diff options
Diffstat (limited to 'src/qt3support/network/q3http.cpp')
| -rw-r--r-- | src/qt3support/network/q3http.cpp | 2322 |
1 files changed, 2322 insertions, 0 deletions
diff --git a/src/qt3support/network/q3http.cpp b/src/qt3support/network/q3http.cpp new file mode 100644 index 0000000..f1590a6 --- /dev/null +++ b/src/qt3support/network/q3http.cpp @@ -0,0 +1,2322 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the Qt3Support module of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +#include <qplatformdefs.h> +#include "q3http.h" + +#ifndef QT_NO_NETWORKPROTOCOL_HTTP + +#include "q3socket.h" +#include "qtextstream.h" +#include "qmap.h" +#include "qstring.h" +#include "qstringlist.h" +#include "q3cstring.h" +#include "qbuffer.h" +#include "q3urloperator.h" +#include "qtimer.h" +#include "private/q3membuf_p.h" +#include "qevent.h" +#include "q3url.h" +#include "qhttp.h" + +QT_BEGIN_NAMESPACE + +//#define Q3HTTP_DEBUG + +class Q3HttpPrivate +{ +public: + Q3HttpPrivate() : + state( Q3Http::Unconnected ), + error( Q3Http::NoError ), + hostname( QString() ), + port( 0 ), + toDevice( 0 ), + postDevice( 0 ), + bytesDone( 0 ), + chunkedSize( -1 ), + idleTimer( 0 ) + { + pending.setAutoDelete( true ); + } + + Q3Socket socket; + Q3PtrList<Q3HttpRequest> pending; + + Q3Http::State state; + Q3Http::Error error; + QString errorString; + + QString hostname; + Q_UINT16 port; + + QByteArray buffer; + QIODevice* toDevice; + QIODevice* postDevice; + + uint bytesDone; + uint bytesTotal; + Q_LONG chunkedSize; + + Q3HttpRequestHeader header; + + bool readHeader; + QString headerStr; + Q3HttpResponseHeader response; + + int idleTimer; + + Q3Membuf rba; +}; + +class Q3HttpRequest +{ +public: + Q3HttpRequest() + { + id = ++idCounter; + } + virtual ~Q3HttpRequest() + { } + + virtual void start( Q3Http * ) = 0; + virtual bool hasRequestHeader(); + virtual Q3HttpRequestHeader requestHeader(); + + virtual QIODevice* sourceDevice() = 0; + virtual QIODevice* destinationDevice() = 0; + + int id; + +private: + static int idCounter; +}; + +int Q3HttpRequest::idCounter = 0; + +bool Q3HttpRequest::hasRequestHeader() +{ + return false; +} + +Q3HttpRequestHeader Q3HttpRequest::requestHeader() +{ + return Q3HttpRequestHeader(); +} + +/**************************************************** + * + * Q3HttpNormalRequest + * + ****************************************************/ + +class Q3HttpNormalRequest : public Q3HttpRequest +{ +public: + Q3HttpNormalRequest( const Q3HttpRequestHeader &h, QIODevice *d, QIODevice *t ) : + header(h), to(t) + { + is_ba = false; + data.dev = d; + } + + Q3HttpNormalRequest( const Q3HttpRequestHeader &h, QByteArray *d, QIODevice *t ) : + header(h), to(t) + { + is_ba = true; + data.ba = d; + } + + ~Q3HttpNormalRequest() + { + if ( is_ba ) + delete data.ba; + } + + void start( Q3Http * ); + bool hasRequestHeader(); + Q3HttpRequestHeader requestHeader(); + + QIODevice* sourceDevice(); + QIODevice* destinationDevice(); + +protected: + Q3HttpRequestHeader header; + +private: + union { + QByteArray *ba; + QIODevice *dev; + } data; + bool is_ba; + QIODevice *to; +}; + +void Q3HttpNormalRequest::start( Q3Http *http ) +{ + http->d->header = header; + + if ( is_ba ) { + http->d->buffer = *data.ba; + if ( http->d->buffer.size() > 0 ) + http->d->header.setContentLength( http->d->buffer.size() ); + + http->d->postDevice = 0; + } else { + http->d->buffer = QByteArray(); + + if ( data.dev && ( data.dev->isOpen() || data.dev->open(IO_ReadOnly) ) ) { + http->d->postDevice = data.dev; + if ( http->d->postDevice->size() > 0 ) + http->d->header.setContentLength( http->d->postDevice->size() ); + } else { + http->d->postDevice = 0; + } + } + + if ( to && ( to->isOpen() || to->open(IO_WriteOnly) ) ) + http->d->toDevice = to; + else + http->d->toDevice = 0; + + http->sendRequest(); +} + +bool Q3HttpNormalRequest::hasRequestHeader() +{ + return true; +} + +Q3HttpRequestHeader Q3HttpNormalRequest::requestHeader() +{ + return header; +} + +QIODevice* Q3HttpNormalRequest::sourceDevice() +{ + if ( is_ba ) + return 0; + return data.dev; +} + +QIODevice* Q3HttpNormalRequest::destinationDevice() +{ + return to; +} + +/**************************************************** + * + * Q3HttpPGHRequest + * (like a Q3HttpNormalRequest, but for the convenience + * functions put(), get() and head() -- i.e. set the + * host header field correctly before sending the + * request) + * + ****************************************************/ + +class Q3HttpPGHRequest : public Q3HttpNormalRequest +{ +public: + Q3HttpPGHRequest( const Q3HttpRequestHeader &h, QIODevice *d, QIODevice *t ) : + Q3HttpNormalRequest( h, d, t ) + { } + + Q3HttpPGHRequest( const Q3HttpRequestHeader &h, QByteArray *d, QIODevice *t ) : + Q3HttpNormalRequest( h, d, t ) + { } + + ~Q3HttpPGHRequest() + { } + + void start( Q3Http * ); +}; + +void Q3HttpPGHRequest::start( Q3Http *http ) +{ + header.setValue( QLatin1String("Host"), http->d->hostname ); + Q3HttpNormalRequest::start( http ); +} + +/**************************************************** + * + * Q3HttpSetHostRequest + * + ****************************************************/ + +class Q3HttpSetHostRequest : public Q3HttpRequest +{ +public: + Q3HttpSetHostRequest( const QString &h, Q_UINT16 p ) : + hostname(h), port(p) + { } + + void start( Q3Http * ); + + QIODevice* sourceDevice() + { return 0; } + QIODevice* destinationDevice() + { return 0; } + +private: + QString hostname; + Q_UINT16 port; +}; + +void Q3HttpSetHostRequest::start( Q3Http *http ) +{ + http->d->hostname = hostname; + http->d->port = port; + http->finishedWithSuccess(); +} + +/**************************************************** + * + * Q3HttpCloseRequest + * + ****************************************************/ + +class Q3HttpCloseRequest : public Q3HttpRequest +{ +public: + Q3HttpCloseRequest() + { } + void start( Q3Http * ); + + QIODevice* sourceDevice() + { return 0; } + QIODevice* destinationDevice() + { return 0; } +}; + +void Q3HttpCloseRequest::start( Q3Http *http ) +{ + http->close(); +} + +/**************************************************** + * + * Q3HttpHeader + * + ****************************************************/ + +/*! + \class Q3HttpHeader + \brief The Q3HttpHeader class contains header information for HTTP. + + \compat + + In most cases you should use the more specialized derivatives of + this class, Q3HttpResponseHeader and Q3HttpRequestHeader, rather + than directly using Q3HttpHeader. + + Q3HttpHeader provides the HTTP header fields. A HTTP header field + consists of a name followed by a colon, a single space, and the + field value. (See RFC 1945.) Field names are case-insensitive. A + typical header field looks like this: + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 0 + + In the API the header field name is called the "key" and the + content is called the "value". You can get and set a header + field's value by using its key with value() and setValue(), e.g. + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 1 + + Some fields are so common that getters and setters are provided + for them as a convenient alternative to using \l value() and + \l setValue(), e.g. contentLength() and contentType(), + setContentLength() and setContentType(). + + Each header key has a \e single value associated with it. If you + set the value for a key which already exists the previous value + will be discarded. + + \sa Q3HttpRequestHeader Q3HttpResponseHeader +*/ + +/*! + \fn int Q3HttpHeader::majorVersion() const + + Returns the major protocol-version of the HTTP header. +*/ + +/*! + \fn int Q3HttpHeader::minorVersion() const + + Returns the minor protocol-version of the HTTP header. +*/ + +/*! + Constructs an empty HTTP header. +*/ +Q3HttpHeader::Q3HttpHeader() + : valid( true ) +{ +} + +/*! + Constructs a copy of \a header. +*/ +Q3HttpHeader::Q3HttpHeader( const Q3HttpHeader& header ) + : valid( header.valid ) +{ + values = header.values; +} + +/*! + Constructs a HTTP header for \a str. + + This constructor parses the string \a str for header fields and + adds this information. The \a str should consist of one or more + "\r\n" delimited lines; each of these lines should have the format + key, colon, space, value. +*/ +Q3HttpHeader::Q3HttpHeader( const QString& str ) + : valid( true ) +{ + parse( str ); +} + +/*! + Destructor. +*/ +Q3HttpHeader::~Q3HttpHeader() +{ +} + +/*! + Assigns \a h and returns a reference to this http header. +*/ +Q3HttpHeader& Q3HttpHeader::operator=( const Q3HttpHeader& h ) +{ + values = h.values; + valid = h.valid; + return *this; +} + +/*! + Returns true if the HTTP header is valid; otherwise returns false. + + A Q3HttpHeader is invalid if it was created by parsing a malformed string. +*/ +bool Q3HttpHeader::isValid() const +{ + return valid; +} + +/*! \internal + Parses the HTTP header string \a str for header fields and adds + the keys/values it finds. If the string is not parsed successfully + the Q3HttpHeader becomes \link isValid() invalid\endlink. + + Returns true if \a str was successfully parsed; otherwise returns false. + + \sa toString() +*/ +bool Q3HttpHeader::parse( const QString& str ) +{ + QStringList lst; + int pos = str.find( QLatin1Char('\n') ); + if ( pos > 0 && str.at( pos - 1 ) == QLatin1Char('\r') ) + lst = QStringList::split( QLatin1String("\r\n"), str.stripWhiteSpace(), false ); + else + lst = QStringList::split( QLatin1String("\n"), str.stripWhiteSpace(), false ); + + if ( lst.isEmpty() ) + return true; + + QStringList lines; + QStringList::Iterator it = lst.begin(); + for( ; it != lst.end(); ++it ) { + if ( !(*it).isEmpty() ) { + if ( (*it)[0].isSpace() ) { + if ( !lines.isEmpty() ) { + lines.last() += QLatin1String(" "); + lines.last() += (*it).stripWhiteSpace(); + } + } else { + lines.append( (*it) ); + } + } + } + + int number = 0; + it = lines.begin(); + for( ; it != lines.end(); ++it ) { + if ( !parseLine( *it, number++ ) ) { + valid = false; + return false; + } + } + return true; +} + +/*! \internal +*/ +void Q3HttpHeader::setValid( bool v ) +{ + valid = v; +} + +/*! + Returns the value for the entry with the given \a key. If no entry + has this \a key, an empty string is returned. + + \sa setValue() removeValue() hasKey() keys() +*/ +QString Q3HttpHeader::value( const QString& key ) const +{ + return values[ key.lower() ]; +} + +/*! + Returns a list of the keys in the HTTP header. + + \sa hasKey() +*/ +QStringList Q3HttpHeader::keys() const +{ + return values.keys(); +} + +/*! + Returns true if the HTTP header has an entry with the given \a + key; otherwise returns false. + + \sa value() setValue() keys() +*/ +bool Q3HttpHeader::hasKey( const QString& key ) const +{ + return values.contains( key.lower() ); +} + +/*! + Sets the value of the entry with the \a key to \a value. + + If no entry with \a key exists, a new entry with the given \a key + and \a value is created. If an entry with the \a key already + exists, its value is discarded and replaced with the given \a + value. + + \sa value() hasKey() removeValue() +*/ +void Q3HttpHeader::setValue( const QString& key, const QString& value ) +{ + values[ key.lower() ] = value; +} + +/*! + Removes the entry with the key \a key from the HTTP header. + + \sa value() setValue() +*/ +void Q3HttpHeader::removeValue( const QString& key ) +{ + values.remove( key.lower() ); +} + +/*! \internal + Parses the single HTTP header line \a line which has the format + key, colon, space, value, and adds key/value to the headers. The + linenumber is \a number. Returns true if the line was successfully + parsed and the key/value added; otherwise returns false. + + \sa parse() +*/ +bool Q3HttpHeader::parseLine( const QString& line, int ) +{ + int i = line.find( QLatin1String(":") ); + if ( i == -1 ) + return false; + + values.insert( line.left( i ).stripWhiteSpace().lower(), line.mid( i + 1 ).stripWhiteSpace() ); + + return true; +} + +/*! + Returns a string representation of the HTTP header. + + The string is suitable for use by the constructor that takes a + QString. It consists of lines with the format: key, colon, space, + value, "\r\n". +*/ +QString Q3HttpHeader::toString() const +{ + if ( !isValid() ) + return QLatin1String(""); + + QString ret = QLatin1String(""); + + QMap<QString,QString>::ConstIterator it = values.begin(); + for( ; it != values.end(); ++it ) + ret += it.key() + QLatin1String(": ") + it.data() + QLatin1String("\r\n"); + + return ret; +} + +/*! + Returns true if the header has an entry for the special HTTP + header field \c content-length; otherwise returns false. + + \sa contentLength() setContentLength() +*/ +bool Q3HttpHeader::hasContentLength() const +{ + return hasKey( QLatin1String("content-length") ); +} + +/*! + Returns the value of the special HTTP header field \c + content-length. + + \sa setContentLength() hasContentLength() +*/ +uint Q3HttpHeader::contentLength() const +{ + return values[ QLatin1String("content-length") ].toUInt(); +} + +/*! + Sets the value of the special HTTP header field \c content-length + to \a len. + + \sa contentLength() hasContentLength() +*/ +void Q3HttpHeader::setContentLength( int len ) +{ + values[ QLatin1String("content-length") ] = QString::number( len ); +} + +/*! + Returns true if the header has an entry for the the special HTTP + header field \c content-type; otherwise returns false. + + \sa contentType() setContentType() +*/ +bool Q3HttpHeader::hasContentType() const +{ + return hasKey( QLatin1String("content-type") ); +} + +/*! + Returns the value of the special HTTP header field \c content-type. + + \sa setContentType() hasContentType() +*/ +QString Q3HttpHeader::contentType() const +{ + QString type = values[ QLatin1String("content-type") ]; + if ( type.isEmpty() ) + return QString(); + + int pos = type.find( QLatin1String(";") ); + if ( pos == -1 ) + return type; + + return type.left( pos ).stripWhiteSpace(); +} + +/*! + Sets the value of the special HTTP header field \c content-type to + \a type. + + \sa contentType() hasContentType() +*/ +void Q3HttpHeader::setContentType( const QString& type ) +{ + values[ QLatin1String("content-type") ] = type; +} + +/**************************************************** + * + * Q3HttpResponseHeader + * + ****************************************************/ + +/*! + \class Q3HttpResponseHeader + \brief The Q3HttpResponseHeader class contains response header information for HTTP. + + \compat + + This class is used by the Q3Http class to report the header + information that the client received from the server. + + HTTP responses have a status code that indicates the status of the + response. This code is a 3-digit integer result code (for details + see to RFC 1945). In addition to the status code, you can also + specify a human-readable text that describes the reason for the + code ("reason phrase"). This class allows you to get the status + code and the reason phrase. + + \sa Q3HttpRequestHeader Q3Http +*/ + +/*! + Constructs an empty HTTP response header. +*/ +Q3HttpResponseHeader::Q3HttpResponseHeader() +{ + setValid( false ); +} + +/*! + Constructs a HTTP response header with the status code \a code, + the reason phrase \a text and the protocol-version \a majorVer and + \a minorVer. +*/ +Q3HttpResponseHeader::Q3HttpResponseHeader( int code, const QString& text, int majorVer, int minorVer ) + : Q3HttpHeader(), statCode( code ), reasonPhr( text ), majVer( majorVer ), minVer( minorVer ) +{ +} + +/*! + Constructs a copy of \a header. +*/ +Q3HttpResponseHeader::Q3HttpResponseHeader( const Q3HttpResponseHeader& header ) + : Q3HttpHeader( header ), statCode( header.statCode ), reasonPhr( header.reasonPhr ), majVer( header.majVer ), minVer( header.minVer ) +{ +} + +/*! + Constructs a HTTP response header from the string \a str. The + string is parsed and the information is set. The \a str should + consist of one or more "\r\n" delimited lines; the first line should be the + status-line (format: HTTP-version, space, status-code, space, + reason-phrase); each of remaining lines should have the format key, colon, + space, value. +*/ +Q3HttpResponseHeader::Q3HttpResponseHeader( const QString& str ) + : Q3HttpHeader() +{ + parse( str ); +} + +/*! + Sets the status code to \a code, the reason phrase to \a text and + the protocol-version to \a majorVer and \a minorVer. + + \sa statusCode() reasonPhrase() majorVersion() minorVersion() +*/ +void Q3HttpResponseHeader::setStatusLine( int code, const QString& text, int majorVer, int minorVer ) +{ + setValid( true ); + statCode = code; + reasonPhr = text; + majVer = majorVer; + minVer = minorVer; +} + +/*! + Returns the status code of the HTTP response header. + + \sa reasonPhrase() majorVersion() minorVersion() +*/ +int Q3HttpResponseHeader::statusCode() const +{ + return statCode; +} + +/*! + Returns the reason phrase of the HTTP response header. + + \sa statusCode() majorVersion() minorVersion() +*/ +QString Q3HttpResponseHeader::reasonPhrase() const +{ + return reasonPhr; +} + +/*! + Returns the major protocol-version of the HTTP response header. + + \sa minorVersion() statusCode() reasonPhrase() +*/ +int Q3HttpResponseHeader::majorVersion() const +{ + return majVer; +} + +/*! + Returns the minor protocol-version of the HTTP response header. + + \sa majorVersion() statusCode() reasonPhrase() +*/ +int Q3HttpResponseHeader::minorVersion() const +{ + return minVer; +} + +/*! \reimp +*/ +bool Q3HttpResponseHeader::parseLine( const QString& line, int number ) +{ + if ( number != 0 ) + return Q3HttpHeader::parseLine( line, number ); + + QString l = line.simplifyWhiteSpace(); + if ( l.length() < 10 ) + return false; + + if ( l.left( 5 ) == QLatin1String("HTTP/") && l[5].isDigit() && l[6] == QLatin1Char('.') && + l[7].isDigit() && l[8] == QLatin1Char(' ') && l[9].isDigit() ) { + majVer = l[5].latin1() - '0'; + minVer = l[7].latin1() - '0'; + + int pos = l.find( QLatin1Char(' '), 9 ); + if ( pos != -1 ) { + reasonPhr = l.mid( pos + 1 ); + statCode = l.mid( 9, pos - 9 ).toInt(); + } else { + statCode = l.mid( 9 ).toInt(); + reasonPhr.clear(); + } + } else { + return false; + } + + return true; +} + +/*! \reimp +*/ +QString Q3HttpResponseHeader::toString() const +{ + QString ret( QLatin1String("HTTP/%1.%2 %3 %4\r\n%5\r\n") ); + return ret.arg( majVer ).arg ( minVer ).arg( statCode ).arg( reasonPhr ).arg( Q3HttpHeader::toString() ); +} + +/**************************************************** + * + * Q3HttpRequestHeader + * + ****************************************************/ + +/*! + \class Q3HttpRequestHeader + \brief The Q3HttpRequestHeader class contains request header information for + HTTP. + + \compat + + This class is used in the Q3Http class to report the header + information if the client requests something from the server. + + HTTP requests have a method which describes the request's action. + The most common requests are "GET" and "POST". In addition to the + request method the header also includes a request-URI to specify + the location for the method to use. + + The method, request-URI and protocol-version can be set using a + constructor or later using setRequest(). The values can be + obtained using method(), path(), majorVersion() and + minorVersion(). + + This class is a Q3HttpHeader subclass so that class's functions, + e.g. \link Q3HttpHeader::setValue() setValue()\endlink, \link + Q3HttpHeader::value() value()\endlink, etc. are also available. + + \sa Q3HttpResponseHeader Q3Http +*/ + +/*! + Constructs an empty HTTP request header. +*/ +Q3HttpRequestHeader::Q3HttpRequestHeader() + : Q3HttpHeader() +{ + setValid( false ); +} + +/*! + Constructs a HTTP request header for the method \a method, the + request-URI \a path and the protocol-version \a majorVer and \a minorVer. +*/ +Q3HttpRequestHeader::Q3HttpRequestHeader( const QString& method, const QString& path, int majorVer, int minorVer ) + : Q3HttpHeader(), m( method ), p( path ), majVer( majorVer ), minVer( minorVer ) +{ +} + +/*! + Constructs a copy of \a header. +*/ +Q3HttpRequestHeader::Q3HttpRequestHeader( const Q3HttpRequestHeader& header ) + : Q3HttpHeader( header ), m( header.m ), p( header.p ), majVer( header.majVer ), minVer( header.minVer ) +{ +} + +/*! + Constructs a HTTP request header from the string \a str. The \a + str should consist of one or more "\r\n" delimited lines; the first line + should be the request-line (format: method, space, request-URI, space + HTTP-version); each of the remaining lines should have the format key, + colon, space, value. +*/ +Q3HttpRequestHeader::Q3HttpRequestHeader( const QString& str ) + : Q3HttpHeader() +{ + parse( str ); +} + +/*! + This function sets the request method to \a method, the + request-URI to \a path and the protocol-version to \a majorVer and + \a minorVer. + + \sa method() path() majorVersion() minorVersion() +*/ +void Q3HttpRequestHeader::setRequest( const QString& method, const QString& path, int majorVer, int minorVer ) +{ + setValid( true ); + m = method; + p = path; + majVer = majorVer; + minVer = minorVer; +} + +/*! + Returns the method of the HTTP request header. + + \sa path() majorVersion() minorVersion() setRequest() +*/ +QString Q3HttpRequestHeader::method() const +{ + return m; +} + +/*! + Returns the request-URI of the HTTP request header. + + \sa method() majorVersion() minorVersion() setRequest() +*/ +QString Q3HttpRequestHeader::path() const +{ + return p; +} + +/*! + Returns the major protocol-version of the HTTP request header. + + \sa minorVersion() method() path() setRequest() +*/ +int Q3HttpRequestHeader::majorVersion() const +{ + return majVer; +} + +/*! + Returns the minor protocol-version of the HTTP request header. + + \sa majorVersion() method() path() setRequest() +*/ +int Q3HttpRequestHeader::minorVersion() const +{ + return minVer; +} + +/*! \reimp +*/ +bool Q3HttpRequestHeader::parseLine( const QString& line, int number ) +{ + if ( number != 0 ) + return Q3HttpHeader::parseLine( line, number ); + + QStringList lst = QStringList::split( QLatin1String(" "), line.simplifyWhiteSpace() ); + if ( lst.count() > 0 ) { + m = lst[0]; + if ( lst.count() > 1 ) { + p = lst[1]; + if ( lst.count() > 2 ) { + QString v = lst[2]; + if ( v.length() >= 8 && v.left( 5 ) == QLatin1String("HTTP/") && + v[5].isDigit() && v[6] == QLatin1Char('.') && v[7].isDigit() ) { + majVer = v[5].latin1() - '0'; + minVer = v[7].latin1() - '0'; + return true; + } + } + } + } + + return false; +} + +/*! \reimp +*/ +QString Q3HttpRequestHeader::toString() const +{ + QString first( QLatin1String("%1 %2")); + QString last(QLatin1String(" HTTP/%3.%4\r\n%5\r\n") ); + return first.arg( m ).arg( p ) + + last.arg( majVer ).arg( minVer ).arg( Q3HttpHeader::toString()); +} + + +/**************************************************** + * + * Q3Http + * + ****************************************************/ +/*! + \class Q3Http + \brief The Q3Http class provides an implementation of the HTTP protocol. + + \compat + + This class provides two different interfaces: one is the + Q3NetworkProtocol interface that allows you to use HTTP through the + QUrlOperator abstraction. The other is a direct interface to HTTP + that allows you to have more control over the requests and that + allows you to access the response header fields. + + Don't mix the two interfaces, since the behavior is not + well-defined. + + If you want to use Q3Http with the Q3NetworkProtocol interface, you + do not use it directly, but rather through a QUrlOperator, for + example: + + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 2 + + This code will only work if the Q3Http class is registered; to + register the class, you must call q3InitNetworkProtocols() before + using a QUrlOperator with HTTP. + + The Q3NetworkProtocol interface for HTTP only supports the + operations operationGet() and operationPut(), i.e. + QUrlOperator::get() and QUrlOperator::put(), if you use it with a + QUrlOperator. + + The rest of this descrption describes the direct interface to + HTTP. + + The class works asynchronously, so there are no blocking + functions. If an operation cannot be executed immediately, the + function will still return straight away and the operation will be + scheduled for later execution. The results of scheduled operations + are reported via signals. This approach depends on the event loop + being in operation. + + The operations that can be scheduled (they are called "requests" + in the rest of the documentation) are the following: setHost(), + get(), post(), head() and request(). + + All of these requests return a unique identifier that allows you + to keep track of the request that is currently executed. When the + execution of a request starts, the requestStarted() signal with + the identifier is emitted and when the request is finished, the + requestFinished() signal is emitted with the identifier and a bool + that indicates if the request finished with an error. + + To make an HTTP request you must set up suitable HTTP headers. The + following example demonstrates, how to request the main HTML page + from the Trolltech home page (i.e. the URL + http://qtsoftware.com/index.html): + + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 3 + + For the common HTTP requests \c GET, \c POST and \c HEAD, Q3Http + provides the convenience functions get(), post() and head(). They + already use a reasonable header and if you don't have to set + special header fields, they are easier to use. The above example + can also be written as: + + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 4 + + For this example the following sequence of signals is emitted + (with small variations, depending on network traffic, etc.): + + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 5 + + The dataSendProgress() and dataReadProgress() signals in the above + example are useful if you want to show a \link QProgressBar + progress bar\endlink to inform the user about the progress of the + download. The second argument is the total size of data. In + certain cases it is not possible to know the total amount in + advance, in which case the second argument is 0. (If you connect + to a QProgressBar a total of 0 results in a busy indicator.) + + When the response header is read, it is reported with the + responseHeaderReceived() signal. + + The readyRead() signal tells you that there is data ready to be + read. The amount of data can then be queried with the + bytesAvailable() function and it can be read with the readBlock() + or readAll() functions. + + If an error occurs during the execution of one of the commands in + a sequence of commands, all the pending commands (i.e. scheduled, + but not yet executed commands) are cleared and no signals are + emitted for them. + + For example, if you have the following sequence of reqeusts + + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 6 + + and the get() request fails because the host lookup fails, then + the post() request is never executed and the signals would look + like this: + + \snippet doc/src/snippets/code/src_qt3support_network_q3http.cpp 7 + + You can then get details about the error with the error() and + errorString() functions. Note that only unexpected behaviour, like + network failure is considered as an error. If the server response + contains an error status, like a 404 response, this is reported as + a normal response case. So you should always check the \link + Q3HttpResponseHeader::statusCode() status code \endlink of the + response header. + + The functions currentId() and currentRequest() provide more + information about the currently executing request. + + The functions hasPendingRequests() and clearPendingRequests() + allow you to query and clear the list of pending requests. + + \sa Q3NetworkProtocol, Q3UrlOperator, Q3Ftp +*/ + +/*! + Constructs a Q3Http object. +*/ +Q3Http::Q3Http() +{ + init(); +} + +/*! + Constructs a Q3Http object. The parameters \a parent and \a name + are passed on to the QObject constructor. +*/ +Q3Http::Q3Http( QObject* parent, const char* name ) +{ + if ( parent ) + parent->insertChild( this ); + setName( name ); + init(); +} + +/*! + Constructs a Q3Http object. Subsequent requests are done by + connecting to the server \a hostname on port \a port. The + parameters \a parent and \a name are passed on to the QObject + constructor. + + \sa setHost() +*/ +Q3Http::Q3Http( const QString &hostname, Q_UINT16 port, QObject* parent, const char* name ) +{ + if ( parent ) + parent->insertChild( this ); + setName( name ); + init(); + + d->hostname = hostname; + d->port = port; +} + +void Q3Http::init() +{ + bytesRead = 0; + d = new Q3HttpPrivate; + d->errorString = QHttp::tr( "Unknown error" ); + + connect( &d->socket, SIGNAL(connected()), + this, SLOT(slotConnected()) ); + connect( &d->socket, SIGNAL(connectionClosed()), + this, SLOT(slotClosed()) ); + connect( &d->socket, SIGNAL(delayedCloseFinished()), + this, SLOT(slotClosed()) ); + connect( &d->socket, SIGNAL(readyRead()), + this, SLOT(slotReadyRead()) ); + connect( &d->socket, SIGNAL(error(int)), + this, SLOT(slotError(int)) ); + connect( &d->socket, SIGNAL(bytesWritten(int)), + this, SLOT(slotBytesWritten(int)) ); + + d->idleTimer = startTimer( 0 ); +} + +/*! + Destroys the Q3Http object. If there is an open connection, it is + closed. +*/ +Q3Http::~Q3Http() +{ + abort(); + delete d; +} + +/*! + \enum Q3Http::State + + This enum is used to specify the state the client is in: + + \value Unconnected There is no connection to the host. + \value HostLookup A host name lookup is in progress. + \value Connecting An attempt to connect to the host is in progress. + \value Sending The client is sending its request to the server. + \value Reading The client's request has been sent and the client + is reading the server's response. + \value Connected The connection to the host is open, but the client is + neither sending a request, nor waiting for a response. + \value Closing The connection is closing down, but is not yet + closed. (The state will be \c Unconnected when the connection is + closed.) + + \sa stateChanged() state() +*/ + +/*! \enum Q3Http::Error + + This enum identifies the error that occurred. + + \value NoError No error occurred. + \value HostNotFound The host name lookup failed. + \value ConnectionRefused The server refused the connection. + \value UnexpectedClose The server closed the connection unexpectedly. + \value InvalidResponseHeader The server sent an invalid response header. + \value WrongContentLength The client could not read the content correctly + because an error with respect to the content length occurred. + \value Aborted The request was aborted with abort(). + \value UnknownError An error other than those specified above + occurred. + + \sa error() +*/ + +/*! + \fn void Q3Http::stateChanged( int state ) + + This signal is emitted when the state of the Q3Http object changes. + The argument \a state is the new state of the connection; it is + one of the \l State values. + + This usually happens when a request is started, but it can also + happen when the server closes the connection or when a call to + closeConnection() succeeded. + + \sa get() post() head() request() closeConnection() state() State +*/ + +/*! + \fn void Q3Http::responseHeaderReceived( const Q3HttpResponseHeader& resp ) + + This signal is emitted when the HTTP header of a server response + is available. The header is passed in \a resp. + + \sa get() post() head() request() readyRead() +*/ + +/*! + \fn void Q3Http::readyRead( const Q3HttpResponseHeader& resp ) + + This signal is emitted when there is new response data to read. + + If you specified a device in the request where the data should be + written to, then this signal is \e not emitted; instead the data + is written directly to the device. + + The response header is passed in \a resp. + + You can read the data with the readAll() or readBlock() functions + + This signal is useful if you want to process the data in chunks as + soon as it becomes available. If you are only interested in the + complete data, just connect to the requestFinished() signal and + read the data then instead. + + \sa get() post() request() readAll() readBlock() bytesAvailable() +*/ + +/*! + \fn void Q3Http::dataSendProgress( int done, int total ) + + This signal is emitted when this object sends data to a HTTP + server to inform it about the progress of the upload. + + \a done is the amount of data that has already arrived and \a + total is the total amount of data. It is possible that the total + amount of data that should be transferred cannot be determined, in + which case \a total is 0.(If you connect to a QProgressBar, the + progress bar shows a busy indicator if the total is 0). + + \warning \a done and \a total are not necessarily the size in + bytes, since for large files these values might need to be + "scaled" to avoid overflow. + + \sa dataReadProgress() post() request() QProgressBar::setValue() +*/ + +/*! + \fn void Q3Http::dataReadProgress( int done, int total ) + + This signal is emitted when this object reads data from a HTTP + server to indicate the current progress of the download. + + \a done is the amount of data that has already arrived and \a + total is the total amount of data. It is possible that the total + amount of data that should be transferred cannot be determined, in + which case \a total is 0.(If you connect to a QProgressBar, the + progress bar shows a busy indicator if the total is 0). + + \warning \a done and \a total are not necessarily the size in + bytes, since for large files these values might need to be + "scaled" to avoid overflow. + + \sa dataSendProgress() get() post() request() QProgressBar::setValue() +*/ + +/*! + \fn void Q3Http::requestStarted( int id ) + + This signal is emitted when processing the request identified by + \a id starts. + + \sa requestFinished() done() +*/ + +/*! + \fn void Q3Http::requestFinished( int id, bool error ) + + This signal is emitted when processing the request identified by + \a id has finished. \a error is true if an error occurred during + the processing; otherwise \a error is false. + + \sa requestStarted() done() error() errorString() +*/ + +/*! + \fn void Q3Http::done( bool error ) + + This signal is emitted when the last pending request has finished; + (it is emitted after the last request's requestFinished() signal). + \a error is true if an error occurred during the processing; + otherwise \a error is false. + + \sa requestFinished() error() errorString() +*/ + +/*! + Aborts the current request and deletes all scheduled requests. + + For the current request, the requestFinished() signal with the \c + error argument \c true is emitted. For all other requests that are + affected by the abort(), no signals are emitted. + + Since this slot also deletes the scheduled requests, there are no + requests left and the done() signal is emitted (with the \c error + argument \c true). + + \sa clearPendingRequests() +*/ +void Q3Http::abort() +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( r == 0 ) + return; + + finishedWithError( QHttp::tr("Request aborted"), Aborted ); + clearPendingRequests(); + d->socket.clearPendingData(); + close(); +} + +/*! + Returns the number of bytes that can be read from the response + content at the moment. + + \sa get() post() request() readyRead() readBlock() readAll() +*/ +Q_ULONG Q3Http::bytesAvailable() const +{ +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http::bytesAvailable(): %d bytes", (int)d->rba.size() ); +#endif + return d->rba.size(); +} + +/*! + Reads \a maxlen bytes from the response content into \a data and + returns the number of bytes read. Returns -1 if an error occurred. + + \sa get() post() request() readyRead() bytesAvailable() readAll() +*/ +Q_LONG Q3Http::readBlock( char *data, Q_ULONG maxlen ) +{ + if ( data == 0 && maxlen != 0 ) { +#if defined(QT_CHECK_NULL) + qWarning( "Q3Http::readBlock: Null pointer error" ); +#endif + return -1; + } + if ( maxlen >= (Q_ULONG)d->rba.size() ) + maxlen = d->rba.size(); + d->rba.consumeBytes( maxlen, data ); + + d->bytesDone += maxlen; +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http::readBlock(): read %d bytes (%d bytes done)", (int)maxlen, d->bytesDone ); +#endif + return maxlen; +} + +/*! + Reads all the bytes from the response content and returns them. + + \sa get() post() request() readyRead() bytesAvailable() readBlock() +*/ +QByteArray Q3Http::readAll() +{ + Q_ULONG avail = bytesAvailable(); + QByteArray tmp( avail ); + Q_LONG read = readBlock( tmp.data(), avail ); + tmp.resize( read ); + return tmp; +} + +/*! + Returns the identifier of the HTTP request being executed or 0 if + there is no request being executed (i.e. they've all finished). + + \sa currentRequest() +*/ +int Q3Http::currentId() const +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( r == 0 ) + return 0; + return r->id; +} + +/*! + Returns the request header of the HTTP request being executed. If + the request is one issued by setHost() or closeConnection(), it + returns an invalid request header, i.e. + Q3HttpRequestHeader::isValid() returns false. + + \sa currentId() +*/ +Q3HttpRequestHeader Q3Http::currentRequest() const +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( r != 0 && r->hasRequestHeader() ) + return r->requestHeader(); + return Q3HttpRequestHeader(); +} + +/*! + Returns the QIODevice pointer that is used as the data source of the HTTP + request being executed. If there is no current request or if the request + does not use an IO device as the data source, this function returns 0. + + This function can be used to delete the QIODevice in the slot connected to + the requestFinished() signal. + + \sa currentDestinationDevice() post() request() +*/ +QIODevice* Q3Http::currentSourceDevice() const +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( !r ) + return 0; + return r->sourceDevice(); +} + +/*! + Returns the QIODevice pointer that is used as to store the data of the HTTP + request being executed. If there is no current request or if the request + does not store the data to an IO device, this function returns 0. + + This function can be used to delete the QIODevice in the slot connected to + the requestFinished() signal. + + \sa get() post() request() +*/ +QIODevice* Q3Http::currentDestinationDevice() const +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( !r ) + return 0; + return r->destinationDevice(); +} + +/*! + Returns true if there are any requests scheduled that have not yet + been executed; otherwise returns false. + + The request that is being executed is \e not considered as a + scheduled request. + + \sa clearPendingRequests() currentId() currentRequest() +*/ +bool Q3Http::hasPendingRequests() const +{ + return d->pending.count() > 1; +} + +/*! + Deletes all pending requests from the list of scheduled requests. + This does not affect the request that is being executed. If + you want to stop this as well, use abort(). + + \sa hasPendingRequests() abort() +*/ +void Q3Http::clearPendingRequests() +{ + Q3HttpRequest *r = 0; + if ( d->pending.count() > 0 ) + r = d->pending.take( 0 ); + d->pending.clear(); + if ( r ) + d->pending.append( r ); +} + +/*! + Sets the HTTP server that is used for requests to \a hostname on + port \a port. + + The function does not block and returns immediately. The request + is scheduled, and its execution is performed asynchronously. The + function returns a unique identifier which is passed by + requestStarted() and requestFinished(). + + When the request is started the requestStarted() signal is + emitted. When it is finished the requestFinished() signal is + emitted. + + \sa get() post() head() request() requestStarted() requestFinished() done() +*/ +int Q3Http::setHost(const QString &hostname, Q_UINT16 port ) +{ + return addRequest( new Q3HttpSetHostRequest( hostname, port ) ); +} + +/*! + Sends a get request for \a path to the server set by setHost() or + as specified in the constructor. + + \a path must be an absolute path like \c /index.html or an + absolute URI like \c http://qtsoftware.com/index.html. + + If the IO device \a to is 0 the readyRead() signal is emitted + every time new content data is available to read. + + If the IO device \a to is not 0, the content data of the response + is written directly to the device. Make sure that the \a to + pointer is valid for the duration of the operation (it is safe to + delete it when the requestFinished() signal is emitted). + + The function does not block and returns immediately. The request + is scheduled, and its execution is performed asynchronously. The + function returns a unique identifier which is passed by + requestStarted() and requestFinished(). + + When the request is started the requestStarted() signal is + emitted. When it is finished the requestFinished() signal is + emitted. + + \sa setHost() post() head() request() requestStarted() requestFinished() done() +*/ +int Q3Http::get( const QString& path, QIODevice* to ) +{ + Q3HttpRequestHeader header( QLatin1String("GET"), path ); + header.setValue( QLatin1String("Connection"), QLatin1String("Keep-Alive") ); + return addRequest( new Q3HttpPGHRequest( header, (QIODevice*)0, to ) ); +} + +/*! + Sends a post request for \a path to the server set by setHost() or + as specified in the constructor. + + \a path must be an absolute path like \c /index.html or an + absolute URI like \c http://qtsoftware.com/index.html. + + The incoming data comes via the \a data IO device. + + If the IO device \a to is 0 the readyRead() signal is emitted + every time new content data is available to read. + + If the IO device \a to is not 0, the content data of the response + is written directly to the device. Make sure that the \a to + pointer is valid for the duration of the operation (it is safe to + delete it when the requestFinished() signal is emitted). + + The function does not block and returns immediately. The request + is scheduled, and its execution is performed asynchronously. The + function returns a unique identifier which is passed by + requestStarted() and requestFinished(). + + When the request is started the requestStarted() signal is + emitted. When it is finished the requestFinished() signal is + emitted. + + \sa setHost() get() head() request() requestStarted() requestFinished() done() +*/ +int Q3Http::post( const QString& path, QIODevice* data, QIODevice* to ) +{ + Q3HttpRequestHeader header( QLatin1String("POST"), path ); + header.setValue( QLatin1String("Connection"), QLatin1String("Keep-Alive") ); + return addRequest( new Q3HttpPGHRequest( header, data, to ) ); +} + +/*! + \overload + + \a data is used as the content data of the HTTP request. +*/ +int Q3Http::post( const QString& path, const QByteArray& data, QIODevice* to ) +{ + Q3HttpRequestHeader header( QLatin1String("POST"), path ); + header.setValue( QLatin1String("Connection"), QLatin1String("Keep-Alive") ); + return addRequest( new Q3HttpPGHRequest( header, new QByteArray(data), to ) ); +} + +/*! + Sends a header request for \a path to the server set by setHost() + or as specified in the constructor. + + \a path must be an absolute path like \c /index.html or an + absolute URI like \c http://qtsoftware.com/index.html. + + The function does not block and returns immediately. The request + is scheduled, and its execution is performed asynchronously. The + function returns a unique identifier which is passed by + requestStarted() and requestFinished(). + + When the request is started the requestStarted() signal is + emitted. When it is finished the requestFinished() signal is + emitted. + + \sa setHost() get() post() request() requestStarted() requestFinished() done() +*/ +int Q3Http::head( const QString& path ) +{ + Q3HttpRequestHeader header( QLatin1String("HEAD"), path ); + header.setValue( QLatin1String("Connection"), QLatin1String("Keep-Alive") ); + return addRequest( new Q3HttpPGHRequest( header, (QIODevice*)0, 0 ) ); +} + +/*! + Sends a request to the server set by setHost() or as specified in + the constructor. Uses the \a header as the HTTP request header. + You are responsible for setting up a header that is appropriate + for your request. + + The incoming data comes via the \a data IO device. + + If the IO device \a to is 0 the readyRead() signal is emitted + every time new content data is available to read. + + If the IO device \a to is not 0, the content data of the response + is written directly to the device. Make sure that the \a to + pointer is valid for the duration of the operation (it is safe to + delete it when the requestFinished() signal is emitted). + + The function does not block and returns immediately. The request + is scheduled, and its execution is performed asynchronously. The + function returns a unique identifier which is passed by + requestStarted() and requestFinished(). + + When the request is started the requestStarted() signal is + emitted. When it is finished the requestFinished() signal is + emitted. + + \sa setHost() get() post() head() requestStarted() requestFinished() done() +*/ +int Q3Http::request( const Q3HttpRequestHeader &header, QIODevice *data, QIODevice *to ) +{ + return addRequest( new Q3HttpNormalRequest( header, data, to ) ); +} + +/*! + \overload + + \a data is used as the content data of the HTTP request. +*/ +int Q3Http::request( const Q3HttpRequestHeader &header, const QByteArray &data, QIODevice *to ) +{ + return addRequest( new Q3HttpNormalRequest( header, new QByteArray(data), to ) ); +} + +/*! + Closes the connection; this is useful if you have a keep-alive + connection and want to close it. + + For the requests issued with get(), post() and head(), Q3Http sets + the connection to be keep-alive. You can also do this using the + header you pass to the request() function. Q3Http only closes the + connection to the HTTP server if the response header requires it + to do so. + + The function does not block and returns immediately. The request + is scheduled, and its execution is performed asynchronously. The + function returns a unique identifier which is passed by + requestStarted() and requestFinished(). + + When the request is started the requestStarted() signal is + emitted. When it is finished the requestFinished() signal is + emitted. + + If you want to close the connection immediately, you have to use + abort() instead. + + \sa stateChanged() abort() requestStarted() requestFinished() done() +*/ +int Q3Http::closeConnection() +{ + return addRequest( new Q3HttpCloseRequest() ); +} + +int Q3Http::addRequest( Q3HttpRequest *req ) +{ + d->pending.append( req ); + + if ( d->pending.count() == 1 ) + // don't emit the requestStarted() signal before the id is returned + QTimer::singleShot( 0, this, SLOT(startNextRequest()) ); + + return req->id; +} + +void Q3Http::startNextRequest() +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( r == 0 ) + return; + + d->error = NoError; + d->errorString = QHttp::tr( "Unknown error" ); + + if ( bytesAvailable() ) + readAll(); // clear the data + emit requestStarted( r->id ); + r->start( this ); +} + +void Q3Http::sendRequest() +{ + if ( d->hostname.isNull() ) { + finishedWithError( QHttp::tr("No server set to connect to"), UnknownError ); + return; + } + + killIdleTimer(); + + // Do we need to setup a new connection or can we reuse an + // existing one ? + if ( d->socket.peerName() != d->hostname || d->socket.peerPort() != d->port + || d->socket.state() != Q3Socket::Connection ) { + setState( Q3Http::Connecting ); + d->socket.connectToHost( d->hostname, d->port ); + } else { + slotConnected(); + } + +} + +void Q3Http::finishedWithSuccess() +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( r == 0 ) + return; + + emit requestFinished( r->id, false ); + d->pending.removeFirst(); + if ( d->pending.isEmpty() ) { + emit done( false ); + } else { + startNextRequest(); + } +} + +void Q3Http::finishedWithError( const QString& detail, int errorCode ) +{ + Q3HttpRequest *r = d->pending.getFirst(); + if ( r == 0 ) + return; + + d->error = (Error)errorCode; + d->errorString = detail; + emit requestFinished( r->id, true ); + + d->pending.clear(); + emit done( true ); +} + +void Q3Http::slotClosed() +{ + if ( d->state == Closing ) + return; + + if ( d->state == Reading ) { + if ( d->response.hasKey( QLatin1String("content-length") ) ) { + // We got Content-Length, so did we get all bytes? + if ( d->bytesDone+bytesAvailable() != d->response.contentLength() ) { + finishedWithError( QHttp::tr("Wrong content length"), WrongContentLength ); + } + } + } else if ( d->state == Connecting || d->state == Sending ) { + finishedWithError( QHttp::tr("Server closed connection unexpectedly"), UnexpectedClose ); + } + + d->postDevice = 0; + setState( Closing ); + d->idleTimer = startTimer( 0 ); +} + +void Q3Http::slotConnected() +{ + if ( d->state != Sending ) { + d->bytesDone = 0; + setState( Sending ); + } + + QString str = d->header.toString(); + d->bytesTotal = str.length(); + d->socket.writeBlock( str.latin1(), d->bytesTotal ); +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http: write request header:\n---{\n%s}---", str.latin1() ); +#endif + + if ( d->postDevice ) { + d->bytesTotal += d->postDevice->size(); + } else { + d->bytesTotal += d->buffer.size(); + d->socket.writeBlock( d->buffer.data(), d->buffer.size() ); + d->buffer = QByteArray(); // save memory + } +} + +void Q3Http::slotError( int err ) +{ + d->postDevice = 0; + + if ( d->state == Connecting || d->state == Reading || d->state == Sending ) { + switch ( err ) { + case Q3Socket::ErrConnectionRefused: + finishedWithError( QHttp::tr("Connection refused"), ConnectionRefused ); + break; + case Q3Socket::ErrHostNotFound: + finishedWithError( QHttp::tr("Host %1 not found").arg(d->socket.peerName()), HostNotFound ); + break; + default: + finishedWithError( QHttp::tr("HTTP request failed"), UnknownError ); + break; + } + } + + close(); +} + +void Q3Http::slotBytesWritten( int written ) +{ + d->bytesDone += written; + emit dataSendProgress( d->bytesDone, d->bytesTotal ); + + if ( !d->postDevice ) + return; + + if ( d->socket.bytesToWrite() == 0 ) { + int max = qMin<int>( 4096, d->postDevice->size() - d->postDevice->at() ); + QByteArray arr( max ); + + int n = d->postDevice->readBlock( arr.data(), max ); + if ( n != max ) { + qWarning("Could not read enough bytes from the device"); + close(); + return; + } + if ( d->postDevice->atEnd() ) { + d->postDevice = 0; + } + + d->socket.writeBlock( arr.data(), max ); + } +} + +void Q3Http::slotReadyRead() +{ + if ( d->state != Reading ) { + setState( Reading ); + d->buffer = QByteArray(); + d->readHeader = true; + d->headerStr = QLatin1String(""); + d->bytesDone = 0; + d->chunkedSize = -1; + } + + while ( d->readHeader ) { + bool end = false; + QString tmp; + while ( !end && d->socket.canReadLine() ) { + tmp = QLatin1String(d->socket.readLine()); + if ( tmp == QLatin1String("\r\n") || tmp == QLatin1String("\n") ) + end = true; + else + d->headerStr += tmp; + } + + if ( !end ) + return; + +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http: read response header:\n---{\n%s}---", d->headerStr.latin1() ); +#endif + d->response = Q3HttpResponseHeader( d->headerStr ); + d->headerStr = QLatin1String(""); +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http: read response header:\n---{\n%s}---", d->response.toString().latin1() ); +#endif + // Check header + if ( !d->response.isValid() ) { + finishedWithError( QHttp::tr("Invalid HTTP response header"), InvalidResponseHeader ); + close(); + return; + } + + // The 100-continue header is ignored, because when using the + // POST method, we send both the request header and data in + // one chunk. + if (d->response.statusCode() != 100) { + d->readHeader = false; + if ( d->response.hasKey( QLatin1String("transfer-encoding") ) && + d->response.value( QLatin1String("transfer-encoding") ).lower().contains( QLatin1String("chunked") ) ) + d->chunkedSize = 0; + + emit responseHeaderReceived( d->response ); + } + } + + if ( !d->readHeader ) { + bool everythingRead = false; + + if ( currentRequest().method() == QLatin1String("HEAD") ) { + everythingRead = true; + } else { + Q_ULONG n = d->socket.bytesAvailable(); + QByteArray *arr = 0; + if ( d->chunkedSize != -1 ) { + // transfer-encoding is chunked + for ( ;; ) { + // get chunk size + if ( d->chunkedSize == 0 ) { + if ( !d->socket.canReadLine() ) + break; + QString sizeString = QLatin1String(d->socket.readLine()); + int tPos = sizeString.find( QLatin1Char(';') ); + if ( tPos != -1 ) + sizeString.truncate( tPos ); + bool ok; + d->chunkedSize = sizeString.toInt( &ok, 16 ); + if ( !ok ) { + finishedWithError( QHttp::tr("Invalid HTTP chunked body"), WrongContentLength ); + close(); + delete arr; + return; + } + if ( d->chunkedSize == 0 ) // last-chunk + d->chunkedSize = -2; + } + + // read trailer + while ( d->chunkedSize == -2 && d->socket.canReadLine() ) { + QString read = QLatin1String(d->socket.readLine()); + if ( read == QLatin1String("\r\n") || read == QLatin1String("\n") ) + d->chunkedSize = -1; + } + if ( d->chunkedSize == -1 ) { + everythingRead = true; + break; + } + + // make sure that you can read the terminating CRLF, + // otherwise wait until next time... + n = d->socket.bytesAvailable(); + if ( n == 0 ) + break; + if ( (Q_LONG)n == d->chunkedSize || (Q_LONG)n == d->chunkedSize+1 ) { + n = d->chunkedSize - 1; + if ( n == 0 ) + break; + } + + // read data + uint toRead = QMIN( (Q_LONG)n, (d->chunkedSize < 0 ? (Q_LONG)n : d->chunkedSize) ); + if ( !arr ) + arr = new QByteArray( 0 ); + uint oldArrSize = arr->size(); + arr->resize( oldArrSize + toRead ); + Q_LONG read = d->socket.readBlock( arr->data()+oldArrSize, toRead ); + arr->resize( oldArrSize + read ); + + d->chunkedSize -= read; + + if ( d->chunkedSize == 0 && n - read >= 2 ) { + // read terminating CRLF + char tmp[2]; + d->socket.readBlock( tmp, 2 ); + if ( tmp[0] != '\r' || tmp[1] != '\n' ) { + finishedWithError( QHttp::tr("Invalid HTTP chunked body"), WrongContentLength ); + close(); + delete arr; + return; + } + } + } + } else if ( d->response.hasContentLength() ) { + n = qMin<ulong>( d->response.contentLength() - d->bytesDone, n ); + if ( n > 0 ) { + arr = new QByteArray( n ); + Q_LONG read = d->socket.readBlock( arr->data(), n ); + arr->resize( read ); + } + if ( d->bytesDone + bytesAvailable() + n == d->response.contentLength() ) + everythingRead = true; + } else if ( n > 0 ) { + // workaround for VC++ bug + QByteArray temp = d->socket.readAll(); + arr = new QByteArray( temp ); + } + + if ( arr ) { + n = arr->size(); + if ( d->toDevice ) { + d->toDevice->writeBlock( arr->data(), n ); + delete arr; + d->bytesDone += n; +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http::slotReadyRead(): read %ld bytes (%d bytes done)", n, d->bytesDone ); +#endif + if ( d->response.hasContentLength() ) + emit dataReadProgress( d->bytesDone, d->response.contentLength() ); + else + emit dataReadProgress( d->bytesDone, 0 ); + } else { + d->rba.append( arr ); +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http::slotReadyRead(): read %ld bytes (%ld bytes done)", n, d->bytesDone + bytesAvailable() ); +#endif + if ( d->response.hasContentLength() ) + emit dataReadProgress( d->bytesDone + bytesAvailable(), d->response.contentLength() ); + else + emit dataReadProgress( d->bytesDone + bytesAvailable(), 0 ); + emit readyRead( d->response ); + } + } + } + + if ( everythingRead ) { + // Handle "Connection: close" + if ( d->response.value(QLatin1String("connection")).lower() == QLatin1String("close") ) { + close(); + } else { + setState( Connected ); + // Start a timer, so that we emit the keep alive signal + // "after" this method returned. + d->idleTimer = startTimer( 0 ); + } + } + } +} + +/*! + Returns the current state of the object. When the state changes, + the stateChanged() signal is emitted. + + \sa State stateChanged() +*/ +Q3Http::State Q3Http::state() const +{ + return d->state; +} + +/*! + Returns the last error that occurred. This is useful to find out + what happened when receiving a requestFinished() or a done() + signal with the \c error argument \c true. + + If you start a new request, the error status is reset to \c NoError. +*/ +Q3Http::Error Q3Http::error() const +{ + return d->error; +} + +/*! + Returns a human-readable description of the last error that + occurred. This is useful to present a error message to the user + when receiving a requestFinished() or a done() signal with the \c + error argument \c true. +*/ +QString Q3Http::errorString() const +{ + return d->errorString; +} + +/*! \reimp +*/ +void Q3Http::timerEvent( QTimerEvent *e ) +{ + if ( e->timerId() == d->idleTimer ) { + killTimer( d->idleTimer ); + d->idleTimer = 0; + + if ( d->state == Connected ) { + finishedWithSuccess(); + } else if ( d->state != Unconnected ) { + setState( Unconnected ); + finishedWithSuccess(); + } + } else { + QObject::timerEvent( e ); + } +} + +void Q3Http::killIdleTimer() +{ + if (d->idleTimer) + killTimer( d->idleTimer ); + d->idleTimer = 0; +} + +void Q3Http::setState( int s ) +{ +#if defined(Q3HTTP_DEBUG) + qDebug( "Q3Http state changed %d -> %d", d->state, s ); +#endif + d->state = (State)s; + emit stateChanged( s ); +} + +void Q3Http::close() +{ + // If no connection is open -> ignore + if ( d->state == Closing || d->state == Unconnected ) + return; + + d->postDevice = 0; + setState( Closing ); + + // Already closed ? + if ( !d->socket.isOpen() ) { + d->idleTimer = startTimer( 0 ); + } else { + // Close now. + d->socket.close(); + + // Did close succeed immediately ? + if ( d->socket.state() == Q3Socket::Idle ) { + // Prepare to emit the requestFinished() signal. + d->idleTimer = startTimer( 0 ); + } + } +} + +/********************************************************************** + * + * Q3Http implementation of the Q3NetworkProtocol interface + * + *********************************************************************/ +/*! \reimp +*/ +int Q3Http::supportedOperations() const +{ + return OpGet | OpPut; +} + +/*! \reimp +*/ +void Q3Http::operationGet( Q3NetworkOperation *op ) +{ + connect( this, SIGNAL(readyRead(Q3HttpResponseHeader)), + this, SLOT(clientReply(Q3HttpResponseHeader)) ); + connect( this, SIGNAL(done(bool)), + this, SLOT(clientDone(bool)) ); + connect( this, SIGNAL(stateChanged(int)), + this, SLOT(clientStateChanged(int)) ); + + bytesRead = 0; + op->setState( StInProgress ); + Q3Url u( operationInProgress()->arg( 0 ) ); + Q3HttpRequestHeader header( QLatin1String("GET"), u.encodedPathAndQuery(), 1, 0 ); + header.setValue( QLatin1String("Host"), u.host() ); + setHost( u.host(), u.port() != -1 ? u.port() : 80 ); + request( header ); +} + +/*! \reimp +*/ +void Q3Http::operationPut( Q3NetworkOperation *op ) +{ + connect( this, SIGNAL(readyRead(Q3HttpResponseHeader)), + this, SLOT(clientReply(Q3HttpResponseHeader)) ); + connect( this, SIGNAL(done(bool)), + this, SLOT(clientDone(bool)) ); + connect( this, SIGNAL(stateChanged(int)), + this, SLOT(clientStateChanged(int)) ); + + bytesRead = 0; + op->setState( StInProgress ); + Q3Url u( operationInProgress()->arg( 0 ) ); + Q3HttpRequestHeader header( QLatin1String("POST"), u.encodedPathAndQuery(), 1, 0 ); + header.setValue( QLatin1String("Host"), u.host() ); + setHost( u.host(), u.port() != -1 ? u.port() : 80 ); + request( header, op->rawArg(1) ); +} + +void Q3Http::clientReply( const Q3HttpResponseHeader &rep ) +{ + Q3NetworkOperation *op = operationInProgress(); + if ( op ) { + if ( rep.statusCode() >= 400 && rep.statusCode() < 600 ) { + op->setState( StFailed ); + op->setProtocolDetail( + QString(QLatin1String("%1 %2")).arg(rep.statusCode()).arg(rep.reasonPhrase()) + ); + switch ( rep.statusCode() ) { + case 401: + case 403: + case 405: + op->setErrorCode( ErrPermissionDenied ); + break; + case 404: + op->setErrorCode(ErrFileNotExisting ); + break; + default: + if ( op->operation() == OpGet ) + op->setErrorCode( ErrGet ); + else + op->setErrorCode( ErrPut ); + break; + } + } + // ### In cases of an error, should we still emit the data() signals? + if ( op->operation() == OpGet && bytesAvailable() > 0 ) { + QByteArray ba = readAll(); + emit data( ba, op ); + bytesRead += ba.size(); + if ( rep.hasContentLength() ) { + emit dataTransferProgress( bytesRead, rep.contentLength(), op ); + } + } + } +} + +void Q3Http::clientDone( bool err ) +{ + disconnect( this, SIGNAL(readyRead(Q3HttpResponseHeader)), + this, SLOT(clientReply(Q3HttpResponseHeader)) ); + disconnect( this, SIGNAL(done(bool)), + this, SLOT(clientDone(bool)) ); + disconnect( this, SIGNAL(stateChanged(int)), + this, SLOT(clientStateChanged(int)) ); + + if ( err ) { + Q3NetworkOperation *op = operationInProgress(); + if ( op ) { + op->setState( Q3NetworkProtocol::StFailed ); + op->setProtocolDetail( errorString() ); + switch ( error() ) { + case ConnectionRefused: + op->setErrorCode( ErrHostNotFound ); + break; + case HostNotFound: + op->setErrorCode( ErrHostNotFound ); + break; + default: + if ( op->operation() == OpGet ) + op->setErrorCode( ErrGet ); + else + op->setErrorCode( ErrPut ); + break; + } + emit finished( op ); + } + } else { + Q3NetworkOperation *op = operationInProgress(); + if ( op ) { + if ( op->state() != StFailed ) { + op->setState( Q3NetworkProtocol::StDone ); + op->setErrorCode( Q3NetworkProtocol::NoError ); + } + emit finished( op ); + } + } + +} + +void Q3Http::clientStateChanged( int state ) +{ + if ( url() ) { + switch ( (State)state ) { + case Connecting: + emit connectionStateChanged( ConHostFound, QHttp::tr( "Host %1 found" ).arg( url()->host() ) ); + break; + case Sending: + emit connectionStateChanged( ConConnected, QHttp::tr( "Connected to host %1" ).arg( url()->host() ) ); + break; + case Unconnected: + emit connectionStateChanged( ConClosed, QHttp::tr( "Connection to %1 closed" ).arg( url()->host() ) ); + break; + default: + break; + } + } else { + switch ( (State)state ) { + case Connecting: + emit connectionStateChanged( ConHostFound, QHttp::tr( "Host found" ) ); + break; + case Sending: + emit connectionStateChanged( ConConnected, QHttp::tr( "Connected to host" ) ); + break; + case Unconnected: + emit connectionStateChanged( ConClosed, QHttp::tr( "Connection closed" ) ); + break; + default: + break; + } + } +} + +QT_END_NAMESPACE + +#endif |