QGraphicsView drawing artifacts due to rounding errors.

Found during investigation of QTBUG-8820, and clearly visible in
examples/graphicsview/diagramscene when slowly moving an item out of the
viewport (left and top edge). Caused by two problems:
1) Using QRectF::toRect() instead of QRectF::toAlignedRect().
2) Didn't adjust the item's bounding rect properly in drawSubtree().

QRectF::toRect() is completely useless since all the coordinates are rounded
to the nearest integer. E.g. QRectF(-0.4, -0.4, 10.4, 10.4).toRect()
-> QRect(0, 0, 10, 10), whereas toAlignedRect() returns QRect(-1, -1, 11, 11).

Then when we have a proper aligned rect, we have to adjust it by 2
pixels in all directions (or 1 pixel in case of
QGraphicsView::DontAdjustForAntialiasing). At first glance this
adjustment seems too much, since one would assume adjusing the QRectF by
0.5 before using toAlignedRect() would be sufficient. That's sufficient
in an untransformed world with pens using BevelJoin. However, the story
is completely different as soon as the world is transformed or the pens
use a different join. It's basically complicated (in some cases
impossible) to calculate a pixel perfect aligned QRect, so instead we
adjust by the amount of pixels required in the worst case.

This commit also includes some optimizations for QRegion updates (since
I anyways had to change the code). There's no point in using QRegion
granularity if the viewport update mode is either FullViewportUpdate or
BoundingRectViewportUpdate.

Auto tests adjusted and new ones included.

Task-number: QTBUG-10338

1 files changed, 108 insertions, 15 deletions

diff --git a/tests/auto/qgraphicsview/tst_qgraphicsview.cpp b/tests/auto/qgraphicsview/tst_qgraphicsview.cpp
index d0752af..1df9a37 100644
--- a/tests/auto/qgraphicsview/tst_qgraphicsview.cpp
+++ b/tests/auto/qgraphicsview/tst_qgraphicsview.cpp
@@ -216,6 +216,8 @@ private slots:
     void exposeRegion();
     void update_data();
     void update();
+    void update2_data();
+    void update2();
     void inputMethodSensitivity();
     void inputContextReset();
     void indirectPainting();
@@ -1383,28 +1385,48 @@ void tst_QGraphicsView::itemsInRect_cosmeticAdjust_data()
 {
     QTest::addColumn<QRect>("updateRect");
     QTest::addColumn<int>("numPaints");
+    QTest::addColumn<bool>("adjustForAntialiasing");
 
-    QTest::newRow("nil") << QRect() << 1;
-    QTest::newRow("0, 0, 300, 100") << QRect(0, 0, 300, 100) << 1;
-    QTest::newRow("0, 0, 100, 300") << QRect(0, 0, 100, 300) << 1;
-    QTest::newRow("200, 0, 100, 300") << QRect(200, 0, 100, 300) << 1;
-    QTest::newRow("0, 200, 300, 100") << QRect(0, 200, 300, 100) << 1;
-    QTest::newRow("0, 0, 300, 99") << QRect(0, 0, 300, 99) << 0;
-    QTest::newRow("0, 0, 99, 300") << QRect(0, 0, 99, 300) << 0;
-    QTest::newRow("201, 0, 99, 300") << QRect(201, 0, 99, 300) << 0;
-    QTest::newRow("0, 201, 300, 99") << QRect(0, 201, 300, 99) << 0;
+    // Aliased.
+    QTest::newRow("nil") << QRect() << 1 << false;
+    QTest::newRow("0, 0, 300, 100") << QRect(0, 0, 300, 100) << 1 << false;
+    QTest::newRow("0, 0, 100, 300") << QRect(0, 0, 100, 300) << 1 << false;
+    QTest::newRow("200, 0, 100, 300") << QRect(200, 0, 100, 300) << 1 << false;
+    QTest::newRow("0, 200, 300, 100") << QRect(0, 200, 300, 100) << 1 << false;
+    QTest::newRow("0, 0, 300, 99") << QRect(0, 0, 300, 99) << 0 << false;
+    QTest::newRow("0, 0, 99, 300") << QRect(0, 0, 99, 300) << 0 << false;
+    QTest::newRow("201, 0, 99, 300") << QRect(201, 0, 99, 300) << 0 << false;
+    QTest::newRow("0, 201, 300, 99") << QRect(0, 201, 300, 99) << 0 << false;
+
+    // Anti-aliased.
+    QTest::newRow("nil") << QRect() << 1 << true;
+    QTest::newRow("0, 0, 300, 100") << QRect(0, 0, 300, 100) << 1 << true;
+    QTest::newRow("0, 0, 100, 300") << QRect(0, 0, 100, 300) << 1 << true;
+    QTest::newRow("200, 0, 100, 300") << QRect(200, 0, 100, 300) << 1 << true;
+    QTest::newRow("0, 200, 300, 100") << QRect(0, 200, 300, 100) << 1 << true;
+    QTest::newRow("0, 0, 300, 99") << QRect(0, 0, 300, 99) << 1 << true;
+    QTest::newRow("0, 0, 99, 300") << QRect(0, 0, 99, 300) << 1 << true;
+    QTest::newRow("201, 0, 99, 300") << QRect(201, 0, 99, 300) << 1 << true;
+    QTest::newRow("0, 201, 300, 99") << QRect(0, 201, 300, 99) << 1 << true;
+    QTest::newRow("0, 0, 300, 98") << QRect(0, 0, 300, 98) << 0 << false;
+    QTest::newRow("0, 0, 98, 300") << QRect(0, 0, 98, 300) << 0 << false;
+    QTest::newRow("202, 0, 98, 300") << QRect(202, 0, 98, 300) << 0 << false;
+    QTest::newRow("0, 202, 300, 98") << QRect(0, 202, 300, 98) << 0 << false;
 }
 
 void tst_QGraphicsView::itemsInRect_cosmeticAdjust()
 {
     QFETCH(QRect, updateRect);
     QFETCH(int, numPaints);
+    QFETCH(bool, adjustForAntialiasing);
 
     QGraphicsScene scene(-100, -100, 200, 200);
     CountPaintItem *rect = new CountPaintItem(QRectF(-50, -50, 100, 100));
     scene.addItem(rect);
 
     QGraphicsView view(&scene);
+    view.setOptimizationFlag(QGraphicsView::DontAdjustForAntialiasing, !adjustForAntialiasing);
+    view.setRenderHint(QPainter::Antialiasing, adjustForAntialiasing);
     view.setFrameStyle(0);
     view.resize(300, 300);
     view.show();
@@ -2219,8 +2241,8 @@ void tst_QGraphicsView::viewportUpdateMode()
     QTRY_VERIFY(!view.lastUpdateRegions.isEmpty());
 #ifndef QT_MAC_USE_COCOA //cocoa doesn't support drawing regions
     QCOMPARE(view.lastUpdateRegions.last().rects().size(), 2);
-    QCOMPARE(view.lastUpdateRegions.last().rects().at(0).size(), QSize(15, 15));
-    QCOMPARE(view.lastUpdateRegions.last().rects().at(1).size(), QSize(15, 15));
+    QCOMPARE(view.lastUpdateRegions.last().rects().at(0).size(), QSize(14, 14));
+    QCOMPARE(view.lastUpdateRegions.last().rects().at(1).size(), QSize(14, 14));
 #endif
 
     // Set full update mode.
@@ -2254,7 +2276,7 @@ void tst_QGraphicsView::viewportUpdateMode()
 
     // The view gets one bounding rect update.
     QCOMPARE(view.lastUpdateRegions.last().rects().size(), 1);
-    QCOMPARE(view.lastUpdateRegions.last().rects().at(0).size(), QSize(33, 33));
+    QCOMPARE(view.lastUpdateRegions.last().rects().at(0).size(), QSize(32, 32));
 
     // Set no update mode
     view.setViewportUpdateMode(QGraphicsView::NoViewportUpdate);
@@ -3647,7 +3669,6 @@ void tst_QGraphicsView::update()
     const bool intersects = updateRect.intersects(viewportRect);
     QGraphicsViewPrivate *viewPrivate = static_cast<QGraphicsViewPrivate *>(qt_widget_private(&view));
     QTRY_COMPARE(viewPrivate->updateRect(updateRect), intersects);
-    QCOMPARE(viewPrivate->updateRegion(updateRect), intersects);
 
     view.lastUpdateRegions.clear();
     viewPrivate->processPendingUpdates();
@@ -3658,13 +3679,85 @@ void tst_QGraphicsView::update()
         QTRY_VERIFY(view.lastUpdateRegions.isEmpty());
     } else {
         QTRY_COMPARE(view.lastUpdateRegions.size(), 1);
-        // Note that we adjust by 2 for antialiasing.
-        QTRY_COMPARE(view.lastUpdateRegions.at(0), QRegion(updateRect.adjusted(-2, -2, 2, 2) & viewportRect));
+        QTRY_COMPARE(view.lastUpdateRegions.at(0), QRegion(updateRect) & viewportRect);
     }
     QTRY_VERIFY(!viewPrivate->fullUpdatePending);
 #endif
 }
 
+void tst_QGraphicsView::update2_data()
+{
+    QTest::addColumn<qreal>("penWidth");
+    QTest::addColumn<bool>("antialiasing");
+
+    // Anti-aliased.
+    QTest::newRow("pen width: 0.0, antialiasing: true") << 0.0 << true;
+    QTest::newRow("pen width: 1.5, antialiasing: true") << 1.5 << true;
+    QTest::newRow("pen width: 2.0, antialiasing: true") << 2.0 << true;
+    QTest::newRow("pen width: 3.0, antialiasing: true") << 3.0 << true;
+
+    // Aliased.
+    QTest::newRow("pen width: 0.0, antialiasing: false") << 0.0 << false;
+    QTest::newRow("pen width: 1.5, antialiasing: false") << 1.5 << false;
+    QTest::newRow("pen width: 2.0, antialiasing: false") << 2.0 << false;
+    QTest::newRow("pen width: 3.0, antialiasing: false") << 3.0 << false;
+}
+
+void tst_QGraphicsView::update2()
+{
+    QFETCH(qreal, penWidth);
+    QFETCH(bool, antialiasing);
+
+    // Create a rect item.
+    const QRectF rawItemRect(-50.4, -50.3, 100.2, 100.1);
+    CountPaintItem *rect = new CountPaintItem(rawItemRect);
+    QPen pen;
+    pen.setWidthF(penWidth);
+    rect->setPen(pen);
+
+    // Add item to a scene.
+    QGraphicsScene scene(-100, -100, 200, 200);
+    scene.addItem(rect);
+
+    // Create a view on the scene.
+    CustomView view(&scene);
+    view.setOptimizationFlag(QGraphicsView::DontAdjustForAntialiasing, !antialiasing);
+    view.setRenderHint(QPainter::Antialiasing, antialiasing);
+    view.setFrameStyle(0);
+    view.resize(200, 200);
+    view.show();
+    QTest::qWaitForWindowShown(&view) ;
+    QTRY_VERIFY(rect->numPaints > 0);
+
+    // Calculate expected update region for the rect.
+    QRectF expectedItemBoundingRect = rawItemRect;
+    const qreal halfPenWidth = penWidth / qreal(2.0);
+    expectedItemBoundingRect.adjust(-halfPenWidth, -halfPenWidth, halfPenWidth, halfPenWidth);
+    QCOMPARE(rect->boundingRect(), expectedItemBoundingRect);
+
+    QRect expectedItemDeviceBoundingRect = rect->deviceTransform(view.viewportTransform())
+                                           .mapRect(expectedItemBoundingRect).toAlignedRect();
+    if (antialiasing)
+        expectedItemDeviceBoundingRect.adjust(-2, -2, 2, 2);
+    else
+        expectedItemDeviceBoundingRect.adjust(-1, -1, 1, 1);
+    const QRegion expectedUpdateRegion(expectedItemDeviceBoundingRect);
+
+    // Reset.
+    rect->numPaints = 0;
+    view.lastUpdateRegions.clear();
+    view.painted = false;
+
+    rect->update();
+    QTRY_VERIFY(view.painted);
+
+#ifndef QT_MAC_USE_COCOA //cocoa doesn't support drawing regions
+    QTRY_VERIFY(view.painted);
+    QCOMPARE(view.lastUpdateRegions.size(), 1);
+    QCOMPARE(view.lastUpdateRegions.at(0), expectedUpdateRegion);
+#endif
+}
+
 class FocusItem : public QGraphicsRectItem
 {
 public: