diff options
Diffstat (limited to 'src/3rdparty')
66 files changed, 12902 insertions, 0 deletions
diff --git a/src/3rdparty/libconninet.pri b/src/3rdparty/libconninet.pri new file mode 100644 index 0000000..e041e2b --- /dev/null +++ b/src/3rdparty/libconninet.pri @@ -0,0 +1,18 @@ +INCLUDEPATH += $$PWD/libconninet/src + +QMAKE_CXXFLAGS += $$QT_CFLAGS_GLIB + +HEADERS += \ + $$PWD/libconninet/src/dbusdispatcher.h \ + $$PWD/libconninet/src/iapconf.h \ + $$PWD/libconninet/src/iapmonitor.h \ + $$PWD/libconninet/src/maemo_icd.h \ + $$PWD/libconninet/src/proxyconf.h + +SOURCES += \ + $$PWD/libconninet/src/dbusdispatcher.cpp \ + $$PWD/libconninet/src/iapconf.cpp \ + $$PWD/libconninet/src/iapmonitor.cpp \ + $$PWD/libconninet/src/maemo_icd.cpp \ + $$PWD/libconninet/src/proxyconf.cpp + diff --git a/src/3rdparty/libconninet/AUTHORS b/src/3rdparty/libconninet/AUTHORS new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/3rdparty/libconninet/AUTHORS diff --git a/src/3rdparty/libconninet/COPYING b/src/3rdparty/libconninet/COPYING new file mode 100644 index 0000000..b124cf5 --- /dev/null +++ b/src/3rdparty/libconninet/COPYING @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + <one line to give the library's name and a brief idea of what it does.> + Copyright (C) <year> <name of author> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + <signature of Ty Coon>, 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff --git a/src/3rdparty/libconninet/ChangeLog b/src/3rdparty/libconninet/ChangeLog new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/3rdparty/libconninet/ChangeLog diff --git a/src/3rdparty/libconninet/INSTALL b/src/3rdparty/libconninet/INSTALL new file mode 100644 index 0000000..54caf7c --- /dev/null +++ b/src/3rdparty/libconninet/INSTALL @@ -0,0 +1,229 @@ +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the `--target=TYPE' option to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/src/3rdparty/libconninet/Makefile.am b/src/3rdparty/libconninet/Makefile.am new file mode 100644 index 0000000..250637a --- /dev/null +++ b/src/3rdparty/libconninet/Makefile.am @@ -0,0 +1,49 @@ +SUBDIRS = src tests + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = conninet.pc + +MAINTAINERCLEANFILES = \ + Makefile.in config.h.in configure \ + install-sh ltmain.sh missing mkinstalldirs \ + config.log config.status config.guess config.sub \ + build-stamp compile depcomp acinclude.m4 aclocal.m4 \ + debian/files \ + debian/libconninet0.postinst.debhelper \ + debian/libconninet0.postrm.debhelper \ + debian/libconninet0.substvars + +EXTRA_DIST = \ + debian/changelog \ + debian/compat \ + debian/control \ + debian/copyright \ + debian/libconninet0-dev.dirs \ + debian/libconninet0-dev.files \ + debian/libconninet0.dirs \ + debian/libconninet0.files \ + debian/rules + +# get rid of debian build dirs +maintainer-clean-local: + -rm -rf debian/build debian/tmp \ + debian/libconninet0 \ + debian/libconninet0-dev \ + debian/libconninet0-dbg + +if DOXYGEN_DOCS_ENABLED + DOXYGEN_LINE = $(DOXYGEN) doxygen.cfg +else + DOXYGEN_LINE = +endif + +.PHONY : doc + +doc: + $(DOXYGEN_LINE) + +deb: dist + -mkdir $(top_builddir)/debian-build + cd $(top_builddir)/debian-build && tar zxf ../$(top_builddir)/$(PACKAGE)-$(VERSION).tar.gz + cd $(top_builddir)/debian-build/$(PACKAGE)-$(VERSION) && dpkg-buildpackage -rfakeroot -sa -D + -rm -rf $(top_builddir)/debian-build/$(PACKAGE)-$(VERSION) diff --git a/src/3rdparty/libconninet/NEWS b/src/3rdparty/libconninet/NEWS new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/3rdparty/libconninet/NEWS diff --git a/src/3rdparty/libconninet/README b/src/3rdparty/libconninet/README new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/3rdparty/libconninet/README diff --git a/src/3rdparty/libconninet/autogen.sh b/src/3rdparty/libconninet/autogen.sh new file mode 100755 index 0000000..a8fd885 --- /dev/null +++ b/src/3rdparty/libconninet/autogen.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +autoreconf --verbose --install --force diff --git a/src/3rdparty/libconninet/config.guess b/src/3rdparty/libconninet/config.guess new file mode 100755 index 0000000..e3a2116 --- /dev/null +++ b/src/3rdparty/libconninet/config.guess @@ -0,0 +1,1533 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-06-10' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner <per@bothner.com>. +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include <stdio.h> /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <sys/systemcfg.h> + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include <stdlib.h> + #include <unistd.h> + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <unistd.h> + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd | genuineintel) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` + echo ${UNAME_MACHINE}-pc-isc$UNAME_REL + elif /bin/uname -X 2>/dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes <hewes@openmarket.com>. + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c <<EOF +#ifdef _SEQUENT_ +# include <sys/types.h> +# include <sys/utsname.h> +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include <sys/param.h> + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include <sys/param.h> +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 <<EOF +$0: unable to guess system type + +This script, last modified $timestamp, has failed to recognize +the operating system you are using. It is advised that you +download the most up to date version of the config scripts from + + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.guess;hb=HEAD +and + http://git.savannah.gnu.org/gitweb/?p=config.git;a=blob_plain;f=config.sub;hb=HEAD + +If the version you run ($0) is already up to date, please +send the following data and any information you think might be +pertinent to <config-patches@gnu.org> in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/3rdparty/libconninet/config.sub b/src/3rdparty/libconninet/config.sub new file mode 100755 index 0000000..eb0389a --- /dev/null +++ b/src/3rdparty/libconninet/config.sub @@ -0,0 +1,1693 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-06-11' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to <config-patches@gnu.org>." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/3rdparty/libconninet/configure.ac b/src/3rdparty/libconninet/configure.ac new file mode 100644 index 0000000..2a383ee --- /dev/null +++ b/src/3rdparty/libconninet/configure.ac @@ -0,0 +1,90 @@ +AC_INIT([libconninet], patsubst(esyscmd([dpkg-parsechangelog | sed -n '/^Version: \(.*\)$/ {s//\1/;p}']), [ +]), [jukka.rissanen@nokia.com]) +AM_INIT_AUTOMAKE([foreign]) + +AC_PROG_CXX +AC_PROG_LIBTOOL + +AC_ARG_ENABLE(docs, [ --enable-docs Build DOXYGEN documentation (requires Doxygen)],enable_docs=$enableval,enable_docs=auto) + +AC_PATH_PROG(DOXYGEN, doxygen, no) +AC_MSG_CHECKING([whether to build Doxygen documentation]) + +if test x$DOXYGEN = xno ; then + have_doxygen=no +else + have_doxygen=yes +fi +if test x$enable_docs = xauto ; then + if test x$have_doxygen = xno ; then + enable_docs=no + else + enable_docs=yes + fi +fi +if test x$enable_docs = xyes; then + if test x$have_doxygen = xno; then + AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found]) + else + AC_MSG_RESULT(yes) + fi +else + AC_MSG_RESULT(no) +fi + +AM_CONDITIONAL(DOXYGEN_DOCS_ENABLED, test x$enable_docs = xyes) +AC_SUBST(DOXYGEN) + +PKG_CHECK_MODULES(GLIB, glib-2.0) +AC_SUBST(GLIB_CFLAGS) +AC_SUBST(GLIB_LIBS) + +PKG_CHECK_MODULES(QTCORE, QtCore) +AC_SUBST(QTCORE_CFLAGS) +AC_SUBST(QTCORE_LIBS) + +PKG_CHECK_MODULES(QTNETWORK, QtNetwork) +AC_SUBST(QTNETWORK_CFLAGS) +AC_SUBST(QTNETWORK_LIBS) + +PKG_CHECK_MODULES(QTDBUS, QtDBus) +AC_SUBST(QTDBUS_CFLAGS) +AC_SUBST(QTDBUS_LIBS) + +PKG_CHECK_MODULES(QTTEST, QtTest) +AC_SUBST(QTTEST_CFLAGS) +AC_SUBST(QTTEST_LIBS) + +PKG_CHECK_MODULES(DBUS, dbus-glib-1) +AC_SUBST(DBUS_CFLAGS) +AC_SUBST(DBUS_LIBS) + +PKG_CHECK_MODULES(CONNSETTINGS, connsettings) +AC_SUBST(CONNSETTINGS_CFLAGS) +AC_SUBST(CONNSETTINGS_LIBS) + +PKG_CHECK_MODULES(OSSO_IC, osso-ic) +AC_SUBST(OSSO_IC_CFLAGS) +AC_SUBST(OSSO_IC_LIBS) + +PKG_CHECK_MODULES(ICD_DEV, icd2) +AC_SUBST(ICD_DEV_CFLAGS) +AC_SUBST(ICD_DEV_LIBS) + +PKG_CHECK_MODULES(GCONF, gconf-2.0) +AC_SUBST(GCONF_CFLAGS) +AC_SUBST(GCONF_LIBS) + +PKG_CHECK_MODULES(QGCONF, gq-gconf) +AC_SUBST(QGCONF_CFLAGS) +AC_SUBST(QGCONF_LIBS) + +CONCFLAGS="-Wall -Werror -Wmissing-prototypes" +AC_SUBST(CONCFLAGS) + +AC_CONFIG_FILES([Makefile \ + src/Makefile \ + tests/Makefile \ + conninet.pc \ + doxygen.cfg]) +AC_OUTPUT diff --git a/src/3rdparty/libconninet/conninet.pc.in b/src/3rdparty/libconninet/conninet.pc.in new file mode 100644 index 0000000..68cdee0 --- /dev/null +++ b/src/3rdparty/libconninet/conninet.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: libconninet +Description: Internet Connectivity support library +Version: @VERSION@ +Requires: dbus-1 >= 0.60 glib-2.0 QtCore QtDBus QtGui +Libs: -lconninet +Cflags: -I${includedir}/conninet diff --git a/src/3rdparty/libconninet/debian/changelog b/src/3rdparty/libconninet/debian/changelog new file mode 100644 index 0000000..436d318 --- /dev/null +++ b/src/3rdparty/libconninet/debian/changelog @@ -0,0 +1,285 @@ +libconninet (0.41+0m6) unstable; urgency=low + + * This entry has been added by BIFH queue processor + version has been changed to 0.41+0m6 + + -- Qing Jin <ext-qing.1.jin@nokia.com> Thu, 15 Jul 2010 15:56:38 +0300 + +libconninet (0.41) unstable; urgency=low + + * Fixes: NB#175098 - Qt4.7 Webkit crashes when bearer API QNetworkSession + constructor calls QNetworkSession::syncStateWithInterface() which in turn + calls Maemo::state() and Maemo::addrinfo() and webkit expects that event + loop is not run but those function process main loop events. + Now Maemo::state() and Maemo::addrinfo() are changed to be synchronous + and fully blocking functions. The old non-blocking versions are called + Maemo::state_non_blocking() and Maemo::addrinfo_non_blocking(). + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 14 Jul 2010 10:12:47 +0300 + +libconninet (0.40) unstable; urgency=low + + * Fixes: NB#167465 - Unable to open network connection using libbearer + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 11 May 2010 10:47:10 +0300 + +libconninet (0.39) unstable; urgency=low + + * Fixes: NB#167982 - initialize DBus vtable in DBusDispatcher. + + -- Aapo Makela <aapo.makela@nokia.com> Mon, 10 May 2010 14:42:39 +0300 + +libconninet (0.38) unstable; urgency=low + + * Changing icd2 connect_req to be synchronous as the check for + returned connect signal did not work correctly, this caused a + long timeout when connect() was called. + * Scan sometimes missed results and did not return them to caller. + * HTTP proxy settings were not set correctly. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 15 Apr 2010 11:25:06 +0300 + +libconninet (0.37) unstable; urgency=low + + * Make proxy config reference counting atomic. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 3 Mar 2010 13:23:08 +0200 + +libconninet (0.36) unstable; urgency=low + + * Fixes: NB#157586 - Cleanup dbus listener when WLAN scanning object is + deleted. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Fri, 26 Feb 2010 13:30:41 +0200 + +libconninet (0.35) unstable; urgency=low + + * Fixes: NB#156883 - libconninet fails to build under the Platform SDK (SB2) + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 18 Feb 2010 12:14:40 +0200 + +libconninet (0.34) unstable; urgency=low + + * Coverity fix + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 16 Feb 2010 16:38:00 +0200 + +libconninet (0.33) unstable; urgency=low + + * Added API to update Qt proxy config. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 26 Jan 2010 15:48:36 +0200 + +libconninet (0.32) unstable; urgency=low + + * Fixed IAPConf to unset value when set value is invalid. + * Updated IAPMonitor to use libconnsettings. + + -- Aapo Makela <aapo.makela@nokia.com> Wed, 03 Feb 2010 07:32:45 +0200 + +libconninet (0.31) unstable; urgency=low + + * Fixes: NB#154892 - Check nulls in IAPConf. + + -- Aapo Makela <aapo.makela@nokia.com> Mon, 01 Feb 2010 09:32:06 +0200 + +libconninet (0.30) unstable; urgency=low + + * Updated IAPConf to use libconnsettings. + + -- Aapo Makela <aapo.makela@nokia.com> Fri, 29 Jan 2010 12:58:03 +0200 + +libconninet (0.29) unstable; urgency=low + + * Fixed dependencies + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Fri, 15 Jan 2010 10:16:07 +0200 + +libconninet (0.28) unstable; urgency=low + + * Get rid of libdui dependency + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 13 Jan 2010 09:56:26 +0200 + +libconninet (0.27) unstable; urgency=low + + * Insert new pending calls to the list in DBusDispatcher. + + -- Aapo Makela <aapo.makela@nokia.com> Tue, 22 Dec 2009 14:27:32 +0200 + +libconninet (0.26) unstable; urgency=low + + * Added possibility to specify different signal path for DBusDispatcher. + + -- Aapo Makela <aapo.makela@nokia.com> Wed, 25 Nov 2009 14:27:34 +0200 + +libconninet (0.25) unstable; urgency=low + + * Fixes: NB#146450 - All scan results were not returned to the caller. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 16 Nov 2009 17:23:15 +0200 + +libconninet (0.24) unstable; urgency=low + + * Wait all scan results for all network types in Maemo::Icd::scan() + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Fri, 6 Nov 2009 14:45:23 +0200 + +libconninet (0.23) unstable; urgency=low + + * Fixes: NB#143361 - Assert failure in session class for GPRS IAP. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 19 Oct 2009 16:00:14 +0300 + +libconninet (0.22) unstable; urgency=low + + * Fixed the error checking if scan returns 0 results. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 7 Oct 2009 13:50:27 +0300 + +libconninet (0.21) unstable; urgency=low + + * Support multiple DBusDispatcher classes at the same time. This is + required by Maemo::Icd class so that multiple instances of it can + be used the same time. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 5 Oct 2009 16:33:43 +0300 + +libconninet (0.20) unstable; urgency=low + + * Fixed memory leak in IAPConf::setValue() + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Fri, 2 Oct 2009 13:02:21 +0300 + +libconninet (0.19) unstable; urgency=low + + * Fixed connect_req to one specific IAP in Icd class. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 29 Sep 2009 17:02:46 +0300 + +libconninet (0.18) unstable; urgency=low + + * Make sure the library will not abort in Icd class if scan does + not return any results. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 22 Sep 2009 17:00:12 +0300 + +libconninet (0.17) unstable; urgency=low + + * Added IAP monitoring support. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 21 Sep 2009 16:29:31 +0300 + +libconninet (0.16) unstable; urgency=low + + * Disabled the old osso-ic dbus interface as it is currently not used. + * Fixed the addrinfo request, now addresses are returned correctly to + the caller. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 17 Sep 2009 15:56:13 +0300 + +libconninet (0.15) unstable; urgency=low + + * Enabling state_req, statistics_req and addrinfo_req support + functions in Maemo::Icd as the corresponding DBUS API functions are + fixed in icd2 v0.89 + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Fri, 24 Jul 2009 15:23:02 +0300 + +libconninet (0.14) unstable; urgency=low + + * Icd statistics support added. + * Icd address information support added. + * Icd scan method does not return the final (and empty) result any more. + * Added initial unit test implementation for Icd class. + * Some of the status functions in Icd class disabled because of issues + in icd2 and the dbus api. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 23 Jul 2009 11:03:05 +0300 + +libconninet (0.13) unstable; urgency=low + + * Added API to get all the configured IAPs. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 21 Jul 2009 09:47:18 +0300 + +libconninet (0.12) unstable; urgency=low + + * Replaced duivaluespace by Dui in pkg-config file because the + duivaluespace is deprecated. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 20 Jul 2009 16:00:10 +0300 + +libconninet (0.11) unstable; urgency=low + + * Using libdui instead of libduivaluespace because it is deprecated. + * The IAPConf::clear() uses native gconf API instead of launching gconftool + * Check that state_req call returned list and the list contains entries + before trying to access it. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 20 Jul 2009 14:55:15 +0300 + +libconninet (0.10) unstable; urgency=low + + * connect() did not return ok when connection succeeded. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 25 Jun 2009 09:31:21 +0300 + +libconninet (0.9) unstable; urgency=low + + * Connection timeout set to 2.5min, same as in fremantle. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 17 Jun 2009 13:36:40 +0300 + +libconninet (0.8) unstable; urgency=low + + * Fix state_req signal received from Icd + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 11 Jun 2009 17:19:33 +0300 + +libconninet (0.7) unstable; urgency=low + + * Icd disconnect and select reqs are made synchronous as we do not + wait the return status. The previous async version was causing core + dumps if Icd class was destroyed too early. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 11 Jun 2009 11:52:36 +0300 + +libconninet (0.6) unstable; urgency=low + + * Fixed the libconninet0-dev dependencies. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 8 Jun 2009 10:47:56 +0300 + +libconninet (0.5) unstable; urgency=low + + * Fixed missing QObject connect functions. + * Fixed IAPConf to return invalid QVariant if the value does not exist. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Mon, 01 Jun 2009 13:58:53 +0300 + +libconninet (0.4) unstable; urgency=low + + * Fixed QObject signal setting for Maemo::Icd + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 20 May 2009 13:51:11 +0300 + +libconninet (0.3) unstable; urgency=low + + * Refactoring classes + * Added IAPConf class. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Thu, 14 May 2009 13:24:11 +0300 + +libconninet (0.2) unstable; urgency=low + + * Fixed pkgconfig file which had wrong dependency + * Added DBus array and struct support to DBusDispatcher. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Wed, 13 May 2009 12:11:00 +0300 + +libconninet (0.1) unstable; urgency=low + + * Initial Release. + + -- Jukka Rissanen <jukka.rissanen@nokia.com> Tue, 12 May 2009 16:10:27 +0200 diff --git a/src/3rdparty/libconninet/debian/compat b/src/3rdparty/libconninet/debian/compat new file mode 100644 index 0000000..b8626c4 --- /dev/null +++ b/src/3rdparty/libconninet/debian/compat @@ -0,0 +1 @@ +4 diff --git a/src/3rdparty/libconninet/debian/control b/src/3rdparty/libconninet/debian/control new file mode 100644 index 0000000..2db660f --- /dev/null +++ b/src/3rdparty/libconninet/debian/control @@ -0,0 +1,39 @@ +Source: libconninet +Priority: optional +Maintainer: Jukka Rissanen <jukka.rissanen@nokia.com> +Build-Depends: debhelper (>= 4.0.0), autotools-dev, libglib2.0-dev (>= 2.8), + libdbus-1-dev (>= 0.60), libconnsettings0-dev (>= 0.4), icd2-osso-ic-dev, + icd2-dev, libqt4-dev, libgconf2-dev (>> 2.6.4), libgq-gconf-dev +Standards-Version: 3.6.2 +Section: libs + +Package: libconninet0-dev +Section: libdevel +Architecture: any +Depends: libconninet0 (= ${Source-Version}), libdbus-1-dev (>= 0.60), + libglib2.0-dev (>= 2.8), libconnsettings0-dev (>= 0.4), libqt4-dev, + icd2-osso-ic-dev, icd2-dev, libgconf2-dev (>> 2.6.4), libgq-gconf-dev +Description: Internet Connectivity support library development files + Internet Connectivity support library (libconninet) provides common + support functions for connecting to icd2 and accessing configuration + data. + . + This package contains the header files. + +Package: libconninet0 +Section: libs +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Internet Connectivity support library + Internet Connectivity support library (libconninet) provides common + support functions for connecting to icd2 and accessing configuration + data. + . + This package contains the shared libraries. + +Package: libconninet0-dbg +Section: libs +Architecture: any +Depends: libconninet0 (= ${Source-Version}), ${shlibs:Depends}, ${misc:Depends} +Description: Debug symbols for the Internet Connectivity support library + Internet Connectivity support library (libconninet) debug symbols. diff --git a/src/3rdparty/libconninet/debian/copyright b/src/3rdparty/libconninet/debian/copyright new file mode 100644 index 0000000..97e8e68 --- /dev/null +++ b/src/3rdparty/libconninet/debian/copyright @@ -0,0 +1,19 @@ +libconninet - Internet Connectivity support library + +Copyright (C) 2009 Nokia Corporation. All rights reserved. + +Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + +This library is free software; you can redistribute it and/or modify +it under the terms of the GNU Lesser General Public License version 2.1 +as published by the Free Software Foundation. + +This library is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +02110-1301 USA diff --git a/src/3rdparty/libconninet/debian/libconninet0-dev.dirs b/src/3rdparty/libconninet/debian/libconninet0-dev.dirs new file mode 100644 index 0000000..4418816 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0-dev.dirs @@ -0,0 +1,2 @@ +usr/lib +usr/include diff --git a/src/3rdparty/libconninet/debian/libconninet0-dev.files b/src/3rdparty/libconninet/debian/libconninet0-dev.files new file mode 100644 index 0000000..78bbac8 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0-dev.files @@ -0,0 +1,4 @@ +usr/include/* +usr/lib/lib*.so +usr/lib/pkgconfig/* +usr/share/pkgconfig/* diff --git a/src/3rdparty/libconninet/debian/libconninet0.dirs b/src/3rdparty/libconninet/debian/libconninet0.dirs new file mode 100644 index 0000000..6845771 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0.dirs @@ -0,0 +1 @@ +usr/lib diff --git a/src/3rdparty/libconninet/debian/libconninet0.files b/src/3rdparty/libconninet/debian/libconninet0.files new file mode 100644 index 0000000..d0dbfd1 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0.files @@ -0,0 +1 @@ +usr/lib/lib*.so.* diff --git a/src/3rdparty/libconninet/debian/rules b/src/3rdparty/libconninet/debian/rules new file mode 100755 index 0000000..2a3d395 --- /dev/null +++ b/src/3rdparty/libconninet/debian/rules @@ -0,0 +1,123 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif + +# shared library versions, option 1 +#version=2.0.5 +#major=2 +# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so +version=`ls src/.libs/lib*.so.* | \ + awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'` +major=`ls src/.libs/lib*.so.* | \ + awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'` + +configure: configure.ac debian/changelog + -./autogen.sh + +config.status: configure + dh_testdir + # Add here commands to configure the package. + CFLAGS="$(CFLAGS)" ./configure \ + --host=$(DEB_HOST_GNU_TYPE) \ + --build=$(DEB_BUILD_GNU_TYPE) \ + --prefix=/usr \ + --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info + + +build: build-stamp +build-stamp: config.status + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + -$(MAKE) distclean +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/tmp + $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp + + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_movefiles + dh_installchangelogs ChangeLog + dh_installdocs + dh_installexamples +# dh_install +# dh_installmenu +# dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link + dh_strip --dbg-package=libconninet0 + dh_compress + dh_fixperms +# dh_perl +# dh_python + dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install diff --git a/src/3rdparty/libconninet/doxygen.cfg.in b/src/3rdparty/libconninet/doxygen.cfg.in new file mode 100644 index 0000000..80a4c8d --- /dev/null +++ b/src/3rdparty/libconninet/doxygen.cfg.in @@ -0,0 +1,1147 @@ +# Doxyfile 1.3.7 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "Internet Connectivity Support Library" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 2 levels of 10 sub-directories under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of source +# files, where putting all generated files in the same directory would otherwise +# cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, +# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en +# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, +# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is used +# as the annotated text. Otherwise, the brief description is used as-is. If left +# blank, the following values are used ("$name" is automatically replaced with the +# name of the entity): "The $name class" "The $name widget" "The $name file" +# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited +# members of a class in the documentation of that class as if those members were +# ordinary class members. Constructors, destructors and assignment operators of +# the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = YES + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = YES + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = conic/conic.h \ + conic/conicconnection.h \ + conic/conicconnectionevent.h \ + conic/conicevent.h \ + conic/coniciap.h \ + conic/conicstatisticsevent.h + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp +# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories +# that are symbolic links (a Unix filesystem feature) are excluded from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. + +INPUT_FILTER = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_PREDEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse the +# parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or +# super classes. Setting the tag to NO turns the diagrams off. Note that this +# option is superseded by the HAVE_DOT option below. This is only a fallback. It is +# recommended to install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found on the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes that +# lay further from the root node will be omitted. Note that setting this option to +# 1 or 2 may greatly reduce the computation time needed for large code bases. Also +# note that a graph may be further truncated if the graph's image dimensions are +# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). +# If 0 is used for the depth value (the default), the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/src/3rdparty/libconninet/src/Makefile.am b/src/3rdparty/libconninet/src/Makefile.am new file mode 100644 index 0000000..be7a1e5 --- /dev/null +++ b/src/3rdparty/libconninet/src/Makefile.am @@ -0,0 +1,36 @@ +DEFS = -DDBUS_API_SUBJECT_TO_CHANGE -DGCONF_DISABLE_DEPRECATED +INCLUDES = @GLIB_CFLAGS@ @DBUS_CFLAGS@ @GCONF_CFLAGS@ @OSSO_IC_CFLAGS@ @ICD_DEV_CFLAGS@ @QTCORE_CFLAGS@ @QTNETWORK_CFLAGS@ @QTDBUS_CFLAGS@ @QGCONF_CFLAGS@ @CONNSETTINGS_CFLAGS@ +LIBS = @GLIB_LIBS@ @DBUS_LIBS@ @GCONF_LIBS@ @OSSO_IC_LIBS@ @ICD_DEV_LIBS@ @QTCORE_LIBS@ @QTDBUS_LIBS@ @QTNETWORK_CFLAGS@ @QGCONF_LIBS@ @CONNSETTINGS_LIBS@ + +AM_CFLAGS = $(CONCFLAGS) + +lib_LTLIBRARIES = libconninet.la +libconninet_la_SOURCES = \ + maemo_icd.cpp \ + dbusdispatcher.cpp \ + iapconf.cpp \ + iapmonitor.cpp \ + proxyconf.cpp + +#libconninet_la_LDFLAGS = -version-info 0:0:0 + +conninetincludedir = $(includedir)/conninet +conninetinclude_HEADERS = \ + maemo_icd.h \ + dbusdispatcher.h \ + iapconf.h \ + iapmonitor.h \ + proxyconf.h + +nodist_libconninet_la_SOURCES = \ + moc_maemo_icd.cpp \ + moc_dbusdispatcher.cpp + +MAINTAINERCLEANFILES = Makefile.in + +# This rule lets GNU make create any moc_*.cpp from the equivalent *.h +moc_%.cpp: %.h + moc $< -o $@ + +# This line ensures that generated moc files are deleted when we make clean. +CLEANFILES = *_moc.cpp *.loT diff --git a/src/3rdparty/libconninet/src/dbusdispatcher.cpp b/src/3rdparty/libconninet/src/dbusdispatcher.cpp new file mode 100644 index 0000000..7581982 --- /dev/null +++ b/src/3rdparty/libconninet/src/dbusdispatcher.cpp @@ -0,0 +1,611 @@ +/* * This file is part of conninet * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Aapo Makela <aapo.makela@nokia.com> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <QDebug> +#include <QtCore> +#include <poll.h> +#include <dbus/dbus.h> +#include <dbus/dbus-glib-lowlevel.h> +#include <glib.h> +#include "dbusdispatcher.h" + +namespace Maemo { + +/*! + \class DBusDispatcher + + \brief DBusDispatcher is a class, which is able to send DBUS method call + messages and receive unicast signals from DBUS object. +*/ + +class DBusDispatcherPrivate +{ +public: + DBusDispatcherPrivate(const QString& service, + const QString& path, + const QString& interface, + const QString& signalPath) + : service(service), path(path), interface(interface), + signalPath(signalPath), connection(0) + { + memset(&signal_vtable, 0, sizeof(signal_vtable)); + } + + ~DBusDispatcherPrivate() + { + foreach(DBusPendingCall *call, pending_calls) { + dbus_pending_call_cancel(call); + dbus_pending_call_unref(call); + } + } + + QString service; + QString path; + QString interface; + QString signalPath; + struct DBusConnection *connection; + QList<DBusPendingCall *> pending_calls; + struct DBusObjectPathVTable signal_vtable; +}; + +static bool constantVariantList(const QVariantList& variantList) { + // Special case, empty list == empty struct + if (variantList.isEmpty()) { + return false; + } else { + QVariant::Type type = variantList[0].type(); + // Iterate items in the list and check if they are same type + foreach(QVariant variant, variantList) { + if (variant.type() != type) { + return false; + } + } + } + return true; +} + +static QString variantToSignature(const QVariant& argument, + bool constantList = true) { + switch (argument.type()) { + case QVariant::Bool: + return "b"; + case QVariant::ByteArray: + return "ay"; + case QVariant::Char: + return "y"; + case QVariant::Int: + return "i"; + case QVariant::UInt: + return "u"; + case QVariant::StringList: + return "as"; + case QVariant::String: + return "s"; + case QVariant::LongLong: + return "x"; + case QVariant::ULongLong: + return "t"; + case QVariant::List: + { + QString signature; + QVariantList variantList = argument.toList(); + if (!constantList) { + signature += DBUS_STRUCT_BEGIN_CHAR_AS_STRING; + foreach(QVariant listItem, variantList) { + signature += variantToSignature(listItem); + } + signature += DBUS_STRUCT_END_CHAR_AS_STRING; + } else { + if (variantList.isEmpty()) + return ""; + signature = "a" + variantToSignature(variantList[0]); + } + + return signature; + } + default: + qDebug() << "Unsupported variant type: " << argument.type(); + break; + } + + return ""; +} + +static bool appendVariantToDBusMessage(const QVariant& argument, + DBusMessageIter *dbus_iter) { + int idx = 0; + DBusMessageIter array_iter; + QStringList str_list; + dbus_bool_t bool_data; + dbus_int32_t int32_data; + dbus_uint32_t uint32_data; + dbus_int64_t int64_data; + dbus_uint64_t uint64_data; + char *str_data; + char char_data; + + switch (argument.type()) { + + case QVariant::Bool: + bool_data = argument.toBool(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_BOOLEAN, + &bool_data); + break; + + case QVariant::ByteArray: + str_data = argument.toByteArray().data(); + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, + DBUS_TYPE_BYTE_AS_STRING, &array_iter); + dbus_message_iter_append_fixed_array(&array_iter, + DBUS_TYPE_BYTE, + &str_data, + argument.toByteArray().size()); + dbus_message_iter_close_container(dbus_iter, &array_iter); + break; + + case QVariant::Char: + char_data = argument.toChar().toAscii(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_BYTE, + &char_data); + break; + + case QVariant::Int: + int32_data = argument.toInt(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_INT32, + &int32_data); + break; + + case QVariant::String: + str_data = argument.toString().toLatin1().data(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_STRING, + &str_data); + break; + + case QVariant::StringList: + str_list = argument.toStringList(); + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, + "s", &array_iter); + for (idx = 0; idx < str_list.size(); idx++) { + str_data = str_list.at(idx).toLatin1().data(); + dbus_message_iter_append_basic(&array_iter, + DBUS_TYPE_STRING, + &str_data); + } + dbus_message_iter_close_container(dbus_iter, &array_iter); + break; + + case QVariant::UInt: + uint32_data = argument.toUInt(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_UINT32, + &uint32_data); + break; + + case QVariant::ULongLong: + uint64_data = argument.toULongLong(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_UINT64, + &uint64_data); + break; + + case QVariant::LongLong: + int64_data = argument.toLongLong(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_INT64, + &int64_data); + break; + + case QVariant::List: + { + QVariantList variantList = argument.toList(); + bool constantList = constantVariantList(variantList); + DBusMessageIter array_iter; + + // List is mapped either as an DBUS array (all items same type) + // DBUS struct (variable types) depending on constantList + if (constantList) { + // Resolve the signature for the first item + QString signature = ""; + if (!variantList.isEmpty()) { + signature = variantToSignature( + variantList[0], + constantVariantList(variantList[0].toList())); + } + + // Mapped as DBUS array + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, + signature.toAscii(), + &array_iter); + + foreach(QVariant listItem, variantList) { + appendVariantToDBusMessage(listItem, &array_iter); + } + + dbus_message_iter_close_container(dbus_iter, &array_iter); + } else { + // Mapped as DBUS struct + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_STRUCT, + NULL, + &array_iter); + + foreach(QVariant listItem, variantList) { + appendVariantToDBusMessage(listItem, &array_iter); + } + + dbus_message_iter_close_container(dbus_iter, &array_iter); + } + + break; + } + default: + qDebug() << "Unsupported variant type: " << argument.type(); + break; + } + + return true; +} + +static QVariant getVariantFromDBusMessage(DBusMessageIter *iter) { + dbus_bool_t bool_data; + dbus_int32_t int32_data; + dbus_uint32_t uint32_data; + dbus_int64_t int64_data; + dbus_uint64_t uint64_data; + char *str_data; + char char_data; + int argtype = dbus_message_iter_get_arg_type(iter); + + switch (argtype) { + + case DBUS_TYPE_BOOLEAN: + { + dbus_message_iter_get_basic(iter, &bool_data); + QVariant variant((bool)bool_data); + return variant; + } + + case DBUS_TYPE_ARRAY: + { + // Handle all arrays here + int elem_type = dbus_message_iter_get_element_type(iter); + DBusMessageIter array_iter; + + dbus_message_iter_recurse(iter, &array_iter); + + if (elem_type == DBUS_TYPE_BYTE) { + QByteArray byte_array; + do { + dbus_message_iter_get_basic(&array_iter, &char_data); + byte_array.append(char_data); + } while (dbus_message_iter_next(&array_iter)); + QVariant variant(byte_array); + return variant; + } else if (elem_type == DBUS_TYPE_STRING) { + QStringList str_list; + do { + dbus_message_iter_get_basic(&array_iter, &str_data); + str_list.append(str_data); + } while (dbus_message_iter_next(&array_iter)); + QVariant variant(str_list); + return variant; + } else { + QVariantList variantList; + do { + variantList << getVariantFromDBusMessage(&array_iter); + } while (dbus_message_iter_next(&array_iter)); + QVariant variant(variantList); + return variant; + } + break; + } + + case DBUS_TYPE_BYTE: + { + dbus_message_iter_get_basic(iter, &char_data); + QChar ch(char_data); + QVariant variant(ch); + return variant; + } + + case DBUS_TYPE_INT32: + { + dbus_message_iter_get_basic(iter, &int32_data); + QVariant variant((int)int32_data); + return variant; + } + + case DBUS_TYPE_UINT32: + { + dbus_message_iter_get_basic(iter, &uint32_data); + QVariant variant((uint)uint32_data); + return variant; + } + + case DBUS_TYPE_STRING: + { + dbus_message_iter_get_basic(iter, &str_data); + QString str(str_data); + QVariant variant(str); + return variant; + } + + case DBUS_TYPE_INT64: + { + dbus_message_iter_get_basic(iter, &int64_data); + QVariant variant((qlonglong)int64_data); + return variant; + } + + case DBUS_TYPE_UINT64: + { + dbus_message_iter_get_basic(iter, &uint64_data); + QVariant variant((qulonglong)uint64_data); + return variant; + } + + case DBUS_TYPE_STRUCT: + { + // Handle all structs here + DBusMessageIter struct_iter; + dbus_message_iter_recurse(iter, &struct_iter); + + QVariantList variantList; + do { + variantList << getVariantFromDBusMessage(&struct_iter); + } while (dbus_message_iter_next(&struct_iter)); + QVariant variant(variantList); + return variant; + } + + default: + qDebug() << "Unsupported DBUS type: " << argtype; + } + + return QVariant(); +} + +static DBusHandlerResult signalHandler (DBusConnection *connection, + DBusMessage *message, + void *object_ref) { + (void)connection; + QString interface; + QString signal; + DBusDispatcher *dispatcher = (DBusDispatcher *)object_ref; + + if (dbus_message_get_type(message) == DBUS_MESSAGE_TYPE_SIGNAL) { + interface = dbus_message_get_interface(message); + signal = dbus_message_get_member(message); + + QList<QVariant> arglist; + DBusMessageIter dbus_iter; + + if (dbus_message_iter_init(message, &dbus_iter)) { + // Read return arguments + while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { + arglist << getVariantFromDBusMessage(&dbus_iter); + dbus_message_iter_next(&dbus_iter); + } + } + + dispatcher->emitSignalReceived(interface, signal, arglist); + return DBUS_HANDLER_RESULT_HANDLED; + } + (void)message; + return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; +} + +DBusDispatcher::DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + QObject *parent) + : QObject(parent), + d_ptr(new DBusDispatcherPrivate(service, path, interface, path)) { + setupDBus(); +} + +DBusDispatcher::DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + const QString& signalPath, + QObject *parent) + : QObject(parent), + d_ptr(new DBusDispatcherPrivate(service, path, interface, signalPath)) { + setupDBus(); +} + +DBusDispatcher::~DBusDispatcher() +{ + if (d_ptr->connection) { + dbus_connection_close(d_ptr->connection); + dbus_connection_unref(d_ptr->connection); + } + delete d_ptr; +} + +void DBusDispatcher::setupDBus() +{ + d_ptr->connection = dbus_bus_get_private(DBUS_BUS_SYSTEM, NULL); + + if (d_ptr->connection == NULL) + qDebug() << "Unable to get DBUS connection!"; + else { + d_ptr->signal_vtable.message_function = signalHandler; + + dbus_connection_set_exit_on_disconnect(d_ptr->connection, FALSE); + dbus_connection_setup_with_g_main(d_ptr->connection, NULL); + dbus_connection_register_object_path(d_ptr->connection, + d_ptr->signalPath.toLatin1(), + &d_ptr->signal_vtable, + this); + } +} + +static DBusMessage *prepareDBusCall(const QString& service, + const QString& path, + const QString& interface, + const QString& method, + const QVariant& arg1 = QVariant(), + const QVariant& arg2 = QVariant(), + const QVariant& arg3 = QVariant(), + const QVariant& arg4 = QVariant(), + const QVariant& arg5 = QVariant(), + const QVariant& arg6 = QVariant(), + const QVariant& arg7 = QVariant(), + const QVariant& arg8 = QVariant()) +{ + DBusMessage *message = dbus_message_new_method_call(service.toLatin1(), + path.toLatin1(), + interface.toLatin1(), + method.toLatin1()); + DBusMessageIter dbus_iter; + + // Append variants to DBUS message + QList<QVariant> arglist; + if (arg1.isValid()) arglist << arg1; + if (arg2.isValid()) arglist << arg2; + if (arg3.isValid()) arglist << arg3; + if (arg4.isValid()) arglist << arg4; + if (arg5.isValid()) arglist << arg5; + if (arg6.isValid()) arglist << arg6; + if (arg7.isValid()) arglist << arg7; + if (arg8.isValid()) arglist << arg8; + + dbus_message_iter_init_append (message, &dbus_iter); + + while (!arglist.isEmpty()) { + QVariant argument = arglist.takeFirst(); + appendVariantToDBusMessage(argument, &dbus_iter); + } + + return message; +} + +QList<QVariant> DBusDispatcher::call(const QString& method, + const QVariant& arg1, + const QVariant& arg2, + const QVariant& arg3, + const QVariant& arg4, + const QVariant& arg5, + const QVariant& arg6, + const QVariant& arg7, + const QVariant& arg8) { + DBusMessageIter dbus_iter; + DBusMessage *message = prepareDBusCall(d_ptr->service, d_ptr->path, + d_ptr->interface, method, + arg1, arg2, arg3, arg4, arg5, + arg6, arg7, arg8); + DBusMessage *reply = dbus_connection_send_with_reply_and_block( + d_ptr->connection, + message, -1, NULL); + dbus_message_unref(message); + + QList<QVariant> replylist; + if (reply != NULL && dbus_message_iter_init(reply, &dbus_iter)) { + // Read return arguments + while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { + replylist << getVariantFromDBusMessage(&dbus_iter); + dbus_message_iter_next(&dbus_iter); + } + } + if (reply != NULL) dbus_message_unref(reply); + return replylist; +} + +class PendingCallInfo { +public: + QString method; + DBusDispatcher *dispatcher; + DBusDispatcherPrivate *priv; +}; + +static void freePendingCallInfo(void *memory) { + PendingCallInfo *info = (PendingCallInfo *)memory; + delete info; +} + +static void pendingCallFunction (DBusPendingCall *pending, + void *memory) { + PendingCallInfo *info = (PendingCallInfo *)memory; + QString errorStr; + QList<QVariant> replyList; + DBusMessage *reply = dbus_pending_call_steal_reply (pending); + + Q_ASSERT(reply != NULL); + + if (dbus_message_get_type(reply) == DBUS_MESSAGE_TYPE_ERROR) { + errorStr = dbus_message_get_error_name (reply); + } else { + DBusMessageIter dbus_iter; + dbus_message_iter_init(reply, &dbus_iter); + // Read return arguments + while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { + replyList << getVariantFromDBusMessage(&dbus_iter); + dbus_message_iter_next(&dbus_iter); + } + } + + info->priv->pending_calls.removeOne(pending); + info->dispatcher->emitCallReply(info->method, replyList, errorStr); + dbus_message_unref(reply); + dbus_pending_call_unref(pending); +} + +bool DBusDispatcher::callAsynchronous(const QString& method, + const QVariant& arg1, + const QVariant& arg2, + const QVariant& arg3, + const QVariant& arg4, + const QVariant& arg5, + const QVariant& arg6, + const QVariant& arg7, + const QVariant& arg8) { + DBusMessage *message = prepareDBusCall(d_ptr->service, d_ptr->path, + d_ptr->interface, method, + arg1, arg2, arg3, arg4, arg5, + arg6, arg7, arg8); + DBusPendingCall *call = NULL; + dbus_bool_t ret = dbus_connection_send_with_reply(d_ptr->connection, + message, &call, -1); + PendingCallInfo *info = new PendingCallInfo; + info->method = method; + info->dispatcher = this; + info->priv = d_ptr; + + dbus_pending_call_set_notify(call, pendingCallFunction, info, freePendingCallInfo); + d_ptr->pending_calls.append(call); + return (bool)ret; +} + +void DBusDispatcher::emitSignalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args) { + emit signalReceived(interface, signal, args); } + +void DBusDispatcher::emitCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error) { + emit callReply(method, args, error); } + +void DBusDispatcher::synchronousDispatch(int timeout_ms) +{ + dbus_connection_read_write_dispatch(d_ptr->connection, timeout_ms); +} + +} // Maemo namespace + diff --git a/src/3rdparty/libconninet/src/dbusdispatcher.h b/src/3rdparty/libconninet/src/dbusdispatcher.h new file mode 100644 index 0000000..2f71b6f --- /dev/null +++ b/src/3rdparty/libconninet/src/dbusdispatcher.h @@ -0,0 +1,91 @@ +/* * This file is part of conn-dui-settings-inet * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Aapo Makela <aapo.makela@nokia.com> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef DBUSDISPATCHER_H +#define DBUSDISPATCHER_H + +#include <QObject> +#include <QVariant> + +namespace Maemo { + +class DBusDispatcherPrivate; +class DBusDispatcher : public QObject +{ + Q_OBJECT + +public: + DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + QObject *parent = 0); + DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + const QString& signalPath, + QObject *parent = 0); + ~DBusDispatcher(); + + QList<QVariant> call(const QString& method, + const QVariant& arg1 = QVariant(), + const QVariant& arg2 = QVariant(), + const QVariant& arg3 = QVariant(), + const QVariant& arg4 = QVariant(), + const QVariant& arg5 = QVariant(), + const QVariant& arg6 = QVariant(), + const QVariant& arg7 = QVariant(), + const QVariant& arg8 = QVariant()); + bool callAsynchronous(const QString& method, + const QVariant& arg1 = QVariant(), + const QVariant& arg2 = QVariant(), + const QVariant& arg3 = QVariant(), + const QVariant& arg4 = QVariant(), + const QVariant& arg5 = QVariant(), + const QVariant& arg6 = QVariant(), + const QVariant& arg7 = QVariant(), + const QVariant& arg8 = QVariant()); + void emitSignalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args); + void emitCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error = ""); + void synchronousDispatch(int timeout_ms); + +Q_SIGNALS: + void signalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args); + void callReply(const QString& method, + const QList<QVariant>& args, + const QString& error); + +protected: + void setupDBus(); + +private: + DBusDispatcherPrivate *d_ptr; +}; + +} // Maemo namespace + +#endif diff --git a/src/3rdparty/libconninet/src/iapconf.cpp b/src/3rdparty/libconninet/src/iapconf.cpp new file mode 100644 index 0000000..2e77fa5 --- /dev/null +++ b/src/3rdparty/libconninet/src/iapconf.cpp @@ -0,0 +1,299 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Aapo Makela <aapo.makela@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include <stdlib.h> +#include <string.h> +#include <conn_settings.h> + +#include "iapconf.h" + +#define QSTRING_TO_CONST_CSTR(str) \ + str.toUtf8().constData() + +namespace Maemo { + +class IAPConfPrivate { +public: + ConnSettings *settings; + + ConnSettingsValue *variantToValue(const QVariant &variant); + QVariant valueToVariant(ConnSettingsValue *value); +}; + +ConnSettingsValue *IAPConfPrivate::variantToValue(const QVariant &variant) +{ + // Convert variant to ConnSettingsValue + ConnSettingsValue *value = conn_settings_value_new(); + if (value == 0) { + qWarning("IAPConf: Unable to create new ConnSettingsValue"); + return 0; + } + + switch(variant.type()) { + + case QVariant::Invalid: + value->type = CONN_SETTINGS_VALUE_INVALID; + break; + + case QVariant::String: { + char *valueStr = strdup(QSTRING_TO_CONST_CSTR(variant.toString())); + value->type = CONN_SETTINGS_VALUE_STRING; + value->value.string_val = valueStr; + break; + } + + case QVariant::Int: + value->type = CONN_SETTINGS_VALUE_INT; + value->value.int_val = variant.toInt(); + break; + + case QMetaType::Float: + case QVariant::Double: + value->type = CONN_SETTINGS_VALUE_DOUBLE; + value->value.double_val = variant.toDouble(); + break; + + case QVariant::Bool: + value->type = CONN_SETTINGS_VALUE_BOOL; + value->value.bool_val = variant.toBool() ? 1 : 0; + break; + + case QVariant::ByteArray: { + QByteArray array = variant.toByteArray(); + value->type = CONN_SETTINGS_VALUE_BYTE_ARRAY; + value->value.byte_array.len = array.size(); + value->value.byte_array.val = (unsigned char *)malloc(array.size()); + memcpy(value->value.byte_array.val, array.constData(), array.size()); + break; + } + + case QVariant::List: { + QVariantList list = variant.toList(); + ConnSettingsValue **list_val = (ConnSettingsValue **)malloc( + (list.size() + 1) * sizeof(ConnSettingsValue *)); + + for (int idx = 0; idx < list.size(); idx++) { + list_val[idx] = variantToValue(list.at(idx)); + } + list_val[list.size()] = 0; + + value->type = CONN_SETTINGS_VALUE_LIST; + value->value.list_val = list_val; + break; + } + + default: + qWarning("IAPConf: Can not handle QVariant of type %d", + variant.type()); + conn_settings_value_destroy(value); + return 0; + } + + return value; +} + +QVariant IAPConfPrivate::valueToVariant(ConnSettingsValue *value) +{ + if (value == 0 || value->type == CONN_SETTINGS_VALUE_INVALID) { + return QVariant(); + } + + switch(value->type) { + + case CONN_SETTINGS_VALUE_BOOL: + return QVariant(value->value.bool_val ? true : false); + + case CONN_SETTINGS_VALUE_STRING: + return QVariant(QString(value->value.string_val)); + + case CONN_SETTINGS_VALUE_DOUBLE: + return QVariant(value->value.double_val); + + case CONN_SETTINGS_VALUE_INT: + return QVariant(value->value.int_val); + + case CONN_SETTINGS_VALUE_LIST: { + // At least with GConf backend connsettings returns byte array as list + // of ints, first check for that case + if (value->value.list_val && value->value.list_val[0]) { + bool canBeConvertedToByteArray = true; + for (int idx = 0; value->value.list_val[idx]; idx++) { + ConnSettingsValue *val = value->value.list_val[idx]; + if (val->type != CONN_SETTINGS_VALUE_INT + || val->value.int_val > 255 + || val->value.int_val < 0) { + canBeConvertedToByteArray = false; + break; + } + } + + if (canBeConvertedToByteArray) { + QByteArray array; + for (int idx = 0; value->value.list_val[idx]; idx++) { + array.append(value->value.list_val[idx]->value.int_val); + } + return array; + } + + // Create normal list + QVariantList list; + for (int idx = 0; value->value.list_val[idx]; idx++) { + list.append(valueToVariant(value->value.list_val[idx])); + } + return list; + } + } + + case CONN_SETTINGS_VALUE_BYTE_ARRAY: + return QByteArray::fromRawData((char *)value->value.byte_array.val, + value->value.byte_array.len); + + default: + return QVariant(); + } +} + +// Public class implementation + +IAPConf::IAPConf(const QString &iap_id) + : d_ptr(new IAPConfPrivate) +{ + d_ptr->settings = conn_settings_open(CONN_SETTINGS_CONNECTION, + QSTRING_TO_CONST_CSTR(iap_id)); + if (d_ptr->settings == 0) { + qWarning("IAPConf: Unable to open ConnSettings for %s", + QSTRING_TO_CONST_CSTR(iap_id)); + } +} + +IAPConf::~IAPConf() +{ + conn_settings_close(d_ptr->settings); + delete d_ptr; +} + +void IAPConf::setValue(const QString& key, const QVariant& value) +{ + // Invalid value means unsetting the given key + if (!value.isValid()) { + int err = conn_settings_unset(d_ptr->settings, + QSTRING_TO_CONST_CSTR(key)); + if (err != CONN_SETTINGS_E_NO_ERROR) { + qWarning("IAPConf: unable to unset key %s: %s", + QSTRING_TO_CONST_CSTR(key), + conn_settings_error_text((ConnSettingsError)err)); + } + return; + } + + // Convert value to ConnSettingsValue + ConnSettingsValue *val = d_ptr->variantToValue(value); + if (val == 0) return; + + // Set value and handle errors + int error = conn_settings_set(d_ptr->settings, + QSTRING_TO_CONST_CSTR(key), + val); + if (error != CONN_SETTINGS_E_NO_ERROR) { + qWarning("IAPConf: error in setting key %s: %s", + QSTRING_TO_CONST_CSTR(key), + conn_settings_error_text((ConnSettingsError)error)); + } + + // Destroy value + conn_settings_value_destroy(val); + return; +} + +void IAPConf::set(const QString& key1, const QVariant& value1, + const QString& key2, const QVariant& value2, + const QString& key3, const QVariant& value3, + const QString& key4, const QVariant& value4, + const QString& key5, const QVariant& value5, + const QString& key6, const QVariant& value6, + const QString& key7, const QVariant& value7, + const QString& key8, const QVariant& value8, + const QString& key9, const QVariant& value9, + const QString& key10, const QVariant& value10) +{ + if (!key1.isEmpty()) setValue(key1, value1); + if (!key2.isEmpty()) setValue(key2, value2); + if (!key3.isEmpty()) setValue(key3, value3); + if (!key4.isEmpty()) setValue(key4, value4); + if (!key5.isEmpty()) setValue(key5, value5); + if (!key6.isEmpty()) setValue(key6, value6); + if (!key7.isEmpty()) setValue(key7, value7); + if (!key8.isEmpty()) setValue(key8, value8); + if (!key9.isEmpty()) setValue(key9, value9); + if (!key10.isEmpty()) setValue(key10, value10); +} + +QVariant IAPConf::value(const QString& key) const +{ + ConnSettingsValue *val = conn_settings_get(d_ptr->settings, + QSTRING_TO_CONST_CSTR(key)); + + QVariant variant = d_ptr->valueToVariant(val); + conn_settings_value_destroy(val); + return variant; +} + +void IAPConf::clear(const char *default_path) +{ + Q_UNUSED(default_path); // default path is unused + + int error = conn_settings_remove(d_ptr->settings); + if (error != CONN_SETTINGS_E_NO_ERROR) { + qWarning("IAPConf: Error when removing IAP: %s", + conn_settings_error_text((ConnSettingsError)error)); + } +} + +void IAPConf::clearAll() +{ + ConnSettings *settings = conn_settings_open(CONN_SETTINGS_CONNECTION, + NULL); + conn_settings_remove(settings); + conn_settings_close(settings); +} + + +void IAPConf::getAll(QList<QString> &all_iaps, bool return_path) +{ + Q_UNUSED(return_path); // We don't use return path currently + + // Go through all available connections and add them to the list + char **ids = conn_settings_list_ids(CONN_SETTINGS_CONNECTION); + if (ids == 0) { + // No ids found - nothing to do + return; + } + + for (int idx = 0; ids[idx]; idx++) { + all_iaps.append(QString(ids[idx])); + free(ids[idx]); + } + free(ids); +} + + +} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/iapconf.h b/src/3rdparty/libconninet/src/iapconf.h new file mode 100644 index 0000000..57c0856 --- /dev/null +++ b/src/3rdparty/libconninet/src/iapconf.h @@ -0,0 +1,84 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Aapo Makela <aapo.makela@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef IAPCONF_H +#define IAPCONF_H + +#include <QString> +#include <QVariant> + +namespace Maemo { + +class IAPConfPrivate; +class IAPConf { +public: + IAPConf(const QString &iap_id); + virtual ~IAPConf(); + + /** + Convenience method for setting multiple IAP values with one call. + */ + void set(const QString& key1, const QVariant& value1, + const QString& key2 = "", const QVariant& value2 = QVariant(), + const QString& key3 = "", const QVariant& value3 = QVariant(), + const QString& key4 = "", const QVariant& value4 = QVariant(), + const QString& key5 = "", const QVariant& value5 = QVariant(), + const QString& key6 = "", const QVariant& value6 = QVariant(), + const QString& key7 = "", const QVariant& value7 = QVariant(), + const QString& key8 = "", const QVariant& value8 = QVariant(), + const QString& key9 = "", const QVariant& value9 = QVariant(), + const QString& key10 = "", const QVariant& value10 = QVariant()); + + /** + Set one IAP value. + */ + void setValue(const QString& key, const QVariant& value); + + /** + Get one IAP value. + */ + QVariant value(const QString& key) const; + + /** + Clear this IAP from GConf + */ + void clear(const char *default_path=0); + + /** + Clear all IAP specific information from GConf (including all IAPs). + DO NOT USE THIS FUNCTION IN ANYWHERE ELSE EXCEPT IN TEST CODE! + */ + void clearAll(); + + /** + Return all the IAPs found in the system. If return_path is true, + then do not strip the IAP path away. + */ + static void getAll(QList<QString> &all_iaps, bool return_path=false); + +private: + IAPConfPrivate *d_ptr; +}; + +} // namespace Maemo + +#endif diff --git a/src/3rdparty/libconninet/src/iapmonitor.cpp b/src/3rdparty/libconninet/src/iapmonitor.cpp new file mode 100644 index 0000000..c44cbc8 --- /dev/null +++ b/src/3rdparty/libconninet/src/iapmonitor.cpp @@ -0,0 +1,110 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include <QStringList> + +#include <conn_settings.h> +#include "iapmonitor.h" + +namespace Maemo { + + +void conn_settings_notify_func (ConnSettingsType type, + const char *id, + const char *key, + ConnSettingsValue *value, + void *user_data); + +class IAPMonitorPrivate { +private: + IAPMonitor *monitor; + ConnSettings *settings; + +public: + + IAPMonitorPrivate(IAPMonitor *monitor) + : monitor(monitor) + { + settings = conn_settings_open(CONN_SETTINGS_CONNECTION, NULL); + conn_settings_add_notify( + settings, + (ConnSettingsNotifyFunc *)conn_settings_notify_func, + this); + } + + ~IAPMonitorPrivate() + { + conn_settings_del_notify(settings); + conn_settings_close(settings); + } + + void iapAdded(const QString &iap) + { + monitor->iapAdded(iap); + } + + void iapRemoved(const QString &iap) + { + monitor->iapRemoved(iap); + } +}; + +void conn_settings_notify_func (ConnSettingsType type, + const char *id, + const char *key, + ConnSettingsValue *value, + void *user_data) +{ + if (type != CONN_SETTINGS_CONNECTION) return; + IAPMonitorPrivate *priv = (IAPMonitorPrivate *)user_data; + + QString iapId(key); + iapId = iapId.split("/")[0]; + if (value != 0) { + priv->iapAdded(iapId); + } else if (iapId == QString(key)) { + // IAP is removed only when the directory gets removed + priv->iapRemoved(iapId); + } +} + +IAPMonitor::IAPMonitor() + : d_ptr(new IAPMonitorPrivate(this)) +{ +} + +IAPMonitor::~IAPMonitor() +{ + delete d_ptr; +} + +void IAPMonitor::iapAdded(const QString &id) +{ + // By default do nothing +} + +void IAPMonitor::iapRemoved(const QString &id) +{ + // By default do nothing +} + +} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/iapmonitor.h b/src/3rdparty/libconninet/src/iapmonitor.h new file mode 100644 index 0000000..558f23e --- /dev/null +++ b/src/3rdparty/libconninet/src/iapmonitor.h @@ -0,0 +1,48 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef IAPMONITOR_H +#define IAPMONITOR_H + +#include <QString> + +namespace Maemo { + +class IAPMonitorPrivate; +class IAPMonitor { +public: + IAPMonitor(); + ~IAPMonitor(); + +protected: + virtual void iapAdded(const QString &id); + virtual void iapRemoved(const QString &id); + +private: + IAPMonitorPrivate *d_ptr; + Q_DECLARE_PRIVATE(IAPMonitor); +}; + +} // namespace Maemo + +#endif // IAPMONITOR_H + diff --git a/src/3rdparty/libconninet/src/maemo_icd.cpp b/src/3rdparty/libconninet/src/maemo_icd.cpp new file mode 100644 index 0000000..bc84fbc --- /dev/null +++ b/src/3rdparty/libconninet/src/maemo_icd.cpp @@ -0,0 +1,1277 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include <stdio.h> +#include "maemo_icd.h" +#include <QObject> +#include <QTimer> +#include <QCoreApplication> +#include <QEventLoop> +#include <QDebug> +#include <dbus/dbus.h> +#include <dbus/dbus-glib-lowlevel.h> + + +namespace Maemo { + +/* Reference counting singleton class that creates a single connection + * to icd so that icd reference counting works as expected. This is + * needed because DBusDispatcher uses private dbus connections + * which come and go and icd cannot use that information to + * determine whether application quit or not. So we create one + * persistent connection that is only teared down when application + * quits or calls disconnect() + */ +class IcdRefCounting +{ +public: + IcdRefCounting() : first_call(true) { } + void setup(enum icd_connection_flags flag); + void cleanup(); + +private: + bool first_call; + struct DBusConnection *connection; +}; + +Q_GLOBAL_STATIC(IcdRefCounting, icdRefCounting); + + +void IcdRefCounting::setup(enum icd_connection_flags flag) +{ + if (first_call) { + DBusMessage *msg = NULL; + + connection = dbus_bus_get_private(DBUS_BUS_SYSTEM, NULL); + dbus_connection_set_exit_on_disconnect(connection, FALSE); + dbus_connection_setup_with_g_main(connection, NULL); + + msg = dbus_message_new_method_call(ICD_DBUS_API_INTERFACE, + ICD_DBUS_API_PATH, + ICD_DBUS_API_INTERFACE, + ICD_DBUS_API_CONNECT_REQ); + if (msg == NULL) + goto out; + + if (!dbus_message_append_args(msg, + DBUS_TYPE_UINT32, &flag, + DBUS_TYPE_INVALID)) + goto out; + + if (!dbus_connection_send_with_reply(connection, msg, + NULL, 60*1000)) + goto out; + + first_call = false; + return; + + out: + dbus_connection_close(connection); + dbus_connection_unref(connection); + } +} + +void IcdRefCounting::cleanup() +{ + if (!first_call) { + dbus_connection_close(connection); + dbus_connection_unref(connection); + first_call = true; + } +} + + +class IcdPrivate +{ +public: + IcdPrivate(Icd *myfriend) + { + init(10000, IcdNewDbusInterface, myfriend); + } + + IcdPrivate(unsigned int timeout, Icd *myfriend) + { + init(timeout, IcdNewDbusInterface, myfriend); + } + + IcdPrivate(unsigned int timeout, IcdDbusInterfaceVer ver, Icd *myfriend) + { + /* Note that the old Icd interface is currently disabled and + * the new one is always used. + */ + init(timeout, IcdNewDbusInterface, myfriend); + } + + ~IcdPrivate() + { + QObject::disconnect(mDBus, + SIGNAL(signalReceived(const QString&, + const QString&, + const QList<QVariant>&)), + icd, + SLOT(icdSignalReceived(const QString&, + const QString&, + const QList<QVariant>&))); + + QObject::disconnect(mDBus, + SIGNAL(callReply(const QString&, + const QList<QVariant>&, + const QString&)), + icd, + SLOT(icdCallReply(const QString&, + const QList<QVariant>&, + const QString&))); + + delete mDBus; + mDBus = 0; + } + + /* Icd2 dbus API functions */ + QStringList scan(icd_scan_request_flags flags, + QStringList &network_types, + QList<IcdScanResult>& scan_results, + QString& error); + void scanCancel(); + bool connect(icd_connection_flags flags, IcdConnectResult& result); + bool connect(icd_connection_flags flags, QList<ConnectParams>& params, + IcdConnectResult& result); + bool connect(icd_connection_flags flags, QString& iap, QString& result); + void select(uint flags); + void disconnect(uint connect_flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id); + void disconnect(uint connect_flags); + + uint state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult &state_result); + uint statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result); + uint addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result); + + uint state(QList<IcdStateResult>& state_results); + uint state_non_blocking(QList<IcdStateResult>& state_results); + uint statistics(QList<IcdStatisticsResult>& stats_results); + uint addrinfo(QList<IcdAddressInfoResult>& addr_results); + uint addrinfo_non_blocking(QList<IcdAddressInfoResult>& addr_results); + + void signalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args); + void callReply(const QString& method, + const QList<QVariant>& args, + const QString& error); + + QString error() { return mError; } + +public: + DBusDispatcher *mDBus; + QString mMethod; + QString mInterface; + QString mSignal; + QString mError; + QList<QVariant> mArgs; + QList<QVariant> receivedSignals; + unsigned int timeout; + IcdDbusInterfaceVer icd_dbus_version; + Icd *icd; + + void init(unsigned int dbus_timeout, IcdDbusInterfaceVer ver, + Icd *myfriend) + { + if (ver == IcdNewDbusInterface) { + mDBus = new DBusDispatcher(ICD_DBUS_API_INTERFACE, + ICD_DBUS_API_PATH, + ICD_DBUS_API_INTERFACE); + } else { + mDBus = new DBusDispatcher(ICD_DBUS_SERVICE, + ICD_DBUS_PATH, + ICD_DBUS_INTERFACE); + } + icd_dbus_version = ver; + + /* This connect has a side effect as it means that only one + * Icd object can exists in one time. This should be fixed! + */ + QObject::connect(mDBus, + SIGNAL(signalReceived(const QString&, + const QString&, + const QList<QVariant>&)), + myfriend, + SLOT(icdSignalReceived(const QString&, + const QString&, + const QList<QVariant>&))); + + QObject::connect(mDBus, + SIGNAL(callReply(const QString&, + const QList<QVariant>&, + const QString&)), + myfriend, + SLOT(icdCallReply(const QString&, + const QList<QVariant>&, + const QString&))); + + icd = myfriend; + timeout = dbus_timeout; + } + + void clearState() + { + mMethod.clear(); + mInterface.clear(); + mSignal.clear(); + mError.clear(); + mArgs.clear(); + receivedSignals.clear(); + } + + bool doConnect(IcdConnectResult& result); + bool doConnect(QString& result); + bool doState(); +}; + + +void IcdPrivate::signalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args) +{ + // Signal handler, which simply records what has been signalled + mInterface = interface; + mSignal = signal; + mArgs = args; + + //qDebug() << "signal" << signal << "received:" << args; + receivedSignals << QVariant(interface) << QVariant(signal) << QVariant(args); +} + + +void IcdPrivate::callReply(const QString& method, + const QList<QVariant>& /*args*/, + const QString& error) +{ + mMethod = method; + mError = error; +} + + +static void get_scan_result(QList<QVariant>& args, + IcdScanResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.status = args[i++].toUInt(); + ret.timestamp = args[i++].toUInt(); + ret.scan.service_type = args[i++].toString(); + ret.service_name = args[i++].toString(); + ret.scan.service_attrs = args[i++].toUInt(); + ret.scan.service_id = args[i++].toString(); + ret.service_priority = args[i++].toInt(); + ret.scan.network_type = args[i++].toString(); + ret.network_name = args[i++].toString(); + ret.scan.network_attrs = args[i++].toUInt(); + ret.scan.network_id = args[i++].toByteArray(); + ret.network_priority = args[i++].toInt(); + ret.signal_strength = args[i++].toInt(); + ret.station_id = args[i++].toString(); + ret.signal_dB = args[i++].toInt(); +} + + +static void get_connect_result(QList<QVariant>& args, + IcdConnectResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.connect.service_type = args[i++].toString(); + ret.connect.service_attrs = args[i++].toInt(); + ret.connect.service_id = args[i++].toString(); + ret.connect.network_type = args[i++].toString(); + ret.connect.network_attrs = args[i++].toInt(); + ret.connect.network_id = args[i++].toByteArray(); + ret.status = args[i++].toInt(); +} + + +QStringList IcdPrivate::scan(icd_scan_request_flags flags, + QStringList &network_types, + QList<IcdScanResult>& scan_results, + QString& error) +{ + QStringList scanned_types; + QTimer timer; + QVariant reply; + QVariantList vl; + bool last_result = false; + IcdScanResult result; + int all_waited; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_SCAN_REQ, (uint)flags); + if (reply.type() != QVariant::List) + return scanned_types; + vl = reply.toList(); + if (vl.isEmpty()) { + error = "Scan did not return anything."; + return scanned_types; + } + reply = vl.first(); + scanned_types = reply.toStringList(); + //qDebug() << "Scanning:" << scanned_types; + all_waited = scanned_types.size(); + + timer.setSingleShot(true); + timer.start(timeout); + + scan_results.clear(); + while (!last_result) { + while (timer.isActive() && mInterface.isEmpty() && mError.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + //qDebug() << "Timeout happened"; + break; + } + + if (mSignal != ICD_DBUS_API_SCAN_SIG) { + //qDebug() << "Received" << mSignal << "while waiting" << ICD_DBUS_API_SCAN_SIG << ", ignoring"; + mInterface.clear(); + continue; + } + + if (mError.isEmpty()) { + QString msgInterface = receivedSignals.takeFirst().toString(); + QString msgSignal = receivedSignals.takeFirst().toString(); + QList<QVariant> msgArgs = receivedSignals.takeFirst().toList(); + //qDebug() << "Signal" << msgSignal << "received."; + //qDebug() << "Params:" << msgArgs; + + while (!msgSignal.isEmpty()) { + get_scan_result(msgArgs, result); + +#if 0 + qDebug() << "Received: " << + "status =" << result.status << + ", timestamp =" << result.timestamp << + ", service_type =" << result.scan.service_type << + ", service_name =" << result.service_name << + ", service_attrs =" << result.scan.service_attrs << + ", service_id =" << result.scan.service_id << + ", service_priority =" << result.service_priority << + ", network_type =" << result.scan.network_type << + ", network_name =" << result.network_name << + ", network_attrs =" << result.scan.network_attrs << + ", network_id =" << "-" << + ", network_priority =" << result.network_priority << + ", signal_strength =" << result.signal_strength << + ", station_id =" << result.station_id << + ", signal_dB =" << result.signal_dB; +#endif + + if (result.status == ICD_SCAN_COMPLETE) { + //qDebug() << "waited =" << all_waited; + if (--all_waited == 0) { + last_result = true; + break; + } + } else + scan_results << result; + + if (receivedSignals.isEmpty()) + break; + + msgInterface = receivedSignals.takeFirst().toString(); + msgSignal = receivedSignals.takeFirst().toString(); + msgArgs = receivedSignals.takeFirst().toList(); + } + mInterface.clear(); + + } else { + qWarning() << "Error while scanning:" << mError; + break; + } + } + timer.stop(); + + error = mError; + return scanned_types; +} + + +void IcdPrivate::scanCancel() +{ + mDBus->call(ICD_DBUS_API_SCAN_CANCEL); +} + + +bool IcdPrivate::doConnect(IcdConnectResult& result) +{ + QTimer timer; + bool status = false; + + timer.setSingleShot(true); + timer.start(timeout); + + //qDebug() << "Waiting" << ICD_DBUS_API_CONNECT_SIG << "signal"; + + while (timer.isActive() && mInterface.isEmpty() && + mSignal != ICD_DBUS_API_CONNECT_SIG && + mError.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + timer.stop(); + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + get_connect_result(mArgs, result); + status = true; + } else + status = false; + } else + status = false; + + return status; +} + + +bool IcdPrivate::connect(icd_connection_flags flags, IcdConnectResult& result) +{ + clearState(); + //mDBus->callAsynchronous(ICD_DBUS_API_CONNECT_REQ, (uint)flags); + mDBus->call(ICD_DBUS_API_CONNECT_REQ, (uint)flags); + icdRefCounting()->setup(flags); + return doConnect(result); +} + + +bool IcdPrivate::connect(icd_connection_flags flags, QList<ConnectParams>& params, + IcdConnectResult& result) +{ + QVariantList varlist; + QVariantList varlist2; + + foreach (ConnectParams param, params) { + QVariantList items; + + items.append(QVariant(param.connect.service_type)); + items.append(QVariant(param.connect.service_attrs)); + items.append(QVariant(param.connect.service_id)); + items.append(QVariant(param.connect.network_type)); + items.append(QVariant(param.connect.network_attrs)); + items.append(QVariant(param.connect.network_id)); + + varlist.append(items); + } + + varlist2.append(QVariant(varlist)); + + clearState(); + //mDBus->callAsynchronous(ICD_DBUS_API_CONNECT_REQ, (uint)flags, varlist2); + mDBus->call(ICD_DBUS_API_CONNECT_REQ, (uint)flags, varlist2); + icdRefCounting()->setup(flags); + return doConnect(result); +} + + +bool IcdPrivate::doConnect(QString& ret) +{ + QTimer timer; + bool status = false; + + timer.setSingleShot(true); + timer.start(timeout); + + while (timer.isActive() && mInterface.isEmpty() && + mError.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + timer.stop(); + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + status = true; + //ret = mArgs[0]; // TODO correctly + } else + status = false; + } else + status = false; + + return status; +} + + +bool IcdPrivate::connect(icd_connection_flags flags, QString& iap, QString& result) +{ + clearState(); + //mDBus->callAsynchronous(ICD_CONNECT_REQ, iap, (uint)flags); + mDBus->call(ICD_CONNECT_REQ, iap, (uint)flags); + icdRefCounting()->setup(flags); + return doConnect(result); +} + + +void IcdPrivate::select(uint flags) +{ + mDBus->call(ICD_DBUS_API_SELECT_REQ, flags); +} + + +void IcdPrivate::disconnect(uint flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id) +{ + clearState(); + mDBus->call(ICD_DBUS_API_DISCONNECT_REQ, flags, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + icdRefCounting()->cleanup(); +} + + +void IcdPrivate::disconnect(uint flags) +{ + clearState(); + mDBus->call(ICD_DBUS_API_DISCONNECT_REQ, flags); + icdRefCounting()->cleanup(); +} + + +static void get_state_all_result(QList<QVariant>& args, + IcdStateResult& ret) +{ + int i=0; + + ret.params.service_type = args[i++].toString(); + ret.params.service_attrs = args[i++].toUInt(); + ret.params.service_id = args[i++].toString(); + ret.params.network_type = args[i++].toString(); + ret.params.network_attrs = args[i++].toUInt(); + ret.params.network_id = args[i++].toByteArray(); + ret.error = args[i++].toString(); + ret.state = args[i++].toInt(); +} + + +static void get_state_all_result2(QList<QVariant>& args, + IcdStateResult& ret) +{ + int i=0; + + ret.params.network_type = args[i++].toString(); + ret.state = args[i++].toInt(); + + // Initialize the other values so that the caller can + // notice we only returned partial status + ret.params.service_type = QString(); + ret.params.service_attrs = 0; + ret.params.service_id = QString(); + ret.params.network_attrs = 0; + ret.params.network_id = QByteArray(); + ret.error = QString(); +} + + +uint IcdPrivate::state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult& state_result) +{ + QTimer timer; + QVariant reply; + uint total_signals; + QVariantList vl; + + clearState(); + + reply = mDBus->call(ICD_DBUS_API_STATE_REQ, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + total_signals = reply.toUInt(); + if (!total_signals) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + if (mSignal != ICD_DBUS_API_STATE_SIG) { + mInterface.clear(); + continue; + } + } + + timer.stop(); + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + if (mArgs.size()>2) + get_state_all_result(mArgs, state_result); + else { + // We are not connected as we did not get the status we asked + return 0; + } + } + } else { + qWarning() << "Error:" << mError; + } + + // The returned value should be one because we asked for one state + return total_signals; +} + + +uint IcdPrivate::state_non_blocking(QList<IcdStateResult>& state_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdStateResult result; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_STATE_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + state_results.clear(); + mError.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_STATE_SIG) { + continue; + } + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + if (mArgs.size()==2) + get_state_all_result2(mArgs, result); + else + get_state_all_result(mArgs, result); + state_results << result; + } + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + + return total_signals; +} + + +/* Special version of the state() call which does not call event loop. + * Needed in order to fix NB#175098 where Qt4.7 webkit crashes because event + * loop is run when webkit does not expect it. This function is called from + * bearer management API syncStateWithInterface() in QNetworkSession + * constructor. + */ +uint IcdPrivate::state(QList<IcdStateResult>& state_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdStateResult result; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_STATE_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + state_results.clear(); + mError.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + mDBus->synchronousDispatch(1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_STATE_SIG) { + continue; + } + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + if (mArgs.size()==2) + get_state_all_result2(mArgs, result); + else + get_state_all_result(mArgs, result); + state_results << result; + } + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + + return total_signals; +} + + +static void get_statistics_all_result(QList<QVariant>& args, + IcdStatisticsResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.params.service_type = args[i++].toString(); + ret.params.service_attrs = args[i++].toUInt(); + ret.params.service_id = args[i++].toString(); + ret.params.network_type = args[i++].toString(); + ret.params.network_attrs = args[i++].toUInt(); + ret.params.network_id = args[i++].toByteArray(); + ret.time_active = args[i++].toUInt(); + ret.signal_strength = (enum icd_nw_levels)args[i++].toUInt(); + ret.bytes_sent = args[i++].toUInt(); + ret.bytes_received = args[i++].toUInt(); +} + + +uint IcdPrivate::statistics(QList<IcdStatisticsResult>& stats_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdStatisticsResult result; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_STATISTICS_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + if (reply.type() != QVariant::UInt) + return 0; + signals_left = total_signals = reply.toUInt(); + + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + stats_results.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_STATISTICS_SIG) { + continue; + } + + if (mError.isEmpty()) { + get_statistics_all_result(mArgs, result); + stats_results << result; + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + + return total_signals; +} + + +uint IcdPrivate::statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result) +{ + QTimer timer; + QVariant reply; + uint total_signals; + QVariantList vl; + + clearState(); + + reply = mDBus->call(ICD_DBUS_API_STATISTICS_REQ, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + total_signals = reply.toUInt(); + if (!total_signals) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + if (mSignal != ICD_DBUS_API_STATISTICS_SIG) { + mInterface.clear(); + continue; + } + } + + timer.stop(); + + if (mError.isEmpty()) { + get_statistics_all_result(mArgs, stats_result); + } else { + qWarning() << "Error:" << mError; + } + + // The returned value should be one because we asked for one statistics + return total_signals; +} + + +static void get_addrinfo_all_result(QList<QVariant>& args, + IcdAddressInfoResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.params.service_type = args[i++].toString(); + ret.params.service_attrs = args[i++].toUInt(); + ret.params.service_id = args[i++].toString(); + ret.params.network_type = args[i++].toString(); + ret.params.network_attrs = args[i++].toUInt(); + ret.params.network_id = args[i++].toByteArray(); + + QVariantList vl = args[i].toList(); + QVariant reply = vl.first(); + QList<QVariant> lst = reply.toList(); + for (int k=0; k<lst.size()/6; k=k+6) { + IcdIPInformation ip_info; + ip_info.address = lst[k].toString(); + ip_info.netmask = lst[k++].toString(); + ip_info.default_gateway = lst[k++].toString(); + ip_info.dns1 = lst[k++].toString(); + ip_info.dns2 = lst[k++].toString(); + ip_info.dns3 = lst[k++].toString(); + + ret.ip_info << ip_info; + } +} + + +/* Special version of the addrinfo() call which does not call event loop. + * Needed in order to fix NB#175098 where Qt4.7 webkit crashes because event + * loop is run when webkit does not expect it. This function is called from + * bearer management API syncStateWithInterface() in QNetworkSession + * constructor. + */ +uint IcdPrivate::addrinfo(QList<IcdAddressInfoResult>& addr_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdAddressInfoResult result; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + if (reply.type() != QVariant::UInt) + return 0; + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + addr_results.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + mDBus->synchronousDispatch(1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { + continue; + } + + if (mError.isEmpty()) { + get_addrinfo_all_result(mArgs, result); + addr_results << result; + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + return total_signals; +} + +uint IcdPrivate::addrinfo_non_blocking(QList<IcdAddressInfoResult>& addr_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdAddressInfoResult result; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + if (reply.type() != QVariant::UInt) + return 0; + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + addr_results.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { + continue; + } + + if (mError.isEmpty()) { + get_addrinfo_all_result(mArgs, result); + addr_results << result; + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + return total_signals; +} + + +uint IcdPrivate::addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result) +{ + QTimer timer; + QVariant reply; + uint total_signals; + QVariantList vl; + + clearState(); + + reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + total_signals = reply.toUInt(); + + if (!total_signals) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { + mInterface.clear(); + continue; + } + } + + timer.stop(); + + if (mError.isEmpty()) { + get_addrinfo_all_result(mArgs, addr_result); + } else { + qWarning() << "Error:" << mError; + } + + // The returned value should be one because we asked for one addrinfo + return total_signals; +} + + +Icd::Icd(QObject *parent) + : QObject(parent), d(new IcdPrivate(this)) +{ +} + +Icd::Icd(unsigned int timeout, QObject *parent) + : QObject(parent), d(new IcdPrivate(timeout, this)) +{ +} + +Icd::Icd(unsigned int timeout, IcdDbusInterfaceVer ver, QObject *parent) + : QObject(parent), d(new IcdPrivate(timeout, ver, this)) +{ +} + +Icd::~Icd() +{ + delete d; +} + + +QStringList Icd::scan(icd_scan_request_flags flags, + QStringList &network_types, + QList<IcdScanResult>& scan_results, + QString& error) +{ + return d->scan(flags, network_types, scan_results, error); +} + + +void Icd::scanCancel() +{ + d->scanCancel(); +} + + +bool Icd::connect(icd_connection_flags flags, IcdConnectResult& result) +{ + return d->connect(flags, result); +} + + +bool Icd::connect(icd_connection_flags flags, QList<ConnectParams>& params, + IcdConnectResult& result) +{ + return d->connect(flags, params, result); +} + + +bool Icd::connect(icd_connection_flags flags, QString& iap, QString& result) +{ + return d->connect(flags, iap, result); +} + + +void Icd::select(uint flags) +{ + d->select(flags); +} + + +void Icd::disconnect(uint connect_flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id) +{ + d->disconnect(connect_flags, service_type, + service_attrs, service_id, + network_type, network_attrs, + network_id); +} + + +void Icd::disconnect(uint connect_flags) +{ + d->disconnect(connect_flags); +} + + +uint Icd::state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult &state_result) +{ + return d->state(service_type, service_attrs, service_id, + network_type, network_attrs, network_id, + state_result); +} + + +uint Icd::statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result) +{ + return d->statistics(service_type, service_attrs, service_id, + network_type, network_attrs, network_id, + stats_result); +} + + +uint Icd::addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result) +{ + return d->addrinfo(service_type, service_attrs, service_id, + network_type, network_attrs, network_id, + addr_result); +} + + +uint Icd::state(QList<IcdStateResult>& state_results) +{ + return d->state(state_results); +} + +uint Icd::state_non_blocking(QList<IcdStateResult>& state_results) +{ + return d->state_non_blocking(state_results); +} + +uint Icd::statistics(QList<IcdStatisticsResult>& stats_results) +{ + return d->statistics(stats_results); +} + + +uint Icd::addrinfo(QList<IcdAddressInfoResult>& addr_results) +{ + return d->addrinfo(addr_results); +} + +uint Icd::addrinfo_non_blocking(QList<IcdAddressInfoResult>& addr_results) +{ + return d->addrinfo_non_blocking(addr_results); +} + +void Icd::icdSignalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args) +{ + d->signalReceived(interface, signal, args); +} + + +void Icd::icdCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error) +{ + d->callReply(method, args, error); +} + + +QString Icd::error() +{ + return d->error(); +} + +} // Maemo namespace + + diff --git a/src/3rdparty/libconninet/src/maemo_icd.h b/src/3rdparty/libconninet/src/maemo_icd.h new file mode 100644 index 0000000..d7a8d5b --- /dev/null +++ b/src/3rdparty/libconninet/src/maemo_icd.h @@ -0,0 +1,182 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef MAEMO_ICD_H +#define MAEMO_ICD_H + +#include <QObject> +#include <QStringList> +#include <QByteArray> +#include <QMetaType> +#include <QtDBus> +#include <QDBusArgument> + +#include <glib.h> +#include <icd/dbus_api.h> +#include <icd/osso-ic.h> +#include <icd/osso-ic-dbus.h> + +#include "dbusdispatcher.h" +#include <icd/network_api_defines.h> + +#define ICD_LONG_SCAN_TIMEOUT (30*1000) /* 30sec */ +#define ICD_SHORT_SCAN_TIMEOUT (10*1000) /* 10sec */ +#define ICD_SHORT_CONNECT_TIMEOUT (10*1000) /* 10sec */ +#define ICD_LONG_CONNECT_TIMEOUT (150*1000) /* 2.5min */ + +namespace Maemo { + +struct CommonParams { + QString service_type; + uint service_attrs; + QString service_id; + QString network_type; + uint network_attrs; + QByteArray network_id; +}; + +struct ConnectParams { + struct CommonParams connect; +}; + +struct IcdScanResult { + uint status; // see #icd_scan_status + uint timestamp; // when last seen + QString service_name; + uint service_priority; // within a service type + QString network_name; + uint network_priority; + struct CommonParams scan; + uint signal_strength; // quality, 0 (none) - 10 (good) + QString station_id; // e.g. MAC address or similar id + uint signal_dB; // use signal strength above unless you know what you are doing + + IcdScanResult() { + status = timestamp = scan.service_attrs = service_priority = + scan.network_attrs = network_priority = signal_strength = + signal_dB = 0; + } +}; + +struct IcdConnectResult { + struct CommonParams connect; + uint status; +}; + +struct IcdStateResult { + struct CommonParams params; + QString error; + uint state; +}; + +struct IcdStatisticsResult { + struct CommonParams params; + uint time_active; // in seconds + enum icd_nw_levels signal_strength; // see network_api_defines.h in icd2-dev package + uint bytes_sent; + uint bytes_received; +}; + +struct IcdIPInformation { + QString address; + QString netmask; + QString default_gateway; + QString dns1; + QString dns2; + QString dns3; +}; + +struct IcdAddressInfoResult { + struct CommonParams params; + QList<IcdIPInformation> ip_info; +}; + +enum IcdDbusInterfaceVer { + IcdOldDbusInterface = 0, // use the old OSSO-IC interface + IcdNewDbusInterface // use the new Icd2 interface (default) +}; + + +class IcdPrivate; +class Icd : public QObject +{ + Q_OBJECT + +public: + Icd(QObject *parent = 0); + Icd(unsigned int timeout, QObject *parent = 0); + Icd(unsigned int timeout, IcdDbusInterfaceVer ver, QObject *parent = 0); + ~Icd(); + QString error(); // returns last error string + + /* Icd2 dbus API functions */ + QStringList scan(icd_scan_request_flags flags, + QStringList &network_types, + QList<IcdScanResult>& scan_results, + QString& error); + void scanCancel(); + bool connect(icd_connection_flags flags, IcdConnectResult& result); + bool connect(icd_connection_flags flags, QList<ConnectParams>& params, + IcdConnectResult& result); + bool connect(icd_connection_flags flags, QString& iap, QString& result); + void select(uint flags); + void disconnect(uint connect_flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id); + void disconnect(uint connect_flags); + + uint state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult &state_result); + uint statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result); + uint addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result); + + uint state(QList<IcdStateResult>& state_results); + uint state_non_blocking(QList<IcdStateResult>& state_results); + uint statistics(QList<IcdStatisticsResult>& stats_results); + uint addrinfo(QList<IcdAddressInfoResult>& addr_results); + uint addrinfo_non_blocking(QList<IcdAddressInfoResult>& addr_results); + +private Q_SLOTS: + void icdSignalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args); + void icdCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error); + +private: + IcdPrivate *d; + friend class IcdPrivate; +}; + +} // Maemo namespace + +#endif diff --git a/src/3rdparty/libconninet/src/proxyconf.cpp b/src/3rdparty/libconninet/src/proxyconf.cpp new file mode 100644 index 0000000..5b27565 --- /dev/null +++ b/src/3rdparty/libconninet/src/proxyconf.cpp @@ -0,0 +1,315 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include <QDebug> +#include <QWriteLocker> +#include <QNetworkProxyFactory> +#include <QNetworkProxy> +#include <GConfItem> +#include <gconf/gconf-client.h> +#include "proxyconf.h" + +#define CONF_PROXY "/system/proxy" +#define HTTP_PROXY "/system/http_proxy" + + +namespace Maemo { + +class NetworkProxyFactory : QNetworkProxyFactory { +public: + NetworkProxyFactory() { } + QList<QNetworkProxy> queryProxy(const QNetworkProxyQuery &query = QNetworkProxyQuery()); +}; + + +QList<QNetworkProxy> NetworkProxyFactory::queryProxy(const QNetworkProxyQuery &query) +{ + ProxyConf proxy_conf; + + QList<QNetworkProxy> result = proxy_conf.flush(query); + if (result.isEmpty()) + result << QNetworkProxy::NoProxy; + + return result; +} + + +class ProxyConfPrivate { +private: + // proxy values from gconf + QString mode; + bool use_http_host; + QString autoconfig_url; + QString http_proxy; + quint16 http_port; + QList<QVariant> ignore_hosts; + QString secure_host; + quint16 secure_port; + QString ftp_host; + quint16 ftp_port; + QString socks_host; + quint16 socks_port; + QString rtsp_host; + quint16 rtsp_port; + + QVariant getValue(QString& name); + QVariant getHttpValue(QString& name); + QVariant getValue(const char *name); + QVariant getHttpValue(const char *name); + bool isHostExcluded(const QString &host); + +public: + QString prefix; + QString http_prefix; + + void readProxyData(); + QList<QNetworkProxy> flush(const QNetworkProxyQuery &query); +}; + + +QVariant ProxyConfPrivate::getValue(QString& name) +{ + GConfItem item(prefix + name); + return item.value(); +} + +QVariant ProxyConfPrivate::getHttpValue(QString& name) +{ + GConfItem item(http_prefix + name); + return item.value(); +} + + +QVariant ProxyConfPrivate::getValue(const char *name) +{ + QString n = QString(name); + return getValue(n); +} + +QVariant ProxyConfPrivate::getHttpValue(const char *name) +{ + QString n = QString(name); + return getHttpValue(n); +} + + +#define GET(var, type) \ + do { \ + var = getValue(#var).to##type (); \ + /*qDebug()<<"var="<<var;*/ \ + } while(0) + +#define GET2(var, name, type) \ + do { \ + var = getHttpValue(#name).to##type (); \ + /*qDebug()<<"var="<<var;*/ \ + } while(0) + + +void ProxyConfPrivate::readProxyData() +{ + /* Read the proxy settings from /system/proxy* */ + GET2(http_proxy, host, String); + GET2(http_port, port, Int); + GET2(ignore_hosts, ignore_hosts, List); + + GET(mode, String); + GET(autoconfig_url, String); + GET(secure_host, String); + GET(secure_port, Int); + GET(ftp_host, String); + GET(ftp_port, Int); + GET(socks_host, String); + GET(socks_port, Int); + GET(rtsp_host, String); + GET(rtsp_port, Int); + + if (http_proxy.isEmpty()) + use_http_host = false; + else + use_http_host = true; +} + + +bool ProxyConfPrivate::isHostExcluded(const QString &host) +{ + if (host.isEmpty()) + return true; + + if (ignore_hosts.isEmpty()) + return false; + + QHostAddress ipAddress; + bool isIpAddress = ipAddress.setAddress(host); + + foreach (QVariant h, ignore_hosts) { + QString entry = h.toString(); + if (isIpAddress && ipAddress.isInSubnet(QHostAddress::parseSubnet(entry))) { + return true; // excluded + } else { + // do wildcard matching + QRegExp rx(entry, Qt::CaseInsensitive, QRegExp::Wildcard); + if (rx.exactMatch(host)) + return true; + } + } + + // host was not excluded + return false; +} + + +QList<QNetworkProxy> ProxyConfPrivate::flush(const QNetworkProxyQuery &query) +{ + QList<QNetworkProxy> result; + +#if 0 + qDebug()<<"http_proxy" << http_proxy; + qDebug()<<"http_port" << http_port; + qDebug()<<"ignore_hosts" << ignore_hosts; + qDebug()<<"use_http_host" << use_http_host; + qDebug()<<"mode" << mode; + qDebug()<<"autoconfig_url" << autoconfig_url; + qDebug()<<"secure_host" << secure_host; + qDebug()<<"secure_port" << secure_port; + qDebug()<<"ftp_host" << ftp_host; + qDebug()<<"ftp_port" << ftp_port; + qDebug()<<"socks_host" << socks_host; + qDebug()<<"socks_port" << socks_port; + qDebug()<<"rtsp_host" << rtsp_host; + qDebug()<<"rtsp_port" << rtsp_port; +#endif + + if (isHostExcluded(query.peerHostName())) + return result; // no proxy for this host + + if (mode == "auto") { + // TODO: pac currently not supported, fix me + return result; + } + + if (mode == "manual") { + bool isHttps = false; + QString protocol = query.protocolTag().toLower(); + + // try the protocol-specific proxy + QNetworkProxy protocolSpecificProxy; + + if (protocol == QLatin1String("ftp")) { + if (!ftp_host.isEmpty()) { + protocolSpecificProxy.setType(QNetworkProxy::FtpCachingProxy); + protocolSpecificProxy.setHostName(ftp_host); + protocolSpecificProxy.setPort(ftp_port); + } + } else if (protocol == QLatin1String("http")) { + if (!http_proxy.isEmpty()) { + protocolSpecificProxy.setType(QNetworkProxy::HttpProxy); + protocolSpecificProxy.setHostName(http_proxy); + protocolSpecificProxy.setPort(http_port); + } + } else if (protocol == QLatin1String("https")) { + isHttps = true; + if (!secure_host.isEmpty()) { + protocolSpecificProxy.setType(QNetworkProxy::HttpProxy); + protocolSpecificProxy.setHostName(secure_host); + protocolSpecificProxy.setPort(secure_port); + } + } + + if (protocolSpecificProxy.type() != QNetworkProxy::DefaultProxy) + result << protocolSpecificProxy; + + + if (!socks_host.isEmpty()) { + QNetworkProxy proxy; + proxy.setType(QNetworkProxy::Socks5Proxy); + proxy.setHostName(socks_host); + proxy.setPort(socks_port); + result << proxy; + } + + + // Add the HTTPS proxy if present (and if we haven't added yet) + if (!isHttps) { + QNetworkProxy https; + if (!secure_host.isEmpty()) { + https.setType(QNetworkProxy::HttpProxy); + https.setHostName(secure_host); + https.setPort(secure_port); + } + + if (https.type() != QNetworkProxy::DefaultProxy && + https != protocolSpecificProxy) + result << https; + } + } + + return result; +} + + +ProxyConf::ProxyConf() + : d_ptr(new ProxyConfPrivate) +{ + g_type_init(); + d_ptr->prefix = CONF_PROXY "/"; + d_ptr->http_prefix = HTTP_PROXY "/"; +} + +ProxyConf::~ProxyConf() +{ + delete d_ptr; +} + + +QList<QNetworkProxy> ProxyConf::flush(const QNetworkProxyQuery &query) +{ + d_ptr->readProxyData(); + return d_ptr->flush(query); +} + + +static int refcount = 0; +static QReadWriteLock lock; + +void ProxyConf::update() +{ + QWriteLocker locker(&lock); + NetworkProxyFactory *factory = new NetworkProxyFactory(); + QNetworkProxyFactory::setApplicationProxyFactory((QNetworkProxyFactory*)factory); + refcount++; +} + + +void ProxyConf::clear(void) +{ + QWriteLocker locker(&lock); + refcount--; + if (refcount == 0) + QNetworkProxyFactory::setApplicationProxyFactory(NULL); + + if (refcount<0) + refcount = 0; +} + + +} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/proxyconf.h b/src/3rdparty/libconninet/src/proxyconf.h new file mode 100644 index 0000000..7711c49 --- /dev/null +++ b/src/3rdparty/libconninet/src/proxyconf.h @@ -0,0 +1,53 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef PROXYCONF_H +#define PROXYCONF_H + +#include <QString> +#include <QNetworkProxy> + +namespace Maemo { + +class ProxyConfPrivate; +class ProxyConf { +private: + ProxyConfPrivate *d_ptr; + +public: + ProxyConf(); + virtual ~ProxyConf(); + + QList<QNetworkProxy> flush(const QNetworkProxyQuery &query = QNetworkProxyQuery()); // read the proxies from db + + /* Note that for each update() call there should be corresponding + * clear() call because the ProxyConf class implements a reference + * counting mechanism. The factory is removed only when there is + * no one using the factory any more. + */ + static void update(void); // this builds QNetworkProxy factory + static void clear(void); // this removes QNetworkProxy factory +}; + +} // namespace Maemo + +#endif diff --git a/src/3rdparty/libconninet/tests/Makefile.am b/src/3rdparty/libconninet/tests/Makefile.am new file mode 100644 index 0000000..f6f41ea --- /dev/null +++ b/src/3rdparty/libconninet/tests/Makefile.am @@ -0,0 +1,39 @@ +DEFS = -DDBUS_API_SUBJECT_TO_CHANGE +INCLUDES = @GLIB_CFLAGS@ @DBUS_CFLAGS@ @CONNSETTINGS_CFLAGS@ @OSSO_IC_CFLAGS@ @ICD_DEV_CFLAGS@ \ + @QTCORE_CFLAGS@ @QTDBUS_CFLAGS@ @QTCORE_CFLAGS@ @QTNETWORK_CFLAGS@ @QTTEST_CFLAGS@ \ + -I$(top_srcdir) \ + -I$(top_srcdir)/src + +LIBS = @GLIB_LIBS@ @DBUS_LIBS@ @CONNSETTINGS_LIBS@ @OSSO_IC_LIBS@ @ICD_DEV_LIBS@ \ + @QTCORE_LIBS@ @QTDBUS_LIBS@ @QTCORE_LIBS@ @QTNETWORK_LIBS@ @QTTEST_LIBS@ \ + $(top_builddir)/src/libconninet.la + +AM_CFLAGS = $(CONCFLAGS) +AM_LDFLAGS = -static + +bin_PROGRAMS = test_dbusdispatcher test_iapconf test_maemo_icd test_iapmonitor test_proxyconf + +test_dbusdispatcher_SOURCES = ut_dbusdispatcher.cpp +ut_dbusdispatcher.o: ut_dbusdispatcher.moc + +test_iapconf_SOURCES = ut_iapconf.cpp +ut_iapconf.o: ut_iapconf.moc + +test_maemo_icd_SOURCES = ut_maemo_icd.cpp +ut_maemo_icd.o: ut_maemo_icd.moc + +test_iapmonitor_SOURCES = ut_iapmonitor.cpp +ut_iapmonitor.o: ut_iapmonitor.moc + +test_proxyconf_SOURCES = ut_proxyconf.cpp +ut_proxyconf.o: ut_proxyconf.moc + + +MAINTAINERCLEANFILES = Makefile.in + +# This rule lets GNU make create any *.moc from the equivalent *.cpp +%.moc: %.cpp + moc $< -o $@ + +# This line ensures that generated moc files are deleted when we make clean. +CLEANFILES = *.moc diff --git a/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp b/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp new file mode 100644 index 0000000..70deb3f --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp @@ -0,0 +1,191 @@ +/* * This file is part of conn-dui-settings-inet * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Aapo Makela <aapo.makela@nokia.com> + * + * This software, including documentation, is protected by copyright + * controlled by Nokia Corporation. All rights are reserved. Copying, + * including reproducing, storing, adapting or translating, any or all of + * this material requires the prior written consent of Nokia Corporation. + * This material also contains confidential information which may not be + * disclosed to others without the prior written consent of Nokia. + */ + +#include <QtTest/QtTest> +#include <QCoreApplication> +#include <QEventLoop> +#include <QDebug> +#include <icd/dbus_api.h> + +#include <dbusdispatcher.h> + +class Ut_DBusDispatcher : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void simpleSignalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args); + void simpleCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error); + void simpleCall(); + + void complexCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error); + void complexCall(); + +private: + Maemo::DBusDispatcher *mSubject; + QProcess *icd_stub; + + QString mMethod; + QString mInterface; + QString mSignal; + QList<QVariant> mArgs; +}; + +void Ut_DBusDispatcher::init() +{ + mSubject = new Maemo::DBusDispatcher("com.nokia.icd2", "/com/nokia/icd2", + "com.nokia.icd2"); + + // Start icd2 stub + icd_stub = new QProcess(this); + icd_stub->start("/usr/bin/icd2_stub.py"); + QTest::qWait(1000); +} + +void Ut_DBusDispatcher::cleanup() +{ + // Terminate icd2 stub + icd_stub->terminate(); + icd_stub->waitForFinished(); + + delete mSubject; + mSubject = 0; +} + +void Ut_DBusDispatcher::initTestCase() +{ +} + +void Ut_DBusDispatcher::cleanupTestCase() +{ +} + +void Ut_DBusDispatcher::simpleSignalReceived(const QString& interface, + const QString& signal, + const QList<QVariant>& args) +{ + // Signal handler, which simply records what has been signalled + mInterface = interface; + mSignal = signal; + mArgs = args; +} + +void Ut_DBusDispatcher::simpleCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error) +{ + mMethod = method; + + // Check that method matches and at least WLAN_INFRA is returned + QVERIFY(error.isEmpty()); + QVERIFY(args[0].toStringList().contains("WLAN_INFRA")); +} + +void Ut_DBusDispatcher::simpleCall() +{ + uint flags = 0; + QList<QVariant> reply; + int idx = 0; + QTimer timer; + + // Connect signals + connect(mSubject, SIGNAL(signalReceived(const QString&, + const QString&, + const QList<QVariant>&)), + this, SLOT(simpleSignalReceived(const QString&, + const QString&, + const QList<QVariant>&))); + connect(mSubject, SIGNAL(callReply(const QString&, + const QList<QVariant>&, + const QString&)), + this, SLOT(simpleCallReply(const QString&, + const QList<QVariant>&, + const QString&))); + + // Request scan and verify the call starts succesfully + QVERIFY(mSubject->callAsynchronous("scan_req", flags)); + + // Wait 1st scan signal for 10 secs + timer.setSingleShot(true); + timer.start(10000); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + idx++; + } + timer.stop(); + + // Sanity checks for the scan result + QVERIFY(mInterface == "com.nokia.icd2"); // interface is icd2 + QVERIFY(mMethod == "scan_req"); // method is scan_req + QVERIFY(mSignal == "scan_result_sig"); // signal is scan result + QVERIFY(mArgs[0] == QVariant(0) || + mArgs[0] == QVariant(4)); // First argument is status + // (0 == NEW, 4 == COMPLETED) + //QVERIFY(mArgs.contains(QVariant("WLAN_INFRA"))); // WLAN scan result +} + +void Ut_DBusDispatcher::complexCallReply(const QString& method, + const QList<QVariant>& args, + const QString& error) +{ + mMethod = method; + + // Check that method has not return arguments and error is not set + QVERIFY(error.isEmpty()); + QVERIFY(args.isEmpty()); +} + +void Ut_DBusDispatcher::complexCall() +{ + uint flags = ICD_CONNECTION_FLAG_UI_EVENT; + QList<QVariant> reply; + QVariantList networks; + QVariantList network1; + + network1 << "" << (uint)0 << "" << "WLAN_INFRA" << (uint)0x05000011 << QByteArray("osso@46@net"); + networks << QVariant(network1); + + // Connect signal + connect(mSubject, SIGNAL(callReply(const QString&, + const QList<QVariant>&, + const QString&)), + this, SLOT(complexCallReply(const QString&, + const QList<QVariant>&, + const QString&))); + + // Request connect and verify the call starts succesfully + QVERIFY(mSubject->callAsynchronous("connect_req", flags, networks)); + + QTest::qWait(1000); + + // Sanity checks for the scan result + QVERIFY(mInterface == "com.nokia.icd2"); // interface is icd2 + QVERIFY(mMethod == "connect_req"); // method connect_req +} + +QTEST_MAIN(Ut_DBusDispatcher) + +#include "ut_dbusdispatcher.moc" diff --git a/src/3rdparty/libconninet/tests/ut_iapconf.cpp b/src/3rdparty/libconninet/tests/ut_iapconf.cpp new file mode 100644 index 0000000..6a91d61 --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_iapconf.cpp @@ -0,0 +1,186 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Aapo Makela <aapo.makela@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + + +#include <QtTest/QtTest> +#include <QDebug> + +#include <iapconf.h> + +class Ut_IAPConf : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void setupIAP(); + void setupIAPContainingDot(); + void unsetIAPValueIsNotValid(); + void verifyAllIAPs(); + void allForEmptyConfReturnsEmptyList(); + void settingInvalidValueUnsetsKey(); + +private: + Maemo::IAPConf *mSubject; +}; + +void Ut_IAPConf::init() +{ + mSubject = new Maemo::IAPConf("test_iap"); +} + +void Ut_IAPConf::cleanup() +{ + // Clear made settings + mSubject->clear(); + + delete mSubject; + mSubject = 0; +} + +void Ut_IAPConf::initTestCase() +{ +} + +void Ut_IAPConf::cleanupTestCase() +{ +} + +void Ut_IAPConf::setupIAP() +{ + // Set bunch of values + mSubject->set("ipv4_type", "AUTO", + "wlan_wepkey1", "connt", + "wlan_wepdefkey", 1, + "wlan_ssid", QByteArray("CONNTEST-1")); + + // Set one value + mSubject->setValue("type", "WLAN_INFRA"); + + // Check all values that they were set correctly + QVERIFY(mSubject->value("ipv4_type").toString() == "AUTO"); + QVERIFY(mSubject->value("wlan_wepkey1").toString() == "connt"); + QVERIFY(mSubject->value("wlan_wepdefkey").toInt() == 1); + QVERIFY(mSubject->value("wlan_ssid").toByteArray() == QByteArray("CONNTEST-1")); + QVERIFY(mSubject->value("type").toString() == "WLAN_INFRA"); +} + +void Ut_IAPConf::setupIAPContainingDot() +{ + delete mSubject; + mSubject = new Maemo::IAPConf("test.iap"); + + // Set and check one value + mSubject->setValue("type", "DUMMY"); + QVERIFY(mSubject->value("type").toString() == "DUMMY"); +} + +void Ut_IAPConf::unsetIAPValueIsNotValid() +{ + QVariant invalidValue = mSubject->value("this_value_does_not_exist"); + QVERIFY(invalidValue.isValid() == false); +} + +void Ut_IAPConf::verifyAllIAPs() +{ + int count = 0, extras = 0; + QRegExp regexp("iap[1-3]"); + Maemo::IAPConf iap1("iap1"); + Maemo::IAPConf iap2("iap2"); + Maemo::IAPConf iap3("iap3"); + + iap1.clear(); + iap2.clear(); + iap3.clear(); + + iap1.setValue("name", "iap1"); + iap2.setValue("name", "iap2"); + iap3.setValue("name", "iap3"); + + count = extras = 0; + QList<QString> iaps; + Maemo::IAPConf::getAll(iaps, true); + foreach (QString iap_path, iaps) { + QString iap_id = iap_path.section('/', 5); /* This is the IAP id */ + if (!iap_id.contains(regexp)) { + extras++; + continue; + } + Maemo::IAPConf iap(iap_id); + QString name = iap.value("name").toString(); + QVERIFY(name == iap_id); + count++; + } + QCOMPARE(count, iaps.size()-extras); + + iap1.clear(); + iap2.clear(); + iap3.clear(); + + iap1.setValue("name", "iap1"); + iap2.setValue("name", "iap2"); + iap3.setValue("name", "iap3"); + + count = extras = 0; + Maemo::IAPConf::getAll(iaps); + foreach (QString iap_id, iaps) { + if (!iap_id.contains(regexp)) { + extras++; + continue; + } + Maemo::IAPConf iap(iap_id); + QString name = iap.value("name").toString(); + QVERIFY(name == iap_id); + count++; + } + QCOMPARE(count, iaps.size()-extras); +} + +void Ut_IAPConf::allForEmptyConfReturnsEmptyList() +{ + // Clear everything in configuration + mSubject->clearAll(); + + // Get all for a list and check that it is empty + QStringList iaps; + mSubject->getAll(iaps); + QVERIFY(iaps.isEmpty()); +} + +void Ut_IAPConf::settingInvalidValueUnsetsKey() +{ + // Setup some IAP + setupIAP(); + + // Set invalid value to unset "wlan_wepdefkey" key and verify that the + // value is unset + mSubject->setValue("wlan_wepdefkey", QVariant()); + QVERIFY(!mSubject->value("wlan_wepdefkey").isValid()); +} + +QTEST_MAIN(Ut_IAPConf) + +#include "ut_iapconf.moc" diff --git a/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp b/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp new file mode 100644 index 0000000..f14f623 --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp @@ -0,0 +1,118 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + + +#include <QtTest/QtTest> +#include <QDebug> + +#include <iapmonitor.h> +#include <iapconf.h> + +static const char *iap_id = "test_monitor_1"; + +class TestIAPMonitor : public Maemo::IAPMonitor +{ +public: + QString addedIap; + QString removedIap; + +protected: + virtual void iapAdded(const QString &id) + { + addedIap = id; + } + + virtual void iapRemoved(const QString &id) + { + removedIap = id; + } +}; + +class Ut_IAPMonitor : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void check(); + +private: + TestIAPMonitor *mon; + Maemo::IAPConf *iap; +}; + +void Ut_IAPMonitor::init() +{ + mon = new TestIAPMonitor; +} + +void Ut_IAPMonitor::cleanup() +{ + delete mon; + mon = 0; +} + +void Ut_IAPMonitor::initTestCase() +{ +} + +void Ut_IAPMonitor::cleanupTestCase() +{ +} + +void Ut_IAPMonitor::check() +{ + QVERIFY(mon->addedIap.isEmpty()); + + iap = new Maemo::IAPConf(iap_id); + iap->set("ipv4_type", "AUTO", + "wlan_wepkey1", "connt", + "wlan_wepdefkey", 1, + "wlan_ssid", QByteArray(iap_id)); + + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + QVERIFY(mon->addedIap == iap_id); + mon->addedIap.clear(); + + QVERIFY(mon->removedIap.isEmpty()); + + // Unset only one value and verify that IAP is not removed + iap->set("ipv4_type", QVariant()); + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + QVERIFY(mon->removedIap.isEmpty()); + + // Clear the whole IAP and check that it is removed + iap->clear(); + delete iap; + + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + QVERIFY(mon->removedIap == iap_id); +} + +QTEST_MAIN(Ut_IAPMonitor) + +#include "ut_iapmonitor.moc" diff --git a/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp b/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp new file mode 100644 index 0000000..494829d --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp @@ -0,0 +1,274 @@ +/* + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +// !!!! +// !!!! NOTE: THESE TEST DO NOT REALLY WORK YET BECAUSE OF MISSING +// !!!! FUNCTIONALITY IN ICD2 STUB. YOU HAVE BEEN WARNED. +// !!!! + + +#include <QtTest/QtTest> +#include <QCoreApplication> +#include <QEventLoop> +#include <QDebug> +#include <icd/dbus_api.h> + +#include "maemo_icd.h" + +class Ut_MaemoIcd : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void scan_req(); + void scan_cancel_req(); + void connect_req_default(); + void state_req_all(); + void state_req(); + void statistics_req_all(); + void statistics_req(); + void addrinfo_req_all(); + void addrinfo_req(); + +private: + void disconnect_req_default(); // this is currently not run + void connect_req_specific(); // this is currently not run + QProcess *icd_stub; + bool connect_iap(Maemo::IcdConnectResult &connect_result, + QString &result, + QString &error, + QString iap=QString()); +}; + + +QString create_error_str(Maemo::Icd &icd) +{ + return icd.error(); +} + + +void Ut_MaemoIcd::init() +{ + icd_stub = new QProcess(this); + icd_stub->setStandardOutputFile("/tmp/ut_maemo_icd.log"); + icd_stub->start("/usr/bin/icd2_stub.py"); + QTest::qWait(1000); + + // Set the statistics + QProcess dbus_send; + dbus_send.start("dbus-send --type=method_call --system " + "--dest=com.nokia.icd2 /com/nokia/icd2 " + "com.nokia.icd2.testing.set_statistics " + "uint32:1024 uint32:256"); + dbus_send.waitForFinished(); + +} + +void Ut_MaemoIcd::cleanup() +{ + icd_stub->terminate(); + icd_stub->waitForFinished(); +} + +void Ut_MaemoIcd::initTestCase() +{ +} + +void Ut_MaemoIcd::cleanupTestCase() +{ +} + +void Ut_MaemoIcd::scan_req() +{ + QList<Maemo::IcdScanResult> scanned; + QStringList scannedNetworkTypes; + QStringList networkTypesToScan; + QString error; + Maemo::Icd icd(ICD_SHORT_SCAN_TIMEOUT); + + scannedNetworkTypes = icd.scan(ICD_SCAN_REQUEST_ACTIVE, + networkTypesToScan, + scanned, + error); + QVERIFY(error.isEmpty()); + QCOMPARE(scanned.size(), 3); + QVERIFY(scannedNetworkTypes[0] == "WLAN_INFRA"); + QVERIFY(scannedNetworkTypes[1] == "DUN_GSM_PS"); +} + +void Ut_MaemoIcd::scan_cancel_req() +{ + Maemo::Icd icd; + icd.scanCancel(); + // Not much to verify here +} + +bool Ut_MaemoIcd::connect_iap(Maemo::IcdConnectResult &connect_result, + QString &result, + QString &error, + QString iap) +{ + icd_connection_flags flags = ICD_CONNECTION_FLAG_USER_EVENT; + bool st; + Maemo::Icd icd(ICD_SHORT_CONNECT_TIMEOUT); + + if (iap.isEmpty()) { + qDebug() << "connecting to default IAP"; + st = icd.connect(flags, connect_result); + } else { + qDebug() << "connecting to" << iap; + st = icd.connect(flags, iap, result); + } + + error = create_error_str(icd); + return st; +} + +void Ut_MaemoIcd::connect_req_default() +{ + Maemo::IcdConnectResult connect_result; + QString result, error; + bool st; + st = connect_iap(connect_result, result, error); + QVERIFY2(st, error.toAscii().data()); + result = connect_result.connect.network_id.data(); + qDebug() << result; +} + + +void Ut_MaemoIcd::disconnect_req_default() +{ + icd_connection_flags flags = ICD_CONNECTION_FLAG_USER_EVENT; + bool st; + Maemo::Icd icd(ICD_SHORT_CONNECT_TIMEOUT); + icd.disconnect(flags); +} + + +void Ut_MaemoIcd::connect_req_specific() +{ + Maemo::IcdConnectResult connect_result; + QString result; + QString error; + bool st; + st = connect_iap(connect_result, result, error, "wpa2gx2.osso.net"); + QVERIFY2(st, error.toAscii().data()); + qDebug() << result; +} + + +void Ut_MaemoIcd::state_req_all() +{ + QList<Maemo::IcdStateResult> state_results; + Maemo::Icd icd; + int sig; + sig = icd.state(state_results); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +void Ut_MaemoIcd::state_req() +{ + Maemo::IcdStateResult state_result; + Maemo::Icd icd; + int sig; + QString service_type, service_id; + QString network_type("WLAN_INFRA"); + QByteArray network_id("wpa2gx2.osso.net"); + sig = icd.state(service_type, 0, service_id, + network_type, (uint)0x17a1, network_id, + state_result); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +void Ut_MaemoIcd::statistics_req_all() +{ + QList<Maemo::IcdStatisticsResult> stats_results; + Maemo::Icd icd; + int sig; + QString err; + sig = icd.statistics(stats_results); + err = create_error_str(icd); + if (!err.isEmpty()) + QVERIFY2(sig==1, err.toAscii().data()); + else + QCOMPARE(sig, 1); + + for(int i=0; i<sig; i++) { + QVERIFY(stats_results[i].bytes_received == 1024); + QVERIFY(stats_results[i].bytes_sent == 256); + } +} + + +// Can be uncommented when needed function is enabled in Icd class +void Ut_MaemoIcd::statistics_req() +{ + Maemo::IcdStatisticsResult stats_result; + Maemo::Icd icd; + int sig; + QString service_type, service_id; + QString network_type("WLAN_INFRA"); + QByteArray network_id("wpa2gx2.osso.net"); + sig = icd.statistics(service_type, 0, service_id, + network_type, (uint)0x17a1, network_id, + stats_result); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); + QVERIFY(stats_result.bytes_received == 1024); + QVERIFY(stats_result.bytes_sent == 256); +} + + +void Ut_MaemoIcd::addrinfo_req_all() +{ + QList<Maemo::IcdAddressInfoResult> addr_results; + Maemo::Icd icd; + int sig; + sig = icd.addrinfo(addr_results); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +void Ut_MaemoIcd::addrinfo_req() +{ + Maemo::IcdAddressInfoResult addr_result; + Maemo::Icd icd; + int sig; + QString service_type, service_id; + QString network_type("WLAN_INFRA"); + QByteArray network_id("wpa2gx2.osso.net"); + sig = icd.addrinfo(service_type, 0, service_id, + network_type, (uint)0x17a1, network_id, + addr_result); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +QTEST_MAIN(Ut_MaemoIcd) + +#include "ut_maemo_icd.moc" diff --git a/src/3rdparty/libconninet/tests/ut_proxyconf.cpp b/src/3rdparty/libconninet/tests/ut_proxyconf.cpp new file mode 100644 index 0000000..1f407f0 --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_proxyconf.cpp @@ -0,0 +1,400 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen <jukka.rissanen@nokia.com> + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + + +#include <QtTest/QtTest> +#include <QDebug> +#include <QNetworkProxy> +#include <conn_settings.h> + +#include "../src/proxyconf.h" + +class Ut_ProxyConf : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + // tests without the factory + void proxy_ftp_no_factory_ok_auto(); + void proxy_ftp_no_factory_ok_manual(); + void proxy_http_no_factory_ok_manual(); + void proxy_https_no_factory_ok_manual(); + void proxy_socks_no_factory_ok_manual(); + void proxy_default_no_factory_ok_manual(); + + // tests using the factory + void proxy_ftp_factory_ok_auto(); + void proxy_ftp_factory_ok_manual(); + void proxy_http_factory_ok_manual(); + void proxy_https_factory_ok_manual(); + void proxy_socks_factory_ok_manual(); + void proxy_http_factory_ok_manual_clear(); + void proxy_default_factory_ok_manual(); + void proxy_http_factory_ok_manual_ignore_list(); + void proxy_default_factory_ok_manual_system(); + +private: + Maemo::ProxyConf *pc; +}; + + +void put(QString var, QString type, QString value) +{ + QProcess gconf; + if (value.isEmpty()) + gconf.start(QString("gconftool-2 -u /system/proxy/"+var)); + else + gconf.start(QString("gconftool-2 -s /system/proxy/"+var+" -t "+type+" "+value)); + gconf.waitForFinished(); +} + +void put_http(QString var, QString type, QString value) +{ + QProcess gconf; + if (value.isEmpty()) + gconf.start(QString("gconftool-2 -u /system/http_proxy/"+var)); + else + gconf.start(QString("gconftool-2 -s /system/http_proxy/"+var+" -t "+type+" "+value)); + gconf.waitForFinished(); +} + +void put_list(QString var, QString type, QList<QString> value) +{ + QProcess gconf; + QString values = "["; + foreach (QString str, value) + values = values + str + ","; + values.chop(1); + values = values + "]"; + + gconf.start(QString("gconftool-2 -s /system/http_proxy/"+var+" -t list --list-type="+type+" "+values)); + gconf.waitForFinished(); +} + + +void Ut_ProxyConf::init() +{ + put_http("host", "string", "my.proxy.com"); + put_http("port", "int", "8080"); + + QList<QString> list; + list.append("foo.bar.com"); + list.append("192.168.19.69"); + list.append("192.168.20.0/24"); + list.append("bar.foo.com"); + put_list("ignore_hosts", "string", list); + put_http("use_http_host", "boolean", "true"); + + put("mode", "string", "auto"); + put("autoconfig_url", "string", "http://foo.bar.com/autoconf"); + put("secure_host", "string", "secure_host.com"); + put("secure_port", "int", "112"); + + put("ftp_host", "string", "ftp.nuukia.com"); + put("ftp_port", "int", "2000"); + put("socks_host", "string", "socks.host.com"); + put("socks_port", "int", "10080"); + put("rtsp_host", "string", "rtsp.voice.com"); + put("rtsp_port", "int", "1554"); + + pc = new Maemo::ProxyConf(); +} + +void Ut_ProxyConf::cleanup() +{ + delete pc; + pc = 0; +} + +void Ut_ProxyConf::initTestCase() +{ +} + +void Ut_ProxyConf::cleanupTestCase() +{ +} + + +void Ut_ProxyConf::proxy_ftp_no_factory_ok_auto() +{ + QList<QNetworkProxy> nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + + nplist = pc->flush(query); + QVERIFY(nplist.length()==0); +} + + +void Ut_ProxyConf::proxy_ftp_no_factory_ok_manual() +{ + QList<QNetworkProxy> nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + + put("mode", "string", "manual"); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==3); + QVERIFY(nplist.first().type() == QNetworkProxy::FtpCachingProxy); +} + + +void Ut_ProxyConf::proxy_http_no_factory_ok_manual() +{ + QList<QNetworkProxy> nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + + put("mode", "string", "manual"); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==3); + QVERIFY(nplist.first().type() == QNetworkProxy::HttpProxy); +} + + +void Ut_ProxyConf::proxy_https_no_factory_ok_manual() +{ + QList<QNetworkProxy> nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("https://maps.google.com/")); + + put("mode", "string", "manual"); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==2); + QVERIFY(nplist.first().type() == QNetworkProxy::HttpProxy); +} + + +void Ut_ProxyConf::proxy_socks_no_factory_ok_manual() +{ + QList<QNetworkProxy> nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + + put("mode", "string", "manual"); + put_http("host", "string", ""); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==2); + QVERIFY(nplist.first().type() == QNetworkProxy::Socks5Proxy); +} + + +void Ut_ProxyConf::proxy_default_no_factory_ok_manual() +{ + QList<QNetworkProxy> nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("foobar://maps.google.com/")); + + put("mode", "string", "manual"); + put("socks_host", "string", ""); + put("secure_host", "string", ""); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==0); +} + + +void Ut_ProxyConf::proxy_ftp_factory_ok_auto() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + Maemo::ProxyConf::update(); + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_ftp_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::FtpCachingProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_http_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_https_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("https://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==2); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_socks_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + put_http("host", "string", ""); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==2); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::Socks5Proxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_http_factory_ok_manual_clear() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + put_http("host", "string", "192.168.1.1"); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + + Maemo::ProxyConf::clear(); + listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); +} + + +void Ut_ProxyConf::proxy_default_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("foobar://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + put("socks_host", "string", ""); + put("secure_host", "string", ""); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_http_factory_ok_manual_ignore_list() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://192.168.19.70/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + + query = QNetworkProxyQuery(QUrl("http://192.168.20.10/")); + listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_default_factory_ok_manual_system() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList<QNetworkProxy> listOfProxies = QNetworkProxyFactory::systemProxyForQuery(query); + + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + + + +QTEST_MAIN(Ut_ProxyConf) + +#include "ut_proxyconf.moc" diff --git a/src/3rdparty/libgq.pri b/src/3rdparty/libgq.pri new file mode 100644 index 0000000..a89706a --- /dev/null +++ b/src/3rdparty/libgq.pri @@ -0,0 +1,9 @@ +INCLUDEPATH += $$PWD/libgq/gconf + +HEADERS += \ + $$PWD/libgq/gconf/gconfitem.h \ + $$PWD/libgq/gconf/GConfItem + +SOURCES += \ + $$PWD/libgq/gconf/gconfitem.cpp + diff --git a/src/3rdparty/libgq/.gitignore b/src/3rdparty/libgq/.gitignore new file mode 100644 index 0000000..70a4735 --- /dev/null +++ b/src/3rdparty/libgq/.gitignore @@ -0,0 +1,37 @@ +/Makefile.in +/aclocal.m4 +/autom4te.cache/ +/config.guess +/config.sub +/configure +/depcomp +/gconf/Makefile.in +/install-sh +/ltmain.sh +/missing +/Makefile +/config.log +/config.status +/gconf/.deps/ +/gconf/Makefile +/libtool +/confdefs.h +/gconf/.libs/ +/gconf/libgq-gconf.la +/gconf/gq-gconf.pc +/gconf/moc_gconfitem_h.cpp +/gconf/mocs.cpp +/gconf/test-gconf +/gconf/gconfitem_moc.cpp +/gconf/test-gconf_moc.cpp +/libgq-*.tar.gz +/debian/libgq-gconf-dev/ +/debian/libgq-gconf0/ +/debian/tmp/ +/debian/libgq-gconf0-dbg/ +/debian/libgq-gconf-doc/ +/debian/*.debhelper.log +/debian/*.substvars +/debian/files +/debian/*.debhelper +/gconf/html/ diff --git a/src/3rdparty/libgq/Makefile.am b/src/3rdparty/libgq/Makefile.am new file mode 100644 index 0000000..42b3ece --- /dev/null +++ b/src/3rdparty/libgq/Makefile.am @@ -0,0 +1,4 @@ +SUBDIRS = gconf + +dist-hook: + rm -rf `find $(distdir) -name '*_moc.cpp'` diff --git a/src/3rdparty/libgq/README b/src/3rdparty/libgq/README new file mode 100644 index 0000000..c37abba --- /dev/null +++ b/src/3rdparty/libgq/README @@ -0,0 +1,6 @@ +This is libgq, a set of small libraries with Q wrappers for G things. + +* GConf + +The libgq-gconf library contains the GConfItem class for accessing +GConf. diff --git a/src/3rdparty/libgq/autogen.sh b/src/3rdparty/libgq/autogen.sh new file mode 100755 index 0000000..0a4a034 --- /dev/null +++ b/src/3rdparty/libgq/autogen.sh @@ -0,0 +1,2 @@ +#! /bin/sh +autoreconf --install --force -v diff --git a/src/3rdparty/libgq/configure.ac b/src/3rdparty/libgq/configure.ac new file mode 100644 index 0000000..f4fc2be --- /dev/null +++ b/src/3rdparty/libgq/configure.ac @@ -0,0 +1,23 @@ +AC_INIT([libgq],[0.2],[marius.vollmer@nokia.com],[libgq]) +AC_CONFIG_SRCDIR([Makefile.am]) +AM_INIT_AUTOMAKE([-Wall -Werror tar-ustar foreign]) + +AC_PROG_CXX +AC_PROG_LIBTOOL + +PKG_CHECK_MODULES([QT], [QtCore]) +PKG_CHECK_MODULES([QTEST], [QtTest]) +PKG_CHECK_MODULES([GLIB], [glib-2.0]) +PKG_CHECK_MODULES([GCONF], [gconf-2.0]) + +MOC=`pkg-config QtCore --variable=moc_location` +RCC=`pkg-config QtCore --variable=exec_prefix`/bin/rcc + +AC_SUBST([MOC]) +AC_SUBST([RCC]) + +AC_CONFIG_FILES([Makefile + gconf/Makefile + gconf/gq-gconf.pc]) + +AC_OUTPUT diff --git a/src/3rdparty/libgq/debian/README.scratchbox b/src/3rdparty/libgq/debian/README.scratchbox new file mode 100644 index 0000000..23ba793 --- /dev/null +++ b/src/3rdparty/libgq/debian/README.scratchbox @@ -0,0 +1,28 @@ +This packages behaves a bit wierdly inside Scratchbox 1, by design. + +When building it with dpkg-buildpackage or equivalent, it will disable +all devkits and adjust PATH. This means that almost all build +dependencies will come from your installed packages, and not from +Scratchbox or the configured devkits. + +Since some of our packages do not work with Scratchboxes fakeroot +(because the latter is too old), you should use the targets fakeroot +instead. + +You can disable this behavior by setting SBOX_DONT_SANITIZE in the +environment. + +When this package is build in a certain buildbot, it will go further +and permantly change the Scratchbox target. This should not happen to +anyone but the buildbot, but there is a chance it will happen to you +by accident. + +The buildbot is recognized via the $USER environment variable. If it +matches "bifh[0-9]", the permanent changes will be done. + +The permanent changes mostly consist of running apt-get dist-upgrade +and making sure that the targets fakeroot is used. + +This weirdness is brought to you by: + + http://maemo.gitorious.org/maemo-af/maemoify-tools diff --git a/src/3rdparty/libgq/debian/changelog b/src/3rdparty/libgq/debian/changelog new file mode 100644 index 0000000..f624254 --- /dev/null +++ b/src/3rdparty/libgq/debian/changelog @@ -0,0 +1,31 @@ +libgq (0.4+0m6) unstable; urgency=low + + * This entry has been added by BIFH queue processor + version has been changed to 0.4+0m6 + + -- Marius Vollmer <marius.vollmer@nokia.com> Fri, 04 Jun 2010 18:28:43 +0300 + +libgq (0.4) unstable; urgency=low + + * Never release the GConf client, to avoid having to recreate it + immediately. Might fix NB#164690. + + -- Marius Vollmer <marius.vollmer@nokia.com> Fri, 04 Jun 2010 18:10:50 +0300 + +libgq (0.3) unstable; urgency=low + + * Added autotools to Build-Depends. + + -- Marius Vollmer <marius.vollmer@nokia.com> Tue, 23 Feb 2010 12:04:45 +0200 + +libgq (0.2) unstable; urgency=low + + * Build fixes. + + -- Marius Vollmer <marius.vollmer@nokia.com> Wed, 16 Dec 2009 15:56:05 +0200 + +libgq (0.1) unstable; urgency=low + + * Initial release. + + -- Marius Vollmer <marius.vollmer@nokia.com> Wed, 16 Dec 2009 15:54:46 +0200 diff --git a/src/3rdparty/libgq/debian/compat b/src/3rdparty/libgq/debian/compat new file mode 100644 index 0000000..7f8f011 --- /dev/null +++ b/src/3rdparty/libgq/debian/compat @@ -0,0 +1 @@ +7 diff --git a/src/3rdparty/libgq/debian/control b/src/3rdparty/libgq/debian/control new file mode 100644 index 0000000..3feaa46 --- /dev/null +++ b/src/3rdparty/libgq/debian/control @@ -0,0 +1,43 @@ +Source: libgq +Section: libs +Priority: extra +Maintainer: Marius Vollmer <marius.vollmer@nokia.com> +Origin: maemo +Build-Depends: debhelper (>= 7), libqt4-dev, doxygen, libgconf2-dev, libglib2.0-dev, autoconf, automake, libtool +Vcs-Browser: http://gitorious.org/maemo-af/libgq +Vcs-Git: git@gitorious.org:maemo-af/libgq.git + +Package: libgq-gconf0 +Architecture: any +Depends: ${shlibs:Depends} +Description: a Qt wrapper for GConf + This library contains the GConfItem class, for easy + access to GConf from Qt programs. + . + This package contains the shared run-time library. + +Package: libgq-gconf0-dbg +Architecture: any +Depends: libgq-gconf0 (= ${source:Version}) +Description: a Qt wrapper for GConf + This library contains the GConfItem class, for easy + access to GConf from Qt programs. + . + This package contains the debugging symbols. + +Package: libgq-gconf-dev +Architecture: any +Depends: libgq-gconf0 (= ${source:Version}), libqt4-dev, libgconf2-dev +Description: a Qt wrapper for GConf + This library contains the GConfItem class, for easy + access to GConf from Qt programs. + . + This package contains the development files. + +Package: libgq-gconf-doc +Architecture: all +Description: a Qt wrapper for GConf + This library contains the GConfItem class, for easy + access to GConf from Qt programs. + . + This package contains the documentation. diff --git a/src/3rdparty/libgq/debian/copyright b/src/3rdparty/libgq/debian/copyright new file mode 100644 index 0000000..45b04e6 --- /dev/null +++ b/src/3rdparty/libgq/debian/copyright @@ -0,0 +1,8 @@ +Copyright (c) 2009 Nokia Corporation. + +This program, is free software; you can redistribute it and/or modify +it under the terms of the GNU Lesser General Public License version +2.1 as published by the Free Software Foundation. + +The full text of the LGPL 2.1 can be found in +/usr/share/common-licenses. diff --git a/src/3rdparty/libgq/debian/fixup-scratchbox b/src/3rdparty/libgq/debian/fixup-scratchbox new file mode 100755 index 0000000..b39ad5f --- /dev/null +++ b/src/3rdparty/libgq/debian/fixup-scratchbox @@ -0,0 +1,79 @@ +#! /bin/sh + +# XXX - this needs to run under fakeroot... + +exec 3>&1 1>&2 + +real_dpkg_checkbuilddeps () { + SBOX_REDIRECT_IGNORE=/usr/bin/perl /usr/bin/perl /usr/bin/dpkg-checkbuilddeps "$@" +} + +finish () { + if ! real_dpkg_checkbuilddeps; then + echo "This package does not use any devkits." + echo "Please install all build dependencies as real packages." + echo >&3 FAIL + fi + exit 0 +} + +# The stamp file can not be in the source tree because then it would +# end up in the source package, which is not what we want. We put it +# into /var/tmp so that it gets deleted when a new rootstrap is +# extracted. + +STAMP=/var/tmp/SANITIZED.$(head debian/changelog | md5sum | cut -d' ' -f1) + +if [ -e $STAMP ]; then + exit 0; +fi + +# Only do permanent changes if this is BIFH + +echo "$USER" | grep -q 'bifh[0-9]' || finish + +# prevent bash from killing the system +rm -f /var/lib/bash/provide-sh + +# clean ~/.texmf-var to avoid trouble with stale things hiding there. +rm -rf ~/.texmf-var/ + +pfx="dpkg-checkbuilddeps: Unmet build dependencies:" +deps=`real_dpkg_checkbuilddeps 2>&1 | grep "^$pfx" | \ + sed -e "s/$pfx//" -e s'/([^)]*)//g' -e 's/|//'` +deps="$deps build-essential automake autoconf libtool ed gawk diff dpkg-dev" +for d in $deps; do + echo apt-get "$@" install $d + apt-get -o DPkg::Options::=--force-confold -q --force-yes --yes install $d +done +apt-get -o DPkg::Options::=--force-confold -q --force-yes --yes dist-upgrade + +# Make sure we get a fresh fakeroot installation + +# We can't seem to control the value of LD_PRELOAD well enough, so we +# just copy the good version of libfakeroot over the bad one that +# Scratchbox uses. This will result in a good version of libfakeroot +# talking to a bad version of faked, but that seems to work well +# enough. The protocol between the two is really simple and unlikely +# to change even when new syscalls are wrapped. And this is a +# desperate hack anyway, so it's OK if there is blood all over the +# floor from time to time. +# +# After we have overwritten libfakeroot, it no longer works with any +# host binaries, such as the ones in /scratchbox/compilers/bin or +# /scratchbox/tools/bin. Thus, we must avoid running those when +# fakerooted. +# +# We use "cp -l" here to avoid overwriting a library that is in use. +# +if [ "$(fakeroot -v)" = "fakeroot version 1.4.2" ]; then + apt-get -q --force-yes --yes --reinstall install fakeroot + cp -fl /usr/lib/libfakeroot/libfakeroot-sysv.so /usr/lib/libfakeroot-sysv/libfakeroot.so.0 + cp -fl /usr/lib/libfakeroot/libfakeroot-tcp.so /usr/lib/libfakeroot-tcp/libfakeroot.so.0 +else + echo "We have $(fakeroot -v), hurray!" +fi + +touch $STAMP + +finish diff --git a/src/3rdparty/libgq/debian/libgq-gconf-dev.install b/src/3rdparty/libgq/debian/libgq-gconf-dev.install new file mode 100644 index 0000000..b3d949f --- /dev/null +++ b/src/3rdparty/libgq/debian/libgq-gconf-dev.install @@ -0,0 +1,5 @@ +usr/include/gq/GConfItem +usr/include/gq/gconfitem.h +usr/lib/libgq-gconf.so +usr/lib/libgq-gconf.a +usr/lib/pkgconfig/gq-gconf.pc diff --git a/src/3rdparty/libgq/debian/libgq-gconf-doc.install b/src/3rdparty/libgq/debian/libgq-gconf-doc.install new file mode 100644 index 0000000..9007055 --- /dev/null +++ b/src/3rdparty/libgq/debian/libgq-gconf-doc.install @@ -0,0 +1 @@ +gconf/html usr/share/doc/libgq-gconf-doc/ diff --git a/src/3rdparty/libgq/debian/libgq-gconf0.install b/src/3rdparty/libgq/debian/libgq-gconf0.install new file mode 100644 index 0000000..4ca6283 --- /dev/null +++ b/src/3rdparty/libgq/debian/libgq-gconf0.install @@ -0,0 +1 @@ +usr/lib/libgq-gconf.so.* diff --git a/src/3rdparty/libgq/debian/maemo-sanitize b/src/3rdparty/libgq/debian/maemo-sanitize new file mode 100644 index 0000000..e69de29 --- /dev/null +++ b/src/3rdparty/libgq/debian/maemo-sanitize diff --git a/src/3rdparty/libgq/debian/rules b/src/3rdparty/libgq/debian/rules new file mode 100755 index 0000000..1f293b3 --- /dev/null +++ b/src/3rdparty/libgq/debian/rules @@ -0,0 +1,32 @@ +#! /usr/bin/make -f + +# Sanitize build environment when running inside Scratchbox 1 +ifneq (,$(wildcard /targets)) + ifeq (,$(SBOX_DONT_SANITIZE)) + export PATH:=/bin:/usr/bin + export MAKE:=make + ifeq (,$(FAKEROOTKEY)) + export SBOX_REDIRECT_TO_DIRS:=/scratchbox/compilers/bin + else + export SBOX_REDIRECT_TO_DIRS:= + endif + ifneq (,$(shell debian/fixup-scratchbox)) + $(error Error) + endif + endif +endif + +override_dh_auto_configure: + ./autogen.sh + dh_auto_configure + +override_dh_auto_build: + dh_auto_build + cd gconf && doxygen + +override_dh_strip: + dh_strip -plibgq-gconf0 --dbg-package=libgq-gconf0-dbg + dh_strip + +%: + dh $@ diff --git a/src/3rdparty/libgq/gconf/Doxyfile b/src/3rdparty/libgq/gconf/Doxyfile new file mode 100644 index 0000000..7f5c11a --- /dev/null +++ b/src/3rdparty/libgq/gconf/Doxyfile @@ -0,0 +1,1514 @@ +# Doxyfile 1.6.1 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# This tag specifies the encoding used for all characters in the config file +# that follow. The default is UTF-8 which is also the encoding used for all +# text before the first occurrence of this tag. Doxygen uses libiconv (or the +# iconv built into libc) for the transcoding. See +# http://www.gnu.org/software/libiconv for the list of possible encodings. + +DOXYFILE_ENCODING = UTF-8 + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = gq-gconf + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 4096 sub-directories (in 2 levels) under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of +# source files, where putting all generated files in the same directory would +# otherwise cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Afrikaans, Arabic, Brazilian, Catalan, Chinese, Chinese-Traditional, +# Croatian, Czech, Danish, Dutch, Esperanto, Farsi, Finnish, French, German, +# Greek, Hungarian, Italian, Japanese, Japanese-en (Japanese with English +# messages), Korean, Korean-en, Lithuanian, Norwegian, Macedonian, Persian, +# Polish, Portuguese, Romanian, Russian, Serbian, Serbian-Cyrilic, Slovak, +# Slovene, Spanish, Swedish, Ukrainian, and Vietnamese. + +OUTPUT_LANGUAGE = English + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is +# used as the annotated text. Otherwise, the brief description is used as-is. +# If left blank, the following values are used ("$name" is automatically +# replaced with the name of the entity): "The $name class" "The $name widget" +# "The $name file" "is" "provides" "specifies" "contains" +# "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all +# inherited members of a class in the documentation of that class as if those +# members were ordinary class members. Constructors, destructors and assignment +# operators of the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = YES + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like regular Qt-style comments +# (thus requiring an explicit @brief command for a brief description.) + +JAVADOC_AUTOBRIEF = NO + +# If the QT_AUTOBRIEF tag is set to YES then Doxygen will +# interpret the first line (until the first dot) of a Qt-style +# comment as the brief description. If set to NO, the comments +# will behave just like regular Qt-style comments (thus requiring +# an explicit \brief command for a brief description.) + +QT_AUTOBRIEF = NO + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce +# a new page for each member. If set to NO, the documentation of a member will +# be part of the file/class/namespace that contains it. + +SEPARATE_MEMBER_PAGES = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C +# sources only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = NO + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java +# sources only. Doxygen will then generate output that is more tailored for +# Java. For instance, namespaces will be presented as packages, qualified +# scopes will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the OPTIMIZE_FOR_FORTRAN tag to YES if your project consists of Fortran +# sources only. Doxygen will then generate output that is more tailored for +# Fortran. + +OPTIMIZE_FOR_FORTRAN = NO + +# Set the OPTIMIZE_OUTPUT_VHDL tag to YES if your project consists of VHDL +# sources. Doxygen will then generate output that is tailored for +# VHDL. + +OPTIMIZE_OUTPUT_VHDL = NO + +# Doxygen selects the parser to use depending on the extension of the files it parses. +# With this tag you can assign which parser to use for a given extension. +# Doxygen has a built-in mapping, but you can override or extend it using this tag. +# The format is ext=language, where ext is a file extension, and language is one of +# the parsers supported by doxygen: IDL, Java, Javascript, C#, C, C++, D, PHP, +# Objective-C, Python, Fortran, VHDL, C, C++. For instance to make doxygen treat +# .inc files as Fortran files (default is PHP), and .f files as C (default is Fortran), +# use: inc=Fortran f=C. Note that for custom extensions you also need to set FILE_PATTERNS otherwise the files are not read by doxygen. + +EXTENSION_MAPPING = + +# If you use STL classes (i.e. std::string, std::vector, etc.) but do not want +# to include (a tag file for) the STL sources as input, then you should +# set this tag to YES in order to let doxygen match functions declarations and +# definitions whose arguments contain STL classes (e.g. func(std::string); v.s. +# func(std::string) {}). This also make the inheritance and collaboration +# diagrams that involve STL classes more complete and accurate. + +BUILTIN_STL_SUPPORT = NO + +# If you use Microsoft's C++/CLI language, you should set this option to YES to +# enable parsing support. + +CPP_CLI_SUPPORT = NO + +# Set the SIP_SUPPORT tag to YES if your project consists of sip sources only. +# Doxygen will parse them like normal C++ but will assume all classes use public +# instead of private inheritance when no explicit protection keyword is present. + +SIP_SUPPORT = NO + +# For Microsoft's IDL there are propget and propput attributes to indicate getter +# and setter methods for a property. Setting this option to YES (the default) +# will make doxygen to replace the get and set methods by a property in the +# documentation. This will only work if the methods are indeed getting or +# setting a simple type. If this is not the case, or you want to show the +# methods anyway, you should set this option to NO. + +IDL_PROPERTY_SUPPORT = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +# When TYPEDEF_HIDES_STRUCT is enabled, a typedef of a struct, union, or enum +# is documented as struct, union, or enum with the name of the typedef. So +# typedef struct TypeS {} TypeT, will appear in the documentation as a struct +# with name TypeT. When disabled the typedef will appear as a member of a file, +# namespace, or class. And the struct will be named TypeS. This can typically +# be useful for C code in case the coding convention dictates that all compound +# types are typedef'ed and only the typedef is referenced, never the tag name. + +TYPEDEF_HIDES_STRUCT = NO + +# The SYMBOL_CACHE_SIZE determines the size of the internal cache use to +# determine which symbols to keep in memory and which to flush to disk. +# When the cache is full, less often used symbols will be written to disk. +# For small to medium size projects (<1000 input files) the default value is +# probably good enough. For larger projects a too small cache size can cause +# doxygen to be busy swapping symbols to and from disk most of the time +# causing a significant performance penality. +# If the system has enough physical memory increasing the cache will improve the +# performance by keeping more symbols in memory. Note that the value works on +# a logarithmic scale so increasing the size by one will rougly double the +# memory usage. The cache size is given by this formula: +# 2^(16+SYMBOL_CACHE_SIZE). The valid range is 0..9, the default is 0, +# corresponding to a cache size of 2^16 = 65536 symbols + +SYMBOL_CACHE_SIZE = 0 + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If this flag is set to YES, the members of anonymous namespaces will be +# extracted and appear in the documentation as a namespace called +# 'anonymous_namespace{file}', where file will be replaced with the base +# name of the file that contains the anonymous namespace. By default +# anonymous namespace are hidden. + +EXTRACT_ANON_NSPACES = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = NO + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# and Mac users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_MEMBERS_CTORS_1ST tag is set to YES then doxygen will sort the (brief and detailed) documentation of class members so that constructors and destructors are listed first. If set to NO (the default) the constructors will appear in the respective orders defined by SORT_MEMBER_DOCS and SORT_BRIEF_DOCS. This tag will be ignored for brief docs if SORT_BRIEF_DOCS is set to NO and ignored for detailed docs if SORT_MEMBER_DOCS is set to NO. + +SORT_MEMBERS_CTORS_1ST = NO + +# If the SORT_GROUP_NAMES tag is set to YES then doxygen will sort the +# hierarchy of group names into alphabetical order. If set to NO (the default) +# the group names will appear in their defined order. + +SORT_GROUP_NAMES = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +# If the sources in your project are distributed over multiple directories +# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy +# in the documentation. The default is NO. + +SHOW_DIRECTORIES = NO + +# Set the SHOW_FILES tag to NO to disable the generation of the Files page. +# This will remove the Files entry from the Quick Index and from the +# Folder Tree View (if specified). The default is YES. + +SHOW_FILES = YES + +# Set the SHOW_NAMESPACES tag to NO to disable the generation of the +# Namespaces page. +# This will remove the Namespaces entry from the Quick Index +# and from the Folder Tree View (if specified). The default is YES. + +SHOW_NAMESPACES = YES + +# The FILE_VERSION_FILTER tag can be used to specify a program or script that +# doxygen should invoke to get the current version for each file (typically from +# the version control system). Doxygen will invoke the program by executing (via +# popen()) the command <command> <input-file>, where <command> is the value of +# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file +# provided by doxygen. Whatever the program writes to standard output +# is used as the file version. See the manual for examples. + +FILE_VERSION_FILTER = + +# The LAYOUT_FILE tag can be used to specify a layout file which will be parsed by +# doxygen. The layout file controls the global structure of the generated output files +# in an output format independent way. The create the layout file that represents +# doxygen's defaults, run doxygen with the -l option. You can optionally specify a +# file name after the option, if omitted DoxygenLayout.xml will be used as the name +# of the layout file. + +LAYOUT_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# This WARN_NO_PARAMDOC option can be abled to get warnings for +# functions that are documented, but have no documentation for their parameters +# or return value. If set to NO (the default) doxygen will only warn about +# wrong or incomplete parameter documentation, but not about the absence of +# documentation. + +WARN_NO_PARAMDOC = NO + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. Optionally the format may contain +# $version, which will be replaced by the version of the file (if it could +# be obtained via FILE_VERSION_FILTER) + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = gconfitem.h gconfitem.cpp + +# This tag can be used to specify the character encoding of the source files +# that doxygen parses. Internally doxygen uses the UTF-8 encoding, which is +# also the default input encoding. Doxygen uses libiconv (or the iconv built +# into libc) for the transcoding. See http://www.gnu.org/software/libiconv for +# the list of possible encodings. + +INPUT_ENCODING = UTF-8 + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx +# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm *.py *.f90 + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or +# directories that are symbolic links (a Unix filesystem feature) are excluded +# from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. Note that the wildcards are matched +# against the file with absolute path, so to exclude all test directories +# for example use the pattern */test/* + +EXCLUDE_PATTERNS = + +# The EXCLUDE_SYMBOLS tag can be used to specify one or more symbol names +# (namespaces, classes, functions, etc.) that should be excluded from the +# output. The symbol name can be a fully qualified name, a word, or if the +# wildcard * is used, a substring. Examples: ANamespace, AClass, +# AClass::ANamespace, ANamespace::*Test + +EXCLUDE_SYMBOLS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command <filter> <input-file>, where <filter> +# is the value of the INPUT_FILTER tag, and <input-file> is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. +# If FILTER_PATTERNS is specified, this tag will be +# ignored. + +INPUT_FILTER = + +# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern +# basis. +# Doxygen will compare the file name with each pattern and apply the +# filter if there is a match. +# The filters are a list of the form: +# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further +# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER +# is applied to all files. + +FILTER_PATTERNS = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = NO + +# If the REFERENCES_RELATION tag is set to YES +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = NO + +# If the REFERENCES_LINK_SOURCE tag is set to YES (the default) +# and SOURCE_BROWSER tag is set to YES, then the hyperlinks from +# functions in REFERENCES_RELATION and REFERENCED_BY_RELATION lists will +# link to the source code. +# Otherwise they will link to the documentation. + +REFERENCES_LINK_SOURCE = YES + +# If the USE_HTAGS tag is set to YES then the references to source code +# will point to the HTML generated by the htags(1) tool instead of doxygen +# built-in source browser. The htags tool is part of GNU's global source +# tagging system (see http://www.gnu.org/software/global/global.html). You +# will need version 4.8.6 or higher. + +USE_HTAGS = NO + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = YES + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the HTML_DYNAMIC_SECTIONS tag is set to YES then the generated HTML +# documentation will contain sections that can be hidden and shown after the +# page has loaded. For this to work a browser that supports +# JavaScript and DHTML is required (for instance Mozilla 1.0+, Firefox +# Netscape 6.0+, Internet explorer 5.0+, Konqueror, or Safari). + +HTML_DYNAMIC_SECTIONS = NO + +# If the GENERATE_DOCSET tag is set to YES, additional index files +# will be generated that can be used as input for Apple's Xcode 3 +# integrated development environment, introduced with OSX 10.5 (Leopard). +# To create a documentation set, doxygen will generate a Makefile in the +# HTML output directory. Running make will produce the docset in that +# directory and running "make install" will install the docset in +# ~/Library/Developer/Shared/Documentation/DocSets so that Xcode will find +# it at startup. +# See http://developer.apple.com/tools/creatingdocsetswithdoxygen.html for more information. + +GENERATE_DOCSET = NO + +# When GENERATE_DOCSET tag is set to YES, this tag determines the name of the +# feed. A documentation feed provides an umbrella under which multiple +# documentation sets from a single provider (such as a company or product suite) +# can be grouped. + +DOCSET_FEEDNAME = "Doxygen generated docs" + +# When GENERATE_DOCSET tag is set to YES, this tag specifies a string that +# should uniquely identify the documentation set bundle. This should be a +# reverse domain-name style string, e.g. com.mycompany.MyDocSet. Doxygen +# will append .docset to the name. + +DOCSET_BUNDLE_ID = org.doxygen.Project + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compiled HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_INDEX_ENCODING +# is used to encode HtmlHelp index (hhk), content (hhc) and project file +# content. + +CHM_INDEX_ENCODING = + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# If the GENERATE_QHP tag is set to YES and both QHP_NAMESPACE and QHP_VIRTUAL_FOLDER +# are set, an additional index file will be generated that can be used as input for +# Qt's qhelpgenerator to generate a Qt Compressed Help (.qch) of the generated +# HTML documentation. + +GENERATE_QHP = NO + +# If the QHG_LOCATION tag is specified, the QCH_FILE tag can +# be used to specify the file name of the resulting .qch file. +# The path specified is relative to the HTML output folder. + +QCH_FILE = + +# The QHP_NAMESPACE tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#namespace + +QHP_NAMESPACE = + +# The QHP_VIRTUAL_FOLDER tag specifies the namespace to use when generating +# Qt Help Project output. For more information please see +# http://doc.trolltech.com/qthelpproject.html#virtual-folders + +QHP_VIRTUAL_FOLDER = doc + +# If QHP_CUST_FILTER_NAME is set, it specifies the name of a custom filter to add. +# For more information please see +# http://doc.trolltech.com/qthelpproject.html#custom-filters + +QHP_CUST_FILTER_NAME = + +# The QHP_CUST_FILT_ATTRS tag specifies the list of the attributes of the custom filter to add.For more information please see +# <a href="http://doc.trolltech.com/qthelpproject.html#custom-filters">Qt Help Project / Custom Filters</a>. + +QHP_CUST_FILTER_ATTRS = + +# The QHP_SECT_FILTER_ATTRS tag specifies the list of the attributes this project's +# filter section matches. +# <a href="http://doc.trolltech.com/qthelpproject.html#filter-attributes">Qt Help Project / Filter Attributes</a>. + +QHP_SECT_FILTER_ATTRS = + +# If the GENERATE_QHP tag is set to YES, the QHG_LOCATION tag can +# be used to specify the location of Qt's qhelpgenerator. +# If non-empty doxygen will try to run qhelpgenerator on the generated +# .qhp file. + +QHG_LOCATION = + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# The GENERATE_TREEVIEW tag is used to specify whether a tree-like index +# structure should be generated to display hierarchical information. +# If the tag value is set to YES, a side panel will be generated +# containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (i.e. any modern browser). +# Windows users are probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# By enabling USE_INLINE_TREES, doxygen will generate the Groups, Directories, +# and Class Hierarchy pages using a tree view instead of an ordered list. + +USE_INLINE_TREES = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +# Use this tag to change the font size of Latex formulas included +# as images in the HTML documentation. The default is 10. Note that +# when you change the font size after a successful doxygen run you need +# to manually remove any form_*.png images from the HTML output directory +# to force them to be regenerated. + +FORMULA_FONTSIZE = 10 + +# When the SEARCHENGINE tag is enable doxygen will generate a search box for the HTML output. The underlying search engine uses javascript +# and DHTML and should work on any modern browser. Note that when using HTML help (GENERATE_HTMLHELP) or Qt help (GENERATE_QHP) +# there is already a search function so this one should typically +# be disabled. + +SEARCHENGINE = YES + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = NO + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +# If LATEX_SOURCE_CODE is set to YES then doxygen will include source code with syntax highlighting in the LaTeX output. Note that which sources are shown also depends on other settings such as SOURCE_BROWSER. + +LATEX_SOURCE_CODE = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. +# This is useful +# if you want to understand what is going on. +# On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_DEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. To prevent a macro definition from being +# undefined via #undef or recursively expanded use the := operator +# instead of the = operator. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse +# the parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base +# or super classes. Setting the tag to NO turns the diagrams off. Note that +# this option is superseded by the HAVE_DOT option below. This is only a +# fallback. It is recommended to install and use dot, since it yields more +# powerful graphs. + +CLASS_DIAGRAMS = YES + +# You can define message sequence charts within doxygen comments using the \msc +# command. Doxygen will then run the mscgen tool (see +# http://www.mcternan.me.uk/mscgen/) to produce the chart and insert it in the +# documentation. The MSCGEN_PATH tag allows you to specify the directory where +# the mscgen tool resides. If left empty the tool is assumed to be found in the +# default search path. + +MSCGEN_PATH = + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# By default doxygen will write a font called FreeSans.ttf to the output +# directory and reference it in all dot files that doxygen generates. This +# font does not include all possible unicode characters however, so when you need +# these (or just want a differently looking font) you can specify the font name +# using DOT_FONTNAME. You need need to make sure dot is able to find the font, +# which can be done by putting it in a standard location or by setting the +# DOTFONTPATH environment variable or by setting DOT_FONTPATH to the directory +# containing the font. + +DOT_FONTNAME = FreeSans + +# The DOT_FONTSIZE tag can be used to set the size of the font of dot graphs. +# The default size is 10pt. + +DOT_FONTSIZE = 10 + +# By default doxygen will tell dot to use the output directory to look for the +# FreeSans.ttf font (which doxygen will put there itself). If you specify a +# different font using DOT_FONTNAME you can set the path where dot +# can find it using this tag. + +DOT_FONTPATH = + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for groups, showing the direct groups dependencies + +GROUP_GRAPHS = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT options are set to YES then +# doxygen will generate a call dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable call graphs +# for selected functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the CALLER_GRAPH and HAVE_DOT tags are set to YES then +# doxygen will generate a caller dependency graph for every global function +# or class method. Note that enabling this option will significantly increase +# the time of a run. So in most cases it will be better to enable caller +# graphs for selected functions only using the \callergraph command. + +CALLER_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES +# then doxygen will show the dependencies a directory has on other directories +# in a graphical way. The dependency relations are determined by the #include +# relations between the files in the directories. + +DIRECTORY_GRAPH = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found in the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The DOT_GRAPH_MAX_NODES tag can be used to set the maximum number of +# nodes that will be shown in the graph. If the number of nodes in a graph +# becomes larger than this value, doxygen will truncate the graph, which is +# visualized by representing a node as a red box. Note that doxygen if the +# number of direct children of the root node in a graph is already larger than +# DOT_GRAPH_MAX_NODES then the graph will not be shown at all. Also note +# that the size of a graph can be further restricted by MAX_DOT_GRAPH_DEPTH. + +DOT_GRAPH_MAX_NODES = 50 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes +# that lay further from the root node will be omitted. Note that setting this +# option to 1 or 2 may greatly reduce the computation time needed for large +# code bases. Also note that the size of a graph can be further restricted by +# DOT_GRAPH_MAX_NODES. Using a depth of 0 means no depth restriction. + +MAX_DOT_GRAPH_DEPTH = 0 + +# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent +# background. This is disabled by default, because dot on Windows does not +# seem to support this out of the box. Warning: Depending on the platform used, +# enabling this option may lead to badly anti-aliased labels on the edges of +# a graph (i.e. they become hard to read). + +DOT_TRANSPARENT = NO + +# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output +# files in one run (i.e. multiple -o and -T options on the command line). This +# makes dot run faster, but since only newer versions of dot (>1.8.10) +# support this, this feature is disabled by default. + +DOT_MULTI_TARGETS = YES + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES diff --git a/src/3rdparty/libgq/gconf/GConfItem b/src/3rdparty/libgq/gconf/GConfItem new file mode 100644 index 0000000..0a58671 --- /dev/null +++ b/src/3rdparty/libgq/gconf/GConfItem @@ -0,0 +1 @@ +#include "gconfitem.h" diff --git a/src/3rdparty/libgq/gconf/Makefile.am b/src/3rdparty/libgq/gconf/Makefile.am new file mode 100644 index 0000000..353970d --- /dev/null +++ b/src/3rdparty/libgq/gconf/Makefile.am @@ -0,0 +1,37 @@ +AM_CXXFLAGS = $(QT_CFLAGS) $(GLIB_CFLAGS) $(GCONF_CFLAGS) +LIBS += $(QT_LIBS) $(GLIB_LIBS) $(GCONF_LIBS) + +lib_LTLIBRARIES = libgq-gconf.la + +libgq_gconf_la_SOURCES = GConfItem \ + gconfitem.h \ + gconfitem.cpp \ + gconfitem_moc.cpp + +gqincludedir=$(includedir)/gq +gqinclude_HEADERS = gconfitem.h GConfItem + +pkgconfigdir = $(libdir)/pkgconfig +pkgconfig_DATA = gq-gconf.pc + +# Tests + +check_PROGRAMS = test-gconf + +test_gconf_SOURCES = test-gconf.h test-gconf.cpp test-gconf_moc.cpp +test_gconf_CFLAGS = $(QTEST_CFLAGS) +test_gconf_LDADD = libgq-gconf.la $(QTEST_LIBS) + +TESTS = run-test-gconf + +EXTRA_DIST = run-test-gconf + +# Moccing + +%_moc.cpp: %.h + $(MOC) -o "$@" "$<" + +clean-moc: + rm -f *_moc.cpp *_moc.lo + +clean-local: clean-moc diff --git a/src/3rdparty/libgq/gconf/gconfitem.cpp b/src/3rdparty/libgq/gconf/gconfitem.cpp new file mode 100644 index 0000000..d8c565a --- /dev/null +++ b/src/3rdparty/libgq/gconf/gconfitem.cpp @@ -0,0 +1,376 @@ +/* * This file is part of libgq * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Marius Vollmer <marius.vollmer@nokia.com> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#include <QString> +#include <QStringList> +#include <QByteArray> +#include <QVariant> +#include <QtDebug> + +#include "gconfitem.h" + +#include <glib.h> +#include <gconf/gconf-value.h> +#include <gconf/gconf-client.h> + +struct GConfItemPrivate { + QString key; + QVariant value; + guint notify_id; + + static void notify_trampoline(GConfClient*, guint, GConfEntry *, gpointer); +}; + +/* We get the default client and never release it, on purpose, to + avoid disconnecting from the GConf daemon when a program happens to + not have any GConfItems for short periods of time. + */ +static GConfClient * +get_gconf_client () +{ + static bool initialized = false; + static GConfClient *client; + + if (initialized) + return client; + + g_type_init (); + client = gconf_client_get_default(); + initialized = true; + + return client; +} + +/* Sometimes I like being too clever... + */ +#define withClient(c) for (GConfClient *c = get_gconf_client (); c; c = NULL) + +static QByteArray convertKey (QString key) +{ + if (key.startsWith('/')) + return key.toUtf8(); + else + { + qWarning() << "Using dot-separated key names with GConfItem is deprecated."; + qWarning() << "Please use" << '/' + key.replace('.', '/') << "instead of" << key; + return '/' + key.replace('.', '/').toUtf8(); + } +} + +static QString convertKey(const char *key) +{ + return QString::fromUtf8(key); +} + +static QVariant convertValue(GConfValue *src) +{ + if (!src) { + return QVariant(); + } else { + switch (src->type) { + case GCONF_VALUE_INVALID: + return QVariant(QVariant::Invalid); + case GCONF_VALUE_BOOL: + return QVariant((bool)gconf_value_get_bool(src)); + case GCONF_VALUE_INT: + return QVariant(gconf_value_get_int(src)); + case GCONF_VALUE_FLOAT: + return QVariant(gconf_value_get_float(src)); + case GCONF_VALUE_STRING: + return QVariant(QString::fromUtf8(gconf_value_get_string(src))); + case GCONF_VALUE_LIST: + switch (gconf_value_get_list_type(src)) { + case GCONF_VALUE_STRING: + { + QStringList result; + for (GSList *elts = gconf_value_get_list(src); elts; elts = elts->next) + result.append(QString::fromUtf8(gconf_value_get_string((GConfValue *)elts->data))); + return QVariant(result); + } + default: + { + QList<QVariant> result; + for (GSList *elts = gconf_value_get_list(src); elts; elts = elts->next) + result.append(convertValue((GConfValue *)elts->data)); + return QVariant(result); + } + } + case GCONF_VALUE_SCHEMA: + default: + return QVariant(); + } + } +} + +static GConfValue *convertString(const QString &str) +{ + GConfValue *v = gconf_value_new (GCONF_VALUE_STRING); + gconf_value_set_string (v, str.toUtf8().data()); + return v; +} + +static GConfValueType primitiveType (const QVariant &elt) +{ + switch(elt.type()) { + case QVariant::String: + return GCONF_VALUE_STRING; + case QVariant::Int: + return GCONF_VALUE_INT; + case QVariant::Double: + return GCONF_VALUE_FLOAT; + case QVariant::Bool: + return GCONF_VALUE_BOOL; + default: + return GCONF_VALUE_INVALID; + } +} + +static GConfValueType uniformType(const QList<QVariant> &list) +{ + GConfValueType result = GCONF_VALUE_INVALID; + + foreach (const QVariant &elt, list) { + GConfValueType elt_type = primitiveType (elt); + + if (elt_type == GCONF_VALUE_INVALID) + return GCONF_VALUE_INVALID; + + if (result == GCONF_VALUE_INVALID) + result = elt_type; + else if (result != elt_type) + return GCONF_VALUE_INVALID; + } + + if (result == GCONF_VALUE_INVALID) + return GCONF_VALUE_STRING; // empty list. + else + return result; +} + +static int convertValue(const QVariant &src, GConfValue **valp) +{ + GConfValue *v; + + switch(src.type()) { + case QVariant::Invalid: + v = NULL; + break; + case QVariant::Bool: + v = gconf_value_new (GCONF_VALUE_BOOL); + gconf_value_set_bool (v, src.toBool()); + break; + case QVariant::Int: + v = gconf_value_new (GCONF_VALUE_INT); + gconf_value_set_int (v, src.toInt()); + break; + case QVariant::Double: + v = gconf_value_new (GCONF_VALUE_FLOAT); + gconf_value_set_float (v, src.toDouble()); + break; + case QVariant::String: + v = convertString(src.toString()); + break; + case QVariant::StringList: + { + GSList *elts = NULL; + v = gconf_value_new(GCONF_VALUE_LIST); + gconf_value_set_list_type(v, GCONF_VALUE_STRING); + foreach (const QString &str, src.toStringList()) + elts = g_slist_prepend(elts, convertString(str)); + gconf_value_set_list_nocopy(v, g_slist_reverse(elts)); + break; + } + case QVariant::List: + { + GConfValueType elt_type = uniformType(src.toList()); + if (elt_type == GCONF_VALUE_INVALID) + v = NULL; + else + { + GSList *elts = NULL; + v = gconf_value_new(GCONF_VALUE_LIST); + gconf_value_set_list_type(v, elt_type); + foreach (const QVariant &elt, src.toList()) + { + GConfValue *val = NULL; + convertValue(elt, &val); // guaranteed to succeed. + elts = g_slist_prepend(elts, val); + } + gconf_value_set_list_nocopy(v, g_slist_reverse(elts)); + } + break; + } + default: + return 0; + } + + *valp = v; + return 1; +} + +void GConfItemPrivate::notify_trampoline (GConfClient*, + guint, + GConfEntry *, + gpointer data) +{ + GConfItem *item = (GConfItem *)data; + item->update_value (true); +} + +void GConfItem::update_value (bool emit_signal) +{ + QVariant new_value; + + withClient(client) { + GError *error = NULL; + QByteArray k = convertKey(priv->key); + GConfValue *v = gconf_client_get(client, k.data(), &error); + + if (error) { + qWarning() << error->message; + g_error_free (error); + new_value = priv->value; + } else { + new_value = convertValue(v); + if (v) + gconf_value_free(v); + } + } + + if (new_value != priv->value) { + priv->value = new_value; + if (emit_signal) + emit valueChanged(); + } +} + +QString GConfItem::key() const +{ + return priv->key; +} + +QVariant GConfItem::value() const +{ + return priv->value; +} + +QVariant GConfItem::value(const QVariant &def) const +{ + if (priv->value.isNull()) + return def; + else + return priv->value; +} + +void GConfItem::set(const QVariant &val) +{ + withClient(client) { + QByteArray k = convertKey(priv->key); + GConfValue *v; + if (convertValue(val, &v)) { + GError *error = NULL; + + if (v) { + gconf_client_set(client, k.data(), v, &error); + gconf_value_free(v); + } else { + gconf_client_unset(client, k.data(), &error); + } + + if (error) { + qWarning() << error->message; + g_error_free(error); + } else if (priv->value != val) { + priv->value = val; + emit valueChanged(); + } + + } else + qWarning() << "Can't store a" << val.typeName(); + } +} + +void GConfItem::unset() { + set(QVariant()); +} + +QList<QString> GConfItem::listDirs() const +{ + QList<QString> children; + + withClient(client) { + QByteArray k = convertKey(priv->key); + GSList *dirs = gconf_client_all_dirs(client, k.data(), NULL); + for (GSList *d = dirs; d; d = d->next) { + children.append(convertKey((char *)d->data)); + g_free (d->data); + } + g_slist_free (dirs); + } + + return children; +} + +QList<QString> GConfItem::listEntries() const +{ + QList<QString> children; + + withClient(client) { + QByteArray k = convertKey(priv->key); + GSList *entries = gconf_client_all_entries(client, k.data(), NULL); + for (GSList *e = entries; e; e = e->next) { + children.append(convertKey(((GConfEntry *)e->data)->key)); + gconf_entry_free ((GConfEntry *)e->data); + } + g_slist_free (entries); + } + + return children; +} + +GConfItem::GConfItem(const QString &key, QObject *parent) + : QObject (parent) +{ + priv = new GConfItemPrivate; + priv->key = key; + priv->notify_id = 0; + withClient(client) { + update_value (false); + QByteArray k = convertKey(priv->key); + gconf_client_add_dir (client, k.data(), GCONF_CLIENT_PRELOAD_ONELEVEL, NULL); + priv->notify_id = gconf_client_notify_add (client, k.data(), + GConfItemPrivate::notify_trampoline, this, + NULL, NULL); + } +} + +GConfItem::~GConfItem() +{ + withClient(client) { + QByteArray k = convertKey(priv->key); + if (priv->notify_id) + gconf_client_notify_remove (client, priv->notify_id); + gconf_client_remove_dir (client, k.data(), NULL); + } + delete priv; +} diff --git a/src/3rdparty/libgq/gconf/gconfitem.h b/src/3rdparty/libgq/gconf/gconfitem.h new file mode 100644 index 0000000..17ca04e --- /dev/null +++ b/src/3rdparty/libgq/gconf/gconfitem.h @@ -0,0 +1,147 @@ +/* * This file is part of libgq * + * + * Copyright (C) 2009 Nokia Corporation. + * + * Contact: Marius Vollmer <marius.vollmer@nokia.com> + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + * + */ + +#ifndef GCONFITEM_H +#define GCONFITEM_H + +#include <QVariant> +#include <QStringList> +#include <QObject> + +/*! + + \brief GConfItem is a simple C++ wrapper for GConf. + + Creating a GConfItem instance gives you access to a single GConf + key. You can get and set its value, and connect to its + valueChanged() signal to be notified about changes. + + The value of a GConf key is returned to you as a QVariant, and you + pass in a QVariant when setting the value. GConfItem converts + between a QVariant and GConf values as needed, and according to the + following rules: + + - A QVariant of type QVariant::Invalid denotes an unset GConf key. + + - QVariant::Int, QVariant::Double, QVariant::Bool are converted to + and from the obvious equivalents. + + - QVariant::String is converted to/from a GConf string and always + uses the UTF-8 encoding. No other encoding is supported. + + - QVariant::StringList is converted to a list of UTF-8 strings. + + - QVariant::List (which denotes a QList<QVariant>) is converted + to/from a GConf list. All elements of such a list must have the + same type, and that type must be one of QVariant::Int, + QVariant::Double, QVariant::Bool, or QVariant::String. (A list of + strings is returned as a QVariant::StringList, however, when you + get it back.) + + - Any other QVariant or GConf value is essentially ignored. + + \warning GConfItem is as thread-safe as GConf. + +*/ + +class GConfItem : public QObject +{ + Q_OBJECT + + public: + /*! Initializes a GConfItem to access the GConf key denoted by + \a key. Key names should follow the normal GConf conventions + like "/myapp/settings/first". + + \param key The name of the key. + \param parent Parent object + */ + explicit GConfItem(const QString &key, QObject *parent = 0); + + /*! Finalizes a GConfItem. + */ + virtual ~GConfItem(); + + /*! Returns the key of this item, as given to the constructor. + */ + QString key() const; + + /*! Returns the current value of this item, as a QVariant. + */ + QVariant value() const; + + /*! Returns the current value of this item, as a QVariant. If + * there is no value for this item, return \a def instead. + */ + QVariant value(const QVariant &def) const; + + /*! Set the value of this item to \a val. If \a val can not be + represented in GConf or GConf refuses to accept it for other + reasons, the current value is not changed and nothing happens. + + When the new value is different from the old value, the + changedValue() signal is emitted on this GConfItem as part + of calling set(), but other GConfItem:s for the same key do + only receive a notification once the main loop runs. + + \param val The new value. + */ + void set(const QVariant &val); + + /*! Unset this item. This is equivalent to + + \code + item.set(QVariant(QVariant::Invalid)); + \endcode + */ + void unset(); + + /*! Return a list of the directories below this item. The + returned strings are absolute key names like + "/myapp/settings". + + A directory is a key that has children. The same key might + also have a value, but that is confusing and best avoided. + */ + QList<QString> listDirs() const; + + /*! Return a list of entries below this item. The returned + strings are absolute key names like "/myapp/settings/first". + + A entry is a key that has a value. The same key might also + have children, but that is confusing and is best avoided. + */ + QList<QString> listEntries() const; + + signals: + /*! Emitted when the value of this item has changed. + */ + void valueChanged(); + + private: + friend struct GConfItemPrivate; + struct GConfItemPrivate *priv; + + void update_value(bool emit_signal); +}; + +#endif // GCONFITEM_H diff --git a/src/3rdparty/libgq/gconf/gq-gconf.pc.in b/src/3rdparty/libgq/gconf/gq-gconf.pc.in new file mode 100644 index 0000000..bd76d65 --- /dev/null +++ b/src/3rdparty/libgq/gconf/gq-gconf.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: gq-gconf +Description: Qt/GConf wrapper +Version: @VERSION@ +Requires: QtCore +Libs: -L${libdir} -lgq-gconf +Cflags: -I${includedir}/gq diff --git a/src/3rdparty/libgq/gconf/run-test-gconf b/src/3rdparty/libgq/gconf/run-test-gconf new file mode 100755 index 0000000..67f9090 --- /dev/null +++ b/src/3rdparty/libgq/gconf/run-test-gconf @@ -0,0 +1,49 @@ +#!/bin/sh + +# please make sure that the en_US.UTF-8 locale is available! +# - apt-get install locales +# - make sure /etc/locale.gen contains the line "en_US.UTF-8 UTF-8" +# - run /usr/sbin/locale-gen +LC_ALL=en_US.UTF-8 +export LC_ALL + +gconftool-2 -s -t bool /Test/Bool true +VALUE=$(gconftool-2 -g /Test/Bool) +if [ "$VALUE" != "true" ]; then + echo "GConf is not running, skipping all tests" + exit 77 +fi + +# Setup values expected by the external_values() test. + +gconftool-2 -s -t int /Test/Int 123 +gconftool-2 -s -t string /Test/String "Hello GConf" +gconftool-2 -s -t float /Test/Double 3.5 +gconftool-2 -s -t list --list-type string /Test/StringList "[Hello,GConf,ÄÖÜ]" +gconftool-2 -s -t list --list-type int /Test/IntList "[1,2,3,4]" +gconftool-2 -s -t list --list-type float /Test/DoubleList "[3.5,3.5,3.5]" +gconftool-2 -s -t list --list-type bool /Test/BoolList "[false,true,true,false]" +gconftool-2 -u /Test/UnsetBefore +gconftool-2 -s -t int /Test/UnsetAfter 100 +gconftool-2 -s -t int /Test/Dir/Entry 200 + +./test-gconf $* || exit 1 + +# Check what set_external() has left behind. + +compare() { + if [ "$1" != "$2" ]; then + echo "FAIL: '$1' != '$2'" + exit 1 + fi +} + +compare "`gconftool-2 -g /Test/Bool`" false +compare "`gconftool-2 -g /Test/Int`" 54321 +compare "`gconftool-2 -g /Test/String`" "Good bye GConf" +compare "`gconftool-2 -g /Test/Double`" -2.5 +compare "`gconftool-2 -g /Test/StringList`" "[Good,bye,GConf,äöü]" +compare "`gconftool-2 -g /Test/IntList`" "[5,4,3,2,1]" +compare "`gconftool-2 -g /Test/DoubleList`" "[-2.5,-2.5]" +compare "`gconftool-2 -g /Test/BoolList`" "[false,false,true,true]" +compare "`gconftool-2 -g /Test/UnsetAfter 2>&1`" 'No value set for `/Test/UnsetAfter'"'" diff --git a/src/3rdparty/libgq/gconf/test-gconf.cpp b/src/3rdparty/libgq/gconf/test-gconf.cpp new file mode 100644 index 0000000..52eb281 --- /dev/null +++ b/src/3rdparty/libgq/gconf/test-gconf.cpp @@ -0,0 +1,299 @@ +#include "test-gconf.h" + +#define MYLOGLEVEL 2 +void myMessageOutput(QtMsgType type, const char *msg) +{ + switch (type) { + case QtDebugMsg: + if (MYLOGLEVEL <= 0) + fprintf(stderr, "Debug: %s\n", msg); + break; + case QtWarningMsg: + if (MYLOGLEVEL <= 1) + fprintf(stderr, "Warning: %s\n", msg); + break; + case QtCriticalMsg: + if (MYLOGLEVEL <= 2) + fprintf(stderr, "Critical: %s\n", msg); + break; + case QtFatalMsg: + if (MYLOGLEVEL <= 3) + fprintf(stderr, "Fatal: %s\n", msg); + abort(); + } +} + +// +// Definition of testcases: Normal tests +// + +void GConfItemTests::timeout() +{ + timed_out = true; + timer.stop(); +} + +// Before all tests +void GConfItemTests::initTestCase() +{ + connect(&timer, SIGNAL(timeout()), + this, SLOT(timeout())); +} + +// After all tests +void GConfItemTests::cleanupTestCase() +{ +} + +// Before each test +void GConfItemTests::init() +{ + boolItem = new GConfItem("/Test/Bool"); + intItem = new GConfItem("/Test/Int"); + stringItem = new GConfItem("/Test/String"); + doubleItem = new GConfItem("/Test/Double"); + stringListItem = new GConfItem("/Test/StringList"); + intListItem = new GConfItem("/Test/IntList"); + doubleListItem = new GConfItem("/Test/DoubleList"); + boolListItem = new GConfItem("/Test/BoolList"); + unsetBeforeItem = new GConfItem("/Test/UnsetBefore"); + unsetAfterItem = new GConfItem("/Test/UnsetAfter"); + signalSpy = new SignalListener(); + QObject::connect(boolItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(intItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(stringItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(doubleItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(stringListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(intListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(doubleListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::connect(boolListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); +} + +// After each test +void GConfItemTests::cleanup() +{ + QObject::disconnect(boolItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(intItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(stringItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(doubleItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(stringListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(intListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(doubleListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + QObject::disconnect(boolListItem, SIGNAL(valueChanged()), signalSpy, SLOT(valueChanged())); + delete signalSpy; + delete boolItem; + delete intItem; + delete stringItem; + delete doubleItem; + delete stringListItem; + delete intListItem; + delete doubleListItem; + delete boolListItem; + delete unsetBeforeItem; + delete unsetAfterItem; + + timer.stop(); +} + +void GConfItemTests::path() +{ + QCOMPARE(boolItem->key(), QString("/Test/Bool")); + QCOMPARE(intItem->key(), QString("/Test/Int")); + QCOMPARE(stringItem->key(), QString("/Test/String")); + QCOMPARE(doubleItem->key(), QString("/Test/Double")); + QCOMPARE(stringListItem->key(), QString("/Test/StringList")); + QCOMPARE(intListItem->key(), QString("/Test/IntList")); + QCOMPARE(doubleListItem->key(), QString("/Test/DoubleList")); + QCOMPARE(boolListItem->key(), QString("/Test/BoolList")); + QCOMPARE(unsetBeforeItem->key(), QString("/Test/UnsetBefore")); + QCOMPARE(unsetAfterItem->key(), QString("/Test/UnsetAfter")); +} + +void GConfItemTests::external_values() +{ + // These values are set before this program starts. + QCOMPARE(boolItem->value().toBool(), true); + QCOMPARE(intItem->value().toInt(), 123); + QCOMPARE(stringItem->value().toString(), QString("Hello GConf")); + QCOMPARE(doubleItem->value().toDouble(), 3.5); + QCOMPARE(stringListItem->value().toStringList(), QStringList() << "Hello" << "GConf" << QString::fromUtf8("ÄÖÜ")); + QCOMPARE(intListItem->value().toList(), QList<QVariant>() << 1 << 2 << 3 << 4); + QCOMPARE(doubleListItem->value().toList(), QList<QVariant>() << 3.5 << 3.5 << 3.5); + QCOMPARE(boolListItem->value().toList(), QList<QVariant>() << false << true << true << false); + QCOMPARE(unsetBeforeItem->value().isValid(), false); + QCOMPARE(unsetAfterItem->value().isValid(), true); +} + +void GConfItemTests::set_bool() +{ + signalSpy->numberOfCalls = 0; + + boolItem->set(false); + QCOMPARE(boolItem->value().toBool(), false); + boolItem->set(true); + QCOMPARE(boolItem->value().toBool(), true); + + QCOMPARE(signalSpy->numberOfCalls, 2); +} + +void GConfItemTests::set_int() +{ + signalSpy->numberOfCalls = 0; + + intItem->set(12); + QCOMPARE(intItem->value().toInt(), 12); + intItem->set(-5); + QCOMPARE(intItem->value().toInt(), -5); + + QCOMPARE(signalSpy->numberOfCalls, 2); +} + +void GConfItemTests::set_string() +{ + signalSpy->numberOfCalls = 0; + + stringItem->set("Hi"); + QCOMPARE(stringItem->value().toString(), QString("Hi")); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::set_unicode_string() +{ + signalSpy->numberOfCalls = 0; + + stringItem->set(QString::fromUtf8("Höäü")); + QCOMPARE(stringItem->value().toString(), QString::fromUtf8("Höäü")); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::set_double() +{ + signalSpy->numberOfCalls = 0; + + doubleItem->set(1.2345); + QCOMPARE(doubleItem->value().toDouble(), 1.2345); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::set_string_list() +{ + signalSpy->numberOfCalls = 0; + + stringListItem->set(QStringList() << "one" << "two" << "three"); + QCOMPARE(stringListItem->value().toStringList(), QStringList() << "one" << "two" << "three"); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::set_int_list() +{ + signalSpy->numberOfCalls = 0; + + intListItem->set(QList<QVariant>() << 10 << 11 << 12); + QCOMPARE(intListItem->value().toList(), QList<QVariant>() << 10 << 11 << 12); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::set_double_list() +{ + signalSpy->numberOfCalls = 0; + + doubleListItem->set(QList<QVariant>() << 1.1 << 2.2 << 3.3); + QCOMPARE(doubleListItem->value().toList(), QList<QVariant>() << 1.1 << 2.2 << 3.3); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::set_bool_list() +{ + signalSpy->numberOfCalls = 0; + + boolListItem->set(QList<QVariant>() << true << true << false); + QCOMPARE(boolListItem->value().toList(), QList<QVariant>() << true << true << false); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::unset () +{ + signalSpy->numberOfCalls = 0; + + boolItem->unset(); + QCOMPARE(boolItem->value().isValid(), false); + + QCOMPARE(signalSpy->numberOfCalls, 1); +} + +void GConfItemTests::list_dirs () +{ + GConfItem test("/Test"); + QStringList dirs = test.listDirs(); + + QVERIFY (!dirs.contains("/Test/Bool")); + QVERIFY (!dirs.contains("/Test/Int")); + QVERIFY (!dirs.contains("/Test/String")); + QVERIFY (!dirs.contains("/Test/Double")); + QVERIFY (!dirs.contains("/Test/StringList")); + QVERIFY (!dirs.contains("/Test/IntList")); + QVERIFY (!dirs.contains("/Test/DoubleList")); + QVERIFY (!dirs.contains("/Test/BoolList")); + QVERIFY (!dirs.contains("/Test/UnsetBefore")); + QVERIFY (!dirs.contains("/Test/UnsetAfter")); + QVERIFY (dirs.contains("/Test/Dir")); +} + +void GConfItemTests::list_entries () +{ + GConfItem test("/Test"); + QStringList entries = test.listEntries(); + + QVERIFY (!entries.contains("/Test/Bool")); // has been unset above + QVERIFY (entries.contains("/Test/Int")); + QVERIFY (entries.contains("/Test/String")); + QVERIFY (entries.contains("/Test/Double")); + QVERIFY (entries.contains("/Test/StringList")); + QVERIFY (entries.contains("/Test/IntList")); + QVERIFY (entries.contains("/Test/DoubleList")); + QVERIFY (entries.contains("/Test/BoolList")); + QVERIFY (!entries.contains("/Test/UnsetBefore")); + QVERIFY (entries.contains("/Test/UnsetAfter")); + QVERIFY (!entries.contains("/Test/Dir")); +} + +void GConfItemTests::get_default () +{ + intItem->unset(); + QCOMPARE(intItem->value(123).toInt(), 123); + intItem->set(234); + QCOMPARE(intItem->value(123).toInt(), 234); +} + +void GConfItemTests::propagate () +{ + GConfItem secondIntItem("/Test/Int"); + secondIntItem.set(3000); + QVERIFY_TIMEOUT(2000, intItem->value() == secondIntItem.value()); + QCOMPARE(signalSpy->numberOfCalls, 2); +} + +void GConfItemTests::set_external() +{ + // This must be the last test case. The values that are set here + // are checked after this program exits. + + boolItem->set(false); + intItem->set(54321); + stringItem->set("Good bye GConf"); + doubleItem->set(-2.5); + stringListItem->set(QStringList() << "Good" << "bye" << "GConf" << QString::fromUtf8("äöü")); + intListItem->set(QList<QVariant>() << 5 << 4 << 3 << 2 << 1); + doubleListItem->set(QList<QVariant>() << -2.5 << -2.5); + boolListItem->set(QList<QVariant>() << false << false << true << true); + unsetAfterItem->set(QVariant()); +} + +QTEST_MAIN(GConfItemTests); diff --git a/src/3rdparty/libgq/gconf/test-gconf.h b/src/3rdparty/libgq/gconf/test-gconf.h new file mode 100644 index 0000000..36eaecc --- /dev/null +++ b/src/3rdparty/libgq/gconf/test-gconf.h @@ -0,0 +1,86 @@ +#include <QObject> +#include <QtTest/QtTest> +#include <QDebug> + +#include "GConfItem" + +// Helper class for listening to signals +class SignalListener : public QObject +{ + Q_OBJECT +public: + int numberOfCalls; + SignalListener() : numberOfCalls(0) { + } + +public slots: + void valueChanged() + { + numberOfCalls++; + } +}; + +// Tests for the public API +class GConfItemTests : public QObject +{ + Q_OBJECT + + // Stored pointers etc. +private: + GConfItem *boolItem; + GConfItem *intItem; + GConfItem *stringItem; + GConfItem *doubleItem; + GConfItem *stringListItem; + GConfItem *intListItem; + GConfItem *doubleListItem; + GConfItem *boolListItem; + GConfItem *unsetBeforeItem; + GConfItem *unsetAfterItem; + + SignalListener *signalSpy; + + QTimer timer; + bool timed_out; + + // Tests +private slots: + // Init and cleanup helper functions + void initTestCase(); + void cleanupTestCase(); + void init(); + void cleanup(); + void timeout (); + + // Public API + void path(); + void external_values(); + void set_bool(); + void set_int(); + void set_string(); + void set_unicode_string(); + void set_double(); + void set_string_list(); + void set_int_list(); + void set_double_list(); + void set_bool_list(); + void unset(); + void get_default(); + void list_dirs(); + void list_entries(); + void propagate(); + void set_external(); +}; + +// Useful if you need to process some events until a condition becomes +// true. + +#define QVERIFY_TIMEOUT(msecs, expr) \ + do { \ + timed_out = false; \ + timer.start(msecs); \ + while (!timed_out && !(expr)) { \ + QCoreApplication::processEvents(QEventLoop::WaitForMoreEvents); \ + } \ + QVERIFY((expr)); \ + } while(0) |