diff options
Diffstat (limited to 'src/declarative')
22 files changed, 201 insertions, 184 deletions
diff --git a/src/declarative/graphicsitems/qdeclarativeflickable.cpp b/src/declarative/graphicsitems/qdeclarativeflickable.cpp index f854262..511f789 100644 --- a/src/declarative/graphicsitems/qdeclarativeflickable.cpp +++ b/src/declarative/graphicsitems/qdeclarativeflickable.cpp @@ -399,7 +399,7 @@ void QDeclarativeFlickablePrivate::updateBeginningEnd() \section1 Example Usage - \div {float-right} + \div {class="float-right"} \inlineimage flickable.gif \enddiv diff --git a/src/declarative/graphicsitems/qdeclarativeflipable.cpp b/src/declarative/graphicsitems/qdeclarativeflipable.cpp index 5fda758..d23374b 100644 --- a/src/declarative/graphicsitems/qdeclarativeflipable.cpp +++ b/src/declarative/graphicsitems/qdeclarativeflipable.cpp @@ -86,13 +86,13 @@ public: The following example shows a Flipable item that flips whenever it is clicked, rotating about the y-axis. - This flipable item has a \c flipped boolean property that is toggled - whenever the MouseArea within the flipable is clicked. When - \c flipped is true, the item changes to the "back" state; in this + This flipable item has a \c flipped boolean property that is toggled + whenever the MouseArea within the flipable is clicked. When + \c flipped is true, the item changes to the "back" state; in this state, the \c angle of the \l Rotation item is changed to 180 degrees to produce the flipping effect. When \c flipped is false, the - item reverts to the default state, in which the \c angle value is 0. - + item reverts to the default state, in which the \c angle value is 0. + \snippet doc/src/snippets/declarative/flipable/flipable.qml 0 \image flipable.gif @@ -103,8 +103,8 @@ public: its old and new values. See \l {QML States} for details on state changes and the default - state, and \l {QML Animation} for more information on how animations - work within transitions. + state, and \l {QML Animation and Transitions} for more information on how + animations work within transitions. \sa {declarative/ui-components/flipable}{Flipable example} */ diff --git a/src/declarative/graphicsitems/qdeclarativegridview.cpp b/src/declarative/graphicsitems/qdeclarativegridview.cpp index c0cbed0..546f75e 100644 --- a/src/declarative/graphicsitems/qdeclarativegridview.cpp +++ b/src/declarative/graphicsitems/qdeclarativegridview.cpp @@ -1246,7 +1246,7 @@ void QDeclarativeGridViewPrivate::flick(AxisData &data, qreal minExtent, qreal m \snippet doc/src/snippets/declarative/gridview/ContactModel.qml 0 - \div {float-right} + \div {class="float-right"} \inlineimage gridview-simple.png \enddiv @@ -1262,7 +1262,7 @@ void QDeclarativeGridViewPrivate::flick(AxisData &data, qreal minExtent, qreal m \codeline \snippet doc/src/snippets/declarative/gridview/gridview.qml classdocs simple - \div {float-right} + \div {class="float-right"} \inlineimage gridview-highlight.png \enddiv diff --git a/src/declarative/graphicsitems/qdeclarativeitem.cpp b/src/declarative/graphicsitems/qdeclarativeitem.cpp index 4af91ce..6602dda 100644 --- a/src/declarative/graphicsitems/qdeclarativeitem.cpp +++ b/src/declarative/graphicsitems/qdeclarativeitem.cpp @@ -2747,7 +2747,7 @@ QDeclarativeListProperty<QDeclarativeState> QDeclarativeItemPrivate::states() } \endqml - \sa {qdeclarativeanimation.html#transitions}{QML Transitions} + \sa {QML Animation and Transitions}{Transitions} */ @@ -3455,7 +3455,7 @@ qreal QDeclarativeItem::implicitHeight() const Setting the implicit size is useful for defining components that have a preferred size based on their content, for example: - \code + \qml // Label.qml import QtQuick 1.1 @@ -3472,7 +3472,7 @@ qreal QDeclarativeItem::implicitHeight() const anchors.verticalCenter: parent.verticalCenter } } - \endcode + \endqml \bold Note: using implicitWidth of Text or TextEdit and setting the width explicitly incurs a performance penalty as the text must be laid out twice. diff --git a/src/declarative/graphicsitems/qdeclarativemousearea.cpp b/src/declarative/graphicsitems/qdeclarativemousearea.cpp index da11b00..f5145d0 100644 --- a/src/declarative/graphicsitems/qdeclarativemousearea.cpp +++ b/src/declarative/graphicsitems/qdeclarativemousearea.cpp @@ -216,7 +216,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate() \section1 Example Usage - \div {float-right} + \div {class="float-right"} \inlineimage qml-mousearea-snippet.png \enddiv @@ -315,7 +315,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate() The \e accepted property of the MouseEvent parameter is ignored in this handler. - \sa onCanceled() + \sa onCanceled */ /*! diff --git a/src/declarative/graphicsitems/qdeclarativerectangle.cpp b/src/declarative/graphicsitems/qdeclarativerectangle.cpp index 8f59073..b3235ef 100644 --- a/src/declarative/graphicsitems/qdeclarativerectangle.cpp +++ b/src/declarative/graphicsitems/qdeclarativerectangle.cpp @@ -134,7 +134,7 @@ void QDeclarativeGradientStop::updateGradient() \section1 Example Usage - \div {float-right} + \div {class="float-right"} \inlineimage qml-gradient.png \enddiv @@ -220,7 +220,7 @@ void QDeclarativeGradient::doUpdate() \section1 Example Usage - \div {float-right} + \div {class="float-right"} \inlineimage declarative-rect.png \enddiv @@ -272,7 +272,7 @@ void QDeclarativeRectangle::doUpdate() rectangle (as documented for QRect rendering). This can cause unintended effects if \c border.width is 1 and the rectangle is \l{Item::clip}{clipped} by a parent item: - \div {float-right} + \div {class="float-right"} \inlineimage rect-border-width.png \enddiv @@ -296,7 +296,7 @@ QDeclarativePen *QDeclarativeRectangle::border() This property allows for the construction of simple vertical gradients. Other gradients may by formed by adding rotation to the rectangle. - \div {float-left} + \div {class="float-left"} \inlineimage declarative-rect_gradient.png \enddiv @@ -364,7 +364,7 @@ void QDeclarativeRectangle::setRadius(qreal radius) The default color is white. - \div {float-right} + \div {class="float-right"} \inlineimage rect-color.png \enddiv diff --git a/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp b/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp index a8082f8..97ce059 100644 --- a/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp +++ b/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp @@ -839,7 +839,8 @@ void QDeclarativeVisualDataModel::setDelegate(QDeclarativeComponent *delegate) QML only operates on list data. \c rootIndex allows the children of any node in a QAbstractItemModel to be provided by this model. - This property only affects models of type QAbstractItemModel. + This property only affects models of type QAbstractItemModel that + are hierarchical (e.g, a tree model). For example, here is a simple interactive file system browser. When a directory name is clicked, the view's \c rootIndex is set to the diff --git a/src/declarative/qml/qdeclarativecomponent.cpp b/src/declarative/qml/qdeclarativecomponent.cpp index fc393d1..c284307 100644 --- a/src/declarative/qml/qdeclarativecomponent.cpp +++ b/src/declarative/qml/qdeclarativecomponent.cpp @@ -137,7 +137,7 @@ class QByteArray; } \endcode - \sa {Using QML in C++ Applications}, {Integrating QML with existing Qt UI code} + \sa {Using QML Bindings in C++ Applications}, {Integrating QML Code with Existing Qt UI Code} */ /*! diff --git a/src/declarative/qml/qdeclarativecontext.cpp b/src/declarative/qml/qdeclarativecontext.cpp index dc6b085..7637b72 100644 --- a/src/declarative/qml/qdeclarativecontext.cpp +++ b/src/declarative/qml/qdeclarativecontext.cpp @@ -72,10 +72,10 @@ QDeclarativeContextPrivate::QDeclarativeContextPrivate() Contexts allow data to be exposed to the QML components instantiated by the QML engine. - Each QDeclarativeContext contains a set of properties, distinct from its QObject - properties, that allow data to be explicitly bound to a context by name. The - context properties are defined and updated by calling - QDeclarativeContext::setContextProperty(). The following example shows a Qt model + Each QDeclarativeContext contains a set of properties, distinct from its QObject + properties, that allow data to be explicitly bound to a context by name. The + context properties are defined and updated by calling + QDeclarativeContext::setContextProperty(). The following example shows a Qt model being bound to a context and then accessed from a QML file. \code @@ -97,8 +97,8 @@ QDeclarativeContextPrivate::QDeclarativeContextPrivate() To simplify binding and maintaining larger data sets, a context object can be set on a QDeclarativeContext. All the properties of the context object are available by name in the context, as though they were all individually added through calls - to QDeclarativeContext::setContextProperty(). Changes to the property's values are - detected through the property's notify signal. Setting a context object is both + to QDeclarativeContext::setContextProperty(). Changes to the property's values are + detected through the property's notify signal. Setting a context object is both faster and easier than manually adding and maintaing context property values. The following example has the same effect as the previous one, but it uses a context @@ -121,7 +121,7 @@ QDeclarativeContextPrivate::QDeclarativeContextPrivate() component.create(context); \endcode - All properties added explicitly by QDeclarativeContext::setContextProperty() take + All properties added explicitly by QDeclarativeContext::setContextProperty() take precedence over the context object's properties. \section2 The Context Hierarchy @@ -147,8 +147,8 @@ QDeclarativeContextPrivate::QDeclarativeContextPrivate() context2->setContextProperty("b", 15); \endcode - While QML objects instantiated in a context are not strictly owned by that - context, their bindings are. If a context is destroyed, the property bindings of + While QML objects instantiated in a context are not strictly owned by that + context, their bindings are. If a context is destroyed, the property bindings of outstanding QML objects will stop evaluating. \warning Setting the context object or adding new context properties after an object @@ -156,7 +156,7 @@ QDeclarativeContextPrivate::QDeclarativeContextPrivate() to reevaluate). Thus whenever possible you should complete "setup" of the context before using it to create any objects. - \sa {Using QML in C++ Applications} + \sa {Using QML Bindings in C++ Applications} */ /*! \internal */ @@ -223,7 +223,7 @@ QDeclarativeContext::~QDeclarativeContext() /*! Returns whether the context is valid. - To be valid, a context must have a engine, and it's contextObject(), if any, + To be valid, a context must have a engine, and it's contextObject(), if any, must not have been deleted. */ bool QDeclarativeContext::isValid() const @@ -384,7 +384,7 @@ QVariant QDeclarativeContext::contextProperty(const QString &name) const if (data->contextObject) { QObject *obj = data->contextObject; QDeclarativePropertyCache::Data local; - QDeclarativePropertyCache::Data *property = + QDeclarativePropertyCache::Data *property = QDeclarativePropertyCache::property(data->engine, obj, name, local); if (property) value = obj->metaObject()->property(property->coreIndex).read(obj); @@ -461,7 +461,7 @@ QUrl QDeclarativeContext::baseUrl() const { Q_D(const QDeclarativeContext); const QDeclarativeContextData* data = d->data; - while (data && data->url.isEmpty()) + while (data && data->url.isEmpty()) data = data->parent; if (data) @@ -515,7 +515,7 @@ QDeclarativeContextData::QDeclarativeContextData(QDeclarativeContext *ctxt) void QDeclarativeContextData::invalidate() { - while (childContexts) + while (childContexts) childContexts->invalidate(); while (componentAttached) { @@ -570,7 +570,7 @@ void QDeclarativeContextData::clearContext() void QDeclarativeContextData::destroy() { - if (linkedContext) + if (linkedContext) linkedContext->destroy(); if (engine) invalidate(); @@ -626,9 +626,9 @@ void QDeclarativeContextData::setParent(QDeclarativeContextData *p) } } -/* -Refreshes all expressions that could possibly depend on this context. Refreshing flushes all -context-tree dependent caches in the expressions, and should occur every time the context tree +/* +Refreshes all expressions that could possibly depend on this context. Refreshing flushes all +context-tree dependent caches in the expressions, and should occur every time the context tree *structure* (not values) changes. */ void QDeclarativeContextData::refreshExpressions() @@ -656,7 +656,7 @@ void QDeclarativeContextData::addObject(QObject *o) data->outerContext = this; data->nextContextObject = contextObjects; - if (data->nextContextObject) + if (data->nextContextObject) data->nextContextObject->prevContextObject = &data->nextContextObject; data->prevContextObject = &contextObjects; contextObjects = data; @@ -664,7 +664,7 @@ void QDeclarativeContextData::addObject(QObject *o) void QDeclarativeContextData::addImportedScript(const QDeclarativeParser::Object::ScriptBlock &script) { - if (!engine) + if (!engine) return; QDeclarativeEnginePrivate *enginePriv = QDeclarativeEnginePrivate::get(engine); @@ -684,7 +684,7 @@ void QDeclarativeContextData::addImportedScript(const QDeclarativeParser::Object scriptContext->pushScope(enginePriv->contextClass->newUrlContext(url)); scriptContext->pushScope(enginePriv->globalClass->staticGlobalObject()); - + QScriptValue scope = QScriptDeclarativeClass::newStaticScopeObject(scriptEngine); scriptContext->pushScope(scope); @@ -752,7 +752,7 @@ QString QDeclarativeContextData::findObjectId(const QObject *obj) const for (int i=0; i<idValueCount; i++) { if (idValues[i] == obj) return propertyNames->findId(i); - } + } if (linkedContext) return linkedContext->findObjectId(obj); @@ -761,7 +761,7 @@ QString QDeclarativeContextData::findObjectId(const QObject *obj) const QDeclarativeContext *QDeclarativeContextData::asQDeclarativeContext() { - if (!publicContext) + if (!publicContext) publicContext = new QDeclarativeContext(this); return publicContext; } diff --git a/src/declarative/qml/qdeclarativeengine.cpp b/src/declarative/qml/qdeclarativeengine.cpp index 854d910..824aeab 100644 --- a/src/declarative/qml/qdeclarativeengine.cpp +++ b/src/declarative/qml/qdeclarativeengine.cpp @@ -2117,7 +2117,7 @@ QVariant QDeclarativeEnginePrivate::scriptValueToVariant(const QScriptValue &val The newly added \a path will be first in the importPathList(). - \sa setImportPathList(), \l {QML Modules} + \sa setImportPathList(), {QML Modules} */ void QDeclarativeEngine::addImportPath(const QString& path) { diff --git a/src/declarative/qml/qdeclarativetypeloader.cpp b/src/declarative/qml/qdeclarativetypeloader.cpp index 36cdde9..26f3996 100644 --- a/src/declarative/qml/qdeclarativetypeloader.cpp +++ b/src/declarative/qml/qdeclarativetypeloader.cpp @@ -629,7 +629,18 @@ QDeclarativeTypeLoader::~QDeclarativeTypeLoader() } /*! -Return a QDeclarativeTypeData for \a url. The QDeclarativeTypeData may be cached. +\enum QDeclarativeTypeLoader::Option + +This enum defines the options that control the way type data is handled. + +\value None The default value, indicating that no other options + are enabled. +\value PreserveParser The parser used to handle the type data is preserved + after the data has been parsed. +*/ + +/*! +Returns a QDeclarativeTypeData for the specified \a url. The QDeclarativeTypeData may be cached. */ QDeclarativeTypeData *QDeclarativeTypeLoader::get(const QUrl &url) { @@ -650,8 +661,10 @@ QDeclarativeTypeData *QDeclarativeTypeLoader::get(const QUrl &url) } /*! -Return a QDeclarativeTypeData for \a data with the provided base \a url. The +Returns a QDeclarativeTypeData for the given \a data with the provided base \a url. The QDeclarativeTypeData will not be cached. + +The specified \a options control how the loader handles type data. */ QDeclarativeTypeData *QDeclarativeTypeLoader::get(const QByteArray &data, const QUrl &url, Options options) { diff --git a/src/declarative/util/qdeclarativeanimation.cpp b/src/declarative/util/qdeclarativeanimation.cpp index ac9c3c0..9b8fcad 100644 --- a/src/declarative/util/qdeclarativeanimation.cpp +++ b/src/declarative/util/qdeclarativeanimation.cpp @@ -74,7 +74,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Animation QDeclarativeAbstractAnimation - \ingroup qml-animation-transition + \ingroup qml-animation-transition \since 4.7 \brief The Animation element is the base of all QML animations. @@ -554,7 +554,7 @@ void QDeclarativeAbstractAnimation::timelineComplete() /*! \qmlclass PauseAnimation QDeclarativePauseAnimation - \ingroup qml-animation-transition + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The PauseAnimation element provides a pause for an animation. @@ -571,7 +571,7 @@ void QDeclarativeAbstractAnimation::timelineComplete() } \endcode - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativePauseAnimation::QDeclarativePauseAnimation(QObject *parent) : QDeclarativeAbstractAnimation(*(new QDeclarativePauseAnimationPrivate), parent) @@ -630,27 +630,27 @@ QAbstractAnimation *QDeclarativePauseAnimation::qtAnimation() \inherits PropertyAnimation \brief The ColorAnimation element animates changes in color values. - ColorAnimation is a specialized PropertyAnimation that defines an + ColorAnimation is a specialized PropertyAnimation that defines an animation to be applied when a color value changes. - Here is a ColorAnimation applied to the \c color property of a \l Rectangle - as a property value source. It animates the \c color property's value from + Here is a ColorAnimation applied to the \c color property of a \l Rectangle + as a property value source. It animates the \c color property's value from its current value to a value of "red", over 1000 milliseconds: \snippet doc/src/snippets/declarative/coloranimation.qml 0 Like any other animation element, a ColorAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. - - For convenience, when a ColorAnimation is used in a \l Transition, it will - animate any \c color properties that have been modified during the state - change. If a \l{PropertyAnimation::}{property} or - \l{PropertyAnimation::}{properties} are explicitly set for the animation, + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. + + For convenience, when a ColorAnimation is used in a \l Transition, it will + animate any \c color properties that have been modified during the state + change. If a \l{PropertyAnimation::}{property} or + \l{PropertyAnimation::}{properties} are explicitly set for the animation, then those are used instead. - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeColorAnimation::QDeclarativeColorAnimation(QObject *parent) : QDeclarativePropertyAnimation(parent) @@ -686,10 +686,10 @@ QDeclarativeColorAnimation::~QDeclarativeColorAnimation() If the ColorAnimation is defined within a \l Transition or \l Behavior, this value defaults to the value defined in the starting state of the - \l Transition, or the current value of the property at the moment the + \l Transition, or the current value of the property at the moment the \l Behavior is triggered. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ QColor QDeclarativeColorAnimation::from() const { @@ -712,7 +712,7 @@ void QDeclarativeColorAnimation::setFrom(const QColor &f) \l Transition, or the value of the property change that triggered the \l Behavior. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ QColor QDeclarativeColorAnimation::to() const { @@ -868,7 +868,7 @@ QAbstractAnimation *QDeclarativeScriptAction::qtAnimation() \inherits Animation \brief The PropertyAction element allows immediate property changes during animation. - PropertyAction is used to specify an immediate property change during an + PropertyAction is used to specify an immediate property change during an animation. The property change is not animated. It is useful for setting non-animated property values during an animation. @@ -879,9 +879,9 @@ QAbstractAnimation *QDeclarativeScriptAction::qtAnimation() \snippet doc/src/snippets/declarative/propertyaction.qml standalone - PropertyAction is also useful for setting the exact point at which a property - change should occur during a \l Transition. For example, if PropertyChanges - was used in a \l State to rotate an item around a particular + PropertyAction is also useful for setting the exact point at which a property + change should occur during a \l Transition. For example, if PropertyChanges + was used in a \l State to rotate an item around a particular \l {Item::}{transformOrigin}, it might be implemented like this: \snippet doc/src/snippets/declarative/propertyaction.qml transition @@ -893,13 +893,13 @@ QAbstractAnimation *QDeclarativeScriptAction::qtAnimation() before the RotationAnimation begins: \snippet doc/src/snippets/declarative/propertyaction-sequential.qml sequential - + This immediately sets the \c transformOrigin property to the value defined - in the end state of the \l Transition (i.e. the value defined in the + in the end state of the \l Transition (i.e. the value defined in the PropertyAction object) so that the rotation animation begins with the correct transform origin. - \sa {QML Animation}, QtDeclarative + \sa {QML Animation and Transitions}, QtDeclarative */ QDeclarativePropertyAction::QDeclarativePropertyAction(QObject *parent) : QDeclarativeAbstractAnimation(*(new QDeclarativePropertyActionPrivate), parent) @@ -1129,25 +1129,25 @@ void QDeclarativePropertyAction::transition(QDeclarativeStateActions &actions, \inherits PropertyAnimation \brief The NumberAnimation element animates changes in qreal-type values. - NumberAnimation is a specialized PropertyAnimation that defines an + NumberAnimation is a specialized PropertyAnimation that defines an animation to be applied when a numerical value changes. - Here is a NumberAnimation applied to the \c x property of a \l Rectangle - as a property value source. It animates the \c x value from its current + Here is a NumberAnimation applied to the \c x property of a \l Rectangle + as a property value source. It animates the \c x value from its current value to a value of 50, over 1000 milliseconds: \snippet doc/src/snippets/declarative/numberanimation.qml 0 Like any other animation element, a NumberAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. Note that NumberAnimation may not animate smoothly if there are irregular changes in the number value that it is tracking. If this is the case, use SmoothedAnimation instead. - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeNumberAnimation::QDeclarativeNumberAnimation(QObject *parent) : QDeclarativePropertyAnimation(parent) @@ -1193,10 +1193,10 @@ void QDeclarativeNumberAnimation::init() If the NumberAnimation is defined within a \l Transition or \l Behavior, this value defaults to the value defined in the starting state of the - \l Transition, or the current value of the property at the moment the + \l Transition, or the current value of the property at the moment the \l Behavior is triggered. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ qreal QDeclarativeNumberAnimation::from() const @@ -1219,7 +1219,7 @@ void QDeclarativeNumberAnimation::setFrom(qreal f) \l Transition, or the value of the property change that triggered the \l Behavior. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ qreal QDeclarativeNumberAnimation::to() const { @@ -1241,15 +1241,15 @@ void QDeclarativeNumberAnimation::setTo(qreal t) \inherits PropertyAnimation \brief The Vector3dAnimation element animates changes in QVector3d values. - Vector3dAnimation is a specialized PropertyAnimation that defines an + Vector3dAnimation is a specialized PropertyAnimation that defines an animation to be applied when a Vector3d value changes. Like any other animation element, a Vector3dAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeVector3dAnimation::QDeclarativeVector3dAnimation(QObject *parent) : QDeclarativePropertyAnimation(parent) @@ -1270,10 +1270,10 @@ QDeclarativeVector3dAnimation::~QDeclarativeVector3dAnimation() If the Vector3dAnimation is defined within a \l Transition or \l Behavior, this value defaults to the value defined in the starting state of the - \l Transition, or the current value of the property at the moment the + \l Transition, or the current value of the property at the moment the \l Behavior is triggered. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ QVector3D QDeclarativeVector3dAnimation::from() const { @@ -1295,7 +1295,7 @@ void QDeclarativeVector3dAnimation::setFrom(QVector3D f) \l Transition, or the value of the property change that triggered the \l Behavior. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ QVector3D QDeclarativeVector3dAnimation::to() const { @@ -1318,7 +1318,7 @@ void QDeclarativeVector3dAnimation::setTo(QVector3D t) \brief The RotationAnimation element animates changes in rotation values. RotationAnimation is a specialized PropertyAnimation that gives control - over the direction of rotation during an animation. + over the direction of rotation during an animation. By default, it rotates in the direction of the numerical change; a rotation from 0 to 240 will rotate 240 degrees @@ -1334,7 +1334,7 @@ void QDeclarativeVector3dAnimation::setTo(QVector3D t) Notice the RotationAnimation did not need to set a \l target value. As a convenience, when used in a transition, RotationAnimation will rotate all properties named "rotation" or "angle". You can override this by providing - your own properties via \l {PropertyAnimation::properties}{properties} or + your own properties via \l {PropertyAnimation::properties}{properties} or \l {PropertyAnimation::property}{property}. Also, note the \l Rectangle will be rotated around its default @@ -1344,11 +1344,11 @@ void QDeclarativeVector3dAnimation::setTo(QVector3D t) PropertyAction documentation for more details. Like any other animation element, a RotationAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QVariant _q_interpolateShortestRotation(qreal &f, qreal &t, qreal progress) { @@ -1421,10 +1421,10 @@ QDeclarativeRotationAnimation::~QDeclarativeRotationAnimation() If the RotationAnimation is defined within a \l Transition or \l Behavior, this value defaults to the value defined in the starting state of the - \l Transition, or the current value of the property at the moment the + \l Transition, or the current value of the property at the moment the \l Behavior is triggered. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ qreal QDeclarativeRotationAnimation::from() const { @@ -1446,7 +1446,7 @@ void QDeclarativeRotationAnimation::setFrom(qreal f) \l Transition, or the value of the property change that triggered the \l Behavior. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ qreal QDeclarativeRotationAnimation::to() const { @@ -1572,15 +1572,15 @@ QDeclarativeListProperty<QDeclarativeAbstractAnimation> QDeclarativeAnimationGro if this is the preferred behavior. Like any other animation element, a SequentialAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \note Once an animation has been grouped into a SequentialAnimation or + \note Once an animation has been grouped into a SequentialAnimation or ParallelAnimation, it cannot be individually started and stopped; the SequentialAnimation or ParallelAnimation must be started and stopped as a group. - - \sa ParallelAnimation, {QML Animation}, {declarative/animation/basics}{Animation basics example} + + \sa ParallelAnimation, {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeSequentialAnimation::QDeclarativeSequentialAnimation(QObject *parent) : @@ -1642,15 +1642,15 @@ void QDeclarativeSequentialAnimation::transition(QDeclarativeStateActions &actio \snippet doc/src/snippets/declarative/parallelanimation.qml 0 Like any other animation element, a ParallelAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \note Once an animation has been grouped into a SequentialAnimation or + \note Once an animation has been grouped into a SequentialAnimation or ParallelAnimation, it cannot be individually started and stopped; the SequentialAnimation or ParallelAnimation must be started and stopped as a group. - \sa SequentialAnimation, {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa SequentialAnimation, {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeParallelAnimation::QDeclarativeParallelAnimation(QObject *parent) : QDeclarativeAnimationGroup(parent) @@ -1745,14 +1745,14 @@ void QDeclarativePropertyAnimationPrivate::convertVariant(QVariant &variant, int \inherits Animation \brief The PropertyAnimation element animates changes in property values. - PropertyAnimation provides a way to animate changes to a property's value. + PropertyAnimation provides a way to animate changes to a property's value. It can be used to define animations in a number of ways: - + \list \o In a \l Transition - For example, to animate any objects that have changed their \c x or \c y properties + For example, to animate any objects that have changed their \c x or \c y properties as a result of a state change, using an \c InOutQuad easing curve: \snippet doc/src/snippets/declarative/propertyanimation.qml transition @@ -1792,12 +1792,12 @@ void QDeclarativePropertyAnimationPrivate::convertVariant(QVariant &variant, int Depending on how the animation is used, the set of properties normally used will be different. For more information see the individual property documentation, as well - as the \l{QML Animation} introduction. + as the \l{QML Animation and Transitions} introduction. Note that PropertyAnimation inherits the abstract \l Animation element. This includes additional properties and methods for controlling the animation. - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativePropertyAnimation::QDeclarativePropertyAnimation(QObject *parent) @@ -1857,10 +1857,10 @@ void QDeclarativePropertyAnimation::setDuration(int duration) If the PropertyAnimation is defined within a \l Transition or \l Behavior, this value defaults to the value defined in the starting state of the - \l Transition, or the current value of the property at the moment the + \l Transition, or the current value of the property at the moment the \l Behavior is triggered. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ QVariant QDeclarativePropertyAnimation::from() const { @@ -1887,7 +1887,7 @@ void QDeclarativePropertyAnimation::setFrom(const QVariant &f) \l Transition, or the value of the property change that triggered the \l Behavior. - \sa {QML Animation} + \sa {QML Animation and Transitions} */ QVariant QDeclarativePropertyAnimation::to() const { @@ -2254,7 +2254,7 @@ void QDeclarativePropertyAnimation::setProperties(const QString &prop) As seen in the above example, properties is specified as a comma-separated string of property names to animate. - \sa exclude, {QML Animation} + \sa exclude, {QML Animation and Transitions} */ QDeclarativeListProperty<QObject> QDeclarativePropertyAnimation::targets() { @@ -2437,7 +2437,7 @@ void QDeclarativePropertyAnimation::transition(QDeclarativeStateActions &actions ParentAnimation is used to animate a parent change for an \l Item. For example, the following ParentChange changes \c blueRect to become - a child of \c redRect when it is clicked. The inclusion of the + a child of \c redRect when it is clicked. The inclusion of the ParentAnimation, which defines a NumberAnimation to be applied during the transition, ensures the item animates smoothly as it moves to its new parent: @@ -2452,17 +2452,17 @@ void QDeclarativePropertyAnimation::transition(QDeclarativeStateActions &actions to animate the parent change via another item that does not have clipping enabled. Such an item can be set using the \l via property. - For convenience, when a ParentAnimation is used in a \l Transition, it will - animate any ParentChange that has occurred during the state change. + For convenience, when a ParentAnimation is used in a \l Transition, it will + animate any ParentChange that has occurred during the state change. This can be overridden by setting a specific target item using the \l target property. Like any other animation element, a ParentAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \sa {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeParentAnimation::QDeclarativeParentAnimation(QObject *parent) : QDeclarativeAnimationGroup(*(new QDeclarativeParentAnimationPrivate), parent) @@ -2793,23 +2793,23 @@ QAbstractAnimation *QDeclarativeParentAnimation::qtAnimation() \inherits Animation \brief The AnchorAnimation element animates changes in anchor values. - AnchorAnimation is used to animate an anchor change. + AnchorAnimation is used to animate an anchor change. In the following snippet we animate the addition of a right anchor to a \l Rectangle: \snippet doc/src/snippets/declarative/anchoranimation.qml 0 - For convenience, when an AnchorAnimation is used in a \l Transition, it will - animate any AnchorChanges that have occurred during the state change. + For convenience, when an AnchorAnimation is used in a \l Transition, it will + animate any AnchorChanges that have occurred during the state change. This can be overridden by setting a specific target item using the \l target property. Like any other animation element, an AnchorAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \sa {QML Animation}, AnchorChanges + \sa {QML Animation and Transitions}, AnchorChanges */ QDeclarativeAnchorAnimation::QDeclarativeAnchorAnimation(QObject *parent) diff --git a/src/declarative/util/qdeclarativebehavior.cpp b/src/declarative/util/qdeclarativebehavior.cpp index e584476..41f8fe5 100644 --- a/src/declarative/util/qdeclarativebehavior.cpp +++ b/src/declarative/util/qdeclarativebehavior.cpp @@ -76,7 +76,7 @@ public: \since 4.7 \brief The Behavior element allows you to specify a default animation for a property change. - A Behavior defines the default animation to be applied whenever a + A Behavior defines the default animation to be applied whenever a particular property value changes. For example, the following Behavior defines a NumberAnimation to be run @@ -93,7 +93,7 @@ public: Behavior, the \l Transition animation overrides the Behavior for that state change. - \sa {QML Animation}, {declarative/animation/behaviors}{Behavior example}, QtDeclarative + \sa {QML Animation and Transitions}, {declarative/animation/behaviors}{Behavior example}, QtDeclarative */ @@ -205,7 +205,7 @@ void QDeclarativeBehavior::write(const QVariant &value) d->animation->qtAnimation()->start(); d->blockRunningChanged = false; if (!after.contains(d->property)) - QDeclarativePropertyPrivate::write(d->property, value, QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding); + QDeclarativePropertyPrivate::write(d->property, value, QDeclarativePropertyPrivate::BypassInterceptor | QDeclarativePropertyPrivate::DontRemoveBinding); } void QDeclarativeBehavior::setTarget(const QDeclarativeProperty &property) diff --git a/src/declarative/util/qdeclarativeconnections.cpp b/src/declarative/util/qdeclarativeconnections.cpp index 5a66aab..83a7d83 100644 --- a/src/declarative/util/qdeclarativeconnections.cpp +++ b/src/declarative/util/qdeclarativeconnections.cpp @@ -117,6 +117,8 @@ public: id: area } // ... + \endqml + \qml Connections { target: area onClicked: foo(parameters) diff --git a/src/declarative/util/qdeclarativelistmodel.cpp b/src/declarative/util/qdeclarativelistmodel.cpp index 9332de4..b2739f0 100644 --- a/src/declarative/util/qdeclarativelistmodel.cpp +++ b/src/declarative/util/qdeclarativelistmodel.cpp @@ -108,7 +108,7 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM The following example shows a ListModel containing three elements, with the roles "name" and "cost". - \div {float-right} + \div {class="float-right"} \inlineimage listmodel.png \enddiv @@ -133,7 +133,7 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM The delegate displays all the fruit attributes: - \div {float-right} + \div {class="float-right"} \inlineimage listmodel-nested.png \enddiv @@ -143,7 +143,7 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM \section1 Modifying List Models The content of a ListModel may be created and modified using the clear(), - append(), set() and setProperty() methods. For example: + append(), set(), insert() and setProperty() methods. For example: \snippet doc/src/snippets/declarative/listmodel-modify.qml delegate diff --git a/src/declarative/util/qdeclarativepropertychanges.cpp b/src/declarative/util/qdeclarativepropertychanges.cpp index 9bcb263..b03630d 100644 --- a/src/declarative/util/qdeclarativepropertychanges.cpp +++ b/src/declarative/util/qdeclarativepropertychanges.cpp @@ -118,12 +118,13 @@ QT_BEGIN_NAMESPACE \section2 Immediate property changes in transitions - When \l Transitions are used to animate state changes, they animate - properties from their values in the current state to those defined in the - new state (as defined by PropertyChanges objects). However, - it is sometimes desirable to set a property value \e immediately during a - \l Transition, without animation; in these cases, the PropertyAction - element can be used to force an immediate property change. + When \l{QML Animation and Transitions}{Transitions} are used to animate + state changes, they animate properties from their values in the current + state to those defined in the new state (as defined by PropertyChanges + objects). However, it is sometimes desirable to set a property value + \e immediately during a \l Transition, without animation; in these cases, + the PropertyAction element can be used to force an immediate property + change. See the PropertyAction documentation for more details. diff --git a/src/declarative/util/qdeclarativesmoothedanimation.cpp b/src/declarative/util/qdeclarativesmoothedanimation.cpp index e2f6e3c..9def5b4 100644 --- a/src/declarative/util/qdeclarativesmoothedanimation.cpp +++ b/src/declarative/util/qdeclarativesmoothedanimation.cpp @@ -257,8 +257,8 @@ void QSmoothedAnimation::init() A SmoothedAnimation animates a property's value to a set target value using an ease in/out quad easing curve. When the target value changes, - the easing curves used to animate between the old and new target values - are smoothly spliced together to create a smooth movement to the new + the easing curves used to animate between the old and new target values + are smoothly spliced together to create a smooth movement to the new target value that maintains the current velocity. The follow example shows one \l Rectangle tracking the position of another @@ -288,11 +288,11 @@ void QSmoothedAnimation::init() of 0.5 will take 2000 ms to complete. Like any other animation element, a SmoothedAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \sa SpringAnimation, NumberAnimation, {QML Animation}, {declarative/animation/basics}{Animation basics example} + \sa SpringAnimation, NumberAnimation, {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example} */ QDeclarativeSmoothedAnimation::QDeclarativeSmoothedAnimation(QObject *parent) diff --git a/src/declarative/util/qdeclarativespringanimation.cpp b/src/declarative/util/qdeclarativespringanimation.cpp index 1212a1c..bb58b0a 100644 --- a/src/declarative/util/qdeclarativespringanimation.cpp +++ b/src/declarative/util/qdeclarativespringanimation.cpp @@ -246,19 +246,19 @@ void QDeclarativeSpringAnimationPrivate::updateMode() You can also limit the maximum \l velocity of the animation. - The following \l Rectangle moves to the position of the mouse using a + The following \l Rectangle moves to the position of the mouse using a SpringAnimation when the mouse is clicked. The use of the \l Behavior - on the \c x and \c y values indicates that whenever these values are + on the \c x and \c y values indicates that whenever these values are changed, a SpringAnimation should be applied. \snippet doc/src/snippets/declarative/springanimation.qml 0 Like any other animation element, a SpringAnimation can be applied in a - number of ways, including transitions, behaviors and property value - sources. The \l {QML Animation} documentation shows a variety of methods - for creating animations. + number of ways, including transitions, behaviors and property value + sources. The \l {QML Animation and Transitions} documentation shows a + variety of methods for creating animations. - \sa SmoothedAnimation, {QML Animation}, {declarative/animation/basics}{Animation basics example}, {declarative/toys/clocks}{Clocks example} + \sa SmoothedAnimation, {QML Animation and Transitions}, {declarative/animation/basics}{Animation basics example}, {declarative/toys/clocks}{Clocks example} */ QDeclarativeSpringAnimation::QDeclarativeSpringAnimation(QObject *parent) @@ -299,7 +299,7 @@ void QDeclarativeSpringAnimation::setVelocity(qreal velocity) This property describes how strongly the target is pulled towards the source. The default value is 0 (that is, the spring-like motion is disabled). - + The useful value range is 0 - 5.0. When this property is set and the \l velocity value is greater than 0, @@ -394,9 +394,9 @@ void QDeclarativeSpringAnimation::setModulus(qreal modulus) \qmlproperty real SpringAnimation::mass This property holds the "mass" of the property being moved. - The value is 1.0 by default. - - A greater mass causes slower movement and a greater spring-like + The value is 1.0 by default. + + A greater mass causes slower movement and a greater spring-like motion when an item comes to rest. */ qreal QDeclarativeSpringAnimation::mass() const diff --git a/src/declarative/util/qdeclarativestate.cpp b/src/declarative/util/qdeclarativestate.cpp index 5a4e2b1..5718e29 100644 --- a/src/declarative/util/qdeclarativestate.cpp +++ b/src/declarative/util/qdeclarativestate.cpp @@ -152,14 +152,14 @@ QDeclarativeStateOperation::QDeclarativeStateOperation(QObjectPrivate &dd, QObje Notice the default state is referred to using an empty string (""). - States are commonly used together with \l {Transitions} to provide + States are commonly used together with \l{QML Animation and Transitions}{Transitions} to provide animations when state changes occur. \note Setting the state of an object from within another state of the same object is not allowed. \sa {declarative/animation/states}{states example}, {qmlstates}{States}, - {qdeclarativeanimation.html#transitions}{QML Transitions}, QtDeclarative + {QML Animation and Transitions}{Transitions}, QtDeclarative */ QDeclarativeState::QDeclarativeState(QObject *parent) : QObject(*(new QDeclarativeStatePrivate), parent) diff --git a/src/declarative/util/qdeclarativestategroup.cpp b/src/declarative/util/qdeclarativestategroup.cpp index f1d0997..6459bf9 100644 --- a/src/declarative/util/qdeclarativestategroup.cpp +++ b/src/declarative/util/qdeclarativestategroup.cpp @@ -88,7 +88,7 @@ public: /*! \qmlclass StateGroup QDeclarativeStateGroup - \ingroup qml-state-elements + \ingroup qml-state-elements \since 4.7 \brief The StateGroup element provides state support for non-Item elements. @@ -113,7 +113,7 @@ public: } \endqml - \sa {qmlstate}{States} {Transitions}, {QtDeclarative} + \sa {qmlstate}{States} {QML Animation and Transitions}{Transitions}, {QtDeclarative} */ QDeclarativeStateGroup::QDeclarativeStateGroup(QObject *parent) @@ -213,7 +213,7 @@ void QDeclarativeStateGroupPrivate::clear_states(QDeclarativeListProperty<QDecla } \endqml - \sa {Transitions} + \sa {QML Animation and Transitions}{Transitions} */ QDeclarativeListProperty<QDeclarativeTransition> QDeclarativeStateGroup::transitionsProperty() { diff --git a/src/declarative/util/qdeclarativetransition.cpp b/src/declarative/util/qdeclarativetransition.cpp index 063ec3e..1a574b8 100644 --- a/src/declarative/util/qdeclarativetransition.cpp +++ b/src/declarative/util/qdeclarativetransition.cpp @@ -60,24 +60,24 @@ QT_BEGIN_NAMESPACE A Transition defines the animations to be applied when a \l State change occurs. For example, the following \l Rectangle has two states: the default state, and - an added "moved" state. In the "moved state, the rectangle's position changes + an added "moved" state. In the "moved state, the rectangle's position changes to (50, 50). The added Transition specifies that when the rectangle changes between the default and the "moved" state, any changes to the \c x and \c y properties should be animated, using an \c Easing.InOutQuad. \snippet doc/src/snippets/declarative/transition.qml 0 - Notice the example does not require \l{PropertyAnimation::}{to} and + Notice the example does not require \l{PropertyAnimation::}{to} and \l{PropertyAnimation::}{from} values for the NumberAnimation. As a convenience, these properties are automatically set to the values of \c x and \c y before and after the state change; the \c from values are provided by the current values of \c x and \c y, and the \c to values are provided by - the PropertyChanges object. If you wish, you can provide \l{PropertyAnimation::}{to} and + the PropertyChanges object. If you wish, you can provide \l{PropertyAnimation::}{to} and \l{PropertyAnimation::}{from} values anyway to override the default values. - By default, a Transition's animations are applied for any state change in the - parent item. The Transition \l {Transition::}{from} and \l {Transition::}{to} - values can be set to restrict the animations to only be applied when changing + By default, a Transition's animations are applied for any state change in the + parent item. The Transition \l {Transition::}{from} and \l {Transition::}{to} + values can be set to restrict the animations to only be applied when changing from one particular state to another. To define multiple transitions, specify \l Item::transitions as a list: @@ -92,7 +92,7 @@ QT_BEGIN_NAMESPACE \l Behavior, the Transition animation overrides the \l Behavior for that state change. - \sa {QML Animation}, {declarative/animation/states}{states example}, {qmlstates}{States}, {QtDeclarative} + \sa {QML Animation and Transitions}, {declarative/animation/states}{states example}, {qmlstates}{States}, {QtDeclarative} */ //ParallelAnimationWrapper allows us to do a "callback" when the animation finishes, rather than connecting @@ -111,8 +111,8 @@ class QDeclarativeTransitionPrivate : public QObjectPrivate { Q_DECLARE_PUBLIC(QDeclarativeTransition) public: - QDeclarativeTransitionPrivate() - : fromState(QLatin1String("*")), toState(QLatin1String("*")), + QDeclarativeTransitionPrivate() + : fromState(QLatin1String("*")), toState(QLatin1String("*")), reversed(false), reversible(false), endState(0) { group.trans = this; @@ -249,7 +249,7 @@ void QDeclarativeTransition::setFromState(const QString &f) is reversed, and it is not necessary to set this property to reverse the transition. - However, if a SequentialAnimation is used, or if the \l from or \l to + However, if a SequentialAnimation is used, or if the \l from or \l to properties have been set, this property will need to be set to reverse a transition when a state change is reverted. For example, the following transition applies a sequential animation when the mouse is pressed, @@ -257,7 +257,7 @@ void QDeclarativeTransition::setFromState(const QString &f) \snippet doc/src/snippets/declarative/transition-reversible.qml 0 - If the transition did not set the \c to and \c reversible values, then + If the transition did not set the \c to and \c reversible values, then on the mouse release, the transition would play the PropertyAnimation before the ColorAnimation instead of reversing the sequence. */ diff --git a/src/declarative/util/qdeclarativeview.cpp b/src/declarative/util/qdeclarativeview.cpp index 13880c2..dcc078d 100644 --- a/src/declarative/util/qdeclarativeview.cpp +++ b/src/declarative/util/qdeclarativeview.cpp @@ -194,9 +194,9 @@ void QDeclarativeViewPrivate::itemGeometryChanged(QDeclarativeItem *resizeItem, \since 4.7 \brief The QDeclarativeView class provides a widget for displaying a Qt Declarative user interface. - QDeclarativeItem objects can be placed on a standard QGraphicsScene and - displayed with QGraphicsView. QDeclarativeView is a QGraphicsView subclass - provided as a convenience for displaying QML files, and connecting between + QDeclarativeItem objects can be placed on a standard QGraphicsScene and + displayed with QGraphicsView. QDeclarativeView is a QGraphicsView subclass + provided as a convenience for displaying QML files, and connecting between QML and C++ Qt objects. QDeclarativeView provides: @@ -236,7 +236,7 @@ void QDeclarativeViewPrivate::itemGeometryChanged(QDeclarativeItem *resizeItem, If you're using your own QGraphicsScene-based scene with QDeclarativeView, remember to enable scene's sticky focus mode and to set itemIndexMethod to QGraphicsScene::NoIndex. - \sa {Integrating QML with existing Qt UI code}, {Using QML in C++ Applications} + \sa {Integrating QML Code with Existing Qt UI Code}, {Using QML Bindings in C++ Applications} */ @@ -250,7 +250,7 @@ void QDeclarativeViewPrivate::itemGeometryChanged(QDeclarativeItem *resizeItem, /*! \fn QDeclarativeView::QDeclarativeView(QWidget *parent) - + Constructs a QDeclarativeView with the given \a parent. */ QDeclarativeView::QDeclarativeView(QWidget *parent) @@ -704,7 +704,7 @@ void QDeclarativeView::paintEvent(QPaintEvent *event) QDeclarativeDebugTrace::startRange(QDeclarativeDebugTrace::Painting); int time = 0; - if (frameRateDebug()) + if (frameRateDebug()) time = d->frameTimer.restart(); #ifdef Q_WS_MAC |