diff options
Diffstat (limited to 'doc')
| -rw-r--r-- | doc/src/examples/ahigl.qdoc | 572 | ||||
| -rw-r--r-- | doc/src/getting-started/examples.qdoc | 1 | ||||
| -rw-r--r-- | doc/src/snippets/code/doc_src_examples_ahigl.qdoc | 49 |
3 files changed, 0 insertions, 622 deletions
diff --git a/doc/src/examples/ahigl.qdoc b/doc/src/examples/ahigl.qdoc deleted file mode 100644 index c5e2387..0000000 --- a/doc/src/examples/ahigl.qdoc +++ /dev/null @@ -1,572 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the documentation of the Qt Toolkit. -** -** $QT_BEGIN_LICENSE:LGPL$ -** No Commercial Usage -** This file contains pre-release code and may not be distributed. -** You may use this file in accordance with the terms and conditions -** contained in the Technology Preview License Agreement accompanying -** this package. -** -** GNU Lesser General Public License Usage -** Alternatively, this file may be used under the terms of the GNU Lesser -** General Public License version 2.1 as published by the Free Software -** Foundation and appearing in the file LICENSE.LGPL included in the -** packaging of this file. Please review the following information to -** ensure the GNU Lesser General Public License version 2.1 requirements -** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** If you have questions regarding the use of this file, please contact -** Nokia at qt-info@nokia.com. -** -** -** -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -/*! - \example qws/ahigl - \title OpenGL for Embedded Systems Example - - \section1 Introduction - - This example demonstrates how you can use OpenGL for Embedded - Systems (ES) in your own screen driver and \l{add your graphics - driver to Qt for Embedded Linux}. In \l{Qt for Embedded Linux}, - painting is done in software, normally performed in two steps: - First, each client renders its windows onto its window surface in - memory using a paint engine. Then the server uses the screen - driver to compose the window surface images and copy the - composition to the screen. (See the \l{Qt for Embedded Linux - Architecture} documentation for details.) - - This example is not for the novice. It assumes the reader is - familiar with both OpenGL and the screen driver framework - demonstrated in the \l {Accelerated Graphics Driver Example}. - - An OpenGL screen driver for Qt for Embedded Linux can use OpenGL ES - in three ways. First, the \l{QWSServer}{Qt for Embedded Linux server} - can use the driver to compose multiple window images and then show the - composition on the screen. Second, clients can use the driver to - accelerate OpenGL painting operations using the QOpenGLPaintEngine - class. Finally, clients can use the driver to do OpenGL operations - with instances of the QGLWidget class. This example implements all - three cases. - - The example uses an implementation of OpenGL ES from - \l {http://ati.amd.com}{ATI} for the - \l {http://ati.amd.com/products/imageon238x/}{Imageon 2380}. The - OpenGL include files gl.h and egl.h must be installed to compile - the example, and the OpenGL and EGL libraries must be installed - for linking. If your target device is different, you must install - the include files and libraries for that device, and you also - might need to modify the example source code, if any API signatures - in your EGL library differ from the ones used here. - - After compiling and linking the example source, install the - screen driver plugin with the command \c {make install}. To - start an application that uses the plugin, you can either set the - environment variable \l QWS_DISPLAY and then start the - application, or just start the application with the \c -display - switch, as follows: - - \snippet doc/src/snippets/code/doc_src_examples_ahigl.qdoc 0 - - The example driver also implements an animated transition effect - for use when showing new windows or reshowing windows that have - been minimized. To enable this transition effect, run the - application with \c {-display ahigl:effects}. - - \section1 The Class Definitions - - The example comprises three main classes plus some helper classes. - The three main classes are the plugin (QAhiGLScreenPlugin), which - is defined in qscreenahiglplugin.cpp, the screen driver - (QAhiGLScreen), which is defined in qscreenahigl_qws.h, and the - window surface (QAhiGLWindowSurface), which is defined in - qwindowsurface_ahigl_p.h. The "Ahi" prefix in these class names - stands for \e {ATI Handheld Interface}. The example was written - for the ATI Imageon 2380, but it can also be used as a template - for other ATI handheld devices. - - \section2 The Plugin Class Definition - - The screen driver plugin is class QAhiGLScreenPlugin. - - \snippet examples/qws/ahigl/qscreenahiglplugin.cpp 0 - - QAhiGLScreenPlugin is derived from class QScreenDriverPlugin, - which in turn is derived from QObject. - - \section2 The Screen Driver Class Definitions - - The screen driver classes are the public class QAhiGLScreen and - its private implementation class QAhiGLScreenPrivate. QAhiGLScreen - is derived from QGLScreen, which is derived from QScreen. If your - screen driver will only do window compositions and display them, - then you can derive your screen driver class directly from - QScreen. But if your screen driver will do accelerated graphics - rendering operations with the QOpenGLPaintEngine, or if it will - handle instances of class QGLWidget, then you must derive your - screen driver class from QGLScreen. - - \snippet examples/qws/ahigl/qscreenahigl_qws.h 0 - - All functions in the public API of class QAhiGLScreen are virtual - functions declared in its base classes. hasOpenGL() is declared in - QGLScreen. It simply returns true indicating our example screen - driver does support OpenGL operations. The other functions in the - public API are declared in QScreen. They are called by the - \l{QWSServer}{Qt for Embedded Linux server} at the appropriate times. - - Note that class QScreen is a documented class but class QGLScreen - is not. This is because the design of class QGLScreen is not yet - final. - - The only data member in class QAhiGLScreen is a standard d_ptr, - which points to an instance of the driver's private implementation - class QAhiGLScreenPrivate. The driver's internal state is stored - in the private class. Using the so-called d-pointer pattern allows - you to make changes to the driver's internal design without - breaking binary compatibility. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 0 - - Class QAhiGLScreenPrivate is derived from QObject so that it can - use the Qt signal/slot mechanism. QAhiGLScreen is not a QObject, - so it can't use the signal/slot mechanism. Signals meant for our - screen driver are received by slots in the private implementation - class, in this case, windowEvent() and redrawScreen(). - - \section2 The Window Surface Class Definitions - - The window surface classes are QAhiGLWindowSurface and its private - implementation class QAhiGLWindowSurfacePrivate. We create class - QAhiGLWindowSurface so the screen driver can use the OpenGL paint - engine and the OpenGL widget, classes QOpenGLPaintEngine and - QGLWidget. QAhiGLWindowSurface is derived from the more general - OpenGL window surface class, QWSGLWindowSurface, which is derived - from QWSWindowSurface. - - \snippet examples/qws/ahigl/qwindowsurface_ahigl_p.h 0 - - In addition to implementing the standard functionality required by - any new subclass of QWSWindowSurface, QAhiGLWindowSurface also - contains the textureId() function used by QAhiGLScreen. - - The same d-pointer pattern is used in this window surface class. - The private implementation class is QAhiGLWindowSurfacePrivate. It - allows making changes to the state variables of the window surface - without breaking binary compatibility. - - \snippet examples/qws/ahigl/qwindowsurface_ahigl.cpp 0 - - In this case, our private implementation class has no member - functions except for its constructor. It contains only public data - members which hold state information for the window surface. - - \section2 The Helper Classes - - The example screen driver maintains a static \l {QMap} {map} of - all the \l {QWSWindow} {windows} it is showing on the screen. - Each window is mapped to an instance of struct WindowInfo. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 2 - - As each new window is created, an instance of struct WindowInfo is - allocated and inserted into the window map. WindowInfo uses a - GLuint to identify the OpenGL texture it creates for the window. - Note that the example driver, in addition to drawing windows using - OpenGL, also supports drawing windows in the normal way without - OpenGL, but it uses an OpenGL texture for the rendering operations - in either case. Top-level windows that are drawn without OpenGL - are first rendered in the normal way into a shared memory segment, - which is then converted to a OpenGL texture and drawn to the - screen. - - To animate the window transition effect, WindowInfo uses an - instance of the helper class ShowAnimation. The animation is - created by the windowEvent() slot in QAhiGLScreenPrivate, whenever - a \l {QWSServer::WindowEvent} {Show} window event is emitted by - the \l {QWSServer} {window server}. The server emits this signal - when a window is shown the first time and again later, when the - window is reshown after having been minimized. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 1 - - Class ShowAnimation is derived from the QTimeLine class, which is - used for controlling animations. QTimeLine is a QObject, so - ShowAnimation can use the Qt signal/slot mechanism. We will see - how the timeline's \l {QTimeLine::valueChanged()} {valueChanged()} - and \l {QTimeLine::finished()} {finished()} signals are used to - control the animation and then destroy the instance of - ShowAnimation, when the animation ends. The ShowAnimation - constructor needs the pointer to the screen driver's private - implementation class so it can set up these signal/slot - connections. - - \section1 The Class Implementations - - \section2 The Plugin Class Implementation - - QAhiGLScreenPlugin is a straightforward derivation of - QScreenDriverPlugin. It reimplements \l{QScreenDriverPlugin::}{keys()} - and \l{QScreenDriverPlugin::}{create()}. They are - called as needed by the \l{QWSServer}{Qt for Embedded Linux server.} - Recall that the server detects that the ahigl screen driver has - been requested, either by including "ahigl" in the value for the - environment variable QWS_DISPLAY, or by running your application - with a command line like the following. - - \snippet doc/src/snippets/code/doc_src_examples_ahigl.qdoc 1 - - The server calls \l {QScreenDriverPlugin::} {keys()}, which - returns a \l {QStringList} containing the singleton "ahigl" - matching the requested screen driver and telling the server that - it can use our example screen driver. The server then calls \l - {QScreenDriverPlugin::} {create()}, which creates the instance of - QAhiGLScreen. - - \snippet examples/qws/ahigl/qscreenahiglplugin.cpp 1 - - In the code snippet above, the macro Q_EXPORT_PLUGIN2 is used to export - the plugin class, QAhiGLScreen, for the qahiglscreen plugin. - Further information regarding plugins and how to create them - can be found at \l{How to Create Qt Plugins}. - - \section2 The Screen Driver Class Implementations - - The plugin creates the singleton instance of QAhiGLScreen. The - constructor is passed a \c displayId, which is used in the base - class QGLScreen to identify the server that the screen driver is - connected to. The constructor also creates its instance of - QAhiGLScreenPrivate, which instantiates a QTimer. The timeout() - signal of this timer is connected to the redrawScreen() slot so - the timer can be used to limit the frequency of actual drawing - operations in the hardware. - - The public API of class QAhiGLScreen consists of implementations - of virtual functions declared in its base classes. The function - hasOpenGL() is declared in base class QGLScreen. The others are - declared in base class QScreen. - - The \l {QScreen::}{connect()} function is the first one called by - the server after the screen driver is constructed. It initializes - the QScreen data members to hardcoded values that describe the ATI - screen. A better implementation would query the hardware for the - corresponding values in its current state and use those. It asks - whether the screen driver was started with the \c effects option - and sets the \c doEffects flag accordingly. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 7 - - The \l {QScreen::}{initDevice()} function is called by the server - after \l {QScreen::}{connect()}. It uses EGL library functions to - initialize the ATI hardware. Note that some data structures used - in this example are specific to the EGL implementation used, e.g., - the DummyScreen structure. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 8 - - Note the signal/slot connection at the bottom of initDevice(). We - connect the server's QWSServer::windowEvent() signal to the - windowEvent() slot in the screen driver's private implementation - class. The windowEvent() slot handles three window events, - QWSServer::Create, QWSServer::Destroy, and QWSServer::Show. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 5 - - The function manages instances of the helper classes associated - with each window. When a QWSServer::Create event occurs, it means - a new top-level \l {QWSWindow} {window} has been created. In this - case, an instance of helper class WindowInfo is created and - inserted into the window map with the pointer to the new \l - {QWSWindow} {window} as its key. When a QWSServer::Destroy event - occurs, a window is being destroyed, and its mapping is removed - from the window map. These two events are straightforward. The - tricky bits happen when a QWSServer::Show event occurs. This case - occurs when a window is shown for the first time and when it is - reshown after having been minimized. If the window transition - effect has been enabled, a new instance of the helper class - ShowAnimation is created and stored in a QPointer in the window's - instance of WindowInfo. The constructor of ShowAnimation - automatically \l {QTimeLine::start()} {starts} the animation of - the transition effect. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 3 - - To ensure that a ShowAnimation is not deleted until its animation - ends, the \l {QTimeLine::finished()} {finished()} signal is - connected to the \l {QObject::deleteLater()} {deleteLater()} slot. - When the animation ends, the finished() signal is emitted and the - deleteLater() slot deletes the ShowAnimation. The key here is that - the pointer to the ShowAnimation is stored in a QPointer in the - WindowInfo class. This QPointer will also be notified when the - ShowAnimation is deleted, so the QPointer in WindowInfo can null - itself out, if and only if it is still pointing to the instance - of ShowAnimation being deleted. - - The \l {QTimeLine::valueForTime()} {valueForTime()} function in - QTimeLine is reimplemented in ShowAnimation to return time values - that represent a curved path for the window transition effect. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 4 - - valueForTime() is called internally, when the time interval it - computed during the previous call has elapsed. If it computes a - next time value that is different from the one computed - previously, the \l {QTimeLine::valueChanged()} {valueChanged()} - signal is emitted. The ShowAnimation constructor shown above - connects this signal to the redrawScreen() slot in the screen - driver's private implementation class. This is how the animation - actually happens. - - The screen driver's implementation of \l {QScreen::} - {exposeRegion()} is where the main work of the screen driver is - meant to be done, i.e., updating the screen. It is called by the - \l {QWSServer} {window system} to update a particular window's - region of the screen. But note that it doesn't actually update the - screen, i.e., it doesn't actually call redrawScreen() directly, - but starts the updateTimer, which causes redrawScreen() to be - called once for each updateTimer interval. This means that all - calls to exposeRegion() during an updateTimer interval are handled - by a single call to redrawScreen(). Thus updateTimer can be used - to limit the frequency of screen updates. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 13 - - The call to the private function invalidateTexture() destroys - the window's existing texture (image). This ensures that a new - texture will be created for the window, when redrawScreen() is - eventually called. - - But there is a caveat to using updateTimer to limit the frequency - of screen updates. When the driver's animated transition effect - for new windows is enabled and a new window is being shown for the - first time or reshown after having been minimized, an instance of - ShowAnimation is created to run the animation. The valueChanged() - signal of this ShowAnimation is also connected to the - redrawScreen() slot, and QTimeLine, the base class of our - ShowAnimation, uses its own, internal timer to limit the speed of - the animation. This means that in the driver as currently written, - if the window transition effect is enabled (i.e. if the plugin is - started, with \c {-display ahigl:effects}), then redrawScreen() - can be called both when the update timer times out and when the - ShowAnimation timer times out, so the screen might get updated - more often than the frequency established by the update timer. - This may or may not be a bug, depending on your own hardware, if - you use this example as a template for your own OpenGL driver. - - The screen driver's private function redrawScreen() constructs - the window compositions. It is called only by the function of the - same name in the screen driver's private implementation class. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 6 - - Recall that this redrawScreen() in the private implementation - class is a slot function connected to two signals, the \c - timeout() signal of the updateTimer in the private implementation - class, and the valueChanged() signal of the helper class - ShowAnimation. Thus, the screen is only ever updated when a - timeout of one of the two timers occurs. This is important for two - reasons. First, the screen is meant to be updated no more than - once per updateTimer interval. Second, however, if the animated - window transition effect is requested, the screen might be updated - more often than that, and this might be a bug if the hardware - can't handle more frequent updates. - - The redrawScreen() in QAhiGLScreen begins by using standard - OpenGL to fill the screen with the background color. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 10 - - Next it iterates over the list of all \l {QWSWindow} {client - windows} obtained from the \l {QWSServer} {server}, extracting - from each window its instance of QWSWIndowSurface, then using that - window surface to create an OpenGL texture, and finally calling - the helper function drawWindow() to draw the texture on the - screen. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 11 - - Note the call to glBindTexture() immediately before the call to - drawWindow(). This call binds the identifer \c GL_TEXTURE_2D to - the texture we have just created. This makes our texture - accessible to functions in the OpenGL libraries. If you miss that - point, digging into the internals of drawWindow() won't make much - sense. - - Finally, the cursor is added to the window composition, and in the - last statement, the whole thing is displayed on the screen. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 12 - - The call to \c drawWindow(win,progress), in addition to passing a - pointer to the window to be redrawn, also passes the \c progress - parameter obtained by calling \l {QTimeLine::currentValue()} on - the window's instance of ShowAnimation. Recall that the current - value of the timeline is updated internally by a timer local to - the timeline, and the redrawScreen() slot is called whenever the - current value changes. The progress value will only be used if - the animated transition effect has been enabled. These extra calls - of redrawScreen() may cause the screen to be updated more often - than the rate determined by updateTimer. This must be taken - into account, if you set your updateTimer to timeout at the - maximum screen update frequency your hardware can handle. - - The drawWindow() function is not shown here and not explained - further, but the call to drawWindow() is the entry point to a - hierarchy of private helper functions that execute sequences of - OpenGL and EGL library calls. The reader is assumed to be familiar - enough with the OpenGL and EGL APIs to understand the code in - these helper functions on his own. Besides drawWindow(), the list - of these helper functions includes drawQuad(), drawQuadWavyFlag(), - the two overloadings of drawQuad_helper() (used by drawQuad() and - drawQuadWacyFlag()), and setRectCoords(). - - Note the two different ways the window's texture can be created in - redrawScreen(). If the window surface is an OpenGL window surface - (QAhiGLWindowSurface described below), the texture is obtained - from the window surface directly by calling its textureId() - function. But when the window surface is not an OpenGL one, the - static function createTexture() is called with the window - surface's \l {QImage} {image} to copy that image into an OpenGL - texture. This is done with the EGL functions glTexImage2D() and - glTexSubImage2D(). createTexture() is another function that - should be understandable for exsperienced OpenGL users, so it is - not shown or explained further here. - - The two implementations of \l {QScreen::}{createSurface()} are for - instantiating new window surfaces. The overloading with the widget - parameter is called in the client. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 14 - - If the parameter is an \l {QGLWidget} {OpenGL widget}, or, when it - isn't an OpenGL widget but its size is no bigger than 256 x 256, - we instantiate our subclass QAhiGLWindowSurface. Otherwise, we - instantiate a QWSWindowSurface. The size contraint is a - limitation of the OpenGL ES libraries we are using for our ATI - device. - - Note the test at the top of the function asking if our application - process is the \l {QApplication::GuiServer} {server}. We only - create instances of QAhiGLWindowSurface if our client is in the - server process. This is because of an implementation restriction - required by the OpenGL library used in the example. They only - support use of OpenGL in the server process. Hence a client can - use the QAhiGLWindowSurface if the client is in the server - process. - - The other overloading of createSurface() is called by the - server to create a window surface that will hold a copy of a - client side window surface. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 15 - - This overloading accepts a QString parameter identifying the type - of window surface to instantiate. QAhiGLWindowSurface is - instantiated if the parameter is \c ahigl. Otherwise, a normal - QWSWindowSurface is instantiated. The client's window surface - communicates its image data to the server's window surface through - shared memory. - - The implementation of \l {QScreen::}{setMode()}, is a stub in this - example. It would normally reset the frame buffer's resolution. - Its parameters are the \e width, \e height, and the bit \e depth - for the frame buffer's new resolution. If you implement setMode() - in your screen driver, remember that it must emit a signal to warn - other applications to redraw their frame buffers with the new - resolution. There is no significance to setMode() not being - implemented in this example. It simply wasn't implemented. - However, the stub had to be included because QScreen declares - setMode() to be pure virtual. - - Before the application exits, the server will call \l {QScreen::} - {shutdownDevice()} to release the hardware resources. This is also - done using EGL library functions. - - \snippet examples/qws/ahigl/qscreenahigl_qws.cpp 9 - - The server will also call \l {QScreen::}{disconnect()}, but this - function is only a stub in this example. - - \section2 The window Surface Class Implementations - - QAhiGLScreen creates instances of QAhiGLWindowSurface in its two - createSurface() functions, and there are two constructors for - QAhiGLWindowSurface that correspond to these two versions of - createSurface(). The constructor accepting a \l {QWidget} {widget} - parameter is called by the client side version of createSurface(), - and the constructor without the \l {QWidget} {widget} parameter is - called by the server side version. There will be a window surface - constructed on the server side for each one constructed on the - client side. - - \snippet examples/qws/ahigl/qwindowsurface_ahigl.cpp 1 - \codeline - \snippet examples/qws/ahigl/qwindowsurface_ahigl.cpp 2 - - The constructors create an instance of QAhiGLWindowSurfacePrivate, - the private implementation class, which contains all the state - variables for QAhiGLWindowSurface. The client side constructor - also creates an instance of QWSGLPaintDevice, the OpenGL paint - device, for return by \l {QWSWindowSurface::} {paintDevice()}. - This ensures that all \l {QPainter}s used on this surface will use - an OpenGL enabled QPaintEngine. It is a bit of jiggery pokery, - which is required because \l {QWSWindowSurface::} {paintDevice()} - is declared pure virtual. Normally, the client side constructor - will be called with an \l {QGLWidget}{OpenGL widget}, which has - its own \l {QWidget::} {paintEngine()} function that returns the - global static OpenGL paint engine, but because the constructor - also accepts a normal \l {QWidget}{widget}, it must be able to - find the OpenGL paint engine in that case as well, so since \l - {QWSWindowSurface::} {paintDevice()} must be implemented anyway, - the constructor creates an instance of QWSGLPaintDevice, which can - always return the global static pointer to QOpenGLPaintEngine. - - The OpenGL library implementation used for this example only - supports one OpenGL context. This context is therefore shared - among the single instance of QAhiGLScreen and all instances of - QAhiGLWindowSurface. It is passed to both constructors. - - This example uses the OpenGL frame buffer object extension, which - allows for accelerating OpenGL painting operations. Using this - OpenGL extension, painting operations are performed in a frame - buffer object, which QAhiGLScreen later uses to construct window - compositions on the screen. Allocation of the frame buffer object - is performed in \l {QWindowSurface::} {setGeometry()}. A safer way - to use this extension would be to first test to see if the - extension is supported by your OpenGL library, and use a different - approach if it is not. - - \snippet examples/qws/ahigl/qwindowsurface_ahigl.cpp 3 - - Since there can be several instances of the QAhiGLWindowSurface, we need - to make sure that the correct framebuffer object is active before painting. - This is done by reimplementing \l QWindowSurface::beginPaint(): - - \snippet examples/qws/ahigl/qwindowsurface_ahigl.cpp 4 - - Finally we need to make sure that whenever a widget grows beyond the size - supported by this driver (256 x 256), the surface is deleted and a new - standard surface is created instead. This is handled by reimplementing - \l QWSWindowSurface::isValid(): - - \snippet examples/qws/ahigl/qwindowsurface_ahigl.cpp 5 -*/ diff --git a/doc/src/getting-started/examples.qdoc b/doc/src/getting-started/examples.qdoc index 2ad730a7..d72f816 100644 --- a/doc/src/getting-started/examples.qdoc +++ b/doc/src/getting-started/examples.qdoc @@ -1121,7 +1121,6 @@ \o \l{qws/svgalib}{Accelerated Graphics Driver}\raisedaster \o \l{qws/dbscreen}{Double Buffered Graphics Driver}\raisedaster \o \l{qws/mousecalibration}{Mouse Calibration}\raisedaster - \o \l{qws/ahigl}{OpenGL for Embedded Systems}\raisedaster \o \l{qws/simpledecoration}{Simple Decoration}\raisedaster \endlist */ diff --git a/doc/src/snippets/code/doc_src_examples_ahigl.qdoc b/doc/src/snippets/code/doc_src_examples_ahigl.qdoc deleted file mode 100644 index ccdce8b..0000000 --- a/doc/src/snippets/code/doc_src_examples_ahigl.qdoc +++ /dev/null @@ -1,49 +0,0 @@ -/**************************************************************************** -** -** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). -** All rights reserved. -** Contact: Nokia Corporation (qt-info@nokia.com) -** -** This file is part of the documentation of the Qt Toolkit. -** -** $QT_BEGIN_LICENSE:LGPL$ -** No Commercial Usage -** This file contains pre-release code and may not be distributed. -** You may use this file in accordance with the terms and conditions -** contained in the Technology Preview License Agreement accompanying -** this package. -** -** GNU Lesser General Public License Usage -** Alternatively, this file may be used under the terms of the GNU Lesser -** General Public License version 2.1 as published by the Free Software -** Foundation and appearing in the file LICENSE.LGPL included in the -** packaging of this file. Please review the following information to -** ensure the GNU Lesser General Public License version 2.1 requirements -** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. -** -** In addition, as a special exception, Nokia gives you certain additional -** rights. These rights are described in the Nokia Qt LGPL Exception -** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. -** -** If you have questions regarding the use of this file, please contact -** Nokia at qt-info@nokia.com. -** -** -** -** -** -** -** -** -** $QT_END_LICENSE$ -** -****************************************************************************/ - -//! [0] -myApplication -qws -display ahigl -//! [0] - - -//! [1] -myApplication -qws -display ahigl -//! [1] |