diff options
Diffstat (limited to 'doc/src/sql-programming/sql-programming.qdoc')
| -rw-r--r-- | doc/src/sql-programming/sql-programming.qdoc | 614 |
1 files changed, 614 insertions, 0 deletions
diff --git a/doc/src/sql-programming/sql-programming.qdoc b/doc/src/sql-programming/sql-programming.qdoc new file mode 100644 index 0000000..7700a3d --- /dev/null +++ b/doc/src/sql-programming/sql-programming.qdoc @@ -0,0 +1,614 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at http://qt.nokia.com/contact. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \group database + \title Database Classes + + \brief Database related classes, e.g. for SQL databases. +*/ + +/*! + \page sql-programming.html + \title SQL Programming + + \brief Database integration for Qt applications. + + This overview assumes that you have at least a basic knowledge of + SQL. You should be able to understand simple \c SELECT, \c + INSERT, \c UPDATE, and \c DELETE statements. Although the \l + QSqlTableModel class provides an interface to database browsing + and editing that does not require a knowledge of SQL, a basic + understanding of SQL is highly recommended. A standard text + covering SQL databases is \e {An Introduction to Database Systems} + (7th Ed.) by C. J. Date, ISBN 0201385902. + + \section1 Topics: + + \list + \o \l{Database Classes} + \o \l{Connecting to Databases} + \list + \o \l{SQL Database Drivers} + \endlist + \o \l{Executing SQL Statements} + \list + \o \l{Recommended Use of Data Types in Databases} + \endlist + \o \l{Using the SQL Model Classes} + \o \l{Presenting Data in a Table View} + \o \l{Creating Data-Aware Forms} + \endlist + + \section1 Database Classes + + These classes provide access to SQL databases. + + \annotatedlist database + + The SQL classes are divided into three layers: + + \section2 Driver Layer + + This comprises the classes QSqlDriver, QSqlDriverCreator<T>, + QSqlDriverCreatorBase, QSqlDriverPlugin, and QSqlResult. + + This layer provides the low-level bridge between the specific databases + and the SQL API layer. See \l{SQL Database Drivers} for more information. + + \section2 SQL API Layer + + These classes provide access to databases. Connections + are made using the QSqlDatabase class. Database + interaction is achieved by using the QSqlQuery class. + In addition to QSqlDatabase and QSqlQuery, the SQL API + layer is supported by QSqlError, QSqlField, QSqlIndex, + and QSqlRecord. + + \section2 User Interface Layer + + These classes link the data from a database to data-aware widgets. + They include QSqlQueryModel, QSqlTableModel, and QSqlRelationalTableModel. + These classes are designed to work with Qt's + \l{Model/View Programming}{model/view framework}. + + Note that to use any of these classes, a QCoreApplication object + must have been instantiated first. +*/ + +/*! + \page sql-connecting.html + \title Connecting to Databases + + \contentspage SQL Programming + \nextpage Executing SQL Statements + + To access a database with QSqlQuery or QSqlQueryModel, create and + open one or more database connections. Database connections are + normally identified by connection name, \e{not} by database name. + You can have multiple connections to the same database. + QSqlDatabase also supports the concept of a \e{default} + connection, which is an unnamed connection. When calling QSqlQuery + or QSqlQueryModel member functions that take a connection name + argument, if you don't pass a connection name, the default + connection will be used. Creating a default connection is + convenient when your application only requires one database + connection. + + Note the difference between creating a connection and opening it. + Creating a connection involves creating an instance of class + QSqlDatabase. The connection is not usable until it is opened. The + following snippet shows how to create a \e{default} connection + and then open it: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 26 + + The first line creates the connection object, and the last line + opens it for use. In between, we initialize some connection + information, including the \l{QSqlDatabase::setDatabaseName()} + {database name}, the \l{QSqlDatabase::setHostName()} {host name}, + the \l{QSqlDatabase::setUserName()} {user name}, and the + \l{QSqlDatabase::setPassword()} {password}. In this case, we are + connecting to the MySQL database \c{flightdb} on the host + \c{bigblue}. The \c{"QMYSQL"} argument to + \l{QSqlDatabase::addDatabase()} {addDatabase()} specifies the type + of database driver to use for the connection. The set of database + drivers included with Qt are shown in the table of \l{SQL Database + Drivers#Supported Databases} {supported database drivers}. + + The connection in the snippet will be the \e{default} connection, + because we don't pass the second argument to + \l{QSqlDatabase::addDatabase()} {addDatabase()}, which is the + connection name. For example, here we establish two MySQL database + connections named \c{"first"} and \c{"second"}: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 27 + + After these connections have been initialized, \l{QSqlDatabase::} + {open()} for each one to establish the live connections. If the + \l{QSqlDatabase::} {open()} fails, it returns false. In that case, + call QSqlDatabase::lastError() to get error information. + + Once a connection is established, we can call the static function + QSqlDatabase::database() from anywhere with a connection name to + get a pointer to that database connection. If we don't pass a + connection name, it will return the default connection. For + example: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 28 + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 29 + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 30 + + To remove a database connection, first close the database using + QSqlDatabase::close(), then remove it using the static method + QSqlDatabase::removeDatabase(). +*/ + +/*! + \page sql-sqlstatements.html + \title Executing SQL Statements + + \previouspage Connecting to Databases + \contentspage SQL Programming + \nextpage Using the SQL Model Classes + + + The QSqlQuery class provides an interface for executing SQL + statements and navigating through the result set of a query. + + The QSqlQueryModel and QSqlTableModel classes described in the + next section provide a higher-level interface for accessing + databases. If you are unfamiliar with SQL, you might want to skip + directly to the next section (\l{Using the SQL Model Classes}). + + \section2 Executing a Query + + To execute an SQL statement, simply create a QSqlQuery object and + call QSqlQuery::exec() like this: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 31 + + The QSqlQuery constructor accepts an optional QSqlDatabase object + that specifies which database connection to use. In the example + above, we don't specify any connection, so the default connection + is used. + + If an error occurs, \l{QSqlQuery::exec()}{exec()} returns false. + The error is then available as QSqlQuery::lastError(). + + \section2 Navigating the Result Set + + QSqlQuery provides access to the result set one record at a time. + After the call to \l{QSqlQuery::exec()}{exec()}, QSqlQuery's + internal pointer is located one position \e{before} the first + record. We must call QSqlQuery::next() once to advance to the + first record, then \l{QSqlQuery::next()}{next()} again repeatedly + to access the other records, until it returns false. Here's a + typical loop that iterates over all the records in order: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 32 + + The QSqlQuery::value() function returns the value of a field in + the current record. Fields are specified as zero-based indexes. + QSqlQuery::value() returns a QVariant, a type that can hold + various C++ and core Qt data types such as \c int, QString, and + QByteArray. The different database types are automatically mapped + into the closest Qt equivalent. In the code snippet, we call + QVariant::toString() and QVariant::toInt() to convert + variants to QString and \c int. + + For an overview of the recommended types used with Qt supported + Databases, please refer to \l{Recommended Use of Data Types in Databases}{this table}. + + You can iterate back and forth using QSqlQuery::next(), + QSqlQuery::previous(), QSqlQuery::first(), QSqlQuery::last(), and + QSqlQuery::seek(). The current row index is returned by + QSqlQuery::at(), and the total number of rows in the result set + is avaliable as QSqlQuery::size() for databases that support it. + + To determine whether a database driver supports a given feature, + use QSqlDriver::hasFeature(). In the following example, we call + QSqlQuery::size() to determine the size of a result set of + the underlying database supports that feature; otherwise, we + navigate to the last record and use the query's position to tell + us how many records there are. + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 33 + + If you iterate through a result set only using next() and seek() + with positive values, you can call + QSqlQuery::setForwardOnly(true) before calling exec(). This is an + easy optimization that will speed up the query significantly when + operating on large result sets. + + \section2 Inserting, Updating, and Deleting Records + + QSqlQuery can execute arbitrary SQL statements, not just + \c{SELECT}s. The following example inserts a record into a table + using \c{INSERT}: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 34 + + If you want to insert many records at the same time, it is often + more efficient to separate the query from the actual values being + inserted. This can be done using placeholders. Qt supports two + placeholder syntaxes: named binding and positional binding. + Here's an example of named binding: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 35 + + Here's an example of positional binding: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 36 + + Both syntaxes work with all database drivers provided by Qt. If + the database supports the syntax natively, Qt simply forwards the + query to the DBMS; otherwise, Qt simulates the placeholder syntax + by preprocessing the query. The actual query that ends up being + executed by the DBMS is available as QSqlQuery::executedQuery(). + + When inserting multiple records, you only need to call + QSqlQuery::prepare() once. Then you call + \l{QSqlQuery::bindValue()}{bindValue()} or + \l{QSqlQuery::addBindValue()}{addBindValue()} followed by + \l{QSqlQuery::exec()}{exec()} as many times as necessary. + + Besides performance, one advantage of placeholders is that you + can easily specify arbitrary values without having to worry about + escaping special characters. + + Updating a record is similar to inserting it into a table: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 37 + + You can also use named or positional binding to associate + parameters to actual values. + + Finally, here's an example of a \c DELETE statement: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 38 + + \section2 Transactions + + If the underlying database engine supports transactions, + QSqlDriver::hasFeature(QSqlDriver::Transactions) will return + true. You can use QSqlDatabase::transaction() to initiate a + transaction, followed by the SQL commands you want to execute + within the context of the transaction, and then either + QSqlDatabase::commit() or QSqlDatabase::rollback(). When + using transactions you must start the transaction before you + create your query. + + Example: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 39 + + Transactions can be used to ensure that a complex operation is + atomic (for example, looking up a foreign key and creating a + record), or to provide a means of canceling a complex change in + the middle. + + \omit + It would be useful to mention transactions, and the fact that + some databases don't support them. + \endomit +*/ + +/*! + \page sql-model.html + \title Using the SQL Model Classes + + \previouspage Executing SQL Statements + \contentspage SQL Programming + \nextpage Presenting Data in a Table View + + In addition to QSqlQuery, Qt offers three higher-level classes + for accessing databases. These classes are QSqlQueryModel, + QSqlTableModel, and QSqlRelationalTableModel. + + \table + \row \o QSqlQueryModel + \o A read-only model based on an arbitrary SQL query. + \row \o QSqlTableModel + \o A read-write model that works on a single table. + \row \o QSqlRelationalTableModel + \o A QSqlTableModel subclass with foreign key support. + \endtable + + These classes derive from QAbstractTableModel (which in turn + inherits from QAbstractItemModel) and make it easy to present + data from a database in an item view class such as QListView and + QTableView. This is explained in detail in the \l{Presenting Data + in a Table View} section. + + Another advantage of using these classes is that it can make your + code easier to adapt to other data sources. For example, if you + use QSqlTableModel and later decide to use XML files to store + data instead of a database, it is essentially just a matter of + replacing one data model with another. + + \section2 The SQL Query Model + + QSqlQueryModel offers a read-only model based on an SQL query. + + Example: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 40 + + After setting the query using QSqlQueryModel::setQuery(), you can + use QSqlQueryModel::record(int) to access the individual records. + You can also use QSqlQueryModel::data() and any of the other + functions inherited from QAbstractItemModel. + + There's also a \l{QSqlQueryModel::setQuery()}{setQuery()} + overload that takes a QSqlQuery object and operates on its result + set. This enables you to use any features of QSqlQuery to set up + the query (e.g., prepared queries). + + \section2 The SQL Table Model + + QSqlTableModel offers a read-write model that works on a single + SQL table at a time. + + Example: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 41 + + QSqlTableModel is a high-level alternative to QSqlQuery for + navigating and modifying individual SQL tables. It typically + results in less code and requires no knowledge of SQL syntax. + + Use QSqlTableModel::record() to retrieve a row in the table, and + QSqlTableModel::setRecord() to modify the row. For example, the + following code will increase every employee's salary by 10 per + cent: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 42 + + You can also use QSqlTableModel::data() and + QSqlTableModel::setData(), which are inherited from + QAbstractItemModel, to access the data. For example, here's how + to update a record using + \l{QSqlTableModel::setData()}{setData()}: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 43 + + Here's how to insert a row and populate it: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 44 + + Here's how to delete five consecutive rows: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 45 + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 46 + + The first argument to QSqlTableModel::removeRows() is the index + of the first row to delete. + + When you're finished changing a record, you should always call + QSqlTableModel::submitAll() to ensure that the changes are + written to the database. + + When and whether you actually \e need to call submitAll() depends + on the table's \l{QSqlTableModel::editStrategy()}{edit strategy}. + The default strategy is QSqlTableModel::OnRowChange, which + specifies that pending changes are applied to the database when + the user selects a different row. Other strategies are + QSqlTableModel::OnManualSubmit (where all changes are cached in + the model until you call submitAll()) and + QSqlTableModel::OnFieldChange (where no changes are cached). + These are mostly useful when QSqlTableModel is used with a view. + + QSqlTableModel::OnFieldChange seems to deliver the promise that + you never need to call submitAll() explicitly. There are two + pitfalls, though: + + \list + \o Without any caching, performance may drop significantly. + \o If you modify a primary key, the record might slip through + your fingers while you are trying to populate it. + \endlist + + \section2 The SQL Relational Table Model + + QSqlRelationalTableModel extends QSqlTableModel to provide + support for foreign keys. A foreign key is a 1-to-1 mapping + between a field in one table and the primary key field of another + table. For example, if a \c book table has a field called \c + authorid that refers to the author table's \c id field, we say + that \c authorid is a foreign key. + + \table + \row \o \inlineimage noforeignkeys.png + \o \inlineimage foreignkeys.png + \endtable + + The screenshot on the left shows a plain QSqlTableModel in a + QTableView. Foreign keys (\c city and \c country) aren't resolved + to human-readable values. The screenshot on the right shows a + QSqlRelationalTableModel, with foreign keys resolved into + human-readable text strings. + + The following code snippet shows how the QSqlRelationalTableModel + was set up: + + \snippet examples/sql/relationaltablemodel/relationaltablemodel.cpp 0 + \codeline + \snippet examples/sql/relationaltablemodel/relationaltablemodel.cpp 1 + \snippet examples/sql/relationaltablemodel/relationaltablemodel.cpp 2 + + See the QSqlRelationalTableModel documentation for details. +*/ + +/*! + \page sql-presenting.html + \title Presenting Data in a Table View + + \previouspage Using the SQL Model Classes + \contentspage SQL Programming + \nextpage Creating Data-Aware Forms + + The QSqlQueryModel, QSqlTableModel, and QSqlRelationalTableModel + classes can be used as a data source for Qt's view classes such + as QListView, QTableView, and QTreeView. In practice, QTableView + is by far the most common choice, because an SQL result set is + essentially a two-dimensional data structure. + + \image relationaltable.png A table view displaying a QSqlTableModel + + The following example creates a view based on an SQL data model: + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 17 + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 18 + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 19 + + If the model is a read-write model (e.g., QSqlTableModel), the + view lets the user edit the fields. You can disable this by + calling + + \snippet doc/src/snippets/sqldatabase/sqldatabase.cpp 20 + + You can use the same model as a data source for multiple views. + If the user edits the model through one of the views, the other + views will reflect the changes immediately. The + \l{sql/tablemodel}{Table Model} example shows how it works. + + View classes display a header at the top to label the columns. To + change the header texts, call + \l{QAbstractItemModel::setHeaderData()}{setHeaderData()} on the + model. The header's labels default to the table's field names. + For example: + + \snippet examples/sql/relationaltablemodel/relationaltablemodel.cpp 3 + + QTableView also has a vertical header on the left with numbers + identifying the rows. If you insert rows programmatically using + QSqlTableModel::insertRows(), the new rows will be marked with an + asterisk (*) until they are submitted using + \l{QSqlTableModel::submitAll()}{submitAll()} or automatically + when the user moves to another record (assuming the + \l{QSqlTableModel::EditStrategy}{edit strategy} is + QSqlTableModel::OnRowChange). + + \image insertrowinmodelview.png Inserting a row in a model + + Likewise, if you remove rows using + \l{QSqlTableModel::removeRows()}{removeRows()}, the rows will be + marked with an exclamation mark (!) until the change is + submitted. + + The items in the view are rendered using a delegate. The default + delegate, QItemDelegate, handles the most common data types (\c + int, QString, QImage, etc.). The delegate is also responsible for + providing editor widgets (e.g., a combobox) when the user starts + editing an item in the view. You can create your own delegates by + subclassing QAbstractItemDelegate or QItemDelegate. See + \l{Model/View Programming} for more information. + + QSqlTableModel is optimized to operate on a single table at a + time. If you need a read-write model that operates on an + arbitrary result set, you can subclass QSqlQueryModel and + reimplement \l{QAbstractItemModel::flags()}{flags()} and + \l{QAbstractItemModel::setData()}{setData()} to make it + read-write. The following two functions make fields 1 and 2 of a + query model editable: + + \snippet examples/sql/querymodel/editablesqlmodel.cpp 0 + \codeline + \snippet examples/sql/querymodel/editablesqlmodel.cpp 1 + + The setFirstName() helper function is defined as follows: + + \snippet examples/sql/querymodel/editablesqlmodel.cpp 2 + + The setLastName() function is similar. See the + \l{sql/querymodel}{Query Model} example for the complete source code. + + Subclassing a model makes it possible to customize it in many + ways: You can provide tooltips for the items, change the + background color, provide calculated values, provide different + values for viewing and editing, handle null values specially, and + more. See \l{Model/View Programming} as well as the \l + QAbstractItemView reference documentation for details. + + If all you need is to resolve a foreign key to a more + human-friendly string, you can use QSqlRelationalTableModel. For + best results, you should also use QSqlRelationalDelegate, a + delegate that provides combobox editors for editing foreign keys. + + \image relationaltable.png Editing a foreign key in a relational table + + The \l{sql/relationaltablemodel}{Relational Table Model} example + illustrates how to use QSqlRelationalTableModel in conjunction with + QSqlRelationalDelegate to provide tables with foreign key + support. +*/ + +/*! + \page sql-forms.html + \title Creating Data-Aware Forms + + \previouspage Presenting Data in a Table View + \contentspage SQL Programming + + Using the SQL models described above, the contents of a database can + be presented to other model/view components. For some applications, + it is sufficient to present this data using a standard item view, + such as QTableView. However, users of record-based applications often + require a form-based user interface in which data from a specific + row or column in a database table is used to populate editor widgets + on a form. + + Such data-aware forms can be created with the QDataWidgetMapper class, + a generic model/view component that is used to map data from a model + to specific widgets in a user interface. + + QDataWidgetMapper operates on a specific database table, mapping items + in the table on a row-by-row or column-by-column basis. As a result, + using QDataWidgetMapper with a SQL model is as simple as using it with + any other table model. + + \image qdatawidgetmapper-simple.png + + The \l{demos/books}{Books} demonstration shows how information can + be presented for easy access by using QDataWidgetMapper and a set of + simple input widgets. +*/ |