Long live Qt 4.5!

3 files changed, 413 insertions, 0 deletions

diff --git a/tests/auto/qfilesystemwatcher/.gitignore b/tests/auto/qfilesystemwatcher/.gitignore
new file mode 100644
index 0000000..19c6c08
--- /dev/null
+++ b/tests/auto/qfilesystemwatcher/.gitignore
@@ -0,0 +1 @@
+tst_qfilesystemwatcher
diff --git a/tests/auto/qfilesystemwatcher/qfilesystemwatcher.pro b/tests/auto/qfilesystemwatcher/qfilesystemwatcher.pro
new file mode 100644
index 0000000..c4d1d6f
--- /dev/null
+++ b/tests/auto/qfilesystemwatcher/qfilesystemwatcher.pro
@@ -0,0 +1,5 @@
+load(qttest_p4)
+SOURCES += tst_qfilesystemwatcher.cpp
+QT = core
+
+
diff --git a/tests/auto/qfilesystemwatcher/tst_qfilesystemwatcher.cpp b/tests/auto/qfilesystemwatcher/tst_qfilesystemwatcher.cpp
new file mode 100644
index 0000000..87f9ba3
--- /dev/null
+++ b/tests/auto/qfilesystemwatcher/tst_qfilesystemwatcher.cpp
@@ -0,0 +1,407 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the test suite of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file.  Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+#include <QtTest/QtTest>
+
+#include <QCoreApplication>
+
+#if QT_VERSION < 0x040200
+QTEST_NOOP_MAIN
+#else
+
+#include <QFileSystemWatcher>
+
+#ifdef Q_OS_LINUX
+# ifdef QT_NO_INOTIFY
+#  include <linux/version.h>
+# else
+#  include <sys/inotify.h>
+# endif
+#endif
+
+//TESTED_CLASS=
+//TESTED_FILES=
+
+class tst_QFileSystemWatcher : public QObject
+{
+    Q_OBJECT
+
+public:
+    tst_QFileSystemWatcher();
+
+private slots:
+    void basicTest_data();
+    void basicTest();
+
+    void watchDirectory_data() { basicTest_data(); }
+    void watchDirectory();
+
+    void addPath();
+    void removePath();
+    void addPaths();
+    void removePaths();
+
+private:
+    QStringList do_force_engines;
+    bool do_force_native;
+};
+
+tst_QFileSystemWatcher::tst_QFileSystemWatcher()
+    : do_force_native(false)
+{
+#ifdef Q_OS_LINUX
+    // the inotify implementation in the kernel is known to be buggy in certain versions of the linux kernel
+    do_force_engines << "native";
+    do_force_engines << "dnotify";
+
+#ifdef QT_NO_INOTIFY
+    if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,13))
+        do_force_engines << "inotify";
+#else
+    if (inotify_init() != -1)
+        do_force_engines << "inotify";
+#endif
+#elif defined(Q_OS_WIN) || defined(Q_OS_DARWIN) || defined(Q_OS_FREEBSD)
+    // we have native engines for win32, macosx and freebsd
+    do_force_engines << "native";
+#endif
+}
+
+void tst_QFileSystemWatcher::basicTest_data()
+{
+    QTest::addColumn<QString>("backend");
+    foreach(QString engine, do_force_engines)
+        QTest::newRow(engine.toLatin1().constData()) << engine;
+    QTest::newRow("poller") << "poller";
+}
+
+void tst_QFileSystemWatcher::basicTest()
+{
+    QFETCH(QString, backend);
+    qDebug() << "Testing" << backend << "engine";
+
+    // create test file
+    QFile testFile("testfile.txt");
+    testFile.setPermissions(QFile::ReadOwner | QFile::WriteOwner);
+    testFile.remove();
+    QVERIFY(testFile.open(QIODevice::WriteOnly | QIODevice::Truncate));
+    testFile.write(QByteArray("hello"));
+    testFile.close();
+
+    // set some file permissions
+    testFile.setPermissions(QFile::ReadOwner | QFile::WriteOwner);
+
+    // create watcher, forcing it to use a specific backend
+    QFileSystemWatcher watcher;
+    watcher.setObjectName(QLatin1String("_qt_autotest_force_engine_") + backend);
+    watcher.addPath(testFile.fileName());
+
+    QSignalSpy changedSpy(&watcher, SIGNAL(fileChanged(const QString &)));
+    QEventLoop eventLoop;
+    connect(&watcher,
+            SIGNAL(fileChanged(const QString &)),
+            &eventLoop,
+            SLOT(quit()));
+    QTimer timer;
+    connect(&timer, SIGNAL(timeout()), &eventLoop, SLOT(quit()));
+
+    // modify the file, should get a signal from the watcher
+
+    // resolution of the modification time is system dependent, but it's at most 1 second when using
+    // the polling engine. I've heard rumors that FAT32 has a 2 second resolution. So, we have to
+    // wait a bit before we can modify the file (hrmph)...
+#ifndef Q_OS_WINCE
+    QTest::qWait(2000);
+#else
+    // WinCE is always a little bit slower. Give it a little bit more time
+    QTest::qWait(5000);
+#endif
+
+    testFile.open(QIODevice::WriteOnly | QIODevice::Append);
+    testFile.write(QByteArray("world"));
+    testFile.close();
+
+    // qDebug() << "waiting max 5 seconds for notification for file modification to trigger(1)";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 1);
+    QCOMPARE(changedSpy.at(0).count(), 1);
+
+    QString fileName = changedSpy.at(0).at(0).toString();
+    QCOMPARE(fileName, testFile.fileName());
+
+    changedSpy.clear();
+
+    // remove the watch and modify the file, should not get a signal from the watcher
+    watcher.removePath(testFile.fileName());
+    testFile.open(QIODevice::WriteOnly | QIODevice::Truncate);
+    testFile.write(QByteArray("hello universe!"));
+    testFile.close();
+
+    // qDebug() << "waiting max 5 seconds for notification for file modification to trigger (2)";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 0);
+
+    // readd the file watch with a relative path
+    watcher.addPath(testFile.fileName().prepend("./"));
+    testFile.open(QIODevice::WriteOnly | QIODevice::Truncate);
+    testFile.write(QByteArray("hello multiverse!"));
+    testFile.close();
+
+    timer.start(5000);
+    eventLoop.exec();
+
+    QVERIFY(changedSpy.count() > 0);
+
+    watcher.removePath(testFile.fileName().prepend("./"));
+
+    changedSpy.clear();
+
+    // readd the file watch
+    watcher.addPath(testFile.fileName());
+
+    // change the permissions, should get a signal from the watcher
+    testFile.setPermissions(QFile::ReadOwner);
+
+    // qDebug() << "waiting max 5 seconds for notification for file permission modification to trigger(1)";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 1);
+    QCOMPARE(changedSpy.at(0).count(), 1);
+
+    fileName = changedSpy.at(0).at(0).toString();
+    QCOMPARE(fileName, testFile.fileName());
+
+    changedSpy.clear();
+
+    // remove the watch and modify file permissions, should not get a signal from the watcher
+    watcher.removePath(testFile.fileName());
+    testFile.setPermissions(QFile::ReadOwner | QFile::WriteOwner | QFile::ExeOther);
+
+    // qDebug() << "waiting max 5 seconds for notification for file modification to trigger (2)";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 0);
+
+    // readd the file watch
+    watcher.addPath(testFile.fileName());
+
+    // remove the file, should get a signal from the watcher
+    QVERIFY(testFile.remove());
+
+    // qDebug() << "waiting max 5 seconds for notification for file removal to trigger";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QVERIFY(changedSpy.count() == 1 || changedSpy.count() == 2); // removing a file on some filesystems seems to deliver 2 notifications
+    QCOMPARE(changedSpy.at(0).count(), 1);
+
+    fileName = changedSpy.at(0).at(0).toString();
+    QCOMPARE(fileName, testFile.fileName());
+
+    changedSpy.clear();
+
+    // recreate the file, we should not get any notification
+    QVERIFY(testFile.open(QIODevice::WriteOnly | QIODevice::Truncate));
+    testFile.write(QByteArray("hello"));
+    testFile.close();
+
+    // qDebug() << "waiting max 5 seconds for notification for file recreation to trigger";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 0);
+
+    QVERIFY(testFile.remove());
+}
+
+void tst_QFileSystemWatcher::watchDirectory()
+{
+    QFETCH(QString, backend);
+    qDebug() << "Testing" << backend << "engine";
+
+    QDir().mkdir("testDir");
+    QDir testDir("testDir");
+
+    QString testFileName = testDir.filePath("testFile.txt");
+    QFile::remove(testFileName);
+
+    QFileSystemWatcher watcher;
+    watcher.setObjectName(QLatin1String("_qt_autotest_force_engine_") + backend);
+    watcher.addPath(testDir.dirName());
+
+    QSignalSpy changedSpy(&watcher, SIGNAL(directoryChanged(const QString &)));
+    QEventLoop eventLoop;
+    connect(&watcher,
+            SIGNAL(directoryChanged(const QString &)),
+            &eventLoop,
+            SLOT(quit()));
+    QTimer timer;
+    connect(&timer, SIGNAL(timeout()), &eventLoop, SLOT(quit()));
+
+    // resolution of the modification time is system dependent, but it's at most 1 second when using
+    // the polling engine. From what I know, FAT32 has a 2 second resolution. So we have to
+    // wait before modifying the directory...
+    QTest::qWait(2000);
+    QFile testFile(testFileName);
+    QString fileName;
+
+    // remove the watch, should not get notification of a new file
+    watcher.removePath(testDir.dirName());
+    QVERIFY(testFile.open(QIODevice::WriteOnly | QIODevice::Truncate));
+    testFile.close();
+
+    // qDebug() << "waiting max 5 seconds for notification for file recreationg to trigger";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 0);
+
+    watcher.addPath(testDir.dirName());
+
+    // remove the file again, should get a signal from the watcher
+    QVERIFY(testFile.remove());
+
+    timer.start(5000);
+    eventLoop.exec();
+
+    // remove the directory, should get a signal from the watcher
+    QVERIFY(QDir().rmdir("testDir"));
+
+    // qDebug() << "waiting max 5 seconds for notification for directory removal to trigger";
+    timer.start(5000);
+    eventLoop.exec();
+
+#ifdef Q_OS_WINCE
+    QEXPECT_FAIL("poller", "Directory does not get updated on file removal(See #137910)", Abort);
+#endif
+    QCOMPARE(changedSpy.count(), 2);
+    QCOMPARE(changedSpy.at(0).count(), 1);
+    QCOMPARE(changedSpy.at(1).count(), 1);
+
+    fileName = changedSpy.at(0).at(0).toString();
+    QCOMPARE(fileName, testDir.dirName());
+    fileName = changedSpy.at(1).at(0).toString();
+    QCOMPARE(fileName, testDir.dirName());
+
+    changedSpy.clear();
+
+    // recreate the file, we should not get any notification
+    if (!QDir().mkdir("testDir"))
+        QSKIP("Failed to recreate directory, skipping final test.", SkipSingle);
+
+    // qDebug() << "waiting max 5 seconds for notification for dir recreation to trigger";
+    timer.start(5000);
+    eventLoop.exec();
+
+    QCOMPARE(changedSpy.count(), 0);
+
+    QVERIFY(QDir().rmdir("testDir"));
+}
+
+void tst_QFileSystemWatcher::addPath()
+{
+    QFileSystemWatcher watcher;
+    QString home = QDir::homePath();
+    watcher.addPath(home);
+    QCOMPARE(watcher.directories().count(), 1);
+    QCOMPARE(watcher.directories().first(), home);
+    watcher.addPath(home);
+    QCOMPARE(watcher.directories().count(), 1);
+
+    // With empty string
+    QTest::ignoreMessage(QtWarningMsg, "QFileSystemWatcher::addPath: path is empty");
+    watcher.addPath(QString());
+}
+
+void tst_QFileSystemWatcher::removePath()
+{
+    QFileSystemWatcher watcher;
+    QString home = QDir::homePath();
+    watcher.addPath(home);
+    watcher.removePath(home);
+    QCOMPARE(watcher.directories().count(), 0);
+    watcher.removePath(home);
+    QCOMPARE(watcher.directories().count(), 0);
+
+    // With empty string
+    QTest::ignoreMessage(QtWarningMsg, "QFileSystemWatcher::removePath: path is empty");
+    watcher.removePath(QString());
+}
+
+void tst_QFileSystemWatcher::addPaths()
+{
+    QFileSystemWatcher watcher;
+    QStringList paths;
+    paths << QDir::homePath() << QDir::currentPath();
+    watcher.addPaths(paths);
+    QCOMPARE(watcher.directories().count(), 2);
+
+    // With empty list
+    paths.clear();
+    QTest::ignoreMessage(QtWarningMsg, "QFileSystemWatcher::addPaths: list is empty");
+    watcher.addPaths(paths);
+}
+
+void tst_QFileSystemWatcher::removePaths()
+{
+    QFileSystemWatcher watcher;
+    QStringList paths;
+    paths << QDir::homePath() << QDir::currentPath();
+    watcher.addPaths(paths);
+    QCOMPARE(watcher.directories().count(), 2);
+    watcher.removePaths(paths);
+    QCOMPARE(watcher.directories().count(), 0);
+
+    //With empty list
+    paths.clear();
+    QTest::ignoreMessage(QtWarningMsg, "QFileSystemWatcher::removePaths: list is empty");
+    watcher.removePaths(paths);
+}
+
+QTEST_MAIN(tst_QFileSystemWatcher)
+#include "tst_qfilesystemwatcher.moc"
+
+#endif