diff options
Diffstat (limited to 'doc/src/snippets/code/doc_src_qmake-manual.pro')
| -rw-r--r-- | doc/src/snippets/code/doc_src_qmake-manual.pro | 1013 |
1 files changed, 1013 insertions, 0 deletions
diff --git a/doc/src/snippets/code/doc_src_qmake-manual.pro b/doc/src/snippets/code/doc_src_qmake-manual.pro new file mode 100644 index 0000000..e5b749e --- /dev/null +++ b/doc/src/snippets/code/doc_src_qmake-manual.pro @@ -0,0 +1,1013 @@ +/**************************************************************************** +** +** Copyright (C) 2011 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:BSD$ +** You may use this file under the terms of the BSD license as follows: +** +** "Redistribution and use in source and binary forms, with or without +** modification, are permitted provided that the following conditions are +** met: +** * Redistributions of source code must retain the above copyright +** notice, this list of conditions and the following disclaimer. +** * Redistributions in binary form must reproduce the above copyright +** notice, this list of conditions and the following disclaimer in +** the documentation and/or other materials provided with the +** distribution. +** * Neither the name of Nokia Corporation and its Subsidiary(-ies) nor +** the names of its contributors may be used to endorse or promote +** products derived from this software without specific prior written +** permission. +** +** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS +** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT +** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR +** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT +** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT +** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, +** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY +** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE +** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE." +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#! [0] +make all +#! [0] + + +#! [1] +CONFIG += qt thread debug +#! [1] + + +#! [2] +CONFIG += qt +QT += network xml +#! [2] + + +#! [3] +QT = network xml # This will omit the core and gui modules. +#! [3] + + +#! [4] +QT -= gui # Only the core module is used. +#! [4] + + +#! [5] +CONFIG += link_pkgconfig +PKGCONFIG += ogg dbus-1 +#! [5] + + +#! [6] +LIBS += -L/usr/local/lib -lmath +#! [6] + + +#! [7] +INCLUDEPATH = c:/msdev/include d:/stl/include +#! [7] + + +#! [8] +qmake [mode] [options] files +#! [8] + + +#! [9] +qmake -makefile [options] files +#! [9] + + +#! [10] +qmake -makefile -unix -o Makefile "CONFIG+=test" test.pro +#! [10] + + +#! [11] +qmake "CONFIG+=test" test.pro +#! [11] + + +#! [12] +qmake -project [options] files +#! [12] + + +#! [13] +qmake -spec macx-g++ +#! [13] + + +#! [14] +QMAKE_LFLAGS += -F/path/to/framework/directory/ +#! [14] + + +#! [15] +LIBS += -framework TheFramework +#! [15] + + +#! [16] +TEMPLATE = lib +CONFIG += lib_bundle +#! [16] + + +#! [17] +FRAMEWORK_HEADERS.version = Versions +FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h +FRAMEWORK_HEADERS.path = Headers +QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS +#! [17] + + +#! [18] +CONFIG += x86 ppc +#! [18] + + +#! [19] +qmake -spec macx-xcode project.pro +#! [19] + + +#! [20] +qmake -tp vc +#! [20] + + +#! [21] +qmake -tp vc -r +#! [21] + + +#! [22] +CONFIG -= embed_manifest_exe +#! [22] + + +#! [23] +CONFIG -= embed_manifest_dll +#! [23] + + +#! [24] +make all +#! [24] + + +#! [25] +build_pass:CONFIG(debug, debug|release) { + unix: TARGET = $$join(TARGET,,,_debug) + else: TARGET = $$join(TARGET,,,d) +} +#! [25] + + +#! [26] +CONFIG += qt console newstuff +... +newstuff { + SOURCES += new.cpp + HEADERS += new.h +} +#! [26] + + +#! [27] +DEFINES += USE_MY_STUFF QT_DLL +#! [27] + + +#! [28] +myFiles.sources = path\*.png +DEPLOYMENT += myFiles +#! [28] + + +#! [29] +myFiles.sources = path\file1.ext1 path2\file2.ext1 path3\* +myFiles.path = \some\path\on\device +someother.sources = C:\additional\files\* +someother.path = \myFiles\path2 +DEPLOYMENT += myFiles someother +#! [29] + + +#! [30] +DESTDIR = ../../lib +#! [30] + + +#! [31] +DISTFILES += ../program.txt +#! [31] + + +#! [32] +FORMS = mydialog.ui \ + mywidget.ui \ + myconfig.ui +#! [32] + + +#! [33] +FORMS3 = my_uic3_dialog.ui \ + my_uic3_widget.ui \ + my_uic3_config.ui +#! [33] + + +#! [34] +HEADERS = myclass.h \ + login.h \ + mainwindow.h +#! [34] + + +#! [35] +INCLUDEPATH = c:/msdev/include d:/stl/include +#! [35] + + +#! [36] +target.path += $$[QT_INSTALL_PLUGINS]/imageformats +INSTALLS += target +#! [36] + + +#! [37] +LEXSOURCES = lexer.l +#! [37] + + +#! [38] +unix:LIBS += -L/usr/local/lib -lmath +win32:LIBS += c:/mylibs/math.lib +#! [38] + + +#! [39] +CONFIG += no_lflags_merge +#! [39] + + +#! [40] +unix:MOC_DIR = ../myproject/tmp +win32:MOC_DIR = c:/myproject/tmp +#! [40] + + +#! [41] +unix:OBJECTS_DIR = ../myproject/tmp +win32:OBJECTS_DIR = c:/myproject/tmp +#! [41] + + +#! [42] +app { + # Conditional code for 'app' template here +} +#! [42] + + +#! [43] +FRAMEWORK_HEADERS.version = Versions +FRAMEWORK_HEADERS.files = path/to/header_one.h path/to/header_two.h +FRAMEWORK_HEADERS.path = Headers +QMAKE_BUNDLE_DATA += FRAMEWORK_HEADERS +#! [43] + + +#! [44] +QMAKE_BUNDLE_EXTENSION = .myframework +#! [44] + + +#! [45] +QMAKE_RESOURCE_FLAGS += -threshold 0 -compress 9 +#! [45] + + +#! [46] +QMAKE_UIC = uic -L /path/to/plugin +#! [46] + + +#! [47] +QT -= gui # Only the core module is used. +#! [47] + + +#! [48] +unix:RCC_DIR = ../myproject/resources +win32:RCC_DIR = c:/myproject/resources +#! [48] + + +#! [49] +SOURCES = myclass.cpp \ + login.cpp \ + mainwindow.cpp +#! [49] + + +#! [50] +SUBDIRS = kernel \ + tools +#! [50] + + +#! [51] +CONFIG += ordered +#! [51] + + +#! [52] +TEMPLATE = app +TARGET = myapp +SOURCES = main.cpp +#! [52] + + +#! [53] +TEMPLATE = lib +SOURCES = main.cpp +TARGET = mylib +#! [53] + + +#! [54] +unix:UI_DIR = ../myproject/ui +win32:UI_DIR = c:/myproject/ui +#! [54] + + +#! [55] +unix:UI_HEADERS_DIR = ../myproject/ui/include +win32:UI_HEADERS_DIR = c:/myproject/ui/include +#! [55] + + +#! [56] +unix:UI_SOURCES_DIR = ../myproject/ui/src +win32:UI_SOURCES_DIR = c:/myproject/ui/src +#! [56] + + +#! [57] +VERSION = 1.2.3 +#! [57] + + +#! [58] +YACCSOURCES = moc.y +#! [58] + + +#! [59] +FILE = /etc/passwd +FILENAME = $$basename(FILE) #passwd +#! [59] + + +#! [60] +CONFIG = debug +CONFIG += release +CONFIG(release, debug|release):message(Release build!) #will print +CONFIG(debug, debug|release):message(Debug build!) #no print +#! [60] + + +#! [61] +contains( drivers, network ) { + # drivers contains 'network' + message( "Configuring for network build..." ) + HEADERS += network.h + SOURCES += network.cpp +} +#! [61] + + +#! [62] +error(An error has occurred in the configuration process.) +#! [62] + + +#! [63] +exists( $(QTDIR)/lib/libqt-mt* ) { + message( "Configuring for multi-threaded Qt..." ) + CONFIG += thread +} +#! [63] + + +#! [64] +MY_VAR = one two three four +MY_VAR2 = $$join(MY_VAR, " -L", -L) -Lfive +MY_VAR3 = $$member(MY_VAR, 2) $$find(MY_VAR, t.*) +#! [64] + + +#! [65] +LIST = 1 2 3 +for(a, LIST):exists(file.$${a}):message(I see a file.$${a}!) +#! [65] + + +#! [66] +include( shared.pri ) +OPTIONS = standard custom +!include( options.pri ) { + message( "No custom build options specified" ) +OPTIONS -= custom +} +#! [66] + + +#! [67] +isEmpty( CONFIG ) { +CONFIG += qt warn_on debug +} +#! [67] + + +#! [68] +message( "This is a message" ) +#! [68] + + +#! [69] +!build_pass:message( "This is a message" ) +#! [69] + + +#! [70] +This is a test. +#! [70] + + +#! [71] +system(ls /bin):HAS_BIN=FALSE +#! [71] + + +#! [72] +UNAME = $$system(uname -s) +contains( UNAME, [lL]inux ):message( This looks like Linux ($$UNAME) to me ) +#! [72] + + +#! [73] +ARGS = 1 2 3 2 5 1 +ARGS = $$unique(ARGS) #1 2 3 5 +#! [73] + + +#! [74] +qmake -set VARIABLE VALUE +#! [74] + + +#! [75] +qmake -query VARIABLE +qmake -query #queries all current VARIABLE/VALUE pairs.. +#! [75] + + +#! [76] +qmake -query "1.06a/VARIABLE" +#! [76] + + +#! [77] +qmake -query "QT_INSTALL_PREFIX" +#! [77] + + +#! [78] +QMAKE_VERS = $$[QMAKE_VERSION] +#! [78] + + +#! [79] +documentation.path = /usr/local/program/doc +documentation.files = docs/* +#! [79] + + +#! [80] +INSTALLS += documentation +#! [80] + + +#! [81] +unix:documentation.extra = create_docs; mv master.doc toc.doc +#! [81] + + +#! [82] +target.path = /usr/local/myprogram +INSTALLS += target +#! [82] + + +#! [83] +CONFIG += create_prl +#! [83] + + +#! [84] +CONFIG += link_prl +#! [84] + + +#! [85] +QMAKE_EXT_MOC = .mymoc +#! [85] + + +#! [86] +mytarget.target = .buildfile +mytarget.commands = touch $$mytarget.target +mytarget.depends = mytarget2 + +mytarget2.commands = @echo Building $$mytarget.target +#! [86] + + +#! [87] +QMAKE_EXTRA_TARGETS += mytarget mytarget2 +#! [87] + + +#! [88] +new_moc.output = moc_${QMAKE_FILE_BASE}.cpp +new_moc.commands = moc ${QMAKE_FILE_NAME} -o ${QMAKE_FILE_OUT} +new_moc.depend_command = g++ -E -M ${QMAKE_FILE_NAME} | sed "s,^.*: ,," +new_moc.input = NEW_HEADERS +QMAKE_EXTRA_COMPILERS += new_moc +#! [88] + + +#! [89] +TARGET = myapp +#! [89] + + +#! [90] +DEFINES += QT_DLL +#! [90] + + +#! [91] +DEFINES -= QT_DLL +#! [91] + + +#! [92] +DEFINES *= QT_DLL +#! [92] + + +#! [93] +DEFINES ~= s/QT_[DT].+/QT +#! [93] + + +#! [94] +EVERYTHING = $$SOURCES $$HEADERS +message("The project contains the following files:") +message($$EVERYTHING) +#! [94] + + +#! [95] +win32:DEFINES += QT_DLL +#! [95] + + +#! [96] +win32:xml { + message(Building for Windows) + SOURCES += xmlhandler_win.cpp +} else:xml { + SOURCES += xmlhandler.cpp +} else { + message("Unknown configuration") +} +#! [96] + + +#! [97] +MY_VARIABLE = value +#! [97] + + +#! [98] +MY_DEFINES = $$DEFINES +#! [98] + + +#! [99] +MY_DEFINES = $${DEFINES} +#! [99] + + +#! [100] +TARGET = myproject_$${TEMPLATE} +#! [100] + + +#! [101] +target.path = $$[QT_INSTALL_PLUGINS]/designer +INSTALLS += target +#! [101] + + +#! [102] +defineReplace(functionName){ + #function code +} +#! [102] + + +#! [103] +CONFIG += myfeatures +#! [103] + + +#! [105] +PRECOMPILED_HEADER = stable.h +#! [105] + + +#! [106] +precompile_header:!isEmpty(PRECOMPILED_HEADER) { +DEFINES += USING_PCH +} +#! [106] + + +#! [107] +PRECOMPILED_HEADER = window.h +SOURCES = window.cpp +#! [107] + + +#! [108] +SOURCES += hello.cpp +#! [108] + + +#! [109] +SOURCES += hello.cpp +SOURCES += main.cpp +#! [109] + + +#! [110] +SOURCES = hello.cpp \ + main.cpp +#! [110] + + +#! [111] +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +#! [111] + + +#! [112] +TARGET = helloworld +#! [112] + + +#! [113] +CONFIG += qt +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +#! [113] + + +#! [114] +qmake -o Makefile hello.pro +#! [114] + + +#! [115] +qmake -tp vc hello.pro +#! [115] + + +#! [116] +CONFIG += qt debug +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +#! [116] + + +#! [117] +win32 { + SOURCES += hellowin.cpp +} +#! [117] + + +#! [118] +CONFIG += qt debug +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +win32 { + SOURCES += hellowin.cpp +} +unix { + SOURCES += hellounix.cpp +} +#! [118] + + +#! [119] +!exists( main.cpp ) { + error( "No main.cpp file found" ) +} +#! [119] + + +#! [120] +CONFIG += qt debug +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +win32 { + SOURCES += hellowin.cpp +} +unix { + SOURCES += hellounix.cpp +} +!exists( main.cpp ) { + error( "No main.cpp file found" ) +} +#! [120] + + +#! [121] +win32 { + debug { + CONFIG += console + } +} +#! [121] + + +#! [122] +CONFIG += qt debug +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +win32 { + SOURCES += hellowin.cpp +} +unix { + SOURCES += hellounix.cpp +} +!exists( main.cpp ) { + error( "No main.cpp file found" ) +} +win32:debug { + CONFIG += console +} +#! [122] + + +#! [123] +TEMPLATE = app +DESTDIR = c:/helloapp +HEADERS += hello.h +SOURCES += hello.cpp +SOURCES += main.cpp +DEFINES += QT_DLL +CONFIG += qt warn_on release +#! [123] + + +#! [124] +make all +#! [124] + + +#! [125] +make +#! [125] + + +#! [126] +make install +#! [126] + + +#! [127] +CONFIG(debug, debug|release) { + mac: TARGET = $$join(TARGET,,,_debug) + win32: TARGET = $$join(TARGET,,d) +} +#! [127] + +#! [128] +customplugin.sources = customimageplugin.dll +customplugin.sources += c:\myplugins\othercustomimageplugin.dll +customplugin.path = imageformats +dynamiclibrary.sources = mylib.dll helper.exe +dynamiclibrary.path = \sys\bin +globalplugin.sources = someglobalimageplugin.dll +globalplugin.path = \resource\qt\plugins\imageformats +DEPLOYMENT += customplugin dynamiclibrary globalplugin +#! [128] + +#! [129] +TARGET.EPOCALLOWDLLDATA = 1 +#! [129] + +#! [130] +TARGET.EPOCHEAPSIZE = 10000 10000000 +TARGET.EPOCSTACKSIZE = 0x8000 +#! [130] + +#! [131] +QMAKE_CXXFLAGS.CW += -O2 +QMAKE_CXXFLAGS.ARMCC += -O0 +#! [131] + +#! [132] +TARGET.UID2 = 0x00000001 +TARGET.UID3 = 0x00000002 +TARGET.SID = 0x00000003 +TARGET.VID = 0x00000004 +#! [132] + +#! [133] +TARGET.CAPABILITY += AllFiles +#! [133] + +#! [134] +TARGET.CAPABILITY = ALL -TCB -DRM -AllFiles +#! [134] + +#! [135] +TARGET.EPOCHEAPSIZE = 10000 10000000 +#! [135] + +#! [136] +TARGET.EPOCSTACKSIZE = 0x8000 +#! [136] + +#! [137] +MMP_RULES += "DEFFILE hello.def" +#! [137] + +#! [138] +myBlock = \ +"START RESOURCE foo.rss" \ +"TARGET bar" \ +"TARGETPATH private\10001234" \ +"HEADER" \ +"LANG 01" \ +"UID 0x10002345 0x10003456" \ +"END" + +MMP_RULES += myBlock +#! [138] + +#! [139] +myIfdefBlock = \ +"$${LITERAL_HASH}ifdef WINSCW" \ +"DEFFILE hello_winscw.def" \ +"$${LITERAL_HASH}endif" + +MMP_RULES += myIfdefBlock +#! [139] + +#! [140] +somelib.sources = somelib.dll +somelib.path = \sys\bin +somelib.pkg_prerules = "(0x12345678), 2, 2, 0, {\"Some Package\"}" \ + "(0x87654321), 1, *, * ~ 2, 2, 0, {\"Some Other Package\"}" +justdep.pkg_prerules = "(0xAAAABBBB), 0, 2, 0, {\"My Framework\"}" +DEPLOYMENT += somelib justdep +#! [140] + +#! [141] +default_deployment.pkg_prerules -= pkg_platform_dependencies +my_deployment.pkg_prerules = "[0x11223344],0,0,0,{\"SomeSpecificDeviceID\"}" +DEPLOYMENT += my_deployment +#! [141] + +#! [142] +DEPLOYMENT_PLUGIN += qjpeg +#! [142] + +#! [143] +myextension = \ + "start extension myextension" \ + "$${LITERAL_HASH}if defined(WINSCW)" \ + "option MYOPTION foo" \ + "$${LITERAL_HASH}endif" \ + "option MYOPTION bar" \ + "end" +BLD_INF_RULES.prj_extensions += myextension +#! [143] + +#! [144] +RSS_RULES += "hidden = KAppIsHidden;" +#! [144] + +#! [145] +myrssrules = \ + "hidden = KAppIsHidden;" \ + "launch = KAppLaunchInBackground;" \ +RSS_RULES += myrssrules +#! [145] + +#! [146] +DEPLOYMENT.installer_header = 0x12345678 +#! [146] + +#! [147] +DEPLOYMENT.installer_header = "$${LITERAL_HASH}{\"My Application Installer\"},(0x12345678),1,0,0" +#! [147] + +#! [148] +# Set conditional libraries +LIB.MARM = "LIBRARY myarm.lib" +LIB.WINSCW = "LIBRARY mywinscw.lib" +LIB.default = "LIBRARY mydefault.lib" + +# Add the conditional MMP rules +MYCONDITIONS = MARM WINSCW +MYVARIABLES = LIB + +addMMPRules(MYCONDITIONS, MYVARIABLES) +#! [148] + +#! [149] +SUBDIRS += my_executable my_library +my_executable.subdir = app +my_executable.depends = my_library +my_library.subdir = lib +#! [149] + +#! [150] +symbian { + SUBDIRS += emulator_dll + emulator_dll.condition = WINSCW +} +#! [150] + +#! [151] +RSS_RULES.service_list += "uid = 0x12345678; datatype_list = \{\}; opaque_data = r_my_icon;" +RSS_RULES.footer +="RESOURCE CAPTION_AND_ICON_INFO r_my_icon \{ icon_file =\"$$PWD/my_icon.svg\"; \}" +#! [151] + +#! [152] +my_exports = \ + "foo.h /epoc32/include/mylib/foo.h" \ + "bar.h /epoc32/include/mylib/bar.h" +BLD_INF_RULES.prj_exports += my_exports +#! [152] + +#! [153] +my_note.pkg_postrules.installer = "\"myinstallnote.txt\" - \"\", FILETEXT, TEXTCONTINUE" +DEPLOYMENT += my_note +#! [153] + +#! [154] +DEPLOYMENT -= default_bin_deployment default_resource_deployment default_reg_deployment +#! [154] + +#! [155] +default_bin_deployment.flags += FILERUN RUNINSTALL +dep_note.sources = install_note.txt +dep_note.flags = FILETEXT TEXTEXIT +DEPLOYMENT += dep_note +#! [155] + +#! [156] +DEPLOYMENT.display_name = My Qt App +#! [156] |