diff options
Diffstat (limited to 'doc/src/styles.qdoc')
| -rw-r--r-- | doc/src/styles.qdoc | 2059 |
1 files changed, 0 insertions, 2059 deletions
diff --git a/doc/src/styles.qdoc b/doc/src/styles.qdoc deleted file mode 100644 index 1f1e325..0000000 --- a/doc/src/styles.qdoc +++ /dev/null @@ -1,2059 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the documentation of the Qt Toolkit. -** -** $QT_BEGIN_LICENSE:LGPL$ -** No Commercial Usage -** This file contains pre-release code and may not be distributed. -** You may use this file in accordance with the terms and conditions -** contained in the Technology Preview License Agreement accompanying -** this package. -** -** GNU Lesser General Public License Usage -** Alternatively, this file may be used under the terms of the GNU Lesser -** General Public License version 2.1 as published by the Free Software -** Foundation and appearing in the file LICENSE.LGPL included in the -** packaging of this file. Please review the following information to -** ensure the GNU Lesser General Public License version 2.1 requirements -** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain -** additional rights. These rights are described in the Nokia Qt LGPL -** Exception version 1.1, included in the file LGPL_EXCEPTION.txt in this -** package. -** -** If you have questions regarding the use of this file, please contact -** Nokia at qt-info@nokia.com. -** -** -** -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -/*! - \page style-reference.html - - \title Implementing Styles and Style Aware Widgets - \ingroup architecture - \brief An overview of styles and the styling of widgets. - - \tableofcontents - - \section1 Introduction - - Styles (classes that inherit QStyle) draw on behalf of widgets - and encapsulate the look and feel of a GUI. Several styles are - built into Qt (e.g., windows style and motif style). Other styles are - only available on specific platforms (such as the windows XP style). - Custom styles are made available as plugins or by creating an - instance of the style class in an application and setting it with - QApplication::setStyle(). - - To implement a new style, you inherit one of Qt's existing styles - - the one most resembling the style you want to create - and - reimplement a few virtual functions. This process is somewhat - involved, and we therefore provide this overview. We give a - step-by-step walkthrough of how to style individual Qt widgets. - We will examine the QStyle virtual functions, member variables, - and enumerations. - - The part of this document that does not concern the styling of - individual widgets is meant to be read sequentially because later - sections tend to depend on earlier ones. The description of the - widgets can be used for reference while implementing a style. - However, you may need to consult the Qt source code in some cases. - The sequence in the styling process should become clear after - reading this document, which will aid you in locating relevant code. - - To develop style aware widgets (i.e., widgets that conform to - the style in which they are drawn), you need to draw them using the - current style. This document shows how widgets draw themselves - and which possibilities the style gives them. - - \section1 The QStyle implementation - - The API of QStyle contains functions that draw the widgets, static - helper functions to do common and difficult tasks (e.g., - calculating the position of slider handles) and functions to do - the various calculations necessary while drawing (e.g., for the - widgets to calculate their size hints). The style also help some - widgets with the layout of their contents. In addition, it creates - a QPalette that contains \l{QBrush}es to draw with. - - QStyle draws graphical elements; an element is a widget or a - widget part like a push button bevel, a window frame, or a scroll - bar. When a widget asks a style to draw an element, it provides the - style with a style option, which is a class that contains the - information necessary for drawing. - - We will in the course of this section look at the style elements, - the style options, and the functions of QStyle. Finally, we describe - how the palette is used. - - Items in item views is drawn by \l{Delegate Classes}{delegates} in - Qt. The item view headers are still drawn by the style. Qt's - default delegate, QStyledItemDelegate, draws its items partially - through the current style; it draws the check box indicators and - calculate bounding rectangles for the elements of which the item - consists. In this document, we only describe how to implement a - QStyle subclass. If you wish to add support for other datatypes - than those supported by the QStyledItemDelegate, you need to - implement a custom delegate. Note that delegates must be set - programmatically for each individual widget (i.e., default - delegates cannot be provided as plugins). - - \section2 The Style Elements - - A style element is a graphical part of a GUI. A widget consists - of a hierarchy (or tree) of style elements. For instance, when a - style receives a request to draw a push button (from QPushButton, - for example), it draws a label (text and icon), a button bevel, - and a focus frame. The button bevel, in turn, consists of a frame - around the bevel and two other elements, which we will look at - later. Below is a conceptual illustration of the push button - element tree. We will see the actual tree for QPushButton when we - go through the individual widgets. - - \image javastyle/conceptualpushbuttontree.png - - Widgets are not necessarily drawn by asking the style to draw - only one element. Widgets can make several calls to the style to - draw different elements. An example is QTabWidget, which draws its - tabs and frame individually. - - There are three element types: primitive elements, control - elements, and complex control elements. The elements are defined - by the \l{QStyle::}{ComplexControl}, \l{QStyle::}{ControlElement}, - and \l{QStyle::}{PrimitiveElement} enums. The values of - each element enum has a prefix to identify their type: \c{CC_} for - complex elements, \c{CE_} for control elements, and \c{PE_} for - primitive elements. We will in the following three sections see what - defines the different elements and see examples of widgets that use - them. - - The QStyle class description contains a list of these elements and - their roles in styling widgets. We will see how they are used when - we style individual widgets. - - \section3 Primitive Elements - - Primitive elements are GUI elements that are common and often used - by several widgets. Examples of these are frames, button bevels, - and arrows for spin boxes, scroll bars, and combo boxes. - Primitive elements cannot exist on their own: they are always part - of a larger construct. They take no part in the interaction with - the user, but are passive decorations in the GUI. - - \section3 Control Elements - - A control element performs an action or displays information - to the user. Examples of control elements are push buttons, check - boxes, and header sections in tables and tree views. Control - elements are not necessarily complete widgets such as push - buttons, but can also be widget parts such as tab bar tabs and - scroll bar sliders. They differ from primitive elements in that - they are not passive, but fill a function in the interaction with - the user. Controls that consist of several elements often use the - style to calculate the bounding rectangles of the elements. The - available sub elements are defined by the \l{QStyle::}{SubElement} - enum. This enum is only used for calculating bounding rectangles, - and sub elements are as such not graphical elements to be drawn - like primitive, control, and complex elements. - - \section3 Complex Control Elements - - Complex control elements contain sub controls. Complex controls - behave differently depending on where the user handles them with - the mouse and which keyboard keys are pressed. This is dependent - on which sub control (if any) that the mouse is over or received a - mouse press. Examples of complex controls are scroll bars and - combo boxes. With a scroll bar, you can use the mouse to move the - slider and press the line up and line down buttons. The available - sub controls are defined by the \l{QStyle}{SubControl} enum. - - In addition to drawing, the style needs to provide the widgets - with information on which sub control (if any) a mouse press was - made on. For instance, a QScrollBar needs to know if the user - pressed the slider, the slider groove, or one of the buttons. - - Note that sub controls are not the same as the control elements - described in the previous section. You cannot use the style to - draw a sub control; the style will only calculate the bounding - rectangle in which the sub control should be drawn. It is common, - though, that complex elements use control and primitive elements - to draw their sub controls, which is an approach that is - frequently used by the built-in styles in Qt and also the Java - style. For instance, the Java style uses PE_IndicatorCheckBox to - draw the check box in group boxes (which is a sub control of - CC_GroupBox). Some sub controls have an equivalent control element, - e.g., the scroll bar slider (SC_SCrollBarSlider and - CE_ScrollBarSlider). - - \section3 Other QStyle Tasks - - The style elements and widgets, as mentioned, use the style to - calculate bounding rectangles of sub elements and sub controls, - and pixel metrics, which is a style dependent size in screen - pixels, for measures when drawing. The available rectangles and - pixel metrics are represented by three enums in QStyle: - \l{QStyle::}{SubElement}, \l{QStyle::}{SubControl}, and - \l{QStyle::}{PixelMetric}. Values of the enums can easily by - identified as they start with SE_, SC_ and PM_. - - The style also contain a set of style hints, which is - represented as values in the \l{QStyle::}{StyleHint} enum. All - widgets do not have the same functionality and look in the - different styles. For instance, when the menu items in a menu do not - fit in a single column on the screen, some styles support - scrolling while others draw more than one column to fit all items. - - A style usually has a set of standard images (such as a warning, a - question, and an error image) for message boxes, file dialogs, - etc. QStyle provides the \l{QStyle::}{StandardPixmap} enum. Its - values represent the standard images. Qt's widgets use these, so - when you implement a custom style you should supply the images - used by the style that is being implemented. - - The style calculates the spacing between widgets in layouts. There - are two ways the style can handle these calculations. You can set - the PM_LayoutHorizontalSpacing and PM_LayoutVerticalSpacing, which - is the way the java style does it (through QCommonStyle). - Alternatively, you can implement QStyle::layoutSpacing() and - QStyle::layoutSpacingImplementation() if you need more control over - this part of the layout. In these functions you can calculate the - spacing based on control types (QSizePolicy::ControlType) for - different size policies (QSizePolicy::Policy) and also the style - option for the widget in question. - - \section2 Style Options - - A style option (a class that inherit QStyleOption) stores - parameters used by QStyle functions. The sub-classes of - QStyleOption contain all information necessary to style the - individual widgets. The style options keep public variables for - performance reasons. Style options are filled out by the widgets. - - The widgets can be in a number of different states, which are - defined by the \l{QStyle::}{State} enum. Some of the state flags have - different meanings depending on the widget, but others are common - for all widgets like State_Disabled. It is QStyleOption that sets - the common states with QStyleOption::init(); the rest of the - states are set by the individual widgets. - - Most notably, the style options contain the palette and bounding - rectangles of the widgets to be drawn. Most widgets have - specialized style options. QPushButton and QCheckBox, for - instance, use QStyleOptionButton as style option, which contain - the text, icon, and the size of their icon. The exact contents of - all options are described when we go through individual widgets. - - \section2 QStyle Functions - - The QStyle class defines three functions for drawing the primitive, - control, and complex elements: - \l{QStyle::}{drawPrimitive()}, - \l{QStyle::}{drawControl()}, and - \l{QStyle::}{drawComplexControl()}. The functions takes the - following parameters: - - \list - \o the enum value of the element to draw - \o a QStyleOption which contains the information needed to - draw the element. - \o a QPainter with which to draw the element. - \o a pointer to a QWidget, typically the widget - that the element is painted on. - \endlist - - Not all widgets send a pointer to themselves. If the style - option sent to the function does not contain the information you - need, you should check the widget implementation to see if it - sends a pointer to itself. - - The QStyle class also provides helper functions that are used - when drawing the elements. The \l{QStyle::}{drawItemText()} - function draws text within a specified rectangle and taking a - QPalette as a parameter. The \l{QStyle::}{drawItemPixmap()} - function helps to align a pixmap within a specified bounding - rectangle. - - Other QStyle functions do various calculations for the - functions that draw. The widgets also use these functions for - calculating size hints and also for bounding rectangle - calculations if they draw several style elements themselves. - As with the functions that draw elements the helper functions - typically takes the same arguments. - - \list - \o The \l{QStyle::}{subElementRect()} function takes a - \l{QStyle::}{SubElement} enum value, and calculates a bounding - rectangle for a sub element. The style uses this function to - know where to draw the different parts of an element. This is - mainly done for reuse. If you create a new style, you can use - the same location of sub elements as the super class. - - \o The \l{QStyle::}{subControlRect()} function is used to - calculate bounding rectangles for sub controls in complex - controls. When you implement a new style, you reimplement \c - subControlRect() and calculate the rectangles that are different - from the super class. - - \o The \l{QStyle::}{pixelMetric()} function returns a pixel - metric, which is a style dependent size given in screen - pixels. It takes a value of the \l{QStyle::}{PixelMetric} enum - and returns the correct measure. Note that pixel metrics do - not necessarily have to be static measures, but can be - calculated with, for example, the style option. - - \o The \l{QStyle::}{hitTestComplexControl()} function returns the - sub control that the mouse pointer is over in a complex control. - Usually, this is simply a matter of using - \l{QStyle::}{subControlRect()} to get the bounding rectangles of - the sub controls, and see which rectangle contains the position of - the cursor. - \endlist - - QStyle also have the functions \l{QStyle::}{polish()} and - \l{QStyle::}{unpolish()}. All widgets are sent to the \c polish() - function before being shown and to \c unpolish() when they - are hidden. You can use these functions to set attributes on the - widgets or do other work that is required by your style. For - instance, if you need to know when the mouse is hovering over the - widget, you need to set the \l{Qt::}{WA_Hover} widget attribute. - The State_MouseOver state flag will then be set in the widget's - style options. - - QStyle has a few static helper functions that do some common and - difficult tasks. They can calculate the position of a slider - handle from the value of the slider and transform rectangles - and draw text considering reverse layouts; see the QStyle - class documentation for more details. - - The usual approach when one reimplements QStyle virtual - functions is to do work on elements that are different from the - super class; for all other elements, you can simply use the super - class implementation. - - \section2 The Palette - - Each style provides a color - that is, QBrush - palette that - should be used for drawing the widgets. There is one set of colors - for the different widget states (QPalette::ColorGroup): active - (widgets in the window that has keyboard focus), inactive (widgets - used for other windows), and disabled (widgets that are set - disabled). The states can be found by querying the State_Active - and State_Enabled state flags. Each set contains color certain - roles given by the QPalette::ColorRole enum. The roles describe in - which situations the colors should be used (e.g., for painting - widget backgrounds, text, or buttons). - - How the color roles are used is up to the style. For instance, if - the style uses gradients, one can use a palette color and make it - darker or lighter with QColor::darker() and QColor::lighter() to - create the gradient. In general, if you need a brush that is not - provided by the palette, you should try to derive it from one. - - QPalette, which provides the palette, stores colors for - different widget states and color roles. The palette for a style - is returned by \l{QStyle::}{standardPalette()}. The standard - palette is not installed automatically when a new style is set - on the application (QApplication::setStyle()) or widget - (QWidget::setStyle()), so you must set the palette yourself - with (QApplication::setPalette()) or (QWidget::setPalette()). - - It is not recommended to hard code colors as applications and - individual widgets can set their own palette and also use the - styles palette for drawing. Note that none of Qt's widgets set - their own palette. The java style does hard code some colors, but - its author looks past this in silence. Of course, it is not - intended that the style should look good with any palette. - - \section2 Implementation Issues - - When you implement styles, there are several issues to - consider. We will give some hints and advice on implementation - here. - - When implementing styles, it is necessary to look through the - code of the widgets and code of the base class and its ancestors. - This is because the widgets use the style differently, because the - implementation in the different styles virtual functions can - affect the state of the drawing (e.g., by altering the QPainter - state without restoring it and drawing some elements without using - the appropriate pixel metrics and sub elements). - - It is recommended that the styles do not alter the proposed size - of widgets with the QStyle::sizeFromContents() function but let - the QCommonStyle implementation handle it. If changes need to be - made, you should try to keep them small; application development - may be difficult if the layout of widgets looks considerably - different in the various styles. - - We recommend using the QPainter directly for drawing, i.e., not - use pixmaps or images. This makes it easier for the style conform - to the palette (although you can set your own color table on a - QImage with \l{QImage::}{setColorTable()}). - - It is, naturally, possible to draw elements without using the - style to draw the sub elements as intended by Qt. This is - discouraged as custom widgets may depend on these sub elements to - be implemented correctly. The widget walkthrough shows how Qt - uses the sub elements. - - \section1 Java Style - - We have implemented a style that resembles the Java default look - and feel (previously known as Metal). We have done this as it is - relatively simple to implement and we wanted to build a style for - this overview document. To keep it simple and not to extensive, we - have simplified the style somewhat, but Qt is perfectly able to - make an exact copy of the style. However, there are no concrete - plans to implement the style as a part of Qt. - - In this section we will have a look at some implementation - issues. Finally, we will see a complete example on the styling of - a Java widget. We will continue to use the java style - throughout the document for examples and widget images. The - implementation itself is somewhat involved, and it is not - intended that you should read through it. - - \section2 Design and Implementation - - The first step in designing the style was to select the base - class. We chose to subclass QWindowsStyle. This class implements - most of the functionality we need other than performing the actual - drawing. Also, windows and java share layout of sub controls for - several of the complex controls (which reduces the amount of code - required considerably). - - The style is implemented in one class. We have done this - because we find it convenient to keep all code in one file. Also, - it is an advantage with regards to optimization as we instantiate - less objects. We also keep the number of functions at a minimum by - using switches to identify which element to draw in the functions. - This results in large functions, but since we divide the code for - each element in the switches, the code should still be easy to - read. - - \section2 Limitations and Differences from Java - - We have not fully implemented every element in the Java style. - This way, we have reduced the amount and complexity of the code. - In general, the style was intended as a practical example for - this style overview document, and not to be a part of Qt - itself. - - Not all widgets have every state implemented. This goes for - states that are common, e.g., State_Disabled. Each state is, - however, implemented for at least one widget. - - We have only implemented ticks below the slider. Flat push - buttons are also left out. We do not handle the case where the - title bars and dock window titles grows to small for their - contents, but simply draw sub controls over each other. - - We have not tried to emulate the Java fonts. Java and Qt use very - different font engines, so we don't consider it worth the effort - as we only use the style as an example for this overview. - - We have hardcoded the colors (we don't use the QPalette) for - the linear gradients, which are used, for example, for button - bevels, tool bars, and check boxes. This is because the Java - palette cannot produce these colors. Java does not change these - colors based on widget color group or role anyway (they are not - dependent on the palette), so it does not present a problem in any - case. - - It is Qt's widgets that are styled. Some widgets do not exist - at all in Java, e.g., QToolBox. Others contain elements that the - Java widgets don't. The tree widget is an example of the latter in - which Java's JTree does not have a header. - - The style does not handle reverse layouts. We assume that the - layout direction is left to right. QWindowsStyle handles reverse - widgets; if we implemented reverse layouts, widgets that we change - the position of sub elements, or handle text alignment in labels - our selves would need to be updated. - - \section2 Styling Java Check Boxes - - As an example, we will examine the styling of check boxes in the - java style. We describe the complete process and print all code in - both the java style and Qt classes involved. In the rest of this - document, we will not examine the source code of the individual - widgets. Hopefully, this will give you an idea on how to search - through the code if you need to check specific implementation - details; most widgets follow the same structure as the check - boxes. We have edited the QCommonStyle code somewhat to remove - code that is not directly relevant for check box styling. - - We start with a look at how QCheckBox builds it style option, - which is QStyleOptionButton for checkboxes: - - \snippet doc/src/snippets/code/doc_src_styles.qdoc 0 - - First we let QStyleOption set up the option with the information - that is common for all widgets with \c init(). We will look at - this shortly. - - The down boolean is true when the user press the box down; this is - true whether the box is checked or not of the checkbox. The - State_NoChange state is set when we have a tristate checkbox and - it is partially checked. It has State_On if the box is checked and - State_Off if it is unchecked. State_MouseOver is set if the mouse - hovers over the checkbox and the widget has attribute Qt::WA_Hover - set - you set this in QStyle::polish(). In addition, the style - option also contains the text, icon, and icon size of the button. - - \l{QStyleOption::}{init()} sets up the style option with the - attributes that are common for all widgets. We print its - implementation here: - - \snippet doc/src/snippets/code/doc_src_styles.qdoc 1 - - The State_Enabled is set when the widget is enabled. When the - widget has focus the State_HasFocus flag is set. Equally, the - State_Active flag is set when the widget is a child of the active - window. The State_MouseOver will only be set if the widget has - the WA_HoverEnabled windows flag set. Notice that keypad - navigation must be enabled in Qt for the State_HasEditFocus to - be included; it is not included by default. - - In addition to setting state flags the QStyleOption contains - other information about the widget: \c direction is the layout - direction of the layout, \c rect is the bounding rectangle of the - widget (the area in which to draw), \c palette is the QPalette - that should be used for drawing the widget, and \c fontMetrics is - the metrics of the font that is used by the widget. - - We give an image of a checkbox and the style option to match - it. - - \image javastyle/checkboxexample.png A java style checkbox - - The above checkbox will have the following state flags in its - style option: - - \table 90% - \header - \o State flag - \o Set - \row - \o State_Sunken - \o Yes - \row - \o State_NoChange - \o No - \row - \o State_On - \o Yes - \row - \o State_Off - \o No - \row - \o State_MouseOver - \o Yes - \row - \o State_Enabled - \o Yes - \row - \o State_HasFocus - \o Yes - \row - \o State_KeyboardFocusChange - \o No - \row - \o State_Active - \o Yes - \endtable - - The QCheckBox paints itself in QWidget::paintEvent() with - style option \c opt and QStylePainter \c p. The QStylePainter - class is a convenience class to draw style elements. Most - notably, it wraps the methods in QStyle used for painting. The - QCheckBox draws itself as follows: - - \snippet doc/src/snippets/code/doc_src_styles.qdoc 2 - - QCommonStyle handles the CE_CheckBox element. The QCheckBox - has two sub elements: SE_CheckBoxIndicator (the checked indicator) - and SE_CheckBoxContents (the contents, which is used for the - checkbox label). QCommonStyle also implements these sub element - bounding rectangles. We have a look at the QCommonStyle code: - - \snippet doc/src/snippets/code/doc_src_styles.qdoc 3 - - As can be seen from the code extract, the common style gets - the bounding rectangles of the two sub elements of - CE_CheckBox, and then draws them. If the checkbox has focus, - the focus frame is also drawn. - - The java style draws CE_CheckBoxIndicator, while QCommonStyle - handles CE_CheckboxLabel. We will examine each implementation and - start with CE_CheckBoxLabel: - - \snippet doc/src/snippets/code/doc_src_styles.qdoc 4 - - \l{QStyle::}{visualAlignment()} adjusts the alignment of text - according to the layout direction. We then draw an icon if it - exists, and adjust the space left for the text. - \l{QStyle::}{drawItemText()} draws the text taking alignment, - layout direction, and the mnemonic into account. It also uses the - palette to draw the text in the right color. - - The drawing of labels often get somewhat involved. Luckily, it - can usually be handled by the base class. The java style - implements its own push button label since Java-contrary to - windows-center button contents also when the button has an icon. - You can examine that implementation if you need an example of - reimplementing label drawing. - - We take a look at the java implementation - of CE_CheckBoxIndicator in \c drawControl(): - - \snippet doc/src/snippets/javastyle.cpp 0 - - We first save the state of the painter. This is not always - necessary but in this case the QWindowsStyle needs the painter in - the same state as it was when PE_IndicatorCheckBox was called (We - could also set the state with function calls, of course). We then - use \c drawButtonBackground() to draw the background of the check - box indicator. This is a helper function that draws the background - and also the frame of push buttons and check boxes. We take a look - at that function below. We then check if the mouse is hovering - over the checkbox. If it is, we draw the frame java checkboxes - have when the box is not pressed down and the mouse is over it. - You may note that java does not handle tristate boxes, so we have - not implemented it. - - Here we use a png image for our indicator. We could also check - here if the widget is disabled. We would then have to use - another image with the indicator in the disabled color. - - \snippet doc/src/snippets/javastyle.cpp 1 - - We have seen how check boxes are styled in the java style from the - widget gets a paint request to the style is finished painting. To - learn in detail how each widget is painted, you need to go through - the code step-by-step as we have done here. However, it is - usually enough to know which style elements the widgets draw. The - widget builds a style option and calls on the style one or more - times to draw the style elements of which it consists. Usually, - it is also sufficient to know the states a widget can be in and the - other contents of the style option, i.e., what we list in the next - section. - - \section1 Widget Walkthrough - - In this section, we will examine how most of Qt's widgets are - styled. Hopefully, this will save you some time and effort while - developing your own styles and widgets. You will not find - information here that is not attainable elsewhere (i.e., by - examining the source code or the class descriptions for the style - related classes). - - We mostly use java style widgets as examples. The java style does not - draw every element in the element trees. This is because they are - not visible for that widget in the java style. We still make sure - that all elements are implemented in a way that conforms with the - java style as custom widgets might need them (this does not - exclude leaving implementations to QWindowsStyle though). - - The following is given for each widget: - - \list - \o A table with the members (variables, etc.) of its style option. - \o A table over the state flags (QStyle::StateFlag) that - can be set on the widget and when the states are set. - \o Its element tree (see section \l{The Style Elements}). - \o An image of the widget in which the elements are outlined. - \omit This is not written yet - probably never will be - either - \o List of style hints that should be checked for the - widget. - \o List of standard pixmaps that could be used by the - elements. - \endomit - \endlist - - The element tree contains the primitive, control, and complex - style elements. By doing a top-down traversal of the element tree, - you get the sequence in which the elements should be drawn. In the - nodes, we have written the sub element rectangles, sub control - elements, and pixel metrics that should be considered when drawing - the element of the node. - - Our approach on styling center on the drawing of the widgets. The - calculations of sub elements rectangles, sub controls, and pixel - metrics used \bold during drawing is only listed as contents in - the element trees. Note that there are rectangles and pixel - metrics that are only used by widgets. This leaves these - calculations untreated in the walkthrough. For instance, the - \l{QStyle::}{subControlRect()} and - \l{QStyle::}{sizeFromContents()} functions often call - \l{QStyle::}{subElementRect()} to calculate their bounding - rectangles. We could draw trees for this as well. However, how - these calculations are done is completely up to the individual - styles, and they do not have to follow a specific structure (Qt - does not impose a specific structure). You should still make sure - that you use the appropriate pixel metrics, though. To limit the - size of the document, we have therefore chosen not to include - trees or describe the calculations made by the Java (or any other) - style. - - You may be confused about how the different pixel metrics, sub - element rectangles, and sub control rectangles should be used when - examining the trees. If you are in doubt after reading the QStyle - enum descriptions, we suggest that you examine the QCommonStyle - and QWindowsStyle implementations. - - Some of the bounding rectangles that we outline in the widget - images are equal. Reasons for this are that some elements draw - backgrounds while others draw frames and labels. If in doubt, - check the description of each element in QStyle. Also, some - elements are there to layout, i.e., decide where to draw, other - elements. - - \section2 Common Widget Properties - - Some states and variables are common for all widgets. These are - set with QStyleOption::init(). Not all elements use this function; - it is the widgets that create the style options, and for some - elements the information from \l{QStyleOption::}{init()} is not - necessary. - - A table with the common states follows: - - \table 90% - \header - \o State - \o State Set When - \row - \o State_Enabled - \o Set if the widget is not disabled (see - QWidget::setEnabled()) - \row - \o State_Focus - \o Set if the widget has focus (see - QWidget::hasFocus()) - \row - \o State_KeyobordFocusChange - \o Set when the user changes focus with the keyboard - (see Qt::WA_KeyboardFocusChange) - \row - \o State_MouseOver - \o Set if the mouse cursor is over the widget - \row - \o State_Active - \o Set if the widget is a child of the active window. - \row - \o State_HasEditFocus - \o Set if the widget has the edit focus - \endtable - - The other common members for widgets are: - - \table 90% - \header - \o Member - \o Content - \row - \o rect - \o The bounding rectangle of the element to draw. This - is set to the widget bounding rectangle - (QWidget::rect()). - \row - \o direction - \o The layout direction; a value of the - Qt::LayoutDirection enum. - \row - \o palette - \o The QPalette to use when drawing the element. This - is set to the widgets palette (QWidget::palette()). - \row - \o fontMetrics - \o The QFontMetrics to use when drawing text on the - widget. - \endtable - - The complex style options (classes that inherit - QStyleOptionComplex) used for complex style elements share two - variables: \l{QStyleOptionComplex::}{subControls} and - \l{QStyleOptionComplex::}{activeSubControls}. Both variables are - an OR'ed combination of QStyle::SubControl enum values. They - indicate which sub controls the complex control consists of and - which of these controls are currently active. - - As mentioned, the style calculates the size of the widgets - contents, which the widgets calculate their size hints from. In - addition, complex controls also use the style to test which - sub-controls the mouse is over. - - \section2 Widget Reference - - Without further delay, we present the widget walkthrough; each - widget has its own sub-section. - - \section3 Push Buttons - - The style structure for push buttons is shown below. By doing a - top-down traversal of the tree, you get the sequence in which the - elements should be drawn. - - \image javastyle/pushbutton.png The style structure for push buttons - - The layout of the buttons, with regard element bounds, varies from - style to style. This makes it difficult to show conceptual images - of this. Also, elements may - even be intended to - have the same - bounds; the PE_PushButtonBevel, for instance, is used in - QCommonStyle to draw the elements that contains it: - PE_FrameDefaultButton, PE_FrameButtonBevel, and - PE_PanelButtonCommand, all of which have the same bounds in common - and windows style. PE_PushButtonBevel is also responsible for - drawing the menu indicator (QCommonStyle draws - PE_IndicatorArrowDown). - - An image of a push button in the java style that show the bounding - rectangles of the elements is given below. Colors are used to - separate the bounding rectangles in the image; they do not fill - any other purpose. This is also true for similar images for the - other widgets. - - \image javastyle/button.png - - The java style, as well as all other styles implemented in Qt, - does not use PE_FrameButtonBevel. It is usual that a button - with a PE_DefaultFrame adjusts the PE_PanelButtonCommand's - rectangle by PM_ButtonDefaultIndicator. The CE_PushButtonLabel - is found by adjusting the rect by PM_DefaultFrameWidth. - - We will now examine the style option for push - buttons - QStyleOptionButton. A table for the states that - QPushButton can set on the style option follows: - - \table 90% - \header - \o State - \o State Set When - \row - \o State_Sunken - \o Button is down or menu is pressed shown - \row - \o State_On - \o Button is checked - \row - \o State_Raised - \o Button is not flat and not pressed down - \endtable - - Other members of QStyleOptionButton is: - - \table 90% - \header - \o Member - \o Content - \row - \o features - \o Flags of the QStyleOptionButton::ButtonFeatures enum, - which describes various button properties (see enum) - \row - \o icon - \o The buttons QIcon (if any) - \row - \o iconSize - \o The QSize of the icon - \row - \o text - \o a QString with the buttons text - \endtable - - \section3 Check and Radio Buttons - - The structures for radio and check buttons are identical. - We show the structure using QCheckBox element and pixel - metric names: - - \image javastyle/checkbox.png - - QStyleOptionButton is used as the style option for both check - and radio buttons. We first give a table of the states that - can be set in the option: - - \table 90% - \header - \o State - \o State Set When - \row - \o State_sunken - \o The box is pressed down - \row - \o State_NoChange - \o The box is partially checked (for tristate - checkboxes.) - \row - \o State_On - \o The box is checked - \row - \o State_Off - \o The box is unchecked - \endtable - - See \l{Push Buttons} for a table over other members in the - QStyleOptionButtonClass. - - \section3 Tabs - - In Qt, QTabBar uses the style to draw its tabs. Tabs exist either - in a QTabWidget, which contains a QTabBar, or as a separate bar. - If the bar is not part of a tab widget, it draws its own base. - - QTabBar lays out the tabs, so the style does not have control over - tab placement. However, while laying out its tabs, the bar asks - the style for PM_TabBarTabHSpace and PM_TabBarTabVSpace, which is - extra width and height over the minimum size of the tab bar tab - label (icon and text). The style can also further influence the - tab size before it is laid out, as the tab bar asks for - CT_TabBarTab. The bounding rectangle of the bar is decided by the - tab widget when it is part of the widget (still considering - CT_TabBarTab). - - The tab bar is responsible for drawing the buttons that appear on - the tab bar when all tabs do not fit. Their placement is not - controlled by the style, but the buttons are \l{QToolButton}s - and are therefore drawn by the style. - - Here is the style structure for QTabWidget and QTabBar: - - \image javastyle/tab.png - - The dotted lines indicate that the QTabWidget contains a tab bar, - but does not draw it itself, that QTabBar only draws its base line - when not part of a tab widget, and that the tab bar keeps two tool - buttons that scroll the bar when all tabs do not fit; see \l{Tool - Buttons} for their element tree. Also note that since the buttons - are children of the tab bar, they are drawn after the bar. The - tabs bounding rectangles overlap the base by PM_TabBarBaseOverlap. - - Here is a tab widget in the java style: - - \image javastyle/tabwidget.png - - In the java style (and also windows), the tab bar shape and label - have the same bounding rectangle as CE_TabBarTab. Notice that the - tabs overlap with the tab widget frame. The base of the tab bar - (if drawn) is the area where the tabs and frame overlap. - - The style option for tabs (QStyleOptionTab) contains the necessary - information for drawing tabs. The option contains the position of - the tab in the tab bar, the position of the selected tab, the - shape of the tab, the text, and icon. After Qt 4.1 the option - should be cast to a QStyleOptionTabV2, which also contains the - icons size. - - As the java style tabs don't overlap, we also present an image of - a tab widget in the windows style. Note that if you want the tabs - to overlap horizontally, you do that when drawing the tabs in - CE_TabBarTabShape; the tabs bounding rectangles will not be - altered by the tab bar. The tabs are drawn from left to right in a - north tab bar shape, top to bottom in an east tab bar shape, etc. - The selected tab is drawn last, so that it is easy to draw it over - the other tabs (if it is to be bigger). - - \image javastyle/windowstabimage.png - - A table of the states a tab bar can set on its tabs follows: - - \table 90% - \header - \o State - \o State Set When - \row - \o State_Sunken - \o The tab is pressed on with the mouse. - \row - \o State_Selected - \o If it is the current tab. - \row - \o State_HasFocus - \o The tab bar has focus and the tab is selected - \endtable - - Note that individual tabs may be disabled even if the tab bar - is not. The tab will be active if the tab bar is active. - - Here follows a table of QStyleOptionTabV2's members: - - \table 90% - \header - \o Member - \o Content - \row - \o cornerWidgets - \o Is flags of the CornerWidget enum, which indicate - if and which corner widgets the tab bar has. - \row - \o icon - \o The QIcon of the tab - \row - \o iconSize - \o The QSize of the icon - \row - \o position - \o A TabPosition enum value that indicates the tabs - position on the bar relative to the other tabs. - \row - \o row - \o holds which row the tab is in - \row - \o selectedPosition - \o A value of the SelectedPosition enum that indicates - whether the selected tab is adjacent to or is the - tab. - \row - \o shape - \o A value of the QTabBar::Shape enum indication - whether the tab has rounded or triangular corners - and the orientation of the tab. - \row - \o text - \o The tab text - \endtable - - The frame for tab widgets use QStyleOptionTabWidgetFrame as - style option. We list its members here. It does not have - states set besides the common flags. - - \table 90% - \header - \o Member - \o content - \row - \o leftCornerWidgetSize - \o The QSize of the left corner widget (if any). - \row - \o rightCornerWidgetSize - \o The QSize of the right corner widget (if any). - \row - \o lineWidth - \o holds the line with for drawing the panel. - \row - \o midLineWith - \o this value is currently always 0. - \row - \o shape - \o The shape of the tabs on the tab bar. - \row - \o tabBarSize - \o The QSize of the tab bar. - \endtable - - \section3 Scroll Bars - - Here is the style structure for scrollBars: - - \image javastyle/scrollbar.png - - QScrollBar simply creates its style option and then draws - CC_ScrollBar. Some styles draw the background of add page and sub - page with PE_PanelButtonBevel and also use indicator arrows to - draw the arrows in the nest and previous line indicators; we have - not included these in the tree as their use is up to the - individual style. The style's PM_MaximumDragDistance is the - maximum distance in pixels the mouse can move from the bounds - of the scroll bar and still move the handle. - - Here is an image of a scrollbar in the java style: - - \image javastyle/scrollbarimage.png - - You may notice that the scrollbar is slightly different from - Java's as it has two line up indicators. We have done this to show - how that you can have two separate bounding rectangles for a - single sub control. The scroll bar is an example of a widget that - is entirely implemented by the java style - neither QWindowsStyle - nor QCommonStyle are involved in the drawing. - - We have a look at the different states a scroll bar can set on - the style option: - - \table 90% - \header - \o State - \o State Set When - \row - \o State_Horizontal - \o The scroll bar is horizontal - \endtable - - The style option of QScrollBar is QStyleOptionSlider. Its - members are listed in the following table. The option is used - by all \l{QAbstractSlider}s; we only describe the members - relevant for scroll bars here. - - \table 90% - \header - \o Member - \o Content - \row - \o maximum - \o the maximum value of the scroll bar - \row - \o minimum - \o the minimum value of the scroll bar - \row - \o notchTarget - \o the number of pixels between notches - \row - \o orientation - \o a value of the Qt::Orientation enum that specifies - whether the scroll bar is vertical or horizontal - \row - \o pageStep - \o the number to increase or decrease the sliders - value (relative to the size of the slider and its value - range) on page steps. - \row - \o singleStep - \o the number to increase or decrease the sliders - value on single (or line) steps - \row - \o sliderValue - \o The value of the slider - \row - \o sliderPosition - \o the position of the slider handle. This is the same - as \c sliderValue if the scroll bar is - QAbstractSlider::tracking. If not, the scroll - bar does not update its value before the mouse - releases the handle. - \row - \o upsideDown - \o holds the direction in which the scroll bar - increases its value. This is used instead of - QStyleOption::direction for all abstract sliders. - \endtable - - \section3 Sliders - - When calculating the sliders size hint, PM_SliderTickness and - PM_SliderLength is queried from the style. As with scroll bars, - the QSlider only lets the user move the handle if the mouse is - within PM_MaximumDragDistance from the slider bounds. When it - draws itself it creates the style option and calls \c - drawComplexControl() with CC_Slider: - - \image javastyle/slider.png - - We also show a picture of a slider in the java style. We show - the bounding rectangles of the sub elements as all drawing is done - in CC_Slider. - - \image javastyle/sliderimage.png - - QSlider uses QStyleOptionSlider as all \l{QAbstractSlider}s do. We - present a table with the members that affect QSlider: - - \table 90% - \header - \o Member - \o Content - \row - \o maximum - \o the maximum value of the slider - \row - \o minimum - \o the minimum value of the slider - \row - \o notchTarget - \o this is the number of pixels between each notch - \row - \o orientation - \o a Qt::Orientation enum value that gives whether the - slider is vertical or horizontal. - \row - \o pageStep - \o a number in slider value to increase or decrease - for page steps - \row - \o singleStep - \o the number to increase or decrease the sliders - value on single (or line) steps. - \row - \o sliderValue - \o the value of the slider. - \row - \o sliderPosition - \o the position of the slider given as a slider value. - This will be equal to the \c sliderValue if the - slider is \l{QAbstractSlider::}{tracking}; if - not, the sliders value will not change until the handle is - released with the mouse. - \row - \o upsideDown - \o this member is used instead of QStyleOption::direction - for all abstract sliders. - \endtable - - You should note that the slider does not use direction for - reverse layouts; it uses \c upsideDown. - - \section3 Spin Boxes - - When QSpinBox paints itself it creates a QStyleOptionSpinBox and - asks the style to draw CC_SpinBox. The edit field is a line - edit that is a child of the spin box. The dimensions of the - field is calculated by the style with SC_SpinBoxEditField. - - Here follows the style tree for spin boxes. It is not - required that a style uses the button panel primitive to paint - the indicator backgrounds. You can see an image below the tree - showing the sub elements in QSpinBox in the java style. - - \image javastyle/spinbox.png - - \image javastyle/spinboximage.png - - The QStyleOptionSpinBox, which is the style option for spin - boxes. It can set the following states on the spin box.: - - \table 90% - \header - \o State - \o State Set When - \row - \o State_Sunken - \o Is set if one of the sub controls CC_SpinUp or - CC_SpinDown is pressed on with the mouse. - \endtable - - The rest of the members in the spin boxes style options are: - - \table 90% - \header - \o Property - \o Function - \row - \o frame - \o boolean that is true if the spin box is to draw a - frame. - \row - \o buttonSymbols - \o Value of the ButtonSymbols enum that decides the - symbol on the up/down buttons. - \row - \o stepEnabled - \o A value of the StepEnabled indication which of the - spin box buttons are pressed down. - \endtable - - \section3 Title Bar - - The title bar complex control, CC_TitleBar, is used to draw - the title bars of internal windows in QMdiArea. It typically - consists of a window title and close, minimize, system menu, and - maximize buttons. Some styles also provide buttons for shading - the window, and a button for context sensitive help. - - The bar is drawn in CC_TitleBar without using any sub elements. - How the individual styles draw their buttons is individual, but - there are standard pixmaps for the buttons that the style should - provide. - - \image javastyle/titlebar.png - - In an image over a title bar in the java style, we show the - bounding rectangles of the sub elements supported by the java style - (all of which are drawn with standard pixmaps). It is usual to - draw the button backgrounds using PE_PanelButtonTool, but it's no - rule. - - \image javastyle/titlebarimage.png - - The style option for title bars is QStyleOptionTitleBar. It's - members are: - - \table 90% - \header - \o Member - \o Content - \row - \o icon - \o The title bars icon - \row - \o text - \o the text for the title bar's label - \row - \o windowFlags - \o flags of the Qt::WindowFlag enum. The window flags - used by QMdiArea for window management. - \row - \o titleBarState - \o this is the QWidget::windowState() of the window - that contains the title bar. - \endtable - - \section3 Combo Box - - A QComboBox uses the style to draw the button and label of - non-editable boxes with CC_ComboBox and CE_ComboBoxLabel. - - The list that pops up when the user clicks on the combo box is - drawn by a \l{Delegate Classes}{delegate}, which we do not cover - in this overview. You can, however, use the style to control the - list's size and position with the sub element - SC_ComboBoxListBoxPopup. The style also decides where the edit - field for editable boxes should be with SC_ComboBoxEditField; the - field itself is a QLineEdit that is a child of the combo box. - - \image javastyle/combobox.png - - We show an image over a java style combo box in which we have - outlined its sub elements and sub element rectangles: - - \image javastyle/comboboximage.png - - Java combo boxes do not use the focus rect; it changes its - background color when it has focus. The SC_ComboBoxEdit field is - used both by QComboBox to calculate the size of the edit field and - the style for calculating the size of the combo box label. - - The style option for combo boxes is QStyleOptionComboBox. It - can set the following states: - - \table 90% - \header - \o State - \o Set When - \row - \o State_Selected - \o The box is not editable and has focus - \row - \o State_Sunken - \o SC_ComboBoxArrow is active - \row - \o State_on - \o The container (list) of the box is visible - \endtable - - The style options other members are: - - \table - \header - \o Member - \o Content - \row - \o currentIcon - \o the icon of the current (selected) item of the - combo box. - \row - \o currentText - \o the text of the current item in the box. - \row - \o editable - \o holds whether the combo box is editable or not - \row - \o frame - \o holds whether the combo box has a frame or not - \row - \o iconSize - \o the size of the current items icon. - \row - \o popupRect - \o the bounding rectangle of the combo box's popup - list. - \endtable - - \section3 Group Boxes - - When calculating the size hint, QGroupBox fetches three pixel - metrics from the style: PM_IndicatorWidth, - PM_CheckBoxLabelSpacing, and PM_IndicatorHeight. QGroupBox has - the following style element tree: - - \image javastyle/groupbox.png - - Qt does not impose restrictions on how the check box is drawn; the - java style draws it with CE_IndicatorCheckBox. See \l{Check and - Radio Buttons} for the complete tree. - - We also give an image of the widget with the sub controls and - sub control rectangles drawn: - - \image javastyle/groupboximage.png - - The style option for group boxes are QStyleOptionGroupBox. The - following states can be set on it: - - \table 90% - \header - \o State - \o Set When - \row - \o State_On - \o The check box is checked - \row - \o State_Sunken - \o The checkbox is pressed down - \row - \o State_Off - \o The check box is unchecked (or there is no check box) - \endtable - - The remaining members of QStyleOptionGroupBox are: - - \table - \header - \o Member - \o Content - \row - \o features - \o flags of the QStyleOptionFrameV2::FrameFeatures - enum describing the frame of the group box. - \row - \o lineWidth - \o the line width with which to draw the panel. This - is always 1. - \row - \o text - \o the text of the group box. - \row - \o textAlignment - \o the alignment of the group box title - \row - \o textColor - \o the QColor of the text - \endtable - - \section3 Splitters - - As the structure of splitters are simple and do not contain any - sub elements, we do not include image of splitters. CE_Splitter - does not use any other elements or metrics. - - For its style option, Splitters uses the base class QStyleOption. - It can set the following state flags on it: - - \table 90% - \header - \o State - \o Set When - \row - \o State_Horizontal - \o Set if it is a horizontal splitter - \endtable - - QSplitter does not use \l{QStyleOption::}{init()} to set up its - option; it sets the State_MouseOver and State_Disabled flags - itself. - - \section3 Progress Bar - - The CE_ProgressBar element is used by QProgressBar, and it is the - only element used by this widget. We start with looking at the - style structure: - - \image javastyle/progressbar.png - - Here is a progress bar in the windows style (the java style - bounding rectangles are equal): - - \image javastyle/progressbarimage.png - - The style option for QProgressBar is QStyleOptionProgressBarV2. - The bar does not set any state flags, but the other members of the - option are: - - \table 90% - \header - \o Member - \o Content - \row - \o minimum - \o The minimum value of the bar - \row - \o maximum - \o The maximum value of the bar - \row - \o progress - \o The current value of the bar - \row - \o textAlignment - \o How the text is aligned in the label - \row - \o textVisible - \o Whether the label is drawn - \row - \o text - \o The label text - \row - \o orientation - \o Progress bars can be vertical or horizontal - \row - \o invertedAppearance - \o The progress is inverted (i.e., right to left in a - horizontal bar) - \row - \o bottomToTop - \o Boolean that if true, turns the label of vertical - progress bars 90 degrees. - \endtable - - \section3 Tool Buttons - - Tool buttons exist either independently or as part of tool bars. - They are drawn equally either way. The QToolButton draws only one - style element: CC_ToolButton. - - As you must be used to by now (at least if you have read this - document sequentially), we have a tree of the widget's style - structure: - - \image javastyle/toolbutton.png - - Note that PE_FrameButtonTool and PE_IndicatorArrowDown are - included in the tree as the java style draws them, but they can - safely be omitted if you prefer it. The structure may also be - different. QWindowsStyle, for instance, draws both - PE_IndicatorButtonDropDown and PE_IndicatorArrowDown in - CE_ToolButton. - - We also have an image of a tool button where we have outlined - the sub element bounding rectangles and sub controls. - - \image javastyle/toolbuttonimage.png - - Here is the states table for tool buttons: - - \table 90% - \header - \o State - \o Set When - \row - \o State_AutoRise - \o the tool button has the autoRise property set - \row - \o State_raised - \o the button is not sunken (i.e., by being checked or - pressed on with the mouse). - \row - \o State_Sunken - \o the button is down - \row - \o State_On - \o the button is checkable and checked. - \endtable - - QStyleOptionToolButton also contains the following members: - - \table - \header - \o Member - \o Content - \row - \o arrowType - \o a Qt::ArrowType enum value, which contains the - direction of the buttons arrow (if an arrow is to - be used in place of an icon) - \row - \o features - \o flags of the QStyleOptionToolButton::ButtonFeature - enum describing if the button has an arrow, a menu, - and/or has a popup-delay. - \row - \o font - \o the QFont of the buttons label - \row - \o icon - \o the QIcon of the tool button - \row - \o iconSize - \o the icon size of the button's icon - \row - \o pos - \o the position of the button, as given by - QWidget::pos() - \row - \o text - \o the text of the button - \row - \o toolButtonStyle - \o a Qt::ToolButtonStyle enum value which decides - whether the button shows the icon, the text, or both. - \endtable - - \section3 Toolbars - - Toolbars are part of the \l{QMainWindow}{main window framework} - and cooperates with the QMainWindow to which it belongs while it - builds its style option. A main window has 4 areas that toolbars - can be placed in. They are positioned next to the four sides of - the window (i.e., north, south, west, and east). Within each area - there can be more than one line of toolbars; a line consists of - toolbars with equal orientation (vertical or horizontal) placed - next to each other. - - \l{QToolbar}{QToolbar}s in Qt consists of three elements - CE_ToolBar, PE_IndicatorToolBarHandle, and - PE_IndicatorToolBarSeparator. It is QMainWindowLayout that - calculates the bounding rectangles (i.e., position and size of the - toolbars and their contents. The main window also uses the \c - sizeHint() of the items in the toolbars when calculating the size - of the bars. - - Here is the element tree for QToolBar: - - \image javastyle/toolbar.png - - The dotted lines indicate that the QToolBar keeps an instance of - QToolBarLayout and that QToolBarSeparators are kept by - QToolBarLayout. When the toolbar is floating (i.e., has its own - window) the PE_FrameMenu element is drawn, else QToolbar draws - CE_ToolBar. - - Here is an image of a toolbar in the java style: - - \image javastyle/toolbarimage.png - - QToolBarSaparator uses QStyleOption for their style option. It - sets the State_horizontal flag if the toolbar they live in is - horizontal. Other than that, they use \l{QStyleOption::}{init()}. - - The style option for QToolBar is QStyleOptionToolBar. The only - state flag set (besides the common flags) is State_Horizontal - if the bar is horizontal (i.e., in the north or south toolbar area). - The member variables of the style option are: - - \table 90% - \header - \o Member - \o Content - \row - \o features - \o Holds whether the bar is movable in a value of the - ToolBarFeature, which is either Movable or None. - \row - \o lineWidth - \o The width of the tool bar frame. - \row - \o midLineWidth - \o This variable is currently not used and is always - 0. - \row - \o positionOfLine - \o The position of the toolbar line within the toolbar - area to which it belongs. - \row - \o positionWithinLine - \o The position of the toolbar within the toolbar line. - \row - \o toolBarArea - \o The toolbar area in which the toolbar lives. - \endtable - - \section3 Menus - - Menus in Qt are implemented in QMenu. The QMenu keeps a list of - action, which it draws as menu items. When QMenu receives paint - events ,it calculates the size of each menu item and draws them - individually with CE_MenuItem. (Menu items do not have a separate - element for their label (contents), so all drawing is done in - CE_MenuItem. The menu also draws the frame of the menu with - PE_FrameMenu. It also draws CE_MenuScroller if the style supports - scrolling. CE_MenuTearOff is drawn if the menu is to large for its - bounding rectangle. - - In the style structure tree, we also include QMenu as it also does - styling related work. The bounding rectangles of menu items are - calculated for the menus size hint and when the menu is displayed - or resized. - - \image javastyle/menu.png - - The CE_MenuScroller and CE_MenuTearOff elements are handled by - QCommonStyle and are not shown unless the menu is to large to fit - on the screen. PE_FrameMenu is only drawn for pop-up menus. - - QMenu calculates rectangles based on its actions and calls - CE_MenuItem and CE_MenuScroller if the style supports that. - - It is also usual to use PE_IndicatorCheckBox (instead of using - PE_IndicatorMenuCheckMark) and PE_IndicatorRadioButton for drawing - checkable menu items; we have not included them in the style tree - as this is optional and varies from style to style. - - \image javastyle/menuimage.png - - The style option for menu items is QStyleOptionMenuItem. The - following tables describe its state flags and other members. - - \table 90% - \header - \o State - \o Set When - \row - \o State_Selected - \o The mouse is over the action and the action is not - a separator. - \row - \o State_Sunken - \o The mouse is pressed down on the menu item. - \row - \o State_DownArrow - \o Set if the menu item is a menu scroller and it scrolls - the menu downwards. - \endtable - - \table 90% - \header - \o Member - \o Content - \row - \o checkType - \o A value of the \l{QStyleOptionMenuItem::}{CheckType} enum, - which is either NotCheckable, Exclusive, or - NonExclusive. - \row - \o checked - \o Boolean that is true if the menu item is checked. - \row - \o font - \o The QFont to use for the menu item's text. - \row - \o icon - \o the QIcon of the menu item. - \row - \o maxIconWidth - \o The maximum width allowed for the icon - \row - \o menuHasChecableItem - \o Boolean which is true if at least one item in the - menu is checkable. - \row - \o menuItemType - \o The type of the menu item. This a value of the - \l{QStyleOptionMenuItem::}{MenuItemType}. - \row - \o menuRect - \o The bounding rectangle for the QMenu that the menu - item lives in. - \row - \o tabWidth - \o This is the distance between the text of the menu - item and the shortcut. - \row - \o text - \o The text of the menu item. - \endtable - - The setup of the style option for CE_MenuTearOff and - CE_MenuScroller also uses QStyleOptionMenuItem; they only set the - \c menuRect variable in addition to the common settings with - QStyleOption's \l{QStyleOption::}{init()}. - - \section3 Menu Bar - - QMenuBar uses the style to draw each menu bar item and the empty - area of the menu bar. The pull-down menus themselves are - \l{QMenu}s (see \l{Menus}). The style element tree for the menu - bar follows: - - \image javastyle/menubar.png - - The panel and empty area is drawn after the menu items. The - QPainter that the QMenuBar sends to the style has the bounding - rectangles of the items clipped out (i.e., clip region), so you - don't need to worry about drawing over the items. The pixel - metrics in QMenuBar is used when the bounding rectangles of the - menu bar items are calculated. - - \image javastyle/menubarimage.png - - QStyleOptionMenuItem is used for menu bar items. The members that - are used by QMenuBar is described in the following table: - - \table - \header - \o Member - \o Content - \row - \o menuRect - \o the bounding rectangle of the entire menu bar to - which the item belongs. - \row - \o text - \o the text of the item - \row - \o icon - \o the icon of the menu item (it is not common that - styles draw this icon) - \endtable - - QStyleOptionMenuItem is also used for drawing CE_EmptyMenuBarArea. - - QStyleOptionFrame is used for drawing the panel frame The - \l{QStyleOptionFrame::}{lineWidth} is set to PM_MenuBarPanelWidth. - The \l{QStyleOptionFrame::}{midLineWidth} is currently always set - to 0. - - \section3 Item View Headers - - It is the style that draws the headers of Qt's item views. The - item views keeps the dimensions on individual sections. Also - note that the delegates may use the style to paint decorations - and frames around items. QItemDelegate, for instance, draws - PE_FrameFocusRect and PE_IndicatorViewItemCheck. - - \image javastyle/header.png - - Here is a QTableWidget showing the bounding rects of a Java - header: - - \image javastyle/headerimage.png - - The QHeaderView uses CT_HeaderSection, PM_HeaderMargin and - PM_HeaderGripMargin for size and hit test calculations. The - PM_HeaderMarkSize is currently not used by Qt. QTableView draws - the button in the top-left corner (i.e., the area where the - vertical and horizontal headers intersect) as a CE_Header. - - The style option for header views is QStyleOptionHeader. The view - paints one header section at a time, so the data is for the - section being drawn. Its contents are: - - \table 90% - \header - \o Member - \o Content - \row - \o icon - \o the icon of the header (for section that is being - drawn). - \row - \o iconAlignment - \o the alignment (Qt::Alignment) of the icon in the header. - \row - \o orientation - \o a Qt::Orientation value deciding whether the header - is the horizontal header above the view or the - vertical header on the left. - \row - \o position - \o a QStyleOptionHeader::SectionPosition value - giving the header section's position relative to - the other sections. - \row - \o section - \o holds the section that is being drawn. - \row - \o selectedPosition - \o a QStyleOptionHeader::SelectedPosition value giving - the selected section's position relative to the - section that is being painted. - \row - \o sortIndicator - \o a QStyleOptionHeader::SortIndicator value that - describes the direction in which the section's sort - indicator should be drawn. - \row - \o text - \o the text of the currently drawn section. - \row - \o textAlignment - \o the Qt::Alignment of the text within the - headersection. - \endtable - - \section3 Tree Branch Indicators - - The branch indicators in a tree view is drawn by the style with - PE_IndicatorBranch. We think of indicators here as the indicators - that describe the relationship of the nodes in the tree. The - generic QStyleOption is sent to the style for drawing this - elements. The various branch types are described by states. Since - there are no specific style option, we simply present the states - table: - - \table 90% - \header - \o State - \o Set When - \row - \o State_Sibling - \o the node in the tree has a sibling (i.e., there is - another node in the same column). - \row - \o State_Item - \o this branch indicator has an item. - \row - \o State_Children - \o the branch has children (i.e., a new sub-tree can - be opened at the branch). - \row - \o State_Open - \o the branch indicator has an opened sub-tree. - \endtable - - The tree view (and tree widget) use the style to draw the branches - (or nodes if you will) of the tree. - - QStyleOption is used as the style for PE_IndicatorBranch has state - flags set depending on what type of branch it is. - - Since there is no tree structure for branch indicators, we only - present an image of a tree in the java style. Each state is marked - in the image with a rectangle in a specific color (i.e., these - rectangles are not bounding rectangles). All combinations of - states you must be aware of are represented in the image. - - \image javastyle/branchindicatorimage.png - - \section3 Tool Boxes - - PM_SmallIconSize for sizeHints. - - QToolBox is a container that keeps a collection of widgets. It has - one tab for each widget and display one of them at a time. The - tool box lays the components it displays (the tool box buttons - and selected widget) in a QVBoxLayout. The style tree for tool - boxes looks like this: - - \image javastyle/toolbox.png - - We show an image of a tool box in the Plastique style: - - \image javastyle/toolboximage.png - - All elements have the same bounding rectangles in the - Plastique as well as the other Qt built-in styles. - - The style option for tool boxes is QStyleOptionToolBox. It - contains the text and icon of the tool box contents. The only - state set by QToolBox is State_Sunken, which is set when the user - presses a tab down with the mouse. The rest of the - QStyleOptionToolBox members are: - - \table 90% - \header - \o Member - \o Content - \row - \o icon - \o the icon on the toolbox tab - \row - \o text - \o the text on the toolbox tab - \endtable - - \section3 Size Grip - - The size grip calculates its size hint with CT_SizeGrip. The pixel - metric PM_SizeGripSize is currently unused by Qt. The element tree - for and an image in the Plastique style of QSizeGrip follows: - - \image javastyle/sizegrip.png - - \image javastyle/sizegripimage.png - - We show the size grip in a \l{QMainWindow}'s bottom right - corner. - - The size grip style option, QStyleOptionSizeGrip, have one - member except the common members from QStyleOption: - - \table 90% - \header - \o Member - \o Content - \row - \o corner - \o a Qt::Corner value that describe which corner in a - window (or equivalent) the grip is located. - \endtable - - \section3 Rubber Band - - The \l{QRubberBand}'s style tree consists of two nodes. - - \image javastyle/rubberband.png - - We present an image of a Java style window being moved in a - QMdiArea with a rubber band: - - \image javastyle/rubberbandimage.png - - The style option for rubber bands is QStyleOptionRubberBand. - Its members are: - - \table - \header - \o Member - \o Content - \row - \o opaque - \o boolean that is true if the rubber band must be - drawn in an opaque style (i.e., color) - \row - \o shape - \o a QRubberBand::Shape enum value that holds the - shape of the band (which is either a rectangle or a - line) - \endtable - - \section3 Dock Widgets - - When the dock widget lays out its contents it asks the style for - these pixel metrics: PM_DockWidgetSeparatorExtent, - PM_DockWidgetTitleBarButtonMargin, PM_DockWidgetFrameWidth, and - PM_DockWidgetTitleMargin. It also calculates the bounding - rectangles of the float and close buttons with - SE_DockWidgetCloseButton and SE_DockWidgetFloatButton. - - \image javastyle/dockwidget.png - - The dotted lines indicate that the sender keeps instances of the - recipient of the arrow (i.e., it is not a style element to draw). - The dock widget only draws PE_frameDockWidget when it is detached - from its main window (i.e., it is a top level window). If it is - docked it draws the indicator dock widget resize handle. We show a - dock widget in both docked and floating state in the plastique - style: - - \image javastyle/dockwidgetimage.png - - The style option is QStyleOptionDockWidget: - - \table 90% - \header - \o Member - \o Content - \row - \o closeable - \o boolean that holds whether the dock window can be - closed - \row - \o floatable - \o boolean that holds whether the dock window can - float (i.e., detach from the main window in which - it lives) - \row - \o movable - \o boolean that holds whether the window is movable - (i.e., can move to other dock widget areas) - \row - \o title - \o the title text of the dock window - \endtable - - For the buttons, QStyleOptionButton is used (see \l{Tool Buttons} - for content description). The dock widget resize handle has a - plain QStyleOption. -*/ |