diff options
Diffstat (limited to 'src/declarative')
10 files changed, 202 insertions, 88 deletions
diff --git a/src/declarative/debugger/qdeclarativedebughelper.cpp b/src/declarative/debugger/qdeclarativedebughelper.cpp index 0478209..93f7423 100644 --- a/src/declarative/debugger/qdeclarativedebughelper.cpp +++ b/src/declarative/debugger/qdeclarativedebughelper.cpp @@ -65,10 +65,12 @@ void QDeclarativeDebugHelper::setAnimationSlowDownFactor(qreal factor) } void QDeclarativeDebugHelper::enableDebugging() { +#ifndef QDECLARATIVE_NO_DEBUG_PROTOCOL if (!QDeclarativeEnginePrivate::qml_debugging_enabled) { qWarning("Qml debugging is enabled. Only use this in a safe environment!"); } QDeclarativeEnginePrivate::qml_debugging_enabled = true; +#endif } QT_END_NAMESPACE diff --git a/src/declarative/debugger/qdeclarativedebugserver.cpp b/src/declarative/debugger/qdeclarativedebugserver.cpp index 1581675..e43b90d 100644 --- a/src/declarative/debugger/qdeclarativedebugserver.cpp +++ b/src/declarative/debugger/qdeclarativedebugserver.cpp @@ -159,8 +159,8 @@ QDeclarativeDebugServer *QDeclarativeDebugServer::instance() if (!commandLineTested) { commandLineTested = true; -#ifndef QDECLARATIVE_NO_DEBUG_PROTOCOL QApplicationPrivate *appD = static_cast<QApplicationPrivate*>(QObjectPrivate::get(qApp)); +#ifndef QDECLARATIVE_NO_DEBUG_PROTOCOL // ### remove port definition when protocol is changed int port = 0; bool block = false; @@ -204,6 +204,12 @@ QDeclarativeDebugServer *QDeclarativeDebugServer::instance() appD->qmljsDebugArgumentsString()).toAscii().constData()); } } +#else + if (!appD->qmljsDebugArgumentsString().isEmpty()) { + qWarning(QString::fromAscii("QDeclarativeDebugServer: Ignoring \"-qmljsdebugger=%1\". " + "QtDeclarative is not configured for debugging.").arg( + appD->qmljsDebugArgumentsString()).toAscii().constData()); + } #endif } diff --git a/src/declarative/graphicsitems/qdeclarativeflickable.cpp b/src/declarative/graphicsitems/qdeclarativeflickable.cpp index 566d025..1d50baf 100644 --- a/src/declarative/graphicsitems/qdeclarativeflickable.cpp +++ b/src/declarative/graphicsitems/qdeclarativeflickable.cpp @@ -45,9 +45,40 @@ #include <QGraphicsSceneMouseEvent> #include <QPointer> #include <QTimer> +#include "qplatformdefs.h" QT_BEGIN_NAMESPACE +// The maximum number of pixels a flick can overshoot +#ifndef QML_FLICK_OVERSHOOT +#define QML_FLICK_OVERSHOOT 200 +#endif + +// The number of samples to use in calculating the velocity of a flick +#ifndef QML_FLICK_SAMPLEBUFFER +#define QML_FLICK_SAMPLEBUFFER 3 +#endif + +// The number of samples to discard when calculating the flick velocity. +// Touch panels often produce inaccurate results as the finger is lifted. +#ifndef QML_FLICK_DISCARDSAMPLES +#define QML_FLICK_DISCARDSAMPLES 1 +#endif + +// The default maximum velocity of a flick. +#ifndef QML_FLICK_DEFAULTMAXVELOCITY +#define QML_FLICK_DEFAULTMAXVELOCITY 2500 +#endif + +// The default deceleration of a flick. +#ifndef QML_FLICK_DEFAULTDECELERATION +#define QML_FLICK_DEFAULTDECELERATION 1750 +#endif + +// How much faster to decelerate when overshooting +#ifndef QML_FLICK_OVERSHOOTFRICTION +#define QML_FLICK_OVERSHOOTFRICTION 8 +#endif // FlickThreshold determines how far the "mouse" must have moved // before we perform a flick. @@ -141,8 +172,9 @@ QDeclarativeFlickablePrivate::QDeclarativeFlickablePrivate() , hMoved(false), vMoved(false) , movingHorizontally(false), movingVertically(false) , stealMouse(false), pressed(false), interactive(true), calcVelocity(false) - , deceleration(500), maxVelocity(2000), reportedVelocitySmoothing(100) - , delayedPressEvent(0), delayedPressTarget(0), pressDelay(0), fixupDuration(600) + , deceleration(QML_FLICK_DEFAULTDECELERATION) + , maxVelocity(QML_FLICK_DEFAULTMAXVELOCITY), reportedVelocitySmoothing(100) + , delayedPressEvent(0), delayedPressTarget(0), pressDelay(0), fixupDuration(400) , fixupMode(Normal), vTime(0), visibleArea(0) , flickableDirection(QDeclarativeFlickable::AutoFlickDirection) , boundsBehavior(QDeclarativeFlickable::DragAndOvershootBounds) @@ -176,19 +208,39 @@ void QDeclarativeFlickablePrivate::init() } /* - Returns the amount to overshoot by given a velocity. - Will be roughly in range 0 - size/4 + Returns the amount to overshoot by given a view size. + Will be up to the lesser of 1/3 of the view size or QML_FLICK_OVERSHOOT */ -qreal QDeclarativeFlickablePrivate::overShootDistance(qreal velocity, qreal size) +qreal QDeclarativeFlickablePrivate::overShootDistance(qreal size) { if (maxVelocity <= 0) return 0.0; - velocity = qAbs(velocity); - if (velocity > maxVelocity) - velocity = maxVelocity; - qreal dist = size / 4 * velocity / maxVelocity; - return dist; + return qMin(qreal(QML_FLICK_OVERSHOOT), size/3); +} + +void QDeclarativeFlickablePrivate::AxisData::addVelocitySample(qreal v, qreal maxVelocity) +{ + if (v > maxVelocity) + v = maxVelocity; + else if (v < -maxVelocity) + v = -maxVelocity; + velocityBuffer.append(v); + if (velocityBuffer.count() > QML_FLICK_SAMPLEBUFFER) + velocityBuffer.remove(0); +} + +void QDeclarativeFlickablePrivate::AxisData::updateVelocity() +{ + if (velocityBuffer.count() > QML_FLICK_DISCARDSAMPLES) { + velocity = 0; + int count = velocityBuffer.count()-QML_FLICK_DISCARDSAMPLES; + for (int i = 0; i < count; ++i) { + qreal v = velocityBuffer.at(i); + velocity += v; + } + velocity /= count; + } } void QDeclarativeFlickablePrivate::itemGeometryChanged(QDeclarativeItem *item, const QRectF &newGeom, const QRectF &oldGeom) @@ -220,15 +272,12 @@ void QDeclarativeFlickablePrivate::flick(AxisData &data, qreal minExtent, qreal Q_Q(QDeclarativeFlickable); qreal maxDistance = -1; data.fixingUp = false; - bool overShoot = boundsBehavior == QDeclarativeFlickable::DragAndOvershootBounds; // -ve velocity means list is moving up if (velocity > 0) { - if (data.move.value() < minExtent) - maxDistance = qAbs(minExtent - data.move.value() + (overShoot?overShootDistance(velocity,vSize):0)); + maxDistance = qAbs(minExtent - data.move.value()); data.flickTarget = minExtent; } else { - if (data.move.value() > maxExtent) - maxDistance = qAbs(maxExtent - data.move.value()) + (overShoot?overShootDistance(velocity,vSize):0); + maxDistance = qAbs(maxExtent - data.move.value()); data.flickTarget = maxExtent; } if (maxDistance > 0) { @@ -240,7 +289,10 @@ void QDeclarativeFlickablePrivate::flick(AxisData &data, qreal minExtent, qreal v = maxVelocity; } timeline.reset(data.move); - timeline.accel(data.move, v, deceleration, maxDistance); + if (boundsBehavior == QDeclarativeFlickable::DragAndOvershootBounds) + timeline.accel(data.move, v, deceleration); + else + timeline.accel(data.move, v, deceleration, maxDistance); timeline.callback(QDeclarativeTimeLineCallback(&data.move, fixupCallback, this)); if (!flickingHorizontally && q->xflick()) { flickingHorizontally = true; @@ -327,6 +379,7 @@ void QDeclarativeFlickablePrivate::fixup(AxisData &data, qreal minExtent, qreal } } } + data.inOvershoot = false; fixupMode = Normal; vTime = timeline.time(); } @@ -706,16 +759,13 @@ void QDeclarativeFlickablePrivate::handleMousePressEvent(QGraphicsSceneMouseEven q->setKeepMouseGrab(stealMouse); pressed = true; timeline.clear(); - hData.velocity = 0; - vData.velocity = 0; - hData.dragStartOffset = 0; - vData.dragStartOffset = 0; + hData.reset(); + vData.reset(); hData.dragMinBound = q->minXExtent(); vData.dragMinBound = q->minYExtent(); hData.dragMaxBound = q->maxXExtent(); vData.dragMaxBound = q->maxYExtent(); - hData.fixingUp = false; - vData.fixingUp = false; + fixupMode = Normal; lastPos = QPoint(); QDeclarativeItemPrivate::start(lastPosTime); pressPos = event->pos(); @@ -807,33 +857,33 @@ void QDeclarativeFlickablePrivate::handleMouseMoveEvent(QGraphicsSceneMouseEvent if (stealMouse) q->setKeepMouseGrab(true); - if (!lastPos.isNull()) { - qreal elapsed = qreal(QDeclarativeItemPrivate::restart(lastPosTime)) / 1000.; - if (elapsed <= 0) - elapsed = 1; - if (q->yflick()) { - qreal diff = event->pos().y() - lastPos.y(); - // average to reduce the effect of spurious moves - vData.velocity += diff / elapsed; - vData.velocity /= 2; - } - - if (q->xflick()) { - qreal diff = event->pos().x() - lastPos.x(); - // average to reduce the effect of spurious moves - hData.velocity += diff / elapsed; - hData.velocity /= 2; - } + if (rejectY) { + vData.velocityBuffer.clear(); + vData.velocity = 0; + } + if (rejectX) { + hData.velocityBuffer.clear(); + hData.velocity = 0; } - - if (rejectY) vData.velocity = 0; - if (rejectX) hData.velocity = 0; if (hMoved || vMoved) { q->movementStarting(); q->viewportMoved(); } + if (!lastPos.isNull()) { + qreal elapsed = qreal(QDeclarativeItemPrivate::elapsed(lastPosTime)) / 1000.; + if (elapsed <= 0) + return; + QDeclarativeItemPrivate::restart(lastPosTime); + qreal dy = event->pos().y()-lastPos.y(); + if (q->yflick() && !rejectY) + vData.addVelocitySample(dy/elapsed, maxVelocity); + qreal dx = event->pos().x()-lastPos.x(); + if (q->xflick() && !rejectX) + hData.addVelocitySample(dx/elapsed, maxVelocity); + } + lastPos = event->pos(); } @@ -846,25 +896,33 @@ void QDeclarativeFlickablePrivate::handleMouseReleaseEvent(QGraphicsSceneMouseEv if (!lastPosTime.isValid()) return; - if (QDeclarativeItemPrivate::elapsed(lastPosTime) > 100) { - // if we drag then pause before release we should not cause a flick. + // if we drag then pause before release we should not cause a flick. + if (QDeclarativeItemPrivate::elapsed(lastPosTime) < 100) { + vData.updateVelocity(); + hData.updateVelocity(); + } else { hData.velocity = 0.0; vData.velocity = 0.0; } vTime = timeline.time(); - if (qAbs(vData.velocity) > MinimumFlickVelocity && qAbs(event->pos().y() - pressPos.y()) > FlickThreshold) - flickY(vData.velocity); + + qreal velocity = vData.velocity; + if (vData.atBeginning || vData.atEnd) + velocity /= 2; + if (qAbs(velocity) > MinimumFlickVelocity && qAbs(event->pos().y() - pressPos.y()) > FlickThreshold) + flickY(velocity); else fixupY(); - if (qAbs(hData.velocity) > MinimumFlickVelocity && qAbs(event->pos().x() - pressPos.x()) > FlickThreshold) - flickX(hData.velocity); + velocity = hData.velocity; + if (hData.atBeginning || hData.atEnd) + velocity /= 2; + if (qAbs(velocity) > MinimumFlickVelocity && qAbs(event->pos().x() - pressPos.x()) > FlickThreshold) + flickX(velocity); else fixupX(); - lastPosTime.invalidate(); - if (!timeline.isActive()) q->movementEnding(); } @@ -911,29 +969,41 @@ void QDeclarativeFlickable::wheelEvent(QGraphicsSceneWheelEvent *event) if (!d->interactive) { QDeclarativeItem::wheelEvent(event); } else if (yflick() && event->orientation() == Qt::Vertical) { - if (event->delta() > 0) - d->vData.velocity = qMax(event->delta() - d->vData.smoothVelocity.value(), qreal(250.0)); - else - d->vData.velocity = qMin(event->delta() - d->vData.smoothVelocity.value(), qreal(-250.0)); - d->flickingVertically = false; - d->flickY(d->vData.velocity); - if (d->flickingVertically) { - d->vMoved = true; - movementStarting(); + bool valid = false; + if (event->delta() > 0 && contentY() > -minYExtent()) { + d->vData.velocity = qMax(event->delta()*2 - d->vData.smoothVelocity.value(), qreal(d->maxVelocity/4)); + valid = true; + } else if (event->delta() < 0 && contentY() < -maxYExtent()) { + d->vData.velocity = qMin(event->delta()*2 - d->vData.smoothVelocity.value(), qreal(-d->maxVelocity/4)); + valid = true; + } + if (valid) { + d->flickingVertically = false; + d->flickY(d->vData.velocity); + if (d->flickingVertically) { + d->vMoved = true; + movementStarting(); + } + event->accept(); } - event->accept(); } else if (xflick() && event->orientation() == Qt::Horizontal) { - if (event->delta() > 0) - d->hData.velocity = qMax(event->delta() - d->hData.smoothVelocity.value(), qreal(250.0)); - else - d->hData.velocity = qMin(event->delta() - d->hData.smoothVelocity.value(), qreal(-250.0)); - d->flickingHorizontally = false; - d->flickX(d->hData.velocity); - if (d->flickingHorizontally) { - d->hMoved = true; - movementStarting(); + bool valid = false; + if (event->delta() > 0 && contentX() > -minXExtent()) { + d->hData.velocity = qMax(event->delta()*2 - d->hData.smoothVelocity.value(), qreal(d->maxVelocity/4)); + valid = true; + } else if (event->delta() < 0 && contentX() < -maxXExtent()) { + d->hData.velocity = qMin(event->delta()*2 - d->hData.smoothVelocity.value(), qreal(-d->maxVelocity/4)); + valid = true; + } + if (valid) { + d->flickingHorizontally = false; + d->flickX(d->hData.velocity); + if (d->flickingHorizontally) { + d->hMoved = true; + movementStarting(); + } + event->accept(); } - event->accept(); } else { QDeclarativeItem::wheelEvent(event); } @@ -1071,6 +1141,27 @@ void QDeclarativeFlickable::viewportMoved() } } + if (!d->vData.inOvershoot && !d->vData.fixingUp && d->flickingVertically + && (d->vData.move.value() > minYExtent() || d->vData.move.value() < maxYExtent()) + && qAbs(d->vData.smoothVelocity.value()) > 100) { + // Increase deceleration if we've passed a bound + d->vData.inOvershoot = true; + qreal maxDistance = d->overShootDistance(height()); + d->timeline.reset(d->vData.move); + d->timeline.accel(d->vData.move, -d->vData.smoothVelocity.value(), d->deceleration*QML_FLICK_OVERSHOOTFRICTION, maxDistance); + d->timeline.callback(QDeclarativeTimeLineCallback(&d->vData.move, d->fixupY_callback, d)); + } + if (!d->hData.inOvershoot && !d->hData.fixingUp && d->flickingHorizontally + && (d->hData.move.value() > minXExtent() || d->hData.move.value() < maxXExtent()) + && qAbs(d->hData.smoothVelocity.value()) > 100) { + // Increase deceleration if we've passed a bound + d->hData.inOvershoot = true; + qreal maxDistance = d->overShootDistance(width()); + d->timeline.reset(d->hData.move); + d->timeline.accel(d->hData.move, -d->hData.smoothVelocity.value(), d->deceleration*QML_FLICK_OVERSHOOTFRICTION, maxDistance); + d->timeline.callback(QDeclarativeTimeLineCallback(&d->hData.move, d->fixupX_callback, d)); + } + d->lastFlickablePosition = QPointF(d->hData.move.value(), d->vData.move.value()); d->vTime = d->timeline.time(); @@ -1503,7 +1594,7 @@ bool QDeclarativeFlickable::sceneEventFilter(QGraphicsItem *i, QEvent *e) \qmlproperty real Flickable::maximumFlickVelocity This property holds the maximum velocity that the user can flick the view in pixels/second. - The default is 2000 pixels/s + The default value is platform dependent. */ qreal QDeclarativeFlickable::maximumFlickVelocity() const { @@ -1524,7 +1615,7 @@ void QDeclarativeFlickable::setMaximumFlickVelocity(qreal v) \qmlproperty real Flickable::flickDeceleration This property holds the rate at which a flick will decelerate. - The default is 500. + The default value is platform dependent. */ qreal QDeclarativeFlickable::flickDeceleration() const { diff --git a/src/declarative/graphicsitems/qdeclarativeflickable_p_p.h b/src/declarative/graphicsitems/qdeclarativeflickable_p_p.h index 38a5eb3..1117abb 100644 --- a/src/declarative/graphicsitems/qdeclarativeflickable_p_p.h +++ b/src/declarative/graphicsitems/qdeclarativeflickable_p_p.h @@ -94,9 +94,19 @@ public: struct AxisData { AxisData(QDeclarativeFlickablePrivate *fp, void (QDeclarativeFlickablePrivate::*func)(qreal)) : move(fp, func), viewSize(-1), smoothVelocity(fp), atEnd(false), atBeginning(true) - , fixingUp(false) + , fixingUp(false), inOvershoot(false) {} + void reset() { + velocityBuffer.clear(); + dragStartOffset = 0; + fixingUp = false; + inOvershoot = false; + } + + void addVelocitySample(qreal v, qreal maxVelocity); + void updateVelocity(); + QDeclarativeTimeLineValueProxy<QDeclarativeFlickablePrivate> move; qreal viewSize; qreal pressPos; @@ -106,9 +116,11 @@ public: qreal velocity; qreal flickTarget; QDeclarativeFlickablePrivate::Velocity smoothVelocity; + QPODVector<qreal,10> velocityBuffer; bool atEnd : 1; bool atBeginning : 1; bool fixingUp : 1; + bool inOvershoot : 1; }; void flickX(qreal velocity); @@ -129,7 +141,7 @@ public: void setRoundedViewportX(qreal x); void setRoundedViewportY(qreal y); - qreal overShootDistance(qreal velocity, qreal size); + qreal overShootDistance(qreal size); void itemGeometryChanged(QDeclarativeItem *, const QRectF &, const QRectF &); diff --git a/src/declarative/graphicsitems/qdeclarativegridview.cpp b/src/declarative/graphicsitems/qdeclarativegridview.cpp index ce47d88..174114f 100644 --- a/src/declarative/graphicsitems/qdeclarativegridview.cpp +++ b/src/declarative/graphicsitems/qdeclarativegridview.cpp @@ -1115,6 +1115,7 @@ void QDeclarativeGridViewPrivate::fixup(AxisData &data, qreal minExtent, qreal m } else { QDeclarativeFlickablePrivate::fixup(data, minExtent, maxExtent); } + data.inOvershoot = false; fixupMode = Normal; } @@ -1196,7 +1197,7 @@ void QDeclarativeGridViewPrivate::flick(AxisData &data, qreal minExtent, qreal m accel = v2 / (2.0f * qAbs(dist)); } else { data.flickTarget = velocity > 0 ? minExtent : maxExtent; - overshootDist = overShoot ? overShootDistance(v, vSize) : 0; + overshootDist = overShoot ? overShootDistance(vSize) : 0; } timeline.reset(data.move); timeline.accel(data.move, v, accel, maxDistance + overshootDist); diff --git a/src/declarative/graphicsitems/qdeclarativelistview.cpp b/src/declarative/graphicsitems/qdeclarativelistview.cpp index 39bb429..9dbbb74 100644 --- a/src/declarative/graphicsitems/qdeclarativelistview.cpp +++ b/src/declarative/graphicsitems/qdeclarativelistview.cpp @@ -1354,6 +1354,7 @@ void QDeclarativeListViewPrivate::fixup(AxisData &data, qreal minExtent, qreal m } else { QDeclarativeFlickablePrivate::fixup(data, minExtent, maxExtent); } + data.inOvershoot = false; fixupMode = Normal; } @@ -1428,10 +1429,10 @@ void QDeclarativeListViewPrivate::flick(AxisData &data, qreal minExtent, qreal m data.flickTarget = isRightToLeft() ? -data.flickTarget+size() : data.flickTarget; if (overShoot) { if (data.flickTarget >= minExtent) { - overshootDist = overShootDistance(v, vSize); + overshootDist = overShootDistance(vSize); data.flickTarget += overshootDist; } else if (data.flickTarget <= maxExtent) { - overshootDist = overShootDistance(v, vSize); + overshootDist = overShootDistance(vSize); data.flickTarget -= overshootDist; } } @@ -1451,10 +1452,10 @@ void QDeclarativeListViewPrivate::flick(AxisData &data, qreal minExtent, qreal m } else if (overShoot) { data.flickTarget = data.move.value() - dist; if (data.flickTarget >= minExtent) { - overshootDist = overShootDistance(v, vSize); + overshootDist = overShootDistance(vSize); data.flickTarget += overshootDist; } else if (data.flickTarget <= maxExtent) { - overshootDist = overShootDistance(v, vSize); + overshootDist = overShootDistance(vSize); data.flickTarget -= overshootDist; } } @@ -2581,7 +2582,7 @@ void QDeclarativeListView::viewportMoved() d->inFlickCorrection = true; // Near an end and it seems that the extent has changed? // Recalculate the flick so that we don't end up in an odd position. - if (yflick()) { + if (yflick() && !d->vData.inOvershoot) { if (d->vData.velocity > 0) { const qreal minY = minYExtent(); if ((minY - d->vData.move.value() < height()/2 || d->vData.flickTarget - d->vData.move.value() < height()/2) @@ -2597,7 +2598,7 @@ void QDeclarativeListView::viewportMoved() } } - if (xflick()) { + if (xflick() && !d->hData.inOvershoot) { if (d->hData.velocity > 0) { const qreal minX = minXExtent(); if ((minX - d->hData.move.value() < width()/2 || d->hData.flickTarget - d->hData.move.value() < width()/2) diff --git a/src/declarative/qml/qdeclarativecomponent.cpp b/src/declarative/qml/qdeclarativecomponent.cpp index c284307..276f790 100644 --- a/src/declarative/qml/qdeclarativecomponent.cpp +++ b/src/declarative/qml/qdeclarativecomponent.cpp @@ -643,11 +643,11 @@ QDeclarativeComponent::QDeclarativeComponent(QDeclarativeComponentPrivate &dd, Q The \a properties argument is specified as a map of property-value items. For example, the code below creates an object with initial \c x and \c y values of 100 and 200, respectively: - \qml + \js var component = Qt.createComponent("Button.qml"); if (component.status == Component.Ready) component.createObject(parent, {"x": 100, "y": 100}); - \endqml + \endjs Dynamically created instances can be deleted with the \c destroy() method. See \l {Dynamic Object Management in QML} for more information. diff --git a/src/declarative/qml/qdeclarativetypeloader_p.h b/src/declarative/qml/qdeclarativetypeloader_p.h index 6938892..7f487a0 100644 --- a/src/declarative/qml/qdeclarativetypeloader_p.h +++ b/src/declarative/qml/qdeclarativetypeloader_p.h @@ -79,7 +79,7 @@ public: Loading, // Prior to data being received and dataReceived() being called WaitingForDependencies, // While there are outstanding addDependency()s Complete, // Finished - Error, // Error + Error // Error }; enum Type { diff --git a/src/declarative/util/qdeclarativebehavior.cpp b/src/declarative/util/qdeclarativebehavior.cpp index 41f8fe5..a1321e2 100644 --- a/src/declarative/util/qdeclarativebehavior.cpp +++ b/src/declarative/util/qdeclarativebehavior.cpp @@ -72,7 +72,7 @@ public: /*! \qmlclass Behavior QDeclarativeBehavior - \ingroup qml-animation-transition + \ingroup qml-animation-transition \since 4.7 \brief The Behavior element allows you to specify a default animation for a property change. @@ -91,7 +91,8 @@ public: If a \l{QML States}{state change} has a \l Transition that matches the same property as a Behavior, the \l Transition animation overrides the Behavior for that - state change. + state change. For general advice on using Behaviors to animate state changes, see + \l{Using QML Behaviors with States}. \sa {QML Animation and Transitions}, {declarative/animation/behaviors}{Behavior example}, QtDeclarative */ diff --git a/src/declarative/util/qdeclarativexmllistmodel.cpp b/src/declarative/util/qdeclarativexmllistmodel.cpp index d5c7d1b..4424490 100644 --- a/src/declarative/util/qdeclarativexmllistmodel.cpp +++ b/src/declarative/util/qdeclarativexmllistmodel.cpp @@ -919,7 +919,7 @@ void QDeclarativeXmlListModel::reload() } else { d->notifyQueryStarted(true); QNetworkRequest req(d->src); - req.setRawHeader("Accept", "application/xml"); + req.setRawHeader("Accept", "application/xml,*/*"); d->reply = qmlContext(this)->engine()->networkAccessManager()->get(req); QObject::connect(d->reply, SIGNAL(finished()), this, SLOT(requestFinished())); QObject::connect(d->reply, SIGNAL(downloadProgress(qint64,qint64)), |