diff options
Diffstat (limited to 'tests/auto/qftp')
| -rw-r--r-- | tests/auto/qftp/.gitattributes | 1 | ||||
| -rw-r--r-- | tests/auto/qftp/.gitignore | 2 | ||||
| -rw-r--r-- | tests/auto/qftp/qftp.pro | 19 | ||||
| -rw-r--r-- | tests/auto/qftp/rfc3252.txt | 899 | ||||
| -rw-r--r-- | tests/auto/qftp/tst_qftp.cpp | 2061 |
5 files changed, 2982 insertions, 0 deletions
diff --git a/tests/auto/qftp/.gitattributes b/tests/auto/qftp/.gitattributes new file mode 100644 index 0000000..e04709a --- /dev/null +++ b/tests/auto/qftp/.gitattributes @@ -0,0 +1 @@ +rfc3252.txt -crlf diff --git a/tests/auto/qftp/.gitignore b/tests/auto/qftp/.gitignore new file mode 100644 index 0000000..7a4845d --- /dev/null +++ b/tests/auto/qftp/.gitignore @@ -0,0 +1,2 @@ +tst_qftp +tst_QFtp_activeMode_inittab diff --git a/tests/auto/qftp/qftp.pro b/tests/auto/qftp/qftp.pro new file mode 100644 index 0000000..c060296 --- /dev/null +++ b/tests/auto/qftp/qftp.pro @@ -0,0 +1,19 @@ +load(qttest_p4) +SOURCES += tst_qftp.cpp + + +QT = core network + +wince*: { + addFiles.sources = rfc3252.txt + addFiles.path = . + DEPLOYMENT += addFiles + DEFINES += SRCDIR=\\\"\\\" +} else:symbian* { + addFiles.sources = rfc3252.txt + addFiles.path = . + DEPLOYMENT += addFiles + TARGET.EPOCHEAPSIZE="0x100 0x1000000" +} else { + DEFINES += SRCDIR=\\\"$$PWD/\\\" +} diff --git a/tests/auto/qftp/rfc3252.txt b/tests/auto/qftp/rfc3252.txt new file mode 100644 index 0000000..b80c61b --- /dev/null +++ b/tests/auto/qftp/rfc3252.txt @@ -0,0 +1,899 @@ + + + + + + +Network Working Group H. Kennedy +Request for Comments: 3252 Mimezine +Category: Informational 1 April 2002 + + + Binary Lexical Octet Ad-hoc Transport + +Status of this Memo + + This memo provides information for the Internet community. It does + not specify an Internet standard of any kind. Distribution of this + memo is unlimited. + +Copyright Notice + + Copyright (C) The Internet Society (2002). All Rights Reserved. + +Abstract + + This document defines a reformulation of IP and two transport layer + protocols (TCP and UDP) as XML applications. + +1. Introduction + +1.1. Overview + + This document describes the Binary Lexical Octet Ad-hoc Transport + (BLOAT): a reformulation of a widely-deployed network-layer protocol + (IP [RFC791]), and two associated transport layer protocols (TCP + [RFC793] and UDP [RFC768]) as XML [XML] applications. It also + describes methods for transporting BLOAT over Ethernet and IEEE 802 + networks as well as encapsulating BLOAT in IP for gatewaying BLOAT + across the public Internet. + +1.2. Motivation + + The wild popularity of XML as a basis for application-level protocols + such as the Blocks Extensible Exchange Protocol [RFC3080], the Simple + Object Access Protocol [SOAP], and Jabber [JABBER] prompted + investigation into the possibility of extending the use of XML in the + protocol stack. Using XML at both the transport and network layer in + addition to the application layer would provide for an amazing amount + of power and flexibility while removing dependencies on proprietary + and hard-to-understand binary protocols. This protocol unification + would also allow applications to use a single XML parser for all + aspects of their operation, eliminating developer time spent figuring + out the intricacies of each new protocol, and moving the hard work of + + + + +Kennedy Informational [Page 1] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + parsing to the XML toolset. The use of XML also mitigates concerns + over "network vs. host" byte ordering which is at the root of many + network application bugs. + +1.3. Relation to Existing Protocols + + The reformulations specified in this RFC follow as closely as + possible the spirit of the RFCs on which they are based, and so MAY + contain elements or attributes that would not be needed in a pure + reworking (e.g. length attributes, which are implicit in XML.) + + The layering of network and transport protocols are maintained in + this RFC despite the optimizations that could be made if the line + were somewhat blurred (i.e. merging TCP and IP into a single, larger + element in the DTD) in order to foster future use of this protocol as + a basis for reformulating other protocols (such as ICMP.) + + Other than the encoding, the behavioral aspects of each of the + existing protocols remain unchanged. Routing, address spaces, TCP + congestion control, etc. behave as specified in the extant standards. + Adapting to new standards and experimental algorithm heuristics for + improving performance will become much easier once the move to BLOAT + has been completed. + +1.4. Requirement Levels + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in BCP 14, RFC 2119 + [RFC2119]. + +2. IPoXML + + This protocol MUST be implemented to be compliant with this RFC. + IPoXML is the root protocol REQUIRED for effective use of TCPoXML + (section 3.) and higher-level application protocols. + + The DTD for this document type can be found in section 7.1. + + The routing of IPoXML can be easily implemented on hosts with an XML + parser, as the regular structure lends itself handily to parsing and + validation of the document/datagram and then processing the + destination address, TTL, and checksum before sending it on to its + next-hop. + + The reformulation of IPv4 was chosen over IPv6 [RFC2460] due to the + wider deployment of IPv4 and the fact that implementing IPv6 as XML + would have exceeded the 1500 byte Ethernet MTU. + + + +Kennedy Informational [Page 2] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + All BLOAT implementations MUST use - and specify - the UTF-8 encoding + of RFC 2279 [RFC2279]. All BLOAT document/datagrams MUST be well- + formed and include the XMLDecl. + +2.1. IP Description + + A number of items have changed (for the better) from the original IP + specification. Bit-masks, where present have been converted into + human-readable values. IP addresses are listed in their dotted- + decimal notation [RFC1123]. Length and checksum values are present + as decimal integers. + + To calculate the length and checksum fields of the IP element, a + canonicalized form of the element MUST be used. The canonical form + SHALL have no whitespace (including newline characters) between + elements and only one space character between attributes. There + SHALL NOT be a space following the last attribute in an element. + + An iterative method SHOULD be used to calculate checksums, as the + length field will vary based on the size of the checksum. + + The payload element bears special attention. Due to the character + set restrictions of XML, the payload of IP datagrams (which MAY + contain arbitrary data) MUST be encoded for transport. This RFC + REQUIRES the contents of the payload to be encoded in the base-64 + encoding of RFC 2045 [RFC2045], but removes the requirement that the + encoded output MUST be wrapped on 76-character lines. + + + + + + + + + + + + + + + + + + + + + + + + +Kennedy Informational [Page 3] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + +2.2. Example Datagram + + The following is an example IPoXML datagram with an empty payload: + + <?xml version="1.0" encoding="UTF-8"?> + <!DOCTYPE ip PUBLIC "-//IETF//DTD BLOAT 1.0 IP//EN" "bloat.dtd"> + <ip> + <header length="474"> + <version value="4"/> + <tos precedence="Routine" delay="Normal" throughput="Normal" + relibility="Normal" reserved="0"/> + <total.length value="461"/> + <id value="1"/> + <flags reserved="0" df="dont" mf="last"/> + <offset value="0"/> + <ttl value="255"/> + <protocol value="6"/> + <checksum value="8707"/> + <source address="10.0.0.22"/> + <destination address="10.0.0.1"/> + <options> + <end copied="0" class="0" number="0"/> + </options> + <padding pad="0"/> + </header> + <payload> + </payload> + </ip> + +3. TCPoXML + + This protocol MUST be implemented to be compliant with this RFC. The + DTD for this document type can be found in section 7.2. + +3.1. TCP Description + + A number of items have changed from the original TCP specification. + Bit-masks, where present have been converted into human-readable + values. Length and checksum and port values are present as decimal + integers. + + To calculate the length and checksum fields of the TCP element, a + canonicalized form of the element MUST be used as in section 2.1. + + An iterative method SHOULD be used to calculate checksums as in + section 2.1. + + The payload element MUST be encoded as in section 2.1. + + + +Kennedy Informational [Page 4] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + The TCP offset element was expanded to a maximum of 255 from 16 to + allow for the increased size of the header in XML. + + TCPoXML datagrams encapsulated by IPoXML MAY omit the <?xml?> header + as well as the <!DOCTYPE> declaration. + +3.2. Example Datagram + + The following is an example TCPoXML datagram with an empty payload: + + <?xml version="1.0" encoding="UTF-8"?> + <!DOCTYPE tcp PUBLIC "-//IETF//DTD BLOAT 1.0 TCP//EN" "bloat.dtd"> + <tcp> + <tcp.header> + <src port="31415"/> + <dest port="42424"/> + <sequence number="322622954"/> + <acknowledgement number="689715995"/> + <offset number=""/> + <reserved value="0"/> + <control syn="1" ack="1"/> + <window size="1"/> + <urgent pointer="0"/> + <checksum value="2988"/> + <tcp.options> + <tcp.end kind="0"/> + </tcp.options> + <padding pad="0"/> + </tcp.header> + <payload> + </payload> + </tcp> + +4. UDPoXML + + This protocol MUST be implemented to be compliant with this RFC. The + DTD for this document type can be found in section 7.3. + +4.1. UDP Description + + A number of items have changed from the original UDP specification. + Bit-masks, where present have been converted into human-readable + values. Length and checksum and port values are present as decimal + integers. + + + + + + + +Kennedy Informational [Page 5] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + To calculate the length and checksum fields of the UDP element, a + canonicalized form of the element MUST be used as in section 2.1. An + iterative method SHOULD be used to calculate checksums as in section + 2.1. + + The payload element MUST be encoded as in section 2.1. + + UDPoXML datagrams encapsulated by IPoXML MAY omit the <?xml?> header + as well as the <!DOCTYPE> declaration. + +4.2. Example Datagram + + The following is an example UDPoXML datagram with an empty payload: + + <?xml version="1.0" encoding="UTF-8"?> + <!DOCTYPE udp PUBLIC "-//IETF//DTD BLOAT 1.0 UDP//EN" "bloat.dtd"> + <udp> + <udp.header> + <src port="31415"/> + <dest port="42424"/> + <udp.length value="143"/> + <checksum value="2988"/> + </udp.header> + <payload> + </payload> + </udp> + +5. Network Transport + + This document provides for the transmission of BLOAT datagrams over + two common families of physical layer transport. Future RFCs will + address additional transports as routing vendors catch up to the + specification, and we begin to see BLOAT routed across the Internet + backbone. + +5.1. Ethernet + + BLOAT is encapsulated in Ethernet datagrams as in [RFC894] with the + exception that the type field of the Ethernet frame MUST contain the + value 0xBEEF. The first 5 octets of the Ethernet frame payload will + be 0x3c 3f 78 6d 6c ("<?xml".) + +5.2. IEEE 802 + + BLOAT is encapsulated in IEEE 802 Networks as in [RFC1042] except + that the protocol type code for IPoXML is 0xBEEF. + + + + + +Kennedy Informational [Page 6] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + +6. Gatewaying over IP + + In order to facilitate the gradual introduction of BLOAT into the + public Internet, BLOAT MAY be encapsulated in IP as in [RFC2003] to + gateway between networks that run BLOAT natively on their LANs. + +7. DTDs + + The Transport DTDs (7.2. and 7.3.) build on the definitions in the + Network DTD (7.1.) + + The DTDs are referenced by their PubidLiteral and SystemLiteral (from + [XML]) although it is understood that most IPoXML implementations + will not need to pull down the DTD, as it will normally be embedded + in the implementation, and presents something of a catch-22 if you + need to load part of your network protocol over the network. + +7.1. IPoXML DTD + + <!-- + DTD for IP over XML. + Refer to this DTD as: + + <!DOCTYPE ip PUBLIC "-//IETF//DTD BLOAT 1.0 IP//EN" "bloat.dtd"> + --> + <!-- + DTD data types: + + Digits [0..9]+ + + Precedence "NetworkControl | InternetworkControl | + CRITIC | FlashOverride | Flash | Immediate | + Priority | Routine" + + IP4Addr "dotted-decimal" notation of [RFC1123] + + Class [0..3] + + Sec "Unclassified | Confidential | EFTO | MMMM | PROG | + Restricted | Secret | Top Secret | Reserved" + + Compartments [0..65535] + + Handling [0..65535] + + TCC [0..16777216] + + --> + + + +Kennedy Informational [Page 7] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + <!ENTITY % Digits "CDATA"> + <!ENTITY % Precedence "CDATA"> + <!ENTITY % IP4Addr "CDATA"> + <!ENTITY % Class "CDATA"> + <!ENTITY % Sec "CDATA"> + <!ENTITY % Compartments "CDATA"> + <!ENTITY % Handling "CDATA"> + <!ENTITY % TCC "CDATA"> + + <!ELEMENT ip (header, payload)> + + <!ELEMENT header (version, tos, total.length, id, flags, offset, ttl, + protocol, checksum, source, destination, options, + padding)> + <!-- length of header in 32-bit words --> + <!ATTLIST header + length %Digits; #REQUIRED> + + <!ELEMENT version EMPTY> + <!-- ip version. SHOULD be "4" --> + <!ATTLIST version + value %Digits; #REQUIRED> + + <!ELEMENT tos EMPTY> + <!ATTLIST tos + precedence %Precedence; #REQUIRED + delay (normal | low) #REQUIRED + throughput (normal | high) #REQUIRED + relibility (normal | high) #REQUIRED + reserved CDATA #FIXED "0"> + + <!ELEMENT total.length EMPTY> + <!-- + total length of datagram (header and payload) in octets, MUST be + less than 65,535 (and SHOULD be less than 1024 for IPoXML on local + ethernets). + --> + <!ATTLIST total.length + value %Digits; #REQUIRED> + + <!ELEMENT id EMPTY> + <!-- 0 <= id <= 65,535 --> + <!ATTLIST id + value %Digits; #REQUIRED> + + <!ELEMENT flags EMPTY> + <!-- df = don't fragment, mf = more fragments --> + <!ATTLIST flags + + + +Kennedy Informational [Page 8] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + reserved CDATA #FIXED "0" + df (may|dont) #REQUIRED + mf (last|more) #REQUIRED> + + <!ELEMENT offset EMPTY> + <!-- 0 <= offset <= 8192 measured in 8 octet (64-bit) chunks --> + <!ATTLIST offset + value %Digits; #REQUIRED> + + <!ELEMENT ttl EMPTY> + <!-- 0 <= ttl <= 255 --> + <!ATTLIST ttl + value %Digits; #REQUIRED> + + <!ELEMENT protocol EMPTY> + <!-- 0 <= protocol <= 255 (per IANA) --> + <!ATTLIST protocol + value %Digits; #REQUIRED> + + <!ELEMENT checksum EMPTY> + <!-- 0 <= checksum <= 65535 (over header only) --> + <!ATTLIST checksum + value %Digits; #REQUIRED> + + <!ELEMENT source EMPTY> + <!ATTLIST source + address %IP4Addr; #REQUIRED> + + <!ELEMENT destination EMPTY> + <!ATTLIST destination + address %IP4Addr; #REQUIRED> + + <!ELEMENT options ( end | noop | security | loose | strict | record + | stream | timestamp )*> + + <!ELEMENT end EMPTY> + <!ATTLIST end + copied (0|1) #REQUIRED + class CDATA #FIXED "0" + number CDATA #FIXED "0"> + + <!ELEMENT noop EMPTY> + <!ATTLIST noop + copied (0|1) #REQUIRED + class CDATA #FIXED "0" + number CDATA #FIXED "1"> + + <!ELEMENT security EMPTY> + + + +Kennedy Informational [Page 9] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + <!ATTLIST security + copied CDATA #FIXED "1" + class CDATA #FIXED "0" + number CDATA #FIXED "2" + length CDATA #FIXED "11" + security %Sec; #REQUIRED + compartments %Compartments; #REQUIRED + handling %Handling; #REQUIRED + tcc %TCC; #REQUIRED> + <!ELEMENT loose (hop)+> + <!ATTLIST loose + copied CDATA #FIXED "1" + class CDATA #FIXED "0" + number CDATA #FIXED "3" + length %Digits; #REQUIRED + pointer %Digits; #REQUIRED> + + <!ELEMENT hop EMPTY> + <!ATTLIST hop + address %IP4Addr; #REQUIRED> + + <!ELEMENT strict (hop)+> + <!ATTLIST strict + copied CDATA #FIXED "1" + class CDATA #FIXED "0" + number CDATA #FIXED "9" + length %Digits; #REQUIRED + pointer %Digits; #REQUIRED> + + <!ELEMENT record (hop)+> + <!ATTLIST record + copied CDATA #FIXED "0" + class CDATA #FIXED "0" + number CDATA #FIXED "7" + length %Digits; #REQUIRED + pointer %Digits; #REQUIRED> + + <!ELEMENT stream EMPTY> + <!-- 0 <= id <= 65,535 --> + <!ATTLIST stream + copied CDATA #FIXED "1" + class CDATA #FIXED "0" + number CDATA #FIXED "8" + length CDATA #FIXED "4" + id %Digits; #REQUIRED> + + <!ELEMENT timestamp (tstamp)+> + <!-- 0 <= oflw <=15 --> + + + +Kennedy Informational [Page 10] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + <!ATTLIST timestamp + copied CDATA #FIXED "0" + class CDATA #FIXED "2" + number CDATA #FIXED "4" + length %Digits; #REQUIRED + pointer %Digits; #REQUIRED + oflw %Digits; #REQUIRED + flag (0 | 1 | 3) #REQUIRED> + + <!ELEMENT tstamp EMPTY> + <!ATTLIST tstamp + time %Digits; #REQUIRED + address %IP4Addr; #IMPLIED> + <!-- + padding to bring header to 32-bit boundary. + pad MUST be "0"* + --> + <!ELEMENT padding EMPTY> + <!ATTLIST padding + pad CDATA #REQUIRED> + + <!-- payload MUST be encoded as base-64 [RFC2045], as modified + by section 2.1 of this RFC --> + <!ELEMENT payload (CDATA)> + +7.2. TCPoXML DTD + + <!-- + DTD for TCP over XML. + Refer to this DTD as: + + <!DOCTYPE tcp PUBLIC "-//IETF//DTD BLOAT 1.0 TCP//EN" "bloat.dtd"> + --> + + <!-- the pseudoheader is only included for checksum calculations --> + <!ELEMENT tcp (tcp.pseudoheader?, tcp.header, payload)> + + <!ELEMENT tcp.header (src, dest, sequence, acknowledgement, offset, + reserved, control, window, checksum, urgent, + tcp.options, padding)> + + <!ELEMENT src EMPTY> + <!-- 0 <= port <= 65,535 --> + <!ATTLIST src + port %Digits; #REQUIRED> + + <!ELEMENT dest EMPTY> + <!-- 0 <= port <= 65,535 --> + + + +Kennedy Informational [Page 11] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + <!ATTLIST dest + port %Digits; #REQUIRED> + + <!ELEMENT sequence EMPTY> + <!-- 0 <= number <= 4294967295 --> + <!ATTLIST sequence + number %Digits; #REQUIRED> + + <!ELEMENT acknowledgement EMPTY> + <!-- 0 <= number <= 4294967295 --> + <!ATTLIST acknowledgement + number %Digits; #REQUIRED> + + <!ELEMENT offset EMPTY> + <!-- 0 <= number <= 255 --> + <!ATTLIST offset + number %Digits; #REQUIRED> + + <!ELEMENT reserved EMPTY> + <!ATTLIST reserved + value CDATA #FIXED "0"> + + <!ELEMENT control EMPTY> + <!ATTLIST control + urg (0|1) #IMPLIED + ack (0|1) #IMPLIED + psh (0|1) #IMPLIED + rst (0|1) #IMPLIED + syn (0|1) #IMPLIED + fin (0|1) #IMPLIED> + + <!ELEMENT window EMPTY> + <!-- 0 <= size <= 65,535 --> + <!ATTLIST window + size %Digits; #REQUIRED> + + <!-- + checksum as in ip, but with + the following pseudo-header added into the tcp element: + --> + <!ELEMENT tcp.pseudoheader (source, destination, protocol, + tcp.length)> + + <!-- + tcp header + data length in octets. does not include the size of + + the pseudoheader. + --> + + + +Kennedy Informational [Page 12] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + <!ELEMENT tcp.length EMPTY> + <!ATTLIST tcp.length + value %Digits; #REQUIRED> + + <!ELEMENT urgent EMPTY> + <!-- 0 <= pointer <= 65,535 --> + <!ATTLIST urgent + pointer %Digits; #REQUIRED> + + <!ELEMENT tcp.options (tcp.end | tcp.noop | tcp.mss)+> + + <!ELEMENT tcp.end EMPTY> + <!ATTLIST tcp.end + kind CDATA #FIXED "0"> + + <!ELEMENT tcp.noop EMPTY> + <!ATTLIST tcp.noop + kind CDATA #FIXED "1"> + + <!ELEMENT tcp.mss EMPTY> + <!ATTLIST tcp.mss + kind CDATA #FIXED "2" + length CDATA #FIXED "4" + size %Digits; #REQUIRED> + +7.3. UDPoXML DTD + + <!-- + DTD for UDP over XML. + Refer to this DTD as: + + <!DOCTYPE udp PUBLIC "-//IETF//DTD BLOAT 1.0 UDP//EN" "bloat.dtd"> + --> + + <!ELEMENT udp (udp.pseudoheader?, udp.header, payload)> + + <!ELEMENT udp.header (src, dest, udp.length, checksum)> + + <!ELEMENT udp.pseudoheader (source, destination, protocol, + udp.length)> + + <!-- + udp header + data length in octets. does not include the size of + the pseudoheader. + --> + <!ELEMENT udp.length EMPTY> + <!ATTLIST udp.length + value %Digits; #REQUIRED> + + + +Kennedy Informational [Page 13] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + +8. Security Considerations + + XML, as a subset of SGML, has the same security considerations as + specified in SGML Media Types [RFC1874]. Security considerations + that apply to IP, TCP and UDP also likely apply to BLOAT as it does + not attempt to correct for issues not related to message format. + +9. References + + [JABBER] Miller, J., "Jabber", draft-miller-jabber-00.txt, + February 2002. (Work in Progress) + + [RFC768] Postel, J., "User Datagram Protocol", STD 6, RFC 768, + August 1980. + + [RFC791] Postel, J., "Internet Protocol", STD 5, RFC 791, + September 1981. + + [RFC793] Postel, J., "Transmission Control Protocol", STD 7, RFC + 793, September 1981. + + [RFC894] Hornig, C., "Standard for the Transmission of IP + Datagrams over Ethernet Networks.", RFC 894, April 1984. + + [RFC1042] Postel, J. and J. Reynolds, "Standard for the + Transmission of IP Datagrams Over IEEE 802 Networks", STD + 43, RFC 1042, February 1988. + + [RFC1123] Braden, R., "Requirements for Internet Hosts - + Application and Support", RFC 1123, October 1989. + + [RFC1874] Levinson, E., "SGML Media Types", RFC 1874, December + 1995. + + [RFC2003] Perkins, C., "IP Encapsulation within IP", RFC 2003, + October 1996. + + [RFC2045] Freed, N. and N. Borenstein, "Multipurpose Internet Mail + Extensions (MIME) Part One: Format of Internet Message + Bodies", RFC 2045, November 1996. + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC2279] Yergeau, F., "UTF-8, a transformation format of ISO + 10646", RFC 2279, January 1998. + + + + + +Kennedy Informational [Page 14] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + + [RFC2460] Deering, S. and R. Hinden, "Internet Protocol, Version 6 + (IPv6) Specification", RFC 2460, December 1998. + + [RFC3080] Rose, M., "The Blocks Extensible Exchange Protocol Core", + RFC 3080, March 2001. + + [SOAP] Box, D., Ehnebuske, D., Kakivaya, G., Layman, A., + Mendelsohn, N., Nielsen, H. F., Thatte, S. Winer, D., + "Simple Object Access Protocol (SOAP) 1.1" World Wide Web + Consortium Note, May 2000 http://www.w3.org/TR/SOAP/ + + [XML] Bray, T., Paoli, J., Sperberg-McQueen, C. M., "Extensible + Markup Language (XML)" World Wide Web Consortium + Recommendation REC- xml-19980210. + http://www.w3.org/TR/1998/REC-xml-19980210 + +10. Author's Address + + Hugh Kennedy + Mimezine + 1060 West Addison + Chicago, IL 60613 + USA + + EMail: kennedyh@engin.umich.edu + + + + + + + + + + + + + + + + + + + + + + + + + + +Kennedy Informational [Page 15] + +RFC 3252 Binary Lexical Octet Ad-hoc Transport 1 April 2002 + + +11. Full Copyright Statement + + Copyright (C) The Internet Society (2002). All Rights Reserved. + + This document and translations of it may be copied and furnished to + others, and derivative works that comment on or otherwise explain it + or assist in its implementation may be prepared, copied, published + and distributed, in whole or in part, without restriction of any + kind, provided that the above copyright notice and this paragraph are + included on all such copies and derivative works. However, this + document itself may not be modified in any way, such as by removing + the copyright notice or references to the Internet Society or other + Internet organizations, except as needed for the purpose of + developing Internet standards in which case the procedures for + copyrights defined in the Internet Standards process must be + followed, or as required to translate it into languages other than + English. + + The limited permissions granted above are perpetual and will not be + revoked by the Internet Society or its successors or assigns. + + This document and the information contained herein is provided on an + "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING + TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING + BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION + HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF + MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. + +Acknowledgement + + Funding for the RFC Editor function is currently provided by the + Internet Society. + + + + + + + + + + + + + + + + + + + +Kennedy Informational [Page 16] + diff --git a/tests/auto/qftp/tst_qftp.cpp b/tests/auto/qftp/tst_qftp.cpp new file mode 100644 index 0000000..3f1c511 --- /dev/null +++ b/tests/auto/qftp/tst_qftp.cpp @@ -0,0 +1,2061 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the test suite of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + + +#include <QtTest/QtTest> + +#include <qcoreapplication.h> +#include <qfile.h> +#include <qbuffer.h> +#include "qftp.h" +#include <qmap.h> +#include <time.h> +#include <stdlib.h> +#include <QNetworkProxy> + +#ifndef TEST_QNETWORK_PROXY +#define TEST_QNETWORK_PROXY +#endif +#include "../network-settings.h" + +//TESTED_CLASS= +//TESTED_FILES= + +#ifdef Q_OS_SYMBIAN +// In Symbian OS test data is located in applications private dir +// Application private dir is default serach path for files, so SRCDIR can be set to empty +#define SRCDIR "" +#endif + + + +class tst_QFtp : public QObject +{ + Q_OBJECT + +public: + tst_QFtp(); + virtual ~tst_QFtp(); + + +public slots: + void initTestCase_data(); + void initTestCase(); + void cleanupTestCase(); + void init(); + void cleanup(); +private slots: + void connectToHost_data(); + void connectToHost(); + void connectToUnresponsiveHost(); + void login_data(); + void login(); + void close_data(); + void close(); + + void list_data(); + void list(); + void cd_data(); + void cd(); + void get_data(); + void get(); + void put_data(); + void put(); + void remove(); + void mkdir_data(); + void mkdir(); + void mkdir2(); + void rmdir(); + void rename_data(); + void rename(); + + void commandSequence_data(); + void commandSequence(); + + void abort_data(); + void abort(); + + void bytesAvailable_data(); + void bytesAvailable(); + + void activeMode(); + + void proxy_data(); + void proxy(); + + void binaryAscii(); + + void doneSignal(); + void queueMoreCommandsInDoneSlot(); + +protected slots: + void stateChanged( int ); + void listInfo( const QUrlInfo & ); + void readyRead(); + void dataTransferProgress(qint64, qint64); + + void commandStarted( int ); + void commandFinished( int, bool ); + void done( bool ); + void activeModeDone( bool ); + void mkdir2Slot(int id, bool error); + void cdUpSlot(bool); + +private: + QFtp *newFtp(); + void addCommand( QFtp::Command, int ); + bool fileExists( const QString &host, quint16 port, const QString &user, const QString &password, const QString &file, const QString &cdDir = QString::null ); + bool dirExists( const QString &host, quint16 port, const QString &user, const QString &password, const QString &cdDir, const QString &dirToCreate ); + + void renameInit( const QString &host, const QString &user, const QString &password, const QString &createFile ); + void renameCleanup( const QString &host, const QString &user, const QString &password, const QString &fileToDelete ); + + QFtp *ftp; + + QList<int> ids; // helper to make sure that all expected signals are emitted + int current_id; + + int connectToHost_state; + int close_state; + int login_state; + int cur_state; + struct CommandResult + { + int id; + int success; + }; + QMap< QFtp::Command, CommandResult > resultMap; + typedef QMap<QFtp::Command,CommandResult>::Iterator ResMapIt; + + int done_success; + int commandSequence_success; + + qlonglong bytesAvailable_finishedGet; + qlonglong bytesAvailable_finished; + qlonglong bytesAvailable_done; + + QList<QUrlInfo> listInfo_i; + QByteArray newData_ba; + qlonglong bytesTotal; + qlonglong bytesDone; + + bool inFileDirExistsFunction; + + QString uniqueExtension; +}; + +//#define DUMP_SIGNALS + +const int bytesTotal_init = -10; +const int bytesDone_init = -10; + +tst_QFtp::tst_QFtp() +{ + Q_SET_DEFAULT_IAP +} + +tst_QFtp::~tst_QFtp() +{ +} + +void tst_QFtp::initTestCase_data() +{ + QTest::addColumn<bool>("setProxy"); + QTest::addColumn<int>("proxyType"); + + QTest::newRow("WithoutProxy") << false << 0; +#ifdef TEST_QNETWORK_PROXY + QTest::newRow("WithSocks5Proxy") << true << int(QNetworkProxy::Socks5Proxy); + //### doesn't work well yet. + //QTest::newRow("WithHttpProxy") << true << int(QNetworkProxy::HttpProxy); +#endif +} + +void tst_QFtp::initTestCase() +{ +} + +void tst_QFtp::cleanupTestCase() +{ +} + +void tst_QFtp::init() +{ + QFETCH_GLOBAL(bool, setProxy); + if (setProxy) { + QFETCH_GLOBAL(int, proxyType); + if (proxyType == QNetworkProxy::Socks5Proxy) { + QNetworkProxy::setApplicationProxy(QNetworkProxy(QNetworkProxy::Socks5Proxy, QtNetworkSettings::serverName(), 1080)); + } else if (proxyType == QNetworkProxy::HttpProxy) { + QNetworkProxy::setApplicationProxy(QNetworkProxy(QNetworkProxy::HttpProxy, QtNetworkSettings::serverName(), 3128)); + } + } + + ftp = 0; + + ids.clear(); + current_id = 0; + + resultMap.clear(); + connectToHost_state = -1; + close_state = -1; + login_state = -1; + cur_state = QFtp::Unconnected; + + listInfo_i.clear(); + newData_ba = QByteArray(); + bytesTotal = bytesTotal_init; + bytesDone = bytesDone_init; + + done_success = -1; + commandSequence_success = -1; + + bytesAvailable_finishedGet = 1234567890; + bytesAvailable_finished = 1234567890; + bytesAvailable_done = 1234567890; + + inFileDirExistsFunction = FALSE; + +#if !defined(Q_OS_WINCE) + srand(time(0)); + uniqueExtension = QString("%1%2%3").arg((qulonglong)this).arg(rand()).arg((qulonglong)time(0)); +#else + srand(0); + uniqueExtension = QString("%1%2%3").arg((qulonglong)this).arg(rand()).arg((qulonglong)(0)); +#endif +} + +void tst_QFtp::cleanup() +{ + QFETCH_GLOBAL(bool, setProxy); + if (setProxy) { + QNetworkProxy::setApplicationProxy(QNetworkProxy::DefaultProxy); + } +} + +void tst_QFtp::connectToHost_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<int>("state"); + + QTest::newRow( "ok01" ) << QtNetworkSettings::serverName() << (uint)21 << (int)QFtp::Connected; + QTest::newRow( "error01" ) << QtNetworkSettings::serverName() << (uint)2222 << (int)QFtp::Unconnected; + QTest::newRow( "error02" ) << QString("foo.bar") << (uint)21 << (int)QFtp::Unconnected; +} + +void tst_QFtp::connectToHost() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + + QTestEventLoop::instance().enterLoop( 61 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + QTEST( connectToHost_state, "state" ); + + ResMapIt it = resultMap.find( QFtp::ConnectToHost ); + QVERIFY( it != resultMap.end() ); + QFETCH( int, state ); + if ( state == QFtp::Connected ) { + QVERIFY( it.value().success == 1 ); + } else { + QVERIFY( it.value().success == 0 ); + } +} + +void tst_QFtp::connectToUnresponsiveHost() +{ + QFETCH_GLOBAL(bool, setProxy); + if (setProxy) + QSKIP( "This test takes too long if we test with proxies too", SkipSingle ); + + QString host = "1.2.3.4"; + uint port = 21; + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + + qDebug( "About to connect to host that won't reply (this test takes 60 seconds)" ); + QTestEventLoop::instance().enterLoop( 61 ); +#ifdef Q_OS_WIN + /* On Windows, we do not get a timeout, because Winsock is behaving in a strange way: + We issue two "WSAConnect()" calls, after the first, as a result we get WSAEWOULDBLOCK, + after the second, we get WSAEISCONN, which means that the socket is connected, which cannot be. + However, after some seconds we get a socket error saying that the remote host closed the connection, + which can neither be. For this test, that would actually enable us to finish before timout, but handling that case + (in void QFtpPI::error(QAbstractSocket::SocketError e)) breaks + a lot of other stuff in QFtp, so we just expect this test to fail on Windows. + */ + QEXPECT_FAIL("", "timeout not working due to strange Windows socket behaviour (see source file of this test for explanation)", Abort); +#endif + QVERIFY2(! QTestEventLoop::instance().timeout(), "Network timeout longer than expected (should have been 60 seconds)"); + + QVERIFY( ftp->state() == QFtp::Unconnected); + ResMapIt it = resultMap.find( QFtp::ConnectToHost ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success == 0 ); + + delete ftp; +} + +void tst_QFtp::login_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<int>("success"); + + QTest::newRow( "ok01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << 1; + QTest::newRow( "ok02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftp") << QString() << 1; + QTest::newRow( "ok03" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftp") << QString("foo") << 1; + QTest::newRow( "ok04" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << 1; + + QTest::newRow( "error01" ) << QtNetworkSettings::serverName() << (uint)21 << QString("foo") << QString() << 0; + QTest::newRow( "error02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("foo") << QString("bar") << 0; +} + +void tst_QFtp::login() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Login ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + + if ( it.value().success ) { + QVERIFY( login_state == QFtp::LoggedIn ); + } else { + QVERIFY( login_state != QFtp::LoggedIn ); + } +} + +void tst_QFtp::close_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<bool>("login"); + + QTest::newRow( "login01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << (bool)TRUE; + QTest::newRow( "login02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftp") << QString() << (bool)TRUE; + QTest::newRow( "login03" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftp") << QString("foo") << (bool)TRUE; + QTest::newRow( "login04" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << (bool)TRUE; + + QTest::newRow( "no-login01" ) << QtNetworkSettings::serverName() << (uint)21 << QString("") << QString("") << (bool)FALSE; +} + +void tst_QFtp::close() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( bool, login ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + if ( login ) + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + QCOMPARE( close_state, (int)QFtp::Unconnected ); + + ResMapIt it = resultMap.find( QFtp::Close ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success == 1 ); +} + +void tst_QFtp::list_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("dir"); + QTest::addColumn<int>("success"); + QTest::addColumn<QStringList>("entryNames"); // ### we should rather use a QList<QUrlInfo> here + + QStringList flukeRoot; + flukeRoot << "pub"; + flukeRoot << "qtest"; + QStringList flukeQtest; + flukeQtest << "bigfile"; + flukeQtest << "nonASCII"; + flukeQtest << "rfc3252"; + flukeQtest << "rfc3252.txt"; + flukeQtest << "upload"; + + QTest::newRow( "workDir01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString() << 1 << flukeRoot; + QTest::newRow( "workDir02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString() << 1 << flukeRoot; + + QTest::newRow( "relPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("qtest") << 1 << flukeQtest; + QTest::newRow( "relPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString("qtest") << 1 << flukeQtest; + + QTest::newRow( "absPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("/qtest") << 1 << flukeQtest; + QTest::newRow( "absPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString("/var/ftp/qtest") << 1 << flukeQtest; + + QTest::newRow( "nonExist01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("foo") << 1 << QStringList(); + QTest::newRow( "nonExist02" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("/foo") << 1 << QStringList(); + // ### The microsoft server does not seem to work properly at the moment -- + // I am also not able to open a data connection with other, non-Qt FTP + // clients to it. + // QTest::newRow( "nonExist03" ) << "ftp.microsoft.com" << (uint)21 << QString() << QString() << QString("/foo") << 0 << QStringList(); + + QStringList susePub; + susePub << "README.mirror-policy" << "axp" << "i386" << "ia64" << "install" << "noarch" << "pubring.gpg-build.suse.de" << "update" << "x86_64"; + QTest::newRow( "epsvNotSupported" ) << QString("ftp.funet.fi") << (uint)21 << QString::fromLatin1("ftp") << QString::fromLatin1("root@") << QString("/pub/Linux/suse/suse") << 1 << susePub; +} + +void tst_QFtp::list() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, dir ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::List, ftp->list( dir ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::List ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + QFETCH( QStringList, entryNames ); + QCOMPARE( listInfo_i.count(), entryNames.count() ); + for ( uint i=0; i < (uint) entryNames.count(); i++ ) { + QCOMPARE( listInfo_i[i].name(), entryNames[i] ); + } +} + +void tst_QFtp::cd_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("dir"); + QTest::addColumn<int>("success"); + QTest::addColumn<QStringList>("entryNames"); // ### we should rather use a QList<QUrlInfo> here + + QStringList flukeRoot; + flukeRoot << "qtest"; + QStringList flukeQtest; + flukeQtest << "bigfile"; + flukeQtest << "nonASCII"; + flukeQtest << "rfc3252"; + flukeQtest << "rfc3252.txt"; + flukeQtest << "upload"; + + QTest::newRow( "relPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("qtest") << 1 << flukeQtest; + QTest::newRow( "relPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString("qtest") << 1 << flukeQtest; + + QTest::newRow( "absPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("/qtest") << 1 << flukeQtest; + QTest::newRow( "absPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString("/var/ftp/qtest") << 1 << flukeQtest; + + QTest::newRow( "nonExist01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("foo") << 0 << QStringList(); + QTest::newRow( "nonExist03" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("/foo") << 0 << QStringList(); +} + +void tst_QFtp::cd() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, dir ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Cd, ftp->cd( dir ) ); + addCommand( QFtp::List, ftp->list() ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + + delete ftp; + if ( QTestEventLoop::instance().timeout() ) { + QFAIL( "Network operation timed out" ); + } + + ResMapIt it = resultMap.find( QFtp::Cd ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + QFETCH( QStringList, entryNames ); + QCOMPARE( listInfo_i.count(), entryNames.count() ); + for ( uint i=0; i < (uint) entryNames.count(); i++ ) { + QCOMPARE( listInfo_i[i].name(), entryNames[i] ); + } +} + +void tst_QFtp::get_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("file"); + QTest::addColumn<int>("success"); + QTest::addColumn<QByteArray>("res"); + QTest::addColumn<bool>("useIODevice"); + + // ### move this into external testdata + QFile file( SRCDIR "rfc3252.txt" ); + QVERIFY( file.open( QIODevice::ReadOnly ) ); + QByteArray rfc3252 = file.readAll(); + + // test the two get() overloads in one routine + for ( int i=0; i<2; i++ ) { + QTest::newRow( QString("relPath01_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << "qtest/rfc3252" << 1 << rfc3252 << (bool)(i==1); + QTest::newRow( QString("relPath02_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << "qtest/rfc3252" << 1 << rfc3252 << (bool)(i==1); + + QTest::newRow( QString("absPath01_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << "/qtest/rfc3252" << 1 << rfc3252 << (bool)(i==1); + QTest::newRow( QString("absPath02_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << "/var/ftp/qtest/rfc3252" << 1 << rfc3252 << (bool)(i==1); + + QTest::newRow( QString("nonExist01_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << QString("foo") << 0 << QByteArray() << (bool)(i==1); + QTest::newRow( QString("nonExist02_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << QString("/foo") << 0 << QByteArray() << (bool)(i==1); + } +} + +void tst_QFtp::get() +{ + // for the overload that takes a QIODevice + QByteArray buf_ba; + QBuffer buf( &buf_ba ); + + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, file ); + QFETCH( bool, useIODevice ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + if ( useIODevice ) { + buf.open( QIODevice::WriteOnly ); + addCommand( QFtp::Get, ftp->get( file, &buf ) ); + } else { + addCommand( QFtp::Get, ftp->get( file ) ); + } + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Get ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + if ( useIODevice ) { + QTEST( buf_ba, "res" ); + } else { + QTEST( newData_ba, "res" ); + } + QVERIFY( bytesTotal != bytesTotal_init ); + if ( bytesTotal != -1 ) { + QVERIFY( bytesDone == bytesTotal ); + } + if ( useIODevice ) { + if ( bytesDone != bytesDone_init ) { + QVERIFY( (int)buf_ba.size() == bytesDone ); + } + } else { + if ( bytesDone != bytesDone_init ) { + QVERIFY( (int)newData_ba.size() == bytesDone ); + } + } +} + +void tst_QFtp::put_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("file"); + QTest::addColumn<QByteArray>("fileData"); + QTest::addColumn<bool>("useIODevice"); + QTest::addColumn<int>("success"); + + // ### move this into external testdata + QFile file( SRCDIR "rfc3252.txt" ); + QVERIFY( file.open( QIODevice::ReadOnly ) ); + QByteArray rfc3252 = file.readAll(); + + QByteArray bigData( 10*1024*1024, 0 ); + bigData.fill( 'A' ); + + // test the two put() overloads in one routine + for ( int i=0; i<2; i++ ) { + QTest::newRow( QString("relPath01_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << QString("qtest/upload/rel01_%1") << rfc3252 + << (bool)(i==1) << 1; + /* + QTest::newRow( QString("relPath02_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << QString("qtest/upload/rel02_%1") << rfc3252 + << (bool)(i==1) << 1; + QTest::newRow( QString("relPath03_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << QString("qtest/upload/rel03_%1") << QByteArray() + << (bool)(i==1) << 1; + QTest::newRow( QString("relPath04_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << QString("qtest/upload/rel04_%1") << bigData + << (bool)(i==1) << 1; + + QTest::newRow( QString("absPath01_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << QString("/qtest/upload/abs01_%1") << rfc3252 + << (bool)(i==1) << 1; + QTest::newRow( QString("absPath02_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << QString("/srv/ftp/qtest/upload/abs02_%1") << rfc3252 + << (bool)(i==1) << 1; + + QTest::newRow( QString("nonExist01_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << QString("foo") << QByteArray() + << (bool)(i==1) << 0; + QTest::newRow( QString("nonExist02_%1").arg(i).toLatin1().constData() ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << QString("/foo") << QByteArray() + << (bool)(i==1) << 0; +*/ + } +} + +void tst_QFtp::put() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, file ); + QFETCH( QByteArray, fileData ); + QFETCH( bool, useIODevice ); + +#ifdef Q_OS_WIN + QFETCH_GLOBAL(bool, setProxy); + if (setProxy) { + QFETCH_GLOBAL(int, proxyType); + if (proxyType == QNetworkProxy::Socks5Proxy) { + QSKIP("With socks5 the put() test takes too long time on Windows.", SkipAll); + } + } +#endif + + const int timestep = 50; + + if(file.contains('%')) + file = file.arg(uniqueExtension); + + // for the overload that takes a QIODevice + QBuffer buf_fileData( &fileData ); + buf_fileData.open( QIODevice::ReadOnly ); + + ResMapIt it; + ////////////////////////////////////////////////////////////////// + // upload the file + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + if ( useIODevice ) + addCommand( QFtp::Put, ftp->put( &buf_fileData, file ) ); + else + addCommand( QFtp::Put, ftp->put( fileData, file ) ); + addCommand( QFtp::Close, ftp->close() ); + + for(int time = 0; time <= fileData.length() / 20000; time += timestep) { + QTestEventLoop::instance().enterLoop( timestep ); + if(ftp->currentCommand() == QFtp::None) + break; + } + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + it = resultMap.find( QFtp::Put ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + if ( !it.value().success ) { + QVERIFY( !fileExists( host, port, user, password, file ) ); + return; // the following tests are only meaningful if the file could be put + } + QVERIFY( bytesTotal == (int)fileData.size() ); + QVERIFY( bytesDone == bytesTotal ); + + QVERIFY( fileExists( host, port, user, password, file ) ); + + ////////////////////////////////////////////////////////////////// + // fetch file to make sure that it is equal to the uploaded file + init(); + ftp = newFtp(); + QBuffer buf; + buf.open( QIODevice::WriteOnly ); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Get, ftp->get( file, &buf ) ); + addCommand( QFtp::Close, ftp->close() ); + + for(int time = 0; time <= fileData.length() / 20000; time += timestep) { + QTestEventLoop::instance().enterLoop( timestep ); + if(ftp->currentCommand() == QFtp::None) + break; + } + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + QVERIFY( done_success == 1 ); + QTEST( buf.buffer(), "fileData" ); + + ////////////////////////////////////////////////////////////////// + // cleanup (i.e. remove the file) -- this also tests the remove command + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Remove, ftp->remove( file ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( timestep ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + it = resultMap.find( QFtp::Remove ); + QVERIFY( it != resultMap.end() ); + QCOMPARE( it.value().success, 1 ); + + QVERIFY( !fileExists( host, port, user, password, file ) ); +} + +void tst_QFtp::remove() +{ + DEPENDS_ON( "put" ); +} + +void tst_QFtp::mkdir_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("cdDir"); + QTest::addColumn<QString>("dirToCreate"); + QTest::addColumn<int>("success"); + + QTest::newRow( "relPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << "qtest/upload" << QString("rel01_%1") << 1; + QTest::newRow( "relPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << "qtest/upload" << QString("rel02_%1") << 1; + QTest::newRow( "relPath03" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << "qtest/upload" << QString("rel03_%1") << 1; + + QTest::newRow( "absPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << "." << QString("/qtest/upload/abs01_%1") << 1; + QTest::newRow( "absPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") + << "." << QString("/var/ftp/qtest/upload/abs02_%1") << 1; + + // QTest::newRow( "nonExist01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("foo") << 0; + QTest::newRow( "nonExist01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << "." << QString("foo") << 0; + QTest::newRow( "nonExist02" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() + << "." << QString("/foo") << 0; +} + +void tst_QFtp::mkdir() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, cdDir ); + QFETCH( QString, dirToCreate ); + + if(dirToCreate.contains('%')) + dirToCreate = dirToCreate.arg(uniqueExtension); + + ////////////////////////////////////////////////////////////////// + // create the directory + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Cd, ftp->cd( cdDir ) ); + addCommand( QFtp::Mkdir, ftp->mkdir( dirToCreate ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Mkdir ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + if ( !it.value().success ) { + QVERIFY( !dirExists( host, port, user, password, cdDir, dirToCreate ) ); + return; // the following tests are only meaningful if the dir could be created + } + QVERIFY( dirExists( host, port, user, password, cdDir, dirToCreate ) ); + + ////////////////////////////////////////////////////////////////// + // create the directory again (should always fail!) + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Cd, ftp->cd( cdDir ) ); + addCommand( QFtp::Mkdir, ftp->mkdir( dirToCreate ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + it = resultMap.find( QFtp::Mkdir ); + QVERIFY( it != resultMap.end() ); + QCOMPARE( it.value().success, 0 ); + + ////////////////////////////////////////////////////////////////// + // remove the directory + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Cd, ftp->cd( cdDir ) ); + addCommand( QFtp::Rmdir, ftp->rmdir( dirToCreate ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + it = resultMap.find( QFtp::Rmdir ); + QVERIFY( it != resultMap.end() ); + QCOMPARE( it.value().success, 1 ); + + QVERIFY( !dirExists( host, port, user, password, cdDir, dirToCreate ) ); +} + +void tst_QFtp::mkdir2() +{ + ftp = new QFtp; + ftp->connectToHost(QtNetworkSettings::serverName()); + ftp->login(); + current_id = ftp->cd("kake/test"); + + QEventLoop loop; + connect(ftp, SIGNAL(done(bool)), &loop, SLOT(quit())); + connect(ftp, SIGNAL(commandFinished(int, bool)), this, SLOT(mkdir2Slot(int, bool))); + QTimer::singleShot(5000, &loop, SLOT(quit())); + + QSignalSpy commandStartedSpy(ftp, SIGNAL(commandStarted(int))); + QSignalSpy commandFinishedSpy(ftp, SIGNAL(commandFinished(int, bool))); + + loop.exec(); + + QCOMPARE(commandStartedSpy.count(), 4); // connect, login, cd, mkdir + QCOMPARE(commandFinishedSpy.count(), 4); + + for (int i = 0; i < 4; ++i) + QCOMPARE(commandFinishedSpy.at(i).at(0), commandStartedSpy.at(i).at(0)); + + QVERIFY(!commandFinishedSpy.at(0).at(1).toBool()); + QVERIFY(!commandFinishedSpy.at(1).at(1).toBool()); + QVERIFY(commandFinishedSpy.at(2).at(1).toBool()); + QVERIFY(commandFinishedSpy.at(3).at(1).toBool()); + + delete ftp; +} + +void tst_QFtp::mkdir2Slot(int id, bool) +{ + if (id == current_id) + ftp->mkdir("kake/test"); +} + +void tst_QFtp::rmdir() +{ + DEPENDS_ON( "mkdir" ); +} + +void tst_QFtp::rename_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("cdDir"); + QTest::addColumn<QString>("oldfile"); + QTest::addColumn<QString>("newfile"); + QTest::addColumn<QString>("createFile"); + QTest::addColumn<QString>("renamedFile"); + QTest::addColumn<int>("success"); + + QTest::newRow("relPath01") << QtNetworkSettings::serverName() << QString() << QString() + << "qtest/upload" + << QString("rel_old01_%1") << QString("rel_new01_%1") + << QString("qtest/upload/rel_old01_%1") << QString("qtest/upload/rel_new01_%1") + << 1; + QTest::newRow("relPath02") << QtNetworkSettings::serverName() << QString("ftptest") << "password" + << "qtest/upload" + << QString("rel_old02_%1") << QString("rel_new02_%1") + << QString("qtest/upload/rel_old02_%1") << QString("qtest/upload/rel_new02_%1") + << 1; + QTest::newRow("relPath03") << QtNetworkSettings::serverName() << QString("ftptest") << "password" + << "qtest/upload" + << QString("rel_old03_%1")<< QString("rel_new03_%1") + << QString("qtest/upload/rel_old03_%1") << QString("qtest/upload/rel_new03_%1") + << 1; + + QTest::newRow("absPath01") << QtNetworkSettings::serverName() << QString() << QString() + << QString() + << QString("/qtest/upload/abs_old01_%1") << QString("/qtest/upload/abs_new01_%1") + << QString("/qtest/upload/abs_old01_%1") << QString("/qtest/upload/abs_new01_%1") + << 1; + QTest::newRow("absPath02") << QtNetworkSettings::serverName() << QString("ftptest") << "password" + << QString() + << QString("/var/ftp/qtest/upload/abs_old02_%1") << QString("/var/ftp/qtest/upload/abs_new02_%1") + << QString("/var/ftp/qtest/upload/abs_old02_%1") << QString("/var/ftp/qtest/upload/abs_new02_%1") + << 1; + + QTest::newRow("nonExist01") << QtNetworkSettings::serverName() << QString() << QString() + << QString() + << QString("foo") << "new_foo" + << QString() << QString() + << 0; + QTest::newRow("nonExist02") << QtNetworkSettings::serverName() << QString() << QString() + << QString() + << QString("/foo") << QString("/new_foo") + << QString() << QString() + << 0; +} + +void tst_QFtp::renameInit( const QString &host, const QString &user, const QString &password, const QString &createFile ) +{ + if ( !createFile.isNull() ) { + // upload the file + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Put, ftp->put( QByteArray(), createFile ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Put ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success == 1 ); + + QVERIFY( fileExists( host, 21, user, password, createFile ) ); + } +} + +void tst_QFtp::renameCleanup( const QString &host, const QString &user, const QString &password, const QString &fileToDelete ) +{ + if ( !fileToDelete.isNull() ) { + // cleanup (i.e. remove the file) + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Remove, ftp->remove( fileToDelete ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Remove ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success == 1 ); + + QVERIFY( !fileExists( host, 21, user, password, fileToDelete ) ); + } +} + +void tst_QFtp::rename() +{ + QFETCH( QString, host ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, cdDir ); + QFETCH( QString, oldfile ); + QFETCH( QString, newfile ); + QFETCH( QString, createFile ); + QFETCH( QString, renamedFile ); + + if(oldfile.contains('%')) + oldfile = oldfile.arg(uniqueExtension); + if(newfile.contains('%')) + newfile = newfile.arg(uniqueExtension); + if(createFile.contains('%')) + createFile = createFile.arg(uniqueExtension); + if(renamedFile.contains('%')) + renamedFile = renamedFile.arg(uniqueExtension); + + renameInit( host, user, password, createFile ); + + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + if ( !cdDir.isNull() ) + addCommand( QFtp::Cd, ftp->cd( cdDir ) ); + addCommand( QFtp::Rename, ftp->rename( oldfile, newfile ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Rename ); + QVERIFY( it != resultMap.end() ); + QTEST( it.value().success, "success" ); + + if ( it.value().success ) { + QVERIFY( !fileExists( host, 21, user, password, oldfile, cdDir ) ); + QVERIFY( fileExists( host, 21, user, password, newfile, cdDir ) ); + QVERIFY( fileExists( host, 21, user, password, renamedFile ) ); + } else { + QVERIFY( !fileExists( host, 21, user, password, newfile, cdDir ) ); + QVERIFY( !fileExists( host, 21, user, password, renamedFile ) ); + } + + renameCleanup( host, user, password, renamedFile ); +} + +/* + The commandSequence() test does not test any particular function. It rather + tests a sequence of arbitrary commands specified in the test data. +*/ +class FtpCommand +{ +public: + FtpCommand() : + cmd(QFtp::None) + { } + + FtpCommand( QFtp::Command command ) : + cmd(command) + { } + + FtpCommand( QFtp::Command command, const QStringList &arguments ) : + cmd(command), args(arguments) + { } + + FtpCommand( const FtpCommand &c ) + { *this = c; } + + FtpCommand &operator=( const FtpCommand &c ) + { + this->cmd = c.cmd; + this->args = c.args; + return *this; + } + + QFtp::Command cmd; + QStringList args; +}; +QDataStream &operator<<( QDataStream &s, const FtpCommand &command ) +{ + s << (int)command.cmd; + s << command.args; + return s; +} +QDataStream &operator>>( QDataStream &s, FtpCommand &command ) +{ + int tmp; + s >> tmp; + command.cmd = (QFtp::Command)tmp; + s >> command.args; + return s; +} +Q_DECLARE_METATYPE(QList<FtpCommand>) + +void tst_QFtp::commandSequence_data() +{ + // some "constants" + QStringList argConnectToHost01; + argConnectToHost01 << QtNetworkSettings::serverName() << "21"; + + QStringList argLogin01, argLogin02, argLogin03, argLogin04; + argLogin01 << QString() << QString(); + argLogin02 << "ftp" << QString(); + argLogin03 << "ftp" << "foo"; + argLogin04 << QString("ftptest") << "password"; + + FtpCommand connectToHost01( QFtp::ConnectToHost, argConnectToHost01 ); + FtpCommand login01( QFtp::Login, argLogin01 ); + FtpCommand login02( QFtp::Login, argLogin01 ); + FtpCommand login03( QFtp::Login, argLogin01 ); + FtpCommand login04( QFtp::Login, argLogin01 ); + FtpCommand close01( QFtp::Close ); + + QTest::addColumn<QList<FtpCommand> >("cmds"); + QTest::addColumn<int>("success"); + + // success data + { + QList<FtpCommand> cmds; + cmds << connectToHost01; + QTest::newRow( "simple_ok01" ) << cmds << 1; + } + { + QList<FtpCommand> cmds; + cmds << connectToHost01; + cmds << login01; + QTest::newRow( "simple_ok02" ) << cmds << 1; + } + { + QList<FtpCommand> cmds; + cmds << connectToHost01; + cmds << login01; + cmds << close01; + QTest::newRow( "simple_ok03" ) << cmds << 1; + } + { + QList<FtpCommand> cmds; + cmds << connectToHost01; + cmds << close01; + QTest::newRow( "simple_ok04" ) << cmds << 1; + } + { + QList<FtpCommand> cmds; + cmds << connectToHost01; + cmds << login01; + cmds << close01; + cmds << connectToHost01; + cmds << login02; + cmds << close01; + QTest::newRow( "connect_twice" ) << cmds << 1; + } + + // error data + { + QList<FtpCommand> cmds; + cmds << close01; + QTest::newRow( "error01" ) << cmds << 0; + } + { + QList<FtpCommand> cmds; + cmds << login01; + QTest::newRow( "error02" ) << cmds << 0; + } + { + QList<FtpCommand> cmds; + cmds << login01; + cmds << close01; + QTest::newRow( "error03" ) << cmds << 0; + } + { + QList<FtpCommand> cmds; + cmds << connectToHost01; + cmds << login01; + cmds << close01; + cmds << login01; + QTest::newRow( "error04" ) << cmds << 0; + } +} + +void tst_QFtp::commandSequence() +{ + QFETCH( QList<FtpCommand>, cmds ); + + ftp = newFtp(); + QList<FtpCommand>::iterator it; + for ( it = cmds.begin(); it != cmds.end(); ++it ) { + switch ( (*it).cmd ) { + case QFtp::ConnectToHost: + { + QVERIFY( (*it).args.count() == 2 ); + uint port; + bool portOk; + port = (*it).args[1].toUInt( &portOk ); + QVERIFY( portOk ); + ids << ftp->connectToHost( (*it).args[0], port ); + } + break; + case QFtp::Login: + QVERIFY( (*it).args.count() == 2 ); + ids << ftp->login( (*it).args[0], (*it).args[1] ); + break; + case QFtp::Close: + QVERIFY( (*it).args.count() == 0 ); + ids << ftp->close(); + break; + default: + QFAIL( "Error in test: unexpected enum value" ); + break; + } + } + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + QTEST( commandSequence_success, "success" ); +} + +void tst_QFtp::abort_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("file"); + QTest::addColumn<QByteArray>("uploadData"); + + QTest::newRow( "get_fluke01" ) << QtNetworkSettings::serverName() << (uint)21 << QString("qtest/bigfile") << QByteArray(); + QTest::newRow( "get_fluke02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("qtest/rfc3252") << QByteArray(); + + // Qt/CE and Symbian test environment has to less memory for this test +#if !defined(Q_OS_WINCE) && !defined(Q_OS_SYMBIAN) + QByteArray bigData( 10*1024*1024, 0 ); + bigData.fill( 'B' ); + + QTest::newRow( "put_fluke01" ) << QtNetworkSettings::serverName() << (uint)21 << QString("qtest/upload/abort_put") << bigData; +#endif +} + +void tst_QFtp::abort() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, file ); + QFETCH( QByteArray, uploadData ); + + QFtp::Command cmd; + if ( uploadData.size() == 0 ) + cmd = QFtp::Get; + else + cmd = QFtp::Put; + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login() ); + if ( cmd == QFtp::Get ) + addCommand( cmd, ftp->get( file ) ); + else + addCommand( cmd, ftp->put( uploadData, file ) ); + addCommand( QFtp::Close, ftp->close() ); + + for(int time = 0; time <= uploadData.length() / 30000; time += 30) { + QTestEventLoop::instance().enterLoop( 30 ); + if(ftp->currentCommand() == QFtp::None) + break; + } + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( cmd ); + QVERIFY( it != resultMap.end() ); + // ### how to test the abort? + if ( it.value().success ) { + // The FTP server on fluke is sadly returning a success, even when + // the operation was aborted. So we have to use some heuristics. + if ( host == QtNetworkSettings::serverName() ) { + if ( cmd == QFtp::Get ) { + QVERIFY(bytesDone <= bytesTotal); + } else { + // put commands should always be aborted, since we use really + // big data + QVERIFY( bytesDone != bytesTotal ); + } + } else { + // this could be tested by verifying that no more progress signals are emited + QVERIFY(bytesDone <= bytesTotal); + } + } else { + QVERIFY( bytesDone != bytesTotal ); + } + + if ( cmd == QFtp::Put ) { + ////////////////////////////////////// + // cleanup (i.e. remove the file) + init(); + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login() ); + addCommand( QFtp::Remove, ftp->remove( file ) ); + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + it = resultMap.find( QFtp::Remove ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success == 1 ); + } +} + +void tst_QFtp::bytesAvailable_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<QString>("file"); + QTest::addColumn<int>("type"); + QTest::addColumn<qlonglong>("bytesAvailFinishedGet"); + QTest::addColumn<qlonglong>("bytesAvailFinished"); + QTest::addColumn<qlonglong>("bytesAvailDone"); + + QTest::newRow( "fluke01" ) << QtNetworkSettings::serverName() << QString("qtest/bigfile") << 0 << (qlonglong)519240 << (qlonglong)519240 << (qlonglong)519240; + QTest::newRow( "fluke02" ) << QtNetworkSettings::serverName() << QString("qtest/rfc3252") << 0 << (qlonglong)25962 << (qlonglong)25962 << (qlonglong)25962; + + QTest::newRow( "fluke03" ) << QtNetworkSettings::serverName() << QString("qtest/bigfile") << 1 << (qlonglong)519240 << (qlonglong)0 << (qlonglong)0; + QTest::newRow( "fluke04" ) << QtNetworkSettings::serverName() << QString("qtest/rfc3252") << 1 << (qlonglong)25962 << (qlonglong)0 << (qlonglong)0; +} + +void tst_QFtp::bytesAvailable() +{ + QFETCH( QString, host ); + QFETCH( QString, file ); + QFETCH( int, type ); + + ftp = newFtp(); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host ) ); + addCommand( QFtp::Login, ftp->login() ); + addCommand( QFtp::Get, ftp->get( file ) ); + if ( type != 0 ) + addCommand( QFtp::Close, ftp->close() ); + + QTestEventLoop::instance().enterLoop( 30 ); + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find( QFtp::Get ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success ); + + QFETCH(qlonglong, bytesAvailFinishedGet); + QCOMPARE(bytesAvailable_finishedGet, bytesAvailFinishedGet); + + QFETCH(qlonglong, bytesAvailFinished); + QCOMPARE(bytesAvailable_finished, bytesAvailFinished); + + QFETCH(qlonglong, bytesAvailDone); + QCOMPARE(bytesAvailable_done, bytesAvailDone); + + ftp->readAll(); + QVERIFY( ftp->bytesAvailable() == 0 ); + delete ftp; +} + +void tst_QFtp::activeMode() +{ + QFile file("tst_QFtp_activeMode_inittab"); + file.open(QIODevice::ReadWrite); + QFtp ftp; + ftp.setTransferMode(QFtp::Active); + ftp.connectToHost(QtNetworkSettings::serverName(), 21); + ftp.login(); + ftp.list(); + ftp.get("/qtest/rfc3252.txt", &file); + connect(&ftp, SIGNAL(done(bool)), SLOT(activeModeDone(bool))); + QTestEventLoop::instance().enterLoop(900); + QFile::remove("tst_QFtp_activeMode_inittab"); + QVERIFY(done_success == 1); + +} + +void tst_QFtp::activeModeDone(bool error) +{ + done_success = error ? -1 : 1; + QTestEventLoop::instance().exitLoop(); +} + +void tst_QFtp::proxy_data() +{ + QTest::addColumn<QString>("host"); + QTest::addColumn<uint>("port"); + QTest::addColumn<QString>("user"); + QTest::addColumn<QString>("password"); + QTest::addColumn<QString>("dir"); + QTest::addColumn<int>("success"); + QTest::addColumn<QStringList>("entryNames"); // ### we should rather use a QList<QUrlInfo> here + + QStringList flukeRoot; + flukeRoot << "qtest"; + QStringList flukeQtest; + flukeQtest << "bigfile"; + flukeQtest << "nonASCII"; + flukeQtest << "rfc3252"; + flukeQtest << "rfc3252.txt"; + flukeQtest << "upload"; + + QTest::newRow( "proxy_relPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("qtest") << 1 << flukeQtest; + QTest::newRow( "proxy_relPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString("qtest") << 1 << flukeQtest; + + QTest::newRow( "proxy_absPath01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("/qtest") << 1 << flukeQtest; + QTest::newRow( "proxy_absPath02" ) << QtNetworkSettings::serverName() << (uint)21 << QString("ftptest") << QString("password") << QString("/var/ftp/qtest") << 1 << flukeQtest; + + QTest::newRow( "proxy_nonExist01" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("foo") << 0 << QStringList(); + QTest::newRow( "proxy_nonExist03" ) << QtNetworkSettings::serverName() << (uint)21 << QString() << QString() << QString("/foo") << 0 << QStringList(); +} + +void tst_QFtp::proxy() +{ + QFETCH( QString, host ); + QFETCH( uint, port ); + QFETCH( QString, user ); + QFETCH( QString, password ); + QFETCH( QString, dir ); + + ftp = newFtp(); + addCommand( QFtp::SetProxy, ftp->setProxy( QtNetworkSettings::serverName(), 2121 ) ); + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + addCommand( QFtp::Cd, ftp->cd( dir ) ); + addCommand( QFtp::List, ftp->list() ); + + QTestEventLoop::instance().enterLoop( 30 ); + + delete ftp; + if ( QTestEventLoop::instance().timeout() ) { + QFAIL( "Network operation timed out" ); + } + + ResMapIt it = resultMap.find( QFtp::Cd ); + QVERIFY( it != resultMap.end() ); + QFETCH( int, success ); + QCOMPARE( it.value().success, success ); + QFETCH( QStringList, entryNames ); + QCOMPARE( listInfo_i.count(), entryNames.count() ); + for ( uint i=0; i < (uint) entryNames.count(); i++ ) { + QCOMPARE( listInfo_i[i].name(), entryNames[i] ); + } +} + + +void tst_QFtp::binaryAscii() +{ + QString file = "asciifile%1.txt"; + + if(file.contains('%')) + file = file.arg(uniqueExtension); + + QByteArray putData = "a line of text\r\n"; + + init(); + ftp = newFtp(); + addCommand(QFtp::ConnectToHost, ftp->connectToHost(QtNetworkSettings::serverName(), 21)); + addCommand(QFtp::Login, ftp->login("ftptest", "password")); + addCommand(QFtp::Cd, ftp->cd("qtest/upload")); + addCommand(QFtp::Put, ftp->put(putData, file, QFtp::Ascii)); + addCommand(QFtp::Close, ftp->close()); + + QTestEventLoop::instance().enterLoop( 30 ); + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it = resultMap.find(QFtp::Put); + QVERIFY(it != resultMap.end()); + QVERIFY(it.value().success); + + QByteArray getData; + QBuffer getBuf(&getData); + getBuf.open(QBuffer::WriteOnly); + + init(); + ftp = newFtp(); + addCommand(QFtp::ConnectToHost, ftp->connectToHost(QtNetworkSettings::serverName(), 21)); + addCommand(QFtp::Login, ftp->login("ftptest", "password")); + addCommand(QFtp::Cd, ftp->cd("qtest/upload")); + addCommand(QFtp::Get, ftp->get(file, &getBuf, QFtp::Binary)); + addCommand(QFtp::Close, ftp->close()); + + QTestEventLoop::instance().enterLoop( 30 ); + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + ResMapIt it2 = resultMap.find(QFtp::Get); + QVERIFY(it2 != resultMap.end()); + QVERIFY(it2.value().success); +#ifdef Q_OS_SYMBIAN + QVERIFY(getData.size() == putData.size()); +#else + // most modern ftp servers leave the file as it is by default + // (and do not remove the windows line ending), the -1 below could be + // deleted in the future + QVERIFY(getData.size() == putData.size()-1); +#endif + ////////////////////////////////////////////////////////////////// + // cleanup (i.e. remove the file) -- this also tests the remove command + init(); + ftp = newFtp(); + addCommand(QFtp::ConnectToHost, ftp->connectToHost(QtNetworkSettings::serverName(), 21)); + addCommand(QFtp::Login, ftp->login("ftptest", "password")); + addCommand(QFtp::Cd, ftp->cd("qtest/upload")); + addCommand(QFtp::Remove, ftp->remove(file)); + addCommand(QFtp::Close, ftp->close()); + + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) + QFAIL( "Network operation timed out" ); + + it = resultMap.find( QFtp::Remove ); + QVERIFY( it != resultMap.end() ); + QCOMPARE( it.value().success, 1 ); + + QVERIFY(!fileExists(QtNetworkSettings::serverName(), 21, "ftptest", "password", file)); +} + + +// test QFtp::currentId() and QFtp::currentCommand() +#define CURRENTCOMMAND_TEST \ +{ \ + ResMapIt it; \ + for ( it = resultMap.begin(); it != resultMap.end(); ++it ) { \ + if ( it.value().id == ftp->currentId() ) { \ + QVERIFY( it.key() == ftp->currentCommand() ); \ + } \ +} \ +} + +void tst_QFtp::commandStarted( int id ) +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d:commandStarted( %d )", ftp->currentId(), id ); +#endif + // make sure that the commandStarted and commandFinished are nested correctly + QVERIFY( current_id == 0 ); + current_id = id; + + QVERIFY( !ids.isEmpty() ); + QVERIFY( ids.first() == id ); + if ( ids.count() > 1 ) { + QVERIFY( ftp->hasPendingCommands() ); + } else { + QVERIFY( !ftp->hasPendingCommands() ); + } + + QVERIFY( ftp->currentId() == id ); + QVERIFY( cur_state == ftp->state() ); + CURRENTCOMMAND_TEST; + + QVERIFY( ftp->error() == QFtp::NoError ); +} + +void tst_QFtp::commandFinished( int id, bool error ) +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d:commandFinished( %d, %d ) -- errorString: '%s'", + ftp->currentId(), id, (int)error, ftp->errorString().toLatin1().constData() ); +#endif + if ( ftp->currentCommand() == QFtp::Get ) { + bytesAvailable_finishedGet = ftp->bytesAvailable(); + } + bytesAvailable_finished = ftp->bytesAvailable(); + + // make sure that the commandStarted and commandFinished are nested correctly + QVERIFY( current_id == id ); + current_id = 0; + + QVERIFY( !ids.isEmpty() ); + QVERIFY( ids.first() == id ); + if ( !error && ids.count() > 1) { + QVERIFY( ftp->hasPendingCommands() ); + } else { + QVERIFY( !ftp->hasPendingCommands() ); + } + if ( error ) { + QVERIFY( ftp->error() != QFtp::NoError ); + ids.clear(); + } else { + QVERIFY( ftp->error() == QFtp::NoError ); + ids.pop_front(); + } + + QVERIFY( ftp->currentId() == id ); + QVERIFY( cur_state == ftp->state() ); + CURRENTCOMMAND_TEST; + + if ( QTest::currentTestFunction() != QLatin1String("commandSequence") ) { + ResMapIt it = resultMap.find( ftp->currentCommand() ); + QVERIFY( it != resultMap.end() ); + QVERIFY( it.value().success == -1 ); + if ( error ) + it.value().success = 0; + else + it.value().success = 1; + } +} + +void tst_QFtp::done( bool error ) +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d:done( %d )", ftp->currentId(), (int)error ); +#endif + bytesAvailable_done = ftp->bytesAvailable(); + + QVERIFY( ftp->currentId() == 0 ); + QVERIFY( current_id == 0 ); + QVERIFY( ids.isEmpty() ); + QVERIFY( cur_state == ftp->state() ); + QVERIFY( !ftp->hasPendingCommands() ); + + if ( QTest::currentTestFunction() == QLatin1String("commandSequence") ) { + QVERIFY( commandSequence_success == -1 ); + if ( error ) + commandSequence_success = 0; + else + commandSequence_success = 1; + } + QVERIFY( done_success == -1 ); + if ( error ) { + QVERIFY( ftp->error() != QFtp::NoError ); + done_success = 0; + } else { + QVERIFY( ftp->error() == QFtp::NoError ); + done_success = 1; + } + QTestEventLoop::instance().exitLoop(); +} + +void tst_QFtp::stateChanged( int state ) +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d: stateChanged( %d )", ftp->currentId(), state ); +#endif + QCOMPARE( ftp->currentId(), current_id ); + CURRENTCOMMAND_TEST; + + QVERIFY( state != cur_state ); + QCOMPARE( state, (int)ftp->state() ); + if ( state != QFtp::Unconnected ) { + // make sure that the states are always emitted in the right order (for + // this, we assume an ordering on the enum values, which they have at + // the moment) + QVERIFY( cur_state < state ); + + // make sure that state changes are only emitted in response to certain + // commands + switch ( state ) { + case QFtp::HostLookup: + case QFtp::Connecting: + case QFtp::Connected: + QCOMPARE( (int)ftp->currentCommand(), (int)QFtp::ConnectToHost ); + break; + case QFtp::LoggedIn: + QCOMPARE( (int)ftp->currentCommand(), (int)QFtp::Login ); + break; + case QFtp::Closing: + QCOMPARE( (int)ftp->currentCommand(), (int)QFtp::Close ); + break; + default: + QWARN( QString("Unexpected state '%1'").arg(state).toLatin1().constData() ); + break; + } + } + cur_state = state; + + if ( QTest::currentTestFunction() == QLatin1String("connectToHost") ) { + switch ( state ) { + case QFtp::HostLookup: + case QFtp::Connecting: + case QFtp::LoggedIn: + case QFtp::Closing: + // ignore + break; + case QFtp::Connected: + case QFtp::Unconnected: + QVERIFY( connectToHost_state == -1 ); + connectToHost_state = state; + break; + default: + QWARN( QString("Unknown state '%1'").arg(state).toLatin1().constData() ); + break; + } + } else if ( QTest::currentTestFunction() == QLatin1String("close") ) { + ResMapIt it = resultMap.find( QFtp::Close ); + if ( it!=resultMap.end() && ftp->currentId()==it.value().id ) { + if ( state == QFtp::Closing ) { + QVERIFY( close_state == -1 ); + close_state = state; + } else if ( state == QFtp::Unconnected ) { + QVERIFY( close_state == QFtp::Closing ); + close_state = state; + } + } + } else if ( QTest::currentTestFunction() == QLatin1String("login") ) { + ResMapIt it = resultMap.find( QFtp::Login ); + if ( it!=resultMap.end() && ftp->currentId()==it.value().id ) { + if ( state == QFtp::LoggedIn ) { + QVERIFY( login_state == -1 ); + login_state = state; + } + } + } +} + +void tst_QFtp::listInfo( const QUrlInfo &i ) +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d: listInfo( %s )", ftp->currentId(), i.name().toLatin1().constData() ); +#endif + QCOMPARE( ftp->currentId(), current_id ); + if ( ids.count() > 1 ) { + QVERIFY( ftp->hasPendingCommands() ); + } else { + QVERIFY( !ftp->hasPendingCommands() ); + } + QVERIFY( cur_state == ftp->state() ); + CURRENTCOMMAND_TEST; + + if ( QTest::currentTestFunction()==QLatin1String("list") || QTest::currentTestFunction()==QLatin1String("cd") || QTest::currentTestFunction()==QLatin1String("proxy") || inFileDirExistsFunction ) { + ResMapIt it = resultMap.find( QFtp::List ); + QVERIFY( it != resultMap.end() ); + QVERIFY( ftp->currentId() == it.value().id ); + listInfo_i << i; + } +} + +void tst_QFtp::readyRead() +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d: readyRead(), bytesAvailable == %lu", ftp->currentId(), ftp->bytesAvailable() ); +#endif + QCOMPARE( ftp->currentId(), current_id ); + if ( ids.count() > 1 ) { + QVERIFY( ftp->hasPendingCommands() ); + } else { + QVERIFY( !ftp->hasPendingCommands() ); + } + QVERIFY( cur_state == ftp->state() ); + CURRENTCOMMAND_TEST; + + if ( QTest::currentTestFunction() != QLatin1String("bytesAvailable") ) { + int oldSize = newData_ba.size(); + qlonglong bytesAvail = ftp->bytesAvailable(); + QByteArray ba = ftp->readAll(); + QVERIFY( ba.size() == (int) bytesAvail ); + newData_ba.resize( oldSize + ba.size() ); + memcpy( newData_ba.data()+oldSize, ba.data(), ba.size() ); + + if ( bytesTotal != -1 ) { + QVERIFY( (int)newData_ba.size() <= bytesTotal ); + } + QVERIFY( (int)newData_ba.size() == bytesDone ); + } +} + +void tst_QFtp::dataTransferProgress( qint64 done, qint64 total ) +{ +#if defined( DUMP_SIGNALS ) + qDebug( "%d: dataTransferProgress( %lli, %lli )", ftp->currentId(), done, total ); +#endif + QCOMPARE( ftp->currentId(), current_id ); + if ( ids.count() > 1 ) { + QVERIFY( ftp->hasPendingCommands() ); + } else { + QVERIFY( !ftp->hasPendingCommands() ); + } + QVERIFY( cur_state == ftp->state() ); + CURRENTCOMMAND_TEST; + + if ( bytesTotal == bytesTotal_init ) { + bytesTotal = total; + } else { + QVERIFY( bytesTotal == total ); + } + + QVERIFY( bytesTotal != bytesTotal_init ); + QVERIFY( bytesDone <= done ); + bytesDone = done; + if ( bytesTotal != -1 ) { + QVERIFY( bytesDone <= bytesTotal ); + } + + if ( QTest::currentTestFunction() == QLatin1String("abort") ) { + // ### it would be nice if we could specify in our testdata when to do + // the abort + if ( done >= total/100000 ) { + if ( ids.count() != 1 ) { + // do abort only once + int tmpId = ids.first(); + ids.clear(); + ids << tmpId; + ftp->abort(); + } + } + } +} + + +QFtp *tst_QFtp::newFtp() +{ + QFtp *nFtp = new QFtp( this ); + connect( nFtp, SIGNAL(commandStarted(int)), + SLOT(commandStarted(int)) ); + connect( nFtp, SIGNAL(commandFinished(int,bool)), + SLOT(commandFinished(int,bool)) ); + connect( nFtp, SIGNAL(done(bool)), + SLOT(done(bool)) ); + connect( nFtp, SIGNAL(stateChanged(int)), + SLOT(stateChanged(int)) ); + connect( nFtp, SIGNAL(listInfo(const QUrlInfo&)), + SLOT(listInfo(const QUrlInfo&)) ); + connect( nFtp, SIGNAL(readyRead()), + SLOT(readyRead()) ); + connect( nFtp, SIGNAL(dataTransferProgress(qint64, qint64)), + SLOT(dataTransferProgress(qint64, qint64)) ); + + return nFtp; +} + +void tst_QFtp::addCommand( QFtp::Command cmd, int id ) +{ + ids << id; + CommandResult res; + res.id = id; + res.success = -1; + resultMap[ cmd ] = res; +} + +bool tst_QFtp::fileExists( const QString &host, quint16 port, const QString &user, const QString &password, const QString &file, const QString &cdDir ) +{ + init(); + ftp = newFtp(); + // ### make these tests work + if (ftp->currentId() != 0) { + qWarning("ftp->currentId() != 0"); + return FALSE; + } + + if (ftp->state() != QFtp::Unconnected) { + qWarning("ftp->state() != QFtp::Unconnected"); + return FALSE; + } + + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + if ( !cdDir.isNull() ) + addCommand( QFtp::Cd, ftp->cd( cdDir ) ); + addCommand( QFtp::List, ftp->list( file ) ); + addCommand( QFtp::Close, ftp->close() ); + + inFileDirExistsFunction = TRUE; + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) { + // ### make this test work + qWarning("Network operation timed out"); + return FALSE; + } + inFileDirExistsFunction = FALSE; + + ResMapIt it = resultMap.find( QFtp::ConnectToHost ); + // ### make these tests work + if (it == resultMap.end()) { + qWarning("it != resultMap.end()"); + return FALSE; + } + + if (it.value().success == -1) { + qWarning("it.value().success != -1"); + return FALSE; + } + + if ( it.value().success == 1 ) { + for ( uint i=0; i < (uint) listInfo_i.count(); i++ ) { + if ( QFileInfo(listInfo_i[i].name()).fileName() == QFileInfo(file).fileName() ) + return TRUE; + } + } + + //this is not a good warning considering sometime this function is used to test that a file does not exist + //qWarning("file doesn't exist"); + return FALSE; +} + +bool tst_QFtp::dirExists( const QString &host, quint16 port, const QString &user, const QString &password, const QString &cdDir, const QString &dirToCreate ) +{ + init(); + ftp = newFtp(); + // ### make these tests work + // QCOMPARE( ftp->currentId(), 0 ); + // QCOMPARE( (int)ftp->state(), (int)QFtp::Unconnected ); + + addCommand( QFtp::ConnectToHost, ftp->connectToHost( host, port ) ); + addCommand( QFtp::Login, ftp->login( user, password ) ); + if ( dirToCreate.startsWith( "/" ) ) + addCommand( QFtp::Cd, ftp->cd( dirToCreate ) ); + else + addCommand( QFtp::Cd, ftp->cd( cdDir + "/" + dirToCreate ) ); + addCommand( QFtp::Close, ftp->close() ); + + inFileDirExistsFunction = TRUE; + QTestEventLoop::instance().enterLoop( 30 ); + delete ftp; + if ( QTestEventLoop::instance().timeout() ) { + // ### make this test work + // QFAIL( "Network operation timed out" ); + return FALSE; + } + inFileDirExistsFunction = FALSE; + + ResMapIt it = resultMap.find( QFtp::Cd ); + // ### make these tests work + // QVERIFY( it != resultMap.end() ); + // QVERIFY( it.value().success != -1 ); + return it.value().success == 1; +} + +void tst_QFtp::doneSignal() +{ + QFtp ftp; + QSignalSpy spy(&ftp, SIGNAL(done(bool))); + + ftp.connectToHost(QtNetworkSettings::serverName()); + ftp.login("anonymous"); + ftp.list(); + ftp.close(); + + done_success = 0; + while ( ftp.hasPendingCommands() ) + QCoreApplication::instance()->processEvents(); + QTest::qWait(200); + + QCOMPARE(spy.count(), 1); + QCOMPARE(spy.first().first().toBool(), false); +} + +void tst_QFtp::queueMoreCommandsInDoneSlot() +{ + QSKIP("Task 127050 && 113966", SkipSingle); + + QFtp ftp; + QSignalSpy doneSpy(&ftp, SIGNAL(done(bool))); + QSignalSpy commandFinishedSpy(&ftp, SIGNAL(commandFinished(int, bool))); + + this->ftp = &ftp; + connect(&ftp, SIGNAL(done(bool)), this, SLOT(cdUpSlot(bool))); + + ftp.connectToHost("ftp.trolltech.com"); + ftp.login(); + ftp.cd("qt"); + ftp.rmdir("qtest-removedir-noexist"); + + while ( ftp.hasPendingCommands() || ftp.currentCommand() != QFtp::None ) { + QCoreApplication::instance()->processEvents(QEventLoop::AllEvents + | QEventLoop::WaitForMoreEvents); + } + + QCOMPARE(doneSpy.count(), 2); + QCOMPARE(doneSpy.first().first().toBool(), true); + QCOMPARE(doneSpy.last().first().toBool(), false); + + QCOMPARE(commandFinishedSpy.count(), 6); + int firstId = commandFinishedSpy.at(0).at(0).toInt(); + QCOMPARE(commandFinishedSpy.at(0).at(1).toBool(), false); + QCOMPARE(commandFinishedSpy.at(1).at(0).toInt(), firstId + 1); + QCOMPARE(commandFinishedSpy.at(1).at(1).toBool(), false); + QCOMPARE(commandFinishedSpy.at(2).at(0).toInt(), firstId + 2); + QCOMPARE(commandFinishedSpy.at(2).at(1).toBool(), false); + QCOMPARE(commandFinishedSpy.at(3).at(0).toInt(), firstId + 3); + QCOMPARE(commandFinishedSpy.at(3).at(1).toBool(), true); + QCOMPARE(commandFinishedSpy.at(4).at(0).toInt(), firstId + 4); + QCOMPARE(commandFinishedSpy.at(4).at(1).toBool(), false); + QCOMPARE(commandFinishedSpy.at(5).at(0).toInt(), firstId + 5); + QCOMPARE(commandFinishedSpy.at(5).at(1).toBool(), false); + + this->ftp = 0; +} + +void tst_QFtp::cdUpSlot(bool error) +{ + if (error) { + ftp->cd(".."); + ftp->cd("qt"); + } +} + +QTEST_MAIN(tst_QFtp) + +#include "tst_qftp.moc" |