diff options
Diffstat (limited to 'tools/shared/qtgradienteditor/qtgradientdialog.cpp')
| -rw-r--r-- | tools/shared/qtgradienteditor/qtgradientdialog.cpp | 359 |
1 files changed, 359 insertions, 0 deletions
diff --git a/tools/shared/qtgradienteditor/qtgradientdialog.cpp b/tools/shared/qtgradienteditor/qtgradientdialog.cpp new file mode 100644 index 0000000..032cb16 --- /dev/null +++ b/tools/shared/qtgradienteditor/qtgradientdialog.cpp @@ -0,0 +1,359 @@ +/**************************************************************************** +** +** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). +** Contact: Qt Software Information (qt-info@nokia.com) +** +** This file is part of the tools applications of the Qt Toolkit. +** +** $QT_BEGIN_LICENSE:LGPL$ +** No Commercial Usage +** This file contains pre-release code and may not be distributed. +** You may use this file in accordance with the terms and conditions +** contained in the either Technology Preview License Agreement or the +** Beta Release License Agreement. +** +** GNU Lesser General Public License Usage +** Alternatively, this file may be used under the terms of the GNU Lesser +** General Public License version 2.1 as published by the Free Software +** Foundation and appearing in the file LICENSE.LGPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU Lesser General Public License version 2.1 requirements +** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. +** +** In addition, as a special exception, Nokia gives you certain +** additional rights. These rights are described in the Nokia Qt LGPL +** Exception version 1.0, included in the file LGPL_EXCEPTION.txt in this +** package. +** +** GNU General Public License Usage +** Alternatively, this file may be used under the terms of the GNU +** General Public License version 3.0 as published by the Free Software +** Foundation and appearing in the file LICENSE.GPL included in the +** packaging of this file. Please review the following information to +** ensure the GNU General Public License version 3.0 requirements will be +** met: http://www.gnu.org/copyleft/gpl.html. +** +** If you are unsure which license is appropriate for your use, please +** contact the sales department at qt-sales@nokia.com. +** $QT_END_LICENSE$ +** +****************************************************************************/ + +/* +TRANSLATOR qdesigner_internal::QtGradientDialog +*/ + +#include "qtgradientdialog.h" +#include "ui_qtgradientdialog.h" +#include <QtGui/QPushButton> + +QT_BEGIN_NAMESPACE + +class QtGradientDialogPrivate +{ + QtGradientDialog *q_ptr; + Q_DECLARE_PUBLIC(QtGradientDialog) +public: + + void slotAboutToShowDetails(bool details, int extensionWidthHint); + + Ui::QtGradientDialog m_ui; +}; + +void QtGradientDialogPrivate::slotAboutToShowDetails(bool details, int extensionWidthHint) +{ + if (details) { + q_ptr->resize(q_ptr->size() + QSize(extensionWidthHint, 0)); + } else { + q_ptr->setMinimumSize(1, 1); + q_ptr->resize(q_ptr->size() - QSize(extensionWidthHint, 0)); + q_ptr->setMinimumSize(0, 0); + } +} + +/*! + \class QtGradientDialog + + \brief The QtGradientDialog class provides a dialog for specifying gradients. + + The gradient dialog's function is to allow users to edit gradients. + For example, you might use this in a drawing program to allow the user to set the brush gradient. + + \table + \row + \o \inlineimage qtgradientdialog.png + \o \inlineimage qtgradientdialogextension.png + \header + \o Details extension hidden + \o Details extension visible + \endtable + + Starting from the top of the dialog there are several buttons: + + \image qtgradientdialogtopbuttons.png + + The first three buttons allow for changing a type of the gradient (QGradient::Type), while the second three allow for + changing spread of the gradient (QGradient::Spread). The last button shows or hides the details extension of the dialog. + Conceptually the default view with hidden details provides the full functional control over gradient editing. + The additional extension with details allows to set gradient's parameters more precisely. The visibility + of extension can be controlled by detailsVisible property. Moreover, if you don't want the user to + switch on or off the visibility of extension you can set the detailsButtonVisible property to false. + + Below top buttons there is an area where edited gradient is interactively previewed. + In addition the user can edit gradient type's specific parameters directly in this area by dragging + appropriate handles. + + \table + \row + \o \inlineimage qtgradientdialoglineareditor.png + \o \inlineimage qtgradientdialogradialeditor.png + \o \inlineimage qtgradientdialogconicaleditor.png + \header + \o Editing linear type + \o Editing radial type + \o Editing conical type + \row + \o The user can change the start and final point positions by dragging the circular handles. + \o The user can change the center and focal point positions by dragging the circular handles + and can change the gradient's radius by dragging horizontal or vertical line. + \o The user can change the center point by dragging the circular handle + and can change the gradient's angle by dragging the big wheel. + \endtable + + In the middle of the dialog there is an area where the user can edit gradient stops. + + \table + \row + \o \inlineimage qtgradientdialogstops.png + \o \inlineimage qtgradientdialogstopszoomed.png + \endtable + + The top part of this area contains stop handles, and bottom part shows the preview of gradient stops path. + In order to create a new gradient stop double click inside the view over the desired position. + If you double click on existing stop handle in the top part of the view, clicked handle will be duplicated + (duplicate will contain the same color). + The stop can be activated by clicking on its handle. You can activate previous or next stop by pressing + left or right key respectively. To jump to the first or last stop press home or end key respectively. + The gradient stops editor supports multiselection. + Clicking a handle holding the shift modifier key down will select a range of stops between + the active stop and clicked one. Clicking a handle holding control modifier key down will remove from or + add to selection the clicked stop depending if it was or wasn't already selected respectively. + Multiselection can also be created using rubberband (by pressing the left mouse button outside + of any handle and dragging). + Sometimes it's hard to select a stop because its handle can be partially covered by other handle. + In that case the user can zoom in the view by spinning mouse wheel. + The selected stop handles can be moved by drag & drop. In order to remove selected stops press delete key. + For convenience context menu is provided with the following actions: + + \list + \o New Stop - creates a new gradient stop + \o Delete - removes the active and all selected stops + \o Flip All - mirrors all stops + \o Select All - selects all stops + \o Zoom In - zooms in + \o Zoom Out - zooms out + \o Zoom All - goes back to original 100% zoom + \endlist + + The bottom part of the QtGradientDialog contains a set of widgets allowing to control the color of + the active and selected stops. + + \table + \row + \o \inlineimage qtgradientdialogcolorhsv.png + \o \inlineimage qtgradientdialogcolorrgb.png + \endtable + + + The color button shows the color of the active gradient stop. It also allows for choosing + a color from standard color dialog and applying it to the + active stop and all selected stops. It's also possible to drag a color directly from the color button + and to drop it in gradient stops editor at desired position (it will create new stop with dragged color) + or at desired stop handle (it will change the color of that handle). + + To the right of color button there is a set of 2 radio buttons which allows to switch between + HVS and RGB color spec. + + Finally there are 4 color sliders working either in HSVA (hue saturation value alpha) or + RGBA (red green blue alpha) mode, depending on which radio button is chosen. The radio buttons + can be controlled programatically by spec() and setSpec() methods. The sliders show the + color of the active stop. By double clicking inside color slider you can set directly the desired color. + Changes of slider's are applied to stop selection in the way that the color + component being changed is applied to stops in selection only, while other components + remain unchanged in selected stops (e.g. when the user is changing the saturation, + new saturation is applied to selected stops preventing original hue, value and alpha in multiselection). + + The convenient static functions getGradient() provide modal gradient dialogs, e.g.: + + \snippet doc/src/snippets/code/tools_shared_qtgradienteditor_qtgradientdialog.cpp 0 + + In order to have more control over the properties of QtGradientDialog use + standard QDialog::exec() method: + + \snippet doc/src/snippets/code/tools_shared_qtgradienteditor_qtgradientdialog.cpp 1 + + \sa {Gradient View Example} +*/ + +/*! + Constructs a gradient dialog with \a parent as parent widget. +*/ + +QtGradientDialog::QtGradientDialog(QWidget *parent) + : QDialog(parent) +{ +// setWindowFlags(windowFlags() & ~Qt::WindowContextHelpButtonHint); + d_ptr = new QtGradientDialogPrivate(); + d_ptr->q_ptr = this; + d_ptr->m_ui.setupUi(this); + QPushButton *button = d_ptr->m_ui.buttonBox->button(QDialogButtonBox::Ok); + if (button) + button->setAutoDefault(false); + button = d_ptr->m_ui.buttonBox->button(QDialogButtonBox::Cancel); + if (button) + button->setAutoDefault(false); + connect(d_ptr->m_ui.gradientEditor, SIGNAL(aboutToShowDetails(bool, int)), + this, SLOT(slotAboutToShowDetails(bool, int))); +} + +/*! + Destroys the gradient dialog +*/ + +QtGradientDialog::~QtGradientDialog() +{ + delete d_ptr; +} + +/*! + \property QtGradientDialog::gradient + \brief the gradient of the dialog +*/ +void QtGradientDialog::setGradient(const QGradient &gradient) +{ + d_ptr->m_ui.gradientEditor->setGradient(gradient); +} + +QGradient QtGradientDialog::gradient() const +{ + return d_ptr->m_ui.gradientEditor->gradient(); +} + +/*! + \property QtGradientDialog::backgroundCheckered + \brief whether the background of widgets able to show the colors with alpha channel is checkered. + + \table + \row + \o \inlineimage qtgradientdialogbackgroundcheckered.png + \o \inlineimage qtgradientdialogbackgroundtransparent.png + \row + \o \snippet doc/src/snippets/code/tools_shared_qtgradienteditor_qtgradientdialog.cpp 2 + \o \snippet doc/src/snippets/code/tools_shared_qtgradienteditor_qtgradientdialog.cpp 3 + \endtable + + When this property is set to true (the default) widgets inside gradient dialog like color button, + color sliders, gradient stops editor and gradient editor will show checkered background + in case of transparent colors. Otherwise the background of these widgets is transparent. +*/ + +bool QtGradientDialog::isBackgroundCheckered() const +{ + return d_ptr->m_ui.gradientEditor->isBackgroundCheckered(); +} + +void QtGradientDialog::setBackgroundCheckered(bool checkered) +{ + d_ptr->m_ui.gradientEditor->setBackgroundCheckered(checkered); +} + +/*! + \property QtGradientDialog::detailsVisible + \brief whether details extension is visible. + + When this property is set to true the details extension is visible. By default + this property is set to false and the details extension is hidden. + + \sa detailsButtonVisible +*/ +bool QtGradientDialog::detailsVisible() const +{ + return d_ptr->m_ui.gradientEditor->detailsVisible(); +} + +void QtGradientDialog::setDetailsVisible(bool visible) +{ + d_ptr->m_ui.gradientEditor->setDetailsVisible(visible); +} + +/*! + \property QtGradientDialog::detailsButtonVisible + \brief whether the details button allowing for showing and hiding details extension is visible. + + When this property is set to true (the default) the details button is visible and the user + can show and hide details extension interactively. Otherwise the button is hidden and the details + extension is always visible or hidded depending on the value of detailsVisible property. + + \sa detailsVisible +*/ +bool QtGradientDialog::isDetailsButtonVisible() const +{ + return d_ptr->m_ui.gradientEditor->isDetailsButtonVisible(); +} + +void QtGradientDialog::setDetailsButtonVisible(bool visible) +{ + d_ptr->m_ui.gradientEditor->setDetailsButtonVisible(visible); +} + +/*! + Returns the current QColor::Spec used for the color sliders in the dialog. +*/ +QColor::Spec QtGradientDialog::spec() const +{ + return d_ptr->m_ui.gradientEditor->spec(); +} + +/*! + Sets the current QColor::Spec to \a spec used for the color sliders in the dialog. +*/ +void QtGradientDialog::setSpec(QColor::Spec spec) +{ + d_ptr->m_ui.gradientEditor->setSpec(spec); +} + +/*! + Executes a modal gradient dialog, lets the user to specify a gradient, and returns that gradient. + + If the user clicks \gui OK, the gradient specified by the user is returned. If the user clicks \gui Cancel, the \a initial gradient is returned. + + The dialog is constructed with the given \a parent. \a caption is shown as the window title of the dialog and + \a initial is the initial gradient shown in the dialog. If the \a ok parameter is not-null, + the value it refers to is set to true if the user clicks \gui OK, and set to false if the user clicks \gui Cancel. +*/ +QGradient QtGradientDialog::getGradient(bool *ok, const QGradient &initial, QWidget *parent, const QString &caption) +{ + QtGradientDialog dlg(parent); + if (!caption.isEmpty()) + dlg.setWindowTitle(caption); + dlg.setGradient(initial); + const int res = dlg.exec(); + if (ok) { + *ok = (res == QDialog::Accepted) ? true : false; + } + if (res == QDialog::Accepted) + return dlg.gradient(); + return initial; +} + +/*! + This method calls getGradient(ok, QLinearGradient(), parent, caption). +*/ +QGradient QtGradientDialog::getGradient(bool *ok, QWidget *parent, const QString &caption) +{ + return getGradient(ok, QLinearGradient(), parent, caption); +} + +QT_END_NAMESPACE + +#include "moc_qtgradientdialog.cpp" |