diff options
Diffstat (limited to 'doc/src/porting/porting4-overview.qdoc')
| -rw-r--r-- | doc/src/porting/porting4-overview.qdoc | 373 |
1 files changed, 373 insertions, 0 deletions
diff --git a/doc/src/porting/porting4-overview.qdoc b/doc/src/porting/porting4-overview.qdoc new file mode 100644 index 0000000..5eff1ba --- /dev/null +++ b/doc/src/porting/porting4-overview.qdoc @@ -0,0 +1,373 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at http://qt.nokia.com/contact. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \page porting4-overview.html + \title Moving from Qt 3 to Qt 4 + \ingroup porting + \brief Porting advice for authors of new and existing Qt 3 applications. + + This document describes which parts of Qt should be used when + writing an application with Qt 3, so that it can be upgraded to + use Qt 4 later with a minimum of effort. However, the advice may + also be useful to developers who are porting existing applications + from Qt 3 to Qt 4. + + For a detailed overview + of the porting process for existing Qt 3 applications, see the + \l{Porting to Qt 4} document. + + \tableofcontents + + Since Qt 4 provides important new functionality at the cost of + some compatibility with Qt 3, it is useful for developers of + Qt 3-based applications to learn how to take advantage of + Qt 3's API now while preparing for future changes that will be + needed when upgrading to Qt 4. + + Certain advanced Qt 3 features were moved to the Qt 3 support + library (\l{Qt3Support}) in Qt 4.0, and have been gradually + replaced in subsequent releases of Qt 4. + + Making Qt 3 applications as portable to Qt 4 as possible + enables a smooth transition between versions of Qt in the + long term, and allows for a stable development process + throughout. + + \section1 Qt 3 Features to Avoid + + Although we are proud of the level of stability we have achieved + with Qt, it is important to realise that, for Qt 4 to be a + substantial improvement over Qt 3, certain features have + been revised to make the framework more maintainable for us + and more usable for developers. It is therefore useful to + know which features of Qt 3 should be avoided to help save + time during a later porting effort to Qt 4. Note that it is + still possible to use many of the following classes and + features through the use of the \l{Qt3Support} module. + + \section2 Painting Outside Paint Events + + In Qt 3, under certain circumstances, it was possible to use + QPainter to draw on a given custom widget outside its + \l{QWidget::}{paintEvent()} reimplementation. In Qt 4, in most + situations, painting must occur within a widget's paint event + handler. + + On X11, it is possible to set the \l{Qt::WA_PaintOutsidePaintEvent} + attribute on widgets to keep existing code, but we recommend + restricting the use of painting code to within paint event handlers + where possible. + + More information about this change can be found in the + \l{Porting to Qt 4#Painting and Redrawing Widgets}{Painting and Redrawing Widgets} + section of the \l{Porting to Qt 4} document. + + \section2 Qt Designer + + The version of Qt Designer supplied with Qt 3 provided + extensive code editing and project management features + (control over \c{.ui.h} and \c{.pro} files), and encouraged + users to design main window applications from within the + Qt Designer environment. + + The version of Qt Designer supplied with Qt 4 is intended + to be integrated with other software development tools (such + as integrated development environments), and does not + support these project-level features. + + We recommend using one of the + \l{Using a Designer UI File in Your Application}{form subclassing approaches} + with forms created using Qt Designer. This avoids the need + to use \c{.ui.h} files and special purpose code editors. + + Existing Qt 3 forms created using Qt Designer can be gradually + ported to Qt 4 by following the advice in the + \l{Porting UI Files to Qt 4} guide. However, some extra effort + will be required to move application logic from \c{.ui.h} files + into the main body of a Qt 4 application. + + \section2 Menu Items (QMenuItem) + + The old-style construction of menus by creating individual + menu items has been superseded in Qt 4 by the use of + generic actions which can be used in menus, toolbars, and + as keyboard shortcuts. + + Qt 3 also supports this action-based approach, so, by using + QAction throughout your application, less work will be + required to adapt your application to Qt 4. + + \section2 Pointer-Based Classes (QPtr*) + + Qt 3 provides a group of pointer-based classes (\c QPtrList, + \c QPtrDict, \c QPtrVector, etc.) that help manage collections + of pointers to objects (usually QObject subclasses) in an + application. In addition, the value-based collection classes + (\c QValueList, \c QValueDict, \c QValueVector, etc.) provide + a way to store standard value types which cannot be easily stored + in pointer-based collections. + + Qt 4 introduces a single set of collection classes which + does not require developers to pay as much attention to + memory allocation and object ownership issues. As a result, + Qt 3's pointer-based classes have no direct equivalent + classes in Qt 4. + + To ease migration, use Qt 3's value-based classes to store + most objects, including pointers; for example, use + \c QValueVector<QWidget *> rather than + \c QPtrVector<QWidget *>. These can be replaced by + Qt 4's QVector, QLinkedList, and QList later. + + \section2 Other Collection Classes (QStrList, Q*Dict) + + Some collection classes in Qt 3 have been deprecated in + favor of easier to use, higher level alternatives. These + include the dictionary classes (\c QAsciiDict, \c QDict, + \c QIntDict, \c QPtrDict) and \c QStrList. + + \c QStrList can usually replaced by the higher level QStringList + class in Qt 3; this is also available in Qt 4. It is + recommended that you use the QMap class instead of the \c QDict + classes. In Qt 4, QMap is also complemented by the QHash + class. + + \section2 Memory Arrays (QMemArray) + + In Qt 3, the \c QMemArray class is used as a simple array + container for simple data types. This class is deprecated in + Qt 4 in favor of the QVector and QVarLengthVector classes + which provide more powerful and consistent array objects. + + Qt 3's closest equivalent class to Qt 4's QVector is the + \c QValueVector class. For many purposes, this can be used + instead of \c QMemArray. + + \section2 URL Operations (QUrlOperator) + + The URL operator in Qt 3 provides an abstract way to + handle files via HTTP, FTP, and on the local file system. + However, Qt 4 only provides this functionality through the + use of the Q3UrlOperator. + + From Qt 4.4, the Network Access API provides a subset of the features + provided by \c QUrlOperator that are mostly intended for use with + applications that use the HTTP and FTP protocols. See the + QNetworkRequest, QNetworkReply, and QNetworkAccessManager documentation + for further details. + + It is also possible to perform operations on remote files through + the QNetworkAccessManager and QFtp classes, and on local files + with the QFile class. + + \section2 SQL Cursors (QSqlCursor) + + In Qt 3, one of the preferred methods of working with SQL + is to use a cursor to manipulate the contents of a database. + In Qt 4, the preferred method of working with SQL is to use + the model/view architecture (QSqlQueryModel and QSqlTableModel) + and, as a result, the cursor interface is only supplied in the + Q3SqlCursor class. + + The easiest way to ensure continuity between Qt 3 and Qt 4 + is to use QSqlQuery rather than \c QSqlCursor, + and migrate to QSqlQueryModel later. + + \section2 Domain Name Service (QDns) + + The QDns class in Qt 4 provides a much simpler interface + than the QDns class in Qt 3, and is mainly used for host + name resolution. + As a result, many of the more complex features of Qt 3's + QDns class are only available through Qt 4's Q3Dns + compatibility class. + + To resolve host names with Qt 3, it is recommended that you + use the higher level interface of QSocket rather than QDns. + The equivalent functionality is available in Qt 4 in the + QAbstractSocket and QHostInfo classes. + + \section2 Wizard Dialogs (QWizard) + + Qt 3 provides support for "wizard" dialogs in the form of + the \c QWizard class. Prior to Qt 4.3, this class was made + available as Q3Wizard, and provides the same interface for + creating relatively complex wizards. + + In Qt 4.3 and later, a revised QWizard class can be used to + create this kind of dialog, but existing Qt 3 wizard + implementations may need to be redesigned to work with the + new QWizard API. + + \section2 Abstract Grid Views (QGridView) + + Before the introduction of the Qt 3 \c QTable class, + \c QGridView was the recommended way to create tables of + custom items. + With the introduction of \c QTable, the \c QGridView class was + effectively obsoleted, and the \c QTable class should now be + used to display tabular information in your Qt 3 application. + This approach allows you to use QTableWidget as a replacement + when later porting your application to Qt 4. + + \section2 Specialized Scrolling Views + + In Qt 3, the \c QScrollView class provides a viewport that can + be used to display part of a larger widget, and will + optionally provide scroll bars for navigation purposes. + In Qt 4, this functionality is superseded by classes such as + QScrollArea, which provides a more intuitive interface for + developers to use. + \c QScrollView is available in Qt 4 as the Q3ScrollView class. + + In Qt 3, it is recommended that \c QScrollView should be + used with child widgets rather than subclassed. However, it + should be noted that this approach may not be appropriate if + you need to use extremely large scrolling areas in your + application, since Qt 3 widgets cannot be wider or taller + than 32767 pixels. + + \section1 Significantly Changed Features + + Some Qt 3 features have changed significantly for Qt 4. + and the recommended way of using them has therefore changed + significantly, too. This is most notably true for the drag + and drop API. + + Additionally, some of the more specialized features in Qt 3 are + often used to help customize widgets and add extra polish to an + application. + Although these improvements make applications more presentable to + users, many of them are unnecessary with Qt 4, and may create + additional porting work. + + \section2 Drag and Drop + + Qt 4 introduces a simpler and more intuitive implementation + of drag and drop between widgets, and with other applications. + As a result, there is no simple approach that can be used to + make drag and drop in a Qt 3 application easier to port to + Qt 4. + + \section2 Extensive Customization of Item Views + + Each of the classes that are used to display list, tree, + and table items in Qt 3 can be subclassed for the purposes + of customizing their appearance. The item view framework + in Qt 4 is implemented according to a different paradigm + (model/view) which does not allow items to be customized + using this method. + + Although Qt 4 provides compatibility classes (Q3ListBoxItem, + Q3ListViewItem, and Q3TableItem) that can be used in the same + way as their Qt 3 counterparts, these cannot be used within + the standard model/view framework. It is recommended that, + to minimize porting effort, extensive customization of item + classes should be avoided in Qt 3, if at all possible. + + \section2 Double Buffering + + Qt 3 applications often use double buffering for reducing + flicker when painting custom widgets. This approach is + unnecessary with Qt 4 because double buffering is + automatically performed by the paint engine. + + It still makes sense to use double buffering in + Qt 4 in certain contexts. For example, in + Chapter 5 of \l{GUI Programming with Qt 3}, double buffering + was presented as a speed optimization and not just as a means + of reducing flicker. + + \section2 Data-Aware Forms + + The \c QDataTable, \c QDataBrowser, and \c QDataView classes + in Qt 3 allow integration between widgets and SQL-based + databases. + + In Qt 4.1 and earlier, the preferred way to create a data-aware + widget is to connect an generic item view (such as a table view) + to a SQL model. In Qt 4.2 and later, the QDataWidgetMapper class + can be used to map data to widgets in a form-based user interface. + + New applications written with Qt 3 should use QSqlQuery in + preference to an approach based on the old-style data-aware + widgets. + This offers a choice of porting strategies when later migrating + the application to Qt 4: You can either continue to use + QSqlQuery or take the opportunity to use the model/view + classes to handle database integration. + + \section2 Dock Windows and Areas + + In Qt 4, the way that dock windows are constructed and used + in main window applications differs significantly to the + pattern of use provided by Qt 3. As a result, the introduction + of a simpler and cleaner API means that Qt 3 applications that + make extensive use of dock window areas will require careful + examination when they are ported to Qt 4. + + We recommend that the QMainWindow class be used in preference + to the Q3MainWindow compatibility class when an existing Qt 3 + main window application is ported to Qt 4. Therefore, we + recommend that specialized use of dock window areas should + be avoided when writing a Qt 3 application with Qt 4 in mind. + + \section2 Custom Styles + + The style system used to provide consistent themes for Qt's + standard widgets has been revised for Qt 4. As a result, + custom styles for Qt 3 require some porting work to be done + before they can be used with Qt 4. To ease the porting process, + we recommend that you avoid implementing custom widget styles + for Qt 3 applications unless it is absolutely necessary for + your users. + + In Qt 4.2 and later, \l{Qt Style Sheets} can be used to + implement many common modifications to existing styles, and + this may be sufficient for Qt 3 applications. + + \section2 Events + In Qt 3, QCloseEvents were not accepted by default. In Qt 4, + the event handler QWidget::closeEvent() receives QCloseEvents, + and accepts them by default closing the application. To avoid + this, please reimplement QWidget::closeEvent(). +*/ |