diff options
Diffstat (limited to 'doc/src/qsizepolicy.qdoc')
| -rw-r--r-- | doc/src/qsizepolicy.qdoc | 522 |
1 files changed, 0 insertions, 522 deletions
diff --git a/doc/src/qsizepolicy.qdoc b/doc/src/qsizepolicy.qdoc deleted file mode 100644 index 9f52d83..0000000 --- a/doc/src/qsizepolicy.qdoc +++ /dev/null @@ -1,522 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the documentation of the Qt Toolkit. -** -** $QT_BEGIN_LICENSE:LGPL$ -** No Commercial Usage -** This file contains pre-release code and may not be distributed. -** You may use this file in accordance with the terms and conditions -** contained in the Technology Preview License Agreement accompanying -** this package. -** -** GNU Lesser General Public License Usage -** Alternatively, this file may be used under the terms of the GNU Lesser -** General Public License version 2.1 as published by the Free Software -** Foundation and appearing in the file LICENSE.LGPL included in the -** packaging of this file. Please review the following information to -** ensure the GNU Lesser General Public License version 2.1 requirements -** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** If you have questions regarding the use of this file, please contact -** Nokia at qt-info@nokia.com. -** -** -** -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -/*! - \class QSizePolicy - \brief The QSizePolicy class is a layout attribute describing horizontal - and vertical resizing policy. - - \ingroup appearance - \ingroup geomanagement - - The size policy of a widget is an expression of its willingness to - be resized in various ways, and affects how the widget is treated - by the \l{Layout Management}{layout engine}. Each widget returns a - QSizePolicy that describes the horizontal and vertical resizing - policy it prefers when being laid out. You can change this for - a specific widget by changing its QWidget::sizePolicy property. - - QSizePolicy contains two independent QSizePolicy::Policy values - and two stretch factors; one describes the widgets's horizontal - size policy, and the other describes its vertical size policy. It - also contains a flag to indicate whether the height and width of - its preferred size are related. - - The horizontal and vertical policies can be set in the - constructor, and altered using the setHorizontalPolicy() and - setVerticalPolicy() functions. The stretch factors can be set - using the setHorizontalStretch() and setVerticalStretch() - functions. The flag indicating whether the widget's - \l{QWidget::sizeHint()}{sizeHint()} is width-dependent (such as a - menu bar or a word-wrapping label) can be set using the - setHeightForWidth() function. - - The current size policies and stretch factors be retrieved using - the horizontalPolicy(), verticalPolicy(), horizontalStretch() and - verticalStretch() functions. Alternatively, use the transpose() - function to swap the horizontal and vertical policies and - stretches. The hasHeightForWidth() function returns the current - status of the flag indicating the size hint dependencies. - - Use the expandingDirections() function to determine whether the - associated widget can make use of more space than its - \l{QWidget::sizeHint()}{sizeHint()} function indicates, as well as - find out in which directions it can expand. - - Finally, the QSizePolicy class provides operators comparing this - size policy to a given policy, as well as a QVariant operator - storing this QSizePolicy as a QVariant object. - - \sa QSize, QWidget::sizeHint(), QWidget::sizePolicy, - QLayoutItem::sizeHint() -*/ - -/*! - \enum QSizePolicy::PolicyFlag - - These flags are combined together to form the various \l{Policy} - values: - - \value GrowFlag The widget can grow beyond its size hint if necessary. - \value ExpandFlag The widget should get as much space as possible. - \value ShrinkFlag The widget can shrink below its size hint if necessary. - \value IgnoreFlag The widget's size hint is ignored. The widget will get - as much space as possible. - - \sa Policy -*/ - -/*! - \enum QSizePolicy::Policy - - This enum describes the various per-dimension sizing types used - when constructing a QSizePolicy. - - \value Fixed The QWidget::sizeHint() is the only acceptable - alternative, so the widget can never grow or shrink (e.g. the - vertical direction of a push button). - - \value Minimum The sizeHint() is minimal, and sufficient. The - widget can be expanded, but there is no advantage to it being - larger (e.g. the horizontal direction of a push button). - It cannot be smaller than the size provided by sizeHint(). - - \value Maximum The sizeHint() is a maximum. The widget can be - shrunk any amount without detriment if other widgets need the - space (e.g. a separator line). - It cannot be larger than the size provided by sizeHint(). - - \value Preferred The sizeHint() is best, but the widget can be - shrunk and still be useful. The widget can be expanded, but there - is no advantage to it being larger than sizeHint() (the default - QWidget policy). - - \value Expanding The sizeHint() is a sensible size, but the - widget can be shrunk and still be useful. The widget can make use - of extra space, so it should get as much space as possible (e.g. - the horizontal direction of a horizontal slider). - - \value MinimumExpanding The sizeHint() is minimal, and sufficient. - The widget can make use of extra space, so it should get as much - space as possible (e.g. the horizontal direction of a horizontal - slider). - - \value Ignored The sizeHint() is ignored. The widget will get as - much space as possible. - - \sa PolicyFlag, setHorizontalPolicy(), setVerticalPolicy() -*/ - -/*! - \fn QSizePolicy::QSizePolicy() - - Constructs a QSizePolicy object with \l Fixed as its horizontal - and vertical policies. - - The policies can be altered using the setHorizontalPolicy() and - setVerticalPolicy() functions. Use the setHeightForWidth() - function if the preferred height of the widget is dependent on the - width of the widget (for example, a QLabel with line wrapping). - - \sa setHorizontalStretch(), setVerticalStretch() -*/ - -/*! - \fn QSizePolicy::QSizePolicy(Policy horizontal, Policy vertical) - - Constructs a QSizePolicy object with the given \a horizontal and - \a vertical policies, and DefaultType as the control type. - - Use setHeightForWidth() if the preferred height of the widget is - dependent on the width of the widget (for example, a QLabel with - line wrapping). - - \sa setHorizontalStretch(), setVerticalStretch() -*/ - -/*! - \fn QSizePolicy::QSizePolicy(Policy horizontal, Policy vertical, ControlType type) - \since 4.3 - - Constructs a QSizePolicy object with the given \a horizontal and - \a vertical policies, and the specified control \a type. - - Use setHeightForWidth() if the preferred height of the widget is - dependent on the width of the widget (for example, a QLabel with - line wrapping). - - \sa setHorizontalStretch(), setVerticalStretch(), controlType() -*/ - -/*! - \fn QSizePolicy::Policy QSizePolicy::horizontalPolicy() const - - Returns the horizontal component of the size policy. - - \sa setHorizontalPolicy(), verticalPolicy(), horizontalStretch() -*/ - -/*! - \fn QSizePolicy::Policy QSizePolicy::verticalPolicy() const - - Returns the vertical component of the size policy. - - \sa setVerticalPolicy(), horizontalPolicy(), verticalStretch() -*/ - -/*! - \fn void QSizePolicy::setHorizontalPolicy(Policy policy) - - Sets the horizontal component to the given \a policy. - - \sa horizontalPolicy(), setVerticalPolicy(), setHorizontalStretch() -*/ - -/*! - \fn void QSizePolicy::setVerticalPolicy(Policy policy) - - Sets the vertical component to the given \a policy. - - \sa verticalPolicy(), setHorizontalPolicy(), setVerticalStretch() -*/ - -/*! - \fn Qt::Orientations QSizePolicy::expandingDirections() const - - Returns whether a widget can make use of more space than the - QWidget::sizeHint() function indicates. - - A value of Qt::Horizontal or Qt::Vertical means that the widget - can grow horizontally or vertically (i.e., the horizontal or - vertical policy is \l Expanding or \l MinimumExpanding), whereas - Qt::Horizontal | Qt::Vertical means that it can grow in both - dimensions. - - \sa horizontalPolicy(), verticalPolicy() -*/ - -/*! - \fn ControlType QSizePolicy::controlType() const - \since 4.3 - - Returns the control type associated with the widget for which - this size policy applies. -*/ - -/*! - \fn void QSizePolicy::setControlType(ControlType type) - \since 4.3 - - Sets the control type associated with the widget for which this - size policy applies to \a type. - - The control type specifies the type of the widget for which this - size policy applies. It is used by some styles, notably - QMacStyle, to insert proper spacing between widgets. For example, - the Mac OS X Aqua guidelines specify that push buttons should be - separated by 12 pixels, whereas vertically stacked radio buttons - only require 6 pixels. - - \sa QStyle::layoutSpacing() -*/ - -/*! - \fn void QSizePolicy::setHeightForWidth(bool dependent) - - Sets the flag determining whether the widget's preferred height - depends on its width, to \a dependent. - - \sa hasHeightForWidth() -*/ - -/*! - \fn bool QSizePolicy::hasHeightForWidth() const - - Returns true if the widget's preferred height depends on its - width; otherwise returns false. - - \sa setHeightForWidth() -*/ - -/*! - \fn bool QSizePolicy::operator==(const QSizePolicy &other) const - - Returns true if this policy is equal to \a other; otherwise - returns false. - - \sa operator!=() -*/ - -/*! - \fn bool QSizePolicy::operator!=(const QSizePolicy &other) const - - Returns true if this policy is different from \a other; otherwise - returns false. - - \sa operator==() -*/ - -/*! - \fn int QSizePolicy::horizontalStretch() const - - Returns the horizontal stretch factor of the size policy. - - \sa setHorizontalStretch(), verticalStretch(), horizontalPolicy() -*/ - -/*! - \fn int QSizePolicy::verticalStretch() const - - Returns the vertical stretch factor of the size policy. - - \sa setVerticalStretch(), horizontalStretch(), verticalPolicy() -*/ - -/*! - \fn void QSizePolicy::setHorizontalStretch(uchar stretchFactor) - - Sets the horizontal stretch factor of the size policy to the given \a - stretchFactor. - - \sa horizontalStretch(), setVerticalStretch(), setHorizontalPolicy() -*/ - -/*! - \fn void QSizePolicy::setVerticalStretch(uchar stretchFactor) - - Sets the vertical stretch factor of the size policy to the given - \a stretchFactor. - - \sa verticalStretch(), setHorizontalStretch(), setVerticalPolicy() -*/ - -/*! - \fn void QSizePolicy::transpose() - - Swaps the horizontal and vertical policies and stretches. -*/ - -/*! - \enum QSizePolicy::ControlType - \since 4.3 - - This enum specifies the different types of widgets in terms of - layout interaction: - - \value DefaultType The default type, when none is specified. - \value ButtonBox A QDialogButtonBox instance. - \value CheckBox A QCheckBox instance. - \value ComboBox A QComboBox instance. - \value Frame A QFrame instance. - \value GroupBox A QGroupBox instance. - \value Label A QLabel instance. - \value Line A QFrame instance with QFrame::HLine or QFrame::VLine. - \value LineEdit A QLineEdit instance. - \value PushButton A QPushButton instance. - \value RadioButton A QRadioButton instance. - \value Slider A QAbstractSlider instance. - \value SpinBox A QAbstractSpinBox instance. - \value TabWidget A QTabWidget instance. - \value ToolButton A QToolButton instance. - - \sa setControlType(), controlType() -*/ - -#ifdef QT3_SUPPORT -/*! - \typedef QSizePolicy::SizeType - \compat - - Use the QSizePolicy::Policy enum instead. -*/ - -/*! - \enum QSizePolicy::ExpandData - \compat - - Use the Qt::Orientations enum instead. - - \value NoDirection Use 0 instead. - \value Horizontally Use Qt::Horizontal instead. - \value Vertically Use Qt::Vertical instead. - \value BothDirections Use Qt::Horizontal | Qt::Vertical instead. -*/ - -/*! - \fn bool QSizePolicy::mayShrinkHorizontally() const - - Use the horizontalPolicy() function combined with the - QSizePolicy::PolicyFlag enum instead. - - \oldcode - bool policy = mayShrinkHorizontally(); - \newcode - bool policy = horizontalPolicy() & QSizePolicy::ShrinkFlag; - \endcode -*/ - -/*! - \fn bool QSizePolicy::mayShrinkVertically() const - - Use the verticalPolicy() function combined with the - QSizePolicy::PolicyFlag enum instead. - - \oldcode - bool policy = mayShrinkVertically(); - \newcode - bool policy = verticalPolicy() & QSizePolicy::ShrinkFlag; - \endcode -*/ - -/*! - \fn bool QSizePolicy::mayGrowHorizontally() const - - Use the horizontalPolicy() function combined with the - QSizePolicy::PolicyFlag enum instead. - - \oldcode - bool policy = mayGrowHorizontally(); - \newcode - bool policy = horizontalPolicy() & QSizePolicy::GrowFlag; - \endcode -*/ - -/*! - \fn bool QSizePolicy::mayGrowVertically() const - - Use the verticalPolicy() function combined with the - QSizePolicy::PolicyFlag enum instead. - - \oldcode - bool policy = mayGrowVertically(); - \newcode - bool policy = verticalPolicy() & QSizePolicy::GrowFlag; - \endcode -*/ - -/*! - \fn Qt::QSizePolicy::Orientations QSizePolicy::expanding() const - - Use expandingDirections() instead. -*/ - -/*! - \fn QSizePolicy::QSizePolicy(Policy horizontal, Policy vertical, bool dependent) - - Use the QSizePolicy() constructor and the setHeightForWidth() - function instead. - - \oldcode - QSizePolicy *policy = new QSizePolicy(horizontal, vertical, dependent); - \newcode - QSizePolicy *policy = new QSizePolicy(horizontal, vertical); - policy->setHeightForWidth(dependent); - \endcode -*/ - -/*! - \fn QSizePolicy::QSizePolicy(Policy horizontal, Policy vertical, uchar horizontalStretch, - uchar verticalStretch, bool dependent) - - Use the QSizePolicy() constructor and call the - setHorizontalStretch(), setVerticalStretch(), and - setHeightForWidth() functions instead. - - \oldcode - QSizePolicy *policy = new QSizePolicy(horizontal, vertical, - horizontalStretch, verticalStretch, - dependent); - \newcode - QSizePolicy *policy = new QSizePolicy(horizontal, vertical); - policy->setHorizontalStretch(horizontalStretch); - policy->setVerticalStretch(verticalStretch); - policy->setHeightForWidth(dependent); - \endcode -*/ - -/*! - \fn QSizePolicy::Policy QSizePolicy::horData() const - - Use horizontalPolicy() instead. -*/ - -/*! - \fn QSizePolicy::Policy QSizePolicy::verData() const - - Use verticalPolicy() instead. -*/ - -/*! - \fn void QSizePolicy::setHorData(Policy policy) - - Use setHorizontalPolicy() instead. -*/ - -/*! - \fn void QSizePolicy::setVerData(Policy policy) - - Use setVerticalPolicy() instead. -*/ - -/*! - \fn uint QSizePolicy::horStretch() const - - Use horizontalStretch() instead. -*/ - -/*! - \fn uint QSizePolicy::verStretch() const - - Use verticalStretch() instead. -*/ - -/*! - \fn void QSizePolicy::setHorStretch(uchar stretch) - - Use setHorizontalStretch() instead. -*/ - -/*! - \fn void QSizePolicy::setVerStretch(uchar stretch) - - Use setVerticalStretch() instead. -*/ -#endif |