diff options
Diffstat (limited to 'src/corelib/tools/qeasingcurve.cpp')
| -rw-r--r-- | src/corelib/tools/qeasingcurve.cpp | 844 |
1 files changed, 844 insertions, 0 deletions
diff --git a/src/corelib/tools/qeasingcurve.cpp b/src/corelib/tools/qeasingcurve.cpp new file mode 100644 index 0000000..a1a0d1f --- /dev/null +++ b/src/corelib/tools/qeasingcurve.cpp @@ -0,0 +1,844 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the QtCore module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/* + +| *property* | *Used for type* | +| period | QEasingCurve::{In,Out,InOut,OutIn}Elastic | +| amplitude | QEasingCurve::{In,Out,InOut,OutIn}Bounce, QEasingCurve::{In,Out,InOut,OutIn}Elastic | +| overshoot | QEasingCurve::{In,Out,InOut,OutIn}Back | + +*/ + + + + +/*! + \class QEasingCurve + \ingroup animation + \brief The QEasingCurve class provides easing curves for controlling animation. + + Easing curves describe a function that controls how the speed of the interpolation + between 0 and 1 should be. Easing curves allow transitions from + one value to another to appear more natural than a simple constant speed would allow. + The QEasingCurve class is usually used in conjunction with the QAnimation class, + but can be used on its own. + + To calculate the speed of the interpolation, the easing curve provides the function + valueForProgress(), where the \a progress argument specifies the progress of the + interpolation: 0 is the start value of the interpolation, 1 is the end value of the + interpolation. The returned value is the effective progress of the interpolation. + If the returned value is the same as the input value for all input values the easing + curve is a linear curve. This is the default behaviour. + + For example, + \code + QEasingCurve easing(QEasingCurve::InOutQuad); + + for(qreal t = 0.0; t < 1.0; t+=0.1) + qWarning() << "Effective progress" << t << " is + << easing.valueForProgress(t); + \endcode + will print the effective progress of the interpolation between 0 and 1. + + When using a QAnimation, the easing curve will be used to control the + progress of the interpolation between startValue and endValue: + \code + QAnimation animation; + animation.setStartValue(0); + animation.setEndValue(1000); + animation.setDuration(1000); + animation.setEasingCurve(QEasingCurve::InOutQuad); + \endcode + */ + +/*! + \enum QEasingCurve::Type + + The type of easing curve. + + \value Linear \inlineimage qeasingcurve-linear.png + \br + Easing equation function for a simple linear tweening, + with no easing. + \value InQuad \inlineimage qeasingcurve-inquad.png + \br + Easing equation function for a quadratic (t^2) easing + in: accelerating from zero velocity. + \value OutQuad \inlineimage qeasingcurve-outquad.png + \br + Easing equation function for a quadratic (t^2) easing + out: decelerating to zero velocity. + \value InOutQuad \inlineimage qeasingcurve-inoutquad.png + \br + Easing equation function for a quadratic (t^2) easing + in/out: acceleration until halfway, then deceleration. + \value OutInQuad \inlineimage qeasingcurve-outinquad.png + \br + Easing equation function for a quadratic (t^2) easing + out/in: deceleration until halfway, then acceleration. + \value InCubic \inlineimage qeasingcurve-incubic.png + \br + Easing equation function for a cubic (t^3) easing + in: accelerating from zero velocity. + \value OutCubic \inlineimage qeasingcurve-outcubic.png + \br + Easing equation function for a cubic (t^3) easing + out: decelerating from zero velocity. + \value InOutCubic \inlineimage qeasingcurve-inoutcubic.png + \br + Easing equation function for a cubic (t^3) easing + in/out: acceleration until halfway, then deceleration. + \value OutInCubic \inlineimage qeasingcurve-outincubic.png + \br + Easing equation function for a cubic (t^3) easing + out/in: deceleration until halfway, then acceleration. + \value InQuart \inlineimage qeasingcurve-inquart.png + \br + Easing equation function for a quartic (t^4) easing + in: accelerating from zero velocity. + \value OutQuart \inlineimage qeasingcurve-outquart.png + \br + Easing equation function for a quartic (t^4) easing + out: decelerating from zero velocity. + \value InOutQuart \inlineimage qeasingcurve-inoutquart.png + \br + Easing equation function for a quartic (t^4) easing + in/out: acceleration until halfway, then deceleration. + \value OutInQuart \inlineimage qeasingcurve-outinquart.png + \br + Easing equation function for a quartic (t^4) easing + out/in: deceleration until halfway, then acceleration. + \value InQuint \inlineimage qeasingcurve-inquint.png + \br + Easing equation function for a quintic (t^5) easing + in: accelerating from zero velocity. + \value OutQuint \inlineimage qeasingcurve-outquint.png + \br + Easing equation function for a quintic (t^5) easing + out: decelerating from zero velocity. + \value InOutQuint \inlineimage qeasingcurve-inoutquint.png + \br + Easing equation function for a quintic (t^5) easing + in/out: acceleration until halfway, then deceleration. + \value OutInQuint \inlineimage qeasingcurve-outinquint.png + \br + Easing equation function for a quintic (t^5) easing + out/in: deceleration until halfway, then acceleration. + \value InSine \inlineimage qeasingcurve-insine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + in: accelerating from zero velocity. + \value OutSine \inlineimage qeasingcurve-outsine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + out: decelerating from zero velocity. + \value InOutSine \inlineimage qeasingcurve-inoutsine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + in/out: acceleration until halfway, then deceleration. + \value OutInSine \inlineimage qeasingcurve-outinsine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + out/in: deceleration until halfway, then acceleration. + \value InExpo \inlineimage qeasingcurve-inexpo.png + \br + Easing equation function for an exponential (2^t) easing + in: accelerating from zero velocity. + \value OutExpo \inlineimage qeasingcurve-outexpo.png + \br + Easing equation function for an exponential (2^t) easing + out: decelerating from zero velocity. + \value InOutExpo \inlineimage qeasingcurve-inoutexpo.png + \br + Easing equation function for an exponential (2^t) easing + in/out: acceleration until halfway, then deceleration. + \value OutInExpo \inlineimage qeasingcurve-outinexpo.png + \br + Easing equation function for an exponential (2^t) easing + out/in: deceleration until halfway, then acceleration. + \value InCirc \inlineimage qeasingcurve-incirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + in: accelerating from zero velocity. + \value OutCirc \inlineimage qeasingcurve-outcirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + out: decelerating from zero velocity. + \value InOutCirc \inlineimage qeasingcurve-inoutcirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + in/out: acceleration until halfway, then deceleration. + \value OutInCirc \inlineimage qeasingcurve-outincirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + out/in: deceleration until halfway, then acceleration. + \value InElastic \inlineimage qeasingcurve-inelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing in: + accelerating from zero velocity. The peak amplitude + can be set with the \e amplitude parameter, and the + period of decay by the \e period parameter. + \value OutElastic \inlineimage qeasingcurve-outelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing out: + decelerating from zero velocity. The peak amplitude + can be set with the \e amplitude parameter, and the + period of decay by the \e period parameter. + \value InOutElastic \inlineimage qeasingcurve-inoutelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing in/out: + acceleration until halfway, then deceleration. + \value OutInElastic \inlineimage qeasingcurve-outinelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing out/in: + deceleration until halfway, then acceleration. + \value InBack \inlineimage qeasingcurve-inback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing in: + accelerating from zero velocity. + \value OutBack \inlineimage qeasingcurve-outback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing out: + decelerating from zero velocity. + \value InOutBack \inlineimage qeasingcurve-inoutback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing in/out: + acceleration until halfway, then deceleration. + \value OutInBack \inlineimage qeasingcurve-outinback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing out/in: + deceleration until halfway, then acceleration. + \value InBounce \inlineimage qeasingcurve-inbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing in: accelerating + from zero velocity. + \value OutBounce \inlineimage qeasingcurve-outbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing out: decelerating + from zero velocity. + \value InOutBounce \inlineimage qeasingcurve-inoutbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing in/out: + acceleration until halfway, then deceleration. + \value OutInBounce \inlineimage qeasingcurve-outinbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing out/in: + deceleration until halfway, then acceleration. + \omitvalue InCurve + \omitvalue OutCurve + \omitvalue SineCurve + \omitvalue CosineCurve + \value Custom This is returned if the user have specified a custom curve type with setCustomType(). Note that you cannot call setType() with this value, but type() can return it. + \omitvalue NCurveTypes +*/ + +/*! + \typedef QEasingCurve::EasingFunction + + This is a typedef for a pointer to a function with the following + signature: + + \snippet doc/src/snippets/code/src_corelib_tools_qeasingcurve.cpp 0 + +*/ + +#include "qeasingcurve.h" + +QT_BEGIN_NAMESPACE + +static bool isConfigFunction(QEasingCurve::Type type) +{ + return type >= QEasingCurve::InElastic + && type <= QEasingCurve::OutInBounce; +} + +class QEasingCurveFunction +{ +public: + enum Type { In, Out, InOut, OutIn }; + + QEasingCurveFunction(QEasingCurveFunction::Type type = In, qreal period = 0.3, qreal amplitude = 1.0, + qreal overshoot = 1.70158f) + : _t(type), _p(period), _a(amplitude), _o(overshoot) + { } + virtual ~QEasingCurveFunction() {} + virtual qreal value(qreal t); + virtual QEasingCurveFunction *copy() const; + bool operator==(const QEasingCurveFunction& other); + + Type _t; + qreal _p; + qreal _a; + qreal _o; +}; + +qreal QEasingCurveFunction::value(qreal t) +{ + return t; +} + +QEasingCurveFunction *QEasingCurveFunction::copy() const +{ + return new QEasingCurveFunction(_t, _p, _a, _o); +} + +bool QEasingCurveFunction::operator==(const QEasingCurveFunction& other) +{ + return _t == other._t && + _p == other._p && + _a == other._a && + _o == other._o; +} + +#ifdef QT_EXPERIMENTAL_SOLUTION +# include "easing.cpp" +#else +# include "../3rdparty/easing/easing.cpp" +#endif + +class QEasingCurvePrivate +{ +public: + QEasingCurvePrivate() + : type(QEasingCurve::Linear), + config(0), + func(&easeNone) + { } + void setType_helper(QEasingCurve::Type); + + QEasingCurve::Type type; + QEasingCurveFunction *config; + QEasingCurve::EasingFunction func; +}; + +struct ElasticEase : public QEasingCurveFunction +{ + ElasticEase(Type type) + : QEasingCurveFunction(type, qreal(0.3), qreal(1.0)) + { } + + QEasingCurveFunction *copy() const + { + ElasticEase *rv = new ElasticEase(_t); + rv->_p = _p; + rv->_a = _a; + return rv; + } + + qreal value(qreal t) + { + qreal p = (_p < 0) ? 0.3f : _p; + qreal a = (_a < 0) ? 1.0f : _a; + switch(_t) { + case In: + return easeInElastic(t, a, p); + case Out: + return easeOutElastic(t, a, p); + case InOut: + return easeInOutElastic(t, a, p); + case OutIn: + return easeOutInElastic(t, a, p); + default: + return t; + } + } +}; + +struct BounceEase : public QEasingCurveFunction +{ + BounceEase(Type type) + : QEasingCurveFunction(type, 0.3f, 1.0f) + { } + + QEasingCurveFunction *copy() const + { + BounceEase *rv = new BounceEase(_t); + rv->_a = _a; + return rv; + } + + qreal value(qreal t) + { + qreal a = (_a < 0) ? 1.0f : _a; + switch(_t) { + case In: + return easeInBounce(t, a); + case Out: + return easeOutBounce(t, a); + case InOut: + return easeInOutBounce(t, a); + case OutIn: + return easeOutInBounce(t, a); + default: + return t; + } + } +}; + +struct BackEase : public QEasingCurveFunction +{ + BackEase(Type type) + : QEasingCurveFunction(type, 0.3f, 1.0f, 1.70158f) + { } + + QEasingCurveFunction *copy() const + { + BackEase *rv = new BackEase(_t); + rv->_o = _o; + return rv; + } + + qreal value(qreal t) + { + qreal o = (_o < 0) ? 1.70158f : _o; + switch(_t) { + case In: + return easeInBack(t, o); + case Out: + return easeOutBack(t, o); + case InOut: + return easeInOutBack(t, o); + case OutIn: + return easeOutInBack(t, o); + default: + return t; + } + } +}; + +static QEasingCurve::EasingFunction curveToFunc(QEasingCurve::Type curve) +{ + switch(curve) { + case QEasingCurve::Linear: + return &easeNone; + case QEasingCurve::InQuad: + return &easeInQuad; + case QEasingCurve::OutQuad: + return &easeOutQuad; + case QEasingCurve::InOutQuad: + return &easeInOutQuad; + case QEasingCurve::OutInQuad: + return &easeOutInQuad; + case QEasingCurve::InCubic: + return &easeInCubic; + case QEasingCurve::OutCubic: + return &easeOutCubic; + case QEasingCurve::InOutCubic: + return &easeInOutCubic; + case QEasingCurve::OutInCubic: + return &easeOutInCubic; + case QEasingCurve::InQuart: + return &easeInQuart; + case QEasingCurve::OutQuart: + return &easeOutQuart; + case QEasingCurve::InOutQuart: + return &easeInOutQuart; + case QEasingCurve::OutInQuart: + return &easeOutInQuart; + case QEasingCurve::InQuint: + return &easeInQuint; + case QEasingCurve::OutQuint: + return &easeOutQuint; + case QEasingCurve::InOutQuint: + return &easeInOutQuint; + case QEasingCurve::OutInQuint: + return &easeOutInQuint; + case QEasingCurve::InSine: + return &easeInSine; + case QEasingCurve::OutSine: + return &easeOutSine; + case QEasingCurve::InOutSine: + return &easeInOutSine; + case QEasingCurve::OutInSine: + return &easeOutInSine; + case QEasingCurve::InExpo: + return &easeInExpo; + case QEasingCurve::OutExpo: + return &easeOutExpo; + case QEasingCurve::InOutExpo: + return &easeInOutExpo; + case QEasingCurve::OutInExpo: + return &easeOutInExpo; + case QEasingCurve::InCirc: + return &easeInCirc; + case QEasingCurve::OutCirc: + return &easeOutCirc; + case QEasingCurve::InOutCirc: + return &easeInOutCirc; + case QEasingCurve::OutInCirc: + return &easeOutInCirc; + // Internal for, compatibility with QTimeLine only ?? + case QEasingCurve::InCurve: + return &easeInCurve; + case QEasingCurve::OutCurve: + return &easeOutCurve; + case QEasingCurve::SineCurve: + return &easeSineCurve; + case QEasingCurve::CosineCurve: + return &easeCosineCurve; + default: + return 0; + }; +} + +static QEasingCurveFunction *curveToFunctionObject(QEasingCurve::Type type) +{ + QEasingCurveFunction *curveFunc = 0; + switch(type) { + case QEasingCurve::InElastic: + curveFunc = new ElasticEase(ElasticEase::In); + break; + case QEasingCurve::OutElastic: + curveFunc = new ElasticEase(ElasticEase::Out); + break; + case QEasingCurve::InOutElastic: + curveFunc = new ElasticEase(ElasticEase::InOut); + break; + case QEasingCurve::OutInElastic: + curveFunc = new ElasticEase(ElasticEase::OutIn); + break; + case QEasingCurve::OutBounce: + curveFunc = new BounceEase(BounceEase::Out); + break; + case QEasingCurve::InBounce: + curveFunc = new BounceEase(BounceEase::In); + break; + case QEasingCurve::OutInBounce: + curveFunc = new BounceEase(BounceEase::OutIn); + break; + case QEasingCurve::InOutBounce: + curveFunc = new BounceEase(BounceEase::InOut); + break; + case QEasingCurve::InBack: + curveFunc = new BackEase(BackEase::In); + break; + case QEasingCurve::OutBack: + curveFunc = new BackEase(BackEase::Out); + break; + case QEasingCurve::InOutBack: + curveFunc = new BackEase(BackEase::InOut); + break; + case QEasingCurve::OutInBack: + curveFunc = new BackEase(BackEase::OutIn); + break; + default: + curveFunc = new QEasingCurveFunction(QEasingCurveFunction::In, 0.3f, 1.0f, 1.70158f); // ### + } + + return curveFunc; +} + +/*! + Constructs an easing curve of the given \a type. + */ +QEasingCurve::QEasingCurve(Type type) + : d_ptr(new QEasingCurvePrivate) +{ + setType(type); +} + +/*! + Construct a copy of \a other. + */ +QEasingCurve::QEasingCurve(const QEasingCurve &other) +: d_ptr(new QEasingCurvePrivate) +{ + // ### non-atomic, requires malloc on shallow copy + *d_ptr = *other.d_ptr; + if(other.d_ptr->config) + d_ptr->config = other.d_ptr->config->copy(); +} + +/*! + Destructor. + */ + +QEasingCurve::~QEasingCurve() +{ + delete d_ptr; +} + +/*! + Copy \a other. + */ +QEasingCurve &QEasingCurve::operator=(const QEasingCurve &other) +{ + // ### non-atomic, requires malloc on shallow copy + if (d_ptr->config) { + delete d_ptr->config; + d_ptr->config = 0; + } + + *d_ptr = *other.d_ptr; + if(other.d_ptr->config) + d_ptr->config = other.d_ptr->config->copy(); + + return *this; +} + +/*! + Compare this easing curve with \a other and returns true if they are + equal. It will also compare the properties of a curve. + */ +bool QEasingCurve::operator==(const QEasingCurve &other) const +{ + bool res = d_ptr->func == other.d_ptr->func + && d_ptr->type == other.d_ptr->type; + if (res && d_ptr->config && other.d_ptr->config) { + // catch the config content + res = d_ptr->config->operator==(*(other.d_ptr->config)); + } + return res; +} + +/*! + \fn bool QEasingCurve::operator!=(const QEasingCurve &other) const + Compare this easing curve with \a other and returns true if they are not equal. + It will also compare the properties of a curve. + + \sa operator==() +*/ + +/*! + Returns the amplitude. This is not applicable for all curve types. + It is only applicable for bounce and elastic curves (curves of type() + QEasingCurve::InBounce, QEasingCurve::OutBounce, QEasingCurve::InOutBounce, + QEasingCurve::OutInBounce, QEasingCurve::InElastic, QEasingCurve::OutElastic, + QEasingCurve::InOutElastic or QEasingCurve::OutInElastic). + */ +qreal QEasingCurve::amplitude() const +{ + return d_ptr->config ? d_ptr->config->_a : 1.0; +} + +/*! + Sets the amplitude to \a amplitude. + + This will set the amplitude of the bounce or the amplitude of the + elastic "spring" effect. The higher the number, the higher the amplitude. + \sa amplitude() +*/ +void QEasingCurve::setAmplitude(qreal amplitude) +{ + if (!d_ptr->config) + d_ptr->config = curveToFunctionObject(d_ptr->type); + d_ptr->config->_a = amplitude; +} + +/*! + Returns the period. This is not applicable for all curve types. + It is only applicable if type() is QEasingCurve::InElastic, QEasingCurve::OutElastic, + QEasingCurve::InOutElastic or QEasingCurve::OutInElastic. + */ +qreal QEasingCurve::period() const +{ + return d_ptr->config ? d_ptr->config->_p : 0.3; +} + +/*! + Sets the period to \a period. + Setting a small period value will give a high frequency of the curve. A + large period will give it a small frequency. + + \sa period() +*/ +void QEasingCurve::setPeriod(qreal period) +{ + if (!d_ptr->config) + d_ptr->config = curveToFunctionObject(d_ptr->type); + d_ptr->config->_p = period; +} + +/*! + Returns the overshoot. This is not applicable for all curve types. + It is only applicable if type() is QEasingCurve::InBack, QEasingCurve::OutBack, + QEasingCurve::InOutBack or QEasingCurve::OutInBack. + */ +qreal QEasingCurve::overshoot() const +{ + return d_ptr->config ? d_ptr->config->_o : 1.70158f; +} + +/*! + Sets the overshoot to \a overshoot. + + 0 produces no overshoot, and the default value of 1.70158 produces an overshoot of 10 percent. + + \sa overshoot() +*/ +void QEasingCurve::setOvershoot(qreal overshoot) +{ + if (!d_ptr->config) + d_ptr->config = curveToFunctionObject(d_ptr->type); + d_ptr->config->_o = overshoot; +} + +/*! + Returns the type of the easing curve. +*/ +QEasingCurve::Type QEasingCurve::type() const +{ + return d_ptr->type; +} + +void QEasingCurvePrivate::setType_helper(QEasingCurve::Type newType) +{ + qreal amp = -1.0; + qreal period = -1.0; + qreal overshoot = -1.0; + + if (config) { + amp = config->_a; + period = config->_p; + overshoot = config->_o; + delete config; + config = 0; + } + + if (isConfigFunction(newType) || (amp != -1.0) || (period != -1.0) || (overshoot != -1.0)) { + config = curveToFunctionObject(newType); + if (amp != -1.0) + config->_a = amp; + if (period != -1.0) + config->_p = period; + if (overshoot != -1.0) + config->_o = overshoot; + func = 0; + } else if (newType != QEasingCurve::Custom) { + func = curveToFunc(newType); + } + Q_ASSERT((func == 0) == (config != 0)); + type = newType; +} + +/*! + Sets the type of the easing curve to \a type. +*/ +void QEasingCurve::setType(Type type) +{ + if (d_ptr->type == type) + return; + if (type < Linear || type >= NCurveTypes - 1) { + qWarning("QEasingCurve: Invalid curve type %d", type); + return; + } + + d_ptr->setType_helper(type); +} + +/*! + Sets a custom easing curve that is defined by the user in the function \a func. + The signature of the function is qreal myEasingFunction(qreal progress), + where \e progress and the return value is considered to be normalized between 0 and 1. + (In some cases the return value can be outside that range) + After calling this function type() will return QEasingCurve::Custom. + \a func cannot be zero. + + \sa customType() + \sa valueForProgress() +*/ +void QEasingCurve::setCustomType(EasingFunction func) +{ + if (!func) { + qWarning("Function pointer must not be null"); + return; + } + d_ptr->func = func; + d_ptr->setType_helper(Custom); +} + +/*! + Returns the function pointer to the custom easing curve. + If type() does not return QEasingCurve::Custom, this function + will return 0. +*/ +QEasingCurve::EasingFunction QEasingCurve::customType() const +{ + return d_ptr->type == Custom ? d_ptr->func : 0; +} + +/*! + Return the effective progress for the easing curve at \a progress. + While \a progress must be between 0 and 1, the returned effective progress + can be outside those bounds. For instance, QEasingCurve::InBack will + return negative values in the beginning of the function. + */ +qreal QEasingCurve::valueForProgress(qreal progress) const +{ + progress = qBound<qreal>(0, progress, 1); + if (d_ptr->func) + return d_ptr->func(progress); + else if (d_ptr->config) + return d_ptr->config->value(progress); + else + return progress; +} + +#ifndef QT_NO_DEBUG_STREAM +#include <QtCore/qdebug.h> +#include <QtCore/QString> +QDebug operator<<(QDebug debug, const QEasingCurve &item) +{ + debug << "type:" << item.d_ptr->type + << "func:" << item.d_ptr->func; + if (item.d_ptr->config) { + debug << QString::fromAscii("period:%1").arg(item.d_ptr->config->_p, 0, 'f', 20) + << QString::fromAscii("amp:%1").arg(item.d_ptr->config->_a, 0, 'f', 20) + << QString::fromAscii("overshoot:%1").arg(item.d_ptr->config->_o, 0, 'f', 20); + } + return debug; +} +#endif + +QT_END_NAMESPACE |