diff options
131 files changed, 1368 insertions, 698 deletions
diff --git a/config.tests/mac/xcodeversion.cpp b/config.tests/mac/xcodeversion.cpp index df208e3..0cc3777 100644 --- a/config.tests/mac/xcodeversion.cpp +++ b/config.tests/mac/xcodeversion.cpp @@ -73,7 +73,7 @@ int main(int argc, const char **argv) const char * ok3 ="3.0"; // ptr = fail1; // printf ("string: %s\n", ptr); - + int length = strlen(ptr); if (length < 3) // expect "x.y" at least return internal_error; @@ -94,6 +94,6 @@ int main(int argc, const char **argv) if (ptr[4] < '1') return fail; - + return success; -}
\ No newline at end of file +} diff --git a/demos/embedded/lightmaps/lightmaps.h b/demos/embedded/lightmaps/lightmaps.h index 45b5c18..0e458ea 100644 --- a/demos/embedded/lightmaps/lightmaps.h +++ b/demos/embedded/lightmaps/lightmaps.h @@ -85,4 +85,4 @@ private: bool invert; }; -#endif
\ No newline at end of file +#endif diff --git a/demos/embedded/lightmaps/mapzoom.h b/demos/embedded/lightmaps/mapzoom.h index ac70a23..935660c 100644 --- a/demos/embedded/lightmaps/mapzoom.h +++ b/demos/embedded/lightmaps/mapzoom.h @@ -66,4 +66,4 @@ private: QNetworkSession *networkSession; }; -#endif
\ No newline at end of file +#endif diff --git a/demos/embedded/lightmaps/slippymap.h b/demos/embedded/lightmaps/slippymap.h index 64ba5c3..480dc81 100644 --- a/demos/embedded/lightmaps/slippymap.h +++ b/demos/embedded/lightmaps/slippymap.h @@ -84,4 +84,4 @@ private: QUrl m_url; }; -#endif
\ No newline at end of file +#endif diff --git a/demos/mobile/guitartuner/src/guitartuner.rc b/demos/mobile/guitartuner/src/guitartuner.rc index 85cee0b..b4f7a11 100644 --- a/demos/mobile/guitartuner/src/guitartuner.rc +++ b/demos/mobile/guitartuner/src/guitartuner.rc @@ -20,4 +20,4 @@ BEGIN BEGIN VALUE "Translation", 0x409, 1252 END -END
\ No newline at end of file +END diff --git a/doc/src/declarative/network.qdoc b/doc/src/declarative/network.qdoc index cb83542..0ebf8ae 100644 --- a/doc/src/declarative/network.qdoc +++ b/doc/src/declarative/network.qdoc @@ -134,10 +134,9 @@ One of the URL schemes built into Qt is the "qrc" scheme. This allows content to the executable using \l{The Qt Resource System}. Using this, an executable can reference QML content that is compiled into the executable: -\code - QDeclarativeView *canvas = new QDeclarativeView; - canvas->setUrl(QUrl("qrc:/dial.qml")); -\endcode +\quotefromfile snippets/declarative/qtbinding/resources/main.cpp +\skipto view +\printuntil setSource The content itself can then use relative URLs, and so be transparently unaware that the content is compiled into the executable. diff --git a/doc/src/getting-started/gettingstartedqt.qdoc b/doc/src/getting-started/gettingstartedqt.qdoc index eda5ee1..d37e8e0 100644 --- a/doc/src/getting-started/gettingstartedqt.qdoc +++ b/doc/src/getting-started/gettingstartedqt.qdoc @@ -38,6 +38,12 @@ documentation, and find the information you need for the application you are developing. + The code for this tutorial is available in \c + {examples/tutorials/gettingStarted/gsQt} under your Qt + installation. If you are using the Qt SDK, you will find it in + \c{Examples/4.7/tutorials/gettingStarted/gsQt} (change \c{4.7} if + you are using a later Qt version). + \section1 Hello Notepad In this first example, we simply create and show a text edit in a @@ -139,28 +145,28 @@ Let us take a look at the code. \code - 1 #include <QtGui> - 2 - 3 int main(int argv, char **args) - 4 { - 5 QApplication app(argv, args); - 6 - 7 QTextEdit textEdit; - 8 QPushButton quitButton("Quit"); - 9 -10 QObject::connect(&quitButton, SIGNAL(clicked()), qApp, SLOT(quit())); -11 -12 QVBoxLayout layout; -13 layout.addWidget(&textEdit); -14 layout.addWidget(&quitButton); -15 -16 QWidget window; -17 window.setLayout(&layout); -18 -19 window.show(); -20 -21 return app.exec(); -22 } + 1 #include <QtGui> + 2 + 3 int main(int argv, char **args) + 4 { + 5 QApplication app(argv, args); + 6 + 7 QTextEdit *textEdit = new QTextEdit; + 8 QPushButton *quitButton = new QPushButton("&Quit"); + 9 +10 QObject::connect(quitButton, SIGNAL(clicked()), qApp, SLOT(quit())); +11 +12 QVBoxLayout *layout = new QVBoxLayout; +13 layout->addWidget(textEdit); +14 layout->addWidget(quitButton); +15 +16 QWidget window; +17 window.setLayout(layout); +18 +19 window.show(); +20 +21 return app.exec(); +22 } \endcode Line 1 includes QtGui, which contains all of Qt's GUI classes. @@ -278,9 +284,25 @@ visible strings. This function is necessary when you want to provide your application in more than one language (e.g. English and Chinese). We will not go into details here, but you can follow - the \c {Qt Linguist} link from the learn more table. We will not - look at the implementation of \c quit() slot and the \c main() - function, but you can check out the source code if you want to. + the \c {Qt Linguist} link from the learn more table. + + Here is the \c quit() slot: + + \code +75 void Notepad::quit() +76 { +77 QMessageBox messageBox; +78 messageBox.setWindowTitle(tr("Notepad")); +79 messageBox.setText(tr("Do you really want to quit?")); +80 messageBox.setStandardButtons(QMessageBox::Yes | QMessageBox::No); +81 messageBox.setDefaultButton(QMessageBox::No); +82 if (messageBox.exec() == QMessageBox::Yes) +83 qApp->quit(); +84 } + \endcode + + We use the QMessageBox class to display a dialog that asks the + user whether he/she really wants to quit. \section2 Learn More diff --git a/doc/src/qt-webpages.qdoc b/doc/src/qt-webpages.qdoc index c993575..f67ff83 100644 --- a/doc/src/qt-webpages.qdoc +++ b/doc/src/qt-webpages.qdoc @@ -221,7 +221,7 @@ \title Forums on Qt Developer Network */ /*! - \externalpage http://developer.qt.nokia.com/wikis + \externalpage http://developer.qt.nokia.com/wiki \title Wiki on Qt Developer Network */ /*! diff --git a/doc/src/snippets/qcolumnview/main.cpp b/doc/src/snippets/qcolumnview/main.cpp index c39a4bb..fecff12 100644 --- a/doc/src/snippets/qcolumnview/main.cpp +++ b/doc/src/snippets/qcolumnview/main.cpp @@ -76,4 +76,4 @@ int main(int argc, char *argv[]) columnView.show(); return app.exec(); -}
\ No newline at end of file +} diff --git a/doc/src/snippets/textdocument-imagedrop/main.cpp b/doc/src/snippets/textdocument-imagedrop/main.cpp index 24cd2de..0cdf3a1 100644 --- a/doc/src/snippets/textdocument-imagedrop/main.cpp +++ b/doc/src/snippets/textdocument-imagedrop/main.cpp @@ -49,4 +49,4 @@ int main(int argc, char * argv[]) textEdit->show(); return app.exec(); -}
\ No newline at end of file +} diff --git a/doc/src/snippets/textdocument-imagedrop/textedit.h b/doc/src/snippets/textdocument-imagedrop/textedit.h index 9e0492b..9db9f17 100644 --- a/doc/src/snippets/textdocument-imagedrop/textedit.h +++ b/doc/src/snippets/textdocument-imagedrop/textedit.h @@ -46,11 +46,11 @@ class TextEdit : public QTextEdit { Q_OBJECT - -public: + +public: TextEdit(QWidget *parent=0); bool canInsertFromMimeData( const QMimeData *source ) const; void insertFromMimeData( const QMimeData *source ); }; -#endif
\ No newline at end of file +#endif diff --git a/examples/tutorials/gettingStarted/gsQml/filedialog/dialogPlugin.cpp b/examples/tutorials/gettingStarted/gsQml/filedialog/dialogPlugin.cpp index fde24d9..3b02c63 100644 --- a/examples/tutorials/gettingStarted/gsQml/filedialog/dialogPlugin.cpp +++ b/examples/tutorials/gettingStarted/gsQml/filedialog/dialogPlugin.cpp @@ -51,4 +51,4 @@ void DialogPlugin::registerTypes(const char *uri) } //FileDialog is the plugin name (same as the TARGET in the project file) and DialogPlugin is the plugin classs -Q_EXPORT_PLUGIN2(FileDialog, DialogPlugin);
\ No newline at end of file +Q_EXPORT_PLUGIN2(FileDialog, DialogPlugin); diff --git a/examples/tutorials/gettingStarted/gsQml/filedialog/directory.cpp b/examples/tutorials/gettingStarted/gsQml/filedialog/directory.cpp index c675fc9..52bdfc7 100644 --- a/examples/tutorials/gettingStarted/gsQml/filedialog/directory.cpp +++ b/examples/tutorials/gettingStarted/gsQml/filedialog/directory.cpp @@ -221,4 +221,4 @@ void Directory::refresh() } m_fileList.append(file); } -}
\ No newline at end of file +} diff --git a/examples/tutorials/gettingStarted/gsQml/filedialog/file.cpp b/examples/tutorials/gettingStarted/gsQml/filedialog/file.cpp index 44b0915..17740f2 100644 --- a/examples/tutorials/gettingStarted/gsQml/filedialog/file.cpp +++ b/examples/tutorials/gettingStarted/gsQml/filedialog/file.cpp @@ -54,4 +54,4 @@ void File::setName(const QString &str){ m_name = str; emit nameChanged(); } -}
\ No newline at end of file +} diff --git a/examples/tutorials/gettingStarted/gsQml/filedialog/file.h b/examples/tutorials/gettingStarted/gsQml/filedialog/file.h index 21e8ebb..6aa6a6a 100644 --- a/examples/tutorials/gettingStarted/gsQml/filedialog/file.h +++ b/examples/tutorials/gettingStarted/gsQml/filedialog/file.h @@ -64,4 +64,4 @@ class File : public QObject{ QString m_name; }; -#endif
\ No newline at end of file +#endif diff --git a/examples/tutorials/gettingStarted/gsQt/part2/main.cpp b/examples/tutorials/gettingStarted/gsQt/part2/main.cpp index 24b4d77..afa26e1 100755 --- a/examples/tutorials/gettingStarted/gsQt/part2/main.cpp +++ b/examples/tutorials/gettingStarted/gsQt/part2/main.cpp @@ -44,17 +44,17 @@ int main(int argv, char **args) { QApplication app(argv, args); - QTextEdit textEdit; - QPushButton quitButton("&Quit"); + QTextEdit *textEdit = new QTextEdit; + QPushButton *quitButton = new QPushButton("&Quit"); - QObject::connect(&quitButton, SIGNAL(clicked()), qApp, SLOT(quit())); + QObject::connect(quitButton, SIGNAL(clicked()), qApp, SLOT(quit())); - QVBoxLayout layout; - layout.addWidget(&textEdit); - layout.addWidget(&quitButton); + QVBoxLayout *layout = new QVBoxLayout; + layout->addWidget(textEdit); + layout->addWidget(quitButton); QWidget window; - window.setLayout(&layout); + window.setLayout(layout); window.show(); diff --git a/examples/tutorials/modelview/4_headers/main.cpp b/examples/tutorials/modelview/4_headers/main.cpp index c89829a..8a4ab8f 100755 --- a/examples/tutorials/modelview/4_headers/main.cpp +++ b/examples/tutorials/modelview/4_headers/main.cpp @@ -50,4 +50,4 @@ int main(int argc, char *argv[]) tableView.setModel( &myModel ); tableView.show(); return a.exec(); -}
\ No newline at end of file +} diff --git a/examples/tutorials/threads/clock/clockthread.h b/examples/tutorials/threads/clock/clockthread.h index 966dbea..d77a52b 100644 --- a/examples/tutorials/threads/clock/clockthread.h +++ b/examples/tutorials/threads/clock/clockthread.h @@ -61,4 +61,4 @@ private slots: }; //! [1] -#endif // CLOCKTHREAD_H
\ No newline at end of file +#endif // CLOCKTHREAD_H diff --git a/mkspecs/qpa/macx-iphonedevice-g++/qmake.conf b/mkspecs/qpa/macx-iphonedevice-g++/qmake.conf index d69f58d..faec47d 100644 --- a/mkspecs/qpa/macx-iphonedevice-g++/qmake.conf +++ b/mkspecs/qpa/macx-iphonedevice-g++/qmake.conf @@ -43,10 +43,10 @@ QMAKE_CXX = /Developer/Platforms/iPhoneOS.platform/Developer/usr/b QMAKE_LINK = $$QMAKE_CXX QMAKE_LINK_SHLIB = $$QMAKE_CXX -QMAKE_CFLAGS += -arch armv7 -marm -isysroot $$QMAKE_IOS_SDK -fmessage-length=0 -fexceptions -miphoneos-version-min=4.2 +QMAKE_CFLAGS += -arch armv7 -isysroot $$QMAKE_IOS_SDK -fmessage-length=0 -fexceptions -miphoneos-version-min=4.2 QMAKE_CXXFLAGS += $$QMAKE_CFLAGS -fvisibility=hidden -fvisibility-inlines-hidden -QMAKE_OBJECTIVE_CFLAGS += -arch armv7 -marm -isysroot $$QMAKE_IOS_SDK -fmessage-length=0 -fexceptions -miphoneos-version-min=4.2 -QMAKE_LFLAGS += -arch armv7 -marm -miphoneos-version-min=4.2 -Wl,-syslibroot,$$QMAKE_IOS_SDK +QMAKE_OBJECTIVE_CFLAGS += -arch armv7 -isysroot $$QMAKE_IOS_SDK -fmessage-length=0 -fexceptions -miphoneos-version-min=4.2 +QMAKE_LFLAGS += -arch armv7 -miphoneos-version-min=4.2 -Wl,-syslibroot,$$QMAKE_IOS_SDK QMAKE_LFLAGS += -framework Foundation -framework UIKit -framework QuartzCore -lz QMAKE_INCDIR_OPENGL = diff --git a/src/corelib/arch/qatomic_armv6.h b/src/corelib/arch/qatomic_armv6.h index 96b561e..dd465db 100644 --- a/src/corelib/arch/qatomic_armv6.h +++ b/src/corelib/arch/qatomic_armv6.h @@ -152,6 +152,7 @@ inline bool QBasicAtomicInt::testAndSetRelaxed(int expectedValue, int newValue) asm volatile("0:\n" "ldrex %[result], [%[_q_value]]\n" "eors %[result], %[result], %[expectedValue]\n" + "itt eq\n" "strexeq %[result], %[newValue], [%[_q_value]]\n" "teqeq %[result], #1\n" "beq 0b\n" @@ -210,6 +211,7 @@ Q_INLINE_TEMPLATE bool QBasicAtomicPointer<T>::testAndSetRelaxed(T *expectedValu asm volatile("0:\n" "ldrex %[result], [%[_q_value]]\n" "eors %[result], %[result], %[expectedValue]\n" + "itt eq\n" "strexeq %[result], %[newValue], [%[_q_value]]\n" "teqeq %[result], #1\n" "beq 0b\n" diff --git a/src/corelib/io/qdir.cpp b/src/corelib/io/qdir.cpp index f9196e0..c0c62e1 100644 --- a/src/corelib/io/qdir.cpp +++ b/src/corelib/io/qdir.cpp @@ -1633,9 +1633,13 @@ bool QDir::operator==(const QDir &dir) const if (d->filters == other->filters && d->sort == other->sort && d->nameFilters == other->nameFilters) { - d->resolveAbsoluteEntry(); - other->resolveAbsoluteEntry(); - return d->absoluteDirEntry.filePath().compare(other->absoluteDirEntry.filePath(), sensitive) == 0; + + // Assume directories are the same if path is the same + if (d->dirEntry.filePath() == other->dirEntry.filePath()) + return true; + + // Fallback to expensive canonical path computation + return canonicalPath().compare(dir.canonicalPath(), sensitive) == 0; } return false; } diff --git a/src/corelib/io/qfile.cpp b/src/corelib/io/qfile.cpp index 929b2f9..06c403a 100644 --- a/src/corelib/io/qfile.cpp +++ b/src/corelib/io/qfile.cpp @@ -366,9 +366,11 @@ QFilePrivate::setError(QFile::FileError err, int errNum) \value AutoCloseHandle The file handle passed into open() should be closed by close(), the default behaviour is that close just flushes - the file and the app is responsible for closing the file handle. When - opening a file by name, this flag is ignored as Qt always "owns" the + the file and the application is responsible for closing the file handle. + When opening a file by name, this flag is ignored as Qt always "owns" the file handle and must close it. + \value DontCloseHandle The file handle passed into open() will not be + closed by Qt. The application must ensure that close() is called. */ #ifdef QT3_SUPPORT @@ -1210,7 +1212,7 @@ bool QFile::open(int fd, OpenMode mode) Returns true if successful; otherwise returns false. When a QFile is opened using this function, behaviour of close() is - controlled by the AutoCloseHandle flag. + controlled by the \a handleFlags argument. If AutoCloseHandle is specified, and this function succeeds, then calling close() closes the adopted handle. Otherwise, close() does not actually close the file, but only flushes it. @@ -1269,7 +1271,7 @@ bool QFile::open(int fd, OpenMode mode, FileHandleFlags handleFlags) Returns true if successful; otherwise returns false. When a QFile is opened using this function, behaviour of close() is - controlled by the AutoCloseHandle flag. + controlled by the \a handleFlags argument. If AutoCloseHandle is specified, and this function succeeds, then calling close() closes the adopted handle. Otherwise, close() does not actually close the file, but only flushes it. diff --git a/src/corelib/io/qfileinfo.cpp b/src/corelib/io/qfileinfo.cpp index ca42c87..ff328da 100644 --- a/src/corelib/io/qfileinfo.cpp +++ b/src/corelib/io/qfileinfo.cpp @@ -391,6 +391,11 @@ bool QFileInfo::operator==(const QFileInfo &fileinfo) const return true; if (d->isDefaultConstructed || fileinfo.d_ptr->isDefaultConstructed) return false; + + // Assume files are the same if path is the same + if (d->fileEntry.filePath() == fileinfo.d_ptr->fileEntry.filePath()) + return true; + Qt::CaseSensitivity sensitive; if (d->fileEngine == 0 || fileinfo.d_ptr->fileEngine == 0) { if (d->fileEngine != fileinfo.d_ptr->fileEngine) // one is native, the other is a custom file-engine @@ -406,6 +411,7 @@ bool QFileInfo::operator==(const QFileInfo &fileinfo) const if (fileinfo.size() != size()) //if the size isn't the same... return false; + // Fallback to expensive canonical path computation return canonicalFilePath().compare(fileinfo.canonicalFilePath(), sensitive) == 0; } diff --git a/src/corelib/io/qfilesystemengine_win.cpp b/src/corelib/io/qfilesystemengine_win.cpp index f704fc3..764ee6d 100644 --- a/src/corelib/io/qfilesystemengine_win.cpp +++ b/src/corelib/io/qfilesystemengine_win.cpp @@ -536,7 +536,7 @@ QFileSystemEntry QFileSystemEngine::absoluteName(const QFileSystemEntry &entry) // Force uppercase drive letters. ret[0] = ret.at(0).toUpper(); } - return QFileSystemEntry(ret); + return QFileSystemEntry(ret, QFileSystemEntry::FromInternalPath()); } //static @@ -1052,11 +1052,12 @@ QString QFileSystemEngine::tempPath() } if (ret.isEmpty()) { #if !defined(Q_OS_WINCE) - ret = QLatin1String("c:/tmp"); + ret = QLatin1String("C:/tmp"); #else ret = QLatin1String("/Temp"); #endif - } + } else if (ret.length() >= 2 && ret[1] == QLatin1Char(':')) + ret[0] = ret.at(0).toUpper(); // Force uppercase drive letters. return ret; } diff --git a/src/corelib/io/qfsfileengine.cpp b/src/corelib/io/qfsfileengine.cpp index 548f9cf..e1f3123 100644 --- a/src/corelib/io/qfsfileengine.cpp +++ b/src/corelib/io/qfsfileengine.cpp @@ -233,6 +233,14 @@ bool QFSFileEngine::open(QIODevice::OpenMode openMode, FILE *fh) return open(openMode, fh, QFile::DontCloseHandle); } +/*! + Opens the file handle \a fh in \a openMode mode. Returns true + on success; otherwise returns false. + + The \a handleFlags argument specifies whether the file handle will be + closed by Qt. See the QFile::FileHandleFlags documentation for more + information. +*/ bool QFSFileEngine::open(QIODevice::OpenMode openMode, FILE *fh, QFile::FileHandleFlags handleFlags) { Q_D(QFSFileEngine); @@ -294,6 +302,14 @@ bool QFSFileEngine::open(QIODevice::OpenMode openMode, int fd) return open(openMode, fd, QFile::DontCloseHandle); } +/*! + Opens the file descriptor \a fd in \a openMode mode. Returns true + on success; otherwise returns false. + + The \a handleFlags argument specifies whether the file handle will be + closed by Qt. See the QFile::FileHandleFlags documentation for more + information. +*/ bool QFSFileEngine::open(QIODevice::OpenMode openMode, int fd, QFile::FileHandleFlags handleFlags) { Q_D(QFSFileEngine); diff --git a/src/corelib/io/qfsfileengine_unix.cpp b/src/corelib/io/qfsfileengine_unix.cpp index 9de282a..4961722 100644 --- a/src/corelib/io/qfsfileengine_unix.cpp +++ b/src/corelib/io/qfsfileengine_unix.cpp @@ -252,6 +252,14 @@ bool QFSFileEnginePrivate::nativeOpen(QIODevice::OpenMode openMode) return true; } +/*! + Opens the file descriptor specified by \a file in the mode given by + \a openMode. Returns true on success; otherwise returns false. + + The \a handleFlags argument specifies whether the file handle will be + closed by Qt. See the QFile::FileHandleFlags documentation for more + information. +*/ bool QFSFileEngine::open(QIODevice::OpenMode openMode, const RFile &file, QFile::FileHandleFlags handleFlags) { Q_D(QFSFileEngine); diff --git a/src/corelib/io/qnoncontiguousbytedevice.cpp b/src/corelib/io/qnoncontiguousbytedevice.cpp index 5568920..d5ce56b 100644 --- a/src/corelib/io/qnoncontiguousbytedevice.cpp +++ b/src/corelib/io/qnoncontiguousbytedevice.cpp @@ -501,8 +501,6 @@ QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QIODevice *dev } /*! - \fn static QNonContiguousByteDevice* QNonContiguousByteDeviceFactory::create(QRingBuffer *ringBuffer); - Create a QNonContiguousByteDevice out of a QRingBuffer. \internal diff --git a/src/corelib/io/qtemporaryfile.cpp b/src/corelib/io/qtemporaryfile.cpp index d457601..e80a8b6 100644 --- a/src/corelib/io/qtemporaryfile.cpp +++ b/src/corelib/io/qtemporaryfile.cpp @@ -44,17 +44,18 @@ #ifndef QT_NO_TEMPORARYFILE #include "qplatformdefs.h" -#include "qabstractfileengine.h" #include "private/qfile_p.h" -#include "private/qabstractfileengine_p.h" #include "private/qfsfileengine_p.h" +#include "private/qsystemerror_p.h" +#include "private/qfilesystemengine_p.h" -#if !defined(Q_OS_WINCE) -# include <errno.h> +#if defined(Q_OS_SYMBIAN) +#include "private/qcore_symbian_p.h" #endif -#if defined(Q_OS_UNIX) -# include "private/qcore_unix_p.h" // overrides QT_OPEN +#if !defined(Q_OS_WIN) && !defined(Q_OS_SYMBIAN) +#include "private/qcore_unix_p.h" // overrides QT_OPEN +#include <errno.h> #endif #if defined(QT_BUILD_CORE_LIB) @@ -63,6 +64,30 @@ QT_BEGIN_NAMESPACE +#if defined(Q_OS_WIN) || defined(Q_OS_SYMBIAN) +typedef ushort Char; + +static inline Char Latin1Char(char ch) +{ + return ushort(uchar(ch)); +} + +# ifdef Q_OS_WIN +typedef HANDLE NativeFileHandle; +# else // Q_OS_SYMBIAN +# ifdef SYMBIAN_ENABLE_64_BIT_FILE_SERVER_API +typedef RFile64 NativeFileHandle; +# else +typedef RFile NativeFileHandle; +# endif +# endif + +#else // POSIX +typedef char Char; +typedef char Latin1Char; +typedef int NativeFileHandle; +#endif + /* * Copyright (c) 1987, 1993 * The Regents of the University of California. All rights reserved. @@ -96,27 +121,33 @@ QT_BEGIN_NAMESPACE \internal Generates a unique file path and returns a native handle to the open file. - \a path is used as a template when generating unique paths, - \a placeholderStart and \a placeholderEnd delimit the sub-string that will - be randomized. + \a path is used as a template when generating unique paths, \a pos + identifies the position of the first character that will be replaced in the + template and \a length the number of characters that may be substituted. Returns an open handle to the newly created file if successful, an invalid handle otherwise. In both cases, the string in \a path will be changed and contain the generated path name. */ -static int createFileFromTemplate(char *const path, - char *const placeholderStart, char *const placeholderEnd) +static bool createFileFromTemplate(NativeFileHandle &file, + QFileSystemEntry::NativePath &path, size_t pos, size_t length, + QSystemError &error) { - Q_ASSERT(placeholderEnd > placeholderStart); + Q_ASSERT(length != 0); + Q_ASSERT(pos < size_t(path.length())); + Q_ASSERT(length <= size_t(path.length()) - pos); + + Char *const placeholderStart = (Char *)path.data() + pos; + Char *const placeholderEnd = placeholderStart + length; // Initialize placeholder with random chars + PID. { - char *rIter = placeholderEnd; + Char *rIter = placeholderEnd; #if defined(QT_BUILD_CORE_LIB) quint64 pid = quint64(QCoreApplication::applicationPid()); do { - *--rIter = (pid % 10) + '0'; + *--rIter = Latin1Char((pid % 10) + '0'); pid /= 10; } while (rIter != placeholderStart && pid != 0); #endif @@ -124,48 +155,82 @@ static int createFileFromTemplate(char *const path, while (rIter != placeholderStart) { char ch = char((qrand() & 0xffff) % (26 + 26)); if (ch < 26) - *--rIter = ch + 'A'; + *--rIter = Latin1Char(ch + 'A'); else - *--rIter = ch - 26 + 'a'; + *--rIter = Latin1Char(ch - 26 + 'a'); } } +#ifdef Q_OS_SYMBIAN + RFs& fs = qt_s60GetRFs(); +#endif + for (;;) { // Atomically create file and obtain handle -#ifndef Q_OS_WIN - { - int fd = QT_OPEN(path, QT_OPEN_CREAT | O_EXCL | QT_OPEN_RDWR | QT_OPEN_LARGEFILE, 0600); - if (fd != -1) - return fd; - if (errno != EEXIST) - return -1; +#if defined(Q_OS_WIN) + file = CreateFile((const wchar_t *)path.constData(), + GENERIC_READ | GENERIC_WRITE, + FILE_SHARE_READ | FILE_SHARE_WRITE, NULL, CREATE_NEW, + FILE_ATTRIBUTE_NORMAL, NULL); + + if (file != INVALID_HANDLE_VALUE) + return true; + + DWORD err = GetLastError(); + if (err != ERROR_FILE_EXISTS) { + error = QSystemError(err, QSystemError::NativeError); + return false; + } +#elif defined(Q_OS_SYMBIAN) + TInt err = file.Create(fs, qt_QString2TPtrC(path), + EFileRead | EFileWrite | EFileShareReadersOrWriters); + + if (err == KErrNone) + return true; + + if (err != KErrAlreadyExists) { + error = QSystemError(err, QSystemError::NativeError); + return false; + } +#else // POSIX + file = QT_OPEN(path.constData(), + QT_OPEN_CREAT | O_EXCL | QT_OPEN_RDWR | QT_OPEN_LARGEFILE, + 0600); + + if (file != -1) + return true; + + int err = errno; + if (err != EEXIST) { + error = QSystemError(err, QSystemError::NativeError); + return false; } -#else - if (!QFileInfo(QString::fromLocal8Bit(path)).exists()) - return 1; #endif /* tricky little algorwwithm for backward compatibility */ - for (char *iter = placeholderStart;;) { + for (Char *iter = placeholderStart;;) { // Character progression: [0-9] => 'a' ... 'z' => 'A' .. 'Z' // String progression: "ZZaiC" => "aabiC" - switch (*iter) { + switch (char(*iter)) { case 'Z': // Rollover, advance next character - *iter = 'a'; - if (++iter == placeholderEnd) - return -1; + *iter = Latin1Char('a'); + if (++iter == placeholderEnd) { + // Out of alternatives. Return file exists error, previously set. + error = QSystemError(err, QSystemError::NativeError); + return false; + } continue; case '0': case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': - *iter = 'a'; + *iter = Latin1Char('a'); break; case 'z': // increment 'z' to 'A' - *iter = 'A'; + *iter = Latin1Char('A'); break; default: @@ -257,7 +322,7 @@ bool QTemporaryFileEngine::open(QIODevice::OpenMode openMode) QString qfilename = d->fileEntry.filePath(); - // Find placeholder string. + // Ensure there is a placeholder mask uint phPos = qfilename.length(); uint phLength = 0; @@ -269,70 +334,73 @@ bool QTemporaryFileEngine::open(QIODevice::OpenMode openMode) continue; } - if (qfilename[phPos] == QLatin1Char('/') - || phLength >= 6) { + if (phLength >= 6 + || qfilename[phPos] == QLatin1Char('/')) { ++phPos; break; } + // start over phLength = 0; } - QStringRef prefix, suffix; - if (phLength < 6) { - qfilename += QLatin1Char('.'); - prefix = QStringRef(&qfilename); - phLength = 6; - } else { - prefix = qfilename.leftRef(phPos); - suffix = qfilename.midRef(phPos + phLength); - } + if (phLength < 6) + qfilename.append(QLatin1String(".XXXXXX")); + + // "Nativify" :-) + QFileSystemEntry::NativePath filename = QFileSystemEngine::absoluteName( + QFileSystemEntry(qfilename, QFileSystemEntry::FromInternalPath())) + .nativeFilePath(); - QByteArray filename = prefix.toLocal8Bit(); + // Find mask in native path phPos = filename.length(); - if (suffix.isEmpty()) - filename.resize(phPos + phLength); - else - filename.insert(phPos + phLength, suffix.toLocal8Bit()); - - char *path = filename.data(); - -#ifndef Q_OS_WIN - int fd = createFileFromTemplate(path, path + phPos, path + phPos + phLength); - if (fd != -1) { - // First open the fd as an external file descriptor to - // initialize the engine properly. - if (QFSFileEngine::open(openMode, fd)) { - - // Allow the engine to close the handle even if it's "external". - d->closeFileHandle = true; - - // Restore the file names (open() resets them). - d->fileEntry = QFileSystemEntry(QString::fromLocal8Bit(path, filename.length())); //note that filename is NOT a native path - filePathIsTemplate = false; - return true; + phLength = 0; + while (phPos != 0) { + --phPos; + + if (filename[phPos] == Latin1Char('X')) { + ++phLength; + continue; } - QT_CLOSE(fd); - } - setError(errno == EMFILE ? QFile::ResourceError : QFile::OpenError, qt_error_string(errno)); - return false; -#else - if (createFileFromTemplate(path, path + phPos, path + phPos + phLength) == -1) { - return false; + if (phLength >= 6) { + ++phPos; + break; + } + + // start over + phLength = 0; } - QString template_ = d->fileEntry.filePath(); - d->fileEntry = QFileSystemEntry(QString::fromLocal8Bit(path, filename.length())); + Q_ASSERT(phLength >= 6); - if (QFSFileEngine::open(openMode)) { - filePathIsTemplate = false; - return true; + QSystemError error; +#if defined(Q_OS_WIN) + NativeFileHandle &file = d->fileHandle; +#elif defined(Q_OS_SYMBIAN) + NativeFileHandle &file = d->symbianFile; +#else // POSIX + NativeFileHandle &file = d->fd; +#endif + + if (!createFileFromTemplate(file, filename, phPos, phLength, error)) { + setError(QFile::OpenError, error.toString()); + return false; } - d->fileEntry = QFileSystemEntry(template_, QFileSystemEntry::FromInternalPath()); - return false; + d->fileEntry = QFileSystemEntry(filename, QFileSystemEntry::FromNativePath()); + +#if !defined(Q_OS_WIN) + d->closeFileHandle = true; #endif + + filePathIsTemplate = false; + + d->openMode = openMode; + d->lastFlushFailed = false; + d->tried_stat = 0; + + return true; } bool QTemporaryFileEngine::remove() diff --git a/src/corelib/io/qurl.cpp b/src/corelib/io/qurl.cpp index 4226f9e..60a4ce3 100644 --- a/src/corelib/io/qurl.cpp +++ b/src/corelib/io/qurl.cpp @@ -63,8 +63,9 @@ unencoded representation is suitable for showing to users, but the encoded representation is typically what you would send to a web server. For example, the unencoded URL - "http://b\uuml\c{}hler.example.com" would be sent to the server as - "http://xn--bhler-kva.example.com/List%20of%20applicants.xml". + "http://b\uuml\c{}hler.example.com/List of applicants.xml" would be sent to the server as + "http://xn--bhler-kva.example.com/List%20of%20applicants.xml", + and this can be verified by calling the toEncoded() function. A URL can also be constructed piece by piece by calling setScheme(), setUserName(), setPassword(), setHost(), setPort(), diff --git a/src/corelib/plugin/quuid.cpp b/src/corelib/plugin/quuid.cpp index eb29e6e..af63b79 100644 --- a/src/corelib/plugin/quuid.cpp +++ b/src/corelib/plugin/quuid.cpp @@ -387,17 +387,17 @@ QUuid::QUuid(const QByteArray &text) #endif /*! - Creates a QUuid object from the binary representation of the UUID, as - specified by RFC 4122 section 4.1.2. See toRfc4122() for a further - explanation of the order of bytes required. + \since 4.8 - The byte array accepted is NOT a human readable format. + Creates a QUuid object from the binary representation of the UUID given + by \a bytes, as specified by RFC 4122 section 4.1.2. See toRfc4122() for a + further explanation of the order of bytes required. - If the conversion fails, a null UUID is created. + The byte array accepted is \e not a human readable format. - \since 4.8 + If the conversion fails, a null UUID is created. - \sa toRfc4122(), QUuid() + \sa toRfc4122(), QUuid() */ QUuid QUuid::fromRfc4122(const QByteArray &bytes) { diff --git a/src/corelib/tools/qlocale.qdoc b/src/corelib/tools/qlocale.qdoc index 5d4f305..95a7165 100644 --- a/src/corelib/tools/qlocale.qdoc +++ b/src/corelib/tools/qlocale.qdoc @@ -806,6 +806,10 @@ \internal */ /*! + \fn QSystemLocale::CurrencyToStringArgument::CurrencyToStringArgument(const QVariant &v, const QString &s) + \internal +*/ +/*! \variable QSystemLocale::CurrencyToStringArgument::value An input value that should be converted to its string representation. diff --git a/src/dbus/qdbusabstractinterface.cpp b/src/dbus/qdbusabstractinterface.cpp index 187ad67..9f68313 100644 --- a/src/dbus/qdbusabstractinterface.cpp +++ b/src/dbus/qdbusabstractinterface.cpp @@ -88,6 +88,7 @@ QDBusAbstractInterfacePrivate::QDBusAbstractInterfacePrivate(const QString &serv : connection(con), service(serv), path(p), interface(iface), lastError(checkIfValid(serv, p, iface, isDynamic, (connectionPrivate() && connectionPrivate()->mode == QDBusConnectionPrivate::PeerMode))), + timeout(-1), isValid(!lastError.isValid()) { if (!isValid) @@ -144,7 +145,7 @@ void QDBusAbstractInterfacePrivate::property(const QMetaProperty &mp, QVariant & QLatin1String("Get")); QDBusMessagePrivate::setParametersValidated(msg, true); msg << interface << QString::fromUtf8(mp.name()); - QDBusMessage reply = connection.call(msg, QDBus::Block); + QDBusMessage reply = connection.call(msg, QDBus::Block, timeout); if (reply.type() != QDBusMessage::ReplyMessage) { lastError = reply; @@ -210,7 +211,7 @@ bool QDBusAbstractInterfacePrivate::setProperty(const QMetaProperty &mp, const Q QLatin1String("Set")); QDBusMessagePrivate::setParametersValidated(msg, true); msg << interface << QString::fromUtf8(mp.name()) << QVariant::fromValue(QDBusVariant(value)); - QDBusMessage reply = connection.call(msg, QDBus::Block); + QDBusMessage reply = connection.call(msg, QDBus::Block, timeout); if (reply.type() != QDBusMessage::ReplyMessage) { lastError = reply; @@ -384,6 +385,28 @@ QDBusError QDBusAbstractInterface::lastError() const } /*! + Sets the timeout in seconds for all future DBus calls to \a timeout. + -1 means the default DBus timeout (usually 25 seconds). + + \since 4.8 +*/ +void QDBusAbstractInterface::setTimeout(int timeout) +{ + d_func()->timeout = timeout; +} + +/*! + Returns the current value of the timeout in seconds. + -1 means the default DBus timeout (usually 25 seconds). + + \since 4.8 +*/ +int QDBusAbstractInterface::timeout() const +{ + return d_func()->timeout; +} + +/*! Places a call to the remote method specified by \a method on this interface, using \a args as arguments. This function returns the message that was received as a reply, which can be a normal QDBusMessage::ReplyMessage (indicating success) or QDBusMessage::ErrorMessage (if the call @@ -442,7 +465,7 @@ QDBusMessage QDBusAbstractInterface::callWithArgumentList(QDBus::CallMode mode, QDBusMessagePrivate::setParametersValidated(msg, true); msg.setArguments(args); - QDBusMessage reply = d->connection.call(msg, mode); + QDBusMessage reply = d->connection.call(msg, mode, d->timeout); if (thread() == QThread::currentThread()) d->lastError = reply; // will clear if reply isn't an error @@ -475,7 +498,7 @@ QDBusPendingCall QDBusAbstractInterface::asyncCallWithArgumentList(const QString QDBusMessage msg = QDBusMessage::createMethodCall(service(), path(), interface(), method); QDBusMessagePrivate::setParametersValidated(msg, true); msg.setArguments(args); - return d->connection.asyncCall(msg); + return d->connection.asyncCall(msg, d->timeout); } /*! diff --git a/src/dbus/qdbusabstractinterface.h b/src/dbus/qdbusabstractinterface.h index 72b922e..34ff410 100644 --- a/src/dbus/qdbusabstractinterface.h +++ b/src/dbus/qdbusabstractinterface.h @@ -95,6 +95,9 @@ public: QDBusError lastError() const; + void setTimeout(int timeout); + int timeout() const; + QDBusMessage call(const QString &method, const QVariant &arg1 = QVariant(), const QVariant &arg2 = QVariant(), diff --git a/src/dbus/qdbusabstractinterface_p.h b/src/dbus/qdbusabstractinterface_p.h index a000daf..4f96165 100644 --- a/src/dbus/qdbusabstractinterface_p.h +++ b/src/dbus/qdbusabstractinterface_p.h @@ -77,6 +77,7 @@ public: QString path; QString interface; mutable QDBusError lastError; + int timeout; // this is set during creation and never changed // it can't be const because QDBusInterfacePrivate has one more check diff --git a/src/declarative/graphicsitems/qdeclarativetextinput.cpp b/src/declarative/graphicsitems/qdeclarativetextinput.cpp index 23c41e8..cc3f0b9 100644 --- a/src/declarative/graphicsitems/qdeclarativetextinput.cpp +++ b/src/declarative/graphicsitems/qdeclarativetextinput.cpp @@ -878,7 +878,8 @@ void QDeclarativeTextInputPrivate::updateInputMethodHints() \o TextInput.Normal - Displays the text as it is. (Default) \o TextInput.Password - Displays asterixes instead of characters. \o TextInput.NoEcho - Displays nothing. - \o TextInput.PasswordEchoOnEdit - Displays all but the current character as asterixes. + \o TextInput.PasswordEchoOnEdit - Displays characters as they are entered + while editing, otherwise displays asterisks. \endlist */ QDeclarativeTextInput::EchoMode QDeclarativeTextInput::echoMode() const diff --git a/src/declarative/util/qdeclarativeview.cpp b/src/declarative/util/qdeclarativeview.cpp index bab991b..45995ce 100644 --- a/src/declarative/util/qdeclarativeview.cpp +++ b/src/declarative/util/qdeclarativeview.cpp @@ -319,6 +319,8 @@ QDeclarativeView::~QDeclarativeView() Ensure that the URL provided is full and correct, in particular, use \l QUrl::fromLocalFile() when loading a file from the local filesystem. + + \sa {Network Transparency}{Loading Resources in QML} */ /*! diff --git a/src/gui/accessible/qaccessible_unix.cpp b/src/gui/accessible/qaccessible_unix.cpp index 19fbe78..1c1eb2a 100644 --- a/src/gui/accessible/qaccessible_unix.cpp +++ b/src/gui/accessible/qaccessible_unix.cpp @@ -96,7 +96,7 @@ void QAccessible::updateAccessibility(QObject *o, int who, Event reason) } initialize(); - if (bridges()->isEmpty()) + if (!bridges() || bridges()->isEmpty()) return; QAccessibleInterface *iface = QAccessible::queryAccessibleInterface(o); diff --git a/src/gui/accessible/qaccessible_win.cpp b/src/gui/accessible/qaccessible_win.cpp index 79ac442..caabae5 100644 --- a/src/gui/accessible/qaccessible_win.cpp +++ b/src/gui/accessible/qaccessible_win.cpp @@ -600,6 +600,35 @@ HRESULT STDMETHODCALLTYPE QWindowsEnumerate::Skip(unsigned long celt) return S_OK; } +struct AccessibleElement { + AccessibleElement(int entryId, QAccessibleInterface *accessible) { + if (entryId < 0) { + QPair<QObject*, int> ref = qAccessibleRecentSentEvents()->value(entryId); + iface = QAccessible::queryAccessibleInterface(ref.first); + entry = ref.second; + cleanupInterface = true; + } else { + iface = accessible; + entry = entryId; + cleanupInterface = false; + } + } + + QString text(QAccessible::Text t) const { + return iface ? iface->text(t, entry) : QString(); + } + + ~AccessibleElement() { + if (cleanupInterface) + delete iface; + } + + QAccessibleInterface *iface; + int entry; +private: + bool cleanupInterface; +}; + /* */ class QWindowsAccessible : public IAccessible, IOleWindow, QAccessible @@ -998,7 +1027,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::accLocation(long *pxLeft, long *py if (!accessible->isValid()) return E_FAIL; - QRect rect = accessible->rect(varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QRect rect = elem.iface ? elem.iface->rect(elem.entry) : QRect(); if (rect.isValid()) { *pxLeft = rect.x(); *pyTop = rect.y(); @@ -1101,25 +1131,12 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accChild(VARIANT varChildID, I int childIndex = varChildID.lVal; QAccessibleInterface *acc = 0; - if (childIndex < 0) { - const int entry = childIndex; - QPair<QObject*, int> ref = qAccessibleRecentSentEvents()->value(entry); - if (ref.first) { - acc = queryAccessibleInterface(ref.first); - if (acc && ref.second) { - if (ref.second) { - QAccessibleInterface *res; - int index = acc->navigate(Child, ref.second, &res); - delete acc; - if (index == -1) - return E_INVALIDARG; - acc = res; - } - } - } - } else { - RelationFlag rel = childIndex ? Child : Self; - accessible->navigate(rel, childIndex, &acc); + AccessibleElement elem(childIndex, accessible); + if (elem.iface) { + RelationFlag rel = elem.entry ? Child : Self; + int index = elem.iface->navigate(rel, elem.entry, &acc); + if (index == -1) + return E_INVALIDARG; } if (acc) { @@ -1171,7 +1188,9 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::accDoDefaultAction(VARIANT varID) if (!accessible->isValid()) return E_FAIL; - return accessible->doAction(DefaultAction, varID.lVal, QVariantList()) ? S_OK : S_FALSE; + AccessibleElement elem(varID.lVal, accessible); + const bool res = elem.iface ? elem.iface->doAction(DefaultAction, elem.entry, QVariantList()) : false; + return res ? S_OK : S_FALSE; } HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accDefaultAction(VARIANT varID, BSTR* pszDefaultAction) @@ -1180,7 +1199,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accDefaultAction(VARIANT varID if (!accessible->isValid()) return E_FAIL; - QString def = accessible->actionText(DefaultAction, Name, varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QString def = elem.iface ? elem.iface->actionText(DefaultAction, Name, elem.entry) : QString(); if (def.isEmpty()) { *pszDefaultAction = 0; return S_FALSE; @@ -1196,7 +1216,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accDescription(VARIANT varID, if (!accessible->isValid()) return E_FAIL; - QString descr = accessible->text(Description, varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QString descr = elem.text(Description); if (descr.size()) { *pszDescription = QStringToBSTR(descr); return S_OK; @@ -1212,7 +1233,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accHelp(VARIANT varID, BSTR *p if (!accessible->isValid()) return E_FAIL; - QString help = accessible->text(Help, varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QString help = elem.text(Help); if (help.size()) { *pszHelp = QStringToBSTR(help); return S_OK; @@ -1233,7 +1255,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accKeyboardShortcut(VARIANT va if (!accessible->isValid()) return E_FAIL; - QString sc = accessible->text(Accelerator, varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QString sc = elem.text(Accelerator); if (sc.size()) { *pszKeyboardShortcut = QStringToBSTR(sc); return S_OK; @@ -1249,7 +1272,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accName(VARIANT varID, BSTR* p if (!accessible->isValid()) return E_FAIL; - QString n = accessible->text(Name, varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QString n = elem.text(Name); if (n.size()) { *pszName = QStringToBSTR(n); return S_OK; @@ -1271,7 +1295,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accRole(VARIANT varID, VARIANT if (!accessible->isValid()) return E_FAIL; - Role role = accessible->role(varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + Role role = elem.iface ? elem.iface->role(elem.entry) : NoRole; if (role != NoRole) { if (role == LayeredPane) role = QAccessible::Pane; @@ -1290,7 +1315,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accState(VARIANT varID, VARIAN return E_FAIL; (*pvarState).vt = VT_I4; - (*pvarState).lVal = accessible->state(varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + (*pvarState).lVal = elem.iface ? elem.iface->state(elem.entry) : 0; return S_OK; } @@ -1300,7 +1326,8 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::get_accValue(VARIANT varID, BSTR* if (!accessible->isValid()) return E_FAIL; - QString value = accessible->text(Value, varID.lVal); + AccessibleElement elem(varID.lVal, accessible); + QString value = elem.text(Value); if (!value.isNull()) { *pszValue = QStringToBSTR(value); return S_OK; @@ -1324,19 +1351,23 @@ HRESULT STDMETHODCALLTYPE QWindowsAccessible::accSelect(long flagsSelect, VARIAN bool res = false; - if (flagsSelect & SELFLAG_TAKEFOCUS) - res = accessible->doAction(SetFocus, varID.lVal, QVariantList()); - if (flagsSelect & SELFLAG_TAKESELECTION) { - accessible->doAction(ClearSelection, 0, QVariantList()); - res = accessible->doAction(AddToSelection, varID.lVal, QVariantList()); + AccessibleElement elem(varID.lVal, accessible); + QAccessibleInterface *acc = elem.iface; + if (acc) { + const int entry = elem.entry; + if (flagsSelect & SELFLAG_TAKEFOCUS) + res = acc->doAction(SetFocus, entry, QVariantList()); + if (flagsSelect & SELFLAG_TAKESELECTION) { + acc->doAction(ClearSelection, 0, QVariantList()); //### bug, 0 should be entry?? + res = acc->doAction(AddToSelection, entry, QVariantList()); + } + if (flagsSelect & SELFLAG_EXTENDSELECTION) + res = acc->doAction(ExtendSelection, entry, QVariantList()); + if (flagsSelect & SELFLAG_ADDSELECTION) + res = acc->doAction(AddToSelection, entry, QVariantList()); + if (flagsSelect & SELFLAG_REMOVESELECTION) + res = acc->doAction(RemoveSelection, entry, QVariantList()); } - if (flagsSelect & SELFLAG_EXTENDSELECTION) - res = accessible->doAction(ExtendSelection, varID.lVal, QVariantList()); - if (flagsSelect & SELFLAG_ADDSELECTION) - res = accessible->doAction(AddToSelection, varID.lVal, QVariantList()); - if (flagsSelect & SELFLAG_REMOVESELECTION) - res = accessible->doAction(RemoveSelection, varID.lVal, QVariantList()); - return res ? S_OK : S_FALSE; } diff --git a/src/gui/dialogs/qfiledialog_win_p.h b/src/gui/dialogs/qfiledialog_win_p.h index 1ff29d2..1408057 100644 --- a/src/gui/dialogs/qfiledialog_win_p.h +++ b/src/gui/dialogs/qfiledialog_win_p.h @@ -240,4 +240,4 @@ DECLARE_INTERFACE_(IFileOpenDialog, IFileDialog) STDMETHOD(GetResults)(THIS_ IShellItemArray **ppenum) PURE; STDMETHOD(GetSelectedItems)(THIS_ IShellItemArray **ppsai) PURE; }; -#endif
\ No newline at end of file +#endif diff --git a/src/gui/embedded/qscreen_qws.cpp b/src/gui/embedded/qscreen_qws.cpp index 2c10357..b17ade0 100644 --- a/src/gui/embedded/qscreen_qws.cpp +++ b/src/gui/embedded/qscreen_qws.cpp @@ -1545,6 +1545,7 @@ QImage::Format QScreenPrivate::preferredImageFormat() const \value SvgalibClass QSvgalibScreen \value ProxyClass QProxyScreen \value GLClass QGLScreen + \value IntfbClass QIntfbScreen \value CustomClass Unknown QScreen subclass \sa classId() diff --git a/src/gui/image/qjpeghandler.cpp b/src/gui/image/qjpeghandler.cpp index 673a6d6..8fea456 100644 --- a/src/gui/image/qjpeghandler.cpp +++ b/src/gui/image/qjpeghandler.cpp @@ -74,6 +74,11 @@ extern "C" { #endif } +#if defined(JPEG_TRUE) && !defined(HAVE_BOOLEAN) +// this jpeglib.h uses JPEG_boolean +typedef JPEG_boolean boolean; +#endif + QT_BEGIN_NAMESPACE void QT_FASTCALL convert_rgb888_to_rgb32_C(quint32 *dst, const uchar *src, int len) diff --git a/src/gui/kernel/qapplication.cpp b/src/gui/kernel/qapplication.cpp index cd13894..15d37c3 100644 --- a/src/gui/kernel/qapplication.cpp +++ b/src/gui/kernel/qapplication.cpp @@ -3321,7 +3321,7 @@ bool QApplication::desktopSettingsAware() one of the above events. If no keys are being held Qt::NoModifier is returned. - \sa mouseButtons() + \sa mouseButtons(), queryKeyboardModifiers() */ Qt::KeyboardModifiers QApplication::keyboardModifiers() @@ -3330,6 +3330,25 @@ Qt::KeyboardModifiers QApplication::keyboardModifiers() } /*! + \fn Qt::KeyboardModifiers QApplication::queryKeyboardModifiers() + + Queries and returns the state of the modifier keys on the keyboard. + Unlike keyboardModifiers, this method returns the actual keys held + on the input device at the time of calling the method. + + It does not rely on the keypress events having been received by this + process, which makes it possible to check the modifiers while moving + a window, for instance. Note that in most cases, you should use + keyboardModifiers(), which is faster and more accurate since it contains + the state of the modifiers as they were when the currently processed + event was received. + + \sa keyboardModifiers() + + \since 4.8 +*/ + +/*! Returns the current state of the buttons on the mouse. The current state is updated syncronously as the event queue is emptied of events that will spontaneously change the mouse state (QEvent::MouseButtonPress and diff --git a/src/gui/kernel/qapplication.h b/src/gui/kernel/qapplication.h index 01a246a..1548849 100644 --- a/src/gui/kernel/qapplication.h +++ b/src/gui/kernel/qapplication.h @@ -198,6 +198,7 @@ public: static void alert(QWidget *widget, int duration = 0); static Qt::KeyboardModifiers keyboardModifiers(); + static Qt::KeyboardModifiers queryKeyboardModifiers(); static Qt::MouseButtons mouseButtons(); static void setDesktopSettingsAware(bool); diff --git a/src/gui/kernel/qapplication_mac.mm b/src/gui/kernel/qapplication_mac.mm index c5ff799..1f75f09 100644 --- a/src/gui/kernel/qapplication_mac.mm +++ b/src/gui/kernel/qapplication_mac.mm @@ -1395,6 +1395,11 @@ void QApplication::restoreOverrideCursor() } #endif // QT_NO_CURSOR +Qt::KeyboardModifiers QApplication::queryKeyboardModifiers() +{ + return qt_mac_get_modifiers(GetCurrentEventKeyModifiers()); +} + QWidget *QApplication::topLevelAt(const QPoint &p) { #ifndef QT_MAC_USE_COCOA diff --git a/src/gui/kernel/qapplication_qws.cpp b/src/gui/kernel/qapplication_qws.cpp index 3b6a075..193dfcd 100644 --- a/src/gui/kernel/qapplication_qws.cpp +++ b/src/gui/kernel/qapplication_qws.cpp @@ -2699,6 +2699,11 @@ void QApplication::alert(QWidget *, int) { } +Qt::KeyboardModifiers QApplication::queryKeyboardModifiers() +{ + return keyboardModifiers(); // TODO proper implementation +} + int QApplication::qwsProcessEvent(QWSEvent* event) { Q_D(QApplication); diff --git a/src/gui/kernel/qapplication_s60.cpp b/src/gui/kernel/qapplication_s60.cpp index c71b982..da1c778 100644 --- a/src/gui/kernel/qapplication_s60.cpp +++ b/src/gui/kernel/qapplication_s60.cpp @@ -115,6 +115,8 @@ QWidget *qt_button_down = 0; // widget got last button-down QSymbianControl *QSymbianControl::lastFocusedControl = 0; +static Qt::KeyboardModifiers app_keyboardModifiers = Qt::NoModifier; + QS60Data* qGlobalS60Data() { return qt_s60Data(); @@ -735,6 +737,7 @@ void QSymbianControl::HandlePointerEvent(const TPointerEvent& pEvent) Qt::MouseButton button; mapS60MouseEventTypeToQt(&type, &button, &pEvent); Qt::KeyboardModifiers modifiers = mapToQtModifiers(pEvent.iModifiers); + app_keyboardModifiers = modifiers; QPoint widgetPos = translatePointForFixedNativeOrientation(pEvent.iPosition); TPoint controlScreenPos = PositionRelativeToScreen(); @@ -2590,6 +2593,11 @@ void QApplication::setEffectEnabled(Qt::UIEffect /* effect */, bool /* enable */ // TODO: Implement QApplication::setEffectEnabled(Qt::UIEffect effect, bool enable) } +Qt::KeyboardModifiers QApplication::queryKeyboardModifiers() +{ + return app_keyboardModifiers; +} + TUint QApplicationPrivate::resolveS60ScanCode(TInt scanCode, TUint keysym) { if (!scanCode) diff --git a/src/gui/kernel/qapplication_win.cpp b/src/gui/kernel/qapplication_win.cpp index c34e75f..756cb56 100644 --- a/src/gui/kernel/qapplication_win.cpp +++ b/src/gui/kernel/qapplication_win.cpp @@ -1319,6 +1319,11 @@ Qt::KeyboardModifiers qt_win_getKeyboardModifiers() return modifiers; } +Qt::KeyboardModifiers QApplication::queryKeyboardModifiers() +{ + return qt_win_getKeyboardModifiers(); +} + /***************************************************************************** Routines to find a Qt widget from a screen position *****************************************************************************/ diff --git a/src/gui/kernel/qapplication_x11.cpp b/src/gui/kernel/qapplication_x11.cpp index 666fe85..ef8e2b8 100644 --- a/src/gui/kernel/qapplication_x11.cpp +++ b/src/gui/kernel/qapplication_x11.cpp @@ -3058,6 +3058,21 @@ void QApplicationPrivate::_q_alertTimeOut() } } +Qt::KeyboardModifiers QApplication::queryKeyboardModifiers() +{ + Window root; + Window child; + int root_x, root_y, win_x, win_y; + uint keybstate; + for (int i = 0; i < ScreenCount(X11->display); ++i) { + if (XQueryPointer(X11->display, QX11Info::appRootWindow(i), &root, &child, + &root_x, &root_y, &win_x, &win_y, &keybstate)) + return X11->translateModifiers(keybstate & 0x00ff); + } + return 0; + +} + /***************************************************************************** Special lookup functions for windows that have been reparented recently *****************************************************************************/ diff --git a/src/gui/kernel/qcocoaview_mac.mm b/src/gui/kernel/qcocoaview_mac.mm index e32fdeb..0fbae59 100644 --- a/src/gui/kernel/qcocoaview_mac.mm +++ b/src/gui/kernel/qcocoaview_mac.mm @@ -66,9 +66,14 @@ #include <qdebug.h> @interface NSEvent (Qt_Compile_Leopard_DeviceDelta) + // SnowLeopard: - (CGFloat)deviceDeltaX; - (CGFloat)deviceDeltaY; - (CGFloat)deviceDeltaZ; + // Lion: + - (CGFloat)scrollingDeltaX; + - (CGFloat)scrollingDeltaY; + - (CGFloat)scrollingDeltaZ; @end @interface NSEvent (Qt_Compile_Leopard_Gestures) @@ -614,7 +619,6 @@ static int qCocoaViewCount = 0; int deltaX = 0; int deltaY = 0; - int deltaZ = 0; const EventRef carbonEvent = (EventRef)[theEvent eventRef]; const UInt32 carbonEventKind = carbonEvent ? ::GetEventKind(carbonEvent) : 0; @@ -627,15 +631,20 @@ static int qCocoaViewCount = 0; // It looks like 1/4 degrees per pixel behaves most native. // (NB: Qt expects the unit for delta to be 8 per degree): const int pixelsToDegrees = 2; // 8 * 1/4 - deltaX = [theEvent deviceDeltaX] * pixelsToDegrees; - deltaY = [theEvent deviceDeltaY] * pixelsToDegrees; - deltaZ = [theEvent deviceDeltaZ] * pixelsToDegrees; + if (QSysInfo::MacintoshVersion <= QSysInfo::MV_10_6) { + // Mac OS 10.6 + deltaX = [theEvent deviceDeltaX] * pixelsToDegrees; + deltaY = [theEvent deviceDeltaY] * pixelsToDegrees; + } else { + // Mac OS 10.7+ + deltaX = [theEvent scrollingDeltaX] * pixelsToDegrees; + deltaY = [theEvent scrollingDeltaY] * pixelsToDegrees; + } } else { // carbonEventKind == kEventMouseWheelMoved // Remove acceleration, and use either -120 or 120 as delta: deltaX = qBound(-120, int([theEvent deltaX] * 10000), 120); deltaY = qBound(-120, int([theEvent deltaY] * 10000), 120); - deltaZ = qBound(-120, int([theEvent deltaZ] * 10000), 120); } #ifndef QT_NO_WHEELEVENT @@ -654,13 +663,6 @@ static int qCocoaViewCount = 0; qt_sendSpontaneousEvent(widgetToGetMouse, &qwe); } - if (deltaZ != 0) { - // Qt doesn't explicitly support wheels with a Z component. In a misguided attempt to - // try to be ahead of the pack, I'm adding this extra value. - QWheelEvent qwe(qlocal, qglobal, deltaZ, buttons, keyMods, (Qt::Orientation)3); - qt_sendSpontaneousEvent(widgetToGetMouse, &qwe); - } - if (deltaX != 0 && deltaY != 0) QMacScrollOptimization::performDelayedScroll(); #endif //QT_NO_WHEELEVENT diff --git a/src/gui/kernel/qdnd_x11.cpp b/src/gui/kernel/qdnd_x11.cpp index 0c683b4..5847021 100644 --- a/src/gui/kernel/qdnd_x11.cpp +++ b/src/gui/kernel/qdnd_x11.cpp @@ -1112,21 +1112,6 @@ void qt_xdnd_send_leave() waiting_for_status = false; } -// TODO: remove and use QApplication::currentKeyboardModifiers() in Qt 4.8. -static Qt::KeyboardModifiers currentKeyboardModifiers() -{ - Window root; - Window child; - int root_x, root_y, win_x, win_y; - uint keybstate; - for (int i = 0; i < ScreenCount(X11->display); ++i) { - if (XQueryPointer(X11->display, QX11Info::appRootWindow(i), &root, &child, - &root_x, &root_y, &win_x, &win_y, &keybstate)) - return X11->translateModifiers(keybstate & 0x00ff); - } - return 0; -} - void QX11Data::xdndHandleDrop(QWidget *, const XEvent * xe, bool passive) { DEBUG("xdndHandleDrop"); @@ -1183,7 +1168,7 @@ void QX11Data::xdndHandleDrop(QWidget *, const XEvent * xe, bool passive) // Drop coming from another app? Update keyboard modifiers. if (!qt_xdnd_dragging) { - QApplicationPrivate::modifier_buttons = currentKeyboardModifiers(); + QApplicationPrivate::modifier_buttons = QApplication::queryKeyboardModifiers(); } QDropEvent de(qt_xdnd_current_position, possible_actions, dropData, diff --git a/src/gui/painting/qcosmeticstroker.cpp b/src/gui/painting/qcosmeticstroker.cpp index dbe957e..3528e6f 100644 --- a/src/gui/painting/qcosmeticstroker.cpp +++ b/src/gui/painting/qcosmeticstroker.cpp @@ -425,13 +425,12 @@ void QCosmeticStroker::calculateLastPoint(qreal rx1, qreal ry1, qreal rx2, qreal swapped = true; qSwap(y1, y2); qSwap(x1, x2); - --x1; --x2; --y1; --y2; } int xinc = F16Dot16FixedDiv(x2 - x1, y2 - y1); int x = x1 << 10; - int y = (y1+32) >> 6; - int ys = (y2+32) >> 6; + int y = y1 >> 6; + int ys = y2 >> 6; if (y != ys) { x += ( ((((y << 6) + 32 - y1))) * xinc ) >> 6; @@ -457,13 +456,12 @@ void QCosmeticStroker::calculateLastPoint(qreal rx1, qreal ry1, qreal rx2, qreal swapped = true; qSwap(x1, x2); qSwap(y1, y2); - --x1; --x2; --y1; --y2; } int yinc = F16Dot16FixedDiv(y2 - y1, x2 - x1); int y = y1 << 10; - int x = (x1+32) >> 6; - int xs = (x2+32) >> 6; + int x = x1 >> 6; + int xs = x2 >> 6; if (x != xs) { y += ( ((((x << 6) + 32 - x1))) * yinc ) >> 6; @@ -716,10 +714,11 @@ static void drawLine(QCosmeticStroker *stroker, qreal rx1, qreal ry1, qreal rx2, QCosmeticStroker::Point last = stroker->lastPixel; -// qDebug() << "stroke" << x1/64. << y1/64. << x2/64. << y2/64. << capString(caps); +// qDebug() << "stroke" << x1/64. << y1/64. << x2/64. << y2/64.; if (dx < dy) { // vertical + QCosmeticStroker::Direction dir = QCosmeticStroker::TopToBottom; bool swapped = false; if (y1 > y2) { @@ -727,30 +726,31 @@ static void drawLine(QCosmeticStroker *stroker, qreal rx1, qreal ry1, qreal rx2, qSwap(y1, y2); qSwap(x1, x2); caps = swapCaps(caps); - --x1; --x2; --y1; --y2; + dir = QCosmeticStroker::BottomToTop; } int xinc = F16Dot16FixedDiv(x2 - x1, y2 - y1); int x = x1 << 10; + if ((stroker->lastDir ^ QCosmeticStroker::VerticalMask) == dir) + caps |= swapped ? QCosmeticStroker::CapEnd : QCosmeticStroker::CapBegin; + capAdjust(caps, y1, y2, x, xinc); - int y = (y1+32) >> 6; - int ys = (y2+32) >> 6; + int y = y1 >> 6; + int ys = y2 >> 6; if (y != ys) { x += ( ((((y << 6) + 32 - y1))) * xinc ) >> 6; // calculate first and last pixel and perform dropout control - QCosmeticStroker::Direction dir = QCosmeticStroker::TopToBottom; QCosmeticStroker::Point first; first.x = x >> 16; first.y = y; last.x = (x + (ys - y - 1)*xinc) >> 16; last.y = ys - 1; - if (swapped) { + if (swapped) qSwap(first, last); - dir = QCosmeticStroker::BottomToTop; - } + bool axisAligned = qAbs(xinc) < (1 << 14); if (stroker->lastPixel.x >= 0) { if (first.x == stroker->lastPixel.x && @@ -765,7 +765,7 @@ static void drawLine(QCosmeticStroker *stroker, qreal rx1, qreal ry1, qreal rx2, } else if (stroker->lastDir != dir && (((axisAligned && stroker->lastAxisAligned) && stroker->lastPixel.x != first.x && stroker->lastPixel.y != first.y) || - (qAbs(stroker->lastPixel.x - first.x) > 1 && + (qAbs(stroker->lastPixel.x - first.x) > 1 || qAbs(stroker->lastPixel.y - first.y) > 1))) { // have a missing pixel, insert it if (swapped) { @@ -793,37 +793,39 @@ static void drawLine(QCosmeticStroker *stroker, qreal rx1, qreal ry1, qreal rx2, if (!dx) return; + QCosmeticStroker::Direction dir = QCosmeticStroker::LeftToRight; + bool swapped = false; if (x1 > x2) { swapped = true; qSwap(x1, x2); qSwap(y1, y2); caps = swapCaps(caps); - --x1; --x2; --y1; --y2; + dir = QCosmeticStroker::RightToLeft; } int yinc = F16Dot16FixedDiv(y2 - y1, x2 - x1); int y = y1 << 10; - capAdjust(caps, x1, x2, y, yinc); + if ((stroker->lastDir ^ QCosmeticStroker::HorizontalMask) == dir) + caps |= swapped ? QCosmeticStroker::CapEnd : QCosmeticStroker::CapBegin; - int x = (x1+32) >> 6; - int xs = (x2+32) >> 6; + capAdjust(caps, x1, x2, y, yinc); + int x = x1 >> 6; + int xs = x2 >> 6; if (x != xs) { y += ( ((((x << 6) + 32 - x1))) * yinc ) >> 6; // calculate first and last pixel to perform dropout control - QCosmeticStroker::Direction dir = QCosmeticStroker::LeftToRight; QCosmeticStroker::Point first; first.x = x; first.y = y >> 16; last.x = xs - 1; last.y = (y + (xs - x - 1)*yinc) >> 16; - if (swapped) { + if (swapped) qSwap(first, last); - dir = QCosmeticStroker::RightToLeft; - } + bool axisAligned = qAbs(yinc) < (1 << 14); if (stroker->lastPixel.x >= 0) { if (first.x == stroker->lastPixel.x && first.y == stroker->lastPixel.y) { @@ -837,7 +839,7 @@ static void drawLine(QCosmeticStroker *stroker, qreal rx1, qreal ry1, qreal rx2, } else if (stroker->lastDir != dir && (((axisAligned && stroker->lastAxisAligned) && stroker->lastPixel.x != first.x && stroker->lastPixel.y != first.y) || - (qAbs(stroker->lastPixel.x - first.x) > 1 && + (qAbs(stroker->lastPixel.x - first.x) > 1 || qAbs(stroker->lastPixel.y - first.y) > 1))) { // have a missing pixel, insert it if (swapped) { diff --git a/src/gui/painting/qcosmeticstroker_p.h b/src/gui/painting/qcosmeticstroker_p.h index d7bd79a..53cdf2c 100644 --- a/src/gui/painting/qcosmeticstroker_p.h +++ b/src/gui/painting/qcosmeticstroker_p.h @@ -78,10 +78,12 @@ public: // used to avoid drop outs or duplicated points enum Direction { - TopToBottom, - BottomToTop, - LeftToRight, - RightToLeft + TopToBottom = 0x1, + BottomToTop = 0x2, + LeftToRight = 0x4, + RightToLeft = 0x8, + VerticalMask = 0x3, + HorizontalMask = 0xc }; QCosmeticStroker(QRasterPaintEngineState *s, const QRect &dr) diff --git a/src/gui/painting/qpaintengine_raster.cpp b/src/gui/painting/qpaintengine_raster.cpp index 76d7316..9826689 100644 --- a/src/gui/painting/qpaintengine_raster.cpp +++ b/src/gui/painting/qpaintengine_raster.cpp @@ -3098,7 +3098,7 @@ void QRasterPaintEngine::drawTextItem(const QPointF &p, const QTextItem &textIte ensurePen(); ensureState(); -#if defined (Q_WS_WIN) || defined(Q_WS_MAC) +#if defined (Q_WS_WIN) || defined(Q_WS_MAC) || (defined(Q_OS_MAC) && defined(Q_WS_QPA)) if (!supportsTransformations(ti.fontEngine)) { QVarLengthArray<QFixedPoint> positions; @@ -3438,7 +3438,7 @@ bool QRasterPaintEngine::supportsTransformations(const QFontEngine *fontEngine) bool QRasterPaintEngine::supportsTransformations(qreal pixelSize, const QTransform &m) const { -#if defined(Q_WS_MAC) +#if defined(Q_WS_MAC) || (defined(Q_OS_MAC) && defined(Q_WS_QPA)) // Mac font engines don't support scaling and rotation if (m.type() > QTransform::TxTranslate) #else diff --git a/src/gui/painting/qpainter.cpp b/src/gui/painting/qpainter.cpp index 8e64f3b..efb016e 100644 --- a/src/gui/painting/qpainter.cpp +++ b/src/gui/painting/qpainter.cpp @@ -5792,16 +5792,19 @@ void QPainter::drawImage(const QRectF &targetRect, const QImage &image, const QR d->engine->drawImage(QRectF(x, y, w, h), image, QRectF(sx, sy, sw, sh), flags); } +#if !defined(QT_NO_RAWFONT) /*! - Draws the glyphs represented by \a glyphs at \a position. The \a position gives the - edge of the baseline for the string of glyphs. The glyphs will be retrieved from the font - selected on \a glyphs and at offsets given by the positions in \a glyphs. + \fn void QPainter::drawGlyphRun(const QPointF &position, const QGlyphRun &glyphs) + + Draws the specified \a glyphs at the given \a position. + The \a position gives the edge of the baseline for the string of glyphs. + The glyphs will be retrieved from the font selected by \a glyphs and at + offsets given by the positions in \a glyphs. \since 4.8 \sa QGlyphRun::setRawFont(), QGlyphRun::setPositions(), QGlyphRun::setGlyphIndexes() */ -#if !defined(QT_NO_RAWFONT) void QPainter::drawGlyphRun(const QPointF &position, const QGlyphRun &glyphRun) { Q_D(QPainter); @@ -9251,9 +9254,9 @@ void QPainter::drawPixmapFragments(const PixmapFragment *fragments, int fragment \since 4.8 This function is used to draw the same \a pixmap with multiple target - and source rectangles. If \a sourceRects is 0, the whole pixmap will be - rendered at each of the target rectangles. The \a hints parameter can be - used to pass in drawing hints. + and source rectangles specified by \a targetRects. If \a sourceRects is 0, + the whole pixmap will be rendered at each of the target rectangles. + The \a hints parameter can be used to pass in drawing hints. This function is potentially faster than multiple calls to drawPixmap(), since the backend can optimize state changes. diff --git a/src/gui/painting/qwindowsurface_raster.cpp b/src/gui/painting/qwindowsurface_raster.cpp index d972384..15ff044 100644 --- a/src/gui/painting/qwindowsurface_raster.cpp +++ b/src/gui/painting/qwindowsurface_raster.cpp @@ -229,7 +229,6 @@ void QRasterWindowSurface::flush(QWidget *widget, const QRegion &rgn, const QPoi QRegion wrgn(rgn); if (!wOffset.isNull()) wrgn.translate(-wOffset); - QRect wbr = wrgn.boundingRect(); if (wrgn.rectCount() != 1) { int num; @@ -237,23 +236,25 @@ void QRasterWindowSurface::flush(QWidget *widget, const QRegion &rgn, const QPoi XSetClipRectangles(X11->display, d_ptr->gc, 0, 0, rects, num, YXBanded); } - QRect br = rgn.boundingRect().translated(offset); + QPoint widgetOffset = offset + wOffset; + QRect clipRect = widget->rect().translated(widgetOffset).intersected(d_ptr->image->image.rect()); + + QRect br = rgn.boundingRect().translated(offset).intersected(clipRect); + QPoint wpos = br.topLeft() - widgetOffset; + #ifndef QT_NO_MITSHM if (d_ptr->image->xshmpm) { XCopyArea(X11->display, d_ptr->image->xshmpm, widget->handle(), d_ptr->gc, - br.x(), br.y(), br.width(), br.height(), wbr.x(), wbr.y()); + br.x(), br.y(), br.width(), br.height(), wpos.x(), wpos.y()); d_ptr->needsSync = true; } else if (d_ptr->image->xshmimg) { - const QImage &src = d->image->image; - br = br.intersected(src.rect()); XShmPutImage(X11->display, widget->handle(), d_ptr->gc, d_ptr->image->xshmimg, - br.x(), br.y(), wbr.x(), wbr.y(), br.width(), br.height(), False); + br.x(), br.y(), wpos.x(), wpos.y(), br.width(), br.height(), False); d_ptr->needsSync = true; } else #endif { const QImage &src = d->image->image; - br = br.intersected(src.rect()); if (src.format() != QImage::Format_RGB32 || widget->x11Info().depth() < 24) { Q_ASSERT(src.depth() >= 16); const QImage sub_src(src.scanLine(br.y()) + br.x() * (uint(src.depth()) / 8), @@ -262,11 +263,11 @@ void QRasterWindowSurface::flush(QWidget *widget, const QRegion &rgn, const QPoi data->xinfo = widget->x11Info(); data->fromImage(sub_src, Qt::NoOpaqueDetection); QPixmap pm = QPixmap(data); - XCopyArea(X11->display, pm.handle(), widget->handle(), d_ptr->gc, 0 , 0 , br.width(), br.height(), wbr.x(), wbr.y()); + XCopyArea(X11->display, pm.handle(), widget->handle(), d_ptr->gc, 0 , 0 , br.width(), br.height(), wpos.x(), wpos.y()); } else { // qpaintengine_x11.cpp extern void qt_x11_drawImage(const QRect &rect, const QPoint &pos, const QImage &image, Drawable hd, GC gc, Display *dpy, Visual *visual, int depth); - qt_x11_drawImage(br, wbr.topLeft(), src, widget->handle(), d_ptr->gc, X11->display, (Visual *)widget->x11Info().visual(), widget->x11Info().depth()); + qt_x11_drawImage(br, wpos, src, widget->handle(), d_ptr->gc, X11->display, (Visual *)widget->x11Info().visual(), widget->x11Info().depth()); } } @@ -311,7 +312,7 @@ void QRasterWindowSurface::flush(QWidget *widget, const QRegion &rgn, const QPoi } CGContextClip(context); - QRect r = rgn.boundingRect(); + QRect r = rgn.boundingRect().intersected(d->image->image.rect()); const CGRect area = CGRectMake(r.x(), r.y(), r.width(), r.height()); CGImageRef image = CGBitmapContextCreateImage(d->image->cg); CGImageRef subImage = CGImageCreateWithImageInRect(image, area); diff --git a/src/gui/styles/qmacstyle_mac.mm b/src/gui/styles/qmacstyle_mac.mm index 8436856..1c1713c 100644 --- a/src/gui/styles/qmacstyle_mac.mm +++ b/src/gui/styles/qmacstyle_mac.mm @@ -1063,7 +1063,7 @@ bool qt_mac_buttonIsRenderedFlat(const QPushButton *pushButton, const QStyleOpti { QMacStyle *macStyle = qobject_cast<QMacStyle *>(pushButton->style()); if (!macStyle) - return false; + return true; // revert to 'flat' behavior if not Mac style HIThemeButtonDrawInfo bdi; macStyle->d->initHIThemePushButton(option, pushButton, kThemeStateActive, &bdi); return bdi.kind == kThemeBevelButton; diff --git a/src/gui/styles/qwindowsstyle.cpp b/src/gui/styles/qwindowsstyle.cpp index c099273..9732c7e 100644 --- a/src/gui/styles/qwindowsstyle.cpp +++ b/src/gui/styles/qwindowsstyle.cpp @@ -177,11 +177,14 @@ bool QWindowsStyle::eventFilter(QObject *o, QEvent *e) // Alt has been pressed - find all widgets that care QList<QWidget *> l = widget->findChildren<QWidget *>(); - for (int pos=0 ; pos < l.size() ; ++pos) { + for (int pos=0 ; pos < l.size() ;) { QWidget *w = l.at(pos); if (w->isWindow() || !w->isVisible() || - w->style()->styleHint(SH_UnderlineShortcut, 0, w)) + w->style()->styleHint(SH_UnderlineShortcut, 0, w)) { l.removeAt(pos); + continue; + } + pos++; } // Update states before repainting d->seenAlt.append(widget); diff --git a/src/gui/text/qfont.cpp b/src/gui/text/qfont.cpp index 2d6af3b..2df88e2 100644 --- a/src/gui/text/qfont.cpp +++ b/src/gui/text/qfont.cpp @@ -919,8 +919,9 @@ QString QFont::styleName() const /*! \since 4.8 - Sets the style name of the font. When set, other style properties - like \a style() and \a weight() will be ignored for font matching. + Sets the style name of the font to the given \a styleName. + When set, other style properties like style() and weight() will be ignored + for font matching. \sa styleName() */ diff --git a/src/gui/text/qfontdatabase.cpp b/src/gui/text/qfontdatabase.cpp index 79503f9..1d463c4 100644 --- a/src/gui/text/qfontdatabase.cpp +++ b/src/gui/text/qfontdatabase.cpp @@ -1943,8 +1943,9 @@ bool QFontDatabase::isScalable(const QString &family, /*! - Returns a list of the point sizes available for the font that has - family \a family and style \a style. The list may be empty. + \fn QList<int> QFontDatabase::pointSizes(const QString &family, const QString &style) + Returns a list of the point sizes available for the font with the + given \a family and \a style. The list may be empty. \sa smoothSizes(), standardSizes() */ @@ -2052,8 +2053,9 @@ QFont QFontDatabase::font(const QString &family, const QString &style, /*! - Returns the point sizes of a font that has family \a family and - style \a style that will look attractive. The list may be empty. + \fn QList<int> QFontDatabase::smoothSizes(const QString &family, const QString &style) + Returns the point sizes of a font with the given \a family and \a style + that will look attractive. The list may be empty. For non-scalable fonts and bitmap scalable fonts, this function is equivalent to pointSizes(). diff --git a/src/gui/text/qfontengine_coretext.mm b/src/gui/text/qfontengine_coretext.mm index 64d4a24..153451e 100644 --- a/src/gui/text/qfontengine_coretext.mm +++ b/src/gui/text/qfontengine_coretext.mm @@ -135,7 +135,7 @@ void QCoreTextFontEngineMulti::init(bool kerning) attributeDict = CFDictionaryCreateMutable(0, 2, &kCFTypeDictionaryKeyCallBacks, &kCFTypeDictionaryValueCallBacks); - CFDictionaryAddValue(attributeDict, NSFontAttributeName, ctfont); + CFDictionaryAddValue(attributeDict, kCTFontAttributeName, ctfont); if (!kerning) { float zero = 0.0; QCFType<CFNumberRef> noKern = CFNumberCreate(kCFAllocatorDefault, kCFNumberFloatType, &zero); @@ -257,7 +257,7 @@ bool QCoreTextFontEngineMulti::stringToCMap(const QChar *str, int len, QGlyphLay //NSLog(@"Dictionary %@", runAttribs); if (!runAttribs) runAttribs = attributeDict; - CTFontRef runFont = static_cast<CTFontRef>(CFDictionaryGetValue(runAttribs, NSFontAttributeName)); + CTFontRef runFont = static_cast<CTFontRef>(CFDictionaryGetValue(runAttribs, kCTFontAttributeName)); uint fontIndex = fontIndexForFont(runFont); const QFontEngine *engine = engineAt(fontIndex); fontIndex <<= 24; @@ -547,7 +547,6 @@ glyph_metrics_t QCoreTextFontEngine::boundingBox(glyph_t glyph) ret.xoff = ret.xoff.round(); ret.yoff = ret.yoff.round(); } - return ret; } @@ -723,7 +722,12 @@ QImage QCoreTextFontEngine::imageForGlyph(glyph_t glyph, QFixed subPixelPosition QImage im(qRound(br.width) + 2, qRound(br.height) + 2, QImage::Format_RGB32); im.fill(0); - CGColorSpaceRef colorspace = CGColorSpaceCreateWithName(kCGColorSpaceGenericRGB); + CGColorSpaceRef colorspace = +#ifdef Q_WS_MAC + CGColorSpaceCreateWithName(kCGColorSpaceGenericRGB); +#else + CGColorSpaceCreateDeviceRGB(); +#endif uint cgflags = kCGImageAlphaNoneSkipFirst; #ifdef kCGBitmapByteOrder32Host //only needed because CGImage.h added symbols in the minor version cgflags |= kCGBitmapByteOrder32Host; diff --git a/src/gui/text/qfontengine_coretext_p.h b/src/gui/text/qfontengine_coretext_p.h index efe8295..0a2ae1f 100644 --- a/src/gui/text/qfontengine_coretext_p.h +++ b/src/gui/text/qfontengine_coretext_p.h @@ -44,6 +44,12 @@ #include <private/qfontengine_p.h> +#ifdef QT_NO_CORESERVICES +#include <CoreText/CoreText.h> +#include <CoreGraphics/CoreGraphics.h> +#include <private/qcore_mac_p.h> +#endif + #if !defined(Q_WS_MAC) || (MAC_OS_X_VERSION_MAX_ALLOWED >= MAC_OS_X_VERSION_10_5) class QRawFontPrivate; diff --git a/src/gui/text/qfontmetrics.cpp b/src/gui/text/qfontmetrics.cpp index f3d4107..1d93d54 100644 --- a/src/gui/text/qfontmetrics.cpp +++ b/src/gui/text/qfontmetrics.cpp @@ -442,9 +442,10 @@ bool QFontMetrics::inFont(QChar ch) const } /*! + \fn bool QFontMetrics::inFontUcs4(uint character) const \since 4.8 - Returns true if the character encoded in UCS-4/UTF-32 is a valid + Returns true if the given \a character encoded in UCS-4/UTF-32 is a valid character in the font; otherwise returns false. */ bool QFontMetrics::inFontUcs4(uint ucs4) const diff --git a/src/gui/text/qglyphrun.cpp b/src/gui/text/qglyphrun.cpp index 2865d91..442f7cc 100644 --- a/src/gui/text/qglyphrun.cpp +++ b/src/gui/text/qglyphrun.cpp @@ -175,7 +175,8 @@ QRawFont QGlyphRun::rawFont() const } /*! - Sets the font in which to look up the glyph indexes to \a font. + Sets the font specified by \a rawFont to be the font used to look up the + glyph indexes. \sa rawFont(), setGlyphIndexes() */ diff --git a/src/gui/text/qplatformfontdatabase_qpa.cpp b/src/gui/text/qplatformfontdatabase_qpa.cpp index d1d1f94..e3eeca5 100644 --- a/src/gui/text/qplatformfontdatabase_qpa.cpp +++ b/src/gui/text/qplatformfontdatabase_qpa.cpp @@ -160,6 +160,9 @@ QSupportedWritingSystems::QSupportedWritingSystems(const QSupportedWritingSystem d->ref.ref(); } +/*! + Assigns the \a other supported writing systems object to this object. +*/ QSupportedWritingSystems &QSupportedWritingSystems::operator=(const QSupportedWritingSystems &other) { if (d != other.d) { @@ -171,6 +174,9 @@ QSupportedWritingSystems &QSupportedWritingSystems::operator=(const QSupportedWr return *this; } +/*! + Destroys the object. +*/ QSupportedWritingSystems::~QSupportedWritingSystems() { if (!d->ref.deref()) @@ -187,12 +193,26 @@ void QSupportedWritingSystems::detach() } } +/*! + Sets the supported state of the writing system given by \a writingSystem to + the value specified by \a support. A value of true indicates that the + writing system is supported; a value of false indicates that it is + unsupported. + + \sa supported() +*/ void QSupportedWritingSystems::setSupported(QFontDatabase::WritingSystem writingSystem, bool support) { detach(); d->vector[writingSystem] = support; } +/*! + Returns true if the writing system given by \a writingSystem is supported; + otherwise returns false. + + \sa setSupported() +*/ bool QSupportedWritingSystems::supported(QFontDatabase::WritingSystem writingSystem) const { return d->vector.at(writingSystem); @@ -295,7 +315,7 @@ QStringList QPlatformFontDatabase::addApplicationFont(const QByteArray &fontData } /*! - + Releases the font handle and deletes any associated data loaded from a file. */ void QPlatformFontDatabase::releaseHandle(void *handle) { @@ -304,7 +324,13 @@ void QPlatformFontDatabase::releaseHandle(void *handle) } /*! + Returns the path to the font directory. + + The font directory is stored in the general Qt settings unless it has been + overridden by the \c QT_QPA_FONTDIR environment variable. + When using builds of Qt that do not support settings, the \c QT_QPA_FONTDIR + environment variable is the only way to specify the font directory. */ QString QPlatformFontDatabase::fontDir() const { diff --git a/src/gui/text/qrawfont.cpp b/src/gui/text/qrawfont.cpp index e3e5c57..60a6cb3 100644 --- a/src/gui/text/qrawfont.cpp +++ b/src/gui/text/qrawfont.cpp @@ -485,7 +485,8 @@ QVector<quint32> QRawFont::glyphIndexesForString(const QString &text) const must be at least \a numChars, if that's still not enough, this function will return false, then you can resize \a glyphIndexes from the size returned in \a numGlyphs. - \sa glyphIndexesForString(), advancesForGlyphIndexes(), QGlyphs, QTextLayout::glyphs(), QTextFragment::glyphs() + \sa glyphIndexesForString(), advancesForGlyphIndexes(), QGlyphRun, + QTextLayout::glyphRuns(), QTextFragment::glyphRuns() */ bool QRawFont::glyphIndexesForChars(const QChar *chars, int numChars, quint32 *glyphIndexes, int *numGlyphs) const { diff --git a/src/gui/text/qtextengine.cpp b/src/gui/text/qtextengine.cpp index 093b43d..aa4a20d 100644 --- a/src/gui/text/qtextengine.cpp +++ b/src/gui/text/qtextengine.cpp @@ -1532,33 +1532,38 @@ void QTextEngine::itemize() const const ushort *e = uc + length; int lastScript = QUnicodeTables::Common; while (uc < e) { - int script = QUnicodeTables::script(*uc); - if (script == QUnicodeTables::Inherited) - script = lastScript; - analysis->flags = QScriptAnalysis::None; - if (*uc == QChar::ObjectReplacementCharacter) { - if (analysis->bidiLevel % 2) - --analysis->bidiLevel; + switch (*uc) { + case QChar::ObjectReplacementCharacter: analysis->script = QUnicodeTables::Common; analysis->flags = QScriptAnalysis::Object; - } else if (*uc == QChar::LineSeparator) { + break; + case QChar::LineSeparator: if (analysis->bidiLevel % 2) --analysis->bidiLevel; analysis->script = QUnicodeTables::Common; analysis->flags = QScriptAnalysis::LineOrParagraphSeparator; if (option.flags() & QTextOption::ShowLineAndParagraphSeparators) *const_cast<ushort*>(uc) = 0x21B5; // visual line separator - } else if (*uc == 9) { + break; + case 9: // Tab analysis->script = QUnicodeTables::Common; analysis->flags = QScriptAnalysis::Tab; analysis->bidiLevel = control.baseLevel(); - } else if ((*uc == 32 || *uc == QChar::Nbsp) - && (option.flags() & QTextOption::ShowTabsAndSpaces)) { - analysis->script = QUnicodeTables::Common; - analysis->flags = QScriptAnalysis::Space; - analysis->bidiLevel = control.baseLevel(); - } else { - analysis->script = script; + break; + case 32: // Space + case QChar::Nbsp: + if (option.flags() & QTextOption::ShowTabsAndSpaces) { + analysis->script = QUnicodeTables::Common; + analysis->flags = QScriptAnalysis::Space; + analysis->bidiLevel = control.baseLevel(); + break; + } + // fall through + default: + int script = QUnicodeTables::script(*uc); + analysis->script = script == QUnicodeTables::Inherited ? lastScript : script; + analysis->flags = QScriptAnalysis::None; + break; } lastScript = analysis->script; ++uc; @@ -2082,7 +2087,8 @@ void QTextEngine::justify(const QScriptLine &line) } } - QFixed need = line.width - line.textWidth; + QFixed leading = leadingSpaceWidth(line); + QFixed need = line.width - line.textWidth - leading; if (need < 0) { // line overflows already! const_cast<QScriptLine &>(line).justified = true; @@ -2426,7 +2432,7 @@ void QTextEngine::indexAdditionalFormats() between the text that gets truncated and the ellipsis. This is important to get correctly shaped results for arabic text. */ -static bool nextCharJoins(const QString &string, int pos) +static inline bool nextCharJoins(const QString &string, int pos) { while (pos < string.length() && string.at(pos).category() == QChar::Mark_NonSpacing) ++pos; @@ -2435,13 +2441,14 @@ static bool nextCharJoins(const QString &string, int pos) return string.at(pos).joining() != QChar::OtherJoining; } -static bool prevCharJoins(const QString &string, int pos) +static inline bool prevCharJoins(const QString &string, int pos) { while (pos > 0 && string.at(pos - 1).category() == QChar::Mark_NonSpacing) --pos; if (pos == 0) return false; - return (string.at(pos - 1).joining() == QChar::Dual || string.at(pos - 1).joining() == QChar::Center); + QChar::Joining joining = string.at(pos - 1).joining(); + return (joining == QChar::Dual || joining == QChar::Center); } QString QTextEngine::elidedText(Qt::TextElideMode mode, const QFixed &width, int flags) const diff --git a/src/gui/text/qtextlayout.cpp b/src/gui/text/qtextlayout.cpp index 515915a..4fd6ddf 100644 --- a/src/gui/text/qtextlayout.cpp +++ b/src/gui/text/qtextlayout.cpp @@ -1928,12 +1928,8 @@ found: if (line.textWidth > 0 && item < eng->layoutData->items.size()) eng->maxWidth += lbh.spaceData.textWidth; - // In the latter case, text are drawn with trailing spaces at the beginning - // of a line, so the naturalTextWidth should contain the space width - if ((eng->option.flags() & QTextOption::IncludeTrailingSpaces) || - (line.width == QFIXED_MAX && eng->isRightToLeft())) { + if (eng->option.flags() & QTextOption::IncludeTrailingSpaces) line.textWidth += lbh.spaceData.textWidth; - } if (lbh.spaceData.length) { line.length += lbh.spaceData.length; line.hasTrailingSpaces = true; diff --git a/src/gui/text/text.pri b/src/gui/text/text.pri index b6cdc52..1cfacf7 100644 --- a/src/gui/text/text.pri +++ b/src/gui/text/text.pri @@ -106,14 +106,17 @@ unix:x11 { !embedded:!qpa:!x11:mac { HEADERS += \ text/qfontengine_mac_p.h - OBJECTIVE_HEADERS += \ - text/qfontengine_coretext_p.h SOURCES += \ text/qfont_mac.cpp \ text/qrawfont_mac.cpp OBJECTIVE_SOURCES += \ - text/qfontengine_coretext.mm \ text/qfontengine_mac.mm +} +!embedded:!x11:mac { + OBJECTIVE_HEADERS += \ + text/qfontengine_coretext_p.h + OBJECTIVE_SOURCES += \ + text/qfontengine_coretext.mm contains(QT_CONFIG, harfbuzz) { DEFINES += QT_ENABLE_HARFBUZZ_FOR_MAC } diff --git a/src/imports/imports.pro b/src/imports/imports.pro index c1298e2..d0e24b0 100644 --- a/src/imports/imports.pro +++ b/src/imports/imports.pro @@ -1,5 +1,5 @@ TEMPLATE = subdirs SUBDIRS += folderlistmodel particles gestures -contains(QT_CONFIG, opengl): SUBDIRS += shaders +contains(QT_CONFIG, opengl):!contains(QT_CONFIG, opengles1): SUBDIRS += shaders diff --git a/src/imports/shaders/shadereffectitem.cpp b/src/imports/shaders/shadereffectitem.cpp index 04c81f5..b954e5a 100755 --- a/src/imports/shaders/shadereffectitem.cpp +++ b/src/imports/shaders/shadereffectitem.cpp @@ -254,11 +254,6 @@ ShaderEffectItem::~ShaderEffectItem() */ -/*! - \property ShaderEffectItem::fragmentShader - \brief the OpenGL fragment shader code. -*/ - void ShaderEffectItem::setFragmentShader(const QString &code) { if (m_fragment_code.constData() == code.constData()) @@ -292,11 +287,6 @@ void ShaderEffectItem::setFragmentShader(const QString &code) */ -/*! - \property ShaderEffectItem::vertexShader - \brief the OpenGL vertex shader code. -*/ - void ShaderEffectItem::setVertexShader(const QString &code) { if (m_vertex_code.constData() == code.constData()) @@ -331,11 +321,6 @@ void ShaderEffectItem::setVertexShader(const QString &code) The default value is true. */ -/*! - \property ShaderEffectItem::blending - \brief the drawing is done using blending. -*/ - void ShaderEffectItem::setBlending(bool enable) { if (m_blending == enable) @@ -358,11 +343,6 @@ void ShaderEffectItem::setBlending(bool enable) The default value is QSize(1,1). */ -/*! - \property ShaderEffectItem::meshResolution - \brief the amount of triangles in the mesh for both x and y-axis. -*/ - void ShaderEffectItem::setMeshResolution(const QSize &size) { if (size == m_meshResolution) diff --git a/src/imports/shaders/shadereffectsource.cpp b/src/imports/shaders/shadereffectsource.cpp index 21d814a..f7a8a93 100644 --- a/src/imports/shaders/shadereffectsource.cpp +++ b/src/imports/shaders/shadereffectsource.cpp @@ -105,11 +105,6 @@ ShaderEffectSource::~ShaderEffectSource() sourceItem regardless of its clipping property. */ -/*! - \property ShaderEffectSource::sourceItem - \brief the Item which is the source for the effect. -*/ - void ShaderEffectSource::setSourceItem(QDeclarativeItem *item) { if (item == m_sourceItem) @@ -159,11 +154,6 @@ void ShaderEffectSource::setSourceItem(QDeclarativeItem *item) The default value is Qt.rect(0,0,0,0). */ -/*! - \property ShaderEffectSource::sourceRect - \brief the relative sourceRect for the source. -*/ - void ShaderEffectSource::setSourceRect(const QRectF &rect) { if (rect == m_sourceRect) @@ -188,11 +178,6 @@ void ShaderEffectSource::setSourceRect(const QRectF &rect) The default value is QSize(0,0). */ -/*! - \property ShaderEffectSource::textureSize - \brief the texture size for the source. -*/ - void ShaderEffectSource::setTextureSize(const QSize &size) { if (size == m_textureSize) @@ -220,11 +205,6 @@ void ShaderEffectSource::setTextureSize(const QSize &size) The default value is true. */ -/*! - \property ShaderEffectSource::live - \brief the flag tells whether source item content is changing between frames. -*/ - void ShaderEffectSource::setLive(bool s) { if (s == m_live) @@ -244,11 +224,6 @@ void ShaderEffectSource::setLive(bool s) The default value is false. */ -/*! - \property ShaderEffectSource::hideSource - \brief the flag tells whether original source item content should be hidden. -*/ - void ShaderEffectSource::setHideSource(bool hide) { if (hide == m_hideSource) @@ -276,11 +251,6 @@ void ShaderEffectSource::setHideSource(bool hide) */ -/*! - \property ShaderEffectSource::wrapMode - \brief the wrap parameter for the source after it has been mapped as a texture. -*/ - void ShaderEffectSource::setWrapMode(WrapMode mode) { if (mode == m_wrapMode) diff --git a/src/network/kernel/qnetworkproxy.cpp b/src/network/kernel/qnetworkproxy.cpp index 6d4df44..71d61a4 100644 --- a/src/network/kernel/qnetworkproxy.cpp +++ b/src/network/kernel/qnetworkproxy.cpp @@ -1197,6 +1197,11 @@ void QNetworkProxyQuery::setUrl(const QUrl &url) } #ifndef QT_NO_BEARERMANAGEMENT +/*! + Returns the network configuration of the proxy query. + + \sa setNetworkConfiguration() +*/ QNetworkConfiguration QNetworkProxyQuery::networkConfiguration() const { return d ? d->config : QNetworkConfiguration(); @@ -1214,7 +1219,7 @@ QNetworkConfiguration QNetworkProxyQuery::networkConfiguration() const you should first start the QNetworkSession and obtain the active configuration from its properties. - \sa networkConfiguration + \sa networkConfiguration() */ void QNetworkProxyQuery::setNetworkConfiguration(const QNetworkConfiguration &networkConfiguration) { diff --git a/src/opengl/qpaintengine_opengl.cpp b/src/opengl/qpaintengine_opengl.cpp index 71ed690..0f33cab 100644 --- a/src/opengl/qpaintengine_opengl.cpp +++ b/src/opengl/qpaintengine_opengl.cpp @@ -4536,11 +4536,14 @@ struct QGLGlyphCoord { }; struct QGLFontTexture { + QGLFontTexture() : data(0) { } + ~QGLFontTexture() { free(data); } int x_offset; // glyph offset within the int y_offset; GLuint texture; int width; int height; + uchar *data; }; typedef QHash<glyph_t, QGLGlyphCoord*> QGLGlyphHash; @@ -4563,7 +4566,7 @@ public: QGLGlyphCoord *lookup(QFontEngine *, glyph_t); void cacheGlyphs(QGLContext *, QFontEngine *, glyph_t *glyphs, int numGlyphs); void cleanCache(); - void allocTexture(int width, int height, GLuint texture); + void allocTexture(QGLFontTexture *); public slots: void cleanupContext(const QGLContext *); @@ -4681,19 +4684,18 @@ void QGLGlyphCache::cleanCache() qt_context_cache.clear(); } -void QGLGlyphCache::allocTexture(int width, int height, GLuint texture) +void QGLGlyphCache::allocTexture(QGLFontTexture *font_tex) { - uchar *tex_data = (uchar *) malloc(width*height*2); - memset(tex_data, 0, width*height*2); - glBindTexture(GL_TEXTURE_2D, texture); + font_tex->data = (uchar *) malloc(font_tex->width*font_tex->height*2); + memset(font_tex->data, 0, font_tex->width*font_tex->height*2); + glBindTexture(GL_TEXTURE_2D, font_tex->texture); #ifndef QT_OPENGL_ES glTexImage2D(GL_TEXTURE_2D, 0, GL_LUMINANCE8_ALPHA8, - width, height, 0, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, tex_data); + font_tex->width, font_tex->height, 0, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, font_tex->data); #else glTexImage2D(GL_TEXTURE_2D, 0, GL_LUMINANCE_ALPHA, - width, height, 0, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, tex_data); + font_tex->width, font_tex->height, 0, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, font_tex->data); #endif - free(tex_data); } #if 0 @@ -4777,13 +4779,13 @@ void QGLGlyphCache::cacheGlyphs(QGLContext *context, QFontEngine *fontEngine, Q_ASSERT(max_tex_size > 0); if (tex_width > max_tex_size) tex_width = max_tex_size; - allocTexture(tex_width, tex_height, font_texture); font_tex = new QGLFontTexture; font_tex->texture = font_texture; font_tex->x_offset = x_margin; font_tex->y_offset = y_margin; font_tex->width = tex_width; font_tex->height = tex_height; + allocTexture(font_tex); // qDebug() << "new font tex - width:" << tex_width << "height:"<< tex_height // << hex << "tex id:" << font_tex->texture << "key:" << font_key << "num cached:" << qt_font_textures.size(); qt_font_textures.insert(font_key, font_tex); @@ -4806,21 +4808,19 @@ void QGLGlyphCache::cacheGlyphs(QGLContext *context, QFontEngine *fontEngine, font_tex->y_offset += strip_height; if (font_tex->y_offset >= font_tex->height) { // get hold of the old font texture - uchar *old_tex_data = (uchar *) malloc(font_tex->width*font_tex->height*2); + uchar *old_tex_data = font_tex->data; int old_tex_height = font_tex->height; -#ifndef QT_OPENGL_ES - glGetTexImage(GL_TEXTURE_2D, 0, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, old_tex_data); -#endif // realloc a larger texture glDeleteTextures(1, &font_tex->texture); glGenTextures(1, &font_tex->texture); font_tex->height = qt_next_power_of_two(font_tex->height + strip_height); - allocTexture(font_tex->width, font_tex->height, font_tex->texture); + allocTexture(font_tex); // write back the old texture data glTexSubImage2D(GL_TEXTURE_2D, 0, 0, 0, font_tex->width, old_tex_height, GL_LUMINANCE_ALPHA, GL_UNSIGNED_BYTE, old_tex_data); + memcpy(font_tex->data, old_tex_data, font_tex->width*old_tex_height*2); free(old_tex_data); // update the texture coords and the y offset for the existing glyphs in @@ -4868,8 +4868,10 @@ void QGLGlyphCache::cacheGlyphs(QGLContext *context, QFontEngine *fontEngine, } #endif glyph_im = glyph_im.convertToFormat(QImage::Format_Indexed8); + int cacheLineStart = (font_tex->x_offset + font_tex->y_offset*font_tex->width)*2; for (int y=0; y<glyph_im.height(); ++y) { uchar *s = (uchar *) glyph_im.scanLine(y); + int lineStart = idx; for (int x=0; x<glyph_im.width(); ++x) { uchar alpha = is8BitGray ? *s : qAlpha(glyph_im.color(*s)); tex_data[idx] = alpha; @@ -4879,6 +4881,9 @@ void QGLGlyphCache::cacheGlyphs(QGLContext *context, QFontEngine *fontEngine, } if (glyph_im.width()%2 != 0) idx += 2; + // update cache + memcpy(font_tex->data+cacheLineStart, tex_data+lineStart, glyph_width*2); + cacheLineStart += font_tex->width*2; } glTexSubImage2D(GL_TEXTURE_2D, 0, font_tex->x_offset, font_tex->y_offset, glyph_width, glyph_im.height(), @@ -4950,7 +4955,7 @@ void QOpenGLPaintEngine::drawStaticTextItem(QStaticTextItem *textItem) glEnableClientState(GL_VERTEX_ARRAY); glEnableClientState(GL_TEXTURE_COORD_ARRAY); bool antialias = !(textItem->fontEngine()->fontDef.styleStrategy & QFont::NoAntialias) - && (d->matrix.type() > QTransform::TxTranslate); + && (d->matrix.type() > QTransform::TxTranslate); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MIN_FILTER, antialias ? GL_LINEAR : GL_NEAREST); glTexParameterf(GL_TEXTURE_2D, GL_TEXTURE_MAG_FILTER, antialias ? GL_LINEAR : GL_NEAREST); diff --git a/src/plugins/platforms/uikit/README b/src/plugins/platforms/uikit/README index 81ef0bd..a8031e6 100644 --- a/src/plugins/platforms/uikit/README +++ b/src/plugins/platforms/uikit/README @@ -7,8 +7,8 @@ There have no tests been run whatsoever. * Open GL ES 1/2 based backend * Single touch -* Text/font drawing using font shipped with application -* Text input (Opening/closing software input panel. +* Text/font drawing using system fonts (CoreText) +* Text input (Opening/closing software input panel Application has to perform necessary layout changes itself.) * Initial showing/hiding of status bar (as defined in the Info.plist) * Interface orientations as defined in the Info.plist of the application @@ -21,7 +21,16 @@ Building/Deploying the application has to be done in Xcode. You need to generate necessary moc_ files in advance and add these to the Xcode project. More details on the Xcode setup see below. -1) Build Qt +1) Known Issues + +* Console message + "QEventDispatcherUNIX: internal error, wakeUps.testAndSetRelease(1, 0) failed!" + seems to appear sometimes for some people for unknown reasons and + unknown effect +* JavaScript XmlHttpRequest doesn't work reliably even though networking + in general seems to + +2) Build Qt The example Xcode project in the examples subdirectory requires that you do shadow builds of Qt in qt-lighthouse-ios-simulator and qt-lighthouse-ios-device directories @@ -37,13 +46,13 @@ After configuring and building Qt you need to also build src/plugins/platforms/u Simulator: ---------- -configure -qpa -xplatform qpa/macx-iphonesimulator-g++ -arch i386 -developer-build -release -opengl es2 -no-accessibility -no-qt3support -no-multimedia -no-phonon-backend -no-svg -no-webkit -no-scripttools -no-openssl -no-sql-mysql -no-sql-odbc -no-cups -no-iconv -no-dbus -static -nomake tools -nomake demos -nomake docs -nomake examples -nomake translations +configure -qpa -xplatform qpa/macx-iphonesimulator-g++ -arch i386 -developer-build -release -opengl es2 -no-accessibility -no-qt3support -no-multimedia -no-phonon-backend -no-webkit -no-scripttools -no-openssl -no-sql-mysql -no-sql-odbc -no-cups -no-iconv -no-dbus -static -nomake tools -nomake demos -nomake docs -nomake examples -nomake translations Device: ------- -configure -qpa -xplatform qpa/macx-iphonedevice-g++ -arch armv7 -no-neon -developer-build -release -opengl es2 -no-accessibility -no-qt3support -no-multimedia -no-phonon-backend -no-svg -no-webkit -no-scripttools -no-openssl -no-sql-mysql -no-sql-odbc -no-cups -no-iconv -no-dbus -static -nomake tools -nomake demos -nomake docs -nomake examples -nomake translations +configure -qpa -xplatform qpa/macx-iphonedevice-g++ -arch armv7 -no-neon -developer-build -release -opengl es2 -no-accessibility -no-qt3support -no-multimedia -no-phonon-backend -no-webkit -no-scripttools -no-openssl -no-sql-mysql -no-sql-odbc -no-cups -no-iconv -no-dbus -static -nomake tools -nomake demos -nomake docs -nomake examples -nomake translations -2) XCode setup: +3) XCode setup: - there are examples in the examples subdirectory of the platform plugin - to create something fresh do something like: - Xcode: Create a "View-based Appplication" @@ -64,5 +73,5 @@ configure -qpa -xplatform qpa/macx-iphonedevice-g++ -arch armv7 -no-neon -develo and call Phonon::Factory::setBackend(qt_plugin_instance_phonon_av()); Link to libphonon and to plugins/phonon/phonon_av -3) Done: Build and Run. +4) Done: Build and Run. diff --git a/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo-Info.plist b/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo-Info.plist index 5bc1ac9..3c45823 100644 --- a/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo-Info.plist +++ b/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo-Info.plist @@ -6,6 +6,8 @@ <string>English</string> <key>CFBundleDisplayName</key> <string>${PRODUCT_NAME}</string> + <key>CFBundleDocumentTypes</key> + <array/> <key>CFBundleExecutable</key> <string>${EXECUTABLE_NAME}</string> <key>CFBundleIconFile</key> @@ -20,6 +22,8 @@ <string>APPL</string> <key>CFBundleSignature</key> <string>????</string> + <key>CFBundleURLTypes</key> + <array/> <key>CFBundleVersion</key> <string>1.0</string> <key>LSRequiresIPhoneOS</key> @@ -37,5 +41,9 @@ <string>UIInterfaceOrientationPortrait</string> <string>UIInterfaceOrientationPortraitUpsideDown</string> </array> + <key>UTExportedTypeDeclarations</key> + <array/> + <key>UTImportedTypeDeclarations</key> + <array/> </dict> </plist> diff --git a/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo.xcodeproj/project.pbxproj b/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo.xcodeproj/project.pbxproj index b564ef9..dedc462 100755 --- a/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo.xcodeproj/project.pbxproj +++ b/src/plugins/platforms/uikit/examples/flickrdemo/flickrdemo.xcodeproj/project.pbxproj @@ -17,13 +17,14 @@ D307DEB213EBCF5500399BD4 /* libQtOpenGL.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DEA913EBCF5500399BD4 /* libQtOpenGL.a */; }; D307DEB313EBCF5500399BD4 /* libQtScript.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DEAA13EBCF5500399BD4 /* libQtScript.a */; }; D307DEB413EBCF5500399BD4 /* libQtSql.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DEAB13EBCF5500399BD4 /* libQtSql.a */; }; - D307DEB513EBCF5500399BD4 /* libQtXml.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DEAC13EBCF5500399BD4 /* libQtXml.a */; }; D307DEB613EBCF5500399BD4 /* libQtXmlPatterns.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DEAD13EBCF5500399BD4 /* libQtXmlPatterns.a */; }; D307DEB813EBCF6400399BD4 /* libquikit.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DEB713EBCF6400399BD4 /* libquikit.a */; }; D333CCF213B88A4D0070E08E /* moc_qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCEF13B88A4D0070E08E /* moc_qmlapplicationviewer.cpp */; }; D333CCF313B88A4D0070E08E /* moc_qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCEF13B88A4D0070E08E /* moc_qmlapplicationviewer.cpp */; }; D333CCF413B88A4D0070E08E /* qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCF013B88A4D0070E08E /* qmlapplicationviewer.cpp */; }; D333CCF513B88A4D0070E08E /* qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCF013B88A4D0070E08E /* qmlapplicationviewer.cpp */; }; + D36D346513F3CD7E00EC5A41 /* CoreText.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D36D346413F3CD7E00EC5A41 /* CoreText.framework */; }; + D36D346613F3CD8800EC5A41 /* CoreText.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D36D346413F3CD7E00EC5A41 /* CoreText.framework */; }; D3A51610134B03DE00E30E2F /* OpenGLES.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D3A5160F134B03DE00E30E2F /* OpenGLES.framework */; }; D3A51612134B03E900E30E2F /* QuartzCore.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D3A51611134B03E900E30E2F /* QuartzCore.framework */; }; D3A51615134B041500E30E2F /* QuartzCore.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D3A51611134B03E900E30E2F /* QuartzCore.framework */; }; @@ -36,8 +37,6 @@ D3CAA7F213264F52008BB877 /* CoreGraphics.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 288765A40DF7441C002DB57D /* CoreGraphics.framework */; }; D3CAA7FA13264F8A008BB877 /* libz.1.2.3.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */; }; D3CAA81113264FF0008BB877 /* libz.1.2.3.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */; }; - D3CAA88A132652E5008BB877 /* fonts in Resources */ = {isa = PBXBuildFile; fileRef = D3CAA836132652E5008BB877 /* fonts */; }; - D3CAA88B132652E5008BB877 /* fonts in Resources */ = {isa = PBXBuildFile; fileRef = D3CAA836132652E5008BB877 /* fonts */; }; D3D815F31329339300CDE422 /* flickr in Resources */ = {isa = PBXBuildFile; fileRef = D3D815D31329339300CDE422 /* flickr */; }; D3D815F4132933AB00CDE422 /* flickr in Resources */ = {isa = PBXBuildFile; fileRef = D3D815D31329339300CDE422 /* flickr */; }; D3D81758132A184300CDE422 /* libQtCore.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D81752132A184300CDE422 /* libQtCore.a */; }; @@ -46,7 +45,6 @@ D3D8175B132A184300CDE422 /* libQtNetwork.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D81755132A184300CDE422 /* libQtNetwork.a */; }; D3D8175C132A184300CDE422 /* libQtScript.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D81756132A184300CDE422 /* libQtScript.a */; }; D3D8175D132A184300CDE422 /* libQtSql.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D81757132A184300CDE422 /* libQtSql.a */; }; - D3D81760132A185A00CDE422 /* libQtXml.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D8175E132A185A00CDE422 /* libQtXml.a */; }; D3D81761132A185A00CDE422 /* libQtXmlPatterns.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D8175F132A185A00CDE422 /* libQtXmlPatterns.a */; }; D3D81763132A186B00CDE422 /* libquikit.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D81762132A186B00CDE422 /* libquikit.a */; }; /* End PBXBuildFile section */ @@ -65,19 +63,18 @@ D307DEA913EBCF5500399BD4 /* libQtOpenGL.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtOpenGL.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtOpenGL.a"; sourceTree = "<group>"; }; D307DEAA13EBCF5500399BD4 /* libQtScript.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtScript.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtScript.a"; sourceTree = "<group>"; }; D307DEAB13EBCF5500399BD4 /* libQtSql.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtSql.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtSql.a"; sourceTree = "<group>"; }; - D307DEAC13EBCF5500399BD4 /* libQtXml.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXml.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtXml.a"; sourceTree = "<group>"; }; D307DEAD13EBCF5500399BD4 /* libQtXmlPatterns.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXmlPatterns.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtXmlPatterns.a"; sourceTree = "<group>"; }; D307DEB713EBCF6400399BD4 /* libquikit.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libquikit.a; path = "../../../../../../../qt-lighthouse-ios-simulator/plugins/platforms/libquikit.a"; sourceTree = "<group>"; }; D333CCEF13B88A4D0070E08E /* moc_qmlapplicationviewer.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = moc_qmlapplicationviewer.cpp; path = ../share/qmlapplicationviewer/moc_qmlapplicationviewer.cpp; sourceTree = "<group>"; }; D333CCF013B88A4D0070E08E /* qmlapplicationviewer.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = qmlapplicationviewer.cpp; path = ../share/qmlapplicationviewer/qmlapplicationviewer.cpp; sourceTree = "<group>"; }; D333CCF113B88A4D0070E08E /* qmlapplicationviewer.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; name = qmlapplicationviewer.h; path = ../share/qmlapplicationviewer/qmlapplicationviewer.h; sourceTree = "<group>"; }; + D36D346413F3CD7E00EC5A41 /* CoreText.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = CoreText.framework; path = System/Library/Frameworks/CoreText.framework; sourceTree = SDKROOT; }; D3A5160F134B03DE00E30E2F /* OpenGLES.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = OpenGLES.framework; path = System/Library/Frameworks/OpenGLES.framework; sourceTree = SDKROOT; }; D3A51611134B03E900E30E2F /* QuartzCore.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = QuartzCore.framework; path = System/Library/Frameworks/QuartzCore.framework; sourceTree = SDKROOT; }; D3A51617134B042A00E30E2F /* libQtOpenGL.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtOpenGL.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtOpenGL.a"; sourceTree = "<group>"; }; D3CAA7C713264AAD008BB877 /* main.mm */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.objcpp; path = main.mm; sourceTree = "<group>"; }; D3CAA7F613264F52008BB877 /* flickrdemo.app */ = {isa = PBXFileReference; explicitFileType = wrapper.application; includeInIndex = 0; path = flickrdemo.app; sourceTree = BUILT_PRODUCTS_DIR; }; D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */ = {isa = PBXFileReference; lastKnownFileType = "compiled.mach-o.dylib"; name = libz.1.2.3.dylib; path = usr/lib/libz.1.2.3.dylib; sourceTree = SDKROOT; }; - D3CAA836132652E5008BB877 /* fonts */ = {isa = PBXFileReference; lastKnownFileType = folder; name = fonts; path = ../../../../../../lib/fonts; sourceTree = SOURCE_ROOT; }; D3D815D31329339300CDE422 /* flickr */ = {isa = PBXFileReference; lastKnownFileType = folder; name = flickr; path = ../../../../../../demos/declarative/flickr; sourceTree = SOURCE_ROOT; }; D3D81752132A184300CDE422 /* libQtCore.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtCore.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtCore.a"; sourceTree = SOURCE_ROOT; }; D3D81753132A184300CDE422 /* libQtDeclarative.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtDeclarative.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtDeclarative.a"; sourceTree = SOURCE_ROOT; }; @@ -85,7 +82,6 @@ D3D81755132A184300CDE422 /* libQtNetwork.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtNetwork.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtNetwork.a"; sourceTree = SOURCE_ROOT; }; D3D81756132A184300CDE422 /* libQtScript.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtScript.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtScript.a"; sourceTree = SOURCE_ROOT; }; D3D81757132A184300CDE422 /* libQtSql.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtSql.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtSql.a"; sourceTree = SOURCE_ROOT; }; - D3D8175E132A185A00CDE422 /* libQtXml.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXml.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtXml.a"; sourceTree = SOURCE_ROOT; }; D3D8175F132A185A00CDE422 /* libQtXmlPatterns.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXmlPatterns.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtXmlPatterns.a"; sourceTree = SOURCE_ROOT; }; D3D81762132A186B00CDE422 /* libquikit.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libquikit.a; path = "../../../../../../../qt-lighthouse-ios-device/plugins/platforms/libquikit.a"; sourceTree = SOURCE_ROOT; }; /* End PBXFileReference section */ @@ -95,6 +91,7 @@ isa = PBXFrameworksBuildPhase; buildActionMask = 2147483647; files = ( + D36D346613F3CD8800EC5A41 /* CoreText.framework in Frameworks */, D3A51612134B03E900E30E2F /* QuartzCore.framework in Frameworks */, D3A51610134B03DE00E30E2F /* OpenGLES.framework in Frameworks */, 1D60589F0D05DD5A006BFB54 /* Foundation.framework in Frameworks */, @@ -108,7 +105,6 @@ D307DEB213EBCF5500399BD4 /* libQtOpenGL.a in Frameworks */, D307DEB313EBCF5500399BD4 /* libQtScript.a in Frameworks */, D307DEB413EBCF5500399BD4 /* libQtSql.a in Frameworks */, - D307DEB513EBCF5500399BD4 /* libQtXml.a in Frameworks */, D307DEB613EBCF5500399BD4 /* libQtXmlPatterns.a in Frameworks */, D307DEB813EBCF6400399BD4 /* libquikit.a in Frameworks */, ); @@ -118,6 +114,7 @@ isa = PBXFrameworksBuildPhase; buildActionMask = 2147483647; files = ( + D36D346513F3CD7E00EC5A41 /* CoreText.framework in Frameworks */, D3A51618134B042A00E30E2F /* libQtOpenGL.a in Frameworks */, D3CAA7F013264F52008BB877 /* Foundation.framework in Frameworks */, D3CAA7F113264F52008BB877 /* UIKit.framework in Frameworks */, @@ -131,7 +128,6 @@ D3D8175B132A184300CDE422 /* libQtNetwork.a in Frameworks */, D3D8175C132A184300CDE422 /* libQtScript.a in Frameworks */, D3D8175D132A184300CDE422 /* libQtSql.a in Frameworks */, - D3D81760132A185A00CDE422 /* libQtXml.a in Frameworks */, D3D81761132A185A00CDE422 /* libQtXmlPatterns.a in Frameworks */, D3D81763132A186B00CDE422 /* libquikit.a in Frameworks */, ); @@ -174,7 +170,6 @@ isa = PBXGroup; children = ( D3D815D31329339300CDE422 /* flickr */, - D3CAA836132652E5008BB877 /* fonts */, 8D1107310486CEB800E47090 /* flickrdemo-Info.plist */, ); name = Resources; @@ -190,6 +185,7 @@ 288765A40DF7441C002DB57D /* CoreGraphics.framework */, D3A51611134B03E900E30E2F /* QuartzCore.framework */, D3A5160F134B03DE00E30E2F /* OpenGLES.framework */, + D36D346413F3CD7E00EC5A41 /* CoreText.framework */, D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */, ); name = Frameworks; @@ -216,7 +212,6 @@ D3A51617134B042A00E30E2F /* libQtOpenGL.a */, D3D81756132A184300CDE422 /* libQtScript.a */, D3D81757132A184300CDE422 /* libQtSql.a */, - D3D8175E132A185A00CDE422 /* libQtXml.a */, D3D8175F132A185A00CDE422 /* libQtXmlPatterns.a */, ); name = Device; @@ -233,7 +228,6 @@ D307DEA913EBCF5500399BD4 /* libQtOpenGL.a */, D307DEAA13EBCF5500399BD4 /* libQtScript.a */, D307DEAB13EBCF5500399BD4 /* libQtSql.a */, - D307DEAC13EBCF5500399BD4 /* libQtXml.a */, D307DEAD13EBCF5500399BD4 /* libQtXmlPatterns.a */, ); name = Simulator; @@ -306,7 +300,6 @@ isa = PBXResourcesBuildPhase; buildActionMask = 2147483647; files = ( - D3CAA88A132652E5008BB877 /* fonts in Resources */, D3D815F31329339300CDE422 /* flickr in Resources */, ); runOnlyForDeploymentPostprocessing = 0; @@ -315,7 +308,6 @@ isa = PBXResourcesBuildPhase; buildActionMask = 2147483647; files = ( - D3CAA88B132652E5008BB877 /* fonts in Resources */, D3D815F4132933AB00CDE422 /* flickr in Resources */, ); runOnlyForDeploymentPostprocessing = 0; diff --git a/src/plugins/platforms/uikit/examples/qmltest/qmltest-Info.plist b/src/plugins/platforms/uikit/examples/qmltest/qmltest-Info.plist index 1566585..531d93d 100644 --- a/src/plugins/platforms/uikit/examples/qmltest/qmltest-Info.plist +++ b/src/plugins/platforms/uikit/examples/qmltest/qmltest-Info.plist @@ -6,6 +6,8 @@ <string>English</string> <key>CFBundleDisplayName</key> <string>${PRODUCT_NAME}</string> + <key>CFBundleDocumentTypes</key> + <array/> <key>CFBundleExecutable</key> <string>${EXECUTABLE_NAME}</string> <key>CFBundleIconFile</key> @@ -20,9 +22,15 @@ <string>APPL</string> <key>CFBundleSignature</key> <string>????</string> + <key>CFBundleURLTypes</key> + <array/> <key>CFBundleVersion</key> <string>1.0</string> <key>LSRequiresIPhoneOS</key> <true/> + <key>UTExportedTypeDeclarations</key> + <array/> + <key>UTImportedTypeDeclarations</key> + <array/> </dict> </plist> diff --git a/src/plugins/platforms/uikit/examples/qmltest/qmltest.xcodeproj/project.pbxproj b/src/plugins/platforms/uikit/examples/qmltest/qmltest.xcodeproj/project.pbxproj index afebcba..021eed2 100755 --- a/src/plugins/platforms/uikit/examples/qmltest/qmltest.xcodeproj/project.pbxproj +++ b/src/plugins/platforms/uikit/examples/qmltest/qmltest.xcodeproj/project.pbxproj @@ -18,12 +18,13 @@ D307DED313EBD05900399BD4 /* libQtOpenGL.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DECA13EBD05900399BD4 /* libQtOpenGL.a */; }; D307DED413EBD05900399BD4 /* libQtScript.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DECB13EBD05900399BD4 /* libQtScript.a */; }; D307DED513EBD05900399BD4 /* libQtSql.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DECC13EBD05900399BD4 /* libQtSql.a */; }; - D307DED613EBD05900399BD4 /* libQtXml.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DECD13EBD05900399BD4 /* libQtXml.a */; }; D307DED713EBD05900399BD4 /* libQtXmlPatterns.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D307DECE13EBD05900399BD4 /* libQtXmlPatterns.a */; }; D333CCF913B88A690070E08E /* moc_qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCF613B88A690070E08E /* moc_qmlapplicationviewer.cpp */; }; D333CCFA13B88A690070E08E /* moc_qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCF613B88A690070E08E /* moc_qmlapplicationviewer.cpp */; }; D333CCFB13B88A690070E08E /* qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCF713B88A690070E08E /* qmlapplicationviewer.cpp */; }; D333CCFC13B88A690070E08E /* qmlapplicationviewer.cpp in Sources */ = {isa = PBXBuildFile; fileRef = D333CCF713B88A690070E08E /* qmlapplicationviewer.cpp */; }; + D34F290413F29AF400E4F9AC /* CoreText.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D34F290313F29AF400E4F9AC /* CoreText.framework */; }; + D34F290713F29B0A00E4F9AC /* CoreText.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D34F290613F29B0300E4F9AC /* CoreText.framework */; }; D35784261345D9940046D202 /* OpenGLES.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D35784251345D9940046D202 /* OpenGLES.framework */; }; D35784281345D9E00046D202 /* QuartzCore.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = D35784271345D9E00046D202 /* QuartzCore.framework */; }; D3578436134A09990046D202 /* libQtOpenGL.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3578435134A09990046D202 /* libQtOpenGL.a */; }; @@ -36,8 +37,6 @@ D3CAA7F213264F52008BB877 /* CoreGraphics.framework in Frameworks */ = {isa = PBXBuildFile; fileRef = 288765A40DF7441C002DB57D /* CoreGraphics.framework */; }; D3CAA7FA13264F8A008BB877 /* libz.1.2.3.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */; }; D3CAA81113264FF0008BB877 /* libz.1.2.3.dylib in Frameworks */ = {isa = PBXBuildFile; fileRef = D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */; }; - D3CAA88A132652E5008BB877 /* fonts in Resources */ = {isa = PBXBuildFile; fileRef = D3CAA836132652E5008BB877 /* fonts */; }; - D3CAA88B132652E5008BB877 /* fonts in Resources */ = {isa = PBXBuildFile; fileRef = D3CAA836132652E5008BB877 /* fonts */; }; D3CAA89113265310008BB877 /* qml in Resources */ = {isa = PBXBuildFile; fileRef = D3CAA88E13265310008BB877 /* qml */; }; D3CAA89213265310008BB877 /* qml in Resources */ = {isa = PBXBuildFile; fileRef = D3CAA88E13265310008BB877 /* qml */; }; D3D817B2132A2CFD00CDE422 /* libQtCore.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817AA132A2CFD00CDE422 /* libQtCore.a */; }; @@ -46,7 +45,6 @@ D3D817B5132A2CFD00CDE422 /* libQtNetwork.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817AD132A2CFD00CDE422 /* libQtNetwork.a */; }; D3D817B6132A2CFD00CDE422 /* libQtScript.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817AE132A2CFD00CDE422 /* libQtScript.a */; }; D3D817B7132A2CFD00CDE422 /* libQtSql.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817AF132A2CFD00CDE422 /* libQtSql.a */; }; - D3D817B8132A2CFD00CDE422 /* libQtXml.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817B0132A2CFD00CDE422 /* libQtXml.a */; }; D3D817B9132A2CFD00CDE422 /* libQtXmlPatterns.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817B1132A2CFD00CDE422 /* libQtXmlPatterns.a */; }; D3D817BB132A2D0E00CDE422 /* libquikit.a in Frameworks */ = {isa = PBXBuildFile; fileRef = D3D817BA132A2D0E00CDE422 /* libquikit.a */; }; /* End PBXBuildFile section */ @@ -66,18 +64,18 @@ D307DECA13EBD05900399BD4 /* libQtOpenGL.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtOpenGL.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtOpenGL.a"; sourceTree = "<group>"; }; D307DECB13EBD05900399BD4 /* libQtScript.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtScript.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtScript.a"; sourceTree = "<group>"; }; D307DECC13EBD05900399BD4 /* libQtSql.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtSql.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtSql.a"; sourceTree = "<group>"; }; - D307DECD13EBD05900399BD4 /* libQtXml.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXml.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtXml.a"; sourceTree = "<group>"; }; D307DECE13EBD05900399BD4 /* libQtXmlPatterns.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXmlPatterns.a; path = "../../../../../../../qt-lighthouse-ios-simulator/lib/libQtXmlPatterns.a"; sourceTree = "<group>"; }; D333CCF613B88A690070E08E /* moc_qmlapplicationviewer.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = moc_qmlapplicationviewer.cpp; path = ../share/qmlapplicationviewer/moc_qmlapplicationviewer.cpp; sourceTree = "<group>"; }; D333CCF713B88A690070E08E /* qmlapplicationviewer.cpp */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.cpp; name = qmlapplicationviewer.cpp; path = ../share/qmlapplicationviewer/qmlapplicationviewer.cpp; sourceTree = "<group>"; }; D333CCF813B88A690070E08E /* qmlapplicationviewer.h */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.c.h; name = qmlapplicationviewer.h; path = ../share/qmlapplicationviewer/qmlapplicationviewer.h; sourceTree = "<group>"; }; + D34F290313F29AF400E4F9AC /* CoreText.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = CoreText.framework; path = System/Library/Frameworks/CoreText.framework; sourceTree = SDKROOT; }; + D34F290613F29B0300E4F9AC /* CoreText.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = CoreText.framework; path = System/Library/Frameworks/CoreText.framework; sourceTree = SDKROOT; }; D35784251345D9940046D202 /* OpenGLES.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = OpenGLES.framework; path = System/Library/Frameworks/OpenGLES.framework; sourceTree = SDKROOT; }; D35784271345D9E00046D202 /* QuartzCore.framework */ = {isa = PBXFileReference; lastKnownFileType = wrapper.framework; name = QuartzCore.framework; path = System/Library/Frameworks/QuartzCore.framework; sourceTree = SDKROOT; }; D3578435134A09990046D202 /* libQtOpenGL.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtOpenGL.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtOpenGL.a"; sourceTree = "<group>"; }; D3CAA7C713264AAD008BB877 /* main.mm */ = {isa = PBXFileReference; fileEncoding = 4; lastKnownFileType = sourcecode.cpp.objcpp; path = main.mm; sourceTree = "<group>"; }; D3CAA7F613264F52008BB877 /* qmltest.app */ = {isa = PBXFileReference; explicitFileType = wrapper.application; includeInIndex = 0; path = qmltest.app; sourceTree = BUILT_PRODUCTS_DIR; }; D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */ = {isa = PBXFileReference; lastKnownFileType = "compiled.mach-o.dylib"; name = libz.1.2.3.dylib; path = usr/lib/libz.1.2.3.dylib; sourceTree = SDKROOT; }; - D3CAA836132652E5008BB877 /* fonts */ = {isa = PBXFileReference; lastKnownFileType = folder; name = fonts; path = ../../../../../../lib/fonts; sourceTree = SOURCE_ROOT; }; D3CAA88E13265310008BB877 /* qml */ = {isa = PBXFileReference; lastKnownFileType = folder; path = qml; sourceTree = SOURCE_ROOT; }; D3D817AA132A2CFD00CDE422 /* libQtCore.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtCore.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtCore.a"; sourceTree = SOURCE_ROOT; }; D3D817AB132A2CFD00CDE422 /* libQtDeclarative.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtDeclarative.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtDeclarative.a"; sourceTree = SOURCE_ROOT; }; @@ -85,7 +83,6 @@ D3D817AD132A2CFD00CDE422 /* libQtNetwork.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtNetwork.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtNetwork.a"; sourceTree = SOURCE_ROOT; }; D3D817AE132A2CFD00CDE422 /* libQtScript.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtScript.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtScript.a"; sourceTree = SOURCE_ROOT; }; D3D817AF132A2CFD00CDE422 /* libQtSql.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtSql.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtSql.a"; sourceTree = SOURCE_ROOT; }; - D3D817B0132A2CFD00CDE422 /* libQtXml.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXml.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtXml.a"; sourceTree = SOURCE_ROOT; }; D3D817B1132A2CFD00CDE422 /* libQtXmlPatterns.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libQtXmlPatterns.a; path = "../../../../../../../qt-lighthouse-ios-device/lib/libQtXmlPatterns.a"; sourceTree = SOURCE_ROOT; }; D3D817BA132A2D0E00CDE422 /* libquikit.a */ = {isa = PBXFileReference; lastKnownFileType = archive.ar; name = libquikit.a; path = "../../../../../../../qt-lighthouse-ios-device/plugins/platforms/libquikit.a"; sourceTree = SOURCE_ROOT; }; /* End PBXFileReference section */ @@ -95,6 +92,7 @@ isa = PBXFrameworksBuildPhase; buildActionMask = 2147483647; files = ( + D34F290413F29AF400E4F9AC /* CoreText.framework in Frameworks */, D35784281345D9E00046D202 /* QuartzCore.framework in Frameworks */, 1D60589F0D05DD5A006BFB54 /* Foundation.framework in Frameworks */, 1DF5F4E00D08C38300B7A737 /* UIKit.framework in Frameworks */, @@ -108,7 +106,6 @@ D307DED313EBD05900399BD4 /* libQtOpenGL.a in Frameworks */, D307DED413EBD05900399BD4 /* libQtScript.a in Frameworks */, D307DED513EBD05900399BD4 /* libQtSql.a in Frameworks */, - D307DED613EBD05900399BD4 /* libQtXml.a in Frameworks */, D307DED713EBD05900399BD4 /* libQtXmlPatterns.a in Frameworks */, D307DEC513EBD04100399BD4 /* libquikit.a in Frameworks */, ); @@ -118,6 +115,7 @@ isa = PBXFrameworksBuildPhase; buildActionMask = 2147483647; files = ( + D34F290713F29B0A00E4F9AC /* CoreText.framework in Frameworks */, D357843A134A0AB10046D202 /* QuartzCore.framework in Frameworks */, D3578439134A0AAE0046D202 /* OpenGLES.framework in Frameworks */, D3CAA7F013264F52008BB877 /* Foundation.framework in Frameworks */, @@ -130,7 +128,6 @@ D3D817B5132A2CFD00CDE422 /* libQtNetwork.a in Frameworks */, D3D817B6132A2CFD00CDE422 /* libQtScript.a in Frameworks */, D3D817B7132A2CFD00CDE422 /* libQtSql.a in Frameworks */, - D3D817B8132A2CFD00CDE422 /* libQtXml.a in Frameworks */, D3D817B9132A2CFD00CDE422 /* libQtXmlPatterns.a in Frameworks */, D3D817BB132A2D0E00CDE422 /* libquikit.a in Frameworks */, D3578436134A09990046D202 /* libQtOpenGL.a in Frameworks */, @@ -152,6 +149,7 @@ 29B97314FDCFA39411CA2CEA /* CustomTemplate */ = { isa = PBXGroup; children = ( + D34F290313F29AF400E4F9AC /* CoreText.framework */, 29B97315FDCFA39411CA2CEA /* Other Sources */, 29B97317FDCFA39411CA2CEA /* Resources */, D3CAA7E213264E8C008BB877 /* QMLApplicationViewer */, @@ -174,7 +172,6 @@ isa = PBXGroup; children = ( D3CAA88E13265310008BB877 /* qml */, - D3CAA836132652E5008BB877 /* fonts */, 8D1107310486CEB800E47090 /* qmltest-Info.plist */, ); name = Resources; @@ -190,6 +187,7 @@ 288765A40DF7441C002DB57D /* CoreGraphics.framework */, D35784251345D9940046D202 /* OpenGLES.framework */, D35784271345D9E00046D202 /* QuartzCore.framework */, + D34F290613F29B0300E4F9AC /* CoreText.framework */, D3CAA7F913264F8A008BB877 /* libz.1.2.3.dylib */, ); name = Frameworks; @@ -216,7 +214,6 @@ D3578435134A09990046D202 /* libQtOpenGL.a */, D3D817AE132A2CFD00CDE422 /* libQtScript.a */, D3D817AF132A2CFD00CDE422 /* libQtSql.a */, - D3D817B0132A2CFD00CDE422 /* libQtXml.a */, D3D817B1132A2CFD00CDE422 /* libQtXmlPatterns.a */, ); name = Device; @@ -233,7 +230,6 @@ D307DECA13EBD05900399BD4 /* libQtOpenGL.a */, D307DECB13EBD05900399BD4 /* libQtScript.a */, D307DECC13EBD05900399BD4 /* libQtSql.a */, - D307DECD13EBD05900399BD4 /* libQtXml.a */, D307DECE13EBD05900399BD4 /* libQtXmlPatterns.a */, ); name = Simulator; @@ -306,7 +302,6 @@ isa = PBXResourcesBuildPhase; buildActionMask = 2147483647; files = ( - D3CAA88A132652E5008BB877 /* fonts in Resources */, D3CAA89113265310008BB877 /* qml in Resources */, ); runOnlyForDeploymentPostprocessing = 0; @@ -315,7 +310,6 @@ isa = PBXResourcesBuildPhase; buildActionMask = 2147483647; files = ( - D3CAA88B132652E5008BB877 /* fonts in Resources */, D3CAA89213265310008BB877 /* qml in Resources */, ); runOnlyForDeploymentPostprocessing = 0; diff --git a/src/plugins/platforms/uikit/phonon_av/avmediaobject.mm b/src/plugins/platforms/uikit/phonon_av/avmediaobject.mm index 388866f..9cbddc0 100644 --- a/src/plugins/platforms/uikit/phonon_av/avmediaobject.mm +++ b/src/plugins/platforms/uikit/phonon_av/avmediaobject.mm @@ -60,7 +60,7 @@ - (id)initWithMediaObject:(AVMediaObject *)obj { - if (self = [self init]) { + if ((self = [self init])) { mediaObject = obj; } return self; diff --git a/src/plugins/platforms/uikit/platform.pro b/src/plugins/platforms/uikit/platform.pro index 726da06..b5ff62f 100644 --- a/src/plugins/platforms/uikit/platform.pro +++ b/src/plugins/platforms/uikit/platform.pro @@ -17,11 +17,19 @@ OBJECTIVE_HEADERS = quikitintegration.h \ quikiteventloop.h \ quikitwindowsurface.h -HEADERS = quikitsoftwareinputhandler.h +HEADERS = quikitsoftwareinputhandler.h \ + qcoretextfontdatabase.h + +SOURCES += \ + qcoretextfontdatabase.cpp + +#needed for qcoretextfontengine even if it's not used +INCLUDEPATH += $$QT_SOURCE_TREE/src/3rdparty/harfbuzz/src #add libz for freetype. LIBS += -lz -include(../fontdatabases/genericunix/genericunix.pri) target.path += $$[QT_INSTALL_PLUGINS]/platforms INSTALLS += target + + diff --git a/src/plugins/platforms/uikit/qcoretextfontdatabase.cpp b/src/plugins/platforms/uikit/qcoretextfontdatabase.cpp new file mode 100644 index 0000000..76ad936 --- /dev/null +++ b/src/plugins/platforms/uikit/qcoretextfontdatabase.cpp @@ -0,0 +1,156 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the plugins of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** GNU Lesser General Public License Usage +** This file may be used under the terms of the GNU Lesser General Public +** License version 2.1 as published by the Free Software Foundation and +** appearing in the file LICENSE.LGPL included in the packaging of this +** file. Please review the following information to ensure the GNU Lesser +** General Public License version 2.1 requirements will be met: +** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU General +** Public License version 3.0 as published by the Free Software Foundation +** and appearing in the file LICENSE.GPL included in the packaging of this +** file. Please review the following information to ensure the GNU General +** Public License version 3.0 requirements will be met: +** http://www.gnu.org/copyleft/gpl.html. +** +** Other Usage +** Alternatively, this file may be used in accordance with the terms and +** conditions contained in a signed written agreement between you and Nokia. +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include "qcoretextfontdatabase.h" + +#include <CoreText/CoreText.h> + +#include <private/qcore_mac_p.h> +#include <private/qfontengine_coretext_p.h> + +#include <QtDebug> + +QT_BEGIN_NAMESPACE + +void QCoreTextFontDatabase::populateFontDatabase() +{ + QCFType<CTFontCollectionRef> collection = CTFontCollectionCreateFromAvailableFonts(0); + if(!collection) + return; + QCFType<CFArrayRef> fonts = CTFontCollectionCreateMatchingFontDescriptors(collection); + if(!fonts) + return; + QSupportedWritingSystems supportedWritingSystems; + for (int i = 0; i < QFontDatabase::WritingSystemsCount; ++i) + supportedWritingSystems.setSupported((QFontDatabase::WritingSystem)i, true); + QString foundry_name = "CoreText"; + const int numFonts = CFArrayGetCount(fonts); + for(int i = 0; i < numFonts; ++i) { + CTFontDescriptorRef font = (CTFontDescriptorRef)CFArrayGetValueAtIndex(fonts, i); + + QCFString family_name = (CFStringRef)CTFontDescriptorCopyAttribute(font, kCTFontFamilyNameAttribute); +// QCFString style_name = (CFStringRef)CTFontDescriptorCopyAttribute(font, kCTFontStyleNameAttribute); + + QFont::Weight fontWeight = QFont::Normal; + QFont::Style fontStyle = QFont::StyleNormal; + if(QCFType<CFDictionaryRef> styles = (CFDictionaryRef)CTFontDescriptorCopyAttribute(font, kCTFontTraitsAttribute)) { + if(CFNumberRef weight = (CFNumberRef)CFDictionaryGetValue(styles, kCTFontWeightTrait)) { + Q_ASSERT(CFNumberIsFloatType(weight)); + double d; + if(CFNumberGetValue(weight, kCFNumberDoubleType, &d)) { + if (d > 0.0) + fontWeight = QFont::Bold; + } + } + if(CFNumberRef italic = (CFNumberRef)CFDictionaryGetValue(styles, kCTFontSlantTrait)) { + Q_ASSERT(CFNumberIsFloatType(italic)); + double d; + if(CFNumberGetValue(italic, kCFNumberDoubleType, &d)) { + if (d > 0.0) + fontStyle = QFont::StyleItalic; + } + } + } + + int pixelSize = 0; + if(QCFType<CFNumberRef> size = (CFNumberRef)CTFontDescriptorCopyAttribute(font, kCTFontSizeAttribute)) { + if(CFNumberIsFloatType(size)) { + double d; + CFNumberGetValue(size, kCFNumberDoubleType, &d); + pixelSize = d; + } else { + CFNumberGetValue(size, kCFNumberIntType, &pixelSize); + } + } + registerFont(QString(family_name), + foundry_name, + fontWeight, + fontStyle, + QFont::Unstretched, + true, + true, + pixelSize, + supportedWritingSystems, + 0); + } +} + +QFontEngine *QCoreTextFontDatabase::fontEngine(const QFontDef &fontDef, QUnicodeTables::Script script, void *handle) +{ + Q_UNUSED(script) + Q_UNUSED(handle) + CTFontSymbolicTraits symbolicTraits = 0; + if (fontDef.weight >= QFont::Bold) + symbolicTraits |= kCTFontBoldTrait; + switch (fontDef.style) { + case QFont::StyleNormal: + break; + case QFont::StyleItalic: + case QFont::StyleOblique: + symbolicTraits |= kCTFontItalicTrait; + break; + } + + CGAffineTransform transform = CGAffineTransformIdentity; + if (fontDef.stretch != 100) { + transform = CGAffineTransformMakeScale(float(fontDef.stretch) / float(100), 1); + } + + QCFType<CTFontRef> baseFont = CTFontCreateWithName(QCFString(fontDef.family), fontDef.pixelSize, &transform); + QCFType<CTFontRef> ctFont = NULL; + // There is a side effect in Core Text: if we apply 0 as symbolic traits to a font in normal weight, + // we will get the light version of that font (while the way supposed to work doesn't: + // setting kCTFontWeightTrait to some value between -1.0 to 0.0 has no effect on font selection) + if (fontDef.weight != QFont::Normal || symbolicTraits) + ctFont = CTFontCreateCopyWithSymbolicTraits(baseFont, fontDef.pixelSize, &transform, symbolicTraits, symbolicTraits); + + // CTFontCreateCopyWithSymbolicTraits returns NULL if we ask for a trait that does + // not exist for the given font. (for example italic) + if (ctFont == 0) { + ctFont = baseFont; + } + + if (ctFont) + return new QCoreTextFontEngine(ctFont, fontDef); + return 0; +} + +QT_END_NAMESPACE diff --git a/src/plugins/platforms/uikit/qcoretextfontdatabase.h b/src/plugins/platforms/uikit/qcoretextfontdatabase.h new file mode 100644 index 0000000..f4fcb20 --- /dev/null +++ b/src/plugins/platforms/uikit/qcoretextfontdatabase.h @@ -0,0 +1,58 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the plugins of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** GNU Lesser General Public License Usage +** This file may be used under the terms of the GNU Lesser General Public +** License version 2.1 as published by the Free Software Foundation and +** appearing in the file LICENSE.LGPL included in the packaging of this +** file. Please review the following information to ensure the GNU Lesser +** General Public License version 2.1 requirements will be met: +** http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU General +** Public License version 3.0 as published by the Free Software Foundation +** and appearing in the file LICENSE.GPL included in the packaging of this +** file. Please review the following information to ensure the GNU General +** Public License version 3.0 requirements will be met: +** http://www.gnu.org/copyleft/gpl.html. +** +** Other Usage +** Alternatively, this file may be used in accordance with the terms and +** conditions contained in a signed written agreement between you and Nokia. +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#ifndef QCORETEXTFONTDATABASE_H +#define QCORETEXTFONTDATABASE_H + +#include <QtGui/QPlatformFontDatabase> + +QT_BEGIN_NAMESPACE + +class QCoreTextFontDatabase : public QPlatformFontDatabase +{ +public: + void populateFontDatabase(); + QFontEngine *fontEngine(const QFontDef &fontDef, QUnicodeTables::Script script, void *handle); +}; + +QT_END_NAMESPACE + +#endif // QCORETEXTFONTDATABASE_H diff --git a/src/plugins/platforms/uikit/quikiteventloop.mm b/src/plugins/platforms/uikit/quikiteventloop.mm index 7df7ec8..152a34a 100644 --- a/src/plugins/platforms/uikit/quikiteventloop.mm +++ b/src/plugins/platforms/uikit/quikiteventloop.mm @@ -67,7 +67,6 @@ - (id)initWithEventLoopIntegration:(QUIKitEventLoop *)integration; -- (void)processEvents; - (void)processEventsAndSchedule; @end @@ -160,17 +159,11 @@ return self; } -- (void)processEvents -{ - QPlatformEventLoopIntegration::processEvents(); -} - - (void)processEventsAndSchedule { QPlatformEventLoopIntegration::processEvents(); - qint64 nextTime = qMin((qint64)33, mIntegration->nextTimerEvent()); // at least 30fps NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init]; - NSDate *nextDate = [[NSDate date] dateByAddingTimeInterval:((double)nextTime/1000)]; + NSDate *nextDate = [[NSDate date] dateByAddingTimeInterval:((double)mIntegration->nextTimerEvent()/1000.)]; [mIntegration->mTimer setFireDate:nextDate]; [pool release]; } @@ -211,7 +204,7 @@ void QUIKitEventLoop::quitEventLoop() void QUIKitEventLoop::qtNeedsToProcessEvents() { - [mHelper performSelectorOnMainThread:@selector(processEvents) withObject:nil waitUntilDone:NO]; + [mHelper performSelectorOnMainThread:@selector(processEventsAndSchedule) withObject:nil waitUntilDone:NO]; } static UIReturnKeyType keyTypeForObject(QObject *obj) diff --git a/src/plugins/platforms/uikit/quikitintegration.mm b/src/plugins/platforms/uikit/quikitintegration.mm index ca020c9..02da97c 100644 --- a/src/plugins/platforms/uikit/quikitintegration.mm +++ b/src/plugins/platforms/uikit/quikitintegration.mm @@ -44,7 +44,7 @@ #include "quikitwindowsurface.h" #include "quikitscreen.h" #include "quikiteventloop.h" -#include "qgenericunixfontdatabase.h" +#include "qcoretextfontdatabase.h" #include <QtGui/QApplication> @@ -56,16 +56,6 @@ QT_BEGIN_NAMESPACE -class QUIKitFontDatabase : public QGenericUnixFontDatabase -{ -public: - virtual QString fontDir() const - { - return QString( [[[[NSBundle mainBundle] bundlePath] - stringByAppendingPathComponent:@"fonts"] UTF8String] ); - } -}; - static QUIKitIntegration *m_instance = 0; QUIKitIntegration * QUIKitIntegration::instance() @@ -74,7 +64,7 @@ QUIKitIntegration * QUIKitIntegration::instance() } QUIKitIntegration::QUIKitIntegration() - :mFontDb(new QUIKitFontDatabase() ) + :mFontDb(new QCoreTextFontDatabase) { if (!m_instance) m_instance = this; diff --git a/src/plugins/platforms/uikit/quikitscreen.mm b/src/plugins/platforms/uikit/quikitscreen.mm index d7d8207..6d24193 100644 --- a/src/plugins/platforms/uikit/quikitscreen.mm +++ b/src/plugins/platforms/uikit/quikitscreen.mm @@ -56,14 +56,13 @@ QUIKitScreen::QUIKitScreen(int screenIndex) CGRect bounds = [uiScreen() bounds]; m_geometry = QRect(bounds.origin.x, bounds.origin.y, bounds.size.width, bounds.size.height); - m_format = QImage::Format_ARGB32; + m_format = QImage::Format_ARGB32_Premultiplied; m_depth = 24; const qreal inch = 25.4; qreal dpi = 160.; int dragDistance = 12; - int defaultFontPixelSize = 14; if ([[UIDevice currentDevice] userInterfaceIdiom] == UIUserInterfaceIdiomPad) { dpi = 132.; dragDistance = 10; @@ -71,8 +70,8 @@ QUIKitScreen::QUIKitScreen(int screenIndex) m_physicalSize = QSize(qRound(bounds.size.width * inch / dpi), qRound(bounds.size.height * inch / dpi)); qApp->setStartDragDistance(dragDistance); - QFont font(QLatin1String("Bitstream Vera Sans")); - font.setPixelSize(defaultFontPixelSize); + QFont font; // system font is helvetica, so that is fine already + font.setPixelSize([UIFont systemFontSize]); qApp->setFont(font); [pool release]; diff --git a/src/plugins/platforms/uikit/quikitwindow.mm b/src/plugins/platforms/uikit/quikitwindow.mm index 6e018fe..640b92e 100644 --- a/src/plugins/platforms/uikit/quikitwindow.mm +++ b/src/plugins/platforms/uikit/quikitwindow.mm @@ -53,6 +53,23 @@ #include <QtDebug> +static GLint stencilBits() +{ + static GLint bits; + static bool initialized = false; + if (!initialized) { + glGetIntegerv(GL_STENCIL_BITS, &bits); + initialized = true; + } + return bits; +} + +static GLint depthBits() +{ + // we can choose between GL_DEPTH24_STENCIL8_OES and GL_DEPTH_COMPONENT16 + return stencilBits() > 0 ? 24 : 16; +} + class EAGLPlatformContext : public QPlatformGLContext { public: @@ -60,13 +77,13 @@ public: : mView(view) { mFormat.setWindowApi(QPlatformWindowFormat::OpenGL); - mFormat.setDepthBufferSize(24); + mFormat.setDepthBufferSize(depthBits()); mFormat.setAccumBufferSize(0); mFormat.setRedBufferSize(8); mFormat.setGreenBufferSize(8); mFormat.setBlueBufferSize(8); mFormat.setAlphaBufferSize(8); - mFormat.setStencilBufferSize(8); + mFormat.setStencilBufferSize(stencilBits()); mFormat.setSamples(0); mFormat.setSampleBuffers(false); mFormat.setDoubleBuffer(true); @@ -74,7 +91,7 @@ public: mFormat.setRgba(true); mFormat.setAlpha(true); mFormat.setAccum(false); - mFormat.setStencil(true); + mFormat.setStencil(stencilBits() > 0); mFormat.setStereo(false); mFormat.setDirectRendering(false); @@ -203,9 +220,13 @@ private: glGenRenderbuffers(1, &mDepthRenderbuffer); glBindRenderbuffer(GL_RENDERBUFFER, mDepthRenderbuffer); - glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH24_STENCIL8_OES, mFramebufferWidth, mFramebufferHeight); + if (stencilBits() > 0) { + glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH24_STENCIL8_OES, mFramebufferWidth, mFramebufferHeight); + glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_STENCIL_ATTACHMENT, GL_RENDERBUFFER, mDepthRenderbuffer); + } else { + glRenderbufferStorage(GL_RENDERBUFFER, GL_DEPTH_COMPONENT16, mFramebufferWidth, mFramebufferHeight); + } glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_DEPTH_ATTACHMENT, GL_RENDERBUFFER, mDepthRenderbuffer); - glFramebufferRenderbuffer(GL_FRAMEBUFFER, GL_STENCIL_ATTACHMENT, GL_RENDERBUFFER, mDepthRenderbuffer); if (glCheckFramebufferStatus(GL_FRAMEBUFFER) != GL_FRAMEBUFFER_COMPLETE) NSLog(@"Failed to make complete framebuffer object %x", glCheckFramebufferStatus(GL_FRAMEBUFFER)); diff --git a/src/sql/models/qsqlrelationaltablemodel.cpp b/src/sql/models/qsqlrelationaltablemodel.cpp index 5b0406f..0edfaf4 100644 --- a/src/sql/models/qsqlrelationaltablemodel.cpp +++ b/src/sql/models/qsqlrelationaltablemodel.cpp @@ -710,24 +710,32 @@ void QSqlRelationalTableModel::clear() } -/*! \enum QSqlRelationalTableModel::JoinMode +/*! + \enum QSqlRelationalTableModel::JoinMode + \since 4.8 - \value InnerJoin - Inner join mode, return rows when there is at least one match in both tables. - \value LeftJoin - Left join mode, returns all rows from the left table (table_name1), even if there are no matches in the right table (table_name2). + This enum specifies the type of mode to use when joining two tables. - \see QSqlRelationalTableModel::setJoinMode - \since 4.8 + \value InnerJoin Inner join mode, return rows when there is at least one + match in both tables. + \value LeftJoin Left join mode, returns all rows from the left table + (table_name1), even if there are no matches in the right + table (table_name2). + + \sa QSqlRelationalTableModel::setJoinMode() */ /*! - Sets the SQL join mode to show or hide rows with NULL foreign keys. - In InnerJoin mode (the default) these rows will not be showed: use the + \since 4.8 + Sets the SQL join mode to the value given by \a joinMode to show or hide + rows with NULL foreign keys. + + In InnerJoin mode (the default) these rows will not be shown; use the LeftJoin mode if you want to show them. - \see QSqlRelationalTableModel::JoinMode - \since 4.8 + \sa QSqlRelationalTableModel::JoinMode */ -void QSqlRelationalTableModel::setJoinMode( QSqlRelationalTableModel::JoinMode joinMode ) +void QSqlRelationalTableModel::setJoinMode(QSqlRelationalTableModel::JoinMode joinMode) { Q_D(QSqlRelationalTableModel); d->joinMode = joinMode; diff --git a/src/svg/qsvgstructure.cpp b/src/svg/qsvgstructure.cpp index cc158ba..4d9fad5 100644 --- a/src/svg/qsvgstructure.cpp +++ b/src/svg/qsvgstructure.cpp @@ -369,7 +369,7 @@ QSvgNode * QSvgStructureNode::previousSiblingNode(QSvgNode *n) const { QSvgNode *prev = 0; QList<QSvgNode*>::const_iterator itr = m_renderers.constBegin(); - while (itr != m_renderers.constEnd()) { + for (; itr != m_renderers.constEnd(); ++itr) { QSvgNode *node = *itr; if (node == n) return prev; diff --git a/tests/auto/qabstractspinbox/tst_qabstractspinbox.cpp b/tests/auto/qabstractspinbox/tst_qabstractspinbox.cpp index d14c75b..4e93663 100644 --- a/tests/auto/qabstractspinbox/tst_qabstractspinbox.cpp +++ b/tests/auto/qabstractspinbox/tst_qabstractspinbox.cpp @@ -154,7 +154,7 @@ void tst_QAbstractSpinBox::task228728_cssselector() { //QAbstractSpinBox does some call to stylehint into his constructor. //so while the stylesheet want to access property, it should not crash - qApp->setStyleSheet("[alignement=\"1\"], [text=\"foo\"] { color:black; }" ); + qApp->setStyleSheet("[alignment=\"1\"], [text=\"foo\"] { color:black; }" ); QSpinBox box; } diff --git a/tests/auto/qaudioinput/tst_qaudioinput.cpp b/tests/auto/qaudioinput/tst_qaudioinput.cpp index 6025bdb..0004c42 100644 --- a/tests/auto/qaudioinput/tst_qaudioinput.cpp +++ b/tests/auto/qaudioinput/tst_qaudioinput.cpp @@ -86,14 +86,14 @@ void tst_QAudioInput::initTestCase() // Only perform tests if audio input device exists! QList<QAudioDeviceInfo> devices = QAudioDeviceInfo::availableDevices(QAudio::AudioInput); - if(devices.size() > 0) + if (devices.size() > 0) available = true; else { qWarning()<<"NOTE: no audio input device found, no test will be performed"; available = false; } - if(available) + if (available) audio = new QAudioInput(format, this); } @@ -124,6 +124,9 @@ void tst_QAudioInput::invalidFormat_data() void tst_QAudioInput::invalidFormat() { + if (!available) + QSKIP("No audio input device found, no test will be performed", SkipAll); + QFETCH(QAudioFormat, invalidFormat); QAudioInput audioInput(invalidFormat, this); @@ -140,81 +143,85 @@ void tst_QAudioInput::invalidFormat() void tst_QAudioInput::settings() { - if(available) { - // Confirm the setting we added in the init function. - QAudioFormat f = audio->format(); - - QVERIFY(format.channels() == f.channels()); - QVERIFY(format.frequency() == f.frequency()); - QVERIFY(format.sampleSize() == f.sampleSize()); - QVERIFY(format.codec() == f.codec()); - QVERIFY(format.byteOrder() == f.byteOrder()); - QVERIFY(format.sampleType() == f.sampleType()); - } + if (!available) + QSKIP("No audio input device found, no test will be performed", SkipAll); + + // Confirm the setting we added in the init function. + QAudioFormat f = audio->format(); + + QVERIFY(format.channels() == f.channels()); + QVERIFY(format.frequency() == f.frequency()); + QVERIFY(format.sampleSize() == f.sampleSize()); + QVERIFY(format.codec() == f.codec()); + QVERIFY(format.byteOrder() == f.byteOrder()); + QVERIFY(format.sampleType() == f.sampleType()); } void tst_QAudioInput::buffers() { - if(available) { - // Should always have a buffer size greater than zero. - int store = audio->bufferSize(); - audio->setBufferSize(4096); - QVERIFY(audio->bufferSize() > 0); - audio->setBufferSize(store); - QVERIFY(audio->bufferSize() == store); - } + if (!available) + QSKIP("No audio input device found, no test will be performed", SkipAll); + + // Should always have a buffer size greater than zero. + int store = audio->bufferSize(); + audio->setBufferSize(4096); + QVERIFY(audio->bufferSize() > 0); + audio->setBufferSize(store); + QVERIFY(audio->bufferSize() == store); } void tst_QAudioInput::notifyInterval() { - if(available) { - QVERIFY(audio->notifyInterval() == 1000); // Default + if (!available) + QSKIP("No audio input device found, no test will be performed", SkipAll); - audio->setNotifyInterval(500); - QVERIFY(audio->notifyInterval() == 500); // Custom + QVERIFY(audio->notifyInterval() == 1000); // Default - audio->setNotifyInterval(1000); // reset - } + audio->setNotifyInterval(500); + QVERIFY(audio->notifyInterval() == 500); // Custom + + audio->setNotifyInterval(1000); // reset } void tst_QAudioInput::pullFile() { - if(available) { - QFile filename(SRCDIR"test.raw"); - filename.open( QIODevice::WriteOnly | QIODevice::Truncate ); - - QSignalSpy readSignal(audio, SIGNAL(notify())); - QSignalSpy stateSignal(audio, SIGNAL(stateChanged(QAudio::State))); - - // Always have default states, before start - QVERIFY(audio->state() == QAudio::StoppedState); - QVERIFY(audio->error() == QAudio::NoError); - QVERIFY(audio->elapsedUSecs() == 0); - - audio->start(&filename); - QTest::qWait(20); - // Check state and periodSize() are valid non-zero values. - QVERIFY(audio->state() == QAudio::ActiveState); - QVERIFY(audio->error() == QAudio::NoError); - QVERIFY(audio->elapsedUSecs() > 10000 && audio->elapsedUSecs() < 800000); - QVERIFY(audio->periodSize() > 0); - QVERIFY(stateSignal.count() == 1); // State changed to QAudio::ActiveState - - // Wait until finished... - QTest::qWait(5000); - - QVERIFY(readSignal.count() > 0); - QVERIFY(audio->processedUSecs() > 0); - - audio->stop(); - QTest::qWait(20); - QVERIFY(audio->state() == QAudio::StoppedState); - QVERIFY(audio->elapsedUSecs() == 0); - // Can only check to make sure we got at least 1 more signal, but can be more. - QVERIFY(stateSignal.count() > 1); - - filename.close(); - } + if (!available) + QSKIP("No audio input device found, no test will be performed", SkipAll); + + QFile filename(SRCDIR"test.raw"); + filename.open( QIODevice::WriteOnly | QIODevice::Truncate ); + + QSignalSpy readSignal(audio, SIGNAL(notify())); + QSignalSpy stateSignal(audio, SIGNAL(stateChanged(QAudio::State))); + + // Always have default states, before start + QVERIFY(audio->state() == QAudio::StoppedState); + QVERIFY(audio->error() == QAudio::NoError); + QVERIFY(audio->elapsedUSecs() == 0); + + audio->start(&filename); + QTest::qWait(20); + // Check state and periodSize() are valid non-zero values. + QVERIFY(audio->state() == QAudio::ActiveState); + QVERIFY(audio->error() == QAudio::NoError); + QVERIFY(audio->elapsedUSecs() > 10000 && audio->elapsedUSecs() < 800000); + QVERIFY(audio->periodSize() > 0); + QVERIFY(stateSignal.count() == 1); // State changed to QAudio::ActiveState + + // Wait until finished... + QTest::qWait(5000); + + QVERIFY(readSignal.count() > 0); + QVERIFY(audio->processedUSecs() > 0); + + audio->stop(); + QTest::qWait(20); + QVERIFY(audio->state() == QAudio::StoppedState); + QVERIFY(audio->elapsedUSecs() == 0); + // Can only check to make sure we got at least 1 more signal, but can be more. + QVERIFY(stateSignal.count() > 1); + + filename.close(); } QTEST_MAIN(tst_QAudioInput) diff --git a/tests/auto/qdbusabstractinterface/com.trolltech.QtDBus.Pinger.xml b/tests/auto/qdbusabstractinterface/com.trolltech.QtDBus.Pinger.xml index 1667591..d945ec9 100644 --- a/tests/auto/qdbusabstractinterface/com.trolltech.QtDBus.Pinger.xml +++ b/tests/auto/qdbusabstractinterface/com.trolltech.QtDBus.Pinger.xml @@ -15,6 +15,10 @@ <annotation name="com.trolltech.QtDBus.QtTypeName.In0" value="RegisteredType"/> </signal> <method name="voidMethod" /> + <method name="sleepMethod"> + <arg type="i" /> + <arg type="i" direction="out"/> + </method> <method name="stringMethod"> <arg type="s" direction="out"/> </method> diff --git a/tests/auto/qdbusabstractinterface/interface.cpp b/tests/auto/qdbusabstractinterface/interface.cpp index 0326177..849db93 100644 --- a/tests/auto/qdbusabstractinterface/interface.cpp +++ b/tests/auto/qdbusabstractinterface/interface.cpp @@ -40,9 +40,23 @@ ****************************************************************************/ #include "interface.h" +#include <QThread> Interface::Interface() { } +// Export the sleep function +// TODO QT5: remove this class, QThread::msleep is now public +class FriendlySleepyThread : public QThread { +public: + using QThread::msleep; +}; + +int Interface::sleepMethod(int msec) +{ + FriendlySleepyThread::msleep(msec); + return 42; +} + #include "moc_interface.cpp" diff --git a/tests/auto/qdbusabstractinterface/interface.h b/tests/auto/qdbusabstractinterface/interface.h index b840a38..0fb15fe 100644 --- a/tests/auto/qdbusabstractinterface/interface.h +++ b/tests/auto/qdbusabstractinterface/interface.h @@ -101,6 +101,7 @@ public: public slots: Q_SCRIPTABLE void voidMethod() {} + Q_SCRIPTABLE int sleepMethod(int); Q_SCRIPTABLE QString stringMethod() { return "Hello, world"; } Q_SCRIPTABLE RegisteredType complexMethod() { return RegisteredType("Hello, world"); } Q_SCRIPTABLE QString multiOutMethod(int &value) { value = 42; return "Hello, world"; } diff --git a/tests/auto/qdbusabstractinterface/pinger.h b/tests/auto/qdbusabstractinterface/pinger.h index 6245a5a..739a142 100644 --- a/tests/auto/qdbusabstractinterface/pinger.h +++ b/tests/auto/qdbusabstractinterface/pinger.h @@ -117,6 +117,13 @@ public Q_SLOTS: // METHODS return reply; } + inline QDBusPendingReply<int> sleepMethod(int in0) + { + QList<QVariant> argumentList; + argumentList << qVariantFromValue(in0); + return asyncCallWithArgumentList(QLatin1String("sleepMethod"), argumentList); + } + inline QDBusPendingReply<QString> stringMethod() { QList<QVariant> argumentList; diff --git a/tests/auto/qdbusabstractinterface/tst_qdbusabstractinterface.cpp b/tests/auto/qdbusabstractinterface/tst_qdbusabstractinterface.cpp index 00e3a76..994df05 100644 --- a/tests/auto/qdbusabstractinterface/tst_qdbusabstractinterface.cpp +++ b/tests/auto/qdbusabstractinterface/tst_qdbusabstractinterface.cpp @@ -111,6 +111,8 @@ private slots: void makeAsyncComplexCallPeer(); void makeAsyncMultiOutCallPeer(); + void callWithTimeout(); + void stringPropRead(); void stringPropWrite(); void variantPropRead(); @@ -458,6 +460,96 @@ void tst_QDBusAbstractInterface::makeAsyncMultiOutCallPeer() QCoreApplication::instance()->processEvents(); } +static const char server_serviceName[] = "com.trolltech.autotests.dbusserver"; +static const char server_objectPath[] = "/com/trolltech/server"; +static const char server_interfaceName[] = "com.trolltech.QtDBus.Pinger"; + +class DBusServerThread : public QThread +{ +public: + DBusServerThread() { + start(); + m_ready.acquire(); + } + ~DBusServerThread() { + quit(); + wait(); + } + + void run() + { + QDBusConnection con = QDBusConnection::connectToBus(QDBusConnection::SessionBus, "ThreadConnection"); + if (!con.isConnected()) + qWarning("Error registering to DBus"); + if (!con.registerService(server_serviceName)) + qWarning("Error registering service name"); + Interface targetObj; + con.registerObject(server_objectPath, &targetObj, QDBusConnection::ExportScriptableContents); + m_ready.release(); + exec(); + + QDBusConnection::disconnectFromBus( con.name() ); + } +private: + QSemaphore m_ready; +}; + +void tst_QDBusAbstractInterface::callWithTimeout() +{ + QDBusConnection con = QDBusConnection::sessionBus(); + QVERIFY2(con.isConnected(), "Not connected to D-Bus"); + + DBusServerThread serverThread; + + QDBusMessage msg = QDBusMessage::createMethodCall(server_serviceName, + server_objectPath, server_interfaceName, "sleepMethod"); + msg << 100; + + { + // Call with no timeout -> works + QDBusMessage reply = con.call(msg); + QCOMPARE((int)reply.type(), (int)QDBusMessage::ReplyMessage); + QCOMPARE(reply.arguments().at(0).toInt(), 42); + } + + { + // Call with 1 sec timeout -> fails + QDBusMessage reply = con.call(msg, QDBus::Block, 1); + QCOMPARE(reply.type(), QDBusMessage::ErrorMessage); + } + + // Now using QDBusInterface + + QDBusInterface iface(server_serviceName, server_objectPath, server_interfaceName, con); + { + // Call with no timeout + QDBusMessage reply = iface.call("sleepMethod", 100); + QCOMPARE(reply.type(), QDBusMessage::ReplyMessage); + QCOMPARE(reply.arguments().at(0).toInt(), 42); + } + { + // Call with 1 sec timeout -> fails + iface.setTimeout(1); + QDBusMessage reply = iface.call("sleepMethod", 100); + QCOMPARE(reply.type(), QDBusMessage::ErrorMessage); + } + + // Now using generated code + com::trolltech::QtDBus::Pinger p(server_serviceName, server_objectPath, QDBusConnection::sessionBus()); + { + // Call with no timeout + QDBusReply<int> reply = p.sleepMethod(100); + QVERIFY(reply.isValid()); + QCOMPARE(int(reply), 42); + } + { + // Call with 1 sec timeout -> fails + p.setTimeout(1); + QDBusReply<int> reply = p.sleepMethod(100); + QVERIFY(!reply.isValid()); + } +} + void tst_QDBusAbstractInterface::stringPropRead() { Pinger p = getPinger(); diff --git a/tests/auto/qdialog/tst_qdialog.cpp b/tests/auto/qdialog/tst_qdialog.cpp index 6d9f798..86dde21 100644 --- a/tests/auto/qdialog/tst_qdialog.cpp +++ b/tests/auto/qdialog/tst_qdialog.cpp @@ -467,6 +467,22 @@ void tst_QDialog::throwInExec() #if defined(Q_WS_MAC) || (defined(Q_WS_WINCE) && defined(_ARM_)) QSKIP("Throwing exceptions in exec() is not supported on this platform.", SkipAll); #endif + +#if defined(Q_OS_LINUX) + // C++ exceptions can't be passed through glib callbacks. Skip the test if + // we're using the glib event loop. + QByteArray dispatcher = QAbstractEventDispatcher::instance()->metaObject()->className(); + if (dispatcher.contains("Glib")) { + QSKIP( + qPrintable(QString( + "Throwing exceptions in exec() won't work if %1 event dispatcher is used.\n" + "Try running with QT_NO_GLIB=1 in environment." + ).arg(QString::fromLatin1(dispatcher))), + SkipAll + ); + } +#endif + int caughtExceptions = 0; try { ExceptionDialog dialog; diff --git a/tests/auto/qdir/tst_qdir.cpp b/tests/auto/qdir/tst_qdir.cpp index 0a42a97..419eaae 100644 --- a/tests/auto/qdir/tst_qdir.cpp +++ b/tests/auto/qdir/tst_qdir.cpp @@ -444,9 +444,15 @@ void tst_QDir::QDir_default() void tst_QDir::compare() { // operator== + + // Not using QCOMPARE to test result of QDir::operator== + QDir dir; dir.makeAbsolute(); QVERIFY(dir == QDir::currentPath()); + + QVERIFY(QDir() == QDir(QDir::currentPath())); + QVERIFY(QDir("../") == QDir(QDir::currentPath() + "/..")); } static QStringList filterLinks(const QStringList &list) diff --git a/tests/auto/qfiledialog/tst_qfiledialog.cpp b/tests/auto/qfiledialog/tst_qfiledialog.cpp index 08d2e88..81da8a3 100644 --- a/tests/auto/qfiledialog/tst_qfiledialog.cpp +++ b/tests/auto/qfiledialog/tst_qfiledialog.cpp @@ -80,7 +80,9 @@ # define SRCDIR "C:/Private/" TOSTRING(SYMBIAN_SRCDIR_UID) "/" #elif defined(Q_OS_UNIX) #ifdef QT_BUILD_INTERNAL +QT_BEGIN_NAMESPACE extern Q_GUI_EXPORT QString qt_tildeExpansion(const QString &path, bool *expanded = 0); +QT_END_NAMESPACE #endif #endif diff --git a/tests/auto/qpushbutton/tst_qpushbutton.cpp b/tests/auto/qpushbutton/tst_qpushbutton.cpp index 7742f6b..db4f385 100644 --- a/tests/auto/qpushbutton/tst_qpushbutton.cpp +++ b/tests/auto/qpushbutton/tst_qpushbutton.cpp @@ -91,6 +91,9 @@ private slots: void animateClick(); void toggle(); void clicked(); +#ifdef Q_OS_MAC + void macClicked(); +#endif void toggled(); void isEnabled(); void defaultAndAutoDefault(); @@ -469,6 +472,34 @@ void tst_QPushButton::clicked() QCOMPARE( release_count, (uint)10 ); } +#ifdef Q_OS_MAC +// test that the corners of a mac style button are not treated as clicks. +// but that if a style is applied, they are. +void tst_QPushButton::macClicked() +{ + QPushButton *macTestWidget = new QPushButton( "Push button" ); + macTestWidget->show(); + connect( macTestWidget, SIGNAL(clicked()), this, SLOT(onClicked()) ); + + QTest::mouseClick( macTestWidget, Qt::LeftButton, 0, QPoint(1,1) ); + QVERIFY( click_count == 0 ); + + QTest::mouseClick( macTestWidget, Qt::LeftButton, 0, macTestWidget->rect().center() ); + QVERIFY( click_count == 1 ); + + resetCounters(); + macTestWidget->setStyleSheet("background: white;"); + + QTest::mouseClick( macTestWidget, Qt::LeftButton, 0, QPoint(1,1) ); + QVERIFY( click_count == 1 ); + + QTest::mouseClick( macTestWidget, Qt::LeftButton, 0, macTestWidget->rect().center() ); + QVERIFY( click_count == 2 ); + + delete macTestWidget; +} +#endif + /* void tst_QPushButton::group() { diff --git a/tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp b/tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp index 2edb93a..c9d4ba4 100644 --- a/tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp +++ b/tests/auto/qtemporaryfile/tst_qtemporaryfile.cpp @@ -69,13 +69,7 @@ class tst_QTemporaryFile : public QObject { Q_OBJECT -public: - tst_QTemporaryFile(); - virtual ~tst_QTemporaryFile(); public slots: - void init(); - void cleanup(); - void initTestCase(); void cleanupTestCase(); @@ -100,22 +94,17 @@ private slots: void resetTemplateAfterError(); void setTemplateAfterOpen(); void autoRemoveAfterFailedRename(); - - void QTBUG_4796_data(); - void QTBUG_4796(); - -public: }; void tst_QTemporaryFile::initTestCase() { - // For QTBUG_4796 + // For fileTemplate tests QVERIFY(QDir("test-XXXXXX").exists() || QDir().mkdir("test-XXXXXX")); } void tst_QTemporaryFile::cleanupTestCase() { - // From QTBUG_4796 + // From fileTemplate tests QVERIFY(QDir().rmdir("test-XXXXXX")); } @@ -139,76 +128,6 @@ void tst_QTemporaryFile::getSetCheck() QCOMPARE(true, obj1.autoRemove()); } -tst_QTemporaryFile::tst_QTemporaryFile() -{ -} - -tst_QTemporaryFile::~tst_QTemporaryFile() -{ - -} - -void tst_QTemporaryFile::init() -{ -// TODO: Add initialization code here. -// This will be executed immediately before each test is run. -} - -void tst_QTemporaryFile::cleanup() -{ -// TODO: Add cleanup code here. -// This will be executed immediately after each test is run. -} - -void tst_QTemporaryFile::fileTemplate_data() -{ - QTest::addColumn<QString>("constructorTemplate"); - QTest::addColumn<QString>("prefix"); - QTest::addColumn<QString>("suffix"); - QTest::addColumn<QString>("fileTemplate"); - - QTest::newRow("constructor default") << "" << "." << "" << ""; - QTest::newRow("constructor with xxx sufix") << "qt_XXXXXXxxx" << "qt_" << "xxx" << ""; - QTest::newRow("constructor with xXx sufix") << "qt_XXXXXXxXx" << "qt_" << "xXx" << ""; - QTest::newRow("constructor with no sufix") << "qt_XXXXXX" << "qt_" << "" << ""; - QTest::newRow("constructor with >6 X's and xxx suffix") << "qt_XXXXXXXXXXxxx" << "qt_" << "xxx" << ""; - QTest::newRow("constructor with >6 X's, no suffix") << "qt_XXXXXXXXXX" << "qt_" << "" << ""; - - QTest::newRow("constructor with XXXX suffix") << "qt_XXXXXX_XXXX" << "qt_" << "_XXXX" << ""; - QTest::newRow("constructor with XXXXX suffix") << "qt_XXXXXX_XXXXX" << "qt_" << "_XXXXX" << ""; - QTest::newRow("constructor with XXXX prefix") << "qt_XXXX" << "qt_XXXX." << "" << ""; - QTest::newRow("constructor with XXXXX prefix") << "qt_XXXXX" << "qt_XXXXX." << "" << ""; - QTest::newRow("constructor with XXXX prefix and suffix") << "qt_XXXX_XXXXXX_XXXX" << "qt_XXXX_" << "_XXXX" << ""; - QTest::newRow("constructor with XXXXX prefix and suffix") << "qt_XXXXX_XXXXXX_XXXXX" << "qt_XXXXX_" << "_XXXXX" << ""; - - QTest::newRow("set template, no suffix") << "" << "foo" << "" << "foo"; - QTest::newRow("set template, with lowercase XXXXXX") << "" << "qt_" << "xxxxxx" << "qt_XXXXXXxxxxxx"; - QTest::newRow("set template, with xxx") << "" << "qt_" << ".xxx" << "qt_XXXXXX.xxx"; - QTest::newRow("set template, with >6 X's") << "" << "qt_" << ".xxx" << "qt_XXXXXXXXXXXXXX.xxx"; - QTest::newRow("set template, with >6 X's, no suffix") << "" << "qt_" << "" << "qt_XXXXXXXXXXXXXX"; -} - -void tst_QTemporaryFile::fileTemplate() -{ - QFETCH(QString, constructorTemplate); - QFETCH(QString, prefix); - QFETCH(QString, suffix); - QFETCH(QString, fileTemplate); - - QTemporaryFile file(constructorTemplate); - if (!fileTemplate.isEmpty()) - file.setFileTemplate(fileTemplate); - - QCOMPARE(file.open(), true); - - if (prefix.length()) - QCOMPARE(file.fileName().left(prefix.length()), prefix); - - if (suffix.length()) - QCOMPARE(file.fileName().right(suffix.length()), suffix); -} - - /* This tests whether the temporary file really gets placed in QDir::tempPath */ @@ -411,11 +330,11 @@ void tst_QTemporaryFile::rename() { QTemporaryFile file(dir.filePath("temporary-file.XXXXXX")); - QVERIFY(file.open()); + QVERIFY2(file.open(), qPrintable(file.errorString())); tempname = file.fileName(); QVERIFY(dir.exists(tempname)); - QVERIFY(file.rename("temporary-file.txt")); + QVERIFY2(file.rename("temporary-file.txt"), qPrintable(file.errorString())); QVERIFY(!dir.exists(tempname)); QVERIFY(dir.exists("temporary-file.txt")); QCOMPARE(file.fileName(), QString("temporary-file.txt")); @@ -622,7 +541,7 @@ void tst_QTemporaryFile::autoRemoveAfterFailedRename() cleaner.reset(); } -void tst_QTemporaryFile::QTBUG_4796_data() +void tst_QTemporaryFile::fileTemplate_data() { QTest::addColumn<QString>("prefix"); QTest::addColumn<QString>("suffix"); @@ -631,15 +550,33 @@ void tst_QTemporaryFile::QTBUG_4796_data() QString unicode = QString::fromUtf8("\xc3\xa5\xc3\xa6\xc3\xb8"); QTest::newRow("<empty>") << QString() << QString() << true; + + QTest::newRow(".") << QString(".") << QString() << true; + QTest::newRow("..") << QString("..") << QString() << true; + + QTest::newRow("foo") << QString("foo") << QString() << true; + QTest::newRow("qt_ ... xxxxxx") << QString("qt_") << QString("xxxxxx") << true; + QTest::newRow("qt_ ... xxx") << QString("qt_") << QString("xxx") << true; + QTest::newRow("qt_ ... xXx") << QString("qt_") << QString("xXx") << true; + QTest::newRow("qt_ ...") << QString("qt_") << QString() << true; + QTest::newRow("qt_ ... _XXXX") << QString("qt_") << QString("_XXXX") << true; + QTest::newRow("qt_ ... _XXXXX") << QString("qt_") << QString("_XXXXX") << true; + QTest::newRow("qt_XXXX_ ...") << QString("qt_XXXX_") << QString() << true; + QTest::newRow("qt_XXXXX_ ...") << QString("qt_XXXXX_") << QString() << true; + QTest::newRow("qt_XXXX_ ... _XXXX") << QString("qt_XXXX_") << QString("_XXXX") << true; + QTest::newRow("qt_XXXXX_ ... _XXXXX") << QString("qt_XXXXX_") << QString("_XXXXX") << true; + QTest::newRow("blaXXXXXX") << QString("bla") << QString() << true; QTest::newRow("XXXXXXbla") << QString() << QString("bla") << true; + QTest::newRow("does-not-exist/qt_temp.XXXXXX") << QString("does-not-exist/qt_temp") << QString() << false; + QTest::newRow("XXXXXX<unicode>") << QString() << unicode << true; QTest::newRow("<unicode>XXXXXX") << unicode << QString() << true; QTest::newRow("<unicode>XXXXXX<unicode>") << unicode << unicode << true; } -void tst_QTemporaryFile::QTBUG_4796() +void tst_QTemporaryFile::fileTemplate() { QVERIFY(QDir("test-XXXXXX").exists()); @@ -665,25 +602,56 @@ void tst_QTemporaryFile::QTBUG_4796() QFETCH(QString, suffix); QFETCH(bool, openResult); + enum IterationType { + UseConstructor, + UseSetFileTemplate, + Done + }; + + for (IterationType setFileTemplate = UseConstructor; setFileTemplate != Done; + setFileTemplate = IterationType(int(setFileTemplate) + 1)) { + Q_FOREACH(QString const &tempName, cleaner.tempNames) + QVERIFY( !QFile::exists(tempName) ); + + cleaner.reset(); + QString fileTemplate1 = prefix + QString("XX") + suffix; QString fileTemplate2 = prefix + QString("XXXX") + suffix; QString fileTemplate3 = prefix + QString("XXXXXX") + suffix; QString fileTemplate4 = prefix + QString("XXXXXXXX") + suffix; - QTemporaryFile file1(fileTemplate1); - QTemporaryFile file2(fileTemplate2); - QTemporaryFile file3(fileTemplate3); - QTemporaryFile file4(fileTemplate4); - QTemporaryFile file5("test-XXXXXX/" + fileTemplate1); - QTemporaryFile file6("test-XXXXXX/" + fileTemplate3); + QTemporaryFile file1(setFileTemplate ? QString() : fileTemplate1); + QTemporaryFile file2(setFileTemplate ? QString() : fileTemplate2); + QTemporaryFile file3(setFileTemplate ? QString() : fileTemplate3); + QTemporaryFile file4(setFileTemplate ? QString() : fileTemplate4); + QTemporaryFile file5(setFileTemplate ? QString() : "test-XXXXXX/" + fileTemplate1); + QTemporaryFile file6(setFileTemplate ? QString() : "test-XXXXXX/" + fileTemplate3); + + if (setFileTemplate) { + file1.setFileTemplate(fileTemplate1); + file2.setFileTemplate(fileTemplate2); + file3.setFileTemplate(fileTemplate3); + file4.setFileTemplate(fileTemplate4); + file5.setFileTemplate("test-XXXXXX/" + fileTemplate1); + file6.setFileTemplate("test-XXXXXX/" + fileTemplate3); + } - QCOMPARE(file1.open(), openResult); - QCOMPARE(file2.open(), openResult); - QCOMPARE(file3.open(), openResult); - QCOMPARE(file4.open(), openResult); - QCOMPARE(file5.open(), openResult); - QCOMPARE(file6.open(), openResult); + if (openResult) { + QVERIFY2(file1.open(), qPrintable(file1.errorString())); + QVERIFY2(file2.open(), qPrintable(file2.errorString())); + QVERIFY2(file3.open(), qPrintable(file3.errorString())); + QVERIFY2(file4.open(), qPrintable(file4.errorString())); + QVERIFY2(file5.open(), qPrintable(file5.errorString())); + QVERIFY2(file6.open(), qPrintable(file6.errorString())); + } else { + QVERIFY(!file1.open()); + QVERIFY(!file2.open()); + QVERIFY(!file3.open()); + QVERIFY(!file4.open()); + QVERIFY(!file5.open()); + QVERIFY(!file6.open()); + } QCOMPARE(file1.exists(), openResult); QCOMPARE(file2.exists(), openResult); @@ -701,28 +669,31 @@ void tst_QTemporaryFile::QTBUG_4796() << file5.fileName() << file6.fileName(); - QVERIFY(file1.fileName().startsWith(fileTemplate1 + QLatin1Char('.'))); - QVERIFY(file2.fileName().startsWith(fileTemplate2 + QLatin1Char('.'))); - QVERIFY(file5.fileName().startsWith("test-XXXXXX/" + fileTemplate1 + QLatin1Char('.'))); - QVERIFY(file6.fileName().startsWith("test-XXXXXX/" + prefix)); + QDir currentDir; + QString fileName1 = currentDir.relativeFilePath(file1.fileName()); + QString fileName2 = currentDir.relativeFilePath(file2.fileName()); + QString fileName3 = currentDir.relativeFilePath(file3.fileName()); + QString fileName4 = currentDir.relativeFilePath(file4.fileName()); + QString fileName5 = currentDir.relativeFilePath(file5.fileName()); + QString fileName6 = currentDir.relativeFilePath(file6.fileName()); + + QVERIFY2(fileName1.startsWith(fileTemplate1 + QLatin1Char('.')), qPrintable(file1.fileName())); + QVERIFY2(fileName2.startsWith(fileTemplate2 + QLatin1Char('.')), qPrintable(file2.fileName())); + QVERIFY2(fileName5.startsWith("test-XXXXXX/" + fileTemplate1 + QLatin1Char('.')), qPrintable(file5.fileName())); + QVERIFY2(fileName6.startsWith("test-XXXXXX/" + prefix), qPrintable(file6.fileName())); if (!prefix.isEmpty()) { - QVERIFY(file3.fileName().startsWith(prefix)); - QVERIFY(file4.fileName().startsWith(prefix)); + QVERIFY2(fileName3.startsWith(prefix), qPrintable(file3.fileName())); + QVERIFY2(fileName4.startsWith(prefix), qPrintable(file4.fileName())); } if (!suffix.isEmpty()) { - QVERIFY(file3.fileName().endsWith(suffix)); - QVERIFY(file4.fileName().endsWith(suffix)); - QVERIFY(file6.fileName().endsWith(suffix)); + QVERIFY2(fileName3.endsWith(suffix), qPrintable(file3.fileName())); + QVERIFY2(fileName4.endsWith(suffix), qPrintable(file4.fileName())); + QVERIFY2(fileName6.endsWith(suffix), qPrintable(file6.fileName())); } } } - - Q_FOREACH(QString const &tempName, cleaner.tempNames) - QVERIFY( !QFile::exists(tempName) ); - - cleaner.reset(); } QTEST_MAIN(tst_QTemporaryFile) diff --git a/tools/macdeployqt/shared/shared.cpp b/tools/macdeployqt/shared/shared.cpp index 1a9a6ab..156f1de 100644 --- a/tools/macdeployqt/shared/shared.cpp +++ b/tools/macdeployqt/shared/shared.cpp @@ -127,7 +127,7 @@ FrameworkInfo parseOtoolLibraryLine(const QString &line, bool useDebugLibs) while (part < parts.count()) { const QString currentPart = parts.at(part).simplified() ; ++part; - if (currentPart == "") + if (currentPart.isEmpty()) continue; if (state == QtPath) { diff --git a/tools/macdeployqt/tests/tst_deployment_mac.cpp b/tools/macdeployqt/tests/tst_deployment_mac.cpp index 858dc45..5921199 100644 --- a/tools/macdeployqt/tests/tst_deployment_mac.cpp +++ b/tools/macdeployqt/tests/tst_deployment_mac.cpp @@ -230,4 +230,4 @@ void tst_deployment_mac::testFindAppBinarty() QTEST_MAIN(tst_deployment_mac) -#include "tst_deployment_mac.moc"
\ No newline at end of file +#include "tst_deployment_mac.moc" diff --git a/tools/qdoc3/ditaxmlgenerator.cpp b/tools/qdoc3/ditaxmlgenerator.cpp index b801e1e..fc66923 100644 --- a/tools/qdoc3/ditaxmlgenerator.cpp +++ b/tools/qdoc3/ditaxmlgenerator.cpp @@ -2117,9 +2117,10 @@ DitaXmlGenerator::generateClassLikeNode(const InnerNode* inner, CodeMarker* mark generateSince(qcn, marker); enterSection("h2","Detailed Description"); generateBody(qcn, marker); - if (cn) + if (cn) { generateQmlText(cn->doc().body(), cn, marker, qcn->name()); - generateAlsoList(cn, marker); + generateAlsoList(cn, marker); + } leaveSection(); leaveSection(); // </apiDesc> diff --git a/tools/qdoc3/doc/config/images/arrow_down.png b/tools/qdoc3/doc/config/images/arrow_down.png Binary files differnew file mode 100644 index 0000000..9d01e97 --- /dev/null +++ b/tools/qdoc3/doc/config/images/arrow_down.png diff --git a/tools/qdoc3/doc/config/images/bg_l.png b/tools/qdoc3/doc/config/images/bg_l.png Binary files differnew file mode 100755 index 0000000..90b1da1 --- /dev/null +++ b/tools/qdoc3/doc/config/images/bg_l.png diff --git a/tools/qdoc3/doc/config/images/bg_l_blank.png b/tools/qdoc3/doc/config/images/bg_l_blank.png Binary files differnew file mode 100755 index 0000000..5a9673d --- /dev/null +++ b/tools/qdoc3/doc/config/images/bg_l_blank.png diff --git a/tools/qdoc3/doc/config/images/bg_ll_blank.png b/tools/qdoc3/doc/config/images/bg_ll_blank.png Binary files differnew file mode 100644 index 0000000..95a1c45 --- /dev/null +++ b/tools/qdoc3/doc/config/images/bg_ll_blank.png diff --git a/tools/qdoc3/doc/config/images/bg_r.png b/tools/qdoc3/doc/config/images/bg_r.png Binary files differnew file mode 100755 index 0000000..f0fb121 --- /dev/null +++ b/tools/qdoc3/doc/config/images/bg_r.png diff --git a/tools/qdoc3/doc/config/images/bg_ul_blank.png b/tools/qdoc3/doc/config/images/bg_ul_blank.png Binary files differnew file mode 100644 index 0000000..7051261 --- /dev/null +++ b/tools/qdoc3/doc/config/images/bg_ul_blank.png diff --git a/tools/qdoc3/doc/config/images/box_bg.png b/tools/qdoc3/doc/config/images/box_bg.png Binary files differnew file mode 100755 index 0000000..3322f92 --- /dev/null +++ b/tools/qdoc3/doc/config/images/box_bg.png diff --git a/tools/qdoc3/doc/config/images/breadcrumb.png b/tools/qdoc3/doc/config/images/breadcrumb.png Binary files differnew file mode 100755 index 0000000..0ded551 --- /dev/null +++ b/tools/qdoc3/doc/config/images/breadcrumb.png diff --git a/tools/qdoc3/doc/config/images/bullet_dn.png b/tools/qdoc3/doc/config/images/bullet_dn.png Binary files differnew file mode 100644 index 0000000..f776247 --- /dev/null +++ b/tools/qdoc3/doc/config/images/bullet_dn.png diff --git a/tools/qdoc3/doc/config/images/bullet_gt.png b/tools/qdoc3/doc/config/images/bullet_gt.png Binary files differnew file mode 100755 index 0000000..7561b4e --- /dev/null +++ b/tools/qdoc3/doc/config/images/bullet_gt.png diff --git a/tools/qdoc3/doc/config/images/bullet_sq.png b/tools/qdoc3/doc/config/images/bullet_sq.png Binary files differnew file mode 100755 index 0000000..a84845e --- /dev/null +++ b/tools/qdoc3/doc/config/images/bullet_sq.png diff --git a/tools/qdoc3/doc/config/images/bullet_up.png b/tools/qdoc3/doc/config/images/bullet_up.png Binary files differnew file mode 100644 index 0000000..7de2f06 --- /dev/null +++ b/tools/qdoc3/doc/config/images/bullet_up.png diff --git a/tools/qdoc3/doc/config/images/feedbackground.png b/tools/qdoc3/doc/config/images/feedbackground.png Binary files differnew file mode 100755 index 0000000..3a38d99 --- /dev/null +++ b/tools/qdoc3/doc/config/images/feedbackground.png diff --git a/tools/qdoc3/doc/config/images/header_bg.png b/tools/qdoc3/doc/config/images/header_bg.png Binary files differnew file mode 100644 index 0000000..a436aa6 --- /dev/null +++ b/tools/qdoc3/doc/config/images/header_bg.png diff --git a/tools/qdoc3/doc/config/images/horBar.png b/tools/qdoc3/doc/config/images/horBar.png Binary files differnew file mode 100755 index 0000000..100fe91 --- /dev/null +++ b/tools/qdoc3/doc/config/images/horBar.png diff --git a/tools/qdoc3/doc/config/images/page.png b/tools/qdoc3/doc/config/images/page.png Binary files differnew file mode 100644 index 0000000..1db151b --- /dev/null +++ b/tools/qdoc3/doc/config/images/page.png diff --git a/tools/qdoc3/doc/config/images/page_bg.png b/tools/qdoc3/doc/config/images/page_bg.png Binary files differnew file mode 100755 index 0000000..9b3bd99 --- /dev/null +++ b/tools/qdoc3/doc/config/images/page_bg.png diff --git a/tools/qdoc3/doc/config/images/spinner.gif b/tools/qdoc3/doc/config/images/spinner.gif Binary files differnew file mode 100644 index 0000000..1ed786f --- /dev/null +++ b/tools/qdoc3/doc/config/images/spinner.gif diff --git a/tools/qdoc3/doc/config/images/sprites-combined.png b/tools/qdoc3/doc/config/images/sprites-combined.png Binary files differnew file mode 100755 index 0000000..3a48b21 --- /dev/null +++ b/tools/qdoc3/doc/config/images/sprites-combined.png diff --git a/tools/qdoc3/puredocparser.cpp b/tools/qdoc3/puredocparser.cpp index c7db1bf..0f21cbc 100644 --- a/tools/qdoc3/puredocparser.cpp +++ b/tools/qdoc3/puredocparser.cpp @@ -55,6 +55,11 @@ PureDocParser::~PureDocParser() { } +QString PureDocParser::language() +{ + return "qdoc"; +} + QStringList PureDocParser::sourceFileNameFilter() { return QStringList("*.qdoc"); diff --git a/tools/qdoc3/puredocparser.h b/tools/qdoc3/puredocparser.h index 7f0434d..814c829 100644 --- a/tools/qdoc3/puredocparser.h +++ b/tools/qdoc3/puredocparser.h @@ -64,6 +64,7 @@ public: PureDocParser(); virtual ~PureDocParser(); + virtual QString language(); virtual QStringList sourceFileNameFilter(); }; diff --git a/tools/qdoc3/qmlvisitor.cpp b/tools/qdoc3/qmlvisitor.cpp index 98e188d..a8886de 100644 --- a/tools/qdoc3/qmlvisitor.cpp +++ b/tools/qdoc3/qmlvisitor.cpp @@ -69,18 +69,30 @@ QmlDocVisitor::~QmlDocVisitor() QDeclarativeJS::AST::SourceLocation QmlDocVisitor::precedingComment(quint32 offset) const { - QDeclarativeJS::AST::SourceLocation currentLoc; + QListIterator<QDeclarativeJS::AST::SourceLocation> it(engine->comments()); + it.toBack(); - foreach (const QDeclarativeJS::AST::SourceLocation &loc, engine->comments()) { - if (loc.begin() >= offset) + while (it.hasPrevious()) { + + QDeclarativeJS::AST::SourceLocation loc = it.previous(); + + if (loc.begin() <= lastEndOffset) + // Return if we reach the end of the preceding structure. break; - else if (loc.begin() > lastEndOffset && loc.end() < offset) - currentLoc = loc; - } - if (currentLoc.isValid()) { - QString comment = document.mid(currentLoc.offset, currentLoc.length); - if (comment.startsWith("!") || comment.startsWith("*")) - return currentLoc; + + else if (usedComments.contains(loc.begin())) + // Return if we encounter a previously used comment. + break; + + else if (loc.begin() > lastEndOffset && loc.end() < offset) { + + // Only examine multiline comments in order to avoid snippet markers. + if (document.mid(loc.offset - 1, 1) == "*") { + QString comment = document.mid(loc.offset, loc.length); + if (comment.startsWith("!") || comment.startsWith("*")) + return loc; + } + } } return QDeclarativeJS::AST::SourceLocation(); @@ -93,20 +105,18 @@ void QmlDocVisitor::applyDocumentation(QDeclarativeJS::AST::SourceLocation locat if (loc.isValid()) { QString source = document.mid(loc.offset, loc.length); - if (source.startsWith(QLatin1String("!")) || - (source.startsWith(QLatin1String("*")) && - source[1] != QLatin1Char('*'))) { - - Location start(filePath); - start.setLineNo(loc.startLine); - start.setColumnNo(loc.startColumn); - Location finish(filePath); - finish.setLineNo(loc.startLine); - finish.setColumnNo(loc.startColumn); - - Doc doc(start, finish, source.mid(1), commands); - node->setDoc(doc); - } + + Location start(filePath); + start.setLineNo(loc.startLine); + start.setColumnNo(loc.startColumn); + Location finish(filePath); + finish.setLineNo(loc.startLine); + finish.setColumnNo(loc.startColumn); + + Doc doc(start, finish, source.mid(1), commands); + node->setDoc(doc); + + usedComments.insert(loc.offset); } } @@ -152,6 +162,11 @@ bool QmlDocVisitor::visit(QDeclarativeJS::AST::UiImportList *imports) return true; } +void QmlDocVisitor::endVisit(QDeclarativeJS::AST::UiImportList *definition) +{ + lastEndOffset = definition->lastSourceLocation().end(); +} + /*! Visits public member declarations, such as signals and properties. These only include custom signals and properties. diff --git a/tools/qdoc3/qmlvisitor.h b/tools/qdoc3/qmlvisitor.h index 1d3a401..28821a9 100644 --- a/tools/qdoc3/qmlvisitor.h +++ b/tools/qdoc3/qmlvisitor.h @@ -57,6 +57,7 @@ public: virtual ~QmlDocVisitor(); bool visit(QDeclarativeJS::AST::UiImportList *imports); + void endVisit(QDeclarativeJS::AST::UiImportList *definition); bool visit(QDeclarativeJS::AST::UiObjectDefinition *definition); void endVisit(QDeclarativeJS::AST::UiObjectDefinition *definition); @@ -77,6 +78,7 @@ private: QString document; QList<QPair<QString, QString> > importList; QSet<QString> commands; + QSet<quint32> usedComments; Tree *tree; InnerNode *current; }; diff --git a/tools/qdoc3/test/qt-cpp-ignore.qdocconf b/tools/qdoc3/test/qt-cpp-ignore.qdocconf index 044eef4..5b41ae3 100644 --- a/tools/qdoc3/test/qt-cpp-ignore.qdocconf +++ b/tools/qdoc3/test/qt-cpp-ignore.qdocconf @@ -73,7 +73,8 @@ Cpp.ignoretokens = QAXFACTORY_EXPORT \ Q_DECLARATIVE_EXPORT \ Q_GADGET \ QWEBKIT_EXPORT \ - Q_INVOKABLE + Q_INVOKABLE \ + Q_DECL_CONSTEXPR Cpp.ignoredirectives = Q_DECLARE_HANDLE \ Q_DECLARE_INTERFACE \ Q_DECLARE_METATYPE \ diff --git a/tools/qdoc3/test/qt-html-templates-online.qdocconf b/tools/qdoc3/test/qt-html-templates-online.qdocconf index 03ed6fa..3584b68 100644 --- a/tools/qdoc3/test/qt-html-templates-online.qdocconf +++ b/tools/qdoc3/test/qt-html-templates-online.qdocconf @@ -181,16 +181,4 @@ HTML.footer = \ " <div id=\"blurpage\">\n" \ " </div>\n" \ "\n" \ - " <script src=\"scripts/functions.js\" type=\"text/javascript\"></script>\n" \ - " <script type=\"text/javascript\">\n" \ - " var _gaq = _gaq || [];\n" \ - " _gaq.push(['_setAccount', 'UA-4457116-5']);\n" \ - " _gaq.push(['_trackPageview']);\n" \ - " (function() {\n" \ - " var ga = document.createElement('script'); " \ - "ga.type = 'text/javascript'; ga.async = true;\n" \ - " ga.src = ('https:' == document.location.protocol ? 'https://ssl' : 'http://www') + " \ - "'.google-analytics.com/ga.js';\n" \ - " var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(ga, s);\n" \ - " })();\n" \ - " </script>\n" + " <script src=\"scripts/functions.js\" type=\"text/javascript\"></script>\n" diff --git a/tools/qdoc3/test/qt-project.qdocconf b/tools/qdoc3/test/qt-project.qdocconf index fca6545..57bf797 100644 --- a/tools/qdoc3/test/qt-project.qdocconf +++ b/tools/qdoc3/test/qt-project.qdocconf @@ -105,7 +105,7 @@ exampledirs = $QT_SOURCE_TREE/doc/src \ $QT_SOURCE_TREE/examples/tutorials \ $QT_SOURCE_TREE \ $QT_SOURCE_TREE/qmake/examples \ - $QT_SOURCE_TREE/src/3rdparty/webkit/WebKit/qt/docs + $QT_SOURCE_TREE/src/3rdparty/webkit/Source/WebKit/qt/docs imagedirs = $QT_SOURCE_TREE/doc/src/images \ $QT_SOURCE_TREE/examples \ $QT_SOURCE_TREE/doc/src/declarative/pics \ diff --git a/tools/qtconcurrent/codegenerator/src/codegenerator.cpp b/tools/qtconcurrent/codegenerator/src/codegenerator.cpp index b8436b9..c81fe97 100644 --- a/tools/qtconcurrent/codegenerator/src/codegenerator.cpp +++ b/tools/qtconcurrent/codegenerator/src/codegenerator.cpp @@ -134,7 +134,7 @@ const Compound operator+(const Item &a, const char * const text) const Compound operator+(const char * const text, const Item &b) { - return Compound(Text(text), b); + return Compound(Text(text), b); } -}
\ No newline at end of file +} diff --git a/tools/qtestlib/wince/cetest/deployment.h b/tools/qtestlib/wince/cetest/deployment.h index f3645e0..a5ef32d 100644 --- a/tools/qtestlib/wince/cetest/deployment.h +++ b/tools/qtestlib/wince/cetest/deployment.h @@ -72,4 +72,4 @@ private: inline void DeploymentHandler::setConnection(AbstractRemoteConnection *connection) { m_connection = connection; } inline AbstractRemoteConnection* DeploymentHandler::connection() const { return m_connection; } -#endif
\ No newline at end of file +#endif |
