diff options
Diffstat (limited to 'doc/src/internationalization/linguist-manual.qdoc')
| -rw-r--r-- | doc/src/internationalization/linguist-manual.qdoc | 1512 |
1 files changed, 1512 insertions, 0 deletions
diff --git a/doc/src/internationalization/linguist-manual.qdoc b/doc/src/internationalization/linguist-manual.qdoc new file mode 100644 index 0000000..8164dc4 --- /dev/null +++ b/doc/src/internationalization/linguist-manual.qdoc @@ -0,0 +1,1512 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.1, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** If you have questions regarding the use of this file, please contact +** Nokia at qt-info@nokia.com. +** +** +** +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \page linguist-manual.html + \title Qt Linguist Manual + \ingroup qttools + + \startpage {index.html}{Qt Reference Documentation} + \nextpage Qt Linguist Manual: Release Manager + + \keyword Qt Linguist + + Qt provides excellent support for translating applications into local + languages. This Guide explains how to use Qt's translation tools for + each of the roles involved in translating an application. The Guide + begins with a brief overview of the issues that must be considered, + followed by chapters devoted to each role and the supporting tools + provided. + + The \l{linguist-manager.html}{Release Manager} chapter is aimed + at the person with overall responsibility for the release of the + application. They will typically coordinate the work of the + software engineers and the translator. The chapter describes the + use of two tools. The \l{lupdate} tool is used to synchronize + source code and translations. The \l{lrelease} tool is used to + create runtime translation files for use by the released + application. + + The \l{linguist-translators.html}{Translators} chapter is for + translators. It describes the use of the \QL tool. + No computer knowledge beyond the ability to start a program and + use a text editor or word processor is required. + + The \l{linguist-programmers.html}{Programmers} chapter is for Qt + programmers. It explains how to create Qt applications that are + able to use translated text. It also provides guidance on how to + help the translator identify the context in which phrases appear. + This chapter's three short tutorials cover everything the + programmer needs to do. + + \section1 Overview of the Translation Process + + Most of the text that must be translated in an application program + consists of either single words or short phrases. These typically + appear as window titles, menu items, pop-up help text (balloon help), + and labels to buttons, check boxes and radio buttons. + + The phrases are entered into the source code by the programmer in + their native language using a simple but special syntax to identify + that the phrases require translation. The Qt tools provide context + information for each of the phrases to help the translator, and the + programmer is able to add additional context information to phrases + when necessary. The release manager generates a set of translation + files that are produced from the source files and passes these to the + translator. The translator opens the translation files using \QL, + enters their translations and saves the results back into + the translation files, which they pass back to the release manager. + The release manager then generates fast compact versions of these + translation files ready for use by the application. The tools are + designed to be used in repeated cycles as applications change and + evolve, preserving existing translations and making it easy to + identify which new translations are required. \QL also + provides a phrase book facility to help ensure consistent + translations across multiple applications and projects. + + Translators and programmers must address a number of issues because + of the subtleties and complexities of human language: + + \list + + \o A single phrase may need to be translated into several + different forms depending on context, e.g. \e open in English + might become \e{\ouml\c{}ffnen}, "open file", or \e aufbauen, + "open internet connection", in German. + + \o Keyboard accelerators may need to be changed but without + introducing conflicts, e.g. "\&Quit" in English becomes "Avslutt" + in Norwegian which doesn't contain a "Q". We cannot use a letter + that is already in use - unless we change several accelerators. + + \o Phrases that contain variables, for example, "The 25 files + selected will take 63 seconds to process", where the two numbers + are inserted programmatically at runtime may need to be reworded + because in a different language the word order and therefore the + placement of the variables may have to change. + + \endlist + + The Qt translation tools provide clear and simple solutions to these + issues. + + Chapters: + + \list + \o \l{Qt Linguist Manual: Release Manager}{Release Manager} + \o \l{Qt Linguist Manual: Translators}{Translators} + \o \l{Qt Linguist Manual: Programmers}{Programmers} + \o \l{Qt Linguist Manual: TS File Format}{TS File Format} + \endlist + + \QL and \c lupdate are able to import and export XML Localization + Interchange File Format (XLIFF) files, making it possible to take + advantage of tools and translation services that work with this + format. See the \l{Qt Linguist Manual: Translators} {Translators} + section for more information on working with these files. + + \table + + \row \o{1,2} \inlineimage wVista-Cert-border-small.png + \o \e{Qt Linguist 4.3 is Certified for Windows Vista} + + \row \o Windows Vista and the Windows Vista Start button are + trademarks or registered trademarks of Microsoft Corporation in + the United States and/or other countries. + + \endtable +*/ + +/*! + \page linguist-manager.html + \title Qt Linguist Manual: Release Manager + + \contentspage {Qt Linguist Manual}{Contents} + \previouspage Qt Linguist Manual + \nextpage Qt Linguist Manual: Translators + + \keyword lupdate + \keyword lrelease + + Two tools are provided for the release manager, \l lupdate and \l + lrelease. These tools can process \l qmake project files, or operate + directly on the file system. + + \section1 Qt Project Files + + The easiest method to use \l{#lupdate} {lupdate} and \l{#lrelease} + {lrelease} is by specifing a \c .pro Qt project file. There must + be an entry in the \c TRANSLATIONS section of the project file for + each language that is additional to the native language. A typical + entry looks like this: + + \snippet examples/linguist/arrowpad/arrowpad.pro 1 + + Using a locale within the translation file name is useful for + determining which language to load at runtime. This is explained + in the \l{linguist-programmers.html} {Programmers} chapter. + + An example of a complete \c .pro file with four translation source + files: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 0 + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 1 + + QTextCodec::setCodecForTr() makes it possible to choose a 8-bit + encoding for literal strings that appear within \c tr() calls. + This is useful for applications whose source language is, for + example, Chinese or Japanese. If no encoding is set, \c tr() uses + Latin1. + + If you do use the QTextCodec::codecForTr() mechanism in your + application, \QL needs you to set the \c CODECFORTR + entry in the \c .pro file as well. For example: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 1 + + Also, if your compiler uses a different encoding for its runtime + system as for its source code and you want to use non-ASCII + characters in string literals, you will need to set the \c + CODECFORSRC. For example: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 2 + + Microsoft Visual Studio 2005 .NET appears to be the only compiler + for which this is necessary. However, if you want to write + portable code, we recommend that you avoid non-ASCII characters + in your source files. You can still specify non-ASCII characters + portably using escape sequences, for example: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 3 + + \target lupdate manual + \section1 lupdate + + Usage: \c {lupdate myproject.pro} + + \l lupdate is a command line tool that finds the translatable + strings in the specified source, header and \e {Qt Designer} + interface files, and produces or updates \c .ts translation + files. The files to process and the files to update can be set at + the command line, or provided in a \c .pro file specified as an + command line argument. The produced translation files are given to + the translator who uses \QL to read the files and insert the + translations. + + Companies that have their own translators in-house may find it + useful to run \l lupdate regularly, perhaps monthly, as the + application develops. This will lead to a fairly low volume of + translation work spread evenly over the life of the project and + will allow the translators to support a number of projects + simultaneously. + + Companies that hire in translators as required may prefer to run + \l lupdate only a few times in the application's life cycle, the + first time might be just before the first test phase. This will + provide the translator with a substantial single block of work and + any bugs that the translator detects may easily be included with + those found during the initial test phase. The second and any + subsequent \l lupdate runs would probably take place during the + final beta phase. + + The TS file format is a simple human-readable XML format that + can be used with version control systems if required. \c lupdate + can also process Localization Interchange File Format (XLIFF) + format files; files in this format typically have file names that + end with the \c .xlf suffix. + + Pass the \c -help option to \c lupdate to obtain the list of + supported options: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 4 + + \QL is also able to import and export XLIFF files. See the + \l{Qt Linguist Manual: Translators}{Translators} section for more + information. + + \section1 lrelease + + Usage: \c {lrelease myproject.pro} + + \l lrelease is a command line tool that produces QM files out + of TS files. The QM file format is a compact binary format + that is used by the localized application. It provides extremely + fast lookups for translations. The TS files \l lrelease + processes can be specified at the command line, or given + indirectly by a Qt \c .pro project file. + + This tool is run whenever a release of the application is to be + made, from initial test version through to final release + version. If the QM files are not created, e.g. because an + alpha release is required before any translation has been + undertaken, the application will run perfectly well using the text + the programmers placed in the source files. Once the QM files + are available the application will detect them and use them + automatically. + + Note that lrelease will only incorporate translations that are + marked as "finished". Otherwise the original text will be used + instead. + + Pass the \c -help option to \c lrelease to obtain the list of + supported options: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 5 + + \section1 Missing Translations + + Both \l lupdate and \l lrelease may be used with TS + translation source files which are incomplete. Missing + translations will be replaced with the native language phrases at + runtime. +*/ + +/*! + \page linguist-translators.html + \title Qt Linguist Manual: Translators + + \contentspage {Qt Linguist Manual}{Contents} + \previouspage Qt Linguist Manual: Release Manager + \nextpage Qt Linguist Manual: Programmers + + Contents + + \tableofcontents + + \section1 The One Minute Guide to Using Qt Linguist + + \QL is a tool for adding translations to Qt applications. Run \QL + from the taskbar menu, or by double clicking the desktop icon, or + by entering the command \c {linguist} at the command line. Once + \QL has started, choose \menu{File|Open} from the \l{menubar} + {menu bar} and select a translation source (TS file) to + load. If you do not have a TS file, see the \l {Qt Linguist + Manual: Release Manager} {release manager manual} to learn how to + generate one. + + The \QL main window is divided into several, dockable subwindows + arranged around a central \l{The Translation Area} {translation + area}. The \l{Context Window} {context list} is normally shown + on the left, and the \l{Sources and Forms Window} {source code}, + \l{Strings Window} {string list}, and either the \l{Phrases and + Guesses Window} {prhrases and guesses}, or the \l{Warnings Window} + {warnings} are shown above and below the \l{The Translation Area} + {translations area}. + + With a translation file loaded, select a context from the + \l{Context Window} {context list} on the left. Selecting a context + loads the translatable strings found in that context into the + \l{Strings Window} {string list}. Selecting one of the strings + copies that string as the \key{Source text} in the \l{The + Translation Area} {translation area}. Click in the text entry + widget below the copied string and type your translation for that + string. To accept the translation, either press the green + \key{tick mark} button on the toolbar, or click the icon to the + left of the selected source string in the string list. Repeat this + process until all strings in the string list are marked with + \inlineimage linguist-check-on.png + or + \inlineimage linguist-check-warning.png + . Then select the next context and continue. + + Translation options are shown in the \l{Phrases and Guesses + Window} {phrases and guesses window}. If the phrases and guesses + window is not visible, click the \key{Phrases and guesses} tab at + the bottom of the main window. The phrases and guesses window + shows possible translations for the current string. These + translation "guesses" have been read from phrase books + (\menu{Phrases|Open Phrase Book...}). The current string's + current translation is also shown here. To select a guess, double + click it in the prases and guesses window or use the keyboard + shortcut shown to the right of the guess. + + \QL can automatically check whether your translation strings pass + a list of \l{Validation Tests} {validation tests}. Validation test + failures are shown in the \l{Warnings Window} {warnings window}. + If the warnings window is not visible, click the \key{Warnings} + tab at the bottom of the main window. + + Finally, if the source code for the contexts is accessible, the + \l{Sources and Forms Window} {source code window} shows the + context where the current string is used. If the source code + window is not visible, click the \key{Sources and Forms} tab at + the bottom of the main window. + + At the end of the session choose \menu{File|Save} from the menu + bar and then \menu{File|Exit} to quit. + + \section1 The Qt Linguist Window + + \image linguist-linguist.png "Linguist UI Snapshot" + + This \QL main window is divided into dockable subwindows arranged + around a central \l{The Translation Area} {translation area}. The + subwindows are: \l{Context Window} {Context}, \l{Sources and Forms + Window} {Sources and Forms}, \l{Strings Window} {Strings}, + \l{Phrases and Guesses Window} {Phrases and guesses}, and + \l{Warnings Window} {Warnings} (hidden in the UI snapsot). The + translation area is always visible, but the dockable subwindows + can be activated or deactivated in the \menu{View|Views} menu, and + dragged around by their title bars and dropped in the translation + area or even outside the main window. + + \section2 Context Window + + The context window normally appears on the left side of the main + window. It lists the contexts in which strings to be translated + appear. The column labeled \e{Context} lists the context names in + alphabetical order. Each context is the name of a subclass of + QObject. There can also be a context for QObject itself, which + contains strings passed to the static function QObject::tr(). + There can also be an \e{<unnamed context>}, which contains strings + that aren't in a subclass of QObject. + + To the left of the \e{Context} column is a column labeled + \inlineimage linguist-check-obsolete.png + . This column uses the following list of icons to summarize the + current translation state for each context: + + \list + + \o \inlineimage linguist-check-on.png + All strings in the context have been translated, and all the + translations passed the \l{Validation Tests} {validation tests}. + + \o \inlineimage linguist-check-warning.png + All strings in the context have been translated or marked as + translated, but at least one translation failed the \l{Validation + Tests} {validation tests}. + + \o \inlineimage linguist-check-off.png + At least one string in the context has not been translated or is + not marked as translated. + + \o \inlineimage linguist-check-obsolete.png + None of the translated strings still appears in the context. This + usually means the context itself no longer exists in the + application. + + \endlist + + To the right of the \e{Context} column is the \e{Items} column. + Each entry in the \e{Items} column is a pair of numbers separated + by a slash ("/"). The number to the right of the slash is the + number of translatable strings in the context. The number to the + left of the slash is the number of those strings that currently + have translations. i.e., if the numbers are equal, all the + translatable strings in the context have translations. + + In the UI snapshot above, the \bold{MessageEditor} context is + selected. Its \e{Items} entry shows \bold{18/18}, which means it + has 18 translatable strings and all 18 strings currently have + translations. However, the context has been marked with the + \inlineimage linguist-check-warning.png + icon, which means that at least one of the current translations + failed a \l{Validation Tests} {validation test}. In the + \l{Strings Window} {strings window} to the right, we see that one + of the strings is indeed marked with the + \inlineimage linguist-check-warning.png + icon. + + The context window is a dockable window. It can be dragged to + another position in the main window, or dragged out of the main + window to be a separate window. If you move the context window, + \QL remembers the new position and puts the context window there + whenever you start the program. If the context window has been + closed, it can be restored by pressing \key{F6}. + + \section2 Strings Window + + The strings window normally appears on the right in the main + window, above the \l{The Translation Area} {translation area}. Its + \e{Source text} column lists all the translatable strings found in + the current context. Selecting a string makes that string the + current string in the \l{The Translation Area} {translation area}. + + To the left of the \e{Source text} column is a column labeled + \inlineimage linguist-check-obsolete.png + . This column is similar to the one in the \l{Context Window} + {context window}, but here you can click on the icon to change the + translation acceptance state for each string in the list. A tick + mark, green or yellow, means the string has been translated and + the user has accepted the translation. A question mark means + either that the user has not accepted the string's translation or + that the string doesn't have a translation. The table below + explains the acceptance states and their icons: + + \target String Translation States + + \table + \header + \o State + \o Icon + \o Description + + \row + \o Accepted/Correct + \o \inlineimage linguist-check-on.png + \o The source string has a translation (possibly empty); the user + has accepted the translation, and the translation passes all the + \l{Validation Tests} {validation tests}. If the translation is + empty, the user has chosen to leave it empty. Click the icon to + revoke acceptance of the translation and decrement the number of + accepted translations in the \e{Items} column of the \l{Context + Window} {context list} by 1. The state is reset to + \inlineimage linguist-check-off.png + if the string has a translation, or to + \inlineimage linguist-check-empty.png + if the string's translation is empty. If \c{lupdate} changes the + contents of a string, its acceptance state is automatically reset + to \inlineimage linguist-check-off.png + . + + \row + \o Accepted/Warnings + \o \inlineimage linguist-check-warning.png + \o The user has accepted the translation, but the translation does + not pass all the \l{Validation Tests} {validation tests}. The + validation test failures are shown in the \l{Warnings Window} + {warnings window}. Click the icon to revoke acceptance of the + translation. The state is reset to \inlineimage linguist-danger.png + , and the number of accepted translations in the \e{Items} column + of the \l{Context Window} {context list} is decremented by 1. + + \row + \o Not Accepted + \o \inlineimage linguist-check-off.png + \o The string has a non-empty translation that passes all the + \l{Validation Tests} {validation tests}, but the user has not yet + accepted the translation. Click the icon or press \key{Ctrl+Enter} + to accept the translation. The state is reset to + \inlineimage linguist-check-on.png + , and the number of accepted translations in the \e{Items} column + of the \l{Context Window} {context list} is incremented by 1. + + \row + \o No Translation + \o \inlineimage linguist-check-empty.png + \o The string does not have a translation. Click the icon to + accpet the empty translation anyway. The state is reset to + \inlineimage linguist-check-on.png + , and the number of accepted translations in the \e{Items} column + of the \l{Context Window} {context list} is incremented by 1. + + \row + \o Validation Failures + \o \inlineimage linguist-danger.png + \o The string has a translation, but the translation does not + pass all the \l{Validation Tests} {validation tests}. Validation + test failures are shown in the \l{Warnings Window} {warnings} + window. Click on the icon or press \key{Ctrl+Return} to accept + the translation even with validation failures. The state is + reset to \inlineimage linguist-check-warning.png + . We recommended editing the translation to fix the causes of + the validation failures. The state will reset automatically to + \inlineimage linguist-check-off.png + , when all the failures have been fixed. + + \row + \o Obsolete + \o \inlineimage linguist-check-obsolete.png + \o The string is obsolete. It is no longer used in the context. + See the \l{Qt Linguist Manual: Release Manager} {Release Manager} + for instructions on how to remove obsolete messages from the file. + + \endtable + + The string list is a dockable subwindow. If it has been closed, + restored it by pressing \key{F7}. + + \section2 The Translation Area + + The translation area is in the middle of the main window, to the + right of the \l{Context Window} {context list}. It doesn't have a + title bar, so you can't drag it around. Instead, you drag and drop + the other subwindows to arrange them around the translation area. + The string currently selected in the \l{Strings Window} {string + list} appears at the top of the translation area, under the label + \menu{Source text}. Note that all blanks in the source text have + been replaced by "." so the translator can see the spacing + required within the text. + + If the developer provides a \l{QObject::tr()} {disambiguating + comment}, it will appear below the source text area, under the + label \menu{Developer comments}. + + Below the source text and optional developer comments are two text + entry widgets for the translator, one for entering the translation + of the current string, and one for the translator to enter an + optional comment to be read by other translators. + + When \l{Translating Multiple Languages Simultaneously} {multiple + languages} are being translated, this sequence of fields is + repeated for each language. See aso \l {Changing the Target + Locale}. + + \section2 Phrases and Guesses Window + + If the current string in the \l{Strings Window} {string list} + appears in one or more of the \l{Phrase Books} {phrase books} + that have been loaded, the current string and its phrase book + translation(s) will be listed in this window. If the current + string is the same as, or similar to, another string that has + already been translated, that other string and its translation + will also be listed in this window. + + To use a translation from the Phrases and Guesses Window, you can + double click the translation, and it will be copied into the + translation area, or you can use the translation's \e{Guess} + hotkey on the right. You can also press \key{F10} to move the + focus to the Phrases and Guesses Window, then use the up and down + arrow keys to find the desired translation, and and then press + \key{Enter} to copy it to the translation area. If you decide + that you don't want to copy a phrase after all, press \key{Esc} to + return the focus to the translation area. + + The Phrases and Guesses Window is a dockable window. If it has + been closed, it can be made visible by pressing the \e{Phrases and + guesses} tab at the bottom of the window, or by pressing + \key{F10}. + + \section2 Sources and Forms Window + + If the source files containing the translatable strings are + available to \QL, this window shows the source context of the + current string in the \l{Strings Window} {string list}. The source + code line containing the current string should be shown and + highlighted. If the file containing the source string is not + found, the expected absolute file path is shown. + + If the source context shows the wrong source line, it probably + means the translation file is out of sync with the source files. + To re-sync the translation file with the source files, see the + \l{lupdate manual} {lupdate manual}. + + The Sources and Forms window is a dockable window. If it has been + closed, it can be made visible again by pressing the \e{Sources + and Forms} tab at the bottom of the window, or by pressing + \key{F9}. + + \section2 Warnings Window + + If the translation you enter for the current string fails any of + the active \l{Validation Tests} {validation tests}, the failures + are listed in the warnings window. The first of these failure + messages is also shown in the status bar at the bottom of the main + window. Note that only \e{active} validation tests are + reported. To see which validation tests are currently active, or + to activate or deactivate tests, use the \menu{Validation} menu + from the \l{menubar}{menu bar}. + + The Warnings window is a dockable window. If it has been closed, + it can be made visible by pressing the \e{Warnings} tab at the + bottom of the window, or by pressing \key{F8}. + + \target multiple languages + \section2 Translating Multiple Languages Simultaneously + + Qt Linguist can now load and edit multiple translation files + simultaneously. One use for this is the case where you know two + languages better than you know English (Polish and Japanese, say), + and you are given an application's Polish translation file and + asked to update the application's Japanese translation file. You + are more comfortable translating Polish to Japanese than you are + translating English to Japanese. + + Below is the UI snapshot shown earlier, but this time with both + \e{Polish} and \e{Japanese} translation files loaded. + + \image linguist-linguist_2.png + + The first thing to notice is that the \l{The Translation Area} + {translation area} has text editing areas for both Polish and + Japanese, and these are color-coded for easier separation. + Second, the \l{Context Window} and the \l{Strings Window} both + have two clomuns labeled \inlineimage linguist-check-obsolete.png + instead of one, and although it may be hard to tell, these columns + are also color-coded with the same colors. The left-most column in + either case applies to the top-most language area (Polish above) + in the \l{The Translation Area} {translation area}, and the + right-most column applies to the bottom language area. + + The \e{Items} column in the \l{Context Window} combines the values + for both languages. The best way to see this is to look at the + value for the \bold{MessageEditor} context, which is the one + selected in the snapshot shown above. Recall that in the first UI + snapshot (Polish only), the numbers for this context were + \e{18/18}, meaning 18 translatable strings had been found in the + context, and all 18 strings had accepted translations. In the UI + snapshot above, the numbers for the \bold{MessageEditor} context + are now \e{1/18}, meaning that both languages have 18 translatable + strings for that context, but for Japanese, only 1 of the 18 + strings has an accepted translation. The + \inlineimage linguist-check-off.png + icon in the Japanese column means that at least one string in the + context doesn't have an accepted Japanese translation yet. In fact, + 17 of the 18 strings don't have accepted Japanese translations yet. + We will see \e{18/18} in the \e{Items} column when all 18 strings + have accepted translations for all the loaded translation files, + e.g., both Polish and Japanese in the snapshot. + + \section1 Common Tasks + + \section2 Leaving a Translation for Later + + If you wish to leave a translation press \key{Ctrl+L} (Next + Unfinished) to move to the next unfinished translation. To move to + the next translation (whether finished or unfinished) press + \key{Shift+Ctrl+L}. You can also navigate using the Translation + menu. If you want to go to a different context entirely, click the + context you want to work on in the Context list, then click the + source text in the \l{Strings Window} {string list}. + + \section2 Phrases That Require Multiple Translations Depending on Context + + The same phrase may occur in two or more contexts without conflict. Once + a phrase has been translated in one context, \QL notes + that the translation has been made and when the translator reaches a + later occurrence of the same phrase \QL will provide + the previous translation as a possible translation candidate in the + \l{Phrases and Guesses Window}. + + If a phrase occurs more than once in a particular context it will + only be shown once in \QL's \l{Context Window} {context list} and + the translation will be applied to every occurrence within the + context. If the same phrase needs to be translated differently + within the same context the programmer must provide a + distinguishing comment for each of the phrases concerned. If such + comments are used the duplicate phrases will appear in the + \l{Context Window} {context list}. The programmers comments will + appear in the \l{The Translation Area} {translation area} on a + light blue background. + + \section2 Changing Keyboard Accelerators + + A keyboard accelerator is a key combination that, when pressed, + causes an application to perform an action. There are two kinds of + keyboard accelerators: Alt key and Ctrl key accelerators. + + \section3 Alt Key Accellerators + + Alt key accelerators are used in menu selection and on buttons. + The underlined character in a menu item or button label signifies + that pressing the Alt key with the underlined character will + perform the same action as clicking the menu item or pressing the + button. For example, most applications have a \e{File} menu with + the "F" in the word "File" underlined. In these applications the + \e{File} menu can be invoked either by clicking the word "File" on + the menu bar or by pressing \e{Alt+F}. To identify an accelerator + key in the translation text ("File") precede it with an ampersand, + e.g. \e{\&File}. If a string to be translated has an ampersand in + it, then the translation for that string should also have an + ampersand in it, preferably in front of the same character. + + The meaning of an Alt key accelerator can be determined from the + phrase in which the ampersand is embedded. The translator can + change the character part of the Alt key accelerator, if the + translated phrase does not contain the same character or if that + character has already been used in the translation of some other + Alt key accelerator. Conflicts with other Alt key accelerators + must be avoided within a context. Note that some Alt key + accelerators, usually those on the menu bar, may apply in other + contexts. + + \section3 Ctrl Key Accelerators + + Ctrl key accelerators can exist independently of any visual + control. They are often used to invoke actions in menus that would + otherwise require multiple keystrokes or mouse clicks. They may + also be used to perform actions that do not appear in any menu or + on any button. For example, most applications that have a \e{File} + menu have a \e{New} submenu item in the \e{File} menu. The \e{New} + item might appear as "\underline{N}ew Ctrl+N" in the \e{File} + menu, meaning the \e{New} menu can be invoked by simply pressing + \key{Ctrl+N}, instead of either clicking \e{File} with the mouse + and then clicking \e{New} with the mouse, or by entering \e{Alt+F} + and \e{N}. + + Each Ctrl key accelerator is shown in the \l{Strings Window} + {string list} as a separte string, e.g. \key{Ctrl+Enter}. Since + the string doesn't have a context to give it meaning, e.g. like + the context of the phrase in which an Alt key accelerator appears, + the translator must rely on the UI developer to include a + \l{QObject::tr()} {disambiguation comment} to explain the action + the Ctrl key accelerator is meant to perform. This disambiguating + comment (if provided by the developer) will appear under + \e{Developer comments} in the \l{The Translation Area} + {translation area} under the \e{Source text} area. + + Ideally Ctrl key accelerators are translated simply by copying + them directly using \e {Copy from source text} in the + \menu{Translation} menu. However, in some cases the character will + not make sense in the target language, and it must be + changed. Whichever character (alpha or digit) is chosen, the + translation must be in the form "Ctrl+" followed by the upper case + character. \e{Qt} will automatically display the correct name at + runtime. As with Alt key accelerators, if the translator changes + the character, the new character must not conflict with any other + Ctrl key accelerator. + + \warning Do not translate the "Alt", "Ctrl" or "Shift" parts of + the accelerators. \e{Qt} relies on these strings being there. For + supported languages, \e {Qt} automatically translates these + strings. + + \section2 Handling Numbered Arguments + + Some phrases contain numbered arguments. A numbered argument is a + placeholder that will be replaced with text at runtime. A numbered + argument appears in a source string as a percent sign followed by + a digit. Consider an example: \c{After processing file %1, file %2 + is next in line}. In this string to be translated, \c{%1} and + \c{%2} are numbered arguments. At runtime, \c{%1} and \c{%2} will + be replaced with the first and next file names respectively. The + same numbered arguments must appear in the translation, but not + necessarily in the same order. A German translation of the string + might reverse the phrases, e.g. \c{Datei %2 wird bearbeitet, wenn + Datei %1 fertig ist}. Both numbered arguments appear in the + translation, but in the reverse order. \c{%i} will always be + replaced by the same text in the translation stringss, regardless + of where argument \e{i} appears in the argument sequence in the + source string. + + \section2 Reusing Translations + + If the translated text is similar to the source text, choose the + \e {Copy from source text} entry in the \menu Translation menu (press + \key{Ctrl+B}) which will copy the source text into the + \l{The Translation Area} {translation area}. + + \QL automatically lists possible translations from any open + \l{Phrase Books} {phrase books} in the \l{Phrases and Guesses + Window}, as well as similar or identical phrases that have already + been translated. + + \section2 Changing the Target Locale + + \QL displays the target language in the \l{The Translation Area} + {translation area}, and adapts the number of input fields for + plural forms accordingly. If not explicitly set, \QL guesses the + target language and country by evaluating the translation source + file name: E.g. \c app_de.ts sets the target language to German, + and \c app_de_ch.ts sets the target language to German and the + target country to Switzerland (this also helps loading + translations for the current locale automatically; see + \l{linguist-programmers.html}{Programmers Manual} for details). + If your files do not follow this convention, you can also set the + locale information explicitly using \e {Translation File Settings} + in the \menu Edit menu. + + \image linguist-translationfilesettings.png + + \section1 Phrase Books + + A \QL phrase book is a set of source phrases, target + (translated) phrases, and optional definitions. Typically one phrase book + will be created per language and family of applications. Phrase books + are used to provide a common set of translations to help ensure consistency. + They can also be used to avoid duplication of effort since the translations + for a family of applications can be produced once in the phrase book. + If the translator reaches an untranslated phrase that is the same as a + source phrase in a phrase book, \QL will show the + phrase book entry in the \l {Phrases and Guesses Window}. + + \section2 Creating and Editing Phrase Books + + \image linguist-phrasebookdialog.png + + Before a phrase book can be edited it must be created or, if it already + exists, opened. Create a new phrase book by selecting + \menu{Phrase|New Phrase Book} from the menu bar. You must enter a + filename and may change the location of the file if you wish. A newly + created phrase book is automatically opened. Open an existing phrase + book by choosing \menu{Phrase|Open Phrase Book} from the menu bar. + + The phrase book contents can be displayed and changed by selecting + \menu{Phrase|Edit Phrase Book}, and then activating the phrase book you + want to work on. This will pop up the Phrase Book Dialog as shown + in the image above. To add a new phrase click the \gui{New Phrase} + button (or press Alt+N) and type in a new source phrase. Press Tab and + type in the translation. Optionally press Tab and enter a definition -- + this is useful to distinguish different translations of the same source + phrase. This process may be repeated as often as necessary. You can delete + a phrase by selecting it in the phrases list and clicking + Remove Phrase. Click the \gui Close button (press Esc) once you've finished + adding (and removing) phrases. + + \section2 Shortcuts for Editing Phrase Books + + You can also create a new phrase book entry directly out of the translation you + are working on: Clicking \menu{Phrases|Add to Phrase Book} or pressing + \key{Ctrl+T} will add the source text and the content of the first translation + field to the current phrase book. If multiple phrase books are loaded, + you have to specify the phrase book to add the entry to in a dialogue. + If you detect an error in a phrase book entry that is shown in the + \l{Phrases and Guesses Window}, you can also edit it in place by right + clicking on the entry, and selecting \menu{Edit}. After fixing the error + press \key{Return} to leave the editing mode. + + \section2 Batch Translation + + \image linguist-batchtranslation.png + + Use the batch translation feature of \QL to automatically + translate source texts that are also in a phrase book. Selecting + \menu{Tools|Batch Translation} will show you the batch translation dialog, + which let you configure which phrase books to use in what order during the + batch translation process. Furthermore you can set whether only entries + with no present translation should be considered, and whether batch translated + entries should be set to finished (see also \l {String Translation States}). + + \section1 Validation Tests + + \QL provides four kinds of validation tests for translations. + + \list 1 + \o \e {Accelerator validation} detects translated phrases + that do not have an ampersand when the source phrase does and vice + versa. + \o \e {Punctuation validation} detects differences in the + terminating punctuation between source and translated phrases when this + may be significant, e.g. warns if the source phrase ends with an + ellipsis, exclamation mark or question mark, and the translated phrase + doesn't and vice versa. + \o \e {Phrases validation} detects source phrases that are + also in the phrase book but whose translation differs from that given in + the phrase book. + \o \e {Place marker validation} detects whether the same variables + (like \c %1, \c %2) are used both in the source text and in the translation. + \endlist + + Validation may be switched on or off from the menu bar's + Validation item or using the toolbar buttons. Unfinished phrases + that fail validation are marked with an exclamation mark in the + source text pane. Finished phrases will get a yellow tick + instead. If you switch validation off and then switch it on later, + \QL will recheck all phrases and mark any that fail + validation. See also \l{String Translation States}. + + \section1 Form Preview + + \image linguist-previewtool.png + + Forms created by \e{Qt Designer} are stored in special UI files. + \QL can make use of these UI files to show the translations + done so far on the form itself. This of course requires access to the UI + files during the translation process. Activate + \menu{Tools|Open/Refresh Form Preview} to open the window shown above. + The list of UI files \QL has detected are displayed in the Forms + List on the left hand. If the path to the files has changed, you can load + the files manually via \menu{File|Open Form...}. Double-click on an entry + in the Forms List to display the Form File. Select \e{<No Translation>} from + the toolbar to display the untranslated form. + + \section1 Qt Linguist Reference + + + \section2 File Types + + \QL makes use of four kinds of files: + + \list + \o TS \e {translation source files} \BR are human-readable XML + files containing source phrases and their translations. These files are + usually created and updated by \l lupdate and are specific to an + application. + \o \c .xlf \e {XLIFF files} \BR are human-readable XML files that adhere + to the international XML Localization Interchange File Format. \QL + can be used to edit XLIFF files generated by other programs. For standard + Qt projects, however, only the TS file format is used. + \o QM \e {Qt message files} \BR are binary files that contain + translations used by an application at runtime. These files are + generated by \l lrelease, but can also be generated by \QL. + \o \c .qph \e {Qt phrase book files} \BR are human-readable XML + files containing standard phrases and their translations. These files + are created and updated by \QL and may be used by any + number of projects and applications. + \endlist + + \target menubar + \section2 The Menu Bar + + \image linguist-menubar.png + + \list + \o \gui {File} + \list + \o \gui {Open... Ctrl+O} \BR pops up an open file dialog from which a + translation source \c .ts or \c .xlf file can be chosen. + \o \gui {Recently opened files} \BR shows the TS files that + have been opened recently, click one to open it. + \o \gui {Save Ctrl+S} \BR saves the current translation source file. + \o \gui {Save As...} \BR pops up a save as file dialog so that the + current translation source file may be saved with a different + name, format and/or put in a different location. + \o \gui {Release} \BR create a Qt message QM file with the same base + name as the current translation source file. The release manager's + command line tool \l lrelease performs the same function on + \e all of an application's translation source files. + \o \gui {Release As...} \BR pops up a save as file dialog. The + filename entered will be a Qt message QM file of the translation + based on the current translation source file. The release manager's + command line tool \l lrelease performs the same function on + \e all of an application's translation source files. + \o \gui {Print... Ctrl+P} \BR pops up a print dialog. If you click + OK the translation source and the translations will be printed. + \o \gui {Exit Ctrl+Q} \BR closes \QL. + \endlist + + \o \gui {Edit} + \list + \o \gui {Undo Ctrl+Z} \BR undoes the last editing action in the + translation pane. + \o \gui {Redo Ctrl+Y} \BR redoes the last editing action in the + translation pane. + \o \gui {Cut Ctrl+X} \BR deletes any highlighted text in the + translation pane and saves a copy to the clipboard. + \o \gui {Copy Ctrl+C} \BR copies the highlighted text in the + translation pane to the clipboard. + \o \gui {Paste Ctrl+V} \BR pastes the clipboard text into the + translation pane. + \omit + \o \gui {Delete} \BR deletes the highlighted text in the + translation pane. + \endomit + \o \gui {Select All Ctrl+A} \BR selects all the text in the + translation pane ready for copying or deleting. + \o \gui {Find... Ctrl+F} \BR pops up the + Find dialog. When the dialog pops up + enter the text to be found and click the \gui {Find Next} button. + Source phrases, translations and comments may be searched. + \o \gui {Find Next F3} \BR finds the next occurrence of the text that + was last entered in the Find dialog. + \o \gui {Search and Translate...} \BR pops up the Search and + Replace Dialog. Use this dialog to translate the same text in multiple items. + \o \gui {Translation File Settings...} \BR let you configure the target + language and the country/region of a translation source file. + \endlist + + \o \gui {Translation} + \list + \o \gui {Prev Unfinished Ctrl+K} \BR moves to the nearest previous + unfinished source phrase (unfinished means untranslated or + translated but failed validation). + \o \gui {Next Unfinished Ctrl+L} \BR moves to the next unfinished source + phrase. + \o \gui {Prev Shift+Ctrl+K} \BR moves to the previous source phrase. + \o \gui {Next Shift+Ctrl+L} \BR moves to the next source phrase. + \o \gui {Done \& Next Ctrl+Enter} \BR mark this phrase as 'done' + (translated) and move to the next unfinished source phrase. + \o \gui {Copy from source text Ctrl+B} \BR copies the source text into + the translation. + \endlist + + \o \gui {Validation} (See \l{Validation Tests}) + \list + \o \gui {Accelerators} \BR toggles validation on or off for Alt + accelerators. + \o \gui {Ending Punctuation} \BR switches validation on or off + for phrase ending punctuation, e.g. ellipsis, exclamation mark, + question mark, etc. + \o \gui {Phrase Matches} \BR sets validation on or off for + matching against translations that are in the current phrase book. + \o \gui {Place Marker Matches} \BR sets validation on or off for + the use of the same place markers in the source and translation. + \endlist + + \o \gui {Phrases} (See the section \l {Phrase Books} for details.) + \list + + \o \gui {New Phrase Book... Ctrl+N} \BR pops up a save as file + dialog. You must enter a filename to be used for the phrase + book and save the file. Once saved you should open the phrase + book to begin using it. + + \o \gui {Open Phrase Book... Ctrl+H} \BR pops up an open file + dialog. Find and choose a phrase book to open. + + \o \gui {Close Phrase Book} \BR displays the list of phrase + books currently opened. Clicking on one of the items will + close the phrase book. If the phrase book has been modified, a + dialog box asks whether \QL should save the changes. + + \o \gui {Edit Phrase Book...} \BR displays the list of phrase + books currently opened. Clicking on one of the items will open + the \l{Creating and Editing Phrase Books}{Phrase Book Dialog} + where you can add, edit or delete phrases. + + \o \gui {Print Phrase Book...} \BR displays the list of phrase + books currently opened. Clicking on one of the items pops up a + print dialog. If you click OK the phrase book will be + printed. + + \o \gui {Add to Phrase Book Ctrl+T} \BR Adds the source text + and translation currently shown in the \l{The Translation + Area} {translation area} to a phrase book. If multiple phrase + books are loaded, a dialog box let you specify select one. + + \endlist + + \o \gui {Tools} + \list + + \o \gui {Batch Translation...} \BR Opens a \l{Batch + Translation}{dialog} which let you automatically insert + translations for source texts which are in a phrase book. + + \o \gui {Open/Refresh Form Preview F3} \BR Opens the \l{Form + Preview}. This window let you instantly see translations for + forms created with \QD. \endlist + + \o \gui {View} + \list + + \o \gui {Revert Sorting} \BR puts the items in the \l{Context + Window} {context list} and in the \l{Strings Window} {string + list} into their original order. + + \o \gui {Display Guesses} \BR turns the display of phrases and + guesses on or off. + + \o \gui {Statistics} \BR toggles the visibility of the + Statistics dialog. + + \o \gui {Views} \BR toggles the visibility of the \l{Context + Window}, \l{Strings Window}, \l{Phrases and Guesses Window}, + \l{Warnings Window}, or \l{Sources and Forms Window}. + + \o \gui {Toolbars} \BR toggles the visibility of the different + toolbars. + + \endlist + + \o \gui {Help} + \list + \o \gui {Manual F1} \BR opens this manual. + \o \gui {About Qt Linguist} \BR Shows information about \QL. + \o \gui {About Qt} \BR Shows information about \e{Qt}. + \o \gui {What's This? Shift+F1} \BR Click on one item in the main window + to get additional information about it. + \endlist + + \endlist + + \section2 The Toolbar + + \image linguist-toolbar.png + + \list + \o \inlineimage linguist-fileopen.png + \BR + Pops up the open file dialog to open a new translation source TS file. + + \o \inlineimage linguist-filesave.png + \BR + Saves the current translation source TS file. + + \o \inlineimage linguist-fileprint.png + \BR + Prints the current translation source TS file. + + \o \inlineimage linguist-phrasebookopen.png + \BR + Pops up the file open dialog to open a new phrase book \c .qph file. + + \o \inlineimage linguist-editundo.png + \BR + Undoes the last editing action in the translation pane. + + \o \inlineimage linguist-editredo.png + \BR + Redoes the last editing action in the translation pane. + + \o \inlineimage linguist-editcut.png + \BR + Deletes any highlighted text in the translation pane and save a copy to + the clipboard. + + \o \inlineimage linguist-editcopy.png + \BR + Copies the highlighted text in the translation pane to the clipboard. + + \o \inlineimage linguist-editpaste.png + \BR + Pastes the clipboard text into the translation pane. + + \o \inlineimage linguist-editfind.png + \BR + Pops up the Find dialog . + + \o \inlineimage linguist-prev.png + \BR + Moves to the previous source phrase. + + \o \inlineimage linguist-next.png + \BR + Moves to the next source phrase. + + \o \inlineimage linguist-prevunfinished.png + \BR + Moves to the previous unfinished source phrase. + + \o \inlineimage linguist-nextunfinished.png + \BR + Moves to the next unfinished source phrase. + + \o \inlineimage linguist-doneandnext.png + \BR + Marks the phrase as 'done' (translated) and move to the next + unfinished source phrase. + + \o \inlineimage linguist-validateaccelerators.png + \BR + Toggles accelerator validation on and off. + + \o \inlineimage linguist-validatepunctuation.png + \BR + Toggles phrase ending punctuation validation on and off. + + \o \inlineimage linguist-validatephrases.png + \BR + Toggles phrase book validation on or off. + + \o \inlineimage linguist-validateplacemarkers.png + \BR + Toggles place marker validation on or off. + + \endlist + +*/ + +/*! + \page linguist-programmers.html + \title Qt Linguist Manual: Programmers + + \contentspage {Qt Linguist Manual}{Contents} + \previouspage Qt Linguist Manual: Translators + \nextpage Qt Linguist Manual: TS File Format + + Support for multiple languages is extremely simple in Qt + applications, and adds little overhead to the programmer's workload. + + Qt minimizes the performance cost of using translations by + translating the phrases for each window as they are created. In most + applications the main window is created just once. Dialogs are often + created once and then shown and hidden as required. Once the initial + translation has taken place there is no further runtime overhead for + the translated windows. Only those windows that are created, + destroyed and subsequently created will have a translation + performance cost. + + Creating applications that can switch language at runtime is possible + with Qt, but requires a certain amount of programmer intervention and + will of course incur some runtime performance cost. + + \section1 Making the Application Translation-Aware + + Programmers should make their application look for and load the + appropriate translation file and mark user-visible text and Ctrl + keyboard accelerators as targets for translation. + + Each piece of text that requires translating requires context to help + the translator identify where in the program the text occurs. In the + case of multiple identical texts that require different translations, + the translator also requires some information to disambiguate the + source texts. Marking text for translation will automatically cause + the class name to be used as basic context information. In some cases + the programmer may be required to add additional information to help + the translator. + + \section2 Creating Translation Files + + Translation files consist of all the user-visible text and Ctrl key + accelerators in an application and translations of that text. + Translation files are created as follows: + + \list 1 + \o Run \l lupdate initially to generate the first set of TS + translation source files with all the user-visible text but no + translations. + \o The TS files are given to the translator who adds translations + using \QL. \QL takes care of any changed + or deleted source text. + \o Run \l lupdate to incorporate any new text added to the + application. \l lupdate synchronizes the user-visible text from the + application with the translations; it does not destroy any data. + \o Steps 2 and 3 are repeated as often as necessary. + \o When a release of the application is needed \l lrelease is run to + read the TS files and produce the QM files used by the + application at runtime. + \endlist + + For \l lupdate to work successfully, it must know which translation + files to produce. The files are simply listed in the application's \c + .pro Qt project file, for example: + + \snippet examples/linguist/arrowpad/arrowpad.pro 1 + + If your sources contain genuine non-Latin1 strings, \l lupdate needs + to be told about it in the \c .pro file by using, for example, + the following line: + + \code + CODECFORTR = UTF-8 + \endcode + + See the \l lupdate and \l lrelease sections. + + \section2 Loading Translations + + \snippet examples/linguist/hellotr/main.cpp 1 + \snippet examples/linguist/hellotr/main.cpp 3 + + This is how a simple \c main() function of a Qt application begins. + + \snippet examples/linguist/hellotr/main.cpp 1 + \snippet examples/linguist/hellotr/main.cpp 4 + + For a translation-aware application a translator object is created, a + translation is loaded and the translator object installed into the + application. + + \snippet examples/linguist/arrowpad/main.cpp 0 + \snippet examples/linguist/arrowpad/main.cpp 1 + + For non-Latin1 strings in the sources you will also need for example: + + \code + QTextCodec::setCodecForTr(QTextCodec::codecForName("utf8")); + \endcode + + In production applications a more flexible approach, for example, + loading translations according to locale, might be more appropriate. If + the TS files are all named according to a convention such as + \e appname_locale, e.g. \c tt2_fr, \c tt2_de etc, then the + code above will load the current locale's translation at runtime. + + If there is no translation file for the current locale the application + will fall back to using the original source text. + + Note that if you need to programmatically add translations at + runtime, you can reimplement QTranslator::translate(). + + \section2 Making the Application Translate User-Visible Strings + + User-visible strings are marked as translation targets by wrapping them + in a \c tr() call, for example: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 6 + + would become + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 7 + + All QObject subclasses that use the \c Q_OBJECT macro implement + the \c tr() function. + + Although the \c tr() call is normally made directly since it is + usually called as a member function of a QObject subclass, in + other cases an explicit class name can be supplied, for example: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 8 + + or + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 9 + + \section2 Distinguishing Identical Strings That Require Different Translations + + The \l lupdate program automatically provides a \e context for every + source text. This context is the class name of the class that contains + the \c tr() call. This is sufficient in the vast majority of cases. + Sometimes however, the translator will need further information to + uniquely identify a source text; for example, a dialog that contained + two separate frames, each of which contained an "Enabled" option would + need each identified because in some languages the translation would + differ between the two. This is easily achieved using the + two argument form of the \c tr() call, e.g. + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 10 + + and + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 11 + + Ctrl key accelerators are also translatable: + + \snippet examples/linguist/trollprint/mainwindow.cpp 2 + + It is strongly recommended that the two argument form of \c tr() is used + for Ctrl key accelerators. The second argument is the only clue the + translator has as to the function performed by the accelerator. + + \section2 Helping the Translator with Navigation Information + + In large complex applications it may be difficult for the translator to + see where a particular source text comes from. This problem can be + solved by adding a comment using the keyword \e TRANSLATOR which + describes the navigation steps to reach the text in question; e.g. + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 12 + + These comments are particularly useful for widget classes. + + \section2 Handling Plural Forms + + Qt includes a \c tr() overload that will make it very easy to + write "plural-aware" internationalized applications. This overload + has the following signature: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 17 + + Depending on the value of \c n, the \c tr() function will return a different + translation, with the correct grammatical number for the target language. + Also, any occurrence of \c %n is replaced with \c{n}'s value. For example: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 18 + + If a French translation is loaded, this will expand to "0 item + remplac\unicode{233}", "1 item remplac\unicode{233}", "2 items + remplac\unicode{233}s", etc., depending on \c{n}'s value. + And if no translation is loaded, the orignal string is used, with \c %n + replaced with count's value (e.g., "6 item(s) replaced"). + + To handle plural forms in the native language, you need to load a + translation file for this language, too. \l lupdate has the + \c -pluralonly command line option, which allows the creation of + TS files containing only entries with plural forms. + + See the \l{http://qt.nokia.com/doc/qq/}{Qt Quarterly} Article + \l{http://qt.nokia.com/doc/qq/qq19-plurals.html}{Plural Forms in Translations} + for further details on this issue. + + \section2 Coping With C++ Namespaces + + C++ namespaces and the \c {using namespace} statement can confuse + \l lupdate. It will interpret \c MyClass::tr() as meaning just + that, not as \c MyNamespace::MyClass::tr(), even if \c MyClass is + defined in the \c MyNamespace namespace. Runtime translation of + these strings will fail because of that. + + You can work around this limitation by putting a \e TRANSLATOR + comment at the beginning of the source files that use \c + MyClass::tr(): + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 13 + + After the comment, all references to \c MyClass::tr() will be + understood as meaning \c MyNamespace::MyClass::tr(). + + \section2 Translating Text That is Outside of a QObject Subclass + + \section3 Using QCoreApplication::translate() + + If the quoted text is not in a member function of a QObject subclass, + use either the tr() function of an appropriate class, or the + QCoreApplication::translate() function directly: + + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 14 + + \section3 Using QT_TR_NOOP() and QT_TRANSLATE_NOOP() + + If you need to have translatable text completely outside a function, + there are two macros to help: QT_TR_NOOP() and QT_TRANSLATE_NOOP(). + These macros merely mark the text for extraction by \l{lupdate}. + The macros expand to just the text (without the context). + + Example of QT_TR_NOOP(): + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 15 + + Example of QT_TRANSLATE_NOOP(): + \snippet doc/src/snippets/code/doc_src_linguist-manual.qdoc 16 + + \section1 Tutorials + + Three tutorials are presented: + + \list 1 + \o \l{linguist/hellotr}{Hello tr()} demonstrates the creation of + a \l QTranslator object. It also shows the simplest use of + the \c tr() function to mark user-visible source text for + translation. + + \o \l{linguist/arrowpad}{Arrow Pad} explains how to make the application load the + translation file applicable to the current locale. It also shows the + use of the two-argument form of \c tr() which provides additional + information to the translator. + + \o \l{linguist/trollprint}{Troll Print} explains how + identical source texts can be distinguished even when they occur in + the same context. This tutorial also discusses how the translation + tools help minimize the translator's work when an application is + upgraded. + \endlist + + These tutorials cover all that you need to know to prepare your Qt + applications for translation. + + At the beginning of a project add the translation source files to be + used to the project file and add calls to \l lupdate and \l lrelease to + the makefile. + + During the project all the programmer must do is wrap any user-visible + text in \c tr() calls. They should also use the two argument form for + Ctrl key accelerators, or when asked by the translator for the cases + where the same text translates into two different forms in the same + context. The programmer should also include \c TRANSLATION comments to + help the translator navigate the application. +*/ + +/*! + \page linguist-ts-file-format.html + \title Qt Linguist Manual: TS File Format + + \contentspage {Qt Linguist Manual}{Contents} + \previouspage Qt Linguist Manual: Programmers + + The TS file format used by \QL is described by the + \l{http://www.w3.org/TR/1998/REC-xml-19980210}{DTD} presented below, + which we include for your convenience. Be aware that the format + may change in future Qt releases. + + \quotefile tools/linguist/shared/ts.dtd + +*/ |