diff options
Diffstat (limited to 'src/gui/dialogs')
-rw-r--r-- | src/gui/dialogs/dialogs.pri | 9 | ||||
-rw-r--r-- | src/gui/dialogs/qabstractprintdialog.cpp | 3 | ||||
-rw-r--r-- | src/gui/dialogs/qcolordialog.cpp | 21 | ||||
-rw-r--r-- | src/gui/dialogs/qcolordialog_mac.mm | 4 | ||||
-rw-r--r-- | src/gui/dialogs/qcolordialog_symbian.cpp | 107 | ||||
-rw-r--r-- | src/gui/dialogs/qfiledialog.cpp | 68 | ||||
-rw-r--r-- | src/gui/dialogs/qfiledialog_symbian.cpp | 196 | ||||
-rw-r--r-- | src/gui/dialogs/qfontdialog_mac.mm | 2 | ||||
-rw-r--r-- | src/gui/dialogs/qmessagebox.cpp | 88 | ||||
-rw-r--r-- | src/gui/dialogs/qpagesetupdialog.cpp | 3 | ||||
-rw-r--r-- | src/gui/dialogs/qpagesetupdialog_mac.mm | 4 | ||||
-rw-r--r-- | src/gui/dialogs/qprintpreviewdialog.cpp | 2 |
12 files changed, 435 insertions, 72 deletions
diff --git a/src/gui/dialogs/dialogs.pri b/src/gui/dialogs/dialogs.pri index cd8e71a..6ba707c 100644 --- a/src/gui/dialogs/dialogs.pri +++ b/src/gui/dialogs/dialogs.pri @@ -108,6 +108,15 @@ SOURCES += \ dialogs/qwizard.cpp \ dialogs/qprintpreviewdialog.cpp +symbian:contains(QT_CONFIG, s60) { + LIBS += -lCommonDialogs + SOURCES += dialogs/qfiledialog_symbian.cpp \ + dialogs/qcolordialog_symbian.cpp +} + FORMS += dialogs/qpagesetupwidget.ui RESOURCES += dialogs/qprintdialog.qrc RESOURCES += dialogs/qmessagebox.qrc + +# Compensate for lack of platform defines in Symbian3 +symbian: DEFINES += SYMBIAN_VERSION_$$upper($$replace(SYMBIAN_VERSION,\\.,_)) diff --git a/src/gui/dialogs/qabstractprintdialog.cpp b/src/gui/dialogs/qabstractprintdialog.cpp index 25d9ebb..641419f 100644 --- a/src/gui/dialogs/qabstractprintdialog.cpp +++ b/src/gui/dialogs/qabstractprintdialog.cpp @@ -65,6 +65,9 @@ class QPrintDialogPrivate : public QAbstractPrintDialogPrivate customize settings shown in print dialogs, but it is not used directly. Use QPrintDialog to display a print dialog in your application. + In Symbian, there is no support for printing. Hence, this dialog should not + be used in Symbian. + \sa QPrintDialog, QPrinter, {Printing with Qt} */ diff --git a/src/gui/dialogs/qcolordialog.cpp b/src/gui/dialogs/qcolordialog.cpp index e9b5720..a66a979 100644 --- a/src/gui/dialogs/qcolordialog.cpp +++ b/src/gui/dialogs/qcolordialog.cpp @@ -1952,6 +1952,12 @@ void QColorDialog::open(QObject *receiver, const char *member) \sa QDialog::open() */ +/* + For Symbian color dialogs +*/ +#ifdef Q_WS_S60 +extern QColor qtSymbianGetColor(const QColor &initial); +#endif /*! \since 4.5 @@ -1961,10 +1967,19 @@ void QColorDialog::open(QObject *receiver, const char *member) QColor::isValid()) color if the user cancels the dialog. The \a options argument allows you to customize the dialog. + + On Symbian, this static function will use the native color dialog and not a QColorDialog. + On Symbian the parameters \a title and \a parent has no relevance and the + \a options parameter is only used to define if the native color dialog is + used or not. */ QColor QColorDialog::getColor(const QColor &initial, QWidget *parent, const QString &title, ColorDialogOptions options) { +#ifdef Q_WS_S60 + if (!(options & DontUseNativeDialog)) + return qtSymbianGetColor(initial); +#endif QColorDialog dlg(parent); if (!title.isEmpty()) dlg.setWindowTitle(title); @@ -1979,10 +1994,16 @@ QColor QColorDialog::getColor(const QColor &initial, QWidget *parent, const QStr returns that color. The color is initially set to \a initial. The dialog is a child of \a parent. It returns an invalid (see QColor::isValid()) color if the user cancels the dialog. + + On Symbian, this static function will use the native + color dialog and not a QColorDialog. */ QColor QColorDialog::getColor(const QColor &initial, QWidget *parent) { +#ifdef Q_WS_S60 + return qtSymbianGetColor(initial); +#endif return getColor(initial, parent, QString(), ColorDialogOptions(0)); } diff --git a/src/gui/dialogs/qcolordialog_mac.mm b/src/gui/dialogs/qcolordialog_mac.mm index 82cfa24..655de08 100644 --- a/src/gui/dialogs/qcolordialog_mac.mm +++ b/src/gui/dialogs/qcolordialog_mac.mm @@ -185,7 +185,7 @@ QT_USE_NAMESPACE [self relayout]; } -- (void)colorChanged:(NSNotification *)notification; +- (void)colorChanged:(NSNotification *)notification { Q_UNUSED(notification); [self updateQtColor]; @@ -439,7 +439,7 @@ void QColorDialogPrivate::openCocoaColorPanel(const QColor &initial, priv:this]; [colorPanel setDelegate:static_cast<QT_MANGLE_NAMESPACE(QCocoaColorPanelDelegate) *>(delegate)]; } - [delegate setResultSet:false]; + [static_cast<QT_MANGLE_NAMESPACE(QCocoaColorPanelDelegate) *>(delegate) setResultSet:NO]; setCocoaPanelColor(initial); [static_cast<QT_MANGLE_NAMESPACE(QCocoaColorPanelDelegate) *>(delegate) showColorPanel]; } diff --git a/src/gui/dialogs/qcolordialog_symbian.cpp b/src/gui/dialogs/qcolordialog_symbian.cpp new file mode 100644 index 0000000..8f73f7c --- /dev/null +++ b/src/gui/dialogs/qcolordialog_symbian.cpp @@ -0,0 +1,107 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the QtGui module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** If you have questions regarding the use of this file, please contact +** Nokia at qt-info@nokia.com. +** +** +** +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include "qcolordialog_p.h" + +#ifndef QT_NO_COLORDIALOG + + +#include "qcolor.h" +#include "private/qguiplatformplugin_p.h" + +#ifdef Q_WS_S60 +#include <AknColourSelectionGrid.h> +#endif + +#include "private/qt_s60_p.h" + +QT_BEGIN_NAMESPACE + +QColor launchSymbianColorDialog(QColor initial) +{ + QColor currentColor = QColor::Invalid; +#ifdef Q_WS_S60 + QT_TRAP_THROWING( + CArrayFixFlat<TRgb>* array = new( ELeave ) CArrayFixFlat<TRgb>(17); + CleanupStack::PushL(array); + array->AppendL(KRgbBlack); + array->AppendL(KRgbDarkGray); + array->AppendL(KRgbDarkRed); + array->AppendL(KRgbDarkGreen); + array->AppendL(KRgbDarkYellow); + array->AppendL(KRgbDarkBlue); + array->AppendL(KRgbDarkMagenta); + array->AppendL(KRgbDarkCyan); + array->AppendL(KRgbRed); + array->AppendL(KRgbGreen); + array->AppendL(KRgbYellow); + array->AppendL(KRgbBlue); + array->AppendL(KRgbMagenta); + array->AppendL(KRgbCyan); + array->AppendL(KRgbGray); + array->AppendL(KRgbWhite); + + TRgb initialColour(initial.red(), initial.green(), initial.blue(), initial.alpha()); + + TBool noneChosen = EFalse; // If true shows the default colour button + CAknColourSelectionGrid* colourSelectionGrid = + CAknColourSelectionGrid::NewL(array, EFalse, noneChosen, initialColour); + CleanupStack::PushL(colourSelectionGrid); + + if (colourSelectionGrid->ExecuteLD()) { + currentColor.setRgb(initialColour.Red(), initialColour.Green(), + initialColour.Blue(), initialColour.Alpha()); + } + CleanupStack::Pop(colourSelectionGrid); + CleanupStack::PopAndDestroy(array); + ); +#endif + return currentColor; +} + +QColor qtSymbianGetColor(const QColor &initial) +{ + return launchSymbianColorDialog(initial); +} + +QT_END_NAMESPACE + +#endif // QT_NO_COLORDIALOG diff --git a/src/gui/dialogs/qfiledialog.cpp b/src/gui/dialogs/qfiledialog.cpp index 1b9d127..9509330 100644 --- a/src/gui/dialogs/qfiledialog.cpp +++ b/src/gui/dialogs/qfiledialog.cpp @@ -1616,6 +1616,25 @@ extern QStringList qt_win_get_open_file_names(const QFileDialogArgs &args, extern QString qt_win_get_existing_directory(const QFileDialogArgs &args); #endif +/* + For Symbian file dialogs +*/ +#if defined(Q_WS_S60) +extern QString qtSymbianGetOpenFileName(const QString &caption, + const QString &dir, + const QString &filter); + +extern QStringList qtSymbianGetOpenFileNames(const QString &caption, + const QString &dir, + const QString &filter); + +extern QString qtSymbianGetSaveFileName(const QString &caption, + const QString &dir); + +extern QString qtSymbianGetExistingDirectory(const QString &caption, + const QString &dir); +#endif + /*! This is a convenience static function that returns an existing file selected by the user. If the user presses Cancel, it returns a null string. @@ -1644,8 +1663,8 @@ extern QString qt_win_get_existing_directory(const QFileDialogArgs &args); The dialog's caption is set to \a caption. If \a caption is not specified then a default caption will be used. - On Windows and Mac OS X, this static function will use the native file - dialog and not a QFileDialog. + On Windows, Mac OS X and Symbian^3, this static function will use the + native file dialog and not a QFileDialog. On Windows the dialog will spin a blocking modal event loop that will not dispatch any QTimers, and if \a parent is not 0 then it will position the @@ -1657,6 +1676,10 @@ extern QString qt_win_get_existing_directory(const QFileDialogArgs &args); \a options includes DontResolveSymlinks, the file dialog will treat symlinks as regular directories. + On Symbian^3 the parameter \a selectedFilter has no meaning and the + \a options parameter is only used to define if the native file dialog is + used. + \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QFileDialog constructors. @@ -1672,6 +1695,10 @@ QString QFileDialog::getOpenFileName(QWidget *parent, { if (qt_filedialog_open_filename_hook && !(options & DontUseNativeDialog)) return qt_filedialog_open_filename_hook(parent, caption, dir, filter, selectedFilter, options); +#if defined(Q_WS_S60) + if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0 && !(options & DontUseNativeDialog)) + return qtSymbianGetOpenFileName(caption, dir, filter); +#endif QFileDialogArgs args; args.parent = parent; args.caption = caption; @@ -1722,8 +1749,8 @@ QString QFileDialog::getOpenFileName(QWidget *parent, The dialog's caption is set to \a caption. If \a caption is not specified then a default caption will be used. - On Windows and Mac OS X, this static function will use the native file - dialog and not a QFileDialog. + On Windows, Mac OS X and Symbian^3, this static function will use the + native file dialog and not a QFileDialog. On Windows the dialog will spin a blocking modal event loop that will not dispatch any QTimers, and if \a parent is not 0 then it will position the @@ -1741,6 +1768,10 @@ QString QFileDialog::getOpenFileName(QWidget *parent, \snippet doc/src/snippets/code/src_gui_dialogs_qfiledialog.cpp 10 + On Symbian^3 the parameter \a selectedFilter has no meaning and the + \a options parameter is only used to define if the native file dialog is + used. + \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QFileDialog constructors. @@ -1756,6 +1787,10 @@ QStringList QFileDialog::getOpenFileNames(QWidget *parent, { if (qt_filedialog_open_filenames_hook && !(options & DontUseNativeDialog)) return qt_filedialog_open_filenames_hook(parent, caption, dir, filter, selectedFilter, options); +#if defined(Q_WS_S60) + if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0 && !(options & DontUseNativeDialog)) + return qtSymbianGetOpenFileNames(caption, dir, filter); +#endif QFileDialogArgs args; args.parent = parent; args.caption = caption; @@ -1813,8 +1848,8 @@ QStringList QFileDialog::getOpenFileNames(QWidget *parent, The dialog's caption is set to \a caption. If \a caption is not specified, a default caption will be used. - On Windows and Mac OS X, this static function will use the native file - dialog and not a QFileDialog. + On Windows, Mac OS X and Symbian^3, this static function will use the + native file dialog and not a QFileDialog. On Windows the dialog will spin a blocking modal event loop that will not dispatch any QTimers, and if \a parent is not 0 then it will position the @@ -1827,6 +1862,10 @@ QStringList QFileDialog::getOpenFileNames(QWidget *parent, \a options includes DontResolveSymlinks the file dialog will treat symlinks as regular directories. + On Symbian^3 the parameters \a filter and \a selectedFilter have no + meaning. The \a options parameter is only used to define if the native file + dialog is used. + \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QFileDialog constructors. @@ -1842,6 +1881,10 @@ QString QFileDialog::getSaveFileName(QWidget *parent, { if (qt_filedialog_save_filename_hook && !(options & DontUseNativeDialog)) return qt_filedialog_save_filename_hook(parent, caption, dir, filter, selectedFilter, options); +#if defined(Q_WS_S60) + if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0 && !(options & DontUseNativeDialog)) + return qtSymbianGetSaveFileName(caption, dir); +#endif QFileDialogArgs args; args.parent = parent; args.caption = caption; @@ -1890,9 +1933,9 @@ QString QFileDialog::getSaveFileName(QWidget *parent, pass. To ensure a native file dialog, \l{QFileDialog::}{ShowDirsOnly} must be set. - On Windows and Mac OS X, this static function will use the native file - dialog and not a QFileDialog. On Windows CE, if the device has no native - file dialog, a QFileDialog will be used. + On Windows, Mac OS X and Symbian^3, this static function will use the + native file dialog and not a QFileDialog. On Windows CE, if the device has + no native file dialog, a QFileDialog will be used. On Unix/X11, the normal behavior of the file dialog is to resolve and follow symlinks. For example, if \c{/usr/tmp} is a symlink to \c{/var/tmp}, @@ -1904,6 +1947,9 @@ QString QFileDialog::getSaveFileName(QWidget *parent, dispatch any QTimers, and if \a parent is not 0 then it will position the dialog just below the parent's title bar. + On Symbian^3 the \a options parameter is only used to define if the native + file dialog is used. + \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog yourself using one of the QFileDialog constructors. @@ -1917,6 +1963,10 @@ QString QFileDialog::getExistingDirectory(QWidget *parent, { if (qt_filedialog_existing_directory_hook && !(options & DontUseNativeDialog)) return qt_filedialog_existing_directory_hook(parent, caption, dir, options); +#if defined(Q_WS_S60) + if (QSysInfo::s60Version() > QSysInfo::SV_S60_5_0 && !(options & DontUseNativeDialog)) + return qtSymbianGetExistingDirectory(caption, dir); +#endif QFileDialogArgs args; args.parent = parent; args.caption = caption; diff --git a/src/gui/dialogs/qfiledialog_symbian.cpp b/src/gui/dialogs/qfiledialog_symbian.cpp new file mode 100644 index 0000000..1f70305 --- /dev/null +++ b/src/gui/dialogs/qfiledialog_symbian.cpp @@ -0,0 +1,196 @@ +/**************************************************************************** +** +** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). +** All rights reserved. +** Contact: Nokia Corporation (qt-info@nokia.com) +** +** This file is part of the QtGui module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the Technology Preview License Agreement accompanying +** this package. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain additional +** rights. These rights are described in the Nokia Qt LGPL Exception +** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. +** +** If you have questions regarding the use of this file, please contact +** Nokia at qt-info@nokia.com. +** +** +** +** +** +** +** +** +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include "qfiledialog.h" + +#ifndef QT_NO_FILEDIALOG + +#include <private/qfiledialog_p.h> +#if defined(Q_WS_S60) && defined(SYMBIAN_VERSION_SYMBIAN3) +#include <driveinfo.h> +#include <AknCommonDialogsDynMem.h> +#include <CAknMemorySelectionDialogMultiDrive.h> +#include <MAknFileFilter.h> +#endif +#include "private/qcore_symbian_p.h" + +QT_BEGIN_NAMESPACE + +enum DialogMode { DialogOpen, DialogSave, DialogFolder }; +#if defined(Q_WS_S60) && defined(SYMBIAN_VERSION_SYMBIAN3) +class CExtensionFilter : public MAknFileFilter +{ +public: + void setFilter(const QString filter) + { + filterList.clear(); + if (filter.left(2) == QLatin1String("*.")) { + //Filter has only extensions + filterList << filter.split(" "); + return; + } else { + //Extensions are in parenthesis and there may be several filters + QStringList separatedFilters(filter.split(QLatin1String(";;"))); + for (int i = 0; i < separatedFilters.size(); i++) { + if (separatedFilters.at(i).contains(QLatin1String("(*)"))) { + filterList << QLatin1String("(*)"); + return; + } + } + QRegExp rx("\\(([^\\)]*)\\)"); + int pos = 0; + while ((pos = rx.indexIn(filter, pos)) != -1) { + filterList << rx.cap(1).split(QLatin1String(" ")); + pos += rx.matchedLength(); + } + } + } + + TBool Accept(const TDesC &/*aDriveAndPath*/, const TEntry &aEntry) const + { + if (aEntry.IsDir()) + return ETrue; + + //If no filter for files, all can be accepted + if (filterList.isEmpty()) + return ETrue; + + if (filterList == QStringList(QLatin1String("(*)"))) + return ETrue; + + for (int i = 0; i < filterList.size(); ++i) { + QString extension = filterList.at(i); + //remove '*' from the beginning of the extension + if (extension.at(0) == QLatin1Char('*')) + extension = extension.mid(1); + + QString fileName = qt_TDesC2QString(aEntry.iName); + if (fileName.endsWith(extension)) + return ETrue; + } + return EFalse; + } + +private: + QStringList filterList; +}; +#endif + +static QString launchSymbianDialog(const QString dialogCaption, const QString startDirectory, + const QString filter, DialogMode dialogMode) +{ + QString selection; +#if defined(Q_WS_S60) && defined(SYMBIAN_VERSION_SYMBIAN3) + QT_TRAP_THROWING( + TFileName startFolder; + if (!startDirectory.isEmpty()) { + QString dir = QDir::toNativeSeparators(startDirectory); + startFolder = qt_QString2TPtrC(dir); + } + TInt types = AknCommonDialogsDynMem::EMemoryTypeMMCExternal| + AknCommonDialogsDynMem::EMemoryTypeInternalMassStorage| + AknCommonDialogsDynMem::EMemoryTypePhone; + + TPtrC titlePtr(qt_QString2TPtrC(dialogCaption)); + TFileName target; + bool select = false; + if (dialogMode == DialogOpen) { + CExtensionFilter* extensionFilter = new (ELeave) CExtensionFilter; + CleanupStack::PushL(extensionFilter); + extensionFilter->setFilter(filter); + select = AknCommonDialogsDynMem::RunSelectDlgLD(types, target, + startFolder, NULL, NULL, titlePtr, extensionFilter); + CleanupStack::Pop(extensionFilter); + } else if (dialogMode == DialogSave) { + select = AknCommonDialogsDynMem::RunSaveDlgLD(types, target, + startFolder, NULL, NULL, titlePtr); + } else if (dialogMode == DialogFolder) { + select = AknCommonDialogsDynMem::RunFolderSelectDlgLD(types, target, startFolder, + 0, 0, titlePtr, NULL, NULL); + } + if (select) + selection.append(qt_TDesC2QString(target)); + ); +#endif + return selection; +} + +QString qtSymbianGetOpenFileName(const QString &caption, + const QString &dir, + const QString &filter) +{ + return launchSymbianDialog(caption, dir, filter, DialogOpen); +} + +QStringList qtSymbianGetOpenFileNames(const QString &caption, + const QString &dir, + const QString &filter) +{ + QString fileName; + fileName.append(launchSymbianDialog(caption, dir, filter, DialogOpen)); + QStringList fileList; + fileList << fileName; + + return fileList; +} + +QString qtSymbianGetSaveFileName(const QString &caption, + const QString &dir) +{ + return launchSymbianDialog(caption, dir, QString(), DialogSave); +} + +QString qtSymbianGetExistingDirectory(const QString &caption, + const QString &dir) +{ + QString folderCaption; + if (!caption.isEmpty()) { + folderCaption.append(caption); + } else { + // Title for folder selection dialog is mandatory + folderCaption.append(QFileDialog::tr("Find Directory")); + } + return launchSymbianDialog(folderCaption, dir, QString(), DialogFolder); +} + +QT_END_NAMESPACE + +#endif diff --git a/src/gui/dialogs/qfontdialog_mac.mm b/src/gui/dialogs/qfontdialog_mac.mm index 1b9778c..9a92b27 100644 --- a/src/gui/dialogs/qfontdialog_mac.mm +++ b/src/gui/dialogs/qfontdialog_mac.mm @@ -340,7 +340,7 @@ static QFont qfontForCocoaFont(NSFont *cocoaFont, const QFont &resolveFont) [self relayoutToContentSize:[[mStolenContentView superview] frame].size]; } -- (void)relayoutToContentSize:(NSSize)frameSize; +- (void)relayoutToContentSize:(NSSize)frameSize { Q_ASSERT(mPanelHackedWithButtons); diff --git a/src/gui/dialogs/qmessagebox.cpp b/src/gui/dialogs/qmessagebox.cpp index f849996..224a176 100644 --- a/src/gui/dialogs/qmessagebox.cpp +++ b/src/gui/dialogs/qmessagebox.cpp @@ -776,10 +776,8 @@ QMessageBox::QMessageBox(QWidget *parent) added at any time using addButton(). The \a parent and \a f arguments are passed to the QDialog constructor. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. On Mac OS X, if \a parent is not 0 and you want your message box to appear as a Qt::Sheet of that parent, set the message box's @@ -1549,10 +1547,8 @@ static QMessageBox::StandardButton showNewMessageBox(QWidget *parent, \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \sa question(), warning(), critical() */ @@ -1579,10 +1575,8 @@ QMessageBox::StandardButton QMessageBox::information(QWidget *parent, const QStr \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \sa information(), warning(), critical() */ @@ -1607,10 +1601,8 @@ QMessageBox::StandardButton QMessageBox::question(QWidget *parent, const QString \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \sa question(), information(), critical() */ @@ -1635,10 +1627,8 @@ QMessageBox::StandardButton QMessageBox::warning(QWidget *parent, const QString \key Esc was pressed instead, the \l{Default and Escape Keys} {escape button} is returned. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -1670,7 +1660,7 @@ QMessageBox::StandardButton QMessageBox::critical(QWidget *parent, const QString The about box has a single button labelled "OK". On Mac OS X, the about box is popped up as a modeless window; on other platforms, - it is currently a window modal. + it is currently application modal. \sa QWidget::windowIcon(), QApplication::activeWindow() */ @@ -1723,7 +1713,7 @@ void QMessageBox::about(QWidget *parent, const QString &title, const QString &te QApplication provides this functionality as a slot. On Mac OS X, the about box is popped up as a modeless window; on - other platforms, it is currently window modal. + other platforms, it is currently application modal. \sa QApplication::aboutQt() */ @@ -1983,10 +1973,8 @@ void QMessageBoxPrivate::retranslateStrings() \snippet doc/src/snippets/dialogs/dialogs.cpp 2 - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. The \a parent and \a f arguments are passed to the QDialog constructor. @@ -2035,10 +2023,8 @@ QMessageBox::QMessageBox(const QString &title, const QString &text, Icon icon, Returns the identity (QMessageBox::Ok, or QMessageBox::No, etc.) of the button that was clicked. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2073,10 +2059,8 @@ int QMessageBox::information(QWidget *parent, const QString &title, const QStrin supply 0, 1 or 2 to make pressing \key Esc equivalent to clicking the relevant button. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2125,10 +2109,8 @@ int QMessageBox::information(QWidget *parent, const QString &title, const QStrin Returns the identity (QMessageBox::Yes, or QMessageBox::No, etc.) of the button that was clicked. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2163,10 +2145,8 @@ int QMessageBox::question(QWidget *parent, const QString &title, const QString& supply 0, 1 or 2 to make pressing Escape equivalent to clicking the relevant button. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2215,10 +2195,8 @@ int QMessageBox::question(QWidget *parent, const QString &title, const QString& Returns the identity (QMessageBox::Ok or QMessageBox::No or ...) of the button that was clicked. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2253,10 +2231,8 @@ int QMessageBox::warning(QWidget *parent, const QString &title, const QString& t supply 0, 1, or 2 to make pressing Escape equivalent to clicking the relevant button. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2304,10 +2280,8 @@ int QMessageBox::warning(QWidget *parent, const QString &title, const QString& t Returns the identity (QMessageBox::Ok, or QMessageBox::No, etc.) of the button that was clicked. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog @@ -2343,10 +2317,8 @@ int QMessageBox::critical(QWidget *parent, const QString &title, const QString& supply 0, 1, or 2 to make pressing Escape equivalent to clicking the relevant button. - If \a parent is 0, the message box is an \l{Qt::ApplicationModal} - {application modal} dialog box. If \a parent is a widget, the - message box is \l{Qt::WindowModal} {window modal} relative to \a - parent. + The message box is an \l{Qt::ApplicationModal} {application modal} + dialog box. \warning Do not delete \a parent during the execution of the dialog. If you want to do this, you should create the dialog diff --git a/src/gui/dialogs/qpagesetupdialog.cpp b/src/gui/dialogs/qpagesetupdialog.cpp index 5d77de1..b5be942 100644 --- a/src/gui/dialogs/qpagesetupdialog.cpp +++ b/src/gui/dialogs/qpagesetupdialog.cpp @@ -62,6 +62,9 @@ QT_BEGIN_NAMESPACE page margins set on a QPrinter won't show in the native Mac OS X page setup dialog. + In Symbian, there is no support for printing. Hence, this dialog should not + be used in Symbian. + \sa QPrinter, QPrintDialog */ diff --git a/src/gui/dialogs/qpagesetupdialog_mac.mm b/src/gui/dialogs/qpagesetupdialog_mac.mm index 0302be4..f7a9aab 100644 --- a/src/gui/dialogs/qpagesetupdialog_mac.mm +++ b/src/gui/dialogs/qpagesetupdialog_mac.mm @@ -61,7 +61,7 @@ QT_USE_NAMESPACE @end @implementation QT_MANGLE_NAMESPACE(QCocoaPageLayoutDelegate) -- (id)initWithMacPrintEngine:(QMacPrintEnginePrivate *)printEngine; +- (id)initWithMacPrintEngine:(QMacPrintEnginePrivate *)printEngine { self = [super init]; if (self) { @@ -312,4 +312,4 @@ int QPageSetupDialog::exec() QT_END_NAMESPACE -#endif QT_NO_PRINTDIALOG +#endif /* QT_NO_PRINTDIALOG */ diff --git a/src/gui/dialogs/qprintpreviewdialog.cpp b/src/gui/dialogs/qprintpreviewdialog.cpp index f21343e..d74742a 100644 --- a/src/gui/dialogs/qprintpreviewdialog.cpp +++ b/src/gui/dialogs/qprintpreviewdialog.cpp @@ -676,6 +676,8 @@ void QPrintPreviewDialogPrivate::_q_zoomFactorChanged() Call QPrintPreviewDialog::exec() to show the preview dialog. \endlist + In Symbian, there is no support for printing. Hence, this dialog should not + be used in Symbian. \sa QPrinter, QPrintDialog, QPageSetupDialog, QPrintPreviewWidget */ |