Merge branch '4.7' of scm.dev.nokia.troll.no:qt/qt-qml into 4.7

31 files changed, 315 insertions, 243 deletions

diff --git a/src/declarative/QmlChanges.txt b/src/declarative/QmlChanges.txt
index 7218f78..dfc4244 100644
--- a/src/declarative/QmlChanges.txt
+++ b/src/declarative/QmlChanges.txt
@@ -4,6 +4,10 @@ The changes below are pre Qt 4.7.0 RC
 Flickable: overShoot is replaced by boundsBehavior enumeration.
 Component: isReady, isLoading, isError and isNull properties removed, use
     status property instead
+QList<QObject*> models no longer provide properties in model object.  The
+properties are now updated when the object changes.  An object's property
+"foo" may now be accessed as "foo", modelData.foo" or model.modelData.foo"
+
 
 C++ API
 -------
diff --git a/src/declarative/graphicsitems/qdeclarativeborderimage.cpp b/src/declarative/graphicsitems/qdeclarativeborderimage.cpp
index 14a2cab..018bd55 100644
--- a/src/declarative/graphicsitems/qdeclarativeborderimage.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeborderimage.cpp
@@ -102,10 +102,10 @@ QDeclarativeBorderImage::~QDeclarativeBorderImage()
 
     This property holds the status of image loading.  It can be one of:
     \list
-    \o Null - no image has been set
-    \o Ready - the image has been loaded
-    \o Loading - the image is currently being loaded
-    \o Error - an error occurred while loading the image
+    \o BorderImage.Null - no image has been set
+    \o BorderImage.Ready - the image has been loaded
+    \o BorderImage.Loading - the image is currently being loaded
+    \o BorderImage.Error - an error occurred while loading the image
     \endlist
 
     \sa progress
@@ -300,9 +300,9 @@ QDeclarativeScaleGrid *QDeclarativeBorderImage::border()
     This property describes how to repeat or stretch the middle parts of the border image.
 
     \list
-    \o Stretch - Scale the image to fit to the available area.
-    \o Repeat - Tile the image until there is no more space. May crop the last image.
-    \o Round - Like Repeat, but scales the images down to ensure that the last image is not cropped.
+    \o BorderImage.Stretch - Scale the image to fit to the available area.
+    \o BorderImage.Repeat - Tile the image until there is no more space. May crop the last image.
+    \o BorderImage.Round - Like Repeat, but scales the images down to ensure that the last image is not cropped.
     \endlist
 */
 QDeclarativeBorderImage::TileMode QDeclarativeBorderImage::horizontalTileMode() const
diff --git a/src/declarative/graphicsitems/qdeclarativeflickable.cpp b/src/declarative/graphicsitems/qdeclarativeflickable.cpp
index 35aa0f8..34b0606 100644
--- a/src/declarative/graphicsitems/qdeclarativeflickable.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeflickable.cpp
@@ -587,13 +587,13 @@ QDeclarativeFlickableVisibleArea *QDeclarativeFlickable::visibleArea()
     This property determines which directions the view can be flicked.
 
     \list
-    \o AutoFlickDirection (default) - allows flicking vertically if the
+    \o Flickable.AutoFlickDirection (default) - allows flicking vertically if the
     \e contentHeight is not equal to the \e height of the Flickable.
     Allows flicking horizontally if the \e contentWidth is not equal
     to the \e width of the Flickable.
-    \o HorizontalFlick - allows flicking horizontally.
-    \o VerticalFlick - allows flicking vertically.
-    \o HorizontalAndVerticalFlick - allows flicking in both directions.
+    \o Flickable.HorizontalFlick - allows flicking horizontally.
+    \o Flickable.VerticalFlick - allows flicking vertically.
+    \o Flickable.HorizontalAndVerticalFlick - allows flicking in both directions.
     \endlist
 */
 QDeclarativeFlickable::FlickDirection QDeclarativeFlickable::flickDirection() const
@@ -1031,11 +1031,11 @@ void QDeclarativeFlickable::setOverShoot(bool o)
     The \c boundsBehavior can be one of:
 
     \list
-    \o \e StopAtBounds - the contents can not be dragged beyond the boundary
+    \o \e Flickable.StopAtBounds - the contents can not be dragged beyond the boundary
     of the flickable, and flicks will not overshoot.
-    \o \e DragOverBounds - the contents can be dragged beyond the boundary
+    \o \e Flickable.DragOverBounds - the contents can be dragged beyond the boundary
     of the Flickable, but flicks will not overshoot.
-    \o \e DragAndOvershootBounds (default) - the contents can be dragged
+    \o \e Flickable.DragAndOvershootBounds (default) - the contents can be dragged
     beyond the boundary of the Flickable, and can overshoot the
     boundary when flicked.
     \endlist
@@ -1091,7 +1091,7 @@ void QDeclarativeFlickable::setContentWidth(qreal w)
     else
         d->viewport->setWidth(w);
     // Make sure that we're entirely in view.
-    if (!d->pressed) {
+    if (!d->pressed && !d->moving) {
         int oldDuration = d->fixupDuration;
         d->fixupDuration = 0;
         d->fixupX();
@@ -1118,7 +1118,7 @@ void QDeclarativeFlickable::setContentHeight(qreal h)
     else
         d->viewport->setHeight(h);
     // Make sure that we're entirely in view.
-    if (!d->pressed) {
+    if (!d->pressed && !d->moving) {
         int oldDuration = d->fixupDuration;
         d->fixupDuration = 0;
         d->fixupY();
diff --git a/src/declarative/graphicsitems/qdeclarativeflipable.cpp b/src/declarative/graphicsitems/qdeclarativeflipable.cpp
index 85f40c3..e2fc809 100644
--- a/src/declarative/graphicsitems/qdeclarativeflipable.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeflipable.cpp
@@ -167,7 +167,7 @@ void QDeclarativeFlipable::retransformBack()
   \qmlproperty enumeration Flipable::side
 
   The side of the Flippable currently visible. Possible values are \c
-  Front and \c Back.
+  Flippable.Front and \c Flippable.Back.
 */
 QDeclarativeFlipable::Side QDeclarativeFlipable::side() const
 {
diff --git a/src/declarative/graphicsitems/qdeclarativegridview.cpp b/src/declarative/graphicsitems/qdeclarativegridview.cpp
index 8fb3632..ef6d3df 100644
--- a/src/declarative/graphicsitems/qdeclarativegridview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativegridview.cpp
@@ -908,6 +908,9 @@ void QDeclarativeGridViewPrivate::flick(AxisData &data, qreal minExtent, qreal m
     In this case ListModel is a handy way for us to test our UI.  In practice
     the model would be implemented in C++, or perhaps via a SQL data source.
 
+    Delegates are instantiated as needed and may be destroyed at any time.
+    State should \e never be stored in a delegate.
+
     \bold Note that views do not enable \e clip automatically.  If the view
     is not clipped by another item or the screen, it will be necessary
     to set \e {clip: true} in order to have the out of view items clipped
@@ -961,7 +964,7 @@ QDeclarativeGridView::~QDeclarativeGridView()
             id: wrapper
             GridView.onRemove: SequentialAnimation {
                 PropertyAction { target: wrapper; property: "GridView.delayRemove"; value: true }
-                NumberAnimation { target: wrapper; property: "scale"; to: 0; duration: 250; easing.type: "InOutQuad" }
+                NumberAnimation { target: wrapper; property: "scale"; to: 0; duration: 250; easing.type: Easing.InOutQuad }
                 PropertyAction { target: wrapper; property: "GridView.delayRemove"; value: false }
             }
         }
@@ -1280,17 +1283,17 @@ void QDeclarativeGridView::setHighlightMoveDuration(int duration)
     highlight range. Furthermore, the behaviour of the current item index will occur
     whether or not a highlight exists.
 
-    If highlightRangeMode is set to \e ApplyRange the view will
+    If highlightRangeMode is set to \e GridView.ApplyRange the view will
     attempt to maintain the highlight within the range, however
     the highlight can move outside of the range at the ends of the list
     or due to a mouse interaction.
 
-    If highlightRangeMode is set to \e StrictlyEnforceRange the highlight will never
+    If highlightRangeMode is set to \e GridView.StrictlyEnforceRange the highlight will never
     move outside of the range.  This means that the current item will change
     if a keyboard or mouse action would cause the highlight to move
     outside of the range.
 
-    The default value is \e NoHighlightRange.
+    The default value is \e GridView.NoHighlightRange.
 
     Note that a valid range requires preferredHighlightEnd to be greater
     than or equal to preferredHighlightBegin.
@@ -1348,10 +1351,10 @@ void QDeclarativeGridView::setHighlightRangeMode(HighlightRangeMode mode)
   \qmlproperty enumeration GridView::flow
   This property holds the flow of the grid.
 
-  Possible values are \c LeftToRight (default) and \c TopToBottom.
+  Possible values are \c GridView.LeftToRight (default) and \c GridView.TopToBottom.
 
-  If \a flow is \c LeftToRight, the view will scroll vertically.
-  If \a flow is \c TopToBottom, the view will scroll horizontally.
+  If \a flow is \c GridView.LeftToRight, the view will scroll vertically.
+  If \a flow is \c GridView.TopToBottom, the view will scroll horizontally.
 */
 QDeclarativeGridView::Flow QDeclarativeGridView::flow() const
 {
@@ -1402,12 +1405,20 @@ void QDeclarativeGridView::setWrapEnabled(bool wrap)
 }
 
 /*!
-  \qmlproperty int GridView::cacheBuffer
-  This property holds the number of off-screen pixels to cache.
-
-  This property determines the number of pixels above the top of the view
-  and below the bottom of the view to cache.  Setting this value can make
-  scrolling the view smoother at the expense of additional memory usage.
+    \qmlproperty int GridView::cacheBuffer
+    This property determines whether delegates are retained outside the
+    visible area of the view.
+
+    If non-zero the view will keep as many delegates
+    instantiated as will fit within the buffer specified.  For example,
+    if in a vertical view the delegate is 20 pixels high and \c cacheBuffer is
+    set to 40, then up to 2 delegates above and 2 delegates below the visible
+    area may be retained.
+
+    Setting this value can make scrolling the list smoother at the expense
+    of additional memory usage.  It is not a substitute for creating efficient
+    delegates; the fewer elements in a delegate, the faster a view may be
+    scrolled.
 */
 int QDeclarativeGridView::cacheBuffer() const
 {
@@ -1474,10 +1485,10 @@ void QDeclarativeGridView::setCellHeight(int cellHeight)
     The allowed values are:
 
     \list
-    \o NoSnap (default) - the view will stop anywhere within the visible area.
-    \o SnapToRow - the view will settle with a row (or column for TopToBottom flow)
+    \o GridView.NoSnap (default) - the view will stop anywhere within the visible area.
+    \o GridView.SnapToRow - the view will settle with a row (or column for TopToBottom flow)
     aligned with the start of the view.
-    \o SnapOneRow - the view will settle no more than one row (or column for TopToBottom flow)
+    \o GridView.SnapOneRow - the view will settle no more than one row (or column for TopToBottom flow)
     away from the first visible row at the time the mouse button is released.
     This mode is particularly useful for moving one page at a time.
     \endlist
diff --git a/src/declarative/graphicsitems/qdeclarativeimage.cpp b/src/declarative/graphicsitems/qdeclarativeimage.cpp
index 1c32b45..aeddb15 100644
--- a/src/declarative/graphicsitems/qdeclarativeimage.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeimage.cpp
@@ -199,12 +199,12 @@ void QDeclarativeImagePrivate::setPixmap(const QPixmap &pixmap)
     than the size of the item.
 
     \list
-    \o Stretch - the image is scaled to fit
-    \o PreserveAspectFit - the image is scaled uniformly to fit without cropping
-    \o PreserveAspectCrop - the image is scaled uniformly to fill, cropping if necessary
-    \o Tile - the image is duplicated horizontally and vertically
-    \o TileVertically - the image is stretched horizontally and tiled vertically
-    \o TileHorizontally - the image is stretched vertically and tiled horizontally
+    \o Image.Stretch - the image is scaled to fit
+    \o Image.PreserveAspectFit - the image is scaled uniformly to fit without cropping
+    \o Image.PreserveAspectCrop - the image is scaled uniformly to fill, cropping if necessary
+    \o Image.Tile - the image is duplicated horizontally and vertically
+    \o Image.TileVertically - the image is stretched horizontally and tiled vertically
+    \o Image.TileHorizontally - the image is stretched vertically and tiled horizontally
     \endlist
 
     \image declarative-image_fillMode.gif
@@ -243,10 +243,10 @@ qreal QDeclarativeImage::paintedHeight() const
 
     This property holds the status of image loading.  It can be one of:
     \list
-    \o Null - no image has been set
-    \o Ready - the image has been loaded
-    \o Loading - the image is currently being loaded
-    \o Error - an error occurred while loading the image
+    \o Image.Null - no image has been set
+    \o Image.Ready - the image has been loaded
+    \o Image.Loading - the image is currently being loaded
+    \o Image.Error - an error occurred while loading the image
     \endlist
 
     Note that a change in the status property does not cause anything to happen
diff --git a/src/declarative/graphicsitems/qdeclarativeitem.cpp b/src/declarative/graphicsitems/qdeclarativeitem.cpp
index 14f6b4a..0395766 100644
--- a/src/declarative/graphicsitems/qdeclarativeitem.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeitem.cpp
@@ -1432,7 +1432,7 @@ QDeclarativeItem::~QDeclarativeItem()
     }
     \endqml
 
-    The default transform origin is \c Center.
+    The default transform origin is \c Item.Center.
 */
 
 /*!
@@ -1632,10 +1632,6 @@ void QDeclarativeItemPrivate::parentProperty(QObject *o, void *rv, QDeclarativeN
     specify it.
  */
 
-/*!
-    \internal
-*/
-
 /*! \internal */
 QDeclarativeListProperty<QObject> QDeclarativeItemPrivate::data()
 {
@@ -1646,7 +1642,7 @@ QDeclarativeListProperty<QObject> QDeclarativeItemPrivate::data()
     \property QDeclarativeItem::childrenRect
     \brief The geometry of an item's children.
 
-    childrenRect provides an easy way to access the (collective) position and size of the item's children.
+    This property holds the (collective) position and size of the item's children.
 */
 QRectF QDeclarativeItem::childrenRect()
 {
@@ -2966,7 +2962,6 @@ void QDeclarativeItem::setFocus(bool focus)
 }
 
 /*!
-    \reimp
     \internal
 */
 void QDeclarativeItem::paint(QPainter *, const QStyleOptionGraphicsItem *, QWidget *)
@@ -2974,7 +2969,6 @@ void QDeclarativeItem::paint(QPainter *, const QStyleOptionGraphicsItem *, QWidg
 }
 
 /*!
-    \reimp
     \internal
 */
 bool QDeclarativeItem::event(QEvent *ev)
diff --git a/src/declarative/graphicsitems/qdeclarativelistview.cpp b/src/declarative/graphicsitems/qdeclarativelistview.cpp
index 0f3ee61..8485071 100644
--- a/src/declarative/graphicsitems/qdeclarativelistview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativelistview.cpp
@@ -1164,6 +1164,7 @@ void QDeclarativeListViewPrivate::flick(AxisData &data, qreal minExtent, qreal m
 
     moveReason = Mouse;
     if ((!haveHighlightRange || highlightRange != QDeclarativeListView::StrictlyEnforceRange) && snapMode == QDeclarativeListView::NoSnap) {
+        correctFlick = true;
         QDeclarativeFlickablePrivate::flick(data, minExtent, maxExtent, vSize, fixupCallback, velocity);
         return;
     }
@@ -1313,6 +1314,9 @@ void QDeclarativeListViewPrivate::flick(AxisData &data, qreal minExtent, qreal m
     In this case ListModel is a handy way for us to test our UI.  In practice
     the model would be implemented in C++, or perhaps via a SQL data source.
 
+    Delegates are instantiated as needed and may be destroyed at any time.
+    State should \e never be stored in a delegate.
+
     \bold Note that views do not enable \e clip automatically.  If the view
     is not clipped by another item or the screen, it will be necessary
     to set \e {clip: true} in order to have the out of view items clipped
@@ -1391,7 +1395,7 @@ QDeclarativeListView::~QDeclarativeListView()
             id: wrapper
             ListView.onRemove: SequentialAnimation {
                 PropertyAction { target: wrapper; property: "ListView.delayRemove"; value: true }
-                NumberAnimation { target: wrapper; property: "scale"; to: 0; duration: 250; easing.type: "InOutQuad" }
+                NumberAnimation { target: wrapper; property: "scale"; to: 0; duration: 250; easing.type: Easing.InOutQuad }
                 PropertyAction { target: wrapper; property: "ListView.delayRemove"; value: false }
             }
         }
@@ -1690,17 +1694,17 @@ void QDeclarativeListView::setHighlightFollowsCurrentItem(bool autoHighlight)
     highlight range. Furthermore, the behaviour of the current item index will occur
     whether or not a highlight exists.
 
-    If highlightRangeMode is set to \e ApplyRange the view will
+    If highlightRangeMode is set to \e ListView.ApplyRange the view will
     attempt to maintain the highlight within the range, however
     the highlight can move outside of the range at the ends of the list
     or due to a mouse interaction.
 
-    If highlightRangeMode is set to \e StrictlyEnforceRange the highlight will never
+    If highlightRangeMode is set to \e ListView.StrictlyEnforceRange the highlight will never
     move outside of the range.  This means that the current item will change
     if a keyboard or mouse action would cause the highlight to move
     outside of the range.
 
-    The default value is \e NoHighlightRange.
+    The default value is \e ListView.NoHighlightRange.
 
     Note that a valid range requires preferredHighlightEnd to be greater
     than or equal to preferredHighlightBegin.
@@ -1780,9 +1784,9 @@ void QDeclarativeListView::setSpacing(qreal spacing)
 
     Possible values are \c Vertical (default) and \c Horizontal.
 
-    Vertical Example:
+    ListView.Vertical Example:
     \image trivialListView.png
-    Horizontal Example:
+    ListView.Horizontal Example:
     \image ListViewHorizontal.png
 */
 QDeclarativeListView::Orientation QDeclarativeListView::orientation() const
@@ -1835,11 +1839,19 @@ void QDeclarativeListView::setWrapEnabled(bool wrap)
 
 /*!
     \qmlproperty int ListView::cacheBuffer
-    This property holds the number of off-screen pixels to cache.
-
-    This property determines the number of pixels above the top of the list
-    and below the bottom of the list to cache.  Setting this value can make
-    scrolling the list smoother at the expense of additional memory usage.
+    This property determines whether delegates are retained outside the
+    visible area of the view.
+
+    If non-zero the view will keep as many delegates
+    instantiated as will fit within the buffer specified.  For example,
+    if in a vertical view the delegate is 20 pixels high and \c cacheBuffer is
+    set to 40, then up to 2 delegates above and 2 delegates below the visible
+    area may be retained.
+
+    Setting this value can make scrolling the list smoother at the expense
+    of additional memory usage.  It is not a substitute for creating efficient
+    delegates; the fewer elements in a delegate, the faster a view may be
+    scrolled.
 */
 int QDeclarativeListView::cacheBuffer() const
 {
@@ -1996,17 +2008,17 @@ void QDeclarativeListView::setHighlightResizeDuration(int duration)
     The allowed values are:
 
     \list
-    \o NoSnap (default) - the view will stop anywhere within the visible area.
-    \o SnapToItem - the view will settle with an item aligned with the start of
+    \o ListView.NoSnap (default) - the view will stop anywhere within the visible area.
+    \o ListView.SnapToItem - the view will settle with an item aligned with the start of
     the view.
-    \o SnapOneItem - the view will settle no more than one item away from the first
+    \o ListView.SnapOneItem - the view will settle no more than one item away from the first
     visible item at the time the mouse button is released.  This mode is particularly
     useful for moving one page at a time.
     \endlist
 
     snapMode does not affect the currentIndex.  To update the
     currentIndex as the list is moved set \e highlightRangeMode
-    to \e StrictlyEnforceRange.
+    to \e ListView.StrictlyEnforceRange.
 
     \sa highlightRangeMode
 */
diff --git a/src/declarative/graphicsitems/qdeclarativeloader.cpp b/src/declarative/graphicsitems/qdeclarativeloader.cpp
index 62fa4db..7edd53c 100644
--- a/src/declarative/graphicsitems/qdeclarativeloader.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeloader.cpp
@@ -329,10 +329,10 @@ void QDeclarativeLoaderPrivate::_q_sourceLoaded()
 
     This property holds the status of QML loading.  It can be one of:
     \list
-    \o Null - no QML source has been set
-    \o Ready - the QML source has been loaded
-    \o Loading - the QML source is currently being loaded
-    \o Error - an error occurred while loading the QML source
+    \o Loader.Null - no QML source has been set
+    \o Loader.Ready - the QML source has been loaded
+    \o Loader.Loading - the QML source is currently being loaded
+    \o Loader.Error - an error occurred while loading the QML source
     \endlist
 
     Note that a change in the status property does not cause anything to happen
diff --git a/src/declarative/graphicsitems/qdeclarativepainteditem.cpp b/src/declarative/graphicsitems/qdeclarativepainteditem.cpp
index 5dd7e5d..6430fae 100644
--- a/src/declarative/graphicsitems/qdeclarativepainteditem.cpp
+++ b/src/declarative/graphicsitems/qdeclarativepainteditem.cpp
@@ -231,7 +231,7 @@ void QDeclarativePaintedItem::setCacheFrozen(bool frozen)
 }
 
 /*!
-    \reimp
+    \internal
 */
 void QDeclarativePaintedItem::paint(QPainter *p, const QStyleOptionGraphicsItem *, QWidget *)
 {
diff --git a/src/declarative/graphicsitems/qdeclarativepathview.cpp b/src/declarative/graphicsitems/qdeclarativepathview.cpp
index 7cb723c..5c3a3c0 100644
--- a/src/declarative/graphicsitems/qdeclarativepathview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativepathview.cpp
@@ -308,12 +308,16 @@ void QDeclarativePathViewPrivate::regenerate()
 
     The model is typically provided by a QAbstractListModel "C++ model object", but can also be created directly in QML.
 
-    The items are laid out along a path defined by a \l Path and may be flicked to scroll.
+    The \l delegate is instantiated for each item on the \l path.
+    The items may be flicked to move them along the path.
 
     \snippet doc/src/snippets/declarative/pathview/pathview.qml 0
 
     \image pathview.gif
 
+    Delegates are instantiated as needed and may be destroyed at any time.
+    State should \e never be stored in a delegate.
+
     \bold Note that views do not enable \e clip automatically.  If the view
     is not clipped by another item or the screen, it will be necessary
     to set \e {clip: true} in order to have the out of view items clipped
@@ -618,12 +622,12 @@ QDeclarativeItem *QDeclarativePathView::highlightItem()
     These properties set the preferred range of the highlight (current item)
     within the view.  The preferred values must be in the range 0.0-1.0.
 
-    If highlightRangeMode is set to \e ApplyRange the view will
+    If highlightRangeMode is set to \e PathView.ApplyRange the view will
     attempt to maintain the highlight within the range, however
     the highlight can move outside of the range at the ends of the path
     or due to a mouse interaction.
 
-    If highlightRangeMode is set to \e StrictlyEnforceRange the highlight will never
+    If highlightRangeMode is set to \e PathView.StrictlyEnforceRange the highlight will never
     move outside of the range.  This means that the current item will change
     if a keyboard or mouse action would cause the highlight to move
     outside of the range.
@@ -631,14 +635,14 @@ QDeclarativeItem *QDeclarativePathView::highlightItem()
     Note that this is the correct way to influence where the
     current item ends up when the view moves. For example, if you want the
     currently selected item to be in the middle of the path, then set the
-    highlight range to be 0.5,0.5 and highlightRangeMode to StrictlyEnforceRange.
+    highlight range to be 0.5,0.5 and highlightRangeMode to PathView.StrictlyEnforceRange.
     Then, when the path scrolls,
     the currently selected item will be the item at that position. This also applies to
     when the currently selected item changes - it will scroll to within the preferred
     highlight range. Furthermore, the behaviour of the current item index will occur
     whether or not a highlight exists.
 
-    The default value is \e StrictlyEnforceRange.
+    The default value is \e PathView.StrictlyEnforceRange.
 
     Note that a valid range requires preferredHighlightEnd to be greater
     than or equal to preferredHighlightBegin.
diff --git a/src/declarative/graphicsitems/qdeclarativepositioners.cpp b/src/declarative/graphicsitems/qdeclarativepositioners.cpp
index 7e4549f..93bff3e 100644
--- a/src/declarative/graphicsitems/qdeclarativepositioners.cpp
+++ b/src/declarative/graphicsitems/qdeclarativepositioners.cpp
@@ -377,7 +377,7 @@ Column {
     move: Transition {
         NumberAnimation {
             properties: "y"
-            easing.type: "OutBounce"
+            easing.type: Easing.OutBounce
         }
     }
 }
@@ -738,14 +738,14 @@ void QDeclarativeGrid::setRows(const int rows)
 }
 
 /*!
-    \qmlproperty enumeration Flow::flow
+    \qmlproperty enumeration Grid::flow
     This property holds the flow of the layout.
 
-    Possible values are \c LeftToRight (default) and \c TopToBottom.
+    Possible values are \c Grid.LeftToRight (default) and \c Grid.TopToBottom.
 
-    If \a flow is \c LeftToRight, the items are positioned next to
+    If \a flow is \c Grid.LeftToRight, the items are positioned next to
     to each other from left to right, then wrapped to the next line.
-    If \a flow is \c TopToBottom, the items are positioned next to each
+    If \a flow is \c Grid.TopToBottom, the items are positioned next to each
     other from top to bottom, then wrapped to the next column.
 */
 QDeclarativeGrid::Flow QDeclarativeGrid::flow() const
@@ -952,12 +952,12 @@ QDeclarativeFlow::QDeclarativeFlow(QDeclarativeItem *parent)
     \qmlproperty enumeration Flow::flow
     This property holds the flow of the layout.
 
-    Possible values are \c LeftToRight (default) and \c TopToBottom.
+    Possible values are \c Flow.LeftToRight (default) and \c Flow.TopToBottom.
 
-    If \a flow is \c LeftToRight, the items are positioned next to
+    If \a flow is \c Flow.LeftToRight, the items are positioned next to
     to each other from left to right until the width of the Flow
     is exceeded, then wrapped to the next line.
-    If \a flow is \c TopToBottom, the items are positioned next to each
+    If \a flow is \c Flow.TopToBottom, the items are positioned next to each
     other from top to bottom until the height of the Flow is exceeded,
     then wrapped to the next column.
 */
diff --git a/src/declarative/graphicsitems/qdeclarativetext.cpp b/src/declarative/graphicsitems/qdeclarativetext.cpp
index eeff0c3..4e7e0fd 100644
--- a/src/declarative/graphicsitems/qdeclarativetext.cpp
+++ b/src/declarative/graphicsitems/qdeclarativetext.cpp
@@ -200,11 +200,11 @@ QDeclarativeTextPrivate::~QDeclarativeTextPrivate()
 
     The weight can be one of:
     \list
-    \o Light
-    \o Normal - the default
-    \o DemiBold
-    \o Bold
-    \o Black
+    \o Font.Light
+    \o Font.Normal - the default
+    \o Font.DemiBold
+    \o Font.Bold
+    \o Font.Black
     \endlist
 
     \qml
@@ -277,11 +277,11 @@ QDeclarativeTextPrivate::~QDeclarativeTextPrivate()
     Sets the capitalization for the text.
 
     \list
-    \o MixedCase - This is the normal text rendering option where no capitalization change is applied.
-    \o AllUppercase - This alters the text to be rendered in all uppercase type.
-    \o AllLowercase	 - This alters the text to be rendered in all lowercase type.
-    \o SmallCaps -	This alters the text to be rendered in small-caps type.
-    \o Capitalize - This alters the text to be rendered with the first character of each word as an uppercase character.
+    \o Font.MixedCase - This is the normal text rendering option where no capitalization change is applied.
+    \o Font.AllUppercase - This alters the text to be rendered in all uppercase type.
+    \o Font.AllLowercase	 - This alters the text to be rendered in all lowercase type.
+    \o Font.SmallCaps -	This alters the text to be rendered in small-caps type.
+    \o Font.Capitalize - This alters the text to be rendered with the first character of each word as an uppercase character.
     \endlist
 
     \qml
@@ -380,10 +380,10 @@ QColor QDeclarativeText::color() const
 
     Supported text styles are:
     \list
-    \o Normal - the default
-    \o Outline
-    \o Raised
-    \o Sunken
+    \o Text.Normal - the default
+    \o Text.Outline
+    \o Text.Raised
+    \o Text.Sunken
     \endlist
 
     \qml
@@ -451,9 +451,14 @@ QColor QDeclarativeText::styleColor() const
     Sets the horizontal and vertical alignment of the text within the Text items
     width and height.  By default, the text is top-left aligned.
 
-    The valid values for \c horizontalAlignment are \c AlignLeft, \c AlignRight and
-    \c AlignHCenter.  The valid values for \c verticalAlignment are \c AlignTop, \c AlignBottom
-    and \c AlignVCenter.
+    The valid values for \c horizontalAlignment are \c Text.AlignLeft, \c Text.AlignRight and
+    \c Text.AlignHCenter.  The valid values for \c verticalAlignment are \c Text.AlignTop, \c Text.AlignBottom
+    and \c Text.AlignVCenter.
+
+    Note that for a single line of text, the size of the text is the area of the text. In this common case,
+    all alignments are equivalent. If you want the text to be, say, centered in it parent, then you will
+    need to either modify the Item::anchors, or set horizontalAlignment to Text.AlignHCenter and bind the width to 
+    that of the parent.
 */
 QDeclarativeText::HAlignment QDeclarativeText::hAlign() const
 {
@@ -494,16 +499,16 @@ void QDeclarativeText::setVAlign(VAlignment align)
     wrap if an explicit width has been set.  wrapMode can be one of:
 
     \list
-    \o NoWrap - no wrapping will be performed.
-    \o WordWrap - wrapping is done on word boundaries. If the text cannot be
+    \o Text.NoWrap - no wrapping will be performed.
+    \o Text.WordWrap - wrapping is done on word boundaries. If the text cannot be
     word-wrapped to the specified width it will be partially drawn outside of the item's bounds.
     If this is undesirable then enable clipping on the item (Item::clip).
-    \o WrapAnywhere - Text can be wrapped at any point on a line, even if it occurs in the middle of a word.
-    \o WrapAtWordBoundaryOrAnywhere - If possible, wrapping occurs at a word boundary; otherwise it
+    \o Text.WrapAnywhere - Text can be wrapped at any point on a line, even if it occurs in the middle of a word.
+    \o Text.WrapAtWordBoundaryOrAnywhere - If possible, wrapping occurs at a word boundary; otherwise it
        will occur at the appropriate point on the line, even in the middle of a word.
     \endlist
 
-    The default is NoWrap.
+    The default is Text.NoWrap.
 */
 QDeclarativeText::WrapMode QDeclarativeText::wrapMode() const
 {
@@ -533,17 +538,17 @@ void QDeclarativeText::setWrapMode(WrapMode mode)
     Supported text formats are:
     
     \list
-    \o AutoText
-    \o PlainText
-    \o RichText
-    \o StyledText
+    \o Text.AutoText
+    \o Text.PlainText
+    \o Text.RichText
+    \o Text.StyledText
     \endlist
 
-    The default is AutoText.  If the text format is AutoText the text element
+    The default is Text.AutoText.  If the text format is Text.AutoText the text element
     will automatically determine whether the text should be treated as
     rich text.  This determination is made using Qt::mightBeRichText().
 
-    StyledText is an optimized format supporting some basic text
+    Text.StyledText is an optimized format supporting some basic text
     styling markup, in the style of html 3.2:
 
     \code
@@ -554,7 +559,7 @@ void QDeclarativeText::setWrapMode(WrapMode mode)
     &gt; &lt; &amp;
     \endcode
 
-    \c StyledText parser is strict, requiring tags to be correctly nested.
+    \c Text.StyledText parser is strict, requiring tags to be correctly nested.
 
     \table
     \row
@@ -622,13 +627,13 @@ void QDeclarativeText::setTextFormat(TextFormat format)
 
     Eliding can be:
     \list
-    \o ElideNone  - the default
-    \o ElideLeft
-    \o ElideMiddle
-    \o ElideRight
+    \o Text.ElideNone  - the default
+    \o Text.ElideLeft
+    \o Text.ElideMiddle
+    \o Text.ElideRight
     \endlist
 
-    If the text is a multi-length string, and the mode is not \c ElideNone,
+    If the text is a multi-length string, and the mode is not \c Text.ElideNone,
     the first string that fits will be used, otherwise the last will be elided.
 
     Multi-length strings are ordered from longest to shortest, separated by the
diff --git a/src/declarative/graphicsitems/qdeclarativetextedit.cpp b/src/declarative/graphicsitems/qdeclarativetextedit.cpp
index 762640c..d0ee2ee 100644
--- a/src/declarative/graphicsitems/qdeclarativetextedit.cpp
+++ b/src/declarative/graphicsitems/qdeclarativetextedit.cpp
@@ -138,11 +138,11 @@ QString QDeclarativeTextEdit::text() const
 
     The weight can be one of:
     \list
-    \o Light
-    \o Normal - the default
-    \o DemiBold
-    \o Bold
-    \o Black
+    \o Font.Light
+    \o Font.Normal - the default
+    \o Font.DemiBold
+    \o Font.Bold
+    \o Font.Black
     \endlist
 
     \qml
@@ -215,11 +215,11 @@ QString QDeclarativeTextEdit::text() const
     Sets the capitalization for the text.
 
     \list
-    \o MixedCase - This is the normal text rendering option where no capitalization change is applied.
-    \o AllUppercase - This alters the text to be rendered in all uppercase type.
-    \o AllLowercase	 - This alters the text to be rendered in all lowercase type.
-    \o SmallCaps -	This alters the text to be rendered in small-caps type.
-    \o Capitalize - This alters the text to be rendered with the first character of each word as an uppercase character.
+    \o Font.MixedCase - This is the normal text rendering option where no capitalization change is applied.
+    \o Font.AllUppercase - This alters the text to be rendered in all uppercase type.
+    \o Font.AllLowercase	 - This alters the text to be rendered in all lowercase type.
+    \o Font.SmallCaps -	This alters the text to be rendered in small-caps type.
+    \o Font.Capitalize - This alters the text to be rendered with the first character of each word as an uppercase character.
     \endlist
 
     \qml
@@ -255,13 +255,13 @@ void QDeclarativeTextEdit::setText(const QString &text)
     The way the text property should be displayed.
 
     \list
-    \o AutoText
-    \o PlainText
-    \o RichText
-    \o StyledText
+    \o TextEdit.AutoText
+    \o TextEdit.PlainText
+    \o TextEdit.RichText
+    \o TextEdit.StyledText
     \endlist
 
-    The default is AutoText.  If the text format is AutoText the text edit
+    The default is TextEdit.AutoText.  If the text format is TextEdit.AutoText the text edit
     will automatically determine whether the text should be treated as
     rich text.  This determination is made using Qt::mightBeRichText().
 
@@ -428,9 +428,9 @@ void QDeclarativeTextEdit::setSelectedTextColor(const QColor &color)
     Sets the horizontal and vertical alignment of the text within the TextEdit items
     width and height.  By default, the text is top-left aligned.
 
-    The valid values for \c horizontalAlignment are \c AlignLeft, \c AlignRight and
-    \c AlignHCenter.  The valid values for \c verticalAlignment are \c AlignTop, \c AlignBottom
-    and \c AlignVCenter.
+    The valid values for \c horizontalAlignment are \c TextEdit.AlignLeft, \c TextEdit.AlignRight and
+    \c TextEdit.AlignHCenter.  The valid values for \c verticalAlignment are \c TextEdit.AlignTop, \c TextEdit.AlignBottom
+    and \c TextEdit.AlignVCenter.
 */
 QDeclarativeTextEdit::HAlignment QDeclarativeTextEdit::hAlign() const
 {
@@ -473,14 +473,14 @@ void QDeclarativeTextEdit::setVAlign(QDeclarativeTextEdit::VAlignment alignment)
     The text will only wrap if an explicit width has been set.
 
     \list
-    \o NoWrap - no wrapping will be performed.
-    \o WordWrap - wrapping is done on word boundaries.
-    \o WrapAnywhere - Text can be wrapped at any point on a line, even if it occurs in the middle of a word.
-    \o WrapAtWordBoundaryOrAnywhere - If possible, wrapping occurs at a word boundary; otherwise it
+    \o TextEdit.NoWrap - no wrapping will be performed.
+    \o TextEdit.WordWrap - wrapping is done on word boundaries.
+    \o TextEdit.WrapAnywhere - Text can be wrapped at any point on a line, even if it occurs in the middle of a word.
+    \o TextEdit.WrapAtWordBoundaryOrAnywhere - If possible, wrapping occurs at a word boundary; otherwise it
        will occur at the appropriate point on the line, even in the middle of a word.
     \endlist
 
-    The default is NoWrap.
+    The default is TextEdit.NoWrap.
 */
 QDeclarativeTextEdit::WrapMode QDeclarativeTextEdit::wrapMode() const
 {
diff --git a/src/declarative/graphicsitems/qdeclarativetextinput.cpp b/src/declarative/graphicsitems/qdeclarativetextinput.cpp
index 775450a..a1fa8c6 100644
--- a/src/declarative/graphicsitems/qdeclarativetextinput.cpp
+++ b/src/declarative/graphicsitems/qdeclarativetextinput.cpp
@@ -118,11 +118,11 @@ void QDeclarativeTextInput::setText(const QString &s)
 
     The weight can be one of:
     \list
-    \o Light
-    \o Normal - the default
-    \o DemiBold
-    \o Bold
-    \o Black
+    \o Font.Light
+    \o Font.Normal - the default
+    \o Font.DemiBold
+    \o Font.Bold
+    \o Font.Black
     \endlist
 
     \qml
@@ -195,11 +195,11 @@ void QDeclarativeTextInput::setText(const QString &s)
     Sets the capitalization for the text.
 
     \list
-    \o MixedCase - This is the normal text rendering option where no capitalization change is applied.
-    \o AllUppercase - This alters the text to be rendered in all uppercase type.
-    \o AllLowercase	 - This alters the text to be rendered in all lowercase type.
-    \o SmallCaps -	This alters the text to be rendered in small-caps type.
-    \o Capitalize - This alters the text to be rendered with the first character of each word as an uppercase character.
+    \o Font.MixedCase - This is the normal text rendering option where no capitalization change is applied.
+    \o Font.AllUppercase - This alters the text to be rendered in all uppercase type.
+    \o Font.AllLowercase	 - This alters the text to be rendered in all lowercase type.
+    \o Font.SmallCaps -	This alters the text to be rendered in small-caps type.
+    \o Font.Capitalize - This alters the text to be rendered with the first character of each word as an uppercase character.
     \endlist
 
     \qml
@@ -308,8 +308,8 @@ void QDeclarativeTextInput::setSelectedTextColor(const QColor &color)
     vertically. You can use anchors to align it however you want within
     another item.
 
-    The valid values for \c horizontalAlignment are \c AlignLeft, \c AlignRight and
-    \c AlignHCenter.
+    The valid values for \c horizontalAlignment are \c TextInput.AlignLeft, \c TextInput.AlignRight and
+    \c TextInput.AlignHCenter.
 */
 QDeclarativeTextInput::HAlignment QDeclarativeTextInput::hAlign() const
 {
@@ -600,9 +600,9 @@ void QDeclarativeTextInput::setAutoScroll(bool b)
     This property holds the notation of how a string can describe a number.
 
     The values for this property are DoubleValidator.StandardNotation or DoubleValidator.ScientificNotation.
-    If this property is set to ScientificNotation, the written number may have an exponent part(i.e. 1.5E-2).
+    If this property is set to DoubleValidator.ScientificNotation, the written number may have an exponent part(i.e. 1.5E-2).
 
-    By default, this property is set to ScientificNotation.
+    By default, this property is set to DoubleValidator.ScientificNotation.
 */
 
 /*!
@@ -828,7 +828,7 @@ void QDeclarativeTextInput::moveCursor()
 }
 
 /*!
-    \qmlmethod int xToPosition(int x)
+    \qmlmethod int TextInput::xToPosition(int x)
 
     This function returns the character position at
     x pixels from the left of the textInput. Position 0 is before the
@@ -1097,7 +1097,7 @@ QString QDeclarativeTextInput::displayText() const
 }
 
 /*!
-    \qmlmethod void moveCursorSelection(int position)
+    \qmlmethod void TextInput::moveCursorSelection(int position)
 
     Moves the cursor to \a position and updates the selection accordingly.
     (To only move the cursor, set the \l cursorPosition property.)
diff --git a/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp b/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp
index 2addc77..f01d4c2 100644
--- a/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp
+++ b/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp
@@ -437,8 +437,7 @@ int QDeclarativeVisualDataModelDataMetaObject::createProperty(const char *name,
     if ((!model->m_listModelInterface || !model->m_abstractItemModel) && model->m_listAccessor) {
         if (model->m_listAccessor->type() == QDeclarativeListAccessor::ListProperty) {
             model->ensureRoles();
-            QObject *object = model->m_listAccessor->at(data->m_index).value<QObject*>();
-            if (object && (object->property(name).isValid() || qstrcmp(name,"modelData")==0))
+            if (qstrcmp(name,"modelData") == 0)
                 return QDeclarativeOpenMetaObject::createProperty(name, type);
         }
     }
@@ -1029,6 +1028,11 @@ QDeclarativeItem *QDeclarativeVisualDataModel::item(int index, const QByteArray
         if (!ccontext) ccontext = qmlContext(this);
         QDeclarativeContext *ctxt = new QDeclarativeContext(ccontext);
         QDeclarativeVisualDataModelData *data = new QDeclarativeVisualDataModelData(index, this);
+        if ((!d->m_listModelInterface || !d->m_abstractItemModel) && d->m_listAccessor
+            && d->m_listAccessor->type() == QDeclarativeListAccessor::ListProperty) {
+            ctxt->setContextObject(d->m_listAccessor->at(index).value<QObject*>());
+            ctxt = new QDeclarativeContext(ctxt, ctxt);
+        }
         ctxt->setContextProperty(QLatin1String("model"), data);
         ctxt->setContextObject(data);
         d->m_completePending = false;
diff --git a/src/declarative/qml/qdeclarativecomponent.cpp b/src/declarative/qml/qdeclarativecomponent.cpp
index 3ca0707..fb799dc 100644
--- a/src/declarative/qml/qdeclarativecomponent.cpp
+++ b/src/declarative/qml/qdeclarativecomponent.cpp
@@ -241,10 +241,10 @@ QDeclarativeComponent::~QDeclarativeComponent()
     \qmlproperty enumeration Component::status
     This property holds the status of component loading.  It can be one of:
     \list
-    \o Null - no data is available for the component
-    \o Ready - the component has been loaded, and can be used to create instances.
-    \o Loading - the component is currently being loaded
-    \o Error - an error occurred while loading the component.
+    \o Component.Null - no data is available for the component
+    \o Component.Ready - the component has been loaded, and can be used to create instances.
+    \o Component.Loading - the component is currently being loaded
+    \o Component.Error - an error occurred while loading the component.
                Calling errorsString() will provide a human-readable description of any errors.
     \endlist
  */
diff --git a/src/declarative/qml/qdeclarativeengine.cpp b/src/declarative/qml/qdeclarativeengine.cpp
index d31e3d5..6ddd01e 100644
--- a/src/declarative/qml/qdeclarativeengine.cpp
+++ b/src/declarative/qml/qdeclarativeengine.cpp
@@ -1553,7 +1553,7 @@ QStringList QDeclarativeEngine::importPathList() const
 }
 
 /*!
-  Sets the list of directories where the engine searches for
+  Sets \a paths as the list of directories where the engine searches for
   installed modules in a URL-based directory structure.
 
   By default, the list contains the paths specified in the \c QML_IMPORT_PATH environment
diff --git a/src/declarative/qml/qdeclarativeobjectscriptclass.cpp b/src/declarative/qml/qdeclarativeobjectscriptclass.cpp
index 03366f0..8b64e0e 100644
--- a/src/declarative/qml/qdeclarativeobjectscriptclass.cpp
+++ b/src/declarative/qml/qdeclarativeobjectscriptclass.cpp
@@ -104,7 +104,8 @@ QScriptValue QDeclarativeObjectScriptClass::newQObject(QObject *object, int type
     QScriptEngine *scriptEngine = QDeclarativeEnginePrivate::getScriptEngine(engine);
 
     if (!object)
-        return newObject(scriptEngine, this, new ObjectData(object, type));
+        return scriptEngine->nullValue();
+//        return newObject(scriptEngine, this, new ObjectData(object, type));
 
     if (QObjectPrivate::get(object)->wasDeleted)
        return scriptEngine->undefinedValue();
@@ -775,7 +776,8 @@ QScriptDeclarativeClass::Value MetaCallArgument::toValue(QDeclarativeEngine *e)
         return QScriptDeclarativeClass::Value(engine, *((QString *)&data));
     } else if (type == QMetaType::QObjectStar) {
         QObject *object = *((QObject **)&data);
-        QDeclarativeData::get(object, true)->setImplicitDestructible();
+        if (object)
+            QDeclarativeData::get(object, true)->setImplicitDestructible();
         QDeclarativeEnginePrivate *priv = QDeclarativeEnginePrivate::get(e);
         return QScriptDeclarativeClass::Value(engine, priv->objectClass->newQObject(object));
     } else if (type == qMetaTypeId<QList<QObject *> >()) {
diff --git a/src/declarative/qml/qdeclarativepropertyvaluesource.cpp b/src/declarative/qml/qdeclarativepropertyvaluesource.cpp
index a0ed78f..039998f 100644
--- a/src/declarative/qml/qdeclarativepropertyvaluesource.cpp
+++ b/src/declarative/qml/qdeclarativepropertyvaluesource.cpp
@@ -60,6 +60,9 @@ QDeclarativePropertyValueSource::QDeclarativePropertyValueSource()
 {
 }
 
+/*!
+    Destroys the value source.
+*/
 QDeclarativePropertyValueSource::~QDeclarativePropertyValueSource()
 {
 }
diff --git a/src/declarative/util/qdeclarativeanimation.cpp b/src/declarative/util/qdeclarativeanimation.cpp
index 4059522..206621b 100644
--- a/src/declarative/util/qdeclarativeanimation.cpp
+++ b/src/declarative/util/qdeclarativeanimation.cpp
@@ -55,6 +55,7 @@
 #include <qdeclarativemetatype_p.h>
 #include <qdeclarativevaluetype_p.h>
 #include <qdeclarativeproperty_p.h>
+#include <qdeclarativeengine_p.h>
 
 #include <qvariant.h>
 #include <qcolor.h>
@@ -178,6 +179,10 @@ void QDeclarativeAbstractAnimation::setRunning(bool r)
         d->running = r;
         if (r == false)
             d->avoidPropertyValueSourceStart = true;
+        else {
+            QDeclarativeEnginePrivate *engPriv = QDeclarativeEnginePrivate::get(qmlEngine(this));
+            engPriv->registerFinalizedParserStatusObject(this, this->metaObject()->indexOfSlot("componentFinalized()"));
+        }
         return;
     }
 
@@ -268,6 +273,11 @@ void QDeclarativeAbstractAnimation::componentComplete()
 {
     Q_D(QDeclarativeAbstractAnimation);
     d->componentComplete = true;
+}
+
+void QDeclarativeAbstractAnimation::componentFinalized()
+{
+    Q_D(QDeclarativeAbstractAnimation);
     if (d->running) {
         d->running = false;
         setRunning(true);
@@ -864,7 +874,7 @@ void QDeclarativePropertyActionPrivate::init()
     This property holds an explicit target object to animate.
 
     The exact effect of the \c target property depends on how the animation
-    is being used.  Refer to the \l animation documentation for details.
+    is being used.  Refer to the \l {QML Animation} documentation for details.
 */
 
 QObject *QDeclarativePropertyAction::target() const
@@ -1320,27 +1330,27 @@ void QDeclarativeRotationAnimation::setTo(qreal t)
 /*!
     \qmlproperty enumeration RotationAnimation::direction
     The direction in which to rotate.
-    Possible values are Numerical, Clockwise, Counterclockwise,
-    or Shortest.
+
+    Possible values are:
 
     \table
     \row
-        \o Numerical
+        \o RotationAnimation.Numerical
         \o Rotate by linearly interpolating between the two numbers.
            A rotation from 10 to 350 will rotate 340 degrees clockwise.
     \row
-        \o Clockwise
+        \o RotationAnimation.Clockwise
         \o Rotate clockwise between the two values
     \row
-        \o Counterclockwise
+        \o RotationAnimation.Counterclockwise
         \o Rotate counterclockwise between the two values
     \row
-        \o Shortest
+        \o RotationAnimation.Shortest
         \o Rotate in the direction that produces the shortest animation path.
            A rotation from 10 to 350 will rotate 20 degrees counterclockwise.
     \endtable
 
-    The default direction is Numerical.
+    The default direction is RotationAnimation.Numerical.
 */
 QDeclarativeRotationAnimation::RotationDirection QDeclarativeRotationAnimation::direction() const
 {
@@ -1605,7 +1615,7 @@ void QDeclarativePropertyAnimationPrivate::convertVariant(QVariant &variant, int
     Animate any objects that have changed their x or y properties in the target state using
     an InOutQuad easing curve:
     \qml
-    Transition { PropertyAnimation { properties: "x,y"; easing.type: "InOutQuad" } }
+    Transition { PropertyAnimation { properties: "x,y"; easing.type: Easing.InOutQuad } }
     \endqml
     \o In a Behavior
 
@@ -1754,189 +1764,189 @@ void QDeclarativePropertyAnimation::setTo(const QVariant &t)
     Linear.
 
     \qml
-    PropertyAnimation { properties: "y"; easing.type: "InOutElastic"; easing.amplitude: 2.0; easing.period: 1.5 }
+    PropertyAnimation { properties: "y"; easing.type: Easing.InOutElastic; easing.amplitude: 2.0; easing.period: 1.5 }
     \endqml
 
     Available types are:
 
     \table
     \row
-        \o \c Linear
+        \o \c Easing.Linear
         \o Easing curve for a linear (t) function: velocity is constant.
         \o \inlineimage qeasingcurve-linear.png
     \row
-        \o \c InQuad
+        \o \c Easing.InQuad
         \o Easing curve for a quadratic (t^2) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-inquad.png
     \row
-        \o \c OutQuad
+        \o \c Easing.OutQuad
         \o Easing curve for a quadratic (t^2) function: decelerating to zero velocity.
         \o \inlineimage qeasingcurve-outquad.png
     \row
-        \o \c InOutQuad
+        \o \c Easing.InOutQuad
         \o Easing curve for a quadratic (t^2) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutquad.png
     \row
-        \o \c OutInQuad
+        \o \c Easing.OutInQuad
         \o Easing curve for a quadratic (t^2) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinquad.png
     \row
-        \o \c InCubic
+        \o \c Easing.InCubic
         \o Easing curve for a cubic (t^3) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-incubic.png
     \row
-        \o \c OutCubic
+        \o \c Easing.OutCubic
         \o Easing curve for a cubic (t^3) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outcubic.png
     \row
-        \o \c InOutCubic
+        \o \c Easing.InOutCubic
         \o Easing curve for a cubic (t^3) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutcubic.png
     \row
-        \o \c OutInCubic
+        \o \c Easing.OutInCubic
         \o Easing curve for a cubic (t^3) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outincubic.png
     \row
-        \o \c InQuart
+        \o \c Easing.InQuart
         \o Easing curve for a quartic (t^4) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-inquart.png
     \row
-        \o \c OutQuart
+        \o \c Easing.OutQuart
         \o Easing curve for a cubic (t^4) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outquart.png
     \row
-        \o \c InOutQuart
+        \o \c Easing.InOutQuart
         \o Easing curve for a cubic (t^4) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutquart.png
     \row
-        \o \c OutInQuart
+        \o \c Easing.OutInQuart
         \o Easing curve for a cubic (t^4) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinquart.png
     \row
-        \o \c InQuint
+        \o \c Easing.InQuint
         \o Easing curve for a quintic (t^5) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-inquint.png
     \row
-        \o \c OutQuint
+        \o \c Easing.OutQuint
         \o Easing curve for a cubic (t^5) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outquint.png
     \row
-        \o \c InOutQuint
+        \o \c Easing.InOutQuint
         \o Easing curve for a cubic (t^5) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutquint.png
     \row
-        \o \c OutInQuint
+        \o \c Easing.OutInQuint
         \o Easing curve for a cubic (t^5) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinquint.png
     \row
-        \o \c InSine
+        \o \c Easing.InSine
         \o Easing curve for a sinusoidal (sin(t)) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-insine.png
     \row
-        \o \c OutSine
+        \o \c Easing.OutSine
         \o Easing curve for a sinusoidal (sin(t)) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outsine.png
     \row
-        \o \c InOutSine
+        \o \c Easing.InOutSine
         \o Easing curve for a sinusoidal (sin(t)) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutsine.png
     \row
-        \o \c OutInSine
+        \o \c Easing.OutInSine
         \o Easing curve for a sinusoidal (sin(t)) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinsine.png
     \row
-        \o \c InExpo
+        \o \c Easing.InExpo
         \o Easing curve for an exponential (2^t) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-inexpo.png
     \row
-        \o \c OutExpo
+        \o \c Easing.OutExpo
         \o Easing curve for an exponential (2^t) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outexpo.png
     \row
-        \o \c InOutExpo
+        \o \c Easing.InOutExpo
         \o Easing curve for an exponential (2^t) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutexpo.png
     \row
-        \o \c OutInExpo
+        \o \c Easing.OutInExpo
         \o Easing curve for an exponential (2^t) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinexpo.png
     \row
-        \o \c InCirc
+        \o \c Easing.InCirc
         \o Easing curve for a circular (sqrt(1-t^2)) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-incirc.png
     \row
-        \o \c OutCirc
+        \o \c Easing.OutCirc
         \o Easing curve for a circular (sqrt(1-t^2)) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outcirc.png
     \row
-        \o \c InOutCirc
+        \o \c Easing.InOutCirc
         \o Easing curve for a circular (sqrt(1-t^2)) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutcirc.png
     \row
-        \o \c OutInCirc
+        \o \c Easing.OutInCirc
         \o Easing curve for a circular (sqrt(1-t^2)) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outincirc.png
     \row
-        \o \c InElastic
+        \o \c Easing.InElastic
         \o Easing curve for an elastic (exponentially decaying sine wave) function: accelerating from zero velocity.
         \br The peak amplitude can be set with the \e amplitude parameter, and the period of decay by the \e period parameter.
         \o \inlineimage qeasingcurve-inelastic.png
     \row
-        \o \c OutElastic
+        \o \c Easing.OutElastic
         \o Easing curve for an elastic (exponentially decaying sine wave) function: decelerating from zero velocity.
         \br The peak amplitude can be set with the \e amplitude parameter, and the period of decay by the \e period parameter.
         \o \inlineimage qeasingcurve-outelastic.png
     \row
-        \o \c InOutElastic
+        \o \c Easing.InOutElastic
         \o Easing curve for an elastic (exponentially decaying sine wave) function: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutelastic.png
     \row
-        \o \c OutInElastic
+        \o \c Easing.OutInElastic
         \o Easing curve for an elastic (exponentially decaying sine wave) function: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinelastic.png
     \row
-        \o \c InBack
+        \o \c Easing.InBack
         \o Easing curve for a back (overshooting cubic function: (s+1)*t^3 - s*t^2) easing in: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-inback.png
     \row
-        \o \c OutBack
+        \o \c Easing.OutBack
         \o Easing curve for a back (overshooting cubic function: (s+1)*t^3 - s*t^2) easing out: decelerating to zero velocity.
         \o \inlineimage qeasingcurve-outback.png
     \row
-        \o \c InOutBack
+        \o \c Easing.InOutBack
         \o Easing curve for a back (overshooting cubic function: (s+1)*t^3 - s*t^2) easing in/out: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutback.png
     \row
-        \o \c OutInBack
+        \o \c Easing.OutInBack
         \o Easing curve for a back (overshooting cubic easing: (s+1)*t^3 - s*t^2) easing out/in: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinback.png
     \row
-        \o \c InBounce
+        \o \c Easing.InBounce
         \o Easing curve for a bounce (exponentially decaying parabolic bounce) function: accelerating from zero velocity.
         \o \inlineimage qeasingcurve-inbounce.png
     \row
-        \o \c OutBounce
+        \o \c Easing.OutBounce
         \o Easing curve for a bounce (exponentially decaying parabolic bounce) function: decelerating from zero velocity.
         \o \inlineimage qeasingcurve-outbounce.png
     \row
-        \o \c InOutBounce
+        \o \c Easing.InOutBounce
         \o Easing curve for a bounce (exponentially decaying parabolic bounce) function easing in/out: acceleration until halfway, then deceleration.
         \o \inlineimage qeasingcurve-inoutbounce.png
     \row
-        \o \c OutInBounce
+        \o \c Easing.OutInBounce
         \o Easing curve for a bounce (exponentially decaying parabolic bounce) function easing out/in: deceleration until halfway, then acceleration.
         \o \inlineimage qeasingcurve-outinbounce.png
     \endtable
 
-    easing.amplitude is not applicable for all curve types. It is only applicable for bounce and elastic curves (curves of type
-    QEasingCurve::InBounce, QEasingCurve::OutBounce, QEasingCurve::InOutBounce, QEasingCurve::OutInBounce, QEasingCurve::InElastic,
-    QEasingCurve::OutElastic, QEasingCurve::InOutElastic or QEasingCurve::OutInElastic).
+    easing.amplitude is only applicable for bounce and elastic curves (curves of type
+    Easing.InBounce, Easing.OutBounce, Easing.InOutBounce, Easing.OutInBounce, Easing.InElastic,
+    Easing.OutElastic, Easing.InOutElastic or Easing.OutInElastic).
 
-    easing.overshoot is not applicable for all curve types. It is only applicable if type is: QEasingCurve::InBack, QEasingCurve::OutBack,
-    QEasingCurve::InOutBack or QEasingCurve::OutInBack.
+    easing.overshoot is only applicable if type is: Easing.InBack, Easing.OutBack,
+    Easing.InOutBack or Easing.OutInBack.
 
-    easing.period is not applicable for all curve types. It is only applicable if type is: QEasingCurve::InElastic, QEasingCurve::OutElastic,
-    QEasingCurve::InOutElastic or QEasingCurve::OutInElastic.
+    easing.period is only applicable if type is: Easing.InElastic, Easing.OutElastic,
+    Easing.InOutElastic or Easing.OutInElastic.
 */
 QEasingCurve QDeclarativePropertyAnimation::easing() const
 {
@@ -2730,7 +2740,7 @@ void QDeclarativeAnchorAnimation::setDuration(int duration)
     Linear.
 
     \qml
-    AnchorAnimation { easing.type: "InOutQuad" }
+    AnchorAnimation { easing.type: Easing.InOutQuad }
     \endqml
 
     See the \l{PropertyAnimation::easing.type} documentation for information
diff --git a/src/declarative/util/qdeclarativeanimation_p.h b/src/declarative/util/qdeclarativeanimation_p.h
index 40c893c..e7cd8a8 100644
--- a/src/declarative/util/qdeclarativeanimation_p.h
+++ b/src/declarative/util/qdeclarativeanimation_p.h
@@ -133,6 +133,7 @@ public:
 
 private Q_SLOTS:
     void timelineComplete();
+    void componentFinalized();
 
 private:
     virtual void setTarget(const QDeclarativeProperty &);
diff --git a/src/declarative/util/qdeclarativebehavior.cpp b/src/declarative/util/qdeclarativebehavior.cpp
index 90344ab..ba90007 100644
--- a/src/declarative/util/qdeclarativebehavior.cpp
+++ b/src/declarative/util/qdeclarativebehavior.cpp
@@ -82,7 +82,7 @@ public:
         y: 200  // initial value
         Behavior on y {
             NumberAnimation {
-                easing.type: "OutBounce"
+                easing.type: Easing.OutBounce
                 easing.amplitude: 100
                 duration: 200
             }
diff --git a/src/declarative/util/qdeclarativefontloader.cpp b/src/declarative/util/qdeclarativefontloader.cpp
index f98ce8b..adfcd62 100644
--- a/src/declarative/util/qdeclarativefontloader.cpp
+++ b/src/declarative/util/qdeclarativefontloader.cpp
@@ -185,10 +185,10 @@ void QDeclarativeFontLoader::setName(const QString &name)
 
     This property holds the status of font loading.  It can be one of:
     \list
-    \o Null - no font has been set
-    \o Ready - the font has been loaded
-    \o Loading - the font is currently being loaded
-    \o Error - an error occurred while loading the font
+    \o FontLoader.Null - no font has been set
+    \o FontLoader.Ready - the font has been loaded
+    \o FontLoader.Loading - the font is currently being loaded
+    \o FontLoader.Error - an error occurred while loading the font
     \endlist
 
     Note that a change in the status property does not cause anything to happen
diff --git a/src/declarative/util/qdeclarativesmoothedanimation.cpp b/src/declarative/util/qdeclarativesmoothedanimation.cpp
index 19a00ee..bd48ef0 100644
--- a/src/declarative/util/qdeclarativesmoothedanimation.cpp
+++ b/src/declarative/util/qdeclarativesmoothedanimation.cpp
@@ -388,10 +388,10 @@ void QDeclarativeSmoothedAnimation::transition(QDeclarativeStateActions &actions
 
     Sets how the SmoothedAnimation behaves if an animation direction is reversed.
 
-    If reversing mode is \c Eased, the animation will smoothly decelerate, and
-    then reverse direction.  If the reversing mode is \c Immediate, the
+    If reversing mode is \c SmoothedAnimation.Eased, the animation will smoothly decelerate, and
+    then reverse direction.  If the reversing mode is \c SmoothedAnimation.Immediate, the
     animation will immediately begin accelerating in the reverse direction,
-    begining with a velocity of 0.  If the reversing mode is \c Sync, the
+    begining with a velocity of 0.  If the reversing mode is \c SmoothedAnimation.Sync, the
     property is immediately set to the target value.
 */
 QDeclarativeSmoothedAnimation::ReversingMode QDeclarativeSmoothedAnimation::reversingMode() const
diff --git a/src/declarative/util/qdeclarativesmoothedfollow.cpp b/src/declarative/util/qdeclarativesmoothedfollow.cpp
index 3ed9257..f70df9d 100644
--- a/src/declarative/util/qdeclarativesmoothedfollow.cpp
+++ b/src/declarative/util/qdeclarativesmoothedfollow.cpp
@@ -143,10 +143,10 @@ QDeclarativeSmoothedFollowPrivate::QDeclarativeSmoothedFollowPrivate()
 
     Sets how the SmoothedFollow behaves if an animation direction is reversed.
 
-    If reversing mode is \c Eased, the animation will smoothly decelerate, and
-    then reverse direction.  If the reversing mode is \c Immediate, the
+    If reversing mode is \c SmoothedFollow.Eased, the animation will smoothly decelerate, and
+    then reverse direction.  If the reversing mode is \c SmoothedFollow.Immediate, the
     animation will immediately begin accelerating in the reverse direction,
-    begining with a velocity of 0.  If the reversing mode is \c Sync, the
+    begining with a velocity of 0.  If the reversing mode is \c SmoothedFollow.Sync, the
     property is immediately set to the target value.
 */
 QDeclarativeSmoothedFollow::ReversingMode QDeclarativeSmoothedFollow::reversingMode() const
diff --git a/src/declarative/util/qdeclarativespringfollow.cpp b/src/declarative/util/qdeclarativespringfollow.cpp
index 70077f3..aae66ac 100644
--- a/src/declarative/util/qdeclarativespringfollow.cpp
+++ b/src/declarative/util/qdeclarativespringfollow.cpp
@@ -227,7 +227,7 @@ void QDeclarativeSpringFollowPrivate::stop()
             loops: Animation.Infinite
             NumberAnimation {
                 to: 200
-                easing.type: "OutBounce"
+                easing.type: Easing.OutBounce
                 easing.amplitude: 100
                 duration: 2000
             }
diff --git a/src/declarative/util/qdeclarativestategroup.cpp b/src/declarative/util/qdeclarativestategroup.cpp
index 5b51495..9b042d7 100644
--- a/src/declarative/util/qdeclarativestategroup.cpp
+++ b/src/declarative/util/qdeclarativestategroup.cpp
@@ -47,6 +47,7 @@
 #include <qdeclarativebinding_p.h>
 #include <qdeclarativeglobal_p.h>
 
+#include <QtCore/qstringbuilder.h>
 #include <QtCore/qdebug.h>
 
 #include <private/qobject_p.h>
@@ -62,7 +63,7 @@ class QDeclarativeStateGroupPrivate : public QObjectPrivate
 public:
     QDeclarativeStateGroupPrivate()
     : nullState(0), componentComplete(true),
-      ignoreTrans(false), applyingState(false) {}
+      ignoreTrans(false), applyingState(false), unnamedCount(0) {}
 
     QString currentState;
     QDeclarativeState *nullState;
@@ -78,6 +79,7 @@ public:
     bool componentComplete;
     bool ignoreTrans;
     bool applyingState;
+    int unnamedCount;
 
     QDeclarativeTransition *findTransition(const QString &from, const QString &to);
     void setCurrentStateInternal(const QString &state, bool = false);
@@ -259,6 +261,12 @@ void QDeclarativeStateGroup::componentComplete()
     Q_D(QDeclarativeStateGroup);
     d->componentComplete = true;
 
+    for (int ii = 0; ii < d->states.count(); ++ii) {
+        QDeclarativeState *state = d->states.at(ii);
+        if (state->name().isEmpty())
+            state->setName(QLatin1String("anonymousState") % QString::number(++d->unnamedCount));
+    }
+
     if (d->updateAutoState()) {
         return;
     } else if (!d->currentState.isEmpty()) {
diff --git a/src/declarative/util/qdeclarativexmllistmodel.cpp b/src/declarative/util/qdeclarativexmllistmodel.cpp
index bdebadf..ae3b5d7 100644
--- a/src/declarative/util/qdeclarativexmllistmodel.cpp
+++ b/src/declarative/util/qdeclarativexmllistmodel.cpp
@@ -675,10 +675,10 @@ void QDeclarativeXmlListModel::setNamespaceDeclarations(const QString &declarati
     Specifies the model loading status, which can be one of the following:
 
     \list
-    \o Null - No XML data has been set for this model.
-    \o Ready - The XML data has been loaded into the model.
-    \o Loading - The model is in the process of reading and loading XML data.
-    \o Error - An error occurred while the model was loading.
+    \o XmlListModel.Null - No XML data has been set for this model.
+    \o XmlListModel.Ready - The XML data has been loaded into the model.
+    \o XmlListModel.Loading - The model is in the process of reading and loading XML data.
+    \o XmlListModel.Error - An error occurred while the model was loading.
     \endlist
 
     \sa progress
diff --git a/src/gui/painting/qdrawutil.cpp b/src/gui/painting/qdrawutil.cpp
index a62f06b..ef9b18c 100644
--- a/src/gui/painting/qdrawutil.cpp
+++ b/src/gui/painting/qdrawutil.cpp
@@ -1137,6 +1137,15 @@ void qDrawBorderPixmap(QPainter *painter, const QRect &targetRect, const QMargin
     xTarget.resize(columns + 1);
     yTarget.resize(rows + 1);
 
+    bool oldAA = painter->testRenderHint(QPainter::Antialiasing);
+    bool oldSmooth = painter->testRenderHint(QPainter::SmoothPixmapTransform);
+    if (painter->paintEngine()->type() != QPaintEngine::OpenGL
+        && painter->paintEngine()->type() != QPaintEngine::OpenGL2
+        && (oldSmooth || oldAA) && painter->combinedTransform().type() != QTransform::TxNone) {
+        painter->setRenderHint(QPainter::Antialiasing, false);
+        painter->setRenderHint(QPainter::SmoothPixmapTransform, false);
+    }
+
     xTarget[0] = targetRect.left();
     xTarget[1] = targetCenterLeft;
     xTarget[columns - 1] = targetCenterRight;
@@ -1342,6 +1351,11 @@ void qDrawBorderPixmap(QPainter *painter, const QRect &targetRect, const QMargin
         painter->drawPixmapFragments(opaqueData.data(), opaqueData.size(), pixmap, QPainter::OpaqueHint);
     if (translucentData.size())
         painter->drawPixmapFragments(translucentData.data(), translucentData.size(), pixmap);
+
+    if (oldAA)
+        painter->setRenderHint(QPainter::Antialiasing, true);
+    if (oldSmooth)
+        painter->setRenderHint(QPainter::SmoothPixmapTransform, true);
 }
 
 QT_END_NAMESPACE
diff --git a/src/imports/gestures/qdeclarativegesturearea.cpp b/src/imports/gestures/qdeclarativegesturearea.cpp
index 615c674..19afe0c 100644
--- a/src/imports/gestures/qdeclarativegesturearea.cpp
+++ b/src/imports/gestures/qdeclarativegesturearea.cpp
@@ -259,7 +259,7 @@ bool QDeclarativeGestureAreaPrivate::gestureEvent(QGestureEvent *event)
     bool accept = true;
     for (Bindings::Iterator it = bindings.begin(); it != bindings.end(); ++it) {
         if ((gesture = event->gesture(it.key()))) {
-            it.value()->value();
+            it.value()->evaluate();
             event->setAccepted(true); // XXX only if value returns true?
         }
     }