diff options
Diffstat (limited to 'src/gui/widgets/qtextedit.cpp')
| -rw-r--r-- | src/gui/widgets/qtextedit.cpp | 2783 |
1 files changed, 2783 insertions, 0 deletions
diff --git a/src/gui/widgets/qtextedit.cpp b/src/gui/widgets/qtextedit.cpp new file mode 100644 index 0000000..b239e32 --- /dev/null +++ b/src/gui/widgets/qtextedit.cpp @@ -0,0 +1,2783 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the QtGui module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include "qtextedit_p.h" +#include "qlineedit.h" +#include "qtextbrowser.h" + +#ifndef QT_NO_TEXTEDIT +#include <qfont.h> +#include <qpainter.h> +#include <qevent.h> +#include <qdebug.h> +#include <qmime.h> +#include <qdrag.h> +#include <qclipboard.h> +#include <qmenu.h> +#include <qstyle.h> +#include <qtimer.h> +#include "private/qtextdocumentlayout_p.h" +#include "qtextdocument.h" +#include "private/qtextdocument_p.h" +#include "qtextlist.h" +#include "private/qtextcontrol_p.h" + +#include <qtextformat.h> +#include <qdatetime.h> +#include <qapplication.h> +#include <limits.h> +#include <qtexttable.h> +#include <qvariant.h> + +#include <qinputcontext.h> +#endif + +QT_BEGIN_NAMESPACE + + +#ifndef QT_NO_TEXTEDIT + +class QTextEditControl : public QTextControl +{ +public: + inline QTextEditControl(QObject *parent) : QTextControl(parent) {} + + virtual QMimeData *createMimeDataFromSelection() const { + QTextEdit *ed = qobject_cast<QTextEdit *>(parent()); + if (!ed) + return QTextControl::createMimeDataFromSelection(); + return ed->createMimeDataFromSelection(); + } + virtual bool canInsertFromMimeData(const QMimeData *source) const { + QTextEdit *ed = qobject_cast<QTextEdit *>(parent()); + if (!ed) + return QTextControl::canInsertFromMimeData(source); + return ed->canInsertFromMimeData(source); + } + virtual void insertFromMimeData(const QMimeData *source) { + QTextEdit *ed = qobject_cast<QTextEdit *>(parent()); + if (!ed) + QTextControl::insertFromMimeData(source); + else + ed->insertFromMimeData(source); + } +}; + +QTextEditPrivate::QTextEditPrivate() + : control(0), + autoFormatting(QTextEdit::AutoNone), tabChangesFocus(false), + lineWrap(QTextEdit::WidgetWidth), lineWrapColumnOrWidth(0), + wordWrap(QTextOption::WrapAtWordBoundaryOrAnywhere), textFormat(Qt::AutoText) +{ + ignoreAutomaticScrollbarAdjustment = false; + preferRichText = false; + showCursorOnInitialShow = true; + inDrag = false; +} + +void QTextEditPrivate::createAutoBulletList() +{ + QTextCursor cursor = control->textCursor(); + cursor.beginEditBlock(); + + QTextBlockFormat blockFmt = cursor.blockFormat(); + + QTextListFormat listFmt; + listFmt.setStyle(QTextListFormat::ListDisc); + listFmt.setIndent(blockFmt.indent() + 1); + + blockFmt.setIndent(0); + cursor.setBlockFormat(blockFmt); + + cursor.createList(listFmt); + + cursor.endEditBlock(); + control->setTextCursor(cursor); +} + +void QTextEditPrivate::init(const QString &html) +{ + Q_Q(QTextEdit); + control = new QTextEditControl(q); + control->setPalette(q->palette()); + + QObject::connect(control, SIGNAL(microFocusChanged()), q, SLOT(updateMicroFocus())); + QObject::connect(control, SIGNAL(documentSizeChanged(QSizeF)), q, SLOT(_q_adjustScrollbars())); + QObject::connect(control, SIGNAL(updateRequest(QRectF)), q, SLOT(_q_repaintContents(QRectF))); + QObject::connect(control, SIGNAL(visibilityRequest(QRectF)), q, SLOT(_q_ensureVisible(QRectF))); + QObject::connect(control, SIGNAL(currentCharFormatChanged(QTextCharFormat)), + q, SLOT(_q_currentCharFormatChanged(QTextCharFormat))); + + QObject::connect(control, SIGNAL(textChanged()), q, SIGNAL(textChanged())); + QObject::connect(control, SIGNAL(undoAvailable(bool)), q, SIGNAL(undoAvailable(bool))); + QObject::connect(control, SIGNAL(redoAvailable(bool)), q, SIGNAL(redoAvailable(bool))); + QObject::connect(control, SIGNAL(copyAvailable(bool)), q, SIGNAL(copyAvailable(bool))); + QObject::connect(control, SIGNAL(selectionChanged()), q, SIGNAL(selectionChanged())); + QObject::connect(control, SIGNAL(cursorPositionChanged()), q, SIGNAL(cursorPositionChanged())); + + QTextDocument *doc = control->document(); + // set a null page size initially to avoid any relayouting until the textedit + // is shown. relayoutDocument() will take care of setting the page size to the + // viewport dimensions later. + doc->setPageSize(QSize(0, 0)); + doc->documentLayout()->setPaintDevice(viewport); + doc->setDefaultFont(q->font()); + doc->setUndoRedoEnabled(false); // flush undo buffer. + doc->setUndoRedoEnabled(true); + + if (!html.isEmpty()) + control->setHtml(html); + + hbar->setSingleStep(20); + vbar->setSingleStep(20); + + viewport->setBackgroundRole(QPalette::Base); + q->setAcceptDrops(true); + q->setFocusPolicy(Qt::WheelFocus); + q->setAttribute(Qt::WA_KeyCompression); + q->setAttribute(Qt::WA_InputMethodEnabled); + +#ifndef QT_NO_CURSOR + viewport->setCursor(Qt::IBeamCursor); +#endif +} + +void QTextEditPrivate::_q_repaintContents(const QRectF &contentsRect) +{ + if (!contentsRect.isValid()) { + viewport->update(); + return; + } + const int xOffset = horizontalOffset(); + const int yOffset = verticalOffset(); + const QRectF visibleRect(xOffset, yOffset, viewport->width(), viewport->height()); + + QRect r = contentsRect.intersected(visibleRect).toAlignedRect(); + if (r.isEmpty()) + return; + + r.translate(-xOffset, -yOffset); + viewport->update(r); +} + +void QTextEditPrivate::pageUpDown(QTextCursor::MoveOperation op, QTextCursor::MoveMode moveMode) +{ + QTextCursor cursor = control->textCursor(); + bool moved = false; + qreal lastY = control->cursorRect(cursor).top(); + qreal distance = 0; + // move using movePosition to keep the cursor's x + do { + qreal y = control->cursorRect(cursor).top(); + distance += qAbs(y - lastY); + lastY = y; + moved = cursor.movePosition(op, moveMode); + } while (moved && distance < viewport->height()); + + if (moved) { + if (op == QTextCursor::Up) { + cursor.movePosition(QTextCursor::Down, moveMode); + vbar->triggerAction(QAbstractSlider::SliderPageStepSub); + } else { + cursor.movePosition(QTextCursor::Up, moveMode); + vbar->triggerAction(QAbstractSlider::SliderPageStepAdd); + } + } + control->setTextCursor(cursor); +} + +#ifndef QT_NO_SCROLLBAR +static QSize documentSize(QTextControl *control) +{ + QTextDocument *doc = control->document(); + QAbstractTextDocumentLayout *layout = doc->documentLayout(); + + QSize docSize; + + if (QTextDocumentLayout *tlayout = qobject_cast<QTextDocumentLayout *>(layout)) { + docSize = tlayout->dynamicDocumentSize().toSize(); + int percentageDone = tlayout->layoutStatus(); + // extrapolate height + if (percentageDone > 0) + docSize.setHeight(docSize.height() * 100 / percentageDone); + } else { + docSize = layout->documentSize().toSize(); + } + + return docSize; +} + +void QTextEditPrivate::_q_adjustScrollbars() +{ + if (ignoreAutomaticScrollbarAdjustment) + return; + ignoreAutomaticScrollbarAdjustment = true; // avoid recursion, #106108 + + QSize viewportSize = viewport->size(); + QSize docSize = documentSize(control); + + // due to the recursion guard we have to repeat this step a few times, + // as adding/removing a scroll bar will cause the document or viewport + // size to change + // ideally we should loop until the viewport size and doc size stabilize, + // but in corner cases they might fluctuate, so we need to limit the + // number of iterations + for (int i = 0; i < 4; ++i) { + hbar->setRange(0, docSize.width() - viewportSize.width()); + hbar->setPageStep(viewportSize.width()); + + vbar->setRange(0, docSize.height() - viewportSize.height()); + vbar->setPageStep(viewportSize.height()); + + // if we are in left-to-right mode widening the document due to + // lazy layouting does not require a repaint. If in right-to-left + // the scroll bar has the value zero and it visually has the maximum + // value (it is visually at the right), then widening the document + // keeps it at value zero but visually adjusts it to the new maximum + // on the right, hence we need an update. + if (q_func()->isRightToLeft()) + viewport->update(); + + _q_showOrHideScrollBars(); + + const QSize oldViewportSize = viewportSize; + const QSize oldDocSize = docSize; + + // make sure the document is layouted if the viewport width changes + viewportSize = viewport->size(); + if (viewportSize.width() != oldViewportSize.width()) + relayoutDocument(); + + docSize = documentSize(control); + if (viewportSize == oldViewportSize && docSize == oldDocSize) + break; + } + ignoreAutomaticScrollbarAdjustment = false; +} +#endif + +// rect is in content coordinates +void QTextEditPrivate::_q_ensureVisible(const QRectF &_rect) +{ + const QRect rect = _rect.toRect(); + if ((vbar->isVisible() && vbar->maximum() < rect.bottom()) + || (hbar->isVisible() && hbar->maximum() < rect.right())) + _q_adjustScrollbars(); + const int visibleWidth = viewport->width(); + const int visibleHeight = viewport->height(); + const bool rtl = q_func()->isRightToLeft(); + + if (rect.x() < horizontalOffset()) { + if (rtl) + hbar->setValue(hbar->maximum() - rect.x()); + else + hbar->setValue(rect.x()); + } else if (rect.x() + rect.width() > horizontalOffset() + visibleWidth) { + if (rtl) + hbar->setValue(hbar->maximum() - (rect.x() + rect.width() - visibleWidth)); + else + hbar->setValue(rect.x() + rect.width() - visibleWidth); + } + + if (rect.y() < verticalOffset()) + vbar->setValue(rect.y()); + else if (rect.y() + rect.height() > verticalOffset() + visibleHeight) + vbar->setValue(rect.y() + rect.height() - visibleHeight); +} + +/*! + \class QTextEdit + \brief The QTextEdit class provides a widget that is used to edit and display + both plain and rich text. + + \ingroup text + \mainclass + + \tableofcontents + + \section1 Introduction and Concepts + + QTextEdit is an advanced WYSIWYG viewer/editor supporting rich + text formatting using HTML-style tags. It is optimized to handle + large documents and to respond quickly to user input. + + QTextEdit works on paragraphs and characters. A paragraph is a + formatted string which is word-wrapped to fit into the width of + the widget. By default when reading plain text, one newline + signifies a paragraph. A document consists of zero or more + paragraphs. The words in the paragraph are aligned in accordance + with the paragraph's alignment. Paragraphs are separated by hard + line breaks. Each character within a paragraph has its own + attributes, for example, font and color. + + QTextEdit can display images, lists and tables. If the text is + too large to view within the text edit's viewport, scroll bars will + appear. The text edit can load both plain text and HTML files (a + subset of HTML 3.2 and 4). + + If you just need to display a small piece of rich text use QLabel. + + The rich text support in Qt is designed to provide a fast, portable and + efficient way to add reasonable online help facilities to + applications, and to provide a basis for rich text editors. If + you find the HTML support insufficient for your needs you may consider + the use of QtWebKit, which provides a full-featured web browser + widget. + + The shape of the mouse cursor on a QTextEdit is Qt::IBeamCursor by default. + It can be changed through the viewport()'s cursor property. + + \section1 Using QTextEdit as a Display Widget + + QTextEdit can display a large HTML subset, including tables and + images. + + The text is set or replaced using setHtml() which deletes any + existing text and replaces it with the text passed in the + setHtml() call. If you call setHtml() with legacy HTML, and then + call toHtml(), the text that is returned may have different markup, + but will render the same. The entire text can be deleted with clear(). + + Text itself can be inserted using the QTextCursor class or using the + convenience functions insertHtml(), insertPlainText(), append() or + paste(). QTextCursor is also able to insert complex objects like tables + or lists into the document, and it deals with creating selections + and applying changes to selected text. + + By default the text edit wraps words at whitespace to fit within + the text edit widget. The setLineWrapMode() function is used to + specify the kind of line wrap you want, or \l NoWrap if you don't + want any wrapping. Call setLineWrapMode() to set a fixed pixel width + \l FixedPixelWidth, or character column (e.g. 80 column) \l + FixedColumnWidth with the pixels or columns specified with + setLineWrapColumnOrWidth(). If you use word wrap to the widget's width + \l WidgetWidth, you can specify whether to break on whitespace or + anywhere with setWordWrapMode(). + + The find() function can be used to find and select a given string + within the text. + + If you want to limit the total number of paragraphs in a QTextEdit, + as it is for example open useful in a log viewer, then you can use + QTextDocument's maximumBlockCount property for that. + + \section2 Read-only Key Bindings + + When QTextEdit is used read-only the key bindings are limited to + navigation, and text may only be selected with the mouse: + \table + \header \i Keypresses \i Action + \row \i Up \i Moves one line up. + \row \i Down \i Moves one line down. + \row \i Left \i Moves one character to the left. + \row \i Right \i Moves one character to the right. + \row \i PageUp \i Moves one (viewport) page up. + \row \i PageDown \i Moves one (viewport) page down. + \row \i Home \i Moves to the beginning of the text. + \row \i End \i Moves to the end of the text. + \row \i Alt+Wheel + \i Scrolls the page horizontally (the Wheel is the mouse wheel). + \row \i Ctrl+Wheel \i Zooms the text. + \row \i Ctrl+A \i Selects all text. + \endtable + + The text edit may be able to provide some meta-information. For + example, the documentTitle() function will return the text from + within HTML \c{<title>} tags. + + \section1 Using QTextEdit as an Editor + + All the information about using QTextEdit as a display widget also + applies here. + + The current char format's attributes are set with setFontItalic(), + setFontWeight(), setFontUnderline(), setFontFamily(), + setFontPointSize(), setTextColor() and setCurrentFont(). The current + paragraph's alignment is set with setAlignment(). + + Selection of text is handled by the QTextCursor class, which provides + functionality for creating selections, retrieving the text contents or + deleting selections. You can retrieve the object that corresponds with + the user-visible cursor using the textCursor() method. If you want to set + a selection in QTextEdit just create one on a QTextCursor object and + then make that cursor the visible cursor using setTextCursor(). The selection + can be copied to the clipboard with copy(), or cut to the clipboard with + cut(). The entire text can be selected using selectAll(). + + When the cursor is moved and the underlying formatting attributes change, + the currentCharFormatChanged() signal is emitted to reflect the new attributes + at the new cursor position. + + QTextEdit holds a QTextDocument object which can be retrieved using the + document() method. You can also set your own document object using setDocument(). + QTextDocument emits a textChanged() signal if the text changes and it also + provides a isModified() function which will return true if the text has been + modified since it was either loaded or since the last call to setModified + with false as argument. In addition it provides methods for undo and redo. + + \section2 Drag and Drop + + QTextEdit also supports custom drag and drop behavior. By default, + QTextEdit will insert plain text, HTML and rich text when the user drops + data of these MIME types onto a document. Reimplement + canInsertFromMimeData() and insertFromMimeData() to add support for + additional MIME types. + + For example, to allow the user to drag and drop an image onto a QTextEdit, + you could the implement these functions in the following way: + + \snippet doc/src/snippets/textdocument-imagedrop/textedit.cpp 0 + + We add support for image MIME types by returning true. For all other + MIME types, we use the default implementation. + + \snippet doc/src/snippets/textdocument-imagedrop/textedit.cpp 1 + + We unpack the image from the QVariant held by the MIME source and insert + it into the document as a resource. + + \section2 Editing Key Bindings + + The list of key bindings which are implemented for editing: + \table + \header \i Keypresses \i Action + \row \i Backspace \i Deletes the character to the left of the cursor. + \row \i Delete \i Deletes the character to the right of the cursor. + \row \i Ctrl+C \i Copy the selected text to the clipboard. + \row \i Ctrl+Insert \i Copy the selected text to the clipboard. + \row \i Ctrl+K \i Deletes to the end of the line. + \row \i Ctrl+V \i Pastes the clipboard text into text edit. + \row \i Shift+Insert \i Pastes the clipboard text into text edit. + \row \i Ctrl+X \i Deletes the selected text and copies it to the clipboard. + \row \i Shift+Delete \i Deletes the selected text and copies it to the clipboard. + \row \i Ctrl+Z \i Undoes the last operation. + \row \i Ctrl+Y \i Redoes the last operation. + \row \i Left \i Moves the cursor one character to the left. + \row \i Ctrl+Left \i Moves the cursor one word to the left. + \row \i Right \i Moves the cursor one character to the right. + \row \i Ctrl+Right \i Moves the cursor one word to the right. + \row \i Up \i Moves the cursor one line up. + \row \i Down \i Moves the cursor one line down. + \row \i PageUp \i Moves the cursor one page up. + \row \i PageDown \i Moves the cursor one page down. + \row \i Home \i Moves the cursor to the beginning of the line. + \row \i Ctrl+Home \i Moves the cursor to the beginning of the text. + \row \i End \i Moves the cursor to the end of the line. + \row \i Ctrl+End \i Moves the cursor to the end of the text. + \row \i Alt+Wheel \i Scrolls the page horizontally (the Wheel is the mouse wheel). + \endtable + + To select (mark) text hold down the Shift key whilst pressing one + of the movement keystrokes, for example, \e{Shift+Right} + will select the character to the right, and \e{Shift+Ctrl+Right} will select the word to the right, etc. + + \sa QTextDocument, QTextCursor, {Application Example}, + {Syntax Highlighter Example}, {Rich Text Processing} +*/ + +/*! + \property QTextEdit::plainText + \since 4.3 + + This property gets and sets the text editor's contents as plain + text. Previous contents are removed and undo/redo history is reset + when the property is set. + + If the text edit has another content type, it will not be replaced + by plain text if you call toPlainText(). + + By default, for an editor with no contents, this property contains + an empty string. + + \sa html +*/ + +/*! + \property QTextEdit::undoRedoEnabled + \brief whether undo and redo are enabled + + Users are only able to undo or redo actions if this property is + true, and if there is an action that can be undone (or redone). +*/ + +/*! + \enum QTextEdit::LineWrapMode + + \value NoWrap + \value WidgetWidth + \value FixedPixelWidth + \value FixedColumnWidth +*/ + +/*! + \enum QTextEdit::AutoFormattingFlag + + \value AutoNone Don't do any automatic formatting. + \value AutoBulletList Automatically create bullet lists (e.g. when + the user enters an asterisk ('*') in the left most column, or + presses Enter in an existing list item. + \value AutoAll Apply all automatic formatting. Currently only + automatic bullet lists are supported. +*/ + +#ifdef QT3_SUPPORT +/*! + \enum QTextEdit::CursorAction + \compat + + \value MoveBackward + \value MoveForward + \value MoveWordBackward + \value MoveWordForward + \value MoveUp + \value MoveDown + \value MoveLineStart + \value MoveLineEnd + \value MoveHome + \value MoveEnd + \value MovePageUp + \value MovePageDown + + \omitvalue MovePgUp + \omitvalue MovePgDown +*/ +#endif + +/*! + Constructs an empty QTextEdit with parent \a + parent. +*/ +QTextEdit::QTextEdit(QWidget *parent) + : QAbstractScrollArea(*new QTextEditPrivate, parent) +{ + Q_D(QTextEdit); + d->init(); +} + +/*! + \internal +*/ +QTextEdit::QTextEdit(QTextEditPrivate &dd, QWidget *parent) + : QAbstractScrollArea(dd, parent) +{ + Q_D(QTextEdit); + d->init(); +} + +/*! + Constructs a QTextEdit with parent \a parent. The text edit will display + the text \a text. The text is interpreted as html. +*/ +QTextEdit::QTextEdit(const QString &text, QWidget *parent) + : QAbstractScrollArea(*new QTextEditPrivate, parent) +{ + Q_D(QTextEdit); + d->init(text); +} + +#ifdef QT3_SUPPORT +/*! + Use one of the constructors that doesn't take the \a name + argument and then use setObjectName() instead. +*/ +QTextEdit::QTextEdit(QWidget *parent, const char *name) + : QAbstractScrollArea(*new QTextEditPrivate, parent) +{ + Q_D(QTextEdit); + d->init(); + setObjectName(QString::fromAscii(name)); +} +#endif + + +/*! + Destructor. +*/ +QTextEdit::~QTextEdit() +{ +} + +/*! + Returns the point size of the font of the current format. + + \sa setFontFamily() setCurrentFont() setFontPointSize() +*/ +qreal QTextEdit::fontPointSize() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().fontPointSize(); +} + +/*! + Returns the font family of the current format. + + \sa setFontFamily() setCurrentFont() setFontPointSize() +*/ +QString QTextEdit::fontFamily() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().fontFamily(); +} + +/*! + Returns the font weight of the current format. + + \sa setFontWeight() setCurrentFont() setFontPointSize() QFont::Weight +*/ +int QTextEdit::fontWeight() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().fontWeight(); +} + +/*! + Returns true if the font of the current format is underlined; otherwise returns + false. + + \sa setFontUnderline() +*/ +bool QTextEdit::fontUnderline() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().fontUnderline(); +} + +/*! + Returns true if the font of the current format is italic; otherwise returns + false. + + \sa setFontItalic() +*/ +bool QTextEdit::fontItalic() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().fontItalic(); +} + +/*! + Returns the text color of the current format. + + \sa setTextColor() +*/ +QColor QTextEdit::textColor() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().foreground().color(); +} + +/*! + \since 4.4 + + Returns the text background color of the current format. + + \sa setTextBackgroundColor() +*/ +QColor QTextEdit::textBackgroundColor() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().background().color(); +} + +/*! + Returns the font of the current format. + + \sa setCurrentFont() setFontFamily() setFontPointSize() +*/ +QFont QTextEdit::currentFont() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().charFormat().font(); +} + +/*! + Sets the alignment of the current paragraph to \a a. Valid + alignments are Qt::AlignLeft, Qt::AlignRight, + Qt::AlignJustify and Qt::AlignCenter (which centers + horizontally). +*/ +void QTextEdit::setAlignment(Qt::Alignment a) +{ + Q_D(QTextEdit); + QTextBlockFormat fmt; + fmt.setAlignment(a); + QTextCursor cursor = d->control->textCursor(); + cursor.mergeBlockFormat(fmt); + d->control->setTextCursor(cursor); +} + +/*! + Returns the alignment of the current paragraph. + + \sa setAlignment() +*/ +Qt::Alignment QTextEdit::alignment() const +{ + Q_D(const QTextEdit); + return d->control->textCursor().blockFormat().alignment(); +} + +/*! + Makes \a document the new document of the text editor. + + \note The editor \e{does not take ownership of the document} unless it + is the document's parent object. The parent object of the provided document + remains the owner of the object. + + If the current document is a child of the text editor, then it is deleted. + + \sa document() +*/ +void QTextEdit::setDocument(QTextDocument *document) +{ + Q_D(QTextEdit); + d->control->setDocument(document); + d->updateDefaultTextOption(); + d->relayoutDocument(); +} + +/*! + Returns a pointer to the underlying document. + + \sa setDocument() +*/ +QTextDocument *QTextEdit::document() const +{ + Q_D(const QTextEdit); + return d->control->document(); +} + +/*! + Sets the visible \a cursor. +*/ +void QTextEdit::setTextCursor(const QTextCursor &cursor) +{ + Q_D(QTextEdit); + d->control->setTextCursor(cursor); +} + +/*! + Returns a copy of the QTextCursor that represents the currently visible cursor. + Note that changes on the returned cursor do not affect QTextEdit's cursor; use + setTextCursor() to update the visible cursor. + */ +QTextCursor QTextEdit::textCursor() const +{ + Q_D(const QTextEdit); + return d->control->textCursor(); +} + +/*! + Sets the font family of the current format to \a fontFamily. + + \sa fontFamily() setCurrentFont() +*/ +void QTextEdit::setFontFamily(const QString &fontFamily) +{ + QTextCharFormat fmt; + fmt.setFontFamily(fontFamily); + mergeCurrentCharFormat(fmt); +} + +/*! + Sets the point size of the current format to \a s. + + Note that if \a s is zero or negative, the behavior of this + function is not defined. + + \sa fontPointSize() setCurrentFont() setFontFamily() +*/ +void QTextEdit::setFontPointSize(qreal s) +{ + QTextCharFormat fmt; + fmt.setFontPointSize(s); + mergeCurrentCharFormat(fmt); +} + +/*! + \fn void QTextEdit::setFontWeight(int weight) + + Sets the font weight of the current format to the given \a weight, + where the value used is in the range defined by the QFont::Weight + enum. + + \sa fontWeight(), setCurrentFont(), setFontFamily() +*/ +void QTextEdit::setFontWeight(int w) +{ + QTextCharFormat fmt; + fmt.setFontWeight(w); + mergeCurrentCharFormat(fmt); +} + +/*! + If \a underline is true, sets the current format to underline; + otherwise sets the current format to non-underline. + + \sa fontUnderline() +*/ +void QTextEdit::setFontUnderline(bool underline) +{ + QTextCharFormat fmt; + fmt.setFontUnderline(underline); + mergeCurrentCharFormat(fmt); +} + +/*! + If \a italic is true, sets the current format to italic; + otherwise sets the current format to non-italic. + + \sa fontItalic() +*/ +void QTextEdit::setFontItalic(bool italic) +{ + QTextCharFormat fmt; + fmt.setFontItalic(italic); + mergeCurrentCharFormat(fmt); +} + +/*! + Sets the text color of the current format to \a c. + + \sa textColor() +*/ +void QTextEdit::setTextColor(const QColor &c) +{ + QTextCharFormat fmt; + fmt.setForeground(QBrush(c)); + mergeCurrentCharFormat(fmt); +} + +/*! + \since 4.4 + + Sets the text background color of the current format to \a c. + + \sa textBackgroundColor() +*/ +void QTextEdit::setTextBackgroundColor(const QColor &c) +{ + QTextCharFormat fmt; + fmt.setBackground(QBrush(c)); + mergeCurrentCharFormat(fmt); +} + +/*! + Sets the font of the current format to \a f. + + \sa currentFont() setFontPointSize() setFontFamily() +*/ +void QTextEdit::setCurrentFont(const QFont &f) +{ + QTextCharFormat fmt; + fmt.setFont(f); + mergeCurrentCharFormat(fmt); +} + +/*! + \since 4.2 + + Undoes the last operation. + + If there is no operation to undo, i.e. there is no undo step in + the undo/redo history, nothing happens. + + \sa redo() +*/ +void QTextEdit::undo() +{ + Q_D(QTextEdit); + d->control->undo(); +} + +void QTextEdit::redo() +{ + Q_D(QTextEdit); + d->control->redo(); +} + +/*! + \fn void QTextEdit::undo() const + \fn void QTextEdit::redo() const + \overload + + Use the non-const overload instead. +*/ + +/*! + \fn void QTextEdit::redo() + \since 4.2 + + Redoes the last operation. + + If there is no operation to redo, i.e. there is no redo step in + the undo/redo history, nothing happens. + + \sa undo() +*/ + +#ifndef QT_NO_CLIPBOARD +/*! + Copies the selected text to the clipboard and deletes it from + the text edit. + + If there is no selected text nothing happens. + + \sa copy() paste() +*/ + +void QTextEdit::cut() +{ + Q_D(QTextEdit); + d->control->cut(); +} + +/*! + Copies any selected text to the clipboard. + + \sa copyAvailable() +*/ + +void QTextEdit::copy() +{ + Q_D(QTextEdit); + d->control->copy(); +} + +/*! + Pastes the text from the clipboard into the text edit at the + current cursor position. + + If there is no text in the clipboard nothing happens. + + To change the behavior of this function, i.e. to modify what + QTextEdit can paste and how it is being pasted, reimplement the + virtual canInsertFromMimeData() and insertFromMimeData() + functions. + + \sa cut() copy() +*/ + +void QTextEdit::paste() +{ + Q_D(QTextEdit); + d->control->paste(); +} +#endif + +/*! + Deletes all the text in the text edit. + + Note that the undo/redo history is cleared by this function. + + \sa cut() setPlainText() setHtml() +*/ +void QTextEdit::clear() +{ + Q_D(QTextEdit); + // clears and sets empty content + d->control->clear(); +} + + +/*! + Selects all text. + + \sa copy() cut() textCursor() + */ +void QTextEdit::selectAll() +{ + Q_D(QTextEdit); + d->control->selectAll(); +} + +/*! \internal +*/ +bool QTextEdit::event(QEvent *e) +{ + Q_D(QTextEdit); +#ifndef QT_NO_CONTEXTMENU + if (e->type() == QEvent::ContextMenu + && static_cast<QContextMenuEvent *>(e)->reason() == QContextMenuEvent::Keyboard) { + Q_D(QTextEdit); + ensureCursorVisible(); + const QPoint cursorPos = cursorRect().center(); + QContextMenuEvent ce(QContextMenuEvent::Keyboard, cursorPos, d->viewport->mapToGlobal(cursorPos)); + ce.setAccepted(e->isAccepted()); + const bool result = QAbstractScrollArea::event(&ce); + e->setAccepted(ce.isAccepted()); + return result; + } else if (e->type() == QEvent::ShortcutOverride + || e->type() == QEvent::ToolTip) { + d->sendControlEvent(e); + } +#endif // QT_NO_CONTEXTMENU +#ifdef QT_KEYPAD_NAVIGATION + if (e->type() == QEvent::EnterEditFocus || e->type() == QEvent::LeaveEditFocus) { + if (QApplication::keypadNavigationEnabled()) + d->sendControlEvent(e); + } +#endif + return QAbstractScrollArea::event(e); +} + +/*! \internal +*/ + +void QTextEdit::timerEvent(QTimerEvent *e) +{ + Q_D(QTextEdit); + if (e->timerId() == d->autoScrollTimer.timerId()) { + QRect visible = d->viewport->rect(); + QPoint pos; + if (d->inDrag) { + pos = d->autoScrollDragPos; + visible.adjust(qMin(visible.width()/3,20), qMin(visible.height()/3,20), + -qMin(visible.width()/3,20), -qMin(visible.height()/3,20)); + } else { + const QPoint globalPos = QCursor::pos(); + pos = d->viewport->mapFromGlobal(globalPos); + QMouseEvent ev(QEvent::MouseMove, pos, globalPos, Qt::LeftButton, Qt::LeftButton, Qt::NoModifier); + mouseMoveEvent(&ev); + } + int deltaY = qMax(pos.y() - visible.top(), visible.bottom() - pos.y()) - visible.height(); + int deltaX = qMax(pos.x() - visible.left(), visible.right() - pos.x()) - visible.width(); + int delta = qMax(deltaX, deltaY); + if (delta >= 0) { + if (delta < 7) + delta = 7; + int timeout = 4900 / (delta * delta); + d->autoScrollTimer.start(timeout, this); + + if (deltaY > 0) + d->vbar->triggerAction(pos.y() < visible.center().y() ? + QAbstractSlider::SliderSingleStepSub + : QAbstractSlider::SliderSingleStepAdd); + if (deltaX > 0) + d->hbar->triggerAction(pos.x() < visible.center().x() ? + QAbstractSlider::SliderSingleStepSub + : QAbstractSlider::SliderSingleStepAdd); + } + } +#ifdef QT_KEYPAD_NAVIGATION + else if (e->timerId() == d->deleteAllTimer.timerId()) { + d->deleteAllTimer.stop(); + clear(); + } +#endif +} + +/*! + Changes the text of the text edit to the string \a text. + Any previous text is removed. + + \a text is interpreted as plain text. + + Note that the undo/redo history is cleared by this function. + + \sa toPlainText() +*/ + +void QTextEdit::setPlainText(const QString &text) +{ + Q_D(QTextEdit); + d->control->setPlainText(text); + d->preferRichText = false; +} + +/*! + \fn QString QTextEdit::toPlainText() const + + Returns the text of the text edit as plain text. + + \sa QTextEdit::setPlainText() + */ + + +/*! + \property QTextEdit::html + + This property provides an HTML interface to the text of the text edit. + + toHtml() returns the text of the text edit as html. + + setHtml() changes the text of the text edit. Any previous text is + removed and the undo/redo history is cleared. The input text is + interpreted as rich text in html format. + + \note It is the responsibility of the caller to make sure that the + text is correctly decoded when a QString containing HTML is created + and passed to setHtml(). + + By default, for a newly-created, empty document, this property contains + text to describe an HTML 4.0 document with no body text. + + \sa {Supported HTML Subset}, plainText +*/ + +#ifndef QT_NO_TEXTHTMLPARSER +void QTextEdit::setHtml(const QString &text) +{ + Q_D(QTextEdit); + d->control->setHtml(text); + d->preferRichText = true; +} +#endif + +/*! \reimp +*/ +void QTextEdit::keyPressEvent(QKeyEvent *e) +{ + Q_D(QTextEdit); + +#ifdef QT_KEYPAD_NAVIGATION + switch (e->key()) { + case Qt::Key_Select: + if (QApplication::keypadNavigationEnabled()) { + // code assumes linksaccessible + editable isn't meaningful + if (d->control->textInteractionFlags() & Qt::TextEditable) { + setEditFocus(!hasEditFocus()); + } else { + if (!hasEditFocus()) + setEditFocus(true); + else { + QTextCursor cursor = d->control->textCursor(); + QTextCharFormat charFmt = cursor.charFormat(); + if (!(d->control->textInteractionFlags() & Qt::LinksAccessibleByKeyboard) + || !cursor.hasSelection() || charFmt.anchorHref().isEmpty()) { + e->accept(); + return; + } + } + } + } + break; + case Qt::Key_Back: + case Qt::Key_No: + if (!QApplication::keypadNavigationEnabled() + || (QApplication::keypadNavigationEnabled() && !hasEditFocus())) { + e->ignore(); + return; + } + break; + default: + if (QApplication::keypadNavigationEnabled()) { + if (!hasEditFocus() && !(e->modifiers() & Qt::ControlModifier)) { + if (e->text()[0].isPrint()) { + setEditFocus(true); + clear(); + } else { + e->ignore(); + return; + } + } + } + break; + } +#endif + + if (!(d->control->textInteractionFlags() & Qt::TextEditable)) { + switch (e->key()) { + case Qt::Key_Space: + e->accept(); + if (e->modifiers() & Qt::ShiftModifier) + d->vbar->triggerAction(QAbstractSlider::SliderPageStepSub); + else + d->vbar->triggerAction(QAbstractSlider::SliderPageStepAdd); + break; + default: + d->sendControlEvent(e); + if (!e->isAccepted() && e->modifiers() == Qt::NoModifier) { + if (e->key() == Qt::Key_Home) { + d->vbar->triggerAction(QAbstractSlider::SliderToMinimum); + e->accept(); + } else if (e->key() == Qt::Key_End) { + d->vbar->triggerAction(QAbstractSlider::SliderToMaximum); + e->accept(); + } + } + if (!e->isAccepted()) { + QAbstractScrollArea::keyPressEvent(e); + } + } + return; + } + +#ifndef QT_NO_SHORTCUT + if (e == QKeySequence::MoveToPreviousPage) { + e->accept(); + d->pageUpDown(QTextCursor::Up, QTextCursor::MoveAnchor); + return; + } else if (e == QKeySequence::MoveToNextPage) { + e->accept(); + d->pageUpDown(QTextCursor::Down, QTextCursor::MoveAnchor); + return; + } else if (e == QKeySequence::SelectPreviousPage) { + e->accept(); + d->pageUpDown(QTextCursor::Up, QTextCursor::KeepAnchor); + return; + } else if (e ==QKeySequence::SelectNextPage) { + e->accept(); + d->pageUpDown(QTextCursor::Down, QTextCursor::KeepAnchor); + return; + } +#endif // QT_NO_SHORTCUT + + { + QTextCursor cursor = d->control->textCursor(); + const QString text = e->text(); + if (cursor.atBlockStart() + && (d->autoFormatting & AutoBulletList) + && (text.length() == 1) + && (text.at(0) == QLatin1Char('-') || text.at(0) == QLatin1Char('*')) + && (!cursor.currentList())) { + + d->createAutoBulletList(); + e->accept(); + return; + } + } + + d->sendControlEvent(e); +#ifdef QT_KEYPAD_NAVIGATION + if (!e->isAccepted()) { + switch (e->key()) { + case Qt::Key_Up: + case Qt::Key_Down: + if (QApplication::keypadNavigationEnabled()) { + // Cursor position didn't change, so we want to leave + // these keys to change focus. + e->ignore(); + return; + } + break; + case Qt::Key_Back: + if (!e->isAutoRepeat()) { + if (QApplication::keypadNavigationEnabled()) { + if (document()->isEmpty() || !(d->control->textInteractionFlags() & Qt::TextEditable)) { + setEditFocus(false); + e->accept(); + } else if (!d->deleteAllTimer.isActive()) { + e->accept(); + d->deleteAllTimer.start(750, this); + } + } else { + e->ignore(); + return; + } + } + break; + default: break; + } + } +#endif +} + +/*! \reimp +*/ +void QTextEdit::keyReleaseEvent(QKeyEvent *e) +{ +#ifdef QT_KEYPAD_NAVIGATION + Q_D(QTextEdit); + if (QApplication::keypadNavigationEnabled()) { + if (!e->isAutoRepeat() && e->key() == Qt::Key_Back + && d->deleteAllTimer.isActive()) { + d->deleteAllTimer.stop(); + QTextCursor cursor = d->control->textCursor(); + QTextBlockFormat blockFmt = cursor.blockFormat(); + + QTextList *list = cursor.currentList(); + if (list && cursor.atBlockStart()) { + list->remove(cursor.block()); + } else if (cursor.atBlockStart() && blockFmt.indent() > 0) { + blockFmt.setIndent(blockFmt.indent() - 1); + cursor.setBlockFormat(blockFmt); + } else { + cursor.deletePreviousChar(); + } + setTextCursor(cursor); + e->accept(); + return; + } + } +#endif + e->ignore(); +} + +/*! + Loads the resource specified by the given \a type and \a name. + + This function is an extension of QTextDocument::loadResource(). + + \sa QTextDocument::loadResource() +*/ +QVariant QTextEdit::loadResource(int type, const QUrl &name) +{ + Q_UNUSED(type); + Q_UNUSED(name); + return QVariant(); +} + +/*! \reimp +*/ +void QTextEdit::resizeEvent(QResizeEvent *e) +{ + Q_D(QTextEdit); + + if (d->lineWrap == NoWrap) { + QTextDocument *doc = d->control->document(); + QVariant alignmentProperty = doc->documentLayout()->property("contentHasAlignment"); + + if (!doc->pageSize().isNull() + && alignmentProperty.type() == QVariant::Bool + && !alignmentProperty.toBool()) { + + d->_q_adjustScrollbars(); + return; + } + } + + if (d->lineWrap != FixedPixelWidth + && e->oldSize().width() != e->size().width()) + d->relayoutDocument(); + else + d->_q_adjustScrollbars(); +} + +void QTextEditPrivate::relayoutDocument() +{ + QTextDocument *doc = control->document(); + QAbstractTextDocumentLayout *layout = doc->documentLayout(); + + if (QTextDocumentLayout *tlayout = qobject_cast<QTextDocumentLayout *>(layout)) { + if (lineWrap == QTextEdit::FixedColumnWidth) + tlayout->setFixedColumnWidth(lineWrapColumnOrWidth); + else + tlayout->setFixedColumnWidth(-1); + } + + QTextDocumentLayout *tlayout = qobject_cast<QTextDocumentLayout *>(layout); + QSize lastUsedSize; + if (tlayout) + lastUsedSize = tlayout->dynamicDocumentSize().toSize(); + else + lastUsedSize = layout->documentSize().toSize(); + + // ignore calls to _q_adjustScrollbars caused by an emission of the + // usedSizeChanged() signal in the layout, as we're calling it + // later on our own anyway (or deliberately not) . + const bool oldIgnoreScrollbarAdjustment = ignoreAutomaticScrollbarAdjustment; + ignoreAutomaticScrollbarAdjustment = true; + + int width = viewport->width(); + if (lineWrap == QTextEdit::FixedPixelWidth) + width = lineWrapColumnOrWidth; + else if (lineWrap == QTextEdit::NoWrap) { + QVariant alignmentProperty = doc->documentLayout()->property("contentHasAlignment"); + if (alignmentProperty.type() == QVariant::Bool && !alignmentProperty.toBool()) { + + width = 0; + } + } + + doc->setPageSize(QSize(width, -1)); + if (tlayout) + tlayout->ensureLayouted(verticalOffset() + viewport->height()); + + ignoreAutomaticScrollbarAdjustment = oldIgnoreScrollbarAdjustment; + + QSize usedSize; + if (tlayout) + usedSize = tlayout->dynamicDocumentSize().toSize(); + else + usedSize = layout->documentSize().toSize(); + + // this is an obscure situation in the layout that can happen: + // if a character at the end of a line is the tallest one and therefore + // influencing the total height of the line and the line right below it + // is always taller though, then it can happen that if due to line breaking + // that tall character wraps into the lower line the document not only shrinks + // horizontally (causing the character to wrap in the first place) but also + // vertically, because the original line is now smaller and the one below kept + // its size. So a layout with less width _can_ take up less vertical space, too. + // If the wider case causes a vertical scroll bar to appear and the narrower one + // (narrower because the vertical scroll bar takes up horizontal space)) to disappear + // again then we have an endless loop, as _q_adjustScrollBars sets new ranges on the + // scroll bars, the QAbstractScrollArea will find out about it and try to show/hide + // the scroll bars again. That's why we try to detect this case here and break out. + // + // (if you change this please also check the layoutingLoop() testcase in + // QTextEdit's autotests) + if (lastUsedSize.isValid() + && !vbar->isHidden() + && viewport->width() < lastUsedSize.width() + && usedSize.height() < lastUsedSize.height() + && usedSize.height() <= viewport->height()) + return; + + _q_adjustScrollbars(); +} + +void QTextEditPrivate::paint(QPainter *p, QPaintEvent *e) +{ + const int xOffset = horizontalOffset(); + const int yOffset = verticalOffset(); + + QRect r = e->rect(); + p->translate(-xOffset, -yOffset); + r.translate(xOffset, yOffset); + + QTextDocument *doc = control->document(); + QTextDocumentLayout *layout = qobject_cast<QTextDocumentLayout *>(doc->documentLayout()); + + // the layout might need to expand the root frame to + // the viewport if NoWrap is set + if (layout) + layout->setViewport(viewport->rect()); + + control->drawContents(p, r, q_func()); + + if (layout) + layout->setViewport(QRect()); +} + +/*! \reimp +*/ +void QTextEdit::paintEvent(QPaintEvent *e) +{ + Q_D(QTextEdit); + QPainter p(d->viewport); + d->paint(&p, e); +} + +void QTextEditPrivate::_q_currentCharFormatChanged(const QTextCharFormat &fmt) +{ + Q_Q(QTextEdit); + emit q->currentCharFormatChanged(fmt); +#ifdef QT3_SUPPORT + // compat signals + emit q->currentFontChanged(fmt.font()); + emit q->currentColorChanged(fmt.foreground().color()); +#endif +} + +void QTextEditPrivate::updateDefaultTextOption() +{ + QTextDocument *doc = control->document(); + + QTextOption opt = doc->defaultTextOption(); + QTextOption::WrapMode oldWrapMode = opt.wrapMode(); + + if (lineWrap == QTextEdit::NoWrap) + opt.setWrapMode(QTextOption::NoWrap); + else + opt.setWrapMode(wordWrap); + + if (opt.wrapMode() != oldWrapMode) + doc->setDefaultTextOption(opt); +} + +/*! \reimp +*/ +void QTextEdit::mousePressEvent(QMouseEvent *e) +{ + Q_D(QTextEdit); +#ifdef QT_KEYPAD_NAVIGATION + if (QApplication::keypadNavigationEnabled() && !hasEditFocus()) + setEditFocus(true); +#endif + d->sendControlEvent(e); +} + +/*! \reimp +*/ +void QTextEdit::mouseMoveEvent(QMouseEvent *e) +{ + Q_D(QTextEdit); + d->inDrag = false; // paranoia + const QPoint pos = e->pos(); + d->sendControlEvent(e); + if (!(e->buttons() & Qt::LeftButton)) + return; + QRect visible = d->viewport->rect(); + if (visible.contains(pos)) + d->autoScrollTimer.stop(); + else if (!d->autoScrollTimer.isActive()) + d->autoScrollTimer.start(100, this); +} + +/*! \reimp +*/ +void QTextEdit::mouseReleaseEvent(QMouseEvent *e) +{ + Q_D(QTextEdit); + d->sendControlEvent(e); + if (d->autoScrollTimer.isActive()) { + d->autoScrollTimer.stop(); + ensureCursorVisible(); + } +} + +/*! \reimp +*/ +void QTextEdit::mouseDoubleClickEvent(QMouseEvent *e) +{ + Q_D(QTextEdit); + d->sendControlEvent(e); +} + +/*! \reimp +*/ +bool QTextEdit::focusNextPrevChild(bool next) +{ + Q_D(const QTextEdit); + if (!d->tabChangesFocus && d->control->textInteractionFlags() & Qt::TextEditable) + return false; + return QAbstractScrollArea::focusNextPrevChild(next); +} + +#ifndef QT_NO_CONTEXTMENU +/*! + \fn void QTextEdit::contextMenuEvent(QContextMenuEvent *event) + + Shows the standard context menu created with createStandardContextMenu(). + + If you do not want the text edit to have a context menu, you can set + its \l contextMenuPolicy to Qt::NoContextMenu. If you want to + customize the context menu, reimplement this function. If you want + to extend the standard context menu, reimplement this function, call + createStandardContextMenu() and extend the menu returned. + + Information about the event is passed in the \a event object. + + \snippet doc/src/snippets/code/src_gui_widgets_qtextedit.cpp 0 +*/ +void QTextEdit::contextMenuEvent(QContextMenuEvent *e) +{ + Q_D(QTextEdit); + d->sendControlEvent(e); +} +#endif // QT_NO_CONTEXTMENU + +#ifndef QT_NO_DRAGANDDROP +/*! \reimp +*/ +void QTextEdit::dragEnterEvent(QDragEnterEvent *e) +{ + Q_D(QTextEdit); + d->inDrag = true; + d->sendControlEvent(e); +} + +/*! \reimp +*/ +void QTextEdit::dragLeaveEvent(QDragLeaveEvent *e) +{ + Q_D(QTextEdit); + d->inDrag = false; + d->autoScrollTimer.stop(); + d->sendControlEvent(e); +} + +/*! \reimp +*/ +void QTextEdit::dragMoveEvent(QDragMoveEvent *e) +{ + Q_D(QTextEdit); + d->autoScrollDragPos = e->pos(); + if (!d->autoScrollTimer.isActive()) + d->autoScrollTimer.start(100, this); + d->sendControlEvent(e); +} + +/*! \reimp +*/ +void QTextEdit::dropEvent(QDropEvent *e) +{ + Q_D(QTextEdit); + d->inDrag = false; + d->autoScrollTimer.stop(); + d->sendControlEvent(e); +} + +#endif // QT_NO_DRAGANDDROP + +/*! \reimp + */ +void QTextEdit::inputMethodEvent(QInputMethodEvent *e) +{ + Q_D(QTextEdit); +#ifdef QT_KEYPAD_NAVIGATION + if (d->control->textInteractionFlags() & Qt::TextEditable + && QApplication::keypadNavigationEnabled() + && !hasEditFocus()) { + setEditFocus(true); + selectAll(); // so text is replaced rather than appended to + } +#endif + d->sendControlEvent(e); +} + +/*!\reimp +*/ +void QTextEdit::scrollContentsBy(int dx, int dy) +{ + Q_D(QTextEdit); + if (isRightToLeft()) + dx = -dx; + d->viewport->scroll(dx, dy); +} + +/*!\reimp +*/ +QVariant QTextEdit::inputMethodQuery(Qt::InputMethodQuery property) const +{ + Q_D(const QTextEdit); + QVariant v = d->control->inputMethodQuery(property); + const QPoint offset(-d->horizontalOffset(), -d->verticalOffset()); + if (v.type() == QVariant::RectF) + v = v.toRectF().toRect().translated(offset); + else if (v.type() == QVariant::PointF) + v = v.toPointF().toPoint() + offset; + else if (v.type() == QVariant::Rect) + v = v.toRect().translated(offset); + else if (v.type() == QVariant::Point) + v = v.toPoint() + offset; + return v; +} + +/*! \reimp +*/ +void QTextEdit::focusInEvent(QFocusEvent *e) +{ + Q_D(QTextEdit); + QAbstractScrollArea::focusInEvent(e); + d->sendControlEvent(e); +} + +/*! \reimp +*/ +void QTextEdit::focusOutEvent(QFocusEvent *e) +{ + Q_D(QTextEdit); + QAbstractScrollArea::focusOutEvent(e); + d->sendControlEvent(e); +} + +/*! \reimp +*/ +void QTextEdit::showEvent(QShowEvent *) +{ + Q_D(QTextEdit); + if (!d->anchorToScrollToWhenVisible.isEmpty()) { + scrollToAnchor(d->anchorToScrollToWhenVisible); + d->anchorToScrollToWhenVisible.clear(); + d->showCursorOnInitialShow = false; + } else if (d->showCursorOnInitialShow) { + d->showCursorOnInitialShow = false; + ensureCursorVisible(); + } +} + +/*! \reimp +*/ +void QTextEdit::changeEvent(QEvent *e) +{ + Q_D(QTextEdit); + QAbstractScrollArea::changeEvent(e); + if (e->type() == QEvent::ApplicationFontChange + || e->type() == QEvent::FontChange) { + d->control->document()->setDefaultFont(font()); + } else if(e->type() == QEvent::ActivationChange) { + if (!isActiveWindow()) + d->autoScrollTimer.stop(); + } else if (e->type() == QEvent::EnabledChange) { + e->setAccepted(isEnabled()); + d->control->setPalette(palette()); + d->sendControlEvent(e); + } else if (e->type() == QEvent::PaletteChange) { + d->control->setPalette(palette()); + } else if (e->type() == QEvent::LayoutDirectionChange) { + d->sendControlEvent(e); + } +} + +/*! \reimp +*/ +#ifndef QT_NO_WHEELEVENT +void QTextEdit::wheelEvent(QWheelEvent *e) +{ + Q_D(QTextEdit); + if (!(d->control->textInteractionFlags() & Qt::TextEditable)) { + if (e->modifiers() & Qt::ControlModifier) { + const int delta = e->delta(); + if (delta < 0) + zoomOut(); + else if (delta > 0) + zoomIn(); + return; + } + } + QAbstractScrollArea::wheelEvent(e); + updateMicroFocus(); +} +#endif + +#ifndef QT_NO_CONTEXTMENU +/*! This function creates the standard context menu which is shown + when the user clicks on the text edit with the right mouse + button. It is called from the default contextMenuEvent() handler. + The popup menu's ownership is transferred to the caller. + + We recommend that you use the createStandardContextMenu(QPoint) version instead + which will enable the actions that are sensitive to where the user clicked. +*/ + +QMenu *QTextEdit::createStandardContextMenu() +{ + Q_D(QTextEdit); + return d->control->createStandardContextMenu(QPointF(), this); +} + +/*! + \since 4.4 + This function creates the standard context menu which is shown + when the user clicks on the text edit with the right mouse + button. It is called from the default contextMenuEvent() handler + and it takes the \a position of where the mouse click was. + This can enable actions that are sensitive to the position where the user clicked. + The popup menu's ownership is transferred to the caller. +*/ + +QMenu *QTextEdit::createStandardContextMenu(const QPoint &position) +{ + Q_D(QTextEdit); + return d->control->createStandardContextMenu(position, this); +} +#endif // QT_NO_CONTEXTMENU + +/*! + returns a QTextCursor at position \a pos (in viewport coordinates). +*/ +QTextCursor QTextEdit::cursorForPosition(const QPoint &pos) const +{ + Q_D(const QTextEdit); + return d->control->cursorForPosition(d->mapToContents(pos)); +} + +/*! + returns a rectangle (in viewport coordinates) that includes the + \a cursor. + */ +QRect QTextEdit::cursorRect(const QTextCursor &cursor) const +{ + Q_D(const QTextEdit); + if (cursor.isNull()) + return QRect(); + + QRect r = d->control->cursorRect(cursor).toRect(); + r.translate(-d->horizontalOffset(),-d->verticalOffset()); + return r; +} + +/*! + returns a rectangle (in viewport coordinates) that includes the + cursor of the text edit. + */ +QRect QTextEdit::cursorRect() const +{ + Q_D(const QTextEdit); + QRect r = d->control->cursorRect().toRect(); + r.translate(-d->horizontalOffset(),-d->verticalOffset()); + return r; +} + + +/*! + Returns the reference of the anchor at position \a pos, or an + empty string if no anchor exists at that point. +*/ +QString QTextEdit::anchorAt(const QPoint& pos) const +{ + Q_D(const QTextEdit); + return d->control->anchorAt(d->mapToContents(pos)); +} + +/*! + \property QTextEdit::overwriteMode + \since 4.1 + \brief whether text entered by the user will overwrite existing text + + As with many text editors, the text editor widget can be configured + to insert or overwrite existing text with new text entered by the user. + + If this property is true, existing text is overwritten, character-for-character + by new text; otherwise, text is inserted at the cursor position, displacing + existing text. + + By default, this property is false (new text does not overwrite existing text). +*/ + +bool QTextEdit::overwriteMode() const +{ + Q_D(const QTextEdit); + return d->control->overwriteMode(); +} + +void QTextEdit::setOverwriteMode(bool overwrite) +{ + Q_D(QTextEdit); + d->control->setOverwriteMode(overwrite); +} + +/*! + \property QTextEdit::tabStopWidth + \brief the tab stop width in pixels + \since 4.1 + + By default, this property contains a value of 80. +*/ + +int QTextEdit::tabStopWidth() const +{ + Q_D(const QTextEdit); + return qRound(d->control->document()->defaultTextOption().tabStop()); +} + +void QTextEdit::setTabStopWidth(int width) +{ + Q_D(QTextEdit); + QTextOption opt = d->control->document()->defaultTextOption(); + if (opt.tabStop() == width || width < 0) + return; + opt.setTabStop(width); + d->control->document()->setDefaultTextOption(opt); +} + +/*! + \since 4.2 + \property QTextEdit::cursorWidth + + This property specifies the width of the cursor in pixels. The default value is 1. +*/ +int QTextEdit::cursorWidth() const +{ + Q_D(const QTextEdit); + return d->control->cursorWidth(); +} + +void QTextEdit::setCursorWidth(int width) +{ + Q_D(QTextEdit); + d->control->setCursorWidth(width); +} + +/*! + \property QTextEdit::acceptRichText + \brief whether the text edit accepts rich text insertions by the user + \since 4.1 + + When this propery is set to false text edit will accept only + plain text input from the user. For example through clipboard or drag and drop. + + This property's default is true. +*/ + +bool QTextEdit::acceptRichText() const +{ + Q_D(const QTextEdit); + return d->control->acceptRichText(); +} + +void QTextEdit::setAcceptRichText(bool accept) +{ + Q_D(QTextEdit); + d->control->setAcceptRichText(accept); +} + +/*! + \class QTextEdit::ExtraSelection + \since 4.2 + \brief The QTextEdit::ExtraSelection structure provides a way of specifying a + character format for a given selection in a document +*/ + +/*! + \variable QTextEdit::ExtraSelection::cursor + A cursor that contains a selection in a QTextDocument +*/ + +/*! + \variable QTextEdit::ExtraSelection::format + A format that is used to specify a foreground or background brush/color + for the selection. +*/ + +/*! + \since 4.2 + This function allows temporarily marking certain regions in the document + with a given color, specified as \a selections. This can be useful for + example in a programming editor to mark a whole line of text with a given + background color to indicate the existence of a breakpoint. + + \sa QTextEdit::ExtraSelection, extraSelections() +*/ +void QTextEdit::setExtraSelections(const QList<ExtraSelection> &selections) +{ + Q_D(QTextEdit); + d->control->setExtraSelections(selections); +} + +/*! + \since 4.2 + Returns previously set extra selections. + + \sa setExtraSelections() +*/ +QList<QTextEdit::ExtraSelection> QTextEdit::extraSelections() const +{ + Q_D(const QTextEdit); + return d->control->extraSelections(); +} + +/*! + This function returns a new MIME data object to represent the contents + of the text edit's current selection. It is called when the selection needs + to be encapsulated into a new QMimeData object; for example, when a drag + and drop operation is started, or when data is copyied to the clipboard. + + If you reimplement this function, note that the ownership of the returned + QMimeData object is passed to the caller. The selection can be retrieved + by using the textCursor() function. +*/ +QMimeData *QTextEdit::createMimeDataFromSelection() const +{ + Q_D(const QTextEdit); + return d->control->QTextControl::createMimeDataFromSelection(); +} + +/*! + This function returns true if the contents of the MIME data object, specified + by \a source, can be decoded and inserted into the document. It is called + for example when during a drag operation the mouse enters this widget and it + is necessary to determine whether it is possible to accept the drag and drop + operation. + + Reimplement this function to enable drag and drop support for additional MIME types. + */ +bool QTextEdit::canInsertFromMimeData(const QMimeData *source) const +{ + Q_D(const QTextEdit); + return d->control->QTextControl::canInsertFromMimeData(source); +} + +/*! + This function inserts the contents of the MIME data object, specified + by \a source, into the text edit at the current cursor position. It is + called whenever text is inserted as the result of a clipboard paste + operation, or when the text edit accepts data from a drag and drop + operation. + + Reimplement this function to enable drag and drop support for additional MIME types. + */ +void QTextEdit::insertFromMimeData(const QMimeData *source) +{ + Q_D(QTextEdit); + d->control->QTextControl::insertFromMimeData(source); +} + +/*! + \property QTextEdit::readOnly + \brief whether the text edit is read-only + + In a read-only text edit the user can only navigate through the + text and select text; modifying the text is not possible. + + This property's default is false. +*/ + +bool QTextEdit::isReadOnly() const +{ + Q_D(const QTextEdit); + return !(d->control->textInteractionFlags() & Qt::TextEditable); +} + +void QTextEdit::setReadOnly(bool ro) +{ + Q_D(QTextEdit); + Qt::TextInteractionFlags flags = Qt::NoTextInteraction; + if (ro) { + flags = Qt::TextSelectableByMouse; +#ifndef QT_NO_TEXTBROWSER + if (qobject_cast<QTextBrowser *>(this)) + flags |= Qt::TextBrowserInteraction; +#endif + } else { + flags = Qt::TextEditorInteraction; + } + setAttribute(Qt::WA_InputMethodEnabled, !ro); + d->control->setTextInteractionFlags(flags); +} + +/*! + \property QTextEdit::textInteractionFlags + \since 4.2 + + Specifies how the widget should interact with user input. + + The default value depends on whether the QTextEdit is read-only + or editable, and whether it is a QTextBrowser or not. +*/ + +void QTextEdit::setTextInteractionFlags(Qt::TextInteractionFlags flags) +{ + Q_D(QTextEdit); + d->control->setTextInteractionFlags(flags); +} + +Qt::TextInteractionFlags QTextEdit::textInteractionFlags() const +{ + Q_D(const QTextEdit); + return d->control->textInteractionFlags(); +} + +/*! + Merges the properties specified in \a modifier into the current character + format by calling QTextCursor::mergeCharFormat on the editor's cursor. + If the editor has a selection then the properties of \a modifier are + directly applied to the selection. + + \sa QTextCursor::mergeCharFormat() + */ +void QTextEdit::mergeCurrentCharFormat(const QTextCharFormat &modifier) +{ + Q_D(QTextEdit); + d->control->mergeCurrentCharFormat(modifier); +} + +/*! + Sets the char format that is be used when inserting new text to \a + format by calling QTextCursor::setCharFormat() on the editor's + cursor. If the editor has a selection then the char format is + directly applied to the selection. + */ +void QTextEdit::setCurrentCharFormat(const QTextCharFormat &format) +{ + Q_D(QTextEdit); + d->control->setCurrentCharFormat(format); +} + +/*! + Returns the char format that is used when inserting new text. + */ +QTextCharFormat QTextEdit::currentCharFormat() const +{ + Q_D(const QTextEdit); + return d->control->currentCharFormat(); +} + +/*! + \property QTextEdit::autoFormatting + \brief the enabled set of auto formatting features + + The value can be any combination of the values in the + AutoFormattingFlag enum. The default is AutoNone. Choose + AutoAll to enable all automatic formatting. + + Currently, the only automatic formatting feature provided is + AutoBulletList; future versions of Qt may offer more. +*/ + +QTextEdit::AutoFormatting QTextEdit::autoFormatting() const +{ + Q_D(const QTextEdit); + return d->autoFormatting; +} + +void QTextEdit::setAutoFormatting(AutoFormatting features) +{ + Q_D(QTextEdit); + d->autoFormatting = features; +} + +/*! + Convenience slot that inserts \a text at the current + cursor position. + + It is equivalent to + + \snippet doc/src/snippets/code/src_gui_widgets_qtextedit.cpp 1 + */ +void QTextEdit::insertPlainText(const QString &text) +{ + Q_D(QTextEdit); + d->control->insertPlainText(text); +} + +/*! + Convenience slot that inserts \a text which is assumed to be of + html formatting at the current cursor position. + + It is equivalent to: + + \snippet doc/src/snippets/code/src_gui_widgets_qtextedit.cpp 2 + + \note When using this function with a style sheet, the style sheet will + only apply to the current block in the document. In order to apply a style + sheet throughout a document, use QTextDocument::setDefaultStyleSheet() + instead. + */ +#ifndef QT_NO_TEXTHTMLPARSER +void QTextEdit::insertHtml(const QString &text) +{ + Q_D(QTextEdit); + d->control->insertHtml(text); +} +#endif // QT_NO_TEXTHTMLPARSER + +/*! + Scrolls the text edit so that the anchor with the given \a name is + visible; does nothing if the \a name is empty, or is already + visible, or isn't found. +*/ +void QTextEdit::scrollToAnchor(const QString &name) +{ + Q_D(QTextEdit); + if (name.isEmpty()) + return; + + if (!isVisible()) { + d->anchorToScrollToWhenVisible = name; + return; + } + + QPointF p = d->control->anchorPosition(name); + const int newPosition = qRound(p.y()); + if ( d->vbar->maximum() < newPosition ) + d->_q_adjustScrollbars(); + d->vbar->setValue(newPosition); +} + +/*! + \fn QTextEdit::zoomIn(int range) + + Zooms in on the text by making the base font size \a range + points larger and recalculating all font sizes to be the new size. + This does not change the size of any images. + + \sa zoomOut() +*/ +void QTextEdit::zoomIn(int range) +{ + QFont f = font(); + const int newSize = f.pointSize() + range; + if (newSize <= 0) + return; + f.setPointSize(newSize); + setFont(f); +} + +/*! + \fn QTextEdit::zoomOut(int range) + + \overload + + Zooms out on the text by making the base font size \a range points + smaller and recalculating all font sizes to be the new size. This + does not change the size of any images. + + \sa zoomIn() +*/ +void QTextEdit::zoomOut(int range) +{ + zoomIn(-range); +} + +/*! + \since 4.2 + Moves the cursor by performing the given \a operation. + + If \a mode is QTextCursor::KeepAnchor, the cursor selects the text it moves over. + This is the same effect that the user achieves when they hold down the Shift key + and move the cursor with the cursor keys. + + \sa QTextCursor::movePosition() +*/ +void QTextEdit::moveCursor(QTextCursor::MoveOperation operation, QTextCursor::MoveMode mode) +{ + Q_D(QTextEdit); + d->control->moveCursor(operation, mode); +} + +/*! + \since 4.2 + Returns whether text can be pasted from the clipboard into the textedit. +*/ +bool QTextEdit::canPaste() const +{ + Q_D(const QTextEdit); + return d->control->canPaste(); +} + +#ifndef QT_NO_PRINTER +/*! + \since 4.3 + Convenience function to print the text edit's document to the given \a printer. This + is equivalent to calling the print method on the document directly except that this + function also supports QPrinter::Selection as print range. + + \sa QTextDocument::print() +*/ +void QTextEdit::print(QPrinter *printer) const +{ + Q_D(const QTextEdit); + d->control->print(printer); +} +#endif // QT _NO_PRINTER + +/*! \property QTextEdit::tabChangesFocus + \brief whether \gui Tab changes focus or is accepted as input + + In some occasions text edits should not allow the user to input + tabulators or change indentation using the \gui Tab key, as this breaks + the focus chain. The default is false. + +*/ + +bool QTextEdit::tabChangesFocus() const +{ + Q_D(const QTextEdit); + return d->tabChangesFocus; +} + +void QTextEdit::setTabChangesFocus(bool b) +{ + Q_D(QTextEdit); + d->tabChangesFocus = b; +} + +/*! + \property QTextEdit::documentTitle + \brief the title of the document parsed from the text. + + By default, for a newly-created, empty document, this property contains + an empty string. +*/ + +/*! + \property QTextEdit::lineWrapMode + \brief the line wrap mode + + The default mode is WidgetWidth which causes words to be + wrapped at the right edge of the text edit. Wrapping occurs at + whitespace, keeping whole words intact. If you want wrapping to + occur within words use setWordWrapMode(). If you set a wrap mode of + FixedPixelWidth or FixedColumnWidth you should also call + setLineWrapColumnOrWidth() with the width you want. + + \sa lineWrapColumnOrWidth +*/ + +QTextEdit::LineWrapMode QTextEdit::lineWrapMode() const +{ + Q_D(const QTextEdit); + return d->lineWrap; +} + +void QTextEdit::setLineWrapMode(LineWrapMode wrap) +{ + Q_D(QTextEdit); + if (d->lineWrap == wrap) + return; + d->lineWrap = wrap; + d->updateDefaultTextOption(); + d->relayoutDocument(); +} + +/*! + \property QTextEdit::lineWrapColumnOrWidth + \brief the position (in pixels or columns depending on the wrap mode) where text will be wrapped + + If the wrap mode is FixedPixelWidth, the value is the number of + pixels from the left edge of the text edit at which text should be + wrapped. If the wrap mode is FixedColumnWidth, the value is the + column number (in character columns) from the left edge of the + text edit at which text should be wrapped. + + By default, this property contains a value of 0. + + \sa lineWrapMode +*/ + +int QTextEdit::lineWrapColumnOrWidth() const +{ + Q_D(const QTextEdit); + return d->lineWrapColumnOrWidth; +} + +void QTextEdit::setLineWrapColumnOrWidth(int w) +{ + Q_D(QTextEdit); + d->lineWrapColumnOrWidth = w; + d->relayoutDocument(); +} + +/*! + \property QTextEdit::wordWrapMode + \brief the mode QTextEdit will use when wrapping text by words + + By default, this property is set to QTextOption::WrapAtWordBoundaryOrAnywhere. + + \sa QTextOption::WrapMode +*/ + +QTextOption::WrapMode QTextEdit::wordWrapMode() const +{ + Q_D(const QTextEdit); + return d->wordWrap; +} + +void QTextEdit::setWordWrapMode(QTextOption::WrapMode mode) +{ + Q_D(QTextEdit); + if (mode == d->wordWrap) + return; + d->wordWrap = mode; + d->updateDefaultTextOption(); +} + +/*! + Finds the next occurrence of the string, \a exp, using the given + \a options. Returns true if \a exp was found and changes the + cursor to select the match; otherwise returns false. +*/ +bool QTextEdit::find(const QString &exp, QTextDocument::FindFlags options) +{ + Q_D(QTextEdit); + return d->control->find(exp, options); +} + +/*! + \fn void QTextEdit::copyAvailable(bool yes) + + This signal is emitted when text is selected or de-selected in the + text edit. + + When text is selected this signal will be emitted with \a yes set + to true. If no text has been selected or if the selected text is + de-selected this signal is emitted with \a yes set to false. + + If \a yes is true then copy() can be used to copy the selection to + the clipboard. If \a yes is false then copy() does nothing. + + \sa selectionChanged() +*/ + +/*! + \fn void QTextEdit::currentCharFormatChanged(const QTextCharFormat &f) + + This signal is emitted if the current character format has changed, for + example caused by a change of the cursor position. + + The new format is \a f. + + \sa setCurrentCharFormat() +*/ + +/*! + \fn void QTextEdit::selectionChanged() + + This signal is emitted whenever the selection changes. + + \sa copyAvailable() +*/ + +/*! + \fn void QTextEdit::cursorPositionChanged() + + This signal is emitted whenever the position of the + cursor changed. +*/ + +/*! + \since 4.2 + + Sets the text edit's \a text. The text can be plain text or HTML + and the text edit will try to guess the right format. + + Use setHtml() or setPlainText() directly to avoid text edit's guessing. +*/ +void QTextEdit::setText(const QString &text) +{ + Q_D(QTextEdit); + Qt::TextFormat format = d->textFormat; + if (d->textFormat == Qt::AutoText) + format = Qt::mightBeRichText(text) ? Qt::RichText : Qt::PlainText; +#ifndef QT_NO_TEXTHTMLPARSER + if (format == Qt::RichText || format == Qt::LogText) + setHtml(text); + else +#endif + setPlainText(text); +} + +#ifdef QT3_SUPPORT +/*! + Use the QTextCursor class instead. +*/ +void QTextEdit::moveCursor(CursorAction action, QTextCursor::MoveMode mode) +{ + Q_D(QTextEdit); + if (action == MovePageUp) { + d->pageUpDown(QTextCursor::Up, mode); + return; + } else if (action == MovePageDown) { + d->pageUpDown(QTextCursor::Down, mode); + return; + } + + QTextCursor cursor = d->control->textCursor(); + QTextCursor::MoveOperation op = QTextCursor::NoMove; + switch (action) { + case MoveBackward: op = QTextCursor::Left; break; + case MoveForward: op = QTextCursor::Right; break; + case MoveWordBackward: op = QTextCursor::WordLeft; break; + case MoveWordForward: op = QTextCursor::WordRight; break; + case MoveUp: op = QTextCursor::Up; break; + case MoveDown: op = QTextCursor::Down; break; + case MoveLineStart: op = QTextCursor::StartOfLine; break; + case MoveLineEnd: op = QTextCursor::EndOfLine; break; + case MoveHome: op = QTextCursor::Start; break; + case MoveEnd: op = QTextCursor::End; break; + default: return; + } + cursor.movePosition(op, mode); + d->control->setTextCursor(cursor); +} + +/*! + Use the QTextCursor class instead. +*/ +void QTextEdit::moveCursor(CursorAction action, bool select) +{ + moveCursor(action, select ? QTextCursor::KeepAnchor : QTextCursor::MoveAnchor); +} + +/*! + Executes keyboard action \a action. + + Use the QTextCursor class instead. + + \sa textCursor() +*/ +void QTextEdit::doKeyboardAction(KeyboardAction action) +{ + Q_D(QTextEdit); + QTextCursor cursor = d->control->textCursor(); + switch (action) { + case ActionBackspace: cursor.deletePreviousChar(); break; + case ActionDelete: cursor.deleteChar(); break; + case ActionReturn: cursor.insertBlock(); break; + case ActionKill: { + QTextBlock block = cursor.block(); + if (cursor.position() == block.position() + block.length() - 2) + cursor.movePosition(QTextCursor::Right, QTextCursor::KeepAnchor); + else + cursor.movePosition(QTextCursor::EndOfBlock, QTextCursor::KeepAnchor); + cursor.deleteChar(); + break; + } + case ActionWordBackspace: + cursor.movePosition(QTextCursor::PreviousWord, QTextCursor::KeepAnchor); + cursor.deletePreviousChar(); + break; + case ActionWordDelete: + cursor.movePosition(QTextCursor::EndOfWord, QTextCursor::KeepAnchor); + cursor.deleteChar(); + break; + } + d->control->setTextCursor(cursor); +} + +/*! + Returns all the text in the text edit as plain text. +*/ +QString QTextEdit::text() const +{ + Q_D(const QTextEdit); + if (d->textFormat == Qt::RichText || d->textFormat == Qt::LogText || (d->textFormat == Qt::AutoText && d->preferRichText)) + return d->control->toHtml(); + else + return d->control->toPlainText(); +} + + +/*! + Sets the text format to format \a f. + + \sa textFormat() +*/ +void QTextEdit::setTextFormat(Qt::TextFormat f) +{ + Q_D(QTextEdit); + d->textFormat = f; +} + +/*! + Returns the text format. + + \sa setTextFormat() +*/ +Qt::TextFormat QTextEdit::textFormat() const +{ + Q_D(const QTextEdit); + return d->textFormat; +} + +#endif // QT3_SUPPORT + +/*! + Appends a new paragraph with \a text to the end of the text edit. + + \note The new paragraph appended will have the same character format and + block format as the current paragraph, determined by the position of the cursor. + + \sa currentCharFormat(), QTextCursor::blockFormat() +*/ + +void QTextEdit::append(const QString &text) +{ + Q_D(QTextEdit); + QTextBlock lastBlock = d->control->document()->lastBlock(); + const bool atBottom = isReadOnly() ? d->verticalOffset() >= d->vbar->maximum() : + d->control->textCursor().atEnd(); + d->control->append(text); + if (atBottom) + d->vbar->setValue(d->vbar->maximum()); +} + +/*! + Ensures that the cursor is visible by scrolling the text edit if + necessary. +*/ +void QTextEdit::ensureCursorVisible() +{ + Q_D(QTextEdit); + d->control->ensureCursorVisible(); +} + + +/*! + \enum QTextEdit::KeyboardAction + + \compat + + \value ActionBackspace + \value ActionDelete + \value ActionReturn + \value ActionKill + \value ActionWordBackspace + \value ActionWordDelete +*/ + +/*! + \fn bool QTextEdit::find(const QString &exp, bool cs, bool wo) + + Use the find() overload that takes a QTextDocument::FindFlags + argument. +*/ + +/*! + \fn void QTextEdit::sync() + + Does nothing. +*/ + +/*! + \fn void QTextEdit::setBold(bool b) + + Use setFontWeight() instead. +*/ + +/*! + \fn void QTextEdit::setUnderline(bool b) + + Use setFontUnderline() instead. +*/ + +/*! + \fn void QTextEdit::setItalic(bool i) + + Use setFontItalic() instead. +*/ + +/*! + \fn void QTextEdit::setFamily(const QString &family) + + Use setFontFamily() instead. +*/ + +/*! + \fn void QTextEdit::setPointSize(int size) + + Use setFontPointSize() instead. +*/ + +/*! + \fn bool QTextEdit::italic() const + + Use fontItalic() instead. +*/ + +/*! + \fn bool QTextEdit::bold() const + + Use fontWeight() >= QFont::Bold instead. +*/ + +/*! + \fn bool QTextEdit::underline() const + + Use fontUnderline() instead. +*/ + +/*! + \fn QString QTextEdit::family() const + + Use fontFamily() instead. +*/ + +/*! + \fn int QTextEdit::pointSize() const + + Use int(fontPointSize()+0.5) instead. +*/ + +/*! + \fn bool QTextEdit::hasSelectedText() const + + Use textCursor().hasSelection() instead. +*/ + +/*! + \fn QString QTextEdit::selectedText() const + + Use textCursor().selectedText() instead. +*/ + +/*! + \fn bool QTextEdit::isUndoAvailable() const + + Use document()->isUndoAvailable() instead. +*/ + +/*! + \fn bool QTextEdit::isRedoAvailable() const + + Use document()->isRedoAvailable() instead. +*/ + +/*! + \fn void QTextEdit::insert(const QString &text) + + Use insertPlainText() instead. +*/ + +/*! + \fn bool QTextEdit::isModified() const + + Use document()->isModified() instead. +*/ + +/*! + \fn QColor QTextEdit::color() const + + Use textColor() instead. +*/ + +/*! + \fn void QTextEdit::textChanged() + + This signal is emitted whenever the document's content changes; for + example, when text is inserted or deleted, or when formatting is applied. +*/ + +/*! + \fn void QTextEdit::undoAvailable(bool available) + + This signal is emitted whenever undo operations become available + (\a available is true) or unavailable (\a available is false). +*/ + +/*! + \fn void QTextEdit::redoAvailable(bool available) + + This signal is emitted whenever redo operations become available + (\a available is true) or unavailable (\a available is false). +*/ + +/*! + \fn void QTextEdit::currentFontChanged(const QFont &font) + + Use currentCharFormatChanged() instead. +*/ + +/*! + \fn void QTextEdit::currentColorChanged(const QColor &color) + + Use currentCharFormatChanged() instead. +*/ + +/*! + \fn void QTextEdit::setModified(bool m) + + Use document->setModified() instead. +*/ + +/*! + \fn void QTextEdit::setColor(const QColor &color) + + Use setTextColor() instead. +*/ +#endif // QT_NO_TEXTEDIT + +QT_END_NAMESPACE + +#include "moc_qtextedit.cpp" |