diff options
Diffstat (limited to 'mkspecs/common/symbian/symbian.conf')
| -rw-r--r-- | mkspecs/common/symbian/symbian.conf | 98 |
1 files changed, 11 insertions, 87 deletions
diff --git a/mkspecs/common/symbian/symbian.conf b/mkspecs/common/symbian/symbian.conf index 1053ab3..c11ba55 100644 --- a/mkspecs/common/symbian/symbian.conf +++ b/mkspecs/common/symbian/symbian.conf @@ -1,9 +1,9 @@ # -# qmake configuration for symbian-* +# qmake configuration for all symbian mkspecs # TEMPLATE = app -CONFIG += qt warn_on release incremental +CONFIG += qt warn_on release incremental link_prl sis_targets QT += core gui QMAKE_INCREMENTAL_STYLE = sublib @@ -14,7 +14,6 @@ QMAKE_COMPILER_DEFINES += SYMBIAN QMAKE_EXT_OBJ = .o QMAKE_EXT_RES = _res.o -QMAKE_CC = gcc QMAKE_LEX = flex QMAKE_LEXFLAGS = QMAKE_YACC = byacc @@ -27,7 +26,6 @@ QMAKE_CFLAGS_RELEASE = QMAKE_CFLAGS_DEBUG = QMAKE_CFLAGS_YACC = -Wno-unused -Wno-parentheses -QMAKE_CXX = g++ QMAKE_CXXFLAGS = $$QMAKE_CFLAGS # Symbian build system applies -cwd source on the MWCC command line. # this causes problems with include paths, -cwd include uses the same @@ -52,12 +50,6 @@ QMAKE_CXXFLAGS_EXCEPTIONS_OFF = QMAKE_INCDIR = QMAKE_INCDIR_QT = $$[QT_INSTALL_HEADERS] -QMAKE_RUN_CC = $(CC) -c $(CFLAGS) $(INCPATH) -o $obj $src -QMAKE_RUN_CC_IMP = $(CC) -c $(CFLAGS) $(INCPATH) -o $@ $< -QMAKE_RUN_CXX = $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $obj $src -QMAKE_RUN_CXX_IMP = $(CXX) -c $(CXXFLAGS) $(INCPATH) -o $@ $< - -QMAKE_LINK = QMAKE_LFLAGS = QMAKE_LFLAGS.ARMCC = QMAKE_LFLAGS_EXCEPTIONS_ON = @@ -71,12 +63,13 @@ QMAKE_LINK_OBJECT_MAX = QMAKE_LINK_OBJECT_SCRIPT= QMAKE_LIBS = -llibc -llibm -leuser -llibdl -QMAKE_LIBS_CORE = $$QMAKE_LIBS -llibpthread -lefsrv -lhal +QMAKE_LIBS_CORE = $$QMAKE_LIBS -lefsrv -lhal QMAKE_LIBS_GUI = $$QMAKE_LIBS_CORE -lfbscli -lbitgdi -lgdi -lws32 -lapgrfx -lcone -leikcore -lmediaclientaudio -leikcoctl -leiksrv -lapparc -lcentralrepository QMAKE_LIBS_NETWORK = QMAKE_LIBS_EGL = -llibEGL QMAKE_LIBS_OPENGL = QMAKE_LIBS_OPENVG = -llibOpenVG -lgraphicsresource -lfbscli -lbitgdi -lgdi +QMAKE_LIBS_THREAD = -llibpthread QMAKE_LIBS_COMPAT = QMAKE_LIBS_QT_ENTRY = -llibcrt0.lib QMAKE_LIBS_S60 = -lavkon @@ -101,84 +94,15 @@ contains(QMAKE_HOST.os,Windows) { QMAKE_CHK_DIR_EXISTS = test -d } -contains(QMAKE_HOST.os, "Windows") { - QMAKE_MOC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}moc.exe - QMAKE_UIC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}uic.exe - QMAKE_IDC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}idc.exe -} else { - QMAKE_MOC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}moc - QMAKE_UIC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}uic - QMAKE_IDC = $$[QT_INSTALL_BINS]$${DIR_SEPARATOR}idc -} +QMAKE_IDL = midl +QMAKE_LIB = ar -ru +QMAKE_RC = windres +QMAKE_ZIP = zip -r -9 -QMAKE_IDL = midl -QMAKE_LIB = ar -ru -QMAKE_RC = windres -QMAKE_ZIP = zip -r -9 +QMAKE_TAR = tar -cf +QMAKE_GZIP = gzip -9f -QMAKE_STRIP = strip -QMAKE_STRIPFLAGS_LIB += --strip-unneeded +QT_ARCH = symbian load(qt_config) load(symbian/platform_paths) -load(symbian/add_mmp_rules) - -symbian-abld { -# Versions of abld prior to Symbian^3 have a bug where you cannot remove something from the command line without replacing it -# Rather than figure out which version of abld we're using, we'll replace the command with a macro *that should never be used* - MMP_RULES_DONT_EXPORT_ALL_CLASS_IMPEDIMENTA = "OPTION_REPLACE ARMCC --export_all_vtbl -D__QT_NOEFFECTMACRO_DONOTUSE" -} else { - MMP_RULES_DONT_EXPORT_ALL_CLASS_IMPEDIMENTA = "OPTION_REPLACE ARMCC --export_all_vtbl // don't use --export_all_vtbl" -} -MMP_RULES += PAGED BYTEPAIRCOMPRESSTARGET -MMP_RULES += $$MMP_RULES_DONT_EXPORT_ALL_CLASS_IMPEDIMENTA -SYMBIAN_PLATFORMS = WINSCW GCCE ARMV5 ARMV6 - -INCLUDEPATH = \ - $$[QT_INSTALL_PREFIX]/mkspecs/common/symbian/stl-off \ - $$[QT_INSTALL_PREFIX]/mkspecs/common/symbian \ - $${EPOCROOT}epoc32/include \ - $$OS_LAYER_LIBC_SYSTEMINCLUDE \ - $$INCLUDEPATH - -# Ensure '.' directory is the first in include path. -# RVCT seems to do this automatically, but WINSCW compiler does not, so add it here. -MMP_RULES += "USERINCLUDE ." - -# Supports S60 3.0, 3.1, 3.2 and 5.0 by default -default_deployment.pkg_prerules = \ - "; Default HW/platform dependencies" \ - "[0x101F7961],0,0,0,{\"S60ProductID\"}" \ - "[0x102032BE],0,0,0,{\"S60ProductID\"}" \ - "[0x102752AE],0,0,0,{\"S60ProductID\"}" \ - "[0x1028315F],0,0,0,{\"S60ProductID\"}" \ - " " - -DEPLOYMENT += default_deployment - -exists($${EPOCROOT}epoc32/release/winscw/udeb/z/system/install/series60v5.0.sis )|exists($${EPOCROOT}epoc32/data/z/system/install/series60v5.0.sis) { - S60_VERSION = 5.0 -} else { - exists($${EPOCROOT}epoc32/release/winscw/udeb/z/system/install/series60v3.2.sis )|exists($${EPOCROOT}epoc32/data/z/system/install/series60v3.2.sis) { - S60_VERSION = 3.2 - } else { - S60_VERSION = 3.1 - MMP_RULES -= PAGED BYTEPAIRCOMPRESSTARGET - } -} - -QMAKE_CXXFLAGS_FAST_VFP.ARMCC = --fpmode fast -# [TODO] QMAKE_CXXFLAGS_FAST_VFP.GCCE = - -symbian { - armfpu = $$find(MMP_RULES, "ARMFPU") - !isEmpty(armfpu) { - vfpv2 = $$find(MMP_RULES, "vfpv2") - !isEmpty(vfpv2) { - # we will respect fpu setting obtained from configure, but, - # if vfpv2 or softvfp+vfpv2 used we want to force RunFast VFP mode - QMAKE_CXXFLAGS.ARMCC += $${QMAKE_CXXFLAGS_FAST_VFP.ARMCC} - # [TODO] QMAKE_CXXFLAGS.GCCE += $${QMAKE_CXXFLAGS_FAST_VFP.GCCE} - } - } -} |