diff options
Diffstat (limited to 'doc/src')
| -rw-r--r-- | doc/src/declarative/globalobject.qdoc | 244 | ||||
| -rw-r--r-- | doc/src/declarative/qtdeclarative.qdoc | 2 |
2 files changed, 2 insertions, 244 deletions
diff --git a/doc/src/declarative/globalobject.qdoc b/doc/src/declarative/globalobject.qdoc index bd0a9f5..2885dd5 100644 --- a/doc/src/declarative/globalobject.qdoc +++ b/doc/src/declarative/globalobject.qdoc @@ -49,251 +49,9 @@ Contains all the properties of the JavaScript global object, plus: \section1 Qt Object -The Qt object provides useful enums and functions from Qt, for use in all QML +The \l{qt-qml.html}{Qt object} provides useful enums and functions from Qt, for use in all QML files. -\section2 Enums -The Qt object contains all enums in the Qt namespace. For example, you can -access the AlignLeft member of the Qt::AlignmentFlag enum with \c Qt.AlignLeft. - -For a full list of enums, see the \l{Qt Namespace} documentation. - -\section2 Types -The Qt object also contains helper functions for creating objects of specific -data types. This is primarily useful when setting the properties of an item -when the property has one of the following types: - -\list -\o Color -\o Rect -\o Point -\o Size -\o Vector3D -\endlist - -There are also string based constructors for these types, see \l{qdeclarativebasictypes.html}{Qml Types}. - -\section3 Qt.rgba(qreal red, qreal green, qreal blue, qreal alpha) -This function returns a Color with the specified \c red, \c green, \c blue and \c alpha components. All components should be in the range 0-1 inclusive. - -\section3 Qt.hsla(qreal hue, qreal saturation, qreal lightness, qreal alpha) -This function returns a Color with the specified \c hue, \c saturation, \c lightness and \c alpha components. All components should be in the range 0-1 inclusive. - -\section3 Qt.rect(int x, int y, int width, int height) -This function returns a Rect with the top-left corner at \c x, \c y and the specified \c width and \c height. -\section3 Qt.point(int x, int y) -This function returns a Point with the specified \c x and \c y coordinates. -\section3 Qt.size(int width, int height) -This function returns as Size with the specified \c width and \c height. -\section3 Qt.vector3d(real x, real y, real z) -This function returns a Vector3D with the specified \c x, \c y and \c z. - -\section2 Formatters -The Qt object contains several functions for formatting dates and times. - -\section3 Qt.formatDate(datetime date, variant format) -This function returns the string representation of \c date, formatted according to \c format. -\section3 Qt.formatTime(datetime time, variant format) -This function returns the string representation of \c time, formatted according to \c format. -\section3 Qt.formatDateTime(datetime dateTime, variant format) -This function returns the string representation of \c dateTime, formatted according to \c format. - -\c format for the above formatting functions can be specified as follows. - - These expressions may be used for the date: - - \table - \header \i Expression \i Output - \row \i d \i the day as number without a leading zero (1 to 31) - \row \i dd \i the day as number with a leading zero (01 to 31) - \row \i ddd - \i the abbreviated localized day name (e.g. 'Mon' to 'Sun'). - Uses QDate::shortDayName(). - \row \i dddd - \i the long localized day name (e.g. 'Monday' to 'Qt::Sunday'). - Uses QDate::longDayName(). - \row \i M \i the month as number without a leading zero (1-12) - \row \i MM \i the month as number with a leading zero (01-12) - \row \i MMM - \i the abbreviated localized month name (e.g. 'Jan' to 'Dec'). - Uses QDate::shortMonthName(). - \row \i MMMM - \i the long localized month name (e.g. 'January' to 'December'). - Uses QDate::longMonthName(). - \row \i yy \i the year as two digit number (00-99) - \row \i yyyy \i the year as four digit number - \endtable - - These expressions may be used for the time: - - \table - \header \i Expression \i Output - \row \i h - \i the hour without a leading zero (0 to 23 or 1 to 12 if AM/PM display) - \row \i hh - \i the hour with a leading zero (00 to 23 or 01 to 12 if AM/PM display) - \row \i m \i the minute without a leading zero (0 to 59) - \row \i mm \i the minute with a leading zero (00 to 59) - \row \i s \i the second without a leading zero (0 to 59) - \row \i ss \i the second with a leading zero (00 to 59) - \row \i z \i the milliseconds without leading zeroes (0 to 999) - \row \i zzz \i the milliseconds with leading zeroes (000 to 999) - \row \i AP - \i use AM/PM display. \e AP will be replaced by either "AM" or "PM". - \row \i ap - \i use am/pm display. \e ap will be replaced by either "am" or "pm". - \endtable - - All other input characters will be ignored. Any sequence of characters that - are enclosed in singlequotes will be treated as text and not be used as an - expression. Two consecutive singlequotes ("''") are replaced by a singlequote - in the output. - - Example format strings (assumed that the date and time is 21 May 2001 - 14:13:09): - - \table - \header \i Format \i Result - \row \i dd.MM.yyyy \i 21.05.2001 - \row \i ddd MMMM d yy \i Tue May 21 01 - \row \i hh:mm:ss.zzz \i 14:13:09.042 - \row \i h:m:s ap \i 2:13:9 pm - \endtable - -If no format is specified the locale's short format is used. Alternatively, you can specify -\c Qt.DefaultLocaleLongDate to get the locale's long format. - -\section2 Functions -The Qt object also contains the following miscellaneous functions which expose Qt functionality for use in QML. - -\section3 Qt.lighter(color baseColor, real factor) -This function returns a color lighter than \c baseColor by the \c factor provided. - -If the factor is greater than 1.0, this functions returns a lighter color. -Setting factor to 1.5 returns a color that is 50% brighter. If the factor is less than 1.0, -the return color is darker, but we recommend using the Qt.darker() function for this purpose. -If the factor is 0 or negative, the return value is unspecified. - -The function converts the current RGB color to HSV, multiplies the value (V) component -by factor and converts the color back to RGB. - -If \c factor is not supplied, returns a color 50% lighter than \c baseColor (factor 1.5). - -\section3 Qt.darker(color baseColor, real factor) -This function returns a color darker than \c baseColor by the \c factor provided. - -If the factor is greater than 1.0, this function returns a darker color. -Setting factor to 3.0 returns a color that has one-third the brightness. -If the factor is less than 1.0, the return color is lighter, but we recommend using -the Qt.lighter() function for this purpose. If the factor is 0 or negative, the return -value is unspecified. - -The function converts the current RGB color to HSV, divides the value (V) component -by factor and converts the color back to RGB. - -If \c factor is not supplied, returns a color 50% darker than \c baseColor (factor 2.0). - -\section3 Qt.tint(color baseColor, color tintColor) - This function allows tinting one color with another. - - The tint color should usually be mostly transparent, or you will not be able to see the underlying color. The below example provides a slight red tint by having the tint color be pure red which is only 1/16th opaque. - - \qml - Rectangle { x: 0; width: 80; height: 80; color: "lightsteelblue" } - Rectangle { x: 100; width: 80; height: 80; color: Qt.tint("lightsteelblue", "#10FF0000") } - \endqml - \image declarative-rect_tint.png - - Tint is most useful when a subtle change is intended to be conveyed due to some event; you can then use tinting to more effectively tune the visible color. - -\section3 Qt.openUrlExternally(url target) -This function attempts to open the specified \c target url in an external application, based on the user's desktop preferences. It will return true if it succeeds, and false otherwise. - -\section3 Qt.md5(data) -This function returns a hex string of the md5 hash of \c data. - -\section3 Qt.btoa(data) -Binary to ASCII - this function returns a base64 encoding of \c data. - -\section3 Qt.atob(data) -ASCII to binary - this function returns a base64 decoding of \c data. - -\section3 Qt.quit() -This function causes the QDeclarativeEngine::quit() signal to be emitted. -Within the \l {Qt Declarative UI Runtime}{qml} application this causes the -launcher application to exit. - -\section3 Qt.resolvedUrl(url) -This function returns \c url resolved relative to the URL of the -caller. - -\section3 Qt.fontFamilies() -This function returns a list of the font families available to the application. - -\section3 Qt.isQtObject(object) -Returns true if \c object is a valid reference to a Qt or QML object, otherwise false. - -\section1 Dynamic Object Creation -The following functions on the global object allow you to dynamically create QML -items from files or strings. See \l{Dynamic Object Management} for an overview -of their use. - - -\section2 Qt.createComponent(url file) - -This function takes the URL of a QML file as its only argument. It returns -a component object which can be used to create and load that QML file. - -Here is an example. Remember that QML files that might be loaded -over the network cannot be expected to be ready immediately. - -\snippet doc/src/snippets/declarative/componentCreation.js 0 -\codeline -\snippet doc/src/snippets/declarative/componentCreation.js 1 - -If you are certain the files will be local, you could simplify to: - -\snippet doc/src/snippets/declarative/componentCreation.js 2 - -The methods and properties of the Component element are defined in its own -page, but when using it dynamically only two methods are usually used. -\c Component.createObject() returns the created object or \c null if there is an error. -If there is an error, \l {Component::errorString()}{Component.errorString()} describes -the error that occurred. Note that createObject() takes exactly one argument, which is set -to the parent of the created object. Graphical objects without a parent will not appear -on the scene, but if you do not wish to parent the item at this point you can safely pass -in null. - -If you want to just create an arbitrary string of QML, instead of -loading a QML file, consider the \l{Qt.createQmlObject(string qml, object parent, string filepath)}{Qt.createQmlObject()} function. - - -\section2 Qt.createQmlObject(string qml, object parent, string filepath) - -Creates a new object from the specified string of QML. It requires a -second argument, which is the id of an existing QML object to use as -the new object's parent. If a third argument is provided, this is used -for error reporting as the filepath that the QML came from. - -Example (where \c targetItem is the id of an existing QML item): - -\snippet doc/src/snippets/declarative/createQmlObject.qml 0 - -This function is intended for use inside QML only. It is intended to behave -similarly to eval, but for creating QML elements. - -Returns the created object, \c or null if there is an error. In the case of an -error, a QtScript Error object is thrown. This object has the additional property, -qmlErrors, which is an array of all the errors encountered when trying to execute the -QML. Each object in the array has the members \c lineNumber, \c columnNumber, \c fileName and \c message. - -Note that this function returns immediately, and therefore may not work if -the QML loads new components. If you are trying to load a new component, -for example from a QML file, consider the \l{Qt.createComponent(url file)}{Qt.createComponent()} function -instead. 'New components' refers to external QML files that have not yet -been loaded, and so it is safe to use \c Qt.createQmlObject() to load built-in -components. - \section1 XMLHttpRequest \target XMLHttpRequest diff --git a/doc/src/declarative/qtdeclarative.qdoc b/doc/src/declarative/qtdeclarative.qdoc index 670a218..c47ab23 100644 --- a/doc/src/declarative/qtdeclarative.qdoc +++ b/doc/src/declarative/qtdeclarative.qdoc @@ -62,7 +62,7 @@ \endcode For more information on the Qt Declarative module, see the - \l{declarativeui.html}{Declarative UI} documentation. + \l{declarativeui.html}{Qt Quick} documentation. */ |