6 files changed, 159 insertions, 0 deletions
diff --git a/mkspecs/symbian/linux-armcc/features/default_post.prf b/mkspecs/symbian/linux-armcc/features/default_post.prf
new file mode 100644
index 0000000..7aa1f4d
--- /dev/null
+++ b/mkspecs/symbian/linux-armcc/features/default_post.prf
@@ -0,0 +1,5 @@
+load(default_post.prf)
+
+# It is important that this config be executed last,
+# and qmake does them in reverse order.
+CONFIG = symbian_building $$CONFIG
diff --git a/mkspecs/symbian/linux-armcc/qmake.conf b/mkspecs/symbian/linux-armcc/qmake.conf
new file mode 100644
index 0000000..6042fa4
--- /dev/null
+++ b/mkspecs/symbian/linux-armcc/qmake.conf
@@ -0,0 +1,54 @@
+#
+# qmake configuration for symbian/linux-armcc
+#
+
+include(../../common/symbian/symbian-makefile.conf)
+
+include(../../common/armcc.conf)
+
+QMAKE_LIBS           += usrt2_2.lib dfpaeabi.dso dfprvct2_2.dso drtaeabi.dso scppnwdl.dso drtrvct2_2.dso h_t__uf.l\\(switch8.o\\)
+
+QMAKE_RVCT_LINKSTYLE = 1
+
+# notice that the middle part of the following set of vars matches the TARGET content of the libs
+
+#QMAKE_qtmain_CXXFLAGS	= --arm
+#QMAKE_QtCore_CXXFLAGS	= 
+QMAKE_QtGui_LFLAGS	= "--rw-base 0x800000"
+#QMAKE_QtDBus_CXXFLAGS	= 
+#QMAKE_QtDeclarative_CXXFLAGS	= 
+#QMAKE_QtMultimedia_CXXFLAGS	= 
+#QMAKE_QtNetwork_CXXFLAGS	= 
+#QMAKE_QtOpenGL_CXXFLAGS	= 
+#QMAKE_QtOpenVG_CXXFLAGS	= 
+#QMAKE_phonon_CXXFLAGS	= 
+#QMAKE_QtScript_CXXFLAGS	= 
+#QMAKE_QtScriptTools_CXXFLAGS	= 
+#QMAKE_QtSql_CXXFLAGS	= 
+#QMAKE_QtSvg_CXXFLAGS	= 
+#QMAKE_QtTest_CXXFLAGS	= 
+#QMAKE_QtXmlPatterns_CXXFLAGS	= 
+#QMAKE_QtXml_CXXFLAGS	= 
+# Move RW-section base address to start from 0xE00000 instead of the toolchain default 0x400000.
+QMAKE_QtWebKit_LFLAGS	=  --rw-base 0xE00000
+
+QMAKE_CFLAGS		+= --dllimport_runtime --preinclude rvct2_2.h  --diag_suppress 186,654,1300 --thumb --fpu softvfp --cpu 5T --enum_is_int -Ono_known_library --fpmode ieee_no_fenv --export_all_vtbl --no_vfe --apcs /inter $$QMAKE_CFLAGS.ARMCC
+QMAKE_CXXFLAGS		+= $$QMAKE_CFLAGS --no_parse_templates $$QMAKE_CXXFLAGS.ARMCC
+QMAKE_LFLAGS      	+=  --symver_soname --diag_suppress 6331,6780 --bpabi --reloc --datacompressor=off --split --dll --no_scanlib
+QMAKE_LFLAGS_APP        += --entry _E32Startup
+QMAKE_LFLAGS_SHLIB      += --entry _E32Dll
+QMAKE_LFLAGS_PLUGIN     += $$QMAKE_LFLAGS_SHLIB
+
+DEFINES		+= EKA2 \
+                   __ARMCC__ \
+                   __ARMcc_2__ \
+                   __ARMCC_2_2__
+
+QMAKE_LIBDIR += $${EPOCROOT}epoc32/release/armv5/lib
+QMAKE_LIBDIR *= $$(RVCT22LIB)
+
+INCLUDEPATH = $${EPOCROOT}epoc32/include \
+    $${EPOCROOT}epoc32/include/rvct2_2 \
+    $${EPOCROOT}epoc32/include/variant \
+    $${EPOCROOT}epoc32/include/stdapis \
+    $$INCLUDEPATH
diff --git a/mkspecs/symbian/linux-armcc/qplatformdefs.h b/mkspecs/symbian/linux-armcc/qplatformdefs.h
new file mode 100644
index 0000000..db67648
--- /dev/null
+++ b/mkspecs/symbian/linux-armcc/qplatformdefs.h
@@ -0,0 +1 @@
+#include "../../common/symbian/qplatformdefs.h"
diff --git a/mkspecs/symbian/linux-gcce/features/default_post.prf b/mkspecs/symbian/linux-gcce/features/default_post.prf
new file mode 100644
index 0000000..7aa1f4d
--- /dev/null
+++ b/mkspecs/symbian/linux-gcce/features/default_post.prf
@@ -0,0 +1,5 @@
+load(default_post.prf)
+
+# It is important that this config be executed last,
+# and qmake does them in reverse order.
+CONFIG = symbian_building $$CONFIG
diff --git a/mkspecs/symbian/linux-gcce/qmake.conf b/mkspecs/symbian/linux-gcce/qmake.conf
new file mode 100644
index 0000000..de3791c
--- /dev/null
+++ b/mkspecs/symbian/linux-gcce/qmake.conf
@@ -0,0 +1,92 @@
+#
+# qmake configuration for symbian/linux-gcce
+#
+
+include(../../common/symbian/symbian-makefile.conf)
+
+include(../../common/g++.conf)
+
+QMAKE_CC		= arm-none-symbianelf-gcc
+QMAKE_CXX		= arm-none-symbianelf-g++
+QMAKE_LINK		= arm-none-symbianelf-ld
+QMAKE_LINK_SHLIB	= arm-none-symbianelf-ld
+QMAKE_LINK_C		= arm-none-symbianelf-ld
+QMAKE_LINK_C_SHLIB	= arm-none-symbianelf-ld
+QMAKE_AR		= arm-none-symbianelf-ar cqs
+
+# gcce defaults to 'arm' instruction set.  Lets use the better 'thumb' if possible
+# notice that the middle part of the following set of vars matches the TARGET content of the libs
+
+QMAKE_qtmain_CXXFLAGS	= -mthumb
+QMAKE_QtCore_CXXFLAGS	= -mthumb
+QMAKE_QtGui_LFLAGS	= -Ttext 0x8000 -Tdata 0xE00000
+QMAKE_QtDBus_CXXFLAGS	= -mthumb
+QMAKE_QtDeclarative_CXXFLAGS	= -mthumb
+QMAKE_QtMultimedia_CXXFLAGS	= -mthumb
+QMAKE_QtNetwork_CXXFLAGS	= -mthumb
+QMAKE_QtOpenGL_CXXFLAGS	= -mthumb
+QMAKE_QtOpenVG_CXXFLAGS	= -mthumb
+QMAKE_phonon_CXXFLAGS	= -mthumb
+QMAKE_QtScript_CXXFLAGS	= -mthumb
+QMAKE_QtScriptTools_CXXFLAGS	= -mthumb
+QMAKE_QtSql_CXXFLAGS	= -mthumb
+QMAKE_QtSvg_CXXFLAGS	= -mthumb
+QMAKE_QtTest_CXXFLAGS	= -mthumb
+QMAKE_QtXmlPatterns_CXXFLAGS	= -mthumb
+QMAKE_QtXml_CXXFLAGS	= -mthumb
+#TODO fails with; arm-none-symbianelf-ld: section .data loaded at [00e00000,00e05973] overlaps section .text loaded at [00008000,00fe748b]
+QMAKE_QtWebKit_LFLAGS	= -Ttext 0x8000 -Tdata 0xE00000
+
+# never use -fPIC, gcce-linker doesn't like it.
+# g++ conf above adds it if the host platform is 64 bit, so we remove it again
+QMAKE_CFLAGS_SHLIB	-= -fPIC
+QMAKE_CFLAGS_STATIC_LIB	-= -fPIC
+QMAKE_CXXFLAGS_SHLIB	-= -fPIC
+QMAKE_CXXFLAGS_STATIC_LIB	-= -fPIC
+
+QMAKE_LFLAGS_SONAME	=
+#QMAKE_LFLAGS_THREAD	+=
+#QMAKE_LFLAGS_NOUNDEF	+= -Wl,--no-undefined
+QMAKE_RPATH		= --rpath=
+
+DEFINES		+= __GCCE__ \
+                   UNICODE \
+                   _STLP_NO_EXCEPTION_HEADER
+
+QMAKE_LFLAGS_APP        += --entry _E32Startup
+QMAKE_LFLAGS_SHLIB      += --default-symver --entry _E32Dll
+QMAKE_LFLAGS_PLUGIN     += $$QMAKE_LFLAGS_SHLIB
+
+gcceExtraFlags = --include=${EPOCROOT}epoc32/include/gcce/gcce.h -march=armv5t -mapcs -mthumb-interwork -nostdinc -c -fvisibility-inlines-hidden -msoft-float -T script
+QMAKE_CFLAGS += $${gcceExtraFlags}
+QMAKE_CXXFLAGS += $${gcceExtraFlags} -x c++ -fexceptions -fno-unit-at-a-time
+
+QMAKE_LFLAGS += --target1-abs \
+                --no-undefined \
+                --strip-debug \
+                --nostdlib
+
+QMAKE_LIBDIR	+= ${EPOCROOT}/epoc32/release/armv5/udeb/
+
+# g++ knows the path to the gcc-shipped-libs, ld doesn't. So cache the full path in the generate Makefile
+QMAKE_GCC_SEARCH_DIRS =$$system($$QMAKE_CXX -print-search-dirs)
+for(line, QMAKE_GCC_SEARCH_DIRS) {
+    contains(line, "libraries:") {
+        foundIt="1"
+    } else {
+        contains(foundIt, "1") {
+            QMAKE_LFLAGS += $$replace(line, "[=:]", " -L")
+        }
+    }
+}
+
+QMAKE_LIBDIR += $${EPOCROOT}epoc32/release/armv5/lib
+
+INCLUDEPATH = ${EPOCROOT}epoc32/include/ \
+    $${EPOCROOT}epoc32/include/variant \
+    $${EPOCROOT}epoc32/include/stdapis \
+    $${EPOCROOT}epoc32/include/gcce \
+    ${EPOCROOT}epoc32/include/stdapis/sys \
+    ${EPOCROOT}epoc32/include/stdapis/stlport \
+    $$INCLUDEPATH
+
diff --git a/mkspecs/symbian/linux-gcce/qplatformdefs.h b/mkspecs/symbian/linux-gcce/qplatformdefs.h
new file mode 100644
index 0000000..4a658c5
--- /dev/null
+++ b/mkspecs/symbian/linux-gcce/qplatformdefs.h
@@ -0,0 +1,2 @@
+#include "../../common/symbian/qplatformdefs.h"
+