Merge branch '4.7' of scm.dev.nokia.troll.no:qt/qt-qml into 4.7

28 files changed, 701 insertions, 432 deletions

diff --git a/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp b/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp
index 2d74d4b..94f08bd 100644
--- a/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp
+++ b/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp
@@ -145,46 +145,76 @@ void GraphicsWebView::mouseMoveEvent(QGraphicsSceneMouseEvent* event)
     \qmlclass WebView QDeclarativeWebView
     \ingroup qml-view-elements
     \since 4.7
-    \brief The WebView item allows you to add web content to a canvas.
+    \brief The WebView item allows you to add Web content to a canvas.
     \inherits Item
 
-    A WebView renders web content based on a URL.
+    A WebView renders Web content based on a URL.
 
     This type is made available by importing the \c QtWebKit module:
 
     \bold{import QtWebKit 1.0}
 
-    If the width and height of the item is not set, they will
-    dynamically adjust to a size appropriate for the content.
-    This width may be large for typical online web pages.
+    The WebView item includes no scrolling, scaling, toolbars, or other common browser
+    components. These must be implemented around WebView. See the \l{QML Web Browser}
+    example for a demonstration of this.
 
-    If the width or height is explictly set, the rendered website
-    will be clipped, not scaled, to fit into the set dimensions.
+    The page to be displayed by the item is specified using the \l url property,
+    and this can be changed to fetch and display a new page. While the page loads,
+    the \l progress property is updated to indicate how much of the page has been
+    loaded.
 
-    If the preferredWidth is set, the width will be this amount or larger,
-    usually laying out the web content to fit the preferredWidth.
+    \section1 Appearance
 
-    \qml
-    import QtWebKit 1.0
+    If the width and height of the item is not set, they will dynamically adjust
+    to a size appropriate for the content. This width may be large for typical
+    online web pages, typically greater than 800 by 600 pixels.
 
-    WebView {
-        url: "http://www.nokia.com"
-        preferredWidth: 490
-        preferredHeight: 400
-        scale: 0.5
-        smooth: false
-        smoothCache: true
-    }
-    \endqml
+    If the \l{Item::}{width} or \l{Item::}{height} is explictly set, the rendered Web site will be
+    clipped, not scaled, to fit into the set dimensions.
 
-    \image webview.png
+    If the preferredWidth property is set, the width will be this amount or larger,
+    usually laying out the Web content to fit the preferredWidth.
 
-    The item includes no scrolling, scaling,
-    toolbars, etc., those must be implemented around WebView. See the WebBrowser example
-    for a demonstration of this.
+    The appearance of the content can be controlled to a certain extent by changing
+    the settings.standardFontFamily property and other settings related to fonts.
+
+    The page can be zoomed by calling the heuristicZoom() method, which performs a
+    series of tests to determine whether zoomed content will be displayed in an
+    appropriate way in the space allocated to the item.
+
+    \section1 User Interaction and Navigation
+
+    By default, certain mouse and touch events are delivered to other items in
+    preference to the Web content. For example, when a scrolling view is created
+    by placing a WebView in a Flickable, move events are delivered to the Flickable
+    so that the user can scroll the page. This prevents the user from accidentally
+    selecting text in a Web page instead of scrolling.
+
+    The pressGrabTime property defines the time the user must touch or press a
+    mouse button over the WebView before the Web content will receive the move
+    events it needs to select text and images.
+
+    When this item has keyboard focus, all keyboard input will be sent directly to
+    the Web page within.
+
+    When the navigates by clicking on links, the item records the pages visited
+    in its internal history
+
+    Because this item is designed to be used as a component in a browser, it
+    exposes \l{Action}{actions} for \l back, \l forward, \l reload and \l stop.
+    These can be triggered to change the current page displayed by the item.
+
+    \section1 Example Usage
+
+    \beginfloatright
+    \inlineimage webview.png
+    \endfloat
+
+    The following example displays a scaled down Web page at a fixed size.
+
+    \snippet doc/src/snippets/declarative/webview/webview.qml document
 
-    When this item has keyboard focus, all keyboard input will be sent directly to the
-    web page within.
+    \clearfloat
 
     \sa {declarative/modelviews/webview}{WebView example}, {demos/declarative/webbrowser}{Web Browser demo}
 */
@@ -393,7 +423,7 @@ void QDeclarativeWebView::setPreferredHeight(int height)
 }
 
 /*!
-    \qmlmethod bool WebView::evaluateJavaScript(string)
+    \qmlmethod bool WebView::evaluateJavaScript(string scriptSource)
 
     Evaluates the \a scriptSource JavaScript inside the context of the
     main web frame, and returns the result of the last executed statement.
@@ -517,14 +547,14 @@ void QDeclarativeWebView::setRenderingEnabled(bool enabled)
 }
 
 /*!
-    \qmlsignal WebView::onDoubleClick(clickx, clicky)
+    \qmlsignal WebView::onDoubleClick(int clickx, int clicky)
 
     The WebView does not pass double-click events to the web engine, but rather
     emits this signals.
 */
 
 /*!
-    \qmlmethod bool WebView::heuristicZoom(clickX,clickY,maxzoom)
+    \qmlmethod bool WebView::heuristicZoom(int clickX, int clickY, real maxzoom)
 
     Finds a zoom that:
     \list
@@ -559,11 +589,11 @@ bool QDeclarativeWebView::heuristicZoom(int clickX, int clickY, qreal maxZoom)
     \qmlproperty int WebView::pressGrabTime
 
     The number of milliseconds the user must press before the WebView
-    starts passing move events through to the web engine (rather than
+    starts passing move events through to the Web engine (rather than
     letting other QML elements such as a Flickable take them).
 
     Defaults to 400ms. Set to 0 to always grab and pass move events to
-    the web engine.
+    the Web engine.
 */
 int QDeclarativeWebView::pressGrabTime() const
 {
@@ -980,7 +1010,7 @@ QString QDeclarativeWebPage::chooseFile(QWebFrame* originatingFrame, const QStri
 }
 
 /*!
-    \qmlsignal WebView::onAlert(message)
+    \qmlsignal WebView::onAlert(string message)
 
     The handler is called when the web engine sends a JavaScript alert. The \a message is the text
     to be displayed in the alert to the user.
diff --git a/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp b/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp
index a95e944..12a820f 100644
--- a/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp
@@ -58,35 +58,32 @@ QT_BEGIN_NAMESPACE
     \inherits Image
     \since 4.7
     \ingroup basic-visual-elements
-    
-    The AnimatedImage element provides for playing animations stored as images containing a series of frames,
-    such as GIF files. 
-    
+
+    The AnimatedImage element extends the features of the \l Image element, providing
+    a way to play animations stored as images containing a series of frames,
+    such as those stored in GIF files.
+
+    Information about the current frame and totla length of the animation can be
+    obtained using the \l currentFrame and \l frameCount properties. You can
+    start, pause and stop the animation by changing the values of the \l playing
+    and \l paused properties.
+
     The full list of supported formats can be determined with QMovie::supportedFormats().
 
-    \table
-    \row
-    \o \image animatedimageitem.gif
-    \o
-    \qml
-    import Qt 4.7
+    \section1 Example Usage
 
-    Rectangle {
-        width: animation.width; height: animation.height + 8
+    \beginfloatleft
+    \image animatedimageitem.gif
+    \endfloat
 
-        AnimatedImage { id: animation; source: "animation.gif" }
+    The following QML shows how to display an animated image and obtain information
+    about its state, such as the current frame and total number of frames.
+    The result is an animated image with a simple progress indicator underneath it.
 
-        Rectangle { 
-            property int frames: animation.frameCount
+    \clearfloat
+    \snippet doc/src/snippets/declarative/animatedimage.qml document
 
-            width: 4; height: 8
-            x: (animation.width - width) * animation.currentFrame / frames
-            y: animation.height
-            color: "red"
-        }
-    }
-    \endqml
-    \endtable
+    \sa BorderImage, Image
 */
 
 QDeclarativeAnimatedImage::QDeclarativeAnimatedImage(QDeclarativeItem *parent)
@@ -104,7 +101,8 @@ QDeclarativeAnimatedImage::~QDeclarativeAnimatedImage()
   \qmlproperty bool AnimatedImage::paused
   This property holds whether the animated image is paused.
 
-  Defaults to false, and can be set to true when you want to pause.
+  By default, this property is false. Set it to true when you want to pause
+  the animation.
 */
 bool QDeclarativeAnimatedImage::isPaused() const
 {
@@ -128,7 +126,8 @@ void QDeclarativeAnimatedImage::setPaused(bool pause)
   \qmlproperty bool AnimatedImage::playing
   This property holds whether the animated image is playing.
 
-  Defaults to true, so as to start playing immediately.
+  By defaults, this property is true, meaning that the animation
+  will start playing immediately.
 */
 bool QDeclarativeAnimatedImage::isPlaying() const
 {
@@ -156,9 +155,11 @@ void QDeclarativeAnimatedImage::setPlaying(bool play)
   \qmlproperty int AnimatedImage::currentFrame
   \qmlproperty int AnimatedImage::frameCount
 
-  currentFrame is the frame that is currently visible. Watching when this changes can
-  allow other things to animate at the same time as the image. frameCount is the number
-  of frames in the animation. For some animation formats, frameCount is unknown and set to zero.
+  currentFrame is the frame that is currently visible. By monitoring this property
+  for changes, you can animate other items at the same time as the image.
+
+  frameCount is the number of frames in the animation. For some animation formats,
+  frameCount is unknown and has a value of zero.
 */
 int QDeclarativeAnimatedImage::currentFrame() const
 {
diff --git a/src/declarative/graphicsitems/qdeclarativeborderimage.cpp b/src/declarative/graphicsitems/qdeclarativeborderimage.cpp
index f16770b..c58a08d 100644
--- a/src/declarative/graphicsitems/qdeclarativeborderimage.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeborderimage.cpp
@@ -56,27 +56,97 @@ QT_BEGIN_NAMESPACE
     \brief The BorderImage element provides an image that can be used as a border.
     \inherits Item
     \since 4.7
-    \ingroup qm-basic-visual-elements
+    \ingroup qml-basic-visual-elements
 
-    A BorderImage breaks an image into 9 sections, as shown below:
+    The BorderImage element is used to create borders out of images by scaling or tiling
+    parts of each image.
+
+    A BorderImage element breaks a source image, specified using the \l url property,
+    into 9 regions, as shown below:
 
     \image declarative-scalegrid.png
 
-    When the image is scaled:
+    When the image is scaled, regions of the source image are scaled or tiled to
+    create the displayed border image in the following way:
+
     \list
-    \i the corners (sections 1, 3, 7, and 9) are not scaled at all
-    \i sections 2 and 8 are scaled according to \l{BorderImage::horizontalTileMode}{horizontalTileMode}
-    \i sections 4 and 6 are scaled according to \l{BorderImage::verticalTileMode}{verticalTileMode}
-    \i the middle (section 5) is scaled according to both \l{BorderImage::horizontalTileMode}{horizontalTileMode} and \l{BorderImage::verticalTileMode}{verticalTileMode}
+    \i The corners (regions 1, 3, 7, and 9) are not scaled at all.
+    \i Regions 2 and 8 are scaled according to
+       \l{BorderImage::horizontalTileMode}{horizontalTileMode}.
+    \i Regions 4 and 6 are scaled according to
+       \l{BorderImage::verticalTileMode}{verticalTileMode}.
+    \i The middle (region 5) is scaled according to both
+       \l{BorderImage::horizontalTileMode}{horizontalTileMode} and
+       \l{BorderImage::verticalTileMode}{verticalTileMode}.
     \endlist
 
-    Examples:
-    \snippet snippets/declarative/borderimage.qml 0
+    The regions of the image are defined using the \l border property group, which
+    describes the distance from each edge of the source image to use as a border.
+
+    \section1 Example Usage
+
+    The following examples show the effects of the different modes on an image.
+    Guide lines are overlaid onto the image to show the different regions of the
+    image as described above.
+
+    \beginfloatleft
+    \image qml-borderimage-normal-image.png
+    \endfloat
+
+    An unscaled image is displayed using an Image element. The \l border property is
+    used to determine the parts of the image that will lie inside the unscaled corner
+    areas and the parts that will be stretched horizontally and vertically.
+
+    \snippet doc/src/snippets/declarative/borderimage/normal-image.qml normal image
+
+    \clearfloat
+    \beginfloatleft
+    \image qml-borderimage-scaled.png
+    \endfloat
+
+    A BorderImage element is used to display the image, and it is given a size that is
+    larger than the original image. Since the \l horizontalTileMode property is set to
+    \l{BorderImage::horizontalTileMode}{BorderImage.Stretch}, the parts of image in
+    regions 2 and 8 are stretched horizontally. Since the \l verticalTileMode property
+    is set to \l{BorderImage::verticalTileMode}{BorderImage.Stretch}, the parts of image
+    in regions 4 and 6 are stretched vertically.
+
+    \snippet doc/src/snippets/declarative/borderimage/borderimage-scaled.qml scaled border image
+
+    \clearfloat
+    \beginfloatleft
+    \image qml-borderimage-tiled.png
+    \endfloat
 
-    \image BorderImage.png
+    Again, a large BorderImage element is used to display the image. With the
+    \l horizontalTileMode property set to \l{BorderImage::horizontalTileMode}{BorderImage.Repeat},
+    the parts of image in regions 2 and 8 are tiled so that they fill the space at the
+    top and bottom of the element. Similarly, the \l verticalTileMode property is set to
+    \l{BorderImage::verticalTileMode}{BorderImage.Repeat}, the parts of image in regions
+    4 and 6 are tiled so that they fill the space at the left and right of the element.
 
-    The \l{declarative/imageelements/borderimage}{BorderImage example} shows how a BorderImage can be used to simulate a shadow effect on a
-    rectangular item.
+    \snippet doc/src/snippets/declarative/borderimage/borderimage-tiled.qml tiled border image
+
+    \clearfloat
+    In some situations, the width of regions 2 and 8 may not be an exact multiple of the width
+    of the corresponding regions in the source image. Similarly, the height of regions 4 and 6
+    may not be an exact multiple of the height of the corresponding regions. It can be useful
+    to use \l{BorderImage::horizontalTileMode}{BorderImage.Round} instead of
+    \l{BorderImage::horizontalTileMode}{BorderImage.Repeat} in cases like these.
+
+    The \l{declarative/imageelements/borderimage}{BorderImage example} shows how a BorderImage
+    can be used to simulate a shadow effect on a rectangular item.
+
+    \section1 Quality and Performance
+
+    By default, any scaled regions of the image are rendered without smoothing to improve
+    rendering speed. Setting the \l smooth property improves rendering quality of scaled
+    regions, but may slow down rendering.
+
+    The source image may not be loaded instantaneously, depending on its original location.
+    Loading progress can be monitored with the \l progress property.
+
+    \sa Image, AnimatedImage
  */
 
 QDeclarativeBorderImage::QDeclarativeBorderImage(QDeclarativeItem *parent)
@@ -93,7 +163,8 @@ QDeclarativeBorderImage::~QDeclarativeBorderImage()
 /*!
     \qmlproperty enumeration BorderImage::status
 
-    This property holds the status of image loading.  It can be one of:
+    This property describes the status of image loading.  It can be one of:
+
     \list
     \o BorderImage.Null - no image has been set
     \o BorderImage.Ready - the image has been loaded
@@ -121,20 +192,28 @@ QDeclarativeBorderImage::~QDeclarativeBorderImage()
     the image is displayed at its natural size, this property has no visual or
     performance effect.
 
+    By default, this property is set to false.
+
     \note Generally scaling artifacts are only visible if the image is stationary on
     the screen.  A common pattern when animating an image is to disable smooth
-    filtering at the beginning of the animation and reenable it at the conclusion.
+    filtering at the beginning of the animation and enable it at the conclusion.
 */
 
 /*!
     \qmlproperty url BorderImage::source
 
-    BorderImage can handle any image format supported by Qt, loaded from any URL scheme supported by Qt.
+    This property holds the URL that refers to the source image.
+
+    BorderImage can handle any image format supported by Qt, loaded from any
+    URL scheme supported by Qt.
 
-    It can also handle .sci files, which are a QML-specific format. A .sci file uses a simple text-based format that specifies
-    the borders, the image file and the tile rules.
+    It can also handle .sci files, which are a QML-specific format. A .sci
+    file uses a simple text-based format that specifies the borders, the
+    image file and the tile rules.
+
+    The following .sci file sets the borders to 10 on each side for the
+    image \c picture.png:
 
-    The following .sci file sets the borders to 10 on each side for the image \c picture.png:
     \qml
     border.left: 10
     border.top: 10
@@ -245,17 +324,21 @@ void QDeclarativeBorderImage::load()
     \qmlproperty int BorderImage::border.top
     \qmlproperty int BorderImage::border.bottom
 
-    The 4 border lines (2 horizontal and 2 vertical) break the image into 9 sections, as shown below:
+    The 4 border lines (2 horizontal and 2 vertical) break the image into 9 sections,
+    as shown below:
 
     \image declarative-scalegrid.png
 
-    Each border line (left, right, top, and bottom) specifies an offset in pixels from the respective side.
+    Each border line (left, right, top, and bottom) specifies an offset in pixels
+    from the respective edge of the source image. By default, each border line has
+    a value of 0.
+
+    For example, the following definition sets the bottom line 10 pixels up from
+    the bottom of the image:
 
-    For example:
     \qml
     border.bottom: 10
     \endqml
-    sets the bottom line 10 pixels up from the bottom of the image.
 
     The border lines can also be specified using a
     \l {BorderImage::source}{.sci file}.
@@ -274,7 +357,7 @@ QDeclarativeScaleGrid *QDeclarativeBorderImage::border()
     This property describes how to repeat or stretch the middle parts of the border image.
 
     \list
-    \o BorderImage.Stretch - Scale the image to fit to the available area.
+    \o BorderImage.Stretch - Scales the image to fit to the available area.
     \o BorderImage.Repeat - Tile the image until there is no more space. May crop the last image.
     \o BorderImage.Round - Like Repeat, but scales the images down to ensure that the last image is not cropped.
     \endlist
diff --git a/src/declarative/graphicsitems/qdeclarativeflickable.cpp b/src/declarative/graphicsitems/qdeclarativeflickable.cpp
index b302393..062bbfb 100644
--- a/src/declarative/graphicsitems/qdeclarativeflickable.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeflickable.cpp
@@ -350,24 +350,34 @@ void QDeclarativeFlickablePrivate::updateBeginningEnd()
     \brief The Flickable item provides a surface that can be "flicked".
     \inherits Item
 
-    Flickable places its children on a surface that can be dragged and flicked.
+    The Flickable item places its children on a surface that can be dragged
+    and flicked, causing the view onto the child items to scroll. This
+    behavior forms the basis of Items that are designed to show large numbers
+    of child items, such as \l ListView and \l GridView.
 
-    \code
-    import Qt 4.7
+    In traditional user interfaces, views can be scrolled using standard
+    controls, such as scroll bars and arrow buttons. In some situations, it
+    is also possible to drag the view directly by pressing and holding a
+    mouse button while moving the cursor. In touch-based user interfaces,
+    this dragging action is often complemented with a flicking action, where
+    scrolling continues after the user has stopped touching the view.
 
-    Flickable {
-        width: 200; height: 200
-        contentWidth: image.width; contentHeight: image.height
+    Flickable does not automatically clip its contents. If it is not used as
+    a full-screen item, you should consider setting the \l{Item::}{clip} property
+    to true.
 
-        Image { id: image; source: "bigImage.png" }
-    }
-    \endcode
+    \section1 Example Usage
+
+    \beginfloatright
+    \inlineimage flickable.gif
+    \endfloat
 
-    \image flickable.gif
+    The following example shows a large 
 
-    Flickable does not automatically clip its contents. If
-    it is not full-screen it is likely that \l {Item::clip}{clip} should be set
-    to \c true.
+    \clearfloat
+    \snippet doc/src/snippets/declarative/flickable.qml document
+
+    \section1 Limitations
 
     \note Due to an implementation detail, items placed inside a Flickable cannot anchor to it by
     \c id. Use \c parent instead.
@@ -491,12 +501,15 @@ void QDeclarativeFlickable::setContentY(qreal pos)
 /*!
     \qmlproperty bool Flickable::interactive
 
-    This property holds whether the user can interact with the Flickable. A user
-    cannot drag or flick a Flickable that is not interactive.
+    This property describes whether the user can interact with the Flickable.
+    A user cannot drag or flick a Flickable that is not interactive.
+
+    By default, this property is true.
 
     This property is useful for temporarily disabling flicking. This allows
-    special interaction with Flickable's children: for example, you might want to
-    freeze a flickable map while scrolling through a pop-up dialog that is a child of the Flickable.
+    special interaction with Flickable's children; for example, you might want
+    to freeze a flickable map while scrolling through a pop-up dialog that
+    is a child of the Flickable.
 */
 bool QDeclarativeFlickable::isInteractive() const
 {
@@ -1333,8 +1346,8 @@ bool QDeclarativeFlickable::isFlicking() const
     \qmlproperty bool Flickable::flickingHorizontally
     \qmlproperty bool Flickable::flickingVertically
 
-    These properties hold whether the view is currently moving horizontally
-    or vertically due to the user flicking the view.
+    These properties describe whether the view is currently moving horizontally,
+    vertically or in either direction, due to the user flicking the view.
 */
 bool QDeclarativeFlickable::isFlickingHorizontally() const
 {
@@ -1386,8 +1399,9 @@ bool QDeclarativeFlickable::isMoving() const
     \qmlproperty bool Flickable::movingHorizontally
     \qmlproperty bool Flickable::movingVertically
 
-    These properties hold whether the view is currently moving horizontally
-    or vertically due to the user either dragging or flicking the view.
+    These properties describe whether the view is currently moving horizontally,
+    vertically or in either direction, due to the user either dragging or
+    flicking the view.
 */
 bool QDeclarativeFlickable::isMovingHorizontally() const
 {
diff --git a/src/declarative/graphicsitems/qdeclarativeflipable.cpp b/src/declarative/graphicsitems/qdeclarativeflipable.cpp
index 69dd66a..4ecf87b 100644
--- a/src/declarative/graphicsitems/qdeclarativeflipable.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeflipable.cpp
@@ -71,31 +71,40 @@ public:
     \qmlclass Flipable QDeclarativeFlipable
     \since 4.7
     \ingroup qml-basic-interaction-elements
-
     \brief The Flipable item provides a surface that can be flipped.
     \inherits Item
 
     Flipable is an item that can be visibly "flipped" between its front and
-    back sides. It is used together with \l Rotation and \l {State}/\l {Transition} to
-    produce a flipping effect.
+    back sides, like a card. It is used together with \l Rotation, \l State
+    and \l Transition elements to produce a flipping effect.
+
+    The \l front and \l back properties are used to hold the items that are
+    shown respectively on the front and back sides of the flipable item.
 
-    Here is a Flipable that flips whenever it is clicked:
+    \section1 Example Usage
 
-    \snippet doc/src/snippets/declarative/flipable.qml 0
+    \beginfloatright
+    \inlineimage flipable.gif
+    \endfloat
 
-    \image flipable.gif
+    The following example shows a Flipable item that flips whenever it is
+    clicked, rotating about the y-axis.
 
     The \l Rotation element is used to specify the angle and axis of the flip.
-    When \c flipped is \c true, the item changes to the "back" state, where
+    When \c flipped is true, the item changes to the "back" state, where
     the angle is changed to 180 degrees to produce the flipping effect. 
-    Finally, the \l Transition creates the animation that changes the
-    angle over one second: when the item changes between its "back" and 
+
+    \clearfloat
+    \snippet doc/src/snippets/declarative/flipable/flipable-snippet.qml 0
+
+    The \l Transition creates the animation that changes the angle over the
+    duration of one second. When the item changes between its "back" and
     default states, the NumberAnimation animates the angle between
     its old and new values.
 
     See the \l {QML States} and \l {QML Animation} documentation for more
     details on state changes and how animations work within transitions.
-    
+
     \sa {declarative/ui-components/flipable}{Flipable example}
 */
 
diff --git a/src/declarative/graphicsitems/qdeclarativeimage.cpp b/src/declarative/graphicsitems/qdeclarativeimage.cpp
index 7a88e78..9cd9ad6 100644
--- a/src/declarative/graphicsitems/qdeclarativeimage.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeimage.cpp
@@ -51,34 +51,46 @@ QT_BEGIN_NAMESPACE
 /*!
     \qmlclass Image QDeclarativeImage
     \since 4.7
-    \ingroup qml-vasic-visual-elements
-
-    \brief The Image element allows you to add bitmaps to a scene.
+    \ingroup qml-basic-visual-elements
+    \brief The Image element displays an image in a declarative user interface
     \inherits Item
 
-    An Image element displays a specified \l source image:
+    The Image element is used to display images in a declarative user interface.
 
-    \table
-    \row
-    \o \image declarative-qtlogo.png
-    \o \qml
-        import Qt 4.7
+    The source of the image is specified as a URL using the \l source property.
+    Images can be supplied in any of the standard image formats supported by Qt,
+    including bitmap formats such as PNG and JPEG, and vector graphics formats
+    such as SVG. If you need to display animated images, use the \l AnimatedImage
+    element.
 
-        Image { source: "qtlogo.png" }
-    \endqml
-    \endtable
+    If the \l{Item::width}{width} and \l{Item::height}{height} properties are not
+    specified, the Image element automatically uses the size of the loaded image.
+    By default, specifying the width and height of the element causes the image
+    to be scaled to that size. This behavior can be changed by setting the
+    \l fillMode property, allowing the image to be stretched and tiled instead.
+
+    \section1 Example Usage
+
+    The following example shows the simplest usage of the Image element.
+
+    \snippet doc/src/snippets/declarative/image.qml document
+
+    \beginfloatleft
+    \image declarative-qtlogo.png
+    \endfloat
+
+    \clearfloat
 
-    If the \l {Item::width}{width} and \l{Item::height}{height} properties are not specified,
-    the Image element is automatically sized to the loaded image. Image elements can be 
-    stretched and tiled using the \l fillMode property.
+    \section1 Performance
 
     By default, locally available images are loaded immediately, and the user interface
     is blocked until loading is complete. If a large image is to be loaded, it may be
     preferable to load the image in a low priority thread, by enabling the \l asynchronous
     property.
 
-    If the image is from a network rather than a local resource, it is automatically loaded
-    asynchronously, and the \l progress and \l status properties are updated as appropriate.  
+    If the image is obtained from a network rather than a local resource, it is
+    automatically loaded asynchronously, and the \l progress and \l status properties
+    are updated as appropriate.
 
     Images are cached and shared internally, so if several Image elements have the same \l source,
     only one copy of the image will be loaded.
diff --git a/src/declarative/graphicsitems/qdeclarativeitem.cpp b/src/declarative/graphicsitems/qdeclarativeitem.cpp
index aca2bb7..11f9179 100644
--- a/src/declarative/graphicsitems/qdeclarativeitem.cpp
+++ b/src/declarative/graphicsitems/qdeclarativeitem.cpp
@@ -830,259 +830,259 @@ void QDeclarativeKeyNavigationAttached::keyReleased(QKeyEvent *event, bool post)
 */
 
 /*!
-    \qmlsignal Keys::onPressed(event)
+    \qmlsignal Keys::onPressed(KeyEvent event)
 
     This handler is called when a key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onReleased(event)
+    \qmlsignal Keys::onReleased(KeyEvent event)
 
     This handler is called when a key has been released. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit0Pressed(event)
+    \qmlsignal Keys::onDigit0Pressed(KeyEvent event)
 
     This handler is called when the digit '0' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit1Pressed(event)
+    \qmlsignal Keys::onDigit1Pressed(KeyEvent event)
 
     This handler is called when the digit '1' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit2Pressed(event)
+    \qmlsignal Keys::onDigit2Pressed(KeyEvent event)
 
     This handler is called when the digit '2' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit3Pressed(event)
+    \qmlsignal Keys::onDigit3Pressed(KeyEvent event)
 
     This handler is called when the digit '3' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit4Pressed(event)
+    \qmlsignal Keys::onDigit4Pressed(KeyEvent event)
 
     This handler is called when the digit '4' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit5Pressed(event)
+    \qmlsignal Keys::onDigit5Pressed(KeyEvent event)
 
     This handler is called when the digit '5' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit6Pressed(event)
+    \qmlsignal Keys::onDigit6Pressed(KeyEvent event)
 
     This handler is called when the digit '6' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit7Pressed(event)
+    \qmlsignal Keys::onDigit7Pressed(KeyEvent event)
 
     This handler is called when the digit '7' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit8Pressed(event)
+    \qmlsignal Keys::onDigit8Pressed(KeyEvent event)
 
     This handler is called when the digit '8' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDigit9Pressed(event)
+    \qmlsignal Keys::onDigit9Pressed(KeyEvent event)
 
     This handler is called when the digit '9' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onLeftPressed(event)
+    \qmlsignal Keys::onLeftPressed(KeyEvent event)
 
     This handler is called when the Left arrow has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onRightPressed(event)
+    \qmlsignal Keys::onRightPressed(KeyEvent event)
 
     This handler is called when the Right arrow has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onUpPressed(event)
+    \qmlsignal Keys::onUpPressed(KeyEvent event)
 
     This handler is called when the Up arrow has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDownPressed(event)
+    \qmlsignal Keys::onDownPressed(KeyEvent event)
 
     This handler is called when the Down arrow has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onAsteriskPressed(event)
+    \qmlsignal Keys::onAsteriskPressed(KeyEvent event)
 
     This handler is called when the Asterisk '*' has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onEscapePressed(event)
+    \qmlsignal Keys::onEscapePressed(KeyEvent event)
 
     This handler is called when the Escape key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onReturnPressed(event)
+    \qmlsignal Keys::onReturnPressed(KeyEvent event)
 
     This handler is called when the Return key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onEnterPressed(event)
+    \qmlsignal Keys::onEnterPressed(KeyEvent event)
 
     This handler is called when the Enter key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onDeletePressed(event)
+    \qmlsignal Keys::onDeletePressed(KeyEvent event)
 
     This handler is called when the Delete key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onSpacePressed(event)
+    \qmlsignal Keys::onSpacePressed(KeyEvent event)
 
     This handler is called when the Space key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onBackPressed(event)
+    \qmlsignal Keys::onBackPressed(KeyEvent event)
 
     This handler is called when the Back key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onCancelPressed(event)
+    \qmlsignal Keys::onCancelPressed(KeyEvent event)
 
     This handler is called when the Cancel key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onSelectPressed(event)
+    \qmlsignal Keys::onSelectPressed(KeyEvent event)
 
     This handler is called when the Select key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onYesPressed(event)
+    \qmlsignal Keys::onYesPressed(KeyEvent event)
 
     This handler is called when the Yes key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onNoPressed(event)
+    \qmlsignal Keys::onNoPressed(KeyEvent event)
 
     This handler is called when the No key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onContext1Pressed(event)
+    \qmlsignal Keys::onContext1Pressed(KeyEvent event)
 
     This handler is called when the Context1 key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onContext2Pressed(event)
+    \qmlsignal Keys::onContext2Pressed(KeyEvent event)
 
     This handler is called when the Context2 key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onContext3Pressed(event)
+    \qmlsignal Keys::onContext3Pressed(KeyEvent event)
 
     This handler is called when the Context3 key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onContext4Pressed(event)
+    \qmlsignal Keys::onContext4Pressed(KeyEvent event)
 
     This handler is called when the Context4 key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onCallPressed(event)
+    \qmlsignal Keys::onCallPressed(KeyEvent event)
 
     This handler is called when the Call key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onHangupPressed(event)
+    \qmlsignal Keys::onHangupPressed(KeyEvent event)
 
     This handler is called when the Hangup key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onFlipPressed(event)
+    \qmlsignal Keys::onFlipPressed(KeyEvent event)
 
     This handler is called when the Flip key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onMenuPressed(event)
+    \qmlsignal Keys::onMenuPressed(KeyEvent event)
 
     This handler is called when the Menu key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onVolumeUpPressed(event)
+    \qmlsignal Keys::onVolumeUpPressed(KeyEvent event)
 
     This handler is called when the VolumeUp key has been pressed. The \a event
     parameter provides information about the event.
 */
 
 /*!
-    \qmlsignal Keys::onVolumeDownPressed(event)
+    \qmlsignal Keys::onVolumeDownPressed(KeyEvent event)
 
     This handler is called when the VolumeDown key has been pressed. The \a event
     parameter provides information about the event.
diff --git a/src/declarative/graphicsitems/qdeclarativelistview.cpp b/src/declarative/graphicsitems/qdeclarativelistview.cpp
index 2eae0af..177c5b3 100644
--- a/src/declarative/graphicsitems/qdeclarativelistview.cpp
+++ b/src/declarative/graphicsitems/qdeclarativelistview.cpp
@@ -1432,7 +1432,7 @@ void QDeclarativeListViewPrivate::flick(AxisData &data, qreal minExtent, qreal m
     to set \e {clip: true} in order to have the out of view items clipped
     nicely.
 
-    \sa {Data Models}, GridView, {declarative/modelviews/listview}{ListView examples}
+    \sa {QML Data Models}, GridView, {declarative/modelviews/listview}{ListView examples}
 */
 
 QDeclarativeListView::QDeclarativeListView(QDeclarativeItem *parent)
diff --git a/src/declarative/graphicsitems/qdeclarativemousearea.cpp b/src/declarative/graphicsitems/qdeclarativemousearea.cpp
index ec01549..5516611 100644
--- a/src/declarative/graphicsitems/qdeclarativemousearea.cpp
+++ b/src/declarative/graphicsitems/qdeclarativemousearea.cpp
@@ -250,7 +250,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate()
 */
 
 /*!
-    \qmlsignal MouseArea::onClicked(mouse)
+    \qmlsignal MouseArea::onClicked(MouseEvent mouse)
 
     This handler is called when there is a click. A click is defined as a press followed by a release,
     both inside the MouseArea (pressing, moving outside the MouseArea, and then moving back inside and
@@ -263,7 +263,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate()
 */
 
 /*!
-    \qmlsignal MouseArea::onPressed(mouse)
+    \qmlsignal MouseArea::onPressed(MouseEvent mouse)
 
     This handler is called when there is a press.
     The \l {MouseEvent}{mouse} parameter provides information about the press, including the x and y
@@ -277,7 +277,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate()
 */
 
 /*!
-    \qmlsignal MouseArea::onReleased(mouse)
+    \qmlsignal MouseArea::onReleased(MouseEvent mouse)
 
     This handler is called when there is a release.
     The \l {MouseEvent}{mouse} parameter provides information about the click, including the x and y
@@ -287,7 +287,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate()
 */
 
 /*!
-    \qmlsignal MouseArea::onPressAndHold(mouse)
+    \qmlsignal MouseArea::onPressAndHold(MouseEvent mouse)
 
     This handler is called when there is a long press (currently 800ms).
     The \l {MouseEvent}{mouse} parameter provides information about the press, including the x and y
@@ -297,7 +297,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate()
 */
 
 /*!
-    \qmlsignal MouseArea::onDoubleClicked(mouse)
+    \qmlsignal MouseArea::onDoubleClicked(MouseEvent mouse)
 
     This handler is called when there is a double-click (a press followed by a release followed by a press).
     The \l {MouseEvent}{mouse} parameter provides information about the click, including the x and y
diff --git a/src/declarative/graphicsitems/qdeclarativepositioners.cpp b/src/declarative/graphicsitems/qdeclarativepositioners.cpp
index 77b26b9..e2a373f 100644
--- a/src/declarative/graphicsitems/qdeclarativepositioners.cpp
+++ b/src/declarative/graphicsitems/qdeclarativepositioners.cpp
@@ -323,58 +323,65 @@ void QDeclarativeBasePositioner::finishApplyTransitions()
 
 /*!
   \qmlclass Column QDeclarativeColumn
-    \ingroup qml-positioning-elements
-    \since 4.7
+  \ingroup qml-positioning-elements
+  \since 4.7
   \brief The Column item arranges its children vertically.
   \inherits Item
 
   The Column item positions its child items so that they are vertically
-    aligned and not overlapping. Spacing between items can be added.
+  aligned and not overlapping.
 
-  The below example positions differently shaped rectangles using a Column.
-  \table
-  \row
-  \o \image verticalpositioner_example.png
-  \o
-  \qml
-Column {
-    spacing: 2
-    Rectangle { color: "red"; width: 50; height: 50 }
-    Rectangle { color: "green"; width: 20; height: 50 }
-    Rectangle { color: "blue"; width: 50; height: 20 }
-}
-  \endqml
-  \endtable
+  Spacing between items can be added using the \l spacing property.
+  Transitions can be used for cases where items managed by a Column are
+  added or moved. These are stored in the \l add and \l move properties
+  respectively.
+
+  See \l{Using QML Positioner and Repeater Items} for more details about this item and other
+  related items.
+
+  \section1 Example Usage
+
+  The following example positions differently shaped rectangles using a Column
+  item.
+
+  \image verticalpositioner_example.png
+
+  \snippet doc/src/snippets/declarative/column/vertical-positioner.qml document
+
+  \section1 Using Transitions
+
+  Transitions can be used to animate items that are added to, moved within,
+  or removed from a Column item. The \l add and \l move properties can be set to
+  the transitions that will be applied when items are added to, removed from,
+  or re-positioned within a Column item.
+
+  The use of transitions with positioners is described in more detail in the
+  \l{Using QML Positioner and Repeater Items#Using Transitions}{Using QML
+  Positioner and Repeater Items} document.
 
-  Column also provides for transitions to be set when items are added, moved,
-  or removed in the positioner. Adding and removing apply both to items which are deleted
-  or have their position in the document changed so as to no longer be children of the positioner,
-  as well as to items which have their opacity set to or from zero so as to appear or disappear.
+  \image verticalpositioner_transition.gif
 
-  \table
-  \row
-  \o \image verticalpositioner_transition.gif
-  \o
   \qml
-Column {
-    spacing: 2
-    add: ...
-    move: ...
-    ...
-}
+  Column {
+      spacing: 2
+      add: ...
+      move: ...
+      ...
+  }
   \endqml
-  \endtable
+
+  \section1 Limitations
 
   Note that the positioner assumes that the x and y positions of its children
   will not change. If you manually change the x or y properties in script, bind
   the x or y properties, use anchors on a child of a positioner, or have the
   height of a child depend on the position of a child, then the
-  positioner may exhibit strange behaviour. If you need to perform any of these
+  positioner may exhibit strange behavior. If you need to perform any of these
   actions, consider positioning the items without the use of a Column.
 
   Items with a width or height of 0 will not be positioned.
 
-  \sa Row, {declarative/positioners}{Positioners example}
+  \sa Row, Grid, Flow, {declarative/positioners}{Positioners example}
 */
 /*!
     \qmlproperty Transition Column::add
@@ -382,55 +389,47 @@ Column {
     This property holds the transition to be applied when adding an
     item to the positioner. The transition will only be applied to the
     added item(s).  Positioner transitions will only affect the
-    position (x,y) of items.
-
-    Added can mean that either the object has been created or
-    reparented, and thus is now a child or the positioner, or that the
-    object has had its opacity increased from zero, and thus is now
-    visible.
+    position (x, y) of items.
 
+    For a positioner, adding an item can mean that either the object
+    has been created or reparented, and thus is now a child or the
+    positioner, or that the object has had its opacity increased from
+    zero, and thus is now visible.
 
+    \sa move
 */
 /*!
     \qmlproperty Transition Column::move
 
     This property holds the transition to apply when moving an item
     within the positioner.  Positioner transitions will only affect
-    the position (x,y) of items.
+    the position (x, y) of items.
+
+    This transition can be performed when other items are added or removed
+    from the positioner, or when items resize themselves.
 
-    This can happen when other items are added or removed from the
-    positioner, or when items resize themselves.
+    \image positioner-move.gif
 
-    \table
-    \row
-    \o \image positioner-move.gif
-    \o
     \qml
-Column {
-    move: Transition {
-        NumberAnimation {
-            properties: "y"
-            easing.type: Easing.OutBounce
+    Column {
+        move: Transition {
+            NumberAnimation {
+                properties: "y"
+                easing.type: Easing.OutBounce
+            }
         }
     }
-}
     \endqml
-    \endtable
+
+    \sa add, {declarative/positioners}{Positioners example}
 */
 /*!
   \qmlproperty int Column::spacing
 
-  spacing is the amount in pixels left empty between each adjacent
-  item, and defaults to 0.
-
-  The below example places a \l Grid containing a red, a blue and a
-  green rectangle on a gray background. The area the grid positioner
-  occupies is colored white. The top positioner has the default of no spacing,
-  and the bottom positioner has its spacing set to 2.
-
-  \image spacing_a.png
-  \image spacing_b.png
+  The spacing is the amount in pixels left empty between adjacent
+  items. The default spacing is 0.
 
+  \sa Grid::spacing
 */
 QDeclarativeColumn::QDeclarativeColumn(QDeclarativeItem *parent)
 : QDeclarativeBasePositioner(Vertical, parent)
@@ -484,29 +483,38 @@ void QDeclarativeColumn::reportConflictingAnchors()
 
 /*!
   \qmlclass Row QDeclarativeRow
-    \ingroup qml-positioning-elements
+  \ingroup qml-positioning-elements
   \since 4.7
   \brief The Row item arranges its children horizontally.
   \inherits Item
 
-  The Row item positions its child items so that they are
-  horizontally aligned and not overlapping. 
+  The Row item positions its child items so that they are horizontally
+  aligned and not overlapping. 
 
   Use \l spacing to set the spacing between items in a Row, and use the
   \l add and \l move properties to set the transitions that should be applied
   when items are added to, removed from, or re-positioned within the Row.
 
-  The below example lays out differently shaped rectangles using a Row.
-  \qml
-Row {
-    spacing: 2
-    Rectangle { color: "red"; width: 50; height: 50 }
-    Rectangle { color: "green"; width: 20; height: 50 }
-    Rectangle { color: "blue"; width: 50; height: 20 }
-}
-  \endqml
+  See \l{Using QML Positioner and Repeater Items} for more details about this item and other
+  related items.
+
+  \section1 Example Usage
+
+  The following example lays out differently shaped rectangles using a Row.
+
   \image horizontalpositioner_example.png
 
+  \snippet doc/src/snippets/declarative/row/row.qml document
+
+  \section1 Using Transitions
+
+  Transitions can be used to animate items that are added to, moved within,
+  or removed from a Grid item. The \l add and \l move properties can be set to
+  the transitions that will be applied when items are added to, removed from,
+  or re-positioned within a Row item.
+
+  \section1 Limitations
+
   Note that the positioner assumes that the x and y positions of its children
   will not change. If you manually change the x or y properties in script, bind
   the x or y properties, use anchors on a child of a positioner, or have the
@@ -516,56 +524,54 @@ Row {
 
   Items with a width or height of 0 will not be positioned.
 
-  \sa Column, {declarative/positioners}{Positioners example}
+  \sa Column, Grid, Flow, {declarative/positioners}{Positioners example}
 */
 /*!
     \qmlproperty Transition Row::add
-    This property holds the transition to apply when adding an item to the positioner.
-    The transition will only be applied to the added item(s).
-    Positioner transitions will only affect the position (x,y) of items.
-
-    An object is considered to be added to the positioner if it has been
-    created or reparented and thus is now a child or the positioner, or if the
-    object has had its opacity increased from zero, and thus is now
-    visible.
+
+    This property holds the transition to be applied when adding an
+    item to the positioner. The transition will only be applied to the
+    added item(s).  Positioner transitions will only affect the
+    position (x, y) of items.
+
+    For a positioner, adding an item can mean that either the object
+    has been created or reparented, and thus is now a child or the
+    positioner, or that the object has had its opacity increased from
+    zero, and thus is now visible.
+
+    \sa move
 */
 /*!
     \qmlproperty Transition Row::move
 
-    This property holds the transition to apply when moving an item
-    within the positioner.  Positioner transitions will only affect
-    the position (x,y) of items.
+    This property holds the transition to be applied when moving an
+    item within the positioner. Positioner transitions will only affect
+    the position (x, y) of items.
 
-    This can happen when other items are added or removed from the
-    positioner, or when items resize themselves.
+    This transition can be performed when other items are added or removed
+    from the positioner, or when items resize themselves.
 
     \qml
-Row {
-    id: positioner
-    move: Transition {
-        NumberAnimation {
-            properties: "x"
-            ease: "easeOutBounce"
+    Row {
+        id: positioner
+        move: Transition {
+            NumberAnimation {
+                properties: "x"
+                ease: "easeOutBounce"
+            }
         }
     }
-}
     \endqml
 
+    \sa add, {declarative/positioners}{Positioners example}
 */
 /*!
   \qmlproperty int Row::spacing
 
-  spacing is the amount in pixels left empty between each adjacent
-  item, and defaults to 0.
-
-  The below example places a \l Grid containing a red, a blue and a
-  green rectangle on a gray background. The area the grid positioner
-  occupies is colored white. The top positioner has the default of no spacing,
-  and the bottom positioner has its spacing set to 2.
-
-  \image spacing_a.png
-  \image spacing_b.png
+  The spacing is the amount in pixels left empty between adjacent
+  items. The default spacing is 0.
 
+  \sa Grid::spacing
 */
 QDeclarativeRow::QDeclarativeRow(QDeclarativeItem *parent)
 : QDeclarativeBasePositioner(Horizontal, parent)
@@ -618,47 +624,46 @@ void QDeclarativeRow::reportConflictingAnchors()
 
 /*!
   \qmlclass Grid QDeclarativeGrid
-    \ingroup qml-positioning-elements
+  \ingroup qml-positioning-elements
   \since 4.7
   \brief The Grid item positions its children in a grid.
   \inherits Item
 
   The Grid item positions its child items so that they are
   aligned in a grid and are not overlapping. 
-  
-  Spacing can be added
-  between child items. It also provides for transitions to be set when items are
-  added, moved, or removed in the positioner. Adding and removing apply
-  both to items which are deleted or have their position in the
-  document changed so as to no longer be children of the positioner, as
-  well as to items which have their opacity set to or from zero so
-  as to appear or disappear.
-
-  A Grid defaults to four columns, and as many rows as
-  are necessary to fit all child items. The number of rows
-  and/or the number of columns can be constrained by setting the \l rows
-  or \l columns properties. The grid positioner calculates a grid with
-  rectangular cells of sufficient size to hold all items, and then
-  places the items in the cells, going across then down, and
-  positioning each item at the (0,0) corner of the cell. The below
-  example demonstrates this.
-
-  \table
-  \row
-  \o \image gridLayout_example.png
-  \o
-  \qml
-Grid {
-    columns: 3
-    spacing: 2
-    Rectangle { color: "red"; width: 50; height: 50 }
-    Rectangle { color: "green"; width: 20; height: 50 }
-    Rectangle { color: "blue"; width: 50; height: 20 }
-    Rectangle { color: "cyan"; width: 50; height: 50 }
-    Rectangle { color: "magenta"; width: 10; height: 10 }
-}
-  \endqml
-  \endtable
+
+  The grid positioner calculates a grid of rectangular cells of sufficient
+  size to hold all items, placing the items in the cells, from left to right
+  and top to bottom. Each item is positioned in the top-left corner of its
+  cell with position (0, 0).
+
+  A Grid defaults to four columns, and as many rows as are necessary to
+  fit all child items. The number of rows and columns can be constrained
+  by setting the \l rows and \l columns properties.
+
+  Spacing can be added between child items by setting the \l spacing
+  property. The amount of spacing applied will be the same in the
+  horizontal and vertical directions.
+
+  See \l{Using QML Positioner and Repeater Items} for more details about this item and other
+  related items.
+
+  \section1 Example Usage
+
+  The following example demonstrates this.
+
+  \image gridLayout_example.png
+
+  \snippet doc/src/snippets/declarative/grid/grid.qml document
+
+  \section1 Using Transitions
+
+  Transitions can be used to animate items that are added to, moved within,
+  or removed from a Grid item. The \l add and \l move properties can be set to
+  the transitions that will be applied when items are added to, removed from,
+  or re-positioned within a Grid item.
+
+  \section1 Limitations
 
   Note that the positioner assumes that the x and y positions of its children
   will not change. If you manually change the x or y properties in script, bind
@@ -669,55 +674,62 @@ Grid {
 
   Items with a width or height of 0 will not be positioned.
 
-  \sa Flow, {declarative/positioners}{Positioners example}
+  \sa Flow, Row, Column, {declarative/positioners}{Positioners example}
 */
 /*!
     \qmlproperty Transition Grid::add
-    This property holds the transition to apply when adding an item to the positioner.
-    The transition is only applied to the added item(s).
-    Positioner transitions will only affect the position (x,y) of items,
-    as that is all the positioners affect. To animate other property change
-    you will have to do so based on how you have changed those properties.
-
-    An object is considered to be added to the positioner if it has been
-    created or reparented and thus is now a child or the positioner, or if the
-    object has had its opacity increased from zero, and thus is now
-    visible.
+
+    This property holds the transition to be applied when adding an
+    item to the positioner. The transition will only be applied to the
+    added item(s).  Positioner transitions will only affect the
+    position (x, y) of items.
+
+    For a positioner, adding an item can mean that either the object
+    has been created or reparented, and thus is now a child or the
+    positioner, or that the object has had its opacity increased from
+    zero, and thus is now visible.
+
+    \sa move
 */
 /*!
     \qmlproperty Transition Grid::move
-    This property holds the transition to apply when moving an item within the positioner.
-    Positioner transitions will only affect the position (x,y) of items.
 
-    This can happen when other items are added or removed from the positioner, or
-    when items resize themselves.
+    This property holds the transition to be applied when moving an
+    item within the positioner. Positioner transitions will only affect
+    the position (x, y) of items.
+
+    This transition can be performed when other items are added or removed
+    from the positioner, or when items resize themselves.
 
     \qml
-Grid {
-    move: Transition {
-        NumberAnimation {
-            properties: "x,y"
-            ease: "easeOutBounce"
+    Grid {
+        move: Transition {
+            NumberAnimation {
+                properties: "x,y"
+                ease: "easeOutBounce"
+            }
         }
     }
-}
     \endqml
 
+    \sa add, {declarative/positioners}{Positioners example}
 */
 /*!
   \qmlproperty int Grid::spacing
 
-  spacing is the amount in pixels left empty between each adjacent
-  item, and defaults to 0.
+  The spacing is the amount in pixels left empty between adjacent
+  items. The default spacing is 0.
 
   The below example places a Grid containing a red, a blue and a
   green rectangle on a gray background. The area the grid positioner
-  occupies is colored white. The top positioner has the default of no spacing,
-  and the bottom positioner has its spacing set to 2.
+  occupies is colored white. The positioner on the left has the
+  no spacing (the default), and the positioner on the right has
+  a spacing of 6.
 
-  \image spacing_a.png
-  \image spacing_b.png
+  \inlineimage qml-grid-no-spacing.png
+  \inlineimage qml-grid-spacing.png
 
+  \sa rows, columns
 */
 QDeclarativeGrid::QDeclarativeGrid(QDeclarativeItem *parent) :
     QDeclarativeBasePositioner(Both, parent), m_rows(-1), m_columns(-1), m_flow(LeftToRight)
@@ -726,7 +738,9 @@ QDeclarativeGrid::QDeclarativeGrid(QDeclarativeItem *parent) :
 
 /*!
     \qmlproperty int Grid::columns
-    This property holds the number of columns in the grid.
+
+    This property holds the number of columns in the grid. The default
+    number of columns is 4.
 
     If the grid does not have enough items to fill the specified
     number of columns, some columns will be of zero width.
@@ -912,13 +926,43 @@ void QDeclarativeGrid::reportConflictingAnchors()
 
 /*!
   \qmlclass Flow QDeclarativeFlow
-    \ingroup qml-positioning-elements
+  \ingroup qml-positioning-elements
   \since 4.7
   \brief The Flow item arranges its children side by side, wrapping as necessary.
   \inherits Item
 
-  The Flow item positions its child items so that they are side by side and are
-  not overlapping.
+  The Flow item positions its child items like words on a page, wrapping them
+  to create rows or columns of items that do not overlap.
+
+  Spacing between items can be added using the \l spacing property.
+  Transitions can be used for cases where items managed by a Column are
+  added or moved. These are stored in the \l add and \l move properties
+  respectively.
+
+  See \l{Using QML Positioner and Repeater Items} for more details about this item and other
+  related items.
+
+  \section1 Example Usage
+
+  The following example positions \l Text items within a parent item using
+  a Flow item.
+
+  \image qml-flow-snippet.png
+
+  \snippet doc/src/snippets/declarative/flow.qml flow item
+
+  \section1 Using Transitions
+
+  Transitions can be used to animate items that are added to, moved within,
+  or removed from a Flow item. The \l add and \l move properties can be set to
+  the transitions that will be applied when items are added to, removed from,
+  or re-positioned within a Flow item.
+
+  The use of transitions with positioners is described in more detail in the
+  \l{Using QML Positioner and Repeater Items#Using Transitions}{Using QML
+  Positioner and Repeater Items} document.
+
+  \section1 Limitations
 
   Note that the positioner assumes that the x and y positions of its children
   will not change. If you manually change the x or y properties in script, bind
@@ -929,38 +973,46 @@ void QDeclarativeGrid::reportConflictingAnchors()
 
   Items with a width or height of 0 will not be positioned.
 
-    \sa Grid, {declarative/positioners}{Positioners example}
+  \sa Column, Row, Grid, {declarative/positioners}{Positioners example}
 */
 /*!
     \qmlproperty Transition Flow::add
-    This property holds the transition to apply when adding an item to the positioner.
-    The transition will only be applied to the added item(s).
-    Positioner transitions will only affect the position (x,y) of items.
-
-    An object is considered to be added to the positioner if it has been
-    created or reparented and thus is now a child or the positioner, or if the
-    object has had its opacity increased from zero, and thus is now
-    visible.
+
+    This property holds the transition to be applied when adding an
+    item to the positioner. The transition will only be applied to the
+    added item(s).  Positioner transitions will only affect the
+    position (x, y) of items.
+
+    For a positioner, adding an item can mean that either the object
+    has been created or reparented, and thus is now a child or the
+    positioner, or that the object has had its opacity increased from
+    zero, and thus is now visible.
+
+    \sa move
 */
 /*!
     \qmlproperty Transition Flow::move
-    This property holds the transition to apply when moving an item within the positioner.
-    Positioner transitions will only affect the position (x,y) of items.
 
-    This can happen when other items are added or removed from the positioner, or when items resize themselves.
+    This property holds the transition to be applied when moving an
+    item within the positioner. Positioner transitions will only affect
+    the position (x, y) of items.
+
+    This transition can be performed when other items are added or removed
+    from the positioner, or when items resize themselves.
 
     \qml
-Flow {
-    id: positioner
-    move: Transition {
-        NumberAnimation {
-            properties: "x,y"
-            ease: "easeOutBounce"
+    Flow {
+        id: positioner
+        move: Transition {
+            NumberAnimation {
+                properties: "x,y"
+                ease: "easeOutBounce"
+            }
         }
     }
-}
     \endqml
 
+    \sa add, {declarative/positioners}{Positioners example}
 */
 /*!
   \qmlproperty int Flow::spacing
@@ -968,6 +1020,7 @@ Flow {
   spacing is the amount in pixels left empty between each adjacent
   item, and defaults to 0.
 
+  \sa Grid::spacing
 */
 
 class QDeclarativeFlowPrivate : public QDeclarativeBasePositionerPrivate
diff --git a/src/declarative/graphicsitems/qdeclarativerepeater.cpp b/src/declarative/graphicsitems/qdeclarativerepeater.cpp
index 97cf05c..00f2848 100644
--- a/src/declarative/graphicsitems/qdeclarativerepeater.cpp
+++ b/src/declarative/graphicsitems/qdeclarativerepeater.cpp
@@ -78,9 +78,9 @@ QDeclarativeRepeaterPrivate::~QDeclarativeRepeaterPrivate()
     The following Repeater creates three instances of a \l Rectangle item within
     a \l Row:
 
-    \snippet doc/src/snippets/declarative/repeater.qml import
+    \snippet doc/src/snippets/declarative/repeaters/repeater.qml import
     \codeline
-    \snippet doc/src/snippets/declarative/repeater.qml simple
+    \snippet doc/src/snippets/declarative/repeaters/repeater.qml simple
 
     \image repeater-simple.png
 
@@ -92,7 +92,7 @@ QDeclarativeRepeaterPrivate::~QDeclarativeRepeaterPrivate()
     a Repeater to be used inside a layout. For example, the following Repeater's
     items are stacked between a red rectangle and a blue rectangle:
    
-    \snippet doc/src/snippets/declarative/repeater.qml layout
+    \snippet doc/src/snippets/declarative/repeaters/repeater.qml layout
 
     \image repeater.png
 
@@ -106,7 +106,7 @@ QDeclarativeRepeaterPrivate::~QDeclarativeRepeaterPrivate()
 
     \table
     \row
-    \o \snippet doc/src/snippets/declarative/repeater.qml index
+    \o \snippet doc/src/snippets/declarative/repeaters/repeater.qml index
     \o \image repeater-index.png
     \endtable
 
@@ -115,7 +115,7 @@ QDeclarativeRepeaterPrivate::~QDeclarativeRepeaterPrivate()
 
     \table
     \row
-    \o \snippet doc/src/snippets/declarative/repeater.qml modeldata
+    \o \snippet doc/src/snippets/declarative/repeaters/repeater.qml modeldata
     \o \image repeater-modeldata.png
     \endtable
 
diff --git a/src/declarative/graphicsitems/qdeclarativetext.cpp b/src/declarative/graphicsitems/qdeclarativetext.cpp
index f16af88..fd3a1f7 100644
--- a/src/declarative/graphicsitems/qdeclarativetext.cpp
+++ b/src/declarative/graphicsitems/qdeclarativetext.cpp
@@ -1205,7 +1205,7 @@ void QDeclarativeText::mousePressEvent(QGraphicsSceneMouseEvent *event)
 }
 
 /*!
-    \qmlsignal Text::onLinkActivated(link)
+    \qmlsignal Text::onLinkActivated(string link)
 
     This handler is called when the user clicks on a link embedded in the text.
 */
diff --git a/src/declarative/graphicsitems/qdeclarativetextedit.cpp b/src/declarative/graphicsitems/qdeclarativetextedit.cpp
index b1c0fcd..3ac095c 100644
--- a/src/declarative/graphicsitems/qdeclarativetextedit.cpp
+++ b/src/declarative/graphicsitems/qdeclarativetextedit.cpp
@@ -555,7 +555,7 @@ QRectF QDeclarativeTextEdit::positionToRectangle(int pos) const
 }
 
 /*!
-    \qmlmethod int TextEdit::positionAt(x,y)
+    \qmlmethod int TextEdit::positionAt(int x, int y)
 
     Returns the text position closest to pixel position (\a x, \a y).
 
@@ -1018,7 +1018,7 @@ void QDeclarativeTextEdit::selectWord()
 }
 
 /*!
-    \qmlmethod void TextEdit::select(start,end)
+    \qmlmethod void TextEdit::select(int start, int end)
 
     Causes the text from \a start to \a end to be selected.
 
diff --git a/src/declarative/qml/qdeclarativecomponent.cpp b/src/declarative/qml/qdeclarativecomponent.cpp
index 74de738..7f58166 100644
--- a/src/declarative/qml/qdeclarativecomponent.cpp
+++ b/src/declarative/qml/qdeclarativecomponent.cpp
@@ -573,7 +573,7 @@ QDeclarativeComponent::QDeclarativeComponent(QDeclarativeComponentPrivate &dd, Q
 }
 
 /*!
-    \qmlmethod object Component::createObject(parent)
+    \qmlmethod object Component::createObject(Item parent)
 
     Creates and returns an object instance of this component that will have the given 
     \a parent. Returns null if object creation fails.
diff --git a/src/declarative/qml/qdeclarativeengine.cpp b/src/declarative/qml/qdeclarativeengine.cpp
index e77a53e..9de5a77 100644
--- a/src/declarative/qml/qdeclarativeengine.cpp
+++ b/src/declarative/qml/qdeclarativeengine.cpp
@@ -272,8 +272,8 @@ QDeclarativeEnginePrivate::QDeclarativeEnginePrivate(QDeclarativeEngine *e)
 }
 
 /*!
-  \qmlmethod url Qt::resolvedUrl(url)
-  Returns \c url resolved relative to the URL of the caller.
+  \qmlmethod url Qt::resolvedUrl(url url)
+  Returns \a url resolved relative to the URL of the caller.
 */
 QUrl QDeclarativeScriptEngine::resolvedUrl(QScriptContext *context, const QUrl& url)
 {
diff --git a/src/declarative/qml/qdeclarativeinclude.cpp b/src/declarative/qml/qdeclarativeinclude.cpp
index f26b54f..1e240d7 100644
--- a/src/declarative/qml/qdeclarativeinclude.cpp
+++ b/src/declarative/qml/qdeclarativeinclude.cpp
@@ -173,7 +173,7 @@ void QDeclarativeInclude::callback(QScriptEngine *engine, QScriptValue &callback
 }
 
 /*!
-\qmlmethod object Qt::include(url, callback)
+\qmlmethod object Qt::include(string url, jsobject callback)
 
 Include another JavaScript file.  This method can only be used from within JavaScript files, 
 and not regular QML files.
diff --git a/src/declarative/qml/qdeclarativetypeloader.cpp b/src/declarative/qml/qdeclarativetypeloader.cpp
index 8c291f2..9b42065 100644
--- a/src/declarative/qml/qdeclarativetypeloader.cpp
+++ b/src/declarative/qml/qdeclarativetypeloader.cpp
@@ -65,6 +65,9 @@ The QDeclarativeDataLoader invokes callbacks on the QDeclarativeDataBlob as data
 /*!
 \enum QDeclarativeDataBlob::Status
 
+This enum describes the status of the data blob.
+
+\list
 \o Null The blob has not yet been loaded by a QDeclarativeDataLoader
 \o Loading The blob is loading network data.  The QDeclarativeDataBlob::setData() callback has not yet been
 invoked or has not yet returned.
@@ -73,13 +76,19 @@ only occurs after the QDeclarativeDataBlob::setData() callback has been made, an
 dependencies.
 \o Complete The blob's data has been loaded and all dependencies are done.
 \o Error An error has been set on this blob.
+\endlist
 */
 
 /*!
 \enum QDeclarativeDataBlob::Type
+
+This enum describes the type of the data blob.
+
+\list
 \o QmlFile This is a QDeclarativeTypeData
 \o JavaScriptFile This is a QDeclarativeScriptData
 \o QmldirFile This is a QDeclarativeQmldirData
+\endlist
 */
 
 /*!
@@ -215,7 +224,7 @@ void QDeclarativeDataBlob::setError(const QDeclarativeError &errors)
 }
 
 /*!
-\override
+\overload
 */
 void QDeclarativeDataBlob::setError(const QList<QDeclarativeError> &errors)
 {
diff --git a/src/declarative/util/qdeclarativelistmodel.cpp b/src/declarative/util/qdeclarativelistmodel.cpp
index 7504c23..f290ab2 100644
--- a/src/declarative/util/qdeclarativelistmodel.cpp
+++ b/src/declarative/util/qdeclarativelistmodel.cpp
@@ -766,7 +766,7 @@ bool QDeclarativeListModelParser::definesEmptyList(const QString &s)
 }
 
 /*!
-    \qmlclass ListElement
+    \qmlclass ListElement QDeclarativeListElement
     \ingroup qml-working-with-data
     \since 4.7
     \brief The ListElement element defines a data item in a ListModel.
@@ -1247,7 +1247,6 @@ void ModelNode::setObjectValue(const QScriptValue& valuemap) {
 }
 
 void ModelNode::setListValue(const QScriptValue& valuelist) {
-    QScriptValueIterator it(valuelist);
     values.clear();
     int size = valuelist.property(QLatin1String("length")).toInt32();
     for (int i=0; i<size; i++) {
diff --git a/src/declarative/util/qdeclarativelistmodelworkeragent.cpp b/src/declarative/util/qdeclarativelistmodelworkeragent.cpp
index 498de6d..d9df169 100644
--- a/src/declarative/util/qdeclarativelistmodelworkeragent.cpp
+++ b/src/declarative/util/qdeclarativelistmodelworkeragent.cpp
@@ -232,7 +232,7 @@ bool QDeclarativeListModelWorkerAgent::event(QEvent *e)
                     emit m_orig->itemsMoved(change.index, change.to, change.count);
                     break;
                 case Change::Changed:
-                    emit m_orig->itemsMoved(change.index, change.to, change.count);
+                    emit m_orig->itemsChanged(change.index, change.to, orig->m_roles.keys());
                     break;
                 }
             }
diff --git a/src/gui/graphicsview/qgraphicsitem.cpp b/src/gui/graphicsview/qgraphicsitem.cpp
index fc122d2..7a5b8de 100644
--- a/src/gui/graphicsview/qgraphicsitem.cpp
+++ b/src/gui/graphicsview/qgraphicsitem.cpp
@@ -10900,8 +10900,8 @@ QVariant QGraphicsSimpleTextItem::extension(const QVariant &variant) const
 
 /*!
     \class QGraphicsItemGroup
-    \brief The QGraphicsItemGroup class provides treating a group of items as
-    one.
+    \brief The QGraphicsItemGroup class provides a container that treats
+    a group of items as a single item.
     \since 4.2
     \ingroup graphicsview-api
 
diff --git a/src/gui/image/qpixmap_s60.cpp b/src/gui/image/qpixmap_s60.cpp
index dbdf0bc..47249d9 100644
--- a/src/gui/image/qpixmap_s60.cpp
+++ b/src/gui/image/qpixmap_s60.cpp
@@ -66,9 +66,10 @@ const uchar qt_pixmap_bit_mask[] = { 0x01, 0x02, 0x04, 0x08,
 static bool cleanup_function_registered = false;
 static QS60PixmapData *firstPixmap = 0;
 
-static void qt_symbian_register_pixmap(QS60PixmapData *pd)
+// static
+void QS60PixmapData::qt_symbian_register_pixmap(QS60PixmapData *pd)
 {
-    if(!cleanup_function_registered) {
+    if (!cleanup_function_registered) {
         qAddPostRoutine(qt_symbian_release_pixmaps);
         cleanup_function_registered = true;
     }
@@ -80,7 +81,8 @@ static void qt_symbian_register_pixmap(QS60PixmapData *pd)
     firstPixmap = pd;
 }
 
-static void qt_symbian_unregister_pixmap(QS60PixmapData *pd)
+// static
+void QS60PixmapData::qt_symbian_unregister_pixmap(QS60PixmapData *pd)
 {
     if (pd->next)
         pd->next->prev = pd->prev;
@@ -90,7 +92,8 @@ static void qt_symbian_unregister_pixmap(QS60PixmapData *pd)
         firstPixmap = pd->next;
 }
 
-static void qt_symbian_release_pixmaps()
+// static
+void QS60PixmapData::qt_symbian_release_pixmaps()
 {
     // Scan all QS60PixmapData objects in the system and destroy them.
     QS60PixmapData *pd = firstPixmap;
@@ -828,7 +831,6 @@ void* QS60PixmapData::toNativeType(NativeType type)
         bool convertToArgb32 = false;
         bool needsCopy = false;
 
-        QSysInfo::SymbianVersion symbianVersion = QSysInfo::symbianVersion();
         if (!(S60->supportsPremultipliedAlpha)) {
             // Convert argb32_premultiplied to argb32 since Symbian 9.2 does
             // not support premultipied format.
diff --git a/src/gui/image/qpixmap_s60_p.h b/src/gui/image/qpixmap_s60_p.h
index a82f5c2..42cc830 100644
--- a/src/gui/image/qpixmap_s60_p.h
+++ b/src/gui/image/qpixmap_s60_p.h
@@ -63,11 +63,6 @@ class CFbsBitGc;
 
 class QSymbianBitmapDataAccess;
 
-class QS60PixmapData;
-void qt_symbian_register_pixmap(QS60PixmapData *pd);
-void qt_symbian_unregister_pixmap(QS60PixmapData *pd);
-void qt_symbian_release_pixmaps();
-
 class QSymbianFbsHeapLock
 {
 public:
@@ -128,9 +123,9 @@ private:
     QS60PixmapData *next;
     QS60PixmapData *prev;
 
-    friend void qt_symbian_register_pixmap(QS60PixmapData *pd);
-    friend void qt_symbian_unregister_pixmap(QS60PixmapData *pd);
-    friend void qt_symbian_release_pixmaps();
+    static void qt_symbian_register_pixmap(QS60PixmapData *pd);
+    static void qt_symbian_unregister_pixmap(QS60PixmapData *pd);
+    static void qt_symbian_release_pixmaps();
 
     friend class QPixmap;
     friend class QS60WindowSurface;
diff --git a/src/gui/kernel/qapplication.cpp b/src/gui/kernel/qapplication.cpp
index 3d3a749..82dd83a 100644
--- a/src/gui/kernel/qapplication.cpp
+++ b/src/gui/kernel/qapplication.cpp
@@ -809,6 +809,12 @@ void QApplicationPrivate::construct(
         if (testLib.load()) {
             typedef void (*TasInitialize)(void);
             TasInitialize initFunction = (TasInitialize)testLib.resolve("qt_testability_init");
+#ifdef Q_OS_SYMBIAN
+            // resolving method by name does not work on Symbian OS so need to use ordinal
+            if(!initFunction) {
+                initFunction = (TasInitialize)testLib.resolve("1");            
+            }
+#endif
             if (initFunction) {
                 initFunction();
             } else {
diff --git a/src/gui/kernel/qapplication_x11.cpp b/src/gui/kernel/qapplication_x11.cpp
index e4d9848..7495f6d 100644
--- a/src/gui/kernel/qapplication_x11.cpp
+++ b/src/gui/kernel/qapplication_x11.cpp
@@ -3642,6 +3642,11 @@ int QApplication::x11ProcessEvent(XEvent* event)
 
     case MapNotify:                                // window shown
         if (widget->isWindow()) {
+            // if we got a MapNotify when we were not waiting for it, it most
+            // likely means the user has already asked to hide the window before
+            // it ever being shown, so we try to withdraw a window after sending
+            // the QShowEvent.
+            bool pendingHide = widget->testAttribute(Qt::WA_WState_ExplicitShowHide) && widget->testAttribute(Qt::WA_WState_Hidden);
             widget->d_func()->topData()->waitingForMapNotify = 0;
 
             if (widget->windowType() != Qt::Popup) {
@@ -3661,6 +3666,8 @@ int QApplication::x11ProcessEvent(XEvent* event)
                     widget->setAttribute(Qt::WA_WState_Visible, true);
                 }
             }
+            if (pendingHide) // hide the window
+                XWithdrawWindow(X11->display, widget->internalWinId(), widget->x11Info().screen());
         }
         break;
 
diff --git a/src/gui/kernel/qgesturemanager.cpp b/src/gui/kernel/qgesturemanager.cpp
index cb4061e..5c80340 100644
--- a/src/gui/kernel/qgesturemanager.cpp
+++ b/src/gui/kernel/qgesturemanager.cpp
@@ -162,7 +162,7 @@ void QGestureManager::cleanupCachedGestures(QObject *target, Qt::GestureType typ
     QMap<ObjectGesture, QList<QGesture *> >::Iterator iter = m_objectGestures.begin();
     while (iter != m_objectGestures.end()) {
         ObjectGesture objectGesture = iter.key();
-        if (objectGesture.gesture == type && target == objectGesture.object.data()) {
+        if (objectGesture.gesture == type && target == objectGesture.object) {
             QSet<QGesture *> gestures = iter.value().toSet();
             for (QHash<QGestureRecognizer *, QSet<QGesture *> >::iterator
                  it = m_obsoleteGestures.begin(), e = m_obsoleteGestures.end(); it != e; ++it) {
@@ -172,6 +172,7 @@ void QGestureManager::cleanupCachedGestures(QObject *target, Qt::GestureType typ
                 m_deletedRecognizers.remove(g);
                 m_gestureToRecognizer.remove(g);
             }
+
             qDeleteAll(gestures);
             iter = m_objectGestures.erase(iter);
         } else {
diff --git a/src/gui/kernel/qgesturemanager_p.h b/src/gui/kernel/qgesturemanager_p.h
index 747cb1a..0d84b67 100644
--- a/src/gui/kernel/qgesturemanager_p.h
+++ b/src/gui/kernel/qgesturemanager_p.h
@@ -106,13 +106,13 @@ private:
 
     struct ObjectGesture
     {
-        QWeakPointer<QObject> object;
+        QObject* object;
         Qt::GestureType gesture;
 
         ObjectGesture(QObject *o, const Qt::GestureType &g) : object(o), gesture(g) { }
         inline bool operator<(const ObjectGesture &rhs) const
         {
-            if (object.data() < rhs.object.data())
+            if (object < rhs.object)
                 return true;
             if (object == rhs.object)
                 return gesture < rhs.gesture;
diff --git a/src/imports/folderlistmodel/qdeclarativefolderlistmodel.cpp b/src/imports/folderlistmodel/qdeclarativefolderlistmodel.cpp
index 6c38911..4983840 100644
--- a/src/imports/folderlistmodel/qdeclarativefolderlistmodel.cpp
+++ b/src/imports/folderlistmodel/qdeclarativefolderlistmodel.cpp
@@ -95,30 +95,61 @@ public:
 /*!
     \qmlclass FolderListModel QDeclarativeFolderListModel
     \ingroup qml-working-with-data
-    \brief The FolderListModel provides a model of the contents of a folder in a filesystem.
+    \brief The FolderListModel provides a model of the contents of a file system folder.
 
-    FolderListModel provides access to the local filesystem.  The \e folder property
-    specifies the folder to list.
+    FolderListModel provides access to information about the contents of a folder
+    in the local file system, exposing a list of files to views and other data components.
 
-    Qt uses "/" as a universal directory separator in the same way that "/" is
-    used as a path separator in URLs. If you always use "/" as a directory
-    separator, Qt will translate your paths to conform to the underlying
-    operating system.
-
-    This type is made available by importing the \c Qt.labs.folderlistmodel module.
-    \e {Elements in the Qt.labs module are not guaranteed to remain compatible
+    \note This type is made available by importing the \c Qt.labs.folderlistmodel module.
+    \e{Elements in the Qt.labs module are not guaranteed to remain compatible
     in future versions.}
 
     \bold{import Qt.labs.folderlistmodel 1.0}
 
-    The roles available are:
+    The \l folder property specifies the folder to access. Information about the
+    files and directories in the folder is supplied via the model's interface.
+    Components access names and paths via the following roles:
+
     \list
     \o fileName
     \o filePath
     \endlist
 
-    Additionally a file entry can be differentiated from a folder entry
-    via the \l isFolder() method.
+    Additionally a file entry can be differentiated from a folder entry via the
+    isFolder() method.
+
+    \section1 Filtering
+
+    Various properties can be set to filter the number of files and directories
+    exposed by the model.
+
+    The \l nameFilters property can be set to contain a list of wildcard filters
+    that are applied to names of files and directories, causing only those that
+    match the filters to be exposed.
+
+    Directories can be included or excluded using the \l showDirs property, and
+    navigation directories can also be excluded by setting the \l showDotAndDotDot
+    property to false.
+
+    It is sometimes useful to limit the files and directories exposed to those
+    that the user can access. The \l showOnlyReadable property can be set to
+    enable this feature.
+
+    \section1 Example Usage
+
+    The following example shows a FolderListModel being used to provide a list
+    of QML files in a \l ListView:
+
+    \snippet doc/src/snippets/declarative/folderlistmodel.qml 0
+
+    \section1 Path Separators
+
+    Qt uses "/" as a universal directory separator in the same way that "/" is
+    used as a path separator in URLs. If you always use "/" as a directory
+    separator, Qt will translate your paths to conform to the underlying
+    operating system.
+
+    \sa {QML Data Models}
 */
 
 QDeclarativeFolderListModel::QDeclarativeFolderListModel(QObject *parent)
@@ -168,9 +199,13 @@ int QDeclarativeFolderListModel::rowCount(const QModelIndex &parent) const
 /*!
     \qmlproperty string FolderListModel::folder
 
-    The \a folder property holds the folder the model is currently providing.
+    The \a folder property holds a URL for the folder that the model is
+    currently providing.
 
-    It is a URL, but must be a file: or qrc: URL (or relative to such a URL).
+    The value is a URL expressed as a string, and must be a \c file: or \c qrc:
+    URL, or a relative URL.
+
+    By default, the value is an invalid URL.
 */
 QUrl QDeclarativeFolderListModel::folder() const
 {
@@ -214,16 +249,18 @@ QUrl QDeclarativeFolderListModel::parentFolder() const
 /*!
     \qmlproperty list<string> FolderListModel::nameFilters
 
-    The \a nameFilters property contains a list of filename filters.
+    The \a nameFilters property contains a list of file name filters.
     The filters may include the ? and * wildcards.
 
     The example below filters on PNG and JPEG files:
 
-    \code
+    \qml
     FolderListModel {
         nameFilters: [ "*.png", "*.jpg" ]
     }
-    \endcode
+    \endqml
+
+    \note Directories are not excluded by filters.
 */
 QStringList QDeclarativeFolderListModel::nameFilters() const
 {
@@ -335,9 +372,14 @@ void QDeclarativeFolderListModel::dataChanged(const QModelIndex &start, const QM
 /*!
     \qmlproperty bool FolderListModel::showDirs
 
-    If true (the default), directories are included in the model.
+    If true, directories are included in the model; otherwise only files
+    are included.
+
+    By default, this property is true.
 
-    Note that the nameFilters are ignored for directories.
+    Note that the nameFilters are not applied to directories.
+
+    \sa showDotAndDotDot
 */
 bool QDeclarativeFolderListModel::showDirs() const
 {
@@ -357,9 +399,12 @@ void  QDeclarativeFolderListModel::setShowDirs(bool on)
 /*!
     \qmlproperty bool FolderListModel::showDotAndDotDot
 
-    If true, the "." and ".." directories are included in the model.
+    If true, the "." and ".." directories are included in the model; otherwise
+    they are excluded.
+
+    By default, this property is false.
 
-    The default is false.
+    \sa showDirs
 */
 bool QDeclarativeFolderListModel::showDotAndDotDot() const
 {
@@ -379,9 +424,12 @@ void  QDeclarativeFolderListModel::setShowDotAndDotDot(bool on)
 /*!
     \qmlproperty bool FolderListModel::showOnlyReadable
 
-    If true, only readable files and directories are shown.
+    If true, only readable files and directories are shown; otherwise all files
+    and directories are shown.
+
+    By default, this property is false.
 
-    The default is false.
+    \sa showDirs
 */
 bool QDeclarativeFolderListModel::showOnlyReadable() const
 {
diff --git a/src/xmlpatterns/parser/createTokenLookup.sh b/src/xmlpatterns/parser/createTokenLookup.sh
index 01af6ca..e11a3ba 100755
--- a/src/xmlpatterns/parser/createTokenLookup.sh
+++ b/src/xmlpatterns/parser/createTokenLookup.sh
@@ -71,16 +71,16 @@ license=`cat <<EOF
 ** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
 ** package.
 **
-** GNU General Public License Usage
-** Alternatively, this file may be used under the terms of the GNU
-** General Public License version 3.0 as published by the Free Software
-** Foundation and appearing in the file LICENSE.GPL included in the
-** packaging of this file.  Please review the following information to
-** ensure the GNU General Public License version 3.0 requirements will be
-** met: http://www.gnu.org/copyleft/gpl.html.
-**
 ** If you are unsure which license is appropriate for your use, please
 ** contact the sales department at http://qt.nokia.com/contact.
+**
+**
+**
+**
+**
+**
+**
+**
 ** \\$QT_END_LICENSE\\$
 **
 ****************************************************************************/