Long live Qt 4.5!

3 files changed, 1240 insertions, 0 deletions

diff --git a/tests/auto/qabstractslider/.gitignore b/tests/auto/qabstractslider/.gitignore
new file mode 100644
index 0000000..cdbb891
--- /dev/null
+++ b/tests/auto/qabstractslider/.gitignore
@@ -0,0 +1 @@
+tst_qabstractslider
diff --git a/tests/auto/qabstractslider/qabstractslider.pro b/tests/auto/qabstractslider/qabstractslider.pro
new file mode 100644
index 0000000..13a2e87
--- /dev/null
+++ b/tests/auto/qabstractslider/qabstractslider.pro
@@ -0,0 +1,4 @@
+load(qttest_p4)
+SOURCES  += tst_qabstractslider.cpp
+
+
diff --git a/tests/auto/qabstractslider/tst_qabstractslider.cpp b/tests/auto/qabstractslider/tst_qabstractslider.cpp
new file mode 100644
index 0000000..9e3acb8
--- /dev/null
+++ b/tests/auto/qabstractslider/tst_qabstractslider.cpp
@@ -0,0 +1,1235 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the test suite of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+
+#include <QtTest/QtTest>
+#include <QAbstractSlider>
+#include <QScrollBar>
+#include <QSlider>
+#include <QStyle>
+#include <QStyleOption>
+#include <QTime>
+#include <QDebug>
+
+// defined to be 120 by the wheel mouse vendors according to the docs
+#define WHEEL_DELTA 120
+
+class Slider : public QAbstractSlider
+{
+    public:
+        using QAbstractSlider::setRepeatAction;
+        using QAbstractSlider::repeatAction;
+};
+
+class tst_QAbstractSlider: public QObject
+{
+    Q_OBJECT
+public slots:
+    void initTestCase();
+    void cleanupTestCase();
+    void actionTriggered(int action);
+    void rangeChanged(int min, int max);
+    void valueChanged(int value);
+    void sliderMoved(int value);
+
+private slots:
+    void triggerAction_data();
+    void triggerAction();
+    void minimum_maximum_data();
+    void minimum_maximum();
+    void keyPressed_data();
+    void keyPressed();
+    void wheelEvent_data();
+    void wheelEvent();
+    void sliderPressedReleased_data();
+    void sliderPressedReleased();
+    void setOrientation();
+    void sliderMoved_data();
+    void sliderMoved();
+    void rangeChanged_data();
+    void rangeChanged();
+    void setSliderPosition_data();
+    void setSliderPosition();
+    void setValue_data();
+    void setValue();
+    void setRepeatAction();
+
+private:
+    void waitUntilTimeElapsed(const QTime& t, int ms);
+
+    Slider *slider;
+    int previousAction;
+    int reportedMinimum;
+    int reportedMaximum;
+    int reportedValue;
+    int reportedSliderPosition;
+    qint64 timeStamp;
+    qint64 actionTriggeredTimeStamp;
+    qint64 valueChangedTimeStamp;
+    qint64 rangeChangedTimeStamp;
+    qint64 sliderMovedTimeStamp;
+};
+
+Q_DECLARE_METATYPE(QList<Qt::Key>)
+Q_DECLARE_METATYPE(QPoint)
+
+void tst_QAbstractSlider::initTestCase()
+{
+    slider = new Slider;
+    slider->setObjectName("testWidget");
+    slider->resize(100,100);
+    slider->show();
+
+    previousAction = QAbstractSlider::SliderNoAction;
+    timeStamp = 0;
+
+    connect(slider,SIGNAL(actionTriggered(int)),this,SLOT(actionTriggered(int)));
+    connect(slider,SIGNAL(rangeChanged(int,int)),this,SLOT(rangeChanged(int,int)));
+    connect(slider,SIGNAL(valueChanged(int)),this,SLOT(valueChanged(int)));
+    connect(slider,SIGNAL(sliderMoved(int)),this,SLOT(sliderMoved(int)));
+}
+
+void tst_QAbstractSlider::cleanupTestCase()
+{
+    delete slider;
+}
+
+void tst_QAbstractSlider::actionTriggered(int action)
+{
+    previousAction = action;
+    actionTriggeredTimeStamp = timeStamp++;
+}
+
+void tst_QAbstractSlider::rangeChanged(int min,int max)
+{
+    reportedMinimum = min;
+    reportedMaximum = max;
+    rangeChangedTimeStamp = timeStamp++;
+}
+
+void tst_QAbstractSlider::valueChanged(int value)
+{
+    reportedValue = value;
+    valueChangedTimeStamp = timeStamp++;
+}
+
+void tst_QAbstractSlider::sliderMoved(int value)
+{
+    reportedSliderPosition = value;
+    sliderMovedTimeStamp = timeStamp++;
+}
+
+void tst_QAbstractSlider::triggerAction_data()
+{
+    QTest::addColumn<int>("sliderAction");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("initialSliderPosition");
+    QTest::addColumn<int>("singleStep");
+    QTest::addColumn<int>("pageStep");
+    QTest::addColumn<int>("expectedSliderPosition");
+
+    QTest::newRow("No action") << int(QAbstractSlider::SliderNoAction) // sliderAction
+                            << 1000                                 // max
+                            << 900                                  // min
+                            << 987                                  // initial position
+                            << 237                                  // single step size
+                            << 234                                  // page step size
+                            << 987;                                 // expected position after
+
+    QTest::newRow("Move action") << int(QAbstractSlider::SliderMove) // sliderAction
+                              << 1000                                 // max
+                              << 900                                  // min
+                              << 988                                  // initial position
+                              << 237                                  // single step size
+                              << 234                                  // page step size
+                              << 988;                                 // expected position after
+
+    QTest::newRow("Empty step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction
+                                 << 1000                                      // max
+                                 << 900                                       // min
+                                 << 988                                       // initial position
+                                 << 0                                         // single step size
+                                 << 234                                       // page step size
+                                 << 988;                                      // expected position after
+
+     QTest::newRow("Empty step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction
+                                 << 1000                                       // max
+                                 << 900                                        // min
+                                 << 987                                        // initial position
+                                 << 0                                          // single step size
+                                 << 234                                        // page step size
+                                 << 987;                                       // expected position after
+
+    QTest::newRow("Empty page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction
+                                 << 1000                                    // max
+                                 << 900                                     // min
+                                 << 988                                     // initial position
+                                 << 234                                     // single step size
+                                 << 0                                       // page step size
+                                 << 988;                                    // expected position after
+
+     QTest::newRow("Empty page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction
+                                 << 1000                                     // max
+                                 << 900                                      // min
+                                 << 987                                      // initial position
+                                 << 234                                      // single step size
+                                 << 0                                        // page step size
+                                 << 987;                                     // expected position after
+
+    QTest::newRow("Legal step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction
+                                 << 1000                                      // max
+                                 << 900                                       // min
+                                 << 988                                       // initial position
+                                 << 5                                         // single step size
+                                 << 234                                       // page step size
+                                 << 993;                                      // expected position after
+
+     QTest::newRow("Legal step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction
+                                 << 1000                                       // max
+                                 << 900                                        // min
+                                 << 987                                        // initial position
+                                 << 5                                          // single step size
+                                 << 234                                        // page step size
+                                 << 982;                                       // expected position after
+
+    QTest::newRow("Legal page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction
+                                 << 1000                                    // max
+                                 << 900                                     // min
+                                 << 988                                     // initial position
+                                 << 234                                     // single step size
+                                 << 5                                       // page step size
+                                 << 993;                                    // expected position after
+
+     QTest::newRow("Legal page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction
+                                 << 1000                                     // max
+                                 << 900                                      // min
+                                 << 987                                      // initial position
+                                 << 234                                      // single step size
+                                 << 5                                        // page step size
+                                 << 982;                                     // expected position after
+
+    QTest::newRow("Illegal step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction
+                                   << 1000                                      // max
+                                   << 900                                       // min
+                                   << 988                                       // initial position
+                                   << 500                                       // single step size
+                                   << 234                                       // page step size
+                                   << 1000;                                     // expected position after
+
+     QTest::newRow("Illegal step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction
+                                    << 1000                                      // max
+                                    << 900                                       // min
+                                    << 987                                       // initial position
+                                    << 500                                       // single step size
+                                    << 234                                       // page step size
+                                    << 900;                                      // expected position after
+
+    QTest::newRow("Illegal page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction
+                                   << 1000                                    // max
+                                   << 900                                     // min
+                                   << 988                                     // initial position
+                                   << 234                                     // single step size
+                                   << 500                                     // page step size
+                                   << 1000;                                   // expected position after
+
+     QTest::newRow("Illegal page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction
+                                    << 1000                                    // max
+                                    << 900                                     // min
+                                    << 987                                     // initial position
+                                    << 234                                     // single step size
+                                    << 500                                     // page step size
+                                    << 900;                                    // expected position after
+
+    // Negative steps will also be abs()'d so, check that case.
+    QTest::newRow("Negative step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction
+                                    << 1000                                      // max
+                                    << 900                                       // min
+                                    << 988                                       // initial position
+                                    << -1                                        // single step size
+                                    << 234                                       // page step size
+                                    << 989;                                      // expected position after
+
+     QTest::newRow("Negative step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction
+                                     << 1000                                      // max
+                                     << 900                                       // min
+                                     << 987                                       // initial position
+                                     << -1                                        // single step size
+                                     << 234                                       // page step size
+                                     << 986;                                      // expected position after
+
+    QTest::newRow("Negative page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction
+                                    << 1000                                    // max
+                                    << 900                                     // min
+                                    << 988                                     // initial position
+                                    << 234                                     // single step size
+                                    << -1                                      // page step size
+                                    << 989;                                    // expected position after
+
+     QTest::newRow("Negative page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction
+                                     << 1000                                    // max
+                                     << 900                                     // min
+                                     << 987                                     // initial position
+                                     << 234                                     // single step size
+                                     << -1                                      // page step size
+                                     << 986;                                    // expected position after
+
+    QTest::newRow("Illegal negative step add") << int(QAbstractSlider::SliderSingleStepAdd) // sliderAction
+                                            << 1000                                      // max
+                                            << 900                                       // min
+                                            << 988                                       // initial position
+                                            << -500                                      // single step size
+                                            << 234                                       // page step size
+                                            << 1000;                                      // expected position after
+
+
+    QTest::newRow("Illegal negative step sub") << int(QAbstractSlider::SliderSingleStepSub) // sliderAction
+                                            << 1000                                      // max
+                                            << 900                                       // min
+                                            << 988                                       // initial position
+                                            << -500                                      // single step size
+                                            << 234                                       // page step size
+                                            << 900;                                     // expected position after
+
+    QTest::newRow("Illegal negative page add") << int(QAbstractSlider::SliderPageStepAdd) // sliderAction
+                                            << 1000                                    // max
+                                            << 900                                     // min
+                                            << 988                                     // initial position
+                                            << 234                                     // single step size
+                                            << -500                                    // page step size
+                                            << 1000;                                    // expected position after
+
+    QTest::newRow("Illegal negative page sub") << int(QAbstractSlider::SliderPageStepSub) // sliderAction
+                                            << 1000                                    // max
+                                            << 900                                     // min
+                                            << 988                                     // initial position
+                                            << 245                                     // single step size
+                                            << -500                                    // page step size
+                                            << 900;                                   // expected position after
+
+    QTest::newRow("Slider to minimum") << int(QAbstractSlider::SliderToMinimum)   // sliderAction
+                                    << 1000                                    // max
+                                    << 900                                     // min
+                                    << 988                                     // initial position
+                                    << 245                                     // single step size
+                                    << 1                                       // page step size
+                                    << 900;                                    // expected position after
+
+    QTest::newRow("Slider to maximum") << int(QAbstractSlider::SliderToMaximum)   // sliderAction
+                                    << 1000                                    // max
+                                    << 900                                     // min
+                                    << 988                                     // initial position
+                                    << 245                                     // single step size
+                                    << 1                                       // page step size
+                                    << 1000;                                   // expected position after
+
+}
+
+void tst_QAbstractSlider::triggerAction()
+{
+    QFETCH(int,sliderAction);
+    QFETCH(int,maximum);
+    QFETCH(int,minimum);
+    QFETCH(int,initialSliderPosition);
+    QFETCH(int,singleStep);
+    QFETCH(int,pageStep);
+    QFETCH(int,expectedSliderPosition);
+
+    slider->setTracking(true);
+    slider->setRange(minimum,maximum);
+    slider->setSingleStep(singleStep);
+    slider->setPageStep(pageStep);
+    QCOMPARE(slider->singleStep(), qAbs(singleStep));
+    QCOMPARE(slider->pageStep(), qAbs(pageStep));
+
+    int oldPosition = slider->sliderPosition();
+    slider->setSliderPosition(initialSliderPosition);
+
+    QVERIFY( (oldPosition == initialSliderPosition && previousAction == int(QAbstractSlider::SliderNoAction)) ||
+            (oldPosition != initialSliderPosition && previousAction == int(QAbstractSlider::SliderMove)));
+    previousAction = int(QAbstractSlider::SliderNoAction);
+
+    QAbstractSlider::SliderAction *action = reinterpret_cast<QAbstractSlider::SliderAction*>(&sliderAction);
+    QVERIFY(action != 0);
+
+    slider->triggerAction(*action);
+    QCOMPARE(previousAction,sliderAction); // previousAction set in the actionTriggered() slot
+    QCOMPARE(slider->sliderPosition(),expectedSliderPosition);
+    QCOMPARE(slider->value(),expectedSliderPosition);
+    QCOMPARE(reportedValue,expectedSliderPosition);
+    previousAction = int(QAbstractSlider::SliderNoAction);
+    if (initialSliderPosition != expectedSliderPosition)
+        QVERIFY(actionTriggeredTimeStamp < valueChangedTimeStamp);
+}
+
+void tst_QAbstractSlider::minimum_maximum_data()
+{
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<int>("expectedMinimum");
+    QTest::addColumn<int>("expectedMaximum");
+
+    QTest::newRow("Normal range") << 100 << 200 << 100 << 200;
+    QTest::newRow("Minimum higher") << 100 << 0 << 100 << 100;
+    QTest::newRow("Negative minimum") << -100 << 100 << -100 << 100;
+    QTest::newRow("Negative range") << -100 << -50 << -100 << -50;
+}
+
+void tst_QAbstractSlider::minimum_maximum()
+{
+    QFETCH(int, minimum);
+    QFETCH(int, maximum);
+    QFETCH(int, expectedMinimum);
+    QFETCH(int, expectedMaximum);
+
+    slider->setRange(minimum,maximum);
+    QCOMPARE(slider->minimum(),expectedMinimum);
+    QCOMPARE(slider->maximum(),expectedMaximum);
+    QCOMPARE(reportedMinimum,expectedMinimum);
+    QCOMPARE(reportedMaximum,expectedMaximum);
+
+    slider->setRange(minimum,maximum);
+    slider->setMaximum(slider->minimum() - 1);
+    QCOMPARE(slider->maximum(),slider->minimum());
+    QCOMPARE(reportedMinimum,slider->minimum());
+    QCOMPARE(reportedMaximum,slider->maximum());
+
+    slider->setRange(minimum,maximum);
+    slider->setMinimum(slider->maximum() + 1);
+    QCOMPARE(slider->minimum(),slider->maximum());
+    QCOMPARE(reportedMinimum,slider->minimum());
+    QCOMPARE(reportedMaximum,slider->maximum());
+
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(slider->maximum() + 1);
+    QCOMPARE(slider->sliderPosition(), slider->maximum());
+    QCOMPARE(slider->value(), slider->maximum());
+    QCOMPARE(reportedValue, slider->maximum());
+
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(slider->minimum() - 1);
+    QCOMPARE(slider->sliderPosition(), slider->minimum());
+    QCOMPARE(slider->value(), slider->minimum());
+    QCOMPARE(reportedValue, slider->minimum());
+
+    slider->setRange(minimum,maximum);
+    int oldPosition = slider->sliderPosition();
+    slider->setMaximum(oldPosition - 1);
+    QCOMPARE(slider->sliderPosition(),oldPosition - 1);
+
+    slider->setRange(minimum,maximum);
+    oldPosition = slider->sliderPosition();
+    slider->setMinimum(oldPosition + 1);
+    QCOMPARE(slider->sliderPosition(), oldPosition + 1);
+}
+
+void tst_QAbstractSlider::keyPressed_data()
+{
+    QTest::addColumn<int>("initialSliderPosition");
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<int>("stepSize");
+    QTest::addColumn<int>("pageSize");
+    QTest::addColumn<QList<Qt::Key> >("keySequence");
+    QTest::addColumn<int>("expectedSliderPositionHorizontal");
+    QTest::addColumn<int>("expectedSliderPositionVertical");
+    QTest::addColumn<int>("expectedSliderPositionHorizontalInverted"); // :)
+    QTest::addColumn<int>("expectedSliderPositionVerticalInverted");
+
+
+    QList<Qt::Key> list;
+
+    list << Qt::Key_Down;
+    QTest::newRow("Step down once") << 10   // initial position
+                                 << 0    // minimum
+                                 << 100  // maximum
+                                 << 3    // single step size
+                                 << 0    // page step size
+                                 << list // key sequence
+                                 << 7   // result in case of horizontal slider
+                                 << 7    // result in case of vertical slider
+                                 << 13   // result in case of inverted horiz. slider
+                                 << 13;   // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_Up;
+    QTest::newRow("Step down once") << 10   // initial position
+                                 << 0    // minimum
+                                 << 100  // maximum
+                                 << 3    // single step size
+                                 << 0    // page step size
+                                 << list // key sequence
+                                 << 13   // result in case of horizontal slider
+                                 << 13    // result in case of vertical slider
+                                 << 7   // result in case of inverted horiz. slider
+                                 << 7;   // result in case of inverted vertical slider
+
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_Left;
+    QTest::newRow("Step left once") << 10   // initial position
+                                 << 0    // minimum
+                                 << 100  // maximum
+                                 << 3    // single step size
+                                 << 0    // page step size
+                                 << list // key sequence
+                                 << 7    // result in case of horizontal slider
+                                 << 7   // result in case of vertical slider
+                                 << 13   // result in case of inverted horiz. slider
+                                 << 13;   // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_Right;
+    QTest::newRow("Step right once") << 10   // initial position
+                                  << 0    // minimum
+                                  << 100  // maximum
+                                  << 3    // single step size
+                                  << 0    // page step size
+                                  << list // key sequence
+                                  << 13   // result in case of horizontal slider
+                                  << 13   // result in case of vertical slider
+                                  << 7    // result in case of inverted horiz. slider
+                                  << 7;  // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_PageDown;
+    QTest::newRow("Page down once")  << 10   // initial position
+                                  << 0    // minimum
+                                  << 100  // maximum
+                                  << 0    // single step size
+                                  << 3    // page step size
+                                  << list // key sequence
+                                  << 7   // result in case of horizontal slider
+                                  << 7   // result in case of vertical slider
+                                  << 13    // result in case of inverted horiz. slider
+                                  << 13;  // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_PageUp;
+    QTest::newRow("Page up once")    << 10   // initial position
+                                  << 0    // minimum
+                                  << 100  // maximum
+                                  << 0    // single step size
+                                  << 3    // page step size
+                                  << list // key sequence
+                                  << 13   // result in case of horizontal slider
+                                  << 13   // result in case of vertical slider
+                                  << 7    // result in case of inverted horiz. slider
+                                  << 7;  // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_Up << Qt::Key_Up << Qt::Key_PageDown << Qt::Key_PageDown  << Qt::Key_Left << Qt::Key_Left
+         << Qt::Key_Right << Qt::Key_Down << Qt::Key_PageUp << Qt::Key_PageUp << Qt::Key_Down << Qt::Key_Right;
+    QTest::newRow("Symmetric seq")  << 50   // initial position
+                                 << 0    // minimum
+                                 << 100  // maximum
+                                 << 3    // single step size
+                                 << 3    // page step size
+                                 << list // key sequence
+                                 << 50   // result in case of horizontal slider
+                                 << 50    // result in case of vertical slider
+                                 << 50   // result in case of inverted horiz. slider
+                                 << 50;  // result in case of inverted vertical slider
+
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_Home;
+    QTest::newRow("Home")    << 10   // initial position
+                          << 0    // minimum
+                          << 100  // maximum
+                          << 0    // single step size
+                          << 3    // page step size
+                          << list // key sequence
+                          << 0   // result in case of horizontal slider
+                          << 0   // result in case of vertical slider
+                          << 0    // result in case of inverted horiz. slider
+                          << 0;  // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_End;
+    QTest::newRow("End")    << 10   // initial position
+                          << 0    // minimum
+                          << 100  // maximum
+                          << 0    // single step size
+                          << 3    // page step size
+                          << list // key sequence
+                          << 100   // result in case of horizontal slider
+                          << 100   // result in case of vertical slider
+                          << 100    // result in case of inverted horiz. slider
+                          << 100;  // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_End << Qt::Key_Up;
+    QTest::newRow("Past end")<< 10   // initial position
+                          << 0    // minimum
+                          << 100  // maximum
+                          << 3    // single step size
+                          << 3    // page step size
+                          << list // key sequence
+                          << 100   // result in case of horizontal slider
+                          << 100   // result in case of vertical slider
+                          << 97    // result in case of inverted horiz. slider
+                          << 97;  // result in case of inverted vertical slider
+
+    list = QList<Qt::Key>();
+    list << Qt::Key_Home << Qt::Key_Down;
+    QTest::newRow("Past home")<< 10   // initial position
+                           << 0    // minimum
+                           << 100  // maximum
+                           << 3    // single step size
+                           << 3    // page step size
+                           << list // key sequence
+                           << 0    // result in case of horizontal slider
+                           << 0    // result in case of vertical slider
+                           << 3    // result in case of inverted horiz. slider
+                           << 3;  // result in case of inverted vertical slider
+
+}
+
+void tst_QAbstractSlider::keyPressed()
+{
+    QFETCH(int, initialSliderPosition);
+    QFETCH(int, minimum);
+    QFETCH(int, maximum);
+    QFETCH(int, stepSize);
+    QFETCH(int, pageSize);
+    QFETCH(QList<Qt::Key>, keySequence);
+    QFETCH(int, expectedSliderPositionHorizontal);
+    QFETCH(int, expectedSliderPositionVertical);
+    QFETCH(int, expectedSliderPositionHorizontalInverted);
+    QFETCH(int, expectedSliderPositionVerticalInverted);
+
+    // Horizontal non-inverted
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(initialSliderPosition);
+    slider->setSingleStep(stepSize);
+    slider->setPageStep(pageSize);
+    slider->setOrientation(Qt::Horizontal);
+    slider->setInvertedAppearance(false);
+    slider->setInvertedControls(false);
+    for (int i=0;i<keySequence.count();i++) {
+        QTest::keyClick(slider, keySequence.at(i));
+    }
+    QCOMPARE(slider->sliderPosition(), expectedSliderPositionHorizontal);
+
+    // Horizontal inverted
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(initialSliderPosition);
+    slider->setSingleStep(stepSize);
+    slider->setPageStep(pageSize);
+    slider->setOrientation(Qt::Horizontal);
+    slider->setInvertedAppearance(true);
+    slider->setInvertedControls(true);
+    for (int i=0;i<keySequence.count();i++)
+        QTest::keyPress(slider, keySequence.at(i));
+    QCOMPARE(slider->sliderPosition(), expectedSliderPositionHorizontalInverted);
+
+    // Vertical non-inverted
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(initialSliderPosition);
+    slider->setSingleStep(stepSize);
+    slider->setPageStep(pageSize);
+    slider->setOrientation(Qt::Vertical);
+    slider->setInvertedAppearance(false);
+    slider->setInvertedControls(false);
+    for (int i=0;i<keySequence.count();i++)
+        QTest::keyPress(slider, keySequence.at(i));
+    QCOMPARE(slider->sliderPosition(), expectedSliderPositionVertical);
+
+    // Vertical inverted
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(initialSliderPosition);
+    slider->setSingleStep(stepSize);
+    slider->setPageStep(pageSize);
+    slider->setOrientation(Qt::Vertical);
+    slider->setInvertedAppearance(true);
+    slider->setInvertedControls(true);
+    for (int i=0;i<keySequence.count();i++)
+        QTest::keyPress(slider, keySequence.at(i));
+    QCOMPARE(slider->sliderPosition(), expectedSliderPositionVerticalInverted);
+}
+
+void tst_QAbstractSlider::wheelEvent_data()
+{
+    QTest::addColumn<int>("initialSliderPosition");
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<int>("singleStep");
+    QTest::addColumn<int>("pageStep");
+    QTest::addColumn<bool>("invertedControls");
+    QTest::addColumn<int>("wheelScrollLines");
+    QTest::addColumn<bool>("withModifiers"); // use keyboard modifiers while scrolling? (CTRL and SHIFT)
+    QTest::addColumn<int>("deltaMultiple"); // multiples of WHEEL_DELTA
+    QTest::addColumn<int>("sliderOrientation");
+    QTest::addColumn<int>("wheelOrientation");
+    QTest::addColumn<int>("expectedSliderPosition");
+    QTest::addColumn<QPoint>("distanceFromBottomRight"); // mpointer's distance from bottom-right corner of widget
+
+    QTest::newRow("Normal data step") << 0                                  // initial position
+                                   << 0                                  // minimum
+                                   << 100                                // maximum
+                                   << 1                                  // single step
+                                   << 100                                // page step
+                                   << false                              // inverted controls
+                                   << 20                                 // wheel scroll lines
+                                   << false                              // with modifiers
+                                   << 1                                  // delta
+                                   << int(Qt::Vertical)                  // orientation of slider
+                                   << int(Qt::Vertical)                  // orientation of wheel
+                                   << 20                                 // expected position after
+                                   << QPoint(0,0);
+
+    QTest::newRow("Normal data page") << 0                                  // initial position
+                                   << 0                                  // minimum
+                                   << 100                                // maximum
+                                   << 100                                // single step
+                                   << 1                                  // page step
+                                   << false                              // inverted controls
+                                   << 20                                 // wheel scroll lines
+                                   << false                              // with modifiers
+                                   << 1                                  // delta
+                                   << int(Qt::Vertical)                  // orientation of slider
+                                   << int(Qt::Vertical)                  // orientation of wheel
+                                   << 1                                  // expected position after
+                                   << QPoint(1,1);
+
+    QTest::newRow("Different orientation") << 0                             // initial position
+                                        << 0                             // minimum
+                                        << 100                           // maximum
+                                        << 100                           // single step
+                                        << 1                             // page step
+                                        << false                         // inverted controls
+                                        << 20                            // wheel scroll lines
+                                        << false                         // with modifiers
+                                        << 1                             // delta
+                                        << int(Qt::Horizontal)           // orientation of slider
+                                        << int(Qt::Vertical)             // orientation of wheel
+                                        << 0                             // expected position after
+                                        << QPoint(1,1);
+
+    // Scrolling in a slider of a different orientation than the wheel works
+    // if the mouse pointer is within the widget's rect
+    QTest::newRow("Different orientation2")<< 0                             // initial position
+                                        << 0                             // minimum
+                                        << 100                           // maximum
+                                        << 100                           // single step
+                                        << 1                             // page step
+                                        << false                         // inverted controls
+                                        << 20                            // wheel scroll lines
+                                        << false                         // with modifiers
+                                        << 1                             // delta
+                                        << int(Qt::Horizontal)           // orientation of slider
+                                        << int(Qt::Vertical)             // orientation of wheel
+                                        << 1                             // expected position after
+                                        << QPoint(0,0);
+
+
+    QTest::newRow("Inverted controls")     << 50                            // initial position
+                                        << 0                             // minimum
+                                        << 100                           // maximum
+                                        << 1                             // single step
+                                        << 100                           // page step
+                                        << true                          // inverted controls
+                                        << 20                            // wheel scroll lines
+                                        << false                         // with modifiers
+                                        << 1                             // delta
+                                        << int(Qt::Horizontal)           // orientation of slider
+                                        << int(Qt::Horizontal)           // orientation of wheel
+                                        << 30                            // expected position after
+                                        << QPoint(1,1);
+
+    QTest::newRow("Past end")              << 50                            // initial position
+                                        << 0                             // minimum
+                                        << 100                           // maximum
+                                        << 26                            // single step
+                                        << 100                           // page step
+                                        << false                         // inverted controls
+                                        << 1                             // wheel scroll lines
+                                        << false                         // with modifiers
+                                        << 2                             // delta
+                                        << int(Qt::Horizontal)           // orientation of slider
+                                        << int(Qt::Horizontal)           // orientation of wheel
+                                        << 100                           // expected position after
+                                        << QPoint(0,0);
+
+    QTest::newRow("Past start")            << 50                            // initial position
+                                        << 0                             // minimum
+                                        << 100                           // maximum
+                                        << 26                            // single step
+                                        << 100                           // page step
+                                        << false                         // inverted controls
+                                        << 1                             // wheel scroll lines
+                                        << false                         // with modifiers
+                                        << -2                            // delta
+                                        << int(Qt::Horizontal)           // orientation of slider
+                                        << int(Qt::Horizontal)           // orientation of wheel
+                                        << 0                             // expected position after
+                                        << QPoint(0,0);
+
+    QTest::newRow("With modifiers")        << 50                            // initial position
+                                        << 0                             // minimum
+                                        << 100                           // maximum
+                                        << 1                             // single step
+                                        << 40                            // page step
+                                        << false                         // inverted controls
+                                        << 20                            // wheel scroll lines
+                                        << true                          // with modifiers
+                                        << 1                             // delta
+                                        << int(Qt::Horizontal)           // orientation of slider
+                                        << int(Qt::Horizontal)           // orientation of wheel
+                                        << 90                            // expected position after
+                                        << QPoint(0,0);
+
+}
+
+void tst_QAbstractSlider::wheelEvent()
+{
+    QFETCH(int,initialSliderPosition);
+    QFETCH(int,minimum);
+    QFETCH(int,maximum);
+    QFETCH(int,singleStep);
+    QFETCH(int,pageStep);
+    QFETCH(bool,invertedControls);
+    QFETCH(int,wheelScrollLines);
+    QFETCH(bool,withModifiers);
+    QFETCH(int,deltaMultiple);
+    QFETCH(int,sliderOrientation);
+    QFETCH(int,wheelOrientation);
+    QFETCH(int,expectedSliderPosition);
+    QFETCH(QPoint,distanceFromBottomRight);
+
+    QCoreApplication *applicationInstance = QCoreApplication::instance();
+    QVERIFY(applicationInstance != 0);
+    QApplication::setWheelScrollLines(wheelScrollLines);
+
+    Qt::Orientation orientation = *reinterpret_cast<Qt::Orientation*>(&sliderOrientation);
+    slider->setRange(minimum,maximum);
+    slider->setSliderPosition(initialSliderPosition);
+    slider->setSingleStep(singleStep);
+    slider->setPageStep(pageStep);
+    slider->setInvertedControls(invertedControls);
+    slider->setOrientation(orientation);
+
+    Qt::KeyboardModifier k = withModifiers ? Qt::ControlModifier : Qt::NoModifier;
+    orientation = *reinterpret_cast<Qt::Orientation*>(&wheelOrientation);
+    QWheelEvent event(slider->rect().bottomRight() + distanceFromBottomRight, WHEEL_DELTA * deltaMultiple,
+                      Qt::NoButton, k, orientation);
+    QVERIFY(applicationInstance->sendEvent(slider,&event));
+    QCOMPARE(slider->sliderPosition(),expectedSliderPosition);
+
+    slider->setSliderPosition(initialSliderPosition);
+    k = withModifiers ? Qt::ShiftModifier : Qt::NoModifier;
+    event = QWheelEvent(slider->rect().bottomRight() + distanceFromBottomRight, WHEEL_DELTA * deltaMultiple,
+                      Qt::NoButton, k, orientation);
+    QSignalSpy spy1(slider, SIGNAL(actionTriggered(int)));
+    QSignalSpy spy2(slider, SIGNAL(valueChanged(int)));
+    QVERIFY(applicationInstance->sendEvent(slider,&event));
+    QCOMPARE(slider->sliderPosition(),expectedSliderPosition);
+    int expectedSignalCount = (initialSliderPosition == expectedSliderPosition) ? 0 : 1;
+#if QT_VERSION >= 0x040200
+    QCOMPARE(spy1.count(), expectedSignalCount);
+#else
+    QCOMPARE(spy1.count(), 0);
+#endif
+    QCOMPARE(spy2.count(), expectedSignalCount);
+    if (expectedSignalCount)
+        QVERIFY(actionTriggeredTimeStamp < valueChangedTimeStamp);
+}
+
+void tst_QAbstractSlider::sliderPressedReleased_data()
+{
+    QTest::addColumn<int>("control");
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<uint>("subControl");
+    QTest::addColumn<int>("expectedCount");
+
+    QTest::newRow("slider on the handle") << int(QStyle::CC_Slider)
+                               << 0
+                               << 20
+                               << uint(QStyle::SC_SliderHandle)
+                               << 1;
+
+    QTest::newRow("slider on the groove") << int(QStyle::CC_Slider)
+                               << 0
+                               << 20
+                               << uint(QStyle::SC_SliderGroove)
+                               << ((qApp->style()->styleHint(QStyle::SH_Slider_AbsoluteSetButtons) & Qt::LeftButton) ? 1 : 0);
+
+    QTest::newRow("scrollbar on the handle") << int(QStyle::CC_ScrollBar)
+                               << 0
+                               << 20
+                               << uint(QStyle::SC_ScrollBarSlider)
+                               << 1;
+
+    QTest::newRow("scrollbar on the groove") << int(QStyle::CC_ScrollBar)
+                               << 0
+                               << 20
+                               << uint(QStyle::SC_ScrollBarGroove)
+                               << 0;
+}
+
+void tst_QAbstractSlider::sliderPressedReleased()
+{
+    QFETCH(int, control);
+    QFETCH(int, minimum);
+    QFETCH(int, maximum);
+    QFETCH(uint, subControl);
+    QFETCH(int, expectedCount);
+
+    QAbstractSlider *slider;
+    switch (control) {
+    default:
+        qWarning("Bad input into test, leaving");
+        return;
+        break;
+    case QStyle::CC_Slider:
+        slider = new QSlider;
+        slider->setLayoutDirection(Qt::LeftToRight);   // Makes "upside down" much easier to compute
+        break;
+    case QStyle::CC_ScrollBar:
+        slider = new QScrollBar;
+        break;
+    }
+
+
+    slider->setMinimum(minimum);
+    slider->setMaximum(maximum);
+    slider->setValue(0);
+    slider->setOrientation(Qt::Vertical);
+    slider->resize(slider->sizeHint().width(), slider->sizeHint().height() + 100);
+    QSignalSpy spy1(slider, SIGNAL(sliderPressed()));
+    QSignalSpy spy2(slider, SIGNAL(sliderReleased()));
+
+    // Mac Style requires the control to be active to get the correct values...
+    slider->show();
+    slider->activateWindow();
+
+    QStyleOptionSlider option;
+    option.init(slider);
+    option.upsideDown = control == QStyle::CC_Slider ? !slider->invertedAppearance()
+                                                     : slider->invertedAppearance();
+    option.subControls = QStyle::SC_None;
+    option.activeSubControls = QStyle::SC_None;
+    option.orientation = slider->orientation();
+    option.maximum = maximum;
+    option.minimum = minimum;
+    option.sliderPosition = slider->value();
+    option.sliderValue = slider->value();
+    option.singleStep = slider->singleStep();
+    option.pageStep = slider->pageStep();
+    QRect rect = slider->style()->subControlRect(QStyle::ComplexControl(control), &option,
+                                                 QStyle::SubControl(subControl), slider);
+
+    QTest::mousePress(slider, Qt::LeftButton, 0, QPoint(rect.center().x() + 2, rect.center().y() + 2));
+    QCOMPARE(spy1.count(), expectedCount);
+    QTest::mouseRelease(slider, Qt::LeftButton, 0, rect.center());
+    QCOMPARE(spy2.count(), expectedCount);
+
+    delete slider;
+}
+
+void tst_QAbstractSlider::sliderMoved_data()
+{
+    QTest::addColumn<int>("control");
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<int>("position");
+    QTest::addColumn<bool>("sliderDown");
+    QTest::addColumn<int>("expectedCount");
+
+    QTest::newRow("slider pressed") << int(QStyle::CC_Slider)
+                               << 0
+                               << 20
+                               << 10
+                               << true
+                               << 1;
+
+    QTest::newRow("slider not pressed") << int(QStyle::CC_Slider)
+                               << 0
+                               << 20
+                               << 10
+                               << false
+                               << 0;
+
+    QTest::newRow("scrollbar pressed") << int(QStyle::CC_ScrollBar)
+                               << 0
+                               << 20
+                               << 10
+                               << true
+                               << 1;
+
+    QTest::newRow("scrollbar not pressed") << int(QStyle::CC_ScrollBar)
+                               << 0
+                               << 20
+                               << 10
+                               << false
+                               << 0;
+}
+
+void tst_QAbstractSlider::sliderMoved()
+{
+    QFETCH(int, control);
+    QFETCH(int, minimum);
+    QFETCH(int, maximum);
+    QFETCH(int, position);
+    QFETCH(bool, sliderDown);
+    QFETCH(int, expectedCount);
+    QAbstractSlider *slider;
+    switch (control) {
+    default:
+        slider = 0;
+        break;
+    case QStyle::CC_Slider:
+        slider = new QSlider;
+        break;
+    case QStyle::CC_ScrollBar:
+        slider = new QScrollBar;
+        break;
+    }
+    QSignalSpy spy(slider, SIGNAL(sliderMoved(int)));
+
+    slider->setMinimum(minimum);
+    slider->setMaximum(maximum);
+    slider->setSliderDown(sliderDown);
+    slider->setSliderPosition(position);
+    QCOMPARE(spy.count(), expectedCount);
+
+    delete slider;
+}
+
+void tst_QAbstractSlider::setOrientation()
+{
+    QSlider slider(0);
+
+    QSizePolicy sp = slider.sizePolicy();
+    slider.setOrientation(slider.orientation());
+    QSizePolicy sp2 = slider.sizePolicy();
+    QCOMPARE(sp, sp2);
+
+    slider.setOrientation(Qt::Horizontal);
+    sp = slider.sizePolicy();
+    slider.setOrientation(Qt::Vertical);
+    sp2 = slider.sizePolicy();
+
+    QVERIFY(sp != sp2);
+    sp2.transpose();
+    QCOMPARE(sp, sp2);
+}
+
+
+void tst_QAbstractSlider::rangeChanged_data()
+{
+    QTest::addColumn<int>("minimum");
+    QTest::addColumn<int>("maximum");
+    QTest::addColumn<int>("newMin");
+    QTest::addColumn<int>("newMax");
+    QTest::addColumn<int>("expectedCount");
+
+    QTest::newRow("no change")
+                               << 0
+                               << 20
+                               << 0
+                               << 20
+                               << 0;
+
+    QTest::newRow("min change")
+                               << 0
+                               << 20
+                               << 10
+                               << 20
+                               << 1;
+    QTest::newRow("max change")
+                               << 0
+                               << 20
+                               << 0
+                               << 30
+                               << 1;
+
+    QTest::newRow("both change")
+                               << 0
+                               << 20
+                               << 10
+                               << 30
+                               << 1;
+}
+
+void tst_QAbstractSlider::rangeChanged()
+{
+    QFETCH(int, minimum);
+    QFETCH(int, maximum);
+    QFETCH(int, newMin);
+    QFETCH(int, newMax);
+    QFETCH(int, expectedCount);
+    QSlider slider;
+    slider.setRange(minimum, maximum);
+    QSignalSpy spy(&slider, SIGNAL(rangeChanged(int, int)));
+    slider.setRange(newMin, newMax);
+    QCOMPARE(spy.count(), expectedCount);
+}
+
+void tst_QAbstractSlider::setSliderPosition_data()
+{
+    QTest::addColumn<bool>("tracking");
+    QTest::addColumn<bool>("down");
+
+    QTest::newRow("tracking, slider down")
+                               << true
+                               << true;
+    QTest::newRow("tracking, slider not down")
+                               << true
+                               << false;
+    QTest::newRow("no tracking, slider down")
+                               << false
+                               << true;
+    QTest::newRow("no tracking, slider not down")
+                               << false
+                               << false;
+}
+
+void tst_QAbstractSlider::setSliderPosition()
+{
+    QFETCH(bool, tracking);
+    QFETCH(bool, down);
+    const int minimum = 0;
+    const int maximum = 100;
+    const int initialValue = 50;
+    const int targetPosition = 75;
+    slider->setRange(minimum, maximum);
+    slider->setTracking(tracking);
+    slider->setSliderDown(down);
+    slider->setValue(initialValue);
+    QCOMPARE(slider->sliderPosition(), initialValue);
+    QSignalSpy spy1(slider, SIGNAL(sliderMoved(int)));
+    QSignalSpy spy2(slider, SIGNAL(valueChanged(int)));
+    slider->setSliderPosition(targetPosition);
+    QCOMPARE(slider->sliderPosition(), targetPosition);
+    QCOMPARE(spy1.count(), down ? 1 : 0);
+    QCOMPARE(spy2.count(), tracking ? 1 : 0);
+    QCOMPARE(slider->value(), tracking ? targetPosition : initialValue);
+    if (tracking && down)
+        QVERIFY(sliderMovedTimeStamp < valueChangedTimeStamp);
+}
+
+void tst_QAbstractSlider::setValue_data()
+{
+    QTest::addColumn<bool>("down");
+
+    QTest::newRow("slider down")
+                               << true;
+    QTest::newRow("slider not down")
+                               << false;
+}
+
+void tst_QAbstractSlider::setValue()
+{
+    QFETCH(bool, down);
+    const int minimum = 0;
+    const int maximum = 100;
+    slider->setRange(minimum, maximum);
+    slider->setSliderDown(down);
+    slider->setValue(49); // to force a valueChanged() below
+    QSignalSpy spy1(slider, SIGNAL(sliderMoved(int)));
+    QSignalSpy spy2(slider, SIGNAL(valueChanged(int)));
+    QSignalSpy spy3(slider, SIGNAL(actionTriggered(int)));
+    slider->setValue(50);
+    QCOMPARE(spy1.count(), down ? 1 : 0);
+    QCOMPARE(spy2.count(), 1);
+    QCOMPARE(spy3.count(), 0);
+    QCOMPARE(slider->value(), reportedValue);
+    QCOMPARE(slider->sliderPosition(), reportedSliderPosition);
+    if (down)
+        QVERIFY(sliderMovedTimeStamp < valueChangedTimeStamp);
+}
+
+void tst_QAbstractSlider::waitUntilTimeElapsed(const QTime& t, int ms)
+{
+    const int eps = 80;
+    while (t.elapsed() < ms + eps)
+        QTest::qWait(qMax(ms - t.elapsed() + eps, 25));
+}
+
+void tst_QAbstractSlider::setRepeatAction()
+{
+    slider->setRange(0, 1000);
+    slider->setValue(55);
+    slider->setPageStep(10);
+    QSignalSpy spy(slider, SIGNAL(actionTriggered(int)));
+
+    // Start repeat action with initial delay of 500 ms, and then repeating
+    // every 250 ms.
+    slider->setRepeatAction(QAbstractSlider::SliderPageStepAdd, 500, 250);
+    QCOMPARE(spy.count(), 0);
+    QCOMPARE(slider->value(), 55);
+
+    QTime t;
+    t.start();
+    QTest::qWait(300);
+    QCOMPARE(spy.count(), 0);
+    QCOMPARE(slider->value(), 55);
+
+    waitUntilTimeElapsed(t, 550);
+    QCOMPARE(spy.count(), 1);
+    QCOMPARE(slider->value(), 65);
+    QCOMPARE(spy.at(0).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd);
+
+    waitUntilTimeElapsed(t, 790);
+    QCOMPARE(spy.count(), 2);
+    QCOMPARE(slider->value(), 75);
+    QCOMPARE(spy.at(1).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd);
+
+    waitUntilTimeElapsed(t, 1790);
+    QCOMPARE(spy.count(), 6);
+    QCOMPARE(slider->value(), 115);
+    QCOMPARE(spy.at(4).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd);
+    QCOMPARE(spy.at(5).at(0).toUInt(), (uint)QAbstractSlider::SliderPageStepAdd);
+
+    slider->setRepeatAction(QAbstractSlider::SliderNoAction);
+    QCOMPARE(spy.count(), 6);
+    QCOMPARE(slider->value(), 115);
+
+    QTest::qWait(300);
+    QCOMPARE(spy.count(), 6);
+    QCOMPARE(slider->value(), 115);
+}
+
+QTEST_MAIN(tst_QAbstractSlider)
+#include "tst_qabstractslider.moc"