diff options
Diffstat (limited to 'doc/src/widgets-and-layouts/styles.qdoc')
| -rw-r--r-- | doc/src/widgets-and-layouts/styles.qdoc | 2123 |
1 files changed, 2123 insertions, 0 deletions
diff --git a/doc/src/widgets-and-layouts/styles.qdoc b/doc/src/widgets-and-layouts/styles.qdoc new file mode 100644 index 0000000..27554e0 --- /dev/null +++ b/doc/src/widgets-and-layouts/styles.qdoc @@ -0,0 +1,2123 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the documentation of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.1, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** If you have questions regarding the use of this file, please contact +** Nokia at qt-info@nokia.com. +** +** +** +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/*! + \group appearance + \title Widget Appearance and Style + \brief Classes used for customizing UI appearance and style. +*/ + +/*! + \page style-reference.html + \title Implementing Styles and Style Aware Widgets + \brief An overview of styles and the styling of widgets. + + \ingroup frameworks-technologies + + \previouspage Widget Classes + \contentspage Widgets and Layouts + \nextpage {Qt Style Sheets}{Style sheets} + + Styles (classes that inherit QStyle) draw on behalf of widgets + and encapsulate the look and feel of a GUI. The QStyle class is + an abstract base class that encapsulates the look and feel of a + GUI. Qt's built-in widgets use it to perform nearly all of their + drawing, ensuring that they look exactly like the equivalent + native widgets. + + Several styles are built into Qt (e.g., windows style and motif style). + Other styles are only available on specific platforms (such as + the windows XP style). Custom styles are made available as plugins + or by creating an instance of the style class in an application and + setting it with QApplication::setStyle(). + + To implement a new style, you inherit one of Qt's existing styles + - the one most resembling the style you want to create - and + reimplement a few virtual functions. This process is somewhat + involved, and we therefore provide this overview. We give a + step-by-step walkthrough of how to style individual Qt widgets. + We will examine the QStyle virtual functions, member variables, + and enumerations. + + The part of this document that does not concern the styling of + individual widgets is meant to be read sequentially because later + sections tend to depend on earlier ones. The description of the + widgets can be used for reference while implementing a style. + However, you may need to consult the Qt source code in some cases. + The sequence in the styling process should become clear after + reading this document, which will aid you in locating relevant code. + + To develop style aware widgets (i.e., widgets that conform to + the style in which they are drawn), you need to draw them using the + current style. This document shows how widgets draw themselves + and which possibilities the style gives them. + + \tableofcontents + + \section1 Classes for Widget Styling + + These classes are used to customize an application's appearance and + style. + + \annotatedlist appearance + + \section1 The QStyle implementation + + The API of QStyle contains functions that draw the widgets, static + helper functions to do common and difficult tasks (e.g., + calculating the position of slider handles) and functions to do + the various calculations necessary while drawing (e.g., for the + widgets to calculate their size hints). The style also help some + widgets with the layout of their contents. In addition, it creates + a QPalette that contains \l{QBrush}es to draw with. + + QStyle draws graphical elements; an element is a widget or a + widget part like a push button bevel, a window frame, or a scroll + bar. Most draw functions now take four arguments: + + \list + \o an enum value specifying which graphical element to draw + \o a QStyleOption specifying how and where to render that element + \o a QPainter that should be used to draw the element + \o a QWidget on which the drawing is performed (optional) + \endlist + + When a widget asks a style to draw an element, it provides the style + with a QStyleOption, which is a class that contains the information + necessary for drawing. Thanks to QStyleOption, it is possible to make + QStyle draw widgets without linking in any code for the widget. This + makes it possible to use \l{QStyle}'s draw functions on any paint + device. Ie you can draw a combobox on any widget, not just on a + QComboBox. + + The widget is passed as the last argument in case the style needs + it to perform special effects (such as animated default buttons on + Mac OS X), but it isn't mandatory. + + We will in the course of this section look at the style elements, + the style options, and the functions of QStyle. Finally, we describe + how the palette is used. + + Items in item views is drawn by \l{Delegate Classes}{delegates} in + Qt. The item view headers are still drawn by the style. Qt's + default delegate, QStyledItemDelegate, draws its items partially + through the current style; it draws the check box indicators and + calculate bounding rectangles for the elements of which the item + consists. In this document, we only describe how to implement a + QStyle subclass. If you wish to add support for other datatypes + than those supported by the QStyledItemDelegate, you need to + implement a custom delegate. Note that delegates must be set + programmatically for each individual widget (i.e., default + delegates cannot be provided as plugins). + + \section2 The Style Elements + + A style element is a graphical part of a GUI. A widget consists + of a hierarchy (or tree) of style elements. For instance, when a + style receives a request to draw a push button (from QPushButton, + for example), it draws a label (text and icon), a button bevel, + and a focus frame. The button bevel, in turn, consists of a frame + around the bevel and two other elements, which we will look at + later. Below is a conceptual illustration of the push button + element tree. We will see the actual tree for QPushButton when we + go through the individual widgets. + + \image javastyle/conceptualpushbuttontree.png + + Widgets are not necessarily drawn by asking the style to draw + only one element. Widgets can make several calls to the style to + draw different elements. An example is QTabWidget, which draws its + tabs and frame individually. + + There are three element types: primitive elements, control + elements, and complex control elements. The elements are defined + by the \l{QStyle::}{ComplexControl}, \l{QStyle::}{ControlElement}, + and \l{QStyle::}{PrimitiveElement} enums. The values of + each element enum has a prefix to identify their type: \c{CC_} for + complex elements, \c{CE_} for control elements, and \c{PE_} for + primitive elements. We will in the following three sections see what + defines the different elements and see examples of widgets that use + them. + + The QStyle class description contains a list of these elements and + their roles in styling widgets. We will see how they are used when + we style individual widgets. + + \section3 Primitive Elements + + Primitive elements are GUI elements that are common and often used + by several widgets. Examples of these are frames, button bevels, + and arrows for spin boxes, scroll bars, and combo boxes. + Primitive elements cannot exist on their own: they are always part + of a larger construct. They take no part in the interaction with + the user, but are passive decorations in the GUI. + + \section3 Control Elements + + A control element performs an action or displays information + to the user. Examples of control elements are push buttons, check + boxes, and header sections in tables and tree views. Control + elements are not necessarily complete widgets such as push + buttons, but can also be widget parts such as tab bar tabs and + scroll bar sliders. They differ from primitive elements in that + they are not passive, but fill a function in the interaction with + the user. Controls that consist of several elements often use the + style to calculate the bounding rectangles of the elements. The + available sub elements are defined by the \l{QStyle::}{SubElement} + enum. This enum is only used for calculating bounding rectangles, + and sub elements are as such not graphical elements to be drawn + like primitive, control, and complex elements. + + \section3 Complex Control Elements + + Complex control elements contain sub controls. Complex controls + behave differently depending on where the user handles them with + the mouse and which keyboard keys are pressed. This is dependent + on which sub control (if any) that the mouse is over or received a + mouse press. Examples of complex controls are scroll bars and + combo boxes. With a scroll bar, you can use the mouse to move the + slider and press the line up and line down buttons. The available + sub controls are defined by the \l{QStyle}{SubControl} enum. + + In addition to drawing, the style needs to provide the widgets + with information on which sub control (if any) a mouse press was + made on. For instance, a QScrollBar needs to know if the user + pressed the slider, the slider groove, or one of the buttons. + + Note that sub controls are not the same as the control elements + described in the previous section. You cannot use the style to + draw a sub control; the style will only calculate the bounding + rectangle in which the sub control should be drawn. It is common, + though, that complex elements use control and primitive elements + to draw their sub controls, which is an approach that is + frequently used by the built-in styles in Qt and also the Java + style. For instance, the Java style uses PE_IndicatorCheckBox to + draw the check box in group boxes (which is a sub control of + CC_GroupBox). Some sub controls have an equivalent control element, + e.g., the scroll bar slider (SC_SCrollBarSlider and + CE_ScrollBarSlider). + + \section3 Other QStyle Tasks + + The style elements and widgets, as mentioned, use the style to + calculate bounding rectangles of sub elements and sub controls, + and pixel metrics, which is a style dependent size in screen + pixels, for measures when drawing. The available rectangles and + pixel metrics are represented by three enums in QStyle: + \l{QStyle::}{SubElement}, \l{QStyle::}{SubControl}, and + \l{QStyle::}{PixelMetric}. Values of the enums can easily by + identified as they start with SE_, SC_ and PM_. + + The style also contain a set of style hints, which is + represented as values in the \l{QStyle::}{StyleHint} enum. All + widgets do not have the same functionality and look in the + different styles. For instance, when the menu items in a menu do not + fit in a single column on the screen, some styles support + scrolling while others draw more than one column to fit all items. + + A style usually has a set of standard images (such as a warning, a + question, and an error image) for message boxes, file dialogs, + etc. QStyle provides the \l{QStyle::}{StandardPixmap} enum. Its + values represent the standard images. Qt's widgets use these, so + when you implement a custom style you should supply the images + used by the style that is being implemented. + + The style calculates the spacing between widgets in layouts. There + are two ways the style can handle these calculations. You can set + the PM_LayoutHorizontalSpacing and PM_LayoutVerticalSpacing, which + is the way the java style does it (through QCommonStyle). + Alternatively, you can implement QStyle::layoutSpacing() and + QStyle::layoutSpacingImplementation() if you need more control over + this part of the layout. In these functions you can calculate the + spacing based on control types (QSizePolicy::ControlType) for + different size policies (QSizePolicy::Policy) and also the style + option for the widget in question. + + \section2 Style Options + + The sub-classes of QStyleOption contain all information necessary + to style the individual elements. Style options are instantiated - + usually on the stack - and filled out by the caller of the QStyle + function. Depending on what is drawn the style will expect + different a different style option class. For example, the + QStyle::PE_FrameFocusRect element expects a QStyleOptionFocusRect + argument, and it's possible to create custom subclasses that a + custom style can use. The style options keep public variables + for performance reasons. + + The widgets can be in a number of different states, which are + defined by the \l{QStyle::}{State} enum. Some of the state flags have + different meanings depending on the widget, but others are common + for all widgets like State_Disabled. It is QStyleOption that sets + the common states with QStyleOption::initFrom(); the rest of the + states are set by the individual widgets. + + Most notably, the style options contain the palette and bounding + rectangles of the widgets to be drawn. Most widgets have + specialized style options. QPushButton and QCheckBox, for + instance, use QStyleOptionButton as style option, which contain + the text, icon, and the size of their icon. The exact contents of + all options are described when we go through individual widgets. + + When reimplementing QStyle functions that take a + QStyleOption parameter, you often need to cast the + QStyleOption to a subclass (e.g., QStyleOptionFocusRect). For + safety, you can use qstyleoption_cast() to ensure that the + pointer type is correct. If the object isn't of the right type, + qstyleoption_cast() returns 0. For example: + + \snippet doc/src/snippets/code/doc_src_qt4-styles.qdoc 0 + + The following code snippet illustrates how to use QStyle to + draw the focus rectangle from a custom widget's paintEvent(): + + \snippet doc/src/snippets/code/doc_src_qt4-styles.qdoc 1 + + The next example shows how to derive from an existing style to + customize the look of a graphical element: + + \snippet doc/src/snippets/customstyle/customstyle.h 0 + \codeline + \snippet doc/src/snippets/customstyle/customstyle.cpp 2 + \snippet doc/src/snippets/customstyle/customstyle.cpp 3 + \snippet doc/src/snippets/customstyle/customstyle.cpp 4 + + \section2 QStyle Functions + + The QStyle class defines three functions for drawing the primitive, + control, and complex elements: + \l{QStyle::}{drawPrimitive()}, + \l{QStyle::}{drawControl()}, and + \l{QStyle::}{drawComplexControl()}. The functions takes the + following parameters: + + \list + \o the enum value of the element to draw + \o a QStyleOption which contains the information needed to + draw the element. + \o a QPainter with which to draw the element. + \o a pointer to a QWidget, typically the widget + that the element is painted on. + \endlist + + Not all widgets send a pointer to themselves. If the style + option sent to the function does not contain the information you + need, you should check the widget implementation to see if it + sends a pointer to itself. + + The QStyle class also provides helper functions that are used + when drawing the elements. The \l{QStyle::}{drawItemText()} + function draws text within a specified rectangle and taking a + QPalette as a parameter. The \l{QStyle::}{drawItemPixmap()} + function helps to align a pixmap within a specified bounding + rectangle. + + Other QStyle functions do various calculations for the + functions that draw. The widgets also use these functions for + calculating size hints and also for bounding rectangle + calculations if they draw several style elements themselves. + As with the functions that draw elements the helper functions + typically takes the same arguments. + + \list + \o The \l{QStyle::}{subElementRect()} function takes a + \l{QStyle::}{SubElement} enum value, and calculates a bounding + rectangle for a sub element. The style uses this function to + know where to draw the different parts of an element. This is + mainly done for reuse. If you create a new style, you can use + the same location of sub elements as the super class. + + \o The \l{QStyle::}{subControlRect()} function is used to + calculate bounding rectangles for sub controls in complex + controls. When you implement a new style, you reimplement \c + subControlRect() and calculate the rectangles that are different + from the super class. + + \o The \l{QStyle::}{pixelMetric()} function returns a pixel + metric, which is a style dependent size given in screen + pixels. It takes a value of the \l{QStyle::}{PixelMetric} enum + and returns the correct measure. Note that pixel metrics do + not necessarily have to be static measures, but can be + calculated with, for example, the style option. + + \o The \l{QStyle::}{hitTestComplexControl()} function returns the + sub control that the mouse pointer is over in a complex control. + Usually, this is simply a matter of using + \l{QStyle::}{subControlRect()} to get the bounding rectangles of + the sub controls, and see which rectangle contains the position of + the cursor. + \endlist + + QStyle also have the functions \l{QStyle::}{polish()} and + \l{QStyle::}{unpolish()}. All widgets are sent to the \c polish() + function before being shown and to \c unpolish() when they + are hidden. You can use these functions to set attributes on the + widgets or do other work that is required by your style. For + instance, if you need to know when the mouse is hovering over the + widget, you need to set the \l{Qt::}{WA_Hover} widget attribute. + The State_MouseOver state flag will then be set in the widget's + style options. + + QStyle has a few static helper functions that do some common and + difficult tasks. They can calculate the position of a slider + handle from the value of the slider and transform rectangles + and draw text considering reverse layouts; see the QStyle + class documentation for more details. + + The usual approach when one reimplements QStyle virtual + functions is to do work on elements that are different from the + super class; for all other elements, you can simply use the super + class implementation. + + \section2 The Palette + + Each style provides a color - that is, QBrush - palette that + should be used for drawing the widgets. There is one set of colors + for the different widget states (QPalette::ColorGroup): active + (widgets in the window that has keyboard focus), inactive (widgets + used for other windows), and disabled (widgets that are set + disabled). The states can be found by querying the State_Active + and State_Enabled state flags. Each set contains color certain + roles given by the QPalette::ColorRole enum. The roles describe in + which situations the colors should be used (e.g., for painting + widget backgrounds, text, or buttons). + + How the color roles are used is up to the style. For instance, if + the style uses gradients, one can use a palette color and make it + darker or lighter with QColor::darker() and QColor::lighter() to + create the gradient. In general, if you need a brush that is not + provided by the palette, you should try to derive it from one. + + QPalette, which provides the palette, stores colors for + different widget states and color roles. The palette for a style + is returned by \l{QStyle::}{standardPalette()}. The standard + palette is not installed automatically when a new style is set + on the application (QApplication::setStyle()) or widget + (QWidget::setStyle()), so you must set the palette yourself + with (QApplication::setPalette()) or (QWidget::setPalette()). + + It is not recommended to hard code colors as applications and + individual widgets can set their own palette and also use the + styles palette for drawing. Note that none of Qt's widgets set + their own palette. The java style does hard code some colors, but + its author looks past this in silence. Of course, it is not + intended that the style should look good with any palette. + + \section2 Implementation Issues + + When you implement styles, there are several issues to + consider. We will give some hints and advice on implementation + here. + + When implementing styles, it is necessary to look through the + code of the widgets and code of the base class and its ancestors. + This is because the widgets use the style differently, because the + implementation in the different styles virtual functions can + affect the state of the drawing (e.g., by altering the QPainter + state without restoring it and drawing some elements without using + the appropriate pixel metrics and sub elements). + + It is recommended that the styles do not alter the proposed size + of widgets with the QStyle::sizeFromContents() function but let + the QCommonStyle implementation handle it. If changes need to be + made, you should try to keep them small; application development + may be difficult if the layout of widgets looks considerably + different in the various styles. + + We recommend using the QPainter directly for drawing, i.e., not + use pixmaps or images. This makes it easier for the style conform + to the palette (although you can set your own color table on a + QImage with \l{QImage::}{setColorTable()}). + + It is, naturally, possible to draw elements without using the + style to draw the sub elements as intended by Qt. This is + discouraged as custom widgets may depend on these sub elements to + be implemented correctly. The widget walkthrough shows how Qt + uses the sub elements. + + \section1 Java Style + + We have implemented a style that resembles the Java default look + and feel (previously known as Metal). We have done this as it is + relatively simple to implement and we wanted to build a style for + this overview document. To keep it simple and not to extensive, we + have simplified the style somewhat, but Qt is perfectly able to + make an exact copy of the style. However, there are no concrete + plans to implement the style as a part of Qt. + + In this section we will have a look at some implementation + issues. Finally, we will see a complete example on the styling of + a Java widget. We will continue to use the java style + throughout the document for examples and widget images. The + implementation itself is somewhat involved, and it is not + intended that you should read through it. + + \section2 Design and Implementation + + The first step in designing the style was to select the base + class. We chose to subclass QWindowsStyle. This class implements + most of the functionality we need other than performing the actual + drawing. Also, windows and java share layout of sub controls for + several of the complex controls (which reduces the amount of code + required considerably). + + The style is implemented in one class. We have done this + because we find it convenient to keep all code in one file. Also, + it is an advantage with regards to optimization as we instantiate + less objects. We also keep the number of functions at a minimum by + using switches to identify which element to draw in the functions. + This results in large functions, but since we divide the code for + each element in the switches, the code should still be easy to + read. + + \section2 Limitations and Differences from Java + + We have not fully implemented every element in the Java style. + This way, we have reduced the amount and complexity of the code. + In general, the style was intended as a practical example for + this style overview document, and not to be a part of Qt + itself. + + Not all widgets have every state implemented. This goes for + states that are common, e.g., State_Disabled. Each state is, + however, implemented for at least one widget. + + We have only implemented ticks below the slider. Flat push + buttons are also left out. We do not handle the case where the + title bars and dock window titles grows to small for their + contents, but simply draw sub controls over each other. + + We have not tried to emulate the Java fonts. Java and Qt use very + different font engines, so we don't consider it worth the effort + as we only use the style as an example for this overview. + + We have hardcoded the colors (we don't use the QPalette) for + the linear gradients, which are used, for example, for button + bevels, tool bars, and check boxes. This is because the Java + palette cannot produce these colors. Java does not change these + colors based on widget color group or role anyway (they are not + dependent on the palette), so it does not present a problem in any + case. + + It is Qt's widgets that are styled. Some widgets do not exist + at all in Java, e.g., QToolBox. Others contain elements that the + Java widgets don't. The tree widget is an example of the latter in + which Java's JTree does not have a header. + + The style does not handle reverse layouts. We assume that the + layout direction is left to right. QWindowsStyle handles reverse + widgets; if we implemented reverse layouts, widgets that we change + the position of sub elements, or handle text alignment in labels + our selves would need to be updated. + + \section2 Styling Java Check Boxes + + As an example, we will examine the styling of check boxes in the + java style. We describe the complete process and print all code in + both the java style and Qt classes involved. In the rest of this + document, we will not examine the source code of the individual + widgets. Hopefully, this will give you an idea on how to search + through the code if you need to check specific implementation + details; most widgets follow the same structure as the check + boxes. We have edited the QCommonStyle code somewhat to remove + code that is not directly relevant for check box styling. + + We start with a look at how QCheckBox builds it style option, + which is QStyleOptionButton for checkboxes: + + \snippet doc/src/snippets/code/doc_src_styles.qdoc 0 + + First we let QStyleOption set up the option with the information + that is common for all widgets with \c initFrom(). We will look at + this shortly. + + The down boolean is true when the user press the box down; this is + true whether the box is checked or not of the checkbox. The + State_NoChange state is set when we have a tristate checkbox and + it is partially checked. It has State_On if the box is checked and + State_Off if it is unchecked. State_MouseOver is set if the mouse + hovers over the checkbox and the widget has attribute Qt::WA_Hover + set - you set this in QStyle::polish(). In addition, the style + option also contains the text, icon, and icon size of the button. + + \l{QStyleOption::}{initFrom()} sets up the style option with the + attributes that are common for all widgets. We print its + implementation here: + + \snippet doc/src/snippets/code/doc_src_styles.qdoc 1 + + The State_Enabled is set when the widget is enabled. When the + widget has focus the State_HasFocus flag is set. Equally, the + State_Active flag is set when the widget is a child of the active + window. The State_MouseOver will only be set if the widget has + the WA_HoverEnabled windows flag set. Notice that keypad + navigation must be enabled in Qt for the State_HasEditFocus to + be included; it is not included by default. + + In addition to setting state flags the QStyleOption contains + other information about the widget: \c direction is the layout + direction of the layout, \c rect is the bounding rectangle of the + widget (the area in which to draw), \c palette is the QPalette + that should be used for drawing the widget, and \c fontMetrics is + the metrics of the font that is used by the widget. + + We give an image of a checkbox and the style option to match + it. + + \image javastyle/checkboxexample.png A java style checkbox + + The above checkbox will have the following state flags in its + style option: + + \table 90% + \header + \o State flag + \o Set + \row + \o State_Sunken + \o Yes + \row + \o State_NoChange + \o No + \row + \o State_On + \o Yes + \row + \o State_Off + \o No + \row + \o State_MouseOver + \o Yes + \row + \o State_Enabled + \o Yes + \row + \o State_HasFocus + \o Yes + \row + \o State_KeyboardFocusChange + \o No + \row + \o State_Active + \o Yes + \endtable + + The QCheckBox paints itself in QWidget::paintEvent() with + style option \c opt and QStylePainter \c p. The QStylePainter + class is a convenience class to draw style elements. Most + notably, it wraps the methods in QStyle used for painting. The + QCheckBox draws itself as follows: + + \snippet doc/src/snippets/code/doc_src_styles.qdoc 2 + + QCommonStyle handles the CE_CheckBox element. The QCheckBox + has two sub elements: SE_CheckBoxIndicator (the checked indicator) + and SE_CheckBoxContents (the contents, which is used for the + checkbox label). QCommonStyle also implements these sub element + bounding rectangles. We have a look at the QCommonStyle code: + + \snippet doc/src/snippets/code/doc_src_styles.qdoc 3 + + As can be seen from the code extract, the common style gets + the bounding rectangles of the two sub elements of + CE_CheckBox, and then draws them. If the checkbox has focus, + the focus frame is also drawn. + + The java style draws CE_CheckBoxIndicator, while QCommonStyle + handles CE_CheckboxLabel. We will examine each implementation and + start with CE_CheckBoxLabel: + + \snippet doc/src/snippets/code/doc_src_styles.qdoc 4 + + \l{QStyle::}{visualAlignment()} adjusts the alignment of text + according to the layout direction. We then draw an icon if it + exists, and adjust the space left for the text. + \l{QStyle::}{drawItemText()} draws the text taking alignment, + layout direction, and the mnemonic into account. It also uses the + palette to draw the text in the right color. + + The drawing of labels often get somewhat involved. Luckily, it + can usually be handled by the base class. The java style + implements its own push button label since Java-contrary to + windows-center button contents also when the button has an icon. + You can examine that implementation if you need an example of + reimplementing label drawing. + + We take a look at the java implementation + of CE_CheckBoxIndicator in \c drawControl(): + + \snippet doc/src/snippets/javastyle.cpp 0 + + We first save the state of the painter. This is not always + necessary but in this case the QWindowsStyle needs the painter in + the same state as it was when PE_IndicatorCheckBox was called (We + could also set the state with function calls, of course). We then + use \c drawButtonBackground() to draw the background of the check + box indicator. This is a helper function that draws the background + and also the frame of push buttons and check boxes. We take a look + at that function below. We then check if the mouse is hovering + over the checkbox. If it is, we draw the frame java checkboxes + have when the box is not pressed down and the mouse is over it. + You may note that java does not handle tristate boxes, so we have + not implemented it. + + Here we use a png image for our indicator. We could also check + here if the widget is disabled. We would then have to use + another image with the indicator in the disabled color. + + \snippet doc/src/snippets/javastyle.cpp 1 + + We have seen how check boxes are styled in the java style from the + widget gets a paint request to the style is finished painting. To + learn in detail how each widget is painted, you need to go through + the code step-by-step as we have done here. However, it is + usually enough to know which style elements the widgets draw. The + widget builds a style option and calls on the style one or more + times to draw the style elements of which it consists. Usually, + it is also sufficient to know the states a widget can be in and the + other contents of the style option, i.e., what we list in the next + section. + + \section1 Widget Walkthrough + + In this section, we will examine how most of Qt's widgets are + styled. Hopefully, this will save you some time and effort while + developing your own styles and widgets. You will not find + information here that is not attainable elsewhere (i.e., by + examining the source code or the class descriptions for the style + related classes). + + We mostly use java style widgets as examples. The java style does not + draw every element in the element trees. This is because they are + not visible for that widget in the java style. We still make sure + that all elements are implemented in a way that conforms with the + java style as custom widgets might need them (this does not + exclude leaving implementations to QWindowsStyle though). + + The following is given for each widget: + + \list + \o A table with the members (variables, etc.) of its style option. + \o A table over the state flags (QStyle::StateFlag) that + can be set on the widget and when the states are set. + \o Its element tree (see section \l{The Style Elements}). + \o An image of the widget in which the elements are outlined. + \omit This is not written yet - probably never will be + either + \o List of style hints that should be checked for the + widget. + \o List of standard pixmaps that could be used by the + elements. + \endomit + \endlist + + The element tree contains the primitive, control, and complex + style elements. By doing a top-down traversal of the element tree, + you get the sequence in which the elements should be drawn. In the + nodes, we have written the sub element rectangles, sub control + elements, and pixel metrics that should be considered when drawing + the element of the node. + + Our approach on styling center on the drawing of the widgets. The + calculations of sub elements rectangles, sub controls, and pixel + metrics used \bold during drawing is only listed as contents in + the element trees. Note that there are rectangles and pixel + metrics that are only used by widgets. This leaves these + calculations untreated in the walkthrough. For instance, the + \l{QStyle::}{subControlRect()} and + \l{QStyle::}{sizeFromContents()} functions often call + \l{QStyle::}{subElementRect()} to calculate their bounding + rectangles. We could draw trees for this as well. However, how + these calculations are done is completely up to the individual + styles, and they do not have to follow a specific structure (Qt + does not impose a specific structure). You should still make sure + that you use the appropriate pixel metrics, though. To limit the + size of the document, we have therefore chosen not to include + trees or describe the calculations made by the Java (or any other) + style. + + You may be confused about how the different pixel metrics, sub + element rectangles, and sub control rectangles should be used when + examining the trees. If you are in doubt after reading the QStyle + enum descriptions, we suggest that you examine the QCommonStyle + and QWindowsStyle implementations. + + Some of the bounding rectangles that we outline in the widget + images are equal. Reasons for this are that some elements draw + backgrounds while others draw frames and labels. If in doubt, + check the description of each element in QStyle. Also, some + elements are there to layout, i.e., decide where to draw, other + elements. + + \section2 Common Widget Properties + + Some states and variables are common for all widgets. These are + set with QStyleOption::initFrom(). Not all elements use this function; + it is the widgets that create the style options, and for some + elements the information from \l{QStyleOption::}{initFrom()} is not + necessary. + + A table with the common states follows: + + \table 90% + \header + \o State + \o State Set When + \row + \o State_Enabled + \o Set if the widget is not disabled (see + QWidget::setEnabled()) + \row + \o State_Focus + \o Set if the widget has focus (see + QWidget::hasFocus()) + \row + \o State_KeyobordFocusChange + \o Set when the user changes focus with the keyboard + (see Qt::WA_KeyboardFocusChange) + \row + \o State_MouseOver + \o Set if the mouse cursor is over the widget + \row + \o State_Active + \o Set if the widget is a child of the active window. + \row + \o State_HasEditFocus + \o Set if the widget has the edit focus + \endtable + + The other common members for widgets are: + + \table 90% + \header + \o Member + \o Content + \row + \o rect + \o The bounding rectangle of the element to draw. This + is set to the widget bounding rectangle + (QWidget::rect()). + \row + \o direction + \o The layout direction; a value of the + Qt::LayoutDirection enum. + \row + \o palette + \o The QPalette to use when drawing the element. This + is set to the widgets palette (QWidget::palette()). + \row + \o fontMetrics + \o The QFontMetrics to use when drawing text on the + widget. + \endtable + + The complex style options (classes that inherit + QStyleOptionComplex) used for complex style elements share two + variables: \l{QStyleOptionComplex::}{subControls} and + \l{QStyleOptionComplex::}{activeSubControls}. Both variables are + an OR'ed combination of QStyle::SubControl enum values. They + indicate which sub controls the complex control consists of and + which of these controls are currently active. + + As mentioned, the style calculates the size of the widgets + contents, which the widgets calculate their size hints from. In + addition, complex controls also use the style to test which + sub-controls the mouse is over. + + \section2 Widget Reference + + Without further delay, we present the widget walkthrough; each + widget has its own sub-section. + + \section3 Push Buttons + + The style structure for push buttons is shown below. By doing a + top-down traversal of the tree, you get the sequence in which the + elements should be drawn. + + \image javastyle/pushbutton.png The style structure for push buttons + + The layout of the buttons, with regard element bounds, varies from + style to style. This makes it difficult to show conceptual images + of this. Also, elements may - even be intended to - have the same + bounds; the PE_PushButtonBevel, for instance, is used in + QCommonStyle to draw the elements that contains it: + PE_FrameDefaultButton, PE_FrameButtonBevel, and + PE_PanelButtonCommand, all of which have the same bounds in common + and windows style. PE_PushButtonBevel is also responsible for + drawing the menu indicator (QCommonStyle draws + PE_IndicatorArrowDown). + + An image of a push button in the java style that show the bounding + rectangles of the elements is given below. Colors are used to + separate the bounding rectangles in the image; they do not fill + any other purpose. This is also true for similar images for the + other widgets. + + \image javastyle/button.png + + The java style, as well as all other styles implemented in Qt, + does not use PE_FrameButtonBevel. It is usual that a button + with a PE_DefaultFrame adjusts the PE_PanelButtonCommand's + rectangle by PM_ButtonDefaultIndicator. The CE_PushButtonLabel + is found by adjusting the rect by PM_DefaultFrameWidth. + + We will now examine the style option for push + buttons - QStyleOptionButton. A table for the states that + QPushButton can set on the style option follows: + + \table 90% + \header + \o State + \o State Set When + \row + \o State_Sunken + \o Button is down or menu is pressed shown + \row + \o State_On + \o Button is checked + \row + \o State_Raised + \o Button is not flat and not pressed down + \endtable + + Other members of QStyleOptionButton is: + + \table 90% + \header + \o Member + \o Content + \row + \o features + \o Flags of the QStyleOptionButton::ButtonFeatures enum, + which describes various button properties (see enum) + \row + \o icon + \o The buttons QIcon (if any) + \row + \o iconSize + \o The QSize of the icon + \row + \o text + \o a QString with the buttons text + \endtable + + \section3 Check and Radio Buttons + + The structures for radio and check buttons are identical. + We show the structure using QCheckBox element and pixel + metric names: + + \image javastyle/checkbox.png + + QStyleOptionButton is used as the style option for both check + and radio buttons. We first give a table of the states that + can be set in the option: + + \table 90% + \header + \o State + \o State Set When + \row + \o State_sunken + \o The box is pressed down + \row + \o State_NoChange + \o The box is partially checked (for tristate + checkboxes.) + \row + \o State_On + \o The box is checked + \row + \o State_Off + \o The box is unchecked + \endtable + + See \l{Push Buttons} for a table over other members in the + QStyleOptionButtonClass. + + \section3 Tabs + + In Qt, QTabBar uses the style to draw its tabs. Tabs exist either + in a QTabWidget, which contains a QTabBar, or as a separate bar. + If the bar is not part of a tab widget, it draws its own base. + + QTabBar lays out the tabs, so the style does not have control over + tab placement. However, while laying out its tabs, the bar asks + the style for PM_TabBarTabHSpace and PM_TabBarTabVSpace, which is + extra width and height over the minimum size of the tab bar tab + label (icon and text). The style can also further influence the + tab size before it is laid out, as the tab bar asks for + CT_TabBarTab. The bounding rectangle of the bar is decided by the + tab widget when it is part of the widget (still considering + CT_TabBarTab). + + The tab bar is responsible for drawing the buttons that appear on + the tab bar when all tabs do not fit. Their placement is not + controlled by the style, but the buttons are \l{QToolButton}s + and are therefore drawn by the style. + + Here is the style structure for QTabWidget and QTabBar: + + \image javastyle/tab.png + + The dotted lines indicate that the QTabWidget contains a tab bar, + but does not draw it itself, that QTabBar only draws its base line + when not part of a tab widget, and that the tab bar keeps two tool + buttons that scroll the bar when all tabs do not fit; see \l{Tool + Buttons} for their element tree. Also note that since the buttons + are children of the tab bar, they are drawn after the bar. The + tabs bounding rectangles overlap the base by PM_TabBarBaseOverlap. + + Here is a tab widget in the java style: + + \image javastyle/tabwidget.png + + In the java style (and also windows), the tab bar shape and label + have the same bounding rectangle as CE_TabBarTab. Notice that the + tabs overlap with the tab widget frame. The base of the tab bar + (if drawn) is the area where the tabs and frame overlap. + + The style option for tabs (QStyleOptionTab) contains the necessary + information for drawing tabs. The option contains the position of + the tab in the tab bar, the position of the selected tab, the + shape of the tab, the text, and icon. After Qt 4.1 the option + should be cast to a QStyleOptionTabV2, which also contains the + icons size. + + As the java style tabs don't overlap, we also present an image of + a tab widget in the windows style. Note that if you want the tabs + to overlap horizontally, you do that when drawing the tabs in + CE_TabBarTabShape; the tabs bounding rectangles will not be + altered by the tab bar. The tabs are drawn from left to right in a + north tab bar shape, top to bottom in an east tab bar shape, etc. + The selected tab is drawn last, so that it is easy to draw it over + the other tabs (if it is to be bigger). + + \image javastyle/windowstabimage.png + + A table of the states a tab bar can set on its tabs follows: + + \table 90% + \header + \o State + \o State Set When + \row + \o State_Sunken + \o The tab is pressed on with the mouse. + \row + \o State_Selected + \o If it is the current tab. + \row + \o State_HasFocus + \o The tab bar has focus and the tab is selected + \endtable + + Note that individual tabs may be disabled even if the tab bar + is not. The tab will be active if the tab bar is active. + + Here follows a table of QStyleOptionTabV2's members: + + \table 90% + \header + \o Member + \o Content + \row + \o cornerWidgets + \o Is flags of the CornerWidget enum, which indicate + if and which corner widgets the tab bar has. + \row + \o icon + \o The QIcon of the tab + \row + \o iconSize + \o The QSize of the icon + \row + \o position + \o A TabPosition enum value that indicates the tabs + position on the bar relative to the other tabs. + \row + \o row + \o holds which row the tab is in + \row + \o selectedPosition + \o A value of the SelectedPosition enum that indicates + whether the selected tab is adjacent to or is the + tab. + \row + \o shape + \o A value of the QTabBar::Shape enum indication + whether the tab has rounded or triangular corners + and the orientation of the tab. + \row + \o text + \o The tab text + \endtable + + The frame for tab widgets use QStyleOptionTabWidgetFrame as + style option. We list its members here. It does not have + states set besides the common flags. + + \table 90% + \header + \o Member + \o content + \row + \o leftCornerWidgetSize + \o The QSize of the left corner widget (if any). + \row + \o rightCornerWidgetSize + \o The QSize of the right corner widget (if any). + \row + \o lineWidth + \o holds the line with for drawing the panel. + \row + \o midLineWith + \o this value is currently always 0. + \row + \o shape + \o The shape of the tabs on the tab bar. + \row + \o tabBarSize + \o The QSize of the tab bar. + \endtable + + \section3 Scroll Bars + + Here is the style structure for scrollBars: + + \image javastyle/scrollbar.png + + QScrollBar simply creates its style option and then draws + CC_ScrollBar. Some styles draw the background of add page and sub + page with PE_PanelButtonBevel and also use indicator arrows to + draw the arrows in the nest and previous line indicators; we have + not included these in the tree as their use is up to the + individual style. The style's PM_MaximumDragDistance is the + maximum distance in pixels the mouse can move from the bounds + of the scroll bar and still move the handle. + + Here is an image of a scrollbar in the java style: + + \image javastyle/scrollbarimage.png + + You may notice that the scrollbar is slightly different from + Java's as it has two line up indicators. We have done this to show + how that you can have two separate bounding rectangles for a + single sub control. The scroll bar is an example of a widget that + is entirely implemented by the java style - neither QWindowsStyle + nor QCommonStyle are involved in the drawing. + + We have a look at the different states a scroll bar can set on + the style option: + + \table 90% + \header + \o State + \o State Set When + \row + \o State_Horizontal + \o The scroll bar is horizontal + \endtable + + The style option of QScrollBar is QStyleOptionSlider. Its + members are listed in the following table. The option is used + by all \l{QAbstractSlider}s; we only describe the members + relevant for scroll bars here. + + \table 90% + \header + \o Member + \o Content + \row + \o maximum + \o the maximum value of the scroll bar + \row + \o minimum + \o the minimum value of the scroll bar + \row + \o notchTarget + \o the number of pixels between notches + \row + \o orientation + \o a value of the Qt::Orientation enum that specifies + whether the scroll bar is vertical or horizontal + \row + \o pageStep + \o the number to increase or decrease the sliders + value (relative to the size of the slider and its value + range) on page steps. + \row + \o singleStep + \o the number to increase or decrease the sliders + value on single (or line) steps + \row + \o sliderValue + \o The value of the slider + \row + \o sliderPosition + \o the position of the slider handle. This is the same + as \c sliderValue if the scroll bar is + QAbstractSlider::tracking. If not, the scroll + bar does not update its value before the mouse + releases the handle. + \row + \o upsideDown + \o holds the direction in which the scroll bar + increases its value. This is used instead of + QStyleOption::direction for all abstract sliders. + \endtable + + \section3 Sliders + + When calculating the sliders size hint, PM_SliderTickness and + PM_SliderLength is queried from the style. As with scroll bars, + the QSlider only lets the user move the handle if the mouse is + within PM_MaximumDragDistance from the slider bounds. When it + draws itself it creates the style option and calls \c + drawComplexControl() with CC_Slider: + + \image javastyle/slider.png + + We also show a picture of a slider in the java style. We show + the bounding rectangles of the sub elements as all drawing is done + in CC_Slider. + + \image javastyle/sliderimage.png + + QSlider uses QStyleOptionSlider as all \l{QAbstractSlider}s do. We + present a table with the members that affect QSlider: + + \table 90% + \header + \o Member + \o Content + \row + \o maximum + \o the maximum value of the slider + \row + \o minimum + \o the minimum value of the slider + \row + \o notchTarget + \o this is the number of pixels between each notch + \row + \o orientation + \o a Qt::Orientation enum value that gives whether the + slider is vertical or horizontal. + \row + \o pageStep + \o a number in slider value to increase or decrease + for page steps + \row + \o singleStep + \o the number to increase or decrease the sliders + value on single (or line) steps. + \row + \o sliderValue + \o the value of the slider. + \row + \o sliderPosition + \o the position of the slider given as a slider value. + This will be equal to the \c sliderValue if the + slider is \l{QAbstractSlider::}{tracking}; if + not, the sliders value will not change until the handle is + released with the mouse. + \row + \o upsideDown + \o this member is used instead of QStyleOption::direction + for all abstract sliders. + \endtable + + You should note that the slider does not use direction for + reverse layouts; it uses \c upsideDown. + + \section3 Spin Boxes + + When QSpinBox paints itself it creates a QStyleOptionSpinBox and + asks the style to draw CC_SpinBox. The edit field is a line + edit that is a child of the spin box. The dimensions of the + field is calculated by the style with SC_SpinBoxEditField. + + Here follows the style tree for spin boxes. It is not + required that a style uses the button panel primitive to paint + the indicator backgrounds. You can see an image below the tree + showing the sub elements in QSpinBox in the java style. + + \image javastyle/spinbox.png + + \image javastyle/spinboximage.png + + The QStyleOptionSpinBox, which is the style option for spin + boxes. It can set the following states on the spin box.: + + \table 90% + \header + \o State + \o State Set When + \row + \o State_Sunken + \o Is set if one of the sub controls CC_SpinUp or + CC_SpinDown is pressed on with the mouse. + \endtable + + The rest of the members in the spin boxes style options are: + + \table 90% + \header + \o Property + \o Function + \row + \o frame + \o boolean that is true if the spin box is to draw a + frame. + \row + \o buttonSymbols + \o Value of the ButtonSymbols enum that decides the + symbol on the up/down buttons. + \row + \o stepEnabled + \o A value of the StepEnabled indication which of the + spin box buttons are pressed down. + \endtable + + \section3 Title Bar + + The title bar complex control, CC_TitleBar, is used to draw + the title bars of internal windows in QMdiArea. It typically + consists of a window title and close, minimize, system menu, and + maximize buttons. Some styles also provide buttons for shading + the window, and a button for context sensitive help. + + The bar is drawn in CC_TitleBar without using any sub elements. + How the individual styles draw their buttons is individual, but + there are standard pixmaps for the buttons that the style should + provide. + + \image javastyle/titlebar.png + + In an image over a title bar in the java style, we show the + bounding rectangles of the sub elements supported by the java style + (all of which are drawn with standard pixmaps). It is usual to + draw the button backgrounds using PE_PanelButtonTool, but it's no + rule. + + \image javastyle/titlebarimage.png + + The style option for title bars is QStyleOptionTitleBar. It's + members are: + + \table 90% + \header + \o Member + \o Content + \row + \o icon + \o The title bars icon + \row + \o text + \o the text for the title bar's label + \row + \o windowFlags + \o flags of the Qt::WindowFlag enum. The window flags + used by QMdiArea for window management. + \row + \o titleBarState + \o this is the QWidget::windowState() of the window + that contains the title bar. + \endtable + + \section3 Combo Box + + A QComboBox uses the style to draw the button and label of + non-editable boxes with CC_ComboBox and CE_ComboBoxLabel. + + The list that pops up when the user clicks on the combo box is + drawn by a \l{Delegate Classes}{delegate}, which we do not cover + in this overview. You can, however, use the style to control the + list's size and position with the sub element + SC_ComboBoxListBoxPopup. The style also decides where the edit + field for editable boxes should be with SC_ComboBoxEditField; the + field itself is a QLineEdit that is a child of the combo box. + + \image javastyle/combobox.png + + We show an image over a java style combo box in which we have + outlined its sub elements and sub element rectangles: + + \image javastyle/comboboximage.png + + Java combo boxes do not use the focus rect; it changes its + background color when it has focus. The SC_ComboBoxEdit field is + used both by QComboBox to calculate the size of the edit field and + the style for calculating the size of the combo box label. + + The style option for combo boxes is QStyleOptionComboBox. It + can set the following states: + + \table 90% + \header + \o State + \o Set When + \row + \o State_Selected + \o The box is not editable and has focus + \row + \o State_Sunken + \o SC_ComboBoxArrow is active + \row + \o State_on + \o The container (list) of the box is visible + \endtable + + The style options other members are: + + \table + \header + \o Member + \o Content + \row + \o currentIcon + \o the icon of the current (selected) item of the + combo box. + \row + \o currentText + \o the text of the current item in the box. + \row + \o editable + \o holds whether the combo box is editable or not + \row + \o frame + \o holds whether the combo box has a frame or not + \row + \o iconSize + \o the size of the current items icon. + \row + \o popupRect + \o the bounding rectangle of the combo box's popup + list. + \endtable + + \section3 Group Boxes + + When calculating the size hint, QGroupBox fetches three pixel + metrics from the style: PM_IndicatorWidth, + PM_CheckBoxLabelSpacing, and PM_IndicatorHeight. QGroupBox has + the following style element tree: + + \image javastyle/groupbox.png + + Qt does not impose restrictions on how the check box is drawn; the + java style draws it with CE_IndicatorCheckBox. See \l{Check and + Radio Buttons} for the complete tree. + + We also give an image of the widget with the sub controls and + sub control rectangles drawn: + + \image javastyle/groupboximage.png + + The style option for group boxes are QStyleOptionGroupBox. The + following states can be set on it: + + \table 90% + \header + \o State + \o Set When + \row + \o State_On + \o The check box is checked + \row + \o State_Sunken + \o The checkbox is pressed down + \row + \o State_Off + \o The check box is unchecked (or there is no check box) + \endtable + + The remaining members of QStyleOptionGroupBox are: + + \table + \header + \o Member + \o Content + \row + \o features + \o flags of the QStyleOptionFrameV2::FrameFeatures + enum describing the frame of the group box. + \row + \o lineWidth + \o the line width with which to draw the panel. This + is always 1. + \row + \o text + \o the text of the group box. + \row + \o textAlignment + \o the alignment of the group box title + \row + \o textColor + \o the QColor of the text + \endtable + + \section3 Splitters + + As the structure of splitters are simple and do not contain any + sub elements, we do not include image of splitters. CE_Splitter + does not use any other elements or metrics. + + For its style option, Splitters uses the base class QStyleOption. + It can set the following state flags on it: + + \table 90% + \header + \o State + \o Set When + \row + \o State_Horizontal + \o Set if it is a horizontal splitter + \endtable + + QSplitter does not use \l{QStyleOption::}{initFrom()} to set up its + option; it sets the State_MouseOver and State_Disabled flags + itself. + + \section3 Progress Bar + + The CE_ProgressBar element is used by QProgressBar, and it is the + only element used by this widget. We start with looking at the + style structure: + + \image javastyle/progressbar.png + + Here is a progress bar in the windows style (the java style + bounding rectangles are equal): + + \image javastyle/progressbarimage.png + + The style option for QProgressBar is QStyleOptionProgressBarV2. + The bar does not set any state flags, but the other members of the + option are: + + \table 90% + \header + \o Member + \o Content + \row + \o minimum + \o The minimum value of the bar + \row + \o maximum + \o The maximum value of the bar + \row + \o progress + \o The current value of the bar + \row + \o textAlignment + \o How the text is aligned in the label + \row + \o textVisible + \o Whether the label is drawn + \row + \o text + \o The label text + \row + \o orientation + \o Progress bars can be vertical or horizontal + \row + \o invertedAppearance + \o The progress is inverted (i.e., right to left in a + horizontal bar) + \row + \o bottomToTop + \o Boolean that if true, turns the label of vertical + progress bars 90 degrees. + \endtable + + \section3 Tool Buttons + + Tool buttons exist either independently or as part of tool bars. + They are drawn equally either way. The QToolButton draws only one + style element: CC_ToolButton. + + As you must be used to by now (at least if you have read this + document sequentially), we have a tree of the widget's style + structure: + + \image javastyle/toolbutton.png + + Note that PE_FrameButtonTool and PE_IndicatorArrowDown are + included in the tree as the java style draws them, but they can + safely be omitted if you prefer it. The structure may also be + different. QWindowsStyle, for instance, draws both + PE_IndicatorButtonDropDown and PE_IndicatorArrowDown in + CE_ToolButton. + + We also have an image of a tool button where we have outlined + the sub element bounding rectangles and sub controls. + + \image javastyle/toolbuttonimage.png + + Here is the states table for tool buttons: + + \table 90% + \header + \o State + \o Set When + \row + \o State_AutoRise + \o the tool button has the autoRise property set + \row + \o State_raised + \o the button is not sunken (i.e., by being checked or + pressed on with the mouse). + \row + \o State_Sunken + \o the button is down + \row + \o State_On + \o the button is checkable and checked. + \endtable + + QStyleOptionToolButton also contains the following members: + + \table + \header + \o Member + \o Content + \row + \o arrowType + \o a Qt::ArrowType enum value, which contains the + direction of the buttons arrow (if an arrow is to + be used in place of an icon) + \row + \o features + \o flags of the QStyleOptionToolButton::ButtonFeature + enum describing if the button has an arrow, a menu, + and/or has a popup-delay. + \row + \o font + \o the QFont of the buttons label + \row + \o icon + \o the QIcon of the tool button + \row + \o iconSize + \o the icon size of the button's icon + \row + \o pos + \o the position of the button, as given by + QWidget::pos() + \row + \o text + \o the text of the button + \row + \o toolButtonStyle + \o a Qt::ToolButtonStyle enum value which decides + whether the button shows the icon, the text, or both. + \endtable + + \section3 Toolbars + + Toolbars are part of the \l{QMainWindow}{main window framework} + and cooperates with the QMainWindow to which it belongs while it + builds its style option. A main window has 4 areas that toolbars + can be placed in. They are positioned next to the four sides of + the window (i.e., north, south, west, and east). Within each area + there can be more than one line of toolbars; a line consists of + toolbars with equal orientation (vertical or horizontal) placed + next to each other. + + \l{QToolbar}{QToolbar}s in Qt consists of three elements + CE_ToolBar, PE_IndicatorToolBarHandle, and + PE_IndicatorToolBarSeparator. It is QMainWindowLayout that + calculates the bounding rectangles (i.e., position and size of the + toolbars and their contents. The main window also uses the \c + sizeHint() of the items in the toolbars when calculating the size + of the bars. + + Here is the element tree for QToolBar: + + \image javastyle/toolbar.png + + The dotted lines indicate that the QToolBar keeps an instance of + QToolBarLayout and that QToolBarSeparators are kept by + QToolBarLayout. When the toolbar is floating (i.e., has its own + window) the PE_FrameMenu element is drawn, else QToolbar draws + CE_ToolBar. + + Here is an image of a toolbar in the java style: + + \image javastyle/toolbarimage.png + + QToolBarSaparator uses QStyleOption for their style option. It + sets the State_horizontal flag if the toolbar they live in is + horizontal. Other than that, they use \l{QStyleOption::}{initFrom()}. + + The style option for QToolBar is QStyleOptionToolBar. The only + state flag set (besides the common flags) is State_Horizontal + if the bar is horizontal (i.e., in the north or south toolbar area). + The member variables of the style option are: + + \table 90% + \header + \o Member + \o Content + \row + \o features + \o Holds whether the bar is movable in a value of the + ToolBarFeature, which is either Movable or None. + \row + \o lineWidth + \o The width of the tool bar frame. + \row + \o midLineWidth + \o This variable is currently not used and is always + 0. + \row + \o positionOfLine + \o The position of the toolbar line within the toolbar + area to which it belongs. + \row + \o positionWithinLine + \o The position of the toolbar within the toolbar line. + \row + \o toolBarArea + \o The toolbar area in which the toolbar lives. + \endtable + + \section3 Menus + + Menus in Qt are implemented in QMenu. The QMenu keeps a list of + action, which it draws as menu items. When QMenu receives paint + events ,it calculates the size of each menu item and draws them + individually with CE_MenuItem. (Menu items do not have a separate + element for their label (contents), so all drawing is done in + CE_MenuItem. The menu also draws the frame of the menu with + PE_FrameMenu. It also draws CE_MenuScroller if the style supports + scrolling. CE_MenuTearOff is drawn if the menu is to large for its + bounding rectangle. + + In the style structure tree, we also include QMenu as it also does + styling related work. The bounding rectangles of menu items are + calculated for the menus size hint and when the menu is displayed + or resized. + + \image javastyle/menu.png + + The CE_MenuScroller and CE_MenuTearOff elements are handled by + QCommonStyle and are not shown unless the menu is to large to fit + on the screen. PE_FrameMenu is only drawn for pop-up menus. + + QMenu calculates rectangles based on its actions and calls + CE_MenuItem and CE_MenuScroller if the style supports that. + + It is also usual to use PE_IndicatorCheckBox (instead of using + PE_IndicatorMenuCheckMark) and PE_IndicatorRadioButton for drawing + checkable menu items; we have not included them in the style tree + as this is optional and varies from style to style. + + \image javastyle/menuimage.png + + The style option for menu items is QStyleOptionMenuItem. The + following tables describe its state flags and other members. + + \table 90% + \header + \o State + \o Set When + \row + \o State_Selected + \o The mouse is over the action and the action is not + a separator. + \row + \o State_Sunken + \o The mouse is pressed down on the menu item. + \row + \o State_DownArrow + \o Set if the menu item is a menu scroller and it scrolls + the menu downwards. + \endtable + + \table 90% + \header + \o Member + \o Content + \row + \o checkType + \o A value of the \l{QStyleOptionMenuItem::}{CheckType} enum, + which is either NotCheckable, Exclusive, or + NonExclusive. + \row + \o checked + \o Boolean that is true if the menu item is checked. + \row + \o font + \o The QFont to use for the menu item's text. + \row + \o icon + \o the QIcon of the menu item. + \row + \o maxIconWidth + \o The maximum width allowed for the icon + \row + \o menuHasChecableItem + \o Boolean which is true if at least one item in the + menu is checkable. + \row + \o menuItemType + \o The type of the menu item. This a value of the + \l{QStyleOptionMenuItem::}{MenuItemType}. + \row + \o menuRect + \o The bounding rectangle for the QMenu that the menu + item lives in. + \row + \o tabWidth + \o This is the distance between the text of the menu + item and the shortcut. + \row + \o text + \o The text of the menu item. + \endtable + + The setup of the style option for CE_MenuTearOff and + CE_MenuScroller also uses QStyleOptionMenuItem; they only set the + \c menuRect variable in addition to the common settings with + QStyleOption's \l{QStyleOption::}{initFrom()}. + + \section3 Menu Bar + + QMenuBar uses the style to draw each menu bar item and the empty + area of the menu bar. The pull-down menus themselves are + \l{QMenu}s (see \l{Menus}). The style element tree for the menu + bar follows: + + \image javastyle/menubar.png + + The panel and empty area is drawn after the menu items. The + QPainter that the QMenuBar sends to the style has the bounding + rectangles of the items clipped out (i.e., clip region), so you + don't need to worry about drawing over the items. The pixel + metrics in QMenuBar is used when the bounding rectangles of the + menu bar items are calculated. + + \image javastyle/menubarimage.png + + QStyleOptionMenuItem is used for menu bar items. The members that + are used by QMenuBar is described in the following table: + + \table + \header + \o Member + \o Content + \row + \o menuRect + \o the bounding rectangle of the entire menu bar to + which the item belongs. + \row + \o text + \o the text of the item + \row + \o icon + \o the icon of the menu item (it is not common that + styles draw this icon) + \endtable + + QStyleOptionMenuItem is also used for drawing CE_EmptyMenuBarArea. + + QStyleOptionFrame is used for drawing the panel frame The + \l{QStyleOptionFrame::}{lineWidth} is set to PM_MenuBarPanelWidth. + The \l{QStyleOptionFrame::}{midLineWidth} is currently always set + to 0. + + \section3 Item View Headers + + It is the style that draws the headers of Qt's item views. The + item views keeps the dimensions on individual sections. Also + note that the delegates may use the style to paint decorations + and frames around items. QItemDelegate, for instance, draws + PE_FrameFocusRect and PE_IndicatorViewItemCheck. + + \image javastyle/header.png + + Here is a QTableWidget showing the bounding rects of a Java + header: + + \image javastyle/headerimage.png + + The QHeaderView uses CT_HeaderSection, PM_HeaderMargin and + PM_HeaderGripMargin for size and hit test calculations. The + PM_HeaderMarkSize is currently not used by Qt. QTableView draws + the button in the top-left corner (i.e., the area where the + vertical and horizontal headers intersect) as a CE_Header. + + The style option for header views is QStyleOptionHeader. The view + paints one header section at a time, so the data is for the + section being drawn. Its contents are: + + \table 90% + \header + \o Member + \o Content + \row + \o icon + \o the icon of the header (for section that is being + drawn). + \row + \o iconAlignment + \o the alignment (Qt::Alignment) of the icon in the header. + \row + \o orientation + \o a Qt::Orientation value deciding whether the header + is the horizontal header above the view or the + vertical header on the left. + \row + \o position + \o a QStyleOptionHeader::SectionPosition value + giving the header section's position relative to + the other sections. + \row + \o section + \o holds the section that is being drawn. + \row + \o selectedPosition + \o a QStyleOptionHeader::SelectedPosition value giving + the selected section's position relative to the + section that is being painted. + \row + \o sortIndicator + \o a QStyleOptionHeader::SortIndicator value that + describes the direction in which the section's sort + indicator should be drawn. + \row + \o text + \o the text of the currently drawn section. + \row + \o textAlignment + \o the Qt::Alignment of the text within the + headersection. + \endtable + + \section3 Tree Branch Indicators + + The branch indicators in a tree view is drawn by the style with + PE_IndicatorBranch. We think of indicators here as the indicators + that describe the relationship of the nodes in the tree. The + generic QStyleOption is sent to the style for drawing this + elements. The various branch types are described by states. Since + there are no specific style option, we simply present the states + table: + + \table 90% + \header + \o State + \o Set When + \row + \o State_Sibling + \o the node in the tree has a sibling (i.e., there is + another node in the same column). + \row + \o State_Item + \o this branch indicator has an item. + \row + \o State_Children + \o the branch has children (i.e., a new sub-tree can + be opened at the branch). + \row + \o State_Open + \o the branch indicator has an opened sub-tree. + \endtable + + The tree view (and tree widget) use the style to draw the branches + (or nodes if you will) of the tree. + + QStyleOption is used as the style for PE_IndicatorBranch has state + flags set depending on what type of branch it is. + + Since there is no tree structure for branch indicators, we only + present an image of a tree in the java style. Each state is marked + in the image with a rectangle in a specific color (i.e., these + rectangles are not bounding rectangles). All combinations of + states you must be aware of are represented in the image. + + \image javastyle/branchindicatorimage.png + + \section3 Tool Boxes + + PM_SmallIconSize for sizeHints. + + QToolBox is a container that keeps a collection of widgets. It has + one tab for each widget and display one of them at a time. The + tool box lays the components it displays (the tool box buttons + and selected widget) in a QVBoxLayout. The style tree for tool + boxes looks like this: + + \image javastyle/toolbox.png + + We show an image of a tool box in the Plastique style: + + \image javastyle/toolboximage.png + + All elements have the same bounding rectangles in the + Plastique as well as the other Qt built-in styles. + + The style option for tool boxes is QStyleOptionToolBox. It + contains the text and icon of the tool box contents. The only + state set by QToolBox is State_Sunken, which is set when the user + presses a tab down with the mouse. The rest of the + QStyleOptionToolBox members are: + + \table 90% + \header + \o Member + \o Content + \row + \o icon + \o the icon on the toolbox tab + \row + \o text + \o the text on the toolbox tab + \endtable + + \section3 Size Grip + + The size grip calculates its size hint with CT_SizeGrip. The pixel + metric PM_SizeGripSize is currently unused by Qt. The element tree + for and an image in the Plastique style of QSizeGrip follows: + + \image javastyle/sizegrip.png + + \image javastyle/sizegripimage.png + + We show the size grip in a \l{QMainWindow}'s bottom right + corner. + + The size grip style option, QStyleOptionSizeGrip, have one + member except the common members from QStyleOption: + + \table 90% + \header + \o Member + \o Content + \row + \o corner + \o a Qt::Corner value that describe which corner in a + window (or equivalent) the grip is located. + \endtable + + \section3 Rubber Band + + The \l{QRubberBand}'s style tree consists of two nodes. + + \image javastyle/rubberband.png + + We present an image of a Java style window being moved in a + QMdiArea with a rubber band: + + \image javastyle/rubberbandimage.png + + The style option for rubber bands is QStyleOptionRubberBand. + Its members are: + + \table + \header + \o Member + \o Content + \row + \o opaque + \o boolean that is true if the rubber band must be + drawn in an opaque style (i.e., color) + \row + \o shape + \o a QRubberBand::Shape enum value that holds the + shape of the band (which is either a rectangle or a + line) + \endtable + + \section3 Dock Widgets + + When the dock widget lays out its contents it asks the style for + these pixel metrics: PM_DockWidgetSeparatorExtent, + PM_DockWidgetTitleBarButtonMargin, PM_DockWidgetFrameWidth, and + PM_DockWidgetTitleMargin. It also calculates the bounding + rectangles of the float and close buttons with + SE_DockWidgetCloseButton and SE_DockWidgetFloatButton. + + \image javastyle/dockwidget.png + + The dotted lines indicate that the sender keeps instances of the + recipient of the arrow (i.e., it is not a style element to draw). + The dock widget only draws PE_frameDockWidget when it is detached + from its main window (i.e., it is a top level window). If it is + docked it draws the indicator dock widget resize handle. We show a + dock widget in both docked and floating state in the plastique + style: + + \image javastyle/dockwidgetimage.png + + The style option is QStyleOptionDockWidget: + + \table 90% + \header + \o Member + \o Content + \row + \o closeable + \o boolean that holds whether the dock window can be + closed + \row + \o floatable + \o boolean that holds whether the dock window can + float (i.e., detach from the main window in which + it lives) + \row + \o movable + \o boolean that holds whether the window is movable + (i.e., can move to other dock widget areas) + \row + \o title + \o the title text of the dock window + \endtable + + For the buttons, QStyleOptionButton is used (see \l{Tool Buttons} + for content description). The dock widget resize handle has a + plain QStyleOption. +*/ |