summaryrefslogtreecommitdiffstats
path: root/doc/src/qaxserver.qdoc
diff options
context:
space:
mode:
Diffstat (limited to 'doc/src/qaxserver.qdoc')
-rw-r--r--doc/src/qaxserver.qdoc898
1 files changed, 898 insertions, 0 deletions
diff --git a/doc/src/qaxserver.qdoc b/doc/src/qaxserver.qdoc
new file mode 100644
index 0000000..f0c317b
--- /dev/null
+++ b/doc/src/qaxserver.qdoc
@@ -0,0 +1,898 @@
+/****************************************************************************
+**
+** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).
+** Contact: Qt Software Information (qt-info@nokia.com)
+**
+** This file is part of the documentation of the Qt Toolkit.
+**
+** $QT_BEGIN_LICENSE:LGPL$
+** No Commercial Usage
+** This file contains pre-release code and may not be distributed.
+** You may use this file in accordance with the terms and conditions
+** contained in the either Technology Preview License Agreement or the
+** Beta Release License Agreement.
+**
+** GNU Lesser General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU Lesser
+** General Public License version 2.1 as published by the Free Software
+** Foundation and appearing in the file LICENSE.LGPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU Lesser General Public License version 2.1 requirements
+** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.
+**
+** In addition, as a special exception, Nokia gives you certain
+** additional rights. These rights are described in the Nokia Qt LGPL
+** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this
+** package.
+**
+** GNU General Public License Usage
+** Alternatively, this file may be used under the terms of the GNU
+** General Public License version 3.0 as published by the Free Software
+** Foundation and appearing in the file LICENSE.GPL included in the
+** packaging of this file. Please review the following information to
+** ensure the GNU General Public License version 3.0 requirements will be
+** met: http://www.gnu.org/copyleft/gpl.html.
+**
+** If you are unsure which license is appropriate for your use, please
+** contact the sales department at qt-sales@nokia.com.
+** $QT_END_LICENSE$
+**
+****************************************************************************/
+
+/*!
+ \module QAxServer
+ \title QAxServer Module
+ \contentspage Qt's Modules
+ \previouspage QAxContainer
+ \nextpage QtDBus module
+ \ingroup modules
+
+ \brief The QAxServer module is a Windows-only static library that
+ you can use to turn a standard Qt binary into a COM server.
+
+ The QAxServer module is part of the \l ActiveQt framework. It
+ consists of three classes:
+
+ \list
+ \o QAxFactory defines a factory for the creation of COM objects.
+ \o QAxBindable provides an interface between the Qt widget and the
+ COM object.
+ \o QAxAggregated can be subclassed to implement additional COM interfaces.
+ \endlist
+
+ Some \l{Qt Examples#ActiveQt}{example implementations} of ActiveX
+ controls and COM objects are provided.
+
+ \sa {ActiveQt Framework}
+
+ Topics:
+
+ \tableofcontents
+
+ \section1 Using the Library
+
+ To turn a standard Qt application into a COM server using the
+ QAxServer library you must add \c qaxserver as a CONFIG setting
+ in your \c .pro file.
+
+ An out-of-process executable server is generated from a \c .pro
+ file like this:
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 0
+
+ To build an in-process server, use a \c .pro file like this:
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 1
+
+ The files \c qaxserver.rc and \c qaxserver.def are part of the
+ framework and can be used from their usual location (specify a
+ path in the \c .pro file), or copied into the project directory.
+ You can modify these files as long as it includes any file as the
+ type library entry, ie. you can add version information or specify
+ a different toolbox icon.
+
+ The \c qaxserver configuration will cause the \c qmake tool to add the
+ required build steps to the build system:
+
+ \list
+ \o Link the binary against \c qaxserver.lib instead of \c qtmain.lib
+ \o Call the \l idc tool to generate an IDL file for the COM server
+ \o Compile the IDL into a type library using the MIDL tool (part of the
+ compiler installation)
+ \o Attach the resulting type library as a binary resource to the server
+ binary (again using the \l idc tool)
+ \o Register the server
+ \endlist
+
+ Note that the QAxServer build system is not supported on Windows 98/ME
+ (attaching of resources to a binary is not possible there), but a server
+ built on Windows NT/2000/XP will work on previous Windows versions as well.
+
+ To skip the post-processing step, also set the \c qaxserver_no_postlink
+ configuration.
+
+ Additionally you can specify a version number using the \c VERSION
+ variable, e.g.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 2
+
+ The version number specified will be used as the version of the type
+ library and of the server when registering.
+
+ \section2 Out-of-Process vs. In-Process
+
+ Whether your COM server should run as a stand-alone executable
+ or as a shared library in the client process depends mainly on the
+ type of COM objects you want to provide in the server.
+
+ An executable server has the advantage of being able to run as a
+ stand-alone application, but adds considerable overhead to the
+ communication between the COM client and the COM object. If the
+ control has a programming error only the server process running
+ the control will crash, and the client application will probably
+ continue to run. Not all COM clients support executable servers.
+
+ An in-process server is usually smaller and has faster startup
+ time. The communication between client and server is done directly
+ through virtual function calls and does not introduce the overhead
+ required for remote procedure calls. However, if the server crashes the
+ client application is likely to crash as well, and not every
+ functionality is available for in-process servers (i.e. register in
+ the COM's running-object-table).
+
+ Both server types can use Qt either as a shared library, or statically
+ linked into the server binary.
+
+ \section2 Typical Errors During the Post-Build Steps
+
+ For the ActiveQt specific post-processing steps to work the
+ server has to meet some requirements:
+
+ \list
+ \o All controls exposed can be created with nothing but a QApplication
+ instance being present
+ \o The initial linking of the server includes a temporary type
+ library resource
+ \o All dependencies required to run the server are in the system path
+ (or in the path used by the calling environment; note that Visual
+ Studio has its own set of environment variables listed in the
+ Tools|Options|Directories dialog).
+ \endlist
+
+ If those requirements are not met one ore more of the following
+ errors are likely to occur:
+
+ \section3 The Server Executable Crashes
+
+ To generate the IDL the widgets exposed as ActiveX controls need to
+ be instantiated (the constructor is called). At this point, nothing
+ else but a QApplication object exists. Your widget constructor must
+ not rely on any other objects to be created, e.g. it should check for
+ null-pointers.
+
+ To debug your server run it with -dumpidl outputfile and check where
+ it crashes.
+
+ Note that no functions of the control are called.
+
+ \section3 The Server Executable Is Not a Valid Win32 Application
+
+ Attaching the type library corrupted the server binary. This is a
+ bug in Windows and happens only with release builds.
+
+ The first linking step has to link a dummy type library into the
+ executable that can later be replaced by idc. Add a resource file
+ with a type library to your project as demonstrated in the examples.
+
+ \section3 "Unable to locate DLL"
+
+ The build system needs to run the server executable to generate
+ the interface definition, and to register the server. If a dynamic
+ link library the server links against is not in the path this
+ might fail (e.g. Visual Studio calls the server using the
+ enivronment settings specified in the "Directories" option). Make
+ sure that all DLLs required by your server are located in a
+ directory that is listed in the path as printed in the error
+ message box.
+
+ \section3 "Cannot open file ..."
+
+ The ActiveX server could not shut down properly when the last
+ client stopped using it. It usually takes about two seconds for
+ the application to terminate, but you might have to use the task
+ manager to kill the process (e.g. when a client doesn't release
+ the controls properly).
+
+ \section1 Implementing Controls
+
+ To implement a COM object with Qt, create a subclass of QObject
+ or any existing QObject subclass. If the class is a subclass of QWidget,
+ the COM object will be an ActiveX control.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 3
+
+ The Q_OBJECT macro is required to provide the meta object information
+ about the widget to the ActiveQt framework.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 4
+
+ Use the Q_CLASSINFO() macro to specify the COM identifiers for the COM
+ object. \c ClassID and \c InterfaceID are required, while \c EventsID is
+ only necessary when your object has signals. To generate these identifiers,
+ use system tools like \c uuidgen or \c guidgen.
+
+ You can specify additional attributes for each of your classes; see
+ \l{Class Information and Tuning} for details.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 5
+
+ Use the Q_PROPERTY() macro to declare properties for the ActiveX control.
+
+ Declare a standard constructor taking a parent object, and functions,
+ signals and slots like for any QObject subclass.
+ \footnote
+ If a standard constructor is not present the compiler will issue
+ an error "no overloaded function takes 2 parameters" when using
+ the default factory through the QAXFACTORY_DEFAULT() macro. If you
+ cannot provide a standard constructor you must implement a
+ QAxFactory custom factory and call the constructor you have in
+ your implementation of QAxFactory::create.
+ \endfootnote
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 6
+
+ The ActiveQt framework will expose properties and public slots as ActiveX
+ properties and methods, and signals as ActiveX events, and convert between
+ the Qt data types and the equivalent COM data types.
+
+ \section2 Data Types
+
+ The Qt data types that are supported for properties are:
+
+ \table
+ \header
+ \o Qt data type
+ \o COM property
+ \row
+ \o bool
+ \o VARIANT_BOOL
+ \row
+ \o QString
+ \o BSTR
+ \row
+ \o int
+ \o int
+ \row
+ \o uint
+ \o unsigned int
+ \row
+ \o double
+ \o double
+ \row
+ \o \l qlonglong
+ \o CY
+ \row
+ \o \l qulonglong
+ \o CY
+ \row
+ \o QColor
+ \o OLE_COLOR
+ \row
+ \o QDate
+ \o DATE
+ \row
+ \o QDateTime
+ \o DATE
+ \row
+ \o QTime
+ \o DATE
+ \row
+ \o QFont
+ \o IFontDisp*
+ \row
+ \o QPixmap
+ \o IPictureDisp*
+ \footnote
+ COM cannot marshal IPictureDisp accross process boundaries,
+ so QPixmap properties cannot be called for out-of-process servers. You
+ can however marshal the image data via e.g. temporary files. See the
+ Microsoft
+ \link http://support.microsoft.com/default.aspx?scid=kb;[LN];Q150034 KB article
+ Q150034 \endlink for more information.
+ \endfootnote
+ \row
+ \o QVariant
+ \o VARIANT
+ \row
+ \o QVariantList (same as QList\<QVariant\>)
+ \o SAFEARRAY(VARIANT)
+ \row
+ \o QStringList
+ \o SAFEARRAY(BSTR)
+ \row
+ \o QByteArray
+ \o SAFEARRAY(BYTE)
+ \row
+ \o QRect
+ \o User defined type
+ \row
+ \o QSize
+ \o User defined type
+ \row
+ \o QPoint
+ \o User defined type
+ \endtable
+
+ The Qt data types that are supported for parameters in signals and
+ slots are:
+ \table
+ \header
+ \o Qt data type
+ \o COM parameter
+ \row
+ \o bool
+ \o [in] VARIANT_BOOL
+ \row
+ \o bool&
+ \o [in, out] VARIANT_BOOL*
+ \row
+ \o QString, const QString&
+ \o [in] BSTR
+ \row
+ \o QString&
+ \o [in, out] BSTR*
+ \row
+ \o QString&
+ \o [in, out] BSTR*
+ \row
+ \o int
+ \o [in] int
+ \row
+ \o int&
+ \o [in,out] int
+ \row
+ \o uint
+ \o [in] unsigned int
+ \row
+ \o uint&
+ \o [in, out] unsigned int*
+ \row
+ \o double
+ \o [in] double
+ \row
+ \o double&
+ \o [in, out] double*
+ \row
+ \o QColor, const QColor&
+ \o [in] OLE_COLOR
+ \row
+ \o QColor&
+ \o [in, out] OLE_COLOR*
+ \row
+ \o QDate, const QDate&
+ \o [in] DATE
+ \row
+ \o QDate&
+ \o [in, out] DATE*
+ \row
+ \o QDateTime, const QDateTime&
+ \o [in] DATE
+ \row
+ \o QDateTime&
+ \o [in, out] DATE*
+ \row
+ \o QFont, const QFont&
+ \o [in] IFontDisp*
+ \row
+ \o QFont&
+ \o [in, out] IFontDisp**
+ \row
+ \o QPixmap, const QPixmap&
+ \o [in] IPictureDisp*
+ \row
+ \o QPixmap&
+ \o [in, out] IPictureDisp**
+ \row
+ \o QList\<QVariant\>, const QList\<QVariant\>&
+ \o [in] SAFEARRAY(VARIANT)
+ \row
+ \o QList\<QVariant\>&
+ \o [in, out] SAFEARRAY(VARIANT)*
+ \row
+ \o QStringList, const QStringList&
+ \o [in] SAFEARRAY(BSTR)
+ \row
+ \o QStringList&
+ \o [in, out] SAFEARRAY(BSTR)*
+ \row
+ \o QByteArray, const QByteArray&
+ \o [in] SAFEARRAY(BYTE)
+ \row
+ \o QByteArray&
+ \o [in, out] SAFEARRAY(BYTE)*
+ \row
+ \o QObject*
+ \o [in] IDispatch*
+ \row
+ \o QRect&
+ \footnote
+ OLE needs to marshal user defined types by reference (ByRef), and cannot
+ marshal them by value (ByVal). This is why const-references and object
+ parameters are not supported for QRect, QSize and QPoint. Also note that
+ servers with this datatype require Windows 98 or DCOM 1.2 to be installed.
+ \endfootnote
+ \o [in, out] struct QRect (user defined)
+ \row
+ \o QSize&
+ \o [in, out] struct QSize (user defined)
+ \row
+ \o QPoint&
+ \o [in, out] struct QPoint (user defined)
+ \endtable
+
+ Also supported are exported enums and flags (see Q_ENUMS() and
+ Q_FLAGS()). The in-parameter types are also supported as
+ return values.
+
+ Properties and signals/slots that have parameters using any other
+ data types are ignored by the ActiveQt framework.
+
+ \section2 Sub-Objects
+
+ COM objects can have multiple sub-objects that can represent a sub element
+ of the COM object. A COM object representing a multi-document spread sheet
+ application can for example provide one sub-object for each spread sheet.
+
+ Any QObject subclass can be used as the type for a sub object in ActiveX, as
+ long as it is known to the QAxFactory. Then the type can be used in properties,
+ or as the return type or paramter of a slot.
+
+ \section2 Property Notification
+
+ To make the properties bindable for the ActiveX client, use multiple
+ inheritance from the QAxBindable class:
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 7
+
+ When implementing the property write functions, use the
+ QAxBindable class's requestPropertyChange() and propertyChanged()
+ functions to allow ActiveX clients to bind to the control
+ properties.
+ \footnote
+ This is not required, but gives the client more control over
+ the ActiveX control.
+ \endfootnote
+
+ \section1 Serving Controls
+
+ To make a COM server available to the COM system it must be registered
+ in the system registry using five unique identifiers.
+ These identifiers are provided by tools like \c guidgen or \c uuidgen.
+ The registration information allows COM to localize the binary providing
+ a requested ActiveX control, marshall remote procedure calls to the
+ control and read type information about the methods and properties exposed
+ by the control.
+
+ To create the COM object when the client asks for it the server must export
+ an implementation of a QAxFactory. The easist way to do this is to use a set
+ of macros:
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 8
+
+ This will export \c MyWidget and \c MyWidget2 as COM objects that can be
+ created by COM clients, and will register \c MySubType as a type that can
+ be used in properties and parameters of \c MyWidget and \c MyWidget2.
+
+ The \link QAxFactory QAxFactory class documentation \endlink explains
+ how to use this macro, and how to implement and use custom factories.
+
+ For out-of-process executable servers you can implement a main()
+ function to instantiate a QApplication object and enter the event
+ loop just like any normal Qt application. By default the
+ application will start as a standard Qt application, but if you
+ pass \c -activex on the command line it will start as an ActiveX
+ server. Use QAxFactory::isServer() to create and run a standard
+ application interface, or to prevent a stand-alone execution:
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 9
+
+ This is however not necessary as ActiveQt provides a default implementation
+ of a main function. The default implemenation calls QAxFactory::startServer(),
+ creates a QApplication instance and calls exec().
+
+ To build the ActiveX server executable run \c qmake
+ to generate the makefile, and use your compiler's
+ make tool as for any other Qt application. The make process will
+ also register the controls in the system registry by calling the
+ resulting executable with the \c -regserver command line option.
+
+ If the ActiveX server is an executable, the following command line
+ options are supported:
+ \table
+ \header \o Option \o Result
+ \row \o \c -regserver \o Registers the server in the system registry
+ \row \o \c -unregserver \o Unregisters the server from the system registry
+ \row \o \c -activex \o Starts the application as an ActiveX server
+ \row \o \c{-dumpidl <file> -version x.y} \o Writes the server's IDL to the
+ specified file. The type library will have version x.y
+ \endtable
+
+ In-process servers can be registered using the \c regsvr32 tool available
+ on all Windows systems.
+
+ \section2 Typical Compile-Time Problems
+
+ The compiler/linker errors listed are based on those issued by the
+ Microsoft Visual C++ 6.0 compiler.
+
+ \section3 "No overloaded function takes 2 parameters"
+
+ When the error occurs in code that uses the QAXFACTORY_DEFAULT()
+ macro, the widget class had no constructor that can be used by the
+ default factory. Either add a standard widget constructor or
+ implement a custom factory that doesn't require one.
+
+ When the error occurs in code that uses the QAXFACTORY_EXPORT()
+ macro, the QAxFactory subclass had no appropriate constructor.
+ Provide a public class constructor like
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 10
+
+ for your factory class.
+
+ \section3 "Syntax error: bad suffix on number"
+
+ The unique identifiers have not been passed as strings into the
+ QAXFACTORY_EXPORT() or QAXFACTORY_DEFAULT() macro.
+
+ \section3 "Unresolved external symbol _ucm_instantiate"
+
+ The server does not export an implementation of a QAxFactory. Use
+ the QAXFACTORY_EXPORT() macro in one of the project's
+ implementation files to instantiate and export a factory, or use
+ the QAXFACTORY_DEFAULT() macro to use the default factory.
+
+ \section3 "_ucm_initialize already defined in ..."
+
+ The server exports more than one implementation of a QAxFactory,
+ or exports the same implementation twice. If you use the default
+ factory, the QAXFACTORY_DEFAULT() macro must only be used once in
+ the project. Use a custom QAxFactory implementation and the
+ QAXFACTORY_EXPORT() macro if the server provides multiple ActiveX
+ controls.
+
+ \section2 Distributing QAxServer Binaries
+
+ ActiveX servers written with Qt can use Qt either as a shared
+ library, or have Qt linked statically into the binary. Both ways
+ will produce rather large packages (either the server binary
+ itself becomes large, or you have to ship the Qt DLL).
+
+ \section3 Installing Stand-Alone Servers
+
+ When your ActiveX server can also run as a stand-alone application,
+ run the server executable with the \c -regserver command line
+ parameter after installing the executable on the target system.
+ After that the controls provided by the server will be available to
+ ActiveX clients.
+
+ \section3 Installing In-Process Servers
+
+ When your ActiveX server is part of an installation package, use the
+ \c regsvr32 tool provided by Microsoft to register the controls on
+ the target system. If this tool is not present, load the DLL into
+ your installer process, resolve the \c DllRegisterServer symbol and
+ call the function:
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 11
+
+ \section3 Distributing Servers over the Internet
+
+ If you want to use controls in your server in web-pages you need to
+ make the server available to the browser used to view your page, and
+ you need to specify the location of the server package in your page.
+
+ To specify the location of a server, use the CODEBASE attribute in
+ the OBJECT tag of your web-site. The value can point to the server
+ file itself, to an INF file listing other files the server requires
+ (e.g. the Qt DLL), or a compressed CAB archive.
+
+ INF and CAB files are documented in almost every book available about
+ ActiveX and COM programming as well as in the MSDN library and various
+ other Online resources. The examples include INF files that can be used
+ to build CAB archives:
+
+ \snippet examples/activeqt/simple/simple.inf 0
+
+ The CABARC tool from Microsoft can easily generate CAB archives:
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 12
+
+ The INF files assume a static build of Qt, so no dependencies to other DLLs
+ are listed in the INF files. To distribute an ActiveX server depending on
+ DLLs you must add the dependencies, and provide the library files
+ with the archive.
+
+ \section1 Using the Controls
+
+ To use the ActiveX controls, e.g. to embed them in a web page, use
+ the \c <object> HTML tag.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 13
+
+ To initialize the control's properties, use
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 14
+
+ If the web browser supports scripting use JavaScript, VBScript
+ and forms to script the control. The
+ \l{Qt Examples#ActiveQt}{ActiveQt examples} include demonstration
+ HTML pages for the example controls.
+
+ \section2 Supported and Unsupported ActiveX Clients
+
+ The following is largly based on our own experiements with ActiveX
+ controls and client applications, and is by no means complete.
+
+ \section3 Supported Clients
+
+ These standard applications work with ActiveX controls developed with
+ ActiveQt. Note that some clients support only in-process controls.
+
+ \list
+ \o Internet Explorer
+ \o Microsoft ActiveX Control Test Container
+ \o Microsoft Visual Studio 6.0
+ \o Microsoft Visual Studio.NET/2003
+ \o Microsoft Visual Basic 6.0
+ \o MFC- and ATL-based containers
+ \o Sybase PowerBuilder
+ \o ActiveQt based containers
+ \endlist
+
+ Microsoft Office applications are supported, but you need to register
+ the controls as "Insertable" objects. Reimplement QAxFactory::registerClass
+ to add this attribute to the COM class, or set the "Insertable" class info
+ for your class to "yes" using the Q_CLASSINFO macro.
+
+ \section3 Unsupported Clients
+
+ We have not managed to make ActiveQt based COM objects work with the
+ following client applications.
+
+ \list
+ \o Borland C++ Builder (Versions 5 and 6)
+ \o Borland Delphi
+ \endlist
+
+ \section2 Typical Runtime Errors
+
+ \section3 The Server Does Not Respond
+
+ If the system is unable to start the server (check with the task
+ manager whether the server runs a process), make sure that no DLL
+ the server depends on is missing from the system path (e.g. the Qt
+ DLL!). Use a dependency walker to view all dependencies of the server
+ binary.
+
+ If the server runs (e.g. the task manager lists a process), see
+ the following section for information on debugging your server.
+
+ \section3 The Object Cannot Be Created
+
+ If the server could be built and registered correctly during the build
+ process, but the object cannot be initiliazed e.g. by the OLE/COM Object
+ Viewer application, make sure that no DLL the server depends on is
+ missing from the system path (e.g. the Qt DLL). Use a dependency walker
+ to view all dependencies of the server binary.
+
+ If the server runs, see the following section for information on
+ debugging your server.
+
+ \section2 Debugging Runtime Errors
+
+ To debug an in-process server in Visual Studio, set the server project
+ as the active project, and specify a client "executable for debug
+ session" in the project settings (e.g. use the ActiveX Test Container).
+ You can set breakpoints in your code, and also step into ActiveQt and
+ Qt code if you installed the debug version.
+
+ To debug an executable server, run the application in a debugger
+ and start with the command line parameter \c -activex. Then start
+ your client and create an instance of your ActiveX control. COM
+ will use the existing process for the next client trying to create
+ an ActiveX control.
+
+ \section1 Class Information and Tuning
+
+ To provide attributes for each COM class, use the Q_CLASSINFO macro, which is part of
+ Qt's meta object system.
+
+ \table
+ \header
+ \o Key
+ \o Meaning of value
+ \row
+ \o Version
+ \o The version of the class (1.0 is default)
+ \row
+ \o Description
+ \o A string describing the class.
+ \row
+ \o ClassID
+ \o The class ID.
+ You must reimplement QAxFactory::classID if not specified.
+ \row
+ \o InterfaceID
+ \o The interface ID.
+ You must reimplement QAxFactory::interfaceID if not specified.
+ \row
+ \o EventsID
+ \o The event interface ID.
+ No signals are exposed as COM events if not specified.
+ \row
+ \o DefaultProperty
+ \o The property specified represents the default property of this class.
+ Ie. the default property of a push button would be "text".
+ \row
+ \o DefaultSignal
+ \o The signal specified respresents the default signal of this class.
+ Ie. the default signal of a push button would be "clicked".
+ \row
+ \o LicenseKey
+ \o Object creation requires the specified license key. The key can be
+ empty to require a licensed machine. By default classes are not
+ licensed. Also see the following section.
+ \row
+ \o StockEvents
+ \o Objects expose stock events if value is "yes".
+ See \l QAxFactory::hasStockEvents()
+ \row
+ \o ToSuperClass
+ \o Objects expose functionality of all super-classes up to and
+ including the class name in value.
+ See \l QAxFactory::exposeToSuperClass()
+ \row
+ \o Insertable
+ \o If the value is "yes" the class is registered to be "Insertable"
+ and will be listed in OLE 2 containers (ie. Microsoft Office). This
+ attribute is not be set by default.
+ \row
+ \o Aggregatable
+ \o If the value is "no" the class does not support aggregation. By
+ default aggregation is supported.
+ \row
+ \o Creatable
+ \o If the value is "no" the class cannot be created by the client,
+ and is only available through the API of another class (ie. the
+ class is a sub-type).
+ \row
+ \o RegisterObject
+ \o If the value is "yes" objects of this class are registered with
+ OLE and accessible from the running object table (ie. clients
+ can connect to an already running instance of this class). This
+ attribute is only supported in out-of-process servers.
+ \row
+ \o MIME
+ \o The object can handle data and files of the format specified in the
+ value. The value has the format mime:extension:description. Multiple
+ formats are separated by a semicolon.
+ \row
+ \o CoClassAlias
+ \o The classname used in the generated IDL and in the registry. This is
+ esp. useful for C++ classes that live in a namespace - by default,
+ ActiveQt just removes the "::" to make the IDL compile.
+ \endtable
+
+ Note that both keys and values are case sensitive.
+
+ The following declares version 2.0 of a class that exposes only its
+ own API, and is available in the "Insert Objects" dialog of Microsoft
+ Office applications.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 15
+
+ \section2 Developing Licensed Components
+
+ If you develop components you might want to control who is able to instantiate
+ those components. Since the server binary can be shipped to and registered on
+ any client machine it is possible for anybody to use those components in his
+ own software.
+
+ Licensing components can be done using a variety of techniques, e.g. the code
+ creating the control can provide a license key, or the machine on which the
+ control is supposed to run needs to be licensed.
+
+ To mark a Qt class as licensed specify a "LicenseKey" using the
+ Q_CLASSINFO() macro.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 16
+
+ The key is required to be able to create an instance of \c MyLicensedControl
+ on a machine that is not licensed itself. The licensed developer can now
+ redistributes the server binary with his application, which creates the control
+ using the value of "LicenseKey", while users of the application cannot create
+ the control without the license key.
+
+ If a single license key for the control is not sufficient (ie. you want
+ differnet developers to receive different license keys) you can specify an
+ empty key to indicate that the control requires a license, and reimplement
+ \l QAxFactory::validateLicenseKey() to verify that a license exists on the
+ system (ie. through a license file).
+
+ \section2 More Interfaces
+
+ ActiveX controls provided by ActiveQt servers support a minimal set of COM
+ interfaces to implement the OLE specifications. When the ActiveX class inherits
+ from the QAxBindable class it can also implement additional COM interfaces.
+
+ Create a new subclass of QAxAggregated and use multiple inheritance
+ to subclass additional COM interface classes.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 17
+
+ Reimplement the QAxAggregated::queryInterface() function to
+ support the additional COM interfaces.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 18
+
+ Since \c ISomeCOMInterface is a subclass of \c IUnknown you will
+ have to implement the \c QueryInterface(), \c AddRef(), and \c
+ Release() functions. Use the QAXAGG_IUNKNOWN macro in your
+ class definition to do that. If you implement the \c IUnknown
+ functions manually, delegate the calls to the interface pointer
+ returned by the QAxAggregated::controllingUnknown() function,
+ e.g.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 19
+
+ Do not support the \c IUnknown interface itself in your
+ \l{QAxAggregated::queryInterface()}{queryInterface()}
+ implementation.
+
+ Implement the methods of the COM interfaces, and use QAxAggregated::object()
+ if you need to make calls to the QObject subclass implementing the control.
+
+ In your QAxBindable subclass, implement
+ QAxBindable::createAggregate() to return a new object of the
+ QAxAggregated subclass.
+
+ \snippet doc/src/snippets/code/doc_src_qaxserver.qdoc 20
+
+ \section1 License Information
+
+ The QAxContainer module is not covered by the \l{GNU General Public License (GPL)},
+ the \l{GNU Lesser General Public License (LGPL)}, or the
+ \l{Qt Commercial Editions}{Qt Commercial License}. Instead, it is distributed under
+ the following license.
+
+ \legalese
+ Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).\br
+ All rights reserved.
+
+ Contact: Qt Software Information (qt-info@nokia.com)\br
+
+ You may use this file under the terms of the BSD license as follows:\br
+
+ "Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.\br
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.\br
+ * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor the names of
+ its contributors may be used to endorse or promote products derived from this
+ software without specific prior written permission.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY
+ EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT
+ SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN
+ ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
+ \endlegalese
+*/