diff options
Diffstat (limited to 'doc/src/qtxmlpatterns.qdoc')
| -rw-r--r-- | doc/src/qtxmlpatterns.qdoc | 893 |
1 files changed, 893 insertions, 0 deletions
diff --git a/doc/src/qtxmlpatterns.qdoc b/doc/src/qtxmlpatterns.qdoc new file mode 100644 index 0000000..cb260fc --- /dev/null +++ b/doc/src/qtxmlpatterns.qdoc @@ -0,0 +1,893 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \module QtXmlPatterns + \title QtXmlPatterns Module + \since 4.4 + \contentspage Qt's Modules + \previouspage QtXml + \nextpage Phonon Module + \ingroup modules + \ingroup scripting + + \keyword Patternist + + \brief An overview of Qt's support for using XQuery and XPath in + Qt programs. + + \tableofcontents + + \section1 Introduction + + XQuery is a language for traversing XML documents to select and + aggregate items of interest and to transform them for output as + XML or some other format. XPath is the \e{element selection} part + of XQuery. + + The QtXmlPatterns module supports using + \l{http://www.w3.org/TR/xquery} {XQuery 1.0} and + \l{http://www.w3.org/TR/xpath20} {XPath 2.0} in Qt applications, + for querying XML data \e{and} for querying + \l{QAbstractXmlNodeModel} {non-XML data that can be modeled to + look like XML}. The QtXmlPatterns module is included in the \l{Qt + Full Framework Edition}, and the \l{Open Source Versions of Qt}. + Readers who are not familiar with the XQuery/XPath language can read + \l {A Short Path to XQuery} for a brief introduction. + + \section1 Advantages of using QtXmlPatterns and XQuery + + The XQuery/XPath language simplifies data searching and + transformation tasks by eliminating the need for doing a lot of + C++ or Java procedural programming for each new query task. Here + is an XQuery that constructs a bibliography of the contents of a + library: + + \target qtxmlpatterns_example_query + \quotefile snippets/patternist/introductionExample.xq + + First, the query opens a \c{<bibliography>} element in the + output. The + \l{xquery-introduction.html#using-path-expressions-to-match-select-items} + {embedded path expression} then loads the XML document describing + the contents of the library (\c{library.xml}) and begins the + search. For each \c{<book>} element it finds, where the publisher + was Addison-Wesley and the publication year was after 1991, it + creates a new \c{<book>} element in the output as a child of the + open \c{<bibliography>} element. Each new \c{<book>} element gets + the book's title as its contents and the book's publication year + as an attribute. Finally, the \c{<bibliography>} element is + closed. + + The advantages of using QtXmlPatterns and XQuery in your Qt + programs are summarized as follows: + + \list + + \o \bold{Ease of development}: All the C++ programming required to + perform data query tasks can be replaced by a simple XQuery + like the example above. + + \o \bold{Comprehensive functionality}: The + \l{http://www.w3.org/TR/xquery/#id-expressions} {expression + syntax} and rich set of + \l{http://www.w3.org/TR/xpath-functions} {functions and + operators} provided by XQuery are sufficient for performing any + data searching, selecting, and sorting tasks. + + \o \bold{Conformance to standards}: Conformance to all applicable + XML and XQuery standards ensures that QtXmlPatterns can always + process XML documents generated by other conformant + applications, and that XML documents created with QtXmlPatterns + can be processed by other conformant applications. + + \o \bold{Maximal flexibility} The QtXmlPatterns module can be used + to query XML data \e{and} non-XML data that can be + \l{QAbstractXmlNodeModel} {modeled to look like XML}. + + \endlist + + \section1 Using the QtXmlPatterns module + + There are two ways QtXmlPatterns can be used to evaluate queries. + You can run the query engine in your Qt application using the + QtXmlPatterns C++ API, or you can run the query engine from the + command line using Qt's \c{xmlpatterns} command line utility. + + \section2 Running the query engine from your Qt application + + To access the QtXmlPatterns C++ API from your Qt application, + include the QtXmlPatterns classes at compile time: + + \snippet doc/src/snippets/code/doc_src_qtxmlpatterns.qdoc 0 + + Link the compiled application with the QtXmlPatterns module by + adding the following line to the + \l{qmake-project-files.html#declaring-qt-libraries} {QT line} in + your qmake \c{.pro} file: + + \snippet doc/src/snippets/code/doc_src_qtxmlpatterns.qdoc 1 + + If we save the example XQuery shown above in a text file (e.g. + \c{myquery.xq}), we can run it from a Qt application using a + standard QtXmlPatterns code sequence: + + \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 3 + + First construct a QFile for the text file containing the XQuery + (\c{myquery.xq}). Then create an instance of QXmlQuery and call + its \l{QXmlQuery::}{setQuery()} function to load and parse the + XQuery file. Then create an \l{QXmlSerializer} {XML serializer} to + output the query's result set as unformatted XML. Finally, call + the \l{QXmlQuery::}{evaluateTo()} function to evaluate the query + and serialize the results as XML. + + \note If you compile Qt yourself, the QtXmlPatterns module will + \e{not} be built if exceptions are disabled, or if you compile Qt + with a compiler that doesn't support member templates, e.g., MSVC + 6. + + See the QXmlQuery documentation for more information about the + QtXmlPatterns C++ API. + + \section2 Running the query engine from the command line utility + + \e xmlpatterns is a command line utility for running XQueries. It + expects the name of a file containing the XQuery text. + + \snippet doc/src/snippets/code/doc_src_qtxmlpatterns.qdoc 2 + + The XQuery in \c{myQuery.xq} will be evaluated and its output + written to \c stdout. Pass the \c -help switch to get the list of + input flags and their meanings. + + xmlpatterns can be used in scripting. However, the descriptions + and messages it outputs were not meant to be parsed and may be + changed in future releases of Qt. + + \target QtXDM + \section1 The XQuery Data Model + + XQuery represents data items as \e{atomic values} or \e{nodes}. An + atomic value is a value in the domain of one of the + \l{http://www.w3.org/TR/xmlschema-2/#built-in-datatypes} {built-in + datatypes} defined in \l{http://www.w3.org/TR/xmlschema-2} {Part + 2} of the W3C XML Schema. A node is normally an XML element or + attribute, but when non-XML data is \l{QAbstractXmlNodeModel} + {modeled to look like XML}, a node can also represent a non-XML + data items. + + When you run an XQuery using the C++ API in a Qt application, you + will often want to bind program variables to $variables in the + XQuery. After the query is evaluated, you will want to interpret + the sequence of data items in the result set. + + \section2 Binding program variables to XQuery variables + + When you want to run a parameterized XQuery from your Qt + application, you will need to \l{QXmlQuery::bindVariable()} {bind + variables} in your program to $name variables in your XQuery. + + Suppose you want to parameterize the bibliography XQuery in the + example above. You could define variables for the catalog that + contains the library (\c{$file}), the publisher name + (\c{$publisher}), and the year of publication (\c{$year}): + + \target qtxmlpatterns_example_query2 + \quotefile snippets/patternist/introExample2.xq + + Modify the QtXmlPatterns code to use one of the \l{QXmlQuery::} + {bindVariable()} functions to bind a program variable to each + XQuery $variable: + + \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 4 + + Each program variable is passed to QtXmlPatterns as a QVariant of + the type of the C++ variable or constant from which it is + constructed. Note that QtXmlPatterns assumes that the type of the + QVariant in the bindVariable() call is the correct type, so the + $variable it is bound to must be used in the XQuery accordingly. + The following table shows how QVariant types are mapped to XQuery + $variable types: + + \table + + \header + \o QVariant type + \o XQuery $variable type + + \row + \o QVariant::LongLong + \o \c xs:integer + + \row + \o QVariant::Int + \o \c xs:integer + + \row + \o QVariant::UInt + \o \c xs:nonNegativeInteger + + \row + \o QVariant::ULongLong + \o \c xs:unsignedLong + + \row + \o QVariant::String + \o \c xs:string + + \row + \o QVariant::Double + \o \c xs:double + + \row + \o QVariant::Bool + \o \c xs:boolean + + \row + \o QVariant::Double + \o \c xs:decimal + + \row + \o QVariant::ByteArray + \o \c xs:base64Binary + + \row + \o QVariant::StringList + \o \c xs:string* + + \row + \o QVariant::Url + \o \c xs:string + + \row + \o QVariant::Date + \o \c xs:date. + + \row + \o QVariant::DateTime + \o \c xs:dateTime + + \row + \o QVariant::Time. + \o \c xs:time. (see \l{Binding To Time}{Binding To + QVariant::Time} below) + + \row + \o QVariantList + \o (see \l{Binding To QVariantList}{Binding To QVariantList} + below) + + \endtable + + A type not shown in the table is not supported and will cause + undefined XQuery behavior or a $variable binding error, depending + on the context in the XQuery where the variable is used. + + \target Binding To Time + \section3 Binding To QVariant::Time + + Because the instance of QTime used in QVariant::Time does not + include a zone offset, an instance of QVariant::Time should not be + bound to an XQuery variable of type \c xs:time, unless the QTime is + UTC. When binding a non-UTC QTime to an XQuery variable, it should + first be passed as a string, or converted to a QDateTime with an arbitrary + date, and then bound to an XQuery variable of type \c xs:dateTime. + + \target Binding To QVariantList + \section3 Binding To QVariantList + + A QVariantList can be bound to an XQuery $variable. All the + \l{QVariant}s in the list must be of the same atomic type, and the + $variable the variant list is bound to must be of that same atomic + type. If the QVariants in the list are not all of the same atomic + type, the XQuery behavior is undefined. + + \section2 Interpreting XQuery results + + When the results of an XQuery are returned in a sequence of \l + {QXmlResultItems} {result items}, atomic values in the sequence + are treated as instances of QVariant. Suppose that instead of + serializing the results of the XQuery as XML, we process the + results programatically. Modify the standard QtXmlPatterns code + sequence to call the overload of QXmlQuery::evaluateTo() that + populates a sequence of \l {QXmlResultItems} {result items} with + the XQuery results: + + \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 5 + + Iterate through the \l {QXmlResultItems} {result items} and test + each QXmlItem to see if it is an atomic value or a node. If it is + an atomic value, convert it to a QVariant with \l {QXmlItem::} + {toAtomicValue()} and switch on its \l {QVariant::type()} {variant + type} to handle all the atomic values your XQuery might return. + The following table shows the QVariant type to expect for each + atomic value type (or QXmlName): + + \table + + \header + \o XQuery result item type + \o QVariant type returned + + \row + \o \c xs:QName + \o QXmlName (see \l{Handling QXmlNames}{Handling QXmlNames} + below) + + \row + \o \c xs:integer + \o QVariant::LongLong + + \row + \o \c xs:string + \o QVariant::String + + \row + \o \c xs:string* + \o QVariant::StringList + + \row + \o \c xs:double + \o QVariant::Double + + \row + \o \c xs:float + \o QVariant::Double + + \row + \o \c xs:boolean + \o QVariant::Bool + + \row + \o \c xs:decimal + \o QVariant::Double + + \row + \o \c xs:hexBinary + \o QVariant::ByteArray + + \row + \o \c xs:base64Binary + \o QVariant::ByteArray + + \row + \o \c xs:gYear + \o QVariant::DateTime + + \row + \o \c xs:gYearMonth + \o QVariant::DateTime + + \row + \o \c xs:gMonthDay + \o QVariant::DateTime + + \row + \o \c xs:gDay + \o QVariant::DateTime + + \row + \o \c xs:gMonth + \o QVariant::DateTime + + \row + \o \c xs:anyURI + \o QVariant::Url + + \row + \o \c xs:untypedAtomic + \o QVariant::String + + \row + \o \c xs:ENTITY + \o QVariant::String + + \row + \o \c xs:date + \o QVariant::DateTime + + \row + \o \c xs:dateTime + \o QVariant::DateTime + + \row + \o \c xs:time + \o (see \l{xstime-not-mapped}{No mapping for xs:time} below) + + \endtable + + \target Handling QXmlNames + \section3 Handling QXmlNames + + If your XQuery can return atomic value items of type \c{xs:QName}, + they will appear in your QXmlResultItems as instances of QXmlName. + Since the QVariant class does not support the QXmlName class + directly, extracting them from QXmlResultItems requires a bit of + slight-of-hand using the \l{QMetaType} {Qt metatype system}. We + must modify our example to use a couple of template functions, a + friend of QMetaType (qMetaTypeId<T>()) and a friend of QVariant + (qVariantValue<T>()): + + \snippet doc/src/snippets/code/src_xmlpatterns_api_qxmlquery.cpp 6 + + To access the strings in a QXmlName returned by an + \l{QXmlQuery::evaluateTo()} {XQuery evaluation}, the QXmlName must + be accessed with the \l{QXmlNamePool} {name pool} from the + instance of QXmlQuery that was used for the evaluation. + + \target xstime-not-mapped + \section3 No mapping for xs:time + + An instance of \c xs:time can't be represented correctly as an + instance of QVariant::Time, unless the \c xs:time is a UTC time. + This is because xs:time has a zone offset (0 for UTC) in addition + to the time value, which the QTime in QVariant::Time does not + have. This means that if an XQuery tries to return an atomic value + of type \c xs:time, an invalid QVariant will be returned. A query + can return an atomic value of type xs:time by either converting it + to an \c xs:dateTime with an arbitrary date, or to an \c xs:string. + + \section1 Using XQuery with Non-XML Data + + Although the XQuery language was designed for querying XML, with + QtXmlPatterns one can use XQuery for querying any data that can + be modeled to look like XML. Non-XML data is modeled to look like + XML by loading it into a custom subclass of QAbstractXmlNodeModel, + where it is then presented to the QtXmlPatterns XQuery engine via + the same API the XQuery engine uses for querying XML. + + When QtXmlPatterns loads and queries XML files and produces XML + output, it can always load the XML data into its default XML node + model, where it can be traversed efficiently. The XQuery below + traverses the product orders found in the XML file \e myOrders.xml + to find all the skin care product orders and output them ordered + by shipping date. + + \quotefile snippets/patternist/introAcneRemover.xq + + QtXmlPatterns can be used out of the box to perform this + query, provided \e myOrders.xml actually contains well-formed XML. It + can be loaded directly into the default XML node model and + traversed. But suppose we want QtXmlPatterns to perform queries on + the hierarchical structure of the local file system. The default + XML node model in QtXmlPatterns is not suitable for navigating the + file system, because there is no XML file to load that contains a + description of it. Such an XML file, if it existed, might look + something like this: + + \quotefile snippets/patternist/introFileHierarchy.xml + + The \l{File System Example}{File System Example} does exactly this. + + There is no such file to load into the default XML node model, but + one can write a subclass of QAbstractXmlNodeModel to represent the + file system. This custom XML node model, once populated with all + the directory and file descriptors obtained directly from the + system, presents the complete file system hierarchy to the query + engine via the same API used by the default XML node model to + present the contents of an XML file. In other words, once the + custom XML node model is populated, it presents the file system to + the query engine as if a description of it had been loaded into + the default XML node model from an XML file like the one shown + above. + + Now we can write an XQuery to find all the XML files and parse + them to find the ones that don't contain well-formed XML. + + \quotefromfile snippets/patternist/introNavigateFS.xq + \skipto <html> + \printuntil + + Without QtXmlPatterns, there is no simple way to solve this kind + of problem. You might do it by writing a C++ program to traverse + the file system, sniff out all the XML files, and submit each one + to an XML parser to test that it contains valid XML. The C++ code + required to write that program will probably be more complex than + the C++ code required to subclass QAbstractXmlNodeModel, but even + if the two are comparable, your custom C++ program can be used + only for that one task, while your custom XML node model can be + used by any XQuery that must navigate the file system. + + The general approach to using XQuery to perform queries on non-XML + data has been a three step process. In the first step, the data is + loaded into a non-XML data model. In the second step, the non-XML + data model is serialized as XML and output to XML (text) files. In + the final step, an XML tool loads the XML files into a second, XML + data model, where the XQueries can be performed. The development + cost of implementing this process is often high, and the three + step system that results is inefficient because the two data + models must be built and maintained separately. + + With QtXmlPatterns, subclassing QAbstractXmlNodeModel eliminates + the transformation required to convert the non-XML data model to + the XML data model, because there is only ever one data model + required. The non-XML data model presents the non-XML data to the + query engine via the XML data model API. Also, since the query + engine uses the API to access the QAbstractXmlNodeModel, the data + model subclass can construct the elements, attributes and other + data on demand, responding to the query's specific requests. This + can greatly improve efficiency, because it means the entire model + might not have to be built. For example, in the file system model + above, it is not necessary to build an instance for a whole + XML file representing the whole file system. Instead nodes are + created on demand, which also likely is a small subset of the file + system. + + Examples of other places where XQuery could be used in + QtXmlPatterns to query non-XML data: + + \list + + \o The internal representation for word processor documents + + \o The set of dependencies for a software build system + + \o The hierarchy (or graph) that links a set of HTML documents + from a web crawler + + \o The images and meta-data in an image collection + + \o The set of D-Bus interfaces available in a system + + \o A QObject hierarchy, as seen in the \l{QObject XML Model + Example} {QObject XML Model example}. + + \endlist + + See the QAbstractXmlNodeModel documentation for information about + how to implement custom XML node models. + + \section1 More on using QtXmlPatterns with non-XML Data + + Subclassing QAbstractXmlNodeModel to let the query engine access + non-XML data by the same API it uses for XML is the feature that + enables QtXmlPatterns to query non-XML data with XQuery. It allows + XQuery to be used as a mapping layer between different non-XML + node models or between a non-XML node model and the built-in XML + node model. Once the subclass(es) of QAbstractXmlNodeModel have + been written, XQuery can be used to select a set of elements from + one node model, transform the selected elements, and then write + them out, either as XML using QXmlQuery::evaluateTo() and QXmlSerializer, + or as some other format using a subclass of QAbstractXmlReceiver. + + Consider a word processor application that must import and export + data in several different formats. Rather than writing a lot of + C++ code to convert each input format to an intermediate form, and + more C++ code to convert the intermediate form back to each + output format, one can implement a solution based on QtXmlPatterns + that uses simple XQueries to transform each XML or non-XML format + (e.g. MathFormula.xml below) to the intermediate form (e.g. the + DocumentRepresentation node model class below), and more simple + XQueries to transform the intermediate form back to each XML or + non-XML format. + + \image patternist-wordProcessor.png + + Because CSV files are not XML, a subclass of QAbstractXmlNodeModel + is used to present the CSV data to the XQuery engine as if it were + XML. What are not shown are the subclasses of QAbstractXmlReceiver + that would then send the selected elements into the + DocumentRepresentation node model, and the subclasses of + QAbstractXmlNodeModel that would ultimately write the output files + in each format. + + \section1 Security Considerations + + \section2 Code Injection + + XQuery is vulnerable to + \l{http://en.wikipedia.org/wiki/Code_injection} {code injection + attacks} in the same way as the SQL language. If an XQuery is + constructed by concatenating strings, and the strings come from + user input, the constructed XQuery could be malevolent. The best + way to prevent code injection attacks is to not construct XQueries + from user-written strings, but only accept user data input using + QVariant and variable bindings. See QXmlQuery::bindVariable(). + + The articles + \l{http://www.ibm.com/developerworks/xml/library/x-xpathinjection.html} + {Avoid the dangers of XPath injection}, by Robi Sen and + \l{http://www.packetstormsecurity.org/papers/bypass/Blind_XPath_Injection_20040518.pdf} + {Blind XPath Injection}, by Amit Klein, discuss the XQuery code + injection problem in more detail. + + \section2 Denial of Service Attacks + + Applications using QtXmlPatterns are subject to the same + limitations of software as other systems. Generally, these can not + be checked. This means QtXmlPatterns does not prevent rogue + queries from consuming too many resources. For example, a query + could take too much time to execute or try to transfer too much + data. A query could also do too much recursion, which could crash + the system. XQueries can do these things accidentally, but they + can also be done as deliberate denial of service attacks. + + \section1 Features and Conformance + + \section2 XQuery 1.0 + + QtXmlPatterns aims at being a + \l{http://www.w3.org/TR/xquery/#id-xquery-conformance} {conformant + XQuery processor}. It adheres to + \l{http://www.w3.org/TR/xquery/#id-minimal-conformance} {Minimal + Conformance} and supports the + \l{http://www.w3.org/TR/xquery/#id-serialization-feature} + {Serialization Feature} and the + \l{http://www.w3.org/TR/xquery/#id-full-axis-feature} {Full Axis + Feature}. QtXmlPatterns currently passes 97% of the tests in the + \l{http://www.w3.org/XML/Query/test-suite} {XML Query Test Suite}. + Areas where conformance may be questionable and where behavior may + be changed in future releases include: + + \list + + \o Some corner cases involving namespaces and element constructors + are incorrect. + + \o XPath is a subset of XQuery and the implementation of + QtXmlPatterns uses XPath 2.0 with XQuery 1.0. + + \endlist + + The specifications discusses conformance further: + \l{http://www.w3.org/TR/xquery/}{XQuery 1.0: An XML Query + Language}. W3C's XQuery testing effort can be of interest as + well, \l{http://www.w3.org/XML/Query/test-suite/}{XML Query Test + Suite}. + + Currently \c fn:collection() does not access any data set, and + there is no API for providing data through the collection. As a + result, evaluating \c fn:collection() returns the empty + sequence. We intend to provide functionality for this in a future + release of Qt. + + Only queries encoded in UTF-8 are supported. + + \section2 XSLT 2.0 + + Partial support for XSLT was introduced in Qt 4.5. Future + releases of QtXmlPatterns will aim to support these XSLT + features: + + \list + \o Basic XSLT 2.0 processor + \o Serialization feature + \o Backwards Compatibility feature + \endlist + + For details, see \l{http://www.w3.org/TR/xslt20/#conformance}{XSL + Transformations (XSLT) Version 2.0, 21 Conformance}. + + \note In this release, XSLT support is considered experimental. + + Unsupported or partially supported XSLT features are documented + in the following table. The implementation of XSLT in Qt 4.5 can + be seen as XSLT 1.0 but with the data model of XPath 2.0 and + XSLT 2.0, and using the using the functionality of XPath 2.0 and + its accompanying function library. When QtXmlPatterns encounters + an unsupported or partially support feature, it will either report + a syntax error or silently continue, unless otherwise noted in the + table. + + The implementation currently passes 42% of W3C's XSLT test suite, + which focus on features introduced in XSLT 2.0. + + \table + \header + \o XSL Feature + \o Support Status + \row + \o \c xsl:key and \c fn:key() + \o not supported + \row + \o \c xsl:include + \o not supported + \row + \o \c xsl:import + \o not supported + \row + \o \c xsl:copy + + \o The \c copy-namespaces and \c inherit-namespaces attributes + have no effect. For copied comments, attributes and + processing instructions, the copy has the same node + identity as the original. + + \row + \o \c xsl:copy-of + \o The \c copy-namespaces attribute has no effect. + \row + \o \c fn:format-number() + \o not supported + \row + \o \c xsl:message + \o not supported + \row + \o \c xsl:use-when + \o not supported + \row + \o \c Tunnel Parameters + \o not supported + \row + \o \c xsl:attribute-set + \o not supported + \row + \o \c xsl:decimal-format + \o not supported + \row + \o \c xsl:fallback + \o not supported + \row + \o \c xsl:apply-imports + \o not supported + \row + \o \c xsl:character-map + \o not supported + \row + \o \c xsl:number + \o not supported + \row + \o \c xsl:namespace-alias + \o not supported + \row + \o \c xsl:output + \o not supported + \row + \o \c xsl:output-character + \o not supported + \row + \o \c xsl:preserve-space + \o not supported + \row + \o \c xsl:result-document + \o not supported + \row + \o Patterns + \o Complex patterns or patterns with predicates have issues. + \row + \o \c 2.0 Compatibility Mode + + \o Stylesheets are interpreted as XSLT 2.0 stylesheets, even + if the \c version attribute is in the XSLT source is + 1.0. In other words, the version attribute is ignored. + + \row + \o Grouping + + \o \c fn:current-group(), \c fn:grouping-key() and \c + xsl:for-each-group. + + \row + \o Regexp elements + \o \c xsl:analyze-string, \c xsl:matching-substring, + \c xsl:non-matching-substring, and \c fn:regex-group() + \row + \o Date & Time formatting + \o \c fn:format-dateTime(), \c fn:format-date() and fn:format-time(). + + \row + \o XPath Conformance + \o Since XPath is a subset of XSLT, its issues are in affect too. + \endtable + + The QtXmlPatterns implementation of the XPath Data Model does not + include entities (due to QXmlStreamReader not reporting them). + This means that functions \c unparsed-entity-uri() and \c + unparsed-entity-public-id() always return negatively. + + \section2 XPath 2.0 + + Since XPath 2.0 is a subset of XQuery 1.0, XPath 2.0 is + supported. Areas where conformance may be questionable and, + consequently, where behavior may be changed in future releases + include: + + \list + \o Regular expression support is currently not conformant + but follows Qt's QRegExp standard syntax. + + \o Operators for \c xs:time, \c xs:date, and \c xs:dateTime + are incomplete. + + \o Formatting of very large or very small \c xs:double, \c + xs:float, and \c xs:decimal values may be incorrect. + \endlist + + \section2 xml:id + + Processing of XML files supports \c xml:id. This allows elements + that have an attribute named \c xml:id to be looked up efficiently + with the \c fn:id() function. See + \l{http://www.w3.org/TR/xml-id/}{xml:id Version 1.0} for details. + + \section2 Resource Loading + + When QtXmlPatterns loads an XML resource, e.g., using the + \c fn:doc() function, the following schemes are supported: + + \table + \header + \o Scheme Name + \o Description + \row + \o \c file + \o Local files. + \row + \o \c data + + \o The bytes are encoded in the URI itself. e.g., \c + data:application/xml,%3Ce%2F%3E is \c <e/>. + + \row + \o \c ftp + \o Resources retrieved via FTP. + \row + \o \c http + \o Resources retrieved via HTTP. + \row + \o \c https + \o Resources retrieved via HTTPS. This will succeed if no SSL + errors are encountered. + \row + \o \c qrc + \o Qt Resource files. Expressing it as an empty scheme, :/..., + is not supported. + + \endtable + + \section2 XML + + XML 1.0 and XML Namespaces 1.0 are supported, as opposed to the + 1.1 versions. When a strings is passed to a query as a QString, + the characters must be XML 1.0 characters. Otherwise, the behavior + is undefined. This is not checked. + + URIs are first passed to QAbstractUriResolver. Check + QXmlQuery::setUriResolver() for possible rewrites. + +*/ + +/*! + \namespace QPatternist + \brief The QPatternist namespace contains classes and functions required by the QtXmlPatterns module. + \internal +*/ |