From d904fe2273be5d39b54b987eef6b9cc0d1b85c4b Mon Sep 17 00:00:00 2001 From: Martin Jones Date: Fri, 13 Aug 2010 10:10:38 +1000 Subject: Fix configure -help output. declarative module is built by default. Task-number: QTBUG-12840 --- configure | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/configure b/configure index 35fe2eb..7c3f9a3 100755 --- a/configure +++ b/configure @@ -3677,8 +3677,8 @@ fi -no-scripttools .... Do not build the QtScriptTools module. + -scripttools ....... Build the QtScriptTools module. - + -no-declarative .....Do not build the declarative module. - -declarative ....... Build the declarative module. + -no-declarative .....Do not build the declarative module. + + -declarative ....... Build the declarative module. -platform target ... The operating system and compiler you are building on ($PLATFORM). -- cgit v0.12 From f9fe93e6e85294274d4e0ce81db09783cfacd733 Mon Sep 17 00:00:00 2001 From: Michael Brasser Date: Fri, 13 Aug 2010 12:22:46 +1000 Subject: Clear previous animation data for non-triggering animations. We need to clear the data from the last run if the animation doesn't match any of the state actions (or if there are no actions). Task-number: QTBUG-12805 --- src/declarative/util/qdeclarativeanimation.cpp | 2 ++ .../data/nonTransitionBug.qml | 30 +++++++++++++++++++++ .../tst_qdeclarativeanimations.cpp | 31 ++++++++++++++++++++++ 3 files changed, 63 insertions(+) create mode 100644 tests/auto/declarative/qdeclarativeanimations/data/nonTransitionBug.qml diff --git a/src/declarative/util/qdeclarativeanimation.cpp b/src/declarative/util/qdeclarativeanimation.cpp index a747706..2fca09d 100644 --- a/src/declarative/util/qdeclarativeanimation.cpp +++ b/src/declarative/util/qdeclarativeanimation.cpp @@ -2392,6 +2392,8 @@ void QDeclarativePropertyAnimation::transition(QDeclarativeStateActions &actions d->actions = &data->actions; } else { delete data; + d->va->setFromSourcedValue(0); //clear previous data + d->va->setAnimValue(0, QAbstractAnimation::DeleteWhenStopped); //clear previous data d->actions = 0; } } diff --git a/tests/auto/declarative/qdeclarativeanimations/data/nonTransitionBug.qml b/tests/auto/declarative/qdeclarativeanimations/data/nonTransitionBug.qml new file mode 100644 index 0000000..e9dc36e --- /dev/null +++ b/tests/auto/declarative/qdeclarativeanimations/data/nonTransitionBug.qml @@ -0,0 +1,30 @@ +import Qt 4.7 + +Rectangle { + id: root + width: 200 + height: 200 + + Rectangle { + id: mover + objectName: "mover" + } + + states: [ + State { + name: "free" + }, + State { + name: "left" + PropertyChanges { + restoreEntryValues: false + target: mover + x: 0 + } + } + ] + + transitions: Transition { + PropertyAnimation { properties: "x"; duration: 50 } + } +} diff --git a/tests/auto/declarative/qdeclarativeanimations/tst_qdeclarativeanimations.cpp b/tests/auto/declarative/qdeclarativeanimations/tst_qdeclarativeanimations.cpp index ec867fe..e5943fb 100644 --- a/tests/auto/declarative/qdeclarativeanimations/tst_qdeclarativeanimations.cpp +++ b/tests/auto/declarative/qdeclarativeanimations/tst_qdeclarativeanimations.cpp @@ -48,6 +48,8 @@ #include #include +#include "../../../shared/util.h" + #ifdef Q_OS_SYMBIAN // In Symbian OS test data is located in applications private dir #define SRCDIR "." @@ -82,6 +84,7 @@ private slots: void easingProperties(); void rotation(); void runningTrueBug(); + void nonTransitionBug(); }; #define QTIMED_COMPARE(lhs, rhs) do { \ @@ -762,6 +765,34 @@ void tst_qdeclarativeanimations::runningTrueBug() QVERIFY(cloud->x() > qreal(0)); } +//QTBUG-12805 +void tst_qdeclarativeanimations::nonTransitionBug() +{ + //tests that the animation values from the previous transition are properly cleared + //in the case where an animation in the transition doesn't match anything (but previously did) + QDeclarativeEngine engine; + + QDeclarativeComponent c(&engine, SRCDIR "/data/nonTransitionBug.qml"); + QDeclarativeRectangle *rect = qobject_cast(c.create()); + QVERIFY(rect != 0); + QDeclarativeItemPrivate *rectPrivate = QDeclarativeItemPrivate::get(rect); + QDeclarativeRectangle *mover = rect->findChild("mover"); + + mover->setX(100); + QCOMPARE(mover->x(), qreal(100)); + + rectPrivate->setState("left"); + QTRY_COMPARE(mover->x(), qreal(0)); + + mover->setX(100); + QCOMPARE(mover->x(), qreal(100)); + + //make sure we don't try to animate back to 0 + rectPrivate->setState("free"); + QTest::qWait(300); + QCOMPARE(mover->x(), qreal(100)); +} + QTEST_MAIN(tst_qdeclarativeanimations) #include "tst_qdeclarativeanimations.moc" -- cgit v0.12 From ade18bab3a2c4c877baa9be2a0012d670dafb64a Mon Sep 17 00:00:00 2001 From: Joona Petrell Date: Fri, 13 Aug 2010 17:09:27 +1000 Subject: Add autotest that checks that copy and cut don't work when echomode is set to hide text/password mode Task-number: QTBUG-12086 Reviewed-by: Michael Brasser --- .../tst_qdeclarativetextinput.cpp | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) diff --git a/tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp b/tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp index 6e15a4a..ca9009d 100644 --- a/tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp +++ b/tests/auto/declarative/qdeclarativetextinput/tst_qdeclarativetextinput.cpp @@ -741,6 +741,30 @@ void tst_qdeclarativetextinput::copyAndPaste() { textInput->paste(); QCOMPARE(textInput->text(), QString("Hello world!Hello world!")); QCOMPARE(textInput->text().length(), 24); + + // clear copy buffer + QClipboard *clipboard = QApplication::clipboard(); + QVERIFY(clipboard); + clipboard->clear(); + + // test that copy functionality is disabled + // when echo mode is set to hide text/password mode + int index = 0; + while (index < 4) { + QDeclarativeTextInput::EchoMode echoMode = QDeclarativeTextInput::EchoMode(index); + textInput->setEchoMode(echoMode); + textInput->setText("My password"); + textInput->select(0, textInput->text().length());; + textInput->copy(); + if (echoMode == QDeclarativeTextInput::Normal) { + QVERIFY(!clipboard->text().isEmpty()); + QCOMPARE(clipboard->text(), QString("My password")); + clipboard->clear(); + } else { + QVERIFY(clipboard->text().isEmpty()); + } + index++; + } #endif } -- cgit v0.12 From 7c413e92841c7a6010c4ba5748f6f54448f8643e Mon Sep 17 00:00:00 2001 From: Jukka Rissanen Date: Wed, 28 Jul 2010 15:13:49 +0300 Subject: Do not change the session configuration state because of changes in QNetworkConfigurationManager. The session state is only changed according to status messages sent by icd. Fixes: NB#182148 - QNetworkSession changes to disconnected state immediately after opening session --- src/plugins/bearer/icd/qnetworksession_impl.cpp | 2 -- 1 file changed, 2 deletions(-) diff --git a/src/plugins/bearer/icd/qnetworksession_impl.cpp b/src/plugins/bearer/icd/qnetworksession_impl.cpp index 2583b28..0b35349 100644 --- a/src/plugins/bearer/icd/qnetworksession_impl.cpp +++ b/src/plugins/bearer/icd/qnetworksession_impl.cpp @@ -339,8 +339,6 @@ void QNetworkSessionPrivateImpl::syncStateWithInterface() isOpen = false; opened = false; - connect(&manager, SIGNAL(updateCompleted()), this, SLOT(networkConfigurationsChanged())); - connect(engine, SIGNAL(iapStateChanged(const QString&, uint)), this, SLOT(iapStateChanged(const QString&, uint))); -- cgit v0.12 From d4c8461db653e498b9369c2a36de5b699bcbf87d Mon Sep 17 00:00:00 2001 From: Aaron McCarthy Date: Thu, 12 Aug 2010 14:46:46 +1000 Subject: Release lock before calling into icd engine. --- src/plugins/bearer/icd/qnetworksession_impl.cpp | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/src/plugins/bearer/icd/qnetworksession_impl.cpp b/src/plugins/bearer/icd/qnetworksession_impl.cpp index 0b35349..3170bf6 100644 --- a/src/plugins/bearer/icd/qnetworksession_impl.cpp +++ b/src/plugins/bearer/icd/qnetworksession_impl.cpp @@ -458,14 +458,15 @@ void QNetworkSessionPrivateImpl::syncStateWithInterface() else ptr->name = ptr->id; + const QString identifier = ptr->id; + + configLocker.unlock(); + // Add the new active configuration to manager or update the old config - if (!engine->hasIdentifier(ptr->id)) { - configLocker.unlock(); + if (!engine->hasIdentifier(identifier)) engine->addSessionConfiguration(ptr); - } else { - configLocker.unlock(); + else engine->changedSessionConfiguration(ptr); - } } break; -- cgit v0.12 From b8505789fdf977fcdec91f94557fe13bcef1e7cc Mon Sep 17 00:00:00 2001 From: Tomasz Bursztyka Date: Thu, 29 Jul 2010 15:22:33 +0300 Subject: The QNetworkConfigurationManager did not get the online status correctly even when there was an active connection. Fixes: NB#181984 - QNetworkConfigurationManager reports offline even when connected. Signed-off-by: Tomasz Bursztyka Signed-off-by: Jukka Rissanen --- src/plugins/bearer/icd/qicdengine.cpp | 97 +++++++++++++++++++++++++---------- src/plugins/bearer/icd/qicdengine.h | 2 +- 2 files changed, 71 insertions(+), 28 deletions(-) diff --git a/src/plugins/bearer/icd/qicdengine.cpp b/src/plugins/bearer/icd/qicdengine.cpp index 0900329..87b31da 100644 --- a/src/plugins/bearer/icd/qicdengine.cpp +++ b/src/plugins/bearer/icd/qicdengine.cpp @@ -275,6 +275,8 @@ void QIcdEngine::initialize() userChoiceConfigurations.insert(cpPriv->id, ptr); doRequestUpdate(); + + getIcdInitialState(); } static inline QString network_attrs_to_security(uint network_attrs) @@ -623,7 +625,11 @@ void QIcdEngine::doRequestUpdate(QList scanned) changed = true; } - if (ptr->state != QNetworkConfiguration::Discovered) { + /* If this config is the current active one, we do not set it + * to discovered. + */ + if ((ptr->state != QNetworkConfiguration::Discovered) && + (ptr->state != QNetworkConfiguration::Active)) { ptr->state = QNetworkConfiguration::Discovered; changed = true; } @@ -786,10 +792,50 @@ void QIcdEngine::startListeningStateSignalsForAllConnections() ICD_DBUS_API_INTERFACE, ICD_DBUS_API_STATE_SIG, this, SLOT(connectionStateSignalsSlot(QDBusMessage))); +} + +void QIcdEngine::getIcdInitialState() +{ + /* Instead of requesting ICD status asynchronously, we ask it synchronously. + * It ensures that we always get right icd status BEFORE initialize() ends. + * If not, initialize() might end before we got icd status and + * QNetworkConfigurationManager::updateConfigurations() + * call from user might also end before receiving icd status. + * In such case, we come up to a bug: + * QNetworkConfigurationManagerPrivate::isOnline() will be false even + * if we are connected. + */ + Maemo::Icd icd; + QList state_results; + QMutexLocker locker(&mutex); + QNetworkConfigurationPrivatePointer ptr; + + if (icd.state(state_results) && !state_results.isEmpty()) { + + if (!(state_results.first().params.network_attrs == 0 && + state_results.first().params.network_id.isEmpty())) { + + switch (state_results.first().state) { + case ICD_STATE_CONNECTED: + m_onlineIapId = state_results.first().params.network_id; + + ptr = accessPointConfigurations.value(m_onlineIapId); + if (ptr) { + ptr->state = QNetworkConfiguration::Active; + + QMutexLocker configLocker(&ptr->mutex); + configLocker.unlock(); - // Calling ICD_DBUS_API_STATE_REQ makes sure that initial state will be updated immediately - m_gettingInitialConnectionState = true; - m_dbusInterface->call(ICD_DBUS_API_STATE_REQ); + locker.unlock(); + emit configurationChanged(ptr); + locker.relock(); + } + break; + default: + break; + } + } + } } void QIcdEngine::connectionStateSignalsSlot(QDBusMessage msg) @@ -814,12 +860,12 @@ void QIcdEngine::connectionStateSignalsSlot(QDBusMessage msg) ptr->type = QNetworkConfiguration::InternetAccessPoint; if (ptr->state != QNetworkConfiguration::Active) { ptr->state = QNetworkConfiguration::Active; - if (!m_gettingInitialConnectionState) { - configLocker.unlock(); - locker.unlock(); - emit configurationChanged(ptr); - locker.relock(); - } + + configLocker.unlock(); + locker.unlock(); + emit configurationChanged(ptr); + locker.relock(); + m_onlineIapId = iapid; } } else { @@ -840,22 +886,21 @@ void QIcdEngine::connectionStateSignalsSlot(QDBusMessage msg) ptr->type = QNetworkConfiguration::InternetAccessPoint; if (ptr->state == QNetworkConfiguration::Active) { ptr->state = QNetworkConfiguration::Discovered; - if (!m_gettingInitialConnectionState) { - configLocker.unlock(); - locker.unlock(); - emit configurationChanged(ptr); - locker.relock(); - // Note: If ICD switches used IAP from one to another: - // 1) new IAP is reported to be online first - // 2) old IAP is reported to be offline then - // => Device can be reported to be offline only - // if last known online IAP is reported to be disconnected - if (iapid == m_onlineIapId) { - // It's known that there is only one global ICD connection - // => Because ICD state was reported to be DISCONNECTED, Device is offline - m_onlineIapId.clear(); - } + configLocker.unlock(); + locker.unlock(); + emit configurationChanged(ptr); + locker.relock(); + + // Note: If ICD switches used IAP from one to another: + // 1) new IAP is reported to be online first + // 2) old IAP is reported to be offline then + // => Device can be reported to be offline only + // if last known online IAP is reported to be disconnected + if (iapid == m_onlineIapId) { + // It's known that there is only one global ICD connection + // => Because ICD state was reported to be DISCONNECTED, Device is offline + m_onlineIapId.clear(); } } } else { @@ -876,8 +921,6 @@ void QIcdEngine::connectionStateSignalsSlot(QDBusMessage msg) locker.unlock(); emit iapStateChanged(iapid, icd_connection_state); locker.relock(); - - m_gettingInitialConnectionState = false; } void QIcdEngine::requestUpdate() diff --git a/src/plugins/bearer/icd/qicdengine.h b/src/plugins/bearer/icd/qicdengine.h index a768d84..0d5ba27 100644 --- a/src/plugins/bearer/icd/qicdengine.h +++ b/src/plugins/bearer/icd/qicdengine.h @@ -152,6 +152,7 @@ private: void startListeningStateSignalsForAllConnections(); void doRequestUpdate(QList scanned = QList()); void cancelAsyncConfigurationUpdate(); + void getIcdInitialState(); private: IapMonitor *iapMonitor; @@ -162,7 +163,6 @@ private: QList m_scanResult; bool firstUpdate; - bool m_gettingInitialConnectionState; bool m_scanGoingOn; }; -- cgit v0.12 From dbdbac99ef4ae5243a5f2571b66d4949dbfdc88c Mon Sep 17 00:00:00 2001 From: Aaron McCarthy Date: Mon, 16 Aug 2010 11:14:24 +1000 Subject: Fixed a typo when doing a lock. Conflicts: src/plugins/bearer/icd/qicdengine.cpp --- src/plugins/bearer/icd/qicdengine.cpp | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/src/plugins/bearer/icd/qicdengine.cpp b/src/plugins/bearer/icd/qicdengine.cpp index 87b31da..cae2b7c 100644 --- a/src/plugins/bearer/icd/qicdengine.cpp +++ b/src/plugins/bearer/icd/qicdengine.cpp @@ -821,9 +821,8 @@ void QIcdEngine::getIcdInitialState() ptr = accessPointConfigurations.value(m_onlineIapId); if (ptr) { - ptr->state = QNetworkConfiguration::Active; - QMutexLocker configLocker(&ptr->mutex); + ptr->state = QNetworkConfiguration::Active; configLocker.unlock(); locker.unlock(); -- cgit v0.12 From 6f911718ba51b84ea34b45baf7f8b16954c33371 Mon Sep 17 00:00:00 2001 From: Aaron McCarthy Date: Mon, 16 Aug 2010 11:16:41 +1000 Subject: Mutex is already locked when private member function is called. Conflicts: src/plugins/bearer/icd/qicdengine.cpp --- src/plugins/bearer/icd/qicdengine.cpp | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/src/plugins/bearer/icd/qicdengine.cpp b/src/plugins/bearer/icd/qicdengine.cpp index cae2b7c..3264f15 100644 --- a/src/plugins/bearer/icd/qicdengine.cpp +++ b/src/plugins/bearer/icd/qicdengine.cpp @@ -807,7 +807,6 @@ void QIcdEngine::getIcdInitialState() */ Maemo::Icd icd; QList state_results; - QMutexLocker locker(&mutex); QNetworkConfigurationPrivatePointer ptr; if (icd.state(state_results) && !state_results.isEmpty()) { @@ -825,9 +824,9 @@ void QIcdEngine::getIcdInitialState() ptr->state = QNetworkConfiguration::Active; configLocker.unlock(); - locker.unlock(); + mutex.unlock(); emit configurationChanged(ptr); - locker.relock(); + mutex.lock(); } break; default: -- cgit v0.12 From a1deaf3227ed6bfc086f0142a057d76ccf735e76 Mon Sep 17 00:00:00 2001 From: Aaron McCarthy Date: Thu, 12 Aug 2010 15:17:59 +1000 Subject: Register QNetworkConfigurationPrivatePointer metatype. --- src/network/bearer/qnetworkconfigmanager_p.cpp | 1 + 1 file changed, 1 insertion(+) diff --git a/src/network/bearer/qnetworkconfigmanager_p.cpp b/src/network/bearer/qnetworkconfigmanager_p.cpp index c4f7c00..dd174bf 100644 --- a/src/network/bearer/qnetworkconfigmanager_p.cpp +++ b/src/network/bearer/qnetworkconfigmanager_p.cpp @@ -63,6 +63,7 @@ QNetworkConfigurationManagerPrivate::QNetworkConfigurationManagerPrivate() : pollTimer(0), mutex(QMutex::Recursive), forcedPolling(0), firstUpdate(true) { qRegisterMetaType("QNetworkConfiguration"); + qRegisterMetaType("QNetworkConfigurationPrivatePointer"); moveToThread(QCoreApplicationPrivate::mainThread()); updateConfigurations(); -- cgit v0.12 From d379b4b4d284a1fe5f7cd436d103fbede43b9ca3 Mon Sep 17 00:00:00 2001 From: Aaron McCarthy Date: Thu, 12 Aug 2010 14:48:30 +1000 Subject: Remove version 0.41 of libconninet. --- src/3rdparty/libconninet/AUTHORS | 0 src/3rdparty/libconninet/COPYING | 510 ------ src/3rdparty/libconninet/ChangeLog | 0 src/3rdparty/libconninet/INSTALL | 229 --- src/3rdparty/libconninet/Makefile.am | 49 - src/3rdparty/libconninet/NEWS | 0 src/3rdparty/libconninet/README | 0 src/3rdparty/libconninet/autogen.sh | 3 - src/3rdparty/libconninet/config.guess | 1533 ------------------ src/3rdparty/libconninet/config.sub | 1693 -------------------- src/3rdparty/libconninet/configure.ac | 90 -- src/3rdparty/libconninet/conninet.pc.in | 11 - src/3rdparty/libconninet/debian/changelog | 285 ---- src/3rdparty/libconninet/debian/compat | 1 - src/3rdparty/libconninet/debian/control | 39 - src/3rdparty/libconninet/debian/copyright | 19 - .../libconninet/debian/libconninet0-dev.dirs | 2 - .../libconninet/debian/libconninet0-dev.files | 4 - src/3rdparty/libconninet/debian/libconninet0.dirs | 1 - src/3rdparty/libconninet/debian/libconninet0.files | 1 - src/3rdparty/libconninet/debian/rules | 123 -- src/3rdparty/libconninet/doxygen.cfg.in | 1147 ------------- src/3rdparty/libconninet/src/Makefile.am | 36 - src/3rdparty/libconninet/src/dbusdispatcher.cpp | 611 ------- src/3rdparty/libconninet/src/dbusdispatcher.h | 91 -- src/3rdparty/libconninet/src/iapconf.cpp | 299 ---- src/3rdparty/libconninet/src/iapconf.h | 84 - src/3rdparty/libconninet/src/iapmonitor.cpp | 110 -- src/3rdparty/libconninet/src/iapmonitor.h | 48 - src/3rdparty/libconninet/src/maemo_icd.cpp | 1277 --------------- src/3rdparty/libconninet/src/maemo_icd.h | 182 --- src/3rdparty/libconninet/src/proxyconf.cpp | 315 ---- src/3rdparty/libconninet/src/proxyconf.h | 53 - src/3rdparty/libconninet/tests/Makefile.am | 39 - .../libconninet/tests/ut_dbusdispatcher.cpp | 191 --- src/3rdparty/libconninet/tests/ut_iapconf.cpp | 186 --- src/3rdparty/libconninet/tests/ut_iapmonitor.cpp | 118 -- src/3rdparty/libconninet/tests/ut_maemo_icd.cpp | 274 ---- src/3rdparty/libconninet/tests/ut_proxyconf.cpp | 400 ----- 39 files changed, 10054 deletions(-) delete mode 100644 src/3rdparty/libconninet/AUTHORS delete mode 100644 src/3rdparty/libconninet/COPYING delete mode 100644 src/3rdparty/libconninet/ChangeLog delete mode 100644 src/3rdparty/libconninet/INSTALL delete mode 100644 src/3rdparty/libconninet/Makefile.am delete mode 100644 src/3rdparty/libconninet/NEWS delete mode 100644 src/3rdparty/libconninet/README delete mode 100755 src/3rdparty/libconninet/autogen.sh delete mode 100755 src/3rdparty/libconninet/config.guess delete mode 100755 src/3rdparty/libconninet/config.sub delete mode 100644 src/3rdparty/libconninet/configure.ac delete mode 100644 src/3rdparty/libconninet/conninet.pc.in delete mode 100644 src/3rdparty/libconninet/debian/changelog delete mode 100644 src/3rdparty/libconninet/debian/compat delete mode 100644 src/3rdparty/libconninet/debian/control delete mode 100644 src/3rdparty/libconninet/debian/copyright delete mode 100644 src/3rdparty/libconninet/debian/libconninet0-dev.dirs delete mode 100644 src/3rdparty/libconninet/debian/libconninet0-dev.files delete mode 100644 src/3rdparty/libconninet/debian/libconninet0.dirs delete mode 100644 src/3rdparty/libconninet/debian/libconninet0.files delete mode 100755 src/3rdparty/libconninet/debian/rules delete mode 100644 src/3rdparty/libconninet/doxygen.cfg.in delete mode 100644 src/3rdparty/libconninet/src/Makefile.am delete mode 100644 src/3rdparty/libconninet/src/dbusdispatcher.cpp delete mode 100644 src/3rdparty/libconninet/src/dbusdispatcher.h delete mode 100644 src/3rdparty/libconninet/src/iapconf.cpp delete mode 100644 src/3rdparty/libconninet/src/iapconf.h delete mode 100644 src/3rdparty/libconninet/src/iapmonitor.cpp delete mode 100644 src/3rdparty/libconninet/src/iapmonitor.h delete mode 100644 src/3rdparty/libconninet/src/maemo_icd.cpp delete mode 100644 src/3rdparty/libconninet/src/maemo_icd.h delete mode 100644 src/3rdparty/libconninet/src/proxyconf.cpp delete mode 100644 src/3rdparty/libconninet/src/proxyconf.h delete mode 100644 src/3rdparty/libconninet/tests/Makefile.am delete mode 100644 src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp delete mode 100644 src/3rdparty/libconninet/tests/ut_iapconf.cpp delete mode 100644 src/3rdparty/libconninet/tests/ut_iapmonitor.cpp delete mode 100644 src/3rdparty/libconninet/tests/ut_maemo_icd.cpp delete mode 100644 src/3rdparty/libconninet/tests/ut_proxyconf.cpp diff --git a/src/3rdparty/libconninet/AUTHORS b/src/3rdparty/libconninet/AUTHORS deleted file mode 100644 index e69de29..0000000 diff --git a/src/3rdparty/libconninet/COPYING b/src/3rdparty/libconninet/COPYING deleted file mode 100644 index b124cf5..0000000 --- a/src/3rdparty/libconninet/COPYING +++ /dev/null @@ -1,510 +0,0 @@ - - GNU LESSER GENERAL PUBLIC LICENSE - Version 2.1, February 1999 - - Copyright (C) 1991, 1999 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - -[This is the first released version of the Lesser GPL. It also counts - as the successor of the GNU Library Public License, version 2, hence - the version number 2.1.] - - Preamble - - The licenses for most software are designed to take away your -freedom to share and change it. By contrast, the GNU General Public -Licenses are intended to guarantee your freedom to share and change -free software--to make sure the software is free for all its users. - - This license, the Lesser General Public License, applies to some -specially designated software packages--typically libraries--of the -Free Software Foundation and other authors who decide to use it. You -can use it too, but we suggest you first think carefully about whether -this license or the ordinary General Public License is the better -strategy to use in any particular case, based on the explanations -below. - - When we speak of free software, we are referring to freedom of use, -not price. Our General Public Licenses are designed to make sure that -you have the freedom to distribute copies of free software (and charge -for this service if you wish); that you receive source code or can get -it if you want it; that you can change the software and use pieces of -it in new free programs; and that you are informed that you can do -these things. - - To protect your rights, we need to make restrictions that forbid -distributors to deny you these rights or to ask you to surrender these -rights. These restrictions translate to certain responsibilities for -you if you distribute copies of the library or if you modify it. - - For example, if you distribute copies of the library, whether gratis -or for a fee, you must give the recipients all the rights that we gave -you. You must make sure that they, too, receive or can get the source -code. If you link other code with the library, you must provide -complete object files to the recipients, so that they can relink them -with the library after making changes to the library and recompiling -it. And you must show them these terms so they know their rights. - - We protect your rights with a two-step method: (1) we copyright the -library, and (2) we offer you this license, which gives you legal -permission to copy, distribute and/or modify the library. - - To protect each distributor, we want to make it very clear that -there is no warranty for the free library. Also, if the library is -modified by someone else and passed on, the recipients should know -that what they have is not the original version, so that the original -author's reputation will not be affected by problems that might be -introduced by others. - - Finally, software patents pose a constant threat to the existence of -any free program. We wish to make sure that a company cannot -effectively restrict the users of a free program by obtaining a -restrictive license from a patent holder. Therefore, we insist that -any patent license obtained for a version of the library must be -consistent with the full freedom of use specified in this license. - - Most GNU software, including some libraries, is covered by the -ordinary GNU General Public License. This license, the GNU Lesser -General Public License, applies to certain designated libraries, and -is quite different from the ordinary General Public License. We use -this license for certain libraries in order to permit linking those -libraries into non-free programs. - - When a program is linked with a library, whether statically or using -a shared library, the combination of the two is legally speaking a -combined work, a derivative of the original library. The ordinary -General Public License therefore permits such linking only if the -entire combination fits its criteria of freedom. The Lesser General -Public License permits more lax criteria for linking other code with -the library. - - We call this license the "Lesser" General Public License because it -does Less to protect the user's freedom than the ordinary General -Public License. It also provides other free software developers Less -of an advantage over competing non-free programs. These disadvantages -are the reason we use the ordinary General Public License for many -libraries. However, the Lesser license provides advantages in certain -special circumstances. - - For example, on rare occasions, there may be a special need to -encourage the widest possible use of a certain library, so that it -becomes a de-facto standard. To achieve this, non-free programs must -be allowed to use the library. A more frequent case is that a free -library does the same job as widely used non-free libraries. In this -case, there is little to gain by limiting the free library to free -software only, so we use the Lesser General Public License. - - In other cases, permission to use a particular library in non-free -programs enables a greater number of people to use a large body of -free software. For example, permission to use the GNU C Library in -non-free programs enables many more people to use the whole GNU -operating system, as well as its variant, the GNU/Linux operating -system. - - Although the Lesser General Public License is Less protective of the -users' freedom, it does ensure that the user of a program that is -linked with the Library has the freedom and the wherewithal to run -that program using a modified version of the Library. - - The precise terms and conditions for copying, distribution and -modification follow. Pay close attention to the difference between a -"work based on the library" and a "work that uses the library". The -former contains code derived from the library, whereas the latter must -be combined with the library in order to run. - - GNU LESSER GENERAL PUBLIC LICENSE - TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION - - 0. This License Agreement applies to any software library or other -program which contains a notice placed by the copyright holder or -other authorized party saying it may be distributed under the terms of -this Lesser General Public License (also called "this License"). -Each licensee is addressed as "you". - - A "library" means a collection of software functions and/or data -prepared so as to be conveniently linked with application programs -(which use some of those functions and data) to form executables. - - The "Library", below, refers to any such software library or work -which has been distributed under these terms. A "work based on the -Library" means either the Library or any derivative work under -copyright law: that is to say, a work containing the Library or a -portion of it, either verbatim or with modifications and/or translated -straightforwardly into another language. (Hereinafter, translation is -included without limitation in the term "modification".) - - "Source code" for a work means the preferred form of the work for -making modifications to it. For a library, complete source code means -all the source code for all modules it contains, plus any associated -interface definition files, plus the scripts used to control -compilation and installation of the library. - - Activities other than copying, distribution and modification are not -covered by this License; they are outside its scope. The act of -running a program using the Library is not restricted, and output from -such a program is covered only if its contents constitute a work based -on the Library (independent of the use of the Library in a tool for -writing it). Whether that is true depends on what the Library does -and what the program that uses the Library does. - - 1. You may copy and distribute verbatim copies of the Library's -complete source code as you receive it, in any medium, provided that -you conspicuously and appropriately publish on each copy an -appropriate copyright notice and disclaimer of warranty; keep intact -all the notices that refer to this License and to the absence of any -warranty; and distribute a copy of this License along with the -Library. - - You may charge a fee for the physical act of transferring a copy, -and you may at your option offer warranty protection in exchange for a -fee. - - 2. You may modify your copy or copies of the Library or any portion -of it, thus forming a work based on the Library, and copy and -distribute such modifications or work under the terms of Section 1 -above, provided that you also meet all of these conditions: - - a) The modified work must itself be a software library. - - b) You must cause the files modified to carry prominent notices - stating that you changed the files and the date of any change. - - c) You must cause the whole of the work to be licensed at no - charge to all third parties under the terms of this License. - - d) If a facility in the modified Library refers to a function or a - table of data to be supplied by an application program that uses - the facility, other than as an argument passed when the facility - is invoked, then you must make a good faith effort to ensure that, - in the event an application does not supply such function or - table, the facility still operates, and performs whatever part of - its purpose remains meaningful. - - (For example, a function in a library to compute square roots has - a purpose that is entirely well-defined independent of the - application. Therefore, Subsection 2d requires that any - application-supplied function or table used by this function must - be optional: if the application does not supply it, the square - root function must still compute square roots.) - -These requirements apply to the modified work as a whole. If -identifiable sections of that work are not derived from the Library, -and can be reasonably considered independent and separate works in -themselves, then this License, and its terms, do not apply to those -sections when you distribute them as separate works. But when you -distribute the same sections as part of a whole which is a work based -on the Library, the distribution of the whole must be on the terms of -this License, whose permissions for other licensees extend to the -entire whole, and thus to each and every part regardless of who wrote -it. - -Thus, it is not the intent of this section to claim rights or contest -your rights to work written entirely by you; rather, the intent is to -exercise the right to control the distribution of derivative or -collective works based on the Library. - -In addition, mere aggregation of another work not based on the Library -with the Library (or with a work based on the Library) on a volume of -a storage or distribution medium does not bring the other work under -the scope of this License. - - 3. You may opt to apply the terms of the ordinary GNU General Public -License instead of this License to a given copy of the Library. To do -this, you must alter all the notices that refer to this License, so -that they refer to the ordinary GNU General Public License, version 2, -instead of to this License. (If a newer version than version 2 of the -ordinary GNU General Public License has appeared, then you can specify -that version instead if you wish.) Do not make any other change in -these notices. - - Once this change is made in a given copy, it is irreversible for -that copy, so the ordinary GNU General Public License applies to all -subsequent copies and derivative works made from that copy. - - This option is useful when you wish to copy part of the code of -the Library into a program that is not a library. - - 4. You may copy and distribute the Library (or a portion or -derivative of it, under Section 2) in object code or executable form -under the terms of Sections 1 and 2 above provided that you accompany -it with the complete corresponding machine-readable source code, which -must be distributed under the terms of Sections 1 and 2 above on a -medium customarily used for software interchange. - - If distribution of object code is made by offering access to copy -from a designated place, then offering equivalent access to copy the -source code from the same place satisfies the requirement to -distribute the source code, even though third parties are not -compelled to copy the source along with the object code. - - 5. A program that contains no derivative of any portion of the -Library, but is designed to work with the Library by being compiled or -linked with it, is called a "work that uses the Library". Such a -work, in isolation, is not a derivative work of the Library, and -therefore falls outside the scope of this License. - - However, linking a "work that uses the Library" with the Library -creates an executable that is a derivative of the Library (because it -contains portions of the Library), rather than a "work that uses the -library". The executable is therefore covered by this License. -Section 6 states terms for distribution of such executables. - - When a "work that uses the Library" uses material from a header file -that is part of the Library, the object code for the work may be a -derivative work of the Library even though the source code is not. -Whether this is true is especially significant if the work can be -linked without the Library, or if the work is itself a library. The -threshold for this to be true is not precisely defined by law. - - If such an object file uses only numerical parameters, data -structure layouts and accessors, and small macros and small inline -functions (ten lines or less in length), then the use of the object -file is unrestricted, regardless of whether it is legally a derivative -work. (Executables containing this object code plus portions of the -Library will still fall under Section 6.) - - Otherwise, if the work is a derivative of the Library, you may -distribute the object code for the work under the terms of Section 6. -Any executables containing that work also fall under Section 6, -whether or not they are linked directly with the Library itself. - - 6. As an exception to the Sections above, you may also combine or -link a "work that uses the Library" with the Library to produce a -work containing portions of the Library, and distribute that work -under terms of your choice, provided that the terms permit -modification of the work for the customer's own use and reverse -engineering for debugging such modifications. - - You must give prominent notice with each copy of the work that the -Library is used in it and that the Library and its use are covered by -this License. You must supply a copy of this License. If the work -during execution displays copyright notices, you must include the -copyright notice for the Library among them, as well as a reference -directing the user to the copy of this License. Also, you must do one -of these things: - - a) Accompany the work with the complete corresponding - machine-readable source code for the Library including whatever - changes were used in the work (which must be distributed under - Sections 1 and 2 above); and, if the work is an executable linked - with the Library, with the complete machine-readable "work that - uses the Library", as object code and/or source code, so that the - user can modify the Library and then relink to produce a modified - executable containing the modified Library. (It is understood - that the user who changes the contents of definitions files in the - Library will not necessarily be able to recompile the application - to use the modified definitions.) - - b) Use a suitable shared library mechanism for linking with the - Library. A suitable mechanism is one that (1) uses at run time a - copy of the library already present on the user's computer system, - rather than copying library functions into the executable, and (2) - will operate properly with a modified version of the library, if - the user installs one, as long as the modified version is - interface-compatible with the version that the work was made with. - - c) Accompany the work with a written offer, valid for at least - three years, to give the same user the materials specified in - Subsection 6a, above, for a charge no more than the cost of - performing this distribution. - - d) If distribution of the work is made by offering access to copy - from a designated place, offer equivalent access to copy the above - specified materials from the same place. - - e) Verify that the user has already received a copy of these - materials or that you have already sent this user a copy. - - For an executable, the required form of the "work that uses the -Library" must include any data and utility programs needed for -reproducing the executable from it. However, as a special exception, -the materials to be distributed need not include anything that is -normally distributed (in either source or binary form) with the major -components (compiler, kernel, and so on) of the operating system on -which the executable runs, unless that component itself accompanies -the executable. - - It may happen that this requirement contradicts the license -restrictions of other proprietary libraries that do not normally -accompany the operating system. Such a contradiction means you cannot -use both them and the Library together in an executable that you -distribute. - - 7. You may place library facilities that are a work based on the -Library side-by-side in a single library together with other library -facilities not covered by this License, and distribute such a combined -library, provided that the separate distribution of the work based on -the Library and of the other library facilities is otherwise -permitted, and provided that you do these two things: - - a) Accompany the combined library with a copy of the same work - based on the Library, uncombined with any other library - facilities. This must be distributed under the terms of the - Sections above. - - b) Give prominent notice with the combined library of the fact - that part of it is a work based on the Library, and explaining - where to find the accompanying uncombined form of the same work. - - 8. You may not copy, modify, sublicense, link with, or distribute -the Library except as expressly provided under this License. Any -attempt otherwise to copy, modify, sublicense, link with, or -distribute the Library is void, and will automatically terminate your -rights under this License. However, parties who have received copies, -or rights, from you under this License will not have their licenses -terminated so long as such parties remain in full compliance. - - 9. You are not required to accept this License, since you have not -signed it. However, nothing else grants you permission to modify or -distribute the Library or its derivative works. These actions are -prohibited by law if you do not accept this License. Therefore, by -modifying or distributing the Library (or any work based on the -Library), you indicate your acceptance of this License to do so, and -all its terms and conditions for copying, distributing or modifying -the Library or works based on it. - - 10. Each time you redistribute the Library (or any work based on the -Library), the recipient automatically receives a license from the -original licensor to copy, distribute, link with or modify the Library -subject to these terms and conditions. You may not impose any further -restrictions on the recipients' exercise of the rights granted herein. -You are not responsible for enforcing compliance by third parties with -this License. - - 11. If, as a consequence of a court judgment or allegation of patent -infringement or for any other reason (not limited to patent issues), -conditions are imposed on you (whether by court order, agreement or -otherwise) that contradict the conditions of this License, they do not -excuse you from the conditions of this License. If you cannot -distribute so as to satisfy simultaneously your obligations under this -License and any other pertinent obligations, then as a consequence you -may not distribute the Library at all. For example, if a patent -license would not permit royalty-free redistribution of the Library by -all those who receive copies directly or indirectly through you, then -the only way you could satisfy both it and this License would be to -refrain entirely from distribution of the Library. - -If any portion of this section is held invalid or unenforceable under -any particular circumstance, the balance of the section is intended to -apply, and the section as a whole is intended to apply in other -circumstances. - -It is not the purpose of this section to induce you to infringe any -patents or other property right claims or to contest validity of any -such claims; this section has the sole purpose of protecting the -integrity of the free software distribution system which is -implemented by public license practices. Many people have made -generous contributions to the wide range of software distributed -through that system in reliance on consistent application of that -system; it is up to the author/donor to decide if he or she is willing -to distribute software through any other system and a licensee cannot -impose that choice. - -This section is intended to make thoroughly clear what is believed to -be a consequence of the rest of this License. - - 12. If the distribution and/or use of the Library is restricted in -certain countries either by patents or by copyrighted interfaces, the -original copyright holder who places the Library under this License -may add an explicit geographical distribution limitation excluding those -countries, so that distribution is permitted only in or among -countries not thus excluded. In such case, this License incorporates -the limitation as if written in the body of this License. - - 13. The Free Software Foundation may publish revised and/or new -versions of the Lesser General Public License from time to time. -Such new versions will be similar in spirit to the present version, -but may differ in detail to address new problems or concerns. - -Each version is given a distinguishing version number. If the Library -specifies a version number of this License which applies to it and -"any later version", you have the option of following the terms and -conditions either of that version or of any later version published by -the Free Software Foundation. If the Library does not specify a -license version number, you may choose any version ever published by -the Free Software Foundation. - - 14. If you wish to incorporate parts of the Library into other free -programs whose distribution conditions are incompatible with these, -write to the author to ask for permission. For software which is -copyrighted by the Free Software Foundation, write to the Free -Software Foundation; we sometimes make exceptions for this. Our -decision will be guided by the two goals of preserving the free status -of all derivatives of our free software and of promoting the sharing -and reuse of software generally. - - NO WARRANTY - - 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO -WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. -EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR -OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY -KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE -IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR -PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE -LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME -THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. - - 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN -WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY -AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU -FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR -CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE -LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING -RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A -FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF -SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH -DAMAGES. - - END OF TERMS AND CONDITIONS - - How to Apply These Terms to Your New Libraries - - If you develop a new library, and you want it to be of the greatest -possible use to the public, we recommend making it free software that -everyone can redistribute and change. You can do so by permitting -redistribution under these terms (or, alternatively, under the terms -of the ordinary General Public License). - - To apply these terms, attach the following notices to the library. -It is safest to attach them to the start of each source file to most -effectively convey the exclusion of warranty; and each file should -have at least the "copyright" line and a pointer to where the full -notice is found. - - - - Copyright (C) - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public - License as published by the Free Software Foundation; either - version 2.1 of the License, or (at your option) any later version. - - This library is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - -Also add information on how to contact you by electronic and paper mail. - -You should also get your employer (if you work as a programmer) or -your school, if any, to sign a "copyright disclaimer" for the library, -if necessary. Here is a sample; alter the names: - - Yoyodyne, Inc., hereby disclaims all copyright interest in the - library `Frob' (a library for tweaking knobs) written by James - Random Hacker. - - , 1 April 1990 - Ty Coon, President of Vice - -That's all there is to it! - - diff --git a/src/3rdparty/libconninet/ChangeLog b/src/3rdparty/libconninet/ChangeLog deleted file mode 100644 index e69de29..0000000 diff --git a/src/3rdparty/libconninet/INSTALL b/src/3rdparty/libconninet/INSTALL deleted file mode 100644 index 54caf7c..0000000 --- a/src/3rdparty/libconninet/INSTALL +++ /dev/null @@ -1,229 +0,0 @@ -Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software -Foundation, Inc. - - This file is free documentation; the Free Software Foundation gives -unlimited permission to copy, distribute and modify it. - -Basic Installation -================== - - These are generic installation instructions. - - The `configure' shell script attempts to guess correct values for -various system-dependent variables used during compilation. It uses -those values to create a `Makefile' in each directory of the package. -It may also create one or more `.h' files containing system-dependent -definitions. Finally, it creates a shell script `config.status' that -you can run in the future to recreate the current configuration, and a -file `config.log' containing compiler output (useful mainly for -debugging `configure'). - - It can also use an optional file (typically called `config.cache' -and enabled with `--cache-file=config.cache' or simply `-C') that saves -the results of its tests to speed up reconfiguring. (Caching is -disabled by default to prevent problems with accidental use of stale -cache files.) - - If you need to do unusual things to compile the package, please try -to figure out how `configure' could check whether to do them, and mail -diffs or instructions to the address given in the `README' so they can -be considered for the next release. If you are using the cache, and at -some point `config.cache' contains results you don't want to keep, you -may remove or edit it. - - The file `configure.ac' (or `configure.in') is used to create -`configure' by a program called `autoconf'. You only need -`configure.ac' if you want to change it or regenerate `configure' using -a newer version of `autoconf'. - -The simplest way to compile this package is: - - 1. `cd' to the directory containing the package's source code and type - `./configure' to configure the package for your system. If you're - using `csh' on an old version of System V, you might need to type - `sh ./configure' instead to prevent `csh' from trying to execute - `configure' itself. - - Running `configure' takes awhile. While running, it prints some - messages telling which features it is checking for. - - 2. Type `make' to compile the package. - - 3. Optionally, type `make check' to run any self-tests that come with - the package. - - 4. Type `make install' to install the programs and any data files and - documentation. - - 5. You can remove the program binaries and object files from the - source code directory by typing `make clean'. To also remove the - files that `configure' created (so you can compile the package for - a different kind of computer), type `make distclean'. There is - also a `make maintainer-clean' target, but that is intended mainly - for the package's developers. If you use it, you may have to get - all sorts of other programs in order to regenerate files that came - with the distribution. - -Compilers and Options -===================== - - Some systems require unusual options for compilation or linking that -the `configure' script does not know about. Run `./configure --help' -for details on some of the pertinent environment variables. - - You can give `configure' initial values for configuration parameters -by setting variables in the command line or in the environment. Here -is an example: - - ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix - - *Note Defining Variables::, for more details. - -Compiling For Multiple Architectures -==================================== - - You can compile the package for more than one kind of computer at the -same time, by placing the object files for each architecture in their -own directory. To do this, you must use a version of `make' that -supports the `VPATH' variable, such as GNU `make'. `cd' to the -directory where you want the object files and executables to go and run -the `configure' script. `configure' automatically checks for the -source code in the directory that `configure' is in and in `..'. - - If you have to use a `make' that does not support the `VPATH' -variable, you have to compile the package for one architecture at a -time in the source code directory. After you have installed the -package for one architecture, use `make distclean' before reconfiguring -for another architecture. - -Installation Names -================== - - By default, `make install' will install the package's files in -`/usr/local/bin', `/usr/local/man', etc. You can specify an -installation prefix other than `/usr/local' by giving `configure' the -option `--prefix=PATH'. - - You can specify separate installation prefixes for -architecture-specific files and architecture-independent files. If you -give `configure' the option `--exec-prefix=PATH', the package will use -PATH as the prefix for installing programs and libraries. -Documentation and other data files will still use the regular prefix. - - In addition, if you use an unusual directory layout you can give -options like `--bindir=PATH' to specify different values for particular -kinds of files. Run `configure --help' for a list of the directories -you can set and what kinds of files go in them. - - If the package supports it, you can cause programs to be installed -with an extra prefix or suffix on their names by giving `configure' the -option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. - -Optional Features -================= - - Some packages pay attention to `--enable-FEATURE' options to -`configure', where FEATURE indicates an optional part of the package. -They may also pay attention to `--with-PACKAGE' options, where PACKAGE -is something like `gnu-as' or `x' (for the X Window System). The -`README' should mention any `--enable-' and `--with-' options that the -package recognizes. - - For packages that use the X Window System, `configure' can usually -find the X include and library files automatically, but if it doesn't, -you can use the `configure' options `--x-includes=DIR' and -`--x-libraries=DIR' to specify their locations. - -Specifying the System Type -========================== - - There may be some features `configure' cannot figure out -automatically, but needs to determine by the type of machine the package -will run on. Usually, assuming the package is built to be run on the -_same_ architectures, `configure' can figure that out, but if it prints -a message saying it cannot guess the machine type, give it the -`--build=TYPE' option. TYPE can either be a short name for the system -type, such as `sun4', or a canonical name which has the form: - - CPU-COMPANY-SYSTEM - -where SYSTEM can have one of these forms: - - OS KERNEL-OS - - See the file `config.sub' for the possible values of each field. If -`config.sub' isn't included in this package, then this package doesn't -need to know the machine type. - - If you are _building_ compiler tools for cross-compiling, you should -use the `--target=TYPE' option to select the type of system they will -produce code for. - - If you want to _use_ a cross compiler, that generates code for a -platform different from the build platform, you should specify the -"host" platform (i.e., that on which the generated programs will -eventually be run) with `--host=TYPE'. - -Sharing Defaults -================ - - If you want to set default values for `configure' scripts to share, -you can create a site shell script called `config.site' that gives -default values for variables like `CC', `cache_file', and `prefix'. -`configure' looks for `PREFIX/share/config.site' if it exists, then -`PREFIX/etc/config.site' if it exists. Or, you can set the -`CONFIG_SITE' environment variable to the location of the site script. -A warning: not all `configure' scripts look for a site script. - -Defining Variables -================== - - Variables not defined in a site shell script can be set in the -environment passed to `configure'. However, some packages may run -configure again during the build, and the customized values of these -variables may be lost. In order to avoid this problem, you should set -them in the `configure' command line, using `VAR=value'. For example: - - ./configure CC=/usr/local2/bin/gcc - -will cause the specified gcc to be used as the C compiler (unless it is -overridden in the site shell script). - -`configure' Invocation -====================== - - `configure' recognizes the following options to control how it -operates. - -`--help' -`-h' - Print a summary of the options to `configure', and exit. - -`--version' -`-V' - Print the version of Autoconf used to generate the `configure' - script, and exit. - -`--cache-file=FILE' - Enable the cache: use and save the results of the tests in FILE, - traditionally `config.cache'. FILE defaults to `/dev/null' to - disable caching. - -`--config-cache' -`-C' - Alias for `--cache-file=config.cache'. - -`--quiet' -`--silent' -`-q' - Do not print messages saying which checks are being made. To - suppress all normal output, redirect it to `/dev/null' (any error - messages will still be shown). - -`--srcdir=DIR' - Look for the package's source code in directory DIR. Usually - `configure' can determine that directory automatically. - -`configure' also accepts some other, not widely useful, options. Run -`configure --help' for more details. - diff --git a/src/3rdparty/libconninet/Makefile.am b/src/3rdparty/libconninet/Makefile.am deleted file mode 100644 index 250637a..0000000 --- a/src/3rdparty/libconninet/Makefile.am +++ /dev/null @@ -1,49 +0,0 @@ -SUBDIRS = src tests - -pkgconfigdir = $(libdir)/pkgconfig -pkgconfig_DATA = conninet.pc - -MAINTAINERCLEANFILES = \ - Makefile.in config.h.in configure \ - install-sh ltmain.sh missing mkinstalldirs \ - config.log config.status config.guess config.sub \ - build-stamp compile depcomp acinclude.m4 aclocal.m4 \ - debian/files \ - debian/libconninet0.postinst.debhelper \ - debian/libconninet0.postrm.debhelper \ - debian/libconninet0.substvars - -EXTRA_DIST = \ - debian/changelog \ - debian/compat \ - debian/control \ - debian/copyright \ - debian/libconninet0-dev.dirs \ - debian/libconninet0-dev.files \ - debian/libconninet0.dirs \ - debian/libconninet0.files \ - debian/rules - -# get rid of debian build dirs -maintainer-clean-local: - -rm -rf debian/build debian/tmp \ - debian/libconninet0 \ - debian/libconninet0-dev \ - debian/libconninet0-dbg - -if DOXYGEN_DOCS_ENABLED - DOXYGEN_LINE = $(DOXYGEN) doxygen.cfg -else - DOXYGEN_LINE = -endif - -.PHONY : doc - -doc: - $(DOXYGEN_LINE) - -deb: dist - -mkdir $(top_builddir)/debian-build - cd $(top_builddir)/debian-build && tar zxf ../$(top_builddir)/$(PACKAGE)-$(VERSION).tar.gz - cd $(top_builddir)/debian-build/$(PACKAGE)-$(VERSION) && dpkg-buildpackage -rfakeroot -sa -D - -rm -rf $(top_builddir)/debian-build/$(PACKAGE)-$(VERSION) diff --git a/src/3rdparty/libconninet/NEWS b/src/3rdparty/libconninet/NEWS deleted file mode 100644 index e69de29..0000000 diff --git a/src/3rdparty/libconninet/README b/src/3rdparty/libconninet/README deleted file mode 100644 index e69de29..0000000 diff --git a/src/3rdparty/libconninet/autogen.sh b/src/3rdparty/libconninet/autogen.sh deleted file mode 100755 index a8fd885..0000000 --- a/src/3rdparty/libconninet/autogen.sh +++ /dev/null @@ -1,3 +0,0 @@ -#!/bin/sh - -autoreconf --verbose --install --force diff --git a/src/3rdparty/libconninet/config.guess b/src/3rdparty/libconninet/config.guess deleted file mode 100755 index e3a2116..0000000 --- a/src/3rdparty/libconninet/config.guess +++ /dev/null @@ -1,1533 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 -# Free Software Foundation, Inc. - -timestamp='2009-06-10' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner . -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ELF__ - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - s390x:SunOS:*:*) - echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) - eval $set_cc_for_build - SUN_ARCH="i386" - # If there is a compiler, see if it is configured for 64-bit objects. - # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. - # This test works for both compilers. - if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then - if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ - (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ - grep IS_64BIT_ARCH >/dev/null - then - SUN_ARCH="x86_64" - fi - fi - echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[456]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include - #include - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep -q __LP64__ - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd | genuineintel) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - IA64) - echo ia64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - 8664:Windows_NT:*) - echo x86_64-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - eval $set_cc_for_build - if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep -q __ARM_EABI__ - then - echo ${UNAME_MACHINE}-unknown-linux-gnu - else - echo ${UNAME_MACHINE}-unknown-linux-gnueabi - fi - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:* | mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef ${UNAME_MACHINE} - #undef ${UNAME_MACHINE}el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=${UNAME_MACHINE}el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=${UNAME_MACHINE} - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep -q ld.so.1 - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - padre:Linux:*:*) - echo sparc-unknown-linux-gnu - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i586. - # Note: whatever this is, it MUST be the same as what config.sub - # prints for the "djgpp" host, or else GDB configury will decide that - # this is a cross-build. - echo i586-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - NCR*:*:4.2:* | MPRAS*:*:4.2:*) - OS_REL='.3' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes . - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From seanf@swdc.stratus.com. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From Paul.Green@stratus.com. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From Paul.Green@stratus.com. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - BePC:Haiku:*:*) # Haiku running on Intel PC compatible. - echo i586-pc-haiku - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; - i*86:AROS:*:*) - echo ${UNAME_MACHINE}-pc-aros - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c < -# include -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 < in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/src/3rdparty/libconninet/config.sub b/src/3rdparty/libconninet/config.sub deleted file mode 100755 index eb0389a..0000000 --- a/src/3rdparty/libconninet/config.sub +++ /dev/null @@ -1,1693 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 -# Free Software Foundation, Inc. - -timestamp='2009-06-11' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to . Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to ." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, -2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ - uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ - kopensolaris*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -bluegene*) - os=-cnk - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | lm32 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep | metag \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64octeon | mips64octeonel \ - | mips64orion | mips64orionel \ - | mips64r5900 | mips64r5900el \ - | mips64vr | mips64vrel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | moxie \ - | mt \ - | msp430 \ - | nios | nios2 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | score \ - | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k | z80) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | lm32-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64octeon-* | mips64octeonel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64r5900-* | mips64r5900el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa*-* \ - | ymp-* \ - | z8k-* | z80-*) - ;; - # Recognize the basic CPU types without company name, with glob match. - xtensa*) - basic_machine=$basic_machine-unknown - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aros) - basic_machine=i386-pc - os=-aros - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - blackfin) - basic_machine=bfin-unknown - os=-linux - ;; - blackfin-*) - basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - bluegene*) - basic_machine=powerpc-ibm - os=-cnk - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - cegcc) - basic_machine=arm-unknown - os=-cegcc - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16) - basic_machine=cr16-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - dicos) - basic_machine=i686-pc - os=-dicos - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m68knommu) - basic_machine=m68k-unknown - os=-linux - ;; - m68knommu-*) - basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - parisc) - basic_machine=hppa-unknown - os=-linux - ;; - parisc-*) - basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` - os=-linux - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tile*) - basic_machine=tile-unknown - os=-linux-gnu - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - z80-*-coff) - basic_machine=z80-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -kopensolaris* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* | -aros* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* | -cegcc* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -dicos*) - os=-dicos - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -cnk*|-aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/src/3rdparty/libconninet/configure.ac b/src/3rdparty/libconninet/configure.ac deleted file mode 100644 index 2a383ee..0000000 --- a/src/3rdparty/libconninet/configure.ac +++ /dev/null @@ -1,90 +0,0 @@ -AC_INIT([libconninet], patsubst(esyscmd([dpkg-parsechangelog | sed -n '/^Version: \(.*\)$/ {s//\1/;p}']), [ -]), [jukka.rissanen@nokia.com]) -AM_INIT_AUTOMAKE([foreign]) - -AC_PROG_CXX -AC_PROG_LIBTOOL - -AC_ARG_ENABLE(docs, [ --enable-docs Build DOXYGEN documentation (requires Doxygen)],enable_docs=$enableval,enable_docs=auto) - -AC_PATH_PROG(DOXYGEN, doxygen, no) -AC_MSG_CHECKING([whether to build Doxygen documentation]) - -if test x$DOXYGEN = xno ; then - have_doxygen=no -else - have_doxygen=yes -fi -if test x$enable_docs = xauto ; then - if test x$have_doxygen = xno ; then - enable_docs=no - else - enable_docs=yes - fi -fi -if test x$enable_docs = xyes; then - if test x$have_doxygen = xno; then - AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found]) - else - AC_MSG_RESULT(yes) - fi -else - AC_MSG_RESULT(no) -fi - -AM_CONDITIONAL(DOXYGEN_DOCS_ENABLED, test x$enable_docs = xyes) -AC_SUBST(DOXYGEN) - -PKG_CHECK_MODULES(GLIB, glib-2.0) -AC_SUBST(GLIB_CFLAGS) -AC_SUBST(GLIB_LIBS) - -PKG_CHECK_MODULES(QTCORE, QtCore) -AC_SUBST(QTCORE_CFLAGS) -AC_SUBST(QTCORE_LIBS) - -PKG_CHECK_MODULES(QTNETWORK, QtNetwork) -AC_SUBST(QTNETWORK_CFLAGS) -AC_SUBST(QTNETWORK_LIBS) - -PKG_CHECK_MODULES(QTDBUS, QtDBus) -AC_SUBST(QTDBUS_CFLAGS) -AC_SUBST(QTDBUS_LIBS) - -PKG_CHECK_MODULES(QTTEST, QtTest) -AC_SUBST(QTTEST_CFLAGS) -AC_SUBST(QTTEST_LIBS) - -PKG_CHECK_MODULES(DBUS, dbus-glib-1) -AC_SUBST(DBUS_CFLAGS) -AC_SUBST(DBUS_LIBS) - -PKG_CHECK_MODULES(CONNSETTINGS, connsettings) -AC_SUBST(CONNSETTINGS_CFLAGS) -AC_SUBST(CONNSETTINGS_LIBS) - -PKG_CHECK_MODULES(OSSO_IC, osso-ic) -AC_SUBST(OSSO_IC_CFLAGS) -AC_SUBST(OSSO_IC_LIBS) - -PKG_CHECK_MODULES(ICD_DEV, icd2) -AC_SUBST(ICD_DEV_CFLAGS) -AC_SUBST(ICD_DEV_LIBS) - -PKG_CHECK_MODULES(GCONF, gconf-2.0) -AC_SUBST(GCONF_CFLAGS) -AC_SUBST(GCONF_LIBS) - -PKG_CHECK_MODULES(QGCONF, gq-gconf) -AC_SUBST(QGCONF_CFLAGS) -AC_SUBST(QGCONF_LIBS) - -CONCFLAGS="-Wall -Werror -Wmissing-prototypes" -AC_SUBST(CONCFLAGS) - -AC_CONFIG_FILES([Makefile \ - src/Makefile \ - tests/Makefile \ - conninet.pc \ - doxygen.cfg]) -AC_OUTPUT diff --git a/src/3rdparty/libconninet/conninet.pc.in b/src/3rdparty/libconninet/conninet.pc.in deleted file mode 100644 index 68cdee0..0000000 --- a/src/3rdparty/libconninet/conninet.pc.in +++ /dev/null @@ -1,11 +0,0 @@ -prefix=@prefix@ -exec_prefix=@exec_prefix@ -libdir=@libdir@ -includedir=@includedir@ - -Name: libconninet -Description: Internet Connectivity support library -Version: @VERSION@ -Requires: dbus-1 >= 0.60 glib-2.0 QtCore QtDBus QtGui -Libs: -lconninet -Cflags: -I${includedir}/conninet diff --git a/src/3rdparty/libconninet/debian/changelog b/src/3rdparty/libconninet/debian/changelog deleted file mode 100644 index 436d318..0000000 --- a/src/3rdparty/libconninet/debian/changelog +++ /dev/null @@ -1,285 +0,0 @@ -libconninet (0.41+0m6) unstable; urgency=low - - * This entry has been added by BIFH queue processor - version has been changed to 0.41+0m6 - - -- Qing Jin Thu, 15 Jul 2010 15:56:38 +0300 - -libconninet (0.41) unstable; urgency=low - - * Fixes: NB#175098 - Qt4.7 Webkit crashes when bearer API QNetworkSession - constructor calls QNetworkSession::syncStateWithInterface() which in turn - calls Maemo::state() and Maemo::addrinfo() and webkit expects that event - loop is not run but those function process main loop events. - Now Maemo::state() and Maemo::addrinfo() are changed to be synchronous - and fully blocking functions. The old non-blocking versions are called - Maemo::state_non_blocking() and Maemo::addrinfo_non_blocking(). - - -- Jukka Rissanen Wed, 14 Jul 2010 10:12:47 +0300 - -libconninet (0.40) unstable; urgency=low - - * Fixes: NB#167465 - Unable to open network connection using libbearer - - -- Jukka Rissanen Tue, 11 May 2010 10:47:10 +0300 - -libconninet (0.39) unstable; urgency=low - - * Fixes: NB#167982 - initialize DBus vtable in DBusDispatcher. - - -- Aapo Makela Mon, 10 May 2010 14:42:39 +0300 - -libconninet (0.38) unstable; urgency=low - - * Changing icd2 connect_req to be synchronous as the check for - returned connect signal did not work correctly, this caused a - long timeout when connect() was called. - * Scan sometimes missed results and did not return them to caller. - * HTTP proxy settings were not set correctly. - - -- Jukka Rissanen Thu, 15 Apr 2010 11:25:06 +0300 - -libconninet (0.37) unstable; urgency=low - - * Make proxy config reference counting atomic. - - -- Jukka Rissanen Wed, 3 Mar 2010 13:23:08 +0200 - -libconninet (0.36) unstable; urgency=low - - * Fixes: NB#157586 - Cleanup dbus listener when WLAN scanning object is - deleted. - - -- Jukka Rissanen Fri, 26 Feb 2010 13:30:41 +0200 - -libconninet (0.35) unstable; urgency=low - - * Fixes: NB#156883 - libconninet fails to build under the Platform SDK (SB2) - - -- Jukka Rissanen Thu, 18 Feb 2010 12:14:40 +0200 - -libconninet (0.34) unstable; urgency=low - - * Coverity fix - - -- Jukka Rissanen Tue, 16 Feb 2010 16:38:00 +0200 - -libconninet (0.33) unstable; urgency=low - - * Added API to update Qt proxy config. - - -- Jukka Rissanen Tue, 26 Jan 2010 15:48:36 +0200 - -libconninet (0.32) unstable; urgency=low - - * Fixed IAPConf to unset value when set value is invalid. - * Updated IAPMonitor to use libconnsettings. - - -- Aapo Makela Wed, 03 Feb 2010 07:32:45 +0200 - -libconninet (0.31) unstable; urgency=low - - * Fixes: NB#154892 - Check nulls in IAPConf. - - -- Aapo Makela Mon, 01 Feb 2010 09:32:06 +0200 - -libconninet (0.30) unstable; urgency=low - - * Updated IAPConf to use libconnsettings. - - -- Aapo Makela Fri, 29 Jan 2010 12:58:03 +0200 - -libconninet (0.29) unstable; urgency=low - - * Fixed dependencies - - -- Jukka Rissanen Fri, 15 Jan 2010 10:16:07 +0200 - -libconninet (0.28) unstable; urgency=low - - * Get rid of libdui dependency - - -- Jukka Rissanen Wed, 13 Jan 2010 09:56:26 +0200 - -libconninet (0.27) unstable; urgency=low - - * Insert new pending calls to the list in DBusDispatcher. - - -- Aapo Makela Tue, 22 Dec 2009 14:27:32 +0200 - -libconninet (0.26) unstable; urgency=low - - * Added possibility to specify different signal path for DBusDispatcher. - - -- Aapo Makela Wed, 25 Nov 2009 14:27:34 +0200 - -libconninet (0.25) unstable; urgency=low - - * Fixes: NB#146450 - All scan results were not returned to the caller. - - -- Jukka Rissanen Mon, 16 Nov 2009 17:23:15 +0200 - -libconninet (0.24) unstable; urgency=low - - * Wait all scan results for all network types in Maemo::Icd::scan() - - -- Jukka Rissanen Fri, 6 Nov 2009 14:45:23 +0200 - -libconninet (0.23) unstable; urgency=low - - * Fixes: NB#143361 - Assert failure in session class for GPRS IAP. - - -- Jukka Rissanen Mon, 19 Oct 2009 16:00:14 +0300 - -libconninet (0.22) unstable; urgency=low - - * Fixed the error checking if scan returns 0 results. - - -- Jukka Rissanen Wed, 7 Oct 2009 13:50:27 +0300 - -libconninet (0.21) unstable; urgency=low - - * Support multiple DBusDispatcher classes at the same time. This is - required by Maemo::Icd class so that multiple instances of it can - be used the same time. - - -- Jukka Rissanen Mon, 5 Oct 2009 16:33:43 +0300 - -libconninet (0.20) unstable; urgency=low - - * Fixed memory leak in IAPConf::setValue() - - -- Jukka Rissanen Fri, 2 Oct 2009 13:02:21 +0300 - -libconninet (0.19) unstable; urgency=low - - * Fixed connect_req to one specific IAP in Icd class. - - -- Jukka Rissanen Tue, 29 Sep 2009 17:02:46 +0300 - -libconninet (0.18) unstable; urgency=low - - * Make sure the library will not abort in Icd class if scan does - not return any results. - - -- Jukka Rissanen Tue, 22 Sep 2009 17:00:12 +0300 - -libconninet (0.17) unstable; urgency=low - - * Added IAP monitoring support. - - -- Jukka Rissanen Mon, 21 Sep 2009 16:29:31 +0300 - -libconninet (0.16) unstable; urgency=low - - * Disabled the old osso-ic dbus interface as it is currently not used. - * Fixed the addrinfo request, now addresses are returned correctly to - the caller. - - -- Jukka Rissanen Thu, 17 Sep 2009 15:56:13 +0300 - -libconninet (0.15) unstable; urgency=low - - * Enabling state_req, statistics_req and addrinfo_req support - functions in Maemo::Icd as the corresponding DBUS API functions are - fixed in icd2 v0.89 - - -- Jukka Rissanen Fri, 24 Jul 2009 15:23:02 +0300 - -libconninet (0.14) unstable; urgency=low - - * Icd statistics support added. - * Icd address information support added. - * Icd scan method does not return the final (and empty) result any more. - * Added initial unit test implementation for Icd class. - * Some of the status functions in Icd class disabled because of issues - in icd2 and the dbus api. - - -- Jukka Rissanen Thu, 23 Jul 2009 11:03:05 +0300 - -libconninet (0.13) unstable; urgency=low - - * Added API to get all the configured IAPs. - - -- Jukka Rissanen Tue, 21 Jul 2009 09:47:18 +0300 - -libconninet (0.12) unstable; urgency=low - - * Replaced duivaluespace by Dui in pkg-config file because the - duivaluespace is deprecated. - - -- Jukka Rissanen Mon, 20 Jul 2009 16:00:10 +0300 - -libconninet (0.11) unstable; urgency=low - - * Using libdui instead of libduivaluespace because it is deprecated. - * The IAPConf::clear() uses native gconf API instead of launching gconftool - * Check that state_req call returned list and the list contains entries - before trying to access it. - - -- Jukka Rissanen Mon, 20 Jul 2009 14:55:15 +0300 - -libconninet (0.10) unstable; urgency=low - - * connect() did not return ok when connection succeeded. - - -- Jukka Rissanen Thu, 25 Jun 2009 09:31:21 +0300 - -libconninet (0.9) unstable; urgency=low - - * Connection timeout set to 2.5min, same as in fremantle. - - -- Jukka Rissanen Wed, 17 Jun 2009 13:36:40 +0300 - -libconninet (0.8) unstable; urgency=low - - * Fix state_req signal received from Icd - - -- Jukka Rissanen Thu, 11 Jun 2009 17:19:33 +0300 - -libconninet (0.7) unstable; urgency=low - - * Icd disconnect and select reqs are made synchronous as we do not - wait the return status. The previous async version was causing core - dumps if Icd class was destroyed too early. - - -- Jukka Rissanen Thu, 11 Jun 2009 11:52:36 +0300 - -libconninet (0.6) unstable; urgency=low - - * Fixed the libconninet0-dev dependencies. - - -- Jukka Rissanen Mon, 8 Jun 2009 10:47:56 +0300 - -libconninet (0.5) unstable; urgency=low - - * Fixed missing QObject connect functions. - * Fixed IAPConf to return invalid QVariant if the value does not exist. - - -- Jukka Rissanen Mon, 01 Jun 2009 13:58:53 +0300 - -libconninet (0.4) unstable; urgency=low - - * Fixed QObject signal setting for Maemo::Icd - - -- Jukka Rissanen Wed, 20 May 2009 13:51:11 +0300 - -libconninet (0.3) unstable; urgency=low - - * Refactoring classes - * Added IAPConf class. - - -- Jukka Rissanen Thu, 14 May 2009 13:24:11 +0300 - -libconninet (0.2) unstable; urgency=low - - * Fixed pkgconfig file which had wrong dependency - * Added DBus array and struct support to DBusDispatcher. - - -- Jukka Rissanen Wed, 13 May 2009 12:11:00 +0300 - -libconninet (0.1) unstable; urgency=low - - * Initial Release. - - -- Jukka Rissanen Tue, 12 May 2009 16:10:27 +0200 diff --git a/src/3rdparty/libconninet/debian/compat b/src/3rdparty/libconninet/debian/compat deleted file mode 100644 index b8626c4..0000000 --- a/src/3rdparty/libconninet/debian/compat +++ /dev/null @@ -1 +0,0 @@ -4 diff --git a/src/3rdparty/libconninet/debian/control b/src/3rdparty/libconninet/debian/control deleted file mode 100644 index 2db660f..0000000 --- a/src/3rdparty/libconninet/debian/control +++ /dev/null @@ -1,39 +0,0 @@ -Source: libconninet -Priority: optional -Maintainer: Jukka Rissanen -Build-Depends: debhelper (>= 4.0.0), autotools-dev, libglib2.0-dev (>= 2.8), - libdbus-1-dev (>= 0.60), libconnsettings0-dev (>= 0.4), icd2-osso-ic-dev, - icd2-dev, libqt4-dev, libgconf2-dev (>> 2.6.4), libgq-gconf-dev -Standards-Version: 3.6.2 -Section: libs - -Package: libconninet0-dev -Section: libdevel -Architecture: any -Depends: libconninet0 (= ${Source-Version}), libdbus-1-dev (>= 0.60), - libglib2.0-dev (>= 2.8), libconnsettings0-dev (>= 0.4), libqt4-dev, - icd2-osso-ic-dev, icd2-dev, libgconf2-dev (>> 2.6.4), libgq-gconf-dev -Description: Internet Connectivity support library development files - Internet Connectivity support library (libconninet) provides common - support functions for connecting to icd2 and accessing configuration - data. - . - This package contains the header files. - -Package: libconninet0 -Section: libs -Architecture: any -Depends: ${shlibs:Depends}, ${misc:Depends} -Description: Internet Connectivity support library - Internet Connectivity support library (libconninet) provides common - support functions for connecting to icd2 and accessing configuration - data. - . - This package contains the shared libraries. - -Package: libconninet0-dbg -Section: libs -Architecture: any -Depends: libconninet0 (= ${Source-Version}), ${shlibs:Depends}, ${misc:Depends} -Description: Debug symbols for the Internet Connectivity support library - Internet Connectivity support library (libconninet) debug symbols. diff --git a/src/3rdparty/libconninet/debian/copyright b/src/3rdparty/libconninet/debian/copyright deleted file mode 100644 index 97e8e68..0000000 --- a/src/3rdparty/libconninet/debian/copyright +++ /dev/null @@ -1,19 +0,0 @@ -libconninet - Internet Connectivity support library - -Copyright (C) 2009 Nokia Corporation. All rights reserved. - -Contact: Jukka Rissanen - -This library is free software; you can redistribute it and/or modify -it under the terms of the GNU Lesser General Public License version 2.1 -as published by the Free Software Foundation. - -This library is distributed in the hope that it will be useful, but -WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -Lesser General Public License for more details. - -You should have received a copy of the GNU Lesser General Public -License along with this library; if not, write to the Free Software -Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA -02110-1301 USA diff --git a/src/3rdparty/libconninet/debian/libconninet0-dev.dirs b/src/3rdparty/libconninet/debian/libconninet0-dev.dirs deleted file mode 100644 index 4418816..0000000 --- a/src/3rdparty/libconninet/debian/libconninet0-dev.dirs +++ /dev/null @@ -1,2 +0,0 @@ -usr/lib -usr/include diff --git a/src/3rdparty/libconninet/debian/libconninet0-dev.files b/src/3rdparty/libconninet/debian/libconninet0-dev.files deleted file mode 100644 index 78bbac8..0000000 --- a/src/3rdparty/libconninet/debian/libconninet0-dev.files +++ /dev/null @@ -1,4 +0,0 @@ -usr/include/* -usr/lib/lib*.so -usr/lib/pkgconfig/* -usr/share/pkgconfig/* diff --git a/src/3rdparty/libconninet/debian/libconninet0.dirs b/src/3rdparty/libconninet/debian/libconninet0.dirs deleted file mode 100644 index 6845771..0000000 --- a/src/3rdparty/libconninet/debian/libconninet0.dirs +++ /dev/null @@ -1 +0,0 @@ -usr/lib diff --git a/src/3rdparty/libconninet/debian/libconninet0.files b/src/3rdparty/libconninet/debian/libconninet0.files deleted file mode 100644 index d0dbfd1..0000000 --- a/src/3rdparty/libconninet/debian/libconninet0.files +++ /dev/null @@ -1 +0,0 @@ -usr/lib/lib*.so.* diff --git a/src/3rdparty/libconninet/debian/rules b/src/3rdparty/libconninet/debian/rules deleted file mode 100755 index 2a3d395..0000000 --- a/src/3rdparty/libconninet/debian/rules +++ /dev/null @@ -1,123 +0,0 @@ -#!/usr/bin/make -f -# -*- makefile -*- -# Sample debian/rules that uses debhelper. -# This file was originally written by Joey Hess and Craig Small. -# As a special exception, when this file is copied by dh-make into a -# dh-make output file, you may use that output file without restriction. -# This special exception was added by Craig Small in version 0.37 of dh-make. - -# Uncomment this to turn on verbose mode. -#export DH_VERBOSE=1 - - -# These are used for cross-compiling and for saving the configure script -# from having to guess our platform (since we know it already) -DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) -DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) - - -CFLAGS = -Wall -g - -ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) - CFLAGS += -O0 -else - CFLAGS += -O2 -endif - -# shared library versions, option 1 -#version=2.0.5 -#major=2 -# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so -version=`ls src/.libs/lib*.so.* | \ - awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'` -major=`ls src/.libs/lib*.so.* | \ - awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'` - -configure: configure.ac debian/changelog - -./autogen.sh - -config.status: configure - dh_testdir - # Add here commands to configure the package. - CFLAGS="$(CFLAGS)" ./configure \ - --host=$(DEB_HOST_GNU_TYPE) \ - --build=$(DEB_BUILD_GNU_TYPE) \ - --prefix=/usr \ - --mandir=\$${prefix}/share/man \ - --infodir=\$${prefix}/share/info - - -build: build-stamp -build-stamp: config.status - dh_testdir - - # Add here commands to compile the package. - $(MAKE) - - touch build-stamp - -clean: - dh_testdir - dh_testroot - rm -f build-stamp - - # Add here commands to clean up after the build process. - -$(MAKE) distclean -ifneq "$(wildcard /usr/share/misc/config.sub)" "" - cp -f /usr/share/misc/config.sub config.sub -endif -ifneq "$(wildcard /usr/share/misc/config.guess)" "" - cp -f /usr/share/misc/config.guess config.guess -endif - - - dh_clean - -install: build - dh_testdir - dh_testroot - dh_clean -k - dh_installdirs - - # Add here commands to install the package into debian/tmp - $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp - - -# Build architecture-independent files here. -binary-indep: build install -# We have nothing to do by default. - -# Build architecture-dependent files here. -binary-arch: build install - dh_testdir - dh_testroot - dh_movefiles - dh_installchangelogs ChangeLog - dh_installdocs - dh_installexamples -# dh_install -# dh_installmenu -# dh_installdebconf -# dh_installlogrotate -# dh_installemacsen -# dh_installpam -# dh_installmime -# dh_installinit -# dh_installcron -# dh_installinfo - dh_installman - dh_link - dh_strip --dbg-package=libconninet0 - dh_compress - dh_fixperms -# dh_perl -# dh_python - dh_makeshlibs - dh_installdeb - dh_shlibdeps - dh_gencontrol - dh_md5sums - dh_builddeb - -binary: binary-indep binary-arch -.PHONY: build clean binary-indep binary-arch binary install diff --git a/src/3rdparty/libconninet/doxygen.cfg.in b/src/3rdparty/libconninet/doxygen.cfg.in deleted file mode 100644 index 80a4c8d..0000000 --- a/src/3rdparty/libconninet/doxygen.cfg.in +++ /dev/null @@ -1,1147 +0,0 @@ -# Doxyfile 1.3.7 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = "Internet Connectivity Support Library" - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = @VERSION@ - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = doc - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 2 levels of 10 sub-directories under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of source -# files, where putting all generated files in the same directory would otherwise -# cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, -# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en -# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, -# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. - -OUTPUT_LANGUAGE = English - -# This tag can be used to specify the encoding used in the generated output. -# The encoding is not always determined by the language that is chosen, -# but also whether or not the output is meant for Windows or non-Windows users. -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES -# forces the Windows encoding (this is the default for the Windows binary), -# whereas setting the tag to NO uses a Unix-style encoding (the default for -# all platforms other than Windows). - -USE_WINDOWS_ENCODING = NO - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is used -# as the annotated text. Otherwise, the brief description is used as-is. If left -# blank, the following values are used ("$name" is automatically replaced with the -# name of the entity): "The $name class" "The $name widget" "The $name file" -# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited -# members of a class in the documentation of that class as if those members were -# ordinary class members. Constructors, destructors and assignment operators of -# the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = NO - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explicit @brief command for a brief description. - -JAVADOC_AUTOBRIEF = YES - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = YES - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources -# only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = YES - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = NO - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = NO - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = NO - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = NO - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = YES - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = NO - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = conic/conic.h \ - conic/conicconnection.h \ - conic/conicconnectionevent.h \ - conic/conicevent.h \ - conic/coniciap.h \ - conic/conicstatisticsevent.h - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp -# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm - -FILE_PATTERNS = - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = NO - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories -# that are symbolic links (a Unix filesystem feature) are excluded from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. - -EXCLUDE_PATTERNS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command , where -# is the value of the INPUT_FILTER tag, and is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. - -INPUT_FILTER = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = NO - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = YES - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4wide - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse the -# parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or -# super classes. Setting the tag to NO turns the diagrams off. Note that this -# option is superseded by the HAVE_DOT option below. This is only a fallback. It is -# recommended to install and use dot, since it yields more powerful graphs. - -CLASS_DIAGRAMS = YES - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = NO - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. - -CALL_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found on the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_WIDTH = 1024 - -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_HEIGHT = 1024 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes that -# lay further from the root node will be omitted. Note that setting this option to -# 1 or 2 may greatly reduce the computation time needed for large code bases. Also -# note that a graph may be further truncated if the graph's image dimensions are -# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). -# If 0 is used for the depth value (the default), the graph is not depth-constrained. - -MAX_DOT_GRAPH_DEPTH = 0 - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - -SEARCHENGINE = NO diff --git a/src/3rdparty/libconninet/src/Makefile.am b/src/3rdparty/libconninet/src/Makefile.am deleted file mode 100644 index be7a1e5..0000000 --- a/src/3rdparty/libconninet/src/Makefile.am +++ /dev/null @@ -1,36 +0,0 @@ -DEFS = -DDBUS_API_SUBJECT_TO_CHANGE -DGCONF_DISABLE_DEPRECATED -INCLUDES = @GLIB_CFLAGS@ @DBUS_CFLAGS@ @GCONF_CFLAGS@ @OSSO_IC_CFLAGS@ @ICD_DEV_CFLAGS@ @QTCORE_CFLAGS@ @QTNETWORK_CFLAGS@ @QTDBUS_CFLAGS@ @QGCONF_CFLAGS@ @CONNSETTINGS_CFLAGS@ -LIBS = @GLIB_LIBS@ @DBUS_LIBS@ @GCONF_LIBS@ @OSSO_IC_LIBS@ @ICD_DEV_LIBS@ @QTCORE_LIBS@ @QTDBUS_LIBS@ @QTNETWORK_CFLAGS@ @QGCONF_LIBS@ @CONNSETTINGS_LIBS@ - -AM_CFLAGS = $(CONCFLAGS) - -lib_LTLIBRARIES = libconninet.la -libconninet_la_SOURCES = \ - maemo_icd.cpp \ - dbusdispatcher.cpp \ - iapconf.cpp \ - iapmonitor.cpp \ - proxyconf.cpp - -#libconninet_la_LDFLAGS = -version-info 0:0:0 - -conninetincludedir = $(includedir)/conninet -conninetinclude_HEADERS = \ - maemo_icd.h \ - dbusdispatcher.h \ - iapconf.h \ - iapmonitor.h \ - proxyconf.h - -nodist_libconninet_la_SOURCES = \ - moc_maemo_icd.cpp \ - moc_dbusdispatcher.cpp - -MAINTAINERCLEANFILES = Makefile.in - -# This rule lets GNU make create any moc_*.cpp from the equivalent *.h -moc_%.cpp: %.h - moc $< -o $@ - -# This line ensures that generated moc files are deleted when we make clean. -CLEANFILES = *_moc.cpp *.loT diff --git a/src/3rdparty/libconninet/src/dbusdispatcher.cpp b/src/3rdparty/libconninet/src/dbusdispatcher.cpp deleted file mode 100644 index f5b830a..0000000 --- a/src/3rdparty/libconninet/src/dbusdispatcher.cpp +++ /dev/null @@ -1,611 +0,0 @@ -/* * This file is part of conninet * - * - * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). - * All rights reserved. - * - * Contact: Aapo Makela - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * version 2.1 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#include -#include -#include -#include -#include -#include -#include "dbusdispatcher.h" - -namespace Maemo { - -/*! - \class Maemo::DBusDispatcher - - \brief DBusDispatcher is a class, which is able to send DBUS method call - messages and receive unicast signals from DBUS object. -*/ - -class DBusDispatcherPrivate -{ -public: - DBusDispatcherPrivate(const QString& service, - const QString& path, - const QString& interface, - const QString& signalPath) - : service(service), path(path), interface(interface), - signalPath(signalPath), connection(0) - { - memset(&signal_vtable, 0, sizeof(signal_vtable)); - } - - ~DBusDispatcherPrivate() - { - foreach(DBusPendingCall *call, pending_calls) { - dbus_pending_call_cancel(call); - dbus_pending_call_unref(call); - } - } - - QString service; - QString path; - QString interface; - QString signalPath; - struct DBusConnection *connection; - QList pending_calls; - struct DBusObjectPathVTable signal_vtable; -}; - -static bool constantVariantList(const QVariantList& variantList) { - // Special case, empty list == empty struct - if (variantList.isEmpty()) { - return false; - } else { - QVariant::Type type = variantList[0].type(); - // Iterate items in the list and check if they are same type - foreach(QVariant variant, variantList) { - if (variant.type() != type) { - return false; - } - } - } - return true; -} - -static QString variantToSignature(const QVariant& argument, - bool constantList = true) { - switch (argument.type()) { - case QVariant::Bool: - return "b"; - case QVariant::ByteArray: - return "ay"; - case QVariant::Char: - return "y"; - case QVariant::Int: - return "i"; - case QVariant::UInt: - return "u"; - case QVariant::StringList: - return "as"; - case QVariant::String: - return "s"; - case QVariant::LongLong: - return "x"; - case QVariant::ULongLong: - return "t"; - case QVariant::List: - { - QString signature; - QVariantList variantList = argument.toList(); - if (!constantList) { - signature += DBUS_STRUCT_BEGIN_CHAR_AS_STRING; - foreach(QVariant listItem, variantList) { - signature += variantToSignature(listItem); - } - signature += DBUS_STRUCT_END_CHAR_AS_STRING; - } else { - if (variantList.isEmpty()) - return ""; - signature = "a" + variantToSignature(variantList[0]); - } - - return signature; - } - default: - qDebug() << "Unsupported variant type: " << argument.type(); - break; - } - - return ""; -} - -static bool appendVariantToDBusMessage(const QVariant& argument, - DBusMessageIter *dbus_iter) { - int idx = 0; - DBusMessageIter array_iter; - QStringList str_list; - dbus_bool_t bool_data; - dbus_int32_t int32_data; - dbus_uint32_t uint32_data; - dbus_int64_t int64_data; - dbus_uint64_t uint64_data; - char *str_data; - char char_data; - - switch (argument.type()) { - - case QVariant::Bool: - bool_data = argument.toBool(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_BOOLEAN, - &bool_data); - break; - - case QVariant::ByteArray: - str_data = argument.toByteArray().data(); - dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, - DBUS_TYPE_BYTE_AS_STRING, &array_iter); - dbus_message_iter_append_fixed_array(&array_iter, - DBUS_TYPE_BYTE, - &str_data, - argument.toByteArray().size()); - dbus_message_iter_close_container(dbus_iter, &array_iter); - break; - - case QVariant::Char: - char_data = argument.toChar().toAscii(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_BYTE, - &char_data); - break; - - case QVariant::Int: - int32_data = argument.toInt(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_INT32, - &int32_data); - break; - - case QVariant::String: - str_data = argument.toString().toLatin1().data(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_STRING, - &str_data); - break; - - case QVariant::StringList: - str_list = argument.toStringList(); - dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, - "s", &array_iter); - for (idx = 0; idx < str_list.size(); idx++) { - str_data = str_list.at(idx).toLatin1().data(); - dbus_message_iter_append_basic(&array_iter, - DBUS_TYPE_STRING, - &str_data); - } - dbus_message_iter_close_container(dbus_iter, &array_iter); - break; - - case QVariant::UInt: - uint32_data = argument.toUInt(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_UINT32, - &uint32_data); - break; - - case QVariant::ULongLong: - uint64_data = argument.toULongLong(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_UINT64, - &uint64_data); - break; - - case QVariant::LongLong: - int64_data = argument.toLongLong(); - dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_INT64, - &int64_data); - break; - - case QVariant::List: - { - QVariantList variantList = argument.toList(); - bool constantList = constantVariantList(variantList); - DBusMessageIter array_iter; - - // List is mapped either as an DBUS array (all items same type) - // DBUS struct (variable types) depending on constantList - if (constantList) { - // Resolve the signature for the first item - QString signature = ""; - if (!variantList.isEmpty()) { - signature = variantToSignature( - variantList[0], - constantVariantList(variantList[0].toList())); - } - - // Mapped as DBUS array - dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, - signature.toAscii(), - &array_iter); - - foreach(QVariant listItem, variantList) { - appendVariantToDBusMessage(listItem, &array_iter); - } - - dbus_message_iter_close_container(dbus_iter, &array_iter); - } else { - // Mapped as DBUS struct - dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_STRUCT, - NULL, - &array_iter); - - foreach(QVariant listItem, variantList) { - appendVariantToDBusMessage(listItem, &array_iter); - } - - dbus_message_iter_close_container(dbus_iter, &array_iter); - } - - break; - } - default: - qDebug() << "Unsupported variant type: " << argument.type(); - break; - } - - return true; -} - -static QVariant getVariantFromDBusMessage(DBusMessageIter *iter) { - dbus_bool_t bool_data; - dbus_int32_t int32_data; - dbus_uint32_t uint32_data; - dbus_int64_t int64_data; - dbus_uint64_t uint64_data; - char *str_data; - char char_data; - int argtype = dbus_message_iter_get_arg_type(iter); - - switch (argtype) { - - case DBUS_TYPE_BOOLEAN: - { - dbus_message_iter_get_basic(iter, &bool_data); - QVariant variant((bool)bool_data); - return variant; - } - - case DBUS_TYPE_ARRAY: - { - // Handle all arrays here - int elem_type = dbus_message_iter_get_element_type(iter); - DBusMessageIter array_iter; - - dbus_message_iter_recurse(iter, &array_iter); - - if (elem_type == DBUS_TYPE_BYTE) { - QByteArray byte_array; - do { - dbus_message_iter_get_basic(&array_iter, &char_data); - byte_array.append(char_data); - } while (dbus_message_iter_next(&array_iter)); - QVariant variant(byte_array); - return variant; - } else if (elem_type == DBUS_TYPE_STRING) { - QStringList str_list; - do { - dbus_message_iter_get_basic(&array_iter, &str_data); - str_list.append(str_data); - } while (dbus_message_iter_next(&array_iter)); - QVariant variant(str_list); - return variant; - } else { - QVariantList variantList; - do { - variantList << getVariantFromDBusMessage(&array_iter); - } while (dbus_message_iter_next(&array_iter)); - QVariant variant(variantList); - return variant; - } - break; - } - - case DBUS_TYPE_BYTE: - { - dbus_message_iter_get_basic(iter, &char_data); - QChar ch(char_data); - QVariant variant(ch); - return variant; - } - - case DBUS_TYPE_INT32: - { - dbus_message_iter_get_basic(iter, &int32_data); - QVariant variant((int)int32_data); - return variant; - } - - case DBUS_TYPE_UINT32: - { - dbus_message_iter_get_basic(iter, &uint32_data); - QVariant variant((uint)uint32_data); - return variant; - } - - case DBUS_TYPE_STRING: - { - dbus_message_iter_get_basic(iter, &str_data); - QString str(str_data); - QVariant variant(str); - return variant; - } - - case DBUS_TYPE_INT64: - { - dbus_message_iter_get_basic(iter, &int64_data); - QVariant variant((qlonglong)int64_data); - return variant; - } - - case DBUS_TYPE_UINT64: - { - dbus_message_iter_get_basic(iter, &uint64_data); - QVariant variant((qulonglong)uint64_data); - return variant; - } - - case DBUS_TYPE_STRUCT: - { - // Handle all structs here - DBusMessageIter struct_iter; - dbus_message_iter_recurse(iter, &struct_iter); - - QVariantList variantList; - do { - variantList << getVariantFromDBusMessage(&struct_iter); - } while (dbus_message_iter_next(&struct_iter)); - QVariant variant(variantList); - return variant; - } - - default: - qDebug() << "Unsupported DBUS type: " << argtype; - } - - return QVariant(); -} - -static DBusHandlerResult signalHandler (DBusConnection *connection, - DBusMessage *message, - void *object_ref) { - (void)connection; - QString interface; - QString signal; - DBusDispatcher *dispatcher = (DBusDispatcher *)object_ref; - - if (dbus_message_get_type(message) == DBUS_MESSAGE_TYPE_SIGNAL) { - interface = dbus_message_get_interface(message); - signal = dbus_message_get_member(message); - - QList arglist; - DBusMessageIter dbus_iter; - - if (dbus_message_iter_init(message, &dbus_iter)) { - // Read return arguments - while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { - arglist << getVariantFromDBusMessage(&dbus_iter); - dbus_message_iter_next(&dbus_iter); - } - } - - dispatcher->emitSignalReceived(interface, signal, arglist); - return DBUS_HANDLER_RESULT_HANDLED; - } - (void)message; - return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; -} - -DBusDispatcher::DBusDispatcher(const QString& service, - const QString& path, - const QString& interface, - QObject *parent) - : QObject(parent), - d_ptr(new DBusDispatcherPrivate(service, path, interface, path)) { - setupDBus(); -} - -DBusDispatcher::DBusDispatcher(const QString& service, - const QString& path, - const QString& interface, - const QString& signalPath, - QObject *parent) - : QObject(parent), - d_ptr(new DBusDispatcherPrivate(service, path, interface, signalPath)) { - setupDBus(); -} - -DBusDispatcher::~DBusDispatcher() -{ - if (d_ptr->connection) { - dbus_connection_close(d_ptr->connection); - dbus_connection_unref(d_ptr->connection); - } - delete d_ptr; -} - -void DBusDispatcher::setupDBus() -{ - d_ptr->connection = dbus_bus_get_private(DBUS_BUS_SYSTEM, NULL); - - if (d_ptr->connection == NULL) - qDebug() << "Unable to get DBUS connection!"; - else { - d_ptr->signal_vtable.message_function = signalHandler; - - dbus_connection_set_exit_on_disconnect(d_ptr->connection, FALSE); - dbus_connection_setup_with_g_main(d_ptr->connection, NULL); - dbus_connection_register_object_path(d_ptr->connection, - d_ptr->signalPath.toLatin1(), - &d_ptr->signal_vtable, - this); - } -} - -static DBusMessage *prepareDBusCall(const QString& service, - const QString& path, - const QString& interface, - const QString& method, - const QVariant& arg1 = QVariant(), - const QVariant& arg2 = QVariant(), - const QVariant& arg3 = QVariant(), - const QVariant& arg4 = QVariant(), - const QVariant& arg5 = QVariant(), - const QVariant& arg6 = QVariant(), - const QVariant& arg7 = QVariant(), - const QVariant& arg8 = QVariant()) -{ - DBusMessage *message = dbus_message_new_method_call(service.toLatin1(), - path.toLatin1(), - interface.toLatin1(), - method.toLatin1()); - DBusMessageIter dbus_iter; - - // Append variants to DBUS message - QList arglist; - if (arg1.isValid()) arglist << arg1; - if (arg2.isValid()) arglist << arg2; - if (arg3.isValid()) arglist << arg3; - if (arg4.isValid()) arglist << arg4; - if (arg5.isValid()) arglist << arg5; - if (arg6.isValid()) arglist << arg6; - if (arg7.isValid()) arglist << arg7; - if (arg8.isValid()) arglist << arg8; - - dbus_message_iter_init_append (message, &dbus_iter); - - while (!arglist.isEmpty()) { - QVariant argument = arglist.takeFirst(); - appendVariantToDBusMessage(argument, &dbus_iter); - } - - return message; -} - -QList DBusDispatcher::call(const QString& method, - const QVariant& arg1, - const QVariant& arg2, - const QVariant& arg3, - const QVariant& arg4, - const QVariant& arg5, - const QVariant& arg6, - const QVariant& arg7, - const QVariant& arg8) { - DBusMessageIter dbus_iter; - DBusMessage *message = prepareDBusCall(d_ptr->service, d_ptr->path, - d_ptr->interface, method, - arg1, arg2, arg3, arg4, arg5, - arg6, arg7, arg8); - DBusMessage *reply = dbus_connection_send_with_reply_and_block( - d_ptr->connection, - message, -1, NULL); - dbus_message_unref(message); - - QList replylist; - if (reply != NULL && dbus_message_iter_init(reply, &dbus_iter)) { - // Read return arguments - while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { - replylist << getVariantFromDBusMessage(&dbus_iter); - dbus_message_iter_next(&dbus_iter); - } - } - if (reply != NULL) dbus_message_unref(reply); - return replylist; -} - -class PendingCallInfo { -public: - QString method; - DBusDispatcher *dispatcher; - DBusDispatcherPrivate *priv; -}; - -static void freePendingCallInfo(void *memory) { - PendingCallInfo *info = (PendingCallInfo *)memory; - delete info; -} - -static void pendingCallFunction (DBusPendingCall *pending, - void *memory) { - PendingCallInfo *info = (PendingCallInfo *)memory; - QString errorStr; - QList replyList; - DBusMessage *reply = dbus_pending_call_steal_reply (pending); - - Q_ASSERT(reply != NULL); - - if (dbus_message_get_type(reply) == DBUS_MESSAGE_TYPE_ERROR) { - errorStr = dbus_message_get_error_name (reply); - } else { - DBusMessageIter dbus_iter; - dbus_message_iter_init(reply, &dbus_iter); - // Read return arguments - while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { - replyList << getVariantFromDBusMessage(&dbus_iter); - dbus_message_iter_next(&dbus_iter); - } - } - - info->priv->pending_calls.removeOne(pending); - info->dispatcher->emitCallReply(info->method, replyList, errorStr); - dbus_message_unref(reply); - dbus_pending_call_unref(pending); -} - -bool DBusDispatcher::callAsynchronous(const QString& method, - const QVariant& arg1, - const QVariant& arg2, - const QVariant& arg3, - const QVariant& arg4, - const QVariant& arg5, - const QVariant& arg6, - const QVariant& arg7, - const QVariant& arg8) { - DBusMessage *message = prepareDBusCall(d_ptr->service, d_ptr->path, - d_ptr->interface, method, - arg1, arg2, arg3, arg4, arg5, - arg6, arg7, arg8); - DBusPendingCall *call = NULL; - dbus_bool_t ret = dbus_connection_send_with_reply(d_ptr->connection, - message, &call, -1); - PendingCallInfo *info = new PendingCallInfo; - info->method = method; - info->dispatcher = this; - info->priv = d_ptr; - - dbus_pending_call_set_notify(call, pendingCallFunction, info, freePendingCallInfo); - d_ptr->pending_calls.append(call); - return (bool)ret; -} - -void DBusDispatcher::emitSignalReceived(const QString& interface, - const QString& signal, - const QList& args) { - emit signalReceived(interface, signal, args); } - -void DBusDispatcher::emitCallReply(const QString& method, - const QList& args, - const QString& error) { - emit callReply(method, args, error); } - -void DBusDispatcher::synchronousDispatch(int timeout_ms) -{ - dbus_connection_read_write_dispatch(d_ptr->connection, timeout_ms); -} - -} // Maemo namespace - diff --git a/src/3rdparty/libconninet/src/dbusdispatcher.h b/src/3rdparty/libconninet/src/dbusdispatcher.h deleted file mode 100644 index 2f71b6f..0000000 --- a/src/3rdparty/libconninet/src/dbusdispatcher.h +++ /dev/null @@ -1,91 +0,0 @@ -/* * This file is part of conn-dui-settings-inet * - * - * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). - * All rights reserved. - * - * Contact: Aapo Makela - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * version 2.1 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - -#ifndef DBUSDISPATCHER_H -#define DBUSDISPATCHER_H - -#include -#include - -namespace Maemo { - -class DBusDispatcherPrivate; -class DBusDispatcher : public QObject -{ - Q_OBJECT - -public: - DBusDispatcher(const QString& service, - const QString& path, - const QString& interface, - QObject *parent = 0); - DBusDispatcher(const QString& service, - const QString& path, - const QString& interface, - const QString& signalPath, - QObject *parent = 0); - ~DBusDispatcher(); - - QList call(const QString& method, - const QVariant& arg1 = QVariant(), - const QVariant& arg2 = QVariant(), - const QVariant& arg3 = QVariant(), - const QVariant& arg4 = QVariant(), - const QVariant& arg5 = QVariant(), - const QVariant& arg6 = QVariant(), - const QVariant& arg7 = QVariant(), - const QVariant& arg8 = QVariant()); - bool callAsynchronous(const QString& method, - const QVariant& arg1 = QVariant(), - const QVariant& arg2 = QVariant(), - const QVariant& arg3 = QVariant(), - const QVariant& arg4 = QVariant(), - const QVariant& arg5 = QVariant(), - const QVariant& arg6 = QVariant(), - const QVariant& arg7 = QVariant(), - const QVariant& arg8 = QVariant()); - void emitSignalReceived(const QString& interface, - const QString& signal, - const QList& args); - void emitCallReply(const QString& method, - const QList& args, - const QString& error = ""); - void synchronousDispatch(int timeout_ms); - -Q_SIGNALS: - void signalReceived(const QString& interface, - const QString& signal, - const QList& args); - void callReply(const QString& method, - const QList& args, - const QString& error); - -protected: - void setupDBus(); - -private: - DBusDispatcherPrivate *d_ptr; -}; - -} // Maemo namespace - -#endif diff --git a/src/3rdparty/libconninet/src/iapconf.cpp b/src/3rdparty/libconninet/src/iapconf.cpp deleted file mode 100644 index 2e77fa5..0000000 --- a/src/3rdparty/libconninet/src/iapconf.cpp +++ /dev/null @@ -1,299 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. - - Contact: Aapo Makela - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#include -#include -#include - -#include "iapconf.h" - -#define QSTRING_TO_CONST_CSTR(str) \ - str.toUtf8().constData() - -namespace Maemo { - -class IAPConfPrivate { -public: - ConnSettings *settings; - - ConnSettingsValue *variantToValue(const QVariant &variant); - QVariant valueToVariant(ConnSettingsValue *value); -}; - -ConnSettingsValue *IAPConfPrivate::variantToValue(const QVariant &variant) -{ - // Convert variant to ConnSettingsValue - ConnSettingsValue *value = conn_settings_value_new(); - if (value == 0) { - qWarning("IAPConf: Unable to create new ConnSettingsValue"); - return 0; - } - - switch(variant.type()) { - - case QVariant::Invalid: - value->type = CONN_SETTINGS_VALUE_INVALID; - break; - - case QVariant::String: { - char *valueStr = strdup(QSTRING_TO_CONST_CSTR(variant.toString())); - value->type = CONN_SETTINGS_VALUE_STRING; - value->value.string_val = valueStr; - break; - } - - case QVariant::Int: - value->type = CONN_SETTINGS_VALUE_INT; - value->value.int_val = variant.toInt(); - break; - - case QMetaType::Float: - case QVariant::Double: - value->type = CONN_SETTINGS_VALUE_DOUBLE; - value->value.double_val = variant.toDouble(); - break; - - case QVariant::Bool: - value->type = CONN_SETTINGS_VALUE_BOOL; - value->value.bool_val = variant.toBool() ? 1 : 0; - break; - - case QVariant::ByteArray: { - QByteArray array = variant.toByteArray(); - value->type = CONN_SETTINGS_VALUE_BYTE_ARRAY; - value->value.byte_array.len = array.size(); - value->value.byte_array.val = (unsigned char *)malloc(array.size()); - memcpy(value->value.byte_array.val, array.constData(), array.size()); - break; - } - - case QVariant::List: { - QVariantList list = variant.toList(); - ConnSettingsValue **list_val = (ConnSettingsValue **)malloc( - (list.size() + 1) * sizeof(ConnSettingsValue *)); - - for (int idx = 0; idx < list.size(); idx++) { - list_val[idx] = variantToValue(list.at(idx)); - } - list_val[list.size()] = 0; - - value->type = CONN_SETTINGS_VALUE_LIST; - value->value.list_val = list_val; - break; - } - - default: - qWarning("IAPConf: Can not handle QVariant of type %d", - variant.type()); - conn_settings_value_destroy(value); - return 0; - } - - return value; -} - -QVariant IAPConfPrivate::valueToVariant(ConnSettingsValue *value) -{ - if (value == 0 || value->type == CONN_SETTINGS_VALUE_INVALID) { - return QVariant(); - } - - switch(value->type) { - - case CONN_SETTINGS_VALUE_BOOL: - return QVariant(value->value.bool_val ? true : false); - - case CONN_SETTINGS_VALUE_STRING: - return QVariant(QString(value->value.string_val)); - - case CONN_SETTINGS_VALUE_DOUBLE: - return QVariant(value->value.double_val); - - case CONN_SETTINGS_VALUE_INT: - return QVariant(value->value.int_val); - - case CONN_SETTINGS_VALUE_LIST: { - // At least with GConf backend connsettings returns byte array as list - // of ints, first check for that case - if (value->value.list_val && value->value.list_val[0]) { - bool canBeConvertedToByteArray = true; - for (int idx = 0; value->value.list_val[idx]; idx++) { - ConnSettingsValue *val = value->value.list_val[idx]; - if (val->type != CONN_SETTINGS_VALUE_INT - || val->value.int_val > 255 - || val->value.int_val < 0) { - canBeConvertedToByteArray = false; - break; - } - } - - if (canBeConvertedToByteArray) { - QByteArray array; - for (int idx = 0; value->value.list_val[idx]; idx++) { - array.append(value->value.list_val[idx]->value.int_val); - } - return array; - } - - // Create normal list - QVariantList list; - for (int idx = 0; value->value.list_val[idx]; idx++) { - list.append(valueToVariant(value->value.list_val[idx])); - } - return list; - } - } - - case CONN_SETTINGS_VALUE_BYTE_ARRAY: - return QByteArray::fromRawData((char *)value->value.byte_array.val, - value->value.byte_array.len); - - default: - return QVariant(); - } -} - -// Public class implementation - -IAPConf::IAPConf(const QString &iap_id) - : d_ptr(new IAPConfPrivate) -{ - d_ptr->settings = conn_settings_open(CONN_SETTINGS_CONNECTION, - QSTRING_TO_CONST_CSTR(iap_id)); - if (d_ptr->settings == 0) { - qWarning("IAPConf: Unable to open ConnSettings for %s", - QSTRING_TO_CONST_CSTR(iap_id)); - } -} - -IAPConf::~IAPConf() -{ - conn_settings_close(d_ptr->settings); - delete d_ptr; -} - -void IAPConf::setValue(const QString& key, const QVariant& value) -{ - // Invalid value means unsetting the given key - if (!value.isValid()) { - int err = conn_settings_unset(d_ptr->settings, - QSTRING_TO_CONST_CSTR(key)); - if (err != CONN_SETTINGS_E_NO_ERROR) { - qWarning("IAPConf: unable to unset key %s: %s", - QSTRING_TO_CONST_CSTR(key), - conn_settings_error_text((ConnSettingsError)err)); - } - return; - } - - // Convert value to ConnSettingsValue - ConnSettingsValue *val = d_ptr->variantToValue(value); - if (val == 0) return; - - // Set value and handle errors - int error = conn_settings_set(d_ptr->settings, - QSTRING_TO_CONST_CSTR(key), - val); - if (error != CONN_SETTINGS_E_NO_ERROR) { - qWarning("IAPConf: error in setting key %s: %s", - QSTRING_TO_CONST_CSTR(key), - conn_settings_error_text((ConnSettingsError)error)); - } - - // Destroy value - conn_settings_value_destroy(val); - return; -} - -void IAPConf::set(const QString& key1, const QVariant& value1, - const QString& key2, const QVariant& value2, - const QString& key3, const QVariant& value3, - const QString& key4, const QVariant& value4, - const QString& key5, const QVariant& value5, - const QString& key6, const QVariant& value6, - const QString& key7, const QVariant& value7, - const QString& key8, const QVariant& value8, - const QString& key9, const QVariant& value9, - const QString& key10, const QVariant& value10) -{ - if (!key1.isEmpty()) setValue(key1, value1); - if (!key2.isEmpty()) setValue(key2, value2); - if (!key3.isEmpty()) setValue(key3, value3); - if (!key4.isEmpty()) setValue(key4, value4); - if (!key5.isEmpty()) setValue(key5, value5); - if (!key6.isEmpty()) setValue(key6, value6); - if (!key7.isEmpty()) setValue(key7, value7); - if (!key8.isEmpty()) setValue(key8, value8); - if (!key9.isEmpty()) setValue(key9, value9); - if (!key10.isEmpty()) setValue(key10, value10); -} - -QVariant IAPConf::value(const QString& key) const -{ - ConnSettingsValue *val = conn_settings_get(d_ptr->settings, - QSTRING_TO_CONST_CSTR(key)); - - QVariant variant = d_ptr->valueToVariant(val); - conn_settings_value_destroy(val); - return variant; -} - -void IAPConf::clear(const char *default_path) -{ - Q_UNUSED(default_path); // default path is unused - - int error = conn_settings_remove(d_ptr->settings); - if (error != CONN_SETTINGS_E_NO_ERROR) { - qWarning("IAPConf: Error when removing IAP: %s", - conn_settings_error_text((ConnSettingsError)error)); - } -} - -void IAPConf::clearAll() -{ - ConnSettings *settings = conn_settings_open(CONN_SETTINGS_CONNECTION, - NULL); - conn_settings_remove(settings); - conn_settings_close(settings); -} - - -void IAPConf::getAll(QList &all_iaps, bool return_path) -{ - Q_UNUSED(return_path); // We don't use return path currently - - // Go through all available connections and add them to the list - char **ids = conn_settings_list_ids(CONN_SETTINGS_CONNECTION); - if (ids == 0) { - // No ids found - nothing to do - return; - } - - for (int idx = 0; ids[idx]; idx++) { - all_iaps.append(QString(ids[idx])); - free(ids[idx]); - } - free(ids); -} - - -} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/iapconf.h b/src/3rdparty/libconninet/src/iapconf.h deleted file mode 100644 index 57c0856..0000000 --- a/src/3rdparty/libconninet/src/iapconf.h +++ /dev/null @@ -1,84 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009 Nokia Corporation. All rights reserved. - - Contact: Aapo Makela - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#ifndef IAPCONF_H -#define IAPCONF_H - -#include -#include - -namespace Maemo { - -class IAPConfPrivate; -class IAPConf { -public: - IAPConf(const QString &iap_id); - virtual ~IAPConf(); - - /** - Convenience method for setting multiple IAP values with one call. - */ - void set(const QString& key1, const QVariant& value1, - const QString& key2 = "", const QVariant& value2 = QVariant(), - const QString& key3 = "", const QVariant& value3 = QVariant(), - const QString& key4 = "", const QVariant& value4 = QVariant(), - const QString& key5 = "", const QVariant& value5 = QVariant(), - const QString& key6 = "", const QVariant& value6 = QVariant(), - const QString& key7 = "", const QVariant& value7 = QVariant(), - const QString& key8 = "", const QVariant& value8 = QVariant(), - const QString& key9 = "", const QVariant& value9 = QVariant(), - const QString& key10 = "", const QVariant& value10 = QVariant()); - - /** - Set one IAP value. - */ - void setValue(const QString& key, const QVariant& value); - - /** - Get one IAP value. - */ - QVariant value(const QString& key) const; - - /** - Clear this IAP from GConf - */ - void clear(const char *default_path=0); - - /** - Clear all IAP specific information from GConf (including all IAPs). - DO NOT USE THIS FUNCTION IN ANYWHERE ELSE EXCEPT IN TEST CODE! - */ - void clearAll(); - - /** - Return all the IAPs found in the system. If return_path is true, - then do not strip the IAP path away. - */ - static void getAll(QList &all_iaps, bool return_path=false); - -private: - IAPConfPrivate *d_ptr; -}; - -} // namespace Maemo - -#endif diff --git a/src/3rdparty/libconninet/src/iapmonitor.cpp b/src/3rdparty/libconninet/src/iapmonitor.cpp deleted file mode 100644 index c44cbc8..0000000 --- a/src/3rdparty/libconninet/src/iapmonitor.cpp +++ /dev/null @@ -1,110 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#include - -#include -#include "iapmonitor.h" - -namespace Maemo { - - -void conn_settings_notify_func (ConnSettingsType type, - const char *id, - const char *key, - ConnSettingsValue *value, - void *user_data); - -class IAPMonitorPrivate { -private: - IAPMonitor *monitor; - ConnSettings *settings; - -public: - - IAPMonitorPrivate(IAPMonitor *monitor) - : monitor(monitor) - { - settings = conn_settings_open(CONN_SETTINGS_CONNECTION, NULL); - conn_settings_add_notify( - settings, - (ConnSettingsNotifyFunc *)conn_settings_notify_func, - this); - } - - ~IAPMonitorPrivate() - { - conn_settings_del_notify(settings); - conn_settings_close(settings); - } - - void iapAdded(const QString &iap) - { - monitor->iapAdded(iap); - } - - void iapRemoved(const QString &iap) - { - monitor->iapRemoved(iap); - } -}; - -void conn_settings_notify_func (ConnSettingsType type, - const char *id, - const char *key, - ConnSettingsValue *value, - void *user_data) -{ - if (type != CONN_SETTINGS_CONNECTION) return; - IAPMonitorPrivate *priv = (IAPMonitorPrivate *)user_data; - - QString iapId(key); - iapId = iapId.split("/")[0]; - if (value != 0) { - priv->iapAdded(iapId); - } else if (iapId == QString(key)) { - // IAP is removed only when the directory gets removed - priv->iapRemoved(iapId); - } -} - -IAPMonitor::IAPMonitor() - : d_ptr(new IAPMonitorPrivate(this)) -{ -} - -IAPMonitor::~IAPMonitor() -{ - delete d_ptr; -} - -void IAPMonitor::iapAdded(const QString &id) -{ - // By default do nothing -} - -void IAPMonitor::iapRemoved(const QString &id) -{ - // By default do nothing -} - -} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/iapmonitor.h b/src/3rdparty/libconninet/src/iapmonitor.h deleted file mode 100644 index 558f23e..0000000 --- a/src/3rdparty/libconninet/src/iapmonitor.h +++ /dev/null @@ -1,48 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#ifndef IAPMONITOR_H -#define IAPMONITOR_H - -#include - -namespace Maemo { - -class IAPMonitorPrivate; -class IAPMonitor { -public: - IAPMonitor(); - ~IAPMonitor(); - -protected: - virtual void iapAdded(const QString &id); - virtual void iapRemoved(const QString &id); - -private: - IAPMonitorPrivate *d_ptr; - Q_DECLARE_PRIVATE(IAPMonitor); -}; - -} // namespace Maemo - -#endif // IAPMONITOR_H - diff --git a/src/3rdparty/libconninet/src/maemo_icd.cpp b/src/3rdparty/libconninet/src/maemo_icd.cpp deleted file mode 100644 index bc84fbc..0000000 --- a/src/3rdparty/libconninet/src/maemo_icd.cpp +++ /dev/null @@ -1,1277 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#include -#include "maemo_icd.h" -#include -#include -#include -#include -#include -#include -#include - - -namespace Maemo { - -/* Reference counting singleton class that creates a single connection - * to icd so that icd reference counting works as expected. This is - * needed because DBusDispatcher uses private dbus connections - * which come and go and icd cannot use that information to - * determine whether application quit or not. So we create one - * persistent connection that is only teared down when application - * quits or calls disconnect() - */ -class IcdRefCounting -{ -public: - IcdRefCounting() : first_call(true) { } - void setup(enum icd_connection_flags flag); - void cleanup(); - -private: - bool first_call; - struct DBusConnection *connection; -}; - -Q_GLOBAL_STATIC(IcdRefCounting, icdRefCounting); - - -void IcdRefCounting::setup(enum icd_connection_flags flag) -{ - if (first_call) { - DBusMessage *msg = NULL; - - connection = dbus_bus_get_private(DBUS_BUS_SYSTEM, NULL); - dbus_connection_set_exit_on_disconnect(connection, FALSE); - dbus_connection_setup_with_g_main(connection, NULL); - - msg = dbus_message_new_method_call(ICD_DBUS_API_INTERFACE, - ICD_DBUS_API_PATH, - ICD_DBUS_API_INTERFACE, - ICD_DBUS_API_CONNECT_REQ); - if (msg == NULL) - goto out; - - if (!dbus_message_append_args(msg, - DBUS_TYPE_UINT32, &flag, - DBUS_TYPE_INVALID)) - goto out; - - if (!dbus_connection_send_with_reply(connection, msg, - NULL, 60*1000)) - goto out; - - first_call = false; - return; - - out: - dbus_connection_close(connection); - dbus_connection_unref(connection); - } -} - -void IcdRefCounting::cleanup() -{ - if (!first_call) { - dbus_connection_close(connection); - dbus_connection_unref(connection); - first_call = true; - } -} - - -class IcdPrivate -{ -public: - IcdPrivate(Icd *myfriend) - { - init(10000, IcdNewDbusInterface, myfriend); - } - - IcdPrivate(unsigned int timeout, Icd *myfriend) - { - init(timeout, IcdNewDbusInterface, myfriend); - } - - IcdPrivate(unsigned int timeout, IcdDbusInterfaceVer ver, Icd *myfriend) - { - /* Note that the old Icd interface is currently disabled and - * the new one is always used. - */ - init(timeout, IcdNewDbusInterface, myfriend); - } - - ~IcdPrivate() - { - QObject::disconnect(mDBus, - SIGNAL(signalReceived(const QString&, - const QString&, - const QList&)), - icd, - SLOT(icdSignalReceived(const QString&, - const QString&, - const QList&))); - - QObject::disconnect(mDBus, - SIGNAL(callReply(const QString&, - const QList&, - const QString&)), - icd, - SLOT(icdCallReply(const QString&, - const QList&, - const QString&))); - - delete mDBus; - mDBus = 0; - } - - /* Icd2 dbus API functions */ - QStringList scan(icd_scan_request_flags flags, - QStringList &network_types, - QList& scan_results, - QString& error); - void scanCancel(); - bool connect(icd_connection_flags flags, IcdConnectResult& result); - bool connect(icd_connection_flags flags, QList& params, - IcdConnectResult& result); - bool connect(icd_connection_flags flags, QString& iap, QString& result); - void select(uint flags); - void disconnect(uint connect_flags, QString& service_type, - uint service_attrs, QString& service_id, - QString& network_type, uint network_attrs, - QByteArray& network_id); - void disconnect(uint connect_flags); - - uint state(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStateResult &state_result); - uint statistics(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStatisticsResult& stats_result); - uint addrinfo(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdAddressInfoResult& addr_result); - - uint state(QList& state_results); - uint state_non_blocking(QList& state_results); - uint statistics(QList& stats_results); - uint addrinfo(QList& addr_results); - uint addrinfo_non_blocking(QList& addr_results); - - void signalReceived(const QString& interface, - const QString& signal, - const QList& args); - void callReply(const QString& method, - const QList& args, - const QString& error); - - QString error() { return mError; } - -public: - DBusDispatcher *mDBus; - QString mMethod; - QString mInterface; - QString mSignal; - QString mError; - QList mArgs; - QList receivedSignals; - unsigned int timeout; - IcdDbusInterfaceVer icd_dbus_version; - Icd *icd; - - void init(unsigned int dbus_timeout, IcdDbusInterfaceVer ver, - Icd *myfriend) - { - if (ver == IcdNewDbusInterface) { - mDBus = new DBusDispatcher(ICD_DBUS_API_INTERFACE, - ICD_DBUS_API_PATH, - ICD_DBUS_API_INTERFACE); - } else { - mDBus = new DBusDispatcher(ICD_DBUS_SERVICE, - ICD_DBUS_PATH, - ICD_DBUS_INTERFACE); - } - icd_dbus_version = ver; - - /* This connect has a side effect as it means that only one - * Icd object can exists in one time. This should be fixed! - */ - QObject::connect(mDBus, - SIGNAL(signalReceived(const QString&, - const QString&, - const QList&)), - myfriend, - SLOT(icdSignalReceived(const QString&, - const QString&, - const QList&))); - - QObject::connect(mDBus, - SIGNAL(callReply(const QString&, - const QList&, - const QString&)), - myfriend, - SLOT(icdCallReply(const QString&, - const QList&, - const QString&))); - - icd = myfriend; - timeout = dbus_timeout; - } - - void clearState() - { - mMethod.clear(); - mInterface.clear(); - mSignal.clear(); - mError.clear(); - mArgs.clear(); - receivedSignals.clear(); - } - - bool doConnect(IcdConnectResult& result); - bool doConnect(QString& result); - bool doState(); -}; - - -void IcdPrivate::signalReceived(const QString& interface, - const QString& signal, - const QList& args) -{ - // Signal handler, which simply records what has been signalled - mInterface = interface; - mSignal = signal; - mArgs = args; - - //qDebug() << "signal" << signal << "received:" << args; - receivedSignals << QVariant(interface) << QVariant(signal) << QVariant(args); -} - - -void IcdPrivate::callReply(const QString& method, - const QList& /*args*/, - const QString& error) -{ - mMethod = method; - mError = error; -} - - -static void get_scan_result(QList& args, - IcdScanResult& ret) -{ - int i=0; - - if (args.isEmpty()) - return; - - ret.status = args[i++].toUInt(); - ret.timestamp = args[i++].toUInt(); - ret.scan.service_type = args[i++].toString(); - ret.service_name = args[i++].toString(); - ret.scan.service_attrs = args[i++].toUInt(); - ret.scan.service_id = args[i++].toString(); - ret.service_priority = args[i++].toInt(); - ret.scan.network_type = args[i++].toString(); - ret.network_name = args[i++].toString(); - ret.scan.network_attrs = args[i++].toUInt(); - ret.scan.network_id = args[i++].toByteArray(); - ret.network_priority = args[i++].toInt(); - ret.signal_strength = args[i++].toInt(); - ret.station_id = args[i++].toString(); - ret.signal_dB = args[i++].toInt(); -} - - -static void get_connect_result(QList& args, - IcdConnectResult& ret) -{ - int i=0; - - if (args.isEmpty()) - return; - - ret.connect.service_type = args[i++].toString(); - ret.connect.service_attrs = args[i++].toInt(); - ret.connect.service_id = args[i++].toString(); - ret.connect.network_type = args[i++].toString(); - ret.connect.network_attrs = args[i++].toInt(); - ret.connect.network_id = args[i++].toByteArray(); - ret.status = args[i++].toInt(); -} - - -QStringList IcdPrivate::scan(icd_scan_request_flags flags, - QStringList &network_types, - QList& scan_results, - QString& error) -{ - QStringList scanned_types; - QTimer timer; - QVariant reply; - QVariantList vl; - bool last_result = false; - IcdScanResult result; - int all_waited; - - clearState(); - reply = mDBus->call(ICD_DBUS_API_SCAN_REQ, (uint)flags); - if (reply.type() != QVariant::List) - return scanned_types; - vl = reply.toList(); - if (vl.isEmpty()) { - error = "Scan did not return anything."; - return scanned_types; - } - reply = vl.first(); - scanned_types = reply.toStringList(); - //qDebug() << "Scanning:" << scanned_types; - all_waited = scanned_types.size(); - - timer.setSingleShot(true); - timer.start(timeout); - - scan_results.clear(); - while (!last_result) { - while (timer.isActive() && mInterface.isEmpty() && mError.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - } - - if (!timer.isActive()) { - //qDebug() << "Timeout happened"; - break; - } - - if (mSignal != ICD_DBUS_API_SCAN_SIG) { - //qDebug() << "Received" << mSignal << "while waiting" << ICD_DBUS_API_SCAN_SIG << ", ignoring"; - mInterface.clear(); - continue; - } - - if (mError.isEmpty()) { - QString msgInterface = receivedSignals.takeFirst().toString(); - QString msgSignal = receivedSignals.takeFirst().toString(); - QList msgArgs = receivedSignals.takeFirst().toList(); - //qDebug() << "Signal" << msgSignal << "received."; - //qDebug() << "Params:" << msgArgs; - - while (!msgSignal.isEmpty()) { - get_scan_result(msgArgs, result); - -#if 0 - qDebug() << "Received: " << - "status =" << result.status << - ", timestamp =" << result.timestamp << - ", service_type =" << result.scan.service_type << - ", service_name =" << result.service_name << - ", service_attrs =" << result.scan.service_attrs << - ", service_id =" << result.scan.service_id << - ", service_priority =" << result.service_priority << - ", network_type =" << result.scan.network_type << - ", network_name =" << result.network_name << - ", network_attrs =" << result.scan.network_attrs << - ", network_id =" << "-" << - ", network_priority =" << result.network_priority << - ", signal_strength =" << result.signal_strength << - ", station_id =" << result.station_id << - ", signal_dB =" << result.signal_dB; -#endif - - if (result.status == ICD_SCAN_COMPLETE) { - //qDebug() << "waited =" << all_waited; - if (--all_waited == 0) { - last_result = true; - break; - } - } else - scan_results << result; - - if (receivedSignals.isEmpty()) - break; - - msgInterface = receivedSignals.takeFirst().toString(); - msgSignal = receivedSignals.takeFirst().toString(); - msgArgs = receivedSignals.takeFirst().toList(); - } - mInterface.clear(); - - } else { - qWarning() << "Error while scanning:" << mError; - break; - } - } - timer.stop(); - - error = mError; - return scanned_types; -} - - -void IcdPrivate::scanCancel() -{ - mDBus->call(ICD_DBUS_API_SCAN_CANCEL); -} - - -bool IcdPrivate::doConnect(IcdConnectResult& result) -{ - QTimer timer; - bool status = false; - - timer.setSingleShot(true); - timer.start(timeout); - - //qDebug() << "Waiting" << ICD_DBUS_API_CONNECT_SIG << "signal"; - - while (timer.isActive() && mInterface.isEmpty() && - mSignal != ICD_DBUS_API_CONNECT_SIG && - mError.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - } - - timer.stop(); - - if (mError.isEmpty()) { - if (!mArgs.isEmpty()) { - get_connect_result(mArgs, result); - status = true; - } else - status = false; - } else - status = false; - - return status; -} - - -bool IcdPrivate::connect(icd_connection_flags flags, IcdConnectResult& result) -{ - clearState(); - //mDBus->callAsynchronous(ICD_DBUS_API_CONNECT_REQ, (uint)flags); - mDBus->call(ICD_DBUS_API_CONNECT_REQ, (uint)flags); - icdRefCounting()->setup(flags); - return doConnect(result); -} - - -bool IcdPrivate::connect(icd_connection_flags flags, QList& params, - IcdConnectResult& result) -{ - QVariantList varlist; - QVariantList varlist2; - - foreach (ConnectParams param, params) { - QVariantList items; - - items.append(QVariant(param.connect.service_type)); - items.append(QVariant(param.connect.service_attrs)); - items.append(QVariant(param.connect.service_id)); - items.append(QVariant(param.connect.network_type)); - items.append(QVariant(param.connect.network_attrs)); - items.append(QVariant(param.connect.network_id)); - - varlist.append(items); - } - - varlist2.append(QVariant(varlist)); - - clearState(); - //mDBus->callAsynchronous(ICD_DBUS_API_CONNECT_REQ, (uint)flags, varlist2); - mDBus->call(ICD_DBUS_API_CONNECT_REQ, (uint)flags, varlist2); - icdRefCounting()->setup(flags); - return doConnect(result); -} - - -bool IcdPrivate::doConnect(QString& ret) -{ - QTimer timer; - bool status = false; - - timer.setSingleShot(true); - timer.start(timeout); - - while (timer.isActive() && mInterface.isEmpty() && - mError.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - } - - timer.stop(); - - if (mError.isEmpty()) { - if (!mArgs.isEmpty()) { - status = true; - //ret = mArgs[0]; // TODO correctly - } else - status = false; - } else - status = false; - - return status; -} - - -bool IcdPrivate::connect(icd_connection_flags flags, QString& iap, QString& result) -{ - clearState(); - //mDBus->callAsynchronous(ICD_CONNECT_REQ, iap, (uint)flags); - mDBus->call(ICD_CONNECT_REQ, iap, (uint)flags); - icdRefCounting()->setup(flags); - return doConnect(result); -} - - -void IcdPrivate::select(uint flags) -{ - mDBus->call(ICD_DBUS_API_SELECT_REQ, flags); -} - - -void IcdPrivate::disconnect(uint flags, QString& service_type, - uint service_attrs, QString& service_id, - QString& network_type, uint network_attrs, - QByteArray& network_id) -{ - clearState(); - mDBus->call(ICD_DBUS_API_DISCONNECT_REQ, flags, - service_type, service_attrs, service_id, - network_type, network_attrs, network_id); - icdRefCounting()->cleanup(); -} - - -void IcdPrivate::disconnect(uint flags) -{ - clearState(); - mDBus->call(ICD_DBUS_API_DISCONNECT_REQ, flags); - icdRefCounting()->cleanup(); -} - - -static void get_state_all_result(QList& args, - IcdStateResult& ret) -{ - int i=0; - - ret.params.service_type = args[i++].toString(); - ret.params.service_attrs = args[i++].toUInt(); - ret.params.service_id = args[i++].toString(); - ret.params.network_type = args[i++].toString(); - ret.params.network_attrs = args[i++].toUInt(); - ret.params.network_id = args[i++].toByteArray(); - ret.error = args[i++].toString(); - ret.state = args[i++].toInt(); -} - - -static void get_state_all_result2(QList& args, - IcdStateResult& ret) -{ - int i=0; - - ret.params.network_type = args[i++].toString(); - ret.state = args[i++].toInt(); - - // Initialize the other values so that the caller can - // notice we only returned partial status - ret.params.service_type = QString(); - ret.params.service_attrs = 0; - ret.params.service_id = QString(); - ret.params.network_attrs = 0; - ret.params.network_id = QByteArray(); - ret.error = QString(); -} - - -uint IcdPrivate::state(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStateResult& state_result) -{ - QTimer timer; - QVariant reply; - uint total_signals; - QVariantList vl; - - clearState(); - - reply = mDBus->call(ICD_DBUS_API_STATE_REQ, - service_type, service_attrs, service_id, - network_type, network_attrs, network_id); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - total_signals = reply.toUInt(); - if (!total_signals) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - - if (mSignal != ICD_DBUS_API_STATE_SIG) { - mInterface.clear(); - continue; - } - } - - timer.stop(); - - if (mError.isEmpty()) { - if (!mArgs.isEmpty()) { - if (mArgs.size()>2) - get_state_all_result(mArgs, state_result); - else { - // We are not connected as we did not get the status we asked - return 0; - } - } - } else { - qWarning() << "Error:" << mError; - } - - // The returned value should be one because we asked for one state - return total_signals; -} - - -uint IcdPrivate::state_non_blocking(QList& state_results) -{ - QTimer timer; - QVariant reply; - QVariantList vl; - uint signals_left, total_signals; - IcdStateResult result; - - clearState(); - reply = mDBus->call(ICD_DBUS_API_STATE_REQ); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - signals_left = total_signals = reply.toUInt(); - if (!signals_left) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - state_results.clear(); - mError.clear(); - while (signals_left) { - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - } - - if (!timer.isActive()) { - total_signals = 0; - break; - } - - if (mSignal != ICD_DBUS_API_STATE_SIG) { - continue; - } - - if (mError.isEmpty()) { - if (!mArgs.isEmpty()) { - if (mArgs.size()==2) - get_state_all_result2(mArgs, result); - else - get_state_all_result(mArgs, result); - state_results << result; - } - signals_left--; - } else { - qWarning() << "Error:" << mError; - break; - } - } - timer.stop(); - - return total_signals; -} - - -/* Special version of the state() call which does not call event loop. - * Needed in order to fix NB#175098 where Qt4.7 webkit crashes because event - * loop is run when webkit does not expect it. This function is called from - * bearer management API syncStateWithInterface() in QNetworkSession - * constructor. - */ -uint IcdPrivate::state(QList& state_results) -{ - QTimer timer; - QVariant reply; - QVariantList vl; - uint signals_left, total_signals; - IcdStateResult result; - - clearState(); - reply = mDBus->call(ICD_DBUS_API_STATE_REQ); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - signals_left = total_signals = reply.toUInt(); - if (!signals_left) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - state_results.clear(); - mError.clear(); - while (signals_left) { - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - mDBus->synchronousDispatch(1000); - } - - if (!timer.isActive()) { - total_signals = 0; - break; - } - - if (mSignal != ICD_DBUS_API_STATE_SIG) { - continue; - } - - if (mError.isEmpty()) { - if (!mArgs.isEmpty()) { - if (mArgs.size()==2) - get_state_all_result2(mArgs, result); - else - get_state_all_result(mArgs, result); - state_results << result; - } - signals_left--; - } else { - qWarning() << "Error:" << mError; - break; - } - } - timer.stop(); - - return total_signals; -} - - -static void get_statistics_all_result(QList& args, - IcdStatisticsResult& ret) -{ - int i=0; - - if (args.isEmpty()) - return; - - ret.params.service_type = args[i++].toString(); - ret.params.service_attrs = args[i++].toUInt(); - ret.params.service_id = args[i++].toString(); - ret.params.network_type = args[i++].toString(); - ret.params.network_attrs = args[i++].toUInt(); - ret.params.network_id = args[i++].toByteArray(); - ret.time_active = args[i++].toUInt(); - ret.signal_strength = (enum icd_nw_levels)args[i++].toUInt(); - ret.bytes_sent = args[i++].toUInt(); - ret.bytes_received = args[i++].toUInt(); -} - - -uint IcdPrivate::statistics(QList& stats_results) -{ - QTimer timer; - QVariant reply; - QVariantList vl; - uint signals_left, total_signals; - IcdStatisticsResult result; - - clearState(); - reply = mDBus->call(ICD_DBUS_API_STATISTICS_REQ); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - if (reply.type() != QVariant::UInt) - return 0; - signals_left = total_signals = reply.toUInt(); - - if (!signals_left) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - stats_results.clear(); - while (signals_left) { - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - } - - if (!timer.isActive()) { - total_signals = 0; - break; - } - - if (mSignal != ICD_DBUS_API_STATISTICS_SIG) { - continue; - } - - if (mError.isEmpty()) { - get_statistics_all_result(mArgs, result); - stats_results << result; - signals_left--; - } else { - qWarning() << "Error:" << mError; - break; - } - } - timer.stop(); - - return total_signals; -} - - -uint IcdPrivate::statistics(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStatisticsResult& stats_result) -{ - QTimer timer; - QVariant reply; - uint total_signals; - QVariantList vl; - - clearState(); - - reply = mDBus->call(ICD_DBUS_API_STATISTICS_REQ, - service_type, service_attrs, service_id, - network_type, network_attrs, network_id); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - total_signals = reply.toUInt(); - if (!total_signals) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - - if (mSignal != ICD_DBUS_API_STATISTICS_SIG) { - mInterface.clear(); - continue; - } - } - - timer.stop(); - - if (mError.isEmpty()) { - get_statistics_all_result(mArgs, stats_result); - } else { - qWarning() << "Error:" << mError; - } - - // The returned value should be one because we asked for one statistics - return total_signals; -} - - -static void get_addrinfo_all_result(QList& args, - IcdAddressInfoResult& ret) -{ - int i=0; - - if (args.isEmpty()) - return; - - ret.params.service_type = args[i++].toString(); - ret.params.service_attrs = args[i++].toUInt(); - ret.params.service_id = args[i++].toString(); - ret.params.network_type = args[i++].toString(); - ret.params.network_attrs = args[i++].toUInt(); - ret.params.network_id = args[i++].toByteArray(); - - QVariantList vl = args[i].toList(); - QVariant reply = vl.first(); - QList lst = reply.toList(); - for (int k=0; k& addr_results) -{ - QTimer timer; - QVariant reply; - QVariantList vl; - uint signals_left, total_signals; - IcdAddressInfoResult result; - - clearState(); - reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - if (reply.type() != QVariant::UInt) - return 0; - signals_left = total_signals = reply.toUInt(); - if (!signals_left) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - addr_results.clear(); - while (signals_left) { - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - mDBus->synchronousDispatch(1000); - } - - if (!timer.isActive()) { - total_signals = 0; - break; - } - - if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { - continue; - } - - if (mError.isEmpty()) { - get_addrinfo_all_result(mArgs, result); - addr_results << result; - signals_left--; - } else { - qWarning() << "Error:" << mError; - break; - } - } - timer.stop(); - return total_signals; -} - -uint IcdPrivate::addrinfo_non_blocking(QList& addr_results) -{ - QTimer timer; - QVariant reply; - QVariantList vl; - uint signals_left, total_signals; - IcdAddressInfoResult result; - - clearState(); - reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - if (reply.type() != QVariant::UInt) - return 0; - signals_left = total_signals = reply.toUInt(); - if (!signals_left) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - addr_results.clear(); - while (signals_left) { - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - } - - if (!timer.isActive()) { - total_signals = 0; - break; - } - - if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { - continue; - } - - if (mError.isEmpty()) { - get_addrinfo_all_result(mArgs, result); - addr_results << result; - signals_left--; - } else { - qWarning() << "Error:" << mError; - break; - } - } - timer.stop(); - return total_signals; -} - - -uint IcdPrivate::addrinfo(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdAddressInfoResult& addr_result) -{ - QTimer timer; - QVariant reply; - uint total_signals; - QVariantList vl; - - clearState(); - - reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ, - service_type, service_attrs, service_id, - network_type, network_attrs, network_id); - if (reply.type() != QVariant::List) - return 0; - vl = reply.toList(); - if (vl.isEmpty()) - return 0; - reply = vl.first(); - total_signals = reply.toUInt(); - - if (!total_signals) - return 0; - - timer.setSingleShot(true); - timer.start(timeout); - - mInterface.clear(); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - - if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { - mInterface.clear(); - continue; - } - } - - timer.stop(); - - if (mError.isEmpty()) { - get_addrinfo_all_result(mArgs, addr_result); - } else { - qWarning() << "Error:" << mError; - } - - // The returned value should be one because we asked for one addrinfo - return total_signals; -} - - -Icd::Icd(QObject *parent) - : QObject(parent), d(new IcdPrivate(this)) -{ -} - -Icd::Icd(unsigned int timeout, QObject *parent) - : QObject(parent), d(new IcdPrivate(timeout, this)) -{ -} - -Icd::Icd(unsigned int timeout, IcdDbusInterfaceVer ver, QObject *parent) - : QObject(parent), d(new IcdPrivate(timeout, ver, this)) -{ -} - -Icd::~Icd() -{ - delete d; -} - - -QStringList Icd::scan(icd_scan_request_flags flags, - QStringList &network_types, - QList& scan_results, - QString& error) -{ - return d->scan(flags, network_types, scan_results, error); -} - - -void Icd::scanCancel() -{ - d->scanCancel(); -} - - -bool Icd::connect(icd_connection_flags flags, IcdConnectResult& result) -{ - return d->connect(flags, result); -} - - -bool Icd::connect(icd_connection_flags flags, QList& params, - IcdConnectResult& result) -{ - return d->connect(flags, params, result); -} - - -bool Icd::connect(icd_connection_flags flags, QString& iap, QString& result) -{ - return d->connect(flags, iap, result); -} - - -void Icd::select(uint flags) -{ - d->select(flags); -} - - -void Icd::disconnect(uint connect_flags, QString& service_type, - uint service_attrs, QString& service_id, - QString& network_type, uint network_attrs, - QByteArray& network_id) -{ - d->disconnect(connect_flags, service_type, - service_attrs, service_id, - network_type, network_attrs, - network_id); -} - - -void Icd::disconnect(uint connect_flags) -{ - d->disconnect(connect_flags); -} - - -uint Icd::state(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStateResult &state_result) -{ - return d->state(service_type, service_attrs, service_id, - network_type, network_attrs, network_id, - state_result); -} - - -uint Icd::statistics(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStatisticsResult& stats_result) -{ - return d->statistics(service_type, service_attrs, service_id, - network_type, network_attrs, network_id, - stats_result); -} - - -uint Icd::addrinfo(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdAddressInfoResult& addr_result) -{ - return d->addrinfo(service_type, service_attrs, service_id, - network_type, network_attrs, network_id, - addr_result); -} - - -uint Icd::state(QList& state_results) -{ - return d->state(state_results); -} - -uint Icd::state_non_blocking(QList& state_results) -{ - return d->state_non_blocking(state_results); -} - -uint Icd::statistics(QList& stats_results) -{ - return d->statistics(stats_results); -} - - -uint Icd::addrinfo(QList& addr_results) -{ - return d->addrinfo(addr_results); -} - -uint Icd::addrinfo_non_blocking(QList& addr_results) -{ - return d->addrinfo_non_blocking(addr_results); -} - -void Icd::icdSignalReceived(const QString& interface, - const QString& signal, - const QList& args) -{ - d->signalReceived(interface, signal, args); -} - - -void Icd::icdCallReply(const QString& method, - const QList& args, - const QString& error) -{ - d->callReply(method, args, error); -} - - -QString Icd::error() -{ - return d->error(); -} - -} // Maemo namespace - - diff --git a/src/3rdparty/libconninet/src/maemo_icd.h b/src/3rdparty/libconninet/src/maemo_icd.h deleted file mode 100644 index d7a8d5b..0000000 --- a/src/3rdparty/libconninet/src/maemo_icd.h +++ /dev/null @@ -1,182 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#ifndef MAEMO_ICD_H -#define MAEMO_ICD_H - -#include -#include -#include -#include -#include -#include - -#include -#include -#include -#include - -#include "dbusdispatcher.h" -#include - -#define ICD_LONG_SCAN_TIMEOUT (30*1000) /* 30sec */ -#define ICD_SHORT_SCAN_TIMEOUT (10*1000) /* 10sec */ -#define ICD_SHORT_CONNECT_TIMEOUT (10*1000) /* 10sec */ -#define ICD_LONG_CONNECT_TIMEOUT (150*1000) /* 2.5min */ - -namespace Maemo { - -struct CommonParams { - QString service_type; - uint service_attrs; - QString service_id; - QString network_type; - uint network_attrs; - QByteArray network_id; -}; - -struct ConnectParams { - struct CommonParams connect; -}; - -struct IcdScanResult { - uint status; // see #icd_scan_status - uint timestamp; // when last seen - QString service_name; - uint service_priority; // within a service type - QString network_name; - uint network_priority; - struct CommonParams scan; - uint signal_strength; // quality, 0 (none) - 10 (good) - QString station_id; // e.g. MAC address or similar id - uint signal_dB; // use signal strength above unless you know what you are doing - - IcdScanResult() { - status = timestamp = scan.service_attrs = service_priority = - scan.network_attrs = network_priority = signal_strength = - signal_dB = 0; - } -}; - -struct IcdConnectResult { - struct CommonParams connect; - uint status; -}; - -struct IcdStateResult { - struct CommonParams params; - QString error; - uint state; -}; - -struct IcdStatisticsResult { - struct CommonParams params; - uint time_active; // in seconds - enum icd_nw_levels signal_strength; // see network_api_defines.h in icd2-dev package - uint bytes_sent; - uint bytes_received; -}; - -struct IcdIPInformation { - QString address; - QString netmask; - QString default_gateway; - QString dns1; - QString dns2; - QString dns3; -}; - -struct IcdAddressInfoResult { - struct CommonParams params; - QList ip_info; -}; - -enum IcdDbusInterfaceVer { - IcdOldDbusInterface = 0, // use the old OSSO-IC interface - IcdNewDbusInterface // use the new Icd2 interface (default) -}; - - -class IcdPrivate; -class Icd : public QObject -{ - Q_OBJECT - -public: - Icd(QObject *parent = 0); - Icd(unsigned int timeout, QObject *parent = 0); - Icd(unsigned int timeout, IcdDbusInterfaceVer ver, QObject *parent = 0); - ~Icd(); - QString error(); // returns last error string - - /* Icd2 dbus API functions */ - QStringList scan(icd_scan_request_flags flags, - QStringList &network_types, - QList& scan_results, - QString& error); - void scanCancel(); - bool connect(icd_connection_flags flags, IcdConnectResult& result); - bool connect(icd_connection_flags flags, QList& params, - IcdConnectResult& result); - bool connect(icd_connection_flags flags, QString& iap, QString& result); - void select(uint flags); - void disconnect(uint connect_flags, QString& service_type, - uint service_attrs, QString& service_id, - QString& network_type, uint network_attrs, - QByteArray& network_id); - void disconnect(uint connect_flags); - - uint state(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStateResult &state_result); - uint statistics(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdStatisticsResult& stats_result); - uint addrinfo(QString& service_type, uint service_attrs, - QString& service_id, QString& network_type, - uint network_attrs, QByteArray& network_id, - IcdAddressInfoResult& addr_result); - - uint state(QList& state_results); - uint state_non_blocking(QList& state_results); - uint statistics(QList& stats_results); - uint addrinfo(QList& addr_results); - uint addrinfo_non_blocking(QList& addr_results); - -private Q_SLOTS: - void icdSignalReceived(const QString& interface, - const QString& signal, - const QList& args); - void icdCallReply(const QString& method, - const QList& args, - const QString& error); - -private: - IcdPrivate *d; - friend class IcdPrivate; -}; - -} // Maemo namespace - -#endif diff --git a/src/3rdparty/libconninet/src/proxyconf.cpp b/src/3rdparty/libconninet/src/proxyconf.cpp deleted file mode 100644 index 5b27565..0000000 --- a/src/3rdparty/libconninet/src/proxyconf.cpp +++ /dev/null @@ -1,315 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2010 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#include -#include -#include -#include -#include -#include -#include "proxyconf.h" - -#define CONF_PROXY "/system/proxy" -#define HTTP_PROXY "/system/http_proxy" - - -namespace Maemo { - -class NetworkProxyFactory : QNetworkProxyFactory { -public: - NetworkProxyFactory() { } - QList queryProxy(const QNetworkProxyQuery &query = QNetworkProxyQuery()); -}; - - -QList NetworkProxyFactory::queryProxy(const QNetworkProxyQuery &query) -{ - ProxyConf proxy_conf; - - QList result = proxy_conf.flush(query); - if (result.isEmpty()) - result << QNetworkProxy::NoProxy; - - return result; -} - - -class ProxyConfPrivate { -private: - // proxy values from gconf - QString mode; - bool use_http_host; - QString autoconfig_url; - QString http_proxy; - quint16 http_port; - QList ignore_hosts; - QString secure_host; - quint16 secure_port; - QString ftp_host; - quint16 ftp_port; - QString socks_host; - quint16 socks_port; - QString rtsp_host; - quint16 rtsp_port; - - QVariant getValue(QString& name); - QVariant getHttpValue(QString& name); - QVariant getValue(const char *name); - QVariant getHttpValue(const char *name); - bool isHostExcluded(const QString &host); - -public: - QString prefix; - QString http_prefix; - - void readProxyData(); - QList flush(const QNetworkProxyQuery &query); -}; - - -QVariant ProxyConfPrivate::getValue(QString& name) -{ - GConfItem item(prefix + name); - return item.value(); -} - -QVariant ProxyConfPrivate::getHttpValue(QString& name) -{ - GConfItem item(http_prefix + name); - return item.value(); -} - - -QVariant ProxyConfPrivate::getValue(const char *name) -{ - QString n = QString(name); - return getValue(n); -} - -QVariant ProxyConfPrivate::getHttpValue(const char *name) -{ - QString n = QString(name); - return getHttpValue(n); -} - - -#define GET(var, type) \ - do { \ - var = getValue(#var).to##type (); \ - /*qDebug()<<"var="<prefix = CONF_PROXY "/"; - d_ptr->http_prefix = HTTP_PROXY "/"; -} - -ProxyConf::~ProxyConf() -{ - delete d_ptr; -} - - -QList ProxyConf::flush(const QNetworkProxyQuery &query) -{ - d_ptr->readProxyData(); - return d_ptr->flush(query); -} - - -static int refcount = 0; -static QReadWriteLock lock; - -void ProxyConf::update() -{ - QWriteLocker locker(&lock); - NetworkProxyFactory *factory = new NetworkProxyFactory(); - QNetworkProxyFactory::setApplicationProxyFactory((QNetworkProxyFactory*)factory); - refcount++; -} - - -void ProxyConf::clear(void) -{ - QWriteLocker locker(&lock); - refcount--; - if (refcount == 0) - QNetworkProxyFactory::setApplicationProxyFactory(NULL); - - if (refcount<0) - refcount = 0; -} - - -} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/proxyconf.h b/src/3rdparty/libconninet/src/proxyconf.h deleted file mode 100644 index 7711c49..0000000 --- a/src/3rdparty/libconninet/src/proxyconf.h +++ /dev/null @@ -1,53 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2010 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - -#ifndef PROXYCONF_H -#define PROXYCONF_H - -#include -#include - -namespace Maemo { - -class ProxyConfPrivate; -class ProxyConf { -private: - ProxyConfPrivate *d_ptr; - -public: - ProxyConf(); - virtual ~ProxyConf(); - - QList flush(const QNetworkProxyQuery &query = QNetworkProxyQuery()); // read the proxies from db - - /* Note that for each update() call there should be corresponding - * clear() call because the ProxyConf class implements a reference - * counting mechanism. The factory is removed only when there is - * no one using the factory any more. - */ - static void update(void); // this builds QNetworkProxy factory - static void clear(void); // this removes QNetworkProxy factory -}; - -} // namespace Maemo - -#endif diff --git a/src/3rdparty/libconninet/tests/Makefile.am b/src/3rdparty/libconninet/tests/Makefile.am deleted file mode 100644 index f6f41ea..0000000 --- a/src/3rdparty/libconninet/tests/Makefile.am +++ /dev/null @@ -1,39 +0,0 @@ -DEFS = -DDBUS_API_SUBJECT_TO_CHANGE -INCLUDES = @GLIB_CFLAGS@ @DBUS_CFLAGS@ @CONNSETTINGS_CFLAGS@ @OSSO_IC_CFLAGS@ @ICD_DEV_CFLAGS@ \ - @QTCORE_CFLAGS@ @QTDBUS_CFLAGS@ @QTCORE_CFLAGS@ @QTNETWORK_CFLAGS@ @QTTEST_CFLAGS@ \ - -I$(top_srcdir) \ - -I$(top_srcdir)/src - -LIBS = @GLIB_LIBS@ @DBUS_LIBS@ @CONNSETTINGS_LIBS@ @OSSO_IC_LIBS@ @ICD_DEV_LIBS@ \ - @QTCORE_LIBS@ @QTDBUS_LIBS@ @QTCORE_LIBS@ @QTNETWORK_LIBS@ @QTTEST_LIBS@ \ - $(top_builddir)/src/libconninet.la - -AM_CFLAGS = $(CONCFLAGS) -AM_LDFLAGS = -static - -bin_PROGRAMS = test_dbusdispatcher test_iapconf test_maemo_icd test_iapmonitor test_proxyconf - -test_dbusdispatcher_SOURCES = ut_dbusdispatcher.cpp -ut_dbusdispatcher.o: ut_dbusdispatcher.moc - -test_iapconf_SOURCES = ut_iapconf.cpp -ut_iapconf.o: ut_iapconf.moc - -test_maemo_icd_SOURCES = ut_maemo_icd.cpp -ut_maemo_icd.o: ut_maemo_icd.moc - -test_iapmonitor_SOURCES = ut_iapmonitor.cpp -ut_iapmonitor.o: ut_iapmonitor.moc - -test_proxyconf_SOURCES = ut_proxyconf.cpp -ut_proxyconf.o: ut_proxyconf.moc - - -MAINTAINERCLEANFILES = Makefile.in - -# This rule lets GNU make create any *.moc from the equivalent *.cpp -%.moc: %.cpp - moc $< -o $@ - -# This line ensures that generated moc files are deleted when we make clean. -CLEANFILES = *.moc diff --git a/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp b/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp deleted file mode 100644 index 70deb3f..0000000 --- a/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp +++ /dev/null @@ -1,191 +0,0 @@ -/* * This file is part of conn-dui-settings-inet * - * - * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). - * All rights reserved. - * - * Contact: Aapo Makela - * - * This software, including documentation, is protected by copyright - * controlled by Nokia Corporation. All rights are reserved. Copying, - * including reproducing, storing, adapting or translating, any or all of - * this material requires the prior written consent of Nokia Corporation. - * This material also contains confidential information which may not be - * disclosed to others without the prior written consent of Nokia. - */ - -#include -#include -#include -#include -#include - -#include - -class Ut_DBusDispatcher : public QObject -{ - Q_OBJECT - -private Q_SLOTS: - void init(); - void cleanup(); - void initTestCase(); - void cleanupTestCase(); - - void simpleSignalReceived(const QString& interface, - const QString& signal, - const QList& args); - void simpleCallReply(const QString& method, - const QList& args, - const QString& error); - void simpleCall(); - - void complexCallReply(const QString& method, - const QList& args, - const QString& error); - void complexCall(); - -private: - Maemo::DBusDispatcher *mSubject; - QProcess *icd_stub; - - QString mMethod; - QString mInterface; - QString mSignal; - QList mArgs; -}; - -void Ut_DBusDispatcher::init() -{ - mSubject = new Maemo::DBusDispatcher("com.nokia.icd2", "/com/nokia/icd2", - "com.nokia.icd2"); - - // Start icd2 stub - icd_stub = new QProcess(this); - icd_stub->start("/usr/bin/icd2_stub.py"); - QTest::qWait(1000); -} - -void Ut_DBusDispatcher::cleanup() -{ - // Terminate icd2 stub - icd_stub->terminate(); - icd_stub->waitForFinished(); - - delete mSubject; - mSubject = 0; -} - -void Ut_DBusDispatcher::initTestCase() -{ -} - -void Ut_DBusDispatcher::cleanupTestCase() -{ -} - -void Ut_DBusDispatcher::simpleSignalReceived(const QString& interface, - const QString& signal, - const QList& args) -{ - // Signal handler, which simply records what has been signalled - mInterface = interface; - mSignal = signal; - mArgs = args; -} - -void Ut_DBusDispatcher::simpleCallReply(const QString& method, - const QList& args, - const QString& error) -{ - mMethod = method; - - // Check that method matches and at least WLAN_INFRA is returned - QVERIFY(error.isEmpty()); - QVERIFY(args[0].toStringList().contains("WLAN_INFRA")); -} - -void Ut_DBusDispatcher::simpleCall() -{ - uint flags = 0; - QList reply; - int idx = 0; - QTimer timer; - - // Connect signals - connect(mSubject, SIGNAL(signalReceived(const QString&, - const QString&, - const QList&)), - this, SLOT(simpleSignalReceived(const QString&, - const QString&, - const QList&))); - connect(mSubject, SIGNAL(callReply(const QString&, - const QList&, - const QString&)), - this, SLOT(simpleCallReply(const QString&, - const QList&, - const QString&))); - - // Request scan and verify the call starts succesfully - QVERIFY(mSubject->callAsynchronous("scan_req", flags)); - - // Wait 1st scan signal for 10 secs - timer.setSingleShot(true); - timer.start(10000); - while (timer.isActive() && mInterface.isEmpty()) { - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - idx++; - } - timer.stop(); - - // Sanity checks for the scan result - QVERIFY(mInterface == "com.nokia.icd2"); // interface is icd2 - QVERIFY(mMethod == "scan_req"); // method is scan_req - QVERIFY(mSignal == "scan_result_sig"); // signal is scan result - QVERIFY(mArgs[0] == QVariant(0) || - mArgs[0] == QVariant(4)); // First argument is status - // (0 == NEW, 4 == COMPLETED) - //QVERIFY(mArgs.contains(QVariant("WLAN_INFRA"))); // WLAN scan result -} - -void Ut_DBusDispatcher::complexCallReply(const QString& method, - const QList& args, - const QString& error) -{ - mMethod = method; - - // Check that method has not return arguments and error is not set - QVERIFY(error.isEmpty()); - QVERIFY(args.isEmpty()); -} - -void Ut_DBusDispatcher::complexCall() -{ - uint flags = ICD_CONNECTION_FLAG_UI_EVENT; - QList reply; - QVariantList networks; - QVariantList network1; - - network1 << "" << (uint)0 << "" << "WLAN_INFRA" << (uint)0x05000011 << QByteArray("osso@46@net"); - networks << QVariant(network1); - - // Connect signal - connect(mSubject, SIGNAL(callReply(const QString&, - const QList&, - const QString&)), - this, SLOT(complexCallReply(const QString&, - const QList&, - const QString&))); - - // Request connect and verify the call starts succesfully - QVERIFY(mSubject->callAsynchronous("connect_req", flags, networks)); - - QTest::qWait(1000); - - // Sanity checks for the scan result - QVERIFY(mInterface == "com.nokia.icd2"); // interface is icd2 - QVERIFY(mMethod == "connect_req"); // method connect_req -} - -QTEST_MAIN(Ut_DBusDispatcher) - -#include "ut_dbusdispatcher.moc" diff --git a/src/3rdparty/libconninet/tests/ut_iapconf.cpp b/src/3rdparty/libconninet/tests/ut_iapconf.cpp deleted file mode 100644 index 6a91d61..0000000 --- a/src/3rdparty/libconninet/tests/ut_iapconf.cpp +++ /dev/null @@ -1,186 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009 Nokia Corporation. All rights reserved. - - Contact: Aapo Makela - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - - -#include -#include - -#include - -class Ut_IAPConf : public QObject -{ - Q_OBJECT - -private Q_SLOTS: - void init(); - void cleanup(); - void initTestCase(); - void cleanupTestCase(); - - void setupIAP(); - void setupIAPContainingDot(); - void unsetIAPValueIsNotValid(); - void verifyAllIAPs(); - void allForEmptyConfReturnsEmptyList(); - void settingInvalidValueUnsetsKey(); - -private: - Maemo::IAPConf *mSubject; -}; - -void Ut_IAPConf::init() -{ - mSubject = new Maemo::IAPConf("test_iap"); -} - -void Ut_IAPConf::cleanup() -{ - // Clear made settings - mSubject->clear(); - - delete mSubject; - mSubject = 0; -} - -void Ut_IAPConf::initTestCase() -{ -} - -void Ut_IAPConf::cleanupTestCase() -{ -} - -void Ut_IAPConf::setupIAP() -{ - // Set bunch of values - mSubject->set("ipv4_type", "AUTO", - "wlan_wepkey1", "connt", - "wlan_wepdefkey", 1, - "wlan_ssid", QByteArray("CONNTEST-1")); - - // Set one value - mSubject->setValue("type", "WLAN_INFRA"); - - // Check all values that they were set correctly - QVERIFY(mSubject->value("ipv4_type").toString() == "AUTO"); - QVERIFY(mSubject->value("wlan_wepkey1").toString() == "connt"); - QVERIFY(mSubject->value("wlan_wepdefkey").toInt() == 1); - QVERIFY(mSubject->value("wlan_ssid").toByteArray() == QByteArray("CONNTEST-1")); - QVERIFY(mSubject->value("type").toString() == "WLAN_INFRA"); -} - -void Ut_IAPConf::setupIAPContainingDot() -{ - delete mSubject; - mSubject = new Maemo::IAPConf("test.iap"); - - // Set and check one value - mSubject->setValue("type", "DUMMY"); - QVERIFY(mSubject->value("type").toString() == "DUMMY"); -} - -void Ut_IAPConf::unsetIAPValueIsNotValid() -{ - QVariant invalidValue = mSubject->value("this_value_does_not_exist"); - QVERIFY(invalidValue.isValid() == false); -} - -void Ut_IAPConf::verifyAllIAPs() -{ - int count = 0, extras = 0; - QRegExp regexp("iap[1-3]"); - Maemo::IAPConf iap1("iap1"); - Maemo::IAPConf iap2("iap2"); - Maemo::IAPConf iap3("iap3"); - - iap1.clear(); - iap2.clear(); - iap3.clear(); - - iap1.setValue("name", "iap1"); - iap2.setValue("name", "iap2"); - iap3.setValue("name", "iap3"); - - count = extras = 0; - QList iaps; - Maemo::IAPConf::getAll(iaps, true); - foreach (QString iap_path, iaps) { - QString iap_id = iap_path.section('/', 5); /* This is the IAP id */ - if (!iap_id.contains(regexp)) { - extras++; - continue; - } - Maemo::IAPConf iap(iap_id); - QString name = iap.value("name").toString(); - QVERIFY(name == iap_id); - count++; - } - QCOMPARE(count, iaps.size()-extras); - - iap1.clear(); - iap2.clear(); - iap3.clear(); - - iap1.setValue("name", "iap1"); - iap2.setValue("name", "iap2"); - iap3.setValue("name", "iap3"); - - count = extras = 0; - Maemo::IAPConf::getAll(iaps); - foreach (QString iap_id, iaps) { - if (!iap_id.contains(regexp)) { - extras++; - continue; - } - Maemo::IAPConf iap(iap_id); - QString name = iap.value("name").toString(); - QVERIFY(name == iap_id); - count++; - } - QCOMPARE(count, iaps.size()-extras); -} - -void Ut_IAPConf::allForEmptyConfReturnsEmptyList() -{ - // Clear everything in configuration - mSubject->clearAll(); - - // Get all for a list and check that it is empty - QStringList iaps; - mSubject->getAll(iaps); - QVERIFY(iaps.isEmpty()); -} - -void Ut_IAPConf::settingInvalidValueUnsetsKey() -{ - // Setup some IAP - setupIAP(); - - // Set invalid value to unset "wlan_wepdefkey" key and verify that the - // value is unset - mSubject->setValue("wlan_wepdefkey", QVariant()); - QVERIFY(!mSubject->value("wlan_wepdefkey").isValid()); -} - -QTEST_MAIN(Ut_IAPConf) - -#include "ut_iapconf.moc" diff --git a/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp b/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp deleted file mode 100644 index f14f623..0000000 --- a/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp +++ /dev/null @@ -1,118 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - - -#include -#include - -#include -#include - -static const char *iap_id = "test_monitor_1"; - -class TestIAPMonitor : public Maemo::IAPMonitor -{ -public: - QString addedIap; - QString removedIap; - -protected: - virtual void iapAdded(const QString &id) - { - addedIap = id; - } - - virtual void iapRemoved(const QString &id) - { - removedIap = id; - } -}; - -class Ut_IAPMonitor : public QObject -{ - Q_OBJECT - -private Q_SLOTS: - void init(); - void cleanup(); - void initTestCase(); - void cleanupTestCase(); - - void check(); - -private: - TestIAPMonitor *mon; - Maemo::IAPConf *iap; -}; - -void Ut_IAPMonitor::init() -{ - mon = new TestIAPMonitor; -} - -void Ut_IAPMonitor::cleanup() -{ - delete mon; - mon = 0; -} - -void Ut_IAPMonitor::initTestCase() -{ -} - -void Ut_IAPMonitor::cleanupTestCase() -{ -} - -void Ut_IAPMonitor::check() -{ - QVERIFY(mon->addedIap.isEmpty()); - - iap = new Maemo::IAPConf(iap_id); - iap->set("ipv4_type", "AUTO", - "wlan_wepkey1", "connt", - "wlan_wepdefkey", 1, - "wlan_ssid", QByteArray(iap_id)); - - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - QVERIFY(mon->addedIap == iap_id); - mon->addedIap.clear(); - - QVERIFY(mon->removedIap.isEmpty()); - - // Unset only one value and verify that IAP is not removed - iap->set("ipv4_type", QVariant()); - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - QVERIFY(mon->removedIap.isEmpty()); - - // Clear the whole IAP and check that it is removed - iap->clear(); - delete iap; - - QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); - - QVERIFY(mon->removedIap == iap_id); -} - -QTEST_MAIN(Ut_IAPMonitor) - -#include "ut_iapmonitor.moc" diff --git a/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp b/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp deleted file mode 100644 index 494829d..0000000 --- a/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp +++ /dev/null @@ -1,274 +0,0 @@ -/* - * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). - * All rights reserved. - * - * Contact: Jukka Rissanen - * - * This library is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * version 2.1 as published by the Free Software Foundation. - * - * This library is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * Lesser General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public - * License along with this library; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - * 02110-1301 USA - */ - - -// !!!! -// !!!! NOTE: THESE TEST DO NOT REALLY WORK YET BECAUSE OF MISSING -// !!!! FUNCTIONALITY IN ICD2 STUB. YOU HAVE BEEN WARNED. -// !!!! - - -#include -#include -#include -#include -#include - -#include "maemo_icd.h" - -class Ut_MaemoIcd : public QObject -{ - Q_OBJECT - -private Q_SLOTS: - void init(); - void cleanup(); - void initTestCase(); - void cleanupTestCase(); - - void scan_req(); - void scan_cancel_req(); - void connect_req_default(); - void state_req_all(); - void state_req(); - void statistics_req_all(); - void statistics_req(); - void addrinfo_req_all(); - void addrinfo_req(); - -private: - void disconnect_req_default(); // this is currently not run - void connect_req_specific(); // this is currently not run - QProcess *icd_stub; - bool connect_iap(Maemo::IcdConnectResult &connect_result, - QString &result, - QString &error, - QString iap=QString()); -}; - - -QString create_error_str(Maemo::Icd &icd) -{ - return icd.error(); -} - - -void Ut_MaemoIcd::init() -{ - icd_stub = new QProcess(this); - icd_stub->setStandardOutputFile("/tmp/ut_maemo_icd.log"); - icd_stub->start("/usr/bin/icd2_stub.py"); - QTest::qWait(1000); - - // Set the statistics - QProcess dbus_send; - dbus_send.start("dbus-send --type=method_call --system " - "--dest=com.nokia.icd2 /com/nokia/icd2 " - "com.nokia.icd2.testing.set_statistics " - "uint32:1024 uint32:256"); - dbus_send.waitForFinished(); - -} - -void Ut_MaemoIcd::cleanup() -{ - icd_stub->terminate(); - icd_stub->waitForFinished(); -} - -void Ut_MaemoIcd::initTestCase() -{ -} - -void Ut_MaemoIcd::cleanupTestCase() -{ -} - -void Ut_MaemoIcd::scan_req() -{ - QList scanned; - QStringList scannedNetworkTypes; - QStringList networkTypesToScan; - QString error; - Maemo::Icd icd(ICD_SHORT_SCAN_TIMEOUT); - - scannedNetworkTypes = icd.scan(ICD_SCAN_REQUEST_ACTIVE, - networkTypesToScan, - scanned, - error); - QVERIFY(error.isEmpty()); - QCOMPARE(scanned.size(), 3); - QVERIFY(scannedNetworkTypes[0] == "WLAN_INFRA"); - QVERIFY(scannedNetworkTypes[1] == "DUN_GSM_PS"); -} - -void Ut_MaemoIcd::scan_cancel_req() -{ - Maemo::Icd icd; - icd.scanCancel(); - // Not much to verify here -} - -bool Ut_MaemoIcd::connect_iap(Maemo::IcdConnectResult &connect_result, - QString &result, - QString &error, - QString iap) -{ - icd_connection_flags flags = ICD_CONNECTION_FLAG_USER_EVENT; - bool st; - Maemo::Icd icd(ICD_SHORT_CONNECT_TIMEOUT); - - if (iap.isEmpty()) { - qDebug() << "connecting to default IAP"; - st = icd.connect(flags, connect_result); - } else { - qDebug() << "connecting to" << iap; - st = icd.connect(flags, iap, result); - } - - error = create_error_str(icd); - return st; -} - -void Ut_MaemoIcd::connect_req_default() -{ - Maemo::IcdConnectResult connect_result; - QString result, error; - bool st; - st = connect_iap(connect_result, result, error); - QVERIFY2(st, error.toAscii().data()); - result = connect_result.connect.network_id.data(); - qDebug() << result; -} - - -void Ut_MaemoIcd::disconnect_req_default() -{ - icd_connection_flags flags = ICD_CONNECTION_FLAG_USER_EVENT; - bool st; - Maemo::Icd icd(ICD_SHORT_CONNECT_TIMEOUT); - icd.disconnect(flags); -} - - -void Ut_MaemoIcd::connect_req_specific() -{ - Maemo::IcdConnectResult connect_result; - QString result; - QString error; - bool st; - st = connect_iap(connect_result, result, error, "wpa2gx2.osso.net"); - QVERIFY2(st, error.toAscii().data()); - qDebug() << result; -} - - -void Ut_MaemoIcd::state_req_all() -{ - QList state_results; - Maemo::Icd icd; - int sig; - sig = icd.state(state_results); - QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); -} - - -void Ut_MaemoIcd::state_req() -{ - Maemo::IcdStateResult state_result; - Maemo::Icd icd; - int sig; - QString service_type, service_id; - QString network_type("WLAN_INFRA"); - QByteArray network_id("wpa2gx2.osso.net"); - sig = icd.state(service_type, 0, service_id, - network_type, (uint)0x17a1, network_id, - state_result); - QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); -} - - -void Ut_MaemoIcd::statistics_req_all() -{ - QList stats_results; - Maemo::Icd icd; - int sig; - QString err; - sig = icd.statistics(stats_results); - err = create_error_str(icd); - if (!err.isEmpty()) - QVERIFY2(sig==1, err.toAscii().data()); - else - QCOMPARE(sig, 1); - - for(int i=0; i addr_results; - Maemo::Icd icd; - int sig; - sig = icd.addrinfo(addr_results); - QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); -} - - -void Ut_MaemoIcd::addrinfo_req() -{ - Maemo::IcdAddressInfoResult addr_result; - Maemo::Icd icd; - int sig; - QString service_type, service_id; - QString network_type("WLAN_INFRA"); - QByteArray network_id("wpa2gx2.osso.net"); - sig = icd.addrinfo(service_type, 0, service_id, - network_type, (uint)0x17a1, network_id, - addr_result); - QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); -} - - -QTEST_MAIN(Ut_MaemoIcd) - -#include "ut_maemo_icd.moc" diff --git a/src/3rdparty/libconninet/tests/ut_proxyconf.cpp b/src/3rdparty/libconninet/tests/ut_proxyconf.cpp deleted file mode 100644 index 1f407f0..0000000 --- a/src/3rdparty/libconninet/tests/ut_proxyconf.cpp +++ /dev/null @@ -1,400 +0,0 @@ -/* - libconninet - Internet Connectivity support library - - Copyright (C) 2010 Nokia Corporation. All rights reserved. - - Contact: Jukka Rissanen - - This library is free software; you can redistribute it and/or - modify it under the terms of the GNU Lesser General Public License - version 2.1 as published by the Free Software Foundation. - - This library is distributed in the hope that it will be useful, but - WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - Lesser General Public License for more details. - - You should have received a copy of the GNU Lesser General Public - License along with this library; if not, write to the Free Software - Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA - 02110-1301 USA -*/ - - -#include -#include -#include -#include - -#include "../src/proxyconf.h" - -class Ut_ProxyConf : public QObject -{ - Q_OBJECT - -private Q_SLOTS: - void init(); - void cleanup(); - void initTestCase(); - void cleanupTestCase(); - - // tests without the factory - void proxy_ftp_no_factory_ok_auto(); - void proxy_ftp_no_factory_ok_manual(); - void proxy_http_no_factory_ok_manual(); - void proxy_https_no_factory_ok_manual(); - void proxy_socks_no_factory_ok_manual(); - void proxy_default_no_factory_ok_manual(); - - // tests using the factory - void proxy_ftp_factory_ok_auto(); - void proxy_ftp_factory_ok_manual(); - void proxy_http_factory_ok_manual(); - void proxy_https_factory_ok_manual(); - void proxy_socks_factory_ok_manual(); - void proxy_http_factory_ok_manual_clear(); - void proxy_default_factory_ok_manual(); - void proxy_http_factory_ok_manual_ignore_list(); - void proxy_default_factory_ok_manual_system(); - -private: - Maemo::ProxyConf *pc; -}; - - -void put(QString var, QString type, QString value) -{ - QProcess gconf; - if (value.isEmpty()) - gconf.start(QString("gconftool-2 -u /system/proxy/"+var)); - else - gconf.start(QString("gconftool-2 -s /system/proxy/"+var+" -t "+type+" "+value)); - gconf.waitForFinished(); -} - -void put_http(QString var, QString type, QString value) -{ - QProcess gconf; - if (value.isEmpty()) - gconf.start(QString("gconftool-2 -u /system/http_proxy/"+var)); - else - gconf.start(QString("gconftool-2 -s /system/http_proxy/"+var+" -t "+type+" "+value)); - gconf.waitForFinished(); -} - -void put_list(QString var, QString type, QList value) -{ - QProcess gconf; - QString values = "["; - foreach (QString str, value) - values = values + str + ","; - values.chop(1); - values = values + "]"; - - gconf.start(QString("gconftool-2 -s /system/http_proxy/"+var+" -t list --list-type="+type+" "+values)); - gconf.waitForFinished(); -} - - -void Ut_ProxyConf::init() -{ - put_http("host", "string", "my.proxy.com"); - put_http("port", "int", "8080"); - - QList list; - list.append("foo.bar.com"); - list.append("192.168.19.69"); - list.append("192.168.20.0/24"); - list.append("bar.foo.com"); - put_list("ignore_hosts", "string", list); - put_http("use_http_host", "boolean", "true"); - - put("mode", "string", "auto"); - put("autoconfig_url", "string", "http://foo.bar.com/autoconf"); - put("secure_host", "string", "secure_host.com"); - put("secure_port", "int", "112"); - - put("ftp_host", "string", "ftp.nuukia.com"); - put("ftp_port", "int", "2000"); - put("socks_host", "string", "socks.host.com"); - put("socks_port", "int", "10080"); - put("rtsp_host", "string", "rtsp.voice.com"); - put("rtsp_port", "int", "1554"); - - pc = new Maemo::ProxyConf(); -} - -void Ut_ProxyConf::cleanup() -{ - delete pc; - pc = 0; -} - -void Ut_ProxyConf::initTestCase() -{ -} - -void Ut_ProxyConf::cleanupTestCase() -{ -} - - -void Ut_ProxyConf::proxy_ftp_no_factory_ok_auto() -{ - QList nplist; - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); - - nplist = pc->flush(query); - QVERIFY(nplist.length()==0); -} - - -void Ut_ProxyConf::proxy_ftp_no_factory_ok_manual() -{ - QList nplist; - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); - - put("mode", "string", "manual"); - - nplist = pc->flush(query); - foreach (QNetworkProxy proxy, nplist) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(nplist.length()==3); - QVERIFY(nplist.first().type() == QNetworkProxy::FtpCachingProxy); -} - - -void Ut_ProxyConf::proxy_http_no_factory_ok_manual() -{ - QList nplist; - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); - - put("mode", "string", "manual"); - - nplist = pc->flush(query); - foreach (QNetworkProxy proxy, nplist) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(nplist.length()==3); - QVERIFY(nplist.first().type() == QNetworkProxy::HttpProxy); -} - - -void Ut_ProxyConf::proxy_https_no_factory_ok_manual() -{ - QList nplist; - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("https://maps.google.com/")); - - put("mode", "string", "manual"); - - nplist = pc->flush(query); - foreach (QNetworkProxy proxy, nplist) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(nplist.length()==2); - QVERIFY(nplist.first().type() == QNetworkProxy::HttpProxy); -} - - -void Ut_ProxyConf::proxy_socks_no_factory_ok_manual() -{ - QList nplist; - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); - - put("mode", "string", "manual"); - put_http("host", "string", ""); - - nplist = pc->flush(query); - foreach (QNetworkProxy proxy, nplist) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(nplist.length()==2); - QVERIFY(nplist.first().type() == QNetworkProxy::Socks5Proxy); -} - - -void Ut_ProxyConf::proxy_default_no_factory_ok_manual() -{ - QList nplist; - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("foobar://maps.google.com/")); - - put("mode", "string", "manual"); - put("socks_host", "string", ""); - put("secure_host", "string", ""); - - nplist = pc->flush(query); - foreach (QNetworkProxy proxy, nplist) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(nplist.length()==0); -} - - -void Ut_ProxyConf::proxy_ftp_factory_ok_auto() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); - Maemo::ProxyConf::update(); - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - QVERIFY(listOfProxies.length()==1); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_ftp_factory_ok_manual() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - foreach (QNetworkProxy proxy, listOfProxies) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(listOfProxies.length()==3); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::FtpCachingProxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_http_factory_ok_manual() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - foreach (QNetworkProxy proxy, listOfProxies) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(listOfProxies.length()==3); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_https_factory_ok_manual() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("https://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - foreach (QNetworkProxy proxy, listOfProxies) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(listOfProxies.length()==2); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_socks_factory_ok_manual() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - put_http("host", "string", ""); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - foreach (QNetworkProxy proxy, listOfProxies) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(listOfProxies.length()==2); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::Socks5Proxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_http_factory_ok_manual_clear() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - put_http("host", "string", "192.168.1.1"); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - foreach (QNetworkProxy proxy, listOfProxies) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(listOfProxies.length()==3); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); - - Maemo::ProxyConf::clear(); - listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - QVERIFY(listOfProxies.length()==1); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); -} - - -void Ut_ProxyConf::proxy_default_factory_ok_manual() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("foobar://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - put("socks_host", "string", ""); - put("secure_host", "string", ""); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - QVERIFY(listOfProxies.length()==1); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_http_factory_ok_manual_ignore_list() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://192.168.19.70/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - - QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - - foreach (QNetworkProxy proxy, listOfProxies) { - qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); - } - QVERIFY(listOfProxies.length()==3); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); - - query = QNetworkProxyQuery(QUrl("http://192.168.20.10/")); - listOfProxies = QNetworkProxyFactory::proxyForQuery(query); - QVERIFY(listOfProxies.length()==1); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); - Maemo::ProxyConf::clear(); -} - - -void Ut_ProxyConf::proxy_default_factory_ok_manual_system() -{ - QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); - Maemo::ProxyConf::update(); - - put("mode", "string", "manual"); - - QList listOfProxies = QNetworkProxyFactory::systemProxyForQuery(query); - - QVERIFY(listOfProxies.length()==1); - QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); - Maemo::ProxyConf::clear(); -} - - - - -QTEST_MAIN(Ut_ProxyConf) - -#include "ut_proxyconf.moc" -- cgit v0.12 From ab11576ca4987c7da9fcffb9cab286c1b227b74d Mon Sep 17 00:00:00 2001 From: Aaron McCarthy Date: Thu, 12 Aug 2010 14:49:35 +1000 Subject: Add version 0.42 of libconninet. Minor update. Fixes infinite loops. --- src/3rdparty/libconninet/AUTHORS | 0 src/3rdparty/libconninet/COPYING | 510 ++++++ src/3rdparty/libconninet/ChangeLog | 0 src/3rdparty/libconninet/INSTALL | 229 +++ src/3rdparty/libconninet/NEWS | 0 src/3rdparty/libconninet/README | 0 src/3rdparty/libconninet/autogen.sh | 3 + src/3rdparty/libconninet/config.guess | 1533 ++++++++++++++++++ src/3rdparty/libconninet/config.sub | 1693 ++++++++++++++++++++ src/3rdparty/libconninet/configure.ac | 90 ++ src/3rdparty/libconninet/conninet.pc.in | 11 + src/3rdparty/libconninet/debian/changelog | 293 ++++ src/3rdparty/libconninet/debian/compat | 1 + src/3rdparty/libconninet/debian/control | 39 + src/3rdparty/libconninet/debian/copyright | 19 + .../libconninet/debian/libconninet0-dev.dirs | 2 + .../libconninet/debian/libconninet0-dev.files | 4 + src/3rdparty/libconninet/debian/libconninet0.dirs | 1 + src/3rdparty/libconninet/debian/libconninet0.files | 1 + src/3rdparty/libconninet/debian/rules | 123 ++ src/3rdparty/libconninet/doxygen.cfg.in | 1147 +++++++++++++ src/3rdparty/libconninet/src/dbusdispatcher.cpp | 611 +++++++ src/3rdparty/libconninet/src/dbusdispatcher.h | 91 ++ src/3rdparty/libconninet/src/iapconf.cpp | 299 ++++ src/3rdparty/libconninet/src/iapconf.h | 84 + src/3rdparty/libconninet/src/iapmonitor.cpp | 110 ++ src/3rdparty/libconninet/src/iapmonitor.h | 48 + src/3rdparty/libconninet/src/maemo_icd.cpp | 1316 +++++++++++++++ src/3rdparty/libconninet/src/maemo_icd.h | 182 +++ src/3rdparty/libconninet/src/proxyconf.cpp | 315 ++++ src/3rdparty/libconninet/src/proxyconf.h | 53 + .../libconninet/tests/ut_dbusdispatcher.cpp | 191 +++ src/3rdparty/libconninet/tests/ut_iapconf.cpp | 186 +++ src/3rdparty/libconninet/tests/ut_iapmonitor.cpp | 118 ++ src/3rdparty/libconninet/tests/ut_maemo_icd.cpp | 274 ++++ src/3rdparty/libconninet/tests/ut_proxyconf.cpp | 400 +++++ 36 files changed, 9977 insertions(+) create mode 100644 src/3rdparty/libconninet/AUTHORS create mode 100644 src/3rdparty/libconninet/COPYING create mode 100644 src/3rdparty/libconninet/ChangeLog create mode 100644 src/3rdparty/libconninet/INSTALL create mode 100644 src/3rdparty/libconninet/NEWS create mode 100644 src/3rdparty/libconninet/README create mode 100755 src/3rdparty/libconninet/autogen.sh create mode 100755 src/3rdparty/libconninet/config.guess create mode 100755 src/3rdparty/libconninet/config.sub create mode 100644 src/3rdparty/libconninet/configure.ac create mode 100644 src/3rdparty/libconninet/conninet.pc.in create mode 100644 src/3rdparty/libconninet/debian/changelog create mode 100644 src/3rdparty/libconninet/debian/compat create mode 100644 src/3rdparty/libconninet/debian/control create mode 100644 src/3rdparty/libconninet/debian/copyright create mode 100644 src/3rdparty/libconninet/debian/libconninet0-dev.dirs create mode 100644 src/3rdparty/libconninet/debian/libconninet0-dev.files create mode 100644 src/3rdparty/libconninet/debian/libconninet0.dirs create mode 100644 src/3rdparty/libconninet/debian/libconninet0.files create mode 100755 src/3rdparty/libconninet/debian/rules create mode 100644 src/3rdparty/libconninet/doxygen.cfg.in create mode 100644 src/3rdparty/libconninet/src/dbusdispatcher.cpp create mode 100644 src/3rdparty/libconninet/src/dbusdispatcher.h create mode 100644 src/3rdparty/libconninet/src/iapconf.cpp create mode 100644 src/3rdparty/libconninet/src/iapconf.h create mode 100644 src/3rdparty/libconninet/src/iapmonitor.cpp create mode 100644 src/3rdparty/libconninet/src/iapmonitor.h create mode 100644 src/3rdparty/libconninet/src/maemo_icd.cpp create mode 100644 src/3rdparty/libconninet/src/maemo_icd.h create mode 100644 src/3rdparty/libconninet/src/proxyconf.cpp create mode 100644 src/3rdparty/libconninet/src/proxyconf.h create mode 100644 src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp create mode 100644 src/3rdparty/libconninet/tests/ut_iapconf.cpp create mode 100644 src/3rdparty/libconninet/tests/ut_iapmonitor.cpp create mode 100644 src/3rdparty/libconninet/tests/ut_maemo_icd.cpp create mode 100644 src/3rdparty/libconninet/tests/ut_proxyconf.cpp diff --git a/src/3rdparty/libconninet/AUTHORS b/src/3rdparty/libconninet/AUTHORS new file mode 100644 index 0000000..e69de29 diff --git a/src/3rdparty/libconninet/COPYING b/src/3rdparty/libconninet/COPYING new file mode 100644 index 0000000..b124cf5 --- /dev/null +++ b/src/3rdparty/libconninet/COPYING @@ -0,0 +1,510 @@ + + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations +below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it +becomes a de-facto standard. To achieve this, non-free programs must +be allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control +compilation and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at least + three years, to give the same user the materials specified in + Subsection 6a, above, for a charge no more than the cost of + performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under +any particular circumstance, the balance of the section is intended to +apply, and the section as a whole is intended to apply in other +circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License +may add an explicit geographical distribution limitation excluding those +countries, so that distribution is permitted only in or among +countries not thus excluded. In such case, this License incorporates +the limitation as if written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms +of the ordinary General Public License). + + To apply these terms, attach the following notices to the library. +It is safest to attach them to the start of each source file to most +effectively convey the exclusion of warranty; and each file should +have at least the "copyright" line and a pointer to where the full +notice is found. + + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or +your school, if any, to sign a "copyright disclaimer" for the library, +if necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James + Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! + + diff --git a/src/3rdparty/libconninet/ChangeLog b/src/3rdparty/libconninet/ChangeLog new file mode 100644 index 0000000..e69de29 diff --git a/src/3rdparty/libconninet/INSTALL b/src/3rdparty/libconninet/INSTALL new file mode 100644 index 0000000..54caf7c --- /dev/null +++ b/src/3rdparty/libconninet/INSTALL @@ -0,0 +1,229 @@ +Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002 Free Software +Foundation, Inc. + + This file is free documentation; the Free Software Foundation gives +unlimited permission to copy, distribute and modify it. + +Basic Installation +================== + + These are generic installation instructions. + + The `configure' shell script attempts to guess correct values for +various system-dependent variables used during compilation. It uses +those values to create a `Makefile' in each directory of the package. +It may also create one or more `.h' files containing system-dependent +definitions. Finally, it creates a shell script `config.status' that +you can run in the future to recreate the current configuration, and a +file `config.log' containing compiler output (useful mainly for +debugging `configure'). + + It can also use an optional file (typically called `config.cache' +and enabled with `--cache-file=config.cache' or simply `-C') that saves +the results of its tests to speed up reconfiguring. (Caching is +disabled by default to prevent problems with accidental use of stale +cache files.) + + If you need to do unusual things to compile the package, please try +to figure out how `configure' could check whether to do them, and mail +diffs or instructions to the address given in the `README' so they can +be considered for the next release. If you are using the cache, and at +some point `config.cache' contains results you don't want to keep, you +may remove or edit it. + + The file `configure.ac' (or `configure.in') is used to create +`configure' by a program called `autoconf'. You only need +`configure.ac' if you want to change it or regenerate `configure' using +a newer version of `autoconf'. + +The simplest way to compile this package is: + + 1. `cd' to the directory containing the package's source code and type + `./configure' to configure the package for your system. If you're + using `csh' on an old version of System V, you might need to type + `sh ./configure' instead to prevent `csh' from trying to execute + `configure' itself. + + Running `configure' takes awhile. While running, it prints some + messages telling which features it is checking for. + + 2. Type `make' to compile the package. + + 3. Optionally, type `make check' to run any self-tests that come with + the package. + + 4. Type `make install' to install the programs and any data files and + documentation. + + 5. You can remove the program binaries and object files from the + source code directory by typing `make clean'. To also remove the + files that `configure' created (so you can compile the package for + a different kind of computer), type `make distclean'. There is + also a `make maintainer-clean' target, but that is intended mainly + for the package's developers. If you use it, you may have to get + all sorts of other programs in order to regenerate files that came + with the distribution. + +Compilers and Options +===================== + + Some systems require unusual options for compilation or linking that +the `configure' script does not know about. Run `./configure --help' +for details on some of the pertinent environment variables. + + You can give `configure' initial values for configuration parameters +by setting variables in the command line or in the environment. Here +is an example: + + ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix + + *Note Defining Variables::, for more details. + +Compiling For Multiple Architectures +==================================== + + You can compile the package for more than one kind of computer at the +same time, by placing the object files for each architecture in their +own directory. To do this, you must use a version of `make' that +supports the `VPATH' variable, such as GNU `make'. `cd' to the +directory where you want the object files and executables to go and run +the `configure' script. `configure' automatically checks for the +source code in the directory that `configure' is in and in `..'. + + If you have to use a `make' that does not support the `VPATH' +variable, you have to compile the package for one architecture at a +time in the source code directory. After you have installed the +package for one architecture, use `make distclean' before reconfiguring +for another architecture. + +Installation Names +================== + + By default, `make install' will install the package's files in +`/usr/local/bin', `/usr/local/man', etc. You can specify an +installation prefix other than `/usr/local' by giving `configure' the +option `--prefix=PATH'. + + You can specify separate installation prefixes for +architecture-specific files and architecture-independent files. If you +give `configure' the option `--exec-prefix=PATH', the package will use +PATH as the prefix for installing programs and libraries. +Documentation and other data files will still use the regular prefix. + + In addition, if you use an unusual directory layout you can give +options like `--bindir=PATH' to specify different values for particular +kinds of files. Run `configure --help' for a list of the directories +you can set and what kinds of files go in them. + + If the package supports it, you can cause programs to be installed +with an extra prefix or suffix on their names by giving `configure' the +option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'. + +Optional Features +================= + + Some packages pay attention to `--enable-FEATURE' options to +`configure', where FEATURE indicates an optional part of the package. +They may also pay attention to `--with-PACKAGE' options, where PACKAGE +is something like `gnu-as' or `x' (for the X Window System). The +`README' should mention any `--enable-' and `--with-' options that the +package recognizes. + + For packages that use the X Window System, `configure' can usually +find the X include and library files automatically, but if it doesn't, +you can use the `configure' options `--x-includes=DIR' and +`--x-libraries=DIR' to specify their locations. + +Specifying the System Type +========================== + + There may be some features `configure' cannot figure out +automatically, but needs to determine by the type of machine the package +will run on. Usually, assuming the package is built to be run on the +_same_ architectures, `configure' can figure that out, but if it prints +a message saying it cannot guess the machine type, give it the +`--build=TYPE' option. TYPE can either be a short name for the system +type, such as `sun4', or a canonical name which has the form: + + CPU-COMPANY-SYSTEM + +where SYSTEM can have one of these forms: + + OS KERNEL-OS + + See the file `config.sub' for the possible values of each field. If +`config.sub' isn't included in this package, then this package doesn't +need to know the machine type. + + If you are _building_ compiler tools for cross-compiling, you should +use the `--target=TYPE' option to select the type of system they will +produce code for. + + If you want to _use_ a cross compiler, that generates code for a +platform different from the build platform, you should specify the +"host" platform (i.e., that on which the generated programs will +eventually be run) with `--host=TYPE'. + +Sharing Defaults +================ + + If you want to set default values for `configure' scripts to share, +you can create a site shell script called `config.site' that gives +default values for variables like `CC', `cache_file', and `prefix'. +`configure' looks for `PREFIX/share/config.site' if it exists, then +`PREFIX/etc/config.site' if it exists. Or, you can set the +`CONFIG_SITE' environment variable to the location of the site script. +A warning: not all `configure' scripts look for a site script. + +Defining Variables +================== + + Variables not defined in a site shell script can be set in the +environment passed to `configure'. However, some packages may run +configure again during the build, and the customized values of these +variables may be lost. In order to avoid this problem, you should set +them in the `configure' command line, using `VAR=value'. For example: + + ./configure CC=/usr/local2/bin/gcc + +will cause the specified gcc to be used as the C compiler (unless it is +overridden in the site shell script). + +`configure' Invocation +====================== + + `configure' recognizes the following options to control how it +operates. + +`--help' +`-h' + Print a summary of the options to `configure', and exit. + +`--version' +`-V' + Print the version of Autoconf used to generate the `configure' + script, and exit. + +`--cache-file=FILE' + Enable the cache: use and save the results of the tests in FILE, + traditionally `config.cache'. FILE defaults to `/dev/null' to + disable caching. + +`--config-cache' +`-C' + Alias for `--cache-file=config.cache'. + +`--quiet' +`--silent' +`-q' + Do not print messages saying which checks are being made. To + suppress all normal output, redirect it to `/dev/null' (any error + messages will still be shown). + +`--srcdir=DIR' + Look for the package's source code in directory DIR. Usually + `configure' can determine that directory automatically. + +`configure' also accepts some other, not widely useful, options. Run +`configure --help' for more details. + diff --git a/src/3rdparty/libconninet/NEWS b/src/3rdparty/libconninet/NEWS new file mode 100644 index 0000000..e69de29 diff --git a/src/3rdparty/libconninet/README b/src/3rdparty/libconninet/README new file mode 100644 index 0000000..e69de29 diff --git a/src/3rdparty/libconninet/autogen.sh b/src/3rdparty/libconninet/autogen.sh new file mode 100755 index 0000000..a8fd885 --- /dev/null +++ b/src/3rdparty/libconninet/autogen.sh @@ -0,0 +1,3 @@ +#!/bin/sh + +autoreconf --verbose --install --force diff --git a/src/3rdparty/libconninet/config.guess b/src/3rdparty/libconninet/config.guess new file mode 100755 index 0000000..e3a2116 --- /dev/null +++ b/src/3rdparty/libconninet/config.guess @@ -0,0 +1,1533 @@ +#! /bin/sh +# Attempt to guess a canonical system name. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-06-10' + +# This file is free software; you can redistribute it and/or modify it +# under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Originally written by Per Bothner . +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# This script attempts to guess a canonical system name similar to +# config.sub. If it succeeds, it prints the system name on stdout, and +# exits with 0. Otherwise, it exits with 1. +# +# The plan is that this can be called by configure scripts if you +# don't specify an explicit build system type. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] + +Output the configuration name of the system \`$me' is run on. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.guess ($timestamp) + +Originally written by Per Bothner. +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" >&2 + exit 1 ;; + * ) + break ;; + esac +done + +if test $# != 0; then + echo "$me: too many arguments$help" >&2 + exit 1 +fi + +trap 'exit 1' 1 2 15 + +# CC_FOR_BUILD -- compiler used by this script. Note that the use of a +# compiler to aid in system detection is discouraged as it requires +# temporary files to be created and, as you can see below, it is a +# headache to deal with in a portable fashion. + +# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still +# use `HOST_CC' if defined, but it is deprecated. + +# Portable tmp directory creation inspired by the Autoconf team. + +set_cc_for_build=' +trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; +trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; +: ${TMPDIR=/tmp} ; + { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || + { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || + { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || + { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; +dummy=$tmp/dummy ; +tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; +case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int x;" > $dummy.c ; + for c in cc gcc c89 c99 ; do + if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + if test x"$CC_FOR_BUILD" = x ; then + CC_FOR_BUILD=no_compiler_found ; + fi + ;; + ,,*) CC_FOR_BUILD=$CC ;; + ,*,*) CC_FOR_BUILD=$HOST_CC ;; +esac ; set_cc_for_build= ;' + +# This is needed to find uname on a Pyramid OSx when run in the BSD universe. +# (ghazi@noc.rutgers.edu 1994-08-24) +if (test -f /.attbin/uname) >/dev/null 2>&1 ; then + PATH=$PATH:/.attbin ; export PATH +fi + +UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown +UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown +UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown +UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown + +# Note: order is significant - the case branches are not exclusive. + +case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in + *:NetBSD:*:*) + # NetBSD (nbsd) targets should (where applicable) match one or + # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, + # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently + # switched to ELF, *-*-netbsd* would select the old + # object file format. This provides both forward + # compatibility and a consistent mechanism for selecting the + # object file format. + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + armeb) machine=armeb-unknown ;; + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + sh5el) machine=sh5le-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; + esac + # The Operating System including object format, if it has switched + # to ELF recently, or will in the future. + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build + if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ELF__ + then + # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). + # Return netbsd for either. FIX? + os=netbsd + else + os=netbsdelf + fi + ;; + *) + os=netbsd + ;; + esac + # The OS release + # Debian GNU/NetBSD machines have a different userland, and + # thus, need a distinct triplet. However, they do not need + # kernel version information, so it can be replaced with a + # suitable tag, in the style of linux-gnu. + case "${UNAME_VERSION}" in + Debian*) + release='-gnu' + ;; + *) + release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` + ;; + esac + # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: + # contains redundant information, the shorter form: + # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. + echo "${machine}-${os}${release}" + exit ;; + *:OpenBSD:*:*) + UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` + echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} + exit ;; + *:ekkoBSD:*:*) + echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} + exit ;; + *:SolidBSD:*:*) + echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} + exit ;; + macppc:MirBSD:*:*) + echo powerpc-unknown-mirbsd${UNAME_RELEASE} + exit ;; + *:MirBSD:*:*) + echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} + exit ;; + alpha:OSF1:*:*) + case $UNAME_RELEASE in + *4.0) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` + ;; + *5.*) + UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` + ;; + esac + # According to Compaq, /usr/sbin/psrinfo has been available on + # OSF/1 and Tru64 systems produced since 1995. I hope that + # covers most systems running today. This code pipes the CPU + # types through head -n 1, so we only detect the type of CPU 0. + ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` + case "$ALPHA_CPU_TYPE" in + "EV4 (21064)") + UNAME_MACHINE="alpha" ;; + "EV4.5 (21064)") + UNAME_MACHINE="alpha" ;; + "LCA4 (21066/21068)") + UNAME_MACHINE="alpha" ;; + "EV5 (21164)") + UNAME_MACHINE="alphaev5" ;; + "EV5.6 (21164A)") + UNAME_MACHINE="alphaev56" ;; + "EV5.6 (21164PC)") + UNAME_MACHINE="alphapca56" ;; + "EV5.7 (21164PC)") + UNAME_MACHINE="alphapca57" ;; + "EV6 (21264)") + UNAME_MACHINE="alphaev6" ;; + "EV6.7 (21264A)") + UNAME_MACHINE="alphaev67" ;; + "EV6.8CB (21264C)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8AL (21264B)") + UNAME_MACHINE="alphaev68" ;; + "EV6.8CX (21264D)") + UNAME_MACHINE="alphaev68" ;; + "EV6.9A (21264/EV69A)") + UNAME_MACHINE="alphaev69" ;; + "EV7 (21364)") + UNAME_MACHINE="alphaev7" ;; + "EV7.9 (21364A)") + UNAME_MACHINE="alphaev79" ;; + esac + # A Pn.n version is a patched version. + # A Vn.n version is a released version. + # A Tn.n version is a released field test version. + # A Xn.n version is an unreleased experimental baselevel. + # 1.2 uses "1.2" for uname -r. + echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + exit ;; + Alpha\ *:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # Should we change UNAME_MACHINE based on the output of uname instead + # of the specific Alpha model? + echo alpha-pc-interix + exit ;; + 21064:Windows_NT:50:3) + echo alpha-dec-winnt3.5 + exit ;; + Amiga*:UNIX_System_V:4.0:*) + echo m68k-unknown-sysv4 + exit ;; + *:[Aa]miga[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-amigaos + exit ;; + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos + exit ;; + *:OS/390:*:*) + echo i370-ibm-openedition + exit ;; + *:z/VM:*:*) + echo s390-ibm-zvmoe + exit ;; + *:OS400:*:*) + echo powerpc-ibm-os400 + exit ;; + arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) + echo arm-acorn-riscix${UNAME_RELEASE} + exit ;; + arm:riscos:*:*|arm:RISCOS:*:*) + echo arm-unknown-riscos + exit ;; + SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) + echo hppa1.1-hitachi-hiuxmpp + exit ;; + Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) + # akee@wpdis03.wpafb.af.mil (Earle F. Ake) contributed MIS and NILE. + if test "`(/bin/universe) 2>/dev/null`" = att ; then + echo pyramid-pyramid-sysv3 + else + echo pyramid-pyramid-bsd + fi + exit ;; + NILE*:*:*:dcosx) + echo pyramid-pyramid-svr4 + exit ;; + DRS?6000:unix:4.0:6*) + echo sparc-icl-nx6 + exit ;; + DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) + case `/usr/bin/uname -p` in + sparc) echo sparc-icl-nx7; exit ;; + esac ;; + s390x:SunOS:*:*) + echo ${UNAME_MACHINE}-ibm-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4H:SunOS:5.*:*) + echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) + echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + i86pc:SunOS:5.*:* | i86xen:SunOS:5.*:*) + eval $set_cc_for_build + SUN_ARCH="i386" + # If there is a compiler, see if it is configured for 64-bit objects. + # Note that the Sun cc does not turn __LP64__ into 1 like gcc does. + # This test works for both compilers. + if [ "$CC_FOR_BUILD" != 'no_compiler_found' ]; then + if (echo '#ifdef __amd64'; echo IS_64BIT_ARCH; echo '#endif') | \ + (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | \ + grep IS_64BIT_ARCH >/dev/null + then + SUN_ARCH="x86_64" + fi + fi + echo ${SUN_ARCH}-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:6*:*) + # According to config.sub, this is the proper way to canonicalize + # SunOS6. Hard to guess exactly what SunOS6 will be like, but + # it's likely to be more like Solaris than SunOS4. + echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + sun4*:SunOS:*:*) + case "`/usr/bin/arch -k`" in + Series*|S4*) + UNAME_RELEASE=`uname -v` + ;; + esac + # Japanese Language versions have a version number like `4.1.3-JL'. + echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` + exit ;; + sun3*:SunOS:*:*) + echo m68k-sun-sunos${UNAME_RELEASE} + exit ;; + sun*:*:4.2BSD:*) + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 + case "`/bin/arch`" in + sun3) + echo m68k-sun-sunos${UNAME_RELEASE} + ;; + sun4) + echo sparc-sun-sunos${UNAME_RELEASE} + ;; + esac + exit ;; + aushp:SunOS:*:*) + echo sparc-auspex-sunos${UNAME_RELEASE} + exit ;; + # The situation for MiNT is a little confusing. The machine name + # can be virtually everything (everything which is not + # "atarist" or "atariste" at least should have a processor + # > m68000). The system name ranges from "MiNT" over "FreeMiNT" + # to the lowercase version "mint" (or "freemint"). Finally + # the system name "TOS" denotes a system which is actually not + # MiNT. But MiNT is downward compatible to TOS, so this should + # be no problem. + atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) + echo m68k-atari-mint${UNAME_RELEASE} + exit ;; + milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) + echo m68k-milan-mint${UNAME_RELEASE} + exit ;; + hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) + echo m68k-hades-mint${UNAME_RELEASE} + exit ;; + *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) + echo m68k-unknown-mint${UNAME_RELEASE} + exit ;; + m68k:machten:*:*) + echo m68k-apple-machten${UNAME_RELEASE} + exit ;; + powerpc:machten:*:*) + echo powerpc-apple-machten${UNAME_RELEASE} + exit ;; + RISC*:Mach:*:*) + echo mips-dec-mach_bsd4.3 + exit ;; + RISC*:ULTRIX:*:*) + echo mips-dec-ultrix${UNAME_RELEASE} + exit ;; + VAX*:ULTRIX*:*:*) + echo vax-dec-ultrix${UNAME_RELEASE} + exit ;; + 2020:CLIX:*:* | 2430:CLIX:*:*) + echo clipper-intergraph-clix${UNAME_RELEASE} + exit ;; + mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c +#ifdef __cplusplus +#include /* for printf() prototype */ + int main (int argc, char *argv[]) { +#else + int main (argc, argv) int argc; char *argv[]; { +#endif + #if defined (host_mips) && defined (MIPSEB) + #if defined (SYSTYPE_SYSV) + printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_SVR4) + printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); + #endif + #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) + printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); + #endif + #endif + exit (-1); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && + dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && + SYSTEM_NAME=`$dummy $dummyarg` && + { echo "$SYSTEM_NAME"; exit; } + echo mips-mips-riscos${UNAME_RELEASE} + exit ;; + Motorola:PowerMAX_OS:*:*) + echo powerpc-motorola-powermax + exit ;; + Motorola:*:4.3:PL8-*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) + echo powerpc-harris-powermax + exit ;; + Night_Hawk:Power_UNIX:*:*) + echo powerpc-harris-powerunix + exit ;; + m88k:CX/UX:7*:*) + echo m88k-harris-cxux7 + exit ;; + m88k:*:4*:R4*) + echo m88k-motorola-sysv4 + exit ;; + m88k:*:3*:R3*) + echo m88k-motorola-sysv3 + exit ;; + AViiON:dgux:*:*) + # DG/UX returns AViiON for all architectures + UNAME_PROCESSOR=`/usr/bin/uname -p` + if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] + then + if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ + [ ${TARGET_BINARY_INTERFACE}x = x ] + then + echo m88k-dg-dgux${UNAME_RELEASE} + else + echo m88k-dg-dguxbcs${UNAME_RELEASE} + fi + else + echo i586-dg-dgux${UNAME_RELEASE} + fi + exit ;; + M88*:DolphinOS:*:*) # DolphinOS (SVR3) + echo m88k-dolphin-sysv3 + exit ;; + M88*:*:R3*:*) + # Delta 88k system running SVR3 + echo m88k-motorola-sysv3 + exit ;; + XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) + echo m88k-tektronix-sysv3 + exit ;; + Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) + echo m68k-tektronix-bsd + exit ;; + *:IRIX*:*:*) + echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` + exit ;; + ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. + echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id + exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' + i*86:AIX:*:*) + echo i386-ibm-aix + exit ;; + ia64:AIX:*:*) + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} + exit ;; + *:AIX:2:3) + if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + + main() + { + if (!__power_pc()) + exit(1); + puts("powerpc-ibm-aix3.2.5"); + exit(0); + } +EOF + if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` + then + echo "$SYSTEM_NAME" + else + echo rs6000-ibm-aix3.2.5 + fi + elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then + echo rs6000-ibm-aix3.2.4 + else + echo rs6000-ibm-aix3.2 + fi + exit ;; + *:AIX:*:[456]) + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` + if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then + IBM_ARCH=rs6000 + else + IBM_ARCH=powerpc + fi + if [ -x /usr/bin/oslevel ] ; then + IBM_REV=`/usr/bin/oslevel` + else + IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} + fi + echo ${IBM_ARCH}-ibm-aix${IBM_REV} + exit ;; + *:AIX:*:*) + echo rs6000-ibm-aix + exit ;; + ibmrt:4.4BSD:*|romp-ibm:BSD:*) + echo romp-ibm-bsd4.4 + exit ;; + ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and + echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to + exit ;; # report: romp-ibm BSD 4.3 + *:BOSX:*:*) + echo rs6000-bull-bosx + exit ;; + DPX/2?00:B.O.S.:*:*) + echo m68k-bull-sysv3 + exit ;; + 9000/[34]??:4.3bsd:1.*:*) + echo m68k-hp-bsd + exit ;; + hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) + echo m68k-hp-bsd4.4 + exit ;; + 9000/[34678]??:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + case "${UNAME_MACHINE}" in + 9000/31? ) HP_ARCH=m68000 ;; + 9000/[34]?? ) HP_ARCH=m68k ;; + 9000/[678][0-9][0-9]) + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` + case "${sc_cpu_version}" in + 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 + 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 + 532) # CPU_PA_RISC2_0 + case "${sc_kernel_bits}" in + 32) HP_ARCH="hppa2.0n" ;; + 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 + esac ;; + esac + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + + #define _HPUX_SOURCE + #include + #include + + int main () + { + #if defined(_SC_KERNEL_BITS) + long bits = sysconf(_SC_KERNEL_BITS); + #endif + long cpu = sysconf (_SC_CPU_VERSION); + + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1"); break; + case CPU_PA_RISC2_0: + #if defined(_SC_KERNEL_BITS) + switch (bits) + { + case 64: puts ("hppa2.0w"); break; + case 32: puts ("hppa2.0n"); break; + default: puts ("hppa2.0"); break; + } break; + #else /* !defined(_SC_KERNEL_BITS) */ + puts ("hppa2.0"); break; + #endif + default: puts ("hppa1.0"); break; + } + exit (0); + } +EOF + (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` + test -z "$HP_ARCH" && HP_ARCH=hppa + fi ;; + esac + if [ ${HP_ARCH} = "hppa2.0w" ] + then + eval $set_cc_for_build + + # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating + # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler + # generating 64-bit code. GNU and HP use different nomenclature: + # + # $ CC_FOR_BUILD=cc ./config.guess + # => hppa2.0w-hp-hpux11.23 + # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess + # => hppa64-hp-hpux11.23 + + if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | + grep -q __LP64__ + then + HP_ARCH="hppa2.0w" + else + HP_ARCH="hppa64" + fi + fi + echo ${HP_ARCH}-hp-hpux${HPUX_REV} + exit ;; + ia64:HP-UX:*:*) + HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` + echo ia64-hp-hpux${HPUX_REV} + exit ;; + 3050*:HI-UX:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + int + main () + { + long cpu = sysconf (_SC_CPU_VERSION); + /* The order matters, because CPU_IS_HP_MC68K erroneously returns + true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct + results, however. */ + if (CPU_IS_PA_RISC (cpu)) + { + switch (cpu) + { + case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; + case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; + case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; + default: puts ("hppa-hitachi-hiuxwe2"); break; + } + } + else if (CPU_IS_HP_MC68K (cpu)) + puts ("m68k-hitachi-hiuxwe2"); + else puts ("unknown-hitachi-hiuxwe2"); + exit (0); + } +EOF + $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + echo unknown-hitachi-hiuxwe2 + exit ;; + 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) + echo hppa1.1-hp-bsd + exit ;; + 9000/8??:4.3bsd:*:*) + echo hppa1.0-hp-bsd + exit ;; + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) + echo hppa1.0-hp-mpeix + exit ;; + hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) + echo hppa1.1-hp-osf + exit ;; + hp8??:OSF1:*:*) + echo hppa1.0-hp-osf + exit ;; + i*86:OSF1:*:*) + if [ -x /usr/sbin/sysversion ] ; then + echo ${UNAME_MACHINE}-unknown-osf1mk + else + echo ${UNAME_MACHINE}-unknown-osf1 + fi + exit ;; + parisc*:Lites*:*:*) + echo hppa1.1-hp-lites + exit ;; + C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) + echo c1-convex-bsd + exit ;; + C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) + echo c34-convex-bsd + exit ;; + C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) + echo c38-convex-bsd + exit ;; + C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) + echo c4-convex-bsd + exit ;; + CRAY*Y-MP:*:*:*) + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*[A-Z]90:*:*:*) + echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ + | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*TS:*:*:*) + echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*T3E:*:*:*) + echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + CRAY*SV1:*:*:*) + echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + *:UNICOS/mp:*:*) + echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' + exit ;; + F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) + FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` + echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + 5000:UNIX_System_V:4.*:*) + FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` + FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` + echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" + exit ;; + i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) + echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} + exit ;; + sparc*:BSD/OS:*:*) + echo sparc-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:BSD/OS:*:*) + echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} + exit ;; + *:FreeBSD:*:*) + case ${UNAME_MACHINE} in + pc98) + echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + amd64) + echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + *) + echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; + esac + exit ;; + i*:CYGWIN*:*) + echo ${UNAME_MACHINE}-pc-cygwin + exit ;; + *:MINGW*:*) + echo ${UNAME_MACHINE}-pc-mingw32 + exit ;; + i*:windows32*:*) + # uname -m includes "-pc" on this system. + echo ${UNAME_MACHINE}-mingw32 + exit ;; + i*:PW*:*) + echo ${UNAME_MACHINE}-pc-pw32 + exit ;; + *:Interix*:[3456]*) + case ${UNAME_MACHINE} in + x86) + echo i586-pc-interix${UNAME_RELEASE} + exit ;; + EM64T | authenticamd | genuineintel) + echo x86_64-unknown-interix${UNAME_RELEASE} + exit ;; + IA64) + echo ia64-unknown-interix${UNAME_RELEASE} + exit ;; + esac ;; + [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) + echo i${UNAME_MACHINE}-pc-mks + exit ;; + 8664:Windows_NT:*) + echo x86_64-pc-mks + exit ;; + i*:Windows_NT*:* | Pentium*:Windows_NT*:*) + # How do we know it's Interix rather than the generic POSIX subsystem? + # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we + # UNAME_MACHINE based on the output of uname instead of i386? + echo i586-pc-interix + exit ;; + i*:UWIN*:*) + echo ${UNAME_MACHINE}-pc-uwin + exit ;; + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) + echo x86_64-unknown-cygwin + exit ;; + p*:CYGWIN*:*) + echo powerpcle-unknown-cygwin + exit ;; + prep*:SunOS:5.*:*) + echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` + exit ;; + *:GNU:*:*) + # the GNU system + echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` + exit ;; + *:GNU/*:*:*) + # other systems with GNU libc and userland + echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu + exit ;; + i*86:Minix:*:*) + echo ${UNAME_MACHINE}-pc-minix + exit ;; + arm*:Linux:*:*) + eval $set_cc_for_build + if echo __ARM_EABI__ | $CC_FOR_BUILD -E - 2>/dev/null \ + | grep -q __ARM_EABI__ + then + echo ${UNAME_MACHINE}-unknown-linux-gnu + else + echo ${UNAME_MACHINE}-unknown-linux-gnueabi + fi + exit ;; + avr32*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + cris:Linux:*:*) + echo cris-axis-linux-gnu + exit ;; + crisv32:Linux:*:*) + echo crisv32-axis-linux-gnu + exit ;; + frv:Linux:*:*) + echo frv-unknown-linux-gnu + exit ;; + ia64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m32r*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + m68*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + mips:Linux:*:* | mips64:Linux:*:*) + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef ${UNAME_MACHINE} + #undef ${UNAME_MACHINE}el + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=${UNAME_MACHINE}el + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=${UNAME_MACHINE} + #else + CPU= + #endif + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^CPU/{ + s: ::g + p + }'`" + test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } + ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; + ppc:Linux:*:*) + echo powerpc-unknown-linux-gnu + exit ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu + exit ;; + alpha:Linux:*:*) + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep -q ld.so.1 + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi + echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} + exit ;; + padre:Linux:*:*) + echo sparc-unknown-linux-gnu + exit ;; + parisc:Linux:*:* | hppa:Linux:*:*) + # Look for CPU level + case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in + PA7*) echo hppa1.1-unknown-linux-gnu ;; + PA8*) echo hppa2.0-unknown-linux-gnu ;; + *) echo hppa-unknown-linux-gnu ;; + esac + exit ;; + parisc64:Linux:*:* | hppa64:Linux:*:*) + echo hppa64-unknown-linux-gnu + exit ;; + s390:Linux:*:* | s390x:Linux:*:*) + echo ${UNAME_MACHINE}-ibm-linux + exit ;; + sh64*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sh*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + sparc:Linux:*:* | sparc64:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + vax:Linux:*:*) + echo ${UNAME_MACHINE}-dec-linux-gnu + exit ;; + x86_64:Linux:*:*) + echo x86_64-unknown-linux-gnu + exit ;; + xtensa*:Linux:*:*) + echo ${UNAME_MACHINE}-unknown-linux-gnu + exit ;; + i*86:Linux:*:*) + # The BFD linker knows what the default object file format is, so + # first see if it will tell us. cd to the root directory to prevent + # problems with other programs or directories called `ld' in the path. + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ + | sed -ne '/supported targets:/!d + s/[ ][ ]*/ /g + s/.*supported targets: *// + s/ .*// + p'` + case "$ld_supported_targets" in + elf32-i386) + TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" + ;; + esac + # Determine whether the default compiler is a.out or elf + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif + #ifdef __dietlibc__ + LIBC=dietlibc + #endif +EOF + eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' + /^LIBC/{ + s: ::g + p + }'`" + test x"${LIBC}" != x && { + echo "${UNAME_MACHINE}-pc-linux-${LIBC}" + exit + } + test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } + ;; + i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. + echo i386-sequent-sysv4 + exit ;; + i*86:UNIX_SV:4.2MP:2.*) + # Unixware is an offshoot of SVR4, but it has its own version + # number series starting with 2... + # I am not positive that other SVR4 systems won't match this, + # I just have to hope. -- rms. + # Use sysv4.2uw... so that sysv4* matches it. + echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} + exit ;; + i*86:OS/2:*:*) + # If we were able to find `uname', then EMX Unix compatibility + # is probably installed. + echo ${UNAME_MACHINE}-pc-os2-emx + exit ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit ;; + i*86:syllable:*:*) + echo ${UNAME_MACHINE}-pc-syllable + exit ;; + i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.[02]*:*) + echo i386-unknown-lynxos${UNAME_RELEASE} + exit ;; + i*86:*DOS:*:*) + echo ${UNAME_MACHINE}-pc-msdosdjgpp + exit ;; + i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) + UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` + if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then + echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} + else + echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} + fi + exit ;; + i*86:*:5:[678]*) + # UnixWare 7.x, OpenUNIX and OpenServer 6. + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} + exit ;; + i*86:*:3.2:*) + if test -f /usr/options/cb.name; then + UNAME_REL=`sed -n 's/.*Version //p' /dev/null >/dev/null ; then + UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` + (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 + (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ + && UNAME_MACHINE=i586 + (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ + && UNAME_MACHINE=i686 + (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ + && UNAME_MACHINE=i686 + echo ${UNAME_MACHINE}-pc-sco$UNAME_REL + else + echo ${UNAME_MACHINE}-pc-sysv32 + fi + exit ;; + pc:*:*:*) + # Left here for compatibility: + # uname -m prints for DJGPP always 'pc', but it prints nothing about + # the processor, so we play safe by assuming i586. + # Note: whatever this is, it MUST be the same as what config.sub + # prints for the "djgpp" host, or else GDB configury will decide that + # this is a cross-build. + echo i586-pc-msdosdjgpp + exit ;; + Intel:Mach:3*:*) + echo i386-pc-mach3 + exit ;; + paragon:*:*:*) + echo i860-intel-osf1 + exit ;; + i860:*:4.*:*) # i860-SVR4 + if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then + echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 + else # Add other i860-SVR4 vendors below as they are discovered. + echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 + fi + exit ;; + mini*:CTIX:SYS*5:*) + # "miniframe" + echo m68010-convergent-sysv + exit ;; + mc68k:UNIX:SYSTEM5:3.51m) + echo m68k-convergent-sysv + exit ;; + M680?0:D-NIX:5.3:*) + echo m68k-diab-dnix + exit ;; + M68*:*:R3V[5678]*:*) + test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; + 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) + OS_REL='' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4; exit; } ;; + NCR*:*:4.2:* | MPRAS*:*:4.2:*) + OS_REL='.3' + test -r /etc/.relid \ + && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` + /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ + && { echo i486-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } + /bin/uname -p 2>/dev/null | /bin/grep pteron >/dev/null \ + && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; + m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) + echo m68k-unknown-lynxos${UNAME_RELEASE} + exit ;; + mc68030:UNIX_System_V:4.*:*) + echo m68k-atari-sysv4 + exit ;; + TSUNAMI:LynxOS:2.*:*) + echo sparc-unknown-lynxos${UNAME_RELEASE} + exit ;; + rs6000:LynxOS:2.*:*) + echo rs6000-unknown-lynxos${UNAME_RELEASE} + exit ;; + PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.[02]*:*) + echo powerpc-unknown-lynxos${UNAME_RELEASE} + exit ;; + SM[BE]S:UNIX_SV:*:*) + echo mips-dde-sysv${UNAME_RELEASE} + exit ;; + RM*:ReliantUNIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + RM*:SINIX-*:*:*) + echo mips-sni-sysv4 + exit ;; + *:SINIX-*:*:*) + if uname -p 2>/dev/null >/dev/null ; then + UNAME_MACHINE=`(uname -p) 2>/dev/null` + echo ${UNAME_MACHINE}-sni-sysv4 + else + echo ns32k-sni-sysv + fi + exit ;; + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says + echo i586-unisys-sysv4 + exit ;; + *:UNIX_System_V:4*:FTX*) + # From Gerald Hewes . + # How about differentiating between stratus architectures? -djm + echo hppa1.1-stratus-sysv4 + exit ;; + *:*:*:FTX*) + # From seanf@swdc.stratus.com. + echo i860-stratus-sysv4 + exit ;; + i*86:VOS:*:*) + # From Paul.Green@stratus.com. + echo ${UNAME_MACHINE}-stratus-vos + exit ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit ;; + mc68*:A/UX:*:*) + echo m68k-apple-aux${UNAME_RELEASE} + exit ;; + news*:NEWS-OS:6*:*) + echo mips-sony-newsos6 + exit ;; + R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) + if [ -d /usr/nec ]; then + echo mips-nec-sysv${UNAME_RELEASE} + else + echo mips-unknown-sysv${UNAME_RELEASE} + fi + exit ;; + BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. + echo powerpc-be-beos + exit ;; + BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. + echo powerpc-apple-beos + exit ;; + BePC:BeOS:*:*) # BeOS running on Intel PC compatible. + echo i586-pc-beos + exit ;; + BePC:Haiku:*:*) # Haiku running on Intel PC compatible. + echo i586-pc-haiku + exit ;; + SX-4:SUPER-UX:*:*) + echo sx4-nec-superux${UNAME_RELEASE} + exit ;; + SX-5:SUPER-UX:*:*) + echo sx5-nec-superux${UNAME_RELEASE} + exit ;; + SX-6:SUPER-UX:*:*) + echo sx6-nec-superux${UNAME_RELEASE} + exit ;; + SX-7:SUPER-UX:*:*) + echo sx7-nec-superux${UNAME_RELEASE} + exit ;; + SX-8:SUPER-UX:*:*) + echo sx8-nec-superux${UNAME_RELEASE} + exit ;; + SX-8R:SUPER-UX:*:*) + echo sx8r-nec-superux${UNAME_RELEASE} + exit ;; + Power*:Rhapsody:*:*) + echo powerpc-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Rhapsody:*:*) + echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} + exit ;; + *:Darwin:*:*) + UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown + case $UNAME_PROCESSOR in + unknown) UNAME_PROCESSOR=powerpc ;; + esac + echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} + exit ;; + *:procnto*:*:* | *:QNX:[0123456789]*:*) + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 + UNAME_MACHINE=pc + fi + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} + exit ;; + *:QNX:*:4*) + echo i386-pc-qnx + exit ;; + NSE-?:NONSTOP_KERNEL:*:*) + echo nse-tandem-nsk${UNAME_RELEASE} + exit ;; + NSR-?:NONSTOP_KERNEL:*:*) + echo nsr-tandem-nsk${UNAME_RELEASE} + exit ;; + *:NonStop-UX:*:*) + echo mips-compaq-nonstopux + exit ;; + BS2000:POSIX*:*:*) + echo bs2000-siemens-sysv + exit ;; + DS/*:UNIX_System_V:*:*) + echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} + exit ;; + *:Plan9:*:*) + # "uname -m" is not consistent, so use $cputype instead. 386 + # is converted to i386 for consistency with other x86 + # operating systems. + if test "$cputype" = "386"; then + UNAME_MACHINE=i386 + else + UNAME_MACHINE="$cputype" + fi + echo ${UNAME_MACHINE}-unknown-plan9 + exit ;; + *:TOPS-10:*:*) + echo pdp10-unknown-tops10 + exit ;; + *:TENEX:*:*) + echo pdp10-unknown-tenex + exit ;; + KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) + echo pdp10-dec-tops20 + exit ;; + XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) + echo pdp10-xkl-tops20 + exit ;; + *:TOPS-20:*:*) + echo pdp10-unknown-tops20 + exit ;; + *:ITS:*:*) + echo pdp10-unknown-its + exit ;; + SEI:*:*:SEIUX) + echo mips-sei-seiux${UNAME_RELEASE} + exit ;; + *:DragonFly:*:*) + echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` + exit ;; + *:*VMS:*:*) + UNAME_MACHINE=`(uname -p) 2>/dev/null` + case "${UNAME_MACHINE}" in + A*) echo alpha-dec-vms ; exit ;; + I*) echo ia64-dec-vms ; exit ;; + V*) echo vax-dec-vms ; exit ;; + esac ;; + *:XENIX:*:SysV) + echo i386-pc-xenix + exit ;; + i*86:skyos:*:*) + echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' + exit ;; + i*86:rdos:*:*) + echo ${UNAME_MACHINE}-pc-rdos + exit ;; + i*86:AROS:*:*) + echo ${UNAME_MACHINE}-pc-aros + exit ;; +esac + +#echo '(No uname command or uname output not recognized.)' 1>&2 +#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 + +eval $set_cc_for_build +cat >$dummy.c < +# include +#endif +main () +{ +#if defined (sony) +#if defined (MIPSEB) + /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, + I don't know.... */ + printf ("mips-sony-bsd\n"); exit (0); +#else +#include + printf ("m68k-sony-newsos%s\n", +#ifdef NEWSOS4 + "4" +#else + "" +#endif + ); exit (0); +#endif +#endif + +#if defined (__arm) && defined (__acorn) && defined (__unix) + printf ("arm-acorn-riscix\n"); exit (0); +#endif + +#if defined (hp300) && !defined (hpux) + printf ("m68k-hp-bsd\n"); exit (0); +#endif + +#if defined (NeXT) +#if !defined (__ARCHITECTURE__) +#define __ARCHITECTURE__ "m68k" +#endif + int version; + version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; + if (version < 4) + printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); + else + printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); + exit (0); +#endif + +#if defined (MULTIMAX) || defined (n16) +#if defined (UMAXV) + printf ("ns32k-encore-sysv\n"); exit (0); +#else +#if defined (CMU) + printf ("ns32k-encore-mach\n"); exit (0); +#else + printf ("ns32k-encore-bsd\n"); exit (0); +#endif +#endif +#endif + +#if defined (__386BSD__) + printf ("i386-pc-bsd\n"); exit (0); +#endif + +#if defined (sequent) +#if defined (i386) + printf ("i386-sequent-dynix\n"); exit (0); +#endif +#if defined (ns32000) + printf ("ns32k-sequent-dynix\n"); exit (0); +#endif +#endif + +#if defined (_SEQUENT_) + struct utsname un; + + uname(&un); + + if (strncmp(un.version, "V2", 2) == 0) { + printf ("i386-sequent-ptx2\n"); exit (0); + } + if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ + printf ("i386-sequent-ptx1\n"); exit (0); + } + printf ("i386-sequent-ptx\n"); exit (0); + +#endif + +#if defined (vax) +# if !defined (ultrix) +# include +# if defined (BSD) +# if BSD == 43 + printf ("vax-dec-bsd4.3\n"); exit (0); +# else +# if BSD == 199006 + printf ("vax-dec-bsd4.3reno\n"); exit (0); +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# endif +# else + printf ("vax-dec-bsd\n"); exit (0); +# endif +# else + printf ("vax-dec-ultrix\n"); exit (0); +# endif +#endif + +#if defined (alliant) && defined (i860) + printf ("i860-alliant-bsd\n"); exit (0); +#endif + + exit (1); +} +EOF + +$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && + { echo "$SYSTEM_NAME"; exit; } + +# Apollos put the system type in the environment. + +test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } + +# Convex versions that predate uname can use getsysinfo(1) + +if [ -x /usr/convex/getsysinfo ] +then + case `getsysinfo -f cpu_type` in + c1*) + echo c1-convex-bsd + exit ;; + c2*) + if getsysinfo -f scalar_acc + then echo c32-convex-bsd + else echo c2-convex-bsd + fi + exit ;; + c34*) + echo c34-convex-bsd + exit ;; + c38*) + echo c38-convex-bsd + exit ;; + c4*) + echo c4-convex-bsd + exit ;; + esac +fi + +cat >&2 < in order to provide the needed +information to handle your system. + +config.guess timestamp = $timestamp + +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null` + +hostinfo = `(hostinfo) 2>/dev/null` +/bin/universe = `(/bin/universe) 2>/dev/null` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` +/bin/arch = `(/bin/arch) 2>/dev/null` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` + +UNAME_MACHINE = ${UNAME_MACHINE} +UNAME_RELEASE = ${UNAME_RELEASE} +UNAME_SYSTEM = ${UNAME_SYSTEM} +UNAME_VERSION = ${UNAME_VERSION} +EOF + +exit 1 + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/3rdparty/libconninet/config.sub b/src/3rdparty/libconninet/config.sub new file mode 100755 index 0000000..eb0389a --- /dev/null +++ b/src/3rdparty/libconninet/config.sub @@ -0,0 +1,1693 @@ +#! /bin/sh +# Configuration validation subroutine script. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009 +# Free Software Foundation, Inc. + +timestamp='2009-06-11' + +# This file is (in principle) common to ALL GNU software. +# The presence of a machine in this file suggests that SOME GNU software +# can handle that machine. It does not imply ALL GNU software can. +# +# This file is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA +# 02110-1301, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + + +# Please send patches to . Submit a context +# diff and a properly formatted ChangeLog entry. +# +# Configuration subroutine to validate and canonicalize a configuration type. +# Supply the specified configuration type as an argument. +# If it is invalid, we print an error message on stderr and exit with code 1. +# Otherwise, we print the canonical config type on stdout and succeed. + +# This file is supposed to be the same for all GNU packages +# and recognize all the CPU types, system types and aliases +# that are meaningful with *any* GNU software. +# Each package is responsible for reporting which valid configurations +# it does not support. The user should be able to distinguish +# a failure to support a valid configuration from a meaningless +# configuration. + +# The goal of this file is to map all the various variations of a given +# machine specification into a single specification in the form: +# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM +# or in some cases, the newer four-part form: +# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM +# It is wrong to echo any other type of specification. + +me=`echo "$0" | sed -e 's,.*/,,'` + +usage="\ +Usage: $0 [OPTION] CPU-MFR-OPSYS + $0 [OPTION] ALIAS + +Canonicalize a configuration name. + +Operation modes: + -h, --help print this help, then exit + -t, --time-stamp print date of last modification, then exit + -v, --version print version number, then exit + +Report bugs and patches to ." + +version="\ +GNU config.sub ($timestamp) + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. + +This is free software; see the source for copying conditions. There is NO +warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." + +help=" +Try \`$me --help' for more information." + +# Parse command line +while test $# -gt 0 ; do + case $1 in + --time-stamp | --time* | -t ) + echo "$timestamp" ; exit ;; + --version | -v ) + echo "$version" ; exit ;; + --help | --h* | -h ) + echo "$usage"; exit ;; + -- ) # Stop option processing + shift; break ;; + - ) # Use stdin as input. + break ;; + -* ) + echo "$me: invalid option $1$help" + exit 1 ;; + + *local*) + # First pass through any local machine types. + echo $1 + exit ;; + + * ) + break ;; + esac +done + +case $# in + 0) echo "$me: missing argument$help" >&2 + exit 1;; + 1) ;; + *) echo "$me: too many arguments$help" >&2 + exit 1;; +esac + +# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). +# Here we must recognize all the valid KERNEL-OS combinations. +maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` +case $maybe_os in + nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ + uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ + kopensolaris*-gnu* | \ + storm-chaos* | os2-emx* | rtmk-nova*) + os=-$maybe_os + basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` + ;; + *) + basic_machine=`echo $1 | sed 's/-[^-]*$//'` + if [ $basic_machine != $1 ] + then os=`echo $1 | sed 's/.*-/-/'` + else os=; fi + ;; +esac + +### Let's recognize common machines as not being operating systems so +### that things like config.sub decstation-3100 work. We also +### recognize some manufacturers as not being operating systems, so we +### can provide default operating systems below. +case $os in + -sun*os*) + # Prevent following clause from handling this invalid input. + ;; + -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ + -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ + -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ + -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ + -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ + -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ + -apple | -axis | -knuth | -cray) + os= + basic_machine=$1 + ;; + -bluegene*) + os=-cnk + ;; + -sim | -cisco | -oki | -wec | -winbond) + os= + basic_machine=$1 + ;; + -scout) + ;; + -wrs) + os=-vxworks + basic_machine=$1 + ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; + -hiux*) + os=-hiuxwe2 + ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5) + os=-sco3.2v5 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco4) + os=-sco3.2v4 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2.[4-9]*) + os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco3.2v[4-9]*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -sco*) + os=-sco3.2v2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -udk*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -isc) + os=-isc2.2 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -clix*) + basic_machine=clipper-intergraph + ;; + -isc*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; + -lynx*) + os=-lynxos + ;; + -ptx*) + basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` + ;; + -windowsnt*) + os=`echo $os | sed -e 's/windowsnt/winnt/'` + ;; + -psos*) + os=-psos + ;; + -mint | -mint[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; +esac + +# Decode aliases for certain CPU-COMPANY combinations. +case $basic_machine in + # Recognize the basic CPU types without company name. + # Some are omitted here because they have special meanings below. + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | am33_2.0 \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ + | bfin \ + | c4x | clipper \ + | d10v | d30v | dlx | dsp16xx \ + | fido | fr30 | frv \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | ip2k | iq2000 \ + | lm32 \ + | m32c | m32r | m32rle | m68000 | m68k | m88k \ + | maxq | mb | microblaze | mcore | mep | metag \ + | mips | mipsbe | mipseb | mipsel | mipsle \ + | mips16 \ + | mips64 | mips64el \ + | mips64octeon | mips64octeonel \ + | mips64orion | mips64orionel \ + | mips64r5900 | mips64r5900el \ + | mips64vr | mips64vrel \ + | mips64vr4100 | mips64vr4100el \ + | mips64vr4300 | mips64vr4300el \ + | mips64vr5000 | mips64vr5000el \ + | mips64vr5900 | mips64vr5900el \ + | mipsisa32 | mipsisa32el \ + | mipsisa32r2 | mipsisa32r2el \ + | mipsisa64 | mipsisa64el \ + | mipsisa64r2 | mipsisa64r2el \ + | mipsisa64sb1 | mipsisa64sb1el \ + | mipsisa64sr71k | mipsisa64sr71kel \ + | mipstx39 | mipstx39el \ + | mn10200 | mn10300 \ + | moxie \ + | mt \ + | msp430 \ + | nios | nios2 \ + | ns16k | ns32k \ + | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | score \ + | sh | sh[1234] | sh[24]a | sh[24]aeb | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ + | sh64 | sh64le \ + | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ + | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ + | spu | strongarm \ + | tahoe | thumb | tic4x | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ + | z8k | z80) + basic_machine=$basic_machine-unknown + ;; + m6811 | m68hc11 | m6812 | m68hc12) + # Motorola 68HC11/12. + basic_machine=$basic_machine-unknown + os=-none + ;; + m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) + ;; + ms1) + basic_machine=mt-unknown + ;; + + # We use `pc' rather than `unknown' + # because (1) that's what they normally are, and + # (2) the word "unknown" tends to confuse beginning users. + i*86 | x86_64) + basic_machine=$basic_machine-pc + ;; + # Object if more than one company name word. + *-*-*) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; + # Recognize the basic CPU types with company name. + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ + | avr-* | avr32-* \ + | bfin-* | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ + | clipper-* | craynv-* | cydra-* \ + | d10v-* | d30v-* | dlx-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | ip2k-* | iq2000-* \ + | lm32-* \ + | m32c-* | m32r-* | m32rle-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | maxq-* | mcore-* | metag-* \ + | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ + | mips16-* \ + | mips64-* | mips64el-* \ + | mips64octeon-* | mips64octeonel-* \ + | mips64orion-* | mips64orionel-* \ + | mips64r5900-* | mips64r5900el-* \ + | mips64vr-* | mips64vrel-* \ + | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* \ + | mips64vr5000-* | mips64vr5000el-* \ + | mips64vr5900-* | mips64vr5900el-* \ + | mipsisa32-* | mipsisa32el-* \ + | mipsisa32r2-* | mipsisa32r2el-* \ + | mipsisa64-* | mipsisa64el-* \ + | mipsisa64r2-* | mipsisa64r2el-* \ + | mipsisa64sb1-* | mipsisa64sb1el-* \ + | mipsisa64sr71k-* | mipsisa64sr71kel-* \ + | mipstx39-* | mipstx39el-* \ + | mmix-* \ + | mt-* \ + | msp430-* \ + | nios-* | nios2-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[1234]-* | sh[24]a-* | sh[24]aeb-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ + | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ + | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ + | sparclite-* \ + | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* \ + | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* | tile-* \ + | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ + | xstormy16-* | xtensa*-* \ + | ymp-* \ + | z8k-* | z80-*) + ;; + # Recognize the basic CPU types without company name, with glob match. + xtensa*) + basic_machine=$basic_machine-unknown + ;; + # Recognize the various machine names and aliases which stand + # for a CPU type and a company and sometimes even an OS. + 386bsd) + basic_machine=i386-unknown + os=-bsd + ;; + 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) + basic_machine=m68000-att + ;; + 3b*) + basic_machine=we32k-att + ;; + a29khif) + basic_machine=a29k-amd + os=-udi + ;; + abacus) + basic_machine=abacus-unknown + ;; + adobe68k) + basic_machine=m68010-adobe + os=-scout + ;; + alliant | fx80) + basic_machine=fx80-alliant + ;; + altos | altos3068) + basic_machine=m68k-altos + ;; + am29k) + basic_machine=a29k-none + os=-bsd + ;; + amd64) + basic_machine=x86_64-pc + ;; + amd64-*) + basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + amdahl) + basic_machine=580-amdahl + os=-sysv + ;; + amiga | amiga-*) + basic_machine=m68k-unknown + ;; + amigaos | amigados) + basic_machine=m68k-unknown + os=-amigaos + ;; + amigaunix | amix) + basic_machine=m68k-unknown + os=-sysv4 + ;; + apollo68) + basic_machine=m68k-apollo + os=-sysv + ;; + apollo68bsd) + basic_machine=m68k-apollo + os=-bsd + ;; + aros) + basic_machine=i386-pc + os=-aros + ;; + aux) + basic_machine=m68k-apple + os=-aux + ;; + balance) + basic_machine=ns32k-sequent + os=-dynix + ;; + blackfin) + basic_machine=bfin-unknown + os=-linux + ;; + blackfin-*) + basic_machine=bfin-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + bluegene*) + basic_machine=powerpc-ibm + os=-cnk + ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; + cegcc) + basic_machine=arm-unknown + os=-cegcc + ;; + convex-c1) + basic_machine=c1-convex + os=-bsd + ;; + convex-c2) + basic_machine=c2-convex + os=-bsd + ;; + convex-c32) + basic_machine=c32-convex + os=-bsd + ;; + convex-c34) + basic_machine=c34-convex + os=-bsd + ;; + convex-c38) + basic_machine=c38-convex + os=-bsd + ;; + cray | j90) + basic_machine=j90-cray + os=-unicos + ;; + craynv) + basic_machine=craynv-cray + os=-unicosmp + ;; + cr16) + basic_machine=cr16-unknown + os=-elf + ;; + crds | unos) + basic_machine=m68k-crds + ;; + crisv32 | crisv32-* | etraxfs*) + basic_machine=crisv32-axis + ;; + cris | cris-* | etrax*) + basic_machine=cris-axis + ;; + crx) + basic_machine=crx-unknown + os=-elf + ;; + da30 | da30-*) + basic_machine=m68k-da30 + ;; + decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) + basic_machine=mips-dec + ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; + delta | 3300 | motorola-3300 | motorola-delta \ + | 3300-motorola | delta-motorola) + basic_machine=m68k-motorola + ;; + delta88) + basic_machine=m88k-motorola + os=-sysv3 + ;; + dicos) + basic_machine=i686-pc + os=-dicos + ;; + djgpp) + basic_machine=i586-pc + os=-msdosdjgpp + ;; + dpx20 | dpx20-*) + basic_machine=rs6000-bull + os=-bosx + ;; + dpx2* | dpx2*-bull) + basic_machine=m68k-bull + os=-sysv3 + ;; + ebmon29k) + basic_machine=a29k-amd + os=-ebmon + ;; + elxsi) + basic_machine=elxsi-elxsi + os=-bsd + ;; + encore | umax | mmax) + basic_machine=ns32k-encore + ;; + es1800 | OSE68k | ose68k | ose | OSE) + basic_machine=m68k-ericsson + os=-ose + ;; + fx2800) + basic_machine=i860-alliant + ;; + genix) + basic_machine=ns32k-ns + ;; + gmicro) + basic_machine=tron-gmicro + os=-sysv + ;; + go32) + basic_machine=i386-pc + os=-go32 + ;; + h3050r* | hiux*) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + h8300hms) + basic_machine=h8300-hitachi + os=-hms + ;; + h8300xray) + basic_machine=h8300-hitachi + os=-xray + ;; + h8500hms) + basic_machine=h8500-hitachi + os=-hms + ;; + harris) + basic_machine=m88k-harris + os=-sysv3 + ;; + hp300-*) + basic_machine=m68k-hp + ;; + hp300bsd) + basic_machine=m68k-hp + os=-bsd + ;; + hp300hpux) + basic_machine=m68k-hp + os=-hpux + ;; + hp3k9[0-9][0-9] | hp9[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k2[0-9][0-9] | hp9k31[0-9]) + basic_machine=m68000-hp + ;; + hp9k3[2-9][0-9]) + basic_machine=m68k-hp + ;; + hp9k6[0-9][0-9] | hp6[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hp9k7[0-79][0-9] | hp7[0-79][0-9]) + basic_machine=hppa1.1-hp + ;; + hp9k78[0-9] | hp78[0-9]) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) + # FIXME: really hppa2.0-hp + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][13679] | hp8[0-9][13679]) + basic_machine=hppa1.1-hp + ;; + hp9k8[0-9][0-9] | hp8[0-9][0-9]) + basic_machine=hppa1.0-hp + ;; + hppa-next) + os=-nextstep3 + ;; + hppaosf) + basic_machine=hppa1.1-hp + os=-osf + ;; + hppro) + basic_machine=hppa1.1-hp + os=-proelf + ;; + i370-ibm* | ibm*) + basic_machine=i370-ibm + ;; +# I'm not sure what "Sysv32" means. Should this be sysv3.2? + i*86v32) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv32 + ;; + i*86v4*) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv4 + ;; + i*86v) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-sysv + ;; + i*86sol2) + basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` + os=-solaris2 + ;; + i386mach) + basic_machine=i386-mach + os=-mach + ;; + i386-vsta | vsta) + basic_machine=i386-unknown + os=-vsta + ;; + iris | iris4d) + basic_machine=mips-sgi + case $os in + -irix*) + ;; + *) + os=-irix4 + ;; + esac + ;; + isi68 | isi) + basic_machine=m68k-isi + os=-sysv + ;; + m68knommu) + basic_machine=m68k-unknown + os=-linux + ;; + m68knommu-*) + basic_machine=m68k-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + m88k-omron*) + basic_machine=m88k-omron + ;; + magnum | m3230) + basic_machine=mips-mips + os=-sysv + ;; + merlin) + basic_machine=ns32k-utek + os=-sysv + ;; + mingw32) + basic_machine=i386-pc + os=-mingw32 + ;; + mingw32ce) + basic_machine=arm-unknown + os=-mingw32ce + ;; + miniframe) + basic_machine=m68000-convergent + ;; + *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) + basic_machine=m68k-atari + os=-mint + ;; + mips3*-*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` + ;; + mips3*) + basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown + ;; + monitor) + basic_machine=m68k-rom68k + os=-coff + ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; + msdos) + basic_machine=i386-pc + os=-msdos + ;; + ms1-*) + basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` + ;; + mvs) + basic_machine=i370-ibm + os=-mvs + ;; + ncr3000) + basic_machine=i486-ncr + os=-sysv4 + ;; + netbsd386) + basic_machine=i386-unknown + os=-netbsd + ;; + netwinder) + basic_machine=armv4l-rebel + os=-linux + ;; + news | news700 | news800 | news900) + basic_machine=m68k-sony + os=-newsos + ;; + news1000) + basic_machine=m68030-sony + os=-newsos + ;; + news-3600 | risc-news) + basic_machine=mips-sony + os=-newsos + ;; + necv70) + basic_machine=v70-nec + os=-sysv + ;; + next | m*-next ) + basic_machine=m68k-next + case $os in + -nextstep* ) + ;; + -ns2*) + os=-nextstep2 + ;; + *) + os=-nextstep3 + ;; + esac + ;; + nh3000) + basic_machine=m68k-harris + os=-cxux + ;; + nh[45]000) + basic_machine=m88k-harris + os=-cxux + ;; + nindy960) + basic_machine=i960-intel + os=-nindy + ;; + mon960) + basic_machine=i960-intel + os=-mon960 + ;; + nonstopux) + basic_machine=mips-compaq + os=-nonstopux + ;; + np1) + basic_machine=np1-gould + ;; + nsr-tandem) + basic_machine=nsr-tandem + ;; + op50n-* | op60c-*) + basic_machine=hppa1.1-oki + os=-proelf + ;; + openrisc | openrisc-*) + basic_machine=or32-unknown + ;; + os400) + basic_machine=powerpc-ibm + os=-os400 + ;; + OSE68000 | ose68000) + basic_machine=m68000-ericsson + os=-ose + ;; + os68k) + basic_machine=m68k-none + os=-os68k + ;; + pa-hitachi) + basic_machine=hppa1.1-hitachi + os=-hiuxwe2 + ;; + paragon) + basic_machine=i860-intel + os=-osf + ;; + parisc) + basic_machine=hppa-unknown + os=-linux + ;; + parisc-*) + basic_machine=hppa-`echo $basic_machine | sed 's/^[^-]*-//'` + os=-linux + ;; + pbd) + basic_machine=sparc-tti + ;; + pbb) + basic_machine=m68k-tti + ;; + pc532 | pc532-*) + basic_machine=ns32k-pc532 + ;; + pc98) + basic_machine=i386-pc + ;; + pc98-*) + basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium | p5 | k5 | k6 | nexgen | viac3) + basic_machine=i586-pc + ;; + pentiumpro | p6 | 6x86 | athlon | athlon_*) + basic_machine=i686-pc + ;; + pentiumii | pentium2 | pentiumiii | pentium3) + basic_machine=i686-pc + ;; + pentium4) + basic_machine=i786-pc + ;; + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) + basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumpro-* | p6-* | 6x86-* | athlon-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) + basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pentium4-*) + basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + pn) + basic_machine=pn-gould + ;; + power) basic_machine=power-ibm + ;; + ppc) basic_machine=powerpc-unknown + ;; + ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppcle | powerpclittle | ppc-le | powerpc-little) + basic_machine=powerpcle-unknown + ;; + ppcle-* | powerpclittle-*) + basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ps2) + basic_machine=i386-ibm + ;; + pw32) + basic_machine=i586-unknown + os=-pw32 + ;; + rdos) + basic_machine=i386-pc + os=-rdos + ;; + rom68k) + basic_machine=m68k-rom68k + os=-coff + ;; + rm[46]00) + basic_machine=mips-siemens + ;; + rtpc | rtpc-*) + basic_machine=romp-ibm + ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; + sa29200) + basic_machine=a29k-amd + os=-udi + ;; + sb1) + basic_machine=mipsisa64sb1-unknown + ;; + sb1el) + basic_machine=mipsisa64sb1el-unknown + ;; + sde) + basic_machine=mipsisa32-sde + os=-elf + ;; + sei) + basic_machine=mips-sei + os=-seiux + ;; + sequent) + basic_machine=i386-sequent + ;; + sh) + basic_machine=sh-hitachi + os=-hms + ;; + sh5el) + basic_machine=sh5le-unknown + ;; + sh64) + basic_machine=sh64-unknown + ;; + sparclite-wrs | simso-wrs) + basic_machine=sparclite-wrs + os=-vxworks + ;; + sps7) + basic_machine=m68k-bull + os=-sysv2 + ;; + spur) + basic_machine=spur-unknown + ;; + st2000) + basic_machine=m68k-tandem + ;; + stratus) + basic_machine=i860-stratus + os=-sysv4 + ;; + sun2) + basic_machine=m68000-sun + ;; + sun2os3) + basic_machine=m68000-sun + os=-sunos3 + ;; + sun2os4) + basic_machine=m68000-sun + os=-sunos4 + ;; + sun3os3) + basic_machine=m68k-sun + os=-sunos3 + ;; + sun3os4) + basic_machine=m68k-sun + os=-sunos4 + ;; + sun4os3) + basic_machine=sparc-sun + os=-sunos3 + ;; + sun4os4) + basic_machine=sparc-sun + os=-sunos4 + ;; + sun4sol2) + basic_machine=sparc-sun + os=-solaris2 + ;; + sun3 | sun3-*) + basic_machine=m68k-sun + ;; + sun4) + basic_machine=sparc-sun + ;; + sun386 | sun386i | roadrunner) + basic_machine=i386-sun + ;; + sv1) + basic_machine=sv1-cray + os=-unicos + ;; + symmetry) + basic_machine=i386-sequent + os=-dynix + ;; + t3e) + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray + os=-unicos + ;; + tic54x | c54x*) + basic_machine=tic54x-unknown + os=-coff + ;; + tic55x | c55x*) + basic_machine=tic55x-unknown + os=-coff + ;; + tic6x | c6x*) + basic_machine=tic6x-unknown + os=-coff + ;; + tile*) + basic_machine=tile-unknown + os=-linux-gnu + ;; + tx39) + basic_machine=mipstx39-unknown + ;; + tx39el) + basic_machine=mipstx39el-unknown + ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; + tower | tower-32) + basic_machine=m68k-ncr + ;; + tpf) + basic_machine=s390x-ibm + os=-tpf + ;; + udi29k) + basic_machine=a29k-amd + os=-udi + ;; + ultra3) + basic_machine=a29k-nyu + os=-sym1 + ;; + v810 | necv810) + basic_machine=v810-nec + os=-none + ;; + vaxv) + basic_machine=vax-dec + os=-sysv + ;; + vms) + basic_machine=vax-dec + os=-vms + ;; + vpp*|vx|vx-*) + basic_machine=f301-fujitsu + ;; + vxworks960) + basic_machine=i960-wrs + os=-vxworks + ;; + vxworks68) + basic_machine=m68k-wrs + os=-vxworks + ;; + vxworks29k) + basic_machine=a29k-wrs + os=-vxworks + ;; + w65*) + basic_machine=w65-wdc + os=-none + ;; + w89k-*) + basic_machine=hppa1.1-winbond + os=-proelf + ;; + xbox) + basic_machine=i686-pc + os=-mingw32 + ;; + xps | xps100) + basic_machine=xps100-honeywell + ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; + z8k-*-coff) + basic_machine=z8k-unknown + os=-sim + ;; + z80-*-coff) + basic_machine=z80-unknown + os=-sim + ;; + none) + basic_machine=none-none + os=-none + ;; + +# Here we handle the default manufacturer of certain CPU types. It is in +# some cases the only manufacturer, in others, it is the most popular. + w89k) + basic_machine=hppa1.1-winbond + ;; + op50n) + basic_machine=hppa1.1-oki + ;; + op60c) + basic_machine=hppa1.1-oki + ;; + romp) + basic_machine=romp-ibm + ;; + mmix) + basic_machine=mmix-knuth + ;; + rs6000) + basic_machine=rs6000-ibm + ;; + vax) + basic_machine=vax-dec + ;; + pdp10) + # there are many clones, so DEC is not a safe bet + basic_machine=pdp10-unknown + ;; + pdp11) + basic_machine=pdp11-dec + ;; + we32k) + basic_machine=we32k-att + ;; + sh[1234] | sh[24]a | sh[24]aeb | sh[34]eb | sh[1234]le | sh[23]ele) + basic_machine=sh-unknown + ;; + sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) + basic_machine=sparc-sun + ;; + cydra) + basic_machine=cydra-cydrome + ;; + orion) + basic_machine=orion-highlevel + ;; + orion105) + basic_machine=clipper-highlevel + ;; + mac | mpw | mac-mpw) + basic_machine=m68k-apple + ;; + pmac | pmac-mpw) + basic_machine=powerpc-apple + ;; + *-unknown) + # Make sure to match an already-canonicalized machine name. + ;; + *) + echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 + exit 1 + ;; +esac + +# Here we canonicalize certain aliases for manufacturers. +case $basic_machine in + *-digital*) + basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` + ;; + *-commodore*) + basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` + ;; + *) + ;; +esac + +# Decode manufacturer-specific aliases for certain operating systems. + +if [ x"$os" != x"" ] +then +case $os in + # First match some system type aliases + # that might get confused with valid system types. + # -solaris* is a basic system type, with this one exception. + -solaris1 | -solaris1.*) + os=`echo $os | sed -e 's|solaris1|sunos4|'` + ;; + -solaris) + os=-solaris2 + ;; + -svr4*) + os=-sysv4 + ;; + -unixware*) + os=-sysv4.2uw + ;; + -gnu/linux*) + os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` + ;; + # First accept the basic system types. + # The portable systems comes first. + # Each alternative MUST END IN A *, to match a version number. + # -sysv* is not here because it comes later, after sysvr4. + -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ + | -*vms* | -sco* | -esix* | -isc* | -aix* | -cnk* | -sunos | -sunos[34]*\ + | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ + | -kopensolaris* \ + | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ + | -aos* | -aros* \ + | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ + | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ + | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ + | -openbsd* | -solidbsd* \ + | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ + | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ + | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ + | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* | -cegcc* \ + | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ + | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ + | -uxpv* | -beos* | -mpeix* | -udk* \ + | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ + | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ + | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ + | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) + # Remember, each alternative MUST END IN *, to match a version number. + ;; + -qnx*) + case $basic_machine in + x86-* | i*86-*) + ;; + *) + os=-nto$os + ;; + esac + ;; + -nto-qnx*) + ;; + -nto*) + os=`echo $os | sed -e 's|nto|nto-qnx|'` + ;; + -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ + | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ + | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) + ;; + -mac*) + os=`echo $os | sed -e 's|mac|macos|'` + ;; + -linux-dietlibc) + os=-linux-dietlibc + ;; + -linux*) + os=`echo $os | sed -e 's|linux|linux-gnu|'` + ;; + -sunos5*) + os=`echo $os | sed -e 's|sunos5|solaris2|'` + ;; + -sunos6*) + os=`echo $os | sed -e 's|sunos6|solaris3|'` + ;; + -opened*) + os=-openedition + ;; + -os400*) + os=-os400 + ;; + -wince*) + os=-wince + ;; + -osfrose*) + os=-osfrose + ;; + -osf*) + os=-osf + ;; + -utek*) + os=-bsd + ;; + -dynix*) + os=-bsd + ;; + -acis*) + os=-aos + ;; + -atheos*) + os=-atheos + ;; + -syllable*) + os=-syllable + ;; + -386bsd) + os=-bsd + ;; + -ctix* | -uts*) + os=-sysv + ;; + -nova*) + os=-rtmk-nova + ;; + -ns2 ) + os=-nextstep2 + ;; + -nsk*) + os=-nsk + ;; + # Preserve the version number of sinix5. + -sinix5.*) + os=`echo $os | sed -e 's|sinix|sysv|'` + ;; + -sinix*) + os=-sysv4 + ;; + -tpf*) + os=-tpf + ;; + -triton*) + os=-sysv3 + ;; + -oss*) + os=-sysv3 + ;; + -svr4) + os=-sysv4 + ;; + -svr3) + os=-sysv3 + ;; + -sysvr4) + os=-sysv4 + ;; + # This must come after -sysvr4. + -sysv*) + ;; + -ose*) + os=-ose + ;; + -es1800*) + os=-ose + ;; + -xenix) + os=-xenix + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + os=-mint + ;; + -aros*) + os=-aros + ;; + -kaos*) + os=-kaos + ;; + -zvmoe) + os=-zvmoe + ;; + -dicos*) + os=-dicos + ;; + -none) + ;; + *) + # Get rid of the `-' at the beginning of $os. + os=`echo $os | sed 's/[^-]*-//'` + echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 + exit 1 + ;; +esac +else + +# Here we handle the default operating systems that come with various machines. +# The value should be what the vendor currently ships out the door with their +# machine or put another way, the most popular os provided with the machine. + +# Note that if you're going to try to match "-MANUFACTURER" here (say, +# "-sun"), then you have to tell the case statement up towards the top +# that MANUFACTURER isn't an operating system. Otherwise, code above +# will signal an error saying that MANUFACTURER isn't an operating +# system, and we'll never get to this point. + +case $basic_machine in + score-*) + os=-elf + ;; + spu-*) + os=-elf + ;; + *-acorn) + os=-riscix1.2 + ;; + arm*-rebel) + os=-linux + ;; + arm*-semi) + os=-aout + ;; + c4x-* | tic4x-*) + os=-coff + ;; + # This must come before the *-dec entry. + pdp10-*) + os=-tops20 + ;; + pdp11-*) + os=-none + ;; + *-dec | vax-*) + os=-ultrix4.2 + ;; + m68*-apollo) + os=-domain + ;; + i386-sun) + os=-sunos4.0.2 + ;; + m68000-sun) + os=-sunos3 + # This also exists in the configure program, but was not the + # default. + # os=-sunos4 + ;; + m68*-cisco) + os=-aout + ;; + mep-*) + os=-elf + ;; + mips*-cisco) + os=-elf + ;; + mips*-*) + os=-elf + ;; + or32-*) + os=-coff + ;; + *-tti) # must be before sparc entry or we get the wrong os. + os=-sysv3 + ;; + sparc-* | *-sun) + os=-sunos4.1.1 + ;; + *-be) + os=-beos + ;; + *-haiku) + os=-haiku + ;; + *-ibm) + os=-aix + ;; + *-knuth) + os=-mmixware + ;; + *-wec) + os=-proelf + ;; + *-winbond) + os=-proelf + ;; + *-oki) + os=-proelf + ;; + *-hp) + os=-hpux + ;; + *-hitachi) + os=-hiux + ;; + i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) + os=-sysv + ;; + *-cbm) + os=-amigaos + ;; + *-dg) + os=-dgux + ;; + *-dolphin) + os=-sysv3 + ;; + m68k-ccur) + os=-rtu + ;; + m88k-omron*) + os=-luna + ;; + *-next ) + os=-nextstep + ;; + *-sequent) + os=-ptx + ;; + *-crds) + os=-unos + ;; + *-ns) + os=-genix + ;; + i370-*) + os=-mvs + ;; + *-next) + os=-nextstep3 + ;; + *-gould) + os=-sysv + ;; + *-highlevel) + os=-bsd + ;; + *-encore) + os=-bsd + ;; + *-sgi) + os=-irix + ;; + *-siemens) + os=-sysv4 + ;; + *-masscomp) + os=-rtu + ;; + f30[01]-fujitsu | f700-fujitsu) + os=-uxpv + ;; + *-rom68k) + os=-coff + ;; + *-*bug) + os=-coff + ;; + *-apple) + os=-macos + ;; + *-atari*) + os=-mint + ;; + *) + os=-none + ;; +esac +fi + +# Here we handle the case where we know the os, and the CPU type, but not the +# manufacturer. We pick the logical manufacturer. +vendor=unknown +case $basic_machine in + *-unknown) + case $os in + -riscix*) + vendor=acorn + ;; + -sunos*) + vendor=sun + ;; + -cnk*|-aix*) + vendor=ibm + ;; + -beos*) + vendor=be + ;; + -hpux*) + vendor=hp + ;; + -mpeix*) + vendor=hp + ;; + -hiux*) + vendor=hitachi + ;; + -unos*) + vendor=crds + ;; + -dgux*) + vendor=dg + ;; + -luna*) + vendor=omron + ;; + -genix*) + vendor=ns + ;; + -mvs* | -opened*) + vendor=ibm + ;; + -os400*) + vendor=ibm + ;; + -ptx*) + vendor=sequent + ;; + -tpf*) + vendor=ibm + ;; + -vxsim* | -vxworks* | -windiss*) + vendor=wrs + ;; + -aux*) + vendor=apple + ;; + -hms*) + vendor=hitachi + ;; + -mpw* | -macos*) + vendor=apple + ;; + -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) + vendor=atari + ;; + -vos*) + vendor=stratus + ;; + esac + basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` + ;; +esac + +echo $basic_machine$os +exit + +# Local variables: +# eval: (add-hook 'write-file-hooks 'time-stamp) +# time-stamp-start: "timestamp='" +# time-stamp-format: "%:y-%02m-%02d" +# time-stamp-end: "'" +# End: diff --git a/src/3rdparty/libconninet/configure.ac b/src/3rdparty/libconninet/configure.ac new file mode 100644 index 0000000..2a383ee --- /dev/null +++ b/src/3rdparty/libconninet/configure.ac @@ -0,0 +1,90 @@ +AC_INIT([libconninet], patsubst(esyscmd([dpkg-parsechangelog | sed -n '/^Version: \(.*\)$/ {s//\1/;p}']), [ +]), [jukka.rissanen@nokia.com]) +AM_INIT_AUTOMAKE([foreign]) + +AC_PROG_CXX +AC_PROG_LIBTOOL + +AC_ARG_ENABLE(docs, [ --enable-docs Build DOXYGEN documentation (requires Doxygen)],enable_docs=$enableval,enable_docs=auto) + +AC_PATH_PROG(DOXYGEN, doxygen, no) +AC_MSG_CHECKING([whether to build Doxygen documentation]) + +if test x$DOXYGEN = xno ; then + have_doxygen=no +else + have_doxygen=yes +fi +if test x$enable_docs = xauto ; then + if test x$have_doxygen = xno ; then + enable_docs=no + else + enable_docs=yes + fi +fi +if test x$enable_docs = xyes; then + if test x$have_doxygen = xno; then + AC_MSG_ERROR([Building Doxygen docs explicitly required, but Doxygen not found]) + else + AC_MSG_RESULT(yes) + fi +else + AC_MSG_RESULT(no) +fi + +AM_CONDITIONAL(DOXYGEN_DOCS_ENABLED, test x$enable_docs = xyes) +AC_SUBST(DOXYGEN) + +PKG_CHECK_MODULES(GLIB, glib-2.0) +AC_SUBST(GLIB_CFLAGS) +AC_SUBST(GLIB_LIBS) + +PKG_CHECK_MODULES(QTCORE, QtCore) +AC_SUBST(QTCORE_CFLAGS) +AC_SUBST(QTCORE_LIBS) + +PKG_CHECK_MODULES(QTNETWORK, QtNetwork) +AC_SUBST(QTNETWORK_CFLAGS) +AC_SUBST(QTNETWORK_LIBS) + +PKG_CHECK_MODULES(QTDBUS, QtDBus) +AC_SUBST(QTDBUS_CFLAGS) +AC_SUBST(QTDBUS_LIBS) + +PKG_CHECK_MODULES(QTTEST, QtTest) +AC_SUBST(QTTEST_CFLAGS) +AC_SUBST(QTTEST_LIBS) + +PKG_CHECK_MODULES(DBUS, dbus-glib-1) +AC_SUBST(DBUS_CFLAGS) +AC_SUBST(DBUS_LIBS) + +PKG_CHECK_MODULES(CONNSETTINGS, connsettings) +AC_SUBST(CONNSETTINGS_CFLAGS) +AC_SUBST(CONNSETTINGS_LIBS) + +PKG_CHECK_MODULES(OSSO_IC, osso-ic) +AC_SUBST(OSSO_IC_CFLAGS) +AC_SUBST(OSSO_IC_LIBS) + +PKG_CHECK_MODULES(ICD_DEV, icd2) +AC_SUBST(ICD_DEV_CFLAGS) +AC_SUBST(ICD_DEV_LIBS) + +PKG_CHECK_MODULES(GCONF, gconf-2.0) +AC_SUBST(GCONF_CFLAGS) +AC_SUBST(GCONF_LIBS) + +PKG_CHECK_MODULES(QGCONF, gq-gconf) +AC_SUBST(QGCONF_CFLAGS) +AC_SUBST(QGCONF_LIBS) + +CONCFLAGS="-Wall -Werror -Wmissing-prototypes" +AC_SUBST(CONCFLAGS) + +AC_CONFIG_FILES([Makefile \ + src/Makefile \ + tests/Makefile \ + conninet.pc \ + doxygen.cfg]) +AC_OUTPUT diff --git a/src/3rdparty/libconninet/conninet.pc.in b/src/3rdparty/libconninet/conninet.pc.in new file mode 100644 index 0000000..68cdee0 --- /dev/null +++ b/src/3rdparty/libconninet/conninet.pc.in @@ -0,0 +1,11 @@ +prefix=@prefix@ +exec_prefix=@exec_prefix@ +libdir=@libdir@ +includedir=@includedir@ + +Name: libconninet +Description: Internet Connectivity support library +Version: @VERSION@ +Requires: dbus-1 >= 0.60 glib-2.0 QtCore QtDBus QtGui +Libs: -lconninet +Cflags: -I${includedir}/conninet diff --git a/src/3rdparty/libconninet/debian/changelog b/src/3rdparty/libconninet/debian/changelog new file mode 100644 index 0000000..4063317 --- /dev/null +++ b/src/3rdparty/libconninet/debian/changelog @@ -0,0 +1,293 @@ +libconninet (0.42+0m6) unstable; urgency=low + + * This entry has been added by BIFH queue processor + version has been changed to 0.42+0m6 + + -- Qing Jin Thu, 22 Jul 2010 14:04:58 +0300 + +libconninet (0.42) unstable; urgency=low + + * Fixes: NB#180536 - Uploads to online services are not working. + This is a regression caused by fix to bug 175098, the timeout was never + expiring when waiting reply from icd. + + -- Jukka Rissanen Mon, 19 Jul 2010 12:23:30 +0300 + +libconninet (0.41) unstable; urgency=low + + * Fixes: NB#175098 - Qt4.7 Webkit crashes when bearer API QNetworkSession + constructor calls QNetworkSession::syncStateWithInterface() which in turn + calls Maemo::state() and Maemo::addrinfo() and webkit expects that event + loop is not run but those function process main loop events. + Now Maemo::state() and Maemo::addrinfo() are changed to be synchronous + and fully blocking functions. The old non-blocking versions are called + Maemo::state_non_blocking() and Maemo::addrinfo_non_blocking(). + + -- Jukka Rissanen Wed, 14 Jul 2010 10:12:47 +0300 + +libconninet (0.40) unstable; urgency=low + + * Fixes: NB#167465 - Unable to open network connection using libbearer + + -- Jukka Rissanen Tue, 11 May 2010 10:47:10 +0300 + +libconninet (0.39) unstable; urgency=low + + * Fixes: NB#167982 - initialize DBus vtable in DBusDispatcher. + + -- Aapo Makela Mon, 10 May 2010 14:42:39 +0300 + +libconninet (0.38) unstable; urgency=low + + * Changing icd2 connect_req to be synchronous as the check for + returned connect signal did not work correctly, this caused a + long timeout when connect() was called. + * Scan sometimes missed results and did not return them to caller. + * HTTP proxy settings were not set correctly. + + -- Jukka Rissanen Thu, 15 Apr 2010 11:25:06 +0300 + +libconninet (0.37) unstable; urgency=low + + * Make proxy config reference counting atomic. + + -- Jukka Rissanen Wed, 3 Mar 2010 13:23:08 +0200 + +libconninet (0.36) unstable; urgency=low + + * Fixes: NB#157586 - Cleanup dbus listener when WLAN scanning object is + deleted. + + -- Jukka Rissanen Fri, 26 Feb 2010 13:30:41 +0200 + +libconninet (0.35) unstable; urgency=low + + * Fixes: NB#156883 - libconninet fails to build under the Platform SDK (SB2) + + -- Jukka Rissanen Thu, 18 Feb 2010 12:14:40 +0200 + +libconninet (0.34) unstable; urgency=low + + * Coverity fix + + -- Jukka Rissanen Tue, 16 Feb 2010 16:38:00 +0200 + +libconninet (0.33) unstable; urgency=low + + * Added API to update Qt proxy config. + + -- Jukka Rissanen Tue, 26 Jan 2010 15:48:36 +0200 + +libconninet (0.32) unstable; urgency=low + + * Fixed IAPConf to unset value when set value is invalid. + * Updated IAPMonitor to use libconnsettings. + + -- Aapo Makela Wed, 03 Feb 2010 07:32:45 +0200 + +libconninet (0.31) unstable; urgency=low + + * Fixes: NB#154892 - Check nulls in IAPConf. + + -- Aapo Makela Mon, 01 Feb 2010 09:32:06 +0200 + +libconninet (0.30) unstable; urgency=low + + * Updated IAPConf to use libconnsettings. + + -- Aapo Makela Fri, 29 Jan 2010 12:58:03 +0200 + +libconninet (0.29) unstable; urgency=low + + * Fixed dependencies + + -- Jukka Rissanen Fri, 15 Jan 2010 10:16:07 +0200 + +libconninet (0.28) unstable; urgency=low + + * Get rid of libdui dependency + + -- Jukka Rissanen Wed, 13 Jan 2010 09:56:26 +0200 + +libconninet (0.27) unstable; urgency=low + + * Insert new pending calls to the list in DBusDispatcher. + + -- Aapo Makela Tue, 22 Dec 2009 14:27:32 +0200 + +libconninet (0.26) unstable; urgency=low + + * Added possibility to specify different signal path for DBusDispatcher. + + -- Aapo Makela Wed, 25 Nov 2009 14:27:34 +0200 + +libconninet (0.25) unstable; urgency=low + + * Fixes: NB#146450 - All scan results were not returned to the caller. + + -- Jukka Rissanen Mon, 16 Nov 2009 17:23:15 +0200 + +libconninet (0.24) unstable; urgency=low + + * Wait all scan results for all network types in Maemo::Icd::scan() + + -- Jukka Rissanen Fri, 6 Nov 2009 14:45:23 +0200 + +libconninet (0.23) unstable; urgency=low + + * Fixes: NB#143361 - Assert failure in session class for GPRS IAP. + + -- Jukka Rissanen Mon, 19 Oct 2009 16:00:14 +0300 + +libconninet (0.22) unstable; urgency=low + + * Fixed the error checking if scan returns 0 results. + + -- Jukka Rissanen Wed, 7 Oct 2009 13:50:27 +0300 + +libconninet (0.21) unstable; urgency=low + + * Support multiple DBusDispatcher classes at the same time. This is + required by Maemo::Icd class so that multiple instances of it can + be used the same time. + + -- Jukka Rissanen Mon, 5 Oct 2009 16:33:43 +0300 + +libconninet (0.20) unstable; urgency=low + + * Fixed memory leak in IAPConf::setValue() + + -- Jukka Rissanen Fri, 2 Oct 2009 13:02:21 +0300 + +libconninet (0.19) unstable; urgency=low + + * Fixed connect_req to one specific IAP in Icd class. + + -- Jukka Rissanen Tue, 29 Sep 2009 17:02:46 +0300 + +libconninet (0.18) unstable; urgency=low + + * Make sure the library will not abort in Icd class if scan does + not return any results. + + -- Jukka Rissanen Tue, 22 Sep 2009 17:00:12 +0300 + +libconninet (0.17) unstable; urgency=low + + * Added IAP monitoring support. + + -- Jukka Rissanen Mon, 21 Sep 2009 16:29:31 +0300 + +libconninet (0.16) unstable; urgency=low + + * Disabled the old osso-ic dbus interface as it is currently not used. + * Fixed the addrinfo request, now addresses are returned correctly to + the caller. + + -- Jukka Rissanen Thu, 17 Sep 2009 15:56:13 +0300 + +libconninet (0.15) unstable; urgency=low + + * Enabling state_req, statistics_req and addrinfo_req support + functions in Maemo::Icd as the corresponding DBUS API functions are + fixed in icd2 v0.89 + + -- Jukka Rissanen Fri, 24 Jul 2009 15:23:02 +0300 + +libconninet (0.14) unstable; urgency=low + + * Icd statistics support added. + * Icd address information support added. + * Icd scan method does not return the final (and empty) result any more. + * Added initial unit test implementation for Icd class. + * Some of the status functions in Icd class disabled because of issues + in icd2 and the dbus api. + + -- Jukka Rissanen Thu, 23 Jul 2009 11:03:05 +0300 + +libconninet (0.13) unstable; urgency=low + + * Added API to get all the configured IAPs. + + -- Jukka Rissanen Tue, 21 Jul 2009 09:47:18 +0300 + +libconninet (0.12) unstable; urgency=low + + * Replaced duivaluespace by Dui in pkg-config file because the + duivaluespace is deprecated. + + -- Jukka Rissanen Mon, 20 Jul 2009 16:00:10 +0300 + +libconninet (0.11) unstable; urgency=low + + * Using libdui instead of libduivaluespace because it is deprecated. + * The IAPConf::clear() uses native gconf API instead of launching gconftool + * Check that state_req call returned list and the list contains entries + before trying to access it. + + -- Jukka Rissanen Mon, 20 Jul 2009 14:55:15 +0300 + +libconninet (0.10) unstable; urgency=low + + * connect() did not return ok when connection succeeded. + + -- Jukka Rissanen Thu, 25 Jun 2009 09:31:21 +0300 + +libconninet (0.9) unstable; urgency=low + + * Connection timeout set to 2.5min, same as in fremantle. + + -- Jukka Rissanen Wed, 17 Jun 2009 13:36:40 +0300 + +libconninet (0.8) unstable; urgency=low + + * Fix state_req signal received from Icd + + -- Jukka Rissanen Thu, 11 Jun 2009 17:19:33 +0300 + +libconninet (0.7) unstable; urgency=low + + * Icd disconnect and select reqs are made synchronous as we do not + wait the return status. The previous async version was causing core + dumps if Icd class was destroyed too early. + + -- Jukka Rissanen Thu, 11 Jun 2009 11:52:36 +0300 + +libconninet (0.6) unstable; urgency=low + + * Fixed the libconninet0-dev dependencies. + + -- Jukka Rissanen Mon, 8 Jun 2009 10:47:56 +0300 + +libconninet (0.5) unstable; urgency=low + + * Fixed missing QObject connect functions. + * Fixed IAPConf to return invalid QVariant if the value does not exist. + + -- Jukka Rissanen Mon, 01 Jun 2009 13:58:53 +0300 + +libconninet (0.4) unstable; urgency=low + + * Fixed QObject signal setting for Maemo::Icd + + -- Jukka Rissanen Wed, 20 May 2009 13:51:11 +0300 + +libconninet (0.3) unstable; urgency=low + + * Refactoring classes + * Added IAPConf class. + + -- Jukka Rissanen Thu, 14 May 2009 13:24:11 +0300 + +libconninet (0.2) unstable; urgency=low + + * Fixed pkgconfig file which had wrong dependency + * Added DBus array and struct support to DBusDispatcher. + + -- Jukka Rissanen Wed, 13 May 2009 12:11:00 +0300 + +libconninet (0.1) unstable; urgency=low + + * Initial Release. + + -- Jukka Rissanen Tue, 12 May 2009 16:10:27 +0200 diff --git a/src/3rdparty/libconninet/debian/compat b/src/3rdparty/libconninet/debian/compat new file mode 100644 index 0000000..b8626c4 --- /dev/null +++ b/src/3rdparty/libconninet/debian/compat @@ -0,0 +1 @@ +4 diff --git a/src/3rdparty/libconninet/debian/control b/src/3rdparty/libconninet/debian/control new file mode 100644 index 0000000..2db660f --- /dev/null +++ b/src/3rdparty/libconninet/debian/control @@ -0,0 +1,39 @@ +Source: libconninet +Priority: optional +Maintainer: Jukka Rissanen +Build-Depends: debhelper (>= 4.0.0), autotools-dev, libglib2.0-dev (>= 2.8), + libdbus-1-dev (>= 0.60), libconnsettings0-dev (>= 0.4), icd2-osso-ic-dev, + icd2-dev, libqt4-dev, libgconf2-dev (>> 2.6.4), libgq-gconf-dev +Standards-Version: 3.6.2 +Section: libs + +Package: libconninet0-dev +Section: libdevel +Architecture: any +Depends: libconninet0 (= ${Source-Version}), libdbus-1-dev (>= 0.60), + libglib2.0-dev (>= 2.8), libconnsettings0-dev (>= 0.4), libqt4-dev, + icd2-osso-ic-dev, icd2-dev, libgconf2-dev (>> 2.6.4), libgq-gconf-dev +Description: Internet Connectivity support library development files + Internet Connectivity support library (libconninet) provides common + support functions for connecting to icd2 and accessing configuration + data. + . + This package contains the header files. + +Package: libconninet0 +Section: libs +Architecture: any +Depends: ${shlibs:Depends}, ${misc:Depends} +Description: Internet Connectivity support library + Internet Connectivity support library (libconninet) provides common + support functions for connecting to icd2 and accessing configuration + data. + . + This package contains the shared libraries. + +Package: libconninet0-dbg +Section: libs +Architecture: any +Depends: libconninet0 (= ${Source-Version}), ${shlibs:Depends}, ${misc:Depends} +Description: Debug symbols for the Internet Connectivity support library + Internet Connectivity support library (libconninet) debug symbols. diff --git a/src/3rdparty/libconninet/debian/copyright b/src/3rdparty/libconninet/debian/copyright new file mode 100644 index 0000000..97e8e68 --- /dev/null +++ b/src/3rdparty/libconninet/debian/copyright @@ -0,0 +1,19 @@ +libconninet - Internet Connectivity support library + +Copyright (C) 2009 Nokia Corporation. All rights reserved. + +Contact: Jukka Rissanen + +This library is free software; you can redistribute it and/or modify +it under the terms of the GNU Lesser General Public License version 2.1 +as published by the Free Software Foundation. + +This library is distributed in the hope that it will be useful, but +WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +Lesser General Public License for more details. + +You should have received a copy of the GNU Lesser General Public +License along with this library; if not, write to the Free Software +Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA +02110-1301 USA diff --git a/src/3rdparty/libconninet/debian/libconninet0-dev.dirs b/src/3rdparty/libconninet/debian/libconninet0-dev.dirs new file mode 100644 index 0000000..4418816 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0-dev.dirs @@ -0,0 +1,2 @@ +usr/lib +usr/include diff --git a/src/3rdparty/libconninet/debian/libconninet0-dev.files b/src/3rdparty/libconninet/debian/libconninet0-dev.files new file mode 100644 index 0000000..78bbac8 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0-dev.files @@ -0,0 +1,4 @@ +usr/include/* +usr/lib/lib*.so +usr/lib/pkgconfig/* +usr/share/pkgconfig/* diff --git a/src/3rdparty/libconninet/debian/libconninet0.dirs b/src/3rdparty/libconninet/debian/libconninet0.dirs new file mode 100644 index 0000000..6845771 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0.dirs @@ -0,0 +1 @@ +usr/lib diff --git a/src/3rdparty/libconninet/debian/libconninet0.files b/src/3rdparty/libconninet/debian/libconninet0.files new file mode 100644 index 0000000..d0dbfd1 --- /dev/null +++ b/src/3rdparty/libconninet/debian/libconninet0.files @@ -0,0 +1 @@ +usr/lib/lib*.so.* diff --git a/src/3rdparty/libconninet/debian/rules b/src/3rdparty/libconninet/debian/rules new file mode 100755 index 0000000..2a3d395 --- /dev/null +++ b/src/3rdparty/libconninet/debian/rules @@ -0,0 +1,123 @@ +#!/usr/bin/make -f +# -*- makefile -*- +# Sample debian/rules that uses debhelper. +# This file was originally written by Joey Hess and Craig Small. +# As a special exception, when this file is copied by dh-make into a +# dh-make output file, you may use that output file without restriction. +# This special exception was added by Craig Small in version 0.37 of dh-make. + +# Uncomment this to turn on verbose mode. +#export DH_VERBOSE=1 + + +# These are used for cross-compiling and for saving the configure script +# from having to guess our platform (since we know it already) +DEB_HOST_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_HOST_GNU_TYPE) +DEB_BUILD_GNU_TYPE ?= $(shell dpkg-architecture -qDEB_BUILD_GNU_TYPE) + + +CFLAGS = -Wall -g + +ifneq (,$(findstring noopt,$(DEB_BUILD_OPTIONS))) + CFLAGS += -O0 +else + CFLAGS += -O2 +endif + +# shared library versions, option 1 +#version=2.0.5 +#major=2 +# option 2, assuming the library is created as src/.libs/libfoo.so.2.0.5 or so +version=`ls src/.libs/lib*.so.* | \ + awk '{if (match($$0,/[0-9]+\.[0-9]+\.[0-9]+$$/)) print substr($$0,RSTART)}'` +major=`ls src/.libs/lib*.so.* | \ + awk '{if (match($$0,/\.so\.[0-9]+$$/)) print substr($$0,RSTART+4)}'` + +configure: configure.ac debian/changelog + -./autogen.sh + +config.status: configure + dh_testdir + # Add here commands to configure the package. + CFLAGS="$(CFLAGS)" ./configure \ + --host=$(DEB_HOST_GNU_TYPE) \ + --build=$(DEB_BUILD_GNU_TYPE) \ + --prefix=/usr \ + --mandir=\$${prefix}/share/man \ + --infodir=\$${prefix}/share/info + + +build: build-stamp +build-stamp: config.status + dh_testdir + + # Add here commands to compile the package. + $(MAKE) + + touch build-stamp + +clean: + dh_testdir + dh_testroot + rm -f build-stamp + + # Add here commands to clean up after the build process. + -$(MAKE) distclean +ifneq "$(wildcard /usr/share/misc/config.sub)" "" + cp -f /usr/share/misc/config.sub config.sub +endif +ifneq "$(wildcard /usr/share/misc/config.guess)" "" + cp -f /usr/share/misc/config.guess config.guess +endif + + + dh_clean + +install: build + dh_testdir + dh_testroot + dh_clean -k + dh_installdirs + + # Add here commands to install the package into debian/tmp + $(MAKE) install DESTDIR=$(CURDIR)/debian/tmp + + +# Build architecture-independent files here. +binary-indep: build install +# We have nothing to do by default. + +# Build architecture-dependent files here. +binary-arch: build install + dh_testdir + dh_testroot + dh_movefiles + dh_installchangelogs ChangeLog + dh_installdocs + dh_installexamples +# dh_install +# dh_installmenu +# dh_installdebconf +# dh_installlogrotate +# dh_installemacsen +# dh_installpam +# dh_installmime +# dh_installinit +# dh_installcron +# dh_installinfo + dh_installman + dh_link + dh_strip --dbg-package=libconninet0 + dh_compress + dh_fixperms +# dh_perl +# dh_python + dh_makeshlibs + dh_installdeb + dh_shlibdeps + dh_gencontrol + dh_md5sums + dh_builddeb + +binary: binary-indep binary-arch +.PHONY: build clean binary-indep binary-arch binary install diff --git a/src/3rdparty/libconninet/doxygen.cfg.in b/src/3rdparty/libconninet/doxygen.cfg.in new file mode 100644 index 0000000..80a4c8d --- /dev/null +++ b/src/3rdparty/libconninet/doxygen.cfg.in @@ -0,0 +1,1147 @@ +# Doxyfile 1.3.7 + +# This file describes the settings to be used by the documentation system +# doxygen (www.doxygen.org) for a project +# +# All text after a hash (#) is considered a comment and will be ignored +# The format is: +# TAG = value [value, ...] +# For lists items can also be appended using: +# TAG += value [value, ...] +# Values that contain spaces should be placed between quotes (" ") + +#--------------------------------------------------------------------------- +# Project related configuration options +#--------------------------------------------------------------------------- + +# The PROJECT_NAME tag is a single word (or a sequence of words surrounded +# by quotes) that should identify the project. + +PROJECT_NAME = "Internet Connectivity Support Library" + +# The PROJECT_NUMBER tag can be used to enter a project or revision number. +# This could be handy for archiving the generated documentation or +# if some version control system is used. + +PROJECT_NUMBER = @VERSION@ + +# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) +# base path where the generated documentation will be put. +# If a relative path is entered, it will be relative to the location +# where doxygen was started. If left blank the current directory will be used. + +OUTPUT_DIRECTORY = doc + +# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create +# 2 levels of 10 sub-directories under the output directory of each output +# format and will distribute the generated files over these directories. +# Enabling this option can be useful when feeding doxygen a huge amount of source +# files, where putting all generated files in the same directory would otherwise +# cause performance problems for the file system. + +CREATE_SUBDIRS = NO + +# The OUTPUT_LANGUAGE tag is used to specify the language in which all +# documentation generated by doxygen is written. Doxygen will use this +# information to generate all constant output in the proper language. +# The default language is English, other supported languages are: +# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, Dutch, +# Finnish, French, German, Greek, Hungarian, Italian, Japanese, Japanese-en +# (Japanese with English messages), Korean, Korean-en, Norwegian, Polish, Portuguese, +# Romanian, Russian, Serbian, Slovak, Slovene, Spanish, Swedish, and Ukrainian. + +OUTPUT_LANGUAGE = English + +# This tag can be used to specify the encoding used in the generated output. +# The encoding is not always determined by the language that is chosen, +# but also whether or not the output is meant for Windows or non-Windows users. +# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES +# forces the Windows encoding (this is the default for the Windows binary), +# whereas setting the tag to NO uses a Unix-style encoding (the default for +# all platforms other than Windows). + +USE_WINDOWS_ENCODING = NO + +# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will +# include brief member descriptions after the members that are listed in +# the file and class documentation (similar to JavaDoc). +# Set to NO to disable this. + +BRIEF_MEMBER_DESC = YES + +# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend +# the brief description of a member or function before the detailed description. +# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the +# brief descriptions will be completely suppressed. + +REPEAT_BRIEF = YES + +# This tag implements a quasi-intelligent brief description abbreviator +# that is used to form the text in various listings. Each string +# in this list, if found as the leading text of the brief description, will be +# stripped from the text and the result after processing the whole list, is used +# as the annotated text. Otherwise, the brief description is used as-is. If left +# blank, the following values are used ("$name" is automatically replaced with the +# name of the entity): "The $name class" "The $name widget" "The $name file" +# "is" "provides" "specifies" "contains" "represents" "a" "an" "the" + +ABBREVIATE_BRIEF = + +# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then +# Doxygen will generate a detailed section even if there is only a brief +# description. + +ALWAYS_DETAILED_SEC = NO + +# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all inherited +# members of a class in the documentation of that class as if those members were +# ordinary class members. Constructors, destructors and assignment operators of +# the base classes will not be shown. + +INLINE_INHERITED_MEMB = NO + +# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full +# path before files name in the file list and in the header files. If set +# to NO the shortest path that makes the file name unique will be used. + +FULL_PATH_NAMES = NO + +# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag +# can be used to strip a user-defined part of the path. Stripping is +# only done if one of the specified strings matches the left-hand part of +# the path. The tag can be used to show relative paths in the file list. +# If left blank the directory from which doxygen is run is used as the +# path to strip. + +STRIP_FROM_PATH = + +# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of +# the path mentioned in the documentation of a class, which tells +# the reader which header file to include in order to use a class. +# If left blank only the name of the header file containing the class +# definition is used. Otherwise one should specify the include paths that +# are normally passed to the compiler using the -I flag. + +STRIP_FROM_INC_PATH = + +# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter +# (but less readable) file names. This can be useful is your file systems +# doesn't support long names like on DOS, Mac, or CD-ROM. + +SHORT_NAMES = NO + +# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen +# will interpret the first line (until the first dot) of a JavaDoc-style +# comment as the brief description. If set to NO, the JavaDoc +# comments will behave just like the Qt-style comments (thus requiring an +# explicit @brief command for a brief description. + +JAVADOC_AUTOBRIEF = YES + +# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen +# treat a multi-line C++ special comment block (i.e. a block of //! or /// +# comments) as a brief description. This used to be the default behaviour. +# The new default is to treat a multi-line C++ comment block as a detailed +# description. Set this tag to YES if you prefer the old behaviour instead. + +MULTILINE_CPP_IS_BRIEF = NO + +# If the DETAILS_AT_TOP tag is set to YES then Doxygen +# will output the detailed description near the top, like JavaDoc. +# If set to NO, the detailed description appears after the member +# documentation. + +DETAILS_AT_TOP = YES + +# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented +# member inherits the documentation from any documented member that it +# re-implements. + +INHERIT_DOCS = YES + +# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC +# tag is set to YES, then doxygen will reuse the documentation of the first +# member in the group (if any) for the other members of the group. By default +# all members of a group must be documented explicitly. + +DISTRIBUTE_GROUP_DOC = NO + +# The TAB_SIZE tag can be used to set the number of spaces in a tab. +# Doxygen uses this value to replace tabs by spaces in code fragments. + +TAB_SIZE = 8 + +# This tag can be used to specify a number of aliases that acts +# as commands in the documentation. An alias has the form "name=value". +# For example adding "sideeffect=\par Side Effects:\n" will allow you to +# put the command \sideeffect (or @sideeffect) in the documentation, which +# will result in a user-defined paragraph with heading "Side Effects:". +# You can put \n's in the value part of an alias to insert newlines. + +ALIASES = + +# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C sources +# only. Doxygen will then generate output that is more tailored for C. +# For instance, some of the names that are used will be different. The list +# of all members will be omitted, etc. + +OPTIMIZE_OUTPUT_FOR_C = YES + +# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources +# only. Doxygen will then generate output that is more tailored for Java. +# For instance, namespaces will be presented as packages, qualified scopes +# will look different, etc. + +OPTIMIZE_OUTPUT_JAVA = NO + +# Set the SUBGROUPING tag to YES (the default) to allow class member groups of +# the same type (for instance a group of public functions) to be put as a +# subgroup of that type (e.g. under the Public Functions section). Set it to +# NO to prevent subgrouping. Alternatively, this can be done per class using +# the \nosubgrouping command. + +SUBGROUPING = YES + +#--------------------------------------------------------------------------- +# Build related configuration options +#--------------------------------------------------------------------------- + +# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in +# documentation are documented, even if no documentation was available. +# Private class members and static file members will be hidden unless +# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES + +EXTRACT_ALL = NO + +# If the EXTRACT_PRIVATE tag is set to YES all private members of a class +# will be included in the documentation. + +EXTRACT_PRIVATE = NO + +# If the EXTRACT_STATIC tag is set to YES all static members of a file +# will be included in the documentation. + +EXTRACT_STATIC = NO + +# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) +# defined locally in source files will be included in the documentation. +# If set to NO only classes defined in header files are included. + +EXTRACT_LOCAL_CLASSES = YES + +# This flag is only useful for Objective-C code. When set to YES local +# methods, which are defined in the implementation section but not in +# the interface are included in the documentation. +# If set to NO (the default) only methods in the interface are included. + +EXTRACT_LOCAL_METHODS = NO + +# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all +# undocumented members of documented classes, files or namespaces. +# If set to NO (the default) these members will be included in the +# various overviews, but no documentation section is generated. +# This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_MEMBERS = YES + +# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all +# undocumented classes that are normally visible in the class hierarchy. +# If set to NO (the default) these classes will be included in the various +# overviews. This option has no effect if EXTRACT_ALL is enabled. + +HIDE_UNDOC_CLASSES = NO + +# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all +# friend (class|struct|union) declarations. +# If set to NO (the default) these declarations will be included in the +# documentation. + +HIDE_FRIEND_COMPOUNDS = NO + +# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any +# documentation blocks found inside the body of a function. +# If set to NO (the default) these blocks will be appended to the +# function's detailed documentation block. + +HIDE_IN_BODY_DOCS = NO + +# The INTERNAL_DOCS tag determines if documentation +# that is typed after a \internal command is included. If the tag is set +# to NO (the default) then the documentation will be excluded. +# Set it to YES to include the internal documentation. + +INTERNAL_DOCS = NO + +# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate +# file names in lower-case letters. If set to YES upper-case letters are also +# allowed. This is useful if you have classes or files whose names only differ +# in case and if your file system supports case sensitive file names. Windows +# users are advised to set this option to NO. + +CASE_SENSE_NAMES = YES + +# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen +# will show members with their full class and namespace scopes in the +# documentation. If set to YES the scope will be hidden. + +HIDE_SCOPE_NAMES = NO + +# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen +# will put a list of the files that are included by a file in the documentation +# of that file. + +SHOW_INCLUDE_FILES = YES + +# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] +# is inserted in the documentation for inline members. + +INLINE_INFO = YES + +# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen +# will sort the (detailed) documentation of file and class members +# alphabetically by member name. If set to NO the members will appear in +# declaration order. + +SORT_MEMBER_DOCS = YES + +# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the +# brief documentation of file, namespace and class members alphabetically +# by member name. If set to NO (the default) the members will appear in +# declaration order. + +SORT_BRIEF_DOCS = NO + +# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be +# sorted by fully-qualified names, including namespaces. If set to +# NO (the default), the class list will be sorted only by class name, +# not including the namespace part. +# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. +# Note: This option applies only to the class list, not to the +# alphabetical list. + +SORT_BY_SCOPE_NAME = NO + +# The GENERATE_TODOLIST tag can be used to enable (YES) or +# disable (NO) the todo list. This list is created by putting \todo +# commands in the documentation. + +GENERATE_TODOLIST = YES + +# The GENERATE_TESTLIST tag can be used to enable (YES) or +# disable (NO) the test list. This list is created by putting \test +# commands in the documentation. + +GENERATE_TESTLIST = YES + +# The GENERATE_BUGLIST tag can be used to enable (YES) or +# disable (NO) the bug list. This list is created by putting \bug +# commands in the documentation. + +GENERATE_BUGLIST = YES + +# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or +# disable (NO) the deprecated list. This list is created by putting +# \deprecated commands in the documentation. + +GENERATE_DEPRECATEDLIST= YES + +# The ENABLED_SECTIONS tag can be used to enable conditional +# documentation sections, marked by \if sectionname ... \endif. + +ENABLED_SECTIONS = + +# The MAX_INITIALIZER_LINES tag determines the maximum number of lines +# the initial value of a variable or define consists of for it to appear in +# the documentation. If the initializer consists of more lines than specified +# here it will be hidden. Use a value of 0 to hide initializers completely. +# The appearance of the initializer of individual variables and defines in the +# documentation can be controlled using \showinitializer or \hideinitializer +# command in the documentation regardless of this setting. + +MAX_INITIALIZER_LINES = 30 + +# Set the SHOW_USED_FILES tag to NO to disable the list of files generated +# at the bottom of the documentation of classes and structs. If set to YES the +# list will mention the files that were used to generate the documentation. + +SHOW_USED_FILES = YES + +#--------------------------------------------------------------------------- +# configuration options related to warning and progress messages +#--------------------------------------------------------------------------- + +# The QUIET tag can be used to turn on/off the messages that are generated +# by doxygen. Possible values are YES and NO. If left blank NO is used. + +QUIET = NO + +# The WARNINGS tag can be used to turn on/off the warning messages that are +# generated by doxygen. Possible values are YES and NO. If left blank +# NO is used. + +WARNINGS = YES + +# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings +# for undocumented members. If EXTRACT_ALL is set to YES then this flag will +# automatically be disabled. + +WARN_IF_UNDOCUMENTED = YES + +# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for +# potential errors in the documentation, such as not documenting some +# parameters in a documented function, or documenting parameters that +# don't exist or using markup commands wrongly. + +WARN_IF_DOC_ERROR = YES + +# The WARN_FORMAT tag determines the format of the warning messages that +# doxygen can produce. The string should contain the $file, $line, and $text +# tags, which will be replaced by the file and line number from which the +# warning originated and the warning text. + +WARN_FORMAT = "$file:$line: $text" + +# The WARN_LOGFILE tag can be used to specify a file to which warning +# and error messages should be written. If left blank the output is written +# to stderr. + +WARN_LOGFILE = + +#--------------------------------------------------------------------------- +# configuration options related to the input files +#--------------------------------------------------------------------------- + +# The INPUT tag can be used to specify the files and/or directories that contain +# documented source files. You may enter file names like "myfile.cpp" or +# directories like "/usr/src/myproject". Separate the files or directories +# with spaces. + +INPUT = conic/conic.h \ + conic/conicconnection.h \ + conic/conicconnectionevent.h \ + conic/conicevent.h \ + conic/coniciap.h \ + conic/conicstatisticsevent.h + +# If the value of the INPUT tag contains directories, you can use the +# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank the following patterns are tested: +# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx *.hpp +# *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm + +FILE_PATTERNS = + +# The RECURSIVE tag can be used to turn specify whether or not subdirectories +# should be searched for input files as well. Possible values are YES and NO. +# If left blank NO is used. + +RECURSIVE = NO + +# The EXCLUDE tag can be used to specify files and/or directories that should +# excluded from the INPUT source files. This way you can easily exclude a +# subdirectory from a directory tree whose root is specified with the INPUT tag. + +EXCLUDE = + +# The EXCLUDE_SYMLINKS tag can be used select whether or not files or directories +# that are symbolic links (a Unix filesystem feature) are excluded from the input. + +EXCLUDE_SYMLINKS = NO + +# If the value of the INPUT tag contains directories, you can use the +# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude +# certain files from those directories. + +EXCLUDE_PATTERNS = + +# The EXAMPLE_PATH tag can be used to specify one or more files or +# directories that contain example code fragments that are included (see +# the \include command). + +EXAMPLE_PATH = + +# If the value of the EXAMPLE_PATH tag contains directories, you can use the +# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp +# and *.h) to filter out the source-files in the directories. If left +# blank all files are included. + +EXAMPLE_PATTERNS = + +# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be +# searched for input files to be used with the \include or \dontinclude +# commands irrespective of the value of the RECURSIVE tag. +# Possible values are YES and NO. If left blank NO is used. + +EXAMPLE_RECURSIVE = NO + +# The IMAGE_PATH tag can be used to specify one or more files or +# directories that contain image that are included in the documentation (see +# the \image command). + +IMAGE_PATH = + +# The INPUT_FILTER tag can be used to specify a program that doxygen should +# invoke to filter for each input file. Doxygen will invoke the filter program +# by executing (via popen()) the command , where +# is the value of the INPUT_FILTER tag, and is the name of an +# input file. Doxygen will then use the output that the filter program writes +# to standard output. + +INPUT_FILTER = + +# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using +# INPUT_FILTER) will be used to filter the input files when producing source +# files to browse (i.e. when SOURCE_BROWSER is set to YES). + +FILTER_SOURCE_FILES = NO + +#--------------------------------------------------------------------------- +# configuration options related to source browsing +#--------------------------------------------------------------------------- + +# If the SOURCE_BROWSER tag is set to YES then a list of source files will +# be generated. Documented entities will be cross-referenced with these sources. +# Note: To get rid of all source code in the generated output, make sure also +# VERBATIM_HEADERS is set to NO. + +SOURCE_BROWSER = NO + +# Setting the INLINE_SOURCES tag to YES will include the body +# of functions and classes directly in the documentation. + +INLINE_SOURCES = NO + +# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct +# doxygen to hide any special comment blocks from generated source code +# fragments. Normal C and C++ comments will always remain visible. + +STRIP_CODE_COMMENTS = YES + +# If the REFERENCED_BY_RELATION tag is set to YES (the default) +# then for each documented function all documented +# functions referencing it will be listed. + +REFERENCED_BY_RELATION = YES + +# If the REFERENCES_RELATION tag is set to YES (the default) +# then for each documented function all documented entities +# called/used by that function will be listed. + +REFERENCES_RELATION = YES + +# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen +# will generate a verbatim copy of the header file for each class for +# which an include is specified. Set to NO to disable this. + +VERBATIM_HEADERS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the alphabetical class index +#--------------------------------------------------------------------------- + +# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index +# of all compounds will be generated. Enable this if the project +# contains a lot of classes, structs, unions or interfaces. + +ALPHABETICAL_INDEX = NO + +# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then +# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns +# in which this list will be split (can be a number in the range [1..20]) + +COLS_IN_ALPHA_INDEX = 5 + +# In case all classes in a project start with a common prefix, all +# classes will be put under the same header in the alphabetical index. +# The IGNORE_PREFIX tag can be used to specify one or more prefixes that +# should be ignored while generating the index headers. + +IGNORE_PREFIX = + +#--------------------------------------------------------------------------- +# configuration options related to the HTML output +#--------------------------------------------------------------------------- + +# If the GENERATE_HTML tag is set to YES (the default) Doxygen will +# generate HTML output. + +GENERATE_HTML = YES + +# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `html' will be used as the default path. + +HTML_OUTPUT = html + +# The HTML_FILE_EXTENSION tag can be used to specify the file extension for +# each generated HTML page (for example: .htm,.php,.asp). If it is left blank +# doxygen will generate files with .html extension. + +HTML_FILE_EXTENSION = .html + +# The HTML_HEADER tag can be used to specify a personal HTML header for +# each generated HTML page. If it is left blank doxygen will generate a +# standard header. + +HTML_HEADER = + +# The HTML_FOOTER tag can be used to specify a personal HTML footer for +# each generated HTML page. If it is left blank doxygen will generate a +# standard footer. + +HTML_FOOTER = + +# The HTML_STYLESHEET tag can be used to specify a user-defined cascading +# style sheet that is used by each HTML page. It can be used to +# fine-tune the look of the HTML output. If the tag is left blank doxygen +# will generate a default style sheet. Note that doxygen will try to copy +# the style sheet file to the HTML output directory, so don't put your own +# stylesheet in the HTML output directory as well, or it will be erased! + +HTML_STYLESHEET = + +# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, +# files or namespaces will be aligned in HTML using tables. If set to +# NO a bullet list will be used. + +HTML_ALIGN_MEMBERS = YES + +# If the GENERATE_HTMLHELP tag is set to YES, additional index files +# will be generated that can be used as input for tools like the +# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) +# of the generated HTML documentation. + +GENERATE_HTMLHELP = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can +# be used to specify the file name of the resulting .chm file. You +# can add a path in front of the file if the result should not be +# written to the html output directory. + +CHM_FILE = + +# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can +# be used to specify the location (absolute path including file name) of +# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run +# the HTML help compiler on the generated index.hhp. + +HHC_LOCATION = + +# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag +# controls if a separate .chi index file is generated (YES) or that +# it should be included in the master .chm file (NO). + +GENERATE_CHI = NO + +# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag +# controls whether a binary table of contents is generated (YES) or a +# normal table of contents (NO) in the .chm file. + +BINARY_TOC = NO + +# The TOC_EXPAND flag can be set to YES to add extra items for group members +# to the contents of the HTML help documentation and to the tree view. + +TOC_EXPAND = NO + +# The DISABLE_INDEX tag can be used to turn on/off the condensed index at +# top of each HTML page. The value NO (the default) enables the index and +# the value YES disables it. + +DISABLE_INDEX = NO + +# This tag can be used to set the number of enum values (range [1..20]) +# that doxygen will group on one line in the generated HTML documentation. + +ENUM_VALUES_PER_LINE = 4 + +# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be +# generated containing a tree-like index structure (just like the one that +# is generated for HTML Help). For this to work a browser that supports +# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, +# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are +# probably better off using the HTML help feature. + +GENERATE_TREEVIEW = NO + +# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be +# used to set the initial width (in pixels) of the frame in which the tree +# is shown. + +TREEVIEW_WIDTH = 250 + +#--------------------------------------------------------------------------- +# configuration options related to the LaTeX output +#--------------------------------------------------------------------------- + +# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will +# generate Latex output. + +GENERATE_LATEX = YES + +# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `latex' will be used as the default path. + +LATEX_OUTPUT = latex + +# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be +# invoked. If left blank `latex' will be used as the default command name. + +LATEX_CMD_NAME = latex + +# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to +# generate index for LaTeX. If left blank `makeindex' will be used as the +# default command name. + +MAKEINDEX_CMD_NAME = makeindex + +# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact +# LaTeX documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_LATEX = NO + +# The PAPER_TYPE tag can be used to set the paper type that is used +# by the printer. Possible values are: a4, a4wide, letter, legal and +# executive. If left blank a4wide will be used. + +PAPER_TYPE = a4wide + +# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX +# packages that should be included in the LaTeX output. + +EXTRA_PACKAGES = + +# The LATEX_HEADER tag can be used to specify a personal LaTeX header for +# the generated latex document. The header should contain everything until +# the first chapter. If it is left blank doxygen will generate a +# standard header. Notice: only use this tag if you know what you are doing! + +LATEX_HEADER = + +# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated +# is prepared for conversion to pdf (using ps2pdf). The pdf file will +# contain links (just like the HTML output) instead of page references +# This makes the output suitable for online browsing using a pdf viewer. + +PDF_HYPERLINKS = YES + +# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of +# plain latex in the generated Makefile. Set this option to YES to get a +# higher quality PDF documentation. + +USE_PDFLATEX = YES + +# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. +# command to the generated LaTeX files. This will instruct LaTeX to keep +# running if errors occur, instead of asking the user for help. +# This option is also used when generating formulas in HTML. + +LATEX_BATCHMODE = NO + +# If LATEX_HIDE_INDICES is set to YES then doxygen will not +# include the index chapters (such as File Index, Compound Index, etc.) +# in the output. + +LATEX_HIDE_INDICES = NO + +#--------------------------------------------------------------------------- +# configuration options related to the RTF output +#--------------------------------------------------------------------------- + +# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output +# The RTF output is optimized for Word 97 and may not look very pretty with +# other RTF readers or editors. + +GENERATE_RTF = NO + +# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `rtf' will be used as the default path. + +RTF_OUTPUT = rtf + +# If the COMPACT_RTF tag is set to YES Doxygen generates more compact +# RTF documents. This may be useful for small projects and may help to +# save some trees in general. + +COMPACT_RTF = NO + +# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated +# will contain hyperlink fields. The RTF file will +# contain links (just like the HTML output) instead of page references. +# This makes the output suitable for online browsing using WORD or other +# programs which support those fields. +# Note: wordpad (write) and others do not support links. + +RTF_HYPERLINKS = NO + +# Load stylesheet definitions from file. Syntax is similar to doxygen's +# config file, i.e. a series of assignments. You only have to provide +# replacements, missing definitions are set to their default value. + +RTF_STYLESHEET_FILE = + +# Set optional variables used in the generation of an rtf document. +# Syntax is similar to doxygen's config file. + +RTF_EXTENSIONS_FILE = + +#--------------------------------------------------------------------------- +# configuration options related to the man page output +#--------------------------------------------------------------------------- + +# If the GENERATE_MAN tag is set to YES (the default) Doxygen will +# generate man pages + +GENERATE_MAN = NO + +# The MAN_OUTPUT tag is used to specify where the man pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `man' will be used as the default path. + +MAN_OUTPUT = man + +# The MAN_EXTENSION tag determines the extension that is added to +# the generated man pages (default is the subroutine's section .3) + +MAN_EXTENSION = .3 + +# If the MAN_LINKS tag is set to YES and Doxygen generates man output, +# then it will generate one additional man file for each entity +# documented in the real man page(s). These additional files +# only source the real man page, but without them the man command +# would be unable to find the correct page. The default is NO. + +MAN_LINKS = NO + +#--------------------------------------------------------------------------- +# configuration options related to the XML output +#--------------------------------------------------------------------------- + +# If the GENERATE_XML tag is set to YES Doxygen will +# generate an XML file that captures the structure of +# the code including all documentation. + +GENERATE_XML = NO + +# The XML_OUTPUT tag is used to specify where the XML pages will be put. +# If a relative path is entered the value of OUTPUT_DIRECTORY will be +# put in front of it. If left blank `xml' will be used as the default path. + +XML_OUTPUT = xml + +# The XML_SCHEMA tag can be used to specify an XML schema, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_SCHEMA = + +# The XML_DTD tag can be used to specify an XML DTD, +# which can be used by a validating XML parser to check the +# syntax of the XML files. + +XML_DTD = + +# If the XML_PROGRAMLISTING tag is set to YES Doxygen will +# dump the program listings (including syntax highlighting +# and cross-referencing information) to the XML output. Note that +# enabling this will significantly increase the size of the XML output. + +XML_PROGRAMLISTING = YES + +#--------------------------------------------------------------------------- +# configuration options for the AutoGen Definitions output +#--------------------------------------------------------------------------- + +# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will +# generate an AutoGen Definitions (see autogen.sf.net) file +# that captures the structure of the code including all +# documentation. Note that this feature is still experimental +# and incomplete at the moment. + +GENERATE_AUTOGEN_DEF = NO + +#--------------------------------------------------------------------------- +# configuration options related to the Perl module output +#--------------------------------------------------------------------------- + +# If the GENERATE_PERLMOD tag is set to YES Doxygen will +# generate a Perl module file that captures the structure of +# the code including all documentation. Note that this +# feature is still experimental and incomplete at the +# moment. + +GENERATE_PERLMOD = NO + +# If the PERLMOD_LATEX tag is set to YES Doxygen will generate +# the necessary Makefile rules, Perl scripts and LaTeX code to be able +# to generate PDF and DVI output from the Perl module output. + +PERLMOD_LATEX = NO + +# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be +# nicely formatted so it can be parsed by a human reader. This is useful +# if you want to understand what is going on. On the other hand, if this +# tag is set to NO the size of the Perl module output will be much smaller +# and Perl will parse it just the same. + +PERLMOD_PRETTY = YES + +# The names of the make variables in the generated doxyrules.make file +# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. +# This is useful so different doxyrules.make files included by the same +# Makefile don't overwrite each other's variables. + +PERLMOD_MAKEVAR_PREFIX = + +#--------------------------------------------------------------------------- +# Configuration options related to the preprocessor +#--------------------------------------------------------------------------- + +# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will +# evaluate all C-preprocessor directives found in the sources and include +# files. + +ENABLE_PREPROCESSING = YES + +# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro +# names in the source code. If set to NO (the default) only conditional +# compilation will be performed. Macro expansion can be done in a controlled +# way by setting EXPAND_ONLY_PREDEF to YES. + +MACRO_EXPANSION = NO + +# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES +# then the macro expansion is limited to the macros specified with the +# PREDEFINED and EXPAND_AS_PREDEFINED tags. + +EXPAND_ONLY_PREDEF = NO + +# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files +# in the INCLUDE_PATH (see below) will be search if a #include is found. + +SEARCH_INCLUDES = YES + +# The INCLUDE_PATH tag can be used to specify one or more directories that +# contain include files that are not input files but should be processed by +# the preprocessor. + +INCLUDE_PATH = + +# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard +# patterns (like *.h and *.hpp) to filter out the header-files in the +# directories. If left blank, the patterns specified with FILE_PATTERNS will +# be used. + +INCLUDE_FILE_PATTERNS = + +# The PREDEFINED tag can be used to specify one or more macro names that +# are defined before the preprocessor is started (similar to the -D option of +# gcc). The argument of the tag is a list of macros of the form: name +# or name=definition (no spaces). If the definition and the = are +# omitted =1 is assumed. + +PREDEFINED = + +# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then +# this tag can be used to specify a list of macro names that should be expanded. +# The macro definition that is found in the sources will be used. +# Use the PREDEFINED tag if you want to use a different macro definition. + +EXPAND_AS_DEFINED = + +# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then +# doxygen's preprocessor will remove all function-like macros that are alone +# on a line, have an all uppercase name, and do not end with a semicolon. Such +# function macros are typically used for boiler-plate code, and will confuse the +# parser if not removed. + +SKIP_FUNCTION_MACROS = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to external references +#--------------------------------------------------------------------------- + +# The TAGFILES option can be used to specify one or more tagfiles. +# Optionally an initial location of the external documentation +# can be added for each tagfile. The format of a tag file without +# this location is as follows: +# TAGFILES = file1 file2 ... +# Adding location for the tag files is done as follows: +# TAGFILES = file1=loc1 "file2 = loc2" ... +# where "loc1" and "loc2" can be relative or absolute paths or +# URLs. If a location is present for each tag, the installdox tool +# does not have to be run to correct the links. +# Note that each tag file must have a unique name +# (where the name does NOT include the path) +# If a tag file is not located in the directory in which doxygen +# is run, you must also specify the path to the tagfile here. + +TAGFILES = + +# When a file name is specified after GENERATE_TAGFILE, doxygen will create +# a tag file that is based on the input files it reads. + +GENERATE_TAGFILE = + +# If the ALLEXTERNALS tag is set to YES all external classes will be listed +# in the class index. If set to NO only the inherited external classes +# will be listed. + +ALLEXTERNALS = NO + +# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed +# in the modules index. If set to NO, only the current project's groups will +# be listed. + +EXTERNAL_GROUPS = YES + +# The PERL_PATH should be the absolute path and name of the perl script +# interpreter (i.e. the result of `which perl'). + +PERL_PATH = /usr/bin/perl + +#--------------------------------------------------------------------------- +# Configuration options related to the dot tool +#--------------------------------------------------------------------------- + +# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will +# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base or +# super classes. Setting the tag to NO turns the diagrams off. Note that this +# option is superseded by the HAVE_DOT option below. This is only a fallback. It is +# recommended to install and use dot, since it yields more powerful graphs. + +CLASS_DIAGRAMS = YES + +# If set to YES, the inheritance and collaboration graphs will hide +# inheritance and usage relations if the target is undocumented +# or is not a class. + +HIDE_UNDOC_RELATIONS = YES + +# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is +# available from the path. This tool is part of Graphviz, a graph visualization +# toolkit from AT&T and Lucent Bell Labs. The other options in this section +# have no effect if this option is set to NO (the default) + +HAVE_DOT = NO + +# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect inheritance relations. Setting this tag to YES will force the +# the CLASS_DIAGRAMS tag to NO. + +CLASS_GRAPH = YES + +# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen +# will generate a graph for each documented class showing the direct and +# indirect implementation dependencies (inheritance, containment, and +# class references variables) of the class with other documented classes. + +COLLABORATION_GRAPH = YES + +# If the UML_LOOK tag is set to YES doxygen will generate inheritance and +# collaboration diagrams in a style similar to the OMG's Unified Modeling +# Language. + +UML_LOOK = NO + +# If set to YES, the inheritance and collaboration graphs will show the +# relations between templates and their instances. + +TEMPLATE_RELATIONS = NO + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT +# tags are set to YES then doxygen will generate a graph for each documented +# file showing the direct and indirect include dependencies of the file with +# other documented files. + +INCLUDE_GRAPH = YES + +# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and +# HAVE_DOT tags are set to YES then doxygen will generate a graph for each +# documented header file showing the documented files that directly or +# indirectly include this file. + +INCLUDED_BY_GRAPH = YES + +# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will +# generate a call dependency graph for every global function or class method. +# Note that enabling this option will significantly increase the time of a run. +# So in most cases it will be better to enable call graphs for selected +# functions only using the \callgraph command. + +CALL_GRAPH = NO + +# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen +# will graphical hierarchy of all classes instead of a textual one. + +GRAPHICAL_HIERARCHY = YES + +# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images +# generated by dot. Possible values are png, jpg, or gif +# If left blank png will be used. + +DOT_IMAGE_FORMAT = png + +# The tag DOT_PATH can be used to specify the path where the dot tool can be +# found. If left blank, it is assumed the dot tool can be found on the path. + +DOT_PATH = + +# The DOTFILE_DIRS tag can be used to specify one or more directories that +# contain dot files that are included in the documentation (see the +# \dotfile command). + +DOTFILE_DIRS = + +# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_WIDTH = 1024 + +# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height +# (in pixels) of the graphs generated by dot. If a graph becomes larger than +# this value, doxygen will try to truncate the graph, so that it fits within +# the specified constraint. Beware that most browsers cannot cope with very +# large images. + +MAX_DOT_GRAPH_HEIGHT = 1024 + +# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the +# graphs generated by dot. A depth value of 3 means that only nodes reachable +# from the root by following a path via at most 3 edges will be shown. Nodes that +# lay further from the root node will be omitted. Note that setting this option to +# 1 or 2 may greatly reduce the computation time needed for large code bases. Also +# note that a graph may be further truncated if the graph's image dimensions are +# not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH and MAX_DOT_GRAPH_HEIGHT). +# If 0 is used for the depth value (the default), the graph is not depth-constrained. + +MAX_DOT_GRAPH_DEPTH = 0 + +# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will +# generate a legend page explaining the meaning of the various boxes and +# arrows in the dot generated graphs. + +GENERATE_LEGEND = YES + +# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will +# remove the intermediate dot files that are used to generate +# the various graphs. + +DOT_CLEANUP = YES + +#--------------------------------------------------------------------------- +# Configuration::additions related to the search engine +#--------------------------------------------------------------------------- + +# The SEARCHENGINE tag specifies whether or not a search engine should be +# used. If set to NO the values of all tags below this one will be ignored. + +SEARCHENGINE = NO diff --git a/src/3rdparty/libconninet/src/dbusdispatcher.cpp b/src/3rdparty/libconninet/src/dbusdispatcher.cpp new file mode 100644 index 0000000..7581982 --- /dev/null +++ b/src/3rdparty/libconninet/src/dbusdispatcher.cpp @@ -0,0 +1,611 @@ +/* * This file is part of conninet * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Aapo Makela + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include +#include +#include +#include +#include +#include +#include "dbusdispatcher.h" + +namespace Maemo { + +/*! + \class DBusDispatcher + + \brief DBusDispatcher is a class, which is able to send DBUS method call + messages and receive unicast signals from DBUS object. +*/ + +class DBusDispatcherPrivate +{ +public: + DBusDispatcherPrivate(const QString& service, + const QString& path, + const QString& interface, + const QString& signalPath) + : service(service), path(path), interface(interface), + signalPath(signalPath), connection(0) + { + memset(&signal_vtable, 0, sizeof(signal_vtable)); + } + + ~DBusDispatcherPrivate() + { + foreach(DBusPendingCall *call, pending_calls) { + dbus_pending_call_cancel(call); + dbus_pending_call_unref(call); + } + } + + QString service; + QString path; + QString interface; + QString signalPath; + struct DBusConnection *connection; + QList pending_calls; + struct DBusObjectPathVTable signal_vtable; +}; + +static bool constantVariantList(const QVariantList& variantList) { + // Special case, empty list == empty struct + if (variantList.isEmpty()) { + return false; + } else { + QVariant::Type type = variantList[0].type(); + // Iterate items in the list and check if they are same type + foreach(QVariant variant, variantList) { + if (variant.type() != type) { + return false; + } + } + } + return true; +} + +static QString variantToSignature(const QVariant& argument, + bool constantList = true) { + switch (argument.type()) { + case QVariant::Bool: + return "b"; + case QVariant::ByteArray: + return "ay"; + case QVariant::Char: + return "y"; + case QVariant::Int: + return "i"; + case QVariant::UInt: + return "u"; + case QVariant::StringList: + return "as"; + case QVariant::String: + return "s"; + case QVariant::LongLong: + return "x"; + case QVariant::ULongLong: + return "t"; + case QVariant::List: + { + QString signature; + QVariantList variantList = argument.toList(); + if (!constantList) { + signature += DBUS_STRUCT_BEGIN_CHAR_AS_STRING; + foreach(QVariant listItem, variantList) { + signature += variantToSignature(listItem); + } + signature += DBUS_STRUCT_END_CHAR_AS_STRING; + } else { + if (variantList.isEmpty()) + return ""; + signature = "a" + variantToSignature(variantList[0]); + } + + return signature; + } + default: + qDebug() << "Unsupported variant type: " << argument.type(); + break; + } + + return ""; +} + +static bool appendVariantToDBusMessage(const QVariant& argument, + DBusMessageIter *dbus_iter) { + int idx = 0; + DBusMessageIter array_iter; + QStringList str_list; + dbus_bool_t bool_data; + dbus_int32_t int32_data; + dbus_uint32_t uint32_data; + dbus_int64_t int64_data; + dbus_uint64_t uint64_data; + char *str_data; + char char_data; + + switch (argument.type()) { + + case QVariant::Bool: + bool_data = argument.toBool(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_BOOLEAN, + &bool_data); + break; + + case QVariant::ByteArray: + str_data = argument.toByteArray().data(); + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, + DBUS_TYPE_BYTE_AS_STRING, &array_iter); + dbus_message_iter_append_fixed_array(&array_iter, + DBUS_TYPE_BYTE, + &str_data, + argument.toByteArray().size()); + dbus_message_iter_close_container(dbus_iter, &array_iter); + break; + + case QVariant::Char: + char_data = argument.toChar().toAscii(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_BYTE, + &char_data); + break; + + case QVariant::Int: + int32_data = argument.toInt(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_INT32, + &int32_data); + break; + + case QVariant::String: + str_data = argument.toString().toLatin1().data(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_STRING, + &str_data); + break; + + case QVariant::StringList: + str_list = argument.toStringList(); + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, + "s", &array_iter); + for (idx = 0; idx < str_list.size(); idx++) { + str_data = str_list.at(idx).toLatin1().data(); + dbus_message_iter_append_basic(&array_iter, + DBUS_TYPE_STRING, + &str_data); + } + dbus_message_iter_close_container(dbus_iter, &array_iter); + break; + + case QVariant::UInt: + uint32_data = argument.toUInt(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_UINT32, + &uint32_data); + break; + + case QVariant::ULongLong: + uint64_data = argument.toULongLong(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_UINT64, + &uint64_data); + break; + + case QVariant::LongLong: + int64_data = argument.toLongLong(); + dbus_message_iter_append_basic(dbus_iter, DBUS_TYPE_INT64, + &int64_data); + break; + + case QVariant::List: + { + QVariantList variantList = argument.toList(); + bool constantList = constantVariantList(variantList); + DBusMessageIter array_iter; + + // List is mapped either as an DBUS array (all items same type) + // DBUS struct (variable types) depending on constantList + if (constantList) { + // Resolve the signature for the first item + QString signature = ""; + if (!variantList.isEmpty()) { + signature = variantToSignature( + variantList[0], + constantVariantList(variantList[0].toList())); + } + + // Mapped as DBUS array + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_ARRAY, + signature.toAscii(), + &array_iter); + + foreach(QVariant listItem, variantList) { + appendVariantToDBusMessage(listItem, &array_iter); + } + + dbus_message_iter_close_container(dbus_iter, &array_iter); + } else { + // Mapped as DBUS struct + dbus_message_iter_open_container(dbus_iter, DBUS_TYPE_STRUCT, + NULL, + &array_iter); + + foreach(QVariant listItem, variantList) { + appendVariantToDBusMessage(listItem, &array_iter); + } + + dbus_message_iter_close_container(dbus_iter, &array_iter); + } + + break; + } + default: + qDebug() << "Unsupported variant type: " << argument.type(); + break; + } + + return true; +} + +static QVariant getVariantFromDBusMessage(DBusMessageIter *iter) { + dbus_bool_t bool_data; + dbus_int32_t int32_data; + dbus_uint32_t uint32_data; + dbus_int64_t int64_data; + dbus_uint64_t uint64_data; + char *str_data; + char char_data; + int argtype = dbus_message_iter_get_arg_type(iter); + + switch (argtype) { + + case DBUS_TYPE_BOOLEAN: + { + dbus_message_iter_get_basic(iter, &bool_data); + QVariant variant((bool)bool_data); + return variant; + } + + case DBUS_TYPE_ARRAY: + { + // Handle all arrays here + int elem_type = dbus_message_iter_get_element_type(iter); + DBusMessageIter array_iter; + + dbus_message_iter_recurse(iter, &array_iter); + + if (elem_type == DBUS_TYPE_BYTE) { + QByteArray byte_array; + do { + dbus_message_iter_get_basic(&array_iter, &char_data); + byte_array.append(char_data); + } while (dbus_message_iter_next(&array_iter)); + QVariant variant(byte_array); + return variant; + } else if (elem_type == DBUS_TYPE_STRING) { + QStringList str_list; + do { + dbus_message_iter_get_basic(&array_iter, &str_data); + str_list.append(str_data); + } while (dbus_message_iter_next(&array_iter)); + QVariant variant(str_list); + return variant; + } else { + QVariantList variantList; + do { + variantList << getVariantFromDBusMessage(&array_iter); + } while (dbus_message_iter_next(&array_iter)); + QVariant variant(variantList); + return variant; + } + break; + } + + case DBUS_TYPE_BYTE: + { + dbus_message_iter_get_basic(iter, &char_data); + QChar ch(char_data); + QVariant variant(ch); + return variant; + } + + case DBUS_TYPE_INT32: + { + dbus_message_iter_get_basic(iter, &int32_data); + QVariant variant((int)int32_data); + return variant; + } + + case DBUS_TYPE_UINT32: + { + dbus_message_iter_get_basic(iter, &uint32_data); + QVariant variant((uint)uint32_data); + return variant; + } + + case DBUS_TYPE_STRING: + { + dbus_message_iter_get_basic(iter, &str_data); + QString str(str_data); + QVariant variant(str); + return variant; + } + + case DBUS_TYPE_INT64: + { + dbus_message_iter_get_basic(iter, &int64_data); + QVariant variant((qlonglong)int64_data); + return variant; + } + + case DBUS_TYPE_UINT64: + { + dbus_message_iter_get_basic(iter, &uint64_data); + QVariant variant((qulonglong)uint64_data); + return variant; + } + + case DBUS_TYPE_STRUCT: + { + // Handle all structs here + DBusMessageIter struct_iter; + dbus_message_iter_recurse(iter, &struct_iter); + + QVariantList variantList; + do { + variantList << getVariantFromDBusMessage(&struct_iter); + } while (dbus_message_iter_next(&struct_iter)); + QVariant variant(variantList); + return variant; + } + + default: + qDebug() << "Unsupported DBUS type: " << argtype; + } + + return QVariant(); +} + +static DBusHandlerResult signalHandler (DBusConnection *connection, + DBusMessage *message, + void *object_ref) { + (void)connection; + QString interface; + QString signal; + DBusDispatcher *dispatcher = (DBusDispatcher *)object_ref; + + if (dbus_message_get_type(message) == DBUS_MESSAGE_TYPE_SIGNAL) { + interface = dbus_message_get_interface(message); + signal = dbus_message_get_member(message); + + QList arglist; + DBusMessageIter dbus_iter; + + if (dbus_message_iter_init(message, &dbus_iter)) { + // Read return arguments + while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { + arglist << getVariantFromDBusMessage(&dbus_iter); + dbus_message_iter_next(&dbus_iter); + } + } + + dispatcher->emitSignalReceived(interface, signal, arglist); + return DBUS_HANDLER_RESULT_HANDLED; + } + (void)message; + return DBUS_HANDLER_RESULT_NOT_YET_HANDLED; +} + +DBusDispatcher::DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + QObject *parent) + : QObject(parent), + d_ptr(new DBusDispatcherPrivate(service, path, interface, path)) { + setupDBus(); +} + +DBusDispatcher::DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + const QString& signalPath, + QObject *parent) + : QObject(parent), + d_ptr(new DBusDispatcherPrivate(service, path, interface, signalPath)) { + setupDBus(); +} + +DBusDispatcher::~DBusDispatcher() +{ + if (d_ptr->connection) { + dbus_connection_close(d_ptr->connection); + dbus_connection_unref(d_ptr->connection); + } + delete d_ptr; +} + +void DBusDispatcher::setupDBus() +{ + d_ptr->connection = dbus_bus_get_private(DBUS_BUS_SYSTEM, NULL); + + if (d_ptr->connection == NULL) + qDebug() << "Unable to get DBUS connection!"; + else { + d_ptr->signal_vtable.message_function = signalHandler; + + dbus_connection_set_exit_on_disconnect(d_ptr->connection, FALSE); + dbus_connection_setup_with_g_main(d_ptr->connection, NULL); + dbus_connection_register_object_path(d_ptr->connection, + d_ptr->signalPath.toLatin1(), + &d_ptr->signal_vtable, + this); + } +} + +static DBusMessage *prepareDBusCall(const QString& service, + const QString& path, + const QString& interface, + const QString& method, + const QVariant& arg1 = QVariant(), + const QVariant& arg2 = QVariant(), + const QVariant& arg3 = QVariant(), + const QVariant& arg4 = QVariant(), + const QVariant& arg5 = QVariant(), + const QVariant& arg6 = QVariant(), + const QVariant& arg7 = QVariant(), + const QVariant& arg8 = QVariant()) +{ + DBusMessage *message = dbus_message_new_method_call(service.toLatin1(), + path.toLatin1(), + interface.toLatin1(), + method.toLatin1()); + DBusMessageIter dbus_iter; + + // Append variants to DBUS message + QList arglist; + if (arg1.isValid()) arglist << arg1; + if (arg2.isValid()) arglist << arg2; + if (arg3.isValid()) arglist << arg3; + if (arg4.isValid()) arglist << arg4; + if (arg5.isValid()) arglist << arg5; + if (arg6.isValid()) arglist << arg6; + if (arg7.isValid()) arglist << arg7; + if (arg8.isValid()) arglist << arg8; + + dbus_message_iter_init_append (message, &dbus_iter); + + while (!arglist.isEmpty()) { + QVariant argument = arglist.takeFirst(); + appendVariantToDBusMessage(argument, &dbus_iter); + } + + return message; +} + +QList DBusDispatcher::call(const QString& method, + const QVariant& arg1, + const QVariant& arg2, + const QVariant& arg3, + const QVariant& arg4, + const QVariant& arg5, + const QVariant& arg6, + const QVariant& arg7, + const QVariant& arg8) { + DBusMessageIter dbus_iter; + DBusMessage *message = prepareDBusCall(d_ptr->service, d_ptr->path, + d_ptr->interface, method, + arg1, arg2, arg3, arg4, arg5, + arg6, arg7, arg8); + DBusMessage *reply = dbus_connection_send_with_reply_and_block( + d_ptr->connection, + message, -1, NULL); + dbus_message_unref(message); + + QList replylist; + if (reply != NULL && dbus_message_iter_init(reply, &dbus_iter)) { + // Read return arguments + while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { + replylist << getVariantFromDBusMessage(&dbus_iter); + dbus_message_iter_next(&dbus_iter); + } + } + if (reply != NULL) dbus_message_unref(reply); + return replylist; +} + +class PendingCallInfo { +public: + QString method; + DBusDispatcher *dispatcher; + DBusDispatcherPrivate *priv; +}; + +static void freePendingCallInfo(void *memory) { + PendingCallInfo *info = (PendingCallInfo *)memory; + delete info; +} + +static void pendingCallFunction (DBusPendingCall *pending, + void *memory) { + PendingCallInfo *info = (PendingCallInfo *)memory; + QString errorStr; + QList replyList; + DBusMessage *reply = dbus_pending_call_steal_reply (pending); + + Q_ASSERT(reply != NULL); + + if (dbus_message_get_type(reply) == DBUS_MESSAGE_TYPE_ERROR) { + errorStr = dbus_message_get_error_name (reply); + } else { + DBusMessageIter dbus_iter; + dbus_message_iter_init(reply, &dbus_iter); + // Read return arguments + while (dbus_message_iter_get_arg_type (&dbus_iter) != DBUS_TYPE_INVALID) { + replyList << getVariantFromDBusMessage(&dbus_iter); + dbus_message_iter_next(&dbus_iter); + } + } + + info->priv->pending_calls.removeOne(pending); + info->dispatcher->emitCallReply(info->method, replyList, errorStr); + dbus_message_unref(reply); + dbus_pending_call_unref(pending); +} + +bool DBusDispatcher::callAsynchronous(const QString& method, + const QVariant& arg1, + const QVariant& arg2, + const QVariant& arg3, + const QVariant& arg4, + const QVariant& arg5, + const QVariant& arg6, + const QVariant& arg7, + const QVariant& arg8) { + DBusMessage *message = prepareDBusCall(d_ptr->service, d_ptr->path, + d_ptr->interface, method, + arg1, arg2, arg3, arg4, arg5, + arg6, arg7, arg8); + DBusPendingCall *call = NULL; + dbus_bool_t ret = dbus_connection_send_with_reply(d_ptr->connection, + message, &call, -1); + PendingCallInfo *info = new PendingCallInfo; + info->method = method; + info->dispatcher = this; + info->priv = d_ptr; + + dbus_pending_call_set_notify(call, pendingCallFunction, info, freePendingCallInfo); + d_ptr->pending_calls.append(call); + return (bool)ret; +} + +void DBusDispatcher::emitSignalReceived(const QString& interface, + const QString& signal, + const QList& args) { + emit signalReceived(interface, signal, args); } + +void DBusDispatcher::emitCallReply(const QString& method, + const QList& args, + const QString& error) { + emit callReply(method, args, error); } + +void DBusDispatcher::synchronousDispatch(int timeout_ms) +{ + dbus_connection_read_write_dispatch(d_ptr->connection, timeout_ms); +} + +} // Maemo namespace + diff --git a/src/3rdparty/libconninet/src/dbusdispatcher.h b/src/3rdparty/libconninet/src/dbusdispatcher.h new file mode 100644 index 0000000..2f71b6f --- /dev/null +++ b/src/3rdparty/libconninet/src/dbusdispatcher.h @@ -0,0 +1,91 @@ +/* * This file is part of conn-dui-settings-inet * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Aapo Makela + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef DBUSDISPATCHER_H +#define DBUSDISPATCHER_H + +#include +#include + +namespace Maemo { + +class DBusDispatcherPrivate; +class DBusDispatcher : public QObject +{ + Q_OBJECT + +public: + DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + QObject *parent = 0); + DBusDispatcher(const QString& service, + const QString& path, + const QString& interface, + const QString& signalPath, + QObject *parent = 0); + ~DBusDispatcher(); + + QList call(const QString& method, + const QVariant& arg1 = QVariant(), + const QVariant& arg2 = QVariant(), + const QVariant& arg3 = QVariant(), + const QVariant& arg4 = QVariant(), + const QVariant& arg5 = QVariant(), + const QVariant& arg6 = QVariant(), + const QVariant& arg7 = QVariant(), + const QVariant& arg8 = QVariant()); + bool callAsynchronous(const QString& method, + const QVariant& arg1 = QVariant(), + const QVariant& arg2 = QVariant(), + const QVariant& arg3 = QVariant(), + const QVariant& arg4 = QVariant(), + const QVariant& arg5 = QVariant(), + const QVariant& arg6 = QVariant(), + const QVariant& arg7 = QVariant(), + const QVariant& arg8 = QVariant()); + void emitSignalReceived(const QString& interface, + const QString& signal, + const QList& args); + void emitCallReply(const QString& method, + const QList& args, + const QString& error = ""); + void synchronousDispatch(int timeout_ms); + +Q_SIGNALS: + void signalReceived(const QString& interface, + const QString& signal, + const QList& args); + void callReply(const QString& method, + const QList& args, + const QString& error); + +protected: + void setupDBus(); + +private: + DBusDispatcherPrivate *d_ptr; +}; + +} // Maemo namespace + +#endif diff --git a/src/3rdparty/libconninet/src/iapconf.cpp b/src/3rdparty/libconninet/src/iapconf.cpp new file mode 100644 index 0000000..2e77fa5 --- /dev/null +++ b/src/3rdparty/libconninet/src/iapconf.cpp @@ -0,0 +1,299 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Aapo Makela + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include +#include +#include + +#include "iapconf.h" + +#define QSTRING_TO_CONST_CSTR(str) \ + str.toUtf8().constData() + +namespace Maemo { + +class IAPConfPrivate { +public: + ConnSettings *settings; + + ConnSettingsValue *variantToValue(const QVariant &variant); + QVariant valueToVariant(ConnSettingsValue *value); +}; + +ConnSettingsValue *IAPConfPrivate::variantToValue(const QVariant &variant) +{ + // Convert variant to ConnSettingsValue + ConnSettingsValue *value = conn_settings_value_new(); + if (value == 0) { + qWarning("IAPConf: Unable to create new ConnSettingsValue"); + return 0; + } + + switch(variant.type()) { + + case QVariant::Invalid: + value->type = CONN_SETTINGS_VALUE_INVALID; + break; + + case QVariant::String: { + char *valueStr = strdup(QSTRING_TO_CONST_CSTR(variant.toString())); + value->type = CONN_SETTINGS_VALUE_STRING; + value->value.string_val = valueStr; + break; + } + + case QVariant::Int: + value->type = CONN_SETTINGS_VALUE_INT; + value->value.int_val = variant.toInt(); + break; + + case QMetaType::Float: + case QVariant::Double: + value->type = CONN_SETTINGS_VALUE_DOUBLE; + value->value.double_val = variant.toDouble(); + break; + + case QVariant::Bool: + value->type = CONN_SETTINGS_VALUE_BOOL; + value->value.bool_val = variant.toBool() ? 1 : 0; + break; + + case QVariant::ByteArray: { + QByteArray array = variant.toByteArray(); + value->type = CONN_SETTINGS_VALUE_BYTE_ARRAY; + value->value.byte_array.len = array.size(); + value->value.byte_array.val = (unsigned char *)malloc(array.size()); + memcpy(value->value.byte_array.val, array.constData(), array.size()); + break; + } + + case QVariant::List: { + QVariantList list = variant.toList(); + ConnSettingsValue **list_val = (ConnSettingsValue **)malloc( + (list.size() + 1) * sizeof(ConnSettingsValue *)); + + for (int idx = 0; idx < list.size(); idx++) { + list_val[idx] = variantToValue(list.at(idx)); + } + list_val[list.size()] = 0; + + value->type = CONN_SETTINGS_VALUE_LIST; + value->value.list_val = list_val; + break; + } + + default: + qWarning("IAPConf: Can not handle QVariant of type %d", + variant.type()); + conn_settings_value_destroy(value); + return 0; + } + + return value; +} + +QVariant IAPConfPrivate::valueToVariant(ConnSettingsValue *value) +{ + if (value == 0 || value->type == CONN_SETTINGS_VALUE_INVALID) { + return QVariant(); + } + + switch(value->type) { + + case CONN_SETTINGS_VALUE_BOOL: + return QVariant(value->value.bool_val ? true : false); + + case CONN_SETTINGS_VALUE_STRING: + return QVariant(QString(value->value.string_val)); + + case CONN_SETTINGS_VALUE_DOUBLE: + return QVariant(value->value.double_val); + + case CONN_SETTINGS_VALUE_INT: + return QVariant(value->value.int_val); + + case CONN_SETTINGS_VALUE_LIST: { + // At least with GConf backend connsettings returns byte array as list + // of ints, first check for that case + if (value->value.list_val && value->value.list_val[0]) { + bool canBeConvertedToByteArray = true; + for (int idx = 0; value->value.list_val[idx]; idx++) { + ConnSettingsValue *val = value->value.list_val[idx]; + if (val->type != CONN_SETTINGS_VALUE_INT + || val->value.int_val > 255 + || val->value.int_val < 0) { + canBeConvertedToByteArray = false; + break; + } + } + + if (canBeConvertedToByteArray) { + QByteArray array; + for (int idx = 0; value->value.list_val[idx]; idx++) { + array.append(value->value.list_val[idx]->value.int_val); + } + return array; + } + + // Create normal list + QVariantList list; + for (int idx = 0; value->value.list_val[idx]; idx++) { + list.append(valueToVariant(value->value.list_val[idx])); + } + return list; + } + } + + case CONN_SETTINGS_VALUE_BYTE_ARRAY: + return QByteArray::fromRawData((char *)value->value.byte_array.val, + value->value.byte_array.len); + + default: + return QVariant(); + } +} + +// Public class implementation + +IAPConf::IAPConf(const QString &iap_id) + : d_ptr(new IAPConfPrivate) +{ + d_ptr->settings = conn_settings_open(CONN_SETTINGS_CONNECTION, + QSTRING_TO_CONST_CSTR(iap_id)); + if (d_ptr->settings == 0) { + qWarning("IAPConf: Unable to open ConnSettings for %s", + QSTRING_TO_CONST_CSTR(iap_id)); + } +} + +IAPConf::~IAPConf() +{ + conn_settings_close(d_ptr->settings); + delete d_ptr; +} + +void IAPConf::setValue(const QString& key, const QVariant& value) +{ + // Invalid value means unsetting the given key + if (!value.isValid()) { + int err = conn_settings_unset(d_ptr->settings, + QSTRING_TO_CONST_CSTR(key)); + if (err != CONN_SETTINGS_E_NO_ERROR) { + qWarning("IAPConf: unable to unset key %s: %s", + QSTRING_TO_CONST_CSTR(key), + conn_settings_error_text((ConnSettingsError)err)); + } + return; + } + + // Convert value to ConnSettingsValue + ConnSettingsValue *val = d_ptr->variantToValue(value); + if (val == 0) return; + + // Set value and handle errors + int error = conn_settings_set(d_ptr->settings, + QSTRING_TO_CONST_CSTR(key), + val); + if (error != CONN_SETTINGS_E_NO_ERROR) { + qWarning("IAPConf: error in setting key %s: %s", + QSTRING_TO_CONST_CSTR(key), + conn_settings_error_text((ConnSettingsError)error)); + } + + // Destroy value + conn_settings_value_destroy(val); + return; +} + +void IAPConf::set(const QString& key1, const QVariant& value1, + const QString& key2, const QVariant& value2, + const QString& key3, const QVariant& value3, + const QString& key4, const QVariant& value4, + const QString& key5, const QVariant& value5, + const QString& key6, const QVariant& value6, + const QString& key7, const QVariant& value7, + const QString& key8, const QVariant& value8, + const QString& key9, const QVariant& value9, + const QString& key10, const QVariant& value10) +{ + if (!key1.isEmpty()) setValue(key1, value1); + if (!key2.isEmpty()) setValue(key2, value2); + if (!key3.isEmpty()) setValue(key3, value3); + if (!key4.isEmpty()) setValue(key4, value4); + if (!key5.isEmpty()) setValue(key5, value5); + if (!key6.isEmpty()) setValue(key6, value6); + if (!key7.isEmpty()) setValue(key7, value7); + if (!key8.isEmpty()) setValue(key8, value8); + if (!key9.isEmpty()) setValue(key9, value9); + if (!key10.isEmpty()) setValue(key10, value10); +} + +QVariant IAPConf::value(const QString& key) const +{ + ConnSettingsValue *val = conn_settings_get(d_ptr->settings, + QSTRING_TO_CONST_CSTR(key)); + + QVariant variant = d_ptr->valueToVariant(val); + conn_settings_value_destroy(val); + return variant; +} + +void IAPConf::clear(const char *default_path) +{ + Q_UNUSED(default_path); // default path is unused + + int error = conn_settings_remove(d_ptr->settings); + if (error != CONN_SETTINGS_E_NO_ERROR) { + qWarning("IAPConf: Error when removing IAP: %s", + conn_settings_error_text((ConnSettingsError)error)); + } +} + +void IAPConf::clearAll() +{ + ConnSettings *settings = conn_settings_open(CONN_SETTINGS_CONNECTION, + NULL); + conn_settings_remove(settings); + conn_settings_close(settings); +} + + +void IAPConf::getAll(QList &all_iaps, bool return_path) +{ + Q_UNUSED(return_path); // We don't use return path currently + + // Go through all available connections and add them to the list + char **ids = conn_settings_list_ids(CONN_SETTINGS_CONNECTION); + if (ids == 0) { + // No ids found - nothing to do + return; + } + + for (int idx = 0; ids[idx]; idx++) { + all_iaps.append(QString(ids[idx])); + free(ids[idx]); + } + free(ids); +} + + +} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/iapconf.h b/src/3rdparty/libconninet/src/iapconf.h new file mode 100644 index 0000000..57c0856 --- /dev/null +++ b/src/3rdparty/libconninet/src/iapconf.h @@ -0,0 +1,84 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Aapo Makela + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef IAPCONF_H +#define IAPCONF_H + +#include +#include + +namespace Maemo { + +class IAPConfPrivate; +class IAPConf { +public: + IAPConf(const QString &iap_id); + virtual ~IAPConf(); + + /** + Convenience method for setting multiple IAP values with one call. + */ + void set(const QString& key1, const QVariant& value1, + const QString& key2 = "", const QVariant& value2 = QVariant(), + const QString& key3 = "", const QVariant& value3 = QVariant(), + const QString& key4 = "", const QVariant& value4 = QVariant(), + const QString& key5 = "", const QVariant& value5 = QVariant(), + const QString& key6 = "", const QVariant& value6 = QVariant(), + const QString& key7 = "", const QVariant& value7 = QVariant(), + const QString& key8 = "", const QVariant& value8 = QVariant(), + const QString& key9 = "", const QVariant& value9 = QVariant(), + const QString& key10 = "", const QVariant& value10 = QVariant()); + + /** + Set one IAP value. + */ + void setValue(const QString& key, const QVariant& value); + + /** + Get one IAP value. + */ + QVariant value(const QString& key) const; + + /** + Clear this IAP from GConf + */ + void clear(const char *default_path=0); + + /** + Clear all IAP specific information from GConf (including all IAPs). + DO NOT USE THIS FUNCTION IN ANYWHERE ELSE EXCEPT IN TEST CODE! + */ + void clearAll(); + + /** + Return all the IAPs found in the system. If return_path is true, + then do not strip the IAP path away. + */ + static void getAll(QList &all_iaps, bool return_path=false); + +private: + IAPConfPrivate *d_ptr; +}; + +} // namespace Maemo + +#endif diff --git a/src/3rdparty/libconninet/src/iapmonitor.cpp b/src/3rdparty/libconninet/src/iapmonitor.cpp new file mode 100644 index 0000000..c44cbc8 --- /dev/null +++ b/src/3rdparty/libconninet/src/iapmonitor.cpp @@ -0,0 +1,110 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include + +#include +#include "iapmonitor.h" + +namespace Maemo { + + +void conn_settings_notify_func (ConnSettingsType type, + const char *id, + const char *key, + ConnSettingsValue *value, + void *user_data); + +class IAPMonitorPrivate { +private: + IAPMonitor *monitor; + ConnSettings *settings; + +public: + + IAPMonitorPrivate(IAPMonitor *monitor) + : monitor(monitor) + { + settings = conn_settings_open(CONN_SETTINGS_CONNECTION, NULL); + conn_settings_add_notify( + settings, + (ConnSettingsNotifyFunc *)conn_settings_notify_func, + this); + } + + ~IAPMonitorPrivate() + { + conn_settings_del_notify(settings); + conn_settings_close(settings); + } + + void iapAdded(const QString &iap) + { + monitor->iapAdded(iap); + } + + void iapRemoved(const QString &iap) + { + monitor->iapRemoved(iap); + } +}; + +void conn_settings_notify_func (ConnSettingsType type, + const char *id, + const char *key, + ConnSettingsValue *value, + void *user_data) +{ + if (type != CONN_SETTINGS_CONNECTION) return; + IAPMonitorPrivate *priv = (IAPMonitorPrivate *)user_data; + + QString iapId(key); + iapId = iapId.split("/")[0]; + if (value != 0) { + priv->iapAdded(iapId); + } else if (iapId == QString(key)) { + // IAP is removed only when the directory gets removed + priv->iapRemoved(iapId); + } +} + +IAPMonitor::IAPMonitor() + : d_ptr(new IAPMonitorPrivate(this)) +{ +} + +IAPMonitor::~IAPMonitor() +{ + delete d_ptr; +} + +void IAPMonitor::iapAdded(const QString &id) +{ + // By default do nothing +} + +void IAPMonitor::iapRemoved(const QString &id) +{ + // By default do nothing +} + +} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/iapmonitor.h b/src/3rdparty/libconninet/src/iapmonitor.h new file mode 100644 index 0000000..558f23e --- /dev/null +++ b/src/3rdparty/libconninet/src/iapmonitor.h @@ -0,0 +1,48 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef IAPMONITOR_H +#define IAPMONITOR_H + +#include + +namespace Maemo { + +class IAPMonitorPrivate; +class IAPMonitor { +public: + IAPMonitor(); + ~IAPMonitor(); + +protected: + virtual void iapAdded(const QString &id); + virtual void iapRemoved(const QString &id); + +private: + IAPMonitorPrivate *d_ptr; + Q_DECLARE_PRIVATE(IAPMonitor); +}; + +} // namespace Maemo + +#endif // IAPMONITOR_H + diff --git a/src/3rdparty/libconninet/src/maemo_icd.cpp b/src/3rdparty/libconninet/src/maemo_icd.cpp new file mode 100644 index 0000000..026241c --- /dev/null +++ b/src/3rdparty/libconninet/src/maemo_icd.cpp @@ -0,0 +1,1316 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include +#include "maemo_icd.h" +#include +#include +#include +#include +#include +#include +#include + +#include +#include +#include + +namespace Maemo { + +#undef PRINT_DEBUGINFO +#ifdef PRINT_DEBUGINFO + static FILE *fdebug = NULL; +#define PDEBUG(fmt, args...) \ + do { \ + struct timeval tv; \ + gettimeofday(&tv, 0); \ + fprintf(fdebug, "DEBUG[%d]:%ld.%ld:%s:%s():%d: " fmt, \ + getpid(), \ + tv.tv_sec, tv.tv_usec, \ + __FILE__, __FUNCTION__, __LINE__, args); \ + fflush(fdebug); \ + } while(0) +#else +#define PDEBUG(fmt...) +#endif + + +/* Reference counting singleton class that creates a single connection + * to icd so that icd reference counting works as expected. This is + * needed because DBusDispatcher uses private dbus connections + * which come and go and icd cannot use that information to + * determine whether application quit or not. So we create one + * persistent connection that is only teared down when application + * quits or calls disconnect() + */ +class IcdRefCounting +{ +public: + IcdRefCounting() : first_call(true) { } + void setup(enum icd_connection_flags flag); + void cleanup(); + +private: + bool first_call; + struct DBusConnection *connection; +}; + +Q_GLOBAL_STATIC(IcdRefCounting, icdRefCounting); + + +void IcdRefCounting::setup(enum icd_connection_flags flag) +{ + if (first_call) { + DBusMessage *msg = NULL; + + connection = dbus_bus_get_private(DBUS_BUS_SYSTEM, NULL); + dbus_connection_set_exit_on_disconnect(connection, FALSE); + dbus_connection_setup_with_g_main(connection, NULL); + + msg = dbus_message_new_method_call(ICD_DBUS_API_INTERFACE, + ICD_DBUS_API_PATH, + ICD_DBUS_API_INTERFACE, + ICD_DBUS_API_CONNECT_REQ); + if (msg == NULL) + goto out; + + if (!dbus_message_append_args(msg, + DBUS_TYPE_UINT32, &flag, + DBUS_TYPE_INVALID)) + goto out; + + if (!dbus_connection_send_with_reply(connection, msg, + NULL, 60*1000)) + goto out; + + first_call = false; + return; + + out: + dbus_connection_close(connection); + dbus_connection_unref(connection); + } +} + +void IcdRefCounting::cleanup() +{ + if (!first_call) { + dbus_connection_close(connection); + dbus_connection_unref(connection); + first_call = true; + } +} + + +class IcdPrivate +{ +public: + IcdPrivate(Icd *myfriend) + { + init(10000, IcdNewDbusInterface, myfriend); + } + + IcdPrivate(unsigned int timeout, Icd *myfriend) + { + init(timeout, IcdNewDbusInterface, myfriend); + } + + IcdPrivate(unsigned int timeout, IcdDbusInterfaceVer ver, Icd *myfriend) + { + /* Note that the old Icd interface is currently disabled and + * the new one is always used. + */ + init(timeout, IcdNewDbusInterface, myfriend); + } + + ~IcdPrivate() + { + QObject::disconnect(mDBus, + SIGNAL(signalReceived(const QString&, + const QString&, + const QList&)), + icd, + SLOT(icdSignalReceived(const QString&, + const QString&, + const QList&))); + + QObject::disconnect(mDBus, + SIGNAL(callReply(const QString&, + const QList&, + const QString&)), + icd, + SLOT(icdCallReply(const QString&, + const QList&, + const QString&))); + + delete mDBus; + mDBus = 0; + } + + /* Icd2 dbus API functions */ + QStringList scan(icd_scan_request_flags flags, + QStringList &network_types, + QList& scan_results, + QString& error); + void scanCancel(); + bool connect(icd_connection_flags flags, IcdConnectResult& result); + bool connect(icd_connection_flags flags, QList& params, + IcdConnectResult& result); + bool connect(icd_connection_flags flags, QString& iap, QString& result); + void select(uint flags); + void disconnect(uint connect_flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id); + void disconnect(uint connect_flags); + + uint state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult &state_result); + uint statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result); + uint addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result); + + uint state(QList& state_results); + uint state_non_blocking(QList& state_results); + uint statistics(QList& stats_results); + uint addrinfo(QList& addr_results); + uint addrinfo_non_blocking(QList& addr_results); + + void signalReceived(const QString& interface, + const QString& signal, + const QList& args); + void callReply(const QString& method, + const QList& args, + const QString& error); + + QString error() { return mError; } + +public: + DBusDispatcher *mDBus; + QString mMethod; + QString mInterface; + QString mSignal; + QString mError; + QList mArgs; + QList receivedSignals; + unsigned int timeout; + IcdDbusInterfaceVer icd_dbus_version; + Icd *icd; + + void init(unsigned int dbus_timeout, IcdDbusInterfaceVer ver, + Icd *myfriend) + { + if (ver == IcdNewDbusInterface) { + mDBus = new DBusDispatcher(ICD_DBUS_API_INTERFACE, + ICD_DBUS_API_PATH, + ICD_DBUS_API_INTERFACE); + } else { + mDBus = new DBusDispatcher(ICD_DBUS_SERVICE, + ICD_DBUS_PATH, + ICD_DBUS_INTERFACE); + } + icd_dbus_version = ver; + + /* This connect has a side effect as it means that only one + * Icd object can exists in one time. This should be fixed! + */ + QObject::connect(mDBus, + SIGNAL(signalReceived(const QString&, + const QString&, + const QList&)), + myfriend, + SLOT(icdSignalReceived(const QString&, + const QString&, + const QList&))); + + QObject::connect(mDBus, + SIGNAL(callReply(const QString&, + const QList&, + const QString&)), + myfriend, + SLOT(icdCallReply(const QString&, + const QList&, + const QString&))); + + icd = myfriend; + timeout = dbus_timeout; + +#ifdef PRINT_DEBUGINFO + if (!fdebug) { + fdebug = fopen("/tmp/maemoicd.log", "a+"); + } + PDEBUG("created %s\n", "IcdPrivate"); +#endif + } + + void clearState() + { + mMethod.clear(); + mInterface.clear(); + mSignal.clear(); + mError.clear(); + mArgs.clear(); + receivedSignals.clear(); + } + + bool doConnect(IcdConnectResult& result); + bool doConnect(QString& result); + bool doState(); +}; + + +void IcdPrivate::signalReceived(const QString& interface, + const QString& signal, + const QList& args) +{ + // Signal handler, which simply records what has been signalled + mInterface = interface; + mSignal = signal; + mArgs = args; + + //qDebug() << "signal" << signal << "received:" << args; + receivedSignals << QVariant(interface) << QVariant(signal) << QVariant(args); +} + + +void IcdPrivate::callReply(const QString& method, + const QList& /*args*/, + const QString& error) +{ + mMethod = method; + mError = error; +} + + +static void get_scan_result(QList& args, + IcdScanResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.status = args[i++].toUInt(); + ret.timestamp = args[i++].toUInt(); + ret.scan.service_type = args[i++].toString(); + ret.service_name = args[i++].toString(); + ret.scan.service_attrs = args[i++].toUInt(); + ret.scan.service_id = args[i++].toString(); + ret.service_priority = args[i++].toInt(); + ret.scan.network_type = args[i++].toString(); + ret.network_name = args[i++].toString(); + ret.scan.network_attrs = args[i++].toUInt(); + ret.scan.network_id = args[i++].toByteArray(); + ret.network_priority = args[i++].toInt(); + ret.signal_strength = args[i++].toInt(); + ret.station_id = args[i++].toString(); + ret.signal_dB = args[i++].toInt(); +} + + +static void get_connect_result(QList& args, + IcdConnectResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.connect.service_type = args[i++].toString(); + ret.connect.service_attrs = args[i++].toInt(); + ret.connect.service_id = args[i++].toString(); + ret.connect.network_type = args[i++].toString(); + ret.connect.network_attrs = args[i++].toInt(); + ret.connect.network_id = args[i++].toByteArray(); + ret.status = args[i++].toInt(); +} + + +QStringList IcdPrivate::scan(icd_scan_request_flags flags, + QStringList &network_types, + QList& scan_results, + QString& error) +{ + QStringList scanned_types; + QTimer timer; + QVariant reply; + QVariantList vl; + bool last_result = false; + IcdScanResult result; + int all_waited; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_SCAN_REQ, (uint)flags); + if (reply.type() != QVariant::List) + return scanned_types; + vl = reply.toList(); + if (vl.isEmpty()) { + error = "Scan did not return anything."; + return scanned_types; + } + reply = vl.first(); + scanned_types = reply.toStringList(); + //qDebug() << "Scanning:" << scanned_types; + all_waited = scanned_types.size(); + + timer.setSingleShot(true); + timer.start(timeout); + + scan_results.clear(); + while (!last_result) { + while (timer.isActive() && mInterface.isEmpty() && mError.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + //qDebug() << "Timeout happened"; + break; + } + + if (mSignal != ICD_DBUS_API_SCAN_SIG) { + //qDebug() << "Received" << mSignal << "while waiting" << ICD_DBUS_API_SCAN_SIG << ", ignoring"; + mInterface.clear(); + continue; + } + + if (mError.isEmpty()) { + QString msgInterface = receivedSignals.takeFirst().toString(); + QString msgSignal = receivedSignals.takeFirst().toString(); + QList msgArgs = receivedSignals.takeFirst().toList(); + //qDebug() << "Signal" << msgSignal << "received."; + //qDebug() << "Params:" << msgArgs; + + while (!msgSignal.isEmpty()) { + get_scan_result(msgArgs, result); + +#if 0 + qDebug() << "Received: " << + "status =" << result.status << + ", timestamp =" << result.timestamp << + ", service_type =" << result.scan.service_type << + ", service_name =" << result.service_name << + ", service_attrs =" << result.scan.service_attrs << + ", service_id =" << result.scan.service_id << + ", service_priority =" << result.service_priority << + ", network_type =" << result.scan.network_type << + ", network_name =" << result.network_name << + ", network_attrs =" << result.scan.network_attrs << + ", network_id =" << "-" << + ", network_priority =" << result.network_priority << + ", signal_strength =" << result.signal_strength << + ", station_id =" << result.station_id << + ", signal_dB =" << result.signal_dB; +#endif + + if (result.status == ICD_SCAN_COMPLETE) { + //qDebug() << "waited =" << all_waited; + if (--all_waited == 0) { + last_result = true; + break; + } + } else + scan_results << result; + + if (receivedSignals.isEmpty()) + break; + + msgInterface = receivedSignals.takeFirst().toString(); + msgSignal = receivedSignals.takeFirst().toString(); + msgArgs = receivedSignals.takeFirst().toList(); + } + mInterface.clear(); + + } else { + qWarning() << "Error while scanning:" << mError; + break; + } + } + timer.stop(); + + error = mError; + return scanned_types; +} + + +void IcdPrivate::scanCancel() +{ + mDBus->call(ICD_DBUS_API_SCAN_CANCEL); +} + + +bool IcdPrivate::doConnect(IcdConnectResult& result) +{ + QTimer timer; + bool status = false; + + timer.setSingleShot(true); + timer.start(timeout); + + //qDebug() << "Waiting" << ICD_DBUS_API_CONNECT_SIG << "signal"; + + while (timer.isActive() && mInterface.isEmpty() && + mSignal != ICD_DBUS_API_CONNECT_SIG && + mError.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + timer.stop(); + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + get_connect_result(mArgs, result); + status = true; + } else + status = false; + } else + status = false; + + return status; +} + + +bool IcdPrivate::connect(icd_connection_flags flags, IcdConnectResult& result) +{ + clearState(); + //mDBus->callAsynchronous(ICD_DBUS_API_CONNECT_REQ, (uint)flags); + mDBus->call(ICD_DBUS_API_CONNECT_REQ, (uint)flags); + icdRefCounting()->setup(flags); + return doConnect(result); +} + + +bool IcdPrivate::connect(icd_connection_flags flags, QList& params, + IcdConnectResult& result) +{ + QVariantList varlist; + QVariantList varlist2; + + foreach (ConnectParams param, params) { + QVariantList items; + + items.append(QVariant(param.connect.service_type)); + items.append(QVariant(param.connect.service_attrs)); + items.append(QVariant(param.connect.service_id)); + items.append(QVariant(param.connect.network_type)); + items.append(QVariant(param.connect.network_attrs)); + items.append(QVariant(param.connect.network_id)); + + varlist.append(items); + } + + varlist2.append(QVariant(varlist)); + + clearState(); + //mDBus->callAsynchronous(ICD_DBUS_API_CONNECT_REQ, (uint)flags, varlist2); + mDBus->call(ICD_DBUS_API_CONNECT_REQ, (uint)flags, varlist2); + icdRefCounting()->setup(flags); + return doConnect(result); +} + + +bool IcdPrivate::doConnect(QString& ret) +{ + QTimer timer; + bool status = false; + + timer.setSingleShot(true); + timer.start(timeout); + + while (timer.isActive() && mInterface.isEmpty() && + mError.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + timer.stop(); + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + status = true; + //ret = mArgs[0]; // TODO correctly + } else + status = false; + } else + status = false; + + return status; +} + + +bool IcdPrivate::connect(icd_connection_flags flags, QString& iap, QString& result) +{ + clearState(); + //mDBus->callAsynchronous(ICD_CONNECT_REQ, iap, (uint)flags); + mDBus->call(ICD_CONNECT_REQ, iap, (uint)flags); + icdRefCounting()->setup(flags); + return doConnect(result); +} + + +void IcdPrivate::select(uint flags) +{ + mDBus->call(ICD_DBUS_API_SELECT_REQ, flags); +} + + +void IcdPrivate::disconnect(uint flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id) +{ + clearState(); + mDBus->call(ICD_DBUS_API_DISCONNECT_REQ, flags, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + icdRefCounting()->cleanup(); +} + + +void IcdPrivate::disconnect(uint flags) +{ + clearState(); + mDBus->call(ICD_DBUS_API_DISCONNECT_REQ, flags); + icdRefCounting()->cleanup(); +} + + +static void get_state_all_result(QList& args, + IcdStateResult& ret) +{ + int i=0; + + ret.params.service_type = args[i++].toString(); + ret.params.service_attrs = args[i++].toUInt(); + ret.params.service_id = args[i++].toString(); + ret.params.network_type = args[i++].toString(); + ret.params.network_attrs = args[i++].toUInt(); + ret.params.network_id = args[i++].toByteArray(); + ret.error = args[i++].toString(); + ret.state = args[i++].toInt(); +} + + +static void get_state_all_result2(QList& args, + IcdStateResult& ret) +{ + int i=0; + + ret.params.network_type = args[i++].toString(); + ret.state = args[i++].toInt(); + + // Initialize the other values so that the caller can + // notice we only returned partial status + ret.params.service_type = QString(); + ret.params.service_attrs = 0; + ret.params.service_id = QString(); + ret.params.network_attrs = 0; + ret.params.network_id = QByteArray(); + ret.error = QString(); +} + + +uint IcdPrivate::state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult& state_result) +{ + QTimer timer; + QVariant reply; + uint total_signals; + QVariantList vl; + + clearState(); + + reply = mDBus->call(ICD_DBUS_API_STATE_REQ, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + total_signals = reply.toUInt(); + if (!total_signals) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + if (mSignal != ICD_DBUS_API_STATE_SIG) { + mInterface.clear(); + continue; + } + } + + timer.stop(); + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + if (mArgs.size()>2) + get_state_all_result(mArgs, state_result); + else { + // We are not connected as we did not get the status we asked + return 0; + } + } + } else { + qWarning() << "Error:" << mError; + } + + // The returned value should be one because we asked for one state + return total_signals; +} + + +uint IcdPrivate::state_non_blocking(QList& state_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdStateResult result; + + PDEBUG("%s\n", "non blocking state"); + + clearState(); + reply = mDBus->call(ICD_DBUS_API_STATE_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + state_results.clear(); + mError.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_STATE_SIG) { + continue; + } + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + if (mArgs.size()==2) + get_state_all_result2(mArgs, result); + else + get_state_all_result(mArgs, result); + state_results << result; + } + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + + PDEBUG("total_signals=%d\n", total_signals); + return total_signals; +} + + +/* Special version of the state() call which does not call event loop. + * Needed in order to fix NB#175098 where Qt4.7 webkit crashes because event + * loop is run when webkit does not expect it. This function is called from + * bearer management API syncStateWithInterface() in QNetworkSession + * constructor. + */ +uint IcdPrivate::state(QList& state_results) +{ + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdStateResult result; + time_t started; + int timeout_secs = timeout / 1000; + + PDEBUG("%s\n", "state_results"); + + clearState(); + reply = mDBus->call(ICD_DBUS_API_STATE_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + started = time(0); + state_results.clear(); + mError.clear(); + while (signals_left) { + mInterface.clear(); + while ((time(0)<=(started+timeout_secs)) && mInterface.isEmpty()) { + mDBus->synchronousDispatch(1000); + } + + if (time(0)>(started+timeout_secs)) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_STATE_SIG) { + continue; + } + + if (mError.isEmpty()) { + if (!mArgs.isEmpty()) { + if (mArgs.size()==2) + get_state_all_result2(mArgs, result); + else + get_state_all_result(mArgs, result); + state_results << result; + } + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + + PDEBUG("total_signals=%d\n", total_signals); + return total_signals; +} + + +static void get_statistics_all_result(QList& args, + IcdStatisticsResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.params.service_type = args[i++].toString(); + ret.params.service_attrs = args[i++].toUInt(); + ret.params.service_id = args[i++].toString(); + ret.params.network_type = args[i++].toString(); + ret.params.network_attrs = args[i++].toUInt(); + ret.params.network_id = args[i++].toByteArray(); + ret.time_active = args[i++].toUInt(); + ret.signal_strength = (enum icd_nw_levels)args[i++].toUInt(); + ret.bytes_sent = args[i++].toUInt(); + ret.bytes_received = args[i++].toUInt(); +} + + +uint IcdPrivate::statistics(QList& stats_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdStatisticsResult result; + + clearState(); + reply = mDBus->call(ICD_DBUS_API_STATISTICS_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + if (reply.type() != QVariant::UInt) + return 0; + signals_left = total_signals = reply.toUInt(); + + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + stats_results.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_STATISTICS_SIG) { + continue; + } + + if (mError.isEmpty()) { + get_statistics_all_result(mArgs, result); + stats_results << result; + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + + return total_signals; +} + + +uint IcdPrivate::statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result) +{ + QTimer timer; + QVariant reply; + uint total_signals; + QVariantList vl; + + clearState(); + + reply = mDBus->call(ICD_DBUS_API_STATISTICS_REQ, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + total_signals = reply.toUInt(); + if (!total_signals) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + if (mSignal != ICD_DBUS_API_STATISTICS_SIG) { + mInterface.clear(); + continue; + } + } + + timer.stop(); + + if (mError.isEmpty()) { + get_statistics_all_result(mArgs, stats_result); + } else { + qWarning() << "Error:" << mError; + } + + // The returned value should be one because we asked for one statistics + return total_signals; +} + + +static void get_addrinfo_all_result(QList& args, + IcdAddressInfoResult& ret) +{ + int i=0; + + if (args.isEmpty()) + return; + + ret.params.service_type = args[i++].toString(); + ret.params.service_attrs = args[i++].toUInt(); + ret.params.service_id = args[i++].toString(); + ret.params.network_type = args[i++].toString(); + ret.params.network_attrs = args[i++].toUInt(); + ret.params.network_id = args[i++].toByteArray(); + + QVariantList vl = args[i].toList(); + QVariant reply = vl.first(); + QList lst = reply.toList(); + for (int k=0; k& addr_results) +{ + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdAddressInfoResult result; + time_t started; + int timeout_secs = timeout / 1000; + + PDEBUG("%s\n", "addr_results"); + + clearState(); + reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + if (reply.type() != QVariant::UInt) + return 0; + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + started = time(0); + addr_results.clear(); + while (signals_left) { + mInterface.clear(); + while ((time(0)<=(started+timeout_secs)) && mInterface.isEmpty()) { + mDBus->synchronousDispatch(1000); + } + + if (time(0)>(started+timeout_secs)) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { + continue; + } + + if (mError.isEmpty()) { + get_addrinfo_all_result(mArgs, result); + addr_results << result; + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + + PDEBUG("total_signals=%d\n", total_signals); + return total_signals; +} + +uint IcdPrivate::addrinfo_non_blocking(QList& addr_results) +{ + QTimer timer; + QVariant reply; + QVariantList vl; + uint signals_left, total_signals; + IcdAddressInfoResult result; + + PDEBUG("%s\n", "non blocking addrinfo"); + + clearState(); + reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + if (reply.type() != QVariant::UInt) + return 0; + signals_left = total_signals = reply.toUInt(); + if (!signals_left) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + addr_results.clear(); + while (signals_left) { + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + } + + if (!timer.isActive()) { + total_signals = 0; + break; + } + + if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { + continue; + } + + if (mError.isEmpty()) { + get_addrinfo_all_result(mArgs, result); + addr_results << result; + signals_left--; + } else { + qWarning() << "Error:" << mError; + break; + } + } + timer.stop(); + PDEBUG("total_signals=%d\n", total_signals); + return total_signals; +} + + +uint IcdPrivate::addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result) +{ + QTimer timer; + QVariant reply; + uint total_signals; + QVariantList vl; + + clearState(); + + reply = mDBus->call(ICD_DBUS_API_ADDRINFO_REQ, + service_type, service_attrs, service_id, + network_type, network_attrs, network_id); + if (reply.type() != QVariant::List) + return 0; + vl = reply.toList(); + if (vl.isEmpty()) + return 0; + reply = vl.first(); + total_signals = reply.toUInt(); + + if (!total_signals) + return 0; + + timer.setSingleShot(true); + timer.start(timeout); + + mInterface.clear(); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + if (mSignal != ICD_DBUS_API_ADDRINFO_SIG) { + mInterface.clear(); + continue; + } + } + + timer.stop(); + + if (mError.isEmpty()) { + get_addrinfo_all_result(mArgs, addr_result); + } else { + qWarning() << "Error:" << mError; + } + + // The returned value should be one because we asked for one addrinfo + return total_signals; +} + + +Icd::Icd(QObject *parent) + : QObject(parent), d(new IcdPrivate(this)) +{ +} + +Icd::Icd(unsigned int timeout, QObject *parent) + : QObject(parent), d(new IcdPrivate(timeout, this)) +{ +} + +Icd::Icd(unsigned int timeout, IcdDbusInterfaceVer ver, QObject *parent) + : QObject(parent), d(new IcdPrivate(timeout, ver, this)) +{ +} + +Icd::~Icd() +{ + delete d; +} + + +QStringList Icd::scan(icd_scan_request_flags flags, + QStringList &network_types, + QList& scan_results, + QString& error) +{ + return d->scan(flags, network_types, scan_results, error); +} + + +void Icd::scanCancel() +{ + d->scanCancel(); +} + + +bool Icd::connect(icd_connection_flags flags, IcdConnectResult& result) +{ + return d->connect(flags, result); +} + + +bool Icd::connect(icd_connection_flags flags, QList& params, + IcdConnectResult& result) +{ + return d->connect(flags, params, result); +} + + +bool Icd::connect(icd_connection_flags flags, QString& iap, QString& result) +{ + return d->connect(flags, iap, result); +} + + +void Icd::select(uint flags) +{ + d->select(flags); +} + + +void Icd::disconnect(uint connect_flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id) +{ + d->disconnect(connect_flags, service_type, + service_attrs, service_id, + network_type, network_attrs, + network_id); +} + + +void Icd::disconnect(uint connect_flags) +{ + d->disconnect(connect_flags); +} + + +uint Icd::state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult &state_result) +{ + return d->state(service_type, service_attrs, service_id, + network_type, network_attrs, network_id, + state_result); +} + + +uint Icd::statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result) +{ + return d->statistics(service_type, service_attrs, service_id, + network_type, network_attrs, network_id, + stats_result); +} + + +uint Icd::addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result) +{ + return d->addrinfo(service_type, service_attrs, service_id, + network_type, network_attrs, network_id, + addr_result); +} + + +uint Icd::state(QList& state_results) +{ + return d->state(state_results); +} + +uint Icd::state_non_blocking(QList& state_results) +{ + return d->state_non_blocking(state_results); +} + +uint Icd::statistics(QList& stats_results) +{ + return d->statistics(stats_results); +} + + +uint Icd::addrinfo(QList& addr_results) +{ + return d->addrinfo(addr_results); +} + +uint Icd::addrinfo_non_blocking(QList& addr_results) +{ + return d->addrinfo_non_blocking(addr_results); +} + +void Icd::icdSignalReceived(const QString& interface, + const QString& signal, + const QList& args) +{ + d->signalReceived(interface, signal, args); +} + + +void Icd::icdCallReply(const QString& method, + const QList& args, + const QString& error) +{ + d->callReply(method, args, error); +} + + +QString Icd::error() +{ + return d->error(); +} + +} // Maemo namespace + + diff --git a/src/3rdparty/libconninet/src/maemo_icd.h b/src/3rdparty/libconninet/src/maemo_icd.h new file mode 100644 index 0000000..d7a8d5b --- /dev/null +++ b/src/3rdparty/libconninet/src/maemo_icd.h @@ -0,0 +1,182 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef MAEMO_ICD_H +#define MAEMO_ICD_H + +#include +#include +#include +#include +#include +#include + +#include +#include +#include +#include + +#include "dbusdispatcher.h" +#include + +#define ICD_LONG_SCAN_TIMEOUT (30*1000) /* 30sec */ +#define ICD_SHORT_SCAN_TIMEOUT (10*1000) /* 10sec */ +#define ICD_SHORT_CONNECT_TIMEOUT (10*1000) /* 10sec */ +#define ICD_LONG_CONNECT_TIMEOUT (150*1000) /* 2.5min */ + +namespace Maemo { + +struct CommonParams { + QString service_type; + uint service_attrs; + QString service_id; + QString network_type; + uint network_attrs; + QByteArray network_id; +}; + +struct ConnectParams { + struct CommonParams connect; +}; + +struct IcdScanResult { + uint status; // see #icd_scan_status + uint timestamp; // when last seen + QString service_name; + uint service_priority; // within a service type + QString network_name; + uint network_priority; + struct CommonParams scan; + uint signal_strength; // quality, 0 (none) - 10 (good) + QString station_id; // e.g. MAC address or similar id + uint signal_dB; // use signal strength above unless you know what you are doing + + IcdScanResult() { + status = timestamp = scan.service_attrs = service_priority = + scan.network_attrs = network_priority = signal_strength = + signal_dB = 0; + } +}; + +struct IcdConnectResult { + struct CommonParams connect; + uint status; +}; + +struct IcdStateResult { + struct CommonParams params; + QString error; + uint state; +}; + +struct IcdStatisticsResult { + struct CommonParams params; + uint time_active; // in seconds + enum icd_nw_levels signal_strength; // see network_api_defines.h in icd2-dev package + uint bytes_sent; + uint bytes_received; +}; + +struct IcdIPInformation { + QString address; + QString netmask; + QString default_gateway; + QString dns1; + QString dns2; + QString dns3; +}; + +struct IcdAddressInfoResult { + struct CommonParams params; + QList ip_info; +}; + +enum IcdDbusInterfaceVer { + IcdOldDbusInterface = 0, // use the old OSSO-IC interface + IcdNewDbusInterface // use the new Icd2 interface (default) +}; + + +class IcdPrivate; +class Icd : public QObject +{ + Q_OBJECT + +public: + Icd(QObject *parent = 0); + Icd(unsigned int timeout, QObject *parent = 0); + Icd(unsigned int timeout, IcdDbusInterfaceVer ver, QObject *parent = 0); + ~Icd(); + QString error(); // returns last error string + + /* Icd2 dbus API functions */ + QStringList scan(icd_scan_request_flags flags, + QStringList &network_types, + QList& scan_results, + QString& error); + void scanCancel(); + bool connect(icd_connection_flags flags, IcdConnectResult& result); + bool connect(icd_connection_flags flags, QList& params, + IcdConnectResult& result); + bool connect(icd_connection_flags flags, QString& iap, QString& result); + void select(uint flags); + void disconnect(uint connect_flags, QString& service_type, + uint service_attrs, QString& service_id, + QString& network_type, uint network_attrs, + QByteArray& network_id); + void disconnect(uint connect_flags); + + uint state(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStateResult &state_result); + uint statistics(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdStatisticsResult& stats_result); + uint addrinfo(QString& service_type, uint service_attrs, + QString& service_id, QString& network_type, + uint network_attrs, QByteArray& network_id, + IcdAddressInfoResult& addr_result); + + uint state(QList& state_results); + uint state_non_blocking(QList& state_results); + uint statistics(QList& stats_results); + uint addrinfo(QList& addr_results); + uint addrinfo_non_blocking(QList& addr_results); + +private Q_SLOTS: + void icdSignalReceived(const QString& interface, + const QString& signal, + const QList& args); + void icdCallReply(const QString& method, + const QList& args, + const QString& error); + +private: + IcdPrivate *d; + friend class IcdPrivate; +}; + +} // Maemo namespace + +#endif diff --git a/src/3rdparty/libconninet/src/proxyconf.cpp b/src/3rdparty/libconninet/src/proxyconf.cpp new file mode 100644 index 0000000..5b27565 --- /dev/null +++ b/src/3rdparty/libconninet/src/proxyconf.cpp @@ -0,0 +1,315 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#include +#include +#include +#include +#include +#include +#include "proxyconf.h" + +#define CONF_PROXY "/system/proxy" +#define HTTP_PROXY "/system/http_proxy" + + +namespace Maemo { + +class NetworkProxyFactory : QNetworkProxyFactory { +public: + NetworkProxyFactory() { } + QList queryProxy(const QNetworkProxyQuery &query = QNetworkProxyQuery()); +}; + + +QList NetworkProxyFactory::queryProxy(const QNetworkProxyQuery &query) +{ + ProxyConf proxy_conf; + + QList result = proxy_conf.flush(query); + if (result.isEmpty()) + result << QNetworkProxy::NoProxy; + + return result; +} + + +class ProxyConfPrivate { +private: + // proxy values from gconf + QString mode; + bool use_http_host; + QString autoconfig_url; + QString http_proxy; + quint16 http_port; + QList ignore_hosts; + QString secure_host; + quint16 secure_port; + QString ftp_host; + quint16 ftp_port; + QString socks_host; + quint16 socks_port; + QString rtsp_host; + quint16 rtsp_port; + + QVariant getValue(QString& name); + QVariant getHttpValue(QString& name); + QVariant getValue(const char *name); + QVariant getHttpValue(const char *name); + bool isHostExcluded(const QString &host); + +public: + QString prefix; + QString http_prefix; + + void readProxyData(); + QList flush(const QNetworkProxyQuery &query); +}; + + +QVariant ProxyConfPrivate::getValue(QString& name) +{ + GConfItem item(prefix + name); + return item.value(); +} + +QVariant ProxyConfPrivate::getHttpValue(QString& name) +{ + GConfItem item(http_prefix + name); + return item.value(); +} + + +QVariant ProxyConfPrivate::getValue(const char *name) +{ + QString n = QString(name); + return getValue(n); +} + +QVariant ProxyConfPrivate::getHttpValue(const char *name) +{ + QString n = QString(name); + return getHttpValue(n); +} + + +#define GET(var, type) \ + do { \ + var = getValue(#var).to##type (); \ + /*qDebug()<<"var="<prefix = CONF_PROXY "/"; + d_ptr->http_prefix = HTTP_PROXY "/"; +} + +ProxyConf::~ProxyConf() +{ + delete d_ptr; +} + + +QList ProxyConf::flush(const QNetworkProxyQuery &query) +{ + d_ptr->readProxyData(); + return d_ptr->flush(query); +} + + +static int refcount = 0; +static QReadWriteLock lock; + +void ProxyConf::update() +{ + QWriteLocker locker(&lock); + NetworkProxyFactory *factory = new NetworkProxyFactory(); + QNetworkProxyFactory::setApplicationProxyFactory((QNetworkProxyFactory*)factory); + refcount++; +} + + +void ProxyConf::clear(void) +{ + QWriteLocker locker(&lock); + refcount--; + if (refcount == 0) + QNetworkProxyFactory::setApplicationProxyFactory(NULL); + + if (refcount<0) + refcount = 0; +} + + +} // namespace Maemo diff --git a/src/3rdparty/libconninet/src/proxyconf.h b/src/3rdparty/libconninet/src/proxyconf.h new file mode 100644 index 0000000..7711c49 --- /dev/null +++ b/src/3rdparty/libconninet/src/proxyconf.h @@ -0,0 +1,53 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + +#ifndef PROXYCONF_H +#define PROXYCONF_H + +#include +#include + +namespace Maemo { + +class ProxyConfPrivate; +class ProxyConf { +private: + ProxyConfPrivate *d_ptr; + +public: + ProxyConf(); + virtual ~ProxyConf(); + + QList flush(const QNetworkProxyQuery &query = QNetworkProxyQuery()); // read the proxies from db + + /* Note that for each update() call there should be corresponding + * clear() call because the ProxyConf class implements a reference + * counting mechanism. The factory is removed only when there is + * no one using the factory any more. + */ + static void update(void); // this builds QNetworkProxy factory + static void clear(void); // this removes QNetworkProxy factory +}; + +} // namespace Maemo + +#endif diff --git a/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp b/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp new file mode 100644 index 0000000..70deb3f --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_dbusdispatcher.cpp @@ -0,0 +1,191 @@ +/* * This file is part of conn-dui-settings-inet * + * + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Aapo Makela + * + * This software, including documentation, is protected by copyright + * controlled by Nokia Corporation. All rights are reserved. Copying, + * including reproducing, storing, adapting or translating, any or all of + * this material requires the prior written consent of Nokia Corporation. + * This material also contains confidential information which may not be + * disclosed to others without the prior written consent of Nokia. + */ + +#include +#include +#include +#include +#include + +#include + +class Ut_DBusDispatcher : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void simpleSignalReceived(const QString& interface, + const QString& signal, + const QList& args); + void simpleCallReply(const QString& method, + const QList& args, + const QString& error); + void simpleCall(); + + void complexCallReply(const QString& method, + const QList& args, + const QString& error); + void complexCall(); + +private: + Maemo::DBusDispatcher *mSubject; + QProcess *icd_stub; + + QString mMethod; + QString mInterface; + QString mSignal; + QList mArgs; +}; + +void Ut_DBusDispatcher::init() +{ + mSubject = new Maemo::DBusDispatcher("com.nokia.icd2", "/com/nokia/icd2", + "com.nokia.icd2"); + + // Start icd2 stub + icd_stub = new QProcess(this); + icd_stub->start("/usr/bin/icd2_stub.py"); + QTest::qWait(1000); +} + +void Ut_DBusDispatcher::cleanup() +{ + // Terminate icd2 stub + icd_stub->terminate(); + icd_stub->waitForFinished(); + + delete mSubject; + mSubject = 0; +} + +void Ut_DBusDispatcher::initTestCase() +{ +} + +void Ut_DBusDispatcher::cleanupTestCase() +{ +} + +void Ut_DBusDispatcher::simpleSignalReceived(const QString& interface, + const QString& signal, + const QList& args) +{ + // Signal handler, which simply records what has been signalled + mInterface = interface; + mSignal = signal; + mArgs = args; +} + +void Ut_DBusDispatcher::simpleCallReply(const QString& method, + const QList& args, + const QString& error) +{ + mMethod = method; + + // Check that method matches and at least WLAN_INFRA is returned + QVERIFY(error.isEmpty()); + QVERIFY(args[0].toStringList().contains("WLAN_INFRA")); +} + +void Ut_DBusDispatcher::simpleCall() +{ + uint flags = 0; + QList reply; + int idx = 0; + QTimer timer; + + // Connect signals + connect(mSubject, SIGNAL(signalReceived(const QString&, + const QString&, + const QList&)), + this, SLOT(simpleSignalReceived(const QString&, + const QString&, + const QList&))); + connect(mSubject, SIGNAL(callReply(const QString&, + const QList&, + const QString&)), + this, SLOT(simpleCallReply(const QString&, + const QList&, + const QString&))); + + // Request scan and verify the call starts succesfully + QVERIFY(mSubject->callAsynchronous("scan_req", flags)); + + // Wait 1st scan signal for 10 secs + timer.setSingleShot(true); + timer.start(10000); + while (timer.isActive() && mInterface.isEmpty()) { + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + idx++; + } + timer.stop(); + + // Sanity checks for the scan result + QVERIFY(mInterface == "com.nokia.icd2"); // interface is icd2 + QVERIFY(mMethod == "scan_req"); // method is scan_req + QVERIFY(mSignal == "scan_result_sig"); // signal is scan result + QVERIFY(mArgs[0] == QVariant(0) || + mArgs[0] == QVariant(4)); // First argument is status + // (0 == NEW, 4 == COMPLETED) + //QVERIFY(mArgs.contains(QVariant("WLAN_INFRA"))); // WLAN scan result +} + +void Ut_DBusDispatcher::complexCallReply(const QString& method, + const QList& args, + const QString& error) +{ + mMethod = method; + + // Check that method has not return arguments and error is not set + QVERIFY(error.isEmpty()); + QVERIFY(args.isEmpty()); +} + +void Ut_DBusDispatcher::complexCall() +{ + uint flags = ICD_CONNECTION_FLAG_UI_EVENT; + QList reply; + QVariantList networks; + QVariantList network1; + + network1 << "" << (uint)0 << "" << "WLAN_INFRA" << (uint)0x05000011 << QByteArray("osso@46@net"); + networks << QVariant(network1); + + // Connect signal + connect(mSubject, SIGNAL(callReply(const QString&, + const QList&, + const QString&)), + this, SLOT(complexCallReply(const QString&, + const QList&, + const QString&))); + + // Request connect and verify the call starts succesfully + QVERIFY(mSubject->callAsynchronous("connect_req", flags, networks)); + + QTest::qWait(1000); + + // Sanity checks for the scan result + QVERIFY(mInterface == "com.nokia.icd2"); // interface is icd2 + QVERIFY(mMethod == "connect_req"); // method connect_req +} + +QTEST_MAIN(Ut_DBusDispatcher) + +#include "ut_dbusdispatcher.moc" diff --git a/src/3rdparty/libconninet/tests/ut_iapconf.cpp b/src/3rdparty/libconninet/tests/ut_iapconf.cpp new file mode 100644 index 0000000..6a91d61 --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_iapconf.cpp @@ -0,0 +1,186 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009 Nokia Corporation. All rights reserved. + + Contact: Aapo Makela + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + + +#include +#include + +#include + +class Ut_IAPConf : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void setupIAP(); + void setupIAPContainingDot(); + void unsetIAPValueIsNotValid(); + void verifyAllIAPs(); + void allForEmptyConfReturnsEmptyList(); + void settingInvalidValueUnsetsKey(); + +private: + Maemo::IAPConf *mSubject; +}; + +void Ut_IAPConf::init() +{ + mSubject = new Maemo::IAPConf("test_iap"); +} + +void Ut_IAPConf::cleanup() +{ + // Clear made settings + mSubject->clear(); + + delete mSubject; + mSubject = 0; +} + +void Ut_IAPConf::initTestCase() +{ +} + +void Ut_IAPConf::cleanupTestCase() +{ +} + +void Ut_IAPConf::setupIAP() +{ + // Set bunch of values + mSubject->set("ipv4_type", "AUTO", + "wlan_wepkey1", "connt", + "wlan_wepdefkey", 1, + "wlan_ssid", QByteArray("CONNTEST-1")); + + // Set one value + mSubject->setValue("type", "WLAN_INFRA"); + + // Check all values that they were set correctly + QVERIFY(mSubject->value("ipv4_type").toString() == "AUTO"); + QVERIFY(mSubject->value("wlan_wepkey1").toString() == "connt"); + QVERIFY(mSubject->value("wlan_wepdefkey").toInt() == 1); + QVERIFY(mSubject->value("wlan_ssid").toByteArray() == QByteArray("CONNTEST-1")); + QVERIFY(mSubject->value("type").toString() == "WLAN_INFRA"); +} + +void Ut_IAPConf::setupIAPContainingDot() +{ + delete mSubject; + mSubject = new Maemo::IAPConf("test.iap"); + + // Set and check one value + mSubject->setValue("type", "DUMMY"); + QVERIFY(mSubject->value("type").toString() == "DUMMY"); +} + +void Ut_IAPConf::unsetIAPValueIsNotValid() +{ + QVariant invalidValue = mSubject->value("this_value_does_not_exist"); + QVERIFY(invalidValue.isValid() == false); +} + +void Ut_IAPConf::verifyAllIAPs() +{ + int count = 0, extras = 0; + QRegExp regexp("iap[1-3]"); + Maemo::IAPConf iap1("iap1"); + Maemo::IAPConf iap2("iap2"); + Maemo::IAPConf iap3("iap3"); + + iap1.clear(); + iap2.clear(); + iap3.clear(); + + iap1.setValue("name", "iap1"); + iap2.setValue("name", "iap2"); + iap3.setValue("name", "iap3"); + + count = extras = 0; + QList iaps; + Maemo::IAPConf::getAll(iaps, true); + foreach (QString iap_path, iaps) { + QString iap_id = iap_path.section('/', 5); /* This is the IAP id */ + if (!iap_id.contains(regexp)) { + extras++; + continue; + } + Maemo::IAPConf iap(iap_id); + QString name = iap.value("name").toString(); + QVERIFY(name == iap_id); + count++; + } + QCOMPARE(count, iaps.size()-extras); + + iap1.clear(); + iap2.clear(); + iap3.clear(); + + iap1.setValue("name", "iap1"); + iap2.setValue("name", "iap2"); + iap3.setValue("name", "iap3"); + + count = extras = 0; + Maemo::IAPConf::getAll(iaps); + foreach (QString iap_id, iaps) { + if (!iap_id.contains(regexp)) { + extras++; + continue; + } + Maemo::IAPConf iap(iap_id); + QString name = iap.value("name").toString(); + QVERIFY(name == iap_id); + count++; + } + QCOMPARE(count, iaps.size()-extras); +} + +void Ut_IAPConf::allForEmptyConfReturnsEmptyList() +{ + // Clear everything in configuration + mSubject->clearAll(); + + // Get all for a list and check that it is empty + QStringList iaps; + mSubject->getAll(iaps); + QVERIFY(iaps.isEmpty()); +} + +void Ut_IAPConf::settingInvalidValueUnsetsKey() +{ + // Setup some IAP + setupIAP(); + + // Set invalid value to unset "wlan_wepdefkey" key and verify that the + // value is unset + mSubject->setValue("wlan_wepdefkey", QVariant()); + QVERIFY(!mSubject->value("wlan_wepdefkey").isValid()); +} + +QTEST_MAIN(Ut_IAPConf) + +#include "ut_iapconf.moc" diff --git a/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp b/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp new file mode 100644 index 0000000..f14f623 --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_iapmonitor.cpp @@ -0,0 +1,118 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2009-2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + + +#include +#include + +#include +#include + +static const char *iap_id = "test_monitor_1"; + +class TestIAPMonitor : public Maemo::IAPMonitor +{ +public: + QString addedIap; + QString removedIap; + +protected: + virtual void iapAdded(const QString &id) + { + addedIap = id; + } + + virtual void iapRemoved(const QString &id) + { + removedIap = id; + } +}; + +class Ut_IAPMonitor : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void check(); + +private: + TestIAPMonitor *mon; + Maemo::IAPConf *iap; +}; + +void Ut_IAPMonitor::init() +{ + mon = new TestIAPMonitor; +} + +void Ut_IAPMonitor::cleanup() +{ + delete mon; + mon = 0; +} + +void Ut_IAPMonitor::initTestCase() +{ +} + +void Ut_IAPMonitor::cleanupTestCase() +{ +} + +void Ut_IAPMonitor::check() +{ + QVERIFY(mon->addedIap.isEmpty()); + + iap = new Maemo::IAPConf(iap_id); + iap->set("ipv4_type", "AUTO", + "wlan_wepkey1", "connt", + "wlan_wepdefkey", 1, + "wlan_ssid", QByteArray(iap_id)); + + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + QVERIFY(mon->addedIap == iap_id); + mon->addedIap.clear(); + + QVERIFY(mon->removedIap.isEmpty()); + + // Unset only one value and verify that IAP is not removed + iap->set("ipv4_type", QVariant()); + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + QVERIFY(mon->removedIap.isEmpty()); + + // Clear the whole IAP and check that it is removed + iap->clear(); + delete iap; + + QCoreApplication::processEvents(QEventLoop::AllEvents, 1000); + + QVERIFY(mon->removedIap == iap_id); +} + +QTEST_MAIN(Ut_IAPMonitor) + +#include "ut_iapmonitor.moc" diff --git a/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp b/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp new file mode 100644 index 0000000..494829d --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_maemo_icd.cpp @@ -0,0 +1,274 @@ +/* + * Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies). + * All rights reserved. + * + * Contact: Jukka Rissanen + * + * This library is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public License + * version 2.1 as published by the Free Software Foundation. + * + * This library is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this library; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + + +// !!!! +// !!!! NOTE: THESE TEST DO NOT REALLY WORK YET BECAUSE OF MISSING +// !!!! FUNCTIONALITY IN ICD2 STUB. YOU HAVE BEEN WARNED. +// !!!! + + +#include +#include +#include +#include +#include + +#include "maemo_icd.h" + +class Ut_MaemoIcd : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + void scan_req(); + void scan_cancel_req(); + void connect_req_default(); + void state_req_all(); + void state_req(); + void statistics_req_all(); + void statistics_req(); + void addrinfo_req_all(); + void addrinfo_req(); + +private: + void disconnect_req_default(); // this is currently not run + void connect_req_specific(); // this is currently not run + QProcess *icd_stub; + bool connect_iap(Maemo::IcdConnectResult &connect_result, + QString &result, + QString &error, + QString iap=QString()); +}; + + +QString create_error_str(Maemo::Icd &icd) +{ + return icd.error(); +} + + +void Ut_MaemoIcd::init() +{ + icd_stub = new QProcess(this); + icd_stub->setStandardOutputFile("/tmp/ut_maemo_icd.log"); + icd_stub->start("/usr/bin/icd2_stub.py"); + QTest::qWait(1000); + + // Set the statistics + QProcess dbus_send; + dbus_send.start("dbus-send --type=method_call --system " + "--dest=com.nokia.icd2 /com/nokia/icd2 " + "com.nokia.icd2.testing.set_statistics " + "uint32:1024 uint32:256"); + dbus_send.waitForFinished(); + +} + +void Ut_MaemoIcd::cleanup() +{ + icd_stub->terminate(); + icd_stub->waitForFinished(); +} + +void Ut_MaemoIcd::initTestCase() +{ +} + +void Ut_MaemoIcd::cleanupTestCase() +{ +} + +void Ut_MaemoIcd::scan_req() +{ + QList scanned; + QStringList scannedNetworkTypes; + QStringList networkTypesToScan; + QString error; + Maemo::Icd icd(ICD_SHORT_SCAN_TIMEOUT); + + scannedNetworkTypes = icd.scan(ICD_SCAN_REQUEST_ACTIVE, + networkTypesToScan, + scanned, + error); + QVERIFY(error.isEmpty()); + QCOMPARE(scanned.size(), 3); + QVERIFY(scannedNetworkTypes[0] == "WLAN_INFRA"); + QVERIFY(scannedNetworkTypes[1] == "DUN_GSM_PS"); +} + +void Ut_MaemoIcd::scan_cancel_req() +{ + Maemo::Icd icd; + icd.scanCancel(); + // Not much to verify here +} + +bool Ut_MaemoIcd::connect_iap(Maemo::IcdConnectResult &connect_result, + QString &result, + QString &error, + QString iap) +{ + icd_connection_flags flags = ICD_CONNECTION_FLAG_USER_EVENT; + bool st; + Maemo::Icd icd(ICD_SHORT_CONNECT_TIMEOUT); + + if (iap.isEmpty()) { + qDebug() << "connecting to default IAP"; + st = icd.connect(flags, connect_result); + } else { + qDebug() << "connecting to" << iap; + st = icd.connect(flags, iap, result); + } + + error = create_error_str(icd); + return st; +} + +void Ut_MaemoIcd::connect_req_default() +{ + Maemo::IcdConnectResult connect_result; + QString result, error; + bool st; + st = connect_iap(connect_result, result, error); + QVERIFY2(st, error.toAscii().data()); + result = connect_result.connect.network_id.data(); + qDebug() << result; +} + + +void Ut_MaemoIcd::disconnect_req_default() +{ + icd_connection_flags flags = ICD_CONNECTION_FLAG_USER_EVENT; + bool st; + Maemo::Icd icd(ICD_SHORT_CONNECT_TIMEOUT); + icd.disconnect(flags); +} + + +void Ut_MaemoIcd::connect_req_specific() +{ + Maemo::IcdConnectResult connect_result; + QString result; + QString error; + bool st; + st = connect_iap(connect_result, result, error, "wpa2gx2.osso.net"); + QVERIFY2(st, error.toAscii().data()); + qDebug() << result; +} + + +void Ut_MaemoIcd::state_req_all() +{ + QList state_results; + Maemo::Icd icd; + int sig; + sig = icd.state(state_results); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +void Ut_MaemoIcd::state_req() +{ + Maemo::IcdStateResult state_result; + Maemo::Icd icd; + int sig; + QString service_type, service_id; + QString network_type("WLAN_INFRA"); + QByteArray network_id("wpa2gx2.osso.net"); + sig = icd.state(service_type, 0, service_id, + network_type, (uint)0x17a1, network_id, + state_result); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +void Ut_MaemoIcd::statistics_req_all() +{ + QList stats_results; + Maemo::Icd icd; + int sig; + QString err; + sig = icd.statistics(stats_results); + err = create_error_str(icd); + if (!err.isEmpty()) + QVERIFY2(sig==1, err.toAscii().data()); + else + QCOMPARE(sig, 1); + + for(int i=0; i addr_results; + Maemo::Icd icd; + int sig; + sig = icd.addrinfo(addr_results); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +void Ut_MaemoIcd::addrinfo_req() +{ + Maemo::IcdAddressInfoResult addr_result; + Maemo::Icd icd; + int sig; + QString service_type, service_id; + QString network_type("WLAN_INFRA"); + QByteArray network_id("wpa2gx2.osso.net"); + sig = icd.addrinfo(service_type, 0, service_id, + network_type, (uint)0x17a1, network_id, + addr_result); + QVERIFY2(sig==1, create_error_str(icd).toAscii().data()); +} + + +QTEST_MAIN(Ut_MaemoIcd) + +#include "ut_maemo_icd.moc" diff --git a/src/3rdparty/libconninet/tests/ut_proxyconf.cpp b/src/3rdparty/libconninet/tests/ut_proxyconf.cpp new file mode 100644 index 0000000..1f407f0 --- /dev/null +++ b/src/3rdparty/libconninet/tests/ut_proxyconf.cpp @@ -0,0 +1,400 @@ +/* + libconninet - Internet Connectivity support library + + Copyright (C) 2010 Nokia Corporation. All rights reserved. + + Contact: Jukka Rissanen + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public License + version 2.1 as published by the Free Software Foundation. + + This library is distributed in the hope that it will be useful, but + WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + 02110-1301 USA +*/ + + +#include +#include +#include +#include + +#include "../src/proxyconf.h" + +class Ut_ProxyConf : public QObject +{ + Q_OBJECT + +private Q_SLOTS: + void init(); + void cleanup(); + void initTestCase(); + void cleanupTestCase(); + + // tests without the factory + void proxy_ftp_no_factory_ok_auto(); + void proxy_ftp_no_factory_ok_manual(); + void proxy_http_no_factory_ok_manual(); + void proxy_https_no_factory_ok_manual(); + void proxy_socks_no_factory_ok_manual(); + void proxy_default_no_factory_ok_manual(); + + // tests using the factory + void proxy_ftp_factory_ok_auto(); + void proxy_ftp_factory_ok_manual(); + void proxy_http_factory_ok_manual(); + void proxy_https_factory_ok_manual(); + void proxy_socks_factory_ok_manual(); + void proxy_http_factory_ok_manual_clear(); + void proxy_default_factory_ok_manual(); + void proxy_http_factory_ok_manual_ignore_list(); + void proxy_default_factory_ok_manual_system(); + +private: + Maemo::ProxyConf *pc; +}; + + +void put(QString var, QString type, QString value) +{ + QProcess gconf; + if (value.isEmpty()) + gconf.start(QString("gconftool-2 -u /system/proxy/"+var)); + else + gconf.start(QString("gconftool-2 -s /system/proxy/"+var+" -t "+type+" "+value)); + gconf.waitForFinished(); +} + +void put_http(QString var, QString type, QString value) +{ + QProcess gconf; + if (value.isEmpty()) + gconf.start(QString("gconftool-2 -u /system/http_proxy/"+var)); + else + gconf.start(QString("gconftool-2 -s /system/http_proxy/"+var+" -t "+type+" "+value)); + gconf.waitForFinished(); +} + +void put_list(QString var, QString type, QList value) +{ + QProcess gconf; + QString values = "["; + foreach (QString str, value) + values = values + str + ","; + values.chop(1); + values = values + "]"; + + gconf.start(QString("gconftool-2 -s /system/http_proxy/"+var+" -t list --list-type="+type+" "+values)); + gconf.waitForFinished(); +} + + +void Ut_ProxyConf::init() +{ + put_http("host", "string", "my.proxy.com"); + put_http("port", "int", "8080"); + + QList list; + list.append("foo.bar.com"); + list.append("192.168.19.69"); + list.append("192.168.20.0/24"); + list.append("bar.foo.com"); + put_list("ignore_hosts", "string", list); + put_http("use_http_host", "boolean", "true"); + + put("mode", "string", "auto"); + put("autoconfig_url", "string", "http://foo.bar.com/autoconf"); + put("secure_host", "string", "secure_host.com"); + put("secure_port", "int", "112"); + + put("ftp_host", "string", "ftp.nuukia.com"); + put("ftp_port", "int", "2000"); + put("socks_host", "string", "socks.host.com"); + put("socks_port", "int", "10080"); + put("rtsp_host", "string", "rtsp.voice.com"); + put("rtsp_port", "int", "1554"); + + pc = new Maemo::ProxyConf(); +} + +void Ut_ProxyConf::cleanup() +{ + delete pc; + pc = 0; +} + +void Ut_ProxyConf::initTestCase() +{ +} + +void Ut_ProxyConf::cleanupTestCase() +{ +} + + +void Ut_ProxyConf::proxy_ftp_no_factory_ok_auto() +{ + QList nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + + nplist = pc->flush(query); + QVERIFY(nplist.length()==0); +} + + +void Ut_ProxyConf::proxy_ftp_no_factory_ok_manual() +{ + QList nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + + put("mode", "string", "manual"); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==3); + QVERIFY(nplist.first().type() == QNetworkProxy::FtpCachingProxy); +} + + +void Ut_ProxyConf::proxy_http_no_factory_ok_manual() +{ + QList nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + + put("mode", "string", "manual"); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==3); + QVERIFY(nplist.first().type() == QNetworkProxy::HttpProxy); +} + + +void Ut_ProxyConf::proxy_https_no_factory_ok_manual() +{ + QList nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("https://maps.google.com/")); + + put("mode", "string", "manual"); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==2); + QVERIFY(nplist.first().type() == QNetworkProxy::HttpProxy); +} + + +void Ut_ProxyConf::proxy_socks_no_factory_ok_manual() +{ + QList nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + + put("mode", "string", "manual"); + put_http("host", "string", ""); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==2); + QVERIFY(nplist.first().type() == QNetworkProxy::Socks5Proxy); +} + + +void Ut_ProxyConf::proxy_default_no_factory_ok_manual() +{ + QList nplist; + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("foobar://maps.google.com/")); + + put("mode", "string", "manual"); + put("socks_host", "string", ""); + put("secure_host", "string", ""); + + nplist = pc->flush(query); + foreach (QNetworkProxy proxy, nplist) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(nplist.length()==0); +} + + +void Ut_ProxyConf::proxy_ftp_factory_ok_auto() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + Maemo::ProxyConf::update(); + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_ftp_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("ftp://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::FtpCachingProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_http_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_https_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("https://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==2); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_socks_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + put_http("host", "string", ""); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==2); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::Socks5Proxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_http_factory_ok_manual_clear() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + put_http("host", "string", "192.168.1.1"); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + + Maemo::ProxyConf::clear(); + listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); +} + + +void Ut_ProxyConf::proxy_default_factory_ok_manual() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("foobar://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + put("socks_host", "string", ""); + put("secure_host", "string", ""); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_http_factory_ok_manual_ignore_list() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://192.168.19.70/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + + foreach (QNetworkProxy proxy, listOfProxies) { + qDebug() << "proxy: " << proxy.hostName() << "port" << proxy.port(); + } + QVERIFY(listOfProxies.length()==3); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::HttpProxy); + + query = QNetworkProxyQuery(QUrl("http://192.168.20.10/")); + listOfProxies = QNetworkProxyFactory::proxyForQuery(query); + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + +void Ut_ProxyConf::proxy_default_factory_ok_manual_system() +{ + QNetworkProxyQuery query = QNetworkProxyQuery(QUrl("http://maps.google.com/")); + Maemo::ProxyConf::update(); + + put("mode", "string", "manual"); + + QList listOfProxies = QNetworkProxyFactory::systemProxyForQuery(query); + + QVERIFY(listOfProxies.length()==1); + QVERIFY(listOfProxies.first().type() == QNetworkProxy::NoProxy); + Maemo::ProxyConf::clear(); +} + + + + +QTEST_MAIN(Ut_ProxyConf) + +#include "ut_proxyconf.moc" -- cgit v0.12 From aebac76abbc5ed617d5998009afb06f07b9e237f Mon Sep 17 00:00:00 2001 From: Tasuku Suzuki Date: Mon, 16 Aug 2010 12:15:52 +0200 Subject: Fix compilation: QT_NO_LINEEDIT Merge-request: 774 Reviewed-by: Oswald Buddenhagen --- src/gui/util/qcompleter.cpp | 2 ++ 1 file changed, 2 insertions(+) diff --git a/src/gui/util/qcompleter.cpp b/src/gui/util/qcompleter.cpp index 04d6de9..e718212 100644 --- a/src/gui/util/qcompleter.cpp +++ b/src/gui/util/qcompleter.cpp @@ -921,10 +921,12 @@ void QCompleterPrivate::showPopup(const QRect& rect) void QCompleterPrivate::_q_fileSystemModelDirectoryLoaded(const QString &path) { Q_Q(QCompleter); +#ifndef QT_NO_LINEEDIT QLineEdit *lineEdit = qobject_cast(widget); //the path given by QFileSystemModel does not end with / if (lineEdit && !lineEdit->text().isEmpty() && !q->completionPrefix().isEmpty() && q->completionPrefix() != path + QLatin1Char('/')) q->complete(); +#endif } /*! -- cgit v0.12 From a9c0fbd5e946ae6e90b6db6dd4aea64c824a4066 Mon Sep 17 00:00:00 2001 From: Andreas Kling Date: Mon, 16 Aug 2010 04:33:03 +0200 Subject: qgrayraster: Speed up rendering of small cubic splines. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on these upstream freetype2 commits: 7fb3ef64a24489189113f693696eaf935f500c3f e419f48b40a746465a6c8e1d446b407b8677bfed Reviewed-by: Samuel Rødal --- src/gui/painting/qgrayraster.c | 36 ++++++++++++++++-------------------- 1 file changed, 16 insertions(+), 20 deletions(-) diff --git a/src/gui/painting/qgrayraster.c b/src/gui/painting/qgrayraster.c index 5e7c67a..539a33c 100644 --- a/src/gui/painting/qgrayraster.c +++ b/src/gui/painting/qgrayraster.c @@ -956,53 +956,49 @@ const QT_FT_Vector* control2, const QT_FT_Vector* to ) { - TPos dx, dy, da, db; int top, level; int* levels; QT_FT_Vector* arc; + int mid_x = ( DOWNSCALE( ras.x ) + to->x + + 3 * (control1->x + control2->x ) ) / 8; + int mid_y = ( DOWNSCALE( ras.y ) + to->y + + 3 * (control1->y + control2->y ) ) / 8; + TPos dx = DOWNSCALE( ras.x ) + to->x - ( mid_x << 1 ); + TPos dy = DOWNSCALE( ras.y ) + to->y - ( mid_y << 1 ); - dx = DOWNSCALE( ras.x ) + to->x - ( control1->x << 1 ); if ( dx < 0 ) dx = -dx; - dy = DOWNSCALE( ras.y ) + to->y - ( control1->y << 1 ); if ( dy < 0 ) dy = -dy; if ( dx < dy ) dx = dy; - da = dx; - - dx = DOWNSCALE( ras.x ) + to->x - 3 * ( control1->x + control2->x ); - if ( dx < 0 ) - dx = -dx; - dy = DOWNSCALE( ras.y ) + to->y - 3 * ( control1->x + control2->y ); - if ( dy < 0 ) - dy = -dy; - if ( dx < dy ) - dx = dy; - db = dx; level = 1; - da = da / ras.cubic_level; - db = db / ras.conic_level; - while ( da > 0 || db > 0 ) + dx /= ras.cubic_level; + while ( dx > 0 ) { - da >>= 2; - db >>= 3; + dx >>= 2; level++; } if ( level <= 1 ) { - TPos to_x, to_y, mid_x, mid_y; + TPos to_x, to_y; to_x = UPSCALE( to->x ); to_y = UPSCALE( to->y ); + + /* Recalculation of midpoint is needed only if */ + /* UPSCALE and DOWNSCALE have any effect. */ + +#if ( PIXEL_BITS != 6 ) mid_x = ( ras.x + to_x + 3 * UPSCALE( control1->x + control2->x ) ) / 8; mid_y = ( ras.y + to_y + 3 * UPSCALE( control1->y + control2->y ) ) / 8; +#endif gray_render_line( RAS_VAR_ mid_x, mid_y ); gray_render_line( RAS_VAR_ to_x, to_y ); -- cgit v0.12 From 8f3489c8bfb18246480a489779c2d9b330474c5d Mon Sep 17 00:00:00 2001 From: Martin Smith Date: Mon, 16 Aug 2010 15:59:30 +0200 Subject: qdoc: Reorganized the QML elements table to be a dictionary... ...and a set of functional group pages. --- doc/src/declarative/elements.qdoc | 252 ++++++++++++--------- .../WebKit/qt/declarative/qdeclarativewebview.cpp | 1 + .../graphicsitems/qdeclarativeanimatedimage.cpp | 3 +- .../graphicsitems/qdeclarativeborderimage.cpp | 1 + .../graphicsitems/qdeclarativeevents.cpp | 4 + .../graphicsitems/qdeclarativeflickable.cpp | 2 + .../graphicsitems/qdeclarativeflipable.cpp | 2 + .../graphicsitems/qdeclarativefocuspanel.cpp | 2 + .../graphicsitems/qdeclarativefocusscope.cpp | 2 + .../graphicsitems/qdeclarativegridview.cpp | 2 + .../graphicsitems/qdeclarativeimage.cpp | 2 + src/declarative/graphicsitems/qdeclarativeitem.cpp | 7 + .../graphicsitems/qdeclarativelayoutitem.cpp | 1 + .../graphicsitems/qdeclarativelistview.cpp | 1 + .../graphicsitems/qdeclarativeloader.cpp | 1 + .../graphicsitems/qdeclarativemousearea.cpp | 1 + src/declarative/graphicsitems/qdeclarativepath.cpp | 7 + .../graphicsitems/qdeclarativepathview.cpp | 1 + .../graphicsitems/qdeclarativepositioners.cpp | 4 + .../graphicsitems/qdeclarativerectangle.cpp | 3 + .../graphicsitems/qdeclarativerepeater.cpp | 1 + src/declarative/graphicsitems/qdeclarativetext.cpp | 3 +- .../graphicsitems/qdeclarativetextedit.cpp | 1 + .../graphicsitems/qdeclarativetextinput.cpp | 4 + .../graphicsitems/qdeclarativevisualitemmodel.cpp | 2 + src/declarative/qml/qdeclarativecomponent.cpp | 1 + src/declarative/qml/qdeclarativeengine.cpp | 2 + src/declarative/qml/qdeclarativeworkerscript.cpp | 1 + src/declarative/util/qdeclarativeanimation.cpp | 13 ++ src/declarative/util/qdeclarativebehavior.cpp | 1 + src/declarative/util/qdeclarativebind.cpp | 1 + src/declarative/util/qdeclarativeconnections.cpp | 1 + src/declarative/util/qdeclarativefontloader.cpp | 1 + src/declarative/util/qdeclarativelistmodel.cpp | 4 +- src/declarative/util/qdeclarativepackage.cpp | 1 + .../util/qdeclarativepropertychanges.cpp | 1 + .../util/qdeclarativesmoothedanimation.cpp | 1 + .../util/qdeclarativespringanimation.cpp | 1 + src/declarative/util/qdeclarativestate.cpp | 1 + src/declarative/util/qdeclarativestategroup.cpp | 1 + .../util/qdeclarativestateoperations.cpp | 3 + src/declarative/util/qdeclarativesystempalette.cpp | 1 + src/declarative/util/qdeclarativetimer.cpp | 1 + src/declarative/util/qdeclarativetransition.cpp | 1 + src/declarative/util/qdeclarativexmllistmodel.cpp | 2 + .../qdeclarativefolderlistmodel.cpp | 1 + src/imports/gestures/qdeclarativegesturearea.cpp | 2 + src/imports/particles/qdeclarativeparticles.cpp | 4 + tools/qdoc3/ditaxmlgenerator.cpp | 10 + tools/qdoc3/htmlgenerator.cpp | 10 + tools/qdoc3/htmlgenerator.h | 1 + 51 files changed, 267 insertions(+), 110 deletions(-) diff --git a/doc/src/declarative/elements.qdoc b/doc/src/declarative/elements.qdoc index c008404..94abe10 100644 --- a/doc/src/declarative/elements.qdoc +++ b/doc/src/declarative/elements.qdoc @@ -26,113 +26,151 @@ ****************************************************************************/ /*! -\page qdeclarativeelements.html -\target elements -\title QML Elements - -The following table lists the QML elements provided by the \l {QtDeclarative}{Qt Declarative} module. - -\table -\header \o {2,1} \bold {Basic Visual Items} -\row \o \l {Item} \o Basic item element inherited by all visual items in QML -\row \o \l {Rectangle} \o Basic visual rectangle element -\row \o \l {Gradient} \o Defines a gradient between two or more colors -\row \o \l {GradientStop} \o Defines a color used in a \l {Gradient} -\row \o \l {Image} \o Allows the use of bitmaps to a scene -\row \o \l {BorderImage} (Item-specific) \o Defines an image as a border -\row \o \l {AnimatedImage} \o For playing animations stored as a series of frames -\row \o \l {Text} \o Allows the use of formatted text in a scene -\row \o \l {TextInput} \o Displays an editable line of text -\row \o \l {IntValidator} \o Validator for integer values -\row \o \l {DoubleValidator} \o Validator for non-integer values -\row \o \l {RegExpValidator} \o Validator for string regular expressions -\row \o \l {TextEdit} \o Displays multiple lines of editable formatted text - -\header \o {2,1} \bold {Basic Interaction Items} -\row \o \l {MouseArea} \o Handles mouse interactions -\row \o \l {FocusScope} \o For keyboard focus handling -\row \o \l {Flickable} \o Provides a surface that can be "flicked" -\row \o \l {Flipable} \o Provides a surface that produces flipping effects -\row \o \l {GestureArea} (experimental) \o Enables simple gesture handling - -\header \o {2,1} \bold {States} -\row \o \l {State} \o Defines sets of configurations of objects and properties -\row \o \l {PropertyChanges} \o Describes property changes within a state -\row \o \l {StateGroup} \o Contains a set of states and state transitions -\row \o \l {StateChangeScript} \o Allows script binding in a state -\row \o \l {ParentChange} (Item-specific) \o Re-parent an Item in a state change -\row \o \l {AnchorChanges} \o Change the anchors of an item in a state - -\header \o {2,1} \bold {Animation and Transitions} -\row \o \l {Behavior} \o Specifies a default animation for property changes -\row \o \l {SequentialAnimation} \o Runs animations sequentially -\row \o \l {ParallelAnimation} \o Runs animations in parallel -\row \o \l {PropertyAnimation} \o Animates property changes -\row \o \l {NumberAnimation} \o Animates properties of type qreal -\row \o \l {Vector3dAnimation} \o Animates properties of type QVector3d -\row \o \l {ColorAnimation} \o Animates color changes -\row \o \l {RotationAnimation} \o Animates rotations -\row \o \l {ParentAnimation} \o Animates parent changes -\row \o \l {AnchorAnimation} \o Animates anchor changes -\row \o \l {PauseAnimation} \o Pauses an animation -\row \o \l {SmoothedAnimation} \o Allows a property to smoothly track a value -\row \o \l {SpringAnimation} \o Allows a property to track a value in a spring-like motion -\row \o \l {PropertyAction} \o Sets immediate property changes during animation -\row \o \l {ScriptAction} \o Runs scripts during an animation -\row \o \l {Transition} \o Animates transitions during state changes - -\header \o {2,1} \bold {Working with Data} -\row \o \l {Binding} \o Binds any value to any property -\row \o \l {ListModel} \o Defines a list of data -\row \o \l {ListElement} \o Defines a data item in a \l {ListModel} -\row \o \l {VisualItemModel} \o Contains items that already defines its own visual delegate -\row \o \l {VisualDataModel} \o Encapsulates a model and a delegate -\row \o \l {Package} \o Collection that enables sharing of items within different views -\row \o \l {XmlListModel} \o Specifies a model using XPath expressions -\row \o \l {XmlRole} \o Specifies a role for an \l {XmlListModel} - -\header \o {2,1} \bold {Views} -\row \o \l {ListView} \o Provides a list visualization of a model -\row \o \l {GridView} \o Provides a grid visualization of a model -\row \o \l {PathView} \o Visualizes a model's contents along a path -\row \o \l {Path} \o Defines a path used by \l {PathView} -\row \o \l {PathLine} \o Defines a line in \l {Path} -\row \o \l {PathQuad} \o Defines a quadratic Bezier curve in a \l {Path} -\row \o \l {PathCubic} \o Defines a cubic Bezier curve in a \l {Path} -\row \o \l {PathAttribute} \o Allows the setting of attributes along a \l {Path} -\row \o \l {PathPercent} \o Modifies the item distribution along a \l {Path} -\row \o \l {WebView} \o Allows the addition of web content to a canvas - -\header \o {2,1} \bold {Positioners} -\row \o \l {Column} \o Arranges its children vertically -\row \o \l {Row} \o Arranges its children horizontally -\row \o \l {Grid} \o Positions its children in a grid -\row \o \l {Flow} \o Positions its children with wrapping support - -\header \o {2,1} \bold {Utility} -\row \o \l {Connections} \o Explicitly connects signals and signal handlers -\row \o \l {Component} \o Encapsulate QML items as a component -\row \o \l {Timer} \o Provides timed triggers -\row \o \l {QML:QtObject} {QtObject} \o Basic element containing only the objectName property -\row \o \l {QML:Qt} {Qt} \o The QML global Qt object provides useful enums and functions from Qt. -\row \o \l {WorkerScript} \o Enables the use of threads in QML -\row \o \l {Loader} \o Controls the loading of items or components -\row \o \l {Repeater} \o Uses a model to create multiples of components -\row \o \l {SystemPalette} \o Provides access to the Qt palettes -\row \o \l {FontLoader} \o Loads fonts by name or URL -\row \o \l {LayoutItem} \o Allows declarative UI elements inside Qt's Graphics View layouts - -\header \o {2,1} \bold {Transforms} -\row \o \l {Scale} \o Assigns item scaling behaviors -\row \o \l {Rotation} \o Assigns item rotation behaviors -\row \o \l {Translate} \o Assigns item translation behaviors - -\header \o {2,1} \bold {Effects} -\row \o \l {Particles} (experimental) \o Generates and animates particles -\row \o \l {ParticleMotionLinear} \o Adds linear motion behavior to \l {Particles} -\row \o \l {ParticleMotionGravity} \o Adds gravitational motion to \l {Particles} -\row \o \l {ParticleMotionWander} \o Adds varied motions to \l {Particles} -\endtable + \page qdeclarativeelements.html + \target elements + \title QML Elements + This is a dictionary of all the QML elements available in the \l + {QtDeclarative} {Qt Declarative} module. + + To see the QML elements listed by + functional area, \l{Groups Of Related QML Elements} {look here}. + + \generatelist qmlclasses + +*/ + + +/*! + \group qml-groups + \title Groups Of Related QML Elements + + \brief If you know what kind of QML element you want (Basic Visual, + Interaction, Animation, etc), look here. + + This is a list of functional groups of QML elements. + + \generatelist{related} + +*/ + +/*! + \group qml-basic-visual-elements + \title Basic QML Visual Elements + \ingroup qml-groups + + \brief Elements for constructing basic visual items. + + \generatelist{related} + +*/ + +/*! + \group qml-basic-interaction-elements + \title Basic QML Interaction Elements + \ingroup qml-groups + + \brief Elements for handling basic interactions. + + \generatelist{related} + +*/ + +/*! + \group qml-state-elements + \title QML State Elements + \ingroup qml-groups + + \brief Elements for handling state changes. + + \generatelist{related} + +*/ + +/*! + \group qml-event-elements + \title QML Event Elements + \ingroup qml-groups + + \brief Elements for handling events. + + \generatelist{related} + +*/ + +/*! + \group qml-animation-transition + \title QML Animation and Transition Elements + \ingroup qml-groups + + \brief Elements for handling animations and transitions. + + \generatelist{related} + +*/ + +/*! + \group qml-working-with-data + \title Working With Data in QML + \ingroup qml-groups + + \brief Elements for working with data. + + \generatelist{related} + +*/ + +/*! + \group qml-view-elements + \title QML View Elements + \ingroup qml-groups + + \brief Elements for handling views. + + \generatelist{related} + +*/ + +/*! + \group qml-positioning-elements + \title QML Positioning Elements + \ingroup qml-groups + + \brief Elements for positioning items. + + \generatelist{related} + +*/ + +/*! + \group qml-utility-elements + \title QML Utility Elements + \ingroup qml-groups + + \brief Elements for handling misc operations. + + \generatelist{related} + +*/ + +/*! + \group qml-transform-elements + \title QML Transform Elements + \ingroup qml-groups + + \brief Elements for handling transformations. + + \generatelist{related} + +*/ + +/*! + \group qml-particle-elements + \title QML Particle Elements + \ingroup qml-groups + + \brief Elements for handling particle effects. + + \generatelist{related} */ diff --git a/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp b/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp index 9dcba60..c1ca23d 100644 --- a/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp +++ b/src/3rdparty/webkit/WebKit/qt/declarative/qdeclarativewebview.cpp @@ -139,6 +139,7 @@ void GraphicsWebView::mouseMoveEvent(QGraphicsSceneMouseEvent* event) /*! \qmlclass WebView QDeclarativeWebView + \ingroup qml-view-elements \since 4.7 \brief The WebView item allows you to add web content to a canvas. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp b/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp index d8527d3..e0a2149 100644 --- a/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp +++ b/src/declarative/graphicsitems/qdeclarativeanimatedimage.cpp @@ -62,7 +62,8 @@ QT_BEGIN_NAMESPACE \qmlclass AnimatedImage QDeclarativeAnimatedImage \inherits Image \since 4.7 - + \ingroup basic-visual-elements + The AnimatedImage element provides for playing animations stored as images containing a series of frames, such as GIF files. diff --git a/src/declarative/graphicsitems/qdeclarativeborderimage.cpp b/src/declarative/graphicsitems/qdeclarativeborderimage.cpp index 4881248..e0c7fc2 100644 --- a/src/declarative/graphicsitems/qdeclarativeborderimage.cpp +++ b/src/declarative/graphicsitems/qdeclarativeborderimage.cpp @@ -56,6 +56,7 @@ QT_BEGIN_NAMESPACE \brief The BorderImage element provides an image that can be used as a border. \inherits Item \since 4.7 + \ingroup qm-basic-visual-elements A BorderImage breaks an image into 9 sections, as shown below: diff --git a/src/declarative/graphicsitems/qdeclarativeevents.cpp b/src/declarative/graphicsitems/qdeclarativeevents.cpp index 81ec6e1..0a35a3f 100644 --- a/src/declarative/graphicsitems/qdeclarativeevents.cpp +++ b/src/declarative/graphicsitems/qdeclarativeevents.cpp @@ -45,6 +45,8 @@ QT_BEGIN_NAMESPACE /*! \qmlclass KeyEvent QDeclarativeKeyEvent \since 4.7 + \ingroup qml-event-elements + \brief The KeyEvent object provides information about a key event. For example, the following changes the Item's state property when the Enter @@ -115,6 +117,8 @@ Item { /*! \qmlclass MouseEvent QDeclarativeMouseEvent \since 4.7 + \ingroup qml-event-elements + \brief The MouseEvent object provides information about a mouse event. The position of the mouse can be found via the x and y properties. diff --git a/src/declarative/graphicsitems/qdeclarativeflickable.cpp b/src/declarative/graphicsitems/qdeclarativeflickable.cpp index 19cabdd..31f7707 100644 --- a/src/declarative/graphicsitems/qdeclarativeflickable.cpp +++ b/src/declarative/graphicsitems/qdeclarativeflickable.cpp @@ -345,6 +345,8 @@ void QDeclarativeFlickablePrivate::updateBeginningEnd() /*! \qmlclass Flickable QDeclarativeFlickable \since 4.7 + \ingroup qml-basic-interaction-elements + \brief The Flickable item provides a surface that can be "flicked". \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativeflipable.cpp b/src/declarative/graphicsitems/qdeclarativeflipable.cpp index b266273..6ce0fa6 100644 --- a/src/declarative/graphicsitems/qdeclarativeflipable.cpp +++ b/src/declarative/graphicsitems/qdeclarativeflipable.cpp @@ -70,6 +70,8 @@ public: /*! \qmlclass Flipable QDeclarativeFlipable \since 4.7 + \ingroup qml-basic-interaction-elements + \brief The Flipable item provides a surface that can be flipped. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativefocuspanel.cpp b/src/declarative/graphicsitems/qdeclarativefocuspanel.cpp index bd60e25..5c7959a 100644 --- a/src/declarative/graphicsitems/qdeclarativefocuspanel.cpp +++ b/src/declarative/graphicsitems/qdeclarativefocuspanel.cpp @@ -51,6 +51,8 @@ QT_BEGIN_NAMESPACE /*! \qmlclass FocusPanel QDeclarativeFocusPanel \since 4.7 + \ingroup qml-basic-interaction-elements + \brief The FocusPanel item explicitly creates a focus panel. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativefocusscope.cpp b/src/declarative/graphicsitems/qdeclarativefocusscope.cpp index e8e6fa2..4498275 100644 --- a/src/declarative/graphicsitems/qdeclarativefocusscope.cpp +++ b/src/declarative/graphicsitems/qdeclarativefocusscope.cpp @@ -48,6 +48,8 @@ QT_BEGIN_NAMESPACE /*! \qmlclass FocusScope QDeclarativeFocusScope \since 4.7 + \ingroup qml-basic-interaction-elements + \brief The FocusScope object explicitly creates a focus scope. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativegridview.cpp b/src/declarative/graphicsitems/qdeclarativegridview.cpp index 68a4c64..d67e69a 100644 --- a/src/declarative/graphicsitems/qdeclarativegridview.cpp +++ b/src/declarative/graphicsitems/qdeclarativegridview.cpp @@ -1056,6 +1056,8 @@ void QDeclarativeGridViewPrivate::flick(AxisData &data, qreal minExtent, qreal m /*! \qmlclass GridView QDeclarativeGridView \since 4.7 + \ingroup qml-view-elements + \inherits Flickable \brief The GridView item provides a grid view of items provided by a model. diff --git a/src/declarative/graphicsitems/qdeclarativeimage.cpp b/src/declarative/graphicsitems/qdeclarativeimage.cpp index 37736cc..47a410c 100644 --- a/src/declarative/graphicsitems/qdeclarativeimage.cpp +++ b/src/declarative/graphicsitems/qdeclarativeimage.cpp @@ -51,6 +51,8 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Image QDeclarativeImage \since 4.7 + \ingroup qml-vasic-visual-elements + \brief The Image element allows you to add bitmaps to a scene. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativeitem.cpp b/src/declarative/graphicsitems/qdeclarativeitem.cpp index cc7c673..0f16a79 100644 --- a/src/declarative/graphicsitems/qdeclarativeitem.cpp +++ b/src/declarative/graphicsitems/qdeclarativeitem.cpp @@ -69,6 +69,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Transform QGraphicsTransform + \ingroup qml-transform-elements \since 4.7 \brief The Transform elements provide a way of building advanced transformations on Items. @@ -90,6 +91,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Translate QDeclarativeTranslate + \ingroup qml-transform-elements \since 4.7 \brief The Translate object provides a way to move an Item without changing its x or y properties. @@ -131,6 +133,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Scale QGraphicsScale + \ingroup qml-transform-elements \since 4.7 \brief The Scale element provides a way to scale an Item. @@ -172,6 +175,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Rotation QGraphicsRotation + \ingroup qml-transform-elements \since 4.7 \brief The Rotation object provides a way to rotate an Item. @@ -419,6 +423,7 @@ void QDeclarativeItemKeyFilter::componentComplete() /*! \qmlclass KeyNavigation QDeclarativeKeyNavigationAttached + \ingroup qml-basic-interaction-elements \since 4.7 \brief The KeyNavigation attached property supports key navigation by arrow keys. @@ -725,6 +730,7 @@ void QDeclarativeKeyNavigationAttached::keyReleased(QKeyEvent *event, bool post) /*! \qmlclass Keys QDeclarativeKeysAttached + \ingroup qml-basic-interaction-elements \since 4.7 \brief The Keys attached property provides key handling to Items. @@ -1310,6 +1316,7 @@ QDeclarativeKeysAttached *QDeclarativeKeysAttached::qmlAttachedProperties(QObjec /*! \qmlclass Item QDeclarativeItem + \ingroup qml-basic-visual-elements \since 4.7 \brief The Item is the most basic of all visual items in QML. diff --git a/src/declarative/graphicsitems/qdeclarativelayoutitem.cpp b/src/declarative/graphicsitems/qdeclarativelayoutitem.cpp index 38d5f59..8509473 100644 --- a/src/declarative/graphicsitems/qdeclarativelayoutitem.cpp +++ b/src/declarative/graphicsitems/qdeclarativelayoutitem.cpp @@ -49,6 +49,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass LayoutItem QDeclarativeLayoutItem + \ingroup qml-utility-elements \since 4.7 \brief The LayoutItem element allows declarative UI elements to be placed inside Qt's Graphics View layouts. diff --git a/src/declarative/graphicsitems/qdeclarativelistview.cpp b/src/declarative/graphicsitems/qdeclarativelistview.cpp index e1dd1c0..ec1b6cf 100644 --- a/src/declarative/graphicsitems/qdeclarativelistview.cpp +++ b/src/declarative/graphicsitems/qdeclarativelistview.cpp @@ -1357,6 +1357,7 @@ void QDeclarativeListViewPrivate::flick(AxisData &data, qreal minExtent, qreal m /*! \qmlclass ListView QDeclarativeListView + \ingroup qml-view-elements \since 4.7 \inherits Flickable \brief The ListView item provides a list view of items provided by a model. diff --git a/src/declarative/graphicsitems/qdeclarativeloader.cpp b/src/declarative/graphicsitems/qdeclarativeloader.cpp index d28181e..4c6268f 100644 --- a/src/declarative/graphicsitems/qdeclarativeloader.cpp +++ b/src/declarative/graphicsitems/qdeclarativeloader.cpp @@ -108,6 +108,7 @@ void QDeclarativeLoaderPrivate::initResize() /*! \qmlclass Loader QDeclarativeLoader + \ingroup qml-utility-elements \since 4.7 \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativemousearea.cpp b/src/declarative/graphicsitems/qdeclarativemousearea.cpp index dcdb9f6..2823888 100644 --- a/src/declarative/graphicsitems/qdeclarativemousearea.cpp +++ b/src/declarative/graphicsitems/qdeclarativemousearea.cpp @@ -180,6 +180,7 @@ QDeclarativeMouseAreaPrivate::~QDeclarativeMouseAreaPrivate() /*! \qmlclass MouseArea QDeclarativeMouseArea + \ingroup qml-basic-interaction-elements \since 4.7 \brief The MouseArea item enables simple mouse handling. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativepath.cpp b/src/declarative/graphicsitems/qdeclarativepath.cpp index c48011d3..62e03e7 100644 --- a/src/declarative/graphicsitems/qdeclarativepath.cpp +++ b/src/declarative/graphicsitems/qdeclarativepath.cpp @@ -51,6 +51,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass PathElement QDeclarativePathElement + \ingroup qml-view-elements \since 4.7 \brief PathElement is the base path type. @@ -67,6 +68,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Path QDeclarativePath + \ingroup qml-view-elements \since 4.7 \brief A Path object defines a path for use by \l PathView. @@ -497,6 +499,7 @@ void QDeclarativeCurve::setY(qreal y) /*! \qmlclass PathAttribute QDeclarativePathAttribute + \ingroup qml-view-elements \since 4.7 \brief The PathAttribute allows setting an attribute at a given position in a Path. @@ -587,6 +590,7 @@ void QDeclarativePathAttribute::setValue(qreal value) /*! \qmlclass PathLine QDeclarativePathLine + \ingroup qml-view-elements \since 4.7 \brief The PathLine defines a straight line. @@ -627,6 +631,7 @@ void QDeclarativePathLine::addToPath(QPainterPath &path) /*! \qmlclass PathQuad QDeclarativePathQuad + \ingroup qml-view-elements \since 4.7 \brief The PathQuad defines a quadratic Bezier curve with a control point. @@ -713,6 +718,7 @@ void QDeclarativePathQuad::addToPath(QPainterPath &path) /*! \qmlclass PathCubic QDeclarativePathCubic + \ingroup qml-view-elements \since 4.7 \brief The PathCubic defines a cubic Bezier curve with two control points. @@ -828,6 +834,7 @@ void QDeclarativePathCubic::addToPath(QPainterPath &path) /*! \qmlclass PathPercent QDeclarativePathPercent + \ingroup qml-view-elements \since 4.7 \brief The PathPercent manipulates the way a path is interpreted. diff --git a/src/declarative/graphicsitems/qdeclarativepathview.cpp b/src/declarative/graphicsitems/qdeclarativepathview.cpp index 380c6ad..535fb90 100644 --- a/src/declarative/graphicsitems/qdeclarativepathview.cpp +++ b/src/declarative/graphicsitems/qdeclarativepathview.cpp @@ -326,6 +326,7 @@ void QDeclarativePathViewPrivate::regenerate() /*! \qmlclass PathView QDeclarativePathView + \ingroup qml-view-elements \since 4.7 \brief The PathView element lays out model-provided items on a path. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativepositioners.cpp b/src/declarative/graphicsitems/qdeclarativepositioners.cpp index 179f13d..5c21b03 100644 --- a/src/declarative/graphicsitems/qdeclarativepositioners.cpp +++ b/src/declarative/graphicsitems/qdeclarativepositioners.cpp @@ -310,6 +310,7 @@ static inline bool isInvisible(QDeclarativeItem *child) /*! \qmlclass Column QDeclarativeColumn + \ingroup qml-positioning-elements \since 4.7 \brief The Column item arranges its children vertically. \inherits Item @@ -475,6 +476,7 @@ void QDeclarativeColumn::reportConflictingAnchors() /*! \qmlclass Row QDeclarativeRow + \ingroup qml-positioning-elements \since 4.7 \brief The Row item arranges its children horizontally. \inherits Item @@ -613,6 +615,7 @@ void QDeclarativeRow::reportConflictingAnchors() /*! \qmlclass Grid QDeclarativeGrid + \ingroup qml-positioning-elements \since 4.7 \brief The Grid item positions its children in a grid. \inherits Item @@ -905,6 +908,7 @@ void QDeclarativeGrid::reportConflictingAnchors() /*! \qmlclass Flow QDeclarativeFlow + \ingroup qml-positioning-elements \since 4.7 \brief The Flow item arranges its children side by side, wrapping as necessary. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativerectangle.cpp b/src/declarative/graphicsitems/qdeclarativerectangle.cpp index c49be46..5990c2d 100644 --- a/src/declarative/graphicsitems/qdeclarativerectangle.cpp +++ b/src/declarative/graphicsitems/qdeclarativerectangle.cpp @@ -84,6 +84,7 @@ void QDeclarativePen::setWidth(int w) /*! \qmlclass GradientStop QDeclarativeGradientStop + \ingroup qml-basic-visual-elements \since 4.7 \brief The GradientStop item defines the color at a position in a Gradient @@ -105,6 +106,7 @@ void QDeclarativeGradientStop::updateGradient() /*! \qmlclass Gradient QDeclarativeGradient + \ingroup qml-basic-visual-elements \since 4.7 \brief The Gradient item defines a gradient fill. @@ -152,6 +154,7 @@ void QDeclarativeGradient::doUpdate() /*! \qmlclass Rectangle QDeclarativeRectangle + \ingroup qml-basic-visual-elements \since 4.7 \brief The Rectangle item allows you to add rectangles to a scene. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativerepeater.cpp b/src/declarative/graphicsitems/qdeclarativerepeater.cpp index 68e7e9a..8828d3e 100644 --- a/src/declarative/graphicsitems/qdeclarativerepeater.cpp +++ b/src/declarative/graphicsitems/qdeclarativerepeater.cpp @@ -62,6 +62,7 @@ QDeclarativeRepeaterPrivate::~QDeclarativeRepeaterPrivate() /*! \qmlclass Repeater QDeclarativeRepeater + \ingroup qml-utility-elements \since 4.7 \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativetext.cpp b/src/declarative/graphicsitems/qdeclarativetext.cpp index ab2be9c..fcd112e 100644 --- a/src/declarative/graphicsitems/qdeclarativetext.cpp +++ b/src/declarative/graphicsitems/qdeclarativetext.cpp @@ -162,7 +162,8 @@ QSet QTextDocumentWithImageResources::errors; /*! \qmlclass Text QDeclarativeText - \since 4.7 + \ingroup qml-basic-visual-elements + \since 4.7 \brief The Text item allows you to add formatted text to a scene. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativetextedit.cpp b/src/declarative/graphicsitems/qdeclarativetextedit.cpp index 8117676..b8e8726 100644 --- a/src/declarative/graphicsitems/qdeclarativetextedit.cpp +++ b/src/declarative/graphicsitems/qdeclarativetextedit.cpp @@ -61,6 +61,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass TextEdit QDeclarativeTextEdit + \ingroup qml-basic-visual-elements \since 4.7 \brief The TextEdit item displays multiple lines of editable formatted text. \inherits Item diff --git a/src/declarative/graphicsitems/qdeclarativetextinput.cpp b/src/declarative/graphicsitems/qdeclarativetextinput.cpp index 90f5a70..bd8d404 100644 --- a/src/declarative/graphicsitems/qdeclarativetextinput.cpp +++ b/src/declarative/graphicsitems/qdeclarativetextinput.cpp @@ -57,6 +57,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass TextInput QDeclarativeTextInput + \ingroup qml-basic-visual-elements \since 4.7 \brief The TextInput item displays an editable line of text. \inherits Item @@ -561,6 +562,7 @@ void QDeclarativeTextInput::setAutoScroll(bool b) /*! \qmlclass IntValidator QIntValidator + \ingroup qml-basic-visual-elements This element provides a validator for integer values. */ @@ -579,6 +581,7 @@ void QDeclarativeTextInput::setAutoScroll(bool b) /*! \qmlclass DoubleValidator QDoubleValidator + \ingroup qml-basic-visual-elements This element provides a validator for non-integer numbers. */ @@ -617,6 +620,7 @@ void QDeclarativeTextInput::setAutoScroll(bool b) /*! \qmlclass RegExpValidator QRegExpValidator + \ingroup qml-basic-visual-elements This element provides a validator, which counts as valid any string which matches a specified regular expression. diff --git a/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp b/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp index a489b5a..764676a 100644 --- a/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp +++ b/src/declarative/graphicsitems/qdeclarativevisualitemmodel.cpp @@ -128,6 +128,7 @@ public: /*! \qmlclass VisualItemModel QDeclarativeVisualItemModel + \ingroup qml-working-with-data \since 4.7 \brief The VisualItemModel allows items to be provided to a view. @@ -644,6 +645,7 @@ QDeclarativeVisualDataModelData *QDeclarativeVisualDataModelPrivate::data(QObjec /*! \qmlclass VisualDataModel QDeclarativeVisualDataModel + \ingroup qml-working-with-data \brief The VisualDataModel encapsulates a model and delegate A VisualDataModel encapsulates a model and the delegate that will diff --git a/src/declarative/qml/qdeclarativecomponent.cpp b/src/declarative/qml/qdeclarativecomponent.cpp index 5f4a063..73689fc 100644 --- a/src/declarative/qml/qdeclarativecomponent.cpp +++ b/src/declarative/qml/qdeclarativecomponent.cpp @@ -104,6 +104,7 @@ class QByteArray; /*! \qmlclass Component QDeclarativeComponent + \ingroup qml-utility-elements \since 4.7 \brief The Component element encapsulates a QML component definition. diff --git a/src/declarative/qml/qdeclarativeengine.cpp b/src/declarative/qml/qdeclarativeengine.cpp index de79e4d..1061c03 100644 --- a/src/declarative/qml/qdeclarativeengine.cpp +++ b/src/declarative/qml/qdeclarativeengine.cpp @@ -114,6 +114,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass QtObject QObject + \ingroup qml-utility-elements \since 4.7 \brief The QtObject element is the most basic element in QML. @@ -185,6 +186,7 @@ void QDeclarativeEnginePrivate::defineModule() /*! \qmlclass QML:Qt QDeclarativeEnginePrivate + \ingroup qml-utility-elements \brief The QML global Qt object provides useful enums and functions from Qt. \keyword QmlGlobalQtObject diff --git a/src/declarative/qml/qdeclarativeworkerscript.cpp b/src/declarative/qml/qdeclarativeworkerscript.cpp index aec84a6..789116e 100644 --- a/src/declarative/qml/qdeclarativeworkerscript.cpp +++ b/src/declarative/qml/qdeclarativeworkerscript.cpp @@ -514,6 +514,7 @@ void QDeclarativeWorkerScriptEngine::run() /*! \qmlclass WorkerScript QDeclarativeWorkerScript + \ingroup qml-utility-elements \brief The WorkerScript element enables the use of threads in QML. Use WorkerScript to run operations in a new thread. diff --git a/src/declarative/util/qdeclarativeanimation.cpp b/src/declarative/util/qdeclarativeanimation.cpp index 2fca09d..3b8cb37 100644 --- a/src/declarative/util/qdeclarativeanimation.cpp +++ b/src/declarative/util/qdeclarativeanimation.cpp @@ -74,6 +74,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Animation QDeclarativeAbstractAnimation + \ingroup qml-animation-transition \since 4.7 \brief The Animation element is the base of all QML animations. @@ -554,6 +555,7 @@ void QDeclarativeAbstractAnimation::timelineComplete() /*! \qmlclass PauseAnimation QDeclarativePauseAnimation + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The PauseAnimation element provides a pause for an animation. @@ -630,6 +632,7 @@ QAbstractAnimation *QDeclarativePauseAnimation::qtAnimation() /*! \qmlclass ColorAnimation QDeclarativeColorAnimation + \ingroup qml-animation-transition \since 4.7 \inherits PropertyAnimation \brief The ColorAnimation element animates changes in color values. @@ -730,6 +733,7 @@ void QDeclarativeColorAnimation::setTo(const QColor &t) /*! \qmlclass ScriptAction QDeclarativeScriptAction + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The ScriptAction element allows scripts to be run during an animation. @@ -878,6 +882,7 @@ QAbstractAnimation *QDeclarativeScriptAction::qtAnimation() /*! \qmlclass PropertyAction QDeclarativePropertyAction + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The PropertyAction element allows immediate property changes during animation. @@ -1129,6 +1134,7 @@ void QDeclarativePropertyAction::transition(QDeclarativeStateActions &actions, /*! \qmlclass NumberAnimation QDeclarativeNumberAnimation + \ingroup qml-animation-transition \since 4.7 \inherits PropertyAnimation \brief The NumberAnimation element animates changes in qreal-type values. @@ -1238,6 +1244,7 @@ void QDeclarativeNumberAnimation::setTo(qreal t) /*! \qmlclass Vector3dAnimation QDeclarativeVector3dAnimation + \ingroup qml-animation-transition \since 4.7 \inherits PropertyAnimation \brief The Vector3dAnimation element animates changes in QVector3d values. @@ -1311,6 +1318,7 @@ void QDeclarativeVector3dAnimation::setTo(QVector3D t) /*! \qmlclass RotationAnimation QDeclarativeRotationAnimation + \ingroup qml-animation-transition \since 4.7 \inherits PropertyAnimation \brief The RotationAnimation element animates changes in rotation values. @@ -1540,6 +1548,7 @@ QDeclarativeListProperty QDeclarativeAnimationGro /*! \qmlclass SequentialAnimation QDeclarativeSequentialAnimation + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The SequentialAnimation element allows animations to be run sequentially. @@ -1613,6 +1622,7 @@ void QDeclarativeSequentialAnimation::transition(QDeclarativeStateActions &actio /*! \qmlclass ParallelAnimation QDeclarativeParallelAnimation + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The ParallelAnimation element allows animations to be run in parallel. @@ -1731,6 +1741,7 @@ void QDeclarativePropertyAnimationPrivate::convertVariant(QVariant &variant, int /*! \qmlclass PropertyAnimation QDeclarativePropertyAnimation + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The PropertyAnimation element animates changes in property values. @@ -2400,6 +2411,7 @@ void QDeclarativePropertyAnimation::transition(QDeclarativeStateActions &actions /*! \qmlclass ParentAnimation QDeclarativeParentAnimation + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The ParentAnimation element animates changes in parent values. @@ -2759,6 +2771,7 @@ QAbstractAnimation *QDeclarativeParentAnimation::qtAnimation() /*! \qmlclass AnchorAnimation QDeclarativeAnchorAnimation + \ingroup qml-animation-transition \since 4.7 \inherits Animation \brief The AnchorAnimation element animates changes in anchor values. diff --git a/src/declarative/util/qdeclarativebehavior.cpp b/src/declarative/util/qdeclarativebehavior.cpp index 1e7f81a..f1b6f9a 100644 --- a/src/declarative/util/qdeclarativebehavior.cpp +++ b/src/declarative/util/qdeclarativebehavior.cpp @@ -72,6 +72,7 @@ public: /*! \qmlclass Behavior QDeclarativeBehavior + \ingroup qml-animation-transition \since 4.7 \brief The Behavior element allows you to specify a default animation for a property change. diff --git a/src/declarative/util/qdeclarativebind.cpp b/src/declarative/util/qdeclarativebind.cpp index 5fab631..86d08f5 100644 --- a/src/declarative/util/qdeclarativebind.cpp +++ b/src/declarative/util/qdeclarativebind.cpp @@ -72,6 +72,7 @@ public: /*! \qmlclass Binding QDeclarativeBind + \ingroup qml-working-with-data \since 4.7 \brief The Binding element allows arbitrary property bindings to be created. diff --git a/src/declarative/util/qdeclarativeconnections.cpp b/src/declarative/util/qdeclarativeconnections.cpp index b364821..293928e 100644 --- a/src/declarative/util/qdeclarativeconnections.cpp +++ b/src/declarative/util/qdeclarativeconnections.cpp @@ -71,6 +71,7 @@ public: /*! \qmlclass Connections QDeclarativeConnections + \ingroup qml-utility-elements \since 4.7 \brief A Connections element describes generalized connections to signals. diff --git a/src/declarative/util/qdeclarativefontloader.cpp b/src/declarative/util/qdeclarativefontloader.cpp index 83bdb17..291583c 100644 --- a/src/declarative/util/qdeclarativefontloader.cpp +++ b/src/declarative/util/qdeclarativefontloader.cpp @@ -78,6 +78,7 @@ public: /*! \qmlclass FontLoader QDeclarativeFontLoader + \ingroup qml-utility-elements \since 4.7 \brief The FontLoader element allows fonts to be loaded by name or URL. diff --git a/src/declarative/util/qdeclarativelistmodel.cpp b/src/declarative/util/qdeclarativelistmodel.cpp index 20fe3a9..1f66f0f 100644 --- a/src/declarative/util/qdeclarativelistmodel.cpp +++ b/src/declarative/util/qdeclarativelistmodel.cpp @@ -68,6 +68,7 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM /*! \qmlclass ListModel QDeclarativeListModel + \ingroup qml-working-with-data \since 4.7 \brief The ListModel element defines a free-form list data source. @@ -129,7 +130,7 @@ QDeclarativeListModelParser::ListInstruction *QDeclarativeListModelParser::ListM \snippet examples/declarative/threading/threadedlistmodel/dataloader.js 0 - The application's \tt Timer object periodically sends a message to the +working-with-data worker script by calling \l WorkerScript::sendMessage(). When this message is received, \l {WorkerScript::onMessage}{WorkerScript.onMessage()} is invoked in \tt dataloader.js, which appends the current time to the list model. @@ -769,6 +770,7 @@ bool QDeclarativeListModelParser::definesEmptyList(const QString &s) /*! \qmlclass ListElement + \ingroup qml-working-with-data \since 4.7 \brief The ListElement element defines a data item in a ListModel. diff --git a/src/declarative/util/qdeclarativepackage.cpp b/src/declarative/util/qdeclarativepackage.cpp index 1a4f2a7..a5ec9b3 100644 --- a/src/declarative/util/qdeclarativepackage.cpp +++ b/src/declarative/util/qdeclarativepackage.cpp @@ -48,6 +48,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Package QDeclarativePackage + \ingroup qml-working-with-data \brief Package provides a collection of named items. The Package class is used in conjunction with diff --git a/src/declarative/util/qdeclarativepropertychanges.cpp b/src/declarative/util/qdeclarativepropertychanges.cpp index 12c6353..25edd35 100644 --- a/src/declarative/util/qdeclarativepropertychanges.cpp +++ b/src/declarative/util/qdeclarativepropertychanges.cpp @@ -61,6 +61,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass PropertyChanges QDeclarativePropertyChanges + \ingroup qml-state-elements \since 4.7 \brief The PropertyChanges element describes new property bindings or values for a state. diff --git a/src/declarative/util/qdeclarativesmoothedanimation.cpp b/src/declarative/util/qdeclarativesmoothedanimation.cpp index 30e1491..b2f02e6 100644 --- a/src/declarative/util/qdeclarativesmoothedanimation.cpp +++ b/src/declarative/util/qdeclarativesmoothedanimation.cpp @@ -249,6 +249,7 @@ void QSmoothedAnimation::init() /*! \qmlclass SmoothedAnimation QDeclarativeSmoothedAnimation + \ingroup qml-animation-transition \since 4.7 \inherits NumberAnimation \brief The SmoothedAnimation element allows a property to smoothly track a value. diff --git a/src/declarative/util/qdeclarativespringanimation.cpp b/src/declarative/util/qdeclarativespringanimation.cpp index 6f4ac51..fce4097 100644 --- a/src/declarative/util/qdeclarativespringanimation.cpp +++ b/src/declarative/util/qdeclarativespringanimation.cpp @@ -228,6 +228,7 @@ void QDeclarativeSpringAnimationPrivate::updateMode() /*! \qmlclass SpringAnimation QDeclarativeSpringAnimation + \ingroup qml-animation-transition \inherits Animation \since 4.7 diff --git a/src/declarative/util/qdeclarativestate.cpp b/src/declarative/util/qdeclarativestate.cpp index 028bacb..6e17cf2 100644 --- a/src/declarative/util/qdeclarativestate.cpp +++ b/src/declarative/util/qdeclarativestate.cpp @@ -133,6 +133,7 @@ QDeclarativeStateOperation::QDeclarativeStateOperation(QObjectPrivate &dd, QObje /*! \qmlclass State QDeclarativeState + \ingroup qml-state-elements \since 4.7 \brief The State element defines configurations of objects and properties. diff --git a/src/declarative/util/qdeclarativestategroup.cpp b/src/declarative/util/qdeclarativestategroup.cpp index 1c1e964..fc90baa 100644 --- a/src/declarative/util/qdeclarativestategroup.cpp +++ b/src/declarative/util/qdeclarativestategroup.cpp @@ -88,6 +88,7 @@ public: /*! \qmlclass StateGroup QDeclarativeStateGroup + \ingroup qml-state-elements \since 4.7 \brief The StateGroup element provides state support for non-Item elements. diff --git a/src/declarative/util/qdeclarativestateoperations.cpp b/src/declarative/util/qdeclarativestateoperations.cpp index 2291c16..6e6f0cb 100644 --- a/src/declarative/util/qdeclarativestateoperations.cpp +++ b/src/declarative/util/qdeclarativestateoperations.cpp @@ -161,6 +161,7 @@ void QDeclarativeParentChangePrivate::doChange(QDeclarativeItem *targetParent, Q /*! \preliminary \qmlclass ParentChange QDeclarativeParentChange + \ingroup qml-state-elements \brief The ParentChange element allows you to reparent an Item in a state change. ParentChange reparents an item while preserving its visual appearance (position, size, @@ -589,6 +590,7 @@ public: /*! \qmlclass StateChangeScript QDeclarativeStateChangeScript + \ingroup qml-state-elements \brief The StateChangeScript element allows you to run a script in a state. A StateChangeScript is run upon entering a state. You can optionally use @@ -693,6 +695,7 @@ QString QDeclarativeStateChangeScript::typeName() const /*! \qmlclass AnchorChanges QDeclarativeAnchorChanges + \ingroup qml-state-elements \brief The AnchorChanges element allows you to change the anchors of an item in a state. The AnchorChanges element is used to modify the anchors of an item in a \l State. diff --git a/src/declarative/util/qdeclarativesystempalette.cpp b/src/declarative/util/qdeclarativesystempalette.cpp index c334859..7b80736 100644 --- a/src/declarative/util/qdeclarativesystempalette.cpp +++ b/src/declarative/util/qdeclarativesystempalette.cpp @@ -58,6 +58,7 @@ public: /*! \qmlclass SystemPalette QDeclarativeSystemPalette + \ingroup qml-utility-elements \since 4.7 \brief The SystemPalette element provides access to the Qt palettes. diff --git a/src/declarative/util/qdeclarativetimer.cpp b/src/declarative/util/qdeclarativetimer.cpp index 838a8f3..56320e6 100644 --- a/src/declarative/util/qdeclarativetimer.cpp +++ b/src/declarative/util/qdeclarativetimer.cpp @@ -70,6 +70,7 @@ public: /*! \qmlclass Timer QDeclarativeTimer + \ingroup qml-utility-elements \since 4.7 \brief The Timer item triggers a handler at a specified interval. diff --git a/src/declarative/util/qdeclarativetransition.cpp b/src/declarative/util/qdeclarativetransition.cpp index aa1426c..21d7ded 100644 --- a/src/declarative/util/qdeclarativetransition.cpp +++ b/src/declarative/util/qdeclarativetransition.cpp @@ -53,6 +53,7 @@ QT_BEGIN_NAMESPACE /*! \qmlclass Transition QDeclarativeTransition + \ingroup qml-animation-transition \since 4.7 \brief The Transition element defines animated transitions that occur on state changes. diff --git a/src/declarative/util/qdeclarativexmllistmodel.cpp b/src/declarative/util/qdeclarativexmllistmodel.cpp index 8bd829e..7b3d4a8 100644 --- a/src/declarative/util/qdeclarativexmllistmodel.cpp +++ b/src/declarative/util/qdeclarativexmllistmodel.cpp @@ -72,6 +72,7 @@ typedef QPair QDeclarativeXmlListRange; /*! \qmlclass XmlRole QDeclarativeXmlListModelRole + \ingroup qml-working-with-data \since 4.7 \brief The XmlRole element allows you to specify a role for an XmlListModel. @@ -505,6 +506,7 @@ void QDeclarativeXmlListModelPrivate::clear_role(QDeclarativeListPropertyroot()); findAllFunctions(tree->root()); findAllLegaleseTexts(tree->root()); @@ -751,6 +752,9 @@ int DitaXmlGenerator::generateAtom(const Atom *atom, else if (atom->string() == "classes") { generateCompactList(relative, marker, nonCompatClasses, true); } + else if (atom->string() == "qmlclasses") { + generateCompactList(relative, marker, qmlClasses, true); + } else if (atom->string().contains("classesbymodule")) { QString arg = atom->string().trimmed(); QString moduleName = atom->string().mid(atom->string().indexOf( @@ -3675,6 +3679,12 @@ void DitaXmlGenerator::findAllClasses(const InnerNode *node) if (!serviceName.isEmpty()) serviceClasses.insert(serviceName, *c); } + else if ((*c)->type() == Node::Fake && + (*c)->subType() == Node::QmlClass && + !(*c)->doc().isEmpty()) { + QString qmlClassName = (*c)->name(); + qmlClasses.insert(qmlClassName,*c); + } else if ((*c)->isInnerNode()) { findAllClasses(static_cast(*c)); } diff --git a/tools/qdoc3/htmlgenerator.cpp b/tools/qdoc3/htmlgenerator.cpp index 4603a40..50f8b56 100644 --- a/tools/qdoc3/htmlgenerator.cpp +++ b/tools/qdoc3/htmlgenerator.cpp @@ -376,6 +376,7 @@ void HtmlGenerator::generateTree(const Tree *tree, CodeMarker *marker) funcIndex.clear(); legaleseTexts.clear(); serviceClasses.clear(); + qmlClasses.clear(); findAllClasses(tree->root()); findAllFunctions(tree->root()); findAllLegaleseTexts(tree->root()); @@ -611,6 +612,9 @@ int HtmlGenerator::generateAtom(const Atom *atom, else if (atom->string() == "classes") { generateCompactList(relative, marker, nonCompatClasses, true); } + else if (atom->string() == "qmlclasses") { + generateCompactList(relative, marker, qmlClasses, true); + } else if (atom->string().contains("classesbymodule")) { QString arg = atom->string().trimmed(); QString moduleName = atom->string().mid(atom->string().indexOf( @@ -3707,6 +3711,12 @@ void HtmlGenerator::findAllClasses(const InnerNode *node) if (!serviceName.isEmpty()) serviceClasses.insert(serviceName, *c); } + else if ((*c)->type() == Node::Fake && + (*c)->subType() == Node::QmlClass && + !(*c)->doc().isEmpty()) { + QString qmlClassName = (*c)->name(); + qmlClasses.insert(qmlClassName,*c); + } else if ((*c)->isInnerNode()) { findAllClasses(static_cast(*c)); } diff --git a/tools/qdoc3/htmlgenerator.h b/tools/qdoc3/htmlgenerator.h index eab10c6..d885ada 100644 --- a/tools/qdoc3/htmlgenerator.h +++ b/tools/qdoc3/htmlgenerator.h @@ -330,6 +330,7 @@ class HtmlGenerator : public PageGenerator NodeMap obsoleteClasses; NodeMap namespaceIndex; NodeMap serviceClasses; + NodeMap qmlClasses; QMap funcIndex; QMap legaleseTexts; NewSinceMaps newSinceMaps; -- cgit v0.12