diff options
Diffstat (limited to 'doc/src/widgets-and-layouts/layout.qdoc')
| -rw-r--r-- | doc/src/widgets-and-layouts/layout.qdoc | 396 |
1 files changed, 396 insertions, 0 deletions
diff --git a/doc/src/widgets-and-layouts/layout.qdoc b/doc/src/widgets-and-layouts/layout.qdoc new file mode 100644 index 0000000..4622301 --- /dev/null +++ b/doc/src/widgets-and-layouts/layout.qdoc @@ -0,0 +1,396 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at http://qt.nokia.com/contact. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \group geomanagement + \title Layout Classes +*/ + +/*! + \page layout.html + \title Layout Management + \brief A tour of the standard layout managers and an introduction to custom + layouts. + + \previouspage Widget Classes + \contentspage Widgets and Layouts + \nextpage {Implementing Styles and Style Aware Widgets}{Styles} + + \ingroup frameworks-technologies + + The Qt layout system provides a simple and powerful way of automatically + arranging child widgets within a widget to ensure that they make good use + of the available space. + + \tableofcontents + + \section1 Introduction + + Qt includes a set of layout management classes that are used to describe + how widgets are laid out in an application's user interface. These layouts + automatically position and resize widgets when the amount of space + available for them changes, ensuring that they are consistently arranged + and that the user interface as a whole remains usable. + + All QWidget subclasses can use layouts to manage their children. The + QWidget::setLayout() function applies a layout to a widget. When a layout + is set on a widget in this way, it takes charge of the following tasks: + + \list + \o Positioning of child widgets. + \o Sensible default sizes for windows. + \o Sensible minimum sizes for windows. + \o Resize handling. + \o Automatic updates when contents change: + \list + \o Font size, text or other contents of child widgets. + \o Hiding or showing a child widget. + \o Removal of child widgets. + \endlist + \endlist + + \section1 Qt's Layout Classes + + Qt's layout classes were designed for hand-written C++ code, allowing + measurements to be specified in pixels for simplicity, so they are easy to + understand and use. The code generated for forms created using \QD also + uses the layout classes. \QD is useful to use when experimenting with the + design of a form since it avoids the compile, link and run cycle usually + involved in user interface development. + + \annotatedlist geomanagement + + \section1 Horizontal, Vertical, Grid, and Form Layouts + + The easiest way to give your widgets a good layout is to use the built-in + layout managers: QHBoxLayout, QVBoxLayout, QGridLayout, and QFormLayout. + These classes inherit from QLayout, which in turn derives from QObject (not + QWidget). They take care of geometry management for a set of widgets. To + create more complex layouts, you can nest layout managers inside each other. + + \list + \o A QHBoxLayout lays out widgets in a horizontal row, from left to + right (or right to left for right-to-left languages). + \image qhboxlayout-with-5-children.png + + \o A QVBoxLayout lays out widgets in a vertical column, from top to + bottom. + \image qvboxlayout-with-5-children.png + + \o A QGridLayout lays out widgets in a two-dimensional grid. Widgets + can occupy multiple cells. + \image qgridlayout-with-5-children.png + + \o A QFormLayout lays out widgets in a 2-column descriptive label- + field style. + \image qformlayout-with-6-children.png + \endlist + + + \section2 Laying Out Widgets in Code + + The following code creates a QHBoxLayout that manages the geometry of five + \l{QPushButton}s, as shown on the first screenshot above: + + \snippet doc/src/snippets/layouts/layouts.cpp 0 + \snippet doc/src/snippets/layouts/layouts.cpp 1 + \snippet doc/src/snippets/layouts/layouts.cpp 2 + \codeline + \snippet doc/src/snippets/layouts/layouts.cpp 3 + \snippet doc/src/snippets/layouts/layouts.cpp 4 + \snippet doc/src/snippets/layouts/layouts.cpp 5 + + The code for QVBoxLayout is identical, except the line where the layout is + created. The code for QGridLayout is a bit different, because we need to + specify the row and column position of the child widget: + + \snippet doc/src/snippets/layouts/layouts.cpp 12 + \snippet doc/src/snippets/layouts/layouts.cpp 13 + \snippet doc/src/snippets/layouts/layouts.cpp 14 + \codeline + \snippet doc/src/snippets/layouts/layouts.cpp 15 + \snippet doc/src/snippets/layouts/layouts.cpp 16 + \snippet doc/src/snippets/layouts/layouts.cpp 17 + + The third QPushButton spans 2 columns. This is possible by specifying 2 as + the fifth argument to QGridLayout::addWidget(). + + Finally, the code for QFormLayout is .. + + + \section2 Tips for Using Layouts + + When you use a layout, you do not need to pass a parent when constructing + the child widgets. The layout will automatically reparent the widgets + (using QWidget::setParent()) so that they are children of the widget on + which the layout is installed. + + \note Widgets in a layout are children of the widget on which the layout + is installed, \e not of the layout itself. Widgets can only have other + widgets as parent, not layouts. + + You can nest layouts using \c addLayout() on a layout; the inner layout + then becomes a child of the layout it is inserted into. + + + \section1 Adding Widgets to a Layout + + When you add widgets to a layout, the layout process works as follows: + + \list 1 + \o All the widgets will initially be allocated an amount of space in + accordance with their QWidget::sizePolicy() and + QWidget::sizeHint(). + + \o If any of the widgets have stretch factors set, with a value + greater than zero, then they are allocated space in proportion to + their stretch factor (explained below). + + \o If any of the widgets have stretch factors set to zero they will + only get more space if no other widgets want the space. Of these, + space is allocated to widgets with an + \l{QSizePolicy::Expanding}{Expanding} size policy first. + + \o Any widgets that are allocated less space than their minimum size + (or minimum size hint if no minimum size is specified) are + allocated this minimum size they require. (Widgets don't have to + have a minimum size or minimum size hint in which case the strech + factor is their determining factor.) + + \o Any widgets that are allocated more space than their maximum size + are allocated the maximum size space they require. (Widgets do not + have to have a maximum size in which case the strech factor is + their determining factor.) + \endlist + + + \section2 Stretch Factors + \keyword stretch factor + + Widgets are normally created without any stretch factor set. When they are + laid out in a layout the widgets are given a share of space in accordance + with their QWidget::sizePolicy() or their minimum size hint whichever is + the greater. Stretch factors are used to change how much space widgets are + given in proportion to one another. + + If we have three widgets laid out using a QHBoxLayout with no stretch + factors set we will get a layout like this: + + \img layout1.png Three widgets in a row + + If we apply stretch factors to each widget, they will be laid out in + proportion (but never less than their minimum size hint), e.g. + + \img layout2.png Three widgets with different stretch factors in a row + + + \section1 Custom Widgets in Layouts + + When you make your own widget class, you should also communicate its layout + properties. If the widget has a one of Qt's layouts, this is already taken + care of. If the widget does not have any child widgets, or uses manual + layout, you can change the behavior of the widget using any or all of the + following mechanisms: + + \list + \o Reimplement QWidget::sizeHint() to return the preferred size of the + widget. + \o Reimplement QWidget::minimumSizeHint() to return the smallest size + the widget can have. + \o Call QWidget::setSizePolicy() to specify the space requirements of + the widget. + \endlist + + Call QWidget::updateGeometry() whenever the size hint, minimum size hint or + size policy changes. This will cause a layout recalculation. Multiple + consecutive calls to QWidget::updateGeometry() will only cause one layout + recalculation. + + If the preferred height of your widget depends on its actual width (e.g., + a label with automatic word-breaking), set the + \l{QSizePolicy::hasHeightForWidth()}{height-for-width} flag in the + widget's \l{QWidget::sizePolicy}{size policy} and reimplement + QWidget::heightForWidth(). + + Even if you implement QWidget::heightForWidth(), it is still a good idea to + provide a reasonable sizeHint(). + + For further guidance when implementing these functions, see the + \e{Qt Quarterly} article + \l{http://qt.nokia.com/doc/qq/qq04-height-for-width.html} + {Trading Height for Width}. + + + \section1 Layout Issues + + The use of rich text in a label widget can introduce some problems to the + layout of its parent widget. Problems occur due to the way rich text is + handled by Qt's layout managers when the label is word wrapped. + + In certain cases the parent layout is put into QLayout::FreeResize mode, + meaning that it will not adapt the layout of its contents to fit inside + small sized windows, or even prevent the user from making the window too + small to be usable. This can be overcome by subclassing the problematic + widgets, and implementing suitable \l{QWidget::}{sizeHint()} and + \l{QWidget::}{minimumSizeHint()} functions. + + In some cases, it is relevant when a layout is added to a widget. When + you set the widget of a QDockWidget or a QScrollArea (with + QDockWidget::setWidget() and QScrollArea::setWidget()), the layout must + already have been set on the widget. If not, the widget will not be + visible. + + + \section1 Manual Layout + + If you are making a one-of-a-kind special layout, you can also make a + custom widget as described above. Reimplement QWidget::resizeEvent() to + calculate the required distribution of sizes and call + \l{QWidget::}{setGeometry()} on each child. + + The widget will get an event of type QEvent::LayoutRequest when the + layout needs to be recalculated. Reimplement QWidget::event() to handle + QEvent::LayoutRequest events. + + + \section1 How to Write A Custom Layout Manager + + An alternative to manual layout is to write your own layout manager by + subclassing QLayout. The \l{layouts/borderlayout}{Border Layout} and + \l{layouts/flowlayout}{Flow Layout} examples show how to do this. + + Here we present an example in detail. The \c CardLayout class is inspired + by the Java layout manager of the same name. It lays out the items (widgets + or nested layouts) on top of each other, each item offset by + QLayout::spacing(). + + To write your own layout class, you must define the following: + \list + \o A data structure to store the items handled by the layout. Each + item is a \link QLayoutItem QLayoutItem\endlink. We will use a + QList in this example. + \o \l{QLayout::}{addItem()}, how to add items to the layout. + \o \l{QLayout::}{setGeometry()}, how to perform the layout. + \o \l{QLayout::}{sizeHint()}, the preferred size of the layout. + \o \l{QLayout::}{itemAt()}, how to iterate over the layout. + \o \l{QLayout::}{takeAt()}, how to remove items from the layout. + \endlist + + In most cases, you will also implement \l{QLayout::}{minimumSize()}. + + + \section2 The Header File (\c card.h) + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 0 + + + \section2 The Implementation File (\c card.cpp) + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 1 + + First we define \c{count()} to fetch the number of items in the list. + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 2 + + Then we define two functions that iterate over the layout: \c{itemAt()} + and \c{takeAt()}. These functions are used internally by the layout system + to handle deletion of widgets. They are also available for application + programmers. + + \c{itemAt()} returns the item at the given index. \c{takeAt()} removes the + item at the given index, and returns it. In this case we use the list index + as the layout index. In other cases where we have a more complex data + structure, we may have to spend more effort defining a linear order for the + items. + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 3 + + \c{addItem()} implements the default placement strategy for layout items. + This function must be implemented. It is used by QLayout::add(), by the + QLayout constructor that takes a layout as parent. If your layout has + advanced placement options that require parameters, you must provide extra + access functions such as the row and column spanning overloads of + QGridLayout::addItem(), QGridLayout::addWidget(), and + QGridLayout::addLayout(). + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 4 + + The layout takes over responsibility of the items added. Since QLayoutItem + does not inherit QObject, we must delete the items manually. In the + destructor, we remove each item from the list using \c{takeAt()}, and + then delete it. + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 5 + + The \c{setGeometry()} function actually performs the layout. The rectangle + supplied as an argument does not include \c{margin()}. If relevant, use + \c{spacing()} as the distance between items. + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 6 + + \c{sizeHint()} and \c{minimumSize()} are normally very similar in + implementation. The sizes returned by both functions should include + \c{spacing()}, but not \c{margin()}. + + \snippet doc/src/snippets/code/doc_src_layout.qdoc 7 + + + \section2 Further Notes + + \list + \o This custom layout does not handle height for width. + \o We ignore QLayoutItem::isEmpty(); this means that the layout will + treat hidden widgets as visible. + \o For complex layouts, speed can be greatly increased by caching + calculated values. In that case, implement + QLayoutItem::invalidate() to mark the cached data is dirty. + \o Calling QLayoutItem::sizeHint(), etc. may be expensive. So, you + should store the value in a local variable if you need it again + later within in the same function. + \o You should not call QLayoutItem::setGeometry() twice on the same + item in the same function. This call can be very expensive if the + item has several child widgets, because the layout manager must do + a complete layout every time. Instead, calculate the geometry and + then set it. (This does not only apply to layouts, you should do + the same if you implement your own resizeEvent(), for example.) + \endlist +*/ + |