diff options
Diffstat (limited to 'src/corelib/tools')
| -rw-r--r-- | src/corelib/tools/qeasingcurve.cpp | 846 | ||||
| -rw-r--r-- | src/corelib/tools/qeasingcurve.h | 114 | ||||
| -rw-r--r-- | src/corelib/tools/qstring.cpp | 78 | ||||
| -rw-r--r-- | src/corelib/tools/qtimeline.cpp | 114 | ||||
| -rw-r--r-- | src/corelib/tools/qtimeline.h | 5 | ||||
| -rw-r--r-- | src/corelib/tools/tools.pri | 2 |
6 files changed, 1100 insertions, 59 deletions
diff --git a/src/corelib/tools/qeasingcurve.cpp b/src/corelib/tools/qeasingcurve.cpp new file mode 100644 index 0000000..2b027fc --- /dev/null +++ b/src/corelib/tools/qeasingcurve.cpp @@ -0,0 +1,846 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the QtCore module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/* + +| *property* | *Used for type* | +| period | QEasingCurve::{In,Out,InOut,OutIn}Elastic | +| amplitude | QEasingCurve::{In,Out,InOut,OutIn}Bounce, QEasingCurve::{In,Out,InOut,OutIn}Elastic | +| overshoot | QEasingCurve::{In,Out,InOut,OutIn}Back | + +*/ + + + + +/*! + \class QEasingCurve + \since 4.6 + \ingroup animation + \brief The QEasingCurve class provides easing curves for controlling animation. + + Easing curves describe a function that controls how the speed of the interpolation + between 0 and 1 should be. Easing curves allow transitions from + one value to another to appear more natural than a simple constant speed would allow. + The QEasingCurve class is usually used in conjunction with the QAnimation class, + but can be used on its own. + + To calculate the speed of the interpolation, the easing curve provides the function + valueForProgress(), where the \a progress argument specifies the progress of the + interpolation: 0 is the start value of the interpolation, 1 is the end value of the + interpolation. The returned value is the effective progress of the interpolation. + If the returned value is the same as the input value for all input values the easing + curve is a linear curve. This is the default behaviour. + + For example, + \code + QEasingCurve easing(QEasingCurve::InOutQuad); + + for(qreal t = 0.0; t < 1.0; t+=0.1) + qWarning() << "Effective progress" << t << " is + << easing.valueForProgress(t); + \endcode + will print the effective progress of the interpolation between 0 and 1. + + When using a QAnimation, the easing curve will be used to control the + progress of the interpolation between startValue and endValue: + \code + QAnimation animation; + animation.setStartValue(0); + animation.setEndValue(1000); + animation.setDuration(1000); + animation.setEasingCurve(QEasingCurve::InOutQuad); + \endcode + */ + +/*! + \enum QEasingCurve::Type + + The type of easing curve. + + \value Linear \inlineimage qeasingcurve-linear.png + \br + Easing equation function for a simple linear tweening, + with no easing. + \value InQuad \inlineimage qeasingcurve-inquad.png + \br + Easing equation function for a quadratic (t^2) easing + in: accelerating from zero velocity. + \value OutQuad \inlineimage qeasingcurve-outquad.png + \br + Easing equation function for a quadratic (t^2) easing + out: decelerating to zero velocity. + \value InOutQuad \inlineimage qeasingcurve-inoutquad.png + \br + Easing equation function for a quadratic (t^2) easing + in/out: acceleration until halfway, then deceleration. + \value OutInQuad \inlineimage qeasingcurve-outinquad.png + \br + Easing equation function for a quadratic (t^2) easing + out/in: deceleration until halfway, then acceleration. + \value InCubic \inlineimage qeasingcurve-incubic.png + \br + Easing equation function for a cubic (t^3) easing + in: accelerating from zero velocity. + \value OutCubic \inlineimage qeasingcurve-outcubic.png + \br + Easing equation function for a cubic (t^3) easing + out: decelerating from zero velocity. + \value InOutCubic \inlineimage qeasingcurve-inoutcubic.png + \br + Easing equation function for a cubic (t^3) easing + in/out: acceleration until halfway, then deceleration. + \value OutInCubic \inlineimage qeasingcurve-outincubic.png + \br + Easing equation function for a cubic (t^3) easing + out/in: deceleration until halfway, then acceleration. + \value InQuart \inlineimage qeasingcurve-inquart.png + \br + Easing equation function for a quartic (t^4) easing + in: accelerating from zero velocity. + \value OutQuart \inlineimage qeasingcurve-outquart.png + \br + Easing equation function for a quartic (t^4) easing + out: decelerating from zero velocity. + \value InOutQuart \inlineimage qeasingcurve-inoutquart.png + \br + Easing equation function for a quartic (t^4) easing + in/out: acceleration until halfway, then deceleration. + \value OutInQuart \inlineimage qeasingcurve-outinquart.png + \br + Easing equation function for a quartic (t^4) easing + out/in: deceleration until halfway, then acceleration. + \value InQuint \inlineimage qeasingcurve-inquint.png + \br + Easing equation function for a quintic (t^5) easing + in: accelerating from zero velocity. + \value OutQuint \inlineimage qeasingcurve-outquint.png + \br + Easing equation function for a quintic (t^5) easing + out: decelerating from zero velocity. + \value InOutQuint \inlineimage qeasingcurve-inoutquint.png + \br + Easing equation function for a quintic (t^5) easing + in/out: acceleration until halfway, then deceleration. + \value OutInQuint \inlineimage qeasingcurve-outinquint.png + \br + Easing equation function for a quintic (t^5) easing + out/in: deceleration until halfway, then acceleration. + \value InSine \inlineimage qeasingcurve-insine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + in: accelerating from zero velocity. + \value OutSine \inlineimage qeasingcurve-outsine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + out: decelerating from zero velocity. + \value InOutSine \inlineimage qeasingcurve-inoutsine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + in/out: acceleration until halfway, then deceleration. + \value OutInSine \inlineimage qeasingcurve-outinsine.png + \br + Easing equation function for a sinusoidal (sin(t)) easing + out/in: deceleration until halfway, then acceleration. + \value InExpo \inlineimage qeasingcurve-inexpo.png + \br + Easing equation function for an exponential (2^t) easing + in: accelerating from zero velocity. + \value OutExpo \inlineimage qeasingcurve-outexpo.png + \br + Easing equation function for an exponential (2^t) easing + out: decelerating from zero velocity. + \value InOutExpo \inlineimage qeasingcurve-inoutexpo.png + \br + Easing equation function for an exponential (2^t) easing + in/out: acceleration until halfway, then deceleration. + \value OutInExpo \inlineimage qeasingcurve-outinexpo.png + \br + Easing equation function for an exponential (2^t) easing + out/in: deceleration until halfway, then acceleration. + \value InCirc \inlineimage qeasingcurve-incirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + in: accelerating from zero velocity. + \value OutCirc \inlineimage qeasingcurve-outcirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + out: decelerating from zero velocity. + \value InOutCirc \inlineimage qeasingcurve-inoutcirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + in/out: acceleration until halfway, then deceleration. + \value OutInCirc \inlineimage qeasingcurve-outincirc.png + \br + Easing equation function for a circular (sqrt(1-t^2)) easing + out/in: deceleration until halfway, then acceleration. + \value InElastic \inlineimage qeasingcurve-inelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing in: + accelerating from zero velocity. The peak amplitude + can be set with the \e amplitude parameter, and the + period of decay by the \e period parameter. + \value OutElastic \inlineimage qeasingcurve-outelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing out: + decelerating from zero velocity. The peak amplitude + can be set with the \e amplitude parameter, and the + period of decay by the \e period parameter. + \value InOutElastic \inlineimage qeasingcurve-inoutelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing in/out: + acceleration until halfway, then deceleration. + \value OutInElastic \inlineimage qeasingcurve-outinelastic.png + \br + Easing equation function for an elastic + (exponentially decaying sine wave) easing out/in: + deceleration until halfway, then acceleration. + \value InBack \inlineimage qeasingcurve-inback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing in: + accelerating from zero velocity. + \value OutBack \inlineimage qeasingcurve-outback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing out: + decelerating from zero velocity. + \value InOutBack \inlineimage qeasingcurve-inoutback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing in/out: + acceleration until halfway, then deceleration. + \value OutInBack \inlineimage qeasingcurve-outinback.png + \br + Easing equation function for a back (overshooting + cubic easing: (s+1)*t^3 - s*t^2) easing out/in: + deceleration until halfway, then acceleration. + \value InBounce \inlineimage qeasingcurve-inbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing in: accelerating + from zero velocity. + \value OutBounce \inlineimage qeasingcurve-outbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing out: decelerating + from zero velocity. + \value InOutBounce \inlineimage qeasingcurve-inoutbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing in/out: + acceleration until halfway, then deceleration. + \value OutInBounce \inlineimage qeasingcurve-outinbounce.png + \br + Easing equation function for a bounce (exponentially + decaying parabolic bounce) easing out/in: + deceleration until halfway, then acceleration. + \omitvalue InCurve + \omitvalue OutCurve + \omitvalue SineCurve + \omitvalue CosineCurve + \value Custom This is returned if the user have specified a custom curve type with setCustomType(). Note that you cannot call setType() with this value, but type() can return it. + \omitvalue NCurveTypes +*/ + +/*! + \typedef QEasingCurve::EasingFunction + + This is a typedef for a pointer to a function with the following + signature: + + \snippet doc/src/snippets/code/src_corelib_tools_qeasingcurve.cpp 0 +*/ + +#include "qeasingcurve.h" + +#ifndef QT_NO_DEBUG_STREAM +#include <QtCore/qdebug.h> +#include <QtCore/QString> +#endif + +QT_BEGIN_NAMESPACE + +static bool isConfigFunction(QEasingCurve::Type type) +{ + return type >= QEasingCurve::InElastic + && type <= QEasingCurve::OutInBounce; +} + +class QEasingCurveFunction +{ +public: + enum Type { In, Out, InOut, OutIn }; + + QEasingCurveFunction(QEasingCurveFunction::Type type = In, qreal period = 0.3, qreal amplitude = 1.0, + qreal overshoot = 1.70158f) + : _t(type), _p(period), _a(amplitude), _o(overshoot) + { } + virtual ~QEasingCurveFunction() {} + virtual qreal value(qreal t); + virtual QEasingCurveFunction *copy() const; + bool operator==(const QEasingCurveFunction& other); + + Type _t; + qreal _p; + qreal _a; + qreal _o; +}; + +qreal QEasingCurveFunction::value(qreal t) +{ + return t; +} + +QEasingCurveFunction *QEasingCurveFunction::copy() const +{ + return new QEasingCurveFunction(_t, _p, _a, _o); +} + +bool QEasingCurveFunction::operator==(const QEasingCurveFunction& other) +{ + return _t == other._t && + _p == other._p && + _a == other._a && + _o == other._o; +} + +QT_BEGIN_INCLUDE_NAMESPACE +#include "../../3rdparty/easing/easing.cpp" +QT_END_INCLUDE_NAMESPACE + +class QEasingCurvePrivate +{ +public: + QEasingCurvePrivate() + : type(QEasingCurve::Linear), + config(0), + func(&easeNone) + { } + ~QEasingCurvePrivate() { delete config; } + void setType_helper(QEasingCurve::Type); + + QEasingCurve::Type type; + QEasingCurveFunction *config; + QEasingCurve::EasingFunction func; +}; + +struct ElasticEase : public QEasingCurveFunction +{ + ElasticEase(Type type) + : QEasingCurveFunction(type, qreal(0.3), qreal(1.0)) + { } + + QEasingCurveFunction *copy() const + { + ElasticEase *rv = new ElasticEase(_t); + rv->_p = _p; + rv->_a = _a; + return rv; + } + + qreal value(qreal t) + { + qreal p = (_p < 0) ? 0.3f : _p; + qreal a = (_a < 0) ? 1.0f : _a; + switch(_t) { + case In: + return easeInElastic(t, a, p); + case Out: + return easeOutElastic(t, a, p); + case InOut: + return easeInOutElastic(t, a, p); + case OutIn: + return easeOutInElastic(t, a, p); + default: + return t; + } + } +}; + +struct BounceEase : public QEasingCurveFunction +{ + BounceEase(Type type) + : QEasingCurveFunction(type, 0.3f, 1.0f) + { } + + QEasingCurveFunction *copy() const + { + BounceEase *rv = new BounceEase(_t); + rv->_a = _a; + return rv; + } + + qreal value(qreal t) + { + qreal a = (_a < 0) ? 1.0f : _a; + switch(_t) { + case In: + return easeInBounce(t, a); + case Out: + return easeOutBounce(t, a); + case InOut: + return easeInOutBounce(t, a); + case OutIn: + return easeOutInBounce(t, a); + default: + return t; + } + } +}; + +struct BackEase : public QEasingCurveFunction +{ + BackEase(Type type) + : QEasingCurveFunction(type, 0.3f, 1.0f, 1.70158f) + { } + + QEasingCurveFunction *copy() const + { + BackEase *rv = new BackEase(_t); + rv->_o = _o; + return rv; + } + + qreal value(qreal t) + { + qreal o = (_o < 0) ? 1.70158f : _o; + switch(_t) { + case In: + return easeInBack(t, o); + case Out: + return easeOutBack(t, o); + case InOut: + return easeInOutBack(t, o); + case OutIn: + return easeOutInBack(t, o); + default: + return t; + } + } +}; + +static QEasingCurve::EasingFunction curveToFunc(QEasingCurve::Type curve) +{ + switch(curve) { + case QEasingCurve::Linear: + return &easeNone; + case QEasingCurve::InQuad: + return &easeInQuad; + case QEasingCurve::OutQuad: + return &easeOutQuad; + case QEasingCurve::InOutQuad: + return &easeInOutQuad; + case QEasingCurve::OutInQuad: + return &easeOutInQuad; + case QEasingCurve::InCubic: + return &easeInCubic; + case QEasingCurve::OutCubic: + return &easeOutCubic; + case QEasingCurve::InOutCubic: + return &easeInOutCubic; + case QEasingCurve::OutInCubic: + return &easeOutInCubic; + case QEasingCurve::InQuart: + return &easeInQuart; + case QEasingCurve::OutQuart: + return &easeOutQuart; + case QEasingCurve::InOutQuart: + return &easeInOutQuart; + case QEasingCurve::OutInQuart: + return &easeOutInQuart; + case QEasingCurve::InQuint: + return &easeInQuint; + case QEasingCurve::OutQuint: + return &easeOutQuint; + case QEasingCurve::InOutQuint: + return &easeInOutQuint; + case QEasingCurve::OutInQuint: + return &easeOutInQuint; + case QEasingCurve::InSine: + return &easeInSine; + case QEasingCurve::OutSine: + return &easeOutSine; + case QEasingCurve::InOutSine: + return &easeInOutSine; + case QEasingCurve::OutInSine: + return &easeOutInSine; + case QEasingCurve::InExpo: + return &easeInExpo; + case QEasingCurve::OutExpo: + return &easeOutExpo; + case QEasingCurve::InOutExpo: + return &easeInOutExpo; + case QEasingCurve::OutInExpo: + return &easeOutInExpo; + case QEasingCurve::InCirc: + return &easeInCirc; + case QEasingCurve::OutCirc: + return &easeOutCirc; + case QEasingCurve::InOutCirc: + return &easeInOutCirc; + case QEasingCurve::OutInCirc: + return &easeOutInCirc; + // Internal for, compatibility with QTimeLine only ?? + case QEasingCurve::InCurve: + return &easeInCurve; + case QEasingCurve::OutCurve: + return &easeOutCurve; + case QEasingCurve::SineCurve: + return &easeSineCurve; + case QEasingCurve::CosineCurve: + return &easeCosineCurve; + default: + return 0; + }; +} + +static QEasingCurveFunction *curveToFunctionObject(QEasingCurve::Type type) +{ + QEasingCurveFunction *curveFunc = 0; + switch(type) { + case QEasingCurve::InElastic: + curveFunc = new ElasticEase(ElasticEase::In); + break; + case QEasingCurve::OutElastic: + curveFunc = new ElasticEase(ElasticEase::Out); + break; + case QEasingCurve::InOutElastic: + curveFunc = new ElasticEase(ElasticEase::InOut); + break; + case QEasingCurve::OutInElastic: + curveFunc = new ElasticEase(ElasticEase::OutIn); + break; + case QEasingCurve::OutBounce: + curveFunc = new BounceEase(BounceEase::Out); + break; + case QEasingCurve::InBounce: + curveFunc = new BounceEase(BounceEase::In); + break; + case QEasingCurve::OutInBounce: + curveFunc = new BounceEase(BounceEase::OutIn); + break; + case QEasingCurve::InOutBounce: + curveFunc = new BounceEase(BounceEase::InOut); + break; + case QEasingCurve::InBack: + curveFunc = new BackEase(BackEase::In); + break; + case QEasingCurve::OutBack: + curveFunc = new BackEase(BackEase::Out); + break; + case QEasingCurve::InOutBack: + curveFunc = new BackEase(BackEase::InOut); + break; + case QEasingCurve::OutInBack: + curveFunc = new BackEase(BackEase::OutIn); + break; + default: + curveFunc = new QEasingCurveFunction(QEasingCurveFunction::In, 0.3f, 1.0f, 1.70158f); // ### + } + + return curveFunc; +} + +/*! + Constructs an easing curve of the given \a type. + */ +QEasingCurve::QEasingCurve(Type type) + : d_ptr(new QEasingCurvePrivate) +{ + setType(type); +} + +/*! + Construct a copy of \a other. + */ +QEasingCurve::QEasingCurve(const QEasingCurve &other) +: d_ptr(new QEasingCurvePrivate) +{ + // ### non-atomic, requires malloc on shallow copy + *d_ptr = *other.d_ptr; + if(other.d_ptr->config) + d_ptr->config = other.d_ptr->config->copy(); +} + +/*! + Destructor. + */ + +QEasingCurve::~QEasingCurve() +{ + delete d_ptr; +} + +/*! + Copy \a other. + */ +QEasingCurve &QEasingCurve::operator=(const QEasingCurve &other) +{ + // ### non-atomic, requires malloc on shallow copy + if (d_ptr->config) { + delete d_ptr->config; + d_ptr->config = 0; + } + + *d_ptr = *other.d_ptr; + if(other.d_ptr->config) + d_ptr->config = other.d_ptr->config->copy(); + + return *this; +} + +/*! + Compare this easing curve with \a other and returns true if they are + equal. It will also compare the properties of a curve. + */ +bool QEasingCurve::operator==(const QEasingCurve &other) const +{ + bool res = d_ptr->func == other.d_ptr->func + && d_ptr->type == other.d_ptr->type; + if (res && d_ptr->config && other.d_ptr->config) { + // catch the config content + res = d_ptr->config->operator==(*(other.d_ptr->config)); + } + return res; +} + +/*! + \fn bool QEasingCurve::operator!=(const QEasingCurve &other) const + Compare this easing curve with \a other and returns true if they are not equal. + It will also compare the properties of a curve. + + \sa operator==() +*/ + +/*! + Returns the amplitude. This is not applicable for all curve types. + It is only applicable for bounce and elastic curves (curves of type() + QEasingCurve::InBounce, QEasingCurve::OutBounce, QEasingCurve::InOutBounce, + QEasingCurve::OutInBounce, QEasingCurve::InElastic, QEasingCurve::OutElastic, + QEasingCurve::InOutElastic or QEasingCurve::OutInElastic). + */ +qreal QEasingCurve::amplitude() const +{ + return d_ptr->config ? d_ptr->config->_a : 1.0; +} + +/*! + Sets the amplitude to \a amplitude. + + This will set the amplitude of the bounce or the amplitude of the + elastic "spring" effect. The higher the number, the higher the amplitude. + \sa amplitude() +*/ +void QEasingCurve::setAmplitude(qreal amplitude) +{ + if (!d_ptr->config) + d_ptr->config = curveToFunctionObject(d_ptr->type); + d_ptr->config->_a = amplitude; +} + +/*! + Returns the period. This is not applicable for all curve types. + It is only applicable if type() is QEasingCurve::InElastic, QEasingCurve::OutElastic, + QEasingCurve::InOutElastic or QEasingCurve::OutInElastic. + */ +qreal QEasingCurve::period() const +{ + return d_ptr->config ? d_ptr->config->_p : 0.3; +} + +/*! + Sets the period to \a period. + Setting a small period value will give a high frequency of the curve. A + large period will give it a small frequency. + + \sa period() +*/ +void QEasingCurve::setPeriod(qreal period) +{ + if (!d_ptr->config) + d_ptr->config = curveToFunctionObject(d_ptr->type); + d_ptr->config->_p = period; +} + +/*! + Returns the overshoot. This is not applicable for all curve types. + It is only applicable if type() is QEasingCurve::InBack, QEasingCurve::OutBack, + QEasingCurve::InOutBack or QEasingCurve::OutInBack. + */ +qreal QEasingCurve::overshoot() const +{ + return d_ptr->config ? d_ptr->config->_o : 1.70158f; +} + +/*! + Sets the overshoot to \a overshoot. + + 0 produces no overshoot, and the default value of 1.70158 produces an overshoot of 10 percent. + + \sa overshoot() +*/ +void QEasingCurve::setOvershoot(qreal overshoot) +{ + if (!d_ptr->config) + d_ptr->config = curveToFunctionObject(d_ptr->type); + d_ptr->config->_o = overshoot; +} + +/*! + Returns the type of the easing curve. +*/ +QEasingCurve::Type QEasingCurve::type() const +{ + return d_ptr->type; +} + +void QEasingCurvePrivate::setType_helper(QEasingCurve::Type newType) +{ + qreal amp = -1.0; + qreal period = -1.0; + qreal overshoot = -1.0; + + if (config) { + amp = config->_a; + period = config->_p; + overshoot = config->_o; + delete config; + config = 0; + } + + if (isConfigFunction(newType) || (amp != -1.0) || (period != -1.0) || (overshoot != -1.0)) { + config = curveToFunctionObject(newType); + if (amp != -1.0) + config->_a = amp; + if (period != -1.0) + config->_p = period; + if (overshoot != -1.0) + config->_o = overshoot; + func = 0; + } else if (newType != QEasingCurve::Custom) { + func = curveToFunc(newType); + } + Q_ASSERT((func == 0) == (config != 0)); + type = newType; +} + +/*! + Sets the type of the easing curve to \a type. +*/ +void QEasingCurve::setType(Type type) +{ + if (d_ptr->type == type) + return; + if (type < Linear || type >= NCurveTypes - 1) { + qWarning("QEasingCurve: Invalid curve type %d", type); + return; + } + + d_ptr->setType_helper(type); +} + +/*! + Sets a custom easing curve that is defined by the user in the function \a func. + The signature of the function is qreal myEasingFunction(qreal progress), + where \e progress and the return value is considered to be normalized between 0 and 1. + (In some cases the return value can be outside that range) + After calling this function type() will return QEasingCurve::Custom. + \a func cannot be zero. + + \sa customType() + \sa valueForProgress() +*/ +void QEasingCurve::setCustomType(EasingFunction func) +{ + if (!func) { + qWarning("Function pointer must not be null"); + return; + } + d_ptr->func = func; + d_ptr->setType_helper(Custom); +} + +/*! + Returns the function pointer to the custom easing curve. + If type() does not return QEasingCurve::Custom, this function + will return 0. +*/ +QEasingCurve::EasingFunction QEasingCurve::customType() const +{ + return d_ptr->type == Custom ? d_ptr->func : 0; +} + +/*! + Return the effective progress for the easing curve at \a progress. + While \a progress must be between 0 and 1, the returned effective progress + can be outside those bounds. For instance, QEasingCurve::InBack will + return negative values in the beginning of the function. + */ +qreal QEasingCurve::valueForProgress(qreal progress) const +{ + progress = qBound<qreal>(0, progress, 1); + if (d_ptr->func) + return d_ptr->func(progress); + else if (d_ptr->config) + return d_ptr->config->value(progress); + else + return progress; +} + +#ifndef QT_NO_DEBUG_STREAM +QDebug operator<<(QDebug debug, const QEasingCurve &item) +{ + debug << "type:" << item.d_ptr->type + << "func:" << item.d_ptr->func; + if (item.d_ptr->config) { + debug << QString::fromAscii("period:%1").arg(item.d_ptr->config->_p, 0, 'f', 20) + << QString::fromAscii("amp:%1").arg(item.d_ptr->config->_a, 0, 'f', 20) + << QString::fromAscii("overshoot:%1").arg(item.d_ptr->config->_o, 0, 'f', 20); + } + return debug; +} +#endif + +QT_END_NAMESPACE diff --git a/src/corelib/tools/qeasingcurve.h b/src/corelib/tools/qeasingcurve.h new file mode 100644 index 0000000..a240bc0 --- /dev/null +++ b/src/corelib/tools/qeasingcurve.h @@ -0,0 +1,114 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the QtCore module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#ifndef QEASINGCURVE_H +#define QEASINGCURVE_H + +#include <QtCore/qglobal.h> +#include <QtCore/qobjectdefs.h> + +QT_BEGIN_HEADER + +QT_BEGIN_NAMESPACE + +QT_MODULE(Core) + +class QEasingCurvePrivate; +class Q_CORE_EXPORT QEasingCurve +{ + Q_GADGET + Q_ENUMS(Type) +public: + enum Type { + Linear, + InQuad, OutQuad, InOutQuad, OutInQuad, + InCubic, OutCubic, InOutCubic, OutInCubic, + InQuart, OutQuart, InOutQuart, OutInQuart, + InQuint, OutQuint, InOutQuint, OutInQuint, + InSine, OutSine, InOutSine, OutInSine, + InExpo, OutExpo, InOutExpo, OutInExpo, + InCirc, OutCirc, InOutCirc, OutInCirc, + InElastic, OutElastic, InOutElastic, OutInElastic, + InBack, OutBack, InOutBack, OutInBack, + InBounce, OutBounce, InOutBounce, OutInBounce, + InCurve, OutCurve, SineCurve, CosineCurve, + Custom, NCurveTypes + }; + + QEasingCurve(Type type = Linear); + QEasingCurve(const QEasingCurve &other); + ~QEasingCurve(); + + QEasingCurve &operator=(const QEasingCurve &other); + bool operator==(const QEasingCurve &other) const; + inline bool operator!=(const QEasingCurve &other) const + { return !(this->operator==(other)); } + + qreal amplitude() const; + void setAmplitude(qreal amplitude); + + qreal period() const; + void setPeriod(qreal period); + + qreal overshoot() const; + void setOvershoot(qreal overshoot); + + Type type() const; + void setType(Type type); + typedef qreal (*EasingFunction)(qreal progress); + void setCustomType(EasingFunction func); + EasingFunction customType() const; + + qreal valueForProgress(qreal progress) const; +private: + QEasingCurvePrivate *d_ptr; + friend Q_CORE_EXPORT QDebug operator<<(QDebug debug, const QEasingCurve &item); +}; + +#ifndef QT_NO_DEBUG_STREAM +Q_CORE_EXPORT QDebug operator<<(QDebug debug, const QEasingCurve &item); +#endif + +QT_END_NAMESPACE + +QT_END_HEADER + +#endif diff --git a/src/corelib/tools/qstring.cpp b/src/corelib/tools/qstring.cpp index c3649e3..29509c5 100644 --- a/src/corelib/tools/qstring.cpp +++ b/src/corelib/tools/qstring.cpp @@ -195,6 +195,68 @@ static int ucstrnicmp(const ushort *a, const ushort *b, int l) return ucstricmp(a, a + l, b, b + l); } +static bool qMemEquals(const quint16 *a, const quint16 *b, int length) +{ + // Benchmarking indicates that doing memcmp is much slower than + // executing the comparison ourselves. + // To make it even faster, we do a 32-bit comparison, comparing + // twice the amount of data as a normal word-by-word comparison. + // + // Benchmarking results on a 2.33 GHz Core2 Duo, with a 64-QChar + // block of data, with 4194304 iterations (per iteration): + // operation usec cpu ticks + // memcmp 330 710 + // 16-bit 79 167-171 + // 32-bit aligned 49 105-109 + // + // Testing also indicates that unaligned 32-bit loads are as + // performant as 32-bit aligned. + if (a == b || !length) + return true; + + register union { + const quint16 *w; + const quint32 *d; + quintptr value; + } sa, sb; + sa.w = a; + sb.w = b; + + // check alignment + if ((sa.value & 2) == (sb.value & 2)) { + // both addresses have the same alignment + if (sa.value & 2) { + // both addresses are not aligned to 4-bytes boundaries + // compare the first character + if (*sa.w != *sb.w) + return false; + --length; + ++sa.w; + ++sb.w; + + // now both addresses are 4-bytes aligned + } + + // both addresses are 4-bytes aligned + // do a fast 32-bit comparison + register const quint32 *e = sa.d + (length >> 1); + for ( ; sa.d != e; ++sa.d, ++sb.d) { + if (*sa.d != *sb.d) + return false; + } + + // do we have a tail? + return (length & 1) ? *sa.w == *sb.w : true; + } else { + // one of the addresses isn't 4-byte aligned but the other is + register const quint16 *e = sa.w + length; + for ( ; sa.w != e; ++sa.w, ++sb.w) { + if (*sa.w != *sb.w) + return false; + } + } + return true; +} /*! \internal @@ -1908,8 +1970,10 @@ QString &QString::replace(QChar c, const QLatin1String &after, Qt::CaseSensitivi */ bool QString::operator==(const QString &other) const { - return (size() == other.size()) && - (memcmp((char*)unicode(),(char*)other.unicode(), size()*sizeof(QChar))==0); + if (d->size != other.d->size) + return false; + + return qMemEquals(d->data, other.d->data, d->size); } /*! @@ -3136,7 +3200,7 @@ bool QString::startsWith(const QString& s, Qt::CaseSensitivity cs) const if (s.d->size > d->size) return false; if (cs == Qt::CaseSensitive) { - return memcmp((char*)d->data, (char*)s.d->data, s.d->size*sizeof(QChar)) == 0; + return qMemEquals(d->data, s.d->data, s.d->size); } else { uint last = 0; uint olast = 0; @@ -3207,7 +3271,7 @@ bool QString::endsWith(const QString& s, Qt::CaseSensitivity cs) const if (pos < 0) return false; if (cs == Qt::CaseSensitive) { - return memcmp((char*)&d->data[pos], (char*)s.d->data, s.d->size*sizeof(QChar)) == 0; + return qMemEquals(d->data + pos, s.d->data, s.d->size); } else { uint last = 0; uint olast = 0; @@ -7692,7 +7756,8 @@ QString QStringRef::toString() const { */ bool operator==(const QStringRef &s1,const QStringRef &s2) { return (s1.size() == s2.size() && - (memcmp((char*)s1.unicode(), (char*)s2.unicode(), s1.size()*sizeof(QChar))==0)); } + qMemEquals((const ushort *)s1.unicode(), (const ushort *)s2.unicode(), s1.size())); +} /*! \relates QStringRef @@ -7701,7 +7766,8 @@ bool operator==(const QStringRef &s1,const QStringRef &s2) */ bool operator==(const QString &s1,const QStringRef &s2) { return (s1.size() == s2.size() && - (memcmp((char*)s1.unicode(), (char*)s2.unicode(), s1.size()*sizeof(QChar))==0)); } + qMemEquals((const ushort *)s1.unicode(), (const ushort *)s2.unicode(), s1.size())); +} /*! \relates QStringRef diff --git a/src/corelib/tools/qtimeline.cpp b/src/corelib/tools/qtimeline.cpp index 3a03558..ee4f73c 100644 --- a/src/corelib/tools/qtimeline.cpp +++ b/src/corelib/tools/qtimeline.cpp @@ -48,20 +48,6 @@ QT_BEGIN_NAMESPACE -static const qreal pi = qreal(3.14159265359); -static const qreal halfPi = pi / qreal(2.0); - - -static inline qreal qt_sinProgress(qreal value) -{ - return qSin((value * pi) - halfPi) / 2 + qreal(0.5); -} - -static inline qreal qt_smoothBeginEndMixFactor(qreal value) -{ - return qMin(qMax(1 - value * 2 + qreal(0.3), qreal(0.0)), qreal(1.0)); -} - class QTimeLinePrivate : public QObjectPrivate { Q_DECLARE_PUBLIC(QTimeLine) @@ -70,7 +56,7 @@ public: : startTime(0), duration(1000), startFrame(0), endFrame(0), updateInterval(1000 / 25), totalLoopCount(1), currentLoopCount(0), currentTime(0), timerId(0), - direction(QTimeLine::Forward), curveShape(QTimeLine::EaseInOutCurve), + direction(QTimeLine::Forward), easingCurve(QEasingCurve::InOutSine), state(QTimeLine::NotRunning) { } @@ -88,7 +74,7 @@ public: QTime timer; QTimeLine::Direction direction; - QTimeLine::CurveShape curveShape; + QEasingCurve easingCurve; QTimeLine::State state; inline void setState(QTimeLine::State newState) { @@ -523,12 +509,68 @@ void QTimeLine::setUpdateInterval(int interval) QTimeLine::CurveShape QTimeLine::curveShape() const { Q_D(const QTimeLine); - return d->curveShape; + switch (d->easingCurve.type()) { + default: + case QEasingCurve::InOutSine: + return EaseInOutCurve; + case QEasingCurve::InCurve: + return EaseInCurve; + case QEasingCurve::OutCurve: + return EaseOutCurve; + case QEasingCurve::Linear: + return LinearCurve; + case QEasingCurve::SineCurve: + return SineCurve; + case QEasingCurve::CosineCurve: + return CosineCurve; + } + return EaseInOutCurve; } + void QTimeLine::setCurveShape(CurveShape shape) { + switch (shape) { + default: + case EaseInOutCurve: + setEasingCurve(QEasingCurve(QEasingCurve::InOutSine)); + break; + case EaseInCurve: + setEasingCurve(QEasingCurve(QEasingCurve::InCurve)); + break; + case EaseOutCurve: + setEasingCurve(QEasingCurve(QEasingCurve::OutCurve)); + break; + case LinearCurve: + setEasingCurve(QEasingCurve(QEasingCurve::Linear)); + break; + case SineCurve: + setEasingCurve(QEasingCurve(QEasingCurve::SineCurve)); + break; + case CosineCurve: + setEasingCurve(QEasingCurve(QEasingCurve::CosineCurve)); + break; + } +} + +/*! + \property QTimeLine::easingCurve + + Specifies the easing curve that the timeline will use. + If both easing curve and curveShape are set, the last set property will + override the previous one. (If valueForTime() is reimplemented it will + override both) +*/ + +QEasingCurve QTimeLine::easingCurve() const +{ + Q_D(const QTimeLine); + return d->easingCurve; +} + +void QTimeLine::setEasingCurve(const QEasingCurve& curve) +{ Q_D(QTimeLine); - d->curveShape = shape; + d->easingCurve = curve; } /*! @@ -608,42 +650,8 @@ qreal QTimeLine::valueForTime(int msec) const Q_D(const QTimeLine); msec = qMin(qMax(msec, 0), d->duration); - // Simple linear interpolation qreal value = msec / qreal(d->duration); - - switch (d->curveShape) { - case EaseInOutCurve: - value = qt_sinProgress(value); - break; - // SmoothBegin blends Smooth and Linear Interpolation. - // Progress 0 - 0.3 : Smooth only - // Progress 0.3 - ~ 0.5 : Mix of Smooth and Linear - // Progress ~ 0.5 - 1 : Linear only - case EaseInCurve: { - const qreal sinProgress = qt_sinProgress(value); - const qreal linearProgress = value; - const qreal mix = qt_smoothBeginEndMixFactor(value); - value = sinProgress * mix + linearProgress * (1 - mix); - break; - } - case EaseOutCurve: { - const qreal sinProgress = qt_sinProgress(value); - const qreal linearProgress = value; - const qreal mix = qt_smoothBeginEndMixFactor(1 - value); - value = sinProgress * mix + linearProgress * (1 - mix); - break; - } - case SineCurve: - value = (qSin(((msec * pi * 2) / d->duration) - pi/2) + 1) / 2; - break; - case CosineCurve: - value = (qCos(((msec * pi * 2) / d->duration) - pi/2) + 1) / 2; - break; - default: - break; - } - - return value; + return d->easingCurve.valueForProgress(value); } /*! diff --git a/src/corelib/tools/qtimeline.h b/src/corelib/tools/qtimeline.h index 18c3980..48c9232 100644 --- a/src/corelib/tools/qtimeline.h +++ b/src/corelib/tools/qtimeline.h @@ -42,6 +42,7 @@ #ifndef QTIMELINE_H #define QTIMELINE_H +#include <QtCore/qeasingcurve.h> #include <QtCore/qobject.h> QT_BEGIN_HEADER @@ -60,6 +61,7 @@ class Q_CORE_EXPORT QTimeLine : public QObject Q_PROPERTY(Direction direction READ direction WRITE setDirection) Q_PROPERTY(int loopCount READ loopCount WRITE setLoopCount) Q_PROPERTY(CurveShape curveShape READ curveShape WRITE setCurveShape) + Q_PROPERTY(QEasingCurve easingCurve READ easingCurve WRITE setEasingCurve) public: enum State { NotRunning, @@ -105,6 +107,9 @@ public: CurveShape curveShape() const; void setCurveShape(CurveShape shape); + QEasingCurve easingCurve() const; + void setEasingCurve(const QEasingCurve &curve); + int currentTime() const; int currentFrame() const; qreal currentValue() const; diff --git a/src/corelib/tools/tools.pri b/src/corelib/tools/tools.pri index a6fdac7..90287cb 100644 --- a/src/corelib/tools/tools.pri +++ b/src/corelib/tools/tools.pri @@ -11,6 +11,7 @@ HEADERS += \ tools/qcryptographichash.h \ tools/qdatetime.h \ tools/qdatetime_p.h \ + tools/qeasingcurve.h \ tools/qhash.h \ tools/qline.h \ tools/qlinkedlist.h \ @@ -46,6 +47,7 @@ SOURCES += \ tools/qbytearraymatcher.cpp \ tools/qcryptographichash.cpp \ tools/qdatetime.cpp \ + tools/qeasingcurve.cpp \ tools/qhash.cpp \ tools/qline.cpp \ tools/qlinkedlist.cpp \ |