diff options
Diffstat (limited to 'configure')
| -rwxr-xr-x | configure | 152 |
1 files changed, 126 insertions, 26 deletions
@@ -630,6 +630,7 @@ MIN_DBUS_1_VERSION=0.93 CFG_CONFIGURE_EXIT_ON_ERROR=yes CFG_PROFILE=no CFG_EXCEPTIONS=unspecified +CFG_GUI=auto # (yes|no|auto) CFG_SCRIPT=auto # (yes|no|auto) CFG_SCRIPTTOOLS=auto # (yes|no|auto) CFG_XMLPATTERNS=auto # (yes|no|auto) @@ -680,10 +681,10 @@ CFG_NOBUILD_PARTS="" CFG_RELEASE_QMAKE=no CFG_PHONON=auto CFG_PHONON_BACKEND=yes -CFG_MULTIMEDIA=yes -CFG_MEDIASERVICE=yes +CFG_MULTIMEDIA=auto +CFG_MEDIASERVICE=auto CFG_AUDIO_BACKEND=auto -CFG_SVG=yes +CFG_SVG=auto CFG_DECLARATIVE=auto CFG_WEBKIT=auto # (yes|no|auto) CFG_JAVASCRIPTCORE_JIT=auto @@ -1813,6 +1814,17 @@ while [ "$#" -gt 0 ]; do UNKNOWN_OPT=yes fi ;; + gui) + if [ "$VAL" = "yes" ] || [ "$VAL" = "auto" ]; then + CFG_GUI="yes" + else + if [ "$VAL" = "no" ]; then + CFG_GUI="no" + else + UNKNOWN_OPT=yes + fi + fi + ;; qdbus|dbus) if [ "$VAL" = "yes" ] || [ "$VAL" = "no" ] || [ "$VAL" = "linked" ]; then CFG_DBUS="$VAL" @@ -2170,6 +2182,10 @@ if [ "$CFG_QCONFIG" != "full" ] && [ "$CFG_QT3SUPPORT" = "yes" ]; then echo "Warning: '-qconfig $CFG_QCONFIG' will disable the qt3support library." CFG_QT3SUPPORT="no" fi +if [ "$CFG_GUI" = "no" ]; then + echo "Warning: -no-gui will disable the qt3support library." + CFG_QT3SUPPORT="no" +fi # update QT_CONFIG to show our current predefined configuration case "$CFG_QCONFIG" in @@ -3370,7 +3386,7 @@ Usage: $relconf [-h] [-prefix <dir>] [-prefix-install] [-bindir <dir>] [-libdir [-system-libmng] [-no-libjpeg] [-qt-libjpeg] [-system-libjpeg] [-make <part>] [-nomake <part>] [-R <string>] [-l <string>] [-no-rpath] [-rpath] [-continue] [-verbose] [-v] [-silent] [-no-nis] [-nis] [-no-cups] [-cups] [-no-iconv] - [-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked] + [-iconv] [-no-pch] [-pch] [-no-dbus] [-dbus] [-dbus-linked] [-no-gui] [-no-separate-debug-info] [-no-mmx] [-no-3dnow] [-no-sse] [-no-sse2] [-qtnamespace <namespace>] [-qtlibinfix <infix>] [-separate-debug-info] [-armfpa] [-no-optimized-qmake] [-optimized-qmake] [-no-xmlpatterns] [-xmlpatterns] @@ -3640,6 +3656,8 @@ Additional options: * -no-optimized-qmake ... Do not build qmake optimized. -optimized-qmake ...... Build qmake optimized. + -no-gui ............ Don't build the Qt GUI library + $NSN -no-nis ............ Do not compile NIS support. $NSY -nis ............... Compile NIS support. @@ -5085,6 +5103,15 @@ if [ "$CFG_DBUS" != "no" ]; then fi fi +if [ "$CFG_MULTIMEDIA" = "auto" ]; then + CFG_MULTIMEDIA="$CFG_GUI" +fi + +if [ "$CFG_MULTIMEDIA" = "yes" ] && [ "$CFG_GUI" = "no" ]; then + echo "QtMultimedia requested, but it can't be built without QtGui" + exit 1 +fi + # Generate a CRC of the namespace for using in constants for the Carbon port. # This should mean that you really *can* load two Qt's and have our custom # Carbon events work. @@ -5137,28 +5164,56 @@ if [ "$PLATFORM_X11" = "yes" -o "$PLATFORM_QWS" = "yes" ]; then fi fi - # Auto-detect GStreamer support (needed for both Phonon & QtMultimedia) - if [ "$CFG_GLIB" = "yes" -a "$CFG_GSTREAMER" != "no" ]; then - if [ -n "$PKG_CONFIG" ]; then - QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null` - QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null` + if [ "$CFG_GUI" = "no" ]; then + if [ "$CFG_PHONON" = "auto" ]; then + CFG_PHONON=no fi - if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/gstreamer "GStreamer" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER $X11TESTS_FLAGS; then - CFG_GSTREAMER=yes - QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER" - QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER" - else - if [ "$CFG_GSTREAMER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then - echo "Gstreamer support cannot be enabled due to functionality tests!" - echo " Turn on verbose messaging (-v) to $0 to see the final report." - echo " If you believe this message is in error you may use the continue" - echo " switch (-continue) to $0 to continue." - exit 101 + if [ "$CFG_PHONON" != "no" ]; then + echo "Phonon enabled, but GUI disabled." + echo " You might need to either enable the GUI or disable Phonon" + exit 1 + fi + fi + + if [ "$CFG_GUI" = "no" ]; then + if [ "$CFG_MEDIASERVICE" = "auto" ]; then + CFG_MEDIASERVICE=no + fi + if [ "$CFG_MEDIASERVICE" != "no" ]; then + echo "Mediaservice enabled, but GUI disabled." + echo " You might need to either enable the GUI or disable Mediaservice" + exit 1 + fi + elif [ "$CFG_MEDIASERVICE" = "auto" ]; then + CFG_MEDIASERVICE=yes + fi + + # Auto-detect GStreamer support (needed for both Phonon & QtMultimedia) + if [ "$CFG_PHONON" = "yes" -o "$CFG_MULTIMEDIA" = "yes" ]; then + if [ "$CFG_GLIB" = "yes" -a "$CFG_GSTREAMER" != "no" ]; then + if [ -n "$PKG_CONFIG" ]; then + QT_CFLAGS_GSTREAMER=`$PKG_CONFIG --cflags gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null` + QT_LIBS_GSTREAMER=`$PKG_CONFIG --libs gstreamer-0.10 gstreamer-plugins-base-0.10 2>/dev/null` + fi + if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/gstreamer "GStreamer" $L_FLAGS $I_FLAGS $l_FLAGS $QT_CFLAGS_GSTREAMER $QT_LIBS_GSTREAMER $X11TESTS_FLAGS; then + CFG_GSTREAMER=yes + QMakeVar set QT_CFLAGS_GSTREAMER "$QT_CFLAGS_GSTREAMER" + QMakeVar set QT_LIBS_GSTREAMER "$QT_LIBS_GSTREAMER" else - CFG_GSTREAMER=no + if [ "$CFG_GSTREAMER" = "yes" ] && [ "$CFG_CONFIGURE_EXIT_ON_ERROR" = "yes" ]; then + echo "Gstreamer support cannot be enabled due to functionality tests!" + echo " Turn on verbose messaging (-v) to $0 to see the final report." + echo " If you believe this message is in error you may use the continue" + echo " switch (-continue) to $0 to continue." + exit 101 + else + CFG_GSTREAMER=no + fi fi + elif [ "$CFG_GLIB" = "no" ]; then + CFG_GSTREAMER=no fi - elif [ "$CFG_GLIB" = "no" ]; then + else CFG_GSTREAMER=no fi @@ -5262,6 +5317,16 @@ if [ "$PLATFORM_X11" = "yes" ]; then fi # auto-detect OpenGL support (es1 = OpenGL ES 1.x Common, es2 = OpenGL ES 2.x) + if [ "$CFG_GUI" = "no" ]; then + if [ "$CFG_OPENGL" = "auto" ]; then + CFG_OPENGL=no + fi + if [ "$CFG_OPENGL" != "no" ]; then + echo "OpenGL enabled, but GUI disabled." + echo " You might need to either enable the GUI or disable OpenGL" + exit 1 + fi + fi if [ "$CFG_OPENGL" = "auto" ] || [ "$CFG_OPENGL" = "yes" ]; then if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/x11/opengl "OpenGL" $L_FLAGS $I_FLAGS $l_FLAGS $X11TESTS_FLAGS; then CFG_OPENGL=desktop @@ -5627,6 +5692,16 @@ fi if [ "$PLATFORM_QWS" = "yes" ]; then # auto-detect OpenGL support (es1 = OpenGL ES 1.x Common, es2 = OpenGL ES 2.x) + if [ "$CFG_GUI" = "no" ]; then + if [ "$CFG_OPENGL" = "auto" ]; then + CFG_OPENGL=no + fi + if [ "$CFG_OPENGL" != "no" ]; then + echo "OpenGL enabled, but GUI disabled." + echo " You might need to either enable the GUI or disable OpenGL" + exit 1 + fi + fi if [ "$CFG_OPENGL" = "yes" ]; then if "$unixtests/compile.test" "$XQMAKESPEC" "$QMAKE_CONFIG" $OPT_VERBOSE "$relpath" "$outpath" config.tests/unix/opengles2 "OpenGL ES 2.x" $L_FLAGS $I_FLAGS $l_FLAGS; then CFG_OPENGL=es2 @@ -6429,6 +6504,15 @@ elif [ "$CFG_LIBFREETYPE" = "system" ]; then else QT_CONFIG="$QT_CONFIG freetype" fi +if [ "$CFG_GUI" = "auto" ]; then + CFG_GUI="yes" +fi +if [ "$CFG_GUI" = "no" ]; then + QT_CONFIG="$QT_CONFIG no-gui" +else + QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_GUI" +fi + if [ "x$PLATFORM_MAC" = "xyes" ] && [ "$XPLATFORM" != "win32-g++" ]; then #On Mac we implicitly link against libz, so we @@ -6705,6 +6789,12 @@ EOF ;; esac +if [ "$CFG_GUI" = "no" ]; then + # WebKit requires QtGui + canBuildWebKit="no" +fi + + CFG_CONCURRENT="yes" if [ "$canBuildQtConcurrent" = "no" ]; then QCONFIG_FLAGS="$QCONFIG_FLAGS QT_NO_CONCURRENT" @@ -6739,6 +6829,15 @@ if [ "$CFG_AUDIO_BACKEND" = "yes" ]; then QT_CONFIG="$QT_CONFIG audio-backend" fi +if [ "$CFG_SVG" = "auto" ]; then + CFG_SVG=$CFG_GUI +fi + +if [ "$CFG_SVG" = "yes" ] && [ "$CFG_GUI" = "no" ]; then + echo "QtSvg requested, but it can't be built without QtGui" + exit 1 +fi + if [ "$CFG_SVG" = "yes" ]; then QT_CONFIG="$QT_CONFIG svg" else @@ -6786,13 +6885,13 @@ fi if [ "$CFG_DECLARATIVE" = "yes" ]; then - if [ "$CFG_SCRIPT" = "no" ]; then - echo "Error: QtDeclarative was requested, but it can't be built due to QtScript being disabled." + if [ "$CFG_SCRIPT" = "no" -o "$CFG_GUI" = "no" ]; then + echo "Error: QtDeclarative was requested, but it can't be built due to QtScript or QtGui being disabled." exit 1 fi fi if [ "$CFG_DECLARATIVE" = "auto" ]; then - if [ "$CFG_SCRIPT" = "no" ]; then + if [ "$CFG_SCRIPT" = "no" -o "$CFG_GUI" = "no" ]; then CFG_DECLARATIVE=no else CFG_DECLARATIVE=yes @@ -6910,7 +7009,7 @@ esac # minimal-config small-config medium-config large-config full-config # # Different edition modules: -# network canvas table xml opengl sql +# gui network canvas table xml opengl sql # # Things that do not affect the Qt API/ABI: # stl @@ -7677,6 +7776,7 @@ echo "Qt 3 compatibility ..... $CFG_QT3SUPPORT" [ "$CFG_DBUS" = "yes" ] && echo "QtDBus module .......... yes (run-time)" [ "$CFG_DBUS" = "linked" ] && echo "QtDBus module .......... yes (linked)" echo "QtConcurrent code ...... $CFG_CONCURRENT" +echo "QtGui module ........... $CFG_GUI" echo "QtScript module ........ $CFG_SCRIPT" echo "QtScriptTools module ... $CFG_SCRIPTTOOLS" echo "QtXmlPatterns module ... $CFG_XMLPATTERNS" |