn Q3HBoxLayout::Q3HBoxLayout(QWidget *parent, int margin = 0, int spacing = -1, const char *name = 0)
+
+    Constructs a new top-level horizontal box called \a name, with parent
+    \a parent. The \a margin is the number of pixels between the edge of the
+    widget and its managed children. The \a spacing is the default number of
+    pixels between neighboring children. If \a spacing is -1 the value of margin
+    is used for spacing.
+*/
+
+/*!
+    \fn Q3HBoxLayout::Q3HBoxLayout(QLayout *parentLayout, int spacing = -1, const char *name = 0)
+
+    Constructs a new horizontal box called \a name and adds it to
+    \a parentLayout. The \a spacing is the default number of pixels between
+    neighboring children. If \a spacing is -1, this Q3HBoxLayout will inherit
+    its parent's spacing.
+*/
+
+/*!
+    \fn Q3HBoxLayout::Q3HBoxLayout(int spacing = -1, const char *name = 0)
+
+    Constructs a new horizontal box called \a name. You must add it to another
+    layout. The \a spacing is the default number of pixels between neighboring
+    children. If \a spacing is -1, this QHBoxLayout will inherit its parent's
+    spacing(). 
+*/
+
+/*!
+    \fn Q3HBoxLayout::Q3HBoxLayout()
+    \internal
+*/
+
+/*!
+    \fn Q3HBoxLayout::Q3HBoxLayout(QWidget *parent)
+    \internal
+*/
+
+/*!
+    \class Q3VBoxLayout
+    \compat
+
+    \brief The Q3VBoxLayout class lines up widgets vertically.
+    \sa Q3HBoxLayout
+*/
+
+/*!
+    \fn Q3VBoxLayout::Q3VBoxLayout(QWidget *parent, int margin = 0, int spacing = -1, const char *name = 0)
+
+    Constructs a new top-level vertical box called \a name, with parent
+    \a parent. The \a margin is the number of pixels between the edge of the
+    widget and its managed children. The \a spacing is the default number of
+    pixels between neighboring children. If \a spacing is -1 the value of
+    margin is used for spacing.
+*/
+
+/*!
+    \fn Q3VBoxLayout::Q3VBoxLayout(QLayout *parentLayout, int spacing = -1, const char *name = 0)
+
+    Constructs a new vertical box called \a name and adds it to
+    \a parentLayout. The \a spacing is the default number of pixels between
+    neighboring children. If \a spacing is -1, this Q3VBoxLayout will inherit
+    its parent's spacing().
+*/
+
+/*!
+    \fn Q3VBoxLayout::Q3VBoxLayout(int spacing = -1, const char *name = 0)
+
+    Constructs a new vertical box called \a  name. You must add it to another
+    layout. The \a spacing is the default number of pixels between neighboring
+    children. If \a spacing is -1, this Q3VBoxLayout will inherit its parent's
+    spacing().
+*/
+
+/*!
+    \fn Q3VBoxLayout::Q3VBoxLayout()
+    \internal
+*/
+
+/*!
+    \fn Q3VBoxLayout::Q3VBoxLayout(QWidget *parent)
+    \internal
+*/
diff --git a/src/qt3support/other/q3boxlayout.h b/src/qt3support/other/q3boxlayout.h
new file mode 100644
index 0000000..f0b527a
--- /dev/null
+++ b/src/qt3support/other/q3boxlayout.h
@@ -0,0 +1,122 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3BOXLAYOUT_H
+#define Q3BOXLAYOUT_H
+
+#include <QtGui/qboxlayout.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+class Q3BoxLayout : public QBoxLayout
+{
+public:
+    inline explicit Q3BoxLayout(Direction dir, QWidget *parent = 0)
+        : QBoxLayout(dir, parent) { setMargin(0); setSpacing(0); }
+
+    inline Q3BoxLayout(QWidget *parent, Direction dir, int margin = 0, int spacing = -1,
+                       const char *name = 0)
+        : QBoxLayout(parent, dir, margin, spacing, name) {}
+
+    inline Q3BoxLayout(QLayout *parentLayout, Direction dir, int spacing = -1,
+                       const char *name = 0)
+        : QBoxLayout(parentLayout, dir, spacing, name) { setMargin(0); }
+
+    inline Q3BoxLayout(Direction dir, int spacing, const char *name = 0)
+        : QBoxLayout(dir, spacing, name) { setMargin(0); }
+
+private:
+    Q_DISABLE_COPY(Q3BoxLayout)
+};
+
+class Q3HBoxLayout : public Q3BoxLayout
+{
+public:
+    inline Q3HBoxLayout() : Q3BoxLayout(LeftToRight) {}
+
+    inline explicit Q3HBoxLayout(QWidget *parent) : Q3BoxLayout(LeftToRight, parent) {}
+
+    inline Q3HBoxLayout(QWidget *parent, int margin,
+                 int spacing = -1, const char *name = 0)
+        : Q3BoxLayout(parent, LeftToRight, margin, spacing, name) {}
+
+    inline Q3HBoxLayout(QLayout *parentLayout,
+                 int spacing = -1, const char *name = 0)
+        : Q3BoxLayout(parentLayout, LeftToRight, spacing, name) {}
+
+    inline Q3HBoxLayout(int spacing, const char *name = 0)
+        : Q3BoxLayout(LeftToRight, spacing, name) {}
+
+private:
+    Q_DISABLE_COPY(Q3HBoxLayout)
+};
+
+class Q3VBoxLayout : public Q3BoxLayout
+{
+public:
+    inline Q3VBoxLayout() : Q3BoxLayout(TopToBottom) {}
+
+    inline explicit Q3VBoxLayout(QWidget *parent) : Q3BoxLayout(TopToBottom, parent) {}
+
+    inline Q3VBoxLayout(QWidget *parent, int margin,
+                 int spacing = -1, const char *name = 0)
+        : Q3BoxLayout(parent, TopToBottom, margin, spacing, name) {}
+
+    inline Q3VBoxLayout(QLayout *parentLayout,
+                 int spacing = -1, const char *name = 0)
+        : Q3BoxLayout(parentLayout, TopToBottom, spacing, name) {}
+
+    inline Q3VBoxLayout(int spacing, const char *name = 0)
+        : Q3BoxLayout(TopToBottom, spacing, name) {}
+
+private:
+    Q_DISABLE_COPY(Q3VBoxLayout)
+};
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3BOXLAYOUT_H
diff --git a/src/qt3support/other/q3dragobject.cpp b/src/qt3support/other/q3dragobject.cpp
new file mode 100644
index 0000000..fb57220
--- /dev/null
+++ b/src/qt3support/other/q3dragobject.cpp
@@ -0,0 +1,1577 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qplatformdefs.h"
+
+#ifndef QT_NO_MIME
+
+#include "q3dragobject.h"
+#include "qpixmap.h"
+#include "qevent.h"
+#include "qfile.h"
+#include "qtextcodec.h"
+#include "qapplication.h"
+#include "qpoint.h"
+#include "qwidget.h"
+#include "qbuffer.h"
+#include "qimagereader.h"
+#include "qimagewriter.h"
+#include "qimage.h"
+#include "qregexp.h"
+#include "qdir.h"
+#include "qdrag.h"
+#include "q3strlist.h"
+#include "q3cstring.h"
+
+#include <private/qobject_p.h>
+
+#include <ctype.h>
+#if defined(Q_OS_WINCE)
+#include <winsock.h>
+#include "qfunctions_wince.h"
+#endif
+
+QT_BEGIN_NAMESPACE
+
+static QWidget *last_target = 0;
+
+class QDragMime;
+
+class Q3DragObjectPrivate : public QObjectPrivate
+{
+    Q_DECLARE_PUBLIC(Q3DragObject)
+public:
+    Q3DragObjectPrivate(): hot(0,0),pm_cursor(0) {}
+    QPixmap pixmap;
+    QPoint hot;
+    // store default cursors
+    QPixmap *pm_cursor;
+};
+
+class Q3TextDragPrivate : public Q3DragObjectPrivate
+{
+    Q_DECLARE_PUBLIC(Q3TextDrag)
+public:
+    Q3TextDragPrivate() { setSubType(QLatin1String("plain")); }
+    void setSubType(const QString & st) {
+        subtype = st;
+        fmt = QString(QLatin1String("text/")).toLatin1() + subtype.toLatin1();
+    }
+
+    QString txt;
+    QString subtype;
+    QByteArray fmt;
+};
+
+class Q3StoredDragPrivate : public Q3DragObjectPrivate
+{
+    Q_DECLARE_PUBLIC(Q3StoredDrag)
+public:
+    Q3StoredDragPrivate() {}
+    const char* fmt;
+    QByteArray enc;
+};
+
+class Q3ImageDragPrivate : public Q3DragObjectPrivate
+{
+    Q_DECLARE_PUBLIC(Q3ImageDrag)
+public:
+    QImage img;
+    QList<QByteArray> ofmts;
+};
+
+class QDragMime : public QMimeData
+{
+public:
+    QDragMime(Q3DragObject *parent) : QMimeData(), dragObject(parent) { }
+    ~QDragMime();
+
+    QByteArray data(const QString &mimetype) const;
+    bool hasFormat(const QString &mimetype) const;
+    QStringList formats() const;
+
+    QPointer<Q3DragObject> dragObject;
+};
+
+QDragMime::~QDragMime()
+{
+    delete dragObject;
+}
+QByteArray QDragMime::data(const QString &mimetype) const
+{
+    return dragObject->encodedData(mimetype.latin1());
+}
+
+bool QDragMime::hasFormat(const QString &mimetype) const
+{
+    return dragObject->provides(mimetype.latin1());
+}
+
+QStringList QDragMime::formats() const
+{
+    int i = 0;
+    const char *format;
+    QStringList f;
+    while ((format = dragObject->format(i))) {
+        f.append(QLatin1String(format));
+        ++i;
+    }
+    return f;
+}
+
+/*!
+    Constructs a drag object called \a name with a parent \a
+    dragSource.
+
+    Note that the drag object will be deleted when the \a dragSource is
+    deleted.
+*/
+
+Q3DragObject::Q3DragObject(QWidget * dragSource, const char * name)
+    : QObject(*(new Q3DragObjectPrivate), dragSource)
+{
+    setObjectName(QLatin1String(name));
+}
+
+/*! \internal */
+Q3DragObject::Q3DragObject(Q3DragObjectPrivate &dd, QWidget *dragSource)
+    : QObject(dd, dragSource)
+{
+}
+
+/*!
+    Destroys the drag object, canceling any drag and drop operation in
+    which it is involved.
+*/
+
+Q3DragObject::~Q3DragObject()
+{
+}
+
+#ifndef QT_NO_DRAGANDDROP
+/*!
+    Set the pixmap, \a pm, to display while dragging the object. The
+    platform-specific implementation will use this where it can - so
+    provide a small masked pixmap, and do not assume that the user
+    will actually see it. For example, cursors on Windows 95 are of
+    limited size.
+
+    The \a hotspot is the point on (or off) the pixmap that should be
+    under the cursor as it is dragged. It is relative to the top-left
+    pixel of the pixmap.
+
+    \warning We have seen problems with drag cursors on different
+    graphics hardware and driver software on Windows. Setting the
+    graphics acceleration in the display settings down one tick solved
+    the problems in all cases.
+*/
+void Q3DragObject::setPixmap(QPixmap pm, const QPoint& hotspot)
+{
+    Q_D(Q3DragObject);
+    d->pixmap = pm;
+    d->hot = hotspot;
+#if 0
+    QDragManager *manager = QDragManager::self();
+    if (manager && manager->object == d->data)
+        manager->updatePixmap();
+#endif
+}
+
+/*!
+    \overload
+
+    Uses a hotspot that positions the pixmap below and to the right of
+    the mouse pointer. This allows the user to clearly see the point
+    on the window where they are dragging the data.
+*/
+void Q3DragObject::setPixmap(QPixmap pm)
+{
+    setPixmap(pm,QPoint(-10, -10));
+}
+
+/*!
+    Returns the currently set pixmap, or a null pixmap if none is set.
+
+    \sa QPixmap::isNull()
+*/
+QPixmap Q3DragObject::pixmap() const
+{
+    return d_func()->pixmap;
+}
+
+/*!
+    Returns the currently set pixmap hotspot.
+
+    \sa setPixmap()
+*/
+QPoint Q3DragObject::pixmapHotSpot() const
+{
+    return d_func()->hot;
+}
+
+/*!
+    Starts a drag operation using the contents of this object, using
+    DragDefault mode.
+
+    The function returns true if the caller should delete the original
+    copy of the dragged data (but see target()); otherwise returns
+    false.
+
+    If the drag contains \e references to information (e.g. file names
+    in a Q3UriDrag are references) then the return value should always
+    be ignored, as the target is expected to directly manipulate the
+    content referred to by the drag object. On X11 the return value should
+    always be correct anyway, but on Windows this is not necessarily
+    the case; e.g. the file manager starts a background process to
+    move files, so the source \e{must not} delete the files!
+
+    Note that on Windows the drag operation will start a blocking modal
+    event loop that will not dispatch any QTimers.
+*/
+bool Q3DragObject::drag()
+{
+    return drag(DragDefault);
+}
+
+/*!
+    After the drag completes, this function will return the QWidget
+   which received the drop, or 0 if the data was dropped on another
+    application.
+
+    This can be useful for detecting the case where drag and drop is
+    to and from the same widget.
+*/
+QWidget *Q3DragObject::target()
+{
+    return last_target;
+}
+
+/*!
+    Starts a drag operation using the contents of this object, using
+    \c DragMove mode. Be sure to read the constraints described in
+    drag().
+
+    Returns true if the data was dragged as a \e move, indicating that
+    the caller should remove the original source of the data (the drag
+    object must continue to have a copy); otherwise returns false.
+
+    \sa drag() dragCopy() dragLink()
+*/
+bool Q3DragObject::dragMove()
+{
+    return drag(DragMove);
+}
+
+
+/*!
+    Starts a drag operation using the contents of this object, using
+    \c DragCopy mode. Be sure to read the constraints described in
+    drag().
+
+    \sa drag() dragMove() dragLink()
+*/
+void Q3DragObject::dragCopy()
+{
+    (void)drag(DragCopy);
+}
+
+/*!
+    Starts a drag operation using the contents of this object, using
+    \c DragLink mode. Be sure to read the constraints described in
+    drag().
+
+    \sa drag() dragCopy() dragMove()
+*/
+void Q3DragObject::dragLink()
+{
+    (void)drag(DragLink);
+}
+
+
+/*!
+    \enum Q3DragObject::DragMode
+
+    This enum describes the possible drag modes.
+
+    \value DragDefault     The mode is determined heuristically.
+    \value DragCopy        The data is copied.
+    \value DragMove        The data is moved.
+    \value DragLink        The data is linked.
+    \value DragCopyOrMove  The user chooses the mode by using the
+                           \key{Shift} key to switch from the default
+                           copy mode to move mode.
+*/
+
+
+/*!
+    \overload
+    Starts a drag operation using the contents of this object.
+
+    At this point, the object becomes owned by Qt, not the
+    application. You should not delete the drag object or anything it
+    references. The actual transfer of data to the target application
+    will be done during future event processing - after that time the
+    drag object will be deleted.
+
+    Returns true if the dragged data was dragged as a \e move,
+    indicating that the caller should remove the original source of
+    the data (the drag object must continue to have a copy); otherwise
+    returns false.
+
+    The \a mode specifies the drag mode (see
+    \l{Q3DragObject::DragMode}.) Normally one of the simpler drag(),
+    dragMove(), or dragCopy() functions would be used instead.
+*/
+bool Q3DragObject::drag(DragMode mode)
+{
+    Q_D(Q3DragObject);
+    QDragMime *data = new QDragMime(this);
+    int i = 0;
+    const char *fmt;
+    while ((fmt = format(i))) {
+        data->setData(QLatin1String(fmt), encodedData(fmt));
+        ++i;
+    }
+
+    QDrag *drag = new QDrag(qobject_cast<QWidget *>(parent()));
+    drag->setMimeData(data);
+    drag->setPixmap(d->pixmap);
+    drag->setHotSpot(d->hot);
+
+    Qt::DropActions allowedOps;
+    Qt::DropAction defaultOp = Qt::IgnoreAction;
+    switch(mode) {
+    default:
+    case DragDefault:
+    case DragCopyOrMove:
+        allowedOps = Qt::CopyAction|Qt::MoveAction;
+        defaultOp = Qt::IgnoreAction;
+        break;
+    case DragCopy:
+        allowedOps = Qt::CopyAction;
+        defaultOp = Qt::CopyAction;
+        break;
+    case DragMove:
+        allowedOps = Qt::MoveAction;
+        defaultOp = Qt::MoveAction;
+        break;
+    case DragLink:
+        allowedOps = Qt::LinkAction;
+        defaultOp = Qt::LinkAction;
+        break;
+    }
+    bool retval = (drag->exec(allowedOps, defaultOp) == Qt::MoveAction);
+    last_target = drag->target();
+
+    return retval;
+}
+
+#endif
+
+
+/*!
+    Returns a pointer to the widget where this object originated (the drag
+    source).
+*/
+
+QWidget * Q3DragObject::source()
+{
+    if (parent() && parent()->isWidgetType())
+        return (QWidget *)parent();
+    else
+        return 0;
+}
+
+
+/*!
+    \class Q3DragObject
+
+    \brief The Q3DragObject class encapsulates MIME-based data
+    transfer.
+
+    \compat
+
+    Q3DragObject is the base class for all data that needs to be
+    transferred between and within applications, both for drag and
+    drop and for the clipboard.
+
+    See the \link dnd.html Drag and drop documentation\endlink for an
+    overview of how to provide drag and drop in your application.
+
+    See the QClipboard documentation for an overview of how to provide
+    cut and paste in your application.
+
+    The drag() function is used to start a drag operation. You can
+    specify the \l DragMode in the call or use one of the convenience
+    functions dragCopy(), dragMove(), or dragLink(). The drag source
+    where the data originated is retrieved with source(). If the data
+    was dropped on a widget within the application, target() will
+    return a pointer to that widget. Specify the pixmap to display
+    during the drag with setPixmap().
+*/
+
+static
+void stripws(QByteArray& s)
+{
+    int f;
+    while ((f = s.indexOf(' ')) >= 0)
+        s.remove(f,1);
+}
+
+/*!
+    \class Q3TextDrag
+
+    \brief The Q3TextDrag class is a drag and drop object for
+    transferring plain and Unicode text.
+
+    \compat
+
+    Plain text is passed in a QString which may contain multiple lines
+    (i.e. may contain newline characters). The drag target will receive
+    the newlines according to the runtime environment, e.g. LF on Unix,
+    and CRLF on Windows.
+
+    Qt provides no built-in mechanism for delivering only a single-line.
+
+    For more information about drag and drop, see the Q3DragObject class
+    and the \link dnd.html drag and drop documentation\endlink.
+*/
+
+
+/*!
+    Constructs a text drag object with the given \a name, and sets its data
+    to \a text. The \a dragSource is the widget that the drag operation started
+    from.
+*/
+
+Q3TextDrag::Q3TextDrag(const QString &text, QWidget * dragSource, const char * name)
+    : Q3DragObject(*new Q3TextDragPrivate, dragSource)
+{
+    setObjectName(QLatin1String(name));
+    setText(text);
+}
+
+
+/*!
+    Constructs a default text drag object with the given \a name.
+    The \a dragSource is the widget that the drag operation started from.
+*/
+
+Q3TextDrag::Q3TextDrag(QWidget * dragSource, const char * name)
+    : Q3DragObject(*(new Q3TextDragPrivate), dragSource)
+{
+    setObjectName(QLatin1String(name));
+}
+
+/*! \internal */
+Q3TextDrag::Q3TextDrag(Q3TextDragPrivate &dd, QWidget *dragSource)
+    : Q3DragObject(dd, dragSource)
+{
+
+}
+
+/*!
+    Destroys the text drag object.
+*/
+Q3TextDrag::~Q3TextDrag()
+{
+
+}
+
+/*!
+    \fn void Q3TextDrag::setSubtype(const QString &subtype)
+
+    Sets the MIME \a subtype of the text being dragged. The default subtype
+    is "plain", so the default MIME type of the text is "text/plain".
+    You might use this to declare that the text is "text/html" by calling
+    setSubtype("html").
+*/
+void Q3TextDrag::setSubtype(const QString & st)
+{
+    d_func()->setSubType(st);
+}
+
+/*!
+    Sets the \a text to be dragged. You will need to call this if you did
+    not pass the text during construction.
+*/
+void Q3TextDrag::setText(const QString &text)
+{
+    d_func()->txt = text;
+}
+
+
+/*!
+    \reimp
+*/
+const char * Q3TextDrag::format(int i) const
+{
+    if (i > 0)
+        return 0;
+    return d_func()->fmt.constData();
+}
+
+QTextCodec* qt_findcharset(const QByteArray& mimetype)
+{
+    int i=mimetype.indexOf("charset=");
+    if (i >= 0) {
+        QByteArray cs = mimetype.mid(i+8);
+        stripws(cs);
+        i = cs.indexOf(';');
+        if (i >= 0)
+            cs = cs.left(i);
+        // win98 often has charset=utf16, and we need to get the correct codec for
+        // it to be able to get Unicode text drops.
+        if (cs == "utf16")
+            cs = "ISO-10646-UCS-2";
+        // May return 0 if unknown charset
+        return QTextCodec::codecForName(cs);
+    }
+    // no charset=, use locale
+    return QTextCodec::codecForName("utf-8");
+}
+
+static QTextCodec *codecForHTML(const QByteArray &ba)
+{
+    // determine charset
+    int mib = 0;
+    int pos;
+    QTextCodec *c = 0;
+
+    if (ba.size() > 1 && (((uchar)ba[0] == 0xfe && (uchar)ba[1] == 0xff)
+                          || ((uchar)ba[0] == 0xff && (uchar)ba[1] == 0xfe))) {
+        mib = 1015; // utf16
+    } else if (ba.size() > 2
+               && (uchar)ba[0] == 0xef
+               && (uchar)ba[1] == 0xbb
+               && (uchar)ba[2] == 0xbf) {
+        mib = 106; // utf-8
+    } else {
+        pos = 0;
+        while ((pos = ba.indexOf('<', pos)) != -1) {
+            int end = ba.indexOf('>', pos+1);
+            if (end == -1)
+                break;
+            const QString str(QString::fromLatin1(ba.mid(pos, end-pos)));
+            if (str.contains(QLatin1String("meta http-equiv="), Qt::CaseInsensitive)) {
+                pos = str.indexOf(QLatin1String("charset="), 0, Qt::CaseInsensitive) + int(strlen("charset="));
+                if (pos != -1) {
+                    int pos2 = ba.indexOf('\"', pos+1);
+                    QByteArray cs = ba.mid(pos, pos2-pos);
+                    c = QTextCodec::codecForName(cs);
+                    if (c)
+                        return c;
+                }
+            }
+            pos = end;
+        }
+    }
+    if (mib)
+        c = QTextCodec::codecForMib(mib);
+
+    return c;
+}
+
+static
+QTextCodec* findcodec(const QMimeSource* e)
+{
+    QTextCodec* r = 0;
+    const char* f;
+    int i;
+    for (i=0; (f=e->format(i)); i++) {
+        bool html = !qstrnicmp(f, "text/html", 9);
+        if (html)
+            r = codecForHTML(e->encodedData(f));
+        if (!r)
+            r = qt_findcharset(QByteArray(f).toLower());
+        if (r)
+            return r;
+    }
+    return 0;
+}
+
+
+
+/*!
+    \reimp
+*/
+QByteArray Q3TextDrag::encodedData(const char* mime) const
+{
+    Q_D(const Q3TextDrag);
+    if (mime != d->fmt)
+        return QByteArray();
+    return d->txt.toUtf8();
+}
+
+/*!
+    \fn bool Q3TextDrag::canDecode(const QMimeSource *source)
+
+    Returns true if the information in the MIME \a source can be decoded
+    into a QString; otherwise returns false.
+
+    \sa decode()
+*/
+bool Q3TextDrag::canDecode(const QMimeSource* e)
+{
+    const char* f;
+    for (int i=0; (f=e->format(i)); i++) {
+        if (0==qstrnicmp(f,"text/",5)) {
+            return findcodec(e) != 0;
+        }
+    }
+    return false;
+}
+
+/*!
+    \fn bool Q3TextDrag::decode(const QMimeSource *source, QString &string, QString &subtype)
+
+    \overload
+
+    Attempts to decode the dropped information in the MIME \a source into
+    the \a string given.
+    Returns true if successful; otherwise returns false. If \a subtype
+    is null, any text subtype is accepted; otherwise only the
+    specified \a subtype is accepted.
+
+    \sa canDecode()
+*/
+bool Q3TextDrag::decode(const QMimeSource* e, QString& str, QString& subtype)
+{
+    if(!e)
+        return false;
+
+    const char* mime;
+    for (int i=0; (mime = e->format(i)); i++) {
+        if (0==qstrnicmp(mime,"text/",5)) {
+            QByteArray m(mime);
+            m = m.toLower();
+            int semi = m.indexOf(';');
+            if (semi < 0)
+                semi = m.length();
+            QString foundst(QString::fromLatin1(m.mid(5,semi-5)));
+            if (subtype.isNull() || foundst == subtype) {
+                bool html = !qstrnicmp(mime, "text/html", 9);
+                QTextCodec* codec = 0;
+                if (html)
+                    // search for the charset tag in the HTML
+                    codec = codecForHTML(e->encodedData(mime));
+                if (!codec)
+                    codec = qt_findcharset(m);
+                if (codec) {
+                    QByteArray payload;
+
+                    payload = e->encodedData(mime);
+                    if (payload.size()) {
+                        int l;
+                        if (codec->mibEnum() != 1015) {
+                            // length is at NUL or payload.size()
+                            l = 0;
+                            while (l < (int)payload.size() && payload[l])
+                                l++;
+                        } else {
+                            l = payload.size();
+                        }
+
+                        str = codec->toUnicode(payload,l);
+
+                        if (subtype.isNull())
+                            subtype = foundst;
+
+                        return true;
+                    }
+                }
+            }
+        }
+    }
+    return false;
+}
+
+/*!
+    \fn bool Q3TextDrag::decode(const QMimeSource *source, QString &string)
+
+    Attempts to decode the dropped information in the MIME \a source into
+    the \a string given.
+    Returns true if successful; otherwise returns false.
+
+    \sa canDecode()
+*/
+bool Q3TextDrag::decode(const QMimeSource* e, QString& str)
+{
+    QString st;
+    return decode(e, str, st);
+}
+
+
+/*
+  Q3ImageDrag could use an internal MIME type for communicating QPixmaps
+  and QImages rather than always converting to raw data. This is available
+  for that purpose and others. It is not currently used.
+*/
+
+/*!
+    \class Q3ImageDrag
+
+    \brief The Q3ImageDrag class provides a drag and drop object for
+    transferring images.
+
+    \compat
+
+    Images are offered to the receiving application in multiple
+    formats, determined by Qt's output formats.
+*/
+
+/*!
+    Constructs an image drag object with the given \a name, and sets its
+    data to \a image. The \a dragSource is the widget that the drag operation
+    started from.
+*/
+
+Q3ImageDrag::Q3ImageDrag(QImage image,
+                        QWidget * dragSource, const char * name)
+    : Q3DragObject(*(new Q3ImageDragPrivate), dragSource)
+{
+    setObjectName(QLatin1String(name));
+    setImage(image);
+}
+
+/*!
+    Constructs a default image drag object with the given \a name.
+    The \a dragSource is the widget that the drag operation started from.
+*/
+
+Q3ImageDrag::Q3ImageDrag(QWidget * dragSource, const char * name)
+    : Q3DragObject(*(new Q3ImageDragPrivate), dragSource)
+{
+    setObjectName(QLatin1String(name));
+}
+
+/*! \internal */
+Q3ImageDrag::Q3ImageDrag(Q3ImageDragPrivate &dd, QWidget *dragSource)
+    : Q3DragObject(dd, dragSource)
+{
+}
+
+/*!
+    Destroys the image drag object.
+*/
+
+Q3ImageDrag::~Q3ImageDrag()
+{
+    // nothing
+}
+
+
+/*!
+    Sets the \a image to be dragged. You will need to call this if you did
+    not pass the image during construction.
+*/
+void Q3ImageDrag::setImage(QImage image)
+{
+    Q_D(Q3ImageDrag);
+    d->img = image;
+    QList<QByteArray> formats = QImageWriter::supportedImageFormats();
+    formats.removeAll("PBM"); // remove non-raw PPM
+    if (image.depth()!=32) {
+        // BMP better than PPM for paletted images
+        if (formats.removeAll("BMP")) // move to front
+            formats.insert(0,"BMP");
+    }
+    // PNG is best of all
+    if (formats.removeAll("PNG")) // move to front
+        formats.insert(0,"PNG");
+
+    for(int i = 0; i < formats.count(); i++) {
+        QByteArray format("image/");
+        format += formats.at(i);
+        format = format.toLower();
+        if (format == "image/pbmraw")
+            format = "image/ppm";
+        d->ofmts.append(format);
+    }
+    d->ofmts.append("application/x-qt-image");
+}
+
+/*!
+    \reimp
+*/
+const char * Q3ImageDrag::format(int i) const
+{
+    Q_D(const Q3ImageDrag);
+    return i < d->ofmts.count() ? d->ofmts.at(i).data() : 0;
+}
+
+/*!
+    \reimp
+*/
+QByteArray Q3ImageDrag::encodedData(const char* fmt) const
+{
+    Q_D(const Q3ImageDrag);
+    QString imgFormat(fmt);
+    if (imgFormat == QLatin1String("application/x-qt-image"))
+        imgFormat = QLatin1String("image/PNG");
+
+    if (imgFormat.startsWith("image/")){
+        QByteArray f(imgFormat.mid(6).toAscii());
+        QByteArray dat;
+        QBuffer w(&dat);
+        w.open(QIODevice::WriteOnly);
+        QImageWriter writer(&w, f.toUpper());
+        if (!writer.write(d->img))
+            return QByteArray();
+        w.close();
+        return dat;
+    } else {
+        return QByteArray();
+    }
+}
+
+/*!
+    \fn bool Q3ImageDrag::canDecode(const QMimeSource *source)
+
+    Returns true if the information in the MIME \a source can be decoded
+    into an image; otherwise returns false.
+
+    \sa decode()
+*/
+bool Q3ImageDrag::canDecode(const QMimeSource* e)
+{
+    return e->provides("application/x-qt-image");
+}
+
+/*!
+    \fn bool Q3ImageDrag::decode(const QMimeSource *source, QImage &image)
+
+    Decode the dropped information in the MIME \a source into the \a image.
+    Returns true if successful; otherwise returns false.
+
+    \sa canDecode()
+*/
+bool Q3ImageDrag::decode(const QMimeSource* e, QImage& img)
+{
+    if (!e)
+        return false;
+
+    QByteArray payload = e->encodedData("application/x-qt-image");
+    if (payload.isEmpty())
+        return false;
+
+    img.loadFromData(payload);
+    if (img.isNull())
+        return false;
+
+    return true;
+}
+
+/*!
+    \fn bool Q3ImageDrag::decode(const QMimeSource *source, QPixmap &pixmap)
+
+    \overload
+
+    Decodes the dropped information in the MIME \a source into the \a pixmap.
+    Returns true if successful; otherwise returns false.
+
+    This is a convenience function that converts the information to a QPixmap
+    via a QImage.
+
+    \sa canDecode()
+*/
+bool Q3ImageDrag::decode(const QMimeSource* e, QPixmap& pm)
+{
+    if (!e)
+        return false;
+
+    QImage img;
+    // We avoid dither, since the image probably came from this display
+    if (decode(e, img)) {
+        pm = QPixmap::fromImage(img, Qt::AvoidDither);
+        if (pm.isNull())
+            return false;
+
+        return true;
+    }
+    return false;
+}
+
+
+
+
+/*!
+    \class Q3StoredDrag
+    \brief The Q3StoredDrag class provides a simple stored-value drag object for arbitrary MIME data.
+
+    \compat
+
+    When a block of data has only one representation, you can use a
+    Q3StoredDrag to hold it.
+
+    For more information about drag and drop, see the Q3DragObject
+    class and the \link dnd.html drag and drop documentation\endlink.
+*/
+
+/*!
+    Constructs a Q3StoredDrag. The \a dragSource and \a name are passed
+    to the Q3DragObject constructor, and the format is set to \a
+    mimeType.
+
+    The data will be unset. Use setEncodedData() to set it.
+*/
+Q3StoredDrag::Q3StoredDrag(const char* mimeType, QWidget * dragSource, const char * name) :
+    Q3DragObject(*new Q3StoredDragPrivate, dragSource)
+{
+    Q_D(Q3StoredDrag);
+    setObjectName(QLatin1String(name));
+    d->fmt = qstrdup(mimeType);
+}
+
+/*! \internal */
+Q3StoredDrag::Q3StoredDrag(Q3StoredDragPrivate &dd, const char* mimeType, QWidget * dragSource)
+    : Q3DragObject(dd, dragSource)
+{
+    d_func()->fmt = qstrdup(mimeType);
+}
+
+/*!
+    Destroys the drag object.
+*/
+Q3StoredDrag::~Q3StoredDrag()
+{
+    delete [] (char*)d_func()->fmt;
+}
+
+/*!
+    \reimp
+*/
+const char * Q3StoredDrag::format(int i) const
+{
+    if (i==0)
+        return d_func()->fmt;
+    else
+        return 0;
+}
+
+
+/*!
+    \fn void Q3StoredDrag::setEncodedData(const QByteArray &data)
+
+    Sets the encoded \a data of this drag object. The encoded data is
+    delivered to drop sites; it must be in a strictly defined and portable
+    format.
+
+    The drag object can't be dropped (by the user) until this function
+    has been called.
+*/
+
+void Q3StoredDrag::setEncodedData(const QByteArray & encodedData)
+{
+    d_func()->enc = encodedData;
+}
+
+/*!
+    \fn QByteArray Q3StoredDrag::encodedData(const char *format) const
+
+    Returns the stored data in the \a format given.
+
+    \sa setEncodedData()
+*/
+QByteArray Q3StoredDrag::encodedData(const char* m) const
+{
+    if (!qstricmp(m, d_func()->fmt))
+        return d_func()->enc;
+    else
+        return QByteArray();
+}
+
+
+/*!
+    \class Q3UriDrag
+    \brief The Q3UriDrag class provides a drag object for a list of URI references.
+
+    \compat
+
+    URIs are a useful way to refer to files that may be distributed
+    across multiple machines. A URI will often refer to a file on a
+    machine local to both the drag source and the drop target, so the
+    URI can be equivalent to passing a file name but is more
+    extensible.
+
+    Use URIs in Unicode form so that the user can comfortably edit and
+    view them. For use in HTTP or other protocols, use the correctly
+    escaped ASCII form.
+
+    You can convert a list of file names to file URIs using
+    setFileNames(), or into human-readable form with setUnicodeUris().
+
+    Static functions are provided to convert between filenames and
+    URIs; e.g. uriToLocalFile() and localFileToUri(). Static functions
+    are also provided to convert URIs to and from human-readable form;
+    e.g. uriToUnicodeUri() and unicodeUriToUri().
+    You can also decode URIs from a MIME source into a list with
+    decodeLocalFiles() and decodeToUnicodeUris().
+*/
+
+/*!
+    Constructs an object to drag the list of \a uris.
+    The \a dragSource and \a name are passed to the Q3StoredDrag constructor.
+
+    Note that URIs are always in escaped UTF8 encoding.
+*/
+Q3UriDrag::Q3UriDrag(const Q3StrList &uris, QWidget * dragSource, const char * name) :
+    Q3StoredDrag("text/uri-list", dragSource)
+{
+    setObjectName(QLatin1String(name));
+    setUris(uris);
+}
+
+/*!
+    Constructs an object to drag with the given \a name.
+    You must call setUris() before you start the drag().
+    Both the \a dragSource and the \a name are passed to the Q3StoredDrag
+    constructor.
+*/
+Q3UriDrag::Q3UriDrag(QWidget * dragSource, const char * name) :
+    Q3StoredDrag("text/uri-list", dragSource)
+{
+    setObjectName(QLatin1String(name));
+}
+#endif
+
+/*!
+    Destroys the URI drag object.
+*/
+Q3UriDrag::~Q3UriDrag()
+{
+}
+
+/*!
+    \fn void Q3UriDrag::setUris(const QList<QByteArray> &list)
+
+    Changes the \a list of URIs to be dragged.
+
+    Note that URIs are always in escaped UTF8 encoding.
+*/
+void Q3UriDrag::setUris(const QList<QByteArray> &uris)
+{
+    QByteArray a;
+    int c = 0;
+    int i;
+    int count = uris.count();
+    for (i = 0; i < count; ++i)
+        c += uris.at(i).size() + 2; //length + \r\n
+    a.reserve(c+1);
+    for (i = 0; i < count; ++i) {
+        a.append(uris.at(i));
+        a.append("\r\n");
+    }
+    a[c] = 0;
+    setEncodedData(a);
+}
+
+
+/*!
+    \fn bool Q3UriDrag::canDecode(const QMimeSource *source)
+
+    Returns true if decode() can decode the MIME \a source; otherwise
+    returns false.
+*/
+bool Q3UriDrag::canDecode(const QMimeSource* e)
+{
+    return e->provides("text/uri-list");
+}
+
+/*!
+    \fn bool Q3UriDrag::decode(const QMimeSource* source, Q3StrList& list)
+
+    Decodes URIs from the MIME \a source, placing the result in the \a list.
+    The list is cleared before any items are inserted.
+
+    Returns true if the MIME \a source contained a valid list of URIs;
+    otherwise returns false.
+*/
+bool Q3UriDrag::decode(const QMimeSource* e, Q3StrList& l)
+{
+    QByteArray payload = e->encodedData("text/uri-list");
+    if (payload.size()) {
+        l.clear();
+        l.setAutoDelete(true);
+        uint c=0;
+        const char* data = payload.data();
+        while ((int)c < payload.size() && data[c]) {
+            uint f = c;
+            // Find line end
+            while ((int)c < payload.size() && data[c] && data[c]!='\r'
+                   && data[c] != '\n')
+                c++;
+            Q3CString s(data+f,c-f+1);
+            if (s[0] != '#') // non-comment?
+                l.append(s);
+            // Skip junk
+            while ((int)c < payload.size() && data[c] &&
+                   (data[c]=='\n' || data[c]=='\r'))
+                c++;
+        }
+        return true;
+    }
+    return false;
+}
+
+static uint htod(int h)
+{
+    if (isdigit(h))
+        return h - '0';
+    return tolower(h) - 'a' + 10;
+}
+
+/*!
+  \fn Q3UriDrag::setFilenames(const QStringList &list)
+
+  \obsolete
+
+  Sets the filename's in the drag object to those in the given \a
+  list.
+
+  Use setFileNames() instead.
+*/
+
+/*!
+    \fn void Q3UriDrag::setFileNames(const QStringList &filenames)
+
+    Sets the URIs to be local file URIs equivalent to the \a filenames.
+
+    \sa localFileToUri(), setUris()
+*/
+void Q3UriDrag::setFileNames(const QStringList & fnames)
+{
+    QList<QByteArray> uris;
+    for (QStringList::ConstIterator i = fnames.begin();
+    i != fnames.end(); ++i) {
+        QByteArray fileUri = localFileToUri(*i);
+        if (!fileUri.isEmpty())
+            uris.append(fileUri);
+    }
+
+    setUris(uris);
+}
+
+/*!
+    \fn void Q3UriDrag::setFileNames(const QString &name)
+    \fn void Q3UriDrag::setFilenames(const QString &name)
+
+    Same as setFileNames(QStringList(\a name)).
+*/
+
+/*!
+    \fn void Q3UriDrag::setUnicodeUris(const QStringList &list)
+
+    Sets the URIs in the \a list to be Unicode URIs (only useful for
+    displaying to humans).
+
+    \sa localFileToUri(), setUris()
+*/
+void Q3UriDrag::setUnicodeUris(const QStringList & uuris)
+{
+    QList<QByteArray> uris;
+    for (int i = 0; i < uuris.count(); ++i)
+        uris.append(unicodeUriToUri(uuris.at(i)));
+    setUris(uris);
+}
+
+/*!
+    \fn QByteArray Q3UriDrag::unicodeUriToUri(const QString &string)
+
+    Returns the URI equivalent of the Unicode URI given in the \a string
+    (only useful for displaying to humans).
+
+    \sa uriToLocalFile()
+*/
+QByteArray Q3UriDrag::unicodeUriToUri(const QString& uuri)
+{
+    QByteArray utf8 = uuri.toUtf8();
+    QByteArray escutf8;
+    int n = utf8.length();
+    bool isFile = uuri.startsWith(QLatin1String("file://"));
+    for (int i=0; i<n; i++) {
+        if ((utf8[i] >= 'a' && utf8[i] <= 'z')
+          || utf8[i] == '/'
+          || (utf8[i] >= '0' && utf8[i] <= '9')
+          || (utf8[i] >= 'A' && utf8[i] <= 'Z')
+
+          || utf8[i] == '-' || utf8[i] == '_'
+          || utf8[i] == '.' || utf8[i] == '!'
+          || utf8[i] == '~' || utf8[i] == '*'
+          || utf8[i] == '(' || utf8[i] == ')'
+          || utf8[i] == '\''
+
+          // Allow this through, so that all URI-references work.
+          || (!isFile && utf8[i] == '#')
+
+          || utf8[i] == ';'
+          || utf8[i] == '?' || utf8[i] == ':'
+          || utf8[i] == '@' || utf8[i] == '&'
+          || utf8[i] == '=' || utf8[i] == '+'
+          || utf8[i] == '$' || utf8[i] == ',')
+        {
+            escutf8 += utf8[i];
+        } else {
+            // Everything else is escaped as %HH
+            QString s;
+            s.sprintf("%%%02x",(uchar)utf8[i]);
+            escutf8 += s.latin1();
+        }
+    }
+    return escutf8;
+}
+
+/*!
+    Returns the URI equivalent to the absolute local \a filename.
+
+    \sa uriToLocalFile()
+*/
+QByteArray Q3UriDrag::localFileToUri(const QString& filename)
+{
+    QString r = filename;
+
+    //check that it is an absolute file
+    if (QDir::isRelativePath(r))
+        return QByteArray();
+#ifdef Q_WS_WIN
+
+
+    bool hasHost = false;
+    // convert form network path
+    if (r.left(2) == QLatin1String("\\\\") || r.left(2) == QLatin1String("//")) {
+        r.remove(0, 2);
+        hasHost = true;
+    }
+
+    // Slosh -> Slash
+    int slosh;
+    while ((slosh=r.indexOf(QLatin1Char('\\'))) >= 0) {
+        r[slosh] = QLatin1Char('/');
+    }
+
+    // Drive
+    if (r[0] != QLatin1Char('/') && !hasHost)
+        r.insert(0,QLatin1Char('/'));
+
+#endif
+#if defined (Q_WS_X11) && 0
+    // URL without the hostname is considered to be errorneous by XDnD.
+    // See: http://www.newplanetsoftware.com/xdnd/dragging_files.html
+    // This feature is not active because this would break dnd between old and new qt apps.
+    char hostname[257];
+    if (gethostname(hostname, 255) == 0) {
+        hostname[256] = '\0';
+        r.prepend(QString::fromLatin1(hostname));
+    }
+#endif
+    return unicodeUriToUri(QString(QLatin1String("file://") + r));
+}
+
+/*!
+    \fn QString Q3UriDrag::uriToUnicodeUri(const char *string)
+
+    Returns the Unicode URI (only useful for displaying to humans)
+    equivalent of the URI given in the \a string.
+
+    Note that URIs are always in escaped UTF8 encoding.
+
+    \sa localFileToUri()
+*/
+QString Q3UriDrag::uriToUnicodeUri(const char* uri)
+{
+    QByteArray utf8;
+
+    while (*uri) {
+        switch (*uri) {
+          case '%': {
+                uint ch = (uchar) uri[1];
+                if (ch && uri[2]) {
+                    ch = htod(ch) * 16 + htod((uchar) uri[2]);
+                    utf8 += (char) ch;
+                    uri += 2;
+                }
+            }
+            break;
+          default:
+            utf8 += *uri;
+        }
+        ++uri;
+    }
+
+    return QString::fromUtf8(utf8);
+}
+
+/*!
+    \fn QString Q3UriDrag::uriToLocalFile(const char *string)
+
+    Returns the name of a local file equivalent to the URI given in the
+    \a string, or an empty string if it does not refer to a local file.
+
+    Note that URIs are always in escaped UTF8 encoding.
+
+    \sa localFileToUri()
+*/
+QString Q3UriDrag::uriToLocalFile(const char* uri)
+{
+    QString file;
+
+    if (!uri)
+        return file;
+    if (0==qstrnicmp(uri,"file:/",6)) // It is a local file uri
+        uri += 6;
+    else if (QString(QLatin1String(uri)).indexOf(QLatin1String(":/")) != -1) // It is a different scheme uri
+        return file;
+
+    bool local = uri[0] != '/' || (uri[0] != '\0' && uri[1] == '/');
+#ifdef Q_WS_X11
+    // do we have a hostname?
+    if (!local && uri[0] == '/' && uri[2] != '/') {
+        // then move the pointer to after the 'hostname/' part of the uri
+        const char* hostname_end = strchr(uri+1, '/');
+        if (hostname_end != NULL) {
+            char hostname[257];
+            if (gethostname(hostname, 255) == 0) {
+                hostname[256] = '\0';
+                if (qstrncmp(uri+1, hostname, hostname_end - (uri+1)) == 0) {
+                    uri = hostname_end + 1; // point after the slash
+                    local = true;
+                }
+            }
+        }
+    }
+#endif
+    if (local) {
+        file = uriToUnicodeUri(uri);
+        if (uri[1] == '/') {
+            file.remove((uint)0,1);
+        } else {
+                file.insert(0, QLatin1Char('/'));
+        }
+#ifdef Q_WS_WIN
+        if (file.length() > 2 && file[0] == QLatin1Char('/') && file[2] == QLatin1Char('|')) {
+            file[2] = QLatin1Char(':');
+            file.remove(0,1);
+        } else if (file.length() > 2 && file[0] == QLatin1Char('/') && file[1].isLetter() && file[2] == QLatin1Char(':')) {
+            file.remove(0, 1);
+        }
+        // Leave slash as slashes.
+#endif
+    }
+#ifdef Q_WS_WIN
+    else {
+        file = uriToUnicodeUri(uri);
+        // convert to network path
+        file.insert(1, QLatin1Char('/')); // leave as forward slashes
+    }
+#endif
+
+    return file;
+}
+
+/*!
+    \fn bool Q3UriDrag::decodeLocalFiles(const QMimeSource *source, QStringList &list)
+
+    Decodes URIs from the MIME \a source, converting them to local filenames
+    where possible, and places them in the \a list (which is first cleared).
+
+    Returns true if the MIME \a source contained a valid list of URIs;
+    otherwise returns false. The list will be empty if no URIs referred to
+    local files.
+*/
+bool Q3UriDrag::decodeLocalFiles(const QMimeSource* e, QStringList& l)
+{
+    Q3StrList u;
+    if (!decode(e, u))
+        return false;
+
+    l.clear();
+    for (uint i = 0; i < u.count(); ++i) {
+        QString lf = uriToLocalFile(u.at(i));
+        if (!lf.isEmpty())
+            l.append(lf);
+    }
+    return true;
+}
+
+/*!
+    \fn bool Q3UriDrag::decodeToUnicodeUris(const QMimeSource *source, QStringList &list)
+
+    Decodes URIs from the MIME \a source, converting them to Unicode URIs
+    (only useful for displaying to humans), and places them in the \a list
+    (which is first cleared).
+
+    Returns true if the MIME \a source contained a valid list of URIs;
+    otherwise returns false.
+*/
+bool Q3UriDrag::decodeToUnicodeUris(const QMimeSource* e, QStringList& l)
+{
+    Q3StrList u;
+    if (!decode(e, u))
+        return false;
+
+    l.clear();
+    for (uint i = 0; i < u.count(); ++i)
+        l.append(uriToUnicodeUri(u.at(i)));
+
+    return true;
+}
+
+/*!
+    \class Q3ColorDrag
+
+    \brief The Q3ColorDrag class provides a drag and drop object for
+    transferring colors between widgets.
+
+    \compat
+
+    This class provides a drag object which can be used to transfer data
+    about colors for drag and drop and in the clipboard. For example, it
+    is used in QColorDialog.
+
+    The color is set in the constructor but can be changed with
+    setColor().
+
+    For more information about drag and drop, see the Q3DragObject class
+    and the \link dnd.html drag and drop documentation\endlink.
+*/
+
+/*!
+    Constructs a color drag object with the given \a col. Passes \a
+    dragsource and \a name to the Q3StoredDrag constructor.
+*/
+
+Q3ColorDrag::Q3ColorDrag(const QColor &col, QWidget *dragsource, const char *name)
+    : Q3StoredDrag("application/x-color", dragsource)
+{
+    setObjectName(QLatin1String(name));
+    setColor(col);
+}
+
+/*!
+    Constructs a color drag object with a white color. Passes \a
+    dragsource and \a name to the Q3StoredDrag constructor.
+*/
+
+Q3ColorDrag::Q3ColorDrag(QWidget *dragsource, const char *name)
+    : Q3StoredDrag("application/x-color", dragsource)
+{
+    setObjectName(QLatin1String(name));
+    setColor(Qt::white);
+}
+
+/*!
+    \fn void Q3ColorDrag::setColor(const QColor &color)
+
+    Sets the \a color of the color drag.
+*/
+
+void Q3ColorDrag::setColor(const QColor &col)
+{
+    short r = (col.red()   << 8) | col.red();
+    short g = (col.green() << 8) | col.green();
+    short b = (col.blue()  << 8) | col.blue();
+
+    // make sure we transmit data in network order
+    r = htons(r);
+    g = htons(g);
+    b = htons(b);
+
+    ushort rgba[4] = {
+        r, g, b,
+        0xffff // Alpha not supported yet.
+    };
+    QByteArray data;
+    data.resize(sizeof(rgba));
+    memcpy(data.data(), rgba, sizeof(rgba));
+    setEncodedData(data);
+}
+
+/*!
+    \fn bool Q3ColorDrag::canDecode(QMimeSource *source)
+
+    Returns true if the color drag object can decode the MIME \a source;
+    otherwise returns false.
+*/
+
+bool Q3ColorDrag::canDecode(QMimeSource *e)
+{
+    return e->provides("application/x-color");
+}
+
+/*!
+    \fn bool Q3ColorDrag::decode(QMimeSource *source, QColor &color)
+
+    Decodes the MIME \a source, and sets the decoded values to the
+    given \a color. Returns true if the decoding is successful.
+    Returns false if the size of the encoded data is not the
+    expected size.
+*/
+
+bool Q3ColorDrag::decode(QMimeSource *e, QColor &col)
+{
+    QByteArray data = e->encodedData("application/x-color");
+    ushort rgba[4];
+    if (data.size() != sizeof(rgba))
+        return false;
+
+    memcpy(rgba, data.constData(), sizeof(rgba));
+
+    short r = rgba[0];
+    short g = rgba[1];
+    short b = rgba[2];
+    short a = rgba[3];
+
+    // data is in network order
+    r = ntohs(r);
+    g = ntohs(g);
+    b = ntohs(b);
+    a = ntohs(a);
+
+    r = (r >> 8) & 0xff;
+    g = (g >> 8) & 0xff;
+    b = (b >> 8) & 0xff;
+    a = (a >> 8) & 0xff;
+
+    col.setRgb(r, g, b, a);
+    return true;
+}
+
+QT_END_NAMESPACE
diff --git a/src/qt3support/other/q3dragobject.h b/src/qt3support/other/q3dragobject.h
new file mode 100644
index 0000000..10645c8
--- /dev/null
+++ b/src/qt3support/other/q3dragobject.h
@@ -0,0 +1,218 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3DRAGOBJECT_H
+#define Q3DRAGOBJECT_H
+
+#include <QtCore/qobject.h>
+#include <QtGui/qcolor.h>
+#include <QtGui/qmime.h>
+#include <QtGui/qimage.h>
+#include <Qt3Support/q3strlist.h>
+#include <QtCore/qlist.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+class QWidget;
+class Q3TextDragPrivate;
+class Q3DragObjectPrivate;
+class Q3StoredDragPrivate;
+class Q3ImageDragPrivate;
+class Q3ImageDrag;
+class Q3TextDrag;
+class Q3StrList;
+class QImage;
+class QPixmap;
+
+class Q_COMPAT_EXPORT Q3DragObject : public QObject, public QMimeSource {
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(Q3DragObject)
+public:
+    Q3DragObject(QWidget * dragSource = 0, const char *name = 0);
+    virtual ~Q3DragObject();
+
+    bool drag();
+    bool dragMove();
+    void dragCopy();
+    void dragLink();
+
+    virtual void setPixmap(QPixmap);
+    virtual void setPixmap(QPixmap, const QPoint& hotspot);
+    QPixmap pixmap() const;
+    QPoint pixmapHotSpot() const;
+
+    QWidget * source();
+    static QWidget * target();
+
+    enum DragMode { DragDefault, DragCopy, DragMove, DragLink, DragCopyOrMove };
+
+protected:
+    Q3DragObject(Q3DragObjectPrivate &, QWidget *dragSource = 0);
+    virtual bool drag(DragMode);
+
+private:
+    friend class QDragMime;
+    Q_DISABLE_COPY(Q3DragObject)
+};
+
+class Q_COMPAT_EXPORT Q3StoredDrag: public Q3DragObject {
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(Q3StoredDrag)
+public:
+    Q3StoredDrag(const char *mimeType, QWidget *dragSource = 0, const char *name = 0);
+    ~Q3StoredDrag();
+
+    virtual void setEncodedData(const QByteArray &);
+
+    const char * format(int i) const;
+    virtual QByteArray encodedData(const char*) const;
+
+protected:
+    Q3StoredDrag(Q3StoredDragPrivate &, const char *mimeType, QWidget *dragSource = 0);
+
+private:
+    Q_DISABLE_COPY(Q3StoredDrag)
+};
+
+class Q_COMPAT_EXPORT Q3TextDrag: public Q3DragObject {
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(Q3TextDrag)
+public:
+    Q3TextDrag(const QString &, QWidget *dragSource = 0, const char *name = 0);
+    Q3TextDrag(QWidget * dragSource = 0, const char * name = 0);
+    ~Q3TextDrag();
+
+    virtual void setText(const QString &);
+    virtual void setSubtype(const QString &);
+
+    const char * format(int i) const;
+    virtual QByteArray encodedData(const char*) const;
+
+    static bool canDecode(const QMimeSource* e);
+    static bool decode(const QMimeSource* e, QString& s);
+    static bool decode(const QMimeSource* e, QString& s, QString& subtype);
+
+protected:
+    Q3TextDrag(Q3TextDragPrivate &, QWidget * dragSource = 0);
+
+private:
+    Q_DISABLE_COPY(Q3TextDrag)
+};
+
+class Q_COMPAT_EXPORT Q3ImageDrag: public Q3DragObject {
+    Q_OBJECT
+    Q_DECLARE_PRIVATE(Q3ImageDrag)
+public:
+    Q3ImageDrag(QImage image, QWidget * dragSource = 0, const char * name = 0);
+    Q3ImageDrag(QWidget * dragSource = 0, const char * name = 0);
+    ~Q3ImageDrag();
+
+    virtual void setImage(QImage image);
+
+    const char * format(int i) const;
+    virtual QByteArray encodedData(const char*) const;
+
+    static bool canDecode(const QMimeSource* e);
+    static bool decode(const QMimeSource* e, QImage& i);
+    static bool decode(const QMimeSource* e, QPixmap& i);
+
+protected:
+    Q3ImageDrag(Q3ImageDragPrivate &, QWidget * dragSource = 0);
+
+private:
+    Q_DISABLE_COPY(Q3ImageDrag)
+};
+
+
+class Q_COMPAT_EXPORT Q3UriDrag: public Q3StoredDrag {
+    Q_OBJECT
+
+public:
+    Q3UriDrag(const Q3StrList &uris, QWidget * dragSource = 0, const char * name = 0);
+    Q3UriDrag(QWidget * dragSource = 0, const char * name = 0);
+    ~Q3UriDrag();
+
+    void setFileNames(const QStringList & fnames);
+    inline void setFileNames(const QString & fname) { setFileNames(QStringList(fname)); }
+    void setFilenames(const QStringList & fnames) { setFileNames(fnames); }
+    inline void setFilenames(const QString & fname) { setFileNames(QStringList(fname)); }
+    void setUnicodeUris(const QStringList & uuris);
+    virtual void setUris(const QList<QByteArray> &uris);
+
+    static QString uriToLocalFile(const char*);
+    static QByteArray localFileToUri(const QString&);
+    static QString uriToUnicodeUri(const char*);
+    static QByteArray unicodeUriToUri(const QString&);
+    static bool canDecode(const QMimeSource* e);
+    static bool decode(const QMimeSource* e, Q3StrList& i);
+    static bool decodeToUnicodeUris(const QMimeSource* e, QStringList& i);
+    static bool decodeLocalFiles(const QMimeSource* e, QStringList& i);
+
+private:
+    Q_DISABLE_COPY(Q3UriDrag)
+};
+
+class Q_COMPAT_EXPORT Q3ColorDrag : public Q3StoredDrag
+{
+    Q_OBJECT
+    QColor color;
+
+public:
+    Q3ColorDrag(const QColor &col, QWidget *dragsource = 0, const char *name = 0);
+    Q3ColorDrag(QWidget * dragSource = 0, const char * name = 0);
+    void setColor(const QColor &col);
+
+    static bool canDecode(QMimeSource *);
+    static bool decode(QMimeSource *, QColor &col);
+
+private:
+    Q_DISABLE_COPY(Q3ColorDrag)
+};
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3DRAGOBJECT_H
diff --git a/src/qt3support/other/q3dropsite.cpp b/src/qt3support/other/q3dropsite.cpp
new file mode 100644
index 0000000..ef4ae29
--- /dev/null
+++ b/src/qt3support/other/q3dropsite.cpp
@@ -0,0 +1,82 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3dropsite.h"
+
+#ifndef QT_NO_DRAGANDDROP
+
+#include "qwidget.h"
+
+QT_BEGIN_NAMESPACE
+
+/*!
+  \class Q3DropSite
+  \brief The Q3DropSite class provides nothing and does nothing.
+
+  \compat
+
+  It was used in Qt 1.x to do some drag and drop; that has since been
+  folded into QWidget.
+
+  \sa Q3DragObject, Q3TextDrag, Q3ImageDrag
+*/
+
+/*!
+  Constructs a Q3DropSite to handle events for the widget \a self.
+
+  Pass \c this as the \a self parameter.
+  This enables dropping by calling QWidget::setAcceptDrops(true).
+*/
+Q3DropSite::Q3DropSite(QWidget* self)
+{
+    self->setAcceptDrops(true);
+}
+
+/*!
+  Destroys the drop site.
+*/
+Q3DropSite::~Q3DropSite()
+{
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_DRAGANDDROP
diff --git a/src/qt3support/other/q3dropsite.h b/src/qt3support/other/q3dropsite.h
new file mode 100644
index 0000000..211a6a9
--- /dev/null
+++ b/src/qt3support/other/q3dropsite.h
@@ -0,0 +1,65 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3DROPSITE_H
+#define Q3DROPSITE_H
+
+#include <QtCore/qglobal.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+class QWidget;
+
+class Q_COMPAT_EXPORT Q3DropSite {
+public:
+    Q3DropSite(QWidget* parent);
+    virtual ~Q3DropSite();
+};
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif  // QDROPSITE_H
diff --git a/src/qt3support/other/q3gridlayout.h b/src/qt3support/other/q3gridlayout.h
new file mode 100644
index 0000000..521920d
--- /dev/null
+++ b/src/qt3support/other/q3gridlayout.h
@@ -0,0 +1,78 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3GRIDLAYOUT_H
+#define Q3GRIDLAYOUT_H
+
+#include <QtGui/qboxlayout.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+class Q3GridLayout : public QGridLayout
+{
+public:
+    inline explicit Q3GridLayout(QWidget *parent)
+        : QGridLayout(parent) { setMargin(0); setSpacing(0); }
+
+    inline Q3GridLayout(QWidget *parent, int nRows, int nCols = 1, int margin = 0,
+                        int spacing = -1, const char *name = 0)
+        : QGridLayout(parent, nRows, nCols, margin, spacing, name) {}
+
+    inline Q3GridLayout(int nRows, int nCols = 1, int spacing = -1, const char *name = 0)
+        : QGridLayout(nRows, nCols, spacing, name) {}
+
+    inline Q3GridLayout(QLayout *parentLayout, int nRows =1, int nCols = 1, int spacing = -1,
+                        const char *name = 0)
+        : QGridLayout(parentLayout, nRows, nCols, spacing, name) {}
+
+private:
+    Q_DISABLE_COPY(Q3GridLayout)
+};
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3GRIDLAYOUT_H
diff --git a/src/qt3support/other/q3membuf.cpp b/src/qt3support/other/q3membuf.cpp
new file mode 100644
index 0000000..4305bb7
--- /dev/null
+++ b/src/qt3support/other/q3membuf.cpp
@@ -0,0 +1,171 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3membuf_p.h"
+
+QT_BEGIN_NAMESPACE
+
+// *******************************************************************
+// QMembuf declaration and implementation
+// *******************************************************************
+
+/*  \internal
+    This class implements an efficient buffering of data that is often used by
+    asynchronous IO classes like QSocket, QHttp and QProcess.
+*/
+
+Q3Membuf::Q3Membuf() : _size(0), _index(0)
+{
+}
+
+Q3Membuf::~Q3Membuf()
+{
+    while (!buf.isEmpty())
+        delete buf.takeFirst();
+}
+
+/*! \internal
+    This function consumes \a nbytes bytes of data from the
+    buffer and copies it into \a sink. If \a sink is a 0 pointer
+    the data goes into the nirvana.
+*/
+bool Q3Membuf::consumeBytes(Q_ULONG nbytes, char *sink)
+{
+    if (nbytes <= 0 || (qint64)nbytes > _size)
+        return false;
+    _size -= nbytes;
+    while (!buf.isEmpty()) {
+        QByteArray *a = buf.first();
+        if ((int)(_index + nbytes) >= a->size()) {
+            // Here we skip the whole byte array and get the next later
+            int len = a->size() - _index;
+            if (sink) {
+                memcpy(sink, a->constData()+_index, len);
+                sink += len;
+            }
+            nbytes -= len;
+            buf.removeFirst();
+	    delete a;
+            _index = 0;
+            if (nbytes == 0)
+                break;
+        } else {
+            // Here we skip only a part of the first byte array
+            if (sink)
+                memcpy(sink, a->constData()+_index, nbytes);
+            _index += nbytes;
+            break;
+        }
+    }
+    return true;
+}
+
+/*! \internal
+    Scans for any occurrence of '\n' in the buffer. If \a store
+    is not 0 the text up to the first '\n' (or terminating 0) is
+    written to \a store, and a terminating 0 is appended to \a store
+    if necessary. Returns true if a '\n' was found; otherwise returns
+    false.
+*/
+bool Q3Membuf::scanNewline(QByteArray *store)
+{
+    if (_size == 0)
+        return false;
+    int i = 0; // index into 'store'
+    QByteArray *a = 0;
+    char *p;
+    int n;
+    bool retval = false;
+    for (int j = 0; j < buf.size(); ++j) {
+        a = buf.at(j);
+        p = a->data();
+        n = a->size();
+        if (!j) {
+            // first buffer
+            p += _index;
+            n -= _index;
+        }
+        if (store) {
+            while (n-- > 0) {
+                *(store->data()+i) = *p;
+                if (++i == (int)store->size())
+                    store->resize(store->size() < 256
+                                   ? 1024 : store->size()*4);
+                if (*p == '\n') {
+                    retval = true;
+                    goto end;
+                }
+                p++;
+            }
+        } else {
+            while (n-- > 0) {
+                if(*p == '\n')
+                    return true;
+                p++;
+            }
+        }
+    }
+ end:
+    if (store)
+        store->resize(i);
+    return retval;
+}
+
+int Q3Membuf::ungetch(int ch)
+{
+    if (buf.isEmpty() || _index==0) {
+        // we need a new QByteArray
+        QByteArray *ba = new QByteArray;
+        ba->resize(1);
+        buf.prepend(ba);
+        _size++;
+        (*ba)[0] = ch;
+    } else {
+        // we can reuse a place in the buffer
+        QByteArray *ba = buf.first();
+        _index--;
+        _size++;
+        (*ba)[(int)_index] = ch;
+    }
+    return ch;
+}
+
+QT_END_NAMESPACE
diff --git a/src/qt3support/other/q3membuf_p.h b/src/qt3support/other/q3membuf_p.h
new file mode 100644
index 0000000..29a74f9
--- /dev/null
+++ b/src/qt3support/other/q3membuf_p.h
@@ -0,0 +1,103 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3MEMBUF_P_H
+#define Q3MEMBUF_P_H
+
+//
+//  W A R N I N G
+//  -------------
+//
+// This file is not part of the Qt API.  It exists for the convenience
+// of a number of Qt sources files.  This header file may change from
+// version to version without notice, or even be removed.
+//
+// We mean it.
+//
+
+#include "QtCore/qbytearray.h"
+#include "QtCore/qlist.h"
+
+QT_BEGIN_NAMESPACE
+
+class Q_COMPAT_EXPORT Q3Membuf
+{
+public:
+    Q3Membuf();
+    ~Q3Membuf();
+
+    void append(QByteArray *ba);
+    void clear();
+
+    bool consumeBytes(Q_ULONG nbytes, char *sink);
+    QByteArray readAll();
+    bool scanNewline(QByteArray *store);
+    bool canReadLine() const;
+
+    int ungetch(int ch);
+
+    qint64 size() const;
+
+private:
+
+    QList<QByteArray *> buf;
+    qint64 _size;
+    qint64 _index;
+};
+
+inline void Q3Membuf::append(QByteArray *ba)
+{ buf.append(ba); _size += ba->size(); }
+
+inline void Q3Membuf::clear()
+{ qDeleteAll(buf); buf.clear(); _size=0; _index=0; }
+
+inline QByteArray Q3Membuf::readAll()
+{ QByteArray ba; ba.resize(_size); consumeBytes(_size,ba.data()); return ba; }
+
+inline bool Q3Membuf::canReadLine() const
+{ return const_cast<Q3Membuf*>(this)->scanNewline(0); }
+
+inline qint64 Q3Membuf::size() const
+{ return _size; }
+
+QT_END_NAMESPACE
+
+#endif // Q3MEMBUF_P_H
diff --git a/src/qt3support/other/q3mimefactory.cpp b/src/qt3support/other/q3mimefactory.cpp
new file mode 100644
index 0000000..3fc3f61
--- /dev/null
+++ b/src/qt3support/other/q3mimefactory.cpp
@@ -0,0 +1,546 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3mimefactory.h"
+
+#ifndef QT_NO_MIMEFACTORY
+
+#include "qmap.h"
+#include "qmime.h"
+#include "qstringlist.h"
+#include "qfileinfo.h"
+#include "qdir.h"
+#include "q3dragobject.h"
+#include "qpixmap.h"
+#include "qimagereader.h"
+#include "q3cleanuphandler.h"
+#include "private/qtextimagehandler_p.h"
+
+QT_BEGIN_NAMESPACE
+
+static Q3MimeSourceFactory* defaultfactory = 0;
+static Q3SingleCleanupHandler<Q3MimeSourceFactory> qmime_cleanup_factory;
+
+class Q3MimeSourceFactoryData {
+public:
+    Q3MimeSourceFactoryData() :
+        last(0)
+    {
+    }
+
+    ~Q3MimeSourceFactoryData()
+    {
+        QMap<QString, QMimeSource*>::Iterator it = stored.begin();
+        while (it != stored.end()) {
+            delete *it;
+            ++it;
+        }
+        delete last;
+    }
+
+    QMap<QString, QMimeSource*> stored;
+    QMap<QString, QString> extensions;
+    QStringList path;
+    QMimeSource* last;
+    QList<Q3MimeSourceFactory*> factories;
+};
+
+static QImage richTextImageLoader(const QString &name, const QString &context)
+{
+    QImage img;
+
+    const QMimeSource *src = Q3MimeSourceFactory::defaultFactory()->data(name, context);
+    if (src && Q3ImageDrag::decode(src, img))
+        return img;
+
+    return QImage();
+}
+
+/*!
+    \class Q3MimeSourceFactory
+    \brief The Q3MimeSourceFactory class is an extensible provider of mime-typed data.
+
+    \compat
+
+    A Q3MimeSourceFactory provides an abstract interface to a
+    collection of information. Each piece of information is
+    represented by a QMimeSource object which can be examined and
+    converted to concrete data types by functions such as
+    Q3ImageDrag::canDecode() and Q3ImageDrag::decode().
+
+    The base Q3MimeSourceFactory can be used in two ways: as an
+    abstraction of a collection of files or as specifically stored
+    data. For it to access files, call setFilePath() before accessing
+    data. For stored data, call setData() for each item (there are
+    also convenience functions, e.g. setText(), setImage() and
+    setPixmap(), that simply call setData() with appropriate
+    parameters).
+
+    The rich text widgets, QTextEdit and QTextBrowser, use
+    Q3MimeSourceFactory to resolve references such as images or links
+    within rich text documents. They either access the default factory
+    (see \l{defaultFactory()}) or their own. Other classes that are
+    capable of displaying rich text (such as QLabel, QWhatsThis or
+    QMessageBox) always use the default factory.
+
+    A factory can also be used as a container to store data associated
+    with a name. This technique is useful whenever rich text contains
+    images that are stored in the program itself, not loaded from the
+    hard disk. Your program may, for example, define some image data
+    as:
+    \snippet doc/src/snippets/code/src_qt3support_other_q3mimefactory.cpp 0
+
+    To be able to use this image within some rich text, for example
+    inside a QLabel, you must create a QImage from the raw data and
+    insert it into the factory with a unique name:
+    \snippet doc/src/snippets/code/src_qt3support_other_q3mimefactory.cpp 1
+
+    Now you can create a rich text QLabel with
+
+    \snippet doc/src/snippets/code/src_qt3support_other_q3mimefactory.cpp 2
+
+    When no longer needed, you can clear the data from the factory:
+
+    \snippet doc/src/snippets/code/src_qt3support_other_q3mimefactory.cpp 3
+*/
+
+
+/*!
+    Constructs a Q3MimeSourceFactory that has no file path and no
+    stored content.
+*/
+Q3MimeSourceFactory::Q3MimeSourceFactory() :
+    d(new Q3MimeSourceFactoryData)
+{
+    addFilePath(QLatin1String(":/qt/q3mimesourcefactory/")); //to get from the resources
+    // add some reasonable defaults
+    setExtensionType(QLatin1String("htm"), "text/html;charset=iso8859-1");
+    setExtensionType(QLatin1String("html"), "text/html;charset=iso8859-1");
+    setExtensionType(QLatin1String("txt"), "text/plain");
+    setExtensionType(QLatin1String("xml"), "text/xml;charset=UTF-8");
+    setExtensionType(QLatin1String("jpg"), "image/jpeg"); // support misspelled jpeg files
+}
+
+/*!
+    Destroys the Q3MimeSourceFactory, deleting all stored content.
+*/
+Q3MimeSourceFactory::~Q3MimeSourceFactory()
+{
+    if (defaultFactory() == this)
+        defaultfactory = 0;
+    delete d;
+}
+
+QMimeSource* Q3MimeSourceFactory::dataInternal(const QString& abs_name, const QMap<QString, QString> &extensions) const
+{
+    QMimeSource* r = 0;
+    QStringList attempted_names(abs_name);
+    QFileInfo fi(abs_name);
+    if (fi.isReadable()) {
+        // get the right mimetype
+        QString e = fi.extension(false);
+        QByteArray mimetype("application/octet-stream");
+        if (extensions.contains(e))
+            mimetype = extensions[e].latin1();
+        if (!QImageReader::imageFormat(abs_name).isEmpty())
+            mimetype = "application/x-qt-image";
+
+        QFile f(abs_name);
+        if (f.open(QIODevice::ReadOnly) && f.size()) {
+            QByteArray ba;
+            ba.resize(f.size());
+            f.readBlock(ba.data(), ba.size());
+            Q3StoredDrag* sr = new Q3StoredDrag(mimetype);
+            sr->setEncodedData(ba);
+            delete d->last;
+            d->last = r = sr;
+        }
+    }
+
+    // we didn't find the mime-source, so ask the default factory for
+    // the mime-source (this one will iterate over all installed ones)
+    //
+    // this looks dangerous, as this dataInternal() function will be
+    // called again when the default factory loops over all installed
+    // factories (including this), but the static bool looping in
+    // data() avoids endless recursions
+    if (!r && this != defaultFactory())
+        r = (QMimeSource*)defaultFactory()->data(abs_name);
+
+    return r;
+}
+
+
+/*!
+    Returns a reference to the data associated with \a abs_name. The
+    return value remains valid only until the next data() or setData()
+    call, so you should immediately decode the result.
+
+    If there is no data associated with \a abs_name in the factory's
+    store, the factory tries to access the local filesystem. If \a
+    abs_name isn't an absolute file name, the factory will search for
+    it in all defined paths (see \l{setFilePath()}).
+
+    The factory understands all the image formats supported by
+    QImageReader. Any other mime types are determined by the file name
+    extension. The default settings are
+    \snippet doc/src/snippets/code/src_qt3support_other_q3mimefactory.cpp 4
+    The effect of these is that file names ending in "txt" will be
+    treated as text encoded in the local encoding; those ending in
+    "xml" will be treated as text encoded in Unicode UTF-8 encoding.
+    The text/html type is treated specially, since the encoding can be
+    specified in the html file itself. "html" or "htm" will be treated
+    as text encoded in the encoding specified by the html meta tag, if
+    none could be found, the charset of the mime type will be used.
+    The text subtype ("html", "plain", or "xml") does not affect the
+    factory, but users of the factory may behave differently. We
+    recommend creating "xml" files where practical. These files can be
+    viewed regardless of the runtime encoding and can encode any
+    Unicode characters without resorting to encoding definitions
+    inside the file.
+
+    Any file data that is not recognized will be retrieved as a
+    QMimeSource providing the "application/octet-stream" mime type,
+    meaning uninterpreted binary data.
+
+    You can add further extensions or change existing ones with
+    subsequent calls to setExtensionType(). If the extension mechanism
+    is not sufficient for your problem domain, you can inherit
+    Q3MimeSourceFactory and reimplement this function to perform some
+    more specialized mime-type detection. The same applies if you want
+    to use the mime source factory to access URL referenced data over
+    a network.
+*/
+const QMimeSource *Q3MimeSourceFactory::data(const QString& abs_name) const
+{
+    if (d->stored.contains(abs_name))
+        return d->stored[abs_name];
+
+    const QMimeSource *r = 0;
+    if (abs_name.isEmpty())
+        return r;
+    QStringList::Iterator it;
+    if (abs_name[0] == QLatin1Char('/')
+#ifdef Q_WS_WIN
+            || (abs_name[0].isLetter() && abs_name[1] == QLatin1Char(':')) || abs_name.startsWith(QLatin1String("\\\\"))
+#endif
+   )
+    {
+        // handle absolute file names directly
+        r = dataInternal(abs_name, d->extensions);
+    }
+    else { // check list of paths
+        for (it = d->path.begin(); !r && it != d->path.end(); ++it) {
+            QString filename = *it;
+            if (filename[(int)filename.length()-1] != QLatin1Char('/'))
+                filename += QLatin1Char('/');
+            filename += abs_name;
+            r = dataInternal(filename, d->extensions);
+        }
+    }
+
+    static bool looping = false;
+    if (!r && this == defaultFactory()) {
+        // we found no mime-source and we are the default factory, so
+        // we know all the other installed mime-source factories, so
+        // ask them
+        if (!looping) {
+            // to avoid endless recustions, don't enter the loop below
+            // if data() got called from within the loop below
+            looping = true;
+            for (int i = 0; i < d->factories.size(); ++i) {
+                const Q3MimeSourceFactory *f = d->factories.at(i);
+                if (f == this)
+                    continue;
+                r = static_cast<const QMimeSource *>(f->data(abs_name));
+                if (r) {
+                    looping = false;
+                    return r;
+                }
+            }
+            looping = false;
+        }
+    } else if (!r) {
+        // we are not the default mime-source factory, so ask the
+        // default one for the mime-source, as this one will loop over
+        // all installed mime-source factories and ask these
+        r = static_cast<const QMimeSource *>(defaultFactory()->data(abs_name));
+    }
+    return r;
+}
+
+/*!
+    \fn void Q3MimeSourceFactory::setFilePath(const QStringList &path)
+    \fn void Q3MimeSourceFactory::setFilePath(const QString &path)
+
+    Sets the list of directories that will be searched when named data
+    is requested to those given in the string list \a path.
+
+    \sa filePath()
+*/
+void Q3MimeSourceFactory::setFilePath(const QStringList& path)
+{
+    d->path = path;
+}
+
+/*!
+    Returns the currently set search paths.
+*/
+QStringList Q3MimeSourceFactory::filePath() const
+{
+    return d->path;
+}
+
+/*!
+    Adds another search path, \a p to the existing search paths.
+
+    \sa setFilePath()
+*/
+void Q3MimeSourceFactory::addFilePath(const QString& p)
+{
+    d->path += p;
+}
+
+/*!
+    Sets the mime-type to be associated with the file name extension,
+    \a ext to \a mimetype. This determines the mime-type for files
+    found via the paths set by setFilePath().
+*/
+void Q3MimeSourceFactory::setExtensionType(const QString& ext, const char* mimetype)
+{
+    d->extensions.insert(ext, QLatin1String(mimetype));
+}
+
+/*!
+    Converts the absolute or relative data item name \a
+    abs_or_rel_name to an absolute name, interpreted within the
+    context (path) of the data item named \a context (this must be an
+    absolute name).
+*/
+QString Q3MimeSourceFactory::makeAbsolute(const QString& abs_or_rel_name, const QString& context) const
+{
+    if (context.isNull() ||
+         !(context[0] == QLatin1Char('/')
+#ifdef Q_WS_WIN
+         || (context[0].isLetter() && context[1] == QLatin1Char(':'))
+#endif
+          ))
+        return abs_or_rel_name;
+    if (abs_or_rel_name.isEmpty())
+        return context;
+    QFileInfo c(context);
+    if (!c.isDir()) {
+        QFileInfo r(c.dir(true), abs_or_rel_name);
+        return r.absFilePath();
+    } else {
+        QDir d(context);
+        QFileInfo r(d, abs_or_rel_name);
+        return r.absFilePath();
+    }
+}
+
+/*!
+    \overload
+    A convenience function. See data(const QString& abs_name). The
+    file name is given in \a abs_or_rel_name and the path is in \a
+    context.
+*/
+const QMimeSource* Q3MimeSourceFactory::data(const QString& abs_or_rel_name, const QString& context) const
+{
+    const QMimeSource* r = data(makeAbsolute(abs_or_rel_name,context));
+    if (!r && !d->path.isEmpty())
+        r = data(abs_or_rel_name);
+    return r;
+}
+
+
+/*!
+    Sets \a text to be the data item associated with the absolute name
+    \a abs_name.
+
+    Equivalent to setData(abs_name, new Q3TextDrag(text)).
+*/
+void Q3MimeSourceFactory::setText(const QString& abs_name, const QString& text)
+{
+    setData(abs_name, new Q3TextDrag(text));
+}
+
+/*!
+    Sets \a image to be the data item associated with the absolute
+    name \a abs_name.
+
+    Equivalent to setData(abs_name, new Q3ImageDrag(image)).
+*/
+void Q3MimeSourceFactory::setImage(const QString& abs_name, const QImage& image)
+{
+    setData(abs_name, new Q3ImageDrag(image));
+}
+
+/*!
+    Sets \a pixmap to be the data item associated with the absolute
+    name \a abs_name.
+*/
+void Q3MimeSourceFactory::setPixmap(const QString& abs_name, const QPixmap& pixmap)
+{
+    setData(abs_name, new Q3ImageDrag(pixmap.convertToImage()));
+}
+
+/*!
+  Sets \a data to be the data item associated with
+  the absolute name \a abs_name. Note that the ownership of \a data is
+  transferred to the factory: do not delete or access the pointer after
+  passing it to this function.
+
+  Passing 0 for data removes previously stored data.
+*/
+void Q3MimeSourceFactory::setData(const QString& abs_name, QMimeSource* data)
+{
+    if (d->stored.contains(abs_name))
+        delete d->stored[abs_name];
+    d->stored.insert(abs_name,data);
+}
+
+
+/*!
+    Returns the application-wide default mime source factory. This
+    factory is used by rich text rendering classes such as
+    QSimpleRichText, QWhatsThis and QMessageBox to resolve named
+    references within rich text documents. It serves also as the
+    initial factory for the more complex render widgets, QTextEdit and
+    QTextBrowser.
+
+    \sa setDefaultFactory()
+*/
+Q3MimeSourceFactory* Q3MimeSourceFactory::defaultFactory()
+{
+    if (!defaultfactory)
+    {
+        defaultfactory = new Q3MimeSourceFactory();
+        qmime_cleanup_factory.set(&defaultfactory);
+        QTextImageHandler::externalLoader = richTextImageLoader;
+    }
+    return defaultfactory;
+}
+
+/*!
+    Sets the default \a factory, destroying any previously set mime
+    source provider. The ownership of the factory is transferred to
+    Qt.
+
+    \sa defaultFactory()
+*/
+void Q3MimeSourceFactory::setDefaultFactory(Q3MimeSourceFactory* factory)
+{
+    if (!defaultfactory)
+        qmime_cleanup_factory.set(&defaultfactory);
+    else if (defaultfactory != factory)
+        delete defaultfactory;
+    defaultfactory = factory;
+}
+
+/*!
+    Sets the defaultFactory() to 0 and returns the previous one.
+*/
+
+Q3MimeSourceFactory* Q3MimeSourceFactory::takeDefaultFactory()
+{
+    Q3MimeSourceFactory *f = defaultfactory;
+    defaultfactory = 0;
+    return f;
+}
+
+/*!
+    Adds the Q3MimeSourceFactory \a f to the list of available
+    mimesource factories. If the defaultFactory() can't resolve a
+    data() it iterates over the list of installed mimesource factories
+    until the data can be resolved.
+
+    \sa removeFactory()
+*/
+
+void Q3MimeSourceFactory::addFactory(Q3MimeSourceFactory *f)
+{
+    Q3MimeSourceFactory::defaultFactory()->d->factories.append(f);
+}
+
+/*!
+    Removes the mimesource factory \a f from the list of available
+    mimesource factories.
+
+    \sa addFactory()
+*/
+
+void Q3MimeSourceFactory::removeFactory(Q3MimeSourceFactory *f)
+{
+    Q3MimeSourceFactory::defaultFactory()->d->factories.removeAll(f);
+}
+
+QPixmap qPixmapFromMimeSource(const QString &abs_name)
+{
+    const QMimeSource *m = Q3MimeSourceFactory::defaultFactory()->data(abs_name);
+    if (!m) {
+        if (QFile::exists(abs_name))
+            return QPixmap(abs_name);
+        if (!abs_name.isEmpty())
+            qWarning("QPixmap::fromMimeSource: Cannot find pixmap \"%s\" in the mime source factory",
+                      abs_name.latin1());
+        return QPixmap();
+    }
+    QPixmap pix;
+    Q3ImageDrag::decode(m, pix);
+    return pix;
+}
+
+QImage qImageFromMimeSource(const QString &abs_name)
+{
+    const QMimeSource *m = Q3MimeSourceFactory::defaultFactory()->data(abs_name);
+    if (!m) {
+        qWarning("QImage::fromMimeSource: Cannot find image \"%s\" in the mime source factory", abs_name.latin1());
+        return QImage();
+    }
+    QImage img;
+    Q3ImageDrag::decode(m, img);
+    return img;
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_MIMEFACTORY
diff --git a/src/qt3support/other/q3mimefactory.h b/src/qt3support/other/q3mimefactory.h
new file mode 100644
index 0000000..e21f63b
--- /dev/null
+++ b/src/qt3support/other/q3mimefactory.h
@@ -0,0 +1,102 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3MIMEFACTORY_H
+#define Q3MIMEFACTORY_H
+
+#include <QtGui/qwindowdefs.h>
+#include <QtCore/qstring.h>
+#include <QtCore/qmap.h>
+#include <QtGui/qpixmap.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+#ifndef QT_NO_MIMEFACTORY
+
+class QStringList;
+class QMimeSource;
+class Q3MimeSourceFactoryData;
+
+class Q_COMPAT_EXPORT Q3MimeSourceFactory {
+public:
+    Q3MimeSourceFactory();
+    virtual ~Q3MimeSourceFactory();
+
+    static Q3MimeSourceFactory* defaultFactory();
+    static void setDefaultFactory(Q3MimeSourceFactory*);
+    static Q3MimeSourceFactory* takeDefaultFactory();
+    static void addFactory(Q3MimeSourceFactory *f);
+    static void removeFactory(Q3MimeSourceFactory *f);
+
+    virtual const QMimeSource* data(const QString& abs_name) const;
+    virtual QString makeAbsolute(const QString& abs_or_rel_name, const QString& context) const;
+    const QMimeSource* data(const QString& abs_or_rel_name, const QString& context) const;
+
+    virtual void setText(const QString& abs_name, const QString& text);
+    virtual void setImage(const QString& abs_name, const QImage& im);
+    virtual void setPixmap(const QString& abs_name, const QPixmap& pm);
+    virtual void setData(const QString& abs_name, QMimeSource* data);
+    virtual void setFilePath(const QStringList&);
+    inline  void setFilePath(const QString &path) { setFilePath(QStringList(path)); }
+    virtual QStringList filePath() const;
+    void addFilePath(const QString&);
+    virtual void setExtensionType(const QString& ext, const char* mimetype);
+
+private:
+    QMimeSource *dataInternal(const QString& abs_name, const QMap<QString, QString> &extensions) const;
+    Q3MimeSourceFactoryData* d;
+};
+
+Q_COMPAT_EXPORT QPixmap qPixmapFromMimeSource(const QString &abs_name);
+
+Q_COMPAT_EXPORT QImage qImageFromMimeSource(const QString &abs_name);
+
+#endif // QT_NO_MIMEFACTORY
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3MIMEFACTORY_H
diff --git a/src/qt3support/other/q3polygonscanner.cpp b/src/qt3support/other/q3polygonscanner.cpp
new file mode 100644
index 0000000..da1af1e
--- /dev/null
+++ b/src/qt3support/other/q3polygonscanner.cpp
@@ -0,0 +1,939 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3polygonscanner.h"
+#include "q3pointarray.h"
+#include <stdlib.h>
+
+QT_BEGIN_NAMESPACE
+
+// Based on Xserver code miFillGeneralPoly...
+/*
+ *
+ *     Written by Brian Kelleher;  Oct. 1985
+ *
+ *     Routine to fill a polygon.  Two fill rules are
+ *     supported: frWINDING and frEVENODD.
+ *
+ *     See fillpoly.h for a complete description of the algorithm.
+ */
+
+/*
+ *     These are the data structures needed to scan
+ *     convert regions.  Two different scan conversion
+ *     methods are available -- the even-odd method, and
+ *     the winding number method.
+ *     The even-odd rule states that a point is inside
+ *     the polygon if a ray drawn from that point in any
+ *     direction will pass through an odd number of
+ *     path segments.
+ *     By the winding number rule, a point is decided
+ *     to be inside the polygon if a ray drawn from that
+ *     point in any direction passes through a different
+ *     number of clockwise and counterclockwise path
+ *     segments.
+ *
+ *     These data structures are adapted somewhat from
+ *     the algorithm in (Foley/Van Dam) for scan converting
+ *     polygons.
+ *     The basic algorithm is to start at the top (smallest y)
+ *     of the polygon, stepping down to the bottom of
+ *     the polygon by incrementing the y coordinate.  We
+ *     keep a list of edges which the current scanline crosses,
+ *     sorted by x.  This list is called the Active Edge Table (AET)
+ *     As we change the y-coordinate, we update each entry in
+ *     in the active edge table to reflect the edges new xcoord.
+ *     This list must be sorted at each scanline in case
+ *     two edges intersect.
+ *     We also keep a data structure known as the Edge Table (ET),
+ *     which keeps track of all the edges which the current
+ *     scanline has not yet reached.  The ET is basically a
+ *     list of ScanLineList structures containing a list of
+ *     edges which are entered at a given scanline.  There is one
+ *     ScanLineList per scanline at which an edge is entered.
+ *     When we enter a new edge, we move it from the ET to the AET.
+ *
+ *     From the AET, we can implement the even-odd rule as in
+ *     (Foley/Van Dam).
+ *     The winding number rule is a little trickier.  We also
+ *     keep the EdgeTableEntries in the AET linked by the
+ *     nextWETE (winding EdgeTableEntry) link.  This allows
+ *     the edges to be linked just as before for updating
+ *     purposes, but only uses the edges linked by the nextWETE
+ *     link as edges representing spans of the polygon to
+ *     drawn (as with the even-odd rule).
+ */
+
+/* $XConsortium: miscanfill.h,v 1.5 94/04/17 20:27:50 dpw Exp $ */
+/*
+
+Copyright (c) 1987  X Consortium
+
+Permission is hereby granted, free of charge, to any person obtaining
+a copy of this software and associated documentation files (the
+"Software"), to deal in the Software without restriction, including
+without limitation the rights to use, copy, modify, merge, publish,
+distribute, sublicense, and/or sell copies of the Software, and to
+permit persons to whom the Software is furnished to do so, subject to
+the following conditions:
+
+The above copyright notice and this permission notice shall be included
+in all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+IN NO EVENT SHALL THE X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR
+OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of the X Consortium shall
+not be used in advertising or otherwise to promote the sale, use or
+other dealings in this Software without prior written authorization
+from the X Consortium.
+
+*/
+
+
+/*
+ *     scanfill.h
+ *
+ *     Written by Brian Kelleher; Jan 1985
+ *
+ *     This file contains a few macros to help track
+ *     the edge of a filled object.  The object is assumed
+ *     to be filled in scanline order, and thus the
+ *     algorithm used is an extension of Bresenham's line
+ *     drawing algorithm which assumes that y is always the
+ *     major axis.
+ *     Since these pieces of code are the same for any filled shape,
+ *     it is more convenient to gather the library in one
+ *     place, but since these pieces of code are also in
+ *     the inner loops of output primitives, procedure call
+ *     overhead is out of the question.
+ *     See the author for a derivation if needed.
+ */
+
+/*
+ *  In scan converting polygons, we want to choose those pixels
+ *  which are inside the polygon.  Thus, we add .5 to the starting
+ *  x coordinate for both left and right edges.  Now we choose the
+ *  first pixel which is inside the pgon for the left edge and the
+ *  first pixel which is outside the pgon for the right edge.
+ *  Draw the left pixel, but not the right.
+ *
+ *  How to add .5 to the starting x coordinate:
+ *      If the edge is moving to the right, then subtract dy from the
+ *  error term from the general form of the algorithm.
+ *      If the edge is moving to the left, then add dy to the error term.
+ *
+ *  The reason for the difference between edges moving to the left
+ *  and edges moving to the right is simple:  If an edge is moving
+ *  to the right, then we want the algorithm to flip immediately.
+ *  If it is moving to the left, then we don't want it to flip until
+ *  we traverse an entire pixel.
+ */
+#define BRESINITPGON(dy, x1, x2, xStart, d, m, m1, incr1, incr2) { \
+    int dx;      /* local storage */ \
+\
+    /* \
+     *  if the edge is horizontal, then it is ignored \
+     *  and assumed not to be processed.  Otherwise, do this stuff. \
+     */ \
+    if ((dy) != 0) { \
+        xStart = (x1); \
+        dx = (x2) - xStart; \
+        if (dx < 0) { \
+            m = dx / (dy); \
+            m1 = m - 1; \
+            incr1 = -2 * dx + 2 * (dy) * m1; \
+            incr2 = -2 * dx + 2 * (dy) * m; \
+            d = 2 * m * (dy) - 2 * dx - 2 * (dy); \
+        } else { \
+            m = dx / (dy); \
+            m1 = m + 1; \
+            incr1 = 2 * dx - 2 * (dy) * m1; \
+            incr2 = 2 * dx - 2 * (dy) * m; \
+            d = -2 * m * (dy) + 2 * dx; \
+        } \
+    } \
+}
+
+#define BRESINCRPGON(d, minval, m, m1, incr1, incr2) { \
+    if (m1 > 0) { \
+        if (d > 0) { \
+            minval += m1; \
+            d += incr1; \
+        } \
+        else { \
+            minval += m; \
+            d += incr2; \
+        } \
+    } else {\
+        if (d >= 0) { \
+            minval += m1; \
+            d += incr1; \
+        } \
+        else { \
+            minval += m; \
+            d += incr2; \
+        } \
+    } \
+}
+
+
+/*
+ *     This structure contains all of the information needed
+ *     to run the bresenham algorithm.
+ *     The variables may be hardcoded into the declarations
+ *     instead of using this structure to make use of
+ *     register declarations.
+ */
+typedef struct {
+    int minor;         /* minor axis        */
+    int d;           /* decision variable */
+    int m, m1;       /* slope and slope+1 */
+    int incr1, incr2; /* error increments */
+} BRESINFO;
+
+
+#define BRESINITPGONSTRUCT(dmaj, min1, min2, bres) \
+        BRESINITPGON(dmaj, min1, min2, bres.minor, bres.d, \
+                     bres.m, bres.m1, bres.incr1, bres.incr2)
+
+#define BRESINCRPGONSTRUCT(bres) \
+        BRESINCRPGON(bres.d, bres.minor, bres.m, bres.m1, bres.incr1, bres.incr2)
+
+
+typedef struct _EdgeTableEntry {
+     int ymax;             /* ycoord at which we exit this edge. */
+     BRESINFO bres;        /* Bresenham info to run the edge     */
+     struct _EdgeTableEntry *next;       /* next in the list     */
+     struct _EdgeTableEntry *back;       /* for insertion sort   */
+     struct _EdgeTableEntry *nextWETE;   /* for winding num rule */
+     int ClockWise;        /* flag for winding number rule       */
+} EdgeTableEntry;
+
+
+typedef struct _ScanLineList{
+     int scanline;              /* the scanline represented */
+     EdgeTableEntry *edgelist;  /* header node              */
+     struct _ScanLineList *next;  /* next in the list       */
+} ScanLineList;
+
+
+typedef struct {
+     int ymax;                 /* ymax for the polygon     */
+     int ymin;                 /* ymin for the polygon     */
+     ScanLineList scanlines;   /* header node              */
+} EdgeTable;
+
+
+/*
+ * Here is a struct to help with storage allocation
+ * so we can allocate a big chunk at a time, and then take
+ * pieces from this heap when we need to.
+ */
+#define SLLSPERBLOCK 25
+
+typedef struct _ScanLineListBlock {
+     ScanLineList SLLs[SLLSPERBLOCK];
+     struct _ScanLineListBlock *next;
+} ScanLineListBlock;
+
+/*
+ * number of points to buffer before sending them off
+ * to scanlines() :  Must be an even number
+ */
+#define NUMPTSTOBUFFER 200
+
+/*
+ *
+ *     a few macros for the inner loops of the fill code where
+ *     performance considerations don't allow a procedure call.
+ *
+ *     Evaluate the given edge at the given scanline.
+ *     If the edge has expired, then we leave it and fix up
+ *     the active edge table; otherwise, we increment the
+ *     x value to be ready for the next scanline.
+ *     The winding number rule is in effect, so we must notify
+ *     the caller when the edge has been removed so he
+ *     can reorder the Winding Active Edge Table.
+ */
+#define EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET) { \
+   if (pAET->ymax == y) {          /* leaving this edge */ \
+      pPrevAET->next = pAET->next; \
+      pAET = pPrevAET->next; \
+      fixWAET = 1; \
+      if (pAET) \
+         pAET->back = pPrevAET; \
+   } \
+   else { \
+      BRESINCRPGONSTRUCT(pAET->bres); \
+      pPrevAET = pAET; \
+      pAET = pAET->next; \
+   } \
+}
+
+
+/*
+ *     Evaluate the given edge at the given scanline.
+ *     If the edge has expired, then we leave it and fix up
+ *     the active edge table; otherwise, we increment the
+ *     x value to be ready for the next scanline.
+ *     The even-odd rule is in effect.
+ */
+#define EVALUATEEDGEEVENODD(pAET, pPrevAET, y) { \
+   if (pAET->ymax == y) {          /* leaving this edge */ \
+      pPrevAET->next = pAET->next; \
+      pAET = pPrevAET->next; \
+      if (pAET) \
+         pAET->back = pPrevAET; \
+   } \
+   else { \
+      BRESINCRPGONSTRUCT(pAET->bres) \
+      pPrevAET = pAET; \
+      pAET = pAET->next; \
+   } \
+}
+
+/***********************************************************
+
+Copyright (c) 1987  X Consortium
+
+Permission is hereby granted, free of charge, to any person obtaining a copy
+of this software and associated documentation files (the "Software"), to deal
+in the Software without restriction, including without limitation the rights
+to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+copies of the Software, and to permit persons to whom the Software is
+furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL THE
+X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN
+AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
+
+Except as contained in this notice, the name of the X Consortium shall not be
+used in advertising or otherwise to promote the sale, use or other dealings
+in this Software without prior written authorization from the X Consortium.
+
+
+Copyright 1987 by Digital Equipment Corporation, Maynard, Massachusetts.
+
+                        All Rights Reserved
+
+Permission to use, copy, modify, and distribute this software and its
+documentation for any purpose and without fee is hereby granted,
+provided that the above copyright notice appear in all copies and that
+both that copyright notice and this permission notice appear in
+supporting documentation, and that the name of Digital not be
+used in advertising or publicity pertaining to distribution of the
+software without specific, written prior permission.
+
+DIGITAL DISCLAIMS ALL WARRANTIES WITH REGARD TO THIS SOFTWARE, INCLUDING
+ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT SHALL
+DIGITAL BE LIABLE FOR ANY SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR
+ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS,
+WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION,
+ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS
+SOFTWARE.
+
+******************************************************************/
+
+#define MAXINT 0x7fffffff
+#define MININT -MAXINT
+
+/*
+ *     fillUtils.c
+ *
+ *     Written by Brian Kelleher;  Oct. 1985
+ *
+ *     This module contains all of the utility functions
+ *     needed to scan convert a polygon.
+ *
+ */
+/*
+ *     InsertEdgeInET
+ *
+ *     Insert the given edge into the edge table.
+ *     First we must find the correct bucket in the
+ *     Edge table, then find the right slot in the
+ *     bucket.  Finally, we can insert it.
+ *
+ */
+static bool
+miInsertEdgeInET(EdgeTable *ET, EdgeTableEntry *ETE,
+        int scanline, ScanLineListBlock **SLLBlock, int *iSLLBlock)
+{
+    register EdgeTableEntry *start, *prev;
+    register ScanLineList *pSLL, *pPrevSLL;
+    ScanLineListBlock *tmpSLLBlock;
+
+    /*
+     * find the right bucket to put the edge into
+     */
+    pPrevSLL = &ET->scanlines;
+    pSLL = pPrevSLL->next;
+    while (pSLL && (pSLL->scanline < scanline))
+    {
+        pPrevSLL = pSLL;
+        pSLL = pSLL->next;
+    }
+
+    /*
+     * reassign pSLL (pointer to ScanLineList) if necessary
+     */
+    if ((!pSLL) || (pSLL->scanline > scanline))
+    {
+        if (*iSLLBlock > SLLSPERBLOCK-1)
+        {
+            tmpSLLBlock =
+                  (ScanLineListBlock *)malloc(sizeof(ScanLineListBlock));
+            if (!tmpSLLBlock)
+                return false;
+            (*SLLBlock)->next = tmpSLLBlock;
+            tmpSLLBlock->next = 0;
+            *SLLBlock = tmpSLLBlock;
+            *iSLLBlock = 0;
+        }
+        pSLL = &((*SLLBlock)->SLLs[(*iSLLBlock)++]);
+
+        pSLL->next = pPrevSLL->next;
+        pSLL->edgelist = 0;
+        pPrevSLL->next = pSLL;
+    }
+    pSLL->scanline = scanline;
+
+    /*
+     * now insert the edge in the right bucket
+     */
+    prev = 0;
+    start = pSLL->edgelist;
+    while (start && (start->bres.minor < ETE->bres.minor))
+    {
+        prev = start;
+        start = start->next;
+    }
+    ETE->next = start;
+
+    if (prev)
+        prev->next = ETE;
+    else
+        pSLL->edgelist = ETE;
+    return true;
+}
+
+/*
+ *     CreateEdgeTable
+ *
+ *     This routine creates the edge table for
+ *     scan converting polygons.
+ *     The Edge Table (ET) looks like:
+ *
+ *    EdgeTable
+ *     --------
+ *    |  ymax  |        ScanLineLists
+ *    |scanline|-->------------>-------------->...
+ *     --------   |scanline|   |scanline|
+ *                |edgelist|   |edgelist|
+ *                ---------    ---------
+ *                    |             |
+ *                    |             |
+ *                    V             V
+ *              list of ETEs   list of ETEs
+ *
+ *     where ETE is an EdgeTableEntry data structure,
+ *     and there is one ScanLineList per scanline at
+ *     which an edge is initially entered.
+ *
+ */
+
+typedef struct {
+#if defined(Q_OS_MAC)
+    int y, x;
+#else
+    int x, y;
+#endif
+
+} DDXPointRec, *DDXPointPtr;
+
+/*
+ *     Clean up our act.
+ */
+static void
+miFreeStorage(ScanLineListBlock   *pSLLBlock)
+{
+    register ScanLineListBlock   *tmpSLLBlock;
+
+    while (pSLLBlock)
+    {
+        tmpSLLBlock = pSLLBlock->next;
+        free(pSLLBlock);
+        pSLLBlock = tmpSLLBlock;
+    }
+}
+
+static bool
+miCreateETandAET(int count, DDXPointPtr pts, EdgeTable *ET,
+        EdgeTableEntry *AET, EdgeTableEntry *pETEs, ScanLineListBlock *pSLLBlock)
+{
+    register DDXPointPtr top, bottom;
+    register DDXPointPtr PrevPt, CurrPt;
+    int iSLLBlock = 0;
+
+    int dy;
+
+    if (count < 2)  return true;
+
+    /*
+     *  initialize the Active Edge Table
+     */
+    AET->next = 0;
+    AET->back = 0;
+    AET->nextWETE = 0;
+    AET->bres.minor = MININT;
+
+    /*
+     *  initialize the Edge Table.
+     */
+    ET->scanlines.next = 0;
+    ET->ymax = MININT;
+    ET->ymin = MAXINT;
+    pSLLBlock->next = 0;
+
+    PrevPt = &pts[count-1];
+
+    /*
+     *  for each vertex in the array of points.
+     *  In this loop we are dealing with two vertices at
+     *  a time -- these make up one edge of the polygon.
+     */
+    while (count--)
+    {
+        CurrPt = pts++;
+
+        /*
+         *  find out which point is above and which is below.
+         */
+        if (PrevPt->y > CurrPt->y)
+        {
+            bottom = PrevPt, top = CurrPt;
+            pETEs->ClockWise = 0;
+        }
+        else
+        {
+            bottom = CurrPt, top = PrevPt;
+            pETEs->ClockWise = 1;
+        }
+
+        /*
+         * don't add horizontal edges to the Edge table.
+         */
+        if (bottom->y != top->y)
+        {
+            pETEs->ymax = bottom->y-1;  /* -1 so we don't get last scanline */
+
+            /*
+             *  initialize integer edge algorithm
+             */
+            dy = bottom->y - top->y;
+            BRESINITPGONSTRUCT(dy, top->x, bottom->x, pETEs->bres)
+
+            if (!miInsertEdgeInET(ET, pETEs, top->y, &pSLLBlock, &iSLLBlock))
+            {
+                miFreeStorage(pSLLBlock->next);
+                return false;
+            }
+
+            ET->ymax = qMax(ET->ymax, PrevPt->y);
+            ET->ymin = qMin(ET->ymin, PrevPt->y);
+            pETEs++;
+        }
+
+        PrevPt = CurrPt;
+    }
+    return true;
+}
+
+/*
+ *     loadAET
+ *
+ *     This routine moves EdgeTableEntries from the
+ *     EdgeTable into the Active Edge Table,
+ *     leaving them sorted by smaller x coordinate.
+ *
+ */
+
+static void
+miloadAET(EdgeTableEntry *AET, EdgeTableEntry *ETEs)
+{
+    register EdgeTableEntry *pPrevAET;
+    register EdgeTableEntry *tmp;
+
+    pPrevAET = AET;
+    AET = AET->next;
+    while (ETEs)
+    {
+        while (AET && (AET->bres.minor < ETEs->bres.minor))
+        {
+            pPrevAET = AET;
+            AET = AET->next;
+        }
+        tmp = ETEs->next;
+        ETEs->next = AET;
+        if (AET)
+            AET->back = ETEs;
+        ETEs->back = pPrevAET;
+        pPrevAET->next = ETEs;
+        pPrevAET = ETEs;
+
+        ETEs = tmp;
+    }
+}
+
+/*
+ *     computeWAET
+ *
+ *     This routine links the AET by the
+ *     nextWETE (winding EdgeTableEntry) link for
+ *     use by the winding number rule.  The final
+ *     Active Edge Table (AET) might look something
+ *     like:
+ *
+ *     AET
+ *     ----------  ---------   ---------
+ *     |ymax    |  |ymax    |  |ymax    |
+ *     | ...    |  |...     |  |...     |
+ *     |next    |->|next    |->|next    |->...
+ *     |nextWETE|  |nextWETE|  |nextWETE|
+ *     ---------   ---------   ^--------
+ *         |                   |       |
+ *         V------------------->       V---> ...
+ *
+ */
+static void
+micomputeWAET(EdgeTableEntry *AET)
+{
+    register EdgeTableEntry *pWETE;
+    register int inside = 1;
+    register int isInside = 0;
+
+    AET->nextWETE = 0;
+    pWETE = AET;
+    AET = AET->next;
+    while (AET)
+    {
+        if (AET->ClockWise)
+            isInside++;
+        else
+            isInside--;
+
+        if ((!inside && !isInside) ||
+            (inside &&  isInside))
+        {
+            pWETE->nextWETE = AET;
+            pWETE = AET;
+            inside = !inside;
+        }
+        AET = AET->next;
+    }
+    pWETE->nextWETE = 0;
+}
+
+/*
+ *     InsertionSort
+ *
+ *     Just a simple insertion sort using
+ *     pointers and back pointers to sort the Active
+ *     Edge Table.
+ *
+ */
+
+static int
+miInsertionSort(EdgeTableEntry *AET)
+{
+    register EdgeTableEntry *pETEchase;
+    register EdgeTableEntry *pETEinsert;
+    register EdgeTableEntry *pETEchaseBackTMP;
+    register int changed = 0;
+
+    AET = AET->next;
+    while (AET)
+    {
+        pETEinsert = AET;
+        pETEchase = AET;
+        while (pETEchase->back->bres.minor > AET->bres.minor)
+            pETEchase = pETEchase->back;
+
+        AET = AET->next;
+        if (pETEchase != pETEinsert)
+        {
+            pETEchaseBackTMP = pETEchase->back;
+            pETEinsert->back->next = AET;
+            if (AET)
+                AET->back = pETEinsert->back;
+            pETEinsert->next = pETEchase;
+            pETEchase->back->next = pETEinsert;
+            pETEchase->back = pETEinsert;
+            pETEinsert->back = pETEchaseBackTMP;
+            changed = 1;
+        }
+    }
+    return changed;
+}
+
+/*!
+    \overload
+*/
+void Q3PolygonScanner::scan(const Q3PointArray& pa, bool winding, int index, int npoints)
+{
+    scan(pa, winding, index, npoints, true);
+}
+
+/*!
+    \overload
+
+    If \a stitchable is false, the right and bottom edges of the
+    polygon are included. This causes adjacent polygons to overlap.
+*/
+void Q3PolygonScanner::scan(const Q3PointArray& pa, bool winding, int index, int npoints, bool stitchable)
+{
+    scan(pa, winding, index, npoints,
+        stitchable ? Edge(Left+Top) : Edge(Left+Right+Top+Bottom));
+}
+
+/*!
+    Calls processSpans() for all scanlines of the polygon defined by
+    \a npoints starting at \a index in \a pa.
+
+    If \a winding is true, the Winding algorithm rather than the
+    Odd-Even rule is used.
+
+    The \a edges is any bitwise combination of:
+    \list
+    \i Q3PolygonScanner::Left
+    \i Q3PolygonScanner::Right
+    \i Q3PolygonScanner::Top
+    \i Q3PolygonScanner::Bottom
+    \endlist
+    \a edges determines which edges are included.
+
+    \warning The edges feature does not work properly.
+
+*/
+void Q3PolygonScanner::scan(const Q3PointArray& pa, bool winding, int index, int npoints, Edge edges)
+{
+
+
+    DDXPointPtr ptsIn = (DDXPointPtr)pa.data();
+    ptsIn += index;
+    register EdgeTableEntry *pAET;  /* the Active Edge Table   */
+    register int y;                 /* the current scanline    */
+    register int nPts = 0;          /* number of pts in buffer */
+    register EdgeTableEntry *pWETE; /* Winding Edge Table      */
+    register ScanLineList *pSLL;    /* Current ScanLineList    */
+    register DDXPointPtr ptsOut;      /* ptr to output buffers   */
+    int *width;
+    DDXPointRec FirstPoint[NUMPTSTOBUFFER]; /* the output buffers */
+    int FirstWidth[NUMPTSTOBUFFER];
+    EdgeTableEntry *pPrevAET;       /* previous AET entry      */
+    EdgeTable ET;                   /* Edge Table header node  */
+    EdgeTableEntry AET;             /* Active ET header node   */
+    EdgeTableEntry *pETEs;          /* Edge Table Entries buff */
+    ScanLineListBlock SLLBlock;     /* header for ScanLineList */
+    int fixWAET = 0;
+    int edge_l = (edges & Left) ? 1 : 0;
+    int edge_r = (edges & Right) ? 1 : 0;
+    int edge_t = 1; //#### (edges & Top) ? 1 : 0;
+    int edge_b = (edges & Bottom) ? 1 : 0;
+
+    if (npoints == -1)
+        npoints = pa.size();
+
+    if (npoints < 3)
+        return;
+
+    if(!(pETEs = (EdgeTableEntry *)
+        malloc(sizeof(EdgeTableEntry) * npoints)))
+        return;
+    ptsOut = FirstPoint;
+    width = FirstWidth;
+    if (!miCreateETandAET(npoints, ptsIn, &ET, &AET, pETEs, &SLLBlock))
+    {
+        free(pETEs);
+        return;
+    }
+    pSLL = ET.scanlines.next;
+
+    if (!winding)
+    {
+        /*
+         *  for each scanline
+         */
+        for (y = ET.ymin+1-edge_t; y < ET.ymax+edge_b; y++)
+        {
+            /*
+             *  Add a new edge to the active edge table when we
+             *  get to the next edge.
+             */
+            if (pSLL && y == pSLL->scanline)
+            {
+                miloadAET(&AET, pSLL->edgelist);
+                pSLL = pSLL->next;
+            }
+            pPrevAET = &AET;
+            pAET = AET.next;
+
+            /*
+             *  for each active edge
+             */
+            while (pAET)
+            {
+                ptsOut->x = pAET->bres.minor + 1 - edge_l;
+                ptsOut++->y = y;
+                *width++ = pAET->next->bres.minor - pAET->bres.minor
+                    - 1 + edge_l + edge_r;
+                nPts++;
+
+                /*
+                 *  send out the buffer when its full
+                 */
+                if (nPts == NUMPTSTOBUFFER)
+                {
+                    processSpans(nPts, (QPoint*)FirstPoint, FirstWidth);
+                    ptsOut = FirstPoint;
+                    width = FirstWidth;
+                    nPts = 0;
+                }
+                EVALUATEEDGEEVENODD(pAET, pPrevAET, y)
+                EVALUATEEDGEEVENODD(pAET, pPrevAET, y)
+            }
+            miInsertionSort(&AET);
+        }
+    }
+    else      /* default to WindingNumber */
+    {
+        /*
+         *  for each scanline
+         */
+        for (y = ET.ymin+1-edge_t; y < ET.ymax+edge_b; y++)
+        {
+            /*
+             *  Add a new edge to the active edge table when we
+             *  get to the next edge.
+             */
+            if (pSLL && y == pSLL->scanline)
+            {
+                miloadAET(&AET, pSLL->edgelist);
+                micomputeWAET(&AET);
+                pSLL = pSLL->next;
+            }
+            pPrevAET = &AET;
+            pAET = AET.next;
+            pWETE = pAET;
+
+            /*
+             *  for each active edge
+             */
+            while (pAET)
+            {
+                /*
+                 *  if the next edge in the active edge table is
+                 *  also the next edge in the winding active edge
+                 *  table.
+                 */
+                if (pWETE == pAET)
+                {
+                    ptsOut->x = pAET->bres.minor + 1 - edge_l;
+                    ptsOut++->y = y;
+                    *width++ = pAET->nextWETE->bres.minor - pAET->bres.minor - 1 + edge_l + edge_r;
+                    nPts++;
+
+                    /*
+                     *  send out the buffer
+                     */
+                    if (nPts == NUMPTSTOBUFFER)
+                    {
+                        processSpans(nPts, (QPoint*)FirstPoint, FirstWidth);
+                        ptsOut = FirstPoint;
+                        width  = FirstWidth;
+                        nPts = 0;
+                    }
+
+                    pWETE = pWETE->nextWETE;
+                    while (pWETE != pAET) {
+                        EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET)
+                    }
+                    pWETE = pWETE->nextWETE;
+                }
+                EVALUATEEDGEWINDING(pAET, pPrevAET, y, fixWAET)
+            }
+
+            /*
+             *  reevaluate the Winding active edge table if we
+             *  just had to resort it or if we just exited an edge.
+             */
+            if (miInsertionSort(&AET) || fixWAET)
+            {
+                micomputeWAET(&AET);
+                fixWAET = 0;
+            }
+        }
+    }
+
+    /*
+     *     Get any spans that we missed by buffering
+     */
+
+
+    processSpans(nPts, (QPoint*)FirstPoint, FirstWidth);
+    free(pETEs);
+    miFreeStorage(SLLBlock.next);
+}
+/***** END OF X11-based CODE *****/
+
+QT_END_NAMESPACE
diff --git a/src/qt3support/other/q3polygonscanner.h b/src/qt3support/other/q3polygonscanner.h
new file mode 100644
index 0000000..7071825
--- /dev/null
+++ b/src/qt3support/other/q3polygonscanner.h
@@ -0,0 +1,70 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3POLYGONSCANNER_H
+#define Q3POLYGONSCANNER_H
+
+#include <QtCore/qglobal.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+class Q3PointArray;
+class QPoint;
+
+class Q_COMPAT_EXPORT Q3PolygonScanner {
+public:
+    virtual ~Q3PolygonScanner() {}
+    void scan(const Q3PointArray& pa, bool winding, int index=0, int npoints=-1);
+    void scan(const Q3PointArray& pa, bool winding, int index, int npoints, bool stitchable);
+    enum Edge { Left=1, Right=2, Top=4, Bottom=8 };
+    void scan(const Q3PointArray& pa, bool winding, int index, int npoints, Edge edges);
+    virtual void processSpans(int n, QPoint* point, int* width)=0;
+};
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3POLYGONSCANNER_H
diff --git a/src/qt3support/other/q3process.cpp b/src/qt3support/other/q3process.cpp
new file mode 100644
index 0000000..6eac812
--- /dev/null
+++ b/src/qt3support/other/q3process.cpp
@@ -0,0 +1,927 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "q3process.h"
+
+#ifndef QT_NO_PROCESS
+
+#include "qapplication.h"
+#include "private/q3membuf_p.h"
+
+#include <stdio.h>
+#include <stdlib.h>
+
+QT_BEGIN_NAMESPACE
+
+//#define QT_Q3PROCESS_DEBUG
+
+
+/*!
+    \class Q3Process
+
+    \brief The Q3Process class is used to start external programs and
+    to communicate with them.
+
+    \compat
+
+    You can write to the started program's standard input, and can
+    read the program's standard output and standard error. You can
+    pass command line arguments to the program either in the
+    constructor or with setArguments() or addArgument(). The program's
+    working directory can be set with setWorkingDirectory(). If you
+    need to set up environment variables pass them to the start() or
+    launch() functions (see below). The processExited() signal is
+    emitted if the program exits. The program's exit status is
+    available from exitStatus(), although you could simply call
+    normalExit() to see if the program terminated normally.
+
+    There are two different ways to start a process. If you just want
+    to run a program, optionally passing data to its standard input at
+    the beginning, use one of the launch() functions. If you want full
+    control of the program's standard input (especially if you don't
+    know all the data you want to send to standard input at the
+    beginning), use the start() function.
+
+    If you use start() you can write to the program's standard input
+    using writeToStdin() and you can close the standard input with
+    closeStdin(). The wroteToStdin() signal is emitted if the data
+    sent to standard input has been written. You can read from the
+    program's standard output using readStdout() or readLineStdout().
+    These functions return an empty QByteArray if there is no data to
+    read. The readyReadStdout() signal is emitted when there is data
+    available to be read from standard output. Standard error has a
+    set of functions that correspond to the standard output functions,
+    i.e. readStderr(), readLineStderr() and readyReadStderr().
+
+    If you use one of the launch() functions the data you pass will be
+    sent to the program's standard input which will be closed once all
+    the data has been written. You should \e not use writeToStdin() or
+    closeStdin() if you use launch(). If you need to send data to the
+    program's standard input after it has started running use start()
+    instead of launch().
+
+    Both start() and launch() can accept a string list of strings each
+    of which has the format, key=value, where the keys are the names
+    of environment variables.
+
+    You can test to see if a program is running with isRunning(). The
+    program's process identifier is available from
+    processIdentifier(). If you want to terminate a running program
+    use tryTerminate(), but note that the program may ignore this. If
+    you \e really want to terminate the program, without it having any
+    chance to clean up, you can use kill().
+
+    Although you may need quotes for a file named on the command line
+    (e.g. if it contains spaces) you shouldn't use extra quotes for
+    arguments passed to addArgument() or setArguments().
+
+    The readyReadStdout() signal is emitted when there is new data on
+    standard output. This happens asynchronously: you don't know if
+    more data will arrive later.
+
+    In the above example you could connect the processExited() signal
+    to the slot UicManager::readFromStdout() instead. If you do so,
+    you will be certain that all the data is available when the slot
+    is called. On the other hand, you must wait until the process has
+    finished before doing any processing.
+
+    Note that if you are expecting a lot of output from the process,
+    you may hit platform-dependent limits to the pipe buffer size. The
+    solution is to make sure you connect to the output, e.g. the
+    readyReadStdout() and readyReadStderr() signals and read the data
+    as soon as it becomes available.
+
+    Please note that Q3Process does not emulate a shell. This means that
+    Q3Process does not do any expansion of arguments: a '*' is passed as a '*'
+    to the program and is \e not replaced by all the files, a '$HOME' is also
+    passed literally and is \e not replaced by the environment variable HOME
+    and the special characters for IO redirection ('>', '|', etc.) are also
+    passed literally and do \e not have the special meaning as they have in a
+    shell.
+
+    Also note that Q3Process does not emulate a terminal. This means that
+    certain programs which need direct terminal control, do not work as
+    expected with Q3Process. Such programs include console email programs (like
+    pine and mutt) but also programs which require the user to enter a password
+    (like su and ssh).
+
+    \section1 Notes for Windows users
+
+    Some Windows commands, for example, \c dir, are not provided by
+    separate applications, but by the command interpreter.
+    If you attempt to use Q3Process to execute these commands directly
+    it won't work. One possible solution is to execute the command
+    interpreter itself (\c cmd.exe on some Windows systems), and ask
+    the interpreter to execute the desired command.
+
+    Under Windows there are certain problems starting 16-bit applications
+    and capturing their output. Microsoft recommends using an intermediate
+    application to start 16-bit applications.
+
+    \sa Q3Socket
+*/
+
+/*!
+    \enum Q3Process::Communication
+
+    This enum type defines the communication channels connected to the
+    process.
+
+    \value Stdin  Data can be written to the process's standard input.
+
+    \value Stdout  Data can be read from the process's standard
+    output.
+
+    \value Stderr  Data can be read from the process's standard error.
+
+    \value DupStderr  Both the process's standard error output \e and
+    its standard output are written to its standard output. (Like
+    Unix's dup2().) This means that nothing is sent to the standard
+    error output. This is especially useful if your application
+    requires that the output on standard output and on standard error
+    must be read in the same order that they are produced. This is a
+    flag, so to activate it you must pass \c{Stdout|Stderr|DupStderr},
+    or \c{Stdin|Stdout|Stderr|DupStderr} if you want to provide input,
+    to the setCommunication() call.
+
+    \sa setCommunication() communication()
+*/
+
+/*!
+    Constructs a Q3Process object. The \a parent and \a name parameters
+    are passed to the QObject constructor.
+
+    \sa setArguments() addArgument() start()
+*/
+Q3Process::Q3Process( QObject *parent, const char *name )
+    : QObject( parent, name ), ioRedirection( false ), notifyOnExit( false ),
+    wroteToStdinConnected( false ),
+    readStdoutCalled( false ), readStderrCalled( false ),
+    comms( Stdin|Stdout|Stderr )
+{
+    init();
+}
+
+/*!
+    Constructs a Q3Process with \a arg0 as the command to be executed.
+    The \a parent and \a name parameters are passed to the QObject
+    constructor.
+
+    The process is not started. You must call start() or launch() to
+    start the process.
+
+    \sa setArguments() addArgument() start()
+*/
+Q3Process::Q3Process( const QString& arg0, QObject *parent, const char *name )
+    : QObject( parent, name ), ioRedirection( false ), notifyOnExit( false ),
+    wroteToStdinConnected( false ),
+    readStdoutCalled( false ), readStderrCalled( false ),
+    comms( Stdin|Stdout|Stderr )
+{
+    init();
+    addArgument( arg0 );
+}
+
+/*!
+    Constructs a Q3Process with \a args as the arguments of the
+    process. The first element in the list is the command to be
+    executed. The other elements in the list are the arguments to this
+    command. The \a parent and \a name parameters are passed to the
+    QObject constructor.
+
+    The process is not started. You must call start() or launch() to
+    start the process.
+
+    \sa setArguments() addArgument() start()
+*/
+Q3Process::Q3Process( const QStringList& args, QObject *parent, const char *name )
+    : QObject( parent, name ), ioRedirection( false ), notifyOnExit( false ),
+    wroteToStdinConnected( false ),
+    readStdoutCalled( false ), readStderrCalled( false ),
+    comms( Stdin|Stdout|Stderr )
+{
+    init();
+    setArguments( args );
+}
+
+/*!
+    \fn Q3Process::~Q3Process()
+
+    Destroys the instance.
+
+    If the process is running, it is <b>not</b> terminated! The
+    standard input, standard output and standard error of the process
+    are closed.
+
+    You can connect the destroyed() signal to the kill() slot, if you
+    want the process to be terminated automatically when the instance
+    is destroyed.
+
+    \sa tryTerminate() kill()
+*/
+
+/*!
+    Returns the list of arguments that are set for the process.
+    Arguments can be specified with the constructor or with the
+    functions setArguments() and addArgument().
+
+    Note that if you want to iterate over the list, you should iterate
+    over a copy, e.g.
+    \snippet doc/src/snippets/code/src_qt3support_other_q3process.cpp 0
+
+    \sa setArguments() addArgument()
+*/
+QStringList Q3Process::arguments() const
+{
+    return _arguments;
+}
+
+/*!
+    Clears the list of arguments that are set for the process.
+
+    \sa setArguments() addArgument()
+*/
+void Q3Process::clearArguments()
+{
+    _arguments.clear();
+}
+
+/*!
+    Sets \a args as the arguments for the process. The first element
+    in the list is the command to be executed. The other elements in
+    the list are the arguments to the command. Any previous arguments
+    are deleted.
+
+    Q3Process does not perform argument substitutions; for example, if you
+    specify "*" or "$DISPLAY", these values are passed to the process
+    literally. If you want to have the same behavior as the shell
+    provides, you must do the substitutions yourself; i.e. instead of
+    specifying a "*" you must specify the list of all the filenames in
+    the current directory, and instead of "$DISPLAY" you must specify
+    the value of the environment variable \c DISPLAY.
+
+    Note for Windows users. The standard Windows shells, e.g. \c
+    command.com and \c cmd.exe, do not perform file globbing, i.e.
+    they do not convert a "*" on the command line into a list of files
+    in the current directory. For this reason most Windows
+    applications implement their own file globbing, and as a result of
+    this, specifying an argument of "*" for a Windows application is
+    likely to result in the application performing a file glob and
+    ending up with a list of filenames.
+
+    \sa arguments() addArgument()
+*/
+void Q3Process::setArguments( const QStringList& args )
+{
+    _arguments = args;
+}
+
+/*!
+    Adds \a arg to the end of the list of arguments.
+
+    The first element in the list of arguments is the command to be
+    executed; the following elements are the command's arguments.
+
+    \sa arguments() setArguments()
+*/
+void Q3Process::addArgument( const QString& arg )
+{
+    _arguments.append( arg );
+}
+
+#ifndef QT_NO_DIR
+/*!
+    Returns the working directory that was set with
+    setWorkingDirectory(), or the current directory if none has been
+    explicitly set.
+
+    \sa setWorkingDirectory() QDir::current()
+*/
+QDir Q3Process::workingDirectory() const
+{
+    return workingDir;
+}
+
+/*!
+    Sets \a dir as the working directory for processes. This does not
+    affect running processes; only processes that are started
+    afterwards are affected.
+
+    Setting the working directory is especially useful for processes
+    that try to access files with relative paths.
+
+    \sa workingDirectory() start()
+*/
+void Q3Process::setWorkingDirectory( const QDir& dir )
+{
+    workingDir = dir;
+}
+#endif //QT_NO_DIR
+
+/*!
+    Returns the communication required with the process, i.e. some
+    combination of the \c Communication flags.
+
+    \sa setCommunication()
+*/
+int Q3Process::communication() const
+{
+    return comms;
+}
+
+/*!
+    Sets \a commFlags as the communication required with the process.
+
+    \a commFlags is a bitwise OR of the flags defined by the \c
+    Communication enum.
+
+    The default is \c{Stdin|Stdout|Stderr}.
+
+    \sa communication()
+*/
+void Q3Process::setCommunication( int commFlags )
+{
+    comms = commFlags;
+}
+
+/*!
+    Returns true if the process has exited normally; otherwise returns
+    false. This implies that this function returns false if the
+    process is still running.
+
+    \sa isRunning() exitStatus() processExited()
+*/
+bool Q3Process::normalExit() const
+{
+    // isRunning() has the side effect that it determines the exit status!
+    if ( isRunning() )
+	return false;
+    else
+	return exitNormal;
+}
+
+/*!
+    Returns the exit status of the process or 0 if the process is
+    still running. This function returns immediately and does not wait
+    until the process is finished.
+
+    If normalExit() is false (e.g. if the program was killed or
+    crashed), this function returns 0, so you should check the return
+    value of normalExit() before relying on this value.
+
+    \sa normalExit() processExited()
+*/
+int Q3Process::exitStatus() const
+{
+    // isRunning() has the side effect that it determines the exit status!
+    if ( isRunning() )
+	return 0;
+    else
+	return exitStat;
+}
+
+
+/*!
+    Reads the data that the process has written to standard output.
+    When new data is written to standard output, the class emits the
+    signal readyReadStdout().
+
+    If there is no data to read, this function returns a QByteArray of
+    size 0: it does not wait until there is something to read.
+
+    \sa readyReadStdout() readLineStdout() readStderr() writeToStdin()
+*/
+QByteArray Q3Process::readStdout()
+{
+    if ( readStdoutCalled ) {
+	return QByteArray();
+    }
+    readStdoutCalled = true;
+    Q3Membuf *buf = membufStdout();
+    readStdoutCalled = false;
+
+    return buf->readAll();
+}
+
+/*!
+    Reads the data that the process has written to standard error.
+    When new data is written to standard error, the class emits the
+    signal readyReadStderr().
+
+    If there is no data to read, this function returns a QByteArray of
+    size 0: it does not wait until there is something to read.
+
+    \sa readyReadStderr() readLineStderr() readStdout() writeToStdin()
+*/
+QByteArray Q3Process::readStderr()
+{
+    if ( readStderrCalled ) {
+	return QByteArray();
+    }
+    readStderrCalled = true;
+    Q3Membuf *buf = membufStderr();
+    readStderrCalled = false;
+
+    return buf->readAll();
+}
+
+/*!
+    Reads a line of text from standard output, excluding any trailing
+    newline or carriage return characters, and returns it. Returns
+    an empty string if canReadLineStdout() returns false.
+
+    By default, the text is interpreted to be in Latin-1 encoding. If you need
+    other codecs, you can set a different codec with
+    QTextCodec::setCodecForCStrings().
+
+    \sa canReadLineStdout() readyReadStdout() readStdout() readLineStderr()
+*/
+QString Q3Process::readLineStdout()
+{
+    QByteArray a( 256 );
+    Q3Membuf *buf = membufStdout();
+    if ( !buf->scanNewline( &a ) ) {
+      if ( !canReadLineStdout() )
+	return QString();
+
+      if ( !buf->scanNewline( &a ) )
+	return QString( QLatin1String(buf->readAll()) );
+    }
+
+    uint size = a.size();
+    buf->consumeBytes( size, 0 );
+
+    // get rid of terminating \n or \r\n
+    if ( size>0 && a.at( size - 1 ) == '\n' ) {
+      if ( size>1 && a.at( size - 2 ) == '\r' )
+	a.chop(2);
+      else
+	a.chop(1);
+    }
+    return QString(QString::fromLatin1(a.constData()));
+}
+
+/*!
+    Reads a line of text from standard error, excluding any trailing
+    newline or carriage return characters and returns it. Returns
+    an empty string if canReadLineStderr() returns false.
+
+    By default, the text is interpreted to be in Latin-1 encoding. If you need
+    other codecs, you can set a different codec with
+    QTextCodec::setCodecForCStrings().
+
+    \sa canReadLineStderr() readyReadStderr() readStderr() readLineStdout()
+*/
+QString Q3Process::readLineStderr()
+{
+    QByteArray a( 256 );
+    Q3Membuf *buf = membufStderr();
+    if ( !buf->scanNewline( &a ) ) {
+      if ( !canReadLineStderr() )
+	return QString();
+
+      if ( !buf->scanNewline( &a ) )
+	return QString( QString::fromLatin1( buf->readAll().constData() ) );
+    }
+
+    uint size = a.size();
+    buf->consumeBytes( size, 0 );
+
+    // get rid of terminating \n or \r\n
+    if ( size>0 && a.at( size - 1 ) == '\n' ) {
+      if ( size>1 && a.at( size - 2 ) == '\r' )
+	a.chop(2);
+      else
+	a.chop(1);
+    }
+    return QString( QString::fromLatin1( a.constData() ) );
+}
+
+/*!
+    \fn bool Q3Process::start( QStringList *env )
+
+    Tries to run a process for the command and arguments that were
+    specified with setArguments(), addArgument() or that were
+    specified in the constructor. The command is searched for in the
+    path for executable programs; you can also use an absolute path in
+    the command itself.
+
+    If \a env is null, then the process is started with the same
+    environment as the starting process. If \a env is non-null, then
+    the values in the stringlist are interpreted as environment
+    setttings of the form \c {key=value} and the process is started in
+    these environment settings. For convenience, there is a small
+    exception to this rule: under Unix, if \a env does not contain any
+    settings for the environment variable \c LD_LIBRARY_PATH, then
+    this variable is inherited from the starting process; under
+    Windows the same applies for the environment variable \c PATH.
+
+    Returns true if the process could be started; otherwise returns
+    false.
+
+    You can write data to the process's standard input with
+    writeToStdin(). You can close standard input with closeStdin() and
+    you can terminate the process with tryTerminate(), or with kill().
+
+    You can call this function even if you've used this instance to
+    create a another process which is still running. In such cases,
+    Q3Process closes the old process's standard input and deletes
+    pending data, i.e., you lose all control over the old process, but
+    the old process is not terminated. This applies also if the
+    process could not be started. (On operating systems that have
+    zombie processes, Qt will also wait() on the old process.)
+
+    \sa launch() closeStdin()
+*/
+
+/*!
+    \fn void Q3Process::tryTerminate() const
+
+    Asks the process to terminate. Processes can ignore this if they
+    wish. If you want to be certain that the process really
+    terminates, you can use kill() instead.
+
+    The slot returns immediately: it does not wait until the process
+    has finished. When the process terminates, the processExited()
+    signal is emitted.
+
+    \sa kill() processExited()
+*/
+
+/*!
+    \fn void Q3Process::kill() const
+
+    Terminates the process. This is not a safe way to end a process
+    since the process will not be able to do any cleanup.
+    tryTerminate() is safer, but processes can ignore a
+    tryTerminate().
+
+    The nice way to end a process and to be sure that it is finished,
+    is to do something like this:
+    \snippet doc/src/snippets/code/src_qt3support_other_q3process_unix.cpp 0
+
+    This tries to terminate the process the nice way. If the process
+    is still running after 5 seconds, it terminates the process the
+    hard way. The timeout should be chosen depending on the time the
+    process needs to do all its cleanup: use a higher value if the
+    process is likely to do a lot of computation or I/O on cleanup.
+
+    The slot returns immediately: it does not wait until the process
+    has finished. When the process terminates, the processExited()
+    signal is emitted.
+
+    \sa tryTerminate() processExited()
+*/
+
+/*!
+    \fn bool Q3Process::isRunning() const
+
+    Returns true if the process is running; otherwise returns false.
+
+    \sa normalExit() exitStatus() processExited()
+*/
+
+/*!
+    \fn bool Q3Process::canReadLineStdout() const
+
+    Returns true if it's possible to read an entire line of text from
+    standard output at this time; otherwise returns false.
+
+    \sa readLineStdout() canReadLineStderr()
+*/
+
+/*!
+    \fn bool Q3Process::canReadLineStderr() const
+
+    Returns true if it's possible to read an entire line of text from
+    standard error at this time; otherwise returns false.
+
+    \sa readLineStderr() canReadLineStdout()
+*/
+
+/*!
+    \fn void Q3Process::writeToStdin( const QByteArray& buf )
+
+    Writes the data \a buf to the process's standard input. The
+    process may or may not read this data.
+
+    This function returns immediately; the Q3Process class might write
+    the data at a later point (you must enter the event loop for this
+    to occur). When all the data is written to the process, the signal
+    wroteToStdin() is emitted. This does not mean that the process
+    actually read the data, since this class only detects when it was
+    able to write the data to the operating system.
+
+    \sa wroteToStdin() closeStdin() readStdout() readStderr()
+*/
+
+/*!
+    \fn void Q3Process::closeStdin()
+
+    Closes the process's standard input.
+
+    This function also deletes any pending data that has not been
+    written to standard input.
+
+    \sa wroteToStdin()
+*/
+
+/*!
+    \fn Q3Process::PID Q3Process::processIdentifier()
+
+    Returns platform dependent information about the process. This can
+    be used together with platform specific system calls.
+
+    Under Unix the return value is the PID of the process, or -1 if no
+    process belongs to this object.
+
+    Under Windows it is a pointer to the \c PROCESS_INFORMATION
+    struct, or 0 if no process is belongs to this object.
+
+    Use of this function's return value is likely to be non-portable.
+*/
+
+/*!
+    \fn void Q3Process::launchFinished()
+
+    This signal is emitted when the process was started with launch().
+    If the start was successful, this signal is emitted after all the
+    data has been written to standard input. If the start failed, then
+    this signal is emitted immediately.
+
+    This signal is especially useful if you want to know when you can
+    safely delete the Q3Process object when you are not interested in
+    reading from standard output or standard error.
+
+    \sa launch() QObject::deleteLater()
+*/
+
+/*!
+    Runs the process and writes the data \a buf to the process's
+    standard input. If all the data is written to standard input,
+    standard input is closed. The command is searched for in the path
+    for executable programs; you can also use an absolute path in the
+    command itself.
+
+    If \a env is null, then the process is started with the same
+    environment as the starting process. If \a env is non-null, then
+    the values in the string list are interpreted as environment
+    setttings of the form \c {key=value} and the process is started
+    with these environment settings. For convenience, there is a small
+    exception to this rule under Unix: if \a env does not contain any
+    settings for the environment variable \c LD_LIBRARY_PATH, then
+    this variable is inherited from the starting process.
+
+    Returns true if the process could be started; otherwise returns
+    false.
+
+    Note that you should not use the slots writeToStdin() and
+    closeStdin() on processes started with launch(), since the result
+    is not well-defined. If you need these slots, use start() instead.
+
+    The process may or may not read the \a buf data sent to its
+    standard input.
+
+    You can call this function even when a process that was started
+    with this instance is still running. Be aware that if you do this
+    the standard input of the process that was launched first will be
+    closed, with any pending data being deleted, and the process will
+    be left to run out of your control. Similarly, if the process
+    could not be started the standard input will be closed and the
+    pending data deleted. (On operating systems that have zombie
+    processes, Qt will also wait() on the old process.)
+
+    The object emits the signal launchFinished() when this function
+    call is finished. If the start was successful, this signal is
+    emitted after all the data has been written to standard input. If
+    the start failed, then this signal is emitted immediately.
+
+    \sa start() launchFinished()
+*/
+bool Q3Process::launch( const QByteArray& buf, QStringList *env )
+{
+    if ( start( env ) ) {
+	if ( !buf.isEmpty() ) {
+	    connect( this, SIGNAL(wroteToStdin()),
+		    this, SLOT(closeStdinLaunch()) );
+	    writeToStdin( buf );
+	} else {
+	    closeStdin();
+	    emit launchFinished();
+	}
+	return true;
+    } else {
+	emit launchFinished();
+	return false;
+    }
+}
+
+/*!
+    \overload
+
+    The data \a buf is written to standard input with writeToStdin()
+    using the QString::local8Bit() representation of the strings.
+*/
+bool Q3Process::launch( const QString& buf, QStringList *env )
+{
+    if ( start( env ) ) {
+	if ( !buf.isEmpty() ) {
+	    connect( this, SIGNAL(wroteToStdin()),
+		    this, SLOT(closeStdinLaunch()) );
+	    writeToStdin( buf );
+	} else {
+	    closeStdin();
+	    emit launchFinished();
+	}
+	return true;
+    } else {
+	emit launchFinished();
+	return false;
+    }
+}
+
+/*
+  This private slot is used by the launch() functions to close standard input.
+*/
+void Q3Process::closeStdinLaunch()
+{
+    disconnect( this, SIGNAL(wroteToStdin()),
+	    this, SLOT(closeStdinLaunch()) );
+    closeStdin();
+    emit launchFinished();
+}
+
+
+/*!
+    \fn void Q3Process::readyReadStdout()
+
+    This signal is emitted when the process has written data to
+    standard output. You can read the data with readStdout().
+
+    Note that this signal is only emitted when there is new data and
+    not when there is old, but unread data. In the slot connected to
+    this signal, you should always read everything that is available
+    at that moment to make sure that you don't lose any data.
+
+    \sa readStdout() readLineStdout() readyReadStderr()
+*/
+
+/*!
+    \fn void Q3Process::readyReadStderr()
+
+    This signal is emitted when the process has written data to
+    standard error. You can read the data with readStderr().
+
+    Note that this signal is only emitted when there is new data and
+    not when there is old, but unread data. In the slot connected to
+    this signal, you should always read everything that is available
+    at that moment to make sure that you don't lose any data.
+
+    \sa readStderr() readLineStderr() readyReadStdout()
+*/
+
+/*!
+    \fn void Q3Process::processExited()
+
+    This signal is emitted when the process has exited.
+
+    \sa isRunning() normalExit() exitStatus() start() launch()
+*/
+
+/*!
+    \fn void Q3Process::wroteToStdin()
+
+    This signal is emitted if the data sent to standard input (via
+    writeToStdin()) was actually written to the process. This does not
+    imply that the process really read the data, since this class only
+    detects when it was able to write the data to the operating
+    system. But it is now safe to close standard input without losing
+    pending data.
+
+    \sa writeToStdin() closeStdin()
+*/
+
+
+/*!
+    \overload
+
+    The string \a buf is handled as text using the
+    QString::local8Bit() representation.
+*/
+void Q3Process::writeToStdin( const QString& buf )
+{
+    QByteArray tmp = buf.local8Bit();
+    tmp.resize( buf.length() );
+    writeToStdin( tmp );
+}
+
+
+/*
+ * Under Windows the implementation is not so nice: it is not that easy to
+ * detect when one of the signals should be emitted; therefore there are some
+ * timers that query the information.
+ * To keep it a little efficient, use the timers only when they are needed.
+ * They are needed, if you are interested in the signals. So use
+ * connectNotify() and disconnectNotify() to keep track of your interest.
+ */
+/*!  \reimp
+*/
+void Q3Process::connectNotify( const char * signal )
+{
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::connectNotify(): signal %s has been connected", signal );
+#endif
+    if ( !ioRedirection )
+	if ( qstrcmp( signal, SIGNAL(readyReadStdout()) )==0 ||
+		qstrcmp( signal, SIGNAL(readyReadStderr()) )==0
+	   ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	    qDebug( "Q3Process::connectNotify(): set ioRedirection to true" );
+#endif
+	    setIoRedirection( true );
+	    return;
+	}
+    if ( !notifyOnExit && qstrcmp( signal, SIGNAL(processExited()) )==0 ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::connectNotify(): set notifyOnExit to true" );
+#endif
+	setNotifyOnExit( true );
+	return;
+    }
+    if ( !wroteToStdinConnected && qstrcmp( signal, SIGNAL(wroteToStdin()) )==0 ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::connectNotify(): set wroteToStdinConnected to true" );
+#endif
+	setWroteStdinConnected( true );
+	return;
+    }
+}
+
+/*!  \reimp
+*/
+void Q3Process::disconnectNotify( const char * )
+{
+    if ( ioRedirection &&
+	    receivers( SIGNAL(readyReadStdout()) ) ==0 &&
+	    receivers( SIGNAL(readyReadStderr()) ) ==0
+	    ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::disconnectNotify(): set ioRedirection to false" );
+#endif
+	setIoRedirection( false );
+    }
+    if ( notifyOnExit && receivers( SIGNAL(processExited()) ) == 0 ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::disconnectNotify(): set notifyOnExit to false" );
+#endif
+	setNotifyOnExit( false );
+    }
+    if ( wroteToStdinConnected && receivers( SIGNAL(wroteToStdin()) ) == 0 ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::disconnectNotify(): set wroteToStdinConnected to false" );
+#endif
+	setWroteStdinConnected( false );
+    }
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_PROCESS
diff --git a/src/qt3support/other/q3process.h b/src/qt3support/other/q3process.h
new file mode 100644
index 0000000..ac28390
--- /dev/null
+++ b/src/qt3support/other/q3process.h
@@ -0,0 +1,186 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#ifndef Q3PROCESS_H
+#define Q3PROCESS_H
+
+#include <QtCore/qobject.h>
+#include <QtCore/qstringlist.h>
+#include <QtCore/qdir.h>
+
+QT_BEGIN_HEADER
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3SupportLight)
+
+#ifndef QT_NO_PROCESS
+
+class Q3ProcessPrivate;
+class Q3Membuf;
+
+class Q_COMPAT_EXPORT Q3Process : public QObject
+{
+    Q_OBJECT
+public:
+    Q3Process( QObject *parent=0, const char *name=0 );
+    Q3Process( const QString& arg0, QObject *parent=0, const char *name=0 );
+    Q3Process( const QStringList& args, QObject *parent=0, const char *name=0 );
+    ~Q3Process();
+
+    // set and get the arguments and working directory
+    QStringList arguments() const;
+    void clearArguments();
+    virtual void setArguments( const QStringList& args );
+    virtual void addArgument( const QString& arg );
+#ifndef QT_NO_DIR
+    QDir workingDirectory() const;
+    virtual void setWorkingDirectory( const QDir& dir );
+#endif
+
+    // set and get the comms wanted
+    enum Communication { Stdin=0x01, Stdout=0x02, Stderr=0x04, DupStderr=0x08 };
+    void setCommunication( int c );
+    int communication() const;
+
+    // start the execution
+    virtual bool start( QStringList *env=0 );
+    virtual bool launch( const QString& buf, QStringList *env=0  );
+    virtual bool launch( const QByteArray& buf, QStringList *env=0  );
+
+    // inquire the status
+    bool isRunning() const;
+    bool normalExit() const;
+    int exitStatus() const;
+
+    // reading
+    virtual QByteArray readStdout();
+    virtual QByteArray readStderr();
+    bool canReadLineStdout() const;
+    bool canReadLineStderr() const;
+    virtual QString readLineStdout();
+    virtual QString readLineStderr();
+
+    // get platform dependent process information
+#if defined(Q_OS_WIN32) || defined(Q_OS_WINCE)
+    typedef void* PID;
+#else
+    typedef Q_LONG PID;
+#endif
+    PID processIdentifier();
+
+    void flushStdin();
+
+Q_SIGNALS:
+    void readyReadStdout();
+    void readyReadStderr();
+    void processExited();
+    void wroteToStdin();
+    void launchFinished();
+
+public Q_SLOTS:
+    // end the execution
+    void tryTerminate() const;
+    void kill() const;
+
+    // input
+    virtual void writeToStdin( const QByteArray& buf );
+    virtual void writeToStdin( const QString& buf );
+    virtual void closeStdin();
+
+protected: // ### or private?
+    void connectNotify( const char * signal );
+    void disconnectNotify( const char * signal );
+private:
+    void setIoRedirection( bool value );
+    void setNotifyOnExit( bool value );
+    void setWroteStdinConnected( bool value );
+
+    void init();
+    void reset();
+#if defined(Q_OS_WIN32) || defined(Q_OS_WINCE)
+    uint readStddev( Qt::HANDLE dev, char *buf, uint bytes );
+#endif
+    Q3Membuf* membufStdout();
+    Q3Membuf* membufStderr();
+
+private Q_SLOTS:
+    void socketRead( int fd );
+    void socketWrite( int fd );
+    void timeout();
+    void closeStdinLaunch();
+
+private:
+    Q3ProcessPrivate *d;
+#ifndef QT_NO_DIR
+    QDir        workingDir;
+#endif
+    QStringList _arguments;
+
+    int  exitStat; // exit status
+    bool exitNormal; // normal exit?
+    bool ioRedirection; // automatically set be (dis)connectNotify
+    bool notifyOnExit; // automatically set be (dis)connectNotify
+    bool wroteToStdinConnected; // automatically set be (dis)connectNotify
+
+    bool readStdoutCalled;
+    bool readStderrCalled;
+    int comms;
+
+    friend class Q3ProcessPrivate;
+#if defined(Q_OS_UNIX)
+    friend class Q3ProcessManager;
+    friend class QProc;
+#endif
+
+#if defined(Q_DISABLE_COPY) // Disabled copy constructor and operator=
+    Q3Process( const Q3Process & );
+    Q3Process &operator=( const Q3Process & );
+#endif
+};
+
+#endif // QT_NO_PROCESS
+
+QT_END_NAMESPACE
+
+QT_END_HEADER
+
+#endif // Q3PROCESS_H
diff --git a/src/qt3support/other/q3process_unix.cpp b/src/qt3support/other/q3process_unix.cpp
new file mode 100644
index 0000000..098c581
--- /dev/null
+++ b/src/qt3support/other/q3process_unix.cpp
@@ -0,0 +1,1282 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qplatformdefs.h"
+
+// Solaris redefines connect -> __xnet_connect with _XOPEN_SOURCE_EXTENDED.
+#if defined(connect)
+#undef connect
+#endif
+
+#include "q3process.h"
+
+#ifndef QT_NO_PROCESS
+
+#include "qapplication.h"
+#include "q3cstring.h"
+#include "q3ptrqueue.h"
+#include "q3ptrlist.h"
+#include "qsocketnotifier.h"
+#include "qtimer.h"
+#include "q3cleanuphandler.h"
+#include "qregexp.h"
+#include "private/q3membuf_p.h"
+#include "private/qobject_p.h"
+
+#include <stdlib.h>
+#include <errno.h>
+#include <sys/types.h>
+
+QT_BEGIN_NAMESPACE
+
+#ifdef __MIPSEL__
+# ifndef SOCK_DGRAM
+#  define SOCK_DGRAM 1
+# endif
+# ifndef SOCK_STREAM
+#  define SOCK_STREAM 2
+# endif
+#endif
+
+//#define QT_Q3PROCESS_DEBUG
+
+
+#ifdef Q_C_CALLBACKS
+extern "C" {
+#endif // Q_C_CALLBACKS
+
+    static QT_SIGNAL_RETTYPE qt_C_sigchldHnd(QT_SIGNAL_ARGS);
+
+#ifdef Q_C_CALLBACKS
+}
+#endif // Q_C_CALLBACKS
+
+
+class QProc;
+class Q3ProcessManager;
+class Q3ProcessPrivate
+{
+public:
+    Q3ProcessPrivate();
+    ~Q3ProcessPrivate();
+
+    void closeOpenSocketsForChild();
+    void newProc( pid_t pid, Q3Process *process );
+
+    Q3Membuf bufStdout;
+    Q3Membuf bufStderr;
+
+    Q3PtrQueue<QByteArray> stdinBuf;
+
+    QSocketNotifier *notifierStdin;
+    QSocketNotifier *notifierStdout;
+    QSocketNotifier *notifierStderr;
+
+    ssize_t stdinBufRead;
+    QProc *proc;
+
+    bool exitValuesCalculated;
+    bool socketReadCalled;
+
+    static Q3ProcessManager *procManager;
+};
+
+
+/***********************************************************************
+ *
+ * QProc
+ *
+ **********************************************************************/
+/*
+  The class Q3Process does not necessarily map exactly to the running
+  child processes: if the process is finished, the Q3Process class may still be
+  there; furthermore a user can use Q3Process to start more than one process.
+
+  The helper-class QProc has the semantics that one instance of this class maps
+  directly to a running child process.
+*/
+class QProc
+{
+public:
+    QProc( pid_t p, Q3Process *proc=0 ) : pid(p), process(proc)
+    {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "QProc: Constructor for pid %d and Q3Process %p", pid, process );
+#endif
+	socketStdin = 0;
+	socketStdout = 0;
+	socketStderr = 0;
+    }
+    ~QProc()
+    {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "QProc: Destructor for pid %d and Q3Process %p", pid, process );
+#endif
+	if ( process ) {
+	    if ( process->d->notifierStdin )
+		process->d->notifierStdin->setEnabled( false );
+	    if ( process->d->notifierStdout )
+		process->d->notifierStdout->setEnabled( false );
+	    if ( process->d->notifierStderr )
+		process->d->notifierStderr->setEnabled( false );
+	    process->d->proc = 0;
+	}
+	if( socketStdin )
+	    ::close( socketStdin );
+	if( socketStdout )
+	    ::close( socketStdout );
+	if( socketStderr )
+	    ::close( socketStderr );
+    }
+
+    pid_t pid;
+    int socketStdin;
+    int socketStdout;
+    int socketStderr;
+    Q3Process *process;
+};
+
+/***********************************************************************
+ *
+ * Q3ProcessManager
+ *
+ **********************************************************************/
+class Q3ProcessManager : public QObject
+{
+    Q_OBJECT
+
+public:
+    Q3ProcessManager();
+    ~Q3ProcessManager();
+
+    void append( QProc *p );
+    void remove( QProc *p );
+
+    void cleanup();
+
+public slots:
+    void removeMe();
+    void sigchldHnd( int );
+
+public:
+    struct sigaction oldactChld;
+    struct sigaction oldactPipe;
+    Q3PtrList<QProc> *procList;
+    int sigchldFd[2];
+
+private:
+    QSocketNotifier *sn;
+};
+
+static void q3process_cleanup()
+{
+    delete Q3ProcessPrivate::procManager;
+    Q3ProcessPrivate::procManager = 0;
+}
+
+#ifdef Q_OS_QNX6
+#define BAILOUT close(tmpSocket);close(socketFD[1]);return -1;
+int qnx6SocketPairReplacement (int socketFD[2]) {
+    int tmpSocket;
+    tmpSocket = socket (AF_INET, SOCK_STREAM, 0);
+    if (tmpSocket == -1)
+	return -1;
+    socketFD[1] = socket(AF_INET, SOCK_STREAM, 0);
+    if (socketFD[1] == -1) { BAILOUT };
+
+    sockaddr_in ipAddr;
+    memset(&ipAddr, 0, sizeof(ipAddr));
+    ipAddr.sin_family = AF_INET;
+    ipAddr.sin_addr.s_addr = INADDR_ANY;
+
+    int socketOptions = 1;
+    setsockopt(tmpSocket, SOL_SOCKET, SO_REUSEADDR, &socketOptions, sizeof(int));
+
+    bool found = false;
+    for (int socketIP = 2000; (socketIP < 2500) && !(found); socketIP++) {
+	ipAddr.sin_port = htons(socketIP);
+	if (bind(tmpSocket, (struct sockaddr *)&ipAddr, sizeof(ipAddr)))
+	    found = true;
+    }
+
+    if (listen(tmpSocket, 5)) { BAILOUT };
+
+    // Select non-blocking mode
+    int originalFlags = fcntl(socketFD[1], F_GETFL, 0);
+    fcntl(socketFD[1], F_SETFL, originalFlags | O_NONBLOCK);
+
+    // Request connection
+    if (connect(socketFD[1], (struct sockaddr*)&ipAddr, sizeof(ipAddr)))
+	if (errno != EINPROGRESS) { BAILOUT };
+
+    // Accept connection
+    socketFD[0] = accept(tmpSocket, (struct sockaddr *)NULL, (size_t *)NULL);
+    if(socketFD[0] == -1) { BAILOUT };
+
+    // We're done
+    close(tmpSocket);
+
+    // Restore original flags , ie return to blocking
+    fcntl(socketFD[1], F_SETFL, originalFlags);
+    return 0;
+}
+#undef BAILOUT
+#endif
+
+Q3ProcessManager::Q3ProcessManager() : sn(0)
+{
+    procList = new Q3PtrList<QProc>;
+    procList->setAutoDelete( true );
+
+    // The SIGCHLD handler writes to a socket to tell the manager that
+    // something happened. This is done to get the processing in sync with the
+    // event reporting.
+#ifndef Q_OS_QNX6
+    if ( ::socketpair( AF_UNIX, SOCK_STREAM, 0, sigchldFd ) ) {
+#else
+    if ( qnx6SocketPairReplacement (sigchldFd) ) {
+#endif
+	sigchldFd[0] = 0;
+	sigchldFd[1] = 0;
+    } else {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3ProcessManager: install socket notifier (%d)", sigchldFd[1] );
+#endif
+	sn = new QSocketNotifier( sigchldFd[1],
+		QSocketNotifier::Read, this );
+	connect( sn, SIGNAL(activated(int)),
+		this, SLOT(sigchldHnd(int)) );
+	sn->setEnabled( true );
+    }
+
+    // install a SIGCHLD handler and ignore SIGPIPE
+    struct sigaction act;
+
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager: install a SIGCHLD handler" );
+#endif
+    act.sa_handler = qt_C_sigchldHnd;
+    sigemptyset( &(act.sa_mask) );
+    sigaddset( &(act.sa_mask), SIGCHLD );
+    act.sa_flags = SA_NOCLDSTOP;
+#if defined(SA_RESTART)
+    act.sa_flags |= SA_RESTART;
+#endif
+    if ( sigaction( SIGCHLD, &act, &oldactChld ) != 0 )
+	qWarning( "Error installing SIGCHLD handler" );
+
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager: install a SIGPIPE handler (SIG_IGN)" );
+#endif
+    act.sa_handler = QT_SIGNAL_IGNORE;
+    sigemptyset( &(act.sa_mask) );
+    sigaddset( &(act.sa_mask), SIGPIPE );
+    act.sa_flags = 0;
+    if ( sigaction( SIGPIPE, &act, &oldactPipe ) != 0 )
+	qWarning( "Error installing SIGPIPE handler" );
+}
+
+Q3ProcessManager::~Q3ProcessManager()
+{
+    delete procList;
+
+    if ( sigchldFd[0] != 0 )
+	::close( sigchldFd[0] );
+    if ( sigchldFd[1] != 0 )
+	::close( sigchldFd[1] );
+
+    // restore SIGCHLD handler
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager: restore old sigchild handler" );
+#endif
+    if ( sigaction( SIGCHLD, &oldactChld, 0 ) != 0 )
+	qWarning( "Error restoring SIGCHLD handler" );
+
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager: restore old sigpipe handler" );
+#endif
+    if ( sigaction( SIGPIPE, &oldactPipe, 0 ) != 0 )
+	qWarning( "Error restoring SIGPIPE handler" );
+}
+
+void Q3ProcessManager::append( QProc *p )
+{
+    procList->append( p );
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager: append process (procList.count(): %d)", procList->count() );
+#endif
+}
+
+void Q3ProcessManager::remove( QProc *p )
+{
+    procList->remove( p );
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager: remove process (procList.count(): %d)", procList->count() );
+#endif
+    cleanup();
+}
+
+void Q3ProcessManager::cleanup()
+{
+    if ( procList->count() == 0 ) {
+	QTimer::singleShot( 0, this, SLOT(removeMe()) );
+    }
+}
+
+void Q3ProcessManager::removeMe()
+{
+    if ( procList->count() == 0 ) {
+	qRemovePostRoutine(q3process_cleanup);
+	Q3ProcessPrivate::procManager = 0;
+	delete this;
+    }
+}
+
+void Q3ProcessManager::sigchldHnd( int fd )
+{
+    // Disable the socket notifier to make sure that this function is not
+    // called recursively -- this can happen, if you enter the event loop in
+    // the slot connected to the processExited() signal (e.g. by showing a
+    // modal dialog) and there are more than one process which exited in the
+    // meantime.
+    if ( sn ) {
+	if ( !sn->isEnabled() )
+	    return;
+	sn->setEnabled( false );
+    }
+
+    char tmp;
+    ::read( fd, &tmp, sizeof(tmp) );
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessManager::sigchldHnd()" );
+#endif
+    QProc *proc;
+    Q3Process *process;
+    bool removeProc;
+    proc = procList->first();
+    while ( proc != 0 ) {
+	removeProc = false;
+	process = proc->process;
+	if ( process != 0 ) {
+	    if ( !process->isRunning() ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+		qDebug( "Q3ProcessManager::sigchldHnd() (PID: %d): process exited (Q3Process available)", proc->pid );
+#endif
+		/*
+		  Apparently, there is not consistency among different
+		  operating systems on how to use FIONREAD.
+
+		  FreeBSD, Linux and Solaris all expect the 3rd
+		  argument to ioctl() to be an int, which is normally
+		  32-bit even on 64-bit machines.
+
+		  IRIX, on the other hand, expects a size_t, which is
+		  64-bit on 64-bit machines.
+
+		  So, the solution is to use size_t initialized to
+		  zero to make sure all bits are set to zero,
+		  preventing underflow with the FreeBSD/Linux/Solaris
+		  ioctls.
+		*/
+		size_t nbytes = 0;
+		// read pending data
+		if ( proc->socketStdout && ::ioctl(proc->socketStdout, FIONREAD, (char*)&nbytes)==0 && nbytes>0 ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+		    qDebug( "Q3ProcessManager::sigchldHnd() (PID: %d): reading %d bytes of pending data on stdout", proc->pid, nbytes );
+#endif
+		    process->socketRead( proc->socketStdout );
+		}
+		nbytes = 0;
+		if ( proc->socketStderr && ::ioctl(proc->socketStderr, FIONREAD, (char*)&nbytes)==0 && nbytes>0 ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+		    qDebug( "Q3ProcessManager::sigchldHnd() (PID: %d): reading %d bytes of pending data on stderr", proc->pid, nbytes );
+#endif
+		    process->socketRead( proc->socketStderr );
+		}
+		// close filedescriptors if open, and disable the
+		// socket notifiers
+		if ( proc->socketStdout ) {
+		    ::close( proc->socketStdout );
+		    proc->socketStdout = 0;
+		    if (process->d->notifierStdout)
+			process->d->notifierStdout->setEnabled(false);
+		}
+		if ( proc->socketStderr ) {
+		    ::close( proc->socketStderr );
+		    proc->socketStderr = 0;
+		    if (process->d->notifierStderr)
+			process->d->notifierStderr->setEnabled(false);
+		}
+
+		if ( process->notifyOnExit )
+		    emit process->processExited();
+
+		removeProc = true;
+	    }
+	} else {
+	    int status;
+	    if ( ::waitpid( proc->pid, &status, WNOHANG ) == proc->pid ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+		qDebug( "Q3ProcessManager::sigchldHnd() (PID: %d): process exited (Q3Process not available)", proc->pid );
+#endif
+		removeProc = true;
+	    }
+	}
+	if ( removeProc ) {
+	    QProc *oldproc = proc;
+	    proc = procList->next();
+	    remove( oldproc );
+	} else {
+	    proc = procList->next();
+	}
+    }
+    if ( sn )
+	sn->setEnabled( true );
+}
+
+QT_BEGIN_INCLUDE_NAMESPACE
+#include "q3process_unix.moc"
+QT_END_INCLUDE_NAMESPACE
+
+
+/***********************************************************************
+ *
+ * Q3ProcessPrivate
+ *
+ **********************************************************************/
+Q3ProcessManager *Q3ProcessPrivate::procManager = 0;
+
+Q3ProcessPrivate::Q3ProcessPrivate()
+{
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessPrivate: Constructor" );
+#endif
+    stdinBufRead = 0;
+
+    notifierStdin = 0;
+    notifierStdout = 0;
+    notifierStderr = 0;
+
+    exitValuesCalculated = false;
+    socketReadCalled = false;
+
+    proc = 0;
+}
+
+Q3ProcessPrivate::~Q3ProcessPrivate()
+{
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3ProcessPrivate: Destructor" );
+#endif
+
+    if ( proc != 0 ) {
+	if ( proc->socketStdin != 0 ) {
+	    ::close( proc->socketStdin );
+	    proc->socketStdin = 0;
+	}
+	proc->process = 0;
+    }
+
+    while ( !stdinBuf.isEmpty() ) {
+	delete stdinBuf.dequeue();
+    }
+    delete notifierStdin;
+    delete notifierStdout;
+    delete notifierStderr;
+}
+
+/*
+  Closes all open sockets in the child process that are not needed by the child
+  process. Otherwise one child may have an open socket on standard input, etc.
+  of another child.
+*/
+void Q3ProcessPrivate::closeOpenSocketsForChild()
+{
+    if ( procManager != 0 ) {
+	if ( procManager->sigchldFd[0] != 0 )
+	    ::close( procManager->sigchldFd[0] );
+	if ( procManager->sigchldFd[1] != 0 )
+	    ::close( procManager->sigchldFd[1] );
+
+	// close also the sockets from other Q3Process instances
+	for ( QProc *p=procManager->procList->first(); p!=0; p=procManager->procList->next() ) {
+	    ::close( p->socketStdin );
+	    ::close( p->socketStdout );
+	    ::close( p->socketStderr );
+	}
+    }
+}
+
+void Q3ProcessPrivate::newProc( pid_t pid, Q3Process *process )
+{
+    proc = new QProc( pid, process );
+    if ( procManager == 0 ) {
+	procManager = new Q3ProcessManager;
+	qAddPostRoutine(q3process_cleanup);
+    }
+    // the Q3ProcessManager takes care of deleting the QProc instances
+    procManager->append( proc );
+}
+
+/***********************************************************************
+ *
+ * sigchld handler callback
+ *
+ **********************************************************************/
+static QT_SIGNAL_RETTYPE qt_C_sigchldHnd(QT_SIGNAL_ARGS)
+{
+    if ( Q3ProcessPrivate::procManager == 0 )
+	return;
+    if ( Q3ProcessPrivate::procManager->sigchldFd[0] == 0 )
+	return;
+
+    char a = 1;
+    ::write( Q3ProcessPrivate::procManager->sigchldFd[0], &a, sizeof(a) );
+}
+
+
+/***********************************************************************
+ *
+ * Q3Process
+ *
+ **********************************************************************/
+/*
+  This private class does basic initialization.
+*/
+void Q3Process::init()
+{
+    d = new Q3ProcessPrivate();
+    exitStat = 0;
+    exitNormal = false;
+}
+
+/*
+  This private class resets the process variables, etc. so that it can be used
+  for another process to start.
+*/
+void Q3Process::reset()
+{
+    delete d;
+    d = new Q3ProcessPrivate();
+    exitStat = 0;
+    exitNormal = false;
+    d->bufStdout.clear();
+    d->bufStderr.clear();
+}
+
+Q3Membuf* Q3Process::membufStdout()
+{
+    if ( d->proc && d->proc->socketStdout ) {
+	/*
+	  Apparently, there is not consistency among different
+	  operating systems on how to use FIONREAD.
+
+	  FreeBSD, Linux and Solaris all expect the 3rd argument to
+	  ioctl() to be an int, which is normally 32-bit even on
+	  64-bit machines.
+
+	  IRIX, on the other hand, expects a size_t, which is 64-bit
+	  on 64-bit machines.
+
+	  So, the solution is to use size_t initialized to zero to
+	  make sure all bits are set to zero, preventing underflow
+	  with the FreeBSD/Linux/Solaris ioctls.
+	*/
+	size_t nbytes = 0;
+	if ( ::ioctl(d->proc->socketStdout, FIONREAD, (char*)&nbytes)==0 && nbytes>0 )
+	    socketRead( d->proc->socketStdout );
+    }
+    return &d->bufStdout;
+}
+
+Q3Membuf* Q3Process::membufStderr()
+{
+    if ( d->proc && d->proc->socketStderr ) {
+	/*
+	  Apparently, there is not consistency among different
+	  operating systems on how to use FIONREAD.
+
+	  FreeBSD, Linux and Solaris all expect the 3rd argument to
+	  ioctl() to be an int, which is normally 32-bit even on
+	  64-bit machines.
+
+	  IRIX, on the other hand, expects a size_t, which is 64-bit
+	  on 64-bit machines.
+
+	  So, the solution is to use size_t initialized to zero to
+	  make sure all bits are set to zero, preventing underflow
+	  with the FreeBSD/Linux/Solaris ioctls.
+	*/
+	size_t nbytes = 0;
+	if ( ::ioctl(d->proc->socketStderr, FIONREAD, (char*)&nbytes)==0 && nbytes>0 )
+	    socketRead( d->proc->socketStderr );
+    }
+    return &d->bufStderr;
+}
+
+Q3Process::~Q3Process()
+{
+    delete d;
+}
+
+bool Q3Process::start( QStringList *env )
+{
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::start()" );
+#endif
+    reset();
+
+    int sStdin[2];
+    int sStdout[2];
+    int sStderr[2];
+
+    // open sockets for piping
+#ifndef Q_OS_QNX6
+    if ( (comms & Stdin) && ::socketpair( AF_UNIX, SOCK_STREAM, 0, sStdin ) == -1 ) {
+#else
+    if ( (comms & Stdin) && qnx6SocketPairReplacement(sStdin) == -1 ) {
+#endif
+	return false;
+    }
+#ifndef Q_OS_QNX6
+    if ( (comms & Stderr) && ::socketpair( AF_UNIX, SOCK_STREAM, 0, sStderr ) == -1 ) {
+#else
+    if ( (comms & Stderr) && qnx6SocketPairReplacement(sStderr) == -1 ) {
+#endif
+	if ( comms & Stdin ) {
+	    ::close( sStdin[0] );
+	    ::close( sStdin[1] );
+	}
+	return false;
+    }
+#ifndef Q_OS_QNX6
+    if ( (comms & Stdout) && ::socketpair( AF_UNIX, SOCK_STREAM, 0, sStdout ) == -1 ) {
+#else
+    if ( (comms & Stdout) && qnx6SocketPairReplacement(sStdout) == -1 ) {
+#endif
+	if ( comms & Stdin ) {
+	    ::close( sStdin[0] );
+	    ::close( sStdin[1] );
+	}
+	if ( comms & Stderr ) {
+	    ::close( sStderr[0] );
+	    ::close( sStderr[1] );
+	}
+	return false;
+    }
+
+    // the following pipe is only used to determine if the process could be
+    // started
+    int fd[2];
+    if ( pipe( fd ) < 0 ) {
+	// non critical error, go on
+	fd[0] = 0;
+	fd[1] = 0;
+    }
+
+    // construct the arguments for exec
+    Q3CString *arglistQ = new Q3CString[ _arguments.count() + 1 ];
+    const char** arglist = new const char*[ _arguments.count() + 1 ];
+    int i = 0;
+    for ( QStringList::Iterator it = _arguments.begin(); it != _arguments.end(); ++it ) {
+	arglistQ[i] = (*it).local8Bit();
+	arglist[i] = arglistQ[i];
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::start(): arg %d = %s", i, arglist[i] );
+#endif
+	i++;
+    }
+#ifdef Q_OS_MACX
+    if(i) {
+	Q3CString arg_bundle = arglistQ[0];
+	QFileInfo fi(QString::fromUtf8(arg_bundle.constData()));
+	if(fi.exists() && fi.isDir() && arg_bundle.right(4) == ".app") {
+	    Q3CString exe = arg_bundle;
+	    int lslash = exe.findRev('/');
+	    if(lslash != -1)
+		exe = exe.mid(lslash+1);
+	    exe = Q3CString(arg_bundle + "/Contents/MacOS/" + exe);
+	    exe = exe.left(exe.length() - 4); //chop off the .app
+	    if(QFile::exists(QString::fromLatin1(exe.constData()))) {
+		arglistQ[0] = exe;
+		arglist[0] = arglistQ[0];
+	    }
+	}
+    }
+#endif
+    arglist[i] = 0;
+
+    // Must make sure signal handlers are installed before exec'ing
+    // in case the process exits quickly.
+    if ( d->procManager == 0 ) {
+	d->procManager = new Q3ProcessManager;
+	qAddPostRoutine(q3process_cleanup);
+    }
+
+    // fork and exec
+    QApplication::flushX();
+    pid_t pid = fork();
+    if ( pid == 0 ) {
+	// child
+	d->closeOpenSocketsForChild();
+	if ( comms & Stdin ) {
+	    ::close( sStdin[1] );
+	    ::dup2( sStdin[0], STDIN_FILENO );
+	}
+	if ( comms & Stdout ) {
+	    ::close( sStdout[0] );
+	    ::dup2( sStdout[1], STDOUT_FILENO );
+	}
+	if ( comms & Stderr ) {
+	    ::close( sStderr[0] );
+	    ::dup2( sStderr[1], STDERR_FILENO );
+	}
+	if ( comms & DupStderr ) {
+	    ::dup2( STDOUT_FILENO, STDERR_FILENO );
+	}
+#ifndef QT_NO_DIR
+	::chdir( workingDir.absPath().latin1() );
+#endif
+	if ( fd[0] )
+	    ::close( fd[0] );
+	if ( fd[1] )
+	    ::fcntl( fd[1], F_SETFD, FD_CLOEXEC ); // close on exec shows success
+
+	if ( env == 0 ) { // inherit environment and start process
+#ifndef Q_OS_QNX4
+	    ::execvp( arglist[0], (char*const*)arglist ); // ### cast not nice
+#else
+	    ::execvp( arglist[0], (char const*const*)arglist ); // ### cast not nice
+#endif
+	} else { // start process with environment settins as specified in env
+	    // construct the environment for exec
+	    int numEntries = env->count();
+#if defined(Q_OS_MACX)
+	    QString ld_library_path(QLatin1String("DYLD_LIBRARY_PATH"));
+#else
+	    QString ld_library_path(QLatin1String("LD_LIBRARY_PATH"));
+#endif
+	    bool setLibraryPath =
+		env->grep( QRegExp( QLatin1Char('^') + ld_library_path + QLatin1Char('=') ) ).empty() &&
+		getenv( ld_library_path.local8Bit() ) != 0;
+	    if ( setLibraryPath )
+		numEntries++;
+	    Q3CString *envlistQ = new Q3CString[ numEntries + 1 ];
+	    const char** envlist = new const char*[ numEntries + 1 ];
+	    int i = 0;
+	    if ( setLibraryPath ) {
+		envlistQ[i] = QString( ld_library_path + QLatin1String("=%1") ).arg( QString::fromLocal8Bit(getenv( ld_library_path.local8Bit() )) ).local8Bit();
+		envlist[i] = envlistQ[i];
+		i++;
+	    }
+	    for ( QStringList::Iterator it = env->begin(); it != env->end(); ++it ) {
+		envlistQ[i] = (*it).local8Bit();
+		envlist[i] = envlistQ[i];
+		i++;
+	    }
+	    envlist[i] = 0;
+
+	    // look for the executable in the search path
+	    if ( _arguments.count()>0 && getenv("PATH")!=0 ) {
+		QString command = _arguments[0];
+		if ( !command.contains( QLatin1Char('/') ) ) {
+		    QStringList pathList = QStringList::split( QLatin1Char(':'), QString::fromLocal8Bit(getenv( "PATH" )) );
+		    for (QStringList::Iterator it = pathList.begin(); it != pathList.end(); ++it ) {
+			QString dir = *it;
+#if defined(Q_OS_MACX) //look in a bundle
+			if(!QFile::exists(dir + QLatin1Char('/') + command) && QFile::exists(dir + QLatin1Char('/') + command + QLatin1String(".app")))
+			    dir += QLatin1Char('/') + command + QLatin1String(".app/Contents/MacOS");
+#endif
+#ifndef QT_NO_DIR
+			QFileInfo fileInfo( dir, command );
+#else
+			QFileInfo fileInfo( dir + "/" + command );
+#endif
+			if ( fileInfo.isExecutable() ) {
+#if defined(Q_OS_MACX)
+			    arglistQ[0] = fileInfo.absFilePath().local8Bit();
+#else
+			    arglistQ[0] = fileInfo.filePath().local8Bit();
+#endif
+			    arglist[0] = arglistQ[0];
+			    break;
+			}
+		    }
+		}
+	    }
+#ifndef Q_OS_QNX4
+	    ::execve( arglist[0], (char*const*)arglist, (char*const*)envlist ); // ### casts not nice
+#else
+	    ::execve( arglist[0], (char const*const*)arglist,(char const*const*)envlist ); // ### casts not nice
+#endif
+	}
+	if ( fd[1] ) {
+	    char buf = 0;
+	    ::write( fd[1], &buf, 1 );
+	    ::close( fd[1] );
+	}
+	::_exit( -1 );
+    } else if ( pid == -1 ) {
+	// error forking
+	goto error;
+    }
+
+    // test if exec was successful
+    if ( fd[1] )
+	::close( fd[1] );
+    if ( fd[0] ) {
+	char buf;
+	for ( ;; ) {
+	    int n = ::read( fd[0], &buf, 1 );
+	    if ( n==1 ) {
+		// socket was not closed => error
+		if ( ::waitpid( pid, 0, WNOHANG ) != pid ) {
+		    // The wait did not succeed yet, so try again when we get
+		    // the sigchild (to avoid zombies).
+		    d->newProc( pid, 0 );
+		}
+		d->proc = 0;
+		goto error;
+	    } else if ( n==-1 ) {
+		if ( errno==EAGAIN || errno==EINTR )
+		    // try it again
+		    continue;
+	    }
+	    break;
+	}
+	::close( fd[0] );
+    }
+
+    d->newProc( pid, this );
+
+    if ( comms & Stdin ) {
+	::close( sStdin[0] );
+	d->proc->socketStdin = sStdin[1];
+
+	// Select non-blocking mode
+	int originalFlags = fcntl(d->proc->socketStdin, F_GETFL, 0);
+	fcntl(d->proc->socketStdin, F_SETFL, originalFlags | O_NONBLOCK);
+
+	d->notifierStdin = new QSocketNotifier( sStdin[1], QSocketNotifier::Write );
+	connect( d->notifierStdin, SIGNAL(activated(int)),
+		this, SLOT(socketWrite(int)) );
+	// setup notifiers for the sockets
+	if ( !d->stdinBuf.isEmpty() ) {
+	    d->notifierStdin->setEnabled( true );
+	}
+    }
+    if ( comms & Stdout ) {
+	::close( sStdout[1] );
+	d->proc->socketStdout = sStdout[0];
+	d->notifierStdout = new QSocketNotifier( sStdout[0], QSocketNotifier::Read );
+	connect( d->notifierStdout, SIGNAL(activated(int)),
+		this, SLOT(socketRead(int)) );
+	if ( ioRedirection )
+	    d->notifierStdout->setEnabled( true );
+    }
+    if ( comms & Stderr ) {
+	::close( sStderr[1] );
+	d->proc->socketStderr = sStderr[0];
+	d->notifierStderr = new QSocketNotifier( sStderr[0], QSocketNotifier::Read );
+	connect( d->notifierStderr, SIGNAL(activated(int)),
+		this, SLOT(socketRead(int)) );
+	if ( ioRedirection )
+	    d->notifierStderr->setEnabled( true );
+    }
+
+    // cleanup and return
+    delete[] arglistQ;
+    delete[] arglist;
+    return true;
+
+error:
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::start(): error starting process" );
+#endif
+    if ( d->procManager )
+	d->procManager->cleanup();
+    if ( comms & Stdin ) {
+	::close( sStdin[1] );
+	::close( sStdin[0] );
+    }
+    if ( comms & Stdout ) {
+	::close( sStdout[0] );
+	::close( sStdout[1] );
+    }
+    if ( comms & Stderr ) {
+	::close( sStderr[0] );
+	::close( sStderr[1] );
+    }
+    ::close( fd[0] );
+    ::close( fd[1] );
+    delete[] arglistQ;
+    delete[] arglist;
+    return false;
+}
+
+
+void Q3Process::tryTerminate() const
+{
+    if ( d->proc != 0 )
+	::kill( d->proc->pid, SIGTERM );
+}
+
+void Q3Process::kill() const
+{
+    if ( d->proc != 0 )
+	::kill( d->proc->pid, SIGKILL );
+}
+
+bool Q3Process::isRunning() const
+{
+    if ( d->exitValuesCalculated ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::isRunning(): false (already computed)" );
+#endif
+	return false;
+    }
+    if ( d->proc == 0 )
+	return false;
+    int status;
+    if ( ::waitpid( d->proc->pid, &status, WNOHANG ) == d->proc->pid ) {
+	// compute the exit values
+	Q3Process *that = (Q3Process*)this; // mutable
+	that->exitNormal = WIFEXITED( status ) != 0;
+	if ( exitNormal ) {
+	    that->exitStat = (char)WEXITSTATUS( status );
+	}
+	d->exitValuesCalculated = true;
+
+	// On heavy processing, the socket notifier for the sigchild might not
+	// have found time to fire yet.
+	if ( d->procManager && d->procManager->sigchldFd[1] < FD_SETSIZE ) {
+	    fd_set fds;
+	    struct timeval tv;
+	    FD_ZERO( &fds );
+	    FD_SET( d->procManager->sigchldFd[1], &fds );
+	    tv.tv_sec = 0;
+	    tv.tv_usec = 0;
+	    if ( ::select( d->procManager->sigchldFd[1]+1, &fds, 0, 0, &tv ) > 0 )
+		d->procManager->sigchldHnd( d->procManager->sigchldFd[1] );
+	}
+
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::isRunning() (PID: %d): false", d->proc->pid );
+#endif
+	return false;
+    }
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::isRunning() (PID: %d): true", d->proc->pid );
+#endif
+    return true;
+}
+
+bool Q3Process::canReadLineStdout() const
+{
+    if ( !d->proc || !d->proc->socketStdout )
+	return d->bufStdout.size() != 0;
+
+    Q3Process *that = (Q3Process*)this;
+    return that->membufStdout()->scanNewline( 0 );
+}
+
+bool Q3Process::canReadLineStderr() const
+{
+    if ( !d->proc || !d->proc->socketStderr )
+	return d->bufStderr.size() != 0;
+
+    Q3Process *that = (Q3Process*)this;
+    return that->membufStderr()->scanNewline( 0 );
+}
+
+void Q3Process::writeToStdin( const QByteArray& buf )
+{
+#if defined(QT_Q3PROCESS_DEBUG)
+//    qDebug( "Q3Process::writeToStdin(): write to stdin (%d)", d->socketStdin );
+#endif
+    d->stdinBuf.enqueue( new QByteArray(buf) );
+    if ( d->notifierStdin != 0 )
+	d->notifierStdin->setEnabled( true );
+}
+
+
+void Q3Process::closeStdin()
+{
+    if ( d->proc == 0 )
+	return;
+    if ( d->proc->socketStdin !=0 ) {
+	while ( !d->stdinBuf.isEmpty() ) {
+	    delete d->stdinBuf.dequeue();
+	}
+	d->notifierStdin->setEnabled(false);
+	qDeleteInEventHandler(d->notifierStdin);
+	d->notifierStdin = 0;
+	if ( ::close( d->proc->socketStdin ) != 0 ) {
+	    qWarning( "Could not close stdin of child process" );
+	}
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::closeStdin(): stdin (%d) closed", d->proc->socketStdin );
+#endif
+	d->proc->socketStdin = 0;
+    }
+}
+
+
+/*
+  This private slot is called when the process has outputted data to either
+  standard output or standard error.
+*/
+void Q3Process::socketRead( int fd )
+{
+    if ( d->socketReadCalled ) {
+	// the slots that are connected to the readyRead...() signals might
+	// trigger a recursive call of socketRead(). Avoid this since you get a
+	// blocking read otherwise.
+	return;
+    }
+
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::socketRead(): %d", fd );
+#endif
+    if ( fd == 0 )
+	return;
+    if ( !d->proc )
+	return;
+    Q3Membuf *buffer = 0;
+    int n;
+    if ( fd == d->proc->socketStdout ) {
+	buffer = &d->bufStdout;
+    } else if ( fd == d->proc->socketStderr ) {
+	buffer = &d->bufStderr;
+    } else {
+	// this case should never happen, but just to be safe
+	return;
+    }
+#if defined(QT_Q3PROCESS_DEBUG)
+    uint oldSize = buffer->size();
+#endif
+
+    // try to read data first (if it fails, the filedescriptor was closed)
+    const int basize = 4096;
+    QByteArray *ba = new QByteArray( basize );
+    n = ::read( fd, ba->data(), basize );
+    if ( n > 0 ) {
+	ba->resize( n );
+	buffer->append( ba );
+	ba = 0;
+    } else {
+	delete ba;
+	ba = 0;
+    }
+    // eof or error?
+    if ( n == 0 || n == -1 ) {
+	if ( fd == d->proc->socketStdout ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	    qDebug( "Q3Process::socketRead(): stdout (%d) closed", fd );
+#endif
+	    d->notifierStdout->setEnabled( false );
+	    qDeleteInEventHandler(d->notifierStdout);
+	    d->notifierStdout = 0;
+	    ::close( d->proc->socketStdout );
+	    d->proc->socketStdout = 0;
+	    return;
+	} else if ( fd == d->proc->socketStderr ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	    qDebug( "Q3Process::socketRead(): stderr (%d) closed", fd );
+#endif
+	    d->notifierStderr->setEnabled( false );
+	    qDeleteInEventHandler(d->notifierStderr);
+	    d->notifierStderr = 0;
+	    ::close( d->proc->socketStderr );
+	    d->proc->socketStderr = 0;
+	    return;
+	}
+    }
+
+    if ( fd < FD_SETSIZE ) {
+	fd_set fds;
+	struct timeval tv;
+	FD_ZERO( &fds );
+	FD_SET( fd, &fds );
+	tv.tv_sec = 0;
+	tv.tv_usec = 0;
+	while ( ::select( fd+1, &fds, 0, 0, &tv ) > 0 ) {
+	    // prepare for the next round
+	    FD_ZERO( &fds );
+	    FD_SET( fd, &fds );
+	    // read data
+	    ba = new QByteArray( basize );
+	    n = ::read( fd, ba->data(), basize );
+	    if ( n > 0 ) {
+		ba->resize( n );
+		buffer->append( ba );
+		ba = 0;
+	    } else {
+		delete ba;
+		ba = 0;
+		break;
+	    }
+	}
+    }
+
+    d->socketReadCalled = true;
+    if ( fd == d->proc->socketStdout ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::socketRead(): %d bytes read from stdout (%d)",
+		buffer->size()-oldSize, fd );
+#endif
+	emit readyReadStdout();
+    } else if ( fd == d->proc->socketStderr ) {
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::socketRead(): %d bytes read from stderr (%d)",
+		buffer->size()-oldSize, fd );
+#endif
+	emit readyReadStderr();
+    }
+    d->socketReadCalled = false;
+}
+
+
+/*
+  This private slot is called when the process tries to read data from standard
+  input.
+*/
+void Q3Process::socketWrite( int fd )
+{
+    while ( fd == d->proc->socketStdin && d->proc->socketStdin != 0 ) {
+	if ( d->stdinBuf.isEmpty() ) {
+	    d->notifierStdin->setEnabled( false );
+	    return;
+	}
+	ssize_t ret = ::write( fd,
+		d->stdinBuf.head()->data() + d->stdinBufRead,
+		d->stdinBuf.head()->size() - d->stdinBufRead );
+#if defined(QT_Q3PROCESS_DEBUG)
+	qDebug( "Q3Process::socketWrite(): wrote %d bytes to stdin (%d)", ret, fd );
+#endif
+	if ( ret == -1 )
+	    return;
+	d->stdinBufRead += ret;
+	if ( d->stdinBufRead == (ssize_t)d->stdinBuf.head()->size() ) {
+	    d->stdinBufRead = 0;
+	    delete d->stdinBuf.dequeue();
+	    if ( wroteToStdinConnected && d->stdinBuf.isEmpty() )
+		emit wroteToStdin();
+	}
+    }
+}
+
+/*!
+  \internal
+  Flushes standard input. This is useful if you want to use Q3Process in a
+  synchronous manner.
+
+  This function should probably go into the public API.
+*/
+void Q3Process::flushStdin()
+{
+    if (d->proc)
+        socketWrite(d->proc->socketStdin);
+}
+
+/*
+  This private slot is only used under Windows (but moc does not know about #if
+  defined()).
+*/
+void Q3Process::timeout()
+{
+}
+
+
+/*
+  This private function is used by connectNotify() and disconnectNotify() to
+  change the value of ioRedirection (and related behaviour)
+*/
+void Q3Process::setIoRedirection( bool value )
+{
+    ioRedirection = value;
+    if ( ioRedirection ) {
+	if ( d->notifierStdout )
+	    d->notifierStdout->setEnabled( true );
+	if ( d->notifierStderr )
+	    d->notifierStderr->setEnabled( true );
+    } else {
+	if ( d->notifierStdout )
+	    d->notifierStdout->setEnabled( false );
+	if ( d->notifierStderr )
+	    d->notifierStderr->setEnabled( false );
+    }
+}
+
+/*
+  This private function is used by connectNotify() and
+  disconnectNotify() to change the value of notifyOnExit (and related
+  behaviour)
+*/
+void Q3Process::setNotifyOnExit( bool value )
+{
+    notifyOnExit = value;
+}
+
+/*
+  This private function is used by connectNotify() and disconnectNotify() to
+  change the value of wroteToStdinConnected (and related behaviour)
+*/
+void Q3Process::setWroteStdinConnected( bool value )
+{
+    wroteToStdinConnected = value;
+}
+
+/*!
+    \typedef Q3Process::PID
+    \internal
+*/
+
+Q3Process::PID Q3Process::processIdentifier()
+{
+    if ( d->proc == 0 )
+	return -1;
+    return d->proc->pid;
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_PROCESS
diff --git a/src/qt3support/other/q3process_win.cpp b/src/qt3support/other/q3process_win.cpp
new file mode 100644
index 0000000..3c862ee
--- /dev/null
+++ b/src/qt3support/other/q3process_win.cpp
@@ -0,0 +1,676 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include "qplatformdefs.h"
+#include "q3process.h"
+
+#ifndef QT_NO_PROCESS
+
+#include "qapplication.h"
+#include "q3cstring.h"
+#include "q3ptrqueue.h"
+#include "qtimer.h"
+#include "qregexp.h"
+#include "private/q3membuf_p.h"
+#include "qt_windows.h"
+
+#ifdef Q_OS_WINCE
+#define STARTF_USESTDHANDLES 1
+#endif
+
+QT_BEGIN_NAMESPACE
+
+//#define QT_Q3PROCESS_DEBUG
+
+/***********************************************************************
+ *
+ * Q3ProcessPrivate
+ *
+ **********************************************************************/
+class Q3ProcessPrivate
+{
+public:
+    Q3ProcessPrivate( Q3Process *proc )
+    {
+	stdinBufRead = 0;
+	pipeStdin[0] = 0;
+	pipeStdin[1] = 0;
+	pipeStdout[0] = 0;
+	pipeStdout[1] = 0;
+	pipeStderr[0] = 0;
+	pipeStderr[1] = 0;
+	exitValuesCalculated = false;
+
+	lookup = new QTimer( proc );
+	qApp->connect( lookup, SIGNAL(timeout()),
+		proc, SLOT(timeout()) );
+
+	pid = 0;
+    }
+
+    ~Q3ProcessPrivate()
+    {
+	reset();
+    }
+
+    void reset()
+    {
+	while ( !stdinBuf.isEmpty() ) {
+	    delete stdinBuf.dequeue();
+	}
+	closeHandles();
+	stdinBufRead = 0;
+	pipeStdin[0] = 0;
+	pipeStdin[1] = 0;
+	pipeStdout[0] = 0;
+	pipeStdout[1] = 0;
+	pipeStderr[0] = 0;
+	pipeStderr[1] = 0;
+	exitValuesCalculated = false;
+
+	deletePid();
+    }
+
+    void closeHandles()
+    {
+	if( pipeStdin[1] != 0 ) {
+	    CloseHandle( pipeStdin[1] );
+	    pipeStdin[1] = 0;
+	}
+	if( pipeStdout[0] != 0 ) {
+	    CloseHandle( pipeStdout[0] );
+	    pipeStdout[0] = 0;
+	}
+	if( pipeStderr[0] != 0 ) {
+	    CloseHandle( pipeStderr[0] );
+	    pipeStderr[0] = 0;
+	}
+    }
+
+    void deletePid()
+    {
+	if ( pid ) {
+	    CloseHandle( pid->hProcess );
+	    CloseHandle( pid->hThread );
+	    delete pid;
+	    pid = 0;
+	}
+    }
+
+    void newPid()
+    {
+	deletePid();
+	pid = new PROCESS_INFORMATION;
+	memset( pid, 0, sizeof(PROCESS_INFORMATION) );
+    }
+
+    Q3Membuf bufStdout;
+    Q3Membuf bufStderr;
+
+    Q3PtrQueue<QByteArray> stdinBuf;
+
+    HANDLE pipeStdin[2];
+    HANDLE pipeStdout[2];
+    HANDLE pipeStderr[2];
+    QTimer *lookup;
+
+    PROCESS_INFORMATION *pid;
+    uint stdinBufRead;
+
+    bool exitValuesCalculated;
+};
+
+
+/***********************************************************************
+ *
+ * Q3Process
+ *
+ **********************************************************************/
+void Q3Process::init()
+{
+    d = new Q3ProcessPrivate( this );
+    exitStat = 0;
+    exitNormal = false;
+}
+
+void Q3Process::reset()
+{
+    d->reset();
+    exitStat = 0;
+    exitNormal = false;
+    d->bufStdout.clear();
+    d->bufStderr.clear();
+}
+
+Q3Membuf* Q3Process::membufStdout()
+{
+    if( d->pipeStdout[0] != 0 )
+	socketRead( 1 );
+    return &d->bufStdout;
+}
+
+Q3Membuf* Q3Process::membufStderr()
+{
+    if( d->pipeStderr[0] != 0 )
+	socketRead( 2 );
+    return &d->bufStderr;
+}
+
+Q3Process::~Q3Process()
+{
+    delete d;
+}
+
+bool Q3Process::start( QStringList *env )
+{
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::start()" );
+#endif
+    reset();
+
+    if ( _arguments.isEmpty() )
+	return false;
+
+    // Open the pipes.  Make non-inheritable copies of input write and output
+    // read handles to avoid non-closable handles (this is done by the
+    // DuplicateHandle() call).
+    SECURITY_ATTRIBUTES secAtt = { sizeof( SECURITY_ATTRIBUTES ), NULL, TRUE };
+#ifndef Q_OS_WINCE
+    // I guess there is no stdin stdout and stderr on Q_OS_WINCE to dup
+    // CreatePipe and DupilcateHandle aren't available for Q_OS_WINCE
+    HANDLE tmpStdin, tmpStdout, tmpStderr;
+    if ( comms & Stdin ) {
+	if ( !CreatePipe( &d->pipeStdin[0], &tmpStdin, &secAtt, 0 ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+	if ( !DuplicateHandle( GetCurrentProcess(), tmpStdin, GetCurrentProcess(), &d->pipeStdin[1], 0, FALSE, DUPLICATE_SAME_ACCESS ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+	if ( !CloseHandle( tmpStdin ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+    }
+    if ( comms & Stdout ) {
+	if ( !CreatePipe( &tmpStdout, &d->pipeStdout[1], &secAtt, 0 ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+	if ( !DuplicateHandle( GetCurrentProcess(), tmpStdout, GetCurrentProcess(), &d->pipeStdout[0], 0, FALSE, DUPLICATE_SAME_ACCESS ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+	if ( !CloseHandle( tmpStdout ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+    }
+    if ( comms & Stderr ) {
+	if ( !CreatePipe( &tmpStderr, &d->pipeStderr[1], &secAtt, 0 ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+	if ( !DuplicateHandle( GetCurrentProcess(), tmpStderr, GetCurrentProcess(), &d->pipeStderr[0], 0, FALSE, DUPLICATE_SAME_ACCESS ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+	if ( !CloseHandle( tmpStderr ) ) {
+	    d->closeHandles();
+	    return false;
+	}
+    }
+    if ( comms & DupStderr ) {
+	CloseHandle( d->pipeStderr[1] );
+	d->pipeStderr[1] = d->pipeStdout[1];
+    }
+#endif
+
+    // construct the arguments for CreateProcess()
+    QString args;
+    QString appName;
+    QStringList::Iterator it = _arguments.begin();
+    args = *it;
+    ++it;
+    if ( args.endsWith( QLatin1String(".bat") ) && args.contains( QLatin1Char(' ') ) ) {
+	// CreateProcess() seems to have a strange semantics (see also
+	// http://www.experts-exchange.com/Programming/Programming_Platforms/Win_Prog/Q_11138647.html):
+	// If you start a batch file with spaces in the filename, the first
+	// argument to CreateProcess() must be the name of the batchfile
+	// without quotes, but the second argument must start with the same
+	// argument with quotes included. But if the same approach is used for
+	// .exe files, it doesn't work.
+	appName = args;
+	args = QLatin1Char('"') + args + QLatin1Char('"');
+    }
+    for ( ; it != _arguments.end(); ++it ) {
+	QString tmp = *it;
+	// escape a single " because the arguments will be parsed
+	tmp.replace( QLatin1String("\""), QLatin1String("\\\"") );
+	if ( tmp.isEmpty() || tmp.contains( QLatin1Char(' ') ) || tmp.contains( QLatin1Char('\t') ) ) {
+	    // The argument must not end with a \ since this would be interpreted
+	    // as escaping the quote -- rather put the \ behind the quote: e.g.
+	    // rather use "foo"\ than "foo\"
+	    QString endQuote( QLatin1String("\"") );
+	    int i = tmp.length();
+	    while ( i>0 && tmp.at( i-1 ) == QLatin1Char('\\') ) {
+		--i;
+		endQuote += QLatin1String("\\");
+	    }
+	    args += QString( QLatin1String(" \"") ) + tmp.left( i ) + endQuote;
+	} else {
+	    args += QLatin1Char(' ') + tmp;
+	}
+    }
+#if defined(QT_Q3PROCESS_DEBUG)
+    qDebug( "Q3Process::start(): args [%s]", args.latin1() );
+#endif
+
+    // CreateProcess()
+    bool success;
+    d->newPid();
+#ifdef UNICODE
+    if (!(QSysInfo::WindowsVersion & QSysInfo::WV_DOS_based)) {
+	STARTUPINFOW startupInfo = {
+	    sizeof( STARTUPINFO ), 0, 0, 0,
+	    (ulong)CW_USEDEFAULT, (ulong)CW_USEDEFAULT, (ulong)CW_USEDEFAULT, (ulong)CW_USEDEFAULT,
+	    0, 0, 0,
+	    STARTF_USESTDHANDLES,
+	    0, 0, 0,
+	    d->pipeStdin[0], d->pipeStdout[1], d->pipeStderr[1]
+	};
+	TCHAR *applicationName;
+	if ( appName.isNull() )
+	    applicationName = 0;
+	else
+	    applicationName = _wcsdup( (TCHAR*)appName.ucs2() );
+	TCHAR *commandLine = _wcsdup( (TCHAR*)args.ucs2() );
+	QByteArray envlist;
+	if ( env != 0 ) {
+	    int pos = 0;
+	    // add PATH if necessary (for DLL loading)
+	    QByteArray path = qgetenv( "PATH" );
+	    if ( env->grep( QRegExp(QLatin1String("^PATH="),FALSE) ).empty() && !path.isNull() ) {
+		QString tmp = QString( QLatin1String("PATH=%1") ).arg(QString::fromLatin1(path.constData()));
+		uint tmpSize = sizeof(TCHAR) * (tmp.length()+1);
+		envlist.resize( envlist.size() + tmpSize );
+		memcpy( envlist.data()+pos, tmp.ucs2(), tmpSize );
+		pos += tmpSize;
+	    }
+	    // add the user environment
+	    for ( QStringList::Iterator it = env->begin(); it != env->end(); it++ ) {
+		QString tmp = *it;
+		uint tmpSize = sizeof(TCHAR) * (tmp.length()+1);
+		envlist.resize( envlist.size() + tmpSize );
+		memcpy( envlist.data()+pos, tmp.ucs2(), tmpSize );
+		pos += tmpSize;
+	    }
+	    // add the 2 terminating 0 (actually 4, just to be on the safe side)
+	    envlist.resize( envlist.size()+4 );
+	    envlist[pos++] = 0;
+	    envlist[pos++] = 0;
+	    envlist[pos++] = 0;
+	    envlist[pos++] = 0;
+	}
+	success = CreateProcessW( applicationName, commandLine,
+		0, 0, TRUE, ( comms==0 ? CREATE_NEW_CONSOLE : CREATE_NO_WINDOW )
+#ifndef Q_OS_WINCE
+		| CREATE_UNICODE_ENVIRONMENT
+#endif
+		, env==0 ? 0 : envlist.data(),
+                (TCHAR*)QDir::toNativeSeparators(workingDir.absPath()).ucs2(),
+		&startupInfo, d->pid );
+	free( applicationName );
+	free( commandLine );
+    } else
+#endif // UNICODE
+    {
+#ifndef Q_OS_WINCE
+	STARTUPINFOA startupInfo = { sizeof( STARTUPINFOA ), 0, 0, 0,
+	    (ulong)CW_USEDEFAULT, (ulong)CW_USEDEFAULT, (ulong)CW_USEDEFAULT, (ulong)CW_USEDEFAULT,
+	    0, 0, 0,
+	    STARTF_USESTDHANDLES,
+	    0, 0, 0,
+	    d->pipeStdin[0], d->pipeStdout[1], d->pipeStderr[1]
+	};
+	QByteArray envlist;
+	if ( env != 0 ) {
+	    int pos = 0;
+	    // add PATH if necessary (for DLL loading)
+	    QByteArray path = qgetenv( "PATH" );
+	    if ( env->grep( QRegExp(QLatin1String("^PATH="),FALSE) ).empty() && !path.isNull() ) {
+		Q3CString tmp = QString( QLatin1String("PATH=%1") ).arg(QString::fromLatin1(path.constData())).local8Bit();
+		uint tmpSize = tmp.length() + 1;
+		envlist.resize( envlist.size() + tmpSize );
+		memcpy( envlist.data()+pos, tmp.data(), tmpSize );
+		pos += tmpSize;
+	    }
+	    // add the user environment
+	    for ( QStringList::Iterator it = env->begin(); it != env->end(); it++ ) {
+		Q3CString tmp = (*it).local8Bit();
+		uint tmpSize = tmp.length() + 1;
+		envlist.resize( envlist.size() + tmpSize );
+		memcpy( envlist.data()+pos, tmp.data(), tmpSize );
+		pos += tmpSize;
+	    }
+	    // add the terminating 0 (actually 2, just to be on the safe side)
+	    envlist.resize( envlist.size()+2 );
+	    envlist[pos++] = 0;
+	    envlist[pos++] = 0;
+	}
+	char *applicationName;
+	if ( appName.isNull() )
+	    applicationName = 0;
+	else
+	    applicationName = const_cast<char *>(appName.toLocal8Bit().data());
+	success = CreateProcessA( applicationName,
+		const_cast<char *>(args.toLocal8Bit().data()),
+		0, 0, TRUE, comms==0 ? CREATE_NEW_CONSOLE : DETACHED_PROCESS,
+		env==0 ? 0 : envlist.data(),
+                (const char*)QDir::toNativeSeparators(workingDir.absPath()).local8Bit(),
+		&startupInfo, d->pid );
+#endif // Q_OS_WINCE
+    }
+    if  ( !success ) {
+	d->deletePid();
+	return false;
+    }
+
+#ifndef Q_OS_WINCE
+    if ( comms & Stdin )
+	CloseHandle( d->pipeStdin[0] );
+    if ( comms & Stdout )
+        CloseHandle( d->pipeStdout[1] );
+    if ( (comms & Stderr) && !(comms & DupStderr) )
+	CloseHandle( d->pipeStderr[1] );
+#endif
+
+    if ( ioRedirection || notifyOnExit ) {
+	d->lookup->start( 100 );
+    }
+
+    // cleanup and return
+    return true;
+}
+
+static BOOL CALLBACK qt_terminateApp( HWND hwnd, LPARAM procId )
+{
+    DWORD procId_win;
+    GetWindowThreadProcessId( hwnd, &procId_win );
+    if( procId_win == (DWORD)procId )
+	PostMessage( hwnd, WM_CLOSE, 0, 0 );
+
+    return TRUE;
+}
+
+void Q3Process::tryTerminate() const
+{
+    if ( d->pid )
+	EnumWindows( qt_terminateApp, (LPARAM)d->pid->dwProcessId );
+}
+
+void Q3Process::kill() const
+{
+    if ( d->pid )
+	TerminateProcess( d->pid->hProcess, 0xf291 );
+}
+
+bool Q3Process::isRunning() const
+{
+    if ( !d->pid )
+	return false;
+
+    if ( WaitForSingleObject( d->pid->hProcess, 0) == WAIT_OBJECT_0 ) {
+	// there might be data to read
+	Q3Process *that = (Q3Process*)this;
+	that->socketRead( 1 ); // try stdout
+	that->socketRead( 2 ); // try stderr
+	// compute the exit values
+	if ( !d->exitValuesCalculated ) {
+	    DWORD exitCode;
+	    if ( GetExitCodeProcess( d->pid->hProcess, &exitCode ) ) {
+		if ( exitCode != STILL_ACTIVE ) { // this should ever be true?
+		    that->exitNormal = exitCode != 0xf291;
+		    that->exitStat = exitCode;
+		}
+	    }
+	    d->exitValuesCalculated = true;
+	}
+	d->deletePid();
+	d->closeHandles();
+	return false;
+    } else {
+        return true;
+    }
+}
+
+bool Q3Process::canReadLineStdout() const
+{
+    if( !d->pipeStdout[0] )
+	return d->bufStdout.size() != 0;
+
+    Q3Process *that = (Q3Process*)this;
+    return that->membufStdout()->scanNewline( 0 );
+}
+
+bool Q3Process::canReadLineStderr() const
+{
+    if( !d->pipeStderr[0] )
+	return d->bufStderr.size() != 0;
+
+    Q3Process *that = (Q3Process*)this;
+    return that->membufStderr()->scanNewline( 0 );
+}
+
+void Q3Process::writeToStdin( const QByteArray& buf )
+{
+    d->stdinBuf.enqueue( new QByteArray(buf) );
+    socketWrite( 0 );
+}
+
+void Q3Process::closeStdin( )
+{
+    if ( d->pipeStdin[1] != 0 ) {
+	CloseHandle( d->pipeStdin[1] );
+	d->pipeStdin[1] = 0;
+    }
+}
+
+void Q3Process::socketRead( int fd )
+{
+    // fd == 1: stdout, fd == 2: stderr
+    HANDLE dev;
+    if ( fd == 1 ) {
+	dev = d->pipeStdout[0];
+    } else if ( fd == 2 ) {
+	dev = d->pipeStderr[0];
+    } else {
+	return;
+    }
+#ifndef Q_OS_WINCE
+    // get the number of bytes that are waiting to be read
+    unsigned long i, r;
+    char dummy;
+    if ( !PeekNamedPipe( dev, &dummy, 1, &r, &i, 0 ) ) {
+	return; // ### is it worth to dig for the reason of the error?
+    }
+#else
+    unsigned long i = 1000;
+#endif
+    if ( i > 0 ) {
+	Q3Membuf *buffer;
+	if ( fd == 1 )
+	    buffer = &d->bufStdout;
+	else
+	    buffer = &d->bufStderr;
+
+	QByteArray *ba = new QByteArray( i );
+	uint sz = readStddev( dev, ba->data(), i );
+	if ( sz != i )
+	    ba->resize( i );
+
+	if ( sz == 0 ) {
+	    delete ba;
+	    return;
+	}
+	buffer->append( ba );
+	if ( fd == 1 )
+	    emit readyReadStdout();
+	else
+	    emit readyReadStderr();
+    }
+}
+
+void Q3Process::socketWrite( int )
+{
+    DWORD written;
+    while ( !d->stdinBuf.isEmpty() && isRunning() ) {
+	if ( !WriteFile( d->pipeStdin[1],
+		    d->stdinBuf.head()->data() + d->stdinBufRead,
+		    qMin( 8192, int(d->stdinBuf.head()->size() - d->stdinBufRead) ),
+		    &written, 0 ) ) {
+	    d->lookup->start( 100 );
+	    return;
+	}
+	d->stdinBufRead += written;
+	if ( d->stdinBufRead == (DWORD)d->stdinBuf.head()->size() ) {
+	    d->stdinBufRead = 0;
+	    delete d->stdinBuf.dequeue();
+	    if ( wroteToStdinConnected && d->stdinBuf.isEmpty() )
+		emit wroteToStdin();
+	}
+    }
+}
+
+void Q3Process::flushStdin()
+{
+    socketWrite( 0 );
+}
+
+/*
+  Use a timer for polling misc. stuff.
+*/
+void Q3Process::timeout()
+{
+    // Disable the timer temporary since one of the slots that are connected to
+    // the readyRead...(), etc. signals might trigger recursion if
+    // processEvents() is called.
+    d->lookup->stop();
+
+    // try to write pending data to stdin
+    if ( !d->stdinBuf.isEmpty() )
+	socketWrite( 0 );
+
+    if ( ioRedirection ) {
+	socketRead( 1 ); // try stdout
+	socketRead( 2 ); // try stderr
+    }
+
+    if ( isRunning() ) {
+	// enable timer again, if needed
+	if ( !d->stdinBuf.isEmpty() || ioRedirection || notifyOnExit )
+	    d->lookup->start( 100 );
+    } else if ( notifyOnExit ) {
+	emit processExited();
+    }
+}
+
+/*
+  read on the pipe
+*/
+uint Q3Process::readStddev( HANDLE dev, char *buf, uint bytes )
+{
+    if ( bytes > 0 ) {
+	ulong r;
+	if ( ReadFile( dev, buf, bytes, &r, 0 ) )
+	    return r;
+    }
+    return 0;
+}
+
+/*
+  Used by connectNotify() and disconnectNotify() to change the value of
+  ioRedirection (and related behaviour)
+*/
+void Q3Process::setIoRedirection( bool value )
+{
+    ioRedirection = value;
+    if ( !ioRedirection && !notifyOnExit )
+	d->lookup->stop();
+    if ( ioRedirection ) {
+	if ( isRunning() )
+	    d->lookup->start( 100 );
+    }
+}
+
+/*
+  Used by connectNotify() and disconnectNotify() to change the value of
+  notifyOnExit (and related behaviour)
+*/
+void Q3Process::setNotifyOnExit( bool value )
+{
+    notifyOnExit = value;
+    if ( !ioRedirection && !notifyOnExit )
+	d->lookup->stop();
+    if ( notifyOnExit ) {
+	if ( isRunning() )
+	    d->lookup->start( 100 );
+    }
+}
+
+/*
+  Used by connectNotify() and disconnectNotify() to change the value of
+  wroteToStdinConnected (and related behaviour)
+*/
+void Q3Process::setWroteStdinConnected( bool value )
+{
+    wroteToStdinConnected = value;
+}
+
+Q3Process::PID Q3Process::processIdentifier()
+{
+    return d->pid;
+}
+
+QT_END_NAMESPACE
+
+#endif // QT_NO_PROCESS
diff --git a/src/qt3support/other/qiconset.h b/src/qt3support/other/qiconset.h
new file mode 100644
index 0000000..5bfc902
--- /dev/null
+++ b/src/qt3support/other/qiconset.h
@@ -0,0 +1,48 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+#include <QtGui/qicon.h>
+
+QT_BEGIN_NAMESPACE
+
+QT_MODULE(Qt3Support)
+
+QT_END_NAMESPACE
diff --git a/src/qt3support/other/qt_compat_pch.h b/src/qt3support/other/qt_compat_pch.h
new file mode 100644
index 0000000..2b03003
--- /dev/null
+++ b/src/qt3support/other/qt_compat_pch.h
@@ -0,0 +1,66 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the Qt3Support module of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*
+ * This is a precompiled header file for use in Xcode / Mac GCC /
+ * GCC >= 3.4 / VC to greatly speed the building of Qt. It may also be
+ * of use to people developing their own project, but it is probably
+ * better to define your own header.  Use of this header is currently
+ * UNSUPPORTED.
+ */
+
+#if defined __cplusplus
+#include <qapplication.h>
+#include <qbitmap.h>
+#include <qcursor.h>
+#include <qdesktopwidget.h>
+#include <qevent.h>
+#include <qimage.h>
+#include <qlayout.h>
+#include <qpainter.h>
+#include <qpixmap.h>
+#include <qstring.h>
+#include <qstyle.h>
+#include <qtimer.h>
+#include <qwidget.h>
+
+#include <stdlib.h>
+#endif