From 1b8c5a9431f34cc9188d39a9c39873a1e94bba6b Mon Sep 17 00:00:00 2001 From: aavit Date: Tue, 16 Feb 2010 13:12:31 +0100 Subject: Add libjpeg 8 This is a clean copy of libjpeg , except that some build scripts, test images etc. have been removed, as usual. Our configuration modifications will follow in a separate commit. --- src/3rdparty/libjpeg/README | 325 +++ src/3rdparty/libjpeg/ansi2knr.1 | 36 + src/3rdparty/libjpeg/ansi2knr.c | 739 ++++++ src/3rdparty/libjpeg/cderror.h | 134 + src/3rdparty/libjpeg/cdjpeg.h | 187 ++ src/3rdparty/libjpeg/change.log | 290 ++ src/3rdparty/libjpeg/cjpeg.1 | 325 +++ src/3rdparty/libjpeg/ckconfig.c | 402 +++ src/3rdparty/libjpeg/coderules.txt | 118 + src/3rdparty/libjpeg/djpeg.1 | 252 ++ src/3rdparty/libjpeg/example.c | 433 +++ src/3rdparty/libjpeg/filelist.txt | 215 ++ src/3rdparty/libjpeg/jaricom.c | 153 ++ src/3rdparty/libjpeg/jcapimin.c | 282 ++ src/3rdparty/libjpeg/jcapistd.c | 161 ++ src/3rdparty/libjpeg/jcarith.c | 934 +++++++ src/3rdparty/libjpeg/jccoefct.c | 453 ++++ src/3rdparty/libjpeg/jccolor.c | 459 ++++ src/3rdparty/libjpeg/jcdctmgr.c | 482 ++++ src/3rdparty/libjpeg/jchuff.c | 1576 +++++++++++ src/3rdparty/libjpeg/jcinit.c | 65 + src/3rdparty/libjpeg/jcmainct.c | 293 ++ src/3rdparty/libjpeg/jcmarker.c | 680 +++++ src/3rdparty/libjpeg/jcmaster.c | 842 ++++++ src/3rdparty/libjpeg/jcomapi.c | 106 + src/3rdparty/libjpeg/jconfig.bcc | 48 + src/3rdparty/libjpeg/jconfig.cfg | 45 + src/3rdparty/libjpeg/jconfig.dj | 38 + src/3rdparty/libjpeg/jconfig.mac | 43 + src/3rdparty/libjpeg/jconfig.manx | 43 + src/3rdparty/libjpeg/jconfig.mc6 | 52 + src/3rdparty/libjpeg/jconfig.sas | 43 + src/3rdparty/libjpeg/jconfig.st | 42 + src/3rdparty/libjpeg/jconfig.txt | 155 ++ src/3rdparty/libjpeg/jconfig.vc | 45 + src/3rdparty/libjpeg/jconfig.vms | 37 + src/3rdparty/libjpeg/jconfig.wat | 38 + src/3rdparty/libjpeg/jcparam.c | 632 +++++ src/3rdparty/libjpeg/jcprepct.c | 358 +++ src/3rdparty/libjpeg/jcsample.c | 545 ++++ src/3rdparty/libjpeg/jctrans.c | 382 +++ src/3rdparty/libjpeg/jdapimin.c | 396 +++ src/3rdparty/libjpeg/jdapistd.c | 275 ++ src/3rdparty/libjpeg/jdarith.c | 772 ++++++ src/3rdparty/libjpeg/jdatadst.c | 267 ++ src/3rdparty/libjpeg/jdatasrc.c | 274 ++ src/3rdparty/libjpeg/jdcoefct.c | 736 ++++++ src/3rdparty/libjpeg/jdcolor.c | 396 +++ src/3rdparty/libjpeg/jdct.h | 393 +++ src/3rdparty/libjpeg/jddctmgr.c | 382 +++ src/3rdparty/libjpeg/jdhuff.c | 1541 +++++++++++ src/3rdparty/libjpeg/jdinput.c | 661 +++++ src/3rdparty/libjpeg/jdmainct.c | 512 ++++ src/3rdparty/libjpeg/jdmarker.c | 1406 ++++++++++ src/3rdparty/libjpeg/jdmaster.c | 533 ++++ src/3rdparty/libjpeg/jdmerge.c | 400 +++ src/3rdparty/libjpeg/jdpostct.c | 290 ++ src/3rdparty/libjpeg/jdsample.c | 361 +++ src/3rdparty/libjpeg/jdtrans.c | 140 + src/3rdparty/libjpeg/jerror.c | 252 ++ src/3rdparty/libjpeg/jerror.h | 304 +++ src/3rdparty/libjpeg/jfdctflt.c | 174 ++ src/3rdparty/libjpeg/jfdctfst.c | 230 ++ src/3rdparty/libjpeg/jfdctint.c | 4348 ++++++++++++++++++++++++++++++ src/3rdparty/libjpeg/jidctflt.c | 242 ++ src/3rdparty/libjpeg/jidctfst.c | 368 +++ src/3rdparty/libjpeg/jidctint.c | 5137 ++++++++++++++++++++++++++++++++++++ src/3rdparty/libjpeg/jinclude.h | 91 + src/3rdparty/libjpeg/jmemansi.c | 167 ++ src/3rdparty/libjpeg/jmemdos.c | 638 +++++ src/3rdparty/libjpeg/jmemdosa.asm | 379 +++ src/3rdparty/libjpeg/jmemmac.c | 289 ++ src/3rdparty/libjpeg/jmemmgr.c | 1118 ++++++++ src/3rdparty/libjpeg/jmemname.c | 276 ++ src/3rdparty/libjpeg/jmemnobs.c | 109 + src/3rdparty/libjpeg/jmemsys.h | 198 ++ src/3rdparty/libjpeg/jmorecfg.h | 371 +++ src/3rdparty/libjpeg/jpegint.h | 407 +++ src/3rdparty/libjpeg/jpeglib.h | 1158 ++++++++ src/3rdparty/libjpeg/jpegtran.1 | 285 ++ src/3rdparty/libjpeg/jquant1.c | 856 ++++++ src/3rdparty/libjpeg/jquant2.c | 1310 +++++++++ src/3rdparty/libjpeg/jutils.c | 231 ++ src/3rdparty/libjpeg/jversion.h | 14 + src/3rdparty/libjpeg/libjpeg.map | 4 + src/3rdparty/libjpeg/libjpeg.txt | 3070 +++++++++++++++++++++ src/3rdparty/libjpeg/makcjpeg.st | 36 + src/3rdparty/libjpeg/makdjpeg.st | 36 + src/3rdparty/libjpeg/makeadsw.vc6 | 77 + src/3rdparty/libjpeg/makeasln.vc9 | 33 + src/3rdparty/libjpeg/makecdep.vc6 | 82 + src/3rdparty/libjpeg/makecdsp.vc6 | 130 + src/3rdparty/libjpeg/makecmak.vc6 | 159 ++ src/3rdparty/libjpeg/makecvcp.vc9 | 186 ++ src/3rdparty/libjpeg/makeddep.vc6 | 82 + src/3rdparty/libjpeg/makeddsp.vc6 | 130 + src/3rdparty/libjpeg/makedmak.vc6 | 159 ++ src/3rdparty/libjpeg/makedvcp.vc9 | 186 ++ src/3rdparty/libjpeg/makefile.ansi | 220 ++ src/3rdparty/libjpeg/makefile.bcc | 291 ++ src/3rdparty/libjpeg/makefile.dj | 226 ++ src/3rdparty/libjpeg/makefile.manx | 220 ++ src/3rdparty/libjpeg/makefile.mc6 | 255 ++ src/3rdparty/libjpeg/makefile.mms | 224 ++ src/3rdparty/libjpeg/makefile.sas | 258 ++ src/3rdparty/libjpeg/makefile.unix | 234 ++ src/3rdparty/libjpeg/makefile.vc | 217 ++ src/3rdparty/libjpeg/makefile.vms | 142 + src/3rdparty/libjpeg/makefile.wat | 239 ++ src/3rdparty/libjpeg/makejdep.vc6 | 423 +++ src/3rdparty/libjpeg/makejdsp.vc6 | 285 ++ src/3rdparty/libjpeg/makejdsw.vc6 | 29 + src/3rdparty/libjpeg/makejmak.vc6 | 425 +++ src/3rdparty/libjpeg/makejsln.vc9 | 17 + src/3rdparty/libjpeg/makejvcp.vc9 | 328 +++ src/3rdparty/libjpeg/makeproj.mac | 213 ++ src/3rdparty/libjpeg/makerdep.vc6 | 6 + src/3rdparty/libjpeg/makerdsp.vc6 | 78 + src/3rdparty/libjpeg/makermak.vc6 | 110 + src/3rdparty/libjpeg/makervcp.vc9 | 133 + src/3rdparty/libjpeg/maketdep.vc6 | 43 + src/3rdparty/libjpeg/maketdsp.vc6 | 122 + src/3rdparty/libjpeg/maketmak.vc6 | 131 + src/3rdparty/libjpeg/maketvcp.vc9 | 178 ++ src/3rdparty/libjpeg/makewdep.vc6 | 6 + src/3rdparty/libjpeg/makewdsp.vc6 | 78 + src/3rdparty/libjpeg/makewmak.vc6 | 110 + src/3rdparty/libjpeg/makewvcp.vc9 | 133 + src/3rdparty/libjpeg/makljpeg.st | 68 + src/3rdparty/libjpeg/maktjpeg.st | 30 + src/3rdparty/libjpeg/makvms.opt | 4 + src/3rdparty/libjpeg/rdjpgcom.1 | 63 + src/3rdparty/libjpeg/structure.txt | 945 +++++++ src/3rdparty/libjpeg/transupp.h | 210 ++ src/3rdparty/libjpeg/usage.txt | 617 +++++ src/3rdparty/libjpeg/wizard.txt | 211 ++ src/3rdparty/libjpeg/wrjpgcom.1 | 103 + 137 files changed, 53170 insertions(+) create mode 100644 src/3rdparty/libjpeg/README create mode 100644 src/3rdparty/libjpeg/ansi2knr.1 create mode 100644 src/3rdparty/libjpeg/ansi2knr.c create mode 100644 src/3rdparty/libjpeg/cderror.h create mode 100644 src/3rdparty/libjpeg/cdjpeg.h create mode 100644 src/3rdparty/libjpeg/change.log create mode 100644 src/3rdparty/libjpeg/cjpeg.1 create mode 100644 src/3rdparty/libjpeg/ckconfig.c create mode 100644 src/3rdparty/libjpeg/coderules.txt create mode 100644 src/3rdparty/libjpeg/djpeg.1 create mode 100644 src/3rdparty/libjpeg/example.c create mode 100644 src/3rdparty/libjpeg/filelist.txt create mode 100644 src/3rdparty/libjpeg/jaricom.c create mode 100644 src/3rdparty/libjpeg/jcapimin.c create mode 100644 src/3rdparty/libjpeg/jcapistd.c create mode 100644 src/3rdparty/libjpeg/jcarith.c create mode 100644 src/3rdparty/libjpeg/jccoefct.c create mode 100644 src/3rdparty/libjpeg/jccolor.c create mode 100644 src/3rdparty/libjpeg/jcdctmgr.c create mode 100644 src/3rdparty/libjpeg/jchuff.c create mode 100644 src/3rdparty/libjpeg/jcinit.c create mode 100644 src/3rdparty/libjpeg/jcmainct.c create mode 100644 src/3rdparty/libjpeg/jcmarker.c create mode 100644 src/3rdparty/libjpeg/jcmaster.c create mode 100644 src/3rdparty/libjpeg/jcomapi.c create mode 100644 src/3rdparty/libjpeg/jconfig.bcc create mode 100644 src/3rdparty/libjpeg/jconfig.cfg create mode 100644 src/3rdparty/libjpeg/jconfig.dj create mode 100644 src/3rdparty/libjpeg/jconfig.mac create mode 100644 src/3rdparty/libjpeg/jconfig.manx create mode 100644 src/3rdparty/libjpeg/jconfig.mc6 create mode 100644 src/3rdparty/libjpeg/jconfig.sas create mode 100644 src/3rdparty/libjpeg/jconfig.st create mode 100644 src/3rdparty/libjpeg/jconfig.txt create mode 100644 src/3rdparty/libjpeg/jconfig.vc create mode 100644 src/3rdparty/libjpeg/jconfig.vms create mode 100644 src/3rdparty/libjpeg/jconfig.wat create mode 100644 src/3rdparty/libjpeg/jcparam.c create mode 100644 src/3rdparty/libjpeg/jcprepct.c create mode 100644 src/3rdparty/libjpeg/jcsample.c create mode 100644 src/3rdparty/libjpeg/jctrans.c create mode 100644 src/3rdparty/libjpeg/jdapimin.c create mode 100644 src/3rdparty/libjpeg/jdapistd.c create mode 100644 src/3rdparty/libjpeg/jdarith.c create mode 100644 src/3rdparty/libjpeg/jdatadst.c create mode 100644 src/3rdparty/libjpeg/jdatasrc.c create mode 100644 src/3rdparty/libjpeg/jdcoefct.c create mode 100644 src/3rdparty/libjpeg/jdcolor.c create mode 100644 src/3rdparty/libjpeg/jdct.h create mode 100644 src/3rdparty/libjpeg/jddctmgr.c create mode 100644 src/3rdparty/libjpeg/jdhuff.c create mode 100644 src/3rdparty/libjpeg/jdinput.c create mode 100644 src/3rdparty/libjpeg/jdmainct.c create mode 100644 src/3rdparty/libjpeg/jdmarker.c create mode 100644 src/3rdparty/libjpeg/jdmaster.c create mode 100644 src/3rdparty/libjpeg/jdmerge.c create mode 100644 src/3rdparty/libjpeg/jdpostct.c create mode 100644 src/3rdparty/libjpeg/jdsample.c create mode 100644 src/3rdparty/libjpeg/jdtrans.c create mode 100644 src/3rdparty/libjpeg/jerror.c create mode 100644 src/3rdparty/libjpeg/jerror.h create mode 100644 src/3rdparty/libjpeg/jfdctflt.c create mode 100644 src/3rdparty/libjpeg/jfdctfst.c create mode 100644 src/3rdparty/libjpeg/jfdctint.c create mode 100644 src/3rdparty/libjpeg/jidctflt.c create mode 100644 src/3rdparty/libjpeg/jidctfst.c create mode 100644 src/3rdparty/libjpeg/jidctint.c create mode 100644 src/3rdparty/libjpeg/jinclude.h create mode 100644 src/3rdparty/libjpeg/jmemansi.c create mode 100644 src/3rdparty/libjpeg/jmemdos.c create mode 100644 src/3rdparty/libjpeg/jmemdosa.asm create mode 100644 src/3rdparty/libjpeg/jmemmac.c create mode 100644 src/3rdparty/libjpeg/jmemmgr.c create mode 100644 src/3rdparty/libjpeg/jmemname.c create mode 100644 src/3rdparty/libjpeg/jmemnobs.c create mode 100644 src/3rdparty/libjpeg/jmemsys.h create mode 100644 src/3rdparty/libjpeg/jmorecfg.h create mode 100644 src/3rdparty/libjpeg/jpegint.h create mode 100644 src/3rdparty/libjpeg/jpeglib.h create mode 100644 src/3rdparty/libjpeg/jpegtran.1 create mode 100644 src/3rdparty/libjpeg/jquant1.c create mode 100644 src/3rdparty/libjpeg/jquant2.c create mode 100644 src/3rdparty/libjpeg/jutils.c create mode 100644 src/3rdparty/libjpeg/jversion.h create mode 100644 src/3rdparty/libjpeg/libjpeg.map create mode 100644 src/3rdparty/libjpeg/libjpeg.txt create mode 100644 src/3rdparty/libjpeg/makcjpeg.st create mode 100644 src/3rdparty/libjpeg/makdjpeg.st create mode 100644 src/3rdparty/libjpeg/makeadsw.vc6 create mode 100644 src/3rdparty/libjpeg/makeasln.vc9 create mode 100644 src/3rdparty/libjpeg/makecdep.vc6 create mode 100644 src/3rdparty/libjpeg/makecdsp.vc6 create mode 100644 src/3rdparty/libjpeg/makecmak.vc6 create mode 100644 src/3rdparty/libjpeg/makecvcp.vc9 create mode 100644 src/3rdparty/libjpeg/makeddep.vc6 create mode 100644 src/3rdparty/libjpeg/makeddsp.vc6 create mode 100644 src/3rdparty/libjpeg/makedmak.vc6 create mode 100644 src/3rdparty/libjpeg/makedvcp.vc9 create mode 100644 src/3rdparty/libjpeg/makefile.ansi create mode 100644 src/3rdparty/libjpeg/makefile.bcc create mode 100644 src/3rdparty/libjpeg/makefile.dj create mode 100644 src/3rdparty/libjpeg/makefile.manx create mode 100644 src/3rdparty/libjpeg/makefile.mc6 create mode 100644 src/3rdparty/libjpeg/makefile.mms create mode 100644 src/3rdparty/libjpeg/makefile.sas create mode 100644 src/3rdparty/libjpeg/makefile.unix create mode 100644 src/3rdparty/libjpeg/makefile.vc create mode 100644 src/3rdparty/libjpeg/makefile.vms create mode 100644 src/3rdparty/libjpeg/makefile.wat create mode 100644 src/3rdparty/libjpeg/makejdep.vc6 create mode 100644 src/3rdparty/libjpeg/makejdsp.vc6 create mode 100644 src/3rdparty/libjpeg/makejdsw.vc6 create mode 100644 src/3rdparty/libjpeg/makejmak.vc6 create mode 100644 src/3rdparty/libjpeg/makejsln.vc9 create mode 100644 src/3rdparty/libjpeg/makejvcp.vc9 create mode 100644 src/3rdparty/libjpeg/makeproj.mac create mode 100644 src/3rdparty/libjpeg/makerdep.vc6 create mode 100644 src/3rdparty/libjpeg/makerdsp.vc6 create mode 100644 src/3rdparty/libjpeg/makermak.vc6 create mode 100644 src/3rdparty/libjpeg/makervcp.vc9 create mode 100644 src/3rdparty/libjpeg/maketdep.vc6 create mode 100644 src/3rdparty/libjpeg/maketdsp.vc6 create mode 100644 src/3rdparty/libjpeg/maketmak.vc6 create mode 100644 src/3rdparty/libjpeg/maketvcp.vc9 create mode 100644 src/3rdparty/libjpeg/makewdep.vc6 create mode 100644 src/3rdparty/libjpeg/makewdsp.vc6 create mode 100644 src/3rdparty/libjpeg/makewmak.vc6 create mode 100644 src/3rdparty/libjpeg/makewvcp.vc9 create mode 100644 src/3rdparty/libjpeg/makljpeg.st create mode 100644 src/3rdparty/libjpeg/maktjpeg.st create mode 100644 src/3rdparty/libjpeg/makvms.opt create mode 100644 src/3rdparty/libjpeg/rdjpgcom.1 create mode 100644 src/3rdparty/libjpeg/structure.txt create mode 100644 src/3rdparty/libjpeg/transupp.h create mode 100644 src/3rdparty/libjpeg/usage.txt create mode 100644 src/3rdparty/libjpeg/wizard.txt create mode 100644 src/3rdparty/libjpeg/wrjpgcom.1 diff --git a/src/3rdparty/libjpeg/README b/src/3rdparty/libjpeg/README new file mode 100644 index 0000000..7bc588f --- /dev/null +++ b/src/3rdparty/libjpeg/README @@ -0,0 +1,325 @@ +The Independent JPEG Group's JPEG software +========================================== + +README for release 8 of 10-Jan-2010 +=================================== + +This distribution contains the eighth public release of the Independent JPEG +Group's free JPEG software. You are welcome to redistribute this software and +to use it for any purpose, subject to the conditions under LEGAL ISSUES, below. + +This software is the work of Tom Lane, Guido Vollbeding, Philip Gladstone, +Bill Allombert, Jim Boucher, Lee Crocker, Bob Friesenhahn, Ben Jackson, +Julian Minguillon, Luis Ortiz, George Phillips, Davide Rossi, Ge' Weijers, +and other members of the Independent JPEG Group. + +IJG is not affiliated with the official ISO JPEG standards committee. + + +DOCUMENTATION ROADMAP +===================== + +This file contains the following sections: + +OVERVIEW General description of JPEG and the IJG software. +LEGAL ISSUES Copyright, lack of warranty, terms of distribution. +REFERENCES Where to learn more about JPEG. +ARCHIVE LOCATIONS Where to find newer versions of this software. +ACKNOWLEDGMENTS Special thanks. +FILE FORMAT WARS Software *not* to get. +TO DO Plans for future IJG releases. + +Other documentation files in the distribution are: + +User documentation: + install.txt How to configure and install the IJG software. + usage.txt Usage instructions for cjpeg, djpeg, jpegtran, + rdjpgcom, and wrjpgcom. + *.1 Unix-style man pages for programs (same info as usage.txt). + wizard.txt Advanced usage instructions for JPEG wizards only. + change.log Version-to-version change highlights. +Programmer and internal documentation: + libjpeg.txt How to use the JPEG library in your own programs. + example.c Sample code for calling the JPEG library. + structure.txt Overview of the JPEG library's internal structure. + filelist.txt Road map of IJG files. + coderules.txt Coding style rules --- please read if you contribute code. + +Please read at least the files install.txt and usage.txt. Some information +can also be found in the JPEG FAQ (Frequently Asked Questions) article. See +ARCHIVE LOCATIONS below to find out where to obtain the FAQ article. + +If you want to understand how the JPEG code works, we suggest reading one or +more of the REFERENCES, then looking at the documentation files (in roughly +the order listed) before diving into the code. + + +OVERVIEW +======== + +This package contains C software to implement JPEG image encoding, decoding, +and transcoding. JPEG (pronounced "jay-peg") is a standardized compression +method for full-color and gray-scale images. + +This software implements JPEG baseline, extended-sequential, and progressive +compression processes. Provision is made for supporting all variants of these +processes, although some uncommon parameter settings aren't implemented yet. +We have made no provision for supporting the hierarchical or lossless +processes defined in the standard. + +We provide a set of library routines for reading and writing JPEG image files, +plus two sample applications "cjpeg" and "djpeg", which use the library to +perform conversion between JPEG and some other popular image file formats. +The library is intended to be reused in other applications. + +In order to support file conversion and viewing software, we have included +considerable functionality beyond the bare JPEG coding/decoding capability; +for example, the color quantization modules are not strictly part of JPEG +decoding, but they are essential for output to colormapped file formats or +colormapped displays. These extra functions can be compiled out of the +library if not required for a particular application. + +We have also included "jpegtran", a utility for lossless transcoding between +different JPEG processes, and "rdjpgcom" and "wrjpgcom", two simple +applications for inserting and extracting textual comments in JFIF files. + +The emphasis in designing this software has been on achieving portability and +flexibility, while also making it fast enough to be useful. In particular, +the software is not intended to be read as a tutorial on JPEG. (See the +REFERENCES section for introductory material.) Rather, it is intended to +be reliable, portable, industrial-strength code. We do not claim to have +achieved that goal in every aspect of the software, but we strive for it. + +We welcome the use of this software as a component of commercial products. +No royalty is required, but we do ask for an acknowledgement in product +documentation, as described under LEGAL ISSUES. + + +LEGAL ISSUES +============ + +In plain English: + +1. We don't promise that this software works. (But if you find any bugs, + please let us know!) +2. You can use this software for whatever you want. You don't have to pay us. +3. You may not pretend that you wrote this software. If you use it in a + program, you must acknowledge somewhere in your documentation that + you've used the IJG code. + +In legalese: + +The authors make NO WARRANTY or representation, either express or implied, +with respect to this software, its quality, accuracy, merchantability, or +fitness for a particular purpose. This software is provided "AS IS", and you, +its user, assume the entire risk as to its quality and accuracy. + +This software is copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding. +All Rights Reserved except as specified below. + +Permission is hereby granted to use, copy, modify, and distribute this +software (or portions thereof) for any purpose, without fee, subject to these +conditions: +(1) If any part of the source code for this software is distributed, then this +README file must be included, with this copyright and no-warranty notice +unaltered; and any additions, deletions, or changes to the original files +must be clearly indicated in accompanying documentation. +(2) If only executable code is distributed, then the accompanying +documentation must state that "this software is based in part on the work of +the Independent JPEG Group". +(3) Permission for use of this software is granted only if the user accepts +full responsibility for any undesirable consequences; the authors accept +NO LIABILITY for damages of any kind. + +These conditions apply to any software derived from or based on the IJG code, +not just to the unmodified library. If you use our work, you ought to +acknowledge us. + +Permission is NOT granted for the use of any IJG author's name or company name +in advertising or publicity relating to this software or products derived from +it. This software may be referred to only as "the Independent JPEG Group's +software". + +We specifically permit and encourage the use of this software as the basis of +commercial products, provided that all warranty or liability claims are +assumed by the product vendor. + + +ansi2knr.c is included in this distribution by permission of L. Peter Deutsch, +sole proprietor of its copyright holder, Aladdin Enterprises of Menlo Park, CA. +ansi2knr.c is NOT covered by the above copyright and conditions, but instead +by the usual distribution terms of the Free Software Foundation; principally, +that you must include source code if you redistribute it. (See the file +ansi2knr.c for full details.) However, since ansi2knr.c is not needed as part +of any program generated from the IJG code, this does not limit you more than +the foregoing paragraphs do. + +The Unix configuration script "configure" was produced with GNU Autoconf. +It is copyright by the Free Software Foundation but is freely distributable. +The same holds for its supporting scripts (config.guess, config.sub, +ltmain.sh). Another support script, install-sh, is copyright by X Consortium +but is also freely distributable. + +The IJG distribution formerly included code to read and write GIF files. +To avoid entanglement with the Unisys LZW patent, GIF reading support has +been removed altogether, and the GIF writer has been simplified to produce +"uncompressed GIFs". This technique does not use the LZW algorithm; the +resulting GIF files are larger than usual, but are readable by all standard +GIF decoders. + +We are required to state that + "The Graphics Interchange Format(c) is the Copyright property of + CompuServe Incorporated. GIF(sm) is a Service Mark property of + CompuServe Incorporated." + + +REFERENCES +========== + +We recommend reading one or more of these references before trying to +understand the innards of the JPEG software. + +The best short technical introduction to the JPEG compression algorithm is + Wallace, Gregory K. "The JPEG Still Picture Compression Standard", + Communications of the ACM, April 1991 (vol. 34 no. 4), pp. 30-44. +(Adjacent articles in that issue discuss MPEG motion picture compression, +applications of JPEG, and related topics.) If you don't have the CACM issue +handy, a PostScript file containing a revised version of Wallace's article is +available at http://www.ijg.org/files/wallace.ps.gz. The file (actually +a preprint for an article that appeared in IEEE Trans. Consumer Electronics) +omits the sample images that appeared in CACM, but it includes corrections +and some added material. Note: the Wallace article is copyright ACM and IEEE, +and it may not be used for commercial purposes. + +A somewhat less technical, more leisurely introduction to JPEG can be found in +"The Data Compression Book" by Mark Nelson and Jean-loup Gailly, published by +M&T Books (New York), 2nd ed. 1996, ISBN 1-55851-434-1. This book provides +good explanations and example C code for a multitude of compression methods +including JPEG. It is an excellent source if you are comfortable reading C +code but don't know much about data compression in general. The book's JPEG +sample code is far from industrial-strength, but when you are ready to look +at a full implementation, you've got one here... + +The best currently available description of JPEG is the textbook "JPEG Still +Image Data Compression Standard" by William B. Pennebaker and Joan L. +Mitchell, published by Van Nostrand Reinhold, 1993, ISBN 0-442-01272-1. +Price US$59.95, 638 pp. The book includes the complete text of the ISO JPEG +standards (DIS 10918-1 and draft DIS 10918-2). +Although this is by far the most detailed and comprehensive exposition of +JPEG publicly available, we point out that it is still missing an explanation +of the most essential properties and algorithms of the underlying DCT +technology. +If you think that you know about DCT-based JPEG after reading this book, +then you are in delusion. The real fundamentals and corresponding potential +of DCT-based JPEG are not publicly known so far, and that is the reason for +all the mistaken developments taking place in the image coding domain. + +The original JPEG standard is divided into two parts, Part 1 being the actual +specification, while Part 2 covers compliance testing methods. Part 1 is +titled "Digital Compression and Coding of Continuous-tone Still Images, +Part 1: Requirements and guidelines" and has document numbers ISO/IEC IS +10918-1, ITU-T T.81. Part 2 is titled "Digital Compression and Coding of +Continuous-tone Still Images, Part 2: Compliance testing" and has document +numbers ISO/IEC IS 10918-2, ITU-T T.83. +IJG JPEG 8 introduces an implementation of the JPEG SmartScale extension +which is specified in a contributed document at ITU and ISO with title "ITU-T +JPEG-Plus Proposal for Extending ITU-T T.81 for Advanced Image Coding", April +2006, Geneva, Switzerland. The latest version of the document is Revision 3. + +The JPEG standard does not specify all details of an interchangeable file +format. For the omitted details we follow the "JFIF" conventions, revision +1.02. JFIF 1.02 has been adopted as an Ecma International Technical Report +and thus received a formal publication status. It is available as a free +download in PDF format from +http://www.ecma-international.org/publications/techreports/E-TR-098.htm. +A PostScript version of the JFIF document is available at +http://www.ijg.org/files/jfif.ps.gz. There is also a plain text version at +http://www.ijg.org/files/jfif.txt.gz, but it is missing the figures. + +The TIFF 6.0 file format specification can be obtained by FTP from +ftp://ftp.sgi.com/graphics/tiff/TIFF6.ps.gz. The JPEG incorporation scheme +found in the TIFF 6.0 spec of 3-June-92 has a number of serious problems. +IJG does not recommend use of the TIFF 6.0 design (TIFF Compression tag 6). +Instead, we recommend the JPEG design proposed by TIFF Technical Note #2 +(Compression tag 7). Copies of this Note can be obtained from +http://www.ijg.org/files/. It is expected that the next revision +of the TIFF spec will replace the 6.0 JPEG design with the Note's design. +Although IJG's own code does not support TIFF/JPEG, the free libtiff library +uses our library to implement TIFF/JPEG per the Note. + + +ARCHIVE LOCATIONS +================= + +The "official" archive site for this software is www.ijg.org. +The most recent released version can always be found there in +directory "files". This particular version will be archived as +http://www.ijg.org/files/jpegsrc.v8.tar.gz, and in Windows-compatible +"zip" archive format as http://www.ijg.org/files/jpegsr8.zip. + +The JPEG FAQ (Frequently Asked Questions) article is a source of some +general information about JPEG. +It is available on the World Wide Web at http://www.faqs.org/faqs/jpeg-faq/ +and other news.answers archive sites, including the official news.answers +archive at rtfm.mit.edu: ftp://rtfm.mit.edu/pub/usenet/news.answers/jpeg-faq/. +If you don't have Web or FTP access, send e-mail to mail-server@rtfm.mit.edu +with body + send usenet/news.answers/jpeg-faq/part1 + send usenet/news.answers/jpeg-faq/part2 + + +ACKNOWLEDGMENTS +=============== + +Thank to Juergen Bruder for providing me with a copy of the common DCT +algorithm article, only to find out that I had come to the same result +in a more direct and comprehensible way with a more generative approach. + +Thank to Istvan Sebestyen and Joan L. Mitchell for inviting me to the +ITU JPEG (Study Group 16) meeting in Geneva, Switzerland. + +Thank to Thomas Wiegand and Gary Sullivan for inviting me to the +Joint Video Team (MPEG & ITU) meeting in Geneva, Switzerland. + +Thank to John Korejwa and Massimo Ballerini for inviting me to +fruitful consultations in Boston, MA and Milan, Italy. + +Thank to Hendrik Elstner, Roland Fassauer, Simone Zuck, Guenther +Maier-Gerber, and Walter Stoeber for corresponding business development. + +Thank to Nico Zschach and Dirk Stelling of the technical support team +at the Digital Images company in Halle for providing me with extra +equipment for configuration tests. + +Thank to Richard F. Lyon (then of Foveon Inc.) for fruitful +communication about JPEG configuration in Sigma Photo Pro software. + +Thank to Andrew Finkenstadt for hosting the ijg.org site. + +Last but not least special thank to Thomas G. Lane for the original +design and development of this singular software package. + + +FILE FORMAT WARS +================ + +The ISO JPEG standards committee actually promotes different formats like +"JPEG 2000" or "JPEG XR" which are incompatible with original DCT-based +JPEG and which are based on faulty technologies. IJG therefore does not +and will not support such momentary mistakes (see REFERENCES). +We have little or no sympathy for the promotion of these formats. Indeed, +one of the original reasons for developing this free software was to help +force convergence on common, interoperable format standards for JPEG files. +Don't use an incompatible file format! +(In any case, our decoder will remain capable of reading existing JPEG +image files indefinitely.) + + +TO DO +===== + +Version 8.0 is the first release of a new generation JPEG standard +to overcome the limitations of the original JPEG specification. +More features are being prepared for coming releases... + +Please send bug reports, offers of help, etc. to jpeg-info@uc.ag. diff --git a/src/3rdparty/libjpeg/ansi2knr.1 b/src/3rdparty/libjpeg/ansi2knr.1 new file mode 100644 index 0000000..f9ee5a6 --- /dev/null +++ b/src/3rdparty/libjpeg/ansi2knr.1 @@ -0,0 +1,36 @@ +.TH ANSI2KNR 1 "19 Jan 1996" +.SH NAME +ansi2knr \- convert ANSI C to Kernighan & Ritchie C +.SH SYNOPSIS +.I ansi2knr +[--varargs] input_file [output_file] +.SH DESCRIPTION +If no output_file is supplied, output goes to stdout. +.br +There are no error messages. +.sp +.I ansi2knr +recognizes function definitions by seeing a non-keyword identifier at the left +margin, followed by a left parenthesis, with a right parenthesis as the last +character on the line, and with a left brace as the first token on the +following line (ignoring possible intervening comments). It will recognize a +multi-line header provided that no intervening line ends with a left or right +brace or a semicolon. These algorithms ignore whitespace and comments, except +that the function name must be the first thing on the line. +.sp +The following constructs will confuse it: +.br + - Any other construct that starts at the left margin and follows the +above syntax (such as a macro or function call). +.br + - Some macros that tinker with the syntax of the function header. +.sp +The --varargs switch is obsolete, and is recognized only for +backwards compatibility. The present version of +.I ansi2knr +will always attempt to convert a ... argument to va_alist and va_dcl. +.SH AUTHOR +L. Peter Deutsch wrote the original ansi2knr and +continues to maintain the current version; most of the code in the current +version is his work. ansi2knr also includes contributions by Francois +Pinard and Jim Avera . diff --git a/src/3rdparty/libjpeg/ansi2knr.c b/src/3rdparty/libjpeg/ansi2knr.c new file mode 100644 index 0000000..e84c210 --- /dev/null +++ b/src/3rdparty/libjpeg/ansi2knr.c @@ -0,0 +1,739 @@ +/* Copyright (C) 1989, 2000 Aladdin Enterprises. All rights reserved. */ + +/*$Id: ansi2knr.c,v 1.14 2003/09/06 05:36:56 eggert Exp $*/ +/* Convert ANSI C function definitions to K&R ("traditional C") syntax */ + +/* +ansi2knr is distributed in the hope that it will be useful, but WITHOUT ANY +WARRANTY. No author or distributor accepts responsibility to anyone for the +consequences of using it or for whether it serves any particular purpose or +works at all, unless he says so in writing. Refer to the GNU General Public +License (the "GPL") for full details. + +Everyone is granted permission to copy, modify and redistribute ansi2knr, +but only under the conditions described in the GPL. A copy of this license +is supposed to have been given to you along with ansi2knr so you can know +your rights and responsibilities. It should be in a file named COPYLEFT, +or, if there is no file named COPYLEFT, a file named COPYING. Among other +things, the copyright notice and this notice must be preserved on all +copies. + +We explicitly state here what we believe is already implied by the GPL: if +the ansi2knr program is distributed as a separate set of sources and a +separate executable file which are aggregated on a storage medium together +with another program, this in itself does not bring the other program under +the GPL, nor does the mere fact that such a program or the procedures for +constructing it invoke the ansi2knr executable bring any other part of the +program under the GPL. +*/ + +/* + * Usage: + ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]] + * --filename provides the file name for the #line directive in the output, + * overriding input_file (if present). + * If no input_file is supplied, input is read from stdin. + * If no output_file is supplied, output goes to stdout. + * There are no error messages. + * + * ansi2knr recognizes function definitions by seeing a non-keyword + * identifier at the left margin, followed by a left parenthesis, with a + * right parenthesis as the last character on the line, and with a left + * brace as the first token on the following line (ignoring possible + * intervening comments and/or preprocessor directives), except that a line + * consisting of only + * identifier1(identifier2) + * will not be considered a function definition unless identifier2 is + * the word "void", and a line consisting of + * identifier1(identifier2, <>) + * will not be considered a function definition. + * ansi2knr will recognize a multi-line header provided that no intervening + * line ends with a left or right brace or a semicolon. These algorithms + * ignore whitespace, comments, and preprocessor directives, except that + * the function name must be the first thing on the line. The following + * constructs will confuse it: + * - Any other construct that starts at the left margin and + * follows the above syntax (such as a macro or function call). + * - Some macros that tinker with the syntax of function headers. + */ + +/* + * The original and principal author of ansi2knr is L. Peter Deutsch + * . Other authors are noted in the change history + * that follows (in reverse chronological order): + + lpd 2000-04-12 backs out Eggert's changes because of bugs: + - concatlits didn't declare the type of its bufend argument; + - concatlits didn't recognize when it was inside a comment; + - scanstring could scan backward past the beginning of the string; when + - the check for \ + newline in scanstring was unnecessary. + + 2000-03-05 Paul Eggert + + Add support for concatenated string literals. + * ansi2knr.c (concatlits): New decl. + (main): Invoke concatlits to concatenate string literals. + (scanstring): Handle backslash-newline correctly. Work with + character constants. Fix bug when scanning backwards through + backslash-quote. Check for unterminated strings. + (convert1): Parse character constants, too. + (appendline, concatlits): New functions. + * ansi2knr.1: Document this. + + lpd 1999-08-17 added code to allow preprocessor directives + wherever comments are allowed + lpd 1999-04-12 added minor fixes from Pavel Roskin + for clean compilation with + gcc -W -Wall + lpd 1999-03-22 added hack to recognize lines consisting of + identifier1(identifier2, xxx) as *not* being procedures + lpd 1999-02-03 made indentation of preprocessor commands consistent + lpd 1999-01-28 fixed two bugs: a '/' in an argument list caused an + endless loop; quoted strings within an argument list + confused the parser + lpd 1999-01-24 added a check for write errors on the output, + suggested by Jim Meyering + lpd 1998-11-09 added further hack to recognize identifier(void) + as being a procedure + lpd 1998-10-23 added hack to recognize lines consisting of + identifier1(identifier2) as *not* being procedures + lpd 1997-12-08 made input_file optional; only closes input and/or + output file if not stdin or stdout respectively; prints + usage message on stderr rather than stdout; adds + --filename switch (changes suggested by + ) + lpd 1996-01-21 added code to cope with not HAVE_CONFIG_H and with + compilers that don't understand void, as suggested by + Tom Lane + lpd 1996-01-15 changed to require that the first non-comment token + on the line following a function header be a left brace, + to reduce sensitivity to macros, as suggested by Tom Lane + + lpd 1995-06-22 removed #ifndefs whose sole purpose was to define + undefined preprocessor symbols as 0; changed all #ifdefs + for configuration symbols to #ifs + lpd 1995-04-05 changed copyright notice to make it clear that + including ansi2knr in a program does not bring the entire + program under the GPL + lpd 1994-12-18 added conditionals for systems where ctype macros + don't handle 8-bit characters properly, suggested by + Francois Pinard ; + removed --varargs switch (this is now the default) + lpd 1994-10-10 removed CONFIG_BROKETS conditional + lpd 1994-07-16 added some conditionals to help GNU `configure', + suggested by Francois Pinard ; + properly erase prototype args in function parameters, + contributed by Jim Avera ; + correct error in writeblanks (it shouldn't erase EOLs) + lpd 1989-xx-xx original version + */ + +/* Most of the conditionals here are to make ansi2knr work with */ +/* or without the GNU configure machinery. */ + +#if HAVE_CONFIG_H +# include +#endif + +#include +#include + +#if HAVE_CONFIG_H + +/* + For properly autoconfiguring ansi2knr, use AC_CONFIG_HEADER(config.h). + This will define HAVE_CONFIG_H and so, activate the following lines. + */ + +# if STDC_HEADERS || HAVE_STRING_H +# include +# else +# include +# endif + +#else /* not HAVE_CONFIG_H */ + +/* Otherwise do it the hard way */ + +# ifdef BSD +# include +# else +# ifdef VMS + extern int strlen(), strncmp(); +# else +# include +# endif +# endif + +#endif /* not HAVE_CONFIG_H */ + +#if STDC_HEADERS +# include +#else +/* + malloc and free should be declared in stdlib.h, + but if you've got a K&R compiler, they probably aren't. + */ +# ifdef MSDOS +# include +# else +# ifdef VMS + extern char *malloc(); + extern void free(); +# else + extern char *malloc(); + extern int free(); +# endif +# endif + +#endif + +/* Define NULL (for *very* old compilers). */ +#ifndef NULL +# define NULL (0) +#endif + +/* + * The ctype macros don't always handle 8-bit characters correctly. + * Compensate for this here. + */ +#ifdef isascii +# undef HAVE_ISASCII /* just in case */ +# define HAVE_ISASCII 1 +#else +#endif +#if STDC_HEADERS || !HAVE_ISASCII +# define is_ascii(c) 1 +#else +# define is_ascii(c) isascii(c) +#endif + +#define is_space(c) (is_ascii(c) && isspace(c)) +#define is_alpha(c) (is_ascii(c) && isalpha(c)) +#define is_alnum(c) (is_ascii(c) && isalnum(c)) + +/* Scanning macros */ +#define isidchar(ch) (is_alnum(ch) || (ch) == '_') +#define isidfirstchar(ch) (is_alpha(ch) || (ch) == '_') + +/* Forward references */ +char *ppdirforward(); +char *ppdirbackward(); +char *skipspace(); +char *scanstring(); +int writeblanks(); +int test1(); +int convert1(); + +/* The main program */ +int +main(argc, argv) + int argc; + char *argv[]; +{ FILE *in = stdin; + FILE *out = stdout; + char *filename = 0; + char *program_name = argv[0]; + char *output_name = 0; +#define bufsize 5000 /* arbitrary size */ + char *buf; + char *line; + char *more; + char *usage = + "Usage: ansi2knr [--filename FILENAME] [INPUT_FILE [OUTPUT_FILE]]\n"; + /* + * In previous versions, ansi2knr recognized a --varargs switch. + * If this switch was supplied, ansi2knr would attempt to convert + * a ... argument to va_alist and va_dcl; if this switch was not + * supplied, ansi2knr would simply drop any such arguments. + * Now, ansi2knr always does this conversion, and we only + * check for this switch for backward compatibility. + */ + int convert_varargs = 1; + int output_error; + + while ( argc > 1 && argv[1][0] == '-' ) { + if ( !strcmp(argv[1], "--varargs") ) { + convert_varargs = 1; + argc--; + argv++; + continue; + } + if ( !strcmp(argv[1], "--filename") && argc > 2 ) { + filename = argv[2]; + argc -= 2; + argv += 2; + continue; + } + fprintf(stderr, "%s: Unrecognized switch: %s\n", program_name, + argv[1]); + fprintf(stderr, usage); + exit(1); + } + switch ( argc ) + { + default: + fprintf(stderr, usage); + exit(0); + case 3: + output_name = argv[2]; + out = fopen(output_name, "w"); + if ( out == NULL ) { + fprintf(stderr, "%s: Cannot open output file %s\n", + program_name, output_name); + exit(1); + } + /* falls through */ + case 2: + in = fopen(argv[1], "r"); + if ( in == NULL ) { + fprintf(stderr, "%s: Cannot open input file %s\n", + program_name, argv[1]); + exit(1); + } + if ( filename == 0 ) + filename = argv[1]; + /* falls through */ + case 1: + break; + } + if ( filename ) + fprintf(out, "#line 1 \"%s\"\n", filename); + buf = malloc(bufsize); + if ( buf == NULL ) + { + fprintf(stderr, "Unable to allocate read buffer!\n"); + exit(1); + } + line = buf; + while ( fgets(line, (unsigned)(buf + bufsize - line), in) != NULL ) + { +test: line += strlen(line); + switch ( test1(buf) ) + { + case 2: /* a function header */ + convert1(buf, out, 1, convert_varargs); + break; + case 1: /* a function */ + /* Check for a { at the start of the next line. */ + more = ++line; +f: if ( line >= buf + (bufsize - 1) ) /* overflow check */ + goto wl; + if ( fgets(line, (unsigned)(buf + bufsize - line), in) == NULL ) + goto wl; + switch ( *skipspace(ppdirforward(more), 1) ) + { + case '{': + /* Definitely a function header. */ + convert1(buf, out, 0, convert_varargs); + fputs(more, out); + break; + case 0: + /* The next line was blank or a comment: */ + /* keep scanning for a non-comment. */ + line += strlen(line); + goto f; + default: + /* buf isn't a function header, but */ + /* more might be. */ + fputs(buf, out); + strcpy(buf, more); + line = buf; + goto test; + } + break; + case -1: /* maybe the start of a function */ + if ( line != buf + (bufsize - 1) ) /* overflow check */ + continue; + /* falls through */ + default: /* not a function */ +wl: fputs(buf, out); + break; + } + line = buf; + } + if ( line != buf ) + fputs(buf, out); + free(buf); + if ( output_name ) { + output_error = ferror(out); + output_error |= fclose(out); + } else { /* out == stdout */ + fflush(out); + output_error = ferror(out); + } + if ( output_error ) { + fprintf(stderr, "%s: error writing to %s\n", program_name, + (output_name ? output_name : "stdout")); + exit(1); + } + if ( in != stdin ) + fclose(in); + return 0; +} + +/* + * Skip forward or backward over one or more preprocessor directives. + */ +char * +ppdirforward(p) + char *p; +{ + for (; *p == '#'; ++p) { + for (; *p != '\r' && *p != '\n'; ++p) + if (*p == 0) + return p; + if (*p == '\r' && p[1] == '\n') + ++p; + } + return p; +} +char * +ppdirbackward(p, limit) + char *p; + char *limit; +{ + char *np = p; + + for (;; p = --np) { + if (*np == '\n' && np[-1] == '\r') + --np; + for (; np > limit && np[-1] != '\r' && np[-1] != '\n'; --np) + if (np[-1] == 0) + return np; + if (*np != '#') + return p; + } +} + +/* + * Skip over whitespace, comments, and preprocessor directives, + * in either direction. + */ +char * +skipspace(p, dir) + char *p; + int dir; /* 1 for forward, -1 for backward */ +{ + for ( ; ; ) { + while ( is_space(*p) ) + p += dir; + if ( !(*p == '/' && p[dir] == '*') ) + break; + p += dir; p += dir; + while ( !(*p == '*' && p[dir] == '/') ) { + if ( *p == 0 ) + return p; /* multi-line comment?? */ + p += dir; + } + p += dir; p += dir; + } + return p; +} + +/* Scan over a quoted string, in either direction. */ +char * +scanstring(p, dir) + char *p; + int dir; +{ + for (p += dir; ; p += dir) + if (*p == '"' && p[-dir] != '\\') + return p + dir; +} + +/* + * Write blanks over part of a string. + * Don't overwrite end-of-line characters. + */ +int +writeblanks(start, end) + char *start; + char *end; +{ char *p; + for ( p = start; p < end; p++ ) + if ( *p != '\r' && *p != '\n' ) + *p = ' '; + return 0; +} + +/* + * Test whether the string in buf is a function definition. + * The string may contain and/or end with a newline. + * Return as follows: + * 0 - definitely not a function definition; + * 1 - definitely a function definition; + * 2 - definitely a function prototype (NOT USED); + * -1 - may be the beginning of a function definition, + * append another line and look again. + * The reason we don't attempt to convert function prototypes is that + * Ghostscript's declaration-generating macros look too much like + * prototypes, and confuse the algorithms. + */ +int +test1(buf) + char *buf; +{ char *p = buf; + char *bend; + char *endfn; + int contin; + + if ( !isidfirstchar(*p) ) + return 0; /* no name at left margin */ + bend = skipspace(ppdirbackward(buf + strlen(buf) - 1, buf), -1); + switch ( *bend ) + { + case ';': contin = 0 /*2*/; break; + case ')': contin = 1; break; + case '{': return 0; /* not a function */ + case '}': return 0; /* not a function */ + default: contin = -1; + } + while ( isidchar(*p) ) + p++; + endfn = p; + p = skipspace(p, 1); + if ( *p++ != '(' ) + return 0; /* not a function */ + p = skipspace(p, 1); + if ( *p == ')' ) + return 0; /* no parameters */ + /* Check that the apparent function name isn't a keyword. */ + /* We only need to check for keywords that could be followed */ + /* by a left parenthesis (which, unfortunately, is most of them). */ + { static char *words[] = + { "asm", "auto", "case", "char", "const", "double", + "extern", "float", "for", "if", "int", "long", + "register", "return", "short", "signed", "sizeof", + "static", "switch", "typedef", "unsigned", + "void", "volatile", "while", 0 + }; + char **key = words; + char *kp; + unsigned len = endfn - buf; + + while ( (kp = *key) != 0 ) + { if ( strlen(kp) == len && !strncmp(kp, buf, len) ) + return 0; /* name is a keyword */ + key++; + } + } + { + char *id = p; + int len; + /* + * Check for identifier1(identifier2) and not + * identifier1(void), or identifier1(identifier2, xxxx). + */ + + while ( isidchar(*p) ) + p++; + len = p - id; + p = skipspace(p, 1); + if (*p == ',' || + (*p == ')' && (len != 4 || strncmp(id, "void", 4))) + ) + return 0; /* not a function */ + } + /* + * If the last significant character was a ), we need to count + * parentheses, because it might be part of a formal parameter + * that is a procedure. + */ + if (contin > 0) { + int level = 0; + + for (p = skipspace(buf, 1); *p; p = skipspace(p + 1, 1)) + level += (*p == '(' ? 1 : *p == ')' ? -1 : 0); + if (level > 0) + contin = -1; + } + return contin; +} + +/* Convert a recognized function definition or header to K&R syntax. */ +int +convert1(buf, out, header, convert_varargs) + char *buf; + FILE *out; + int header; /* Boolean */ + int convert_varargs; /* Boolean */ +{ char *endfn; + char *p; + /* + * The breaks table contains pointers to the beginning and end + * of each argument. + */ + char **breaks; + unsigned num_breaks = 2; /* for testing */ + char **btop; + char **bp; + char **ap; + char *vararg = 0; + + /* Pre-ANSI implementations don't agree on whether strchr */ + /* is called strchr or index, so we open-code it here. */ + for ( endfn = buf; *(endfn++) != '('; ) + ; +top: p = endfn; + breaks = (char **)malloc(sizeof(char *) * num_breaks * 2); + if ( breaks == NULL ) + { /* Couldn't allocate break table, give up */ + fprintf(stderr, "Unable to allocate break table!\n"); + fputs(buf, out); + return -1; + } + btop = breaks + num_breaks * 2 - 2; + bp = breaks; + /* Parse the argument list */ + do + { int level = 0; + char *lp = NULL; + char *rp = NULL; + char *end = NULL; + + if ( bp >= btop ) + { /* Filled up break table. */ + /* Allocate a bigger one and start over. */ + free((char *)breaks); + num_breaks <<= 1; + goto top; + } + *bp++ = p; + /* Find the end of the argument */ + for ( ; end == NULL; p++ ) + { switch(*p) + { + case ',': + if ( !level ) end = p; + break; + case '(': + if ( !level ) lp = p; + level++; + break; + case ')': + if ( --level < 0 ) end = p; + else rp = p; + break; + case '/': + if (p[1] == '*') + p = skipspace(p, 1) - 1; + break; + case '"': + p = scanstring(p, 1) - 1; + break; + default: + ; + } + } + /* Erase any embedded prototype parameters. */ + if ( lp && rp ) + writeblanks(lp + 1, rp); + p--; /* back up over terminator */ + /* Find the name being declared. */ + /* This is complicated because of procedure and */ + /* array modifiers. */ + for ( ; ; ) + { p = skipspace(p - 1, -1); + switch ( *p ) + { + case ']': /* skip array dimension(s) */ + case ')': /* skip procedure args OR name */ + { int level = 1; + while ( level ) + switch ( *--p ) + { + case ']': case ')': + level++; + break; + case '[': case '(': + level--; + break; + case '/': + if (p > buf && p[-1] == '*') + p = skipspace(p, -1) + 1; + break; + case '"': + p = scanstring(p, -1) + 1; + break; + default: ; + } + } + if ( *p == '(' && *skipspace(p + 1, 1) == '*' ) + { /* We found the name being declared */ + while ( !isidfirstchar(*p) ) + p = skipspace(p, 1) + 1; + goto found; + } + break; + default: + goto found; + } + } +found: if ( *p == '.' && p[-1] == '.' && p[-2] == '.' ) + { if ( convert_varargs ) + { *bp++ = "va_alist"; + vararg = p-2; + } + else + { p++; + if ( bp == breaks + 1 ) /* sole argument */ + writeblanks(breaks[0], p); + else + writeblanks(bp[-1] - 1, p); + bp--; + } + } + else + { while ( isidchar(*p) ) p--; + *bp++ = p+1; + } + p = end; + } + while ( *p++ == ',' ); + *bp = p; + /* Make a special check for 'void' arglist */ + if ( bp == breaks+2 ) + { p = skipspace(breaks[0], 1); + if ( !strncmp(p, "void", 4) ) + { p = skipspace(p+4, 1); + if ( p == breaks[2] - 1 ) + { bp = breaks; /* yup, pretend arglist is empty */ + writeblanks(breaks[0], p + 1); + } + } + } + /* Put out the function name and left parenthesis. */ + p = buf; + while ( p != endfn ) putc(*p, out), p++; + /* Put out the declaration. */ + if ( header ) + { fputs(");", out); + for ( p = breaks[0]; *p; p++ ) + if ( *p == '\r' || *p == '\n' ) + putc(*p, out); + } + else + { for ( ap = breaks+1; ap < bp; ap += 2 ) + { p = *ap; + while ( isidchar(*p) ) + putc(*p, out), p++; + if ( ap < bp - 1 ) + fputs(", ", out); + } + fputs(") ", out); + /* Put out the argument declarations */ + for ( ap = breaks+2; ap <= bp; ap += 2 ) + (*ap)[-1] = ';'; + if ( vararg != 0 ) + { *vararg = 0; + fputs(breaks[0], out); /* any prior args */ + fputs("va_dcl", out); /* the final arg */ + fputs(bp[0], out); + } + else + fputs(breaks[0], out); + } + free((char *)breaks); + return 0; +} diff --git a/src/3rdparty/libjpeg/cderror.h b/src/3rdparty/libjpeg/cderror.h new file mode 100644 index 0000000..e19c475 --- /dev/null +++ b/src/3rdparty/libjpeg/cderror.h @@ -0,0 +1,134 @@ +/* + * cderror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the cjpeg/djpeg + * applications. These strings are not needed as part of the JPEG library + * proper. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef CDERROR_H +#define CDERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* CDERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_FIRSTADDONCODE=1000, NULL) /* Must be first entry! */ + +#ifdef BMP_SUPPORTED +JMESSAGE(JERR_BMP_BADCMAP, "Unsupported BMP colormap format") +JMESSAGE(JERR_BMP_BADDEPTH, "Only 8- and 24-bit BMP files are supported") +JMESSAGE(JERR_BMP_BADHEADER, "Invalid BMP file: bad header length") +JMESSAGE(JERR_BMP_BADPLANES, "Invalid BMP file: biPlanes not equal to 1") +JMESSAGE(JERR_BMP_COLORSPACE, "BMP output must be grayscale or RGB") +JMESSAGE(JERR_BMP_COMPRESSED, "Sorry, compressed BMPs not yet supported") +JMESSAGE(JERR_BMP_EMPTY, "Empty BMP image") +JMESSAGE(JERR_BMP_NOT, "Not a BMP file - does not start with BM") +JMESSAGE(JTRC_BMP, "%ux%u 24-bit BMP image") +JMESSAGE(JTRC_BMP_MAPPED, "%ux%u 8-bit colormapped BMP image") +JMESSAGE(JTRC_BMP_OS2, "%ux%u 24-bit OS2 BMP image") +JMESSAGE(JTRC_BMP_OS2_MAPPED, "%ux%u 8-bit colormapped OS2 BMP image") +#endif /* BMP_SUPPORTED */ + +#ifdef GIF_SUPPORTED +JMESSAGE(JERR_GIF_BUG, "GIF output got confused") +JMESSAGE(JERR_GIF_CODESIZE, "Bogus GIF codesize %d") +JMESSAGE(JERR_GIF_COLORSPACE, "GIF output must be grayscale or RGB") +JMESSAGE(JERR_GIF_IMAGENOTFOUND, "Too few images in GIF file") +JMESSAGE(JERR_GIF_NOT, "Not a GIF file") +JMESSAGE(JTRC_GIF, "%ux%ux%d GIF image") +JMESSAGE(JTRC_GIF_BADVERSION, + "Warning: unexpected GIF version number '%c%c%c'") +JMESSAGE(JTRC_GIF_EXTENSION, "Ignoring GIF extension block of type 0x%02x") +JMESSAGE(JTRC_GIF_NONSQUARE, "Caution: nonsquare pixels in input") +JMESSAGE(JWRN_GIF_BADDATA, "Corrupt data in GIF file") +JMESSAGE(JWRN_GIF_CHAR, "Bogus char 0x%02x in GIF file, ignoring") +JMESSAGE(JWRN_GIF_ENDCODE, "Premature end of GIF image") +JMESSAGE(JWRN_GIF_NOMOREDATA, "Ran out of GIF bits") +#endif /* GIF_SUPPORTED */ + +#ifdef PPM_SUPPORTED +JMESSAGE(JERR_PPM_COLORSPACE, "PPM output must be grayscale or RGB") +JMESSAGE(JERR_PPM_NONNUMERIC, "Nonnumeric data in PPM file") +JMESSAGE(JERR_PPM_NOT, "Not a PPM/PGM file") +JMESSAGE(JTRC_PGM, "%ux%u PGM image") +JMESSAGE(JTRC_PGM_TEXT, "%ux%u text PGM image") +JMESSAGE(JTRC_PPM, "%ux%u PPM image") +JMESSAGE(JTRC_PPM_TEXT, "%ux%u text PPM image") +#endif /* PPM_SUPPORTED */ + +#ifdef RLE_SUPPORTED +JMESSAGE(JERR_RLE_BADERROR, "Bogus error code from RLE library") +JMESSAGE(JERR_RLE_COLORSPACE, "RLE output must be grayscale or RGB") +JMESSAGE(JERR_RLE_DIMENSIONS, "Image dimensions (%ux%u) too large for RLE") +JMESSAGE(JERR_RLE_EMPTY, "Empty RLE file") +JMESSAGE(JERR_RLE_EOF, "Premature EOF in RLE header") +JMESSAGE(JERR_RLE_MEM, "Insufficient memory for RLE header") +JMESSAGE(JERR_RLE_NOT, "Not an RLE file") +JMESSAGE(JERR_RLE_TOOMANYCHANNELS, "Cannot handle %d output channels for RLE") +JMESSAGE(JERR_RLE_UNSUPPORTED, "Cannot handle this RLE setup") +JMESSAGE(JTRC_RLE, "%ux%u full-color RLE file") +JMESSAGE(JTRC_RLE_FULLMAP, "%ux%u full-color RLE file with map of length %d") +JMESSAGE(JTRC_RLE_GRAY, "%ux%u grayscale RLE file") +JMESSAGE(JTRC_RLE_MAPGRAY, "%ux%u grayscale RLE file with map of length %d") +JMESSAGE(JTRC_RLE_MAPPED, "%ux%u colormapped RLE file with map of length %d") +#endif /* RLE_SUPPORTED */ + +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_TGA_BADCMAP, "Unsupported Targa colormap format") +JMESSAGE(JERR_TGA_BADPARMS, "Invalid or unsupported Targa file") +JMESSAGE(JERR_TGA_COLORSPACE, "Targa output must be grayscale or RGB") +JMESSAGE(JTRC_TGA, "%ux%u RGB Targa image") +JMESSAGE(JTRC_TGA_GRAY, "%ux%u grayscale Targa image") +JMESSAGE(JTRC_TGA_MAPPED, "%ux%u colormapped Targa image") +#else +JMESSAGE(JERR_TGA_NOTCOMP, "Targa support was not compiled") +#endif /* TARGA_SUPPORTED */ + +JMESSAGE(JERR_BAD_CMAP_FILE, + "Color map file is invalid or of unsupported format") +JMESSAGE(JERR_TOO_MANY_COLORS, + "Output file format cannot handle %d colormap entries") +JMESSAGE(JERR_UNGETC_FAILED, "ungetc failed") +#ifdef TARGA_SUPPORTED +JMESSAGE(JERR_UNKNOWN_FORMAT, + "Unrecognized input file format --- perhaps you need -targa") +#else +JMESSAGE(JERR_UNKNOWN_FORMAT, "Unrecognized input file format") +#endif +JMESSAGE(JERR_UNSUPPORTED_FORMAT, "Unsupported output file format") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTADDONCODE +} ADDON_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE diff --git a/src/3rdparty/libjpeg/cdjpeg.h b/src/3rdparty/libjpeg/cdjpeg.h new file mode 100644 index 0000000..ed024ac --- /dev/null +++ b/src/3rdparty/libjpeg/cdjpeg.h @@ -0,0 +1,187 @@ +/* + * cdjpeg.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains common declarations for the sample applications + * cjpeg and djpeg. It is NOT used by the core JPEG library. + */ + +#define JPEG_CJPEG_DJPEG /* define proper options in jconfig.h */ +#define JPEG_INTERNAL_OPTIONS /* cjpeg.c,djpeg.c need to see xxx_SUPPORTED */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" /* get library error codes too */ +#include "cderror.h" /* get application-specific error codes */ + + +/* + * Object interface for cjpeg's source file decoding modules + */ + +typedef struct cjpeg_source_struct * cjpeg_source_ptr; + +struct cjpeg_source_struct { + JMETHOD(void, start_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(JDIMENSION, get_pixel_rows, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + JMETHOD(void, finish_input, (j_compress_ptr cinfo, + cjpeg_source_ptr sinfo)); + + FILE *input_file; + + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * Object interface for djpeg's output file encoding modules + */ + +typedef struct djpeg_dest_struct * djpeg_dest_ptr; + +struct djpeg_dest_struct { + /* start_output is called after jpeg_start_decompress finishes. + * The color map will be ready at this time, if one is needed. + */ + JMETHOD(void, start_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + /* Emit the specified number of pixel rows from the buffer. */ + JMETHOD(void, put_pixel_rows, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo, + JDIMENSION rows_supplied)); + /* Finish up at the end of the image. */ + JMETHOD(void, finish_output, (j_decompress_ptr cinfo, + djpeg_dest_ptr dinfo)); + + /* Target file spec; filled in by djpeg.c after object is created. */ + FILE * output_file; + + /* Output pixel-row buffer. Created by module init or start_output. + * Width is cinfo->output_width * cinfo->output_components; + * height is buffer_height. + */ + JSAMPARRAY buffer; + JDIMENSION buffer_height; +}; + + +/* + * cjpeg/djpeg may need to perform extra passes to convert to or from + * the source/destination file format. The JPEG library does not know + * about these passes, but we'd like them to be counted by the progress + * monitor. We use an expanded progress monitor object to hold the + * additional pass count. + */ + +struct cdjpeg_progress_mgr { + struct jpeg_progress_mgr pub; /* fields known to JPEG library */ + int completed_extra_passes; /* extra passes completed */ + int total_extra_passes; /* total extra */ + /* last printed percentage stored here to avoid multiple printouts */ + int percent_done; +}; + +typedef struct cdjpeg_progress_mgr * cd_progress_ptr; + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_read_bmp jIRdBMP +#define jinit_write_bmp jIWrBMP +#define jinit_read_gif jIRdGIF +#define jinit_write_gif jIWrGIF +#define jinit_read_ppm jIRdPPM +#define jinit_write_ppm jIWrPPM +#define jinit_read_rle jIRdRLE +#define jinit_write_rle jIWrRLE +#define jinit_read_targa jIRdTarga +#define jinit_write_targa jIWrTarga +#define read_quant_tables RdQTables +#define read_scan_script RdScnScript +#define set_quality_ratings SetQRates +#define set_quant_slots SetQSlots +#define set_sample_factors SetSFacts +#define read_color_map RdCMap +#define enable_signal_catcher EnSigCatcher +#define start_progress_monitor StProgMon +#define end_progress_monitor EnProgMon +#define read_stdin RdStdin +#define write_stdout WrStdout +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Module selection routines for I/O modules. */ + +EXTERN(cjpeg_source_ptr) jinit_read_bmp JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_bmp JPP((j_decompress_ptr cinfo, + boolean is_os2)); +EXTERN(cjpeg_source_ptr) jinit_read_gif JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_gif JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_ppm JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_ppm JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_rle JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_rle JPP((j_decompress_ptr cinfo)); +EXTERN(cjpeg_source_ptr) jinit_read_targa JPP((j_compress_ptr cinfo)); +EXTERN(djpeg_dest_ptr) jinit_write_targa JPP((j_decompress_ptr cinfo)); + +/* cjpeg support routines (in rdswitch.c) */ + +EXTERN(boolean) read_quant_tables JPP((j_compress_ptr cinfo, char * filename, + boolean force_baseline)); +EXTERN(boolean) read_scan_script JPP((j_compress_ptr cinfo, char * filename)); +EXTERN(boolean) set_quality_ratings JPP((j_compress_ptr cinfo, char *arg, + boolean force_baseline)); +EXTERN(boolean) set_quant_slots JPP((j_compress_ptr cinfo, char *arg)); +EXTERN(boolean) set_sample_factors JPP((j_compress_ptr cinfo, char *arg)); + +/* djpeg support routines (in rdcolmap.c) */ + +EXTERN(void) read_color_map JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* common support routines (in cdjpeg.c) */ + +EXTERN(void) enable_signal_catcher JPP((j_common_ptr cinfo)); +EXTERN(void) start_progress_monitor JPP((j_common_ptr cinfo, + cd_progress_ptr progress)); +EXTERN(void) end_progress_monitor JPP((j_common_ptr cinfo)); +EXTERN(boolean) keymatch JPP((char * arg, const char * keyword, int minchars)); +EXTERN(FILE *) read_stdin JPP((void)); +EXTERN(FILE *) write_stdout JPP((void)); + +/* miscellaneous useful macros */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define WRITE_BINARY "w" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define WRITE_BINARY "wb", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define WRITE_BINARY "wb" +#endif +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif +#ifndef EXIT_SUCCESS +#ifdef VMS +#define EXIT_SUCCESS 1 /* VMS is very nonstandard */ +#else +#define EXIT_SUCCESS 0 +#endif +#endif +#ifndef EXIT_WARNING +#ifdef VMS +#define EXIT_WARNING 1 /* VMS is very nonstandard */ +#else +#define EXIT_WARNING 2 +#endif +#endif diff --git a/src/3rdparty/libjpeg/change.log b/src/3rdparty/libjpeg/change.log new file mode 100644 index 0000000..58ea3eb --- /dev/null +++ b/src/3rdparty/libjpeg/change.log @@ -0,0 +1,290 @@ +CHANGE LOG for Independent JPEG Group's JPEG software + + +Version 8 10-Jan-2010 +---------------------- + +jpegtran now supports the same -scale option as djpeg for "lossless" resize. +An implementation of the JPEG SmartScale extension is required for this +feature. A (draft) specification of the JPEG SmartScale extension is +available as a contributed document at ITU and ISO. Revision 2 or later +of the document is required (latest document version is Revision 3). +The SmartScale extension will enable more features beside lossless resize +in future implementations, as described in the document (new compression +options). + +Add sanity check in BMP reader module to avoid cjpeg crash for empty input +image (thank to Isaev Ildar of ISP RAS, Moscow, RU for reporting this error). + +Add data source and destination managers for read from and write to +memory buffers. New API functions jpeg_mem_src and jpeg_mem_dest. +Thank to Roberto Boni from Italy for the suggestion. + + +Version 7 27-Jun-2009 +---------------------- + +New scaled DCTs implemented. +djpeg now supports scalings N/8 with all N from 1 to 16. +cjpeg now supports scalings 8/N with all N from 1 to 16. +Scaled DCTs with size larger than 8 are now also used for resolving the +common 2x2 chroma subsampling case without additional spatial resampling. +Separate spatial resampling for those kind of files is now only necessary +for N>8 scaling cases. +Furthermore, separate scaled DCT functions are provided for direct resolving +of the common asymmetric subsampling cases (2x1 and 1x2) without additional +spatial resampling. + +cjpeg -quality option has been extended for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). +New API function jpeg_default_qtables() and q_scale_factor array in library. + +Added -nosmooth option to cjpeg, complementary to djpeg. +New variable "do_fancy_downsampling" in library, complement to fancy +upsampling. Fancy upsampling now uses direct DCT scaling with sizes +larger than 8. The old method is not reversible and has been removed. + +Support arithmetic entropy encoding and decoding. +Added files jaricom.c, jcarith.c, jdarith.c. + +Straighten the file structure: +Removed files jidctred.c, jcphuff.c, jchuff.h, jdphuff.c, jdhuff.h. + +jpegtran has a new "lossless" cropping feature. + +Implement -perfect option in jpegtran, new API function +jtransform_perfect_transform() in transupp. (DP 204_perfect.dpatch) + +Better error messages for jpegtran fopen failure. +(DP 203_jpegtran_errmsg.dpatch) + +Fix byte order issue with 16bit PPM/PGM files in rdppm.c/wrppm.c: +according to Netpbm, the de facto standard implementation of the PNM formats, +the most significant byte is first. (DP 203_rdppm.dpatch) + +Add -raw option to rdjpgcom not to mangle the output. +(DP 205_rdjpgcom_raw.dpatch) + +Make rdjpgcom locale aware. (DP 201_rdjpgcom_locale.dpatch) + +Add extern "C" to jpeglib.h. +This avoids the need to put extern "C" { ... } around #include "jpeglib.h" +in your C++ application. Defining the symbol DONT_USE_EXTERN_C in the +configuration prevents this. (DP 202_jpeglib.h_c++.dpatch) + + +Version 6b 27-Mar-1998 +----------------------- + +jpegtran has new features for lossless image transformations (rotation +and flipping) as well as "lossless" reduction to grayscale. + +jpegtran now copies comments by default; it has a -copy switch to enable +copying all APPn blocks as well, or to suppress comments. (Formerly it +always suppressed comments and APPn blocks.) jpegtran now also preserves +JFIF version and resolution information. + +New decompressor library feature: COM and APPn markers found in the input +file can be saved in memory for later use by the application. (Before, +you had to code this up yourself with a custom marker processor.) + +There is an unused field "void * client_data" now in compress and decompress +parameter structs; this may be useful in some applications. + +JFIF version number information is now saved by the decoder and accepted by +the encoder. jpegtran uses this to copy the source file's version number, +to ensure "jpegtran -copy all" won't create bogus files that contain JFXX +extensions but claim to be version 1.01. Applications that generate their +own JFXX extension markers also (finally) have a supported way to cause the +encoder to emit JFIF version number 1.02. + +djpeg's trace mode reports JFIF 1.02 thumbnail images as such, rather +than as unknown APP0 markers. + +In -verbose mode, djpeg and rdjpgcom will try to print the contents of +APP12 markers as text. Some digital cameras store useful text information +in APP12 markers. + +Handling of truncated data streams is more robust: blocks beyond the one in +which the error occurs will be output as uniform gray, or left unchanged +if decoding a progressive JPEG. The appearance no longer depends on the +Huffman tables being used. + +Huffman tables are checked for validity much more carefully than before. + +To avoid the Unisys LZW patent, djpeg's GIF output capability has been +changed to produce "uncompressed GIFs", and cjpeg's GIF input capability +has been removed altogether. We're not happy about it either, but there +seems to be no good alternative. + +The configure script now supports building libjpeg as a shared library +on many flavors of Unix (all the ones that GNU libtool knows how to +build shared libraries for). Use "./configure --enable-shared" to +try this out. + +New jconfig file and makefiles for Microsoft Visual C++ and Developer Studio. +Also, a jconfig file and a build script for Metrowerks CodeWarrior +on Apple Macintosh. makefile.dj has been updated for DJGPP v2, and there +are miscellaneous other minor improvements in the makefiles. + +jmemmac.c now knows how to create temporary files following Mac System 7 +conventions. + +djpeg's -map switch is now able to read raw-format PPM files reliably. + +cjpeg -progressive -restart no longer generates any unnecessary DRI markers. + +Multiple calls to jpeg_simple_progression for a single JPEG object +no longer leak memory. + + +Version 6a 7-Feb-96 +-------------------- + +Library initialization sequence modified to detect version mismatches +and struct field packing mismatches between library and calling application. +This change requires applications to be recompiled, but does not require +any application source code change. + +All routine declarations changed to the style "GLOBAL(type) name ...", +that is, GLOBAL, LOCAL, METHODDEF, EXTERN are now macros taking the +routine's return type as an argument. This makes it possible to add +Microsoft-style linkage keywords to all the routines by changing just +these macros. Note that any application code that was using these macros +will have to be changed. + +DCT coefficient quantization tables are now stored in normal array order +rather than zigzag order. Application code that calls jpeg_add_quant_table, +or otherwise manipulates quantization tables directly, will need to be +changed. If you need to make such code work with either older or newer +versions of the library, a test like "#if JPEG_LIB_VERSION >= 61" is +recommended. + +djpeg's trace capability now dumps DQT tables in natural order, not zigzag +order. This allows the trace output to be made into a "-qtables" file +more easily. + +New system-dependent memory manager module for use on Apple Macintosh. + +Fix bug in cjpeg's -smooth option: last one or two scanlines would be +duplicates of the prior line unless the image height mod 16 was 1 or 2. + +Repair minor problems in VMS, BCC, MC6 makefiles. + +New configure script based on latest GNU Autoconf. + +Correct the list of include files needed by MetroWerks C for ccommand(). + +Numerous small documentation updates. + + +Version 6 2-Aug-95 +------------------- + +Progressive JPEG support: library can read and write full progressive JPEG +files. A "buffered image" mode supports incremental decoding for on-the-fly +display of progressive images. Simply recompiling an existing IJG-v5-based +decoder with v6 should allow it to read progressive files, though of course +without any special progressive display. + +New "jpegtran" application performs lossless transcoding between different +JPEG formats; primarily, it can be used to convert baseline to progressive +JPEG and vice versa. In support of jpegtran, the library now allows lossless +reading and writing of JPEG files as DCT coefficient arrays. This ability +may be of use in other applications. + +Notes for programmers: +* We changed jpeg_start_decompress() to be able to suspend; this makes all +decoding modes available to suspending-input applications. However, +existing applications that use suspending input will need to be changed +to check the return value from jpeg_start_decompress(). You don't need to +do anything if you don't use a suspending data source. +* We changed the interface to the virtual array routines: access_virt_array +routines now take a count of the number of rows to access this time. The +last parameter to request_virt_array routines is now interpreted as the +maximum number of rows that may be accessed at once, but not necessarily +the height of every access. + + +Version 5b 15-Mar-95 +--------------------- + +Correct bugs with grayscale images having v_samp_factor > 1. + +jpeg_write_raw_data() now supports output suspension. + +Correct bugs in "configure" script for case of compiling in +a directory other than the one containing the source files. + +Repair bug in jquant1.c: sometimes didn't use as many colors as it could. + +Borland C makefile and jconfig file work under either MS-DOS or OS/2. + +Miscellaneous improvements to documentation. + + +Version 5a 7-Dec-94 +-------------------- + +Changed color conversion roundoff behavior so that grayscale values are +represented exactly. (This causes test image files to change.) + +Make ordered dither use 16x16 instead of 4x4 pattern for a small quality +improvement. + +New configure script based on latest GNU Autoconf. +Fix configure script to handle CFLAGS correctly. +Rename *.auto files to *.cfg, so that configure script still works if +file names have been truncated for DOS. + +Fix bug in rdbmp.c: didn't allow for extra data between header and image. + +Modify rdppm.c/wrppm.c to handle 2-byte raw PPM/PGM formats for 12-bit data. + +Fix several bugs in rdrle.c. + +NEED_SHORT_EXTERNAL_NAMES option was broken. + +Revise jerror.h/jerror.c for more flexibility in message table. + +Repair oversight in jmemname.c NO_MKTEMP case: file could be there +but unreadable. + + +Version 5 24-Sep-94 +-------------------- + +Version 5 represents a nearly complete redesign and rewrite of the IJG +software. Major user-visible changes include: + * Automatic configuration simplifies installation for most Unix systems. + * A range of speed vs. image quality tradeoffs are supported. + This includes resizing of an image during decompression: scaling down + by a factor of 1/2, 1/4, or 1/8 is handled very efficiently. + * New programs rdjpgcom and wrjpgcom allow insertion and extraction + of text comments in a JPEG file. + +The application programmer's interface to the library has changed completely. +Notable improvements include: + * We have eliminated the use of callback routines for handling the + uncompressed image data. The application now sees the library as a + set of routines that it calls to read or write image data on a + scanline-by-scanline basis. + * The application image data is represented in a conventional interleaved- + pixel format, rather than as a separate array for each color channel. + This can save a copying step in many programs. + * The handling of compressed data has been cleaned up: the application can + supply routines to source or sink the compressed data. It is possible to + suspend processing on source/sink buffer overrun, although this is not + supported in all operating modes. + * All static state has been eliminated from the library, so that multiple + instances of compression or decompression can be active concurrently. + * JPEG abbreviated datastream formats are supported, ie, quantization and + Huffman tables can be stored separately from the image data. + * And not only that, but the documentation of the library has improved + considerably! + + +The last widely used release before the version 5 rewrite was version 4A of +18-Feb-93. Change logs before that point have been discarded, since they +are not of much interest after the rewrite. diff --git a/src/3rdparty/libjpeg/cjpeg.1 b/src/3rdparty/libjpeg/cjpeg.1 new file mode 100644 index 0000000..01bfa25 --- /dev/null +++ b/src/3rdparty/libjpeg/cjpeg.1 @@ -0,0 +1,325 @@ +.TH CJPEG 1 "30 December 2009" +.SH NAME +cjpeg \- compress an image file to a JPEG file +.SH SYNOPSIS +.B cjpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B cjpeg +compresses the named image file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +The currently supported input file formats are: PPM (PBMPLUS color +format), PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster +Toolkit format). (RLE is supported only if the URT library is available.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-quality " N[,...]" +Scale quantization tables to adjust image quality. Quality is 0 (worst) to +100 (best); default is 75. (See below for more info.) +.TP +.B \-grayscale +Create monochrome JPEG file from color input. Be sure to use this switch when +compressing a grayscale BMP file, because +.B cjpeg +isn't bright enough to notice whether a BMP file uses only shades of gray. +By saying +.BR \-grayscale , +you'll get a smaller JPEG file that takes less time to process. +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. Without this, default +encoding parameters are used. +.B \-optimize +usually makes the JPEG file a little smaller, but +.B cjpeg +runs somewhat slower and needs much more memory. Image quality and speed of +decompression are unaffected by +.BR \-optimize . +.TP +.B \-progressive +Create progressive JPEG file (see below). +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +8/N with all N from 1 to 16. +.TP +.B \-targa +Input file is Targa format. Targa files that contain an "identification" +field will not be automatically recognized by +.BR cjpeg ; +for such files you must specify +.B \-targa +to make +.B cjpeg +treat the input as Targa format. +For most Targa files, you won't need this switch. +.PP +The +.B \-quality +switch lets you trade off compressed file size against quality of the +reconstructed image: the higher the quality setting, the larger the JPEG file, +and the closer the output image will be to the original input. Normally you +want to use the lowest quality setting (smallest file) that decompresses into +something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at +.B \-quality +75, then go up 5 or 10 counts at a time until you are happy with the output +image. (The optimal setting will vary from one image to another.) +.PP +.B \-quality +100 will generate a quantization table of all 1's, minimizing loss in the +quantization step (but there is still information loss in subsampling, as well +as roundoff error). This setting is mainly of interest for experimental +purposes. Quality values above about 95 are +.B not +recommended for normal use; the compressed file size goes up dramatically for +hardly any gain in output image quality. +.PP +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try +.B \-quality +2 (or so) for some amusing Cubist effects. (Note: quality +values below about 25 generate 2-byte quantization tables, which are +considered optional in the JPEG standard. +.B cjpeg +emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use +.B \-baseline +if you need to ensure compatibility at low quality values.) +.PP +The +.B \-quality +option has been extended in IJG version 7 for support of separate quality +settings for luminance and chrominance (or in general, for every provided +quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the +.B \-quality +ratings refer to the quantization table slots, and that the last value is +replicated if there are more q-table slots than parameters. The default +q-table slots are 0 for luminance and 1 for chrominance with default tables as +given in the JPEG standard. This is compatible with the old behaviour in case +that only one parameter is given, which is then used for both luminance and +chrominance (slots 0 and 1). More or custom quantization tables can be set +with +.B \-qtables +and assigned to components with +.B \-qslots +parameter (see the "wizard" switches below). +.B Caution: +You must explicitly add +.BI \-sample " 1x1" +for efficient separate color +quality selection, since the default value used by library is 2x2! +.PP +The +.B \-progressive +switch creates a "progressive JPEG" file. In this type of JPEG file, the data +is stored in multiple scans of increasing quality. If the file is being +transmitted over a slow communications link, the decoder can use the first +scan to display a low-quality image very quickly, and can then improve the +display with each subsequent scan. The final image is exactly equivalent to a +standard JPEG file of the same quality setting, and the total file size is +about the same --- often a little smaller. +.PP +Switches for advanced users: +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-nosmooth +Don't use high-quality downsampling. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.B \-restart 0 +(the default) means no restart markers. +.TP +.BI \-smooth " N" +Smooth the input image to eliminate dithering noise. N, ranging from 1 to +100, indicates the strength of smoothing. 0 (the default) means no smoothing. +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.PP +The +.B \-restart +option inserts extra markers that allow a JPEG decoder to resynchronize after +a transmission error. Without restart markers, any damage to a compressed +file will usually ruin the image from the point of the error to the end of the +image; with restart markers, the damage is usually confined to the portion of +the image up to the next restart marker. Of course, the restart markers +occupy extra space. We recommend +.B \-restart 1 +for images that will be transmitted across unreliable networks such as Usenet. +.PP +The +.B \-smooth +option filters the input to eliminate fine-scale noise. This is often useful +when converting dithered images to JPEG: a moderate smoothing factor of 10 to +50 gets rid of dithering patterns in the input file, resulting in a smaller +JPEG file and a better-looking image. Too large a smoothing factor will +visibly blur the image, however. +.PP +Switches for wizards: +.TP +.B \-arithmetic +Use arithmetic coding. +.B Caution: +arithmetic coded JPEG is not yet widely implemented, so many decoders will be +unable to view an arithmetic coded JPEG file at all. +.TP +.B \-baseline +Force baseline-compatible quantization tables to be generated. This clamps +quantization values to 8 bits even at low quality settings. (This switch is +poorly named, since it does not ensure that the output is actually baseline +JPEG. For example, you can use +.B \-baseline +and +.B \-progressive +together.) +.TP +.BI \-qtables " file" +Use the quantization tables given in the specified text file. +.TP +.BI \-qslots " N[,...]" +Select which quantization table to use for each color component. +.TP +.BI \-sample " HxV[,...]" +Set JPEG sampling factors for each color component. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, \fBdon't use them\fR. These switches are +documented further in the file wizard.txt. +.SH EXAMPLES +.LP +This example compresses the PPM file foo.ppm with a quality factor of +60 and saves the output as foo.jpg: +.IP +.B cjpeg \-quality +.I 60 foo.ppm +.B > +.I foo.jpg +.SH HINTS +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with +.BR cjpeg 's +.B \-quality +and +.B \-smooth +options to get a satisfactory conversion. +.B \-smooth 10 +or so is often helpful. +.PP +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. +.PP +The +.B \-optimize +option to +.B cjpeg +is worth using when you are making a "final" version for posting or archiving. +It's also a win when you are using low quality settings to make very small +JPEG files; the percentage improvement is often a lot more than it is on +larger files. (At present, +.B \-optimize +mode is always selected when generating progressive JPEG files.) +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +GIF input files are no longer supported, to avoid the Unisys LZW patent. +(Conversion of GIF files to JPEG is usually a bad idea anyway.) +.PP +Not all variants of BMP and Targa file formats are supported. +.PP +The +.B \-targa +switch is not a bug, it's a feature. (It would be a bug if the Targa format +designers had not been clueless.) diff --git a/src/3rdparty/libjpeg/ckconfig.c b/src/3rdparty/libjpeg/ckconfig.c new file mode 100644 index 0000000..e658623 --- /dev/null +++ b/src/3rdparty/libjpeg/ckconfig.c @@ -0,0 +1,402 @@ +/* + * ckconfig.c + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + */ + +/* + * This program is intended to help you determine how to configure the JPEG + * software for installation on a particular system. The idea is to try to + * compile and execute this program. If your compiler fails to compile the + * program, make changes as indicated in the comments below. Once you can + * compile the program, run it, and it will produce a "jconfig.h" file for + * your system. + * + * As a general rule, each time you try to compile this program, + * pay attention only to the *first* error message you get from the compiler. + * Many C compilers will issue lots of spurious error messages once they + * have gotten confused. Go to the line indicated in the first error message, + * and read the comments preceding that line to see what to change. + * + * Almost all of the edits you may need to make to this program consist of + * changing a line that reads "#define SOME_SYMBOL" to "#undef SOME_SYMBOL", + * or vice versa. This is called defining or undefining that symbol. + */ + + +/* First we must see if your system has the include files we need. + * We start out with the assumption that your system has all the ANSI-standard + * include files. If you get any error trying to include one of these files, + * undefine the corresponding HAVE_xxx symbol. + */ + +#define HAVE_STDDEF_H /* replace 'define' by 'undef' if error here */ +#ifdef HAVE_STDDEF_H /* next line will be skipped if you undef... */ +#include +#endif + +#define HAVE_STDLIB_H /* same thing for stdlib.h */ +#ifdef HAVE_STDLIB_H +#include +#endif + +#include /* If you ain't got this, you ain't got C. */ + +/* We have to see if your string functions are defined by + * strings.h (old BSD convention) or string.h (everybody else). + * We try the non-BSD convention first; define NEED_BSD_STRINGS + * if the compiler says it can't find string.h. + */ + +#undef NEED_BSD_STRINGS + +#ifdef NEED_BSD_STRINGS +#include +#else +#include +#endif + +/* On some systems (especially older Unix machines), type size_t is + * defined only in the include file . If you get a failure + * on the size_t test below, try defining NEED_SYS_TYPES_H. + */ + +#undef NEED_SYS_TYPES_H /* start by assuming we don't need it */ +#ifdef NEED_SYS_TYPES_H +#include +#endif + + +/* Usually type size_t is defined in one of the include files we've included + * above. If not, you'll get an error on the "typedef size_t my_size_t;" line. + * In that case, first try defining NEED_SYS_TYPES_H just above. + * If that doesn't work, you'll have to search through your system library + * to figure out which include file defines "size_t". Look for a line that + * says "typedef something-or-other size_t;". Then, change the line below + * that says "#include " to instead include the file + * you found size_t in, and define NEED_SPECIAL_INCLUDE. If you can't find + * type size_t anywhere, try replacing "#include " with + * "typedef unsigned int size_t;". + */ + +#undef NEED_SPECIAL_INCLUDE /* assume we DON'T need it, for starters */ + +#ifdef NEED_SPECIAL_INCLUDE +#include +#endif + +typedef size_t my_size_t; /* The payoff: do we have size_t now? */ + + +/* The next question is whether your compiler supports ANSI-style function + * prototypes. You need to know this in order to choose between using + * makefile.ansi and using makefile.unix. + * The #define line below is set to assume you have ANSI function prototypes. + * If you get an error in this group of lines, undefine HAVE_PROTOTYPES. + */ + +#define HAVE_PROTOTYPES + +#ifdef HAVE_PROTOTYPES +int testfunction (int arg1, int * arg2); /* check prototypes */ + +struct methods_struct { /* check method-pointer declarations */ + int (*error_exit) (char *msgtext); + int (*trace_message) (char *msgtext); + int (*another_method) (void); +}; + +int testfunction (int arg1, int * arg2) /* check definitions */ +{ + return arg2[arg1]; +} + +int test2function (void) /* check void arg list */ +{ + return 0; +} +#endif + + +/* Now we want to find out if your compiler knows what "unsigned char" means. + * If you get an error on the "unsigned char un_char;" line, + * then undefine HAVE_UNSIGNED_CHAR. + */ + +#define HAVE_UNSIGNED_CHAR + +#ifdef HAVE_UNSIGNED_CHAR +unsigned char un_char; +#endif + + +/* Now we want to find out if your compiler knows what "unsigned short" means. + * If you get an error on the "unsigned short un_short;" line, + * then undefine HAVE_UNSIGNED_SHORT. + */ + +#define HAVE_UNSIGNED_SHORT + +#ifdef HAVE_UNSIGNED_SHORT +unsigned short un_short; +#endif + + +/* Now we want to find out if your compiler understands type "void". + * If you get an error anywhere in here, undefine HAVE_VOID. + */ + +#define HAVE_VOID + +#ifdef HAVE_VOID +/* Caution: a C++ compiler will insist on complete prototypes */ +typedef void * void_ptr; /* check void * */ +#ifdef HAVE_PROTOTYPES /* check ptr to function returning void */ +typedef void (*void_func) (int a, int b); +#else +typedef void (*void_func) (); +#endif + +#ifdef HAVE_PROTOTYPES /* check void function result */ +void test3function (void_ptr arg1, void_func arg2) +#else +void test3function (arg1, arg2) + void_ptr arg1; + void_func arg2; +#endif +{ + char * locptr = (char *) arg1; /* check casting to and from void * */ + arg1 = (void *) locptr; + (*arg2) (1, 2); /* check call of fcn returning void */ +} +#endif + + +/* Now we want to find out if your compiler knows what "const" means. + * If you get an error here, undefine HAVE_CONST. + */ + +#define HAVE_CONST + +#ifdef HAVE_CONST +static const int carray[3] = {1, 2, 3}; + +#ifdef HAVE_PROTOTYPES +int test4function (const int arg1) +#else +int test4function (arg1) + const int arg1; +#endif +{ + return carray[arg1]; +} +#endif + + +/* If you get an error or warning about this structure definition, + * define INCOMPLETE_TYPES_BROKEN. + */ + +#undef INCOMPLETE_TYPES_BROKEN + +#ifndef INCOMPLETE_TYPES_BROKEN +typedef struct undefined_structure * undef_struct_ptr; +#endif + + +/* If you get an error about duplicate names, + * define NEED_SHORT_EXTERNAL_NAMES. + */ + +#undef NEED_SHORT_EXTERNAL_NAMES + +#ifndef NEED_SHORT_EXTERNAL_NAMES + +int possibly_duplicate_function () +{ + return 0; +} + +int possibly_dupli_function () +{ + return 1; +} + +#endif + + + +/************************************************************************ + * OK, that's it. You should not have to change anything beyond this + * point in order to compile and execute this program. (You might get + * some warnings, but you can ignore them.) + * When you run the program, it will make a couple more tests that it + * can do automatically, and then it will create jconfig.h and print out + * any additional suggestions it has. + ************************************************************************ + */ + + +#ifdef HAVE_PROTOTYPES +int is_char_signed (int arg) +#else +int is_char_signed (arg) + int arg; +#endif +{ + if (arg == 189) { /* expected result for unsigned char */ + return 0; /* type char is unsigned */ + } + else if (arg != -67) { /* expected result for signed char */ + printf("Hmm, it seems 'char' is not eight bits wide on your machine.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + } + return 1; /* assume char is signed otherwise */ +} + + +#ifdef HAVE_PROTOTYPES +int is_shifting_signed (long arg) +#else +int is_shifting_signed (arg) + long arg; +#endif +/* See whether right-shift on a long is signed or not. */ +{ + long res = arg >> 4; + + if (res == -0x7F7E80CL) { /* expected result for signed shift */ + return 1; /* right shift is signed */ + } + /* see if unsigned-shift hack will fix it. */ + /* we can't just test exact value since it depends on width of long... */ + res |= (~0L) << (32-4); + if (res == -0x7F7E80CL) { /* expected result now? */ + return 0; /* right shift is unsigned */ + } + printf("Right shift isn't acting as I expect it to.\n"); + printf("I fear the JPEG software will not work at all.\n\n"); + return 0; /* try it with unsigned anyway */ +} + + +#ifdef HAVE_PROTOTYPES +int main (int argc, char ** argv) +#else +int main (argc, argv) + int argc; + char ** argv; +#endif +{ + char signed_char_check = (char) (-67); + FILE *outfile; + + /* Attempt to write jconfig.h */ + if ((outfile = fopen("jconfig.h", "w")) == NULL) { + printf("Failed to write jconfig.h\n"); + return 1; + } + + /* Write out all the info */ + fprintf(outfile, "/* jconfig.h --- generated by ckconfig.c */\n"); + fprintf(outfile, "/* see jconfig.txt for explanations */\n\n"); +#ifdef HAVE_PROTOTYPES + fprintf(outfile, "#define HAVE_PROTOTYPES\n"); +#else + fprintf(outfile, "#undef HAVE_PROTOTYPES\n"); +#endif +#ifdef HAVE_UNSIGNED_CHAR + fprintf(outfile, "#define HAVE_UNSIGNED_CHAR\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_CHAR\n"); +#endif +#ifdef HAVE_UNSIGNED_SHORT + fprintf(outfile, "#define HAVE_UNSIGNED_SHORT\n"); +#else + fprintf(outfile, "#undef HAVE_UNSIGNED_SHORT\n"); +#endif +#ifdef HAVE_VOID + fprintf(outfile, "/* #define void char */\n"); +#else + fprintf(outfile, "#define void char\n"); +#endif +#ifdef HAVE_CONST + fprintf(outfile, "/* #define const */\n"); +#else + fprintf(outfile, "#define const\n"); +#endif + if (is_char_signed((int) signed_char_check)) + fprintf(outfile, "#undef CHAR_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define CHAR_IS_UNSIGNED\n"); +#ifdef HAVE_STDDEF_H + fprintf(outfile, "#define HAVE_STDDEF_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDDEF_H\n"); +#endif +#ifdef HAVE_STDLIB_H + fprintf(outfile, "#define HAVE_STDLIB_H\n"); +#else + fprintf(outfile, "#undef HAVE_STDLIB_H\n"); +#endif +#ifdef NEED_BSD_STRINGS + fprintf(outfile, "#define NEED_BSD_STRINGS\n"); +#else + fprintf(outfile, "#undef NEED_BSD_STRINGS\n"); +#endif +#ifdef NEED_SYS_TYPES_H + fprintf(outfile, "#define NEED_SYS_TYPES_H\n"); +#else + fprintf(outfile, "#undef NEED_SYS_TYPES_H\n"); +#endif + fprintf(outfile, "#undef NEED_FAR_POINTERS\n"); +#ifdef NEED_SHORT_EXTERNAL_NAMES + fprintf(outfile, "#define NEED_SHORT_EXTERNAL_NAMES\n"); +#else + fprintf(outfile, "#undef NEED_SHORT_EXTERNAL_NAMES\n"); +#endif +#ifdef INCOMPLETE_TYPES_BROKEN + fprintf(outfile, "#define INCOMPLETE_TYPES_BROKEN\n"); +#else + fprintf(outfile, "#undef INCOMPLETE_TYPES_BROKEN\n"); +#endif + fprintf(outfile, "\n#ifdef JPEG_INTERNALS\n\n"); + if (is_shifting_signed(-0x7F7E80B1L)) + fprintf(outfile, "#undef RIGHT_SHIFT_IS_UNSIGNED\n"); + else + fprintf(outfile, "#define RIGHT_SHIFT_IS_UNSIGNED\n"); + fprintf(outfile, "\n#endif /* JPEG_INTERNALS */\n"); + fprintf(outfile, "\n#ifdef JPEG_CJPEG_DJPEG\n\n"); + fprintf(outfile, "#define BMP_SUPPORTED /* BMP image file format */\n"); + fprintf(outfile, "#define GIF_SUPPORTED /* GIF image file format */\n"); + fprintf(outfile, "#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */\n"); + fprintf(outfile, "#undef RLE_SUPPORTED /* Utah RLE image file format */\n"); + fprintf(outfile, "#define TARGA_SUPPORTED /* Targa image file format */\n\n"); + fprintf(outfile, "#undef TWO_FILE_COMMANDLINE /* You may need this on non-Unix systems */\n"); + fprintf(outfile, "#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */\n"); + fprintf(outfile, "#undef DONT_USE_B_MODE\n"); + fprintf(outfile, "/* #define PROGRESS_REPORT */ /* optional */\n"); + fprintf(outfile, "\n#endif /* JPEG_CJPEG_DJPEG */\n"); + + /* Close the jconfig.h file */ + fclose(outfile); + + /* User report */ + printf("Configuration check for Independent JPEG Group's software done.\n"); + printf("\nI have written the jconfig.h file for you.\n\n"); +#ifdef HAVE_PROTOTYPES + printf("You should use makefile.ansi as the starting point for your Makefile.\n"); +#else + printf("You should use makefile.unix as the starting point for your Makefile.\n"); +#endif + +#ifdef NEED_SPECIAL_INCLUDE + printf("\nYou'll need to change jconfig.h to include the system include file\n"); + printf("that you found type size_t in, or add a direct definition of type\n"); + printf("size_t if that's what you used. Just add it to the end.\n"); +#endif + + return 0; +} diff --git a/src/3rdparty/libjpeg/coderules.txt b/src/3rdparty/libjpeg/coderules.txt new file mode 100644 index 0000000..357929f --- /dev/null +++ b/src/3rdparty/libjpeg/coderules.txt @@ -0,0 +1,118 @@ +IJG JPEG LIBRARY: CODING RULES + +Copyright (C) 1991-1996, Thomas G. Lane. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Since numerous people will be contributing code and bug fixes, it's important +to establish a common coding style. The goal of using similar coding styles +is much more important than the details of just what that style is. + +In general we follow the recommendations of "Recommended C Style and Coding +Standards" revision 6.1 (Cannon et al. as modified by Spencer, Keppel and +Brader). This document is available in the IJG FTP archive (see +jpeg/doc/cstyle.ms.tbl.Z, or cstyle.txt.Z for those without nroff/tbl). + +Block comments should be laid out thusly: + +/* + * Block comments in this style. + */ + +We indent statements in K&R style, e.g., + if (test) { + then-part; + } else { + else-part; + } +with two spaces per indentation level. (This indentation convention is +handled automatically by GNU Emacs and many other text editors.) + +Multi-word names should be written in lower case with underscores, e.g., +multi_word_name (not multiWordName). Preprocessor symbols and enum constants +are similar but upper case (MULTI_WORD_NAME). Names should be unique within +the first fifteen characters. (On some older systems, global names must be +unique within six characters. We accommodate this without cluttering the +source code by using macros to substitute shorter names.) + +We use function prototypes everywhere; we rely on automatic source code +transformation to feed prototype-less C compilers. Transformation is done +by the simple and portable tool 'ansi2knr.c' (courtesy of Ghostscript). +ansi2knr is not very bright, so it imposes a format requirement on function +declarations: the function name MUST BEGIN IN COLUMN 1. Thus all functions +should be written in the following style: + +LOCAL(int *) +function_name (int a, char *b) +{ + code... +} + +Note that each function definition must begin with GLOBAL(type), LOCAL(type), +or METHODDEF(type). These macros expand to "static type" or just "type" as +appropriate. They provide a readable indication of the routine's usage and +can readily be changed for special needs. (For instance, special linkage +keywords can be inserted for use in Windows DLLs.) + +ansi2knr does not transform method declarations (function pointers in +structs). We handle these with a macro JMETHOD, defined as + #ifdef HAVE_PROTOTYPES + #define JMETHOD(type,methodname,arglist) type (*methodname) arglist + #else + #define JMETHOD(type,methodname,arglist) type (*methodname) () + #endif +which is used like this: + struct function_pointers { + JMETHOD(void, init_entropy_encoder, (int somearg, jparms *jp)); + JMETHOD(void, term_entropy_encoder, (void)); + }; +Note the set of parentheses surrounding the parameter list. + +A similar solution is used for forward and external function declarations +(see the EXTERN and JPP macros). + +If the code is to work on non-ANSI compilers, we cannot rely on a prototype +declaration to coerce actual parameters into the right types. Therefore, use +explicit casts on actual parameters whenever the actual parameter type is not +identical to the formal parameter. Beware of implicit conversions to "int". + +It seems there are some non-ANSI compilers in which the sizeof() operator +is defined to return int, yet size_t is defined as long. Needless to say, +this is brain-damaged. Always use the SIZEOF() macro in place of sizeof(), +so that the result is guaranteed to be of type size_t. + + +The JPEG library is intended to be used within larger programs. Furthermore, +we want it to be reentrant so that it can be used by applications that process +multiple images concurrently. The following rules support these requirements: + +1. Avoid direct use of file I/O, "malloc", error report printouts, etc; +pass these through the common routines provided. + +2. Minimize global namespace pollution. Functions should be declared static +wherever possible. (Note that our method-based calling conventions help this +a lot: in many modules only the initialization function will ever need to be +called directly, so only that function need be externally visible.) All +global function names should begin with "jpeg_", and should have an +abbreviated name (unique in the first six characters) substituted by macro +when NEED_SHORT_EXTERNAL_NAMES is set. + +3. Don't use global variables; anything that must be used in another module +should be in the common data structures. + +4. Don't use static variables except for read-only constant tables. Variables +that should be private to a module can be placed into private structures (see +the system architecture document, structure.txt). + +5. Source file names should begin with "j" for files that are part of the +library proper; source files that are not part of the library, such as cjpeg.c +and djpeg.c, do not begin with "j". Keep source file names to eight +characters (plus ".c" or ".h", etc) to make life easy for MS-DOSers. Keep +compression and decompression code in separate source files --- some +applications may want only one half of the library. + +Note: these rules (particularly #4) are not followed religiously in the +modules that are used in cjpeg/djpeg but are not part of the JPEG library +proper. Those modules are not really intended to be used in other +applications. diff --git a/src/3rdparty/libjpeg/djpeg.1 b/src/3rdparty/libjpeg/djpeg.1 new file mode 100644 index 0000000..f3722d1 --- /dev/null +++ b/src/3rdparty/libjpeg/djpeg.1 @@ -0,0 +1,252 @@ +.TH DJPEG 1 "3 October 2009" +.SH NAME +djpeg \- decompress a JPEG file to an image file +.SH SYNOPSIS +.B djpeg +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B djpeg +decompresses the named JPEG file, or the standard input if no file is named, +and produces an image file on the standard output. PBMPLUS (PPM/PGM), BMP, +GIF, Targa, or RLE (Utah Raster Toolkit) output format can be selected. +(RLE is supported only if the URT library is available.) +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-grayscale +may be written +.B \-gray +or +.BR \-gr . +Most of the "basic" switches can be abbreviated to as little as one letter. +Upper and lower case are equivalent (thus +.B \-BMP +is the same as +.BR \-bmp ). +British spellings are also accepted (e.g., +.BR \-greyscale ), +though for brevity these are not mentioned below. +.PP +The basic switches are: +.TP +.BI \-colors " N" +Reduce image to at most N colors. This reduces the number of colors used in +the output image, so that it can be displayed on a colormapped display or +stored in a colormapped file format. For example, if you have an 8-bit +display, you'd need to reduce to 256 or fewer colors. +.TP +.BI \-quantize " N" +Same as +.BR \-colors . +.B \-colors +is the recommended name, +.B \-quantize +is provided only for backwards compatibility. +.TP +.B \-fast +Select recommended processing options for fast, low quality output. (The +default options are chosen for highest quality output.) Currently, this is +equivalent to \fB\-dct fast \-nosmooth \-onepass \-dither ordered\fR. +.TP +.B \-grayscale +Force gray-scale output even if JPEG file is color. Useful for viewing on +monochrome displays; also, +.B djpeg +runs noticeably faster in this mode. +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. Currently supported scale factors are +M/N with all M from 1 to 16, where N is the source DCT size, which is 8 for +baseline JPEG. If the /N part is omitted, then M specifies the DCT scaled +size to be applied on the given input. For baseline JPEG this is equivalent +to M/8 scaling, since the source DCT size for baseline JPEG is 8. +Scaling is handy if the image is larger than your screen; also, +.B djpeg +runs much faster when scaling down the output. +.TP +.B \-bmp +Select BMP output format (Windows flavor). 8-bit colormapped format is +emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-gif +Select GIF output format. Since GIF does not support more than 256 colors, +.B \-colors 256 +is assumed (unless you specify a smaller number of colors). +.TP +.B \-os2 +Select BMP output format (OS/2 1.x flavor). 8-bit colormapped format is +emitted if +.B \-colors +or +.B \-grayscale +is specified, or if the JPEG file is gray-scale; otherwise, 24-bit full-color +format is emitted. +.TP +.B \-pnm +Select PBMPLUS (PPM/PGM) output format (this is the default format). +PGM is emitted if the JPEG file is gray-scale or if +.B \-grayscale +is specified; otherwise PPM is emitted. +.TP +.B \-rle +Select RLE output format. (Requires URT library.) +.TP +.B \-targa +Select Targa output format. Gray-scale format is emitted if the JPEG file is +gray-scale or if +.B \-grayscale +is specified; otherwise, colormapped format is emitted if +.B \-colors +is specified; otherwise, 24-bit full-color format is emitted. +.PP +Switches for advanced users: +.TP +.B \-dct int +Use integer DCT method (default). +.TP +.B \-dct fast +Use fast integer DCT (less accurate). +.TP +.B \-dct float +Use floating-point DCT method. +The float method is very slightly more accurate than the int method, but is +much slower unless your machine has very fast floating-point hardware. Also +note that results of the floating-point method may vary slightly across +machines, while the integer methods should give the same results everywhere. +The fast integer method is much less accurate than the other two. +.TP +.B \-dither fs +Use Floyd-Steinberg dithering in color quantization. +.TP +.B \-dither ordered +Use ordered dithering in color quantization. +.TP +.B \-dither none +Do not use dithering in color quantization. +By default, Floyd-Steinberg dithering is applied when quantizing colors; this +is slow but usually produces the best results. Ordered dither is a compromise +between speed and quality; no dithering is fast but usually looks awful. Note +that these switches have no effect unless color quantization is being done. +Ordered dither is only available in +.B \-onepass +mode. +.TP +.BI \-map " file" +Quantize to the colors used in the specified image file. This is useful for +producing multiple files with identical color maps, or for forcing a +predefined set of colors to be used. The +.I file +must be a GIF or PPM file. This option overrides +.B \-colors +and +.BR \-onepass . +.TP +.B \-nosmooth +Don't use high-quality upsampling. +.TP +.B \-onepass +Use one-pass instead of two-pass color quantization. The one-pass method is +faster and needs less memory, but it produces a lower-quality image. +.B \-onepass +is ignored unless you also say +.B \-colors +.IR N . +Also, the one-pass method is always used for gray-scale output (the two-pass +method is no improvement then). +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example decompresses the JPEG file foo.jpg, quantizes it to +256 colors, and saves the output in 8-bit BMP format in foo.bmp: +.IP +.B djpeg \-colors 256 \-bmp +.I foo.jpg +.B > +.I foo.bmp +.SH HINTS +To get a quick preview of an image, use the +.B \-grayscale +and/or +.B \-scale +switches. +.B \-grayscale \-scale 1/8 +is the fastest case. +.PP +Several options are available that trade off image quality to gain speed. +.B \-fast +turns on the recommended settings. +.PP +.B \-dct fast +and/or +.B \-nosmooth +gain speed at a small sacrifice in quality. +When producing a color-quantized image, +.B \-onepass \-dither ordered +is fast but much lower quality than the default behavior. +.B \-dither none +may give acceptable results in two-pass mode, but is seldom tolerable in +one-pass mode. +.PP +If you are fortunate enough to have very fast floating point hardware, +\fB\-dct float\fR may be even faster than \fB\-dct fast\fR. But on most +machines \fB\-dct float\fR is slower than \fB\-dct int\fR; in this case it is +not worth using, because its theoretical accuracy advantage is too small to be +significant in practice. +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +.BR ppm (5), +.BR pgm (5) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +To avoid the Unisys LZW patent, +.B djpeg +produces uncompressed GIF files. These are larger than they should be, but +are readable by standard GIF decoders. diff --git a/src/3rdparty/libjpeg/example.c b/src/3rdparty/libjpeg/example.c new file mode 100644 index 0000000..1d6f6cc --- /dev/null +++ b/src/3rdparty/libjpeg/example.c @@ -0,0 +1,433 @@ +/* + * example.c + * + * This file illustrates how to use the IJG code as a subroutine library + * to read or write JPEG image files. You should look at this code in + * conjunction with the documentation file libjpeg.txt. + * + * This code will not do anything useful as-is, but it may be helpful as a + * skeleton for constructing routines that call the JPEG library. + * + * We present these routines in the same coding style used in the JPEG code + * (ANSI function definitions, etc); but you are of course free to code your + * routines in a different style if you prefer. + */ + +#include + +/* + * Include file for users of JPEG library. + * You will need to have included system headers that define at least + * the typedefs FILE and size_t before you can include jpeglib.h. + * (stdio.h is sufficient on ANSI-conforming systems.) + * You may also wish to include "jerror.h". + */ + +#include "jpeglib.h" + +/* + * is used for the optional error recovery mechanism shown in + * the second part of the example. + */ + +#include + + + +/******************** JPEG COMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to feed data into the JPEG compressor. + * We present a minimal version that does not worry about refinements such + * as error recovery (the JPEG code will just exit() if it gets an error). + */ + + +/* + * IMAGE DATA FORMATS: + * + * The standard input image format is a rectangular array of pixels, with + * each pixel having the same number of "component" values (color channels). + * Each pixel row is an array of JSAMPLEs (which typically are unsigned chars). + * If you are working with color data, then the color values for each pixel + * must be adjacent in the row; for example, R,G,B,R,G,B,R,G,B,... for 24-bit + * RGB color. + * + * For this example, we'll assume that this data structure matches the way + * our application has stored the image in memory, so we can just pass a + * pointer to our image buffer. In particular, let's say that the image is + * RGB color and is described by: + */ + +extern JSAMPLE * image_buffer; /* Points to large array of R,G,B-order data */ +extern int image_height; /* Number of rows in image */ +extern int image_width; /* Number of columns in image */ + + +/* + * Sample routine for JPEG compression. We assume that the target file name + * and a compression quality factor are passed in. + */ + +GLOBAL(void) +write_JPEG_file (char * filename, int quality) +{ + /* This struct contains the JPEG compression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + * It is possible to have several such structures, representing multiple + * compression/decompression processes, in existence at once. We refer + * to any one struct (and its associated working data) as a "JPEG object". + */ + struct jpeg_compress_struct cinfo; + /* This struct represents a JPEG error handler. It is declared separately + * because applications often want to supply a specialized error handler + * (see the second half of this file for an example). But here we just + * take the easy way out and use the standard error handler, which will + * print a message on stderr and call exit() if compression fails. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct jpeg_error_mgr jerr; + /* More stuff */ + FILE * outfile; /* target file */ + JSAMPROW row_pointer[1]; /* pointer to JSAMPLE row[s] */ + int row_stride; /* physical row width in image buffer */ + + /* Step 1: allocate and initialize JPEG compression object */ + + /* We have to set up the error handler first, in case the initialization + * step fails. (Unlikely, but it could happen if you are out of memory.) + * This routine fills in the contents of struct jerr, and returns jerr's + * address which we place into the link field in cinfo. + */ + cinfo.err = jpeg_std_error(&jerr); + /* Now we can initialize the JPEG compression object. */ + jpeg_create_compress(&cinfo); + + /* Step 2: specify data destination (eg, a file) */ + /* Note: steps 2 and 3 can be done in either order. */ + + /* Here we use the library-supplied code to send compressed data to a + * stdio stream. You can also write your own code to do something else. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to write binary files. + */ + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + + /* Step 3: set parameters for compression */ + + /* First we supply a description of the input image. + * Four fields of the cinfo struct must be filled in: + */ + cinfo.image_width = image_width; /* image width and height, in pixels */ + cinfo.image_height = image_height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + /* Now use the library's routine to set default compression parameters. + * (You must set at least cinfo.in_color_space before calling this, + * since the defaults depend on the source color space.) + */ + jpeg_set_defaults(&cinfo); + /* Now you can set any non-default parameters you wish to. + * Here we just illustrate the use of quality (quantization table) scaling: + */ + jpeg_set_quality(&cinfo, quality, TRUE /* limit to baseline-JPEG values */); + + /* Step 4: Start compressor */ + + /* TRUE ensures that we will write a complete interchange-JPEG file. + * Pass TRUE unless you are very sure of what you're doing. + */ + jpeg_start_compress(&cinfo, TRUE); + + /* Step 5: while (scan lines remain to be written) */ + /* jpeg_write_scanlines(...); */ + + /* Here we use the library's state variable cinfo.next_scanline as the + * loop counter, so that we don't have to keep track ourselves. + * To keep things simple, we pass one scanline per call; you can pass + * more if you wish, though. + */ + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + /* jpeg_write_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could pass + * more than one scanline at a time if that's more convenient. + */ + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + (void) jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + + /* Step 6: Finish compression */ + + jpeg_finish_compress(&cinfo); + /* After finish_compress, we can close the output file. */ + fclose(outfile); + + /* Step 7: release JPEG compression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_compress(&cinfo); + + /* And we're done! */ +} + + +/* + * SOME FINE POINTS: + * + * In the above loop, we ignored the return value of jpeg_write_scanlines, + * which is the number of scanlines actually written. We could get away + * with this because we were only relying on the value of cinfo.next_scanline, + * which will be incremented correctly. If you maintain additional loop + * variables then you should be careful to increment them properly. + * Actually, for output to a stdio stream you needn't worry, because + * then jpeg_write_scanlines will write all the lines passed (or else exit + * with a fatal error). Partial writes can only occur if you use a data + * destination module that can demand suspension of the compressor. + * (If you don't know what that's for, you don't need it.) + * + * If the compressor requires full-image buffers (for entropy-coding + * optimization or a multi-scan JPEG file), it will create temporary + * files for anything that doesn't fit within the maximum-memory setting. + * (Note that temp files are NOT needed if you use the default parameters.) + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + * + * Scanlines MUST be supplied in top-to-bottom order if you want your JPEG + * files to be compatible with everyone else's. If you cannot readily read + * your data in that order, you'll need an intermediate array to hold the + * image. See rdtarga.c or rdbmp.c for examples of handling bottom-to-top + * source data using the JPEG code's internal virtual-array mechanisms. + */ + + + +/******************** JPEG DECOMPRESSION SAMPLE INTERFACE *******************/ + +/* This half of the example shows how to read data from the JPEG decompressor. + * It's a bit more refined than the above, in that we show: + * (a) how to modify the JPEG library's standard error-reporting behavior; + * (b) how to allocate workspace using the library's memory manager. + * + * Just to make this example a little different from the first one, we'll + * assume that we do not intend to put the whole image into an in-memory + * buffer, but to send it line-by-line someplace else. We need a one- + * scanline-high JSAMPLE array as a work buffer, and we will let the JPEG + * memory manager allocate it for us. This approach is actually quite useful + * because we don't need to remember to deallocate the buffer separately: it + * will go away automatically when the JPEG object is cleaned up. + */ + + +/* + * ERROR HANDLING: + * + * The JPEG library's standard error handler (jerror.c) is divided into + * several "methods" which you can override individually. This lets you + * adjust the behavior without duplicating a lot of code, which you might + * have to update with each future release. + * + * Our example here shows how to override the "error_exit" method so that + * control is returned to the library's caller when a fatal error occurs, + * rather than calling exit() as the standard error_exit method does. + * + * We use C's setjmp/longjmp facility to return control. This means that the + * routine which calls the JPEG library must first execute a setjmp() call to + * establish the return point. We want the replacement error_exit to do a + * longjmp(). But we need to make the setjmp buffer accessible to the + * error_exit routine. To do this, we make a private extension of the + * standard JPEG error handler object. (If we were using C++, we'd say we + * were making a subclass of the regular error handler.) + * + * Here's the extended error handler struct: + */ + +struct my_error_mgr { + struct jpeg_error_mgr pub; /* "public" fields */ + + jmp_buf setjmp_buffer; /* for return to caller */ +}; + +typedef struct my_error_mgr * my_error_ptr; + +/* + * Here's the routine that will replace the standard error_exit method: + */ + +METHODDEF(void) +my_error_exit (j_common_ptr cinfo) +{ + /* cinfo->err really points to a my_error_mgr struct, so coerce pointer */ + my_error_ptr myerr = (my_error_ptr) cinfo->err; + + /* Always display the message. */ + /* We could postpone this until after returning, if we chose. */ + (*cinfo->err->output_message) (cinfo); + + /* Return control to the setjmp point */ + longjmp(myerr->setjmp_buffer, 1); +} + + +/* + * Sample routine for JPEG decompression. We assume that the source file name + * is passed in. We want to return 1 on success, 0 on error. + */ + + +GLOBAL(int) +read_JPEG_file (char * filename) +{ + /* This struct contains the JPEG decompression parameters and pointers to + * working space (which is allocated as needed by the JPEG library). + */ + struct jpeg_decompress_struct cinfo; + /* We use our private extension JPEG error handler. + * Note that this struct must live as long as the main JPEG parameter + * struct, to avoid dangling-pointer problems. + */ + struct my_error_mgr jerr; + /* More stuff */ + FILE * infile; /* source file */ + JSAMPARRAY buffer; /* Output row buffer */ + int row_stride; /* physical row width in output buffer */ + + /* In this example we want to open the input file before doing anything else, + * so that the setjmp() error recovery below can assume the file is open. + * VERY IMPORTANT: use "b" option to fopen() if you are on a machine that + * requires it in order to read binary files. + */ + + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + return 0; + } + + /* Step 1: allocate and initialize JPEG decompression object */ + + /* We set up the normal JPEG error routines, then override error_exit. */ + cinfo.err = jpeg_std_error(&jerr.pub); + jerr.pub.error_exit = my_error_exit; + /* Establish the setjmp return context for my_error_exit to use. */ + if (setjmp(jerr.setjmp_buffer)) { + /* If we get here, the JPEG code has signaled an error. + * We need to clean up the JPEG object, close the input file, and return. + */ + jpeg_destroy_decompress(&cinfo); + fclose(infile); + return 0; + } + /* Now we can initialize the JPEG decompression object. */ + jpeg_create_decompress(&cinfo); + + /* Step 2: specify data source (eg, a file) */ + + jpeg_stdio_src(&cinfo, infile); + + /* Step 3: read file parameters with jpeg_read_header() */ + + (void) jpeg_read_header(&cinfo, TRUE); + /* We can ignore the return value from jpeg_read_header since + * (a) suspension is not possible with the stdio data source, and + * (b) we passed TRUE to reject a tables-only JPEG file as an error. + * See libjpeg.txt for more info. + */ + + /* Step 4: set parameters for decompression */ + + /* In this example, we don't need to change any of the defaults set by + * jpeg_read_header(), so we do nothing here. + */ + + /* Step 5: Start decompressor */ + + (void) jpeg_start_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* We may need to do some setup of our own at this point before reading + * the data. After jpeg_start_decompress() we have the correct scaled + * output image dimensions available, as well as the output colormap + * if we asked for color quantization. + * In this example, we need to make an output work buffer of the right size. + */ + /* JSAMPLEs per row in output buffer */ + row_stride = cinfo.output_width * cinfo.output_components; + /* Make a one-row-high sample array that will go away when done with image */ + buffer = (*cinfo.mem->alloc_sarray) + ((j_common_ptr) &cinfo, JPOOL_IMAGE, row_stride, 1); + + /* Step 6: while (scan lines remain to be read) */ + /* jpeg_read_scanlines(...); */ + + /* Here we use the library's state variable cinfo.output_scanline as the + * loop counter, so that we don't have to keep track ourselves. + */ + while (cinfo.output_scanline < cinfo.output_height) { + /* jpeg_read_scanlines expects an array of pointers to scanlines. + * Here the array is only one element long, but you could ask for + * more than one scanline at a time if that's more convenient. + */ + (void) jpeg_read_scanlines(&cinfo, buffer, 1); + /* Assume put_scanline_someplace wants a pointer and sample count. */ + put_scanline_someplace(buffer[0], row_stride); + } + + /* Step 7: Finish decompression */ + + (void) jpeg_finish_decompress(&cinfo); + /* We can ignore the return value since suspension is not possible + * with the stdio data source. + */ + + /* Step 8: Release JPEG decompression object */ + + /* This is an important step since it will release a good deal of memory. */ + jpeg_destroy_decompress(&cinfo); + + /* After finish_decompress, we can close the input file. + * Here we postpone it until after no more JPEG errors are possible, + * so as to simplify the setjmp error logic above. (Actually, I don't + * think that jpeg_destroy can do an error exit, but why assume anything...) + */ + fclose(infile); + + /* At this point you may want to check to see whether any corrupt-data + * warnings occurred (test whether jerr.pub.num_warnings is nonzero). + */ + + /* And we're done! */ + return 1; +} + + +/* + * SOME FINE POINTS: + * + * In the above code, we ignored the return value of jpeg_read_scanlines, + * which is the number of scanlines actually read. We could get away with + * this because we asked for only one line at a time and we weren't using + * a suspending data source. See libjpeg.txt for more info. + * + * We cheated a bit by calling alloc_sarray() after jpeg_start_decompress(); + * we should have done it beforehand to ensure that the space would be + * counted against the JPEG max_memory setting. In some systems the above + * code would risk an out-of-memory error. However, in general we don't + * know the output image dimensions before jpeg_start_decompress(), unless we + * call jpeg_calc_output_dimensions(). See libjpeg.txt for more about this. + * + * Scanlines are returned in the same order as they appear in the JPEG file, + * which is standardly top-to-bottom. If you must emit data bottom-to-top, + * you can use one of the virtual arrays provided by the JPEG memory manager + * to invert the data. See wrbmp.c for an example. + * + * As with compression, some operating modes may require temporary files. + * On some systems you may need to set up a signal handler to ensure that + * temporary files are deleted if the program is interrupted. See libjpeg.txt. + */ diff --git a/src/3rdparty/libjpeg/filelist.txt b/src/3rdparty/libjpeg/filelist.txt new file mode 100644 index 0000000..7e05386 --- /dev/null +++ b/src/3rdparty/libjpeg/filelist.txt @@ -0,0 +1,215 @@ +IJG JPEG LIBRARY: FILE LIST + +Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +Here is a road map to the files in the IJG JPEG distribution. The +distribution includes the JPEG library proper, plus two application +programs ("cjpeg" and "djpeg") which use the library to convert JPEG +files to and from some other popular image formats. A third application +"jpegtran" uses the library to do lossless conversion between different +variants of JPEG. There are also two stand-alone applications, +"rdjpgcom" and "wrjpgcom". + + +THE JPEG LIBRARY +================ + +Include files: + +jpeglib.h JPEG library's exported data and function declarations. +jconfig.h Configuration declarations. Note: this file is not present + in the distribution; it is generated during installation. +jmorecfg.h Additional configuration declarations; need not be changed + for a standard installation. +jerror.h Declares JPEG library's error and trace message codes. +jinclude.h Central include file used by all IJG .c files to reference + system include files. +jpegint.h JPEG library's internal data structures. +jdct.h Private declarations for forward & reverse DCT subsystems. +jmemsys.h Private declarations for memory management subsystem. +jversion.h Version information. + +Applications using the library should include jpeglib.h (which in turn +includes jconfig.h and jmorecfg.h). Optionally, jerror.h may be included +if the application needs to reference individual JPEG error codes. The +other include files are intended for internal use and would not normally +be included by an application program. (cjpeg/djpeg/etc do use jinclude.h, +since its function is to improve portability of the whole IJG distribution. +Most other applications will directly include the system include files they +want, and hence won't need jinclude.h.) + + +C source code files: + +These files contain most of the functions intended to be called directly by +an application program: + +jcapimin.c Application program interface: core routines for compression. +jcapistd.c Application program interface: standard compression. +jdapimin.c Application program interface: core routines for decompression. +jdapistd.c Application program interface: standard decompression. +jcomapi.c Application program interface routines common to compression + and decompression. +jcparam.c Compression parameter setting helper routines. +jctrans.c API and library routines for transcoding compression. +jdtrans.c API and library routines for transcoding decompression. + +Compression side of the library: + +jcinit.c Initialization: determines which other modules to use. +jcmaster.c Master control: setup and inter-pass sequencing logic. +jcmainct.c Main buffer controller (preprocessor => JPEG compressor). +jcprepct.c Preprocessor buffer controller. +jccoefct.c Buffer controller for DCT coefficient buffer. +jccolor.c Color space conversion. +jcsample.c Downsampling. +jcdctmgr.c DCT manager (DCT implementation selection & control). +jfdctint.c Forward DCT using slow-but-accurate integer method. +jfdctfst.c Forward DCT using faster, less accurate integer method. +jfdctflt.c Forward DCT using floating-point arithmetic. +jchuff.c Huffman entropy coding. +jcarith.c Arithmetic entropy coding. +jcmarker.c JPEG marker writing. +jdatadst.c Data destination managers for memory and stdio output. + +Decompression side of the library: + +jdmaster.c Master control: determines which other modules to use. +jdinput.c Input controller: controls input processing modules. +jdmainct.c Main buffer controller (JPEG decompressor => postprocessor). +jdcoefct.c Buffer controller for DCT coefficient buffer. +jdpostct.c Postprocessor buffer controller. +jdmarker.c JPEG marker reading. +jdhuff.c Huffman entropy decoding. +jdarith.c Arithmetic entropy decoding. +jddctmgr.c IDCT manager (IDCT implementation selection & control). +jidctint.c Inverse DCT using slow-but-accurate integer method. +jidctfst.c Inverse DCT using faster, less accurate integer method. +jidctflt.c Inverse DCT using floating-point arithmetic. +jdsample.c Upsampling. +jdcolor.c Color space conversion. +jdmerge.c Merged upsampling/color conversion (faster, lower quality). +jquant1.c One-pass color quantization using a fixed-spacing colormap. +jquant2.c Two-pass color quantization using a custom-generated colormap. + Also handles one-pass quantization to an externally given map. +jdatasrc.c Data source managers for memory and stdio input. + +Support files for both compression and decompression: + +jaricom.c Tables for common use in arithmetic entropy encoding and + decoding routines. +jerror.c Standard error handling routines (application replaceable). +jmemmgr.c System-independent (more or less) memory management code. +jutils.c Miscellaneous utility routines. + +jmemmgr.c relies on a system-dependent memory management module. The IJG +distribution includes the following implementations of the system-dependent +module: + +jmemnobs.c "No backing store": assumes adequate virtual memory exists. +jmemansi.c Makes temporary files with ANSI-standard routine tmpfile(). +jmemname.c Makes temporary files with program-generated file names. +jmemdos.c Custom implementation for MS-DOS (16-bit environment only): + can use extended and expanded memory as well as temp files. +jmemmac.c Custom implementation for Apple Macintosh. + +Exactly one of the system-dependent modules should be configured into an +installed JPEG library (see install.txt for hints about which one to use). +On unusual systems you may find it worthwhile to make a special +system-dependent memory manager. + + +Non-C source code files: + +jmemdosa.asm 80x86 assembly code support for jmemdos.c; used only in + MS-DOS-specific configurations of the JPEG library. + + +CJPEG/DJPEG/JPEGTRAN +==================== + +Include files: + +cdjpeg.h Declarations shared by cjpeg/djpeg/jpegtran modules. +cderror.h Additional error and trace message codes for cjpeg et al. +transupp.h Declarations for jpegtran support routines in transupp.c. + +C source code files: + +cjpeg.c Main program for cjpeg. +djpeg.c Main program for djpeg. +jpegtran.c Main program for jpegtran. +cdjpeg.c Utility routines used by all three programs. +rdcolmap.c Code to read a colormap file for djpeg's "-map" switch. +rdswitch.c Code to process some of cjpeg's more complex switches. + Also used by jpegtran. +transupp.c Support code for jpegtran: lossless image manipulations. + +Image file reader modules for cjpeg: + +rdbmp.c BMP file input. +rdgif.c GIF file input (now just a stub). +rdppm.c PPM/PGM file input. +rdrle.c Utah RLE file input. +rdtarga.c Targa file input. + +Image file writer modules for djpeg: + +wrbmp.c BMP file output. +wrgif.c GIF file output (a mere shadow of its former self). +wrppm.c PPM/PGM file output. +wrrle.c Utah RLE file output. +wrtarga.c Targa file output. + + +RDJPGCOM/WRJPGCOM +================= + +C source code files: + +rdjpgcom.c Stand-alone rdjpgcom application. +wrjpgcom.c Stand-alone wrjpgcom application. + +These programs do not depend on the IJG library. They do use +jconfig.h and jinclude.h, only to improve portability. + + +ADDITIONAL FILES +================ + +Documentation (see README for a guide to the documentation files): + +README Master documentation file. +*.txt Other documentation files. +*.1 Documentation in Unix man page format. +change.log Version-to-version change highlights. +example.c Sample code for calling JPEG library. + +Configuration/installation files and programs (see install.txt for more info): + +configure Unix shell script to perform automatic configuration. +configure.ac Source file for use with Autoconf to generate configure. +ltmain.sh Support scripts for configure (from GNU libtool). +config.guess +config.sub +depcomp +missing +install-sh Install shell script for those Unix systems lacking one. +Makefile.in Makefile input for configure. +Makefile.am Source file for use with Automake to generate Makefile.in. +ckconfig.c Program to generate jconfig.h on non-Unix systems. +jconfig.txt Template for making jconfig.h by hand. +mak*.* Sample makefiles for particular systems. +jconfig.* Sample jconfig.h for particular systems. +libjpeg.map Script to generate shared library with versioned symbols. +aclocal.m4 M4 macro definitions for use with Autoconf. +ansi2knr.c De-ANSIfier for pre-ANSI C compilers (courtesy of + L. Peter Deutsch and Aladdin Enterprises). + +Test files (see install.txt for test procedure): + +test*.* Source and comparison files for confidence test. + These are binary image files, NOT text files. diff --git a/src/3rdparty/libjpeg/jaricom.c b/src/3rdparty/libjpeg/jaricom.c new file mode 100644 index 0000000..f43e2ea --- /dev/null +++ b/src/3rdparty/libjpeg/jaricom.c @@ -0,0 +1,153 @@ +/* + * jaricom.c + * + * Developed 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains probability estimation tables for common use in + * arithmetic entropy encoding and decoding routines. + * + * This data represents Table D.2 in the JPEG spec (ISO/IEC IS 10918-1 + * and CCITT Recommendation ITU-T T.81) and Table 24 in the JBIG spec + * (ISO/IEC IS 11544 and CCITT Recommendation ITU-T T.82). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* The following #define specifies the packing of the four components + * into the compact INT32 representation. + * Note that this formula must match the actual arithmetic encoder + * and decoder implementation. The implementation has to be changed + * if this formula is changed. + * The current organization is leaned on Markus Kuhn's JBIG + * implementation (jbig_tab.c). + */ + +#define V(i,a,b,c,d) (((INT32)a << 16) | ((INT32)c << 8) | ((INT32)d << 7) | b) + +const INT32 jpeg_aritab[113+1] = { +/* + * Index, Qe_Value, Next_Index_LPS, Next_Index_MPS, Switch_MPS + */ + V( 0, 0x5a1d, 1, 1, 1 ), + V( 1, 0x2586, 14, 2, 0 ), + V( 2, 0x1114, 16, 3, 0 ), + V( 3, 0x080b, 18, 4, 0 ), + V( 4, 0x03d8, 20, 5, 0 ), + V( 5, 0x01da, 23, 6, 0 ), + V( 6, 0x00e5, 25, 7, 0 ), + V( 7, 0x006f, 28, 8, 0 ), + V( 8, 0x0036, 30, 9, 0 ), + V( 9, 0x001a, 33, 10, 0 ), + V( 10, 0x000d, 35, 11, 0 ), + V( 11, 0x0006, 9, 12, 0 ), + V( 12, 0x0003, 10, 13, 0 ), + V( 13, 0x0001, 12, 13, 0 ), + V( 14, 0x5a7f, 15, 15, 1 ), + V( 15, 0x3f25, 36, 16, 0 ), + V( 16, 0x2cf2, 38, 17, 0 ), + V( 17, 0x207c, 39, 18, 0 ), + V( 18, 0x17b9, 40, 19, 0 ), + V( 19, 0x1182, 42, 20, 0 ), + V( 20, 0x0cef, 43, 21, 0 ), + V( 21, 0x09a1, 45, 22, 0 ), + V( 22, 0x072f, 46, 23, 0 ), + V( 23, 0x055c, 48, 24, 0 ), + V( 24, 0x0406, 49, 25, 0 ), + V( 25, 0x0303, 51, 26, 0 ), + V( 26, 0x0240, 52, 27, 0 ), + V( 27, 0x01b1, 54, 28, 0 ), + V( 28, 0x0144, 56, 29, 0 ), + V( 29, 0x00f5, 57, 30, 0 ), + V( 30, 0x00b7, 59, 31, 0 ), + V( 31, 0x008a, 60, 32, 0 ), + V( 32, 0x0068, 62, 33, 0 ), + V( 33, 0x004e, 63, 34, 0 ), + V( 34, 0x003b, 32, 35, 0 ), + V( 35, 0x002c, 33, 9, 0 ), + V( 36, 0x5ae1, 37, 37, 1 ), + V( 37, 0x484c, 64, 38, 0 ), + V( 38, 0x3a0d, 65, 39, 0 ), + V( 39, 0x2ef1, 67, 40, 0 ), + V( 40, 0x261f, 68, 41, 0 ), + V( 41, 0x1f33, 69, 42, 0 ), + V( 42, 0x19a8, 70, 43, 0 ), + V( 43, 0x1518, 72, 44, 0 ), + V( 44, 0x1177, 73, 45, 0 ), + V( 45, 0x0e74, 74, 46, 0 ), + V( 46, 0x0bfb, 75, 47, 0 ), + V( 47, 0x09f8, 77, 48, 0 ), + V( 48, 0x0861, 78, 49, 0 ), + V( 49, 0x0706, 79, 50, 0 ), + V( 50, 0x05cd, 48, 51, 0 ), + V( 51, 0x04de, 50, 52, 0 ), + V( 52, 0x040f, 50, 53, 0 ), + V( 53, 0x0363, 51, 54, 0 ), + V( 54, 0x02d4, 52, 55, 0 ), + V( 55, 0x025c, 53, 56, 0 ), + V( 56, 0x01f8, 54, 57, 0 ), + V( 57, 0x01a4, 55, 58, 0 ), + V( 58, 0x0160, 56, 59, 0 ), + V( 59, 0x0125, 57, 60, 0 ), + V( 60, 0x00f6, 58, 61, 0 ), + V( 61, 0x00cb, 59, 62, 0 ), + V( 62, 0x00ab, 61, 63, 0 ), + V( 63, 0x008f, 61, 32, 0 ), + V( 64, 0x5b12, 65, 65, 1 ), + V( 65, 0x4d04, 80, 66, 0 ), + V( 66, 0x412c, 81, 67, 0 ), + V( 67, 0x37d8, 82, 68, 0 ), + V( 68, 0x2fe8, 83, 69, 0 ), + V( 69, 0x293c, 84, 70, 0 ), + V( 70, 0x2379, 86, 71, 0 ), + V( 71, 0x1edf, 87, 72, 0 ), + V( 72, 0x1aa9, 87, 73, 0 ), + V( 73, 0x174e, 72, 74, 0 ), + V( 74, 0x1424, 72, 75, 0 ), + V( 75, 0x119c, 74, 76, 0 ), + V( 76, 0x0f6b, 74, 77, 0 ), + V( 77, 0x0d51, 75, 78, 0 ), + V( 78, 0x0bb6, 77, 79, 0 ), + V( 79, 0x0a40, 77, 48, 0 ), + V( 80, 0x5832, 80, 81, 1 ), + V( 81, 0x4d1c, 88, 82, 0 ), + V( 82, 0x438e, 89, 83, 0 ), + V( 83, 0x3bdd, 90, 84, 0 ), + V( 84, 0x34ee, 91, 85, 0 ), + V( 85, 0x2eae, 92, 86, 0 ), + V( 86, 0x299a, 93, 87, 0 ), + V( 87, 0x2516, 86, 71, 0 ), + V( 88, 0x5570, 88, 89, 1 ), + V( 89, 0x4ca9, 95, 90, 0 ), + V( 90, 0x44d9, 96, 91, 0 ), + V( 91, 0x3e22, 97, 92, 0 ), + V( 92, 0x3824, 99, 93, 0 ), + V( 93, 0x32b4, 99, 94, 0 ), + V( 94, 0x2e17, 93, 86, 0 ), + V( 95, 0x56a8, 95, 96, 1 ), + V( 96, 0x4f46, 101, 97, 0 ), + V( 97, 0x47e5, 102, 98, 0 ), + V( 98, 0x41cf, 103, 99, 0 ), + V( 99, 0x3c3d, 104, 100, 0 ), + V( 100, 0x375e, 99, 93, 0 ), + V( 101, 0x5231, 105, 102, 0 ), + V( 102, 0x4c0f, 106, 103, 0 ), + V( 103, 0x4639, 107, 104, 0 ), + V( 104, 0x415e, 103, 99, 0 ), + V( 105, 0x5627, 105, 106, 1 ), + V( 106, 0x50e7, 108, 107, 0 ), + V( 107, 0x4b85, 109, 103, 0 ), + V( 108, 0x5597, 110, 109, 0 ), + V( 109, 0x504f, 111, 107, 0 ), + V( 110, 0x5a10, 110, 111, 1 ), + V( 111, 0x5522, 112, 109, 0 ), + V( 112, 0x59eb, 112, 111, 1 ), +/* + * This last entry is used for fixed probability estimate of 0.5 + * as recommended in Section 10.3 Table 5 of ITU-T Rec. T.851. + */ + V( 113, 0x5a1d, 113, 113, 0 ) +}; diff --git a/src/3rdparty/libjpeg/jcapimin.c b/src/3rdparty/libjpeg/jcapimin.c new file mode 100644 index 0000000..563ab42 --- /dev/null +++ b/src/3rdparty/libjpeg/jcapimin.c @@ -0,0 +1,282 @@ +/* + * jcapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-compression case or the transcoding-only + * case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jcapistd.c. But also see jcparam.c for + * parameter-setup helper routines, jcomapi.c for routines shared by + * compression and decompression, and jctrans.c for the transcoding case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG compression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateCompress (j_compress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_compress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_compress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_compress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = FALSE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->dest = NULL; + + cinfo->comp_info = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + cinfo->quant_tbl_ptrs[i] = NULL; + cinfo->q_scale_factor[i] = 100; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + cinfo->script_space = NULL; + + cinfo->input_gamma = 1.0; /* in case application forgets */ + + /* OK, I'm ready */ + cinfo->global_state = CSTATE_START; +} + + +/* + * Destruction of a JPEG compression object + */ + +GLOBAL(void) +jpeg_destroy_compress (j_compress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG compression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_compress (j_compress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Forcibly suppress or un-suppress all quantization and Huffman tables. + * Marks all currently defined tables as already written (if suppress) + * or not written (if !suppress). This will control whether they get emitted + * by a subsequent jpeg_start_compress call. + * + * This routine is exported for use by applications that want to produce + * abbreviated JPEG datastreams. It logically belongs in jcparam.c, but + * since it is called by jpeg_start_compress, we put it here --- otherwise + * jcparam.o would be linked whether the application used it or not. + */ + +GLOBAL(void) +jpeg_suppress_tables (j_compress_ptr cinfo, boolean suppress) +{ + int i; + JQUANT_TBL * qtbl; + JHUFF_TBL * htbl; + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if ((qtbl = cinfo->quant_tbl_ptrs[i]) != NULL) + qtbl->sent_table = suppress; + } + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if ((htbl = cinfo->dc_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + if ((htbl = cinfo->ac_huff_tbl_ptrs[i]) != NULL) + htbl->sent_table = suppress; + } +} + + +/* + * Finish JPEG compression. + * + * If a multipass operating mode was selected, this may do a great deal of + * work including most of the actual output. + */ + +GLOBAL(void) +jpeg_finish_compress (j_compress_ptr cinfo) +{ + JDIMENSION iMCU_row; + + if (cinfo->global_state == CSTATE_SCANNING || + cinfo->global_state == CSTATE_RAW_OK) { + /* Terminate first pass */ + if (cinfo->next_scanline < cinfo->image_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_pass) (cinfo); + } else if (cinfo->global_state != CSTATE_WRCOEFS) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any remaining passes */ + while (! cinfo->master->is_last_pass) { + (*cinfo->master->prepare_for_pass) (cinfo); + for (iMCU_row = 0; iMCU_row < cinfo->total_iMCU_rows; iMCU_row++) { + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) iMCU_row; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* We bypass the main controller and invoke coef controller directly; + * all work is being done from the coefficient buffer. + */ + if (! (*cinfo->coef->compress_data) (cinfo, (JSAMPIMAGE) NULL)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } + (*cinfo->master->finish_pass) (cinfo); + } + /* Write EOI, do final cleanup */ + (*cinfo->marker->write_file_trailer) (cinfo); + (*cinfo->dest->term_destination) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); +} + + +/* + * Write a special marker. + * This is only recommended for writing COM or APPn markers. + * Must be called after jpeg_start_compress() and before + * first call to jpeg_write_scanlines() or jpeg_write_raw_data(). + */ + +GLOBAL(void) +jpeg_write_marker (j_compress_ptr cinfo, int marker, + const JOCTET *dataptr, unsigned int datalen) +{ + JMETHOD(void, write_marker_byte, (j_compress_ptr info, int val)); + + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); + write_marker_byte = cinfo->marker->write_marker_byte; /* copy for speed */ + while (datalen--) { + (*write_marker_byte) (cinfo, *dataptr); + dataptr++; + } +} + +/* Same, but piecemeal. */ + +GLOBAL(void) +jpeg_write_m_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +{ + if (cinfo->next_scanline != 0 || + (cinfo->global_state != CSTATE_SCANNING && + cinfo->global_state != CSTATE_RAW_OK && + cinfo->global_state != CSTATE_WRCOEFS)) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + (*cinfo->marker->write_marker_header) (cinfo, marker, datalen); +} + +GLOBAL(void) +jpeg_write_m_byte (j_compress_ptr cinfo, int val) +{ + (*cinfo->marker->write_marker_byte) (cinfo, val); +} + + +/* + * Alternate compression function: just write an abbreviated table file. + * Before calling this, all parameters and a data destination must be set up. + * + * To produce a pair of files containing abbreviated tables and abbreviated + * image data, one would proceed as follows: + * + * initialize JPEG object + * set JPEG parameters + * set destination to table file + * jpeg_write_tables(cinfo); + * set destination to image file + * jpeg_start_compress(cinfo, FALSE); + * write data... + * jpeg_finish_compress(cinfo); + * + * jpeg_write_tables has the side effect of marking all tables written + * (same as jpeg_suppress_tables(..., TRUE)). Thus a subsequent start_compress + * will not re-emit the tables unless it is passed write_all_tables=TRUE. + */ + +GLOBAL(void) +jpeg_write_tables (j_compress_ptr cinfo) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Initialize the marker writer ... bit of a crock to do it here. */ + jinit_marker_writer(cinfo); + /* Write them tables! */ + (*cinfo->marker->write_tables_only) (cinfo); + /* And clean up. */ + (*cinfo->dest->term_destination) (cinfo); + /* + * In library releases up through v6a, we called jpeg_abort() here to free + * any working memory allocated by the destination manager and marker + * writer. Some applications had a problem with that: they allocated space + * of their own from the library memory manager, and didn't want it to go + * away during write_tables. So now we do nothing. This will cause a + * memory leak if an app calls write_tables repeatedly without doing a full + * compression cycle or otherwise resetting the JPEG object. However, that + * seems less bad than unexpectedly freeing memory in the normal case. + * An app that prefers the old behavior can call jpeg_abort for itself after + * each call to jpeg_write_tables(). + */ +} diff --git a/src/3rdparty/libjpeg/jcapistd.c b/src/3rdparty/libjpeg/jcapistd.c new file mode 100644 index 0000000..c0320b1 --- /dev/null +++ b/src/3rdparty/libjpeg/jcapistd.c @@ -0,0 +1,161 @@ +/* + * jcapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the compression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-compression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_compress, it will end up linking in the entire compressor. + * We thus must separate this file from jcapimin.c to avoid linking the + * whole compression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Compression initialization. + * Before calling this, all parameters and a data destination must be set up. + * + * We require a write_all_tables parameter as a failsafe check when writing + * multiple datastreams from the same compression object. Since prior runs + * will have left all the tables marked sent_table=TRUE, a subsequent run + * would emit an abbreviated stream (no tables) by default. This may be what + * is wanted, but for safety's sake it should not be the default behavior: + * programmers should have to make a deliberate choice to emit abbreviated + * images. Therefore the documentation and examples should encourage people + * to pass write_all_tables=TRUE; then it will take active thought to do the + * wrong thing. + */ + +GLOBAL(void) +jpeg_start_compress (j_compress_ptr cinfo, boolean write_all_tables) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (write_all_tables) + jpeg_suppress_tables(cinfo, FALSE); /* mark all tables to be written */ + + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + jinit_compress_master(cinfo); + /* Set up for the first pass */ + (*cinfo->master->prepare_for_pass) (cinfo); + /* Ready for application to drive first pass through jpeg_write_scanlines + * or jpeg_write_raw_data. + */ + cinfo->next_scanline = 0; + cinfo->global_state = (cinfo->raw_data_in ? CSTATE_RAW_OK : CSTATE_SCANNING); +} + + +/* + * Write some scanlines of data to the JPEG compressor. + * + * The return value will be the number of lines actually written. + * This should be less than the supplied num_lines only in case that + * the data destination module has requested suspension of the compressor, + * or if more than image_height scanlines are passed in. + * + * Note: we warn about excess calls to jpeg_write_scanlines() since + * this likely signals an application programmer error. However, + * excess scanlines passed in the last valid call are *silently* ignored, + * so that the application need not adjust num_lines for end-of-image + * when using a multiple-scanline buffer. + */ + +GLOBAL(JDIMENSION) +jpeg_write_scanlines (j_compress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION num_lines) +{ + JDIMENSION row_ctr, rows_left; + + if (cinfo->global_state != CSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_scanlines. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_scanlines. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Ignore any extra scanlines at bottom of image. */ + rows_left = cinfo->image_height - cinfo->next_scanline; + if (num_lines > rows_left) + num_lines = rows_left; + + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, num_lines); + cinfo->next_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to write raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_write_raw_data (j_compress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION num_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != CSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->next_scanline >= cinfo->image_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->next_scanline; + cinfo->progress->pass_limit = (long) cinfo->image_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Give master control module another chance if this is first call to + * jpeg_write_raw_data. This lets output of the frame/scan headers be + * delayed so that application can write COM, etc, markers between + * jpeg_start_compress and jpeg_write_raw_data. + */ + if (cinfo->master->call_pass_startup) + (*cinfo->master->pass_startup) (cinfo); + + /* Verify that at least one iMCU row has been passed. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * DCTSIZE; + if (num_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Directly compress the row. */ + if (! (*cinfo->coef->compress_data) (cinfo, data)) { + /* If compressor did not consume the whole row, suspend processing. */ + return 0; + } + + /* OK, we processed one iMCU row. */ + cinfo->next_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} diff --git a/src/3rdparty/libjpeg/jcarith.c b/src/3rdparty/libjpeg/jcarith.c new file mode 100644 index 0000000..0b7ea55 --- /dev/null +++ b/src/3rdparty/libjpeg/jcarith.c @@ -0,0 +1,934 @@ +/* + * jcarith.c + * + * Developed 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy encoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy encoder object for arithmetic encoding. */ + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval, layout as in sec. D.1.3 */ + INT32 a; /* A register, normalized size of coding interval */ + INT32 sc; /* counter for stacked 0xFF values which might overflow */ + INT32 zc; /* counter for pending 0x00 output values which might * + * be discarded at the end ("Pacman" termination) */ + int ct; /* bit shift counter, determines when next byte will be written */ + int buffer; /* buffer for most recent output byte != 0xFF */ + + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_encoder; + +typedef arith_entropy_encoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + +/* NOTE: Uncomment the following #define if you want to use the + * given formula for calculating the AC conditioning parameter Kx + * for spectral selection progressive coding in section G.1.3.2 + * of the spec (Kx = Kmin + SRL (8 + Se - Kmin) 4). + * Although the spec and P&M authors claim that this "has proven + * to give good results for 8 bit precision samples", I'm not + * convinced yet that this is really beneficial. + * Early tests gave only very marginal compression enhancements + * (a few - around 5 or so - bytes even for very large files), + * which would turn out rather negative if we'd suppress the + * DAC (Define Arithmetic Conditioning) marker segments for + * the default parameters in the future. + * Note that currently the marker writing module emits 12-byte + * DAC segments for a full-component scan in a color image. + * This is not worth worrying about IMHO. However, since the + * spec defines the default values to be used if the tables + * are omitted (unlike Huffman tables, which are required + * anyway), one might optimize this behaviour in the future, + * and then it would be disadvantageous to use custom tables if + * they don't provide sufficient gain to exceed the DAC size. + * + * On the other hand, I'd consider it as a reasonable result + * that the conditioning has no significant influence on the + * compression performance. This means that the basic + * statistical model is already rather stable. + * + * Thus, at the moment, we use the default conditioning values + * anyway, and do not use the custom formula. + * +#define CALCULATE_SPECTRAL_CONDITIONING + */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +LOCAL(void) +emit_byte (int val, j_compress_ptr cinfo) +/* Write next output byte; we do not support suspension in this module. */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *dest->next_output_byte++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); +} + + +/* + * Finish up at the end of an arithmetic-compressed scan. + */ + +METHODDEF(void) +finish_pass (j_compress_ptr cinfo) +{ + arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + INT32 temp; + + /* Section D.1.8: Termination of encoding */ + + /* Find the e->c in the coding interval with the largest + * number of trailing zero bits */ + if ((temp = (e->a - 1 + e->c) & 0xFFFF0000L) < e->c) + e->c = temp + 0x8000L; + else + e->c = temp; + /* Send remaining bytes to output */ + e->c <<= e->ct; + if (e->c & 0xF8000000L) { + /* One final overflow has to be handled */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + } else { + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + } + /* Output final bytes only if they are not 0x00 */ + if (e->c & 0x7FFF800L) { + if (e->zc) /* output final pending zero bytes */ + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte((e->c >> 19) & 0xFF, cinfo); + if (((e->c >> 19) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + if (e->c & 0x7F800L) { + emit_byte((e->c >> 11) & 0xFF, cinfo); + if (((e->c >> 11) & 0xFF) == 0xFF) + emit_byte(0x00, cinfo); + } + } +} + + +/* + * The core arithmetic encoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Parameter 'val' to be encoded may be 0 or 1 (binary decision). + * + * Note: I've added full "Pacman" termination support to the + * byte output routines, which is equivalent to the optional + * Discard_final_zeros procedure (Figure D.15) in the spec. + * Thus, we always produce the shortest possible output + * stream compliant to the spec (no trailing zero bytes, + * except for FF stuffing). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(void) +arith_encode (j_compress_ptr cinfo, unsigned char *st, int val) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv; + + /* Fetch values from our compact representation of Table D.2: + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Encode & estimation procedures per sections D.1.4 & D.1.5 */ + e->a -= qe; + if (val != (sv >> 7)) { + /* Encode the less probable symbol */ + if (e->a >= qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency, otherwise code the LPS + * as usual: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + } else { + /* Encode the more probable symbol */ + if (e->a >= 0x8000L) + return; /* A >= 0x8000 -> ready, no renormalization required */ + if (e->a < qe) { + /* If the interval size (qe) for the less probable symbol (LPS) + * is larger than the interval size for the MPS, then exchange + * the two symbols for coding efficiency: */ + e->c += e->a; + e->a = qe; + } + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + + /* Renormalization & data output per section D.1.6 */ + do { + e->a <<= 1; + e->c <<= 1; + if (--e->ct == 0) { + /* Another byte is ready for output */ + temp = e->c >> 19; + if (temp > 0xFF) { + /* Handle overflow over all stacked 0xFF bytes */ + if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer + 1, cinfo); + if (e->buffer + 1 == 0xFF) + emit_byte(0x00, cinfo); + } + e->zc += e->sc; /* carry-over converts stacked 0xFF bytes to 0x00 */ + e->sc = 0; + /* Note: The 3 spacer bits in the C register guarantee + * that the new buffer byte can't be 0xFF here + * (see page 160 in the P&M JPEG book). */ + e->buffer = temp & 0xFF; /* new output byte, might overflow later */ + } else if (temp == 0xFF) { + ++e->sc; /* stack 0xFF byte (which might overflow later) */ + } else { + /* Output all stacked 0xFF bytes, they will not overflow any more */ + if (e->buffer == 0) + ++e->zc; + else if (e->buffer >= 0) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + emit_byte(e->buffer, cinfo); + } + if (e->sc) { + if (e->zc) + do emit_byte(0x00, cinfo); + while (--e->zc); + do { + emit_byte(0xFF, cinfo); + emit_byte(0x00, cinfo); + } while (--e->sc); + } + e->buffer = temp & 0xFF; /* new output byte (can still overflow) */ + } + e->c &= 0x7FFFFL; + e->ct += 8; + } + } while (e->a < 0x8000L); +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(void) +emit_restart (j_compress_ptr cinfo, int restart_num) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + finish_pass(cinfo); + + emit_byte(0xFF, cinfo); + emit_byte(JPEG_RST0 + restart_num, cinfo); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl; + int v, v2, m; + ISHIFT_TEMPS + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + m = IRIGHT_SHIFT((int) ((*block)[0]), cinfo->Al); + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = m - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = m; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke; + int v, v2, m; + const int * natural_order; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + for (ke = cinfo->Se; ke > 0; ke--) + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = cinfo->Ss; k <= ke; k++) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[k]]) >= 0) { + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + break; + } + } + arith_encode(cinfo, st + 1, 0); st += 3; k++; + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k <= cinfo->Se */ + if (k <= cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int Al, blkn; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + Al = cinfo->Al; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* We simply emit the Al'th bit of the DC coefficient value. */ + arith_encode(cinfo, st, (MCU_data[blkn][0][0] >> Al) & 1); + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, k, ke, kex; + int v; + const int * natural_order; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Section G.1.3.3: Encoding of AC coefficients */ + + /* Establish EOB (end-of-block) index */ + for (ke = cinfo->Se; ke > 0; ke--) + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if ((v = (*block)[natural_order[ke]]) >= 0) { + if (v >>= cinfo->Al) break; + } else { + v = -v; + if (v >>= cinfo->Al) break; + } + + /* Establish EOBx (previous stage end-of-block) index */ + for (kex = ke; kex > 0; kex--) + if ((v = (*block)[natural_order[kex]]) >= 0) { + if (v >>= cinfo->Ah) break; + } else { + v = -v; + if (v >>= cinfo->Ah) break; + } + + /* Figure G.10: Encode_AC_Coefficients_SA */ + for (k = cinfo->Ss; k <= ke; k++) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + if (k > kex) + arith_encode(cinfo, st, 0); /* EOB decision */ + for (;;) { + if ((v = (*block)[natural_order[k]]) >= 0) { + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 0); + } + break; + } + } else { + v = -v; + if (v >>= cinfo->Al) { + if (v >> 1) /* previously nonzero coef */ + arith_encode(cinfo, st + 2, (v & 1)); + else { /* newly nonzero coef */ + arith_encode(cinfo, st + 1, 1); + arith_encode(cinfo, entropy->fixed_bin, 1); + } + break; + } + } + arith_encode(cinfo, st + 1, 0); st += 3; k++; + } + } + /* Encode EOB decision only if k <= cinfo->Se */ + if (k <= cinfo->Se) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + arith_encode(cinfo, st, 1); + } + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + jpeg_component_info * compptr; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, k, ke; + int v, v2, m; + const int * natural_order; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + emit_restart(cinfo, entropy->next_restart_num); + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + natural_order = cinfo->natural_order; + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.1.4.1 & F.1.4.4.1: Encoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.4: Encode_DC_DIFF */ + if ((v = (*block)[0] - entropy->last_dc_val[ci]) == 0) { + arith_encode(cinfo, st, 0); + entropy->dc_context[ci] = 0; /* zero diff category */ + } else { + entropy->last_dc_val[ci] = (*block)[0]; + arith_encode(cinfo, st, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, st + 1, 0); /* Table F.4: SS = S0 + 1 */ + st += 2; /* Table F.4: SP = S0 + 2 */ + entropy->dc_context[ci] = 4; /* small positive diff category */ + } else { + v = -v; + arith_encode(cinfo, st + 1, 1); /* Table F.4: SS = S0 + 1 */ + st += 3; /* Table F.4: SN = S0 + 3 */ + entropy->dc_context[ci] = 8; /* small negative diff category */ + } + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + arith_encode(cinfo, st, 0); + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] += 8; /* large diff category */ + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + + /* Sections F.1.4.2 & F.1.4.4.2: Encoding of AC coefficients */ + + tbl = compptr->ac_tbl_no; + + /* Establish EOB (end-of-block) index */ + for (ke = cinfo->lim_Se; ke > 0; ke--) + if ((*block)[natural_order[ke]]) break; + + /* Figure F.5: Encode_AC_Coefficients */ + for (k = 1; k <= ke; k++) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + arith_encode(cinfo, st, 0); /* EOB decision */ + while ((v = (*block)[natural_order[k]]) == 0) { + arith_encode(cinfo, st + 1, 0); st += 3; k++; + } + arith_encode(cinfo, st + 1, 1); + /* Figure F.6: Encoding nonzero value v */ + /* Figure F.7: Encoding the sign of v */ + if (v > 0) { + arith_encode(cinfo, entropy->fixed_bin, 0); + } else { + v = -v; + arith_encode(cinfo, entropy->fixed_bin, 1); + } + st += 2; + /* Figure F.8: Encoding the magnitude category of v */ + m = 0; + if (v -= 1) { + arith_encode(cinfo, st, 1); + m = 1; + v2 = v; + if (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (v2 >>= 1) { + arith_encode(cinfo, st, 1); + m <<= 1; + st += 1; + } + } + } + arith_encode(cinfo, st, 0); + /* Figure F.9: Encoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + arith_encode(cinfo, st, (m & v) ? 1 : 0); + } + /* Encode EOB decision only if k <= cinfo->lim_Se */ + if (k <= cinfo->lim_Se) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + arith_encode(cinfo, st, 1); + } + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_compress_ptr cinfo, boolean gather_statistics) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + /* Make sure to avoid that in the master control logic! + * We are fully adaptive here and need no extra + * statistics gathering pass! + */ + ERREXIT(cinfo, JERR_NOT_COMPILED); + + /* We assume jcmaster.c already validated the progressive scan parameters. */ + + /* Select execution routines */ + if (cinfo->progressive_mode) { + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else + entropy->pub.encode_mcu = encode_mcu_AC_refine; + } + } else + entropy->pub.encode_mcu = encode_mcu; + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); +#ifdef CALCULATE_SPECTRAL_CONDITIONING + if (cinfo->progressive_mode) + /* Section G.1.3.2: Set appropriate arithmetic conditioning value Kx */ + cinfo->arith_ac_K[tbl] = cinfo->Ss + ((8 + cinfo->Se - cinfo->Ss) >> 4); +#endif + } + } + + /* Initialize arithmetic encoding variables */ + entropy->c = 0; + entropy->a = 0x10000L; + entropy->sc = 0; + entropy->zc = 0; + entropy->ct = 11; + entropy->buffer = -1; /* empty */ + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for arithmetic entropy encoding. + */ + +GLOBAL(void) +jinit_arith_encoder (j_compress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(arith_entropy_encoder)); + cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; + entropy->pub.start_pass = start_pass; + entropy->pub.finish_pass = finish_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; +} diff --git a/src/3rdparty/libjpeg/jccoefct.c b/src/3rdparty/libjpeg/jccoefct.c new file mode 100644 index 0000000..d775313 --- /dev/null +++ b/src/3rdparty/libjpeg/jccoefct.c @@ -0,0 +1,453 @@ +/* + * jccoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for compression. + * This controller is the top level of the JPEG compressor proper. + * The coefficient buffer lies between forward-DCT and entropy encoding steps. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* We use a full-image coefficient buffer when doing Huffman optimization, + * and also for writing multiple-scan JPEG files. In all cases, the DCT + * step is run during the first pass, and subsequent passes need only read + * the buffered coefficients. + */ +#ifdef ENTROPY_OPT_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#else +#ifdef C_MULTISCAN_FILES_SUPPORTED +#define FULL_COEF_BUFFER_SUPPORTED +#endif +#endif + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* For single-pass compression, it's sufficient to buffer just one MCU + * (although this may prove a bit slow in practice). We allocate a + * workspace of C_MAX_BLOCKS_IN_MCU coefficient blocks, and reuse it for each + * MCU constructed and sent. (On 80x86, the workspace is FAR even though + * it's not really very big; this is to keep the module interfaces unchanged + * when a large coefficient buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays. + */ + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +/* Forward declarations */ +METHODDEF(boolean) compress_data + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#ifdef FULL_COEF_BUFFER_SUPPORTED +METHODDEF(boolean) compress_first_pass + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +METHODDEF(boolean) compress_output + JPP((j_compress_ptr cinfo, JSAMPIMAGE input_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (coef->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_data; + break; +#ifdef FULL_COEF_BUFFER_SUPPORTED + case JBUF_SAVE_AND_PASS: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_first_pass; + break; + case JBUF_CRANK_DEST: + if (coef->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + coef->pub.compress_data = compress_output; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data in the single-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(boolean) +compress_data (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, bi, ci, yindex, yoffset, blockcnt; + JDIMENSION ypos, xpos; + jpeg_component_info *compptr; + forward_DCT_ptr forward_DCT; + + /* Loop to write as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Determine where data comes from in input_buf and do the DCT thing. + * Each call on forward_DCT processes a horizontal row of DCT blocks + * as wide as an MCU; we rely on having allocated the MCU_buffer[] blocks + * sequentially. Dummy blocks at the right or bottom edge are filled in + * specially. The data in them does not matter for image reconstruction, + * so we fill them with values that will encode to the smallest amount of + * data, viz: all zeroes in the AC entries, DC entries equal to previous + * block's DC value. (Thanks to Thomas Kinsman for this idea.) + */ + blkn = 0; + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + forward_DCT = cinfo->fdct->forward_DCT[compptr->component_index]; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + xpos = MCU_col_num * compptr->MCU_sample_width; + ypos = yoffset * compptr->DCT_v_scaled_size; + /* ypos == (yoffset+yindex) * DCTSIZE */ + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + (*forward_DCT) (cinfo, compptr, + input_buf[compptr->component_index], + coef->MCU_buffer[blkn], + ypos, xpos, (JDIMENSION) blockcnt); + if (blockcnt < compptr->MCU_width) { + /* Create some dummy blocks at the right edge of the image. */ + jzero_far((void FAR *) coef->MCU_buffer[blkn + blockcnt], + (compptr->MCU_width - blockcnt) * SIZEOF(JBLOCK)); + for (bi = blockcnt; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn+bi-1][0][0]; + } + } + } else { + /* Create a row of dummy blocks at the bottom of the image. */ + jzero_far((void FAR *) coef->MCU_buffer[blkn], + compptr->MCU_width * SIZEOF(JBLOCK)); + for (bi = 0; bi < compptr->MCU_width; bi++) { + coef->MCU_buffer[blkn+bi][0][0] = coef->MCU_buffer[blkn-1][0][0]; + } + } + blkn += compptr->MCU_width; + ypos += compptr->DCT_v_scaled_size; + } + } + /* Try to write the MCU. In event of a suspension failure, we will + * re-DCT the MCU on restart (a bit inefficient, could be fixed...) + */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +#ifdef FULL_COEF_BUFFER_SUPPORTED + +/* + * Process some data in the first pass of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the image. + * This amount of data is read from the source buffer, DCT'd and quantized, + * and saved into the virtual arrays. We also generate suitable dummy blocks + * as needed at the right and lower edges. (The dummy blocks are constructed + * in the virtual arrays, which have been padded appropriately.) This makes + * it possible for subsequent passes not to worry about real vs. dummy blocks. + * + * We must also emit the data to the entropy encoder. This is conveniently + * done by calling compress_output() after we've loaded the current strip + * of the virtual arrays. + * + * NB: input_buf contains a plane for each component in image. All + * components are DCT'd and loaded into the virtual arrays in this pass. + * However, it may be that only a subset of the components are emitted to + * the entropy encoder during this first pass; be careful about looking + * at the scan-dependent variables (MCU dimensions, etc). + */ + +METHODDEF(boolean) +compress_first_pass (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION blocks_across, MCUs_across, MCUindex; + int bi, ci, h_samp_factor, block_row, block_rows, ndummy; + JCOEF lastDC; + jpeg_component_info *compptr; + JBLOCKARRAY buffer; + JBLOCKROW thisblockrow, lastblockrow; + forward_DCT_ptr forward_DCT; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (coef->iMCU_row_num < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here, since may not be set! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + blocks_across = compptr->width_in_blocks; + h_samp_factor = compptr->h_samp_factor; + /* Count number of dummy blocks to be added at the right margin. */ + ndummy = (int) (blocks_across % h_samp_factor); + if (ndummy > 0) + ndummy = h_samp_factor - ndummy; + forward_DCT = cinfo->fdct->forward_DCT[ci]; + /* Perform DCT for all non-dummy blocks in this iMCU row. Each call + * on forward_DCT processes a complete horizontal row of DCT blocks. + */ + for (block_row = 0; block_row < block_rows; block_row++) { + thisblockrow = buffer[block_row]; + (*forward_DCT) (cinfo, compptr, input_buf[ci], thisblockrow, + (JDIMENSION) (block_row * compptr->DCT_v_scaled_size), + (JDIMENSION) 0, blocks_across); + if (ndummy > 0) { + /* Create dummy blocks at the right edge of the image. */ + thisblockrow += blocks_across; /* => first dummy block */ + jzero_far((void FAR *) thisblockrow, ndummy * SIZEOF(JBLOCK)); + lastDC = thisblockrow[-1][0]; + for (bi = 0; bi < ndummy; bi++) { + thisblockrow[bi][0] = lastDC; + } + } + } + /* If at end of image, create dummy block rows as needed. + * The tricky part here is that within each MCU, we want the DC values + * of the dummy blocks to match the last real block's DC value. + * This squeezes a few more bytes out of the resulting file... + */ + if (coef->iMCU_row_num == last_iMCU_row) { + blocks_across += ndummy; /* include lower right corner */ + MCUs_across = blocks_across / h_samp_factor; + for (block_row = block_rows; block_row < compptr->v_samp_factor; + block_row++) { + thisblockrow = buffer[block_row]; + lastblockrow = buffer[block_row-1]; + jzero_far((void FAR *) thisblockrow, + (size_t) (blocks_across * SIZEOF(JBLOCK))); + for (MCUindex = 0; MCUindex < MCUs_across; MCUindex++) { + lastDC = lastblockrow[h_samp_factor-1][0]; + for (bi = 0; bi < h_samp_factor; bi++) { + thisblockrow[bi][0] = lastDC; + } + thisblockrow += h_samp_factor; /* advance to next MCU in row */ + lastblockrow += h_samp_factor; + } + } + } + } + /* NB: compress_output will increment iMCU_row_num if successful. + * A suspension return will result in redoing all the work above next time. + */ + + /* Emit data to the entropy encoder, sharing code with subsequent passes */ + return compress_output(cinfo, input_buf); +} + + +/* + * Process some data in subsequent passes of a multi-pass case. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. + * NB: during first pass, this is safe only because the buffers will + * already be aligned properly, so jmemmgr.c won't need to do any I/O. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + +#endif /* FULL_COEF_BUFFER_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_c_coef_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_c_coef_controller *) coef; + coef->pub.start_pass = start_pass_coef; + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef FULL_COEF_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + int ci; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) compptr->v_samp_factor); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->whole_image[0] = NULL; /* flag for no virtual arrays */ + } +} diff --git a/src/3rdparty/libjpeg/jccolor.c b/src/3rdparty/libjpeg/jccolor.c new file mode 100644 index 0000000..0a8a4b5 --- /dev/null +++ b/src/3rdparty/libjpeg/jccolor.c @@ -0,0 +1,459 @@ +/* + * jccolor.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_converter pub; /* public fields */ + + /* Private state for RGB->YCC conversion */ + INT32 * rgb_ycc_tab; /* => table for RGB to YCbCr conversion */ +} my_color_converter; + +typedef my_color_converter * my_cconvert_ptr; + + +/**************** RGB -> YCbCr conversion: most common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * Y = 0.29900 * R + 0.58700 * G + 0.11400 * B + * Cb = -0.16874 * R - 0.33126 * G + 0.50000 * B + CENTERJSAMPLE + * Cr = 0.50000 * R - 0.41869 * G - 0.08131 * B + CENTERJSAMPLE + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * Note: older versions of the IJG code used a zero offset of MAXJSAMPLE/2, + * rather than CENTERJSAMPLE, for Cb and Cr. This gave equal positive and + * negative swings for Cb/Cr, but meant that grayscale values (Cb=Cr=0) + * were not represented exactly. Now we sacrifice exact representation of + * maximum red and maximum blue in order to get exact grayscales. + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times R,G,B for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The CENTERJSAMPLE offsets and the rounding fudge-factor of 0.5 are included + * in the tables to save adding them separately in the inner loop. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define CBCR_OFFSET ((INT32) CENTERJSAMPLE << SCALEBITS) +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L< Y section */ +#define G_Y_OFF (1*(MAXJSAMPLE+1)) /* offset to G => Y section */ +#define B_Y_OFF (2*(MAXJSAMPLE+1)) /* etc. */ +#define R_CB_OFF (3*(MAXJSAMPLE+1)) +#define G_CB_OFF (4*(MAXJSAMPLE+1)) +#define B_CB_OFF (5*(MAXJSAMPLE+1)) +#define R_CR_OFF B_CB_OFF /* B=>Cb, R=>Cr are the same */ +#define G_CR_OFF (6*(MAXJSAMPLE+1)) +#define B_CR_OFF (7*(MAXJSAMPLE+1)) +#define TABLE_SIZE (8*(MAXJSAMPLE+1)) + + +/* + * Initialize for RGB->YCC colorspace conversion. + */ + +METHODDEF(void) +rgb_ycc_start (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + INT32 * rgb_ycc_tab; + INT32 i; + + /* Allocate and fill in the conversion tables. */ + cconvert->rgb_ycc_tab = rgb_ycc_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (TABLE_SIZE * SIZEOF(INT32))); + + for (i = 0; i <= MAXJSAMPLE; i++) { + rgb_ycc_tab[i+R_Y_OFF] = FIX(0.29900) * i; + rgb_ycc_tab[i+G_Y_OFF] = FIX(0.58700) * i; + rgb_ycc_tab[i+B_Y_OFF] = FIX(0.11400) * i + ONE_HALF; + rgb_ycc_tab[i+R_CB_OFF] = (-FIX(0.16874)) * i; + rgb_ycc_tab[i+G_CB_OFF] = (-FIX(0.33126)) * i; + /* We use a rounding fudge-factor of 0.5-epsilon for Cb and Cr. + * This ensures that the maximum output will round to MAXJSAMPLE + * not MAXJSAMPLE+1, and thus that we don't have to range-limit. + */ + rgb_ycc_tab[i+B_CB_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; +/* B=>Cb and R=>Cr tables are the same + rgb_ycc_tab[i+R_CR_OFF] = FIX(0.50000) * i + CBCR_OFFSET + ONE_HALF-1; +*/ + rgb_ycc_tab[i+G_CR_OFF] = (-FIX(0.41869)) * i; + rgb_ycc_tab[i+B_CR_OFF] = (-FIX(0.08131)) * i; + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * + * Note that we change from the application's interleaved-pixel format + * to our internal noninterleaved, one-plane-per-component format. + * The input buffer is therefore three times as wide as the output buffer. + * + * A starting row offset is provided only for the output buffer. The caller + * can easily adjust the passed input_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +rgb_ycc_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + inptr += RGB_PIXELSIZE; + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + } + } +} + + +/**************** Cases other than RGB -> YCbCr **************/ + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles RGB->grayscale conversion, which is the same + * as the RGB->Y portion of RGB->YCbCr. + * We assume rgb_ycc_start has been called (we only use the Y tables). + */ + +METHODDEF(void) +rgb_gray_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = GETJSAMPLE(inptr[RGB_RED]); + g = GETJSAMPLE(inptr[RGB_GREEN]); + b = GETJSAMPLE(inptr[RGB_BLUE]); + inptr += RGB_PIXELSIZE; + /* Y */ + outptr[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles Adobe-style CMYK->YCCK conversion, + * where we convert R=1-C, G=1-M, and B=1-Y to YCbCr using the same + * conversion as above, while passing K (black) unchanged. + * We assume rgb_ycc_start has been called. + */ + +METHODDEF(void) +cmyk_ycck_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int r, g, b; + register INT32 * ctab = cconvert->rgb_ycc_tab; + register JSAMPROW inptr; + register JSAMPROW outptr0, outptr1, outptr2, outptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr0 = output_buf[0][output_row]; + outptr1 = output_buf[1][output_row]; + outptr2 = output_buf[2][output_row]; + outptr3 = output_buf[3][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + r = MAXJSAMPLE - GETJSAMPLE(inptr[0]); + g = MAXJSAMPLE - GETJSAMPLE(inptr[1]); + b = MAXJSAMPLE - GETJSAMPLE(inptr[2]); + /* K passes through as-is */ + outptr3[col] = inptr[3]; /* don't need GETJSAMPLE here */ + inptr += 4; + /* If the inputs are 0..MAXJSAMPLE, the outputs of these equations + * must be too; we do not need an explicit range-limiting operation. + * Hence the value being shifted is never negative, and we don't + * need the general RIGHT_SHIFT macro. + */ + /* Y */ + outptr0[col] = (JSAMPLE) + ((ctab[r+R_Y_OFF] + ctab[g+G_Y_OFF] + ctab[b+B_Y_OFF]) + >> SCALEBITS); + /* Cb */ + outptr1[col] = (JSAMPLE) + ((ctab[r+R_CB_OFF] + ctab[g+G_CB_OFF] + ctab[b+B_CB_OFF]) + >> SCALEBITS); + /* Cr */ + outptr2[col] = (JSAMPLE) + ((ctab[r+R_CR_OFF] + ctab[g+G_CR_OFF] + ctab[b+B_CR_OFF]) + >> SCALEBITS); + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles grayscale output with no conversion. + * The source can be either plain grayscale or YCbCr (since Y == gray). + */ + +METHODDEF(void) +grayscale_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->image_width; + int instride = cinfo->input_components; + + while (--num_rows >= 0) { + inptr = *input_buf++; + outptr = output_buf[0][output_row]; + output_row++; + for (col = 0; col < num_cols; col++) { + outptr[col] = inptr[0]; /* don't need GETJSAMPLE() here */ + inptr += instride; + } + } +} + + +/* + * Convert some rows of samples to the JPEG colorspace. + * This version handles multi-component colorspaces without conversion. + * We assume input_components == num_components. + */ + +METHODDEF(void) +null_convert (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows) +{ + register JSAMPROW inptr; + register JSAMPROW outptr; + register JDIMENSION col; + register int ci; + int nc = cinfo->num_components; + JDIMENSION num_cols = cinfo->image_width; + + while (--num_rows >= 0) { + /* It seems fastest to make a separate pass for each component. */ + for (ci = 0; ci < nc; ci++) { + inptr = *input_buf; + outptr = output_buf[ci][output_row]; + for (col = 0; col < num_cols; col++) { + outptr[col] = inptr[ci]; /* don't need GETJSAMPLE() here */ + inptr += nc; + } + } + input_buf++; + output_row++; + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +null_method (j_compress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for input colorspace conversion. + */ + +GLOBAL(void) +jinit_color_converter (j_compress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_converter)); + cinfo->cconvert = (struct jpeg_color_converter *) cconvert; + /* set start_pass to null method until we find out differently */ + cconvert->pub.start_pass = null_method; + + /* Make sure input_components agrees with in_color_space */ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + if (cinfo->input_components != 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_RGB: +#if RGB_PIXELSIZE != 3 + if (cinfo->input_components != RGB_PIXELSIZE) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; +#endif /* else share code with YCbCr */ + + case JCS_YCbCr: + if (cinfo->input_components != 3) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->input_components != 4) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->input_components < 1) + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + break; + } + + /* Check num_components, set conversion method based on requested space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_GRAYSCALE) + cconvert->pub.color_convert = grayscale_convert; + else if (cinfo->in_color_space == JCS_RGB) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_gray_convert; + } else if (cinfo->in_color_space == JCS_YCbCr) + cconvert->pub.color_convert = grayscale_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_RGB && RGB_PIXELSIZE == 3) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_RGB) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = rgb_ycc_convert; + } else if (cinfo->in_color_space == JCS_YCbCr) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + if (cinfo->in_color_space == JCS_CMYK) { + cconvert->pub.start_pass = rgb_ycc_start; + cconvert->pub.color_convert = cmyk_ycck_convert; + } else if (cinfo->in_color_space == JCS_YCCK) + cconvert->pub.color_convert = null_convert; + else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: /* allow null conversion of JCS_UNKNOWN */ + if (cinfo->jpeg_color_space != cinfo->in_color_space || + cinfo->num_components != cinfo->input_components) + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + cconvert->pub.color_convert = null_convert; + break; + } +} diff --git a/src/3rdparty/libjpeg/jcdctmgr.c b/src/3rdparty/libjpeg/jcdctmgr.c new file mode 100644 index 0000000..0bbdbb6 --- /dev/null +++ b/src/3rdparty/libjpeg/jcdctmgr.c @@ -0,0 +1,482 @@ +/* + * jcdctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the forward-DCT management logic. + * This code selects a particular DCT implementation to be used, + * and it performs related housekeeping chores including coefficient + * quantization. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_forward_dct pub; /* public fields */ + + /* Pointer to the DCT routine actually in use */ + forward_DCT_method_ptr do_dct[MAX_COMPONENTS]; + + /* The actual post-DCT divisors --- not identical to the quant table + * entries, because of scaling (especially for an unnormalized DCT). + * Each table is given in normal array order. + */ + DCTELEM * divisors[NUM_QUANT_TBLS]; + +#ifdef DCT_FLOAT_SUPPORTED + /* Same as above for the floating-point case. */ + float_DCT_method_ptr do_float_dct[MAX_COMPONENTS]; + FAST_FLOAT * float_divisors[NUM_QUANT_TBLS]; +#endif +} my_fdct_controller; + +typedef my_fdct_controller * my_fdct_ptr; + + +/* The current scaled-DCT routines require ISLOW-style divisor tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef DCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Perform forward DCT on one or more blocks of a component. + * + * The input samples are taken from the sample_data[] array starting at + * position start_row/start_col, and moving to the right for any additional + * blocks. The quantized coefficients are returned in coef_blocks[]. + */ + +METHODDEF(void) +forward_DCT (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for integer DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + forward_DCT_method_ptr do_dct = fdct->do_dct[compptr->component_index]; + DCTELEM * divisors = fdct->divisors[compptr->quant_tbl_no]; + DCTELEM workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { + /* Perform the DCT */ + (*do_dct) (workspace, sample_data, start_col); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register DCTELEM temp, qval; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + qval = divisors[i]; + temp = workspace[i]; + /* Divide the coefficient value by qval, ensuring proper rounding. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * + * In most files, at least half of the output values will be zero + * (at default quantization settings, more like three-quarters...) + * so we should ensure that this case is fast. On many machines, + * a comparison is enough cheaper than a divide to make a special test + * a win. Since both inputs will be nonnegative, we need only test + * for a < b to discover whether a/b is 0. + * If your machine's division is fast enough, define FAST_DIVIDE. + */ +#ifdef FAST_DIVIDE +#define DIVIDE_BY(a,b) a /= b +#else +#define DIVIDE_BY(a,b) if (a >= b) a /= b; else a = 0 +#endif + if (temp < 0) { + temp = -temp; + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + temp = -temp; + } else { + temp += qval>>1; /* for rounding */ + DIVIDE_BY(temp, qval); + } + output_ptr[i] = (JCOEF) temp; + } + } + } +} + + +#ifdef DCT_FLOAT_SUPPORTED + +METHODDEF(void) +forward_DCT_float (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks) +/* This version is used for floating-point DCT implementations. */ +{ + /* This routine is heavily used, so it's worth coding it tightly. */ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + float_DCT_method_ptr do_dct = fdct->do_float_dct[compptr->component_index]; + FAST_FLOAT * divisors = fdct->float_divisors[compptr->quant_tbl_no]; + FAST_FLOAT workspace[DCTSIZE2]; /* work area for FDCT subroutine */ + JDIMENSION bi; + + sample_data += start_row; /* fold in the vertical offset once */ + + for (bi = 0; bi < num_blocks; bi++, start_col += compptr->DCT_h_scaled_size) { + /* Perform the DCT */ + (*do_dct) (workspace, sample_data, start_col); + + /* Quantize/descale the coefficients, and store into coef_blocks[] */ + { register FAST_FLOAT temp; + register int i; + register JCOEFPTR output_ptr = coef_blocks[bi]; + + for (i = 0; i < DCTSIZE2; i++) { + /* Apply the quantization and scaling factor */ + temp = workspace[i] * divisors[i]; + /* Round to nearest integer. + * Since C does not specify the direction of rounding for negative + * quotients, we have to force the dividend positive for portability. + * The maximum coefficient size is +-16K (for 12-bit data), so this + * code should work for either 16-bit or 32-bit ints. + */ + output_ptr[i] = (JCOEF) ((int) (temp + (FAST_FLOAT) 16384.5) - 16384); + } + } + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ + + +/* + * Initialize for a processing pass. + * Verify that all referenced Q-tables are present, and set up + * the divisor table for each one. + * In the current implementation, DCT of all components is done during + * the first pass, even if only some components will be output in the + * first scan. Hence all components should be examined here. + */ + +METHODDEF(void) +start_pass_fdctmgr (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct = (my_fdct_ptr) cinfo->fdct; + int ci, qtblno, i; + jpeg_component_info *compptr; + int method = 0; + JQUANT_TBL * qtbl; + DCTELEM * dtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper DCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef DCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_1x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_2x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_3x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_4x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_5x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_6x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_7x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((9 << 8) + 9): + fdct->do_dct[ci] = jpeg_fdct_9x9; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_10x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((11 << 8) + 11): + fdct->do_dct[ci] = jpeg_fdct_11x11; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_12x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((13 << 8) + 13): + fdct->do_dct[ci] = jpeg_fdct_13x13; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_14x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((15 << 8) + 15): + fdct->do_dct[ci] = jpeg_fdct_15x15; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_16x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((16 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_16x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((14 << 8) + 7): + fdct->do_dct[ci] = jpeg_fdct_14x7; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((12 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_12x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((10 << 8) + 5): + fdct->do_dct[ci] = jpeg_fdct_10x5; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_8x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 3): + fdct->do_dct[ci] = jpeg_fdct_6x3; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_4x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 1): + fdct->do_dct[ci] = jpeg_fdct_2x1; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((8 << 8) + 16): + fdct->do_dct[ci] = jpeg_fdct_8x16; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((7 << 8) + 14): + fdct->do_dct[ci] = jpeg_fdct_7x14; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((6 << 8) + 12): + fdct->do_dct[ci] = jpeg_fdct_6x12; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((5 << 8) + 10): + fdct->do_dct[ci] = jpeg_fdct_5x10; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((4 << 8) + 8): + fdct->do_dct[ci] = jpeg_fdct_4x8; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((3 << 8) + 6): + fdct->do_dct[ci] = jpeg_fdct_3x6; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((2 << 8) + 4): + fdct->do_dct[ci] = jpeg_fdct_2x4; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; + case ((1 << 8) + 2): + fdct->do_dct[ci] = jpeg_fdct_1x2; + method = JDCT_ISLOW; /* jfdctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + fdct->do_dct[ci] = jpeg_fdct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + fdct->do_dct[ci] = jpeg_fdct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + fdct->do_float_dct[ci] = jpeg_fdct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + qtblno = compptr->quant_tbl_no; + /* Make sure specified quantization table is present */ + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + qtbl = cinfo->quant_tbl_ptrs[qtblno]; + /* Compute divisors for this quant table */ + /* We may do this more than once for same table, but it's not a big deal */ + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + /* For LL&M IDCT method, divisors are equal to raw quantization + * coefficients multiplied by 8 (to counteract scaling). + */ + if (fdct->divisors[qtblno] == NULL) { + fdct->divisors[qtblno] = (DCTELEM *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(DCTELEM)); + } + dtbl = fdct->divisors[qtblno]; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = ((DCTELEM) qtbl->quantval[i]) << 3; + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + */ +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + if (fdct->divisors[qtblno] == NULL) { + fdct->divisors[qtblno] = (DCTELEM *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(DCTELEM)); + } + dtbl = fdct->divisors[qtblno]; + for (i = 0; i < DCTSIZE2; i++) { + dtbl[i] = (DCTELEM) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-3); + } + } + fdct->pub.forward_DCT[ci] = forward_DCT; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, divisors are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * We apply a further scale factor of 8. + * What's actually stored is 1/divisor so that the inner loop can + * use a multiplication rather than a division. + */ + FAST_FLOAT * fdtbl; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + if (fdct->float_divisors[qtblno] == NULL) { + fdct->float_divisors[qtblno] = (FAST_FLOAT *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + DCTSIZE2 * SIZEOF(FAST_FLOAT)); + } + fdtbl = fdct->float_divisors[qtblno]; + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fdtbl[i] = (FAST_FLOAT) + (1.0 / (((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col] * 8.0))); + i++; + } + } + } + fdct->pub.forward_DCT[ci] = forward_DCT_float; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize FDCT manager. + */ + +GLOBAL(void) +jinit_forward_dct (j_compress_ptr cinfo) +{ + my_fdct_ptr fdct; + int i; + + fdct = (my_fdct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_fdct_controller)); + cinfo->fdct = (struct jpeg_forward_dct *) fdct; + fdct->pub.start_pass = start_pass_fdctmgr; + + /* Mark divisor tables unallocated */ + for (i = 0; i < NUM_QUANT_TBLS; i++) { + fdct->divisors[i] = NULL; +#ifdef DCT_FLOAT_SUPPORTED + fdct->float_divisors[i] = NULL; +#endif + } +} diff --git a/src/3rdparty/libjpeg/jchuff.c b/src/3rdparty/libjpeg/jchuff.c new file mode 100644 index 0000000..257d7aa --- /dev/null +++ b/src/3rdparty/libjpeg/jchuff.c @@ -0,0 +1,1576 @@ +/* + * jchuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy encoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting output suspension. + * If the data destination module demands suspension, we want to be able to + * back up to the start of the current MCU. To do this, we copy state + * variables into local working storage, and update them back to the + * permanent JPEG objects only upon successful completion of an MCU. + * + * We do not support output suspension for the progressive JPEG mode, since + * the library currently does not allow multiple-scan files to be written + * with output suspension. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* The legal range of a DCT coefficient is + * -1024 .. +1023 for 8-bit data; + * -16384 .. +16383 for 12-bit data. + * Hence the magnitude should always fit in 10 or 14 bits respectively. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MAX_COEF_BITS 10 +#else +#define MAX_COEF_BITS 14 +#endif + +/* Derived data constructed for each Huffman table */ + +typedef struct { + unsigned int ehufco[256]; /* code for each symbol */ + char ehufsi[256]; /* length of code for each symbol */ + /* If no code has been allocated for a symbol S, ehufsi[S] contains 0 */ +} c_derived_tbl; + + +/* Expanded entropy encoder object for Huffman encoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + INT32 put_buffer; /* current bit-accumulation buffer */ + int put_bits; /* # of bits now in it */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).put_buffer = (src).put_buffer, \ + (dest).put_bits = (src).put_bits, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_encoder pub; /* public fields */ + + savable_state saved; /* Bit buffer & DC state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + int next_restart_num; /* next restart number to write (0-7) */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + c_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + c_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Statistics tables for optimization */ + long * dc_count_ptrs[NUM_HUFF_TBLS]; + long * ac_count_ptrs[NUM_HUFF_TBLS]; + + /* Following fields used only in progressive mode */ + + /* Mode flag: TRUE for optimization, FALSE for actual data output */ + boolean gather_statistics; + + /* next_output_byte/free_in_buffer are local copies of cinfo->dest fields. + */ + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + j_compress_ptr cinfo; /* link to cinfo (needed for dump_buffer) */ + + /* Coding status for AC components */ + int ac_tbl_no; /* the table number of the single component */ + unsigned int EOBRUN; /* run length of EOBs */ + unsigned int BE; /* # of buffered correction bits before MCU */ + char * bit_buffer; /* buffer for correction bits (1 per char) */ + /* packing correction bits tightly would save some space but cost time... */ +} huff_entropy_encoder; + +typedef huff_entropy_encoder * huff_entropy_ptr; + +/* Working state while writing an MCU (sequential mode). + * This struct contains all the fields that are needed by subroutines. + */ + +typedef struct { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + savable_state cur; /* Current bit buffer & DC state */ + j_compress_ptr cinfo; /* dump_buffer needs access to this */ +} working_state; + +/* MAX_CORR_BITS is the number of bits the AC refinement correction-bit + * buffer can hold. Larger sizes may slightly improve compression, but + * 1000 is already well into the realm of overkill. + * The minimum safe size is 64 bits. + */ + +#define MAX_CORR_BITS 1000 /* Max # of correction bits I can buffer */ + +/* IRIGHT_SHIFT is like RIGHT_SHIFT, but works on int rather than INT32. + * We assume that int right shift is unsigned if INT32 right shift is, + * which should be safe. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS int ishift_temp; +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~0) << (16-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_c_derived_tbl (j_compress_ptr cinfo, boolean isDC, int tblno, + c_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + c_derived_tbl *dtbl; + int p, i, l, lastp, si, maxsymbol; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (c_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(c_derived_tbl)); + dtbl = *pdtbl; + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + lastp = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure C.3: generate encoding tables */ + /* These are code and size indexed by symbol value */ + + /* Set all codeless symbols to have code length 0; + * this lets us detect duplicate VAL entries here, and later + * allows emit_bits to detect any attempt to emit such symbols. + */ + MEMZERO(dtbl->ehufsi, SIZEOF(dtbl->ehufsi)); + + /* This is also a convenient place to check for out-of-range + * and duplicated VAL entries. We allow 0..255 for AC symbols + * but only 0..15 for DC. (We could constrain them further + * based on data depth and mode, but this seems enough.) + */ + maxsymbol = isDC ? 15 : 255; + + for (p = 0; p < lastp; p++) { + i = htbl->huffval[p]; + if (i < 0 || i > maxsymbol || dtbl->ehufsi[i]) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + dtbl->ehufco[i] = huffcode[p]; + dtbl->ehufsi[i] = huffsize[p]; + } +} + + +/* Outputting bytes to the file. + * NB: these must be called only when actually outputting, + * that is, entropy->gather_statistics == FALSE. + */ + +/* Emit a byte, taking 'action' if must suspend. */ +#define emit_byte_s(state,val,action) \ + { *(state)->next_output_byte++ = (JOCTET) (val); \ + if (--(state)->free_in_buffer == 0) \ + if (! dump_buffer_s(state)) \ + { action; } } + +/* Emit a byte */ +#define emit_byte_e(entropy,val) \ + { *(entropy)->next_output_byte++ = (JOCTET) (val); \ + if (--(entropy)->free_in_buffer == 0) \ + dump_buffer_e(entropy); } + + +LOCAL(boolean) +dump_buffer_s (working_state * state) +/* Empty the output buffer; return TRUE if successful, FALSE if must suspend */ +{ + struct jpeg_destination_mgr * dest = state->cinfo->dest; + + if (! (*dest->empty_output_buffer) (state->cinfo)) + return FALSE; + /* After a successful buffer dump, must reset buffer pointers */ + state->next_output_byte = dest->next_output_byte; + state->free_in_buffer = dest->free_in_buffer; + return TRUE; +} + + +LOCAL(void) +dump_buffer_e (huff_entropy_ptr entropy) +/* Empty the output buffer; we do not support suspension in this case. */ +{ + struct jpeg_destination_mgr * dest = entropy->cinfo->dest; + + if (! (*dest->empty_output_buffer) (entropy->cinfo)) + ERREXIT(entropy->cinfo, JERR_CANT_SUSPEND); + /* After a successful buffer dump, must reset buffer pointers */ + entropy->next_output_byte = dest->next_output_byte; + entropy->free_in_buffer = dest->free_in_buffer; +} + + +/* Outputting bits to the file */ + +/* Only the right 24 bits of put_buffer are used; the valid bits are + * left-justified in this part. At most 16 bits can be passed to emit_bits + * in one call, and we never retain more than 7 bits in put_buffer + * between calls, so 24 bits are sufficient. + */ + +INLINE +LOCAL(boolean) +emit_bits_s (working_state * state, unsigned int code, int size) +/* Emit some bits; return TRUE if successful, FALSE if must suspend */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer = (INT32) code; + register int put_bits = state->cur.put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(state->cinfo, JERR_HUFF_MISSING_CODE); + + put_buffer &= (((INT32) 1)<cur.put_buffer; /* and merge with old buffer contents */ + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_s(state, c, return FALSE); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_s(state, 0, return FALSE); + } + put_buffer <<= 8; + put_bits -= 8; + } + + state->cur.put_buffer = put_buffer; /* update state variables */ + state->cur.put_bits = put_bits; + + return TRUE; +} + + +INLINE +LOCAL(void) +emit_bits_e (huff_entropy_ptr entropy, unsigned int code, int size) +/* Emit some bits, unless we are in gather mode */ +{ + /* This routine is heavily used, so it's worth coding tightly. */ + register INT32 put_buffer = (INT32) code; + register int put_bits = entropy->saved.put_bits; + + /* if size is 0, caller used an invalid Huffman table entry */ + if (size == 0) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + if (entropy->gather_statistics) + return; /* do nothing if we're only getting stats */ + + put_buffer &= (((INT32) 1)<saved.put_buffer; + + while (put_bits >= 8) { + int c = (int) ((put_buffer >> 16) & 0xFF); + + emit_byte_e(entropy, c); + if (c == 0xFF) { /* need to stuff a zero byte? */ + emit_byte_e(entropy, 0); + } + put_buffer <<= 8; + put_bits -= 8; + } + + entropy->saved.put_buffer = put_buffer; /* update variables */ + entropy->saved.put_bits = put_bits; +} + + +LOCAL(boolean) +flush_bits_s (working_state * state) +{ + if (! emit_bits_s(state, 0x7F, 7)) /* fill any partial byte with ones */ + return FALSE; + state->cur.put_buffer = 0; /* and reset bit-buffer to empty */ + state->cur.put_bits = 0; + return TRUE; +} + + +LOCAL(void) +flush_bits_e (huff_entropy_ptr entropy) +{ + emit_bits_e(entropy, 0x7F, 7); /* fill any partial byte with ones */ + entropy->saved.put_buffer = 0; /* and reset bit-buffer to empty */ + entropy->saved.put_bits = 0; +} + + +/* + * Emit (or just count) a Huffman symbol. + */ + +INLINE +LOCAL(void) +emit_dc_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->dc_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->dc_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +INLINE +LOCAL(void) +emit_ac_symbol (huff_entropy_ptr entropy, int tbl_no, int symbol) +{ + if (entropy->gather_statistics) + entropy->ac_count_ptrs[tbl_no][symbol]++; + else { + c_derived_tbl * tbl = entropy->ac_derived_tbls[tbl_no]; + emit_bits_e(entropy, tbl->ehufco[symbol], tbl->ehufsi[symbol]); + } +} + + +/* + * Emit bits from a correction bit buffer. + */ + +LOCAL(void) +emit_buffered_bits (huff_entropy_ptr entropy, char * bufstart, + unsigned int nbits) +{ + if (entropy->gather_statistics) + return; /* no real work */ + + while (nbits > 0) { + emit_bits_e(entropy, (unsigned int) (*bufstart), 1); + bufstart++; + nbits--; + } +} + + +/* + * Emit any pending EOBRUN symbol. + */ + +LOCAL(void) +emit_eobrun (huff_entropy_ptr entropy) +{ + register int temp, nbits; + + if (entropy->EOBRUN > 0) { /* if there is any pending EOBRUN */ + temp = entropy->EOBRUN; + nbits = 0; + while ((temp >>= 1)) + nbits++; + /* safety check: shouldn't happen given limited correction-bit buffer */ + if (nbits > 14) + ERREXIT(entropy->cinfo, JERR_HUFF_MISSING_CODE); + + emit_ac_symbol(entropy, entropy->ac_tbl_no, nbits << 4); + if (nbits) + emit_bits_e(entropy, entropy->EOBRUN, nbits); + + entropy->EOBRUN = 0; + + /* Emit any buffered correction bits */ + emit_buffered_bits(entropy, entropy->bit_buffer, entropy->BE); + entropy->BE = 0; + } +} + + +/* + * Emit a restart marker & resynchronize predictions. + */ + +LOCAL(boolean) +emit_restart_s (working_state * state, int restart_num) +{ + int ci; + + if (! flush_bits_s(state)) + return FALSE; + + emit_byte_s(state, 0xFF, return FALSE); + emit_byte_s(state, JPEG_RST0 + restart_num, return FALSE); + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < state->cinfo->comps_in_scan; ci++) + state->cur.last_dc_val[ci] = 0; + + /* The restart counter is not updated until we successfully write the MCU. */ + + return TRUE; +} + + +LOCAL(void) +emit_restart_e (huff_entropy_ptr entropy, int restart_num) +{ + int ci; + + emit_eobrun(entropy); + + if (! entropy->gather_statistics) { + flush_bits_e(entropy); + emit_byte_e(entropy, 0xFF); + emit_byte_e(entropy, JPEG_RST0 + restart_num); + } + + if (entropy->cinfo->Ss == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < entropy->cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + } else { + /* Re-initialize all AC-related fields to 0 */ + entropy->EOBRUN = 0; + entropy->BE = 0; + } +} + + +/* + * MCU encoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_DC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + int blkn, ci; + int Al = cinfo->Al; + JBLOCKROW block; + jpeg_component_info * compptr; + ISHIFT_TEMPS + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Compute the DC value after the required point transform by Al. + * This is simply an arithmetic right shift. + */ + temp2 = IRIGHT_SHIFT((int) ((*block)[0]), Al); + + /* DC differences are figured on the point-transformed values. */ + temp = temp2 - entropy->saved.last_dc_val[ci]; + entropy->saved.last_dc_val[ci] = temp2; + + /* Encode the DC coefficient difference per section G.1.2.1 */ + temp2 = temp; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit the Huffman-coded symbol for the number of bits */ + emit_dc_symbol(entropy, compptr->dc_tbl_no, nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +encode_mcu_AC_first (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp, temp2; + register int nbits; + register int r, k; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* Encode the AC coefficients per section G.1.2.2, fig. G.3 */ + + r = 0; /* r = run length of zeros */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = (*block)[natural_order[k]]) == 0) { + r++; + continue; + } + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value; so the code is + * interwoven with finding the abs value (temp) and output bits (temp2). + */ + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + /* For a negative coef, want temp2 = bitwise complement of abs(coef) */ + temp2 = ~temp; + } else { + temp >>= Al; /* apply the point transform */ + temp2 = temp; + } + /* Watch out for case that nonzero coef is zero after point transform */ + if (temp == 0) { + r++; + continue; + } + + /* Emit any pending EOBRUN */ + if (entropy->EOBRUN > 0) + emit_eobrun(entropy); + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + nbits); + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + emit_bits_e(entropy, (unsigned int) temp2, nbits); + + r = 0; /* reset zero run length */ + } + + if (r > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + if (entropy->EOBRUN == 0x7FFF) + emit_eobrun(entropy); /* force it out to avoid overflow */ + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +encode_mcu_DC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp; + int blkn; + int Al = cinfo->Al; + JBLOCKROW block; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* We simply emit the Al'th bit of the DC coefficient value. */ + temp = (*block)[0]; + emit_bits_e(entropy, (unsigned int) (temp >> Al), 1); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * MCU encoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +encode_mcu_AC_refine (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int temp; + register int r, k; + int EOB; + char *BR_buffer; + unsigned int BR; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + int absvalues[DCTSIZE2]; + + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) + if (entropy->restarts_to_go == 0) + emit_restart_e(entropy, entropy->next_restart_num); + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Encode the MCU data block */ + block = MCU_data[0]; + + /* It is convenient to make a pre-pass to determine the transformed + * coefficients' absolute values and the EOB position. + */ + EOB = 0; + for (k = cinfo->Ss; k <= Se; k++) { + temp = (*block)[natural_order[k]]; + /* We must apply the point transform by Al. For AC coefficients this + * is an integer division with rounding towards 0. To do this portably + * in C, we shift after obtaining the absolute value. + */ + if (temp < 0) + temp = -temp; /* temp is abs value of input */ + temp >>= Al; /* apply the point transform */ + absvalues[k] = temp; /* save abs value for main pass */ + if (temp == 1) + EOB = k; /* EOB = index of last newly-nonzero coef */ + } + + /* Encode the AC coefficients per section G.1.2.3, fig. G.7 */ + + r = 0; /* r = run length of zeros */ + BR = 0; /* BR = count of buffered bits added now */ + BR_buffer = entropy->bit_buffer + entropy->BE; /* Append bits to buffer */ + + for (k = cinfo->Ss; k <= Se; k++) { + if ((temp = absvalues[k]) == 0) { + r++; + continue; + } + + /* Emit any required ZRLs, but not if they can be folded into EOB */ + while (r > 15 && k <= EOB) { + /* emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + /* Emit ZRL */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, 0xF0); + r -= 16; + /* Emit buffered correction bits that must be associated with ZRL */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + } + + /* If the coef was previously nonzero, it only needs a correction bit. + * NOTE: a straight translation of the spec's figure G.7 would suggest + * that we also need to test r > 15. But if r > 15, we can only get here + * if k > EOB, which implies that this coefficient is not 1. + */ + if (temp > 1) { + /* The correction bit is the next bit of the absolute value. */ + BR_buffer[BR++] = (char) (temp & 1); + continue; + } + + /* Emit any pending EOBRUN and the BE correction bits */ + emit_eobrun(entropy); + + /* Count/emit Huffman symbol for run length / number of bits */ + emit_ac_symbol(entropy, entropy->ac_tbl_no, (r << 4) + 1); + + /* Emit output bit for newly-nonzero coef */ + temp = ((*block)[natural_order[k]] < 0) ? 0 : 1; + emit_bits_e(entropy, (unsigned int) temp, 1); + + /* Emit buffered correction bits that must be associated with this code */ + emit_buffered_bits(entropy, BR_buffer, BR); + BR_buffer = entropy->bit_buffer; /* BE bits are gone now */ + BR = 0; + r = 0; /* reset zero run length */ + } + + if (r > 0 || BR > 0) { /* If there are trailing zeroes, */ + entropy->EOBRUN++; /* count an EOB */ + entropy->BE += BR; /* concat my correction bits to older ones */ + /* We force out the EOB if we risk either: + * 1. overflow of the EOB counter; + * 2. overflow of the correction bit buffer during the next MCU. + */ + if (entropy->EOBRUN == 0x7FFF || entropy->BE > (MAX_CORR_BITS-DCTSIZE2+1)) + emit_eobrun(entropy); + } + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* Encode a single block's worth of coefficients */ + +LOCAL(boolean) +encode_one_block (working_state * state, JCOEFPTR block, int last_dc_val, + c_derived_tbl *dctbl, c_derived_tbl *actbl) +{ + register int temp, temp2; + register int nbits; + register int k, r, i; + int Se = state->cinfo->lim_Se; + const int * natural_order = state->cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = temp2 = block[0] - last_dc_val; + + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* For a negative input, want temp2 = bitwise complement of abs(input) */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit the Huffman-coded symbol for the number of bits */ + if (! emit_bits_s(state, dctbl->ehufco[nbits], dctbl->ehufsi[nbits])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (nbits) /* emit_bits rejects calls with size 0 */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + if (! emit_bits_s(state, actbl->ehufco[0xF0], actbl->ehufsi[0xF0])) + return FALSE; + r -= 16; + } + + temp2 = temp; + if (temp < 0) { + temp = -temp; /* temp is abs value of input */ + /* This code assumes we are on a two's complement machine */ + temp2--; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(state->cinfo, JERR_BAD_DCT_COEF); + + /* Emit Huffman symbol for run length / number of bits */ + i = (r << 4) + nbits; + if (! emit_bits_s(state, actbl->ehufco[i], actbl->ehufsi[i])) + return FALSE; + + /* Emit that number of bits of the value, if positive, */ + /* or the complement of its magnitude, if negative. */ + if (! emit_bits_s(state, (unsigned int) temp2, nbits)) + return FALSE; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + if (! emit_bits_s(state, actbl->ehufco[0], actbl->ehufsi[0])) + return FALSE; + + return TRUE; +} + + +/* + * Encode and output one MCU's worth of Huffman-compressed coefficients. + */ + +METHODDEF(boolean) +encode_mcu_huff (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + int blkn, ci; + jpeg_component_info * compptr; + + /* Load up working state */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Emit restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! emit_restart_s(&state, entropy->next_restart_num)) + return FALSE; + } + + /* Encode the MCU data blocks */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + if (! encode_one_block(&state, + MCU_data[blkn][0], state.cur.last_dc_val[ci], + entropy->dc_derived_tbls[compptr->dc_tbl_no], + entropy->ac_derived_tbls[compptr->ac_tbl_no])) + return FALSE; + /* Update last_dc_val */ + state.cur.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + /* Completed MCU, so update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + + /* Update restart-interval state too */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num++; + entropy->next_restart_num &= 7; + } + entropy->restarts_to_go--; + } + + return TRUE; +} + + +/* + * Finish up at the end of a Huffman-compressed scan. + */ + +METHODDEF(void) +finish_pass_huff (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + working_state state; + + if (cinfo->progressive_mode) { + entropy->next_output_byte = cinfo->dest->next_output_byte; + entropy->free_in_buffer = cinfo->dest->free_in_buffer; + + /* Flush out any buffered data */ + emit_eobrun(entropy); + flush_bits_e(entropy); + + cinfo->dest->next_output_byte = entropy->next_output_byte; + cinfo->dest->free_in_buffer = entropy->free_in_buffer; + } else { + /* Load up working state ... flush_bits needs it */ + state.next_output_byte = cinfo->dest->next_output_byte; + state.free_in_buffer = cinfo->dest->free_in_buffer; + ASSIGN_STATE(state.cur, entropy->saved); + state.cinfo = cinfo; + + /* Flush out the last data */ + if (! flush_bits_s(&state)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Update state */ + cinfo->dest->next_output_byte = state.next_output_byte; + cinfo->dest->free_in_buffer = state.free_in_buffer; + ASSIGN_STATE(entropy->saved, state.cur); + } +} + + +/* + * Huffman coding optimization. + * + * We first scan the supplied data and count the number of uses of each symbol + * that is to be Huffman-coded. (This process MUST agree with the code above.) + * Then we build a Huffman coding tree for the observed counts. + * Symbols which are not needed at all for the particular image are not + * assigned any code, which saves space in the DHT marker as well as in + * the compressed data. + */ + + +/* Process a single block's worth of coefficients */ + +LOCAL(void) +htest_one_block (j_compress_ptr cinfo, JCOEFPTR block, int last_dc_val, + long dc_counts[], long ac_counts[]) +{ + register int temp; + register int nbits; + register int k, r; + int Se = cinfo->lim_Se; + const int * natural_order = cinfo->natural_order; + + /* Encode the DC coefficient difference per section F.1.2.1 */ + + temp = block[0] - last_dc_val; + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 0; + while (temp) { + nbits++; + temp >>= 1; + } + /* Check for out-of-range coefficient values. + * Since we're encoding a difference, the range limit is twice as much. + */ + if (nbits > MAX_COEF_BITS+1) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count the Huffman symbol for the number of bits */ + dc_counts[nbits]++; + + /* Encode the AC coefficients per section F.1.2.2 */ + + r = 0; /* r = run length of zeros */ + + for (k = 1; k <= Se; k++) { + if ((temp = block[natural_order[k]]) == 0) { + r++; + } else { + /* if run length > 15, must emit special run-length-16 codes (0xF0) */ + while (r > 15) { + ac_counts[0xF0]++; + r -= 16; + } + + /* Find the number of bits needed for the magnitude of the coefficient */ + if (temp < 0) + temp = -temp; + + /* Find the number of bits needed for the magnitude of the coefficient */ + nbits = 1; /* there must be at least one 1 bit */ + while ((temp >>= 1)) + nbits++; + /* Check for out-of-range coefficient values */ + if (nbits > MAX_COEF_BITS) + ERREXIT(cinfo, JERR_BAD_DCT_COEF); + + /* Count Huffman symbol for run length / number of bits */ + ac_counts[(r << 4) + nbits]++; + + r = 0; + } + } + + /* If the last coef(s) were zero, emit an end-of-block code */ + if (r > 0) + ac_counts[0]++; +} + + +/* + * Trial-encode one MCU's worth of Huffman-compressed coefficients. + * No data is actually output, so no suspension return is possible. + */ + +METHODDEF(boolean) +encode_mcu_gather (j_compress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn, ci; + jpeg_component_info * compptr; + + /* Take care of restart intervals if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) { + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Update restart state */ + entropy->restarts_to_go = cinfo->restart_interval; + } + entropy->restarts_to_go--; + } + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + htest_one_block(cinfo, MCU_data[blkn][0], entropy->saved.last_dc_val[ci], + entropy->dc_count_ptrs[compptr->dc_tbl_no], + entropy->ac_count_ptrs[compptr->ac_tbl_no]); + entropy->saved.last_dc_val[ci] = MCU_data[blkn][0][0]; + } + + return TRUE; +} + + +/* + * Generate the best Huffman code table for the given counts, fill htbl. + * + * The JPEG standard requires that no symbol be assigned a codeword of all + * one bits (so that padding bits added at the end of a compressed segment + * can't look like a valid code). Because of the canonical ordering of + * codewords, this just means that there must be an unused slot in the + * longest codeword length category. Section K.2 of the JPEG spec suggests + * reserving such a slot by pretending that symbol 256 is a valid symbol + * with count 1. In theory that's not optimal; giving it count zero but + * including it in the symbol set anyway should give a better Huffman code. + * But the theoretically better code actually seems to come out worse in + * practice, because it produces more all-ones bytes (which incur stuffed + * zero bytes in the final file). In any case the difference is tiny. + * + * The JPEG standard requires Huffman codes to be no more than 16 bits long. + * If some symbols have a very small but nonzero probability, the Huffman tree + * must be adjusted to meet the code length restriction. We currently use + * the adjustment method suggested in JPEG section K.2. This method is *not* + * optimal; it may not choose the best possible limited-length code. But + * typically only very-low-frequency symbols will be given less-than-optimal + * lengths, so the code is almost optimal. Experimental comparisons against + * an optimal limited-length-code algorithm indicate that the difference is + * microscopic --- usually less than a hundredth of a percent of total size. + * So the extra complexity of an optimal algorithm doesn't seem worthwhile. + */ + +LOCAL(void) +jpeg_gen_optimal_table (j_compress_ptr cinfo, JHUFF_TBL * htbl, long freq[]) +{ +#define MAX_CLEN 32 /* assumed maximum initial code length */ + UINT8 bits[MAX_CLEN+1]; /* bits[k] = # of symbols with code length k */ + int codesize[257]; /* codesize[k] = code length of symbol k */ + int others[257]; /* next symbol in current branch of tree */ + int c1, c2; + int p, i, j; + long v; + + /* This algorithm is explained in section K.2 of the JPEG standard */ + + MEMZERO(bits, SIZEOF(bits)); + MEMZERO(codesize, SIZEOF(codesize)); + for (i = 0; i < 257; i++) + others[i] = -1; /* init links to empty */ + + freq[256] = 1; /* make sure 256 has a nonzero count */ + /* Including the pseudo-symbol 256 in the Huffman procedure guarantees + * that no real symbol is given code-value of all ones, because 256 + * will be placed last in the largest codeword category. + */ + + /* Huffman's basic algorithm to assign optimal code lengths to symbols */ + + for (;;) { + /* Find the smallest nonzero frequency, set c1 = its symbol */ + /* In case of ties, take the larger symbol number */ + c1 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v) { + v = freq[i]; + c1 = i; + } + } + + /* Find the next smallest nonzero frequency, set c2 = its symbol */ + /* In case of ties, take the larger symbol number */ + c2 = -1; + v = 1000000000L; + for (i = 0; i <= 256; i++) { + if (freq[i] && freq[i] <= v && i != c1) { + v = freq[i]; + c2 = i; + } + } + + /* Done if we've merged everything into one frequency */ + if (c2 < 0) + break; + + /* Else merge the two counts/trees */ + freq[c1] += freq[c2]; + freq[c2] = 0; + + /* Increment the codesize of everything in c1's tree branch */ + codesize[c1]++; + while (others[c1] >= 0) { + c1 = others[c1]; + codesize[c1]++; + } + + others[c1] = c2; /* chain c2 onto c1's tree branch */ + + /* Increment the codesize of everything in c2's tree branch */ + codesize[c2]++; + while (others[c2] >= 0) { + c2 = others[c2]; + codesize[c2]++; + } + } + + /* Now count the number of symbols of each code length */ + for (i = 0; i <= 256; i++) { + if (codesize[i]) { + /* The JPEG standard seems to think that this can't happen, */ + /* but I'm paranoid... */ + if (codesize[i] > MAX_CLEN) + ERREXIT(cinfo, JERR_HUFF_CLEN_OVERFLOW); + + bits[codesize[i]]++; + } + } + + /* JPEG doesn't allow symbols with code lengths over 16 bits, so if the pure + * Huffman procedure assigned any such lengths, we must adjust the coding. + * Here is what the JPEG spec says about how this next bit works: + * Since symbols are paired for the longest Huffman code, the symbols are + * removed from this length category two at a time. The prefix for the pair + * (which is one bit shorter) is allocated to one of the pair; then, + * skipping the BITS entry for that prefix length, a code word from the next + * shortest nonzero BITS entry is converted into a prefix for two code words + * one bit longer. + */ + + for (i = MAX_CLEN; i > 16; i--) { + while (bits[i] > 0) { + j = i - 2; /* find length of new prefix to be used */ + while (bits[j] == 0) + j--; + + bits[i] -= 2; /* remove two symbols */ + bits[i-1]++; /* one goes in this length */ + bits[j+1] += 2; /* two new symbols in this length */ + bits[j]--; /* symbol of this length is now a prefix */ + } + } + + /* Remove the count for the pseudo-symbol 256 from the largest codelength */ + while (bits[i] == 0) /* find largest codelength still in use */ + i--; + bits[i]--; + + /* Return final symbol counts (only for lengths 0..16) */ + MEMCOPY(htbl->bits, bits, SIZEOF(htbl->bits)); + + /* Return a list of the symbols sorted by code length */ + /* It's not real clear to me why we don't need to consider the codelength + * changes made above, but the JPEG spec seems to think this works. + */ + p = 0; + for (i = 1; i <= MAX_CLEN; i++) { + for (j = 0; j <= 255; j++) { + if (codesize[j] == i) { + htbl->huffval[p] = (UINT8) j; + p++; + } + } + } + + /* Set sent_table FALSE so updated table will be written to JPEG file. */ + htbl->sent_table = FALSE; +} + + +/* + * Finish up a statistics-gathering pass and create the new Huffman tables. + */ + +METHODDEF(void) +finish_pass_gather (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + JHUFF_TBL **htblptr; + boolean did_dc[NUM_HUFF_TBLS]; + boolean did_ac[NUM_HUFF_TBLS]; + + /* It's important not to apply jpeg_gen_optimal_table more than once + * per table, because it clobbers the input frequency counts! + */ + if (cinfo->progressive_mode) + /* Flush out buffered data (all we care about is counting the EOB symbol) */ + emit_eobrun(entropy); + + MEMZERO(did_dc, SIZEOF(did_dc)); + MEMZERO(did_ac, SIZEOF(did_ac)); + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (! did_dc[tbl]) { + htblptr = & cinfo->dc_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->dc_count_ptrs[tbl]); + did_dc[tbl] = TRUE; + } + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (! did_ac[tbl]) { + htblptr = & cinfo->ac_huff_tbl_ptrs[tbl]; + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + jpeg_gen_optimal_table(cinfo, *htblptr, entropy->ac_count_ptrs[tbl]); + did_ac[tbl] = TRUE; + } + } + } +} + + +/* + * Initialize for a Huffman-compressed scan. + * If gather_statistics is TRUE, we do not output anything during the scan, + * just count the Huffman symbols used and generate Huffman code tables. + */ + +METHODDEF(void) +start_pass_huff (j_compress_ptr cinfo, boolean gather_statistics) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (gather_statistics) + entropy->pub.finish_pass = finish_pass_gather; + else + entropy->pub.finish_pass = finish_pass_huff; + + if (cinfo->progressive_mode) { + entropy->cinfo = cinfo; + entropy->gather_statistics = gather_statistics; + + /* We assume jcmaster.c already validated the scan parameters. */ + + /* Select execution routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_first; + else + entropy->pub.encode_mcu = encode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.encode_mcu = encode_mcu_DC_refine; + else { + entropy->pub.encode_mcu = encode_mcu_AC_refine; + /* AC refinement needs a correction bit buffer */ + if (entropy->bit_buffer == NULL) + entropy->bit_buffer = (char *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + MAX_CORR_BITS * SIZEOF(char)); + } + } + + /* Initialize AC stuff */ + entropy->ac_tbl_no = cinfo->cur_comp_info[0]->ac_tbl_no; + entropy->EOBRUN = 0; + entropy->BE = 0; + } else { + if (gather_statistics) + entropy->pub.encode_mcu = encode_mcu_gather; + else + entropy->pub.encode_mcu = encode_mcu_huff; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) { + tbl = compptr->dc_tbl_no; + if (gather_statistics) { + /* Check for invalid table index */ + /* (make_c_derived_tbl does this in the other path) */ + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + /* Allocate and zero the statistics tables */ + /* Note that jpeg_gen_optimal_table expects 257 entries in each table! */ + if (entropy->dc_count_ptrs[tbl] == NULL) + entropy->dc_count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->dc_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + jpeg_make_c_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + /* AC needs no table when not present */ + if (cinfo->Se) { + tbl = compptr->ac_tbl_no; + if (gather_statistics) { + if (tbl < 0 || tbl >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tbl); + if (entropy->ac_count_ptrs[tbl] == NULL) + entropy->ac_count_ptrs[tbl] = (long *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 257 * SIZEOF(long)); + MEMZERO(entropy->ac_count_ptrs[tbl], 257 * SIZEOF(long)); + } else { + jpeg_make_c_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + } + } + + /* Initialize bit buffer to empty */ + entropy->saved.put_buffer = 0; + entropy->saved.put_bits = 0; + + /* Initialize restart stuff */ + entropy->restarts_to_go = cinfo->restart_interval; + entropy->next_restart_num = 0; +} + + +/* + * Module initialization routine for Huffman entropy encoding. + */ + +GLOBAL(void) +jinit_huff_encoder (j_compress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_encoder)); + cinfo->entropy = (struct jpeg_entropy_encoder *) entropy; + entropy->pub.start_pass = start_pass_huff; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + entropy->dc_count_ptrs[i] = entropy->ac_count_ptrs[i] = NULL; + } + + if (cinfo->progressive_mode) + entropy->bit_buffer = NULL; /* needed only in AC refinement scan */ +} diff --git a/src/3rdparty/libjpeg/jcinit.c b/src/3rdparty/libjpeg/jcinit.c new file mode 100644 index 0000000..0ba310f --- /dev/null +++ b/src/3rdparty/libjpeg/jcinit.c @@ -0,0 +1,65 @@ +/* + * jcinit.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains initialization logic for the JPEG compressor. + * This routine is in charge of selecting the modules to be executed and + * making an initialization call to each one. + * + * Logically, this code belongs in jcmaster.c. It's split out because + * linking this routine implies linking the entire compression library. + * For a transcoding-only application, we want to be able to use jcmaster.c + * without linking in the whole library. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Master selection of compression modules. + * This is done once at the start of processing an image. We determine + * which modules will be used and give them appropriate initialization calls. + */ + +GLOBAL(void) +jinit_compress_master (j_compress_ptr cinfo) +{ + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, FALSE /* full compression */); + + /* Preprocessing */ + if (! cinfo->raw_data_in) { + jinit_color_converter(cinfo); + jinit_downsampler(cinfo); + jinit_c_prep_controller(cinfo, FALSE /* never need full buffer here */); + } + /* Forward DCT */ + jinit_forward_dct(cinfo); + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* Need a full-image coefficient buffer in any multi-pass mode. */ + jinit_c_coef_controller(cinfo, + (boolean) (cinfo->num_scans > 1 || cinfo->optimize_coding)); + jinit_c_main_controller(cinfo, FALSE /* never need full buffer here */); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} diff --git a/src/3rdparty/libjpeg/jcmainct.c b/src/3rdparty/libjpeg/jcmainct.c new file mode 100644 index 0000000..7de75d1 --- /dev/null +++ b/src/3rdparty/libjpeg/jcmainct.c @@ -0,0 +1,293 @@ +/* + * jcmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for compression. + * The main buffer lies between the pre-processor and the JPEG + * compressor proper; it holds downsampled data in the JPEG colorspace. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Note: currently, there is no operating mode in which a full-image buffer + * is needed at this step. If there were, that mode could not be used with + * "raw data" input, since this module is bypassed in that case. However, + * we've left the code here for possible use in special applications. + */ +#undef FULL_MAIN_BUFFER_SUPPORTED + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_main_controller pub; /* public fields */ + + JDIMENSION cur_iMCU_row; /* number of current iMCU row */ + JDIMENSION rowgroup_ctr; /* counts row groups received in iMCU row */ + boolean suspended; /* remember if we suspended output */ + J_BUF_MODE pass_mode; /* current operating mode */ + + /* If using just a strip buffer, this points to the entire set of buffers + * (we allocate one for each component). In the full-image case, this + * points to the currently accessible strips of the virtual arrays. + */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* If using full-image storage, this array holds pointers to virtual-array + * control blocks for each component. Unused if not full-image storage. + */ + jvirt_sarray_ptr whole_image[MAX_COMPONENTS]; +#endif +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#ifdef FULL_MAIN_BUFFER_SUPPORTED +METHODDEF(void) process_data_buffer_main + JPP((j_compress_ptr cinfo, JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, JDIMENSION in_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + /* Do nothing in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + main->cur_iMCU_row = 0; /* initialize counters */ + main->rowgroup_ctr = 0; + main->suspended = FALSE; + main->pass_mode = pass_mode; /* save mode for use by process_data */ + + switch (pass_mode) { + case JBUF_PASS_THRU: +#ifdef FULL_MAIN_BUFFER_SUPPORTED + if (main->whole_image[0] != NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + main->pub.process_data = process_data_simple_main; + break; +#ifdef FULL_MAIN_BUFFER_SUPPORTED + case JBUF_SAVE_SOURCE: + case JBUF_CRANK_DEST: + case JBUF_SAVE_AND_PASS: + if (main->whole_image[0] == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + main->pub.process_data = process_data_buffer_main; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This routine handles the simple pass-through mode, + * where we have only a strip buffer. + */ + +METHODDEF(void) +process_data_simple_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Read input data if we haven't filled the main buffer yet */ + if (main->rowgroup_ctr < (JDIMENSION) cinfo->min_DCT_v_scaled_size) + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + main->buffer, &main->rowgroup_ctr, + (JDIMENSION) cinfo->min_DCT_v_scaled_size); + + /* If we don't have a full iMCU row buffered, return to application for + * more data. Note that preprocessor will always pad to fill the iMCU row + * at the bottom of the image. + */ + if (main->rowgroup_ctr != (JDIMENSION) cinfo->min_DCT_v_scaled_size) + return; + + /* Send the completed row to the compressor */ + if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! main->suspended) { + (*in_row_ctr)--; + main->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (main->suspended) { + (*in_row_ctr)++; + main->suspended = FALSE; + } + main->rowgroup_ctr = 0; + main->cur_iMCU_row++; + } +} + + +#ifdef FULL_MAIN_BUFFER_SUPPORTED + +/* + * Process some data. + * This routine handles all of the modes that use a full-size buffer. + */ + +METHODDEF(void) +process_data_buffer_main (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci; + jpeg_component_info *compptr; + boolean writing = (main->pass_mode != JBUF_CRANK_DEST); + + while (main->cur_iMCU_row < cinfo->total_iMCU_rows) { + /* Realign the virtual buffers if at the start of an iMCU row. */ + if (main->rowgroup_ctr == 0) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + main->buffer[ci] = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, main->whole_image[ci], + main->cur_iMCU_row * (compptr->v_samp_factor * DCTSIZE), + (JDIMENSION) (compptr->v_samp_factor * DCTSIZE), writing); + } + /* In a read pass, pretend we just read some source data. */ + if (! writing) { + *in_row_ctr += cinfo->max_v_samp_factor * DCTSIZE; + main->rowgroup_ctr = DCTSIZE; + } + } + + /* If a write pass, read input data until the current iMCU row is full. */ + /* Note: preprocessor will pad if necessary to fill the last iMCU row. */ + if (writing) { + (*cinfo->prep->pre_process_data) (cinfo, + input_buf, in_row_ctr, in_rows_avail, + main->buffer, &main->rowgroup_ctr, + (JDIMENSION) DCTSIZE); + /* Return to application if we need more data to fill the iMCU row. */ + if (main->rowgroup_ctr < DCTSIZE) + return; + } + + /* Emit data, unless this is a sink-only pass. */ + if (main->pass_mode != JBUF_SAVE_SOURCE) { + if (! (*cinfo->coef->compress_data) (cinfo, main->buffer)) { + /* If compressor did not consume the whole row, then we must need to + * suspend processing and return to the application. In this situation + * we pretend we didn't yet consume the last input row; otherwise, if + * it happened to be the last row of the image, the application would + * think we were done. + */ + if (! main->suspended) { + (*in_row_ctr)--; + main->suspended = TRUE; + } + return; + } + /* We did finish the row. Undo our little suspension hack if a previous + * call suspended; then mark the main buffer empty. + */ + if (main->suspended) { + (*in_row_ctr)++; + main->suspended = FALSE; + } + } + + /* If get here, we are done with this iMCU row. Mark buffer empty. */ + main->rowgroup_ctr = 0; + main->cur_iMCU_row++; + } +} + +#endif /* FULL_MAIN_BUFFER_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_c_main_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr main; + int ci; + jpeg_component_info *compptr; + + main = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = (struct jpeg_c_main_controller *) main; + main->pub.start_pass = start_pass_main; + + /* We don't need to create a buffer in raw-data mode. */ + if (cinfo->raw_data_in) + return; + + /* Create the buffer. It holds downsampled data, so each component + * may be of a different size. + */ + if (need_full_buffer) { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + /* Allocate a full-image virtual array for each component */ + /* Note we pad the bottom to a multiple of the iMCU height */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + main->whole_image[ci] = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor) * DCTSIZE, + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); + } +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif + } else { +#ifdef FULL_MAIN_BUFFER_SUPPORTED + main->whole_image[0] = NULL; /* flag for no virtual arrays */ +#endif + /* Allocate a strip buffer for each component */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + main->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (JDIMENSION) (compptr->v_samp_factor * compptr->DCT_v_scaled_size)); + } + } +} diff --git a/src/3rdparty/libjpeg/jcmarker.c b/src/3rdparty/libjpeg/jcmarker.c new file mode 100644 index 0000000..2e28983 --- /dev/null +++ b/src/3rdparty/libjpeg/jcmarker.c @@ -0,0 +1,680 @@ +/* + * jcmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to write JPEG datastream markers. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_writer pub; /* public fields */ + + unsigned int last_restart_interval; /* last DRI value emitted; 0 after SOI */ +} my_marker_writer; + +typedef my_marker_writer * my_marker_ptr; + + +/* + * Basic output routines. + * + * Note that we do not support suspension while writing a marker. + * Therefore, an application using suspension must ensure that there is + * enough buffer space for the initial markers (typ. 600-700 bytes) before + * calling jpeg_start_compress, and enough space to write the trailing EOI + * (a few bytes) before calling jpeg_finish_compress. Multipass compression + * modes are not supported at all with suspension, so those two are the only + * points where markers will be written. + */ + +LOCAL(void) +emit_byte (j_compress_ptr cinfo, int val) +/* Emit a byte */ +{ + struct jpeg_destination_mgr * dest = cinfo->dest; + + *(dest->next_output_byte)++ = (JOCTET) val; + if (--dest->free_in_buffer == 0) { + if (! (*dest->empty_output_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + } +} + + +LOCAL(void) +emit_marker (j_compress_ptr cinfo, JPEG_MARKER mark) +/* Emit a marker code */ +{ + emit_byte(cinfo, 0xFF); + emit_byte(cinfo, (int) mark); +} + + +LOCAL(void) +emit_2bytes (j_compress_ptr cinfo, int value) +/* Emit a 2-byte integer; these are always MSB first in JPEG files */ +{ + emit_byte(cinfo, (value >> 8) & 0xFF); + emit_byte(cinfo, value & 0xFF); +} + + +/* + * Routines to write specific marker types. + */ + +LOCAL(int) +emit_dqt (j_compress_ptr cinfo, int index) +/* Emit a DQT marker */ +/* Returns the precision used (0 = 8bits, 1 = 16bits) for baseline checking */ +{ + JQUANT_TBL * qtbl = cinfo->quant_tbl_ptrs[index]; + int prec; + int i; + + if (qtbl == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, index); + + prec = 0; + for (i = 0; i <= cinfo->lim_Se; i++) { + if (qtbl->quantval[cinfo->natural_order[i]] > 255) + prec = 1; + } + + if (! qtbl->sent_table) { + emit_marker(cinfo, M_DQT); + + emit_2bytes(cinfo, + prec ? cinfo->lim_Se * 2 + 2 + 1 + 2 : cinfo->lim_Se + 1 + 1 + 2); + + emit_byte(cinfo, index + (prec<<4)); + + for (i = 0; i <= cinfo->lim_Se; i++) { + /* The table entries must be emitted in zigzag order. */ + unsigned int qval = qtbl->quantval[cinfo->natural_order[i]]; + if (prec) + emit_byte(cinfo, (int) (qval >> 8)); + emit_byte(cinfo, (int) (qval & 0xFF)); + } + + qtbl->sent_table = TRUE; + } + + return prec; +} + + +LOCAL(void) +emit_dht (j_compress_ptr cinfo, int index, boolean is_ac) +/* Emit a DHT marker */ +{ + JHUFF_TBL * htbl; + int length, i; + + if (is_ac) { + htbl = cinfo->ac_huff_tbl_ptrs[index]; + index += 0x10; /* output index has AC bit set */ + } else { + htbl = cinfo->dc_huff_tbl_ptrs[index]; + } + + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, index); + + if (! htbl->sent_table) { + emit_marker(cinfo, M_DHT); + + length = 0; + for (i = 1; i <= 16; i++) + length += htbl->bits[i]; + + emit_2bytes(cinfo, length + 2 + 1 + 16); + emit_byte(cinfo, index); + + for (i = 1; i <= 16; i++) + emit_byte(cinfo, htbl->bits[i]); + + for (i = 0; i < length; i++) + emit_byte(cinfo, htbl->huffval[i]); + + htbl->sent_table = TRUE; + } +} + + +LOCAL(void) +emit_dac (j_compress_ptr cinfo) +/* Emit a DAC marker */ +/* Since the useful info is so small, we want to emit all the tables in */ +/* one DAC marker. Therefore this routine does its own scan of the table. */ +{ +#ifdef C_ARITH_CODING_SUPPORTED + char dc_in_use[NUM_ARITH_TBLS]; + char ac_in_use[NUM_ARITH_TBLS]; + int length, i; + jpeg_component_info *compptr; + + for (i = 0; i < NUM_ARITH_TBLS; i++) + dc_in_use[i] = ac_in_use[i] = 0; + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + dc_in_use[compptr->dc_tbl_no] = 1; + /* AC needs no table when not present */ + if (cinfo->Se) + ac_in_use[compptr->ac_tbl_no] = 1; + } + + length = 0; + for (i = 0; i < NUM_ARITH_TBLS; i++) + length += dc_in_use[i] + ac_in_use[i]; + + emit_marker(cinfo, M_DAC); + + emit_2bytes(cinfo, length*2 + 2); + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + if (dc_in_use[i]) { + emit_byte(cinfo, i); + emit_byte(cinfo, cinfo->arith_dc_L[i] + (cinfo->arith_dc_U[i]<<4)); + } + if (ac_in_use[i]) { + emit_byte(cinfo, i + 0x10); + emit_byte(cinfo, cinfo->arith_ac_K[i]); + } + } +#endif /* C_ARITH_CODING_SUPPORTED */ +} + + +LOCAL(void) +emit_dri (j_compress_ptr cinfo) +/* Emit a DRI marker */ +{ + emit_marker(cinfo, M_DRI); + + emit_2bytes(cinfo, 4); /* fixed length */ + + emit_2bytes(cinfo, (int) cinfo->restart_interval); +} + + +LOCAL(void) +emit_sof (j_compress_ptr cinfo, JPEG_MARKER code) +/* Emit a SOF marker */ +{ + int ci; + jpeg_component_info *compptr; + + emit_marker(cinfo, code); + + emit_2bytes(cinfo, 3 * cinfo->num_components + 2 + 5 + 1); /* length */ + + /* Make sure image isn't bigger than SOF field can handle */ + if ((long) cinfo->jpeg_height > 65535L || + (long) cinfo->jpeg_width > 65535L) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) 65535); + + emit_byte(cinfo, cinfo->data_precision); + emit_2bytes(cinfo, (int) cinfo->jpeg_height); + emit_2bytes(cinfo, (int) cinfo->jpeg_width); + + emit_byte(cinfo, cinfo->num_components); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + emit_byte(cinfo, compptr->component_id); + emit_byte(cinfo, (compptr->h_samp_factor << 4) + compptr->v_samp_factor); + emit_byte(cinfo, compptr->quant_tbl_no); + } +} + + +LOCAL(void) +emit_sos (j_compress_ptr cinfo) +/* Emit a SOS marker */ +{ + int i, td, ta; + jpeg_component_info *compptr; + + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 * cinfo->comps_in_scan + 2 + 1 + 3); /* length */ + + emit_byte(cinfo, cinfo->comps_in_scan); + + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + emit_byte(cinfo, compptr->component_id); + + /* We emit 0 for unused field(s); this is recommended by the P&M text + * but does not seem to be specified in the standard. + */ + + /* DC needs no table for refinement scan */ + td = cinfo->Ss == 0 && cinfo->Ah == 0 ? compptr->dc_tbl_no : 0; + /* AC needs no table when not present */ + ta = cinfo->Se ? compptr->ac_tbl_no : 0; + + emit_byte(cinfo, (td << 4) + ta); + } + + emit_byte(cinfo, cinfo->Ss); + emit_byte(cinfo, cinfo->Se); + emit_byte(cinfo, (cinfo->Ah << 4) + cinfo->Al); +} + + +LOCAL(void) +emit_pseudo_sos (j_compress_ptr cinfo) +/* Emit a pseudo SOS marker */ +{ + emit_marker(cinfo, M_SOS); + + emit_2bytes(cinfo, 2 + 1 + 3); /* length */ + + emit_byte(cinfo, 0); /* Ns */ + + emit_byte(cinfo, 0); /* Ss */ + emit_byte(cinfo, cinfo->block_size * cinfo->block_size - 1); /* Se */ + emit_byte(cinfo, 0); /* Ah/Al */ +} + + +LOCAL(void) +emit_jfif_app0 (j_compress_ptr cinfo) +/* Emit a JFIF-compliant APP0 marker */ +{ + /* + * Length of APP0 block (2 bytes) + * Block ID (4 bytes - ASCII "JFIF") + * Zero byte (1 byte to terminate the ID string) + * Version Major, Minor (2 bytes - major first) + * Units (1 byte - 0x00 = none, 0x01 = inch, 0x02 = cm) + * Xdpu (2 bytes - dots per unit horizontal) + * Ydpu (2 bytes - dots per unit vertical) + * Thumbnail X size (1 byte) + * Thumbnail Y size (1 byte) + */ + + emit_marker(cinfo, M_APP0); + + emit_2bytes(cinfo, 2 + 4 + 1 + 2 + 1 + 2 + 2 + 1 + 1); /* length */ + + emit_byte(cinfo, 0x4A); /* Identifier: ASCII "JFIF" */ + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0x49); + emit_byte(cinfo, 0x46); + emit_byte(cinfo, 0); + emit_byte(cinfo, cinfo->JFIF_major_version); /* Version fields */ + emit_byte(cinfo, cinfo->JFIF_minor_version); + emit_byte(cinfo, cinfo->density_unit); /* Pixel size information */ + emit_2bytes(cinfo, (int) cinfo->X_density); + emit_2bytes(cinfo, (int) cinfo->Y_density); + emit_byte(cinfo, 0); /* No thumbnail image */ + emit_byte(cinfo, 0); +} + + +LOCAL(void) +emit_adobe_app14 (j_compress_ptr cinfo) +/* Emit an Adobe APP14 marker */ +{ + /* + * Length of APP14 block (2 bytes) + * Block ID (5 bytes - ASCII "Adobe") + * Version Number (2 bytes - currently 100) + * Flags0 (2 bytes - currently 0) + * Flags1 (2 bytes - currently 0) + * Color transform (1 byte) + * + * Although Adobe TN 5116 mentions Version = 101, all the Adobe files + * now in circulation seem to use Version = 100, so that's what we write. + * + * We write the color transform byte as 1 if the JPEG color space is + * YCbCr, 2 if it's YCCK, 0 otherwise. Adobe's definition has to do with + * whether the encoder performed a transformation, which is pretty useless. + */ + + emit_marker(cinfo, M_APP14); + + emit_2bytes(cinfo, 2 + 5 + 2 + 2 + 2 + 1); /* length */ + + emit_byte(cinfo, 0x41); /* Identifier: ASCII "Adobe" */ + emit_byte(cinfo, 0x64); + emit_byte(cinfo, 0x6F); + emit_byte(cinfo, 0x62); + emit_byte(cinfo, 0x65); + emit_2bytes(cinfo, 100); /* Version */ + emit_2bytes(cinfo, 0); /* Flags0 */ + emit_2bytes(cinfo, 0); /* Flags1 */ + switch (cinfo->jpeg_color_space) { + case JCS_YCbCr: + emit_byte(cinfo, 1); /* Color transform = 1 */ + break; + case JCS_YCCK: + emit_byte(cinfo, 2); /* Color transform = 2 */ + break; + default: + emit_byte(cinfo, 0); /* Color transform = 0 */ + break; + } +} + + +/* + * These routines allow writing an arbitrary marker with parameters. + * The only intended use is to emit COM or APPn markers after calling + * write_file_header and before calling write_frame_header. + * Other uses are not guaranteed to produce desirable results. + * Counting the parameter bytes properly is the caller's responsibility. + */ + +METHODDEF(void) +write_marker_header (j_compress_ptr cinfo, int marker, unsigned int datalen) +/* Emit an arbitrary marker header */ +{ + if (datalen > (unsigned int) 65533) /* safety check */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + emit_marker(cinfo, (JPEG_MARKER) marker); + + emit_2bytes(cinfo, (int) (datalen + 2)); /* total length */ +} + +METHODDEF(void) +write_marker_byte (j_compress_ptr cinfo, int val) +/* Emit one byte of marker parameters following write_marker_header */ +{ + emit_byte(cinfo, val); +} + + +/* + * Write datastream header. + * This consists of an SOI and optional APPn markers. + * We recommend use of the JFIF marker, but not the Adobe marker, + * when using YCbCr or grayscale data. The JFIF marker should NOT + * be used for any other JPEG colorspace. The Adobe marker is helpful + * to distinguish RGB, CMYK, and YCCK colorspaces. + * Note that an application can write additional header markers after + * jpeg_start_compress returns. + */ + +METHODDEF(void) +write_file_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + emit_marker(cinfo, M_SOI); /* first the SOI */ + + /* SOI is defined to reset restart interval to 0 */ + marker->last_restart_interval = 0; + + if (cinfo->write_JFIF_header) /* next an optional JFIF APP0 */ + emit_jfif_app0(cinfo); + if (cinfo->write_Adobe_marker) /* next an optional Adobe APP14 */ + emit_adobe_app14(cinfo); +} + + +/* + * Write frame header. + * This consists of DQT and SOFn markers, and a conditional pseudo SOS marker. + * Note that we do not emit the SOF until we have emitted the DQT(s). + * This avoids compatibility problems with incorrect implementations that + * try to error-check the quant table numbers as soon as they see the SOF. + */ + +METHODDEF(void) +write_frame_header (j_compress_ptr cinfo) +{ + int ci, prec; + boolean is_baseline; + jpeg_component_info *compptr; + + /* Emit DQT for each quantization table. + * Note that emit_dqt() suppresses any duplicate tables. + */ + prec = 0; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prec += emit_dqt(cinfo, compptr->quant_tbl_no); + } + /* now prec is nonzero iff there are any 16-bit quant tables. */ + + /* Check for a non-baseline specification. + * Note we assume that Huffman table numbers won't be changed later. + */ + if (cinfo->arith_code || cinfo->progressive_mode || + cinfo->data_precision != 8 || cinfo->block_size != DCTSIZE) { + is_baseline = FALSE; + } else { + is_baseline = TRUE; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->dc_tbl_no > 1 || compptr->ac_tbl_no > 1) + is_baseline = FALSE; + } + if (prec && is_baseline) { + is_baseline = FALSE; + /* If it's baseline except for quantizer size, warn the user */ + TRACEMS(cinfo, 0, JTRC_16BIT_TABLES); + } + } + + /* Emit the proper SOF marker */ + if (cinfo->arith_code) { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF10); /* SOF code for progressive arithmetic */ + else + emit_sof(cinfo, M_SOF9); /* SOF code for sequential arithmetic */ + } else { + if (cinfo->progressive_mode) + emit_sof(cinfo, M_SOF2); /* SOF code for progressive Huffman */ + else if (is_baseline) + emit_sof(cinfo, M_SOF0); /* SOF code for baseline implementation */ + else + emit_sof(cinfo, M_SOF1); /* SOF code for non-baseline Huffman file */ + } + + /* Check to emit pseudo SOS marker */ + if (cinfo->progressive_mode && cinfo->block_size != DCTSIZE) + emit_pseudo_sos(cinfo); +} + + +/* + * Write scan header. + * This consists of DHT or DAC markers, optional DRI, and SOS. + * Compressed data will be written following the SOS. + */ + +METHODDEF(void) +write_scan_header (j_compress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + int i; + jpeg_component_info *compptr; + + if (cinfo->arith_code) { + /* Emit arith conditioning info. We may have some duplication + * if the file has multiple scans, but it's so small it's hardly + * worth worrying about. + */ + emit_dac(cinfo); + } else { + /* Emit Huffman tables. + * Note that emit_dht() suppresses any duplicate tables. + */ + for (i = 0; i < cinfo->comps_in_scan; i++) { + compptr = cinfo->cur_comp_info[i]; + /* DC needs no table for refinement scan */ + if (cinfo->Ss == 0 && cinfo->Ah == 0) + emit_dht(cinfo, compptr->dc_tbl_no, FALSE); + /* AC needs no table when not present */ + if (cinfo->Se) + emit_dht(cinfo, compptr->ac_tbl_no, TRUE); + } + } + + /* Emit DRI if required --- note that DRI value could change for each scan. + * We avoid wasting space with unnecessary DRIs, however. + */ + if (cinfo->restart_interval != marker->last_restart_interval) { + emit_dri(cinfo); + marker->last_restart_interval = cinfo->restart_interval; + } + + emit_sos(cinfo); +} + + +/* + * Write datastream trailer. + */ + +METHODDEF(void) +write_file_trailer (j_compress_ptr cinfo) +{ + emit_marker(cinfo, M_EOI); +} + + +/* + * Write an abbreviated table-specification datastream. + * This consists of SOI, DQT and DHT tables, and EOI. + * Any table that is defined and not marked sent_table = TRUE will be + * emitted. Note that all tables will be marked sent_table = TRUE at exit. + */ + +METHODDEF(void) +write_tables_only (j_compress_ptr cinfo) +{ + int i; + + emit_marker(cinfo, M_SOI); + + for (i = 0; i < NUM_QUANT_TBLS; i++) { + if (cinfo->quant_tbl_ptrs[i] != NULL) + (void) emit_dqt(cinfo, i); + } + + if (! cinfo->arith_code) { + for (i = 0; i < NUM_HUFF_TBLS; i++) { + if (cinfo->dc_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, FALSE); + if (cinfo->ac_huff_tbl_ptrs[i] != NULL) + emit_dht(cinfo, i, TRUE); + } + } + + emit_marker(cinfo, M_EOI); +} + + +/* + * Initialize the marker writer module. + */ + +GLOBAL(void) +jinit_marker_writer (j_compress_ptr cinfo) +{ + my_marker_ptr marker; + + /* Create the subobject */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_marker_writer)); + cinfo->marker = (struct jpeg_marker_writer *) marker; + /* Initialize method pointers */ + marker->pub.write_file_header = write_file_header; + marker->pub.write_frame_header = write_frame_header; + marker->pub.write_scan_header = write_scan_header; + marker->pub.write_file_trailer = write_file_trailer; + marker->pub.write_tables_only = write_tables_only; + marker->pub.write_marker_header = write_marker_header; + marker->pub.write_marker_byte = write_marker_byte; + /* Initialize private state */ + marker->last_restart_interval = 0; +} diff --git a/src/3rdparty/libjpeg/jcmaster.c b/src/3rdparty/libjpeg/jcmaster.c new file mode 100644 index 0000000..5284e58 --- /dev/null +++ b/src/3rdparty/libjpeg/jcmaster.c @@ -0,0 +1,842 @@ +/* + * jcmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2003-2010 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG compressor. + * These routines are concerned with parameter validation, initial setup, + * and inter-pass control (determining the number of passes and the work + * to be done in each pass). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef enum { + main_pass, /* input data, also do first output step */ + huff_opt_pass, /* Huffman code optimization pass */ + output_pass /* data output pass */ +} c_pass_type; + +typedef struct { + struct jpeg_comp_master pub; /* public fields */ + + c_pass_type pass_type; /* the type of the current pass */ + + int pass_number; /* # of passes completed */ + int total_passes; /* total # of passes needed */ + + int scan_number; /* current index in scan_info[] */ +} my_comp_master; + +typedef my_comp_master * my_master_ptr; + + +/* + * Support routines that do various essential calculations. + */ + +/* + * Compute JPEG image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_calc_jpeg_dimensions (j_compress_ptr cinfo) +/* Do computations that are needed before master selection phase */ +{ +#ifdef DCT_SCALING_SUPPORTED + + /* Compute actual JPEG image dimensions and DCT scaling choices. */ + if (cinfo->scale_num >= cinfo->scale_denom * 8) { + /* Provide 8/1 scaling */ + cinfo->jpeg_width = cinfo->image_width << 3; + cinfo->jpeg_height = cinfo->image_height << 3; + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num >= cinfo->scale_denom * 4) { + /* Provide 4/1 scaling */ + cinfo->jpeg_width = cinfo->image_width << 2; + cinfo->jpeg_height = cinfo->image_height << 2; + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * 8) { + /* Provide 8/3 scaling */ + cinfo->jpeg_width = (cinfo->image_width << 1) + (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 2, 3L); + cinfo->jpeg_height = (cinfo->image_height << 1) + (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 2, 3L); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num >= cinfo->scale_denom * 2) { + /* Provide 2/1 scaling */ + cinfo->jpeg_width = cinfo->image_width << 1; + cinfo->jpeg_height = cinfo->image_height << 1; + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * 8) { + /* Provide 8/5 scaling */ + cinfo->jpeg_width = cinfo->image_width + (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 3, 5L); + cinfo->jpeg_height = cinfo->image_height + (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 3, 5L); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * 4) { + /* Provide 4/3 scaling */ + cinfo->jpeg_width = cinfo->image_width + (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 3L); + cinfo->jpeg_height = cinfo->image_height + (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 3L); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * 8) { + /* Provide 8/7 scaling */ + cinfo->jpeg_width = cinfo->image_width + (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 7L); + cinfo->jpeg_height = cinfo->image_height + (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 7L); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num >= cinfo->scale_denom) { + /* Provide 1/1 scaling */ + cinfo->jpeg_width = cinfo->image_width; + cinfo->jpeg_height = cinfo->image_height; + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * 9 >= cinfo->scale_denom * 8) { + /* Provide 8/9 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8, 9L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8, 9L); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * 5 >= cinfo->scale_denom * 4) { + /* Provide 4/5 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 4, 5L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 4, 5L); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * 11 >= cinfo->scale_denom * 8) { + /* Provide 8/11 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8, 11L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8, 11L); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * 3 >= cinfo->scale_denom * 2) { + /* Provide 2/3 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 2, 3L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 2, 3L); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * 13 >= cinfo->scale_denom * 8) { + /* Provide 8/13 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8, 13L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8, 13L); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * 7 >= cinfo->scale_denom * 4) { + /* Provide 4/7 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 4, 7L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 4, 7L); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * 15 >= cinfo->scale_denom * 8) { + /* Provide 8/15 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8, 15L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8, 15L); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide 1/2 scaling */ + cinfo->jpeg_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, 2L); + cinfo->jpeg_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, 2L); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + +#else /* !DCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->jpeg_width = cinfo->image_width; + cinfo->jpeg_height = cinfo->image_height; + cinfo->min_DCT_h_scaled_size = DCTSIZE; + cinfo->min_DCT_v_scaled_size = DCTSIZE; + +#endif /* DCT_SCALING_SUPPORTED */ + + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; +} + + +LOCAL(void) +jpeg_calc_trans_dimensions (j_compress_ptr cinfo) +{ + if (cinfo->min_DCT_h_scaled_size < 1 || cinfo->min_DCT_h_scaled_size > 16 + || cinfo->min_DCT_h_scaled_size != cinfo->min_DCT_v_scaled_size) + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + cinfo->min_DCT_h_scaled_size, cinfo->min_DCT_v_scaled_size); + + cinfo->block_size = cinfo->min_DCT_h_scaled_size; + + switch (cinfo->block_size) { + case 2: cinfo->natural_order = jpeg_natural_order2; break; + case 3: cinfo->natural_order = jpeg_natural_order3; break; + case 4: cinfo->natural_order = jpeg_natural_order4; break; + case 5: cinfo->natural_order = jpeg_natural_order5; break; + case 6: cinfo->natural_order = jpeg_natural_order6; break; + case 7: cinfo->natural_order = jpeg_natural_order7; break; + default: cinfo->natural_order = jpeg_natural_order; break; + } + + cinfo->lim_Se = cinfo->block_size < DCTSIZE ? + cinfo->block_size * cinfo->block_size - 1 : DCTSIZE2-1; +} + + +LOCAL(void) +initial_setup (j_compress_ptr cinfo, boolean transcode_only) +/* Do computations that are needed before master selection phase */ +{ + int ci, ssize; + jpeg_component_info *compptr; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + if (transcode_only) + jpeg_calc_trans_dimensions(cinfo); + else + jpeg_calc_jpeg_dimensions(cinfo); + + /* Sanity check on image dimensions */ + if (cinfo->jpeg_height <= 0 || cinfo->jpeg_width <= 0 || + cinfo->num_components <= 0 || cinfo->input_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->jpeg_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->jpeg_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* Width of an input scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->image_width * (long) cinfo->input_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Fill in the correct component_index value; don't rely on application */ + compptr->component_index = ci; + /* In selecting the actual DCT scaling for each component, we try to + * scale down the chroma components via DCT scaling rather than downsampling. + * This saves time if the downsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; +#ifdef DCT_SCALING_SUPPORTED + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_downsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } +#endif + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support DCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* Mark component needed (this flag isn't actually used for compression) */ + compptr->component_needed = TRUE; + } + + /* Compute number of fully interleaved MCU rows (number of times that + * main controller will call coefficient controller). + */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); +} + + +#ifdef C_MULTISCAN_FILES_SUPPORTED + +LOCAL(void) +validate_script (j_compress_ptr cinfo) +/* Verify that the scan script in cinfo->scan_info[] is valid; also + * determine whether it uses progressive JPEG, and set cinfo->progressive_mode. + */ +{ + const jpeg_scan_info * scanptr; + int scanno, ncomps, ci, coefi, thisi; + int Ss, Se, Ah, Al; + boolean component_sent[MAX_COMPONENTS]; +#ifdef C_PROGRESSIVE_SUPPORTED + int * last_bitpos_ptr; + int last_bitpos[MAX_COMPONENTS][DCTSIZE2]; + /* -1 until that coefficient has been seen; then last Al for it */ +#endif + + if (cinfo->num_scans <= 0) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, 0); + + /* For sequential JPEG, all scans must have Ss=0, Se=DCTSIZE2-1; + * for progressive JPEG, no scan can have this. + */ + scanptr = cinfo->scan_info; + if (scanptr->Ss != 0 || scanptr->Se != DCTSIZE2-1) { +#ifdef C_PROGRESSIVE_SUPPORTED + cinfo->progressive_mode = TRUE; + last_bitpos_ptr = & last_bitpos[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (coefi = 0; coefi < DCTSIZE2; coefi++) + *last_bitpos_ptr++ = -1; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + for (ci = 0; ci < cinfo->num_components; ci++) + component_sent[ci] = FALSE; + } + + for (scanno = 1; scanno <= cinfo->num_scans; scanptr++, scanno++) { + /* Validate component indexes */ + ncomps = scanptr->comps_in_scan; + if (ncomps <= 0 || ncomps > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, ncomps, MAX_COMPS_IN_SCAN); + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (thisi < 0 || thisi >= cinfo->num_components) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + /* Components must appear in SOF order within each scan */ + if (ci > 0 && thisi <= scanptr->component_index[ci-1]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + } + /* Validate progression parameters */ + Ss = scanptr->Ss; + Se = scanptr->Se; + Ah = scanptr->Ah; + Al = scanptr->Al; + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* The JPEG spec simply gives the ranges 0..13 for Ah and Al, but that + * seems wrong: the upper bound ought to depend on data precision. + * Perhaps they really meant 0..N+1 for N-bit precision. + * Here we allow 0..10 for 8-bit data; Al larger than 10 results in + * out-of-range reconstructed DC values during the first DC scan, + * which might cause problems for some decoders. + */ +#if BITS_IN_JSAMPLE == 8 +#define MAX_AH_AL 10 +#else +#define MAX_AH_AL 13 +#endif + if (Ss < 0 || Ss >= DCTSIZE2 || Se < Ss || Se >= DCTSIZE2 || + Ah < 0 || Ah > MAX_AH_AL || Al < 0 || Al > MAX_AH_AL) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + if (Ss == 0) { + if (Se != 0) /* DC and AC together not OK */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + if (ncomps != 1) /* AC scans must be for only one component */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + for (ci = 0; ci < ncomps; ci++) { + last_bitpos_ptr = & last_bitpos[scanptr->component_index[ci]][0]; + if (Ss != 0 && last_bitpos_ptr[0] < 0) /* AC without prior DC scan */ + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + for (coefi = Ss; coefi <= Se; coefi++) { + if (last_bitpos_ptr[coefi] < 0) { + /* first scan of this coefficient */ + if (Ah != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } else { + /* not first scan */ + if (Ah != last_bitpos_ptr[coefi] || Al != Ah-1) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + } + last_bitpos_ptr[coefi] = Al; + } + } +#endif + } else { + /* For sequential JPEG, all progression parameters must be these: */ + if (Ss != 0 || Se != DCTSIZE2-1 || Ah != 0 || Al != 0) + ERREXIT1(cinfo, JERR_BAD_PROG_SCRIPT, scanno); + /* Make sure components are not sent twice */ + for (ci = 0; ci < ncomps; ci++) { + thisi = scanptr->component_index[ci]; + if (component_sent[thisi]) + ERREXIT1(cinfo, JERR_BAD_SCAN_SCRIPT, scanno); + component_sent[thisi] = TRUE; + } + } + } + + /* Now verify that everything got sent. */ + if (cinfo->progressive_mode) { +#ifdef C_PROGRESSIVE_SUPPORTED + /* For progressive mode, we only check that at least some DC data + * got sent for each component; the spec does not require that all bits + * of all coefficients be transmitted. Would it be wiser to enforce + * transmission of all coefficient bits?? + */ + for (ci = 0; ci < cinfo->num_components; ci++) { + if (last_bitpos[ci][0] < 0) + ERREXIT(cinfo, JERR_MISSING_DATA); + } +#endif + } else { + for (ci = 0; ci < cinfo->num_components; ci++) { + if (! component_sent[ci]) + ERREXIT(cinfo, JERR_MISSING_DATA); + } + } +} + + +LOCAL(void) +reduce_script (j_compress_ptr cinfo) +/* Adapt scan script for use with reduced block size; + * assume that script has been validated before. + */ +{ + jpeg_scan_info * scanptr; + int idxout, idxin; + + /* Circumvent const declaration for this function */ + scanptr = (jpeg_scan_info *) cinfo->scan_info; + idxout = 0; + + for (idxin = 0; idxin < cinfo->num_scans; idxin++) { + /* After skipping, idxout becomes smaller than idxin */ + if (idxin != idxout) + /* Copy rest of data; + * note we stay in given chunk of allocated memory. + */ + scanptr[idxout] = scanptr[idxin]; + if (scanptr[idxout].Ss > cinfo->lim_Se) + /* Entire scan out of range - skip this entry */ + continue; + if (scanptr[idxout].Se > cinfo->lim_Se) + /* Limit scan to end of block */ + scanptr[idxout].Se = cinfo->lim_Se; + idxout++; + } + + cinfo->num_scans = idxout; +} + +#endif /* C_MULTISCAN_FILES_SUPPORTED */ + + +LOCAL(void) +select_scan_parameters (j_compress_ptr cinfo) +/* Set up the scan parameters for the current scan */ +{ + int ci; + +#ifdef C_MULTISCAN_FILES_SUPPORTED + if (cinfo->scan_info != NULL) { + /* Prepare for current scan --- the script is already validated */ + my_master_ptr master = (my_master_ptr) cinfo->master; + const jpeg_scan_info * scanptr = cinfo->scan_info + master->scan_number; + + cinfo->comps_in_scan = scanptr->comps_in_scan; + for (ci = 0; ci < scanptr->comps_in_scan; ci++) { + cinfo->cur_comp_info[ci] = + &cinfo->comp_info[scanptr->component_index[ci]]; + } + if (cinfo->progressive_mode) { + cinfo->Ss = scanptr->Ss; + cinfo->Se = scanptr->Se; + cinfo->Ah = scanptr->Ah; + cinfo->Al = scanptr->Al; + return; + } + } + else +#endif + { + /* Prepare for single sequential-JPEG scan containing all components */ + if (cinfo->num_components > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPS_IN_SCAN); + cinfo->comps_in_scan = cinfo->num_components; + for (ci = 0; ci < cinfo->num_components; ci++) { + cinfo->cur_comp_info[ci] = &cinfo->comp_info[ci]; + } + } + cinfo->Ss = 0; + cinfo->Se = cinfo->block_size * cinfo->block_size - 1; + cinfo->Ah = 0; + cinfo->Al = 0; +} + + +LOCAL(void) +per_scan_setup (j_compress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] are already set */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->jpeg_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > C_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } + + /* Convert restart specified in rows to actual MCU count. */ + /* Note that count must fit in 16 bits, so we provide limiting. */ + if (cinfo->restart_in_rows > 0) { + long nominal = (long) cinfo->restart_in_rows * (long) cinfo->MCUs_per_row; + cinfo->restart_interval = (unsigned int) MIN(nominal, 65535L); + } +} + + +/* + * Per-pass setup. + * This is called at the beginning of each pass. We determine which modules + * will be active during this pass and give them appropriate start_pass calls. + * We also set is_last_pass to indicate whether any more passes will be + * required. + */ + +METHODDEF(void) +prepare_for_pass (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + switch (master->pass_type) { + case main_pass: + /* Initial pass: will collect input data, and do either Huffman + * optimization or data output for the first scan. + */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (! cinfo->raw_data_in) { + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->downsample->start_pass) (cinfo); + (*cinfo->prep->start_pass) (cinfo, JBUF_PASS_THRU); + } + (*cinfo->fdct->start_pass) (cinfo); + (*cinfo->entropy->start_pass) (cinfo, cinfo->optimize_coding); + (*cinfo->coef->start_pass) (cinfo, + (master->total_passes > 1 ? + JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + if (cinfo->optimize_coding) { + /* No immediate data output; postpone writing frame/scan headers */ + master->pub.call_pass_startup = FALSE; + } else { + /* Will write frame/scan headers at first jpeg_write_scanlines call */ + master->pub.call_pass_startup = TRUE; + } + break; +#ifdef ENTROPY_OPT_SUPPORTED + case huff_opt_pass: + /* Do Huffman optimization for a scan after the first one. */ + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + if (cinfo->Ss != 0 || cinfo->Ah == 0) { + (*cinfo->entropy->start_pass) (cinfo, TRUE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + master->pub.call_pass_startup = FALSE; + break; + } + /* Special case: Huffman DC refinement scans need no Huffman table + * and therefore we can skip the optimization pass for them. + */ + master->pass_type = output_pass; + master->pass_number++; + /*FALLTHROUGH*/ +#endif + case output_pass: + /* Do a data-output pass. */ + /* We need not repeat per-scan setup if prior optimization pass did it. */ + if (! cinfo->optimize_coding) { + select_scan_parameters(cinfo); + per_scan_setup(cinfo); + } + (*cinfo->entropy->start_pass) (cinfo, FALSE); + (*cinfo->coef->start_pass) (cinfo, JBUF_CRANK_DEST); + /* We emit frame/scan headers now */ + if (master->scan_number == 0) + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); + master->pub.call_pass_startup = FALSE; + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + } + + master->pub.is_last_pass = (master->pass_number == master->total_passes-1); + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->total_passes; + } +} + + +/* + * Special start-of-pass hook. + * This is called by jpeg_write_scanlines if call_pass_startup is TRUE. + * In single-pass processing, we need this hook because we don't want to + * write frame/scan headers during jpeg_start_compress; we want to let the + * application write COM markers etc. between jpeg_start_compress and the + * jpeg_write_scanlines loop. + * In multi-pass processing, this routine is not used. + */ + +METHODDEF(void) +pass_startup (j_compress_ptr cinfo) +{ + cinfo->master->call_pass_startup = FALSE; /* reset flag so call only once */ + + (*cinfo->marker->write_frame_header) (cinfo); + (*cinfo->marker->write_scan_header) (cinfo); +} + + +/* + * Finish up at end of pass. + */ + +METHODDEF(void) +finish_pass_master (j_compress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* The entropy coder always needs an end-of-pass call, + * either to analyze statistics or to flush its output buffer. + */ + (*cinfo->entropy->finish_pass) (cinfo); + + /* Update state for next pass */ + switch (master->pass_type) { + case main_pass: + /* next pass is either output of scan 0 (after optimization) + * or output of scan 1 (if no optimization). + */ + master->pass_type = output_pass; + if (! cinfo->optimize_coding) + master->scan_number++; + break; + case huff_opt_pass: + /* next pass is always output of current scan */ + master->pass_type = output_pass; + break; + case output_pass: + /* next pass is either optimization or output of next scan */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + master->scan_number++; + break; + } + + master->pass_number++; +} + + +/* + * Initialize master compression control. + */ + +GLOBAL(void) +jinit_c_master_control (j_compress_ptr cinfo, boolean transcode_only) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_comp_master)); + cinfo->master = (struct jpeg_comp_master *) master; + master->pub.prepare_for_pass = prepare_for_pass; + master->pub.pass_startup = pass_startup; + master->pub.finish_pass = finish_pass_master; + master->pub.is_last_pass = FALSE; + + /* Validate parameters, determine derived values */ + initial_setup(cinfo, transcode_only); + + if (cinfo->scan_info != NULL) { +#ifdef C_MULTISCAN_FILES_SUPPORTED + validate_script(cinfo); + if (cinfo->block_size < DCTSIZE) + reduce_script(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + cinfo->progressive_mode = FALSE; + cinfo->num_scans = 1; + } + + if ((cinfo->progressive_mode || cinfo->block_size < DCTSIZE) && + !cinfo->arith_code) /* TEMPORARY HACK ??? */ + /* assume default tables no good for progressive or downscale mode */ + cinfo->optimize_coding = TRUE; + + /* Initialize my private state */ + if (transcode_only) { + /* no main pass in transcoding */ + if (cinfo->optimize_coding) + master->pass_type = huff_opt_pass; + else + master->pass_type = output_pass; + } else { + /* for normal compression, first pass is always this type: */ + master->pass_type = main_pass; + } + master->scan_number = 0; + master->pass_number = 0; + if (cinfo->optimize_coding) + master->total_passes = cinfo->num_scans * 2; + else + master->total_passes = cinfo->num_scans; +} diff --git a/src/3rdparty/libjpeg/jcomapi.c b/src/3rdparty/libjpeg/jcomapi.c new file mode 100644 index 0000000..9b1fa75 --- /dev/null +++ b/src/3rdparty/libjpeg/jcomapi.c @@ -0,0 +1,106 @@ +/* + * jcomapi.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface routines that are used for both + * compression and decompression. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Abort processing of a JPEG compression or decompression operation, + * but don't destroy the object itself. + * + * For this, we merely clean up all the nonpermanent memory pools. + * Note that temp files (virtual arrays) are not allowed to belong to + * the permanent pool, so we will be able to close all temp files here. + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_abort (j_common_ptr cinfo) +{ + int pool; + + /* Do nothing if called on a not-initialized or destroyed JPEG object. */ + if (cinfo->mem == NULL) + return; + + /* Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool > JPOOL_PERMANENT; pool--) { + (*cinfo->mem->free_pool) (cinfo, pool); + } + + /* Reset overall state for possible reuse of object */ + if (cinfo->is_decompressor) { + cinfo->global_state = DSTATE_START; + /* Try to keep application from accessing now-deleted marker list. + * A bit kludgy to do it here, but this is the most central place. + */ + ((j_decompress_ptr) cinfo)->marker_list = NULL; + } else { + cinfo->global_state = CSTATE_START; + } +} + + +/* + * Destruction of a JPEG object. + * + * Everything gets deallocated except the master jpeg_compress_struct itself + * and the error manager struct. Both of these are supplied by the application + * and must be freed, if necessary, by the application. (Often they are on + * the stack and so don't need to be freed anyway.) + * Closing a data source or destination, if necessary, is the application's + * responsibility. + */ + +GLOBAL(void) +jpeg_destroy (j_common_ptr cinfo) +{ + /* We need only tell the memory manager to release everything. */ + /* NB: mem pointer is NULL if memory mgr failed to initialize. */ + if (cinfo->mem != NULL) + (*cinfo->mem->self_destruct) (cinfo); + cinfo->mem = NULL; /* be safe if jpeg_destroy is called twice */ + cinfo->global_state = 0; /* mark it destroyed */ +} + + +/* + * Convenience routines for allocating quantization and Huffman tables. + * (Would jutils.c be a more reasonable place to put these?) + */ + +GLOBAL(JQUANT_TBL *) +jpeg_alloc_quant_table (j_common_ptr cinfo) +{ + JQUANT_TBL *tbl; + + tbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JQUANT_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} + + +GLOBAL(JHUFF_TBL *) +jpeg_alloc_huff_table (j_common_ptr cinfo) +{ + JHUFF_TBL *tbl; + + tbl = (JHUFF_TBL *) + (*cinfo->mem->alloc_small) (cinfo, JPOOL_PERMANENT, SIZEOF(JHUFF_TBL)); + tbl->sent_table = FALSE; /* make sure this is false in any new table */ + return tbl; +} diff --git a/src/3rdparty/libjpeg/jconfig.bcc b/src/3rdparty/libjpeg/jconfig.bcc new file mode 100644 index 0000000..e4da3d7 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.bcc @@ -0,0 +1,48 @@ +/* jconfig.bcc --- jconfig.h for Borland C (Turbo C) on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#ifdef __MSDOS__ +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#endif +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN /* this assumes you have -w-stu in CFLAGS */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#ifdef __MSDOS__ +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ +#define USE_FMEM /* Borland has _fmemcpy() and _fmemset() */ +#endif + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Borland has setmode() */ +#ifdef __MSDOS__ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#endif +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.cfg b/src/3rdparty/libjpeg/jconfig.cfg new file mode 100644 index 0000000..a23758a --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.cfg @@ -0,0 +1,45 @@ +/* jconfig.cfg --- source file edited by configure script */ +/* see jconfig.txt for explanations */ + +#undef HAVE_PROTOTYPES +#undef HAVE_UNSIGNED_CHAR +#undef HAVE_UNSIGNED_SHORT +#undef void +#undef const +#undef CHAR_IS_UNSIGNED +#undef HAVE_STDDEF_H +#undef HAVE_STDLIB_H +#undef HAVE_LOCALE_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +/* Define this if you get warnings about undefined structures. */ +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED +#undef INLINE +/* These are for configuring the JPEG memory manager. */ +#undef DEFAULT_MAX_MEM +#undef NO_MKTEMP + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. */ +#undef PROGRESS_REPORT + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.dj b/src/3rdparty/libjpeg/jconfig.dj new file mode 100644 index 0000000..a0d4092 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.dj @@ -0,0 +1,38 @@ +/* jconfig.dj --- jconfig.h for DJGPP (Delorie's GNU C port) on MS-DOS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* DJGPP uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in DJGPP */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.mac b/src/3rdparty/libjpeg/jconfig.mac new file mode 100644 index 0000000..70ed66c --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.mac @@ -0,0 +1,43 @@ +/* jconfig.mac --- jconfig.h for CodeWarrior on Apple Macintosh */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MAC_MEMMGR /* Define this if you use jmemmac.c */ + +#define ALIGN_TYPE long /* Needed for 680x0 Macs */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define USE_CCOMMAND /* Command line reader for Macintosh */ +#define TWO_FILE_COMMANDLINE /* Binary I/O thru stdin/stdout doesn't work */ + +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.manx b/src/3rdparty/libjpeg/jconfig.manx new file mode 100644 index 0000000..cd529d7 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.manx @@ -0,0 +1,43 @@ +/* jconfig.manx --- jconfig.h for Amiga systems using Manx Aztec C ver 5.x. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define SHORTxSHORT_32 /* produces better DCT code with Aztec C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#define signal_catcher _abort /* hack for Aztec C naming requirements */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.mc6 b/src/3rdparty/libjpeg/jconfig.mc6 new file mode 100644 index 0000000..1b18523 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.mc6 @@ -0,0 +1,52 @@ +/* jconfig.mc6 --- jconfig.h for Microsoft C on MS-DOS, version 6.00A & up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#define NEED_FAR_POINTERS /* for small or medium memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define USE_MSDOS_MEMMGR /* Define this if you use jmemdos.c */ + +#define MAX_ALLOC_CHUNK 65520L /* Maximum request to malloc() */ + +#define USE_FMEM /* Microsoft has _fmemcpy() and _fmemset() */ + +#define NEED_FHEAPMIN /* far heap management routines are broken */ + +#define SHORTxLCONST_32 /* enable compiler-specific DCT optimization */ +/* Note: the above define is known to improve the code with Microsoft C 6.00A. + * I do not know whether it is good for later compiler versions. + * Please report any info on this point to jpeg-info@uunet.uu.net. + */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define USE_SETMODE /* Microsoft has setmode() */ +#define NEED_SIGNAL_CATCHER /* Define this if you use jmemdos.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.sas b/src/3rdparty/libjpeg/jconfig.sas new file mode 100644 index 0000000..b8a1819 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.sas @@ -0,0 +1,43 @@ +/* jconfig.sas --- jconfig.h for Amiga systems using SAS C 6.0 and up. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define TEMP_DIRECTORY "JPEGTMP:" /* recommended setting for Amiga */ + +#define NO_MKTEMP /* SAS C doesn't have mktemp() */ + +#define SHORTxSHORT_32 /* produces better DCT code with SAS C */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE +#define NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.st b/src/3rdparty/libjpeg/jconfig.st new file mode 100644 index 0000000..5afa0b6 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.st @@ -0,0 +1,42 @@ +/* jconfig.st --- jconfig.h for Atari ST/STE/TT using Pure C or Turbo C. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#define INCOMPLETE_TYPES_BROKEN /* suppress undefined-structure warnings */ + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#define ALIGN_TYPE long /* apparently double is a weird size? */ + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional -- undef if you like Unix style */ +/* Note: if you undef TWO_FILE_COMMANDLINE, you may need to define + * USE_SETMODE. Some Atari compilers require it, some do not. + */ +#define NEED_SIGNAL_CATCHER /* needed if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.txt b/src/3rdparty/libjpeg/jconfig.txt new file mode 100644 index 0000000..8819e79 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.txt @@ -0,0 +1,155 @@ +/* + * jconfig.txt + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file documents the configuration options that are required to + * customize the JPEG software for a particular system. + * + * The actual configuration options for a particular installation are stored + * in jconfig.h. On many machines, jconfig.h can be generated automatically + * or copied from one of the "canned" jconfig files that we supply. But if + * you need to generate a jconfig.h file by hand, this file tells you how. + * + * DO NOT EDIT THIS FILE --- IT WON'T ACCOMPLISH ANYTHING. + * EDIT A COPY NAMED JCONFIG.H. + */ + + +/* + * These symbols indicate the properties of your machine or compiler. + * #define the symbol if yes, #undef it if no. + */ + +/* Does your compiler support function prototypes? + * (If not, you also need to use ansi2knr, see install.txt) + */ +#define HAVE_PROTOTYPES + +/* Does your compiler support the declaration "unsigned char" ? + * How about "unsigned short" ? + */ +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT + +/* Define "void" as "char" if your compiler doesn't know about type void. + * NOTE: be sure to define void such that "void *" represents the most general + * pointer type, e.g., that returned by malloc(). + */ +/* #define void char */ + +/* Define "const" as empty if your compiler doesn't know the "const" keyword. + */ +/* #define const */ + +/* Define this if an ordinary "char" type is unsigned. + * If you're not sure, leaving it undefined will work at some cost in speed. + * If you defined HAVE_UNSIGNED_CHAR then the speed difference is minimal. + */ +#undef CHAR_IS_UNSIGNED + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDDEF_H + +/* Define this if your system has an ANSI-conforming file. + */ +#define HAVE_STDLIB_H + +/* Define this if your system does not have an ANSI/SysV , + * but does have a BSD-style . + */ +#undef NEED_BSD_STRINGS + +/* Define this if your system does not provide typedef size_t in any of the + * ANSI-standard places (stddef.h, stdlib.h, or stdio.h), but places it in + * instead. + */ +#undef NEED_SYS_TYPES_H + +/* For 80x86 machines, you need to define NEED_FAR_POINTERS, + * unless you are using a large-data memory model or 80386 flat-memory mode. + * On less brain-damaged CPUs this symbol must not be defined. + * (Defining this symbol causes large data structures to be referenced through + * "far" pointers and to be allocated with a special version of malloc.) + */ +#undef NEED_FAR_POINTERS + +/* Define this if your linker needs global names to be unique in less + * than the first 15 characters. + */ +#undef NEED_SHORT_EXTERNAL_NAMES + +/* Although a real ANSI C compiler can deal perfectly well with pointers to + * unspecified structures (see "incomplete types" in the spec), a few pre-ANSI + * and pseudo-ANSI compilers get confused. To keep one of these bozos happy, + * define INCOMPLETE_TYPES_BROKEN. This is not recommended unless you + * actually get "missing structure definition" warnings or errors while + * compiling the JPEG code. + */ +#undef INCOMPLETE_TYPES_BROKEN + + +/* + * The following options affect code selection within the JPEG library, + * but they don't need to be visible to applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS has been defined. + */ + +#ifdef JPEG_INTERNALS + +/* Define this if your compiler implements ">>" on signed values as a logical + * (unsigned) shift; leave it undefined if ">>" is a signed (arithmetic) shift, + * which is the normal and rational definition. + */ +#undef RIGHT_SHIFT_IS_UNSIGNED + + +#endif /* JPEG_INTERNALS */ + + +/* + * The remaining options do not affect the JPEG library proper, + * but only the sample applications cjpeg/djpeg (see cjpeg.c, djpeg.c). + * Other applications can ignore these. + */ + +#ifdef JPEG_CJPEG_DJPEG + +/* These defines indicate which image (non-JPEG) file formats are allowed. */ + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +/* Define this if you want to name both input and output files on the command + * line, rather than using stdout and optionally stdin. You MUST do this if + * your system can't cope with binary I/O to stdin/stdout. See comments at + * head of cjpeg.c or djpeg.c. + */ +#undef TWO_FILE_COMMANDLINE + +/* Define this if your system needs explicit cleanup of temporary files. + * This is crucial under MS-DOS, where the temporary "files" may be areas + * of extended memory; on most other systems it's not as important. + */ +#undef NEED_SIGNAL_CATCHER + +/* By default, we open image files with fopen(...,"rb") or fopen(...,"wb"). + * This is necessary on systems that distinguish text files from binary files, + * and is harmless on most systems that don't. If you have one of the rare + * systems that complains about the "b" spec, define this symbol. + */ +#undef DONT_USE_B_MODE + +/* Define this if you want percent-done progress reports from cjpeg/djpeg. + */ +#undef PROGRESS_REPORT + + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.vc b/src/3rdparty/libjpeg/jconfig.vc new file mode 100644 index 0000000..679404d --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.vc @@ -0,0 +1,45 @@ +/* jconfig.vc --- jconfig.h for Microsoft Visual C++ on Windows 95 or NT. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* we presume a 32-bit flat memory model */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +/* Define "boolean" as unsigned char, not int, per Windows custom */ +#ifndef __RPCNDR_H__ /* don't conflict if rpcndr.h already read */ +typedef unsigned char boolean; +#endif +#define HAVE_BOOLEAN /* prevent jmorecfg.h from redefining it */ + + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Microsoft has setmode() */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.vms b/src/3rdparty/libjpeg/jconfig.vms new file mode 100644 index 0000000..8337b0b --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.vms @@ -0,0 +1,37 @@ +/* jconfig.vms --- jconfig.h for use on Digital VMS. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#undef CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#define TWO_FILE_COMMANDLINE /* Needed on VMS */ +#undef NEED_SIGNAL_CATCHER +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jconfig.wat b/src/3rdparty/libjpeg/jconfig.wat new file mode 100644 index 0000000..190cc75 --- /dev/null +++ b/src/3rdparty/libjpeg/jconfig.wat @@ -0,0 +1,38 @@ +/* jconfig.wat --- jconfig.h for Watcom C/C++ on MS-DOS or OS/2. */ +/* see jconfig.txt for explanations */ + +#define HAVE_PROTOTYPES +#define HAVE_UNSIGNED_CHAR +#define HAVE_UNSIGNED_SHORT +/* #define void char */ +/* #define const */ +#define CHAR_IS_UNSIGNED +#define HAVE_STDDEF_H +#define HAVE_STDLIB_H +#undef NEED_BSD_STRINGS +#undef NEED_SYS_TYPES_H +#undef NEED_FAR_POINTERS /* Watcom uses flat 32-bit addressing */ +#undef NEED_SHORT_EXTERNAL_NAMES +#undef INCOMPLETE_TYPES_BROKEN + +#ifdef JPEG_INTERNALS + +#undef RIGHT_SHIFT_IS_UNSIGNED + +#endif /* JPEG_INTERNALS */ + +#ifdef JPEG_CJPEG_DJPEG + +#define BMP_SUPPORTED /* BMP image file format */ +#define GIF_SUPPORTED /* GIF image file format */ +#define PPM_SUPPORTED /* PBMPLUS PPM/PGM image file format */ +#undef RLE_SUPPORTED /* Utah RLE image file format */ +#define TARGA_SUPPORTED /* Targa image file format */ + +#undef TWO_FILE_COMMANDLINE /* optional */ +#define USE_SETMODE /* Needed to make one-file style work in Watcom */ +#undef NEED_SIGNAL_CATCHER /* Define this if you use jmemname.c */ +#undef DONT_USE_B_MODE +#undef PROGRESS_REPORT /* optional */ + +#endif /* JPEG_CJPEG_DJPEG */ diff --git a/src/3rdparty/libjpeg/jcparam.c b/src/3rdparty/libjpeg/jcparam.c new file mode 100644 index 0000000..c5e85dd --- /dev/null +++ b/src/3rdparty/libjpeg/jcparam.c @@ -0,0 +1,632 @@ +/* + * jcparam.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2003-2008 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains optional default-setting code for the JPEG compressor. + * Applications do not have to use this file, but those that don't use it + * must know a lot more about the innards of the JPEG code. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Quantization table setup routines + */ + +GLOBAL(void) +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) +/* Define a quantization table equal to the basic_table times + * a scale factor (given as a percentage). + * If force_baseline is TRUE, the computed quantization table entries + * are limited to 1..255 for JPEG baseline compatibility. + */ +{ + JQUANT_TBL ** qtblptr; + int i; + long temp; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (which_tbl < 0 || which_tbl >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, which_tbl); + + qtblptr = & cinfo->quant_tbl_ptrs[which_tbl]; + + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) cinfo); + + for (i = 0; i < DCTSIZE2; i++) { + temp = ((long) basic_table[i] * scale_factor + 50L) / 100L; + /* limit the values to the valid range */ + if (temp <= 0L) temp = 1L; + if (temp > 32767L) temp = 32767L; /* max quantizer needed for 12 bits */ + if (force_baseline && temp > 255L) + temp = 255L; /* limit to baseline range if requested */ + (*qtblptr)->quantval[i] = (UINT16) temp; + } + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*qtblptr)->sent_table = FALSE; +} + + +/* These are the sample quantization tables given in JPEG spec section K.1. + * The spec says that the values given produce "good" quality, and + * when divided by 2, "very good" quality. + */ +static const unsigned int std_luminance_quant_tbl[DCTSIZE2] = { + 16, 11, 10, 16, 24, 40, 51, 61, + 12, 12, 14, 19, 26, 58, 60, 55, + 14, 13, 16, 24, 40, 57, 69, 56, + 14, 17, 22, 29, 51, 87, 80, 62, + 18, 22, 37, 56, 68, 109, 103, 77, + 24, 35, 55, 64, 81, 104, 113, 92, + 49, 64, 78, 87, 103, 121, 120, 101, + 72, 92, 95, 98, 112, 100, 103, 99 +}; +static const unsigned int std_chrominance_quant_tbl[DCTSIZE2] = { + 17, 18, 24, 47, 99, 99, 99, 99, + 18, 21, 26, 66, 99, 99, 99, 99, + 24, 26, 56, 99, 99, 99, 99, 99, + 47, 66, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99, + 99, 99, 99, 99, 99, 99, 99, 99 +}; + + +GLOBAL(void) +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and straight percentage-scaling quality scales. + * This entry point allows different scalings for luminance and chrominance. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + cinfo->q_scale_factor[0], force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + cinfo->q_scale_factor[1], force_baseline); +} + + +GLOBAL(void) +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables + * and a straight percentage-scaling quality scale. In most cases it's better + * to use jpeg_set_quality (below); this entry point is provided for + * applications that insist on a linear percentage scaling. + */ +{ + /* Set up two quantization tables using the specified scaling */ + jpeg_add_quant_table(cinfo, 0, std_luminance_quant_tbl, + scale_factor, force_baseline); + jpeg_add_quant_table(cinfo, 1, std_chrominance_quant_tbl, + scale_factor, force_baseline); +} + + +GLOBAL(int) +jpeg_quality_scaling (int quality) +/* Convert a user-specified quality rating to a percentage scaling factor + * for an underlying quantization table, using our recommended scaling curve. + * The input 'quality' factor should be 0 (terrible) to 100 (very good). + */ +{ + /* Safety limit on quality factor. Convert 0 to 1 to avoid zero divide. */ + if (quality <= 0) quality = 1; + if (quality > 100) quality = 100; + + /* The basic table is used as-is (scaling 100) for a quality of 50. + * Qualities 50..100 are converted to scaling percentage 200 - 2*Q; + * note that at Q=100 the scaling is 0, which will cause jpeg_add_quant_table + * to make all the table entries 1 (hence, minimum quantization loss). + * Qualities 1..50 are converted to scaling percentage 5000/Q. + */ + if (quality < 50) + quality = 5000 / quality; + else + quality = 200 - quality*2; + + return quality; +} + + +GLOBAL(void) +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) +/* Set or change the 'quality' (quantization) setting, using default tables. + * This is the standard quality-adjusting entry point for typical user + * interfaces; only those who want detailed control over quantization tables + * would use the preceding three routines directly. + */ +{ + /* Convert user 0-100 rating to percentage scaling */ + quality = jpeg_quality_scaling(quality); + + /* Set up standard quality tables */ + jpeg_set_linear_quality(cinfo, quality, force_baseline); +} + + +/* + * Huffman table setup routines + */ + +LOCAL(void) +add_huff_table (j_compress_ptr cinfo, + JHUFF_TBL **htblptr, const UINT8 *bits, const UINT8 *val) +/* Define a Huffman table */ +{ + int nsymbols, len; + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + /* Copy the number-of-symbols-of-each-code-length counts */ + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + + /* Validate the counts. We do this here mainly so we can copy the right + * number of symbols from the val[] array, without risking marching off + * the end of memory. jchuff.c will do a more thorough test later. + */ + nsymbols = 0; + for (len = 1; len <= 16; len++) + nsymbols += bits[len]; + if (nsymbols < 1 || nsymbols > 256) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + MEMCOPY((*htblptr)->huffval, val, nsymbols * SIZEOF(UINT8)); + + /* Initialize sent_table FALSE so table will be written to JPEG file. */ + (*htblptr)->sent_table = FALSE; +} + + +LOCAL(void) +std_huff_tables (j_compress_ptr cinfo) +/* Set up the standard Huffman tables (cf. JPEG standard section K.3) */ +/* IMPORTANT: these are only valid for 8-bit data precision! */ +{ + static const UINT8 bits_dc_luminance[17] = + { /* 0-base */ 0, 0, 1, 5, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_luminance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_dc_chrominance[17] = + { /* 0-base */ 0, 0, 3, 1, 1, 1, 1, 1, 1, 1, 1, 1, 0, 0, 0, 0, 0 }; + static const UINT8 val_dc_chrominance[] = + { 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 }; + + static const UINT8 bits_ac_luminance[17] = + { /* 0-base */ 0, 0, 2, 1, 3, 3, 2, 4, 3, 5, 5, 4, 4, 0, 0, 1, 0x7d }; + static const UINT8 val_ac_luminance[] = + { 0x01, 0x02, 0x03, 0x00, 0x04, 0x11, 0x05, 0x12, + 0x21, 0x31, 0x41, 0x06, 0x13, 0x51, 0x61, 0x07, + 0x22, 0x71, 0x14, 0x32, 0x81, 0x91, 0xa1, 0x08, + 0x23, 0x42, 0xb1, 0xc1, 0x15, 0x52, 0xd1, 0xf0, + 0x24, 0x33, 0x62, 0x72, 0x82, 0x09, 0x0a, 0x16, + 0x17, 0x18, 0x19, 0x1a, 0x25, 0x26, 0x27, 0x28, + 0x29, 0x2a, 0x34, 0x35, 0x36, 0x37, 0x38, 0x39, + 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, 0x49, + 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, 0x59, + 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, 0x69, + 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, 0x79, + 0x7a, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, + 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, 0x97, 0x98, + 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, + 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, 0xb5, 0xb6, + 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, 0xc4, 0xc5, + 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, 0xd3, 0xd4, + 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, 0xe1, 0xe2, + 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, 0xea, + 0xf1, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + static const UINT8 bits_ac_chrominance[17] = + { /* 0-base */ 0, 0, 2, 1, 2, 4, 4, 3, 4, 7, 5, 4, 4, 0, 1, 2, 0x77 }; + static const UINT8 val_ac_chrominance[] = + { 0x00, 0x01, 0x02, 0x03, 0x11, 0x04, 0x05, 0x21, + 0x31, 0x06, 0x12, 0x41, 0x51, 0x07, 0x61, 0x71, + 0x13, 0x22, 0x32, 0x81, 0x08, 0x14, 0x42, 0x91, + 0xa1, 0xb1, 0xc1, 0x09, 0x23, 0x33, 0x52, 0xf0, + 0x15, 0x62, 0x72, 0xd1, 0x0a, 0x16, 0x24, 0x34, + 0xe1, 0x25, 0xf1, 0x17, 0x18, 0x19, 0x1a, 0x26, + 0x27, 0x28, 0x29, 0x2a, 0x35, 0x36, 0x37, 0x38, + 0x39, 0x3a, 0x43, 0x44, 0x45, 0x46, 0x47, 0x48, + 0x49, 0x4a, 0x53, 0x54, 0x55, 0x56, 0x57, 0x58, + 0x59, 0x5a, 0x63, 0x64, 0x65, 0x66, 0x67, 0x68, + 0x69, 0x6a, 0x73, 0x74, 0x75, 0x76, 0x77, 0x78, + 0x79, 0x7a, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, + 0x88, 0x89, 0x8a, 0x92, 0x93, 0x94, 0x95, 0x96, + 0x97, 0x98, 0x99, 0x9a, 0xa2, 0xa3, 0xa4, 0xa5, + 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xb2, 0xb3, 0xb4, + 0xb5, 0xb6, 0xb7, 0xb8, 0xb9, 0xba, 0xc2, 0xc3, + 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xd2, + 0xd3, 0xd4, 0xd5, 0xd6, 0xd7, 0xd8, 0xd9, 0xda, + 0xe2, 0xe3, 0xe4, 0xe5, 0xe6, 0xe7, 0xe8, 0xe9, + 0xea, 0xf2, 0xf3, 0xf4, 0xf5, 0xf6, 0xf7, 0xf8, + 0xf9, 0xfa }; + + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[0], + bits_dc_luminance, val_dc_luminance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[0], + bits_ac_luminance, val_ac_luminance); + add_huff_table(cinfo, &cinfo->dc_huff_tbl_ptrs[1], + bits_dc_chrominance, val_dc_chrominance); + add_huff_table(cinfo, &cinfo->ac_huff_tbl_ptrs[1], + bits_ac_chrominance, val_ac_chrominance); +} + + +/* + * Default parameter setup for compression. + * + * Applications that don't choose to use this routine must do their + * own setup of all these parameters. Alternately, you can call this + * to establish defaults and then alter parameters selectively. This + * is the recommended approach since, if we add any new parameters, + * your code will still work (they'll be set to reasonable defaults). + */ + +GLOBAL(void) +jpeg_set_defaults (j_compress_ptr cinfo) +{ + int i; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Allocate comp_info array large enough for maximum component count. + * Array is made permanent in case application wants to compress + * multiple images at same param settings. + */ + if (cinfo->comp_info == NULL) + cinfo->comp_info = (jpeg_component_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + MAX_COMPONENTS * SIZEOF(jpeg_component_info)); + + /* Initialize everything not dependent on the color space */ + + cinfo->scale_num = 1; /* 1:1 scaling */ + cinfo->scale_denom = 1; + cinfo->data_precision = BITS_IN_JSAMPLE; + /* Set up two quantization tables using default quality of 75 */ + jpeg_set_quality(cinfo, 75, TRUE); + /* Set up two Huffman tables */ + std_huff_tables(cinfo); + + /* Initialize default arithmetic coding conditioning */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + + /* Default is no multiple-scan output */ + cinfo->scan_info = NULL; + cinfo->num_scans = 0; + + /* Expect normal source image, not raw downsampled data */ + cinfo->raw_data_in = FALSE; + + /* Use Huffman coding, not arithmetic coding, by default */ + cinfo->arith_code = FALSE; + + /* By default, don't do extra passes to optimize entropy coding */ + cinfo->optimize_coding = FALSE; + /* The standard Huffman tables are only valid for 8-bit data precision. + * If the precision is higher, force optimization on so that usable + * tables will be computed. This test can be removed if default tables + * are supplied that are valid for the desired precision. + */ + if (cinfo->data_precision > 8) + cinfo->optimize_coding = TRUE; + + /* By default, use the simpler non-cosited sampling alignment */ + cinfo->CCIR601_sampling = FALSE; + + /* By default, apply fancy downsampling */ + cinfo->do_fancy_downsampling = TRUE; + + /* No input smoothing */ + cinfo->smoothing_factor = 0; + + /* DCT algorithm preference */ + cinfo->dct_method = JDCT_DEFAULT; + + /* No restart markers */ + cinfo->restart_interval = 0; + cinfo->restart_in_rows = 0; + + /* Fill in default JFIF marker parameters. Note that whether the marker + * will actually be written is determined by jpeg_set_colorspace. + * + * By default, the library emits JFIF version code 1.01. + * An application that wants to emit JFIF 1.02 extension markers should set + * JFIF_minor_version to 2. We could probably get away with just defaulting + * to 1.02, but there may still be some decoders in use that will complain + * about that; saying 1.01 should minimize compatibility problems. + */ + cinfo->JFIF_major_version = 1; /* Default JFIF version = 1.01 */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; /* Pixel size is unknown by default */ + cinfo->X_density = 1; /* Pixel aspect ratio is square by default */ + cinfo->Y_density = 1; + + /* Choose JPEG colorspace based on input space, set defaults accordingly */ + + jpeg_default_colorspace(cinfo); +} + + +/* + * Select an appropriate JPEG colorspace for in_color_space. + */ + +GLOBAL(void) +jpeg_default_colorspace (j_compress_ptr cinfo) +{ + switch (cinfo->in_color_space) { + case JCS_GRAYSCALE: + jpeg_set_colorspace(cinfo, JCS_GRAYSCALE); + break; + case JCS_RGB: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_YCbCr: + jpeg_set_colorspace(cinfo, JCS_YCbCr); + break; + case JCS_CMYK: + jpeg_set_colorspace(cinfo, JCS_CMYK); /* By default, no translation */ + break; + case JCS_YCCK: + jpeg_set_colorspace(cinfo, JCS_YCCK); + break; + case JCS_UNKNOWN: + jpeg_set_colorspace(cinfo, JCS_UNKNOWN); + break; + default: + ERREXIT(cinfo, JERR_BAD_IN_COLORSPACE); + } +} + + +/* + * Set the JPEG colorspace, and choose colorspace-dependent default values. + */ + +GLOBAL(void) +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) +{ + jpeg_component_info * compptr; + int ci; + +#define SET_COMP(index,id,hsamp,vsamp,quant,dctbl,actbl) \ + (compptr = &cinfo->comp_info[index], \ + compptr->component_id = (id), \ + compptr->h_samp_factor = (hsamp), \ + compptr->v_samp_factor = (vsamp), \ + compptr->quant_tbl_no = (quant), \ + compptr->dc_tbl_no = (dctbl), \ + compptr->ac_tbl_no = (actbl) ) + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* For all colorspaces, we use Q and Huff tables 0 for luminance components, + * tables 1 for chrominance components. + */ + + cinfo->jpeg_color_space = colorspace; + + cinfo->write_JFIF_header = FALSE; /* No marker for non-JFIF colorspaces */ + cinfo->write_Adobe_marker = FALSE; /* write no Adobe marker by default */ + + switch (colorspace) { + case JCS_GRAYSCALE: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 1; + /* JFIF specifies component ID 1 */ + SET_COMP(0, 1, 1,1, 0, 0,0); + break; + case JCS_RGB: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag RGB */ + cinfo->num_components = 3; + SET_COMP(0, 0x52 /* 'R' */, 1,1, 0, 0,0); + SET_COMP(1, 0x47 /* 'G' */, 1,1, 0, 0,0); + SET_COMP(2, 0x42 /* 'B' */, 1,1, 0, 0,0); + break; + case JCS_YCbCr: + cinfo->write_JFIF_header = TRUE; /* Write a JFIF marker */ + cinfo->num_components = 3; + /* JFIF specifies component IDs 1,2,3 */ + /* We default to 2x2 subsamples of chrominance */ + SET_COMP(0, 1, 2,2, 0, 0,0); + SET_COMP(1, 2, 1,1, 1, 1,1); + SET_COMP(2, 3, 1,1, 1, 1,1); + break; + case JCS_CMYK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag CMYK */ + cinfo->num_components = 4; + SET_COMP(0, 0x43 /* 'C' */, 1,1, 0, 0,0); + SET_COMP(1, 0x4D /* 'M' */, 1,1, 0, 0,0); + SET_COMP(2, 0x59 /* 'Y' */, 1,1, 0, 0,0); + SET_COMP(3, 0x4B /* 'K' */, 1,1, 0, 0,0); + break; + case JCS_YCCK: + cinfo->write_Adobe_marker = TRUE; /* write Adobe marker to flag YCCK */ + cinfo->num_components = 4; + SET_COMP(0, 1, 2,2, 0, 0,0); + SET_COMP(1, 2, 1,1, 1, 1,1); + SET_COMP(2, 3, 1,1, 1, 1,1); + SET_COMP(3, 4, 2,2, 0, 0,0); + break; + case JCS_UNKNOWN: + cinfo->num_components = cinfo->input_components; + if (cinfo->num_components < 1 || cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + for (ci = 0; ci < cinfo->num_components; ci++) { + SET_COMP(ci, ci, 1,1, 0, 0,0); + } + break; + default: + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + } +} + + +#ifdef C_PROGRESSIVE_SUPPORTED + +LOCAL(jpeg_scan_info *) +fill_a_scan (jpeg_scan_info * scanptr, int ci, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for specified component */ +{ + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_scans (jpeg_scan_info * scanptr, int ncomps, + int Ss, int Se, int Ah, int Al) +/* Support routine: generate one scan for each component */ +{ + int ci; + + for (ci = 0; ci < ncomps; ci++) { + scanptr->comps_in_scan = 1; + scanptr->component_index[0] = ci; + scanptr->Ss = Ss; + scanptr->Se = Se; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } + return scanptr; +} + +LOCAL(jpeg_scan_info *) +fill_dc_scans (jpeg_scan_info * scanptr, int ncomps, int Ah, int Al) +/* Support routine: generate interleaved DC scan if possible, else N scans */ +{ + int ci; + + if (ncomps <= MAX_COMPS_IN_SCAN) { + /* Single interleaved DC scan */ + scanptr->comps_in_scan = ncomps; + for (ci = 0; ci < ncomps; ci++) + scanptr->component_index[ci] = ci; + scanptr->Ss = scanptr->Se = 0; + scanptr->Ah = Ah; + scanptr->Al = Al; + scanptr++; + } else { + /* Noninterleaved DC scan for each component */ + scanptr = fill_scans(scanptr, ncomps, 0, 0, Ah, Al); + } + return scanptr; +} + + +/* + * Create a recommended progressive-JPEG script. + * cinfo->num_components and cinfo->jpeg_color_space must be correct. + */ + +GLOBAL(void) +jpeg_simple_progression (j_compress_ptr cinfo) +{ + int ncomps = cinfo->num_components; + int nscans; + jpeg_scan_info * scanptr; + + /* Safety check to ensure start_compress not called yet. */ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Figure space needed for script. Calculation must match code below! */ + if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { + /* Custom script for YCbCr color images. */ + nscans = 10; + } else { + /* All-purpose script for other color spaces. */ + if (ncomps > MAX_COMPS_IN_SCAN) + nscans = 6 * ncomps; /* 2 DC + 4 AC scans per component */ + else + nscans = 2 + 4 * ncomps; /* 2 DC scans; 4 AC scans per component */ + } + + /* Allocate space for script. + * We need to put it in the permanent pool in case the application performs + * multiple compressions without changing the settings. To avoid a memory + * leak if jpeg_simple_progression is called repeatedly for the same JPEG + * object, we try to re-use previously allocated space, and we allocate + * enough space to handle YCbCr even if initially asked for grayscale. + */ + if (cinfo->script_space == NULL || cinfo->script_space_size < nscans) { + cinfo->script_space_size = MAX(nscans, 10); + cinfo->script_space = (jpeg_scan_info *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + cinfo->script_space_size * SIZEOF(jpeg_scan_info)); + } + scanptr = cinfo->script_space; + cinfo->scan_info = scanptr; + cinfo->num_scans = nscans; + + if (ncomps == 3 && cinfo->jpeg_color_space == JCS_YCbCr) { + /* Custom script for YCbCr color images. */ + /* Initial DC scan */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + /* Initial AC scan: get some luma data out in a hurry */ + scanptr = fill_a_scan(scanptr, 0, 1, 5, 0, 2); + /* Chroma data is too small to be worth expending many scans on */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 0, 1); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 0, 1); + /* Complete spectral selection for luma AC */ + scanptr = fill_a_scan(scanptr, 0, 6, 63, 0, 2); + /* Refine next bit of luma AC */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 2, 1); + /* Finish DC successive approximation */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + /* Finish AC successive approximation */ + scanptr = fill_a_scan(scanptr, 2, 1, 63, 1, 0); + scanptr = fill_a_scan(scanptr, 1, 1, 63, 1, 0); + /* Luma bottom bit comes last since it's usually largest scan */ + scanptr = fill_a_scan(scanptr, 0, 1, 63, 1, 0); + } else { + /* All-purpose script for other color spaces. */ + /* Successive approximation first pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 0, 1); + scanptr = fill_scans(scanptr, ncomps, 1, 5, 0, 2); + scanptr = fill_scans(scanptr, ncomps, 6, 63, 0, 2); + /* Successive approximation second pass */ + scanptr = fill_scans(scanptr, ncomps, 1, 63, 2, 1); + /* Successive approximation final pass */ + scanptr = fill_dc_scans(scanptr, ncomps, 1, 0); + scanptr = fill_scans(scanptr, ncomps, 1, 63, 1, 0); + } +} + +#endif /* C_PROGRESSIVE_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jcprepct.c b/src/3rdparty/libjpeg/jcprepct.c new file mode 100644 index 0000000..be44cc4 --- /dev/null +++ b/src/3rdparty/libjpeg/jcprepct.c @@ -0,0 +1,358 @@ +/* + * jcprepct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the compression preprocessing controller. + * This controller manages the color conversion, downsampling, + * and edge expansion steps. + * + * Most of the complexity here is associated with buffering input rows + * as required by the downsampler. See the comments at the head of + * jcsample.c for the downsampler's needs. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* At present, jcsample.c can request context rows only for smoothing. + * In the future, we might also need context rows for CCIR601 sampling + * or other more-complex downsampling procedures. The code to support + * context rows should be compiled only if needed. + */ +#ifdef INPUT_SMOOTHING_SUPPORTED +#define CONTEXT_ROWS_SUPPORTED +#endif + + +/* + * For the simple (no-context-row) case, we just need to buffer one + * row group's worth of pixels for the downsampling step. At the bottom of + * the image, we pad to a full row group by replicating the last pixel row. + * The downsampler's last output row is then replicated if needed to pad + * out to a full iMCU row. + * + * When providing context rows, we must buffer three row groups' worth of + * pixels. Three row groups are physically allocated, but the row pointer + * arrays are made five row groups high, with the extra pointers above and + * below "wrapping around" to point to the last and first real row groups. + * This allows the downsampler to access the proper context rows. + * At the top and bottom of the image, we create dummy context rows by + * copying the first or last real pixel row. This copying could be avoided + * by pointer hacking as is done in jdmainct.c, but it doesn't seem worth the + * trouble on the compression side. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_prep_controller pub; /* public fields */ + + /* Downsampling input buffer. This buffer holds color-converted data + * until we have enough to do a downsample step. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + JDIMENSION rows_to_go; /* counts rows remaining in source image */ + int next_buf_row; /* index of next row to store in color_buf */ + +#ifdef CONTEXT_ROWS_SUPPORTED /* only needed for context case */ + int this_row_group; /* starting row index of group to process */ + int next_buf_stop; /* downsample when we reach this index */ +#endif +} my_prep_controller; + +typedef my_prep_controller * my_prep_ptr; + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_prep (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + + if (pass_mode != JBUF_PASS_THRU) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Initialize total-height counter for detecting bottom of image */ + prep->rows_to_go = cinfo->image_height; + /* Mark the conversion buffer empty */ + prep->next_buf_row = 0; +#ifdef CONTEXT_ROWS_SUPPORTED + /* Preset additional state variables for context mode. + * These aren't used in non-context mode, so we needn't test which mode. + */ + prep->this_row_group = 0; + /* Set next_buf_stop to stop after two row groups have been read in. */ + prep->next_buf_stop = 2 * cinfo->max_v_samp_factor; +#endif +} + + +/* + * Expand an image vertically from height input_rows to height output_rows, + * by duplicating the bottom row. + */ + +LOCAL(void) +expand_bottom_edge (JSAMPARRAY image_data, JDIMENSION num_cols, + int input_rows, int output_rows) +{ + register int row; + + for (row = input_rows; row < output_rows; row++) { + jcopy_sample_rows(image_data, input_rows-1, image_data, row, + 1, num_cols); + } +} + + +/* + * Process some data in the simple no-context case. + * + * Preprocessor output data is counted in "row groups". A row group + * is defined to be v_samp_factor sample rows of each component. + * Downsampling will produce this much data from each max_v_samp_factor + * input rows. + */ + +METHODDEF(void) +pre_process_data (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + JDIMENSION inrows; + jpeg_component_info * compptr; + + while (*in_row_ctr < in_rows_avail && + *out_row_group_ctr < out_row_groups_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = cinfo->max_v_samp_factor - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + /* If at bottom of image, pad to fill the conversion buffer. */ + if (prep->rows_to_go == 0 && + prep->next_buf_row < cinfo->max_v_samp_factor) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, cinfo->max_v_samp_factor); + } + prep->next_buf_row = cinfo->max_v_samp_factor; + } + /* If we've filled the conversion buffer, empty it. */ + if (prep->next_buf_row == cinfo->max_v_samp_factor) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, (JDIMENSION) 0, + output_buf, *out_row_group_ctr); + prep->next_buf_row = 0; + (*out_row_group_ctr)++; + } + /* If at bottom of image, pad the output to a full iMCU height. + * Note we assume the caller is providing a one-iMCU-height output buffer! + */ + if (prep->rows_to_go == 0 && + *out_row_group_ctr < out_row_groups_avail) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + numrows = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + expand_bottom_edge(output_buf[ci], + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (int) (*out_row_group_ctr * numrows), + (int) (out_row_groups_avail * numrows)); + } + *out_row_group_ctr = out_row_groups_avail; + break; /* can exit outer loop without test */ + } + } +} + + +#ifdef CONTEXT_ROWS_SUPPORTED + +/* + * Process some data in the context case. + */ + +METHODDEF(void) +pre_process_context (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int numrows, ci; + int buf_height = cinfo->max_v_samp_factor * 3; + JDIMENSION inrows; + + while (*out_row_group_ctr < out_row_groups_avail) { + if (*in_row_ctr < in_rows_avail) { + /* Do color conversion to fill the conversion buffer. */ + inrows = in_rows_avail - *in_row_ctr; + numrows = prep->next_buf_stop - prep->next_buf_row; + numrows = (int) MIN((JDIMENSION) numrows, inrows); + (*cinfo->cconvert->color_convert) (cinfo, input_buf + *in_row_ctr, + prep->color_buf, + (JDIMENSION) prep->next_buf_row, + numrows); + /* Pad at top of image, if first time through */ + if (prep->rows_to_go == cinfo->image_height) { + for (ci = 0; ci < cinfo->num_components; ci++) { + int row; + for (row = 1; row <= cinfo->max_v_samp_factor; row++) { + jcopy_sample_rows(prep->color_buf[ci], 0, + prep->color_buf[ci], -row, + 1, cinfo->image_width); + } + } + } + *in_row_ctr += numrows; + prep->next_buf_row += numrows; + prep->rows_to_go -= numrows; + } else { + /* Return for more data, unless we are at the bottom of the image. */ + if (prep->rows_to_go != 0) + break; + /* When at bottom of image, pad to fill the conversion buffer. */ + if (prep->next_buf_row < prep->next_buf_stop) { + for (ci = 0; ci < cinfo->num_components; ci++) { + expand_bottom_edge(prep->color_buf[ci], cinfo->image_width, + prep->next_buf_row, prep->next_buf_stop); + } + prep->next_buf_row = prep->next_buf_stop; + } + } + /* If we've gotten enough data, downsample a row group. */ + if (prep->next_buf_row == prep->next_buf_stop) { + (*cinfo->downsample->downsample) (cinfo, + prep->color_buf, + (JDIMENSION) prep->this_row_group, + output_buf, *out_row_group_ctr); + (*out_row_group_ctr)++; + /* Advance pointers with wraparound as necessary. */ + prep->this_row_group += cinfo->max_v_samp_factor; + if (prep->this_row_group >= buf_height) + prep->this_row_group = 0; + if (prep->next_buf_row >= buf_height) + prep->next_buf_row = 0; + prep->next_buf_stop = prep->next_buf_row + cinfo->max_v_samp_factor; + } + } +} + + +/* + * Create the wrapped-around downsampling input buffer needed for context mode. + */ + +LOCAL(void) +create_context_buffer (j_compress_ptr cinfo) +{ + my_prep_ptr prep = (my_prep_ptr) cinfo->prep; + int rgroup_height = cinfo->max_v_samp_factor; + int ci, i; + jpeg_component_info * compptr; + JSAMPARRAY true_buffer, fake_buffer; + + /* Grab enough space for fake row pointers for all the components; + * we need five row groups' worth of pointers for each component. + */ + fake_buffer = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (cinfo->num_components * 5 * rgroup_height) * + SIZEOF(JSAMPROW)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate the actual buffer space (3 row groups) for this component. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + true_buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) (3 * rgroup_height)); + /* Copy true buffer row pointers into the middle of the fake row array */ + MEMCOPY(fake_buffer + rgroup_height, true_buffer, + 3 * rgroup_height * SIZEOF(JSAMPROW)); + /* Fill in the above and below wraparound pointers */ + for (i = 0; i < rgroup_height; i++) { + fake_buffer[i] = true_buffer[2 * rgroup_height + i]; + fake_buffer[4 * rgroup_height + i] = true_buffer[i]; + } + prep->color_buf[ci] = fake_buffer + rgroup_height; + fake_buffer += 5 * rgroup_height; /* point to space for next component */ + } +} + +#endif /* CONTEXT_ROWS_SUPPORTED */ + + +/* + * Initialize preprocessing controller. + */ + +GLOBAL(void) +jinit_c_prep_controller (j_compress_ptr cinfo, boolean need_full_buffer) +{ + my_prep_ptr prep; + int ci; + jpeg_component_info * compptr; + + if (need_full_buffer) /* safety check */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + prep = (my_prep_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_prep_controller)); + cinfo->prep = (struct jpeg_c_prep_controller *) prep; + prep->pub.start_pass = start_pass_prep; + + /* Allocate the color conversion buffer. + * We make the buffer wide enough to allow the downsampler to edge-expand + * horizontally within the buffer, if it so chooses. + */ + if (cinfo->downsample->need_context_rows) { + /* Set up to provide context rows */ +#ifdef CONTEXT_ROWS_SUPPORTED + prep->pub.pre_process_data = pre_process_context; + create_context_buffer(cinfo); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* No context, just make it tall enough for one row group */ + prep->pub.pre_process_data = pre_process_data; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + prep->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (((long) compptr->width_in_blocks * + cinfo->min_DCT_h_scaled_size * + cinfo->max_h_samp_factor) / compptr->h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} diff --git a/src/3rdparty/libjpeg/jcsample.c b/src/3rdparty/libjpeg/jcsample.c new file mode 100644 index 0000000..4d36f85 --- /dev/null +++ b/src/3rdparty/libjpeg/jcsample.c @@ -0,0 +1,545 @@ +/* + * jcsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains downsampling routines. + * + * Downsampling input data is counted in "row groups". A row group + * is defined to be max_v_samp_factor pixel rows of each component, + * from which the downsampler produces v_samp_factor sample rows. + * A single row group is processed in each call to the downsampler module. + * + * The downsampler is responsible for edge-expansion of its output data + * to fill an integral number of DCT blocks horizontally. The source buffer + * may be modified if it is helpful for this purpose (the source buffer is + * allocated wide enough to correspond to the desired output width). + * The caller (the prep controller) is responsible for vertical padding. + * + * The downsampler may request "context rows" by setting need_context_rows + * during startup. In this case, the input arrays will contain at least + * one row group's worth of pixels above and below the passed-in data; + * the caller will create dummy rows at image top and bottom by replicating + * the first or last real pixel row. + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + * + * The downsampling algorithm used here is a simple average of the source + * pixels covered by the output pixel. The hi-falutin sampling literature + * refers to this as a "box filter". In general the characteristics of a box + * filter are not very good, but for the specific cases we normally use (1:1 + * and 2:1 ratios) the box is equivalent to a "triangle filter" which is not + * nearly so bad. If you intend to use other sampling ratios, you'd be well + * advised to improve this code. + * + * A simple input-smoothing capability is provided. This is mainly intended + * for cleaning up color-dithered GIF input files (if you find it inadequate, + * we suggest using an external filtering program such as pnmconvol). When + * enabled, each input pixel P is replaced by a weighted sum of itself and its + * eight neighbors. P's weight is 1-8*SF and each neighbor's weight is SF, + * where SF = (smoothing_factor / 1024). + * Currently, smoothing is only supported for 2h2v sampling factors. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to downsample a single component */ +typedef JMETHOD(void, downsample1_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data)); + +/* Private subobject */ + +typedef struct { + struct jpeg_downsampler pub; /* public fields */ + + /* Downsampling method pointers, one per component */ + downsample1_ptr methods[MAX_COMPONENTS]; + + /* Height of an output row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_downsample need not + * recompute them each time. They are unused for other downsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_downsampler; + +typedef my_downsampler * my_downsample_ptr; + + +/* + * Initialize for a downsampling pass. + */ + +METHODDEF(void) +start_pass_downsample (j_compress_ptr cinfo) +{ + /* no work for now */ +} + + +/* + * Expand a component horizontally from width input_cols to width output_cols, + * by duplicating the rightmost samples. + */ + +LOCAL(void) +expand_right_edge (JSAMPARRAY image_data, int num_rows, + JDIMENSION input_cols, JDIMENSION output_cols) +{ + register JSAMPROW ptr; + register JSAMPLE pixval; + register int count; + int row; + int numcols = (int) (output_cols - input_cols); + + if (numcols > 0) { + for (row = 0; row < num_rows; row++) { + ptr = image_data[row] + input_cols; + pixval = ptr[-1]; /* don't need GETJSAMPLE() here */ + for (count = numcols; count > 0; count--) + *ptr++ = pixval; + } + } +} + + +/* + * Do downsampling for a whole row group (all components). + * + * In this version we simply downsample each component independently. + */ + +METHODDEF(void) +sep_downsample (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, JDIMENSION out_row_group_index) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int ci; + jpeg_component_info * compptr; + JSAMPARRAY in_ptr, out_ptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + in_ptr = input_buf[ci] + in_row_index; + out_ptr = output_buf[ci] + + (out_row_group_index * downsample->rowgroup_height[ci]); + (*downsample->methods[ci]) (cinfo, compptr, in_ptr, out_ptr); + } +} + + +/* + * Downsample pixel values of a single component. + * One row group is processed per call. + * This version handles arbitrary integral sampling ratios, without smoothing. + * Note that this version is not actually used for customary sampling ratios. + */ + +METHODDEF(void) +int_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + my_downsample_ptr downsample = (my_downsample_ptr) cinfo->downsample; + int inrow, outrow, h_expand, v_expand, numpix, numpix2, h, v; + JDIMENSION outcol, outcol_h; /* outcol_h == outcol*h_expand */ + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + JSAMPROW inptr, outptr; + INT32 outvalue; + + h_expand = downsample->h_expand[compptr->component_index]; + v_expand = downsample->v_expand[compptr->component_index]; + numpix = h_expand * v_expand; + numpix2 = numpix/2; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * h_expand); + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + for (outcol = 0, outcol_h = 0; outcol < output_cols; + outcol++, outcol_h += h_expand) { + outvalue = 0; + for (v = 0; v < v_expand; v++) { + inptr = input_data[inrow+v] + outcol_h; + for (h = 0; h < h_expand; h++) { + outvalue += (INT32) GETJSAMPLE(*inptr++); + } + } + *outptr++ = (JSAMPLE) ((outvalue + numpix2) / numpix); + } + inrow += v_expand; + outrow++; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * without smoothing. + */ + +METHODDEF(void) +fullsize_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + /* Copy the data */ + jcopy_sample_rows(input_data, 0, output_data, 0, + cinfo->max_v_samp_factor, cinfo->image_width); + /* Edge-expand */ + expand_right_edge(output_data, cinfo->max_v_samp_factor, cinfo->image_width, + compptr->width_in_blocks * compptr->DCT_h_scaled_size); +} + + +/* + * Downsample pixel values of a single component. + * This version handles the common case of 2:1 horizontal and 1:1 vertical, + * without smoothing. + * + * A note about the "bias" calculations: when rounding fractional values to + * integer, we do not want to always round 0.5 up to the next integer. + * If we did that, we'd introduce a noticeable bias towards larger values. + * Instead, this code is arranged so that 0.5 will be rounded up or down at + * alternate pixel locations (a simple ordered dither pattern). + */ + +METHODDEF(void) +h2v1_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + bias = 0; /* bias = 0,1,0,1,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr) + GETJSAMPLE(inptr[1]) + + bias) >> 1); + bias ^= 1; /* 0=>1, 1=>0 */ + inptr += 2; + } + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * without smoothing. + */ + +METHODDEF(void) +h2v2_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION outcol; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr0, inptr1, outptr; + register int bias; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data, cinfo->max_v_samp_factor, + cinfo->image_width, output_cols * 2); + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + bias = 1; /* bias = 1,2,1,2,... for successive samples */ + for (outcol = 0; outcol < output_cols; outcol++) { + *outptr++ = (JSAMPLE) ((GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]) + + bias) >> 2); + bias ^= 3; /* 1=>2, 2=>1 */ + inptr0 += 2; inptr1 += 2; + } + inrow += 2; + outrow++; + } +} + + +#ifdef INPUT_SMOOTHING_SUPPORTED + +/* + * Downsample pixel values of a single component. + * This version handles the standard case of 2:1 horizontal and 2:1 vertical, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +h2v2_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow, outrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr0, inptr1, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols * 2); + + /* We don't bother to form the individual "smoothed" input pixel values; + * we can directly compute the output which is the average of the four + * smoothed values. Each of the four member pixels contributes a fraction + * (1-8*SF) to its own smoothed image and a fraction SF to each of the three + * other smoothed pixels, therefore a total fraction (1-5*SF)/4 to the final + * output. The four corner-adjacent neighbor pixels contribute a fraction + * SF to just one smoothed pixel, or SF/4 to the final output; while the + * eight edge-adjacent neighbors contribute SF to each of two smoothed + * pixels, or SF/2 overall. In order to use integer arithmetic, these + * factors are scaled by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 16384 - cinfo->smoothing_factor * 80; /* scaled (1-5*SF)/4 */ + neighscale = cinfo->smoothing_factor * 16; /* scaled SF/4 */ + + inrow = outrow = 0; + while (inrow < cinfo->max_v_samp_factor) { + outptr = output_data[outrow]; + inptr0 = input_data[inrow]; + inptr1 = input_data[inrow+1]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+2]; + + /* Special case for first column: pretend column -1 is same as column 0 */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[2]); + neighsum += neighsum; + neighsum += GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[2]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + /* sum of pixels directly mapped to this output element */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + /* sum of edge-neighbor pixels */ + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[2]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[2]); + /* The edge-neighbors count twice as much as corner-neighbors */ + neighsum += neighsum; + /* Add in the corner-neighbors */ + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[2]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[2]); + /* form final output scaled up by 2^16 */ + membersum = membersum * memberscale + neighsum * neighscale; + /* round, descale and output it */ + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + inptr0 += 2; inptr1 += 2; above_ptr += 2; below_ptr += 2; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr0) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(*inptr1) + GETJSAMPLE(inptr1[1]); + neighsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(*below_ptr) + GETJSAMPLE(below_ptr[1]) + + GETJSAMPLE(inptr0[-1]) + GETJSAMPLE(inptr0[1]) + + GETJSAMPLE(inptr1[-1]) + GETJSAMPLE(inptr1[1]); + neighsum += neighsum; + neighsum += GETJSAMPLE(above_ptr[-1]) + GETJSAMPLE(above_ptr[1]) + + GETJSAMPLE(below_ptr[-1]) + GETJSAMPLE(below_ptr[1]); + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + inrow += 2; + outrow++; + } +} + + +/* + * Downsample pixel values of a single component. + * This version handles the special case of a full-size component, + * with smoothing. One row of context is required. + */ + +METHODDEF(void) +fullsize_smooth_downsample (j_compress_ptr cinfo, jpeg_component_info *compptr, + JSAMPARRAY input_data, JSAMPARRAY output_data) +{ + int inrow; + JDIMENSION colctr; + JDIMENSION output_cols = compptr->width_in_blocks * compptr->DCT_h_scaled_size; + register JSAMPROW inptr, above_ptr, below_ptr, outptr; + INT32 membersum, neighsum, memberscale, neighscale; + int colsum, lastcolsum, nextcolsum; + + /* Expand input data enough to let all the output samples be generated + * by the standard loop. Special-casing padded output would be more + * efficient. + */ + expand_right_edge(input_data - 1, cinfo->max_v_samp_factor + 2, + cinfo->image_width, output_cols); + + /* Each of the eight neighbor pixels contributes a fraction SF to the + * smoothed pixel, while the main pixel contributes (1-8*SF). In order + * to use integer arithmetic, these factors are multiplied by 2^16 = 65536. + * Also recall that SF = smoothing_factor / 1024. + */ + + memberscale = 65536L - cinfo->smoothing_factor * 512L; /* scaled 1-8*SF */ + neighscale = cinfo->smoothing_factor * 64; /* scaled SF */ + + for (inrow = 0; inrow < cinfo->max_v_samp_factor; inrow++) { + outptr = output_data[inrow]; + inptr = input_data[inrow]; + above_ptr = input_data[inrow-1]; + below_ptr = input_data[inrow+1]; + + /* Special case for first column */ + colsum = GETJSAMPLE(*above_ptr++) + GETJSAMPLE(*below_ptr++) + + GETJSAMPLE(*inptr); + membersum = GETJSAMPLE(*inptr++); + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = colsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + + for (colctr = output_cols - 2; colctr > 0; colctr--) { + membersum = GETJSAMPLE(*inptr++); + above_ptr++; below_ptr++; + nextcolsum = GETJSAMPLE(*above_ptr) + GETJSAMPLE(*below_ptr) + + GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + nextcolsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr++ = (JSAMPLE) ((membersum + 32768) >> 16); + lastcolsum = colsum; colsum = nextcolsum; + } + + /* Special case for last column */ + membersum = GETJSAMPLE(*inptr); + neighsum = lastcolsum + (colsum - membersum) + colsum; + membersum = membersum * memberscale + neighsum * neighscale; + *outptr = (JSAMPLE) ((membersum + 32768) >> 16); + + } +} + +#endif /* INPUT_SMOOTHING_SUPPORTED */ + + +/* + * Module initialization routine for downsampling. + * Note that we must select a routine for each component. + */ + +GLOBAL(void) +jinit_downsampler (j_compress_ptr cinfo) +{ + my_downsample_ptr downsample; + int ci; + jpeg_component_info * compptr; + boolean smoothok = TRUE; + int h_in_group, v_in_group, h_out_group, v_out_group; + + downsample = (my_downsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_downsampler)); + cinfo->downsample = (struct jpeg_downsampler *) downsample; + downsample->pub.start_pass = start_pass_downsample; + downsample->pub.downsample = sep_downsample; + downsample->pub.need_context_rows = FALSE; + + if (cinfo->CCIR601_sampling) + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, and set up method pointers */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "output group" for DCT scaling. This many samples + * are to be converted from max_h_samp_factor * max_v_samp_factor pixels. + */ + h_out_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_out_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_in_group = cinfo->max_h_samp_factor; + v_in_group = cinfo->max_v_samp_factor; + downsample->rowgroup_height[ci] = v_out_group; /* save for use later */ + if (h_in_group == h_out_group && v_in_group == v_out_group) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = fullsize_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = fullsize_downsample; + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group) { + smoothok = FALSE; + downsample->methods[ci] = h2v1_downsample; + } else if (h_in_group == h_out_group * 2 && + v_in_group == v_out_group * 2) { +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor) { + downsample->methods[ci] = h2v2_smooth_downsample; + downsample->pub.need_context_rows = TRUE; + } else +#endif + downsample->methods[ci] = h2v2_downsample; + } else if ((h_in_group % h_out_group) == 0 && + (v_in_group % v_out_group) == 0) { + smoothok = FALSE; + downsample->methods[ci] = int_downsample; + downsample->h_expand[ci] = (UINT8) (h_in_group / h_out_group); + downsample->v_expand[ci] = (UINT8) (v_in_group / v_out_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + } + +#ifdef INPUT_SMOOTHING_SUPPORTED + if (cinfo->smoothing_factor && !smoothok) + TRACEMS(cinfo, 0, JTRC_SMOOTH_NOTIMPL); +#endif +} diff --git a/src/3rdparty/libjpeg/jctrans.c b/src/3rdparty/libjpeg/jctrans.c new file mode 100644 index 0000000..cee6b0f --- /dev/null +++ b/src/3rdparty/libjpeg/jctrans.c @@ -0,0 +1,382 @@ +/* + * jctrans.c + * + * Copyright (C) 1995-1998, Thomas G. Lane. + * Modified 2000-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding compression, + * that is, writing raw DCT coefficient arrays to an output JPEG file. + * The routines in jcapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transencode_master_selection + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); +LOCAL(void) transencode_coef_controller + JPP((j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays)); + + +/* + * Compression initialization for writing raw-coefficient data. + * Before calling this, all parameters and a data destination must be set up. + * Call jpeg_finish_compress() to actually write the data. + * + * The number of passed virtual arrays must match cinfo->num_components. + * Note that the virtual arrays need not be filled or even realized at + * the time write_coefficients is called; indeed, if the virtual arrays + * were requested from this compression object's memory manager, they + * typically will be realized during this routine and filled afterwards. + */ + +GLOBAL(void) +jpeg_write_coefficients (j_compress_ptr cinfo, jvirt_barray_ptr * coef_arrays) +{ + if (cinfo->global_state != CSTATE_START) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Mark all tables to be written */ + jpeg_suppress_tables(cinfo, FALSE); + /* (Re)initialize error mgr and destination modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->dest->init_destination) (cinfo); + /* Perform master selection of active modules */ + transencode_master_selection(cinfo, coef_arrays); + /* Wait for jpeg_finish_compress() call */ + cinfo->next_scanline = 0; /* so jpeg_write_marker works */ + cinfo->global_state = CSTATE_WRCOEFS; +} + + +/* + * Initialize the compression object with default parameters, + * then copy from the source object all parameters needed for lossless + * transcoding. Parameters that can be varied without loss (such as + * scan script and Huffman optimization) are left in their default states. + */ + +GLOBAL(void) +jpeg_copy_critical_parameters (j_decompress_ptr srcinfo, + j_compress_ptr dstinfo) +{ + JQUANT_TBL ** qtblptr; + jpeg_component_info *incomp, *outcomp; + JQUANT_TBL *c_quant, *slot_quant; + int tblno, ci, coefi; + + /* Safety check to ensure start_compress not called yet. */ + if (dstinfo->global_state != CSTATE_START) + ERREXIT1(dstinfo, JERR_BAD_STATE, dstinfo->global_state); + /* Copy fundamental image dimensions */ + dstinfo->image_width = srcinfo->image_width; + dstinfo->image_height = srcinfo->image_height; + dstinfo->input_components = srcinfo->num_components; + dstinfo->in_color_space = srcinfo->jpeg_color_space; + dstinfo->jpeg_width = srcinfo->output_width; + dstinfo->jpeg_height = srcinfo->output_height; + dstinfo->min_DCT_h_scaled_size = srcinfo->min_DCT_h_scaled_size; + dstinfo->min_DCT_v_scaled_size = srcinfo->min_DCT_v_scaled_size; + /* Initialize all parameters to default values */ + jpeg_set_defaults(dstinfo); + /* jpeg_set_defaults may choose wrong colorspace, eg YCbCr if input is RGB. + * Fix it to get the right header markers for the image colorspace. + */ + jpeg_set_colorspace(dstinfo, srcinfo->jpeg_color_space); + dstinfo->data_precision = srcinfo->data_precision; + dstinfo->CCIR601_sampling = srcinfo->CCIR601_sampling; + /* Copy the source's quantization tables. */ + for (tblno = 0; tblno < NUM_QUANT_TBLS; tblno++) { + if (srcinfo->quant_tbl_ptrs[tblno] != NULL) { + qtblptr = & dstinfo->quant_tbl_ptrs[tblno]; + if (*qtblptr == NULL) + *qtblptr = jpeg_alloc_quant_table((j_common_ptr) dstinfo); + MEMCOPY((*qtblptr)->quantval, + srcinfo->quant_tbl_ptrs[tblno]->quantval, + SIZEOF((*qtblptr)->quantval)); + (*qtblptr)->sent_table = FALSE; + } + } + /* Copy the source's per-component info. + * Note we assume jpeg_set_defaults has allocated the dest comp_info array. + */ + dstinfo->num_components = srcinfo->num_components; + if (dstinfo->num_components < 1 || dstinfo->num_components > MAX_COMPONENTS) + ERREXIT2(dstinfo, JERR_COMPONENT_COUNT, dstinfo->num_components, + MAX_COMPONENTS); + for (ci = 0, incomp = srcinfo->comp_info, outcomp = dstinfo->comp_info; + ci < dstinfo->num_components; ci++, incomp++, outcomp++) { + outcomp->component_id = incomp->component_id; + outcomp->h_samp_factor = incomp->h_samp_factor; + outcomp->v_samp_factor = incomp->v_samp_factor; + outcomp->quant_tbl_no = incomp->quant_tbl_no; + /* Make sure saved quantization table for component matches the qtable + * slot. If not, the input file re-used this qtable slot. + * IJG encoder currently cannot duplicate this. + */ + tblno = outcomp->quant_tbl_no; + if (tblno < 0 || tblno >= NUM_QUANT_TBLS || + srcinfo->quant_tbl_ptrs[tblno] == NULL) + ERREXIT1(dstinfo, JERR_NO_QUANT_TABLE, tblno); + slot_quant = srcinfo->quant_tbl_ptrs[tblno]; + c_quant = incomp->quant_table; + if (c_quant != NULL) { + for (coefi = 0; coefi < DCTSIZE2; coefi++) { + if (c_quant->quantval[coefi] != slot_quant->quantval[coefi]) + ERREXIT1(dstinfo, JERR_MISMATCHED_QUANT_TABLE, tblno); + } + } + /* Note: we do not copy the source's Huffman table assignments; + * instead we rely on jpeg_set_colorspace to have made a suitable choice. + */ + } + /* Also copy JFIF version and resolution information, if available. + * Strictly speaking this isn't "critical" info, but it's nearly + * always appropriate to copy it if available. In particular, + * if the application chooses to copy JFIF 1.02 extension markers from + * the source file, we need to copy the version to make sure we don't + * emit a file that has 1.02 extensions but a claimed version of 1.01. + * We will *not*, however, copy version info from mislabeled "2.01" files. + */ + if (srcinfo->saw_JFIF_marker) { + if (srcinfo->JFIF_major_version == 1) { + dstinfo->JFIF_major_version = srcinfo->JFIF_major_version; + dstinfo->JFIF_minor_version = srcinfo->JFIF_minor_version; + } + dstinfo->density_unit = srcinfo->density_unit; + dstinfo->X_density = srcinfo->X_density; + dstinfo->Y_density = srcinfo->Y_density; + } +} + + +/* + * Master selection of compression modules for transcoding. + * This substitutes for jcinit.c's initialization of the full compressor. + */ + +LOCAL(void) +transencode_master_selection (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + /* Initialize master control (includes parameter checking/processing) */ + jinit_c_master_control(cinfo, TRUE /* transcode only */); + + /* Entropy encoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_encoder(cinfo); + else { + jinit_huff_encoder(cinfo); + } + + /* We need a special coefficient buffer controller. */ + transencode_coef_controller(cinfo, coef_arrays); + + jinit_marker_writer(cinfo); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Write the datastream header (SOI, JFIF) immediately. + * Frame and scan headers are postponed till later. + * This lets application insert special markers after the SOI. + */ + (*cinfo->marker->write_file_header) (cinfo); +} + + +/* + * The rest of this file is a special implementation of the coefficient + * buffer controller. This is similar to jccoefct.c, but it handles only + * output from presupplied virtual arrays. Furthermore, we generate any + * dummy padding blocks on-the-fly rather than expecting them to be present + * in the arrays. + */ + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_c_coef_controller pub; /* public fields */ + + JDIMENSION iMCU_row_num; /* iMCU row # within image */ + JDIMENSION mcu_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* Virtual block array for each component. */ + jvirt_barray_ptr * whole_image; + + /* Workspace for constructing dummy blocks at right/bottom edges. */ + JBLOCKROW dummy_buffer[C_MAX_BLOCKS_IN_MCU]; +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + + +LOCAL(void) +start_iMCU_row (j_compress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (coef->iMCU_row_num < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->mcu_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_coef (j_compress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + if (pass_mode != JBUF_CRANK_DEST) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + coef->iMCU_row_num = 0; + start_iMCU_row(cinfo); +} + + +/* + * Process some data. + * We process the equivalent of one fully interleaved MCU row ("iMCU" row) + * per call, ie, v_samp_factor block rows for each component in the scan. + * The data is obtained from the virtual arrays and fed to the entropy coder. + * Returns TRUE if the iMCU row is completed, FALSE if suspended. + * + * NB: input_buf is ignored; it is likely to be a NULL pointer. + */ + +METHODDEF(boolean) +compress_output (j_compress_ptr cinfo, JSAMPIMAGE input_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, blockcnt; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW MCU_buffer[C_MAX_BLOCKS_IN_MCU]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + coef->iMCU_row_num * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->mcu_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + blockcnt = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (coef->iMCU_row_num < last_iMCU_row || + yindex+yoffset < compptr->last_row_height) { + /* Fill in pointers to real blocks in this row */ + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < blockcnt; xindex++) + MCU_buffer[blkn++] = buffer_ptr++; + } else { + /* At bottom of image, need a whole row of dummy blocks */ + xindex = 0; + } + /* Fill in any dummy blocks needed in this row. + * Dummy blocks are filled in the same way as in jccoefct.c: + * all zeroes in the AC entries, DC entries equal to previous + * block's DC value. The init routine has already zeroed the + * AC entries, so we need only set the DC entries correctly. + */ + for (; xindex < compptr->MCU_width; xindex++) { + MCU_buffer[blkn] = coef->dummy_buffer[blkn]; + MCU_buffer[blkn][0][0] = MCU_buffer[blkn-1][0][0]; + blkn++; + } + } + } + /* Try to write the MCU. */ + if (! (*cinfo->entropy->encode_mcu) (cinfo, MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->mcu_ctr = MCU_col_num; + return FALSE; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->mcu_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + coef->iMCU_row_num++; + start_iMCU_row(cinfo); + return TRUE; +} + + +/* + * Initialize coefficient buffer controller. + * + * Each passed coefficient array must be the right size for that + * coefficient: width_in_blocks wide and height_in_blocks high, + * with unitheight at least v_samp_factor. + */ + +LOCAL(void) +transencode_coef_controller (j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays) +{ + my_coef_ptr coef; + JBLOCKROW buffer; + int i; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_c_coef_controller *) coef; + coef->pub.start_pass = start_pass_coef; + coef->pub.compress_data = compress_output; + + /* Save pointer to virtual arrays */ + coef->whole_image = coef_arrays; + + /* Allocate and pre-zero space for dummy DCT blocks. */ + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + jzero_far((void FAR *) buffer, C_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < C_MAX_BLOCKS_IN_MCU; i++) { + coef->dummy_buffer[i] = buffer + i; + } +} diff --git a/src/3rdparty/libjpeg/jdapimin.c b/src/3rdparty/libjpeg/jdapimin.c new file mode 100644 index 0000000..7f1ce4c --- /dev/null +++ b/src/3rdparty/libjpeg/jdapimin.c @@ -0,0 +1,396 @@ +/* + * jdapimin.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "minimum" API routines that may be + * needed in either the normal full-decompression case or the + * transcoding-only case. + * + * Most of the routines intended to be called directly by an application + * are in this file or in jdapistd.c. But also see jcomapi.c for routines + * shared by compression and decompression, and jdtrans.c for the transcoding + * case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * Initialization of a JPEG decompression object. + * The error manager must already be set up (in case memory manager fails). + */ + +GLOBAL(void) +jpeg_CreateDecompress (j_decompress_ptr cinfo, int version, size_t structsize) +{ + int i; + + /* Guard against version mismatches between library and caller. */ + cinfo->mem = NULL; /* so jpeg_destroy knows mem mgr not called */ + if (version != JPEG_LIB_VERSION) + ERREXIT2(cinfo, JERR_BAD_LIB_VERSION, JPEG_LIB_VERSION, version); + if (structsize != SIZEOF(struct jpeg_decompress_struct)) + ERREXIT2(cinfo, JERR_BAD_STRUCT_SIZE, + (int) SIZEOF(struct jpeg_decompress_struct), (int) structsize); + + /* For debugging purposes, we zero the whole master structure. + * But the application has already set the err pointer, and may have set + * client_data, so we have to save and restore those fields. + * Note: if application hasn't set client_data, tools like Purify may + * complain here. + */ + { + struct jpeg_error_mgr * err = cinfo->err; + void * client_data = cinfo->client_data; /* ignore Purify complaint here */ + MEMZERO(cinfo, SIZEOF(struct jpeg_decompress_struct)); + cinfo->err = err; + cinfo->client_data = client_data; + } + cinfo->is_decompressor = TRUE; + + /* Initialize a memory manager instance for this object */ + jinit_memory_mgr((j_common_ptr) cinfo); + + /* Zero out pointers to permanent structures. */ + cinfo->progress = NULL; + cinfo->src = NULL; + + for (i = 0; i < NUM_QUANT_TBLS; i++) + cinfo->quant_tbl_ptrs[i] = NULL; + + for (i = 0; i < NUM_HUFF_TBLS; i++) { + cinfo->dc_huff_tbl_ptrs[i] = NULL; + cinfo->ac_huff_tbl_ptrs[i] = NULL; + } + + /* Initialize marker processor so application can override methods + * for COM, APPn markers before calling jpeg_read_header. + */ + cinfo->marker_list = NULL; + jinit_marker_reader(cinfo); + + /* And initialize the overall input controller. */ + jinit_input_controller(cinfo); + + /* OK, I'm ready */ + cinfo->global_state = DSTATE_START; +} + + +/* + * Destruction of a JPEG decompression object + */ + +GLOBAL(void) +jpeg_destroy_decompress (j_decompress_ptr cinfo) +{ + jpeg_destroy((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Abort processing of a JPEG decompression operation, + * but don't destroy the object itself. + */ + +GLOBAL(void) +jpeg_abort_decompress (j_decompress_ptr cinfo) +{ + jpeg_abort((j_common_ptr) cinfo); /* use common routine */ +} + + +/* + * Set default decompression parameters. + */ + +LOCAL(void) +default_decompress_parms (j_decompress_ptr cinfo) +{ + /* Guess the input colorspace, and set output colorspace accordingly. */ + /* (Wish JPEG committee had provided a real way to specify this...) */ + /* Note application may override our guesses. */ + switch (cinfo->num_components) { + case 1: + cinfo->jpeg_color_space = JCS_GRAYSCALE; + cinfo->out_color_space = JCS_GRAYSCALE; + break; + + case 3: + if (cinfo->saw_JFIF_marker) { + cinfo->jpeg_color_space = JCS_YCbCr; /* JFIF implies YCbCr */ + } else if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_RGB; + break; + case 1: + cinfo->jpeg_color_space = JCS_YCbCr; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + break; + } + } else { + /* Saw no special markers, try to guess from the component IDs */ + int cid0 = cinfo->comp_info[0].component_id; + int cid1 = cinfo->comp_info[1].component_id; + int cid2 = cinfo->comp_info[2].component_id; + + if (cid0 == 1 && cid1 == 2 && cid2 == 3) + cinfo->jpeg_color_space = JCS_YCbCr; /* assume JFIF w/out marker */ + else if (cid0 == 82 && cid1 == 71 && cid2 == 66) + cinfo->jpeg_color_space = JCS_RGB; /* ASCII 'R', 'G', 'B' */ + else { + TRACEMS3(cinfo, 1, JTRC_UNKNOWN_IDS, cid0, cid1, cid2); + cinfo->jpeg_color_space = JCS_YCbCr; /* assume it's YCbCr */ + } + } + /* Always guess RGB is proper output colorspace. */ + cinfo->out_color_space = JCS_RGB; + break; + + case 4: + if (cinfo->saw_Adobe_marker) { + switch (cinfo->Adobe_transform) { + case 0: + cinfo->jpeg_color_space = JCS_CMYK; + break; + case 2: + cinfo->jpeg_color_space = JCS_YCCK; + break; + default: + WARNMS1(cinfo, JWRN_ADOBE_XFORM, cinfo->Adobe_transform); + cinfo->jpeg_color_space = JCS_YCCK; /* assume it's YCCK */ + break; + } + } else { + /* No special markers, assume straight CMYK. */ + cinfo->jpeg_color_space = JCS_CMYK; + } + cinfo->out_color_space = JCS_CMYK; + break; + + default: + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->out_color_space = JCS_UNKNOWN; + break; + } + + /* Set defaults for other decompression parameters. */ + cinfo->scale_num = cinfo->block_size; /* 1:1 scaling */ + cinfo->scale_denom = cinfo->block_size; + cinfo->output_gamma = 1.0; + cinfo->buffered_image = FALSE; + cinfo->raw_data_out = FALSE; + cinfo->dct_method = JDCT_DEFAULT; + cinfo->do_fancy_upsampling = TRUE; + cinfo->do_block_smoothing = TRUE; + cinfo->quantize_colors = FALSE; + /* We set these in case application only sets quantize_colors. */ + cinfo->dither_mode = JDITHER_FS; +#ifdef QUANT_2PASS_SUPPORTED + cinfo->two_pass_quantize = TRUE; +#else + cinfo->two_pass_quantize = FALSE; +#endif + cinfo->desired_number_of_colors = 256; + cinfo->colormap = NULL; + /* Initialize for no mode change in buffered-image mode. */ + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; +} + + +/* + * Decompression startup: read start of JPEG datastream to see what's there. + * Need only initialize JPEG object and supply a data source before calling. + * + * This routine will read as far as the first SOS marker (ie, actual start of + * compressed data), and will save all tables and parameters in the JPEG + * object. It will also initialize the decompression parameters to default + * values, and finally return JPEG_HEADER_OK. On return, the application may + * adjust the decompression parameters and then call jpeg_start_decompress. + * (Or, if the application only wanted to determine the image parameters, + * the data need not be decompressed. In that case, call jpeg_abort or + * jpeg_destroy to release any temporary space.) + * If an abbreviated (tables only) datastream is presented, the routine will + * return JPEG_HEADER_TABLES_ONLY upon reaching EOI. The application may then + * re-use the JPEG object to read the abbreviated image datastream(s). + * It is unnecessary (but OK) to call jpeg_abort in this case. + * The JPEG_SUSPENDED return code only occurs if the data source module + * requests suspension of the decompressor. In this case the application + * should load more source data and then re-call jpeg_read_header to resume + * processing. + * If a non-suspending data source is used and require_image is TRUE, then the + * return code need not be inspected since only JPEG_HEADER_OK is possible. + * + * This routine is now just a front end to jpeg_consume_input, with some + * extra error checking. + */ + +GLOBAL(int) +jpeg_read_header (j_decompress_ptr cinfo, boolean require_image) +{ + int retcode; + + if (cinfo->global_state != DSTATE_START && + cinfo->global_state != DSTATE_INHEADER) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + retcode = jpeg_consume_input(cinfo); + + switch (retcode) { + case JPEG_REACHED_SOS: + retcode = JPEG_HEADER_OK; + break; + case JPEG_REACHED_EOI: + if (require_image) /* Complain if application wanted an image */ + ERREXIT(cinfo, JERR_NO_IMAGE); + /* Reset to start state; it would be safer to require the application to + * call jpeg_abort, but we can't change it now for compatibility reasons. + * A side effect is to free any temporary memory (there shouldn't be any). + */ + jpeg_abort((j_common_ptr) cinfo); /* sets state = DSTATE_START */ + retcode = JPEG_HEADER_TABLES_ONLY; + break; + case JPEG_SUSPENDED: + /* no work */ + break; + } + + return retcode; +} + + +/* + * Consume data in advance of what the decompressor requires. + * This can be called at any time once the decompressor object has + * been created and a data source has been set up. + * + * This routine is essentially a state machine that handles a couple + * of critical state-transition actions, namely initial setup and + * transition from header scanning to ready-for-start_decompress. + * All the actual input is done via the input controller's consume_input + * method. + */ + +GLOBAL(int) +jpeg_consume_input (j_decompress_ptr cinfo) +{ + int retcode = JPEG_SUSPENDED; + + /* NB: every possible DSTATE value should be listed in this switch */ + switch (cinfo->global_state) { + case DSTATE_START: + /* Start-of-datastream actions: reset appropriate modules */ + (*cinfo->inputctl->reset_input_controller) (cinfo); + /* Initialize application's data source module */ + (*cinfo->src->init_source) (cinfo); + cinfo->global_state = DSTATE_INHEADER; + /*FALLTHROUGH*/ + case DSTATE_INHEADER: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_REACHED_SOS) { /* Found SOS, prepare to decompress */ + /* Set up default parameters based on header data */ + default_decompress_parms(cinfo); + /* Set global state: ready for start_decompress */ + cinfo->global_state = DSTATE_READY; + } + break; + case DSTATE_READY: + /* Can't advance past first SOS until start_decompress is called */ + retcode = JPEG_REACHED_SOS; + break; + case DSTATE_PRELOAD: + case DSTATE_PRESCAN: + case DSTATE_SCANNING: + case DSTATE_RAW_OK: + case DSTATE_BUFIMAGE: + case DSTATE_BUFPOST: + case DSTATE_STOPPING: + retcode = (*cinfo->inputctl->consume_input) (cinfo); + break; + default: + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + return retcode; +} + + +/* + * Have we finished reading the input file? + */ + +GLOBAL(boolean) +jpeg_input_complete (j_decompress_ptr cinfo) +{ + /* Check for valid jpeg object */ + if (cinfo->global_state < DSTATE_START || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->eoi_reached; +} + + +/* + * Is there more than one scan? + */ + +GLOBAL(boolean) +jpeg_has_multiple_scans (j_decompress_ptr cinfo) +{ + /* Only valid after jpeg_read_header completes */ + if (cinfo->global_state < DSTATE_READY || + cinfo->global_state > DSTATE_STOPPING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return cinfo->inputctl->has_multiple_scans; +} + + +/* + * Finish JPEG decompression. + * + * This will normally just verify the file trailer and release temp storage. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_decompress (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && ! cinfo->buffered_image) { + /* Terminate final pass of non-buffered mode */ + if (cinfo->output_scanline < cinfo->output_height) + ERREXIT(cinfo, JERR_TOO_LITTLE_DATA); + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state == DSTATE_BUFIMAGE) { + /* Finishing after a buffered-image operation */ + cinfo->global_state = DSTATE_STOPPING; + } else if (cinfo->global_state != DSTATE_STOPPING) { + /* STOPPING = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read until EOI */ + while (! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + /* Do final cleanup */ + (*cinfo->src->term_source) (cinfo); + /* We can use jpeg_abort to release memory and reset global_state */ + jpeg_abort((j_common_ptr) cinfo); + return TRUE; +} diff --git a/src/3rdparty/libjpeg/jdapistd.c b/src/3rdparty/libjpeg/jdapistd.c new file mode 100644 index 0000000..9d74537 --- /dev/null +++ b/src/3rdparty/libjpeg/jdapistd.c @@ -0,0 +1,275 @@ +/* + * jdapistd.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains application interface code for the decompression half + * of the JPEG library. These are the "standard" API routines that are + * used in the normal full-decompression case. They are not used by a + * transcoding-only application. Note that if an application links in + * jpeg_start_decompress, it will end up linking in the entire decompressor. + * We thus must separate this file from jdapimin.c to avoid linking the + * whole decompression library into a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(boolean) output_pass_setup JPP((j_decompress_ptr cinfo)); + + +/* + * Decompression initialization. + * jpeg_read_header must be completed before calling this. + * + * If a multipass operating mode was selected, this will do all but the + * last pass, and thus may take a great deal of time. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_start_decompress (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize master control, select active modules */ + jinit_master_decompress(cinfo); + if (cinfo->buffered_image) { + /* No more work here; expecting jpeg_start_output next */ + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; + } + cinfo->global_state = DSTATE_PRELOAD; + } + if (cinfo->global_state == DSTATE_PRELOAD) { + /* If file has multiple scans, absorb them all into the coef buffer */ + if (cinfo->inputctl->has_multiple_scans) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return FALSE; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* jdmaster underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + } + cinfo->output_scan_number = cinfo->input_scan_number; + } else if (cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Perform any dummy output passes, and set up for the final pass */ + return output_pass_setup(cinfo); +} + + +/* + * Set up for an output pass, and perform any dummy pass(es) needed. + * Common subroutine for jpeg_start_decompress and jpeg_start_output. + * Entry: global_state = DSTATE_PRESCAN only if previously suspended. + * Exit: If done, returns TRUE and sets global_state for proper output mode. + * If suspended, returns FALSE and sets global_state = DSTATE_PRESCAN. + */ + +LOCAL(boolean) +output_pass_setup (j_decompress_ptr cinfo) +{ + if (cinfo->global_state != DSTATE_PRESCAN) { + /* First call: do pass setup */ + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; + cinfo->global_state = DSTATE_PRESCAN; + } + /* Loop over any required dummy passes */ + while (cinfo->master->is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Crank through the dummy pass */ + while (cinfo->output_scanline < cinfo->output_height) { + JDIMENSION last_scanline; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + /* Process some data */ + last_scanline = cinfo->output_scanline; + (*cinfo->main->process_data) (cinfo, (JSAMPARRAY) NULL, + &cinfo->output_scanline, (JDIMENSION) 0); + if (cinfo->output_scanline == last_scanline) + return FALSE; /* No progress made, must suspend */ + } + /* Finish up dummy pass, and set up for another one */ + (*cinfo->master->finish_output_pass) (cinfo); + (*cinfo->master->prepare_for_output_pass) (cinfo); + cinfo->output_scanline = 0; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } + /* Ready for application to drive output pass through + * jpeg_read_scanlines or jpeg_read_raw_data. + */ + cinfo->global_state = cinfo->raw_data_out ? DSTATE_RAW_OK : DSTATE_SCANNING; + return TRUE; +} + + +/* + * Read some scanlines of data from the JPEG decompressor. + * + * The return value will be the number of lines actually read. + * This may be less than the number requested in several cases, + * including bottom of image, data source suspension, and operating + * modes that emit multiple scanlines at a time. + * + * Note: we warn about excess calls to jpeg_read_scanlines() since + * this likely signals an application programmer error. However, + * an oversize buffer (max_lines > scanlines remaining) is not an error. + */ + +GLOBAL(JDIMENSION) +jpeg_read_scanlines (j_decompress_ptr cinfo, JSAMPARRAY scanlines, + JDIMENSION max_lines) +{ + JDIMENSION row_ctr; + + if (cinfo->global_state != DSTATE_SCANNING) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Process some data */ + row_ctr = 0; + (*cinfo->main->process_data) (cinfo, scanlines, &row_ctr, max_lines); + cinfo->output_scanline += row_ctr; + return row_ctr; +} + + +/* + * Alternate entry point to read raw data. + * Processes exactly one iMCU row per call, unless suspended. + */ + +GLOBAL(JDIMENSION) +jpeg_read_raw_data (j_decompress_ptr cinfo, JSAMPIMAGE data, + JDIMENSION max_lines) +{ + JDIMENSION lines_per_iMCU_row; + + if (cinfo->global_state != DSTATE_RAW_OK) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + if (cinfo->output_scanline >= cinfo->output_height) { + WARNMS(cinfo, JWRN_TOO_MUCH_DATA); + return 0; + } + + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) { + cinfo->progress->pass_counter = (long) cinfo->output_scanline; + cinfo->progress->pass_limit = (long) cinfo->output_height; + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + } + + /* Verify that at least one iMCU row can be returned. */ + lines_per_iMCU_row = cinfo->max_v_samp_factor * cinfo->min_DCT_v_scaled_size; + if (max_lines < lines_per_iMCU_row) + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* Decompress directly into user's buffer. */ + if (! (*cinfo->coef->decompress_data) (cinfo, data)) + return 0; /* suspension forced, can do nothing more */ + + /* OK, we processed one iMCU row. */ + cinfo->output_scanline += lines_per_iMCU_row; + return lines_per_iMCU_row; +} + + +/* Additional entry points for buffered-image mode. */ + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Initialize for an output pass in buffered-image mode. + */ + +GLOBAL(boolean) +jpeg_start_output (j_decompress_ptr cinfo, int scan_number) +{ + if (cinfo->global_state != DSTATE_BUFIMAGE && + cinfo->global_state != DSTATE_PRESCAN) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + /* Limit scan number to valid range */ + if (scan_number <= 0) + scan_number = 1; + if (cinfo->inputctl->eoi_reached && + scan_number > cinfo->input_scan_number) + scan_number = cinfo->input_scan_number; + cinfo->output_scan_number = scan_number; + /* Perform any dummy output passes, and set up for the real pass */ + return output_pass_setup(cinfo); +} + + +/* + * Finish up after an output pass in buffered-image mode. + * + * Returns FALSE if suspended. The return value need be inspected only if + * a suspending data source is used. + */ + +GLOBAL(boolean) +jpeg_finish_output (j_decompress_ptr cinfo) +{ + if ((cinfo->global_state == DSTATE_SCANNING || + cinfo->global_state == DSTATE_RAW_OK) && cinfo->buffered_image) { + /* Terminate this pass. */ + /* We do not require the whole pass to have been completed. */ + (*cinfo->master->finish_output_pass) (cinfo); + cinfo->global_state = DSTATE_BUFPOST; + } else if (cinfo->global_state != DSTATE_BUFPOST) { + /* BUFPOST = repeat call after a suspension, anything else is error */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + } + /* Read markers looking for SOS or EOI */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if ((*cinfo->inputctl->consume_input) (cinfo) == JPEG_SUSPENDED) + return FALSE; /* Suspend, come back later */ + } + cinfo->global_state = DSTATE_BUFIMAGE; + return TRUE; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jdarith.c b/src/3rdparty/libjpeg/jdarith.c new file mode 100644 index 0000000..c858b24 --- /dev/null +++ b/src/3rdparty/libjpeg/jdarith.c @@ -0,0 +1,772 @@ +/* + * jdarith.c + * + * Developed 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains portable arithmetic entropy decoding routines for JPEG + * (implementing the ISO/IEC IS 10918-1 and CCITT Recommendation ITU-T T.81). + * + * Both sequential and progressive modes are supported in this single module. + * + * Suspension is not currently supported in this module. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Expanded entropy decoder object for arithmetic decoding. */ + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + INT32 c; /* C register, base of coding interval + input bit buffer */ + INT32 a; /* A register, normalized size of coding interval */ + int ct; /* bit shift counter, # of bits left in bit buffer part of C */ + /* init: ct = -16 */ + /* run: ct = 0..7 */ + /* error: ct = -1 */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ + int dc_context[MAX_COMPS_IN_SCAN]; /* context index for DC conditioning */ + + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Pointers to statistics areas (these workspaces have image lifespan) */ + unsigned char * dc_stats[NUM_ARITH_TBLS]; + unsigned char * ac_stats[NUM_ARITH_TBLS]; + + /* Statistics bin for coding with fixed probability 0.5 */ + unsigned char fixed_bin[4]; +} arith_entropy_decoder; + +typedef arith_entropy_decoder * arith_entropy_ptr; + +/* The following two definitions specify the allocation chunk size + * for the statistics area. + * According to sections F.1.4.4.1.3 and F.1.4.4.2, we need at least + * 49 statistics bins for DC, and 245 statistics bins for AC coding. + * + * We use a compact representation with 1 byte per statistics bin, + * thus the numbers directly represent byte sizes. + * This 1 byte per statistics bin contains the meaning of the MPS + * (more probable symbol) in the highest bit (mask 0x80), and the + * index into the probability estimation state machine table + * in the lower bits (mask 0x7F). + */ + +#define DC_STAT_BINS 64 +#define AC_STAT_BINS 256 + + +LOCAL(int) +get_byte (j_decompress_ptr cinfo) +/* Read next input byte; we do not support suspension in this module. */ +{ + struct jpeg_source_mgr * src = cinfo->src; + + if (src->bytes_in_buffer == 0) + if (! (*src->fill_input_buffer) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + src->bytes_in_buffer--; + return GETJOCTET(*src->next_input_byte++); +} + + +/* + * The core arithmetic decoding routine (common in JPEG and JBIG). + * This needs to go as fast as possible. + * Machine-dependent optimization facilities + * are not utilized in this portable implementation. + * However, this code should be fairly efficient and + * may be a good base for further optimizations anyway. + * + * Return value is 0 or 1 (binary decision). + * + * Note: I've changed the handling of the code base & bit + * buffer register C compared to other implementations + * based on the standards layout & procedures. + * While it also contains both the actual base of the + * coding interval (16 bits) and the next-bits buffer, + * the cut-point between these two parts is floating + * (instead of fixed) with the bit shift counter CT. + * Thus, we also need only one (variable instead of + * fixed size) shift for the LPS/MPS decision, and + * we can get away with any renormalization update + * of C (except for new data insertion, of course). + * + * I've also introduced a new scheme for accessing + * the probability estimation state machine table, + * derived from Markus Kuhn's JBIG implementation. + */ + +LOCAL(int) +arith_decode (j_decompress_ptr cinfo, unsigned char *st) +{ + register arith_entropy_ptr e = (arith_entropy_ptr) cinfo->entropy; + register unsigned char nl, nm; + register INT32 qe, temp; + register int sv, data; + + /* Renormalization & data input per section D.2.6 */ + while (e->a < 0x8000L) { + if (--e->ct < 0) { + /* Need to fetch next data byte */ + if (cinfo->unread_marker) + data = 0; /* stuff zero data */ + else { + data = get_byte(cinfo); /* read next input byte */ + if (data == 0xFF) { /* zero stuff or marker code */ + do data = get_byte(cinfo); + while (data == 0xFF); /* swallow extra 0xFF bytes */ + if (data == 0) + data = 0xFF; /* discard stuffed zero byte */ + else { + /* Note: Different from the Huffman decoder, hitting + * a marker while processing the compressed data + * segment is legal in arithmetic coding. + * The convention is to supply zero data + * then until decoding is complete. + */ + cinfo->unread_marker = data; + data = 0; + } + } + } + e->c = (e->c << 8) | data; /* insert data into C register */ + if ((e->ct += 8) < 0) /* update bit shift counter */ + /* Need more initial bytes */ + if (++e->ct == 0) + /* Got 2 initial bytes -> re-init A and exit loop */ + e->a = 0x8000L; /* => e->a = 0x10000L after loop exit */ + } + e->a <<= 1; + } + + /* Fetch values from our compact representation of Table D.2: + * Qe values and probability estimation state machine + */ + sv = *st; + qe = jpeg_aritab[sv & 0x7F]; /* => Qe_Value */ + nl = qe & 0xFF; qe >>= 8; /* Next_Index_LPS + Switch_MPS */ + nm = qe & 0xFF; qe >>= 8; /* Next_Index_MPS */ + + /* Decode & estimation procedures per sections D.2.4 & D.2.5 */ + temp = e->a - qe; + e->a = temp; + temp <<= e->ct; + if (e->c >= temp) { + e->c -= temp; + /* Conditional LPS (less probable symbol) exchange */ + if (e->a < qe) { + e->a = qe; + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } else { + e->a = qe; + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } + } else if (e->a < 0x8000L) { + /* Conditional MPS (more probable symbol) exchange */ + if (e->a < qe) { + *st = (sv & 0x80) ^ nl; /* Estimate_after_LPS */ + sv ^= 0x80; /* Exchange LPS/MPS */ + } else { + *st = (sv & 0x80) ^ nm; /* Estimate_after_MPS */ + } + } + + return sv >> 7; +} + + +/* + * Check for a restart marker & resynchronize decoder. + */ + +LOCAL(void) +process_restart (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci; + jpeg_component_info * compptr; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + ERREXIT(cinfo, JERR_CANT_SUSPEND); + + /* Re-initialize statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + MEMZERO(entropy->dc_stats[compptr->dc_tbl_no], DC_STAT_BINS); + /* Reset DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + MEMZERO(entropy->ac_stats[compptr->ac_tbl_no], AC_STAT_BINS); + } + } + + /* Reset arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Arithmetic MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * arithmetic-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign; + int v, m; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + tbl = cinfo->cur_comp_info[ci]->dc_tbl_no; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + /* Scale and output the DC coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (entropy->last_dc_val[ci] << cinfo->Al); + } + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + unsigned char *st; + int tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + /* Figure F.20: Decode_AC_coefficients */ + for (k = cinfo->Ss; k <= cinfo->Se; k++) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + if (arith_decode(cinfo, st)) break; /* EOB flag */ + while (arith_decode(cinfo, st + 1) == 0) { + st += 3; k++; + if (k > cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (v << cinfo->Al); + } + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + unsigned char *st; + int p1, blkn; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + st = entropy->fixed_bin; /* use fixed probability estimation */ + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + /* Encoded data is simply the next bit of the two's-complement DC value */ + if (arith_decode(cinfo, st)) + MCU_data[blkn][0][0] |= p1; + } + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + JBLOCKROW block; + JCOEFPTR thiscoef; + unsigned char *st; + int tbl, k, kex; + int p1, m1; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = cinfo->cur_comp_info[0]->ac_tbl_no; + + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + + /* Establish EOBx (previous stage end-of-block) index */ + for (kex = cinfo->Se; kex > 0; kex--) + if ((*block)[natural_order[kex]]) break; + + for (k = cinfo->Ss; k <= cinfo->Se; k++) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + if (k > kex) + if (arith_decode(cinfo, st)) break; /* EOB flag */ + for (;;) { + thiscoef = *block + natural_order[k]; + if (*thiscoef) { /* previously nonzero coef */ + if (arith_decode(cinfo, st + 2)) { + if (*thiscoef < 0) + *thiscoef += m1; + else + *thiscoef += p1; + } + break; + } + if (arith_decode(cinfo, st + 1)) { /* newly nonzero coef */ + if (arith_decode(cinfo, entropy->fixed_bin)) + *thiscoef = m1; + else + *thiscoef = p1; + break; + } + st += 3; k++; + if (k > cinfo->Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + } + + return TRUE; +} + + +/* + * Decode one MCU's worth of arithmetic-compressed coefficients. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + jpeg_component_info * compptr; + JBLOCKROW block; + unsigned char *st; + int blkn, ci, tbl, sign, k; + int v, m; + const int * natural_order; + + /* Process restart marker if needed */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + process_restart(cinfo); + entropy->restarts_to_go--; + } + + if (entropy->ct == -1) return TRUE; /* if error do nothing */ + + natural_order = cinfo->natural_order; + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + + /* Sections F.2.4.1 & F.1.4.4.1: Decoding of DC coefficients */ + + tbl = compptr->dc_tbl_no; + + /* Table F.4: Point to statistics bin S0 for DC coefficient coding */ + st = entropy->dc_stats[tbl] + entropy->dc_context[ci]; + + /* Figure F.19: Decode_DC_DIFF */ + if (arith_decode(cinfo, st) == 0) + entropy->dc_context[ci] = 0; + else { + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, st + 1); + st += 2; st += sign; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + st = entropy->dc_stats[tbl] + 20; /* Table F.4: X1 = 20 */ + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + /* Section F.1.4.4.1.2: Establish dc_context conditioning category */ + if (m < (int) ((1L << cinfo->arith_dc_L[tbl]) >> 1)) + entropy->dc_context[ci] = 0; /* zero diff category */ + else if (m > (int) ((1L << cinfo->arith_dc_U[tbl]) >> 1)) + entropy->dc_context[ci] = 12 + (sign * 4); /* large diff category */ + else + entropy->dc_context[ci] = 4 + (sign * 4); /* small diff category */ + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + entropy->last_dc_val[ci] += v; + } + + (*block)[0] = (JCOEF) entropy->last_dc_val[ci]; + + /* Sections F.2.4.2 & F.1.4.4.2: Decoding of AC coefficients */ + + tbl = compptr->ac_tbl_no; + + /* Figure F.20: Decode_AC_coefficients */ + for (k = 1; k <= cinfo->lim_Se; k++) { + st = entropy->ac_stats[tbl] + 3 * (k - 1); + if (arith_decode(cinfo, st)) break; /* EOB flag */ + while (arith_decode(cinfo, st + 1) == 0) { + st += 3; k++; + if (k > cinfo->lim_Se) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* spectral overflow */ + return TRUE; + } + } + /* Figure F.21: Decoding nonzero value v */ + /* Figure F.22: Decoding the sign of v */ + sign = arith_decode(cinfo, entropy->fixed_bin); + st += 2; + /* Figure F.23: Decoding the magnitude category of v */ + if ((m = arith_decode(cinfo, st)) != 0) { + if (arith_decode(cinfo, st)) { + m <<= 1; + st = entropy->ac_stats[tbl] + + (k <= cinfo->arith_ac_K[tbl] ? 189 : 217); + while (arith_decode(cinfo, st)) { + if ((m <<= 1) == 0x8000) { + WARNMS(cinfo, JWRN_ARITH_BAD_CODE); + entropy->ct = -1; /* magnitude overflow */ + return TRUE; + } + st += 1; + } + } + } + v = m; + /* Figure F.24: Decoding the magnitude bit pattern of v */ + st += 14; + while (m >>= 1) + if (arith_decode(cinfo, st)) v |= m; + v += 1; if (sign) v = -v; + (*block)[natural_order[k]] = (JCOEF) v; + } + } + + return TRUE; +} + + +/* + * Initialize for an arithmetic-compressed scan. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy = (arith_entropy_ptr) cinfo->entropy; + int ci, tbl; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + (cinfo->Se < DCTSIZE2 && cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + /* Select MCU decoding routine */ + entropy->pub.decode_mcu = decode_mcu; + } + + /* Allocate & initialize requested statistics areas */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + if (! cinfo->progressive_mode || (cinfo->Ss == 0 && cinfo->Ah == 0)) { + tbl = compptr->dc_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->dc_stats[tbl] == NULL) + entropy->dc_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, DC_STAT_BINS); + MEMZERO(entropy->dc_stats[tbl], DC_STAT_BINS); + /* Initialize DC predictions to 0 */ + entropy->last_dc_val[ci] = 0; + entropy->dc_context[ci] = 0; + } + if ((! cinfo->progressive_mode && cinfo->lim_Se) || + (cinfo->progressive_mode && cinfo->Ss)) { + tbl = compptr->ac_tbl_no; + if (tbl < 0 || tbl >= NUM_ARITH_TBLS) + ERREXIT1(cinfo, JERR_NO_ARITH_TABLE, tbl); + if (entropy->ac_stats[tbl] == NULL) + entropy->ac_stats[tbl] = (unsigned char *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, AC_STAT_BINS); + MEMZERO(entropy->ac_stats[tbl], AC_STAT_BINS); + } + } + + /* Initialize arithmetic decoding variables */ + entropy->c = 0; + entropy->a = 0; + entropy->ct = -16; /* force reading 2 initial bytes to fill C */ + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Module initialization routine for arithmetic entropy decoding. + */ + +GLOBAL(void) +jinit_arith_decoder (j_decompress_ptr cinfo) +{ + arith_entropy_ptr entropy; + int i; + + entropy = (arith_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(arith_entropy_decoder)); + cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; + entropy->pub.start_pass = start_pass; + + /* Mark tables unallocated */ + for (i = 0; i < NUM_ARITH_TBLS; i++) { + entropy->dc_stats[i] = NULL; + entropy->ac_stats[i] = NULL; + } + + /* Initialize index for fixed probability estimation */ + entropy->fixed_bin[0] = 113; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + } +} diff --git a/src/3rdparty/libjpeg/jdatadst.c b/src/3rdparty/libjpeg/jdatadst.c new file mode 100644 index 0000000..472d5f3 --- /dev/null +++ b/src/3rdparty/libjpeg/jdatadst.c @@ -0,0 +1,267 @@ +/* + * jdatadst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains compression data destination routines for the case of + * emitting JPEG data to memory or to a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different destination manager. + * IMPORTANT: we assume that fwrite() will correctly transcribe an array of + * JOCTETs into 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + + +/* Expanded data destination object for stdio output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + FILE * outfile; /* target stream */ + JOCTET * buffer; /* start of buffer */ +} my_destination_mgr; + +typedef my_destination_mgr * my_dest_ptr; + +#define OUTPUT_BUF_SIZE 4096 /* choose an efficiently fwrite'able size */ + + +/* Expanded data destination object for memory output */ + +typedef struct { + struct jpeg_destination_mgr pub; /* public fields */ + + unsigned char ** outbuffer; /* target buffer */ + unsigned long * outsize; + unsigned char * newbuffer; /* newly allocated buffer */ + JOCTET * buffer; /* start of buffer */ + size_t bufsize; +} my_mem_destination_mgr; + +typedef my_mem_destination_mgr * my_mem_dest_ptr; + + +/* + * Initialize destination --- called by jpeg_start_compress + * before any data is actually written. + */ + +METHODDEF(void) +init_destination (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + + /* Allocate the output buffer --- it will be released when done with image */ + dest->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + OUTPUT_BUF_SIZE * SIZEOF(JOCTET)); + + dest->pub.next_output_byte = dest->buffer; + dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; +} + +METHODDEF(void) +init_mem_destination (j_compress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Empty the output buffer --- called whenever buffer fills up. + * + * In typical applications, this should write the entire output buffer + * (ignoring the current state of next_output_byte & free_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been dumped. + * + * In applications that need to be able to suspend compression due to output + * overrun, a FALSE return indicates that the buffer cannot be emptied now. + * In this situation, the compressor will return to its caller (possibly with + * an indication that it has not accepted all the supplied scanlines). The + * application should resume compression after it has made more room in the + * output buffer. Note that there are substantial restrictions on the use of + * suspension --- see the documentation. + * + * When suspending, the compressor will back up to a convenient restart point + * (typically the start of the current MCU). next_output_byte & free_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point will be regenerated after resumption, so do not + * write it out when emptying the buffer externally. + */ + +METHODDEF(boolean) +empty_output_buffer (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + + if (JFWRITE(dest->outfile, dest->buffer, OUTPUT_BUF_SIZE) != + (size_t) OUTPUT_BUF_SIZE) + ERREXIT(cinfo, JERR_FILE_WRITE); + + dest->pub.next_output_byte = dest->buffer; + dest->pub.free_in_buffer = OUTPUT_BUF_SIZE; + + return TRUE; +} + +METHODDEF(boolean) +empty_mem_output_buffer (j_compress_ptr cinfo) +{ + size_t nextsize; + JOCTET * nextbuffer; + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + /* Try to allocate new buffer with double size */ + nextsize = dest->bufsize * 2; + nextbuffer = malloc(nextsize); + + if (nextbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + + MEMCOPY(nextbuffer, dest->buffer, dest->bufsize); + + if (dest->newbuffer != NULL) + free(dest->newbuffer); + + dest->newbuffer = nextbuffer; + + dest->pub.next_output_byte = nextbuffer + dest->bufsize; + dest->pub.free_in_buffer = dest->bufsize; + + dest->buffer = nextbuffer; + dest->bufsize = nextsize; + + return TRUE; +} + + +/* + * Terminate destination --- called by jpeg_finish_compress + * after all data has been written. Usually needs to flush buffer. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF(void) +term_destination (j_compress_ptr cinfo) +{ + my_dest_ptr dest = (my_dest_ptr) cinfo->dest; + size_t datacount = OUTPUT_BUF_SIZE - dest->pub.free_in_buffer; + + /* Write any data remaining in the buffer */ + if (datacount > 0) { + if (JFWRITE(dest->outfile, dest->buffer, datacount) != datacount) + ERREXIT(cinfo, JERR_FILE_WRITE); + } + fflush(dest->outfile); + /* Make sure we wrote the output file OK */ + if (ferror(dest->outfile)) + ERREXIT(cinfo, JERR_FILE_WRITE); +} + +METHODDEF(void) +term_mem_destination (j_compress_ptr cinfo) +{ + my_mem_dest_ptr dest = (my_mem_dest_ptr) cinfo->dest; + + *dest->outbuffer = dest->buffer; + *dest->outsize = dest->bufsize - dest->pub.free_in_buffer; +} + + +/* + * Prepare for output to a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing compression. + */ + +GLOBAL(void) +jpeg_stdio_dest (j_compress_ptr cinfo, FILE * outfile) +{ + my_dest_ptr dest; + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same file without re-executing jpeg_stdio_dest. + * This makes it dangerous to use this manager and a different destination + * manager serially with the same JPEG object, because their private object + * sizes may be different. Caveat programmer. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_destination_mgr)); + } + + dest = (my_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_destination; + dest->pub.empty_output_buffer = empty_output_buffer; + dest->pub.term_destination = term_destination; + dest->outfile = outfile; +} + + +/* + * Prepare for output to a memory buffer. + * The caller may supply an own initial buffer with appropriate size. + * Otherwise, or when the actual data output exceeds the given size, + * the library adapts the buffer size as necessary. + * The standard library functions malloc/free are used for allocating + * larger memory, so the buffer is available to the application after + * finishing compression, and then the application is responsible for + * freeing the requested memory. + */ + +GLOBAL(void) +jpeg_mem_dest (j_compress_ptr cinfo, + unsigned char ** outbuffer, unsigned long * outsize) +{ + my_mem_dest_ptr dest; + + if (outbuffer == NULL || outsize == NULL) /* sanity check */ + ERREXIT(cinfo, JERR_BUFFER_SIZE); + + /* The destination object is made permanent so that multiple JPEG images + * can be written to the same buffer without re-executing jpeg_mem_dest. + */ + if (cinfo->dest == NULL) { /* first time for this JPEG object? */ + cinfo->dest = (struct jpeg_destination_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_mem_destination_mgr)); + } + + dest = (my_mem_dest_ptr) cinfo->dest; + dest->pub.init_destination = init_mem_destination; + dest->pub.empty_output_buffer = empty_mem_output_buffer; + dest->pub.term_destination = term_mem_destination; + dest->outbuffer = outbuffer; + dest->outsize = outsize; + dest->newbuffer = NULL; + + if (*outbuffer == NULL || *outsize == 0) { + /* Allocate initial buffer */ + dest->newbuffer = *outbuffer = malloc(OUTPUT_BUF_SIZE); + if (dest->newbuffer == NULL) + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 10); + *outsize = OUTPUT_BUF_SIZE; + } + + dest->pub.next_output_byte = dest->buffer = *outbuffer; + dest->pub.free_in_buffer = dest->bufsize = *outsize; +} diff --git a/src/3rdparty/libjpeg/jdatasrc.c b/src/3rdparty/libjpeg/jdatasrc.c new file mode 100644 index 0000000..d3136db --- /dev/null +++ b/src/3rdparty/libjpeg/jdatasrc.c @@ -0,0 +1,274 @@ +/* + * jdatasrc.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains decompression data source routines for the case of + * reading JPEG data from memory or from a file (or any stdio stream). + * While these routines are sufficient for most applications, + * some will want to use a different source manager. + * IMPORTANT: we assume that fread() will correctly transcribe an array of + * JOCTETs from 8-bit-wide elements on external storage. If char is wider + * than 8 bits on your machine, you may need to do some tweaking. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jerror.h" + + +/* Expanded data source object for stdio input */ + +typedef struct { + struct jpeg_source_mgr pub; /* public fields */ + + FILE * infile; /* source stream */ + JOCTET * buffer; /* start of buffer */ + boolean start_of_file; /* have we gotten any data yet? */ +} my_source_mgr; + +typedef my_source_mgr * my_src_ptr; + +#define INPUT_BUF_SIZE 4096 /* choose an efficiently fread'able size */ + + +/* + * Initialize source --- called by jpeg_read_header + * before any data is actually read. + */ + +METHODDEF(void) +init_source (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + + /* We reset the empty-input-file flag for each image, + * but we don't clear the input buffer. + * This is correct behavior for reading a series of images from one source. + */ + src->start_of_file = TRUE; +} + +METHODDEF(void) +init_mem_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Fill the input buffer --- called whenever buffer is emptied. + * + * In typical applications, this should read fresh data into the buffer + * (ignoring the current state of next_input_byte & bytes_in_buffer), + * reset the pointer & count to the start of the buffer, and return TRUE + * indicating that the buffer has been reloaded. It is not necessary to + * fill the buffer entirely, only to obtain at least one more byte. + * + * There is no such thing as an EOF return. If the end of the file has been + * reached, the routine has a choice of ERREXIT() or inserting fake data into + * the buffer. In most cases, generating a warning message and inserting a + * fake EOI marker is the best course of action --- this will allow the + * decompressor to output however much of the image is there. However, + * the resulting error message is misleading if the real problem is an empty + * input file, so we handle that case specially. + * + * In applications that need to be able to suspend compression due to input + * not being available yet, a FALSE return indicates that no more data can be + * obtained right now, but more may be forthcoming later. In this situation, + * the decompressor will return to its caller (with an indication of the + * number of scanlines it has read, if any). The application should resume + * decompression after it has loaded more data into the input buffer. Note + * that there are substantial restrictions on the use of suspension --- see + * the documentation. + * + * When suspending, the decompressor will back up to a convenient restart point + * (typically the start of the current MCU). next_input_byte & bytes_in_buffer + * indicate where the restart point will be if the current call returns FALSE. + * Data beyond this point must be rescanned after resumption, so move it to + * the front of the buffer rather than discarding it. + */ + +METHODDEF(boolean) +fill_input_buffer (j_decompress_ptr cinfo) +{ + my_src_ptr src = (my_src_ptr) cinfo->src; + size_t nbytes; + + nbytes = JFREAD(src->infile, src->buffer, INPUT_BUF_SIZE); + + if (nbytes <= 0) { + if (src->start_of_file) /* Treat empty input file as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + WARNMS(cinfo, JWRN_JPEG_EOF); + /* Insert a fake EOI marker */ + src->buffer[0] = (JOCTET) 0xFF; + src->buffer[1] = (JOCTET) JPEG_EOI; + nbytes = 2; + } + + src->pub.next_input_byte = src->buffer; + src->pub.bytes_in_buffer = nbytes; + src->start_of_file = FALSE; + + return TRUE; +} + +METHODDEF(boolean) +fill_mem_input_buffer (j_decompress_ptr cinfo) +{ + static JOCTET mybuffer[4]; + + /* The whole JPEG data is expected to reside in the supplied memory + * buffer, so any request for more data beyond the given buffer size + * is treated as an error. + */ + WARNMS(cinfo, JWRN_JPEG_EOF); + /* Insert a fake EOI marker */ + mybuffer[0] = (JOCTET) 0xFF; + mybuffer[1] = (JOCTET) JPEG_EOI; + + cinfo->src->next_input_byte = mybuffer; + cinfo->src->bytes_in_buffer = 2; + + return TRUE; +} + + +/* + * Skip data --- used to skip over a potentially large amount of + * uninteresting data (such as an APPn marker). + * + * Writers of suspendable-input applications must note that skip_input_data + * is not granted the right to give a suspension return. If the skip extends + * beyond the data currently in the buffer, the buffer can be marked empty so + * that the next read will cause a fill_input_buffer call that can suspend. + * Arranging for additional bytes to be discarded before reloading the input + * buffer is the application writer's problem. + */ + +METHODDEF(void) +skip_input_data (j_decompress_ptr cinfo, long num_bytes) +{ + struct jpeg_source_mgr * src = cinfo->src; + + /* Just a dumb implementation for now. Could use fseek() except + * it doesn't work on pipes. Not clear that being smart is worth + * any trouble anyway --- large skips are infrequent. + */ + if (num_bytes > 0) { + while (num_bytes > (long) src->bytes_in_buffer) { + num_bytes -= (long) src->bytes_in_buffer; + (void) fill_input_buffer(cinfo); + /* note we assume that fill_input_buffer will never return FALSE, + * so suspension need not be handled. + */ + } + src->next_input_byte += (size_t) num_bytes; + src->bytes_in_buffer -= (size_t) num_bytes; + } +} + + +/* + * An additional method that can be provided by data source modules is the + * resync_to_restart method for error recovery in the presence of RST markers. + * For the moment, this source module just uses the default resync method + * provided by the JPEG library. That method assumes that no backtracking + * is possible. + */ + + +/* + * Terminate source --- called by jpeg_finish_decompress + * after all data has been read. Often a no-op. + * + * NB: *not* called by jpeg_abort or jpeg_destroy; surrounding + * application must deal with any cleanup that should happen even + * for error exit. + */ + +METHODDEF(void) +term_source (j_decompress_ptr cinfo) +{ + /* no work necessary here */ +} + + +/* + * Prepare for input from a stdio stream. + * The caller must have already opened the stream, and is responsible + * for closing it after finishing decompression. + */ + +GLOBAL(void) +jpeg_stdio_src (j_decompress_ptr cinfo, FILE * infile) +{ + my_src_ptr src; + + /* The source object and input buffer are made permanent so that a series + * of JPEG images can be read from the same file by calling jpeg_stdio_src + * only before the first one. (If we discarded the buffer at the end of + * one image, we'd likely lose the start of the next one.) + * This makes it unsafe to use this manager and a different source + * manager serially with the same JPEG object. Caveat programmer. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_source_mgr)); + src = (my_src_ptr) cinfo->src; + src->buffer = (JOCTET *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + INPUT_BUF_SIZE * SIZEOF(JOCTET)); + } + + src = (my_src_ptr) cinfo->src; + src->pub.init_source = init_source; + src->pub.fill_input_buffer = fill_input_buffer; + src->pub.skip_input_data = skip_input_data; + src->pub.resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->pub.term_source = term_source; + src->infile = infile; + src->pub.bytes_in_buffer = 0; /* forces fill_input_buffer on first read */ + src->pub.next_input_byte = NULL; /* until buffer loaded */ +} + + +/* + * Prepare for input from a supplied memory buffer. + * The buffer must contain the whole JPEG data. + */ + +GLOBAL(void) +jpeg_mem_src (j_decompress_ptr cinfo, + unsigned char * inbuffer, unsigned long insize) +{ + struct jpeg_source_mgr * src; + + if (inbuffer == NULL || insize == 0) /* Treat empty input as fatal error */ + ERREXIT(cinfo, JERR_INPUT_EMPTY); + + /* The source object is made permanent so that a series of JPEG images + * can be read from the same buffer by calling jpeg_mem_src only before + * the first one. + */ + if (cinfo->src == NULL) { /* first time for this JPEG object? */ + cinfo->src = (struct jpeg_source_mgr *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(struct jpeg_source_mgr)); + } + + src = cinfo->src; + src->init_source = init_mem_source; + src->fill_input_buffer = fill_mem_input_buffer; + src->skip_input_data = skip_input_data; + src->resync_to_restart = jpeg_resync_to_restart; /* use default method */ + src->term_source = term_source; + src->bytes_in_buffer = (size_t) insize; + src->next_input_byte = (JOCTET *) inbuffer; +} diff --git a/src/3rdparty/libjpeg/jdcoefct.c b/src/3rdparty/libjpeg/jdcoefct.c new file mode 100644 index 0000000..462e92c --- /dev/null +++ b/src/3rdparty/libjpeg/jdcoefct.c @@ -0,0 +1,736 @@ +/* + * jdcoefct.c + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the coefficient buffer controller for decompression. + * This controller is the top level of the JPEG decompressor proper. + * The coefficient buffer lies between entropy decoding and inverse-DCT steps. + * + * In buffered-image mode, this controller is the interface between + * input-oriented processing and output-oriented processing. + * Also, the input side (only) is used when reading a file for transcoding. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +/* Block smoothing is only applicable for progressive JPEG, so: */ +#ifndef D_PROGRESSIVE_SUPPORTED +#undef BLOCK_SMOOTHING_SUPPORTED +#endif + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_coef_controller pub; /* public fields */ + + /* These variables keep track of the current location of the input side. */ + /* cinfo->input_iMCU_row is also used for this. */ + JDIMENSION MCU_ctr; /* counts MCUs processed in current row */ + int MCU_vert_offset; /* counts MCU rows within iMCU row */ + int MCU_rows_per_iMCU_row; /* number of such rows needed */ + + /* The output side's location is represented by cinfo->output_iMCU_row. */ + + /* In single-pass modes, it's sufficient to buffer just one MCU. + * We allocate a workspace of D_MAX_BLOCKS_IN_MCU coefficient blocks, + * and let the entropy decoder write into that workspace each time. + * (On 80x86, the workspace is FAR even though it's not really very big; + * this is to keep the module interfaces unchanged when a large coefficient + * buffer is necessary.) + * In multi-pass modes, this array points to the current MCU's blocks + * within the virtual arrays; it is used only by the input side. + */ + JBLOCKROW MCU_buffer[D_MAX_BLOCKS_IN_MCU]; + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* In multi-pass modes, we need a virtual block array for each component. */ + jvirt_barray_ptr whole_image[MAX_COMPONENTS]; +#endif + +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* When doing block smoothing, we latch coefficient Al values here */ + int * coef_bits_latch; +#define SAVED_COEFS 6 /* we save coef_bits[0..5] */ +#endif +} my_coef_controller; + +typedef my_coef_controller * my_coef_ptr; + +/* Forward declarations */ +METHODDEF(int) decompress_onepass + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#ifdef D_MULTISCAN_FILES_SUPPORTED +METHODDEF(int) decompress_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif +#ifdef BLOCK_SMOOTHING_SUPPORTED +LOCAL(boolean) smoothing_ok JPP((j_decompress_ptr cinfo)); +METHODDEF(int) decompress_smooth_data + JPP((j_decompress_ptr cinfo, JSAMPIMAGE output_buf)); +#endif + + +LOCAL(void) +start_iMCU_row (j_decompress_ptr cinfo) +/* Reset within-iMCU-row counters for a new row (input side) */ +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* In an interleaved scan, an MCU row is the same as an iMCU row. + * In a noninterleaved scan, an iMCU row has v_samp_factor MCU rows. + * But at the bottom of the image, process only what's left. + */ + if (cinfo->comps_in_scan > 1) { + coef->MCU_rows_per_iMCU_row = 1; + } else { + if (cinfo->input_iMCU_row < (cinfo->total_iMCU_rows-1)) + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->v_samp_factor; + else + coef->MCU_rows_per_iMCU_row = cinfo->cur_comp_info[0]->last_row_height; + } + + coef->MCU_ctr = 0; + coef->MCU_vert_offset = 0; +} + + +/* + * Initialize for an input processing pass. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + cinfo->input_iMCU_row = 0; + start_iMCU_row(cinfo); +} + + +/* + * Initialize for an output processing pass. + */ + +METHODDEF(void) +start_output_pass (j_decompress_ptr cinfo) +{ +#ifdef BLOCK_SMOOTHING_SUPPORTED + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + + /* If multipass, check to see whether to use block smoothing on this pass */ + if (coef->pub.coef_arrays != NULL) { + if (cinfo->do_block_smoothing && smoothing_ok(cinfo)) + coef->pub.decompress_data = decompress_smooth_data; + else + coef->pub.decompress_data = decompress_data; + } +#endif + cinfo->output_iMCU_row = 0; +} + + +/* + * Decompress and return some data in the single-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Input and output must run in lockstep since we have only a one-MCU buffer. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image, + * which we index according to the component's SOF position. + */ + +METHODDEF(int) +decompress_onepass (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + JDIMENSION last_MCU_col = cinfo->MCUs_per_row - 1; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + int blkn, ci, xindex, yindex, yoffset, useful_width; + JSAMPARRAY output_ptr; + JDIMENSION start_col, output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Loop to process as much as one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num <= last_MCU_col; + MCU_col_num++) { + /* Try to fetch an MCU. Entropy decoder expects buffer to be zeroed. */ + jzero_far((void FAR *) coef->MCU_buffer[0], + (size_t) (cinfo->blocks_in_MCU * SIZEOF(JBLOCK))); + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + /* Determine where data should go in output_buf and do the IDCT thing. + * We skip dummy blocks at the right and bottom edges (but blkn gets + * incremented past them!). Note the inner loop relies on having + * allocated the MCU_buffer[] blocks sequentially. + */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) { + blkn += compptr->MCU_blocks; + continue; + } + inverse_DCT = cinfo->idct->inverse_DCT[compptr->component_index]; + useful_width = (MCU_col_num < last_MCU_col) ? compptr->MCU_width + : compptr->last_col_width; + output_ptr = output_buf[compptr->component_index] + + yoffset * compptr->DCT_v_scaled_size; + start_col = MCU_col_num * compptr->MCU_sample_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + if (cinfo->input_iMCU_row < last_iMCU_row || + yoffset+yindex < compptr->last_row_height) { + output_col = start_col; + for (xindex = 0; xindex < useful_width; xindex++) { + (*inverse_DCT) (cinfo, compptr, + (JCOEFPTR) coef->MCU_buffer[blkn+xindex], + output_ptr, output_col); + output_col += compptr->DCT_h_scaled_size; + } + } + blkn += compptr->MCU_width; + output_ptr += compptr->DCT_v_scaled_size; + } + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + cinfo->output_iMCU_row++; + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Dummy consume-input routine for single-pass operation. + */ + +METHODDEF(int) +dummy_consume_data (j_decompress_ptr cinfo) +{ + return JPEG_SUSPENDED; /* Always indicate nothing was done */ +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Consume input data and store it in the full-image coefficient buffer. + * We read as much as one fully interleaved MCU row ("iMCU" row) per call, + * ie, v_samp_factor block rows for each component in the scan. + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + */ + +METHODDEF(int) +consume_data (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION MCU_col_num; /* index of current MCU within row */ + int blkn, ci, xindex, yindex, yoffset; + JDIMENSION start_col; + JBLOCKARRAY buffer[MAX_COMPS_IN_SCAN]; + JBLOCKROW buffer_ptr; + jpeg_component_info *compptr; + + /* Align the virtual buffers for the components used in this scan. */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + buffer[ci] = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[compptr->component_index], + cinfo->input_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, TRUE); + /* Note: entropy decoder expects buffer to be zeroed, + * but this is handled automatically by the memory manager + * because we requested a pre-zeroed array. + */ + } + + /* Loop to process one whole iMCU row */ + for (yoffset = coef->MCU_vert_offset; yoffset < coef->MCU_rows_per_iMCU_row; + yoffset++) { + for (MCU_col_num = coef->MCU_ctr; MCU_col_num < cinfo->MCUs_per_row; + MCU_col_num++) { + /* Construct list of pointers to DCT blocks belonging to this MCU */ + blkn = 0; /* index of current DCT block within MCU */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + start_col = MCU_col_num * compptr->MCU_width; + for (yindex = 0; yindex < compptr->MCU_height; yindex++) { + buffer_ptr = buffer[ci][yindex+yoffset] + start_col; + for (xindex = 0; xindex < compptr->MCU_width; xindex++) { + coef->MCU_buffer[blkn++] = buffer_ptr++; + } + } + } + /* Try to fetch the MCU. */ + if (! (*cinfo->entropy->decode_mcu) (cinfo, coef->MCU_buffer)) { + /* Suspension forced; update state counters and exit */ + coef->MCU_vert_offset = yoffset; + coef->MCU_ctr = MCU_col_num; + return JPEG_SUSPENDED; + } + } + /* Completed an MCU row, but perhaps not an iMCU row */ + coef->MCU_ctr = 0; + } + /* Completed the iMCU row, advance counters for next one */ + if (++(cinfo->input_iMCU_row) < cinfo->total_iMCU_rows) { + start_iMCU_row(cinfo); + return JPEG_ROW_COMPLETED; + } + /* Completed the scan */ + (*cinfo->inputctl->finish_input_pass) (cinfo); + return JPEG_SCAN_COMPLETED; +} + + +/* + * Decompress and return some data in the multi-pass case. + * Always attempts to emit one fully interleaved MCU row ("iMCU" row). + * Return value is JPEG_ROW_COMPLETED, JPEG_SCAN_COMPLETED, or JPEG_SUSPENDED. + * + * NB: output_buf contains a plane for each component in image. + */ + +METHODDEF(int) +decompress_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num; + int ci, block_row, block_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number < cinfo->output_scan_number || + (cinfo->input_scan_number == cinfo->output_scan_number && + cinfo->input_iMCU_row <= cinfo->output_iMCU_row)) { + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Align the virtual buffer for this component. */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + cinfo->output_iMCU_row * compptr->v_samp_factor, + (JDIMENSION) compptr->v_samp_factor, FALSE); + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) + block_rows = compptr->v_samp_factor; + else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + } + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + output_col = 0; + for (block_num = 0; block_num < compptr->width_in_blocks; block_num++) { + (*inverse_DCT) (cinfo, compptr, (JCOEFPTR) buffer_ptr, + output_ptr, output_col); + buffer_ptr++; + output_col += compptr->DCT_h_scaled_size; + } + output_ptr += compptr->DCT_v_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +#ifdef BLOCK_SMOOTHING_SUPPORTED + +/* + * This code applies interblock smoothing as described by section K.8 + * of the JPEG standard: the first 5 AC coefficients are estimated from + * the DC values of a DCT block and its 8 neighboring blocks. + * We apply smoothing only for progressive JPEG decoding, and only if + * the coefficients it can estimate are not yet known to full precision. + */ + +/* Natural-order array positions of the first 5 zigzag-order coefficients */ +#define Q01_POS 1 +#define Q10_POS 8 +#define Q20_POS 16 +#define Q11_POS 9 +#define Q02_POS 2 + +/* + * Determine whether block smoothing is applicable and safe. + * We also latch the current states of the coef_bits[] entries for the + * AC coefficients; otherwise, if the input side of the decompressor + * advances into a new scan, we might think the coefficients are known + * more accurately than they really are. + */ + +LOCAL(boolean) +smoothing_ok (j_decompress_ptr cinfo) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + boolean smoothing_useful = FALSE; + int ci, coefi; + jpeg_component_info *compptr; + JQUANT_TBL * qtable; + int * coef_bits; + int * coef_bits_latch; + + if (! cinfo->progressive_mode || cinfo->coef_bits == NULL) + return FALSE; + + /* Allocate latch area if not already done */ + if (coef->coef_bits_latch == NULL) + coef->coef_bits_latch = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * + (SAVED_COEFS * SIZEOF(int))); + coef_bits_latch = coef->coef_bits_latch; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* All components' quantization values must already be latched. */ + if ((qtable = compptr->quant_table) == NULL) + return FALSE; + /* Verify DC & first 5 AC quantizers are nonzero to avoid zero-divide. */ + if (qtable->quantval[0] == 0 || + qtable->quantval[Q01_POS] == 0 || + qtable->quantval[Q10_POS] == 0 || + qtable->quantval[Q20_POS] == 0 || + qtable->quantval[Q11_POS] == 0 || + qtable->quantval[Q02_POS] == 0) + return FALSE; + /* DC values must be at least partly known for all components. */ + coef_bits = cinfo->coef_bits[ci]; + if (coef_bits[0] < 0) + return FALSE; + /* Block smoothing is helpful if some AC coefficients remain inaccurate. */ + for (coefi = 1; coefi <= 5; coefi++) { + coef_bits_latch[coefi] = coef_bits[coefi]; + if (coef_bits[coefi] != 0) + smoothing_useful = TRUE; + } + coef_bits_latch += SAVED_COEFS; + } + + return smoothing_useful; +} + + +/* + * Variant of decompress_data for use when doing block smoothing. + */ + +METHODDEF(int) +decompress_smooth_data (j_decompress_ptr cinfo, JSAMPIMAGE output_buf) +{ + my_coef_ptr coef = (my_coef_ptr) cinfo->coef; + JDIMENSION last_iMCU_row = cinfo->total_iMCU_rows - 1; + JDIMENSION block_num, last_block_column; + int ci, block_row, block_rows, access_rows; + JBLOCKARRAY buffer; + JBLOCKROW buffer_ptr, prev_block_row, next_block_row; + JSAMPARRAY output_ptr; + JDIMENSION output_col; + jpeg_component_info *compptr; + inverse_DCT_method_ptr inverse_DCT; + boolean first_row, last_row; + JBLOCK workspace; + int *coef_bits; + JQUANT_TBL *quanttbl; + INT32 Q00,Q01,Q02,Q10,Q11,Q20, num; + int DC1,DC2,DC3,DC4,DC5,DC6,DC7,DC8,DC9; + int Al, pred; + + /* Force some input to be done if we are getting ahead of the input. */ + while (cinfo->input_scan_number <= cinfo->output_scan_number && + ! cinfo->inputctl->eoi_reached) { + if (cinfo->input_scan_number == cinfo->output_scan_number) { + /* If input is working on current scan, we ordinarily want it to + * have completed the current row. But if input scan is DC, + * we want it to keep one row ahead so that next block row's DC + * values are up to date. + */ + JDIMENSION delta = (cinfo->Ss == 0) ? 1 : 0; + if (cinfo->input_iMCU_row > cinfo->output_iMCU_row+delta) + break; + } + if ((*cinfo->inputctl->consume_input)(cinfo) == JPEG_SUSPENDED) + return JPEG_SUSPENDED; + } + + /* OK, output from the virtual arrays. */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Don't bother to IDCT an uninteresting component. */ + if (! compptr->component_needed) + continue; + /* Count non-dummy DCT block rows in this iMCU row. */ + if (cinfo->output_iMCU_row < last_iMCU_row) { + block_rows = compptr->v_samp_factor; + access_rows = block_rows * 2; /* this and next iMCU row */ + last_row = FALSE; + } else { + /* NB: can't use last_row_height here; it is input-side-dependent! */ + block_rows = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (block_rows == 0) block_rows = compptr->v_samp_factor; + access_rows = block_rows; /* this iMCU row only */ + last_row = TRUE; + } + /* Align the virtual buffer for this component. */ + if (cinfo->output_iMCU_row > 0) { + access_rows += compptr->v_samp_factor; /* prior iMCU row too */ + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (cinfo->output_iMCU_row - 1) * compptr->v_samp_factor, + (JDIMENSION) access_rows, FALSE); + buffer += compptr->v_samp_factor; /* point to current iMCU row */ + first_row = FALSE; + } else { + buffer = (*cinfo->mem->access_virt_barray) + ((j_common_ptr) cinfo, coef->whole_image[ci], + (JDIMENSION) 0, (JDIMENSION) access_rows, FALSE); + first_row = TRUE; + } + /* Fetch component-dependent info */ + coef_bits = coef->coef_bits_latch + (ci * SAVED_COEFS); + quanttbl = compptr->quant_table; + Q00 = quanttbl->quantval[0]; + Q01 = quanttbl->quantval[Q01_POS]; + Q10 = quanttbl->quantval[Q10_POS]; + Q20 = quanttbl->quantval[Q20_POS]; + Q11 = quanttbl->quantval[Q11_POS]; + Q02 = quanttbl->quantval[Q02_POS]; + inverse_DCT = cinfo->idct->inverse_DCT[ci]; + output_ptr = output_buf[ci]; + /* Loop over all DCT blocks to be processed. */ + for (block_row = 0; block_row < block_rows; block_row++) { + buffer_ptr = buffer[block_row]; + if (first_row && block_row == 0) + prev_block_row = buffer_ptr; + else + prev_block_row = buffer[block_row-1]; + if (last_row && block_row == block_rows-1) + next_block_row = buffer_ptr; + else + next_block_row = buffer[block_row+1]; + /* We fetch the surrounding DC values using a sliding-register approach. + * Initialize all nine here so as to do the right thing on narrow pics. + */ + DC1 = DC2 = DC3 = (int) prev_block_row[0][0]; + DC4 = DC5 = DC6 = (int) buffer_ptr[0][0]; + DC7 = DC8 = DC9 = (int) next_block_row[0][0]; + output_col = 0; + last_block_column = compptr->width_in_blocks - 1; + for (block_num = 0; block_num <= last_block_column; block_num++) { + /* Fetch current DCT block into workspace so we can modify it. */ + jcopy_block_row(buffer_ptr, (JBLOCKROW) workspace, (JDIMENSION) 1); + /* Update DC values */ + if (block_num < last_block_column) { + DC3 = (int) prev_block_row[1][0]; + DC6 = (int) buffer_ptr[1][0]; + DC9 = (int) next_block_row[1][0]; + } + /* Compute coefficient estimates per K.8. + * An estimate is applied only if coefficient is still zero, + * and is not known to be fully accurate. + */ + /* AC01 */ + if ((Al=coef_bits[1]) != 0 && workspace[1] == 0) { + num = 36 * Q00 * (DC4 - DC6); + if (num >= 0) { + pred = (int) (((Q01<<7) + num) / (Q01<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q10<<7) + num) / (Q10<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q20<<7) + num) / (Q20<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q11<<7) + num) / (Q11<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<= 0) { + pred = (int) (((Q02<<7) + num) / (Q02<<8)); + if (Al > 0 && pred >= (1< 0 && pred >= (1<DCT_h_scaled_size; + } + output_ptr += compptr->DCT_v_scaled_size; + } + } + + if (++(cinfo->output_iMCU_row) < cinfo->total_iMCU_rows) + return JPEG_ROW_COMPLETED; + return JPEG_SCAN_COMPLETED; +} + +#endif /* BLOCK_SMOOTHING_SUPPORTED */ + + +/* + * Initialize coefficient buffer controller. + */ + +GLOBAL(void) +jinit_d_coef_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_coef_ptr coef; + + coef = (my_coef_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_coef_controller)); + cinfo->coef = (struct jpeg_d_coef_controller *) coef; + coef->pub.start_input_pass = start_input_pass; + coef->pub.start_output_pass = start_output_pass; +#ifdef BLOCK_SMOOTHING_SUPPORTED + coef->coef_bits_latch = NULL; +#endif + + /* Create the coefficient buffer. */ + if (need_full_buffer) { +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* Allocate a full-image virtual array for each component, */ + /* padded to a multiple of samp_factor DCT blocks in each direction. */ + /* Note we ask for a pre-zeroed array. */ + int ci, access_rows; + jpeg_component_info *compptr; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + access_rows = compptr->v_samp_factor; +#ifdef BLOCK_SMOOTHING_SUPPORTED + /* If block smoothing could be used, need a bigger window */ + if (cinfo->progressive_mode) + access_rows *= 3; +#endif + coef->whole_image[ci] = (*cinfo->mem->request_virt_barray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, TRUE, + (JDIMENSION) jround_up((long) compptr->width_in_blocks, + (long) compptr->h_samp_factor), + (JDIMENSION) jround_up((long) compptr->height_in_blocks, + (long) compptr->v_samp_factor), + (JDIMENSION) access_rows); + } + coef->pub.consume_data = consume_data; + coef->pub.decompress_data = decompress_data; + coef->pub.coef_arrays = coef->whole_image; /* link to virtual arrays */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + /* We only need a single-MCU buffer. */ + JBLOCKROW buffer; + int i; + + buffer = (JBLOCKROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + D_MAX_BLOCKS_IN_MCU * SIZEOF(JBLOCK)); + for (i = 0; i < D_MAX_BLOCKS_IN_MCU; i++) { + coef->MCU_buffer[i] = buffer + i; + } + coef->pub.consume_data = dummy_consume_data; + coef->pub.decompress_data = decompress_onepass; + coef->pub.coef_arrays = NULL; /* flag for no virtual arrays */ + } +} diff --git a/src/3rdparty/libjpeg/jdcolor.c b/src/3rdparty/libjpeg/jdcolor.c new file mode 100644 index 0000000..6c04dfe --- /dev/null +++ b/src/3rdparty/libjpeg/jdcolor.c @@ -0,0 +1,396 @@ +/* + * jdcolor.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains output colorspace conversion routines. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private subobject */ + +typedef struct { + struct jpeg_color_deconverter pub; /* public fields */ + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ +} my_color_deconverter; + +typedef my_color_deconverter * my_cconvert_ptr; + + +/**************** YCbCr -> RGB conversion: most common case **************/ + +/* + * YCbCr is defined per CCIR 601-1, except that Cb and Cr are + * normalized to the range 0..MAXJSAMPLE rather than -0.5 .. 0.5. + * The conversion equations to be implemented are therefore + * R = Y + 1.40200 * Cr + * G = Y - 0.34414 * Cb - 0.71414 * Cr + * B = Y + 1.77200 * Cb + * where Cb and Cr represent the incoming values less CENTERJSAMPLE. + * (These numbers are derived from TIFF 6.0 section 21, dated 3-June-92.) + * + * To avoid floating-point arithmetic, we represent the fractional constants + * as integers scaled up by 2^16 (about 4 digits precision); we have to divide + * the products by 2^16, with appropriate rounding, to get the correct answer. + * Notice that Y, being an integral input, does not contribute any fraction + * so it need not participate in the rounding. + * + * For even more speed, we avoid doing any multiplications in the inner loop + * by precalculating the constants times Cb and Cr for all possible values. + * For 8-bit JSAMPLEs this is very reasonable (only 256 entries per table); + * for 12-bit samples it is still acceptable. It's not very reasonable for + * 16-bit samples, but if you want lossless storage you shouldn't be changing + * colorspace anyway. + * The Cr=>R and Cb=>B values can be rounded to integers in advance; the + * values for the G calculation are left scaled up, since we must add them + * together before rounding. + */ + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + int i; + INT32 x; + SHIFT_TEMPS + + cconvert->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + cconvert->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + cconvert->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + cconvert->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + cconvert->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + cconvert->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + cconvert->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Convert some rows of samples to the output colorspace. + * + * Note that we change from noninterleaved, one-plane-per-component format + * to interleaved-pixel format. The output buffer is therefore three times + * as wide as the input buffer. + * A starting row offset is provided only for the input buffer. The caller + * can easily adjust the passed output_buf value to accommodate any row + * offset required on that side. + */ + +METHODDEF(void) +ycc_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[RGB_RED] = range_limit[y + Crrtab[cr]]; + outptr[RGB_GREEN] = range_limit[y + + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS))]; + outptr[RGB_BLUE] = range_limit[y + Cbbtab[cb]]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/**************** Cases other than YCbCr -> RGB **************/ + + +/* + * Color conversion for no colorspace change: just copy the data, + * converting from separate-planes to interleaved representation. + */ + +METHODDEF(void) +null_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW inptr, outptr; + register JDIMENSION count; + register int num_components = cinfo->num_components; + JDIMENSION num_cols = cinfo->output_width; + int ci; + + while (--num_rows >= 0) { + for (ci = 0; ci < num_components; ci++) { + inptr = input_buf[ci][input_row]; + outptr = output_buf[0] + ci; + for (count = num_cols; count > 0; count--) { + *outptr = *inptr++; /* needn't bother with GETJSAMPLE() here */ + outptr += num_components; + } + } + input_row++; + output_buf++; + } +} + + +/* + * Color conversion for grayscale: just copy the data. + * This also works for YCbCr -> grayscale conversion, in which + * we just copy the Y (luminance) component and ignore chrominance. + */ + +METHODDEF(void) +grayscale_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + jcopy_sample_rows(input_buf[0], (int) input_row, output_buf, 0, + num_rows, cinfo->output_width); +} + + +/* + * Convert grayscale to RGB: just duplicate the graylevel three times. + * This is provided to support applications that don't want to cope + * with grayscale as a separate case. + */ + +METHODDEF(void) +gray_rgb_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + register JSAMPROW inptr, outptr; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + + while (--num_rows >= 0) { + inptr = input_buf[0][input_row++]; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + /* We can dispense with GETJSAMPLE() here */ + outptr[RGB_RED] = outptr[RGB_GREEN] = outptr[RGB_BLUE] = inptr[col]; + outptr += RGB_PIXELSIZE; + } + } +} + + +/* + * Adobe-style YCCK->CMYK conversion. + * We convert YCbCr to R=1-C, G=1-M, and B=1-Y using the same + * conversion as above, while passing K (black) unchanged. + * We assume build_ycc_rgb_table has been called. + */ + +METHODDEF(void) +ycck_cmyk_convert (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows) +{ + my_cconvert_ptr cconvert = (my_cconvert_ptr) cinfo->cconvert; + register int y, cb, cr; + register JSAMPROW outptr; + register JSAMPROW inptr0, inptr1, inptr2, inptr3; + register JDIMENSION col; + JDIMENSION num_cols = cinfo->output_width; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + register int * Crrtab = cconvert->Cr_r_tab; + register int * Cbbtab = cconvert->Cb_b_tab; + register INT32 * Crgtab = cconvert->Cr_g_tab; + register INT32 * Cbgtab = cconvert->Cb_g_tab; + SHIFT_TEMPS + + while (--num_rows >= 0) { + inptr0 = input_buf[0][input_row]; + inptr1 = input_buf[1][input_row]; + inptr2 = input_buf[2][input_row]; + inptr3 = input_buf[3][input_row]; + input_row++; + outptr = *output_buf++; + for (col = 0; col < num_cols; col++) { + y = GETJSAMPLE(inptr0[col]); + cb = GETJSAMPLE(inptr1[col]); + cr = GETJSAMPLE(inptr2[col]); + /* Range-limiting is essential due to noise introduced by DCT losses. */ + outptr[0] = range_limit[MAXJSAMPLE - (y + Crrtab[cr])]; /* red */ + outptr[1] = range_limit[MAXJSAMPLE - (y + /* green */ + ((int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], + SCALEBITS)))]; + outptr[2] = range_limit[MAXJSAMPLE - (y + Cbbtab[cb])]; /* blue */ + /* K passes through unchanged */ + outptr[3] = inptr3[col]; /* don't need GETJSAMPLE here */ + outptr += 4; + } + } +} + + +/* + * Empty method for start_pass. + */ + +METHODDEF(void) +start_pass_dcolor (j_decompress_ptr cinfo) +{ + /* no work needed */ +} + + +/* + * Module initialization routine for output colorspace conversion. + */ + +GLOBAL(void) +jinit_color_deconverter (j_decompress_ptr cinfo) +{ + my_cconvert_ptr cconvert; + int ci; + + cconvert = (my_cconvert_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_color_deconverter)); + cinfo->cconvert = (struct jpeg_color_deconverter *) cconvert; + cconvert->pub.start_pass = start_pass_dcolor; + + /* Make sure num_components agrees with jpeg_color_space */ + switch (cinfo->jpeg_color_space) { + case JCS_GRAYSCALE: + if (cinfo->num_components != 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_RGB: + case JCS_YCbCr: + if (cinfo->num_components != 3) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + case JCS_CMYK: + case JCS_YCCK: + if (cinfo->num_components != 4) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + + default: /* JCS_UNKNOWN can be anything */ + if (cinfo->num_components < 1) + ERREXIT(cinfo, JERR_BAD_J_COLORSPACE); + break; + } + + /* Set out_color_components and conversion method based on requested space. + * Also clear the component_needed flags for any unused components, + * so that earlier pipeline stages can avoid useless computation. + */ + + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + if (cinfo->jpeg_color_space == JCS_GRAYSCALE || + cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = grayscale_convert; + /* For color->grayscale conversion, only the Y (0) component is needed */ + for (ci = 1; ci < cinfo->num_components; ci++) + cinfo->comp_info[ci].component_needed = FALSE; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_RGB: + cinfo->out_color_components = RGB_PIXELSIZE; + if (cinfo->jpeg_color_space == JCS_YCbCr) { + cconvert->pub.color_convert = ycc_rgb_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_GRAYSCALE) { + cconvert->pub.color_convert = gray_rgb_convert; + } else if (cinfo->jpeg_color_space == JCS_RGB && RGB_PIXELSIZE == 3) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + case JCS_CMYK: + cinfo->out_color_components = 4; + if (cinfo->jpeg_color_space == JCS_YCCK) { + cconvert->pub.color_convert = ycck_cmyk_convert; + build_ycc_rgb_table(cinfo); + } else if (cinfo->jpeg_color_space == JCS_CMYK) { + cconvert->pub.color_convert = null_convert; + } else + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + + default: + /* Permit null conversion to same output space */ + if (cinfo->out_color_space == cinfo->jpeg_color_space) { + cinfo->out_color_components = cinfo->num_components; + cconvert->pub.color_convert = null_convert; + } else /* unsupported non-null conversion */ + ERREXIT(cinfo, JERR_CONVERSION_NOTIMPL); + break; + } + + if (cinfo->quantize_colors) + cinfo->output_components = 1; /* single colormapped output component */ + else + cinfo->output_components = cinfo->out_color_components; +} diff --git a/src/3rdparty/libjpeg/jdct.h b/src/3rdparty/libjpeg/jdct.h new file mode 100644 index 0000000..360dec8 --- /dev/null +++ b/src/3rdparty/libjpeg/jdct.h @@ -0,0 +1,393 @@ +/* + * jdct.h + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file contains common declarations for the forward and + * inverse DCT modules. These declarations are private to the DCT managers + * (jcdctmgr.c, jddctmgr.c) and the individual DCT algorithms. + * The individual DCT algorithms are kept in separate files to ease + * machine-dependent tuning (e.g., assembly coding). + */ + + +/* + * A forward DCT routine is given a pointer to an input sample array and + * a pointer to a work area of type DCTELEM[]; the DCT is to be performed + * in-place in that buffer. Type DCTELEM is int for 8-bit samples, INT32 + * for 12-bit samples. (NOTE: Floating-point DCT implementations use an + * array of type FAST_FLOAT, instead.) + * The input data is to be fetched from the sample array starting at a + * specified column. (Any row offset needed will be applied to the array + * pointer before it is passed to the FDCT code.) + * Note that the number of samples fetched by the FDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + * The DCT outputs are returned scaled up by a factor of 8; they therefore + * have a range of +-8K for 8-bit data, +-128K for 12-bit data. This + * convention improves accuracy in integer implementations and saves some + * work in floating-point ones. + * Quantization of the output coefficients is done by jcdctmgr.c. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef int DCTELEM; /* 16 or 32 bits is fine */ +#else +typedef INT32 DCTELEM; /* must have 32 bits */ +#endif + +typedef JMETHOD(void, forward_DCT_method_ptr, (DCTELEM * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); +typedef JMETHOD(void, float_DCT_method_ptr, (FAST_FLOAT * data, + JSAMPARRAY sample_data, + JDIMENSION start_col)); + + +/* + * An inverse DCT routine is given a pointer to the input JBLOCK and a pointer + * to an output sample array. The routine must dequantize the input data as + * well as perform the IDCT; for dequantization, it uses the multiplier table + * pointed to by compptr->dct_table. The output data is to be placed into the + * sample array starting at a specified column. (Any row offset needed will + * be applied to the array pointer before it is passed to the IDCT code.) + * Note that the number of samples emitted by the IDCT routine is + * DCT_h_scaled_size * DCT_v_scaled_size. + */ + +/* typedef inverse_DCT_method_ptr is declared in jpegint.h */ + +/* + * Each IDCT routine has its own ideas about the best dct_table element type. + */ + +typedef MULTIPLIER ISLOW_MULT_TYPE; /* short or int, whichever is faster */ +#if BITS_IN_JSAMPLE == 8 +typedef MULTIPLIER IFAST_MULT_TYPE; /* 16 bits is OK, use short if faster */ +#define IFAST_SCALE_BITS 2 /* fractional bits in scale factors */ +#else +typedef INT32 IFAST_MULT_TYPE; /* need 32 bits for scaled quantizers */ +#define IFAST_SCALE_BITS 13 /* fractional bits in scale factors */ +#endif +typedef FAST_FLOAT FLOAT_MULT_TYPE; /* preferred floating type */ + + +/* + * Each IDCT routine is responsible for range-limiting its results and + * converting them to unsigned form (0..MAXJSAMPLE). The raw outputs could + * be quite far out of range if the input data is corrupt, so a bulletproof + * range-limiting step is required. We use a mask-and-table-lookup method + * to do the combined operations quickly. See the comments with + * prepare_range_limit_table (in jdmaster.c) for more info. + */ + +#define IDCT_range_limit(cinfo) ((cinfo)->sample_range_limit + CENTERJSAMPLE) + +#define RANGE_MASK (MAXJSAMPLE * 4 + 3) /* 2 bits wider than legal samples */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_fdct_islow jFDislow +#define jpeg_fdct_ifast jFDifast +#define jpeg_fdct_float jFDfloat +#define jpeg_fdct_7x7 jFD7x7 +#define jpeg_fdct_6x6 jFD6x6 +#define jpeg_fdct_5x5 jFD5x5 +#define jpeg_fdct_4x4 jFD4x4 +#define jpeg_fdct_3x3 jFD3x3 +#define jpeg_fdct_2x2 jFD2x2 +#define jpeg_fdct_1x1 jFD1x1 +#define jpeg_fdct_9x9 jFD9x9 +#define jpeg_fdct_10x10 jFD10x10 +#define jpeg_fdct_11x11 jFD11x11 +#define jpeg_fdct_12x12 jFD12x12 +#define jpeg_fdct_13x13 jFD13x13 +#define jpeg_fdct_14x14 jFD14x14 +#define jpeg_fdct_15x15 jFD15x15 +#define jpeg_fdct_16x16 jFD16x16 +#define jpeg_fdct_16x8 jFD16x8 +#define jpeg_fdct_14x7 jFD14x7 +#define jpeg_fdct_12x6 jFD12x6 +#define jpeg_fdct_10x5 jFD10x5 +#define jpeg_fdct_8x4 jFD8x4 +#define jpeg_fdct_6x3 jFD6x3 +#define jpeg_fdct_4x2 jFD4x2 +#define jpeg_fdct_2x1 jFD2x1 +#define jpeg_fdct_8x16 jFD8x16 +#define jpeg_fdct_7x14 jFD7x14 +#define jpeg_fdct_6x12 jFD6x12 +#define jpeg_fdct_5x10 jFD5x10 +#define jpeg_fdct_4x8 jFD4x8 +#define jpeg_fdct_3x6 jFD3x6 +#define jpeg_fdct_2x4 jFD2x4 +#define jpeg_fdct_1x2 jFD1x2 +#define jpeg_idct_islow jRDislow +#define jpeg_idct_ifast jRDifast +#define jpeg_idct_float jRDfloat +#define jpeg_idct_7x7 jRD7x7 +#define jpeg_idct_6x6 jRD6x6 +#define jpeg_idct_5x5 jRD5x5 +#define jpeg_idct_4x4 jRD4x4 +#define jpeg_idct_3x3 jRD3x3 +#define jpeg_idct_2x2 jRD2x2 +#define jpeg_idct_1x1 jRD1x1 +#define jpeg_idct_9x9 jRD9x9 +#define jpeg_idct_10x10 jRD10x10 +#define jpeg_idct_11x11 jRD11x11 +#define jpeg_idct_12x12 jRD12x12 +#define jpeg_idct_13x13 jRD13x13 +#define jpeg_idct_14x14 jRD14x14 +#define jpeg_idct_15x15 jRD15x15 +#define jpeg_idct_16x16 jRD16x16 +#define jpeg_idct_16x8 jRD16x8 +#define jpeg_idct_14x7 jRD14x7 +#define jpeg_idct_12x6 jRD12x6 +#define jpeg_idct_10x5 jRD10x5 +#define jpeg_idct_8x4 jRD8x4 +#define jpeg_idct_6x3 jRD6x3 +#define jpeg_idct_4x2 jRD4x2 +#define jpeg_idct_2x1 jRD2x1 +#define jpeg_idct_8x16 jRD8x16 +#define jpeg_idct_7x14 jRD7x14 +#define jpeg_idct_6x12 jRD6x12 +#define jpeg_idct_5x10 jRD5x10 +#define jpeg_idct_4x8 jRD4x8 +#define jpeg_idct_3x6 jRD3x8 +#define jpeg_idct_2x4 jRD2x4 +#define jpeg_idct_1x2 jRD1x2 +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + +/* Extern declarations for the forward and inverse DCT routines. */ + +EXTERN(void) jpeg_fdct_islow + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_ifast + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_float + JPP((FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_9x9 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_11x11 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_13x13 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_15x15 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_16x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_14x7 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_12x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_10x5 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x3 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x1 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_8x16 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_7x14 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_6x12 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_5x10 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_4x8 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_3x6 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_2x4 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); +EXTERN(void) jpeg_fdct_1x2 + JPP((DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col)); + +EXTERN(void) jpeg_idct_islow + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_ifast + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_float + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_9x9 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_11x11 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_13x13 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_15x15 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_16x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_14x7 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_12x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_10x5 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x3 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x1 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_8x16 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_7x14 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_6x12 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_5x10 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_4x8 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_3x6 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_2x4 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); +EXTERN(void) jpeg_idct_1x2 + JPP((j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, JSAMPARRAY output_buf, JDIMENSION output_col)); + + +/* + * Macros for handling fixed-point arithmetic; these are used by many + * but not all of the DCT/IDCT modules. + * + * All values are expected to be of type INT32. + * Fractional constants are scaled left by CONST_BITS bits. + * CONST_BITS is defined within each module using these macros, + * and may differ from one module to the next. + */ + +#define ONE ((INT32) 1) +#define CONST_SCALE (ONE << CONST_BITS) + +/* Convert a positive real constant to an integer scaled by CONST_SCALE. + * Caution: some C compilers fail to reduce "FIX(constant)" at compile time, + * thus causing a lot of useless floating-point operations at run time. + */ + +#define FIX(x) ((INT32) ((x) * CONST_SCALE + 0.5)) + +/* Descale and correctly round an INT32 value that's scaled by N bits. + * We assume RIGHT_SHIFT rounds towards minus infinity, so adding + * the fudge factor is correct for either sign of X. + */ + +#define DESCALE(x,n) RIGHT_SHIFT((x) + (ONE << ((n)-1)), n) + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * This macro is used only when the two inputs will actually be no more than + * 16 bits wide, so that a 16x16->32 bit multiply can be used instead of a + * full 32x32 multiply. This provides a useful speedup on many machines. + * Unfortunately there is no way to specify a 16x16->32 multiply portably + * in C, but some C compilers will do the right thing if you provide the + * correct combination of casts. + */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT16) (const))) +#endif +#ifdef SHORTxLCONST_32 /* known to work with Microsoft C 6.0 */ +#define MULTIPLY16C16(var,const) (((INT16) (var)) * ((INT32) (const))) +#endif + +#ifndef MULTIPLY16C16 /* default definition */ +#define MULTIPLY16C16(var,const) ((var) * (const)) +#endif + +/* Same except both inputs are variables. */ + +#ifdef SHORTxSHORT_32 /* may work if 'int' is 32 bits */ +#define MULTIPLY16V16(var1,var2) (((INT16) (var1)) * ((INT16) (var2))) +#endif + +#ifndef MULTIPLY16V16 /* default definition */ +#define MULTIPLY16V16(var1,var2) ((var1) * (var2)) +#endif diff --git a/src/3rdparty/libjpeg/jddctmgr.c b/src/3rdparty/libjpeg/jddctmgr.c new file mode 100644 index 0000000..bdbde34 --- /dev/null +++ b/src/3rdparty/libjpeg/jddctmgr.c @@ -0,0 +1,382 @@ +/* + * jddctmgr.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the inverse-DCT management logic. + * This code selects a particular IDCT implementation to be used, + * and it performs related housekeeping chores. No code in this file + * is executed per IDCT step, only during output pass setup. + * + * Note that the IDCT routines are responsible for performing coefficient + * dequantization as well as the IDCT proper. This module sets up the + * dequantization multiplier table needed by the IDCT routine. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + + +/* + * The decompressor input side (jdinput.c) saves away the appropriate + * quantization table for each component at the start of the first scan + * involving that component. (This is necessary in order to correctly + * decode files that reuse Q-table slots.) + * When we are ready to make an output pass, the saved Q-table is converted + * to a multiplier table that will actually be used by the IDCT routine. + * The multiplier table contents are IDCT-method-dependent. To support + * application changes in IDCT method between scans, we can remake the + * multiplier tables if necessary. + * In buffered-image mode, the first output pass may occur before any data + * has been seen for some components, and thus before their Q-tables have + * been saved away. To handle this case, multiplier tables are preset + * to zeroes; the result of the IDCT will be a neutral gray level. + */ + + +/* Private subobject for this module */ + +typedef struct { + struct jpeg_inverse_dct pub; /* public fields */ + + /* This array contains the IDCT method code that each multiplier table + * is currently set up for, or -1 if it's not yet set up. + * The actual multiplier tables are pointed to by dct_table in the + * per-component comp_info structures. + */ + int cur_method[MAX_COMPONENTS]; +} my_idct_controller; + +typedef my_idct_controller * my_idct_ptr; + + +/* Allocated multiplier tables: big enough for any supported variant */ + +typedef union { + ISLOW_MULT_TYPE islow_array[DCTSIZE2]; +#ifdef DCT_IFAST_SUPPORTED + IFAST_MULT_TYPE ifast_array[DCTSIZE2]; +#endif +#ifdef DCT_FLOAT_SUPPORTED + FLOAT_MULT_TYPE float_array[DCTSIZE2]; +#endif +} multiplier_table; + + +/* The current scaled-IDCT routines require ISLOW-style multiplier tables, + * so be sure to compile that code if either ISLOW or SCALING is requested. + */ +#ifdef DCT_ISLOW_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#else +#ifdef IDCT_SCALING_SUPPORTED +#define PROVIDE_ISLOW_TABLES +#endif +#endif + + +/* + * Prepare for an output pass. + * Here we select the proper IDCT routine for each component and build + * a matching multiplier table. + */ + +METHODDEF(void) +start_pass (j_decompress_ptr cinfo) +{ + my_idct_ptr idct = (my_idct_ptr) cinfo->idct; + int ci, i; + jpeg_component_info *compptr; + int method = 0; + inverse_DCT_method_ptr method_ptr = NULL; + JQUANT_TBL * qtbl; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Select the proper IDCT routine for this component's scaling */ + switch ((compptr->DCT_h_scaled_size << 8) + compptr->DCT_v_scaled_size) { +#ifdef IDCT_SCALING_SUPPORTED + case ((1 << 8) + 1): + method_ptr = jpeg_idct_1x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 2): + method_ptr = jpeg_idct_2x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 3): + method_ptr = jpeg_idct_3x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 4): + method_ptr = jpeg_idct_4x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 5): + method_ptr = jpeg_idct_5x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 6): + method_ptr = jpeg_idct_6x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 7): + method_ptr = jpeg_idct_7x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((9 << 8) + 9): + method_ptr = jpeg_idct_9x9; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 10): + method_ptr = jpeg_idct_10x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((11 << 8) + 11): + method_ptr = jpeg_idct_11x11; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 12): + method_ptr = jpeg_idct_12x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((13 << 8) + 13): + method_ptr = jpeg_idct_13x13; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 14): + method_ptr = jpeg_idct_14x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((15 << 8) + 15): + method_ptr = jpeg_idct_15x15; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 16): + method_ptr = jpeg_idct_16x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((16 << 8) + 8): + method_ptr = jpeg_idct_16x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((14 << 8) + 7): + method_ptr = jpeg_idct_14x7; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((12 << 8) + 6): + method_ptr = jpeg_idct_12x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((10 << 8) + 5): + method_ptr = jpeg_idct_10x5; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 4): + method_ptr = jpeg_idct_8x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 3): + method_ptr = jpeg_idct_6x3; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 2): + method_ptr = jpeg_idct_4x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 1): + method_ptr = jpeg_idct_2x1; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((8 << 8) + 16): + method_ptr = jpeg_idct_8x16; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((7 << 8) + 14): + method_ptr = jpeg_idct_7x14; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((6 << 8) + 12): + method_ptr = jpeg_idct_6x12; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((5 << 8) + 10): + method_ptr = jpeg_idct_5x10; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((4 << 8) + 8): + method_ptr = jpeg_idct_4x8; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((3 << 8) + 6): + method_ptr = jpeg_idct_3x6; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((2 << 8) + 4): + method_ptr = jpeg_idct_2x4; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; + case ((1 << 8) + 2): + method_ptr = jpeg_idct_1x2; + method = JDCT_ISLOW; /* jidctint uses islow-style table */ + break; +#endif + case ((DCTSIZE << 8) + DCTSIZE): + switch (cinfo->dct_method) { +#ifdef DCT_ISLOW_SUPPORTED + case JDCT_ISLOW: + method_ptr = jpeg_idct_islow; + method = JDCT_ISLOW; + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + method_ptr = jpeg_idct_ifast; + method = JDCT_IFAST; + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + method_ptr = jpeg_idct_float; + method = JDCT_FLOAT; + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + break; + default: + ERREXIT2(cinfo, JERR_BAD_DCTSIZE, + compptr->DCT_h_scaled_size, compptr->DCT_v_scaled_size); + break; + } + idct->pub.inverse_DCT[ci] = method_ptr; + /* Create multiplier table from quant table. + * However, we can skip this if the component is uninteresting + * or if we already built the table. Also, if no quant table + * has yet been saved for the component, we leave the + * multiplier table all-zero; we'll be reading zeroes from the + * coefficient controller's buffer anyway. + */ + if (! compptr->component_needed || idct->cur_method[ci] == method) + continue; + qtbl = compptr->quant_table; + if (qtbl == NULL) /* happens if no data yet for component */ + continue; + idct->cur_method[ci] = method; + switch (method) { +#ifdef PROVIDE_ISLOW_TABLES + case JDCT_ISLOW: + { + /* For LL&M IDCT method, multipliers are equal to raw quantization + * coefficients, but are stored as ints to ensure access efficiency. + */ + ISLOW_MULT_TYPE * ismtbl = (ISLOW_MULT_TYPE *) compptr->dct_table; + for (i = 0; i < DCTSIZE2; i++) { + ismtbl[i] = (ISLOW_MULT_TYPE) qtbl->quantval[i]; + } + } + break; +#endif +#ifdef DCT_IFAST_SUPPORTED + case JDCT_IFAST: + { + /* For AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + * For integer operation, the multiplier table is to be scaled by + * IFAST_SCALE_BITS. + */ + IFAST_MULT_TYPE * ifmtbl = (IFAST_MULT_TYPE *) compptr->dct_table; +#define CONST_BITS 14 + static const INT16 aanscales[DCTSIZE2] = { + /* precomputed values scaled up by 14 bits */ + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 22725, 31521, 29692, 26722, 22725, 17855, 12299, 6270, + 21407, 29692, 27969, 25172, 21407, 16819, 11585, 5906, + 19266, 26722, 25172, 22654, 19266, 15137, 10426, 5315, + 16384, 22725, 21407, 19266, 16384, 12873, 8867, 4520, + 12873, 17855, 16819, 15137, 12873, 10114, 6967, 3552, + 8867, 12299, 11585, 10426, 8867, 6967, 4799, 2446, + 4520, 6270, 5906, 5315, 4520, 3552, 2446, 1247 + }; + SHIFT_TEMPS + + for (i = 0; i < DCTSIZE2; i++) { + ifmtbl[i] = (IFAST_MULT_TYPE) + DESCALE(MULTIPLY16V16((INT32) qtbl->quantval[i], + (INT32) aanscales[i]), + CONST_BITS-IFAST_SCALE_BITS); + } + } + break; +#endif +#ifdef DCT_FLOAT_SUPPORTED + case JDCT_FLOAT: + { + /* For float AA&N IDCT method, multipliers are equal to quantization + * coefficients scaled by scalefactor[row]*scalefactor[col], where + * scalefactor[0] = 1 + * scalefactor[k] = cos(k*PI/16) * sqrt(2) for k=1..7 + */ + FLOAT_MULT_TYPE * fmtbl = (FLOAT_MULT_TYPE *) compptr->dct_table; + int row, col; + static const double aanscalefactor[DCTSIZE] = { + 1.0, 1.387039845, 1.306562965, 1.175875602, + 1.0, 0.785694958, 0.541196100, 0.275899379 + }; + + i = 0; + for (row = 0; row < DCTSIZE; row++) { + for (col = 0; col < DCTSIZE; col++) { + fmtbl[i] = (FLOAT_MULT_TYPE) + ((double) qtbl->quantval[i] * + aanscalefactor[row] * aanscalefactor[col]); + i++; + } + } + } + break; +#endif + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } + } +} + + +/* + * Initialize IDCT manager. + */ + +GLOBAL(void) +jinit_inverse_dct (j_decompress_ptr cinfo) +{ + my_idct_ptr idct; + int ci; + jpeg_component_info *compptr; + + idct = (my_idct_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_idct_controller)); + cinfo->idct = (struct jpeg_inverse_dct *) idct; + idct->pub.start_pass = start_pass; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Allocate and pre-zero a multiplier table for each component */ + compptr->dct_table = + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(multiplier_table)); + MEMZERO(compptr->dct_table, SIZEOF(multiplier_table)); + /* Mark multiplier table not yet set up for any method */ + idct->cur_method[ci] = -1; + } +} diff --git a/src/3rdparty/libjpeg/jdhuff.c b/src/3rdparty/libjpeg/jdhuff.c new file mode 100644 index 0000000..06f92fe --- /dev/null +++ b/src/3rdparty/libjpeg/jdhuff.c @@ -0,0 +1,1541 @@ +/* + * jdhuff.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2006-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains Huffman entropy decoding routines. + * Both sequential and progressive modes are supported in this single module. + * + * Much of the complexity here has to do with supporting input suspension. + * If the data source module demands suspension, we want to be able to back + * up to the start of the current MCU. To do this, we copy state variables + * into local working storage, and update them back to the permanent + * storage only upon successful completion of an MCU. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Derived data constructed for each Huffman table */ + +#define HUFF_LOOKAHEAD 8 /* # of bits of lookahead */ + +typedef struct { + /* Basic tables: (element [0] of each array is unused) */ + INT32 maxcode[18]; /* largest code of length k (-1 if none) */ + /* (maxcode[17] is a sentinel to ensure jpeg_huff_decode terminates) */ + INT32 valoffset[17]; /* huffval[] offset for codes of length k */ + /* valoffset[k] = huffval[] index of 1st symbol of code length k, less + * the smallest code of length k; so given a code of length k, the + * corresponding symbol is huffval[code + valoffset[k]] + */ + + /* Link to public Huffman table (needed only in jpeg_huff_decode) */ + JHUFF_TBL *pub; + + /* Lookahead tables: indexed by the next HUFF_LOOKAHEAD bits of + * the input data stream. If the next Huffman code is no more + * than HUFF_LOOKAHEAD bits long, we can obtain its length and + * the corresponding symbol directly from these tables. + */ + int look_nbits[1< 32 bits on your machine, and shifting/masking longs is + * reasonably fast, making bit_buf_type be long and setting BIT_BUF_SIZE + * appropriately should be a win. Unfortunately we can't define the size + * with something like #define BIT_BUF_SIZE (sizeof(bit_buf_type)*8) + * because not all machines measure sizeof in 8-bit bytes. + */ + +typedef struct { /* Bitreading state saved across MCUs */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ +} bitread_perm_state; + +typedef struct { /* Bitreading working state within an MCU */ + /* Current data source location */ + /* We need a copy, rather than munging the original, in case of suspension */ + const JOCTET * next_input_byte; /* => next byte to read from source */ + size_t bytes_in_buffer; /* # of bytes remaining in source buffer */ + /* Bit input buffer --- note these values are kept in register variables, + * not in this struct, inside the inner loops. + */ + bit_buf_type get_buffer; /* current bit-extraction buffer */ + int bits_left; /* # of unused bits in it */ + /* Pointer needed by jpeg_fill_bit_buffer. */ + j_decompress_ptr cinfo; /* back link to decompress master record */ +} bitread_working_state; + +/* Macros to declare and load/save bitread local variables. */ +#define BITREAD_STATE_VARS \ + register bit_buf_type get_buffer; \ + register int bits_left; \ + bitread_working_state br_state + +#define BITREAD_LOAD_STATE(cinfop,permstate) \ + br_state.cinfo = cinfop; \ + br_state.next_input_byte = cinfop->src->next_input_byte; \ + br_state.bytes_in_buffer = cinfop->src->bytes_in_buffer; \ + get_buffer = permstate.get_buffer; \ + bits_left = permstate.bits_left; + +#define BITREAD_SAVE_STATE(cinfop,permstate) \ + cinfop->src->next_input_byte = br_state.next_input_byte; \ + cinfop->src->bytes_in_buffer = br_state.bytes_in_buffer; \ + permstate.get_buffer = get_buffer; \ + permstate.bits_left = bits_left + +/* + * These macros provide the in-line portion of bit fetching. + * Use CHECK_BIT_BUFFER to ensure there are N bits in get_buffer + * before using GET_BITS, PEEK_BITS, or DROP_BITS. + * The variables get_buffer and bits_left are assumed to be locals, + * but the state struct might not be (jpeg_huff_decode needs this). + * CHECK_BIT_BUFFER(state,n,action); + * Ensure there are N bits in get_buffer; if suspend, take action. + * val = GET_BITS(n); + * Fetch next N bits. + * val = PEEK_BITS(n); + * Fetch next N bits without removing them from the buffer. + * DROP_BITS(n); + * Discard next N bits. + * The value N should be a simple variable, not an expression, because it + * is evaluated multiple times. + */ + +#define CHECK_BIT_BUFFER(state,nbits,action) \ + { if (bits_left < (nbits)) { \ + if (! jpeg_fill_bit_buffer(&(state),get_buffer,bits_left,nbits)) \ + { action; } \ + get_buffer = (state).get_buffer; bits_left = (state).bits_left; } } + +#define GET_BITS(nbits) \ + (((int) (get_buffer >> (bits_left -= (nbits)))) & BIT_MASK(nbits)) + +#define PEEK_BITS(nbits) \ + (((int) (get_buffer >> (bits_left - (nbits)))) & BIT_MASK(nbits)) + +#define DROP_BITS(nbits) \ + (bits_left -= (nbits)) + + +/* + * Code for extracting next Huffman-coded symbol from input bit stream. + * Again, this is time-critical and we make the main paths be macros. + * + * We use a lookahead table to process codes of up to HUFF_LOOKAHEAD bits + * without looping. Usually, more than 95% of the Huffman codes will be 8 + * or fewer bits long. The few overlength codes are handled with a loop, + * which need not be inline code. + * + * Notes about the HUFF_DECODE macro: + * 1. Near the end of the data segment, we may fail to get enough bits + * for a lookahead. In that case, we do it the hard way. + * 2. If the lookahead table contains no entry, the next code must be + * more than HUFF_LOOKAHEAD bits long. + * 3. jpeg_huff_decode returns -1 if forced to suspend. + */ + +#define HUFF_DECODE(result,state,htbl,failaction,slowlabel) \ +{ register int nb, look; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + if (! jpeg_fill_bit_buffer(&state,get_buffer,bits_left, 0)) {failaction;} \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + if (bits_left < HUFF_LOOKAHEAD) { \ + nb = 1; goto slowlabel; \ + } \ + } \ + look = PEEK_BITS(HUFF_LOOKAHEAD); \ + if ((nb = htbl->look_nbits[look]) != 0) { \ + DROP_BITS(nb); \ + result = htbl->look_sym[look]; \ + } else { \ + nb = HUFF_LOOKAHEAD+1; \ +slowlabel: \ + if ((result=jpeg_huff_decode(&state,get_buffer,bits_left,htbl,nb)) < 0) \ + { failaction; } \ + get_buffer = state.get_buffer; bits_left = state.bits_left; \ + } \ +} + + +/* + * Expanded entropy decoder object for Huffman decoding. + * + * The savable_state subrecord contains fields that change within an MCU, + * but must not be updated permanently until we complete the MCU. + */ + +typedef struct { + unsigned int EOBRUN; /* remaining EOBs in EOBRUN */ + int last_dc_val[MAX_COMPS_IN_SCAN]; /* last DC coef for each component */ +} savable_state; + +/* This macro is to work around compilers with missing or broken + * structure assignment. You'll need to fix this code if you have + * such a compiler and you change MAX_COMPS_IN_SCAN. + */ + +#ifndef NO_STRUCT_ASSIGN +#define ASSIGN_STATE(dest,src) ((dest) = (src)) +#else +#if MAX_COMPS_IN_SCAN == 4 +#define ASSIGN_STATE(dest,src) \ + ((dest).EOBRUN = (src).EOBRUN, \ + (dest).last_dc_val[0] = (src).last_dc_val[0], \ + (dest).last_dc_val[1] = (src).last_dc_val[1], \ + (dest).last_dc_val[2] = (src).last_dc_val[2], \ + (dest).last_dc_val[3] = (src).last_dc_val[3]) +#endif +#endif + + +typedef struct { + struct jpeg_entropy_decoder pub; /* public fields */ + + /* These fields are loaded into local variables at start of each MCU. + * In case of suspension, we exit WITHOUT updating them. + */ + bitread_perm_state bitstate; /* Bit buffer at start of MCU */ + savable_state saved; /* Other state at start of MCU */ + + /* These fields are NOT loaded into local working state. */ + boolean insufficient_data; /* set TRUE after emitting warning */ + unsigned int restarts_to_go; /* MCUs left in this restart interval */ + + /* Following two fields used only in progressive mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * derived_tbls[NUM_HUFF_TBLS]; + + d_derived_tbl * ac_derived_tbl; /* active table during an AC scan */ + + /* Following fields used only in sequential mode */ + + /* Pointers to derived tables (these workspaces have image lifespan) */ + d_derived_tbl * dc_derived_tbls[NUM_HUFF_TBLS]; + d_derived_tbl * ac_derived_tbls[NUM_HUFF_TBLS]; + + /* Precalculated info set up by start_pass for use in decode_mcu: */ + + /* Pointers to derived tables to be used for each block within an MCU */ + d_derived_tbl * dc_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + d_derived_tbl * ac_cur_tbls[D_MAX_BLOCKS_IN_MCU]; + /* Whether we care about the DC and AC coefficient values for each block */ + int coef_limit[D_MAX_BLOCKS_IN_MCU]; +} huff_entropy_decoder; + +typedef huff_entropy_decoder * huff_entropy_ptr; + + +static const int jpeg_zigzag_order[8][8] = { + { 0, 1, 5, 6, 14, 15, 27, 28 }, + { 2, 4, 7, 13, 16, 26, 29, 42 }, + { 3, 8, 12, 17, 25, 30, 41, 43 }, + { 9, 11, 18, 24, 31, 40, 44, 53 }, + { 10, 19, 23, 32, 39, 45, 52, 54 }, + { 20, 22, 33, 38, 46, 51, 55, 60 }, + { 21, 34, 37, 47, 50, 56, 59, 61 }, + { 35, 36, 48, 49, 57, 58, 62, 63 } +}; + +static const int jpeg_zigzag_order7[7][7] = { + { 0, 1, 5, 6, 14, 15, 27 }, + { 2, 4, 7, 13, 16, 26, 28 }, + { 3, 8, 12, 17, 25, 29, 38 }, + { 9, 11, 18, 24, 30, 37, 39 }, + { 10, 19, 23, 31, 36, 40, 45 }, + { 20, 22, 32, 35, 41, 44, 46 }, + { 21, 33, 34, 42, 43, 47, 48 } +}; + +static const int jpeg_zigzag_order6[6][6] = { + { 0, 1, 5, 6, 14, 15 }, + { 2, 4, 7, 13, 16, 25 }, + { 3, 8, 12, 17, 24, 26 }, + { 9, 11, 18, 23, 27, 32 }, + { 10, 19, 22, 28, 31, 33 }, + { 20, 21, 29, 30, 34, 35 } +}; + +static const int jpeg_zigzag_order5[5][5] = { + { 0, 1, 5, 6, 14 }, + { 2, 4, 7, 13, 15 }, + { 3, 8, 12, 16, 21 }, + { 9, 11, 17, 20, 22 }, + { 10, 18, 19, 23, 24 } +}; + +static const int jpeg_zigzag_order4[4][4] = { + { 0, 1, 5, 6 }, + { 2, 4, 7, 12 }, + { 3, 8, 11, 13 }, + { 9, 10, 14, 15 } +}; + +static const int jpeg_zigzag_order3[3][3] = { + { 0, 1, 5 }, + { 2, 4, 6 }, + { 3, 7, 8 } +}; + +static const int jpeg_zigzag_order2[2][2] = { + { 0, 1 }, + { 2, 3 } +}; + + +/* + * Compute the derived values for a Huffman table. + * This routine also performs some validation checks on the table. + */ + +LOCAL(void) +jpeg_make_d_derived_tbl (j_decompress_ptr cinfo, boolean isDC, int tblno, + d_derived_tbl ** pdtbl) +{ + JHUFF_TBL *htbl; + d_derived_tbl *dtbl; + int p, i, l, si, numsymbols; + int lookbits, ctr; + char huffsize[257]; + unsigned int huffcode[257]; + unsigned int code; + + /* Note that huffsize[] and huffcode[] are filled in code-length order, + * paralleling the order of the symbols themselves in htbl->huffval[]. + */ + + /* Find the input Huffman table */ + if (tblno < 0 || tblno >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + htbl = + isDC ? cinfo->dc_huff_tbl_ptrs[tblno] : cinfo->ac_huff_tbl_ptrs[tblno]; + if (htbl == NULL) + ERREXIT1(cinfo, JERR_NO_HUFF_TABLE, tblno); + + /* Allocate a workspace if we haven't already done so. */ + if (*pdtbl == NULL) + *pdtbl = (d_derived_tbl *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(d_derived_tbl)); + dtbl = *pdtbl; + dtbl->pub = htbl; /* fill in back link */ + + /* Figure C.1: make table of Huffman code length for each symbol */ + + p = 0; + for (l = 1; l <= 16; l++) { + i = (int) htbl->bits[l]; + if (i < 0 || p + i > 256) /* protect against table overrun */ + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + while (i--) + huffsize[p++] = (char) l; + } + huffsize[p] = 0; + numsymbols = p; + + /* Figure C.2: generate the codes themselves */ + /* We also validate that the counts represent a legal Huffman code tree. */ + + code = 0; + si = huffsize[0]; + p = 0; + while (huffsize[p]) { + while (((int) huffsize[p]) == si) { + huffcode[p++] = code; + code++; + } + /* code is now 1 more than the last code used for codelength si; but + * it must still fit in si bits, since no code is allowed to be all ones. + */ + if (((INT32) code) >= (((INT32) 1) << si)) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + code <<= 1; + si++; + } + + /* Figure F.15: generate decoding tables for bit-sequential decoding */ + + p = 0; + for (l = 1; l <= 16; l++) { + if (htbl->bits[l]) { + /* valoffset[l] = huffval[] index of 1st symbol of code length l, + * minus the minimum code of length l + */ + dtbl->valoffset[l] = (INT32) p - (INT32) huffcode[p]; + p += htbl->bits[l]; + dtbl->maxcode[l] = huffcode[p-1]; /* maximum code of length l */ + } else { + dtbl->maxcode[l] = -1; /* -1 if no codes of this length */ + } + } + dtbl->maxcode[17] = 0xFFFFFL; /* ensures jpeg_huff_decode terminates */ + + /* Compute lookahead tables to speed up decoding. + * First we set all the table entries to 0, indicating "too long"; + * then we iterate through the Huffman codes that are short enough and + * fill in all the entries that correspond to bit sequences starting + * with that code. + */ + + MEMZERO(dtbl->look_nbits, SIZEOF(dtbl->look_nbits)); + + p = 0; + for (l = 1; l <= HUFF_LOOKAHEAD; l++) { + for (i = 1; i <= (int) htbl->bits[l]; i++, p++) { + /* l = current code's length, p = its index in huffcode[] & huffval[]. */ + /* Generate left-justified code followed by all possible bit sequences */ + lookbits = huffcode[p] << (HUFF_LOOKAHEAD-l); + for (ctr = 1 << (HUFF_LOOKAHEAD-l); ctr > 0; ctr--) { + dtbl->look_nbits[lookbits] = l; + dtbl->look_sym[lookbits] = htbl->huffval[p]; + lookbits++; + } + } + } + + /* Validate symbols as being reasonable. + * For AC tables, we make no check, but accept all byte values 0..255. + * For DC tables, we require the symbols to be in range 0..15. + * (Tighter bounds could be applied depending on the data depth and mode, + * but this is sufficient to ensure safe decoding.) + */ + if (isDC) { + for (i = 0; i < numsymbols; i++) { + int sym = htbl->huffval[i]; + if (sym < 0 || sym > 15) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + } + } +} + + +/* + * Out-of-line code for bit fetching. + * Note: current values of get_buffer and bits_left are passed as parameters, + * but are returned in the corresponding fields of the state struct. + * + * On most machines MIN_GET_BITS should be 25 to allow the full 32-bit width + * of get_buffer to be used. (On machines with wider words, an even larger + * buffer could be used.) However, on some machines 32-bit shifts are + * quite slow and take time proportional to the number of places shifted. + * (This is true with most PC compilers, for instance.) In this case it may + * be a win to set MIN_GET_BITS to the minimum value of 15. This reduces the + * average shift distance at the cost of more calls to jpeg_fill_bit_buffer. + */ + +#ifdef SLOW_SHIFT_32 +#define MIN_GET_BITS 15 /* minimum allowable value */ +#else +#define MIN_GET_BITS (BIT_BUF_SIZE-7) +#endif + + +LOCAL(boolean) +jpeg_fill_bit_buffer (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + int nbits) +/* Load up the bit buffer to a depth of at least nbits */ +{ + /* Copy heavily used state fields into locals (hopefully registers) */ + register const JOCTET * next_input_byte = state->next_input_byte; + register size_t bytes_in_buffer = state->bytes_in_buffer; + j_decompress_ptr cinfo = state->cinfo; + + /* Attempt to load at least MIN_GET_BITS bits into get_buffer. */ + /* (It is assumed that no request will be for more than that many bits.) */ + /* We fail to do so only if we hit a marker or are forced to suspend. */ + + if (cinfo->unread_marker == 0) { /* cannot advance past a marker */ + while (bits_left < MIN_GET_BITS) { + register int c; + + /* Attempt to read a byte */ + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + + /* If it's 0xFF, check and discard stuffed zero byte */ + if (c == 0xFF) { + /* Loop here to discard any padding FF's on terminating marker, + * so that we can save a valid unread_marker value. NOTE: we will + * accept multiple FF's followed by a 0 as meaning a single FF data + * byte. This data pattern is not valid according to the standard. + */ + do { + if (bytes_in_buffer == 0) { + if (! (*cinfo->src->fill_input_buffer) (cinfo)) + return FALSE; + next_input_byte = cinfo->src->next_input_byte; + bytes_in_buffer = cinfo->src->bytes_in_buffer; + } + bytes_in_buffer--; + c = GETJOCTET(*next_input_byte++); + } while (c == 0xFF); + + if (c == 0) { + /* Found FF/00, which represents an FF data byte */ + c = 0xFF; + } else { + /* Oops, it's actually a marker indicating end of compressed data. + * Save the marker code for later use. + * Fine point: it might appear that we should save the marker into + * bitread working state, not straight into permanent state. But + * once we have hit a marker, we cannot need to suspend within the + * current MCU, because we will read no more bytes from the data + * source. So it is OK to update permanent state right away. + */ + cinfo->unread_marker = c; + /* See if we need to insert some fake zero bits. */ + goto no_more_bytes; + } + } + + /* OK, load c into get_buffer */ + get_buffer = (get_buffer << 8) | c; + bits_left += 8; + } /* end while */ + } else { + no_more_bytes: + /* We get here if we've read the marker that terminates the compressed + * data segment. There should be enough bits in the buffer register + * to satisfy the request; if so, no problem. + */ + if (nbits > bits_left) { + /* Uh-oh. Report corrupted data to user and stuff zeroes into + * the data stream, so that we can produce some kind of image. + * We use a nonvolatile flag to ensure that only one warning message + * appears per data segment. + */ + if (! ((huff_entropy_ptr) cinfo->entropy)->insufficient_data) { + WARNMS(cinfo, JWRN_HIT_MARKER); + ((huff_entropy_ptr) cinfo->entropy)->insufficient_data = TRUE; + } + /* Fill the buffer with zero bits */ + get_buffer <<= MIN_GET_BITS - bits_left; + bits_left = MIN_GET_BITS; + } + } + + /* Unload the local registers */ + state->next_input_byte = next_input_byte; + state->bytes_in_buffer = bytes_in_buffer; + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + return TRUE; +} + + +/* + * Figure F.12: extend sign bit. + * On some machines, a shift and sub will be faster than a table lookup. + */ + +#ifdef AVOID_TABLES + +#define BIT_MASK(nbits) ((1<<(nbits))-1) +#define HUFF_EXTEND(x,s) ((x) < (1<<((s)-1)) ? (x) - ((1<<(s))-1) : (x)) + +#else + +#define BIT_MASK(nbits) bmask[nbits] +#define HUFF_EXTEND(x,s) ((x) <= bmask[(s) - 1] ? (x) - bmask[s] : (x)) + +static const int bmask[16] = /* bmask[n] is mask for n rightmost bits */ + { 0, 0x0001, 0x0003, 0x0007, 0x000F, 0x001F, 0x003F, 0x007F, 0x00FF, + 0x01FF, 0x03FF, 0x07FF, 0x0FFF, 0x1FFF, 0x3FFF, 0x7FFF }; + +#endif /* AVOID_TABLES */ + + +/* + * Out-of-line code for Huffman code decoding. + */ + +LOCAL(int) +jpeg_huff_decode (bitread_working_state * state, + register bit_buf_type get_buffer, register int bits_left, + d_derived_tbl * htbl, int min_bits) +{ + register int l = min_bits; + register INT32 code; + + /* HUFF_DECODE has determined that the code is at least min_bits */ + /* bits long, so fetch that many bits in one swoop. */ + + CHECK_BIT_BUFFER(*state, l, return -1); + code = GET_BITS(l); + + /* Collect the rest of the Huffman code one bit at a time. */ + /* This is per Figure F.16 in the JPEG spec. */ + + while (code > htbl->maxcode[l]) { + code <<= 1; + CHECK_BIT_BUFFER(*state, 1, return -1); + code |= GET_BITS(1); + l++; + } + + /* Unload the local registers */ + state->get_buffer = get_buffer; + state->bits_left = bits_left; + + /* With garbage input we may reach the sentinel value l = 17. */ + + if (l > 16) { + WARNMS(state->cinfo, JWRN_HUFF_BAD_CODE); + return 0; /* fake a zero as the safest result */ + } + + return htbl->pub->huffval[ (int) (code + htbl->valoffset[l]) ]; +} + + +/* + * Check for a restart marker & resynchronize decoder. + * Returns FALSE if must suspend. + */ + +LOCAL(boolean) +process_restart (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci; + + /* Throw away any unused bits remaining in bit buffer; */ + /* include any full bytes in next_marker's count of discarded bytes */ + cinfo->marker->discarded_bytes += entropy->bitstate.bits_left / 8; + entropy->bitstate.bits_left = 0; + + /* Advance past the RSTn marker */ + if (! (*cinfo->marker->read_restart_marker) (cinfo)) + return FALSE; + + /* Re-initialize DC predictions to 0 */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) + entropy->saved.last_dc_val[ci] = 0; + /* Re-init EOB run count, too */ + entropy->saved.EOBRUN = 0; + + /* Reset restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; + + /* Reset out-of-data flag, unless read_restart_marker left us smack up + * against a marker. In that case we will end up treating the next data + * segment as empty, and we can avoid producing bogus output pixels by + * leaving the flag set. + */ + if (cinfo->unread_marker == 0) + entropy->insufficient_data = FALSE; + + return TRUE; +} + + +/* + * Huffman MCU decoding. + * Each of these routines decodes and returns one MCU's worth of + * Huffman-compressed coefficients. + * The coefficients are reordered from zigzag order into natural array order, + * but are not dequantized. + * + * The i'th block of the MCU is stored into the block pointed to by + * MCU_data[i]. WE ASSUME THIS AREA IS INITIALLY ZEROED BY THE CALLER. + * (Wholesale zeroing is usually a little faster than retail...) + * + * We return FALSE if data source requested suspension. In that case no + * changes have been made to permanent state. (Exception: some output + * coefficients may already have been assigned. This is harmless for + * spectral selection, since we'll just re-assign them on the next call. + * Successive approximation AC refinement has to be more careful, however.) + */ + +/* + * MCU decoding for DC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_DC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int Al = cinfo->Al; + register int s, r; + int blkn, ci; + JBLOCKROW block; + BITREAD_STATE_VARS; + savable_state state; + d_derived_tbl * tbl; + jpeg_component_info * compptr; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + tbl = entropy->derived_tbls[compptr->dc_tbl_no]; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + HUFF_DECODE(s, br_state, tbl, return FALSE, label1); + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + + /* Convert DC difference to actual value, update last_dc_val */ + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Scale and output the coefficient (assumes jpeg_natural_order[0]=0) */ + (*block)[0] = (JCOEF) (s << Al); + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC initial scan (either spectral selection, + * or first pass of successive approximation). + */ + +METHODDEF(boolean) +decode_mcu_AC_first (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, Al; + const int * natural_order; + JBLOCKROW block; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + Al = cinfo->Al; + natural_order = cinfo->natural_order; + + /* Load up working state. + * We can avoid loading/saving bitread state if in an EOB run. + */ + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + + if (EOBRUN > 0) /* if it's a band of zeroes... */ + EOBRUN--; /* ...process it now (we do nothing) */ + else { + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + for (k = cinfo->Ss; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, return FALSE, label2); + r = s >> 4; + s &= 15; + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Scale and output coefficient in natural (dezigzagged) order */ + (*block)[natural_order[k]] = (JCOEF) (s << Al); + } else { + if (r == 15) { /* ZRL */ + k += 15; /* skip 15 zeroes in band */ + } else { /* EOBr, run length is 2^r + appended bits */ + EOBRUN = 1 << r; + if (r) { /* EOBr, r > 0 */ + CHECK_BIT_BUFFER(br_state, r, return FALSE); + r = GET_BITS(r); + EOBRUN += r; + } + EOBRUN--; /* this band is processed at this moment */ + break; /* force end-of-band */ + } + } + } + + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + } + + /* Completed MCU, so update state */ + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for DC successive approximation refinement scan. + * Note: we assume such scans can be multi-component, although the spec + * is not very clear on the point. + */ + +METHODDEF(boolean) +decode_mcu_DC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + int blkn; + JBLOCKROW block; + BITREAD_STATE_VARS; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* Not worth the cycles to check insufficient_data here, + * since we will not change the data anyway if we read zeroes. + */ + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + block = MCU_data[blkn]; + + /* Encoded data is simply the next bit of the two's-complement DC value */ + CHECK_BIT_BUFFER(br_state, 1, return FALSE); + if (GET_BITS(1)) + (*block)[0] |= p1; + /* Note: since we use |=, repeating the assignment later is safe */ + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * MCU decoding for AC successive approximation refinement scan. + */ + +METHODDEF(boolean) +decode_mcu_AC_refine (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + register int s, k, r; + unsigned int EOBRUN; + int Se, p1, m1; + const int * natural_order; + JBLOCKROW block; + JCOEFPTR thiscoef; + BITREAD_STATE_VARS; + d_derived_tbl * tbl; + int num_newnz; + int newnz_pos[DCTSIZE2]; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, don't modify the MCU. + */ + if (! entropy->insufficient_data) { + + Se = cinfo->Se; + p1 = 1 << cinfo->Al; /* 1 in the bit position being coded */ + m1 = (-1) << cinfo->Al; /* -1 in the bit position being coded */ + natural_order = cinfo->natural_order; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + EOBRUN = entropy->saved.EOBRUN; /* only part of saved state we need */ + + /* There is always only one block per MCU */ + block = MCU_data[0]; + tbl = entropy->ac_derived_tbl; + + /* If we are forced to suspend, we must undo the assignments to any newly + * nonzero coefficients in the block, because otherwise we'd get confused + * next time about which coefficients were already nonzero. + * But we need not undo addition of bits to already-nonzero coefficients; + * instead, we can test the current bit to see if we already did it. + */ + num_newnz = 0; + + /* initialize coefficient loop counter to start of band */ + k = cinfo->Ss; + + if (EOBRUN == 0) { + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, tbl, goto undoit, label3); + r = s >> 4; + s &= 15; + if (s) { + if (s != 1) /* size of new coef should always be 1 */ + WARNMS(cinfo, JWRN_HUFF_BAD_CODE); + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) + s = p1; /* newly nonzero coef is positive */ + else + s = m1; /* newly nonzero coef is negative */ + } else { + if (r != 15) { + EOBRUN = 1 << r; /* EOBr, run length is 2^r + appended bits */ + if (r) { + CHECK_BIT_BUFFER(br_state, r, goto undoit); + r = GET_BITS(r); + EOBRUN += r; + } + break; /* rest of block is handled by EOB logic */ + } + /* note s = 0 for processing ZRL */ + } + /* Advance over already-nonzero coefs and r still-zero coefs, + * appending correction bits to the nonzeroes. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + do { + thiscoef = *block + natural_order[k]; + if (*thiscoef != 0) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already set it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } else { + if (--r < 0) + break; /* reached target zero coefficient */ + } + k++; + } while (k <= Se); + if (s) { + int pos = natural_order[k]; + /* Output newly nonzero coefficient */ + (*block)[pos] = (JCOEF) s; + /* Remember its position in case we have to suspend */ + newnz_pos[num_newnz++] = pos; + } + } + } + + if (EOBRUN > 0) { + /* Scan any remaining coefficient positions after the end-of-band + * (the last newly nonzero coefficient, if any). Append a correction + * bit to each already-nonzero coefficient. A correction bit is 1 + * if the absolute value of the coefficient must be increased. + */ + for (; k <= Se; k++) { + thiscoef = *block + natural_order[k]; + if (*thiscoef != 0) { + CHECK_BIT_BUFFER(br_state, 1, goto undoit); + if (GET_BITS(1)) { + if ((*thiscoef & p1) == 0) { /* do nothing if already changed it */ + if (*thiscoef >= 0) + *thiscoef += p1; + else + *thiscoef += m1; + } + } + } + } + /* Count one block completed in EOB run */ + EOBRUN--; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + entropy->saved.EOBRUN = EOBRUN; /* only part of saved state we need */ + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; + +undoit: + /* Re-zero any output coefficients that we made newly nonzero */ + while (num_newnz > 0) + (*block)[newnz_pos[--num_newnz]] = 0; + + return FALSE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * partial blocks. + */ + +METHODDEF(boolean) +decode_mcu_sub (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + const int * natural_order; + int Se, blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + natural_order = cinfo->natural_order; + Se = cinfo->lim_Se; + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in natural_order[] will save us + * if k > Se, which could happen if the data is corrupted. + */ + (*block)[natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k <= Se; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Decode one MCU's worth of Huffman-compressed coefficients, + * full-size blocks. + */ + +METHODDEF(boolean) +decode_mcu (j_decompress_ptr cinfo, JBLOCKROW *MCU_data) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int blkn; + BITREAD_STATE_VARS; + savable_state state; + + /* Process restart marker if needed; may have to suspend */ + if (cinfo->restart_interval) { + if (entropy->restarts_to_go == 0) + if (! process_restart(cinfo)) + return FALSE; + } + + /* If we've run out of data, just leave the MCU set to zeroes. + * This way, we return uniform gray for the remainder of the segment. + */ + if (! entropy->insufficient_data) { + + /* Load up working state */ + BITREAD_LOAD_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(state, entropy->saved); + + /* Outer loop handles each block in the MCU */ + + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + JBLOCKROW block = MCU_data[blkn]; + d_derived_tbl * htbl; + register int s, k, r; + int coef_limit, ci; + + /* Decode a single block's worth of coefficients */ + + /* Section F.2.2.1: decode the DC coefficient difference */ + htbl = entropy->dc_cur_tbls[blkn]; + HUFF_DECODE(s, br_state, htbl, return FALSE, label1); + + htbl = entropy->ac_cur_tbls[blkn]; + k = 1; + coef_limit = entropy->coef_limit[blkn]; + if (coef_limit) { + /* Convert DC difference to actual value, update last_dc_val */ + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + } + ci = cinfo->MCU_membership[blkn]; + s += state.last_dc_val[ci]; + state.last_dc_val[ci] = s; + /* Output the DC coefficient */ + (*block)[0] = (JCOEF) s; + + /* Section F.2.2.2: decode the AC coefficients */ + /* Since zeroes are skipped, output area must be cleared beforehand */ + for (; k < coef_limit; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label2); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + r = GET_BITS(s); + s = HUFF_EXTEND(r, s); + /* Output coefficient in natural (dezigzagged) order. + * Note: the extra entries in jpeg_natural_order[] will save us + * if k >= DCTSIZE2, which could happen if the data is corrupted. + */ + (*block)[jpeg_natural_order[k]] = (JCOEF) s; + } else { + if (r != 15) + goto EndOfBlock; + k += 15; + } + } + } else { + if (s) { + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } + } + + /* Section F.2.2.2: decode the AC coefficients */ + /* In this path we just discard the values */ + for (; k < DCTSIZE2; k++) { + HUFF_DECODE(s, br_state, htbl, return FALSE, label3); + + r = s >> 4; + s &= 15; + + if (s) { + k += r; + CHECK_BIT_BUFFER(br_state, s, return FALSE); + DROP_BITS(s); + } else { + if (r != 15) + break; + k += 15; + } + } + + EndOfBlock: ; + } + + /* Completed MCU, so update state */ + BITREAD_SAVE_STATE(cinfo,entropy->bitstate); + ASSIGN_STATE(entropy->saved, state); + } + + /* Account for restart interval (no-op if not using restarts) */ + entropy->restarts_to_go--; + + return TRUE; +} + + +/* + * Initialize for a Huffman-compressed scan. + */ + +METHODDEF(void) +start_pass_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy = (huff_entropy_ptr) cinfo->entropy; + int ci, blkn, tbl, i; + jpeg_component_info * compptr; + + if (cinfo->progressive_mode) { + /* Validate progressive scan parameters */ + if (cinfo->Ss == 0) { + if (cinfo->Se != 0) + goto bad; + } else { + /* need not check Ss/Se < 0 since they came from unsigned bytes */ + if (cinfo->Se < cinfo->Ss || cinfo->Se > cinfo->lim_Se) + goto bad; + /* AC scans may have only one component */ + if (cinfo->comps_in_scan != 1) + goto bad; + } + if (cinfo->Ah != 0) { + /* Successive approximation refinement scan: must have Al = Ah-1. */ + if (cinfo->Ah-1 != cinfo->Al) + goto bad; + } + if (cinfo->Al > 13) { /* need not check for < 0 */ + /* Arguably the maximum Al value should be less than 13 for 8-bit precision, + * but the spec doesn't say so, and we try to be liberal about what we + * accept. Note: large Al values could result in out-of-range DC + * coefficients during early scans, leading to bizarre displays due to + * overflows in the IDCT math. But we won't crash. + */ + bad: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + } + /* Update progression status, and verify that scan order is legal. + * Note that inter-scan inconsistencies are treated as warnings + * not fatal errors ... not clear if this is right way to behave. + */ + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + int coefi, cindex = cinfo->cur_comp_info[ci]->component_index; + int *coef_bit_ptr = & cinfo->coef_bits[cindex][0]; + if (cinfo->Ss && coef_bit_ptr[0] < 0) /* AC without prior DC scan */ + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, 0); + for (coefi = cinfo->Ss; coefi <= cinfo->Se; coefi++) { + int expected = (coef_bit_ptr[coefi] < 0) ? 0 : coef_bit_ptr[coefi]; + if (cinfo->Ah != expected) + WARNMS2(cinfo, JWRN_BOGUS_PROGRESSION, cindex, coefi); + coef_bit_ptr[coefi] = cinfo->Al; + } + } + + /* Select MCU decoding routine */ + if (cinfo->Ah == 0) { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_first; + else + entropy->pub.decode_mcu = decode_mcu_AC_first; + } else { + if (cinfo->Ss == 0) + entropy->pub.decode_mcu = decode_mcu_DC_refine; + else + entropy->pub.decode_mcu = decode_mcu_AC_refine; + } + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Make sure requested tables are present, and compute derived tables. + * We may build same derived table more than once, but it's not expensive. + */ + if (cinfo->Ss == 0) { + if (cinfo->Ah == 0) { /* DC refinement needs no table */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->derived_tbls[tbl]); + } + } else { + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->derived_tbls[tbl]); + /* remember the single active table */ + entropy->ac_derived_tbl = entropy->derived_tbls[tbl]; + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Initialize private state variables */ + entropy->saved.EOBRUN = 0; + } else { + /* Check that the scan parameters Ss, Se, Ah/Al are OK for sequential JPEG. + * This ought to be an error condition, but we make it a warning because + * there are some baseline files out there with all zeroes in these bytes. + */ + if (cinfo->Ss != 0 || cinfo->Ah != 0 || cinfo->Al != 0 || + ((cinfo->is_baseline || cinfo->Se < DCTSIZE2) && + cinfo->Se != cinfo->lim_Se)) + WARNMS(cinfo, JWRN_NOT_SEQUENTIAL); + + /* Select MCU decoding routine */ + /* We retain the hard-coded case for full-size blocks. + * This is not necessary, but it appears that this version is slightly + * more performant in the given implementation. + * With an improved implementation we would prefer a single optimized + * function. + */ + if (cinfo->lim_Se != DCTSIZE2-1) + entropy->pub.decode_mcu = decode_mcu_sub; + else + entropy->pub.decode_mcu = decode_mcu; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Compute derived values for Huffman tables */ + /* We may do this more than once for a table, but it's not expensive */ + tbl = compptr->dc_tbl_no; + jpeg_make_d_derived_tbl(cinfo, TRUE, tbl, + & entropy->dc_derived_tbls[tbl]); + if (cinfo->lim_Se) { /* AC needs no table when not present */ + tbl = compptr->ac_tbl_no; + jpeg_make_d_derived_tbl(cinfo, FALSE, tbl, + & entropy->ac_derived_tbls[tbl]); + } + /* Initialize DC predictions to 0 */ + entropy->saved.last_dc_val[ci] = 0; + } + + /* Precalculate decoding info for each block in an MCU of this scan */ + for (blkn = 0; blkn < cinfo->blocks_in_MCU; blkn++) { + ci = cinfo->MCU_membership[blkn]; + compptr = cinfo->cur_comp_info[ci]; + /* Precalculate which table to use for each block */ + entropy->dc_cur_tbls[blkn] = entropy->dc_derived_tbls[compptr->dc_tbl_no]; + entropy->ac_cur_tbls[blkn] = entropy->ac_derived_tbls[compptr->ac_tbl_no]; + /* Decide whether we really care about the coefficient values */ + if (compptr->component_needed) { + ci = compptr->DCT_v_scaled_size; + i = compptr->DCT_h_scaled_size; + switch (cinfo->lim_Se) { + case (1*1-1): + entropy->coef_limit[blkn] = 1; + break; + case (2*2-1): + if (ci <= 0 || ci > 2) ci = 2; + if (i <= 0 || i > 2) i = 2; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order2[ci - 1][i - 1]; + break; + case (3*3-1): + if (ci <= 0 || ci > 3) ci = 3; + if (i <= 0 || i > 3) i = 3; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order3[ci - 1][i - 1]; + break; + case (4*4-1): + if (ci <= 0 || ci > 4) ci = 4; + if (i <= 0 || i > 4) i = 4; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order4[ci - 1][i - 1]; + break; + case (5*5-1): + if (ci <= 0 || ci > 5) ci = 5; + if (i <= 0 || i > 5) i = 5; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order5[ci - 1][i - 1]; + break; + case (6*6-1): + if (ci <= 0 || ci > 6) ci = 6; + if (i <= 0 || i > 6) i = 6; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order6[ci - 1][i - 1]; + break; + case (7*7-1): + if (ci <= 0 || ci > 7) ci = 7; + if (i <= 0 || i > 7) i = 7; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order7[ci - 1][i - 1]; + break; + default: + if (ci <= 0 || ci > 8) ci = 8; + if (i <= 0 || i > 8) i = 8; + entropy->coef_limit[blkn] = 1 + jpeg_zigzag_order[ci - 1][i - 1]; + break; + } + } else { + entropy->coef_limit[blkn] = 0; + } + } + } + + /* Initialize bitread state variables */ + entropy->bitstate.bits_left = 0; + entropy->bitstate.get_buffer = 0; /* unnecessary, but keeps Purify quiet */ + entropy->insufficient_data = FALSE; + + /* Initialize restart counter */ + entropy->restarts_to_go = cinfo->restart_interval; +} + + +/* + * Module initialization routine for Huffman entropy decoding. + */ + +GLOBAL(void) +jinit_huff_decoder (j_decompress_ptr cinfo) +{ + huff_entropy_ptr entropy; + int i; + + entropy = (huff_entropy_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(huff_entropy_decoder)); + cinfo->entropy = (struct jpeg_entropy_decoder *) entropy; + entropy->pub.start_pass = start_pass_huff_decoder; + + if (cinfo->progressive_mode) { + /* Create progression status table */ + int *coef_bit_ptr, ci; + cinfo->coef_bits = (int (*)[DCTSIZE2]) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components*DCTSIZE2*SIZEOF(int)); + coef_bit_ptr = & cinfo->coef_bits[0][0]; + for (ci = 0; ci < cinfo->num_components; ci++) + for (i = 0; i < DCTSIZE2; i++) + *coef_bit_ptr++ = -1; + + /* Mark derived tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->derived_tbls[i] = NULL; + } + } else { + /* Mark tables unallocated */ + for (i = 0; i < NUM_HUFF_TBLS; i++) { + entropy->dc_derived_tbls[i] = entropy->ac_derived_tbls[i] = NULL; + } + } +} diff --git a/src/3rdparty/libjpeg/jdinput.c b/src/3rdparty/libjpeg/jdinput.c new file mode 100644 index 0000000..2c5c717 --- /dev/null +++ b/src/3rdparty/libjpeg/jdinput.c @@ -0,0 +1,661 @@ +/* + * jdinput.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains input control logic for the JPEG decompressor. + * These routines are concerned with controlling the decompressor's input + * processing (marker reading and coefficient decoding). The actual input + * reading is done in jdmarker.c, jdhuff.c, and jdarith.c. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_input_controller pub; /* public fields */ + + int inheaders; /* Nonzero until first SOS is reached */ +} my_input_controller; + +typedef my_input_controller * my_inputctl_ptr; + + +/* Forward declarations */ +METHODDEF(int) consume_markers JPP((j_decompress_ptr cinfo)); + + +/* + * Routines to calculate various quantities related to the size of the image. + */ + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + */ + +GLOBAL(void) +jpeg_core_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for transcoding and full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; + + /* Compute actual output image dimensions and DCT scaling choices. */ + if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom) { + /* Provide 1/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 1; + cinfo->min_DCT_v_scaled_size = 1; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 2) { + /* Provide 2/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 2L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 2L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 2; + cinfo->min_DCT_v_scaled_size = 2; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 3) { + /* Provide 3/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 3L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 3L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 3; + cinfo->min_DCT_v_scaled_size = 3; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 4) { + /* Provide 4/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 4L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 4L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 4; + cinfo->min_DCT_v_scaled_size = 4; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 5) { + /* Provide 5/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 5L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 5L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 5; + cinfo->min_DCT_v_scaled_size = 5; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 6) { + /* Provide 6/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 6L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 6L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 6; + cinfo->min_DCT_v_scaled_size = 6; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 7) { + /* Provide 7/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 7L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 7L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 7; + cinfo->min_DCT_v_scaled_size = 7; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 8) { + /* Provide 8/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 8L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 8L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 8; + cinfo->min_DCT_v_scaled_size = 8; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 9) { + /* Provide 9/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 9L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 9L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 9; + cinfo->min_DCT_v_scaled_size = 9; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 10) { + /* Provide 10/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 10L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 10L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 10; + cinfo->min_DCT_v_scaled_size = 10; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 11) { + /* Provide 11/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 11L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 11L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 11; + cinfo->min_DCT_v_scaled_size = 11; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 12) { + /* Provide 12/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 12L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 12L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 12; + cinfo->min_DCT_v_scaled_size = 12; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 13) { + /* Provide 13/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 13L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 13L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 13; + cinfo->min_DCT_v_scaled_size = 13; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 14) { + /* Provide 14/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 14L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 14L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 14; + cinfo->min_DCT_v_scaled_size = 14; + } else if (cinfo->scale_num * cinfo->block_size <= cinfo->scale_denom * 15) { + /* Provide 15/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 15L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 15L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 15; + cinfo->min_DCT_v_scaled_size = 15; + } else { + /* Provide 16/block_size scaling */ + cinfo->output_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * 16L, (long) cinfo->block_size); + cinfo->output_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * 16L, (long) cinfo->block_size); + cinfo->min_DCT_h_scaled_size = 16; + cinfo->min_DCT_v_scaled_size = 16; + } + + /* Recompute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size; + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size; + } + +#else /* !IDCT_SCALING_SUPPORTED */ + + /* Hardwire it to "no scaling" */ + cinfo->output_width = cinfo->image_width; + cinfo->output_height = cinfo->image_height; + /* jdinput.c has already initialized DCT_scaled_size, + * and has computed unscaled downsampled_width and downsampled_height. + */ + +#endif /* IDCT_SCALING_SUPPORTED */ +} + + +LOCAL(void) +initial_setup (j_decompress_ptr cinfo) +/* Called once, when first SOS marker is reached */ +{ + int ci; + jpeg_component_info *compptr; + + /* Make sure image isn't bigger than I can handle */ + if ((long) cinfo->image_height > (long) JPEG_MAX_DIMENSION || + (long) cinfo->image_width > (long) JPEG_MAX_DIMENSION) + ERREXIT1(cinfo, JERR_IMAGE_TOO_BIG, (unsigned int) JPEG_MAX_DIMENSION); + + /* For now, precision must match compiled-in value... */ + if (cinfo->data_precision != BITS_IN_JSAMPLE) + ERREXIT1(cinfo, JERR_BAD_PRECISION, cinfo->data_precision); + + /* Check that number of components won't exceed internal array sizes */ + if (cinfo->num_components > MAX_COMPONENTS) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->num_components, + MAX_COMPONENTS); + + /* Compute maximum sampling factors; check factor validity */ + cinfo->max_h_samp_factor = 1; + cinfo->max_v_samp_factor = 1; + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (compptr->h_samp_factor<=0 || compptr->h_samp_factor>MAX_SAMP_FACTOR || + compptr->v_samp_factor<=0 || compptr->v_samp_factor>MAX_SAMP_FACTOR) + ERREXIT(cinfo, JERR_BAD_SAMPLING); + cinfo->max_h_samp_factor = MAX(cinfo->max_h_samp_factor, + compptr->h_samp_factor); + cinfo->max_v_samp_factor = MAX(cinfo->max_v_samp_factor, + compptr->v_samp_factor); + } + + /* Derive block_size, natural_order, and lim_Se */ + if (cinfo->is_baseline || (cinfo->progressive_mode && + cinfo->comps_in_scan)) { /* no pseudo SOS marker */ + cinfo->block_size = DCTSIZE; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + } else + switch (cinfo->Se) { + case (1*1-1): + cinfo->block_size = 1; + cinfo->natural_order = jpeg_natural_order; /* not needed */ + cinfo->lim_Se = cinfo->Se; + break; + case (2*2-1): + cinfo->block_size = 2; + cinfo->natural_order = jpeg_natural_order2; + cinfo->lim_Se = cinfo->Se; + break; + case (3*3-1): + cinfo->block_size = 3; + cinfo->natural_order = jpeg_natural_order3; + cinfo->lim_Se = cinfo->Se; + break; + case (4*4-1): + cinfo->block_size = 4; + cinfo->natural_order = jpeg_natural_order4; + cinfo->lim_Se = cinfo->Se; + break; + case (5*5-1): + cinfo->block_size = 5; + cinfo->natural_order = jpeg_natural_order5; + cinfo->lim_Se = cinfo->Se; + break; + case (6*6-1): + cinfo->block_size = 6; + cinfo->natural_order = jpeg_natural_order6; + cinfo->lim_Se = cinfo->Se; + break; + case (7*7-1): + cinfo->block_size = 7; + cinfo->natural_order = jpeg_natural_order7; + cinfo->lim_Se = cinfo->Se; + break; + case (8*8-1): + cinfo->block_size = 8; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (9*9-1): + cinfo->block_size = 9; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (10*10-1): + cinfo->block_size = 10; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (11*11-1): + cinfo->block_size = 11; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (12*12-1): + cinfo->block_size = 12; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (13*13-1): + cinfo->block_size = 13; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (14*14-1): + cinfo->block_size = 14; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (15*15-1): + cinfo->block_size = 15; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + case (16*16-1): + cinfo->block_size = 16; + cinfo->natural_order = jpeg_natural_order; + cinfo->lim_Se = DCTSIZE2-1; + break; + default: + ERREXIT4(cinfo, JERR_BAD_PROGRESSION, + cinfo->Ss, cinfo->Se, cinfo->Ah, cinfo->Al); + break; + } + + /* We initialize DCT_scaled_size and min_DCT_scaled_size to block_size. + * In the full decompressor, + * this will be overridden by jpeg_calc_output_dimensions in jdmaster.c; + * but in the transcoder, + * jpeg_calc_output_dimensions is not used, so we must do it here. + */ + cinfo->min_DCT_h_scaled_size = cinfo->block_size; + cinfo->min_DCT_v_scaled_size = cinfo->block_size; + + /* Compute dimensions of components */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->DCT_h_scaled_size = cinfo->block_size; + compptr->DCT_v_scaled_size = cinfo->block_size; + /* Size in DCT blocks */ + compptr->width_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->height_in_blocks = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + /* downsampled_width and downsampled_height will also be overridden by + * jdmaster.c if we are doing full decompression. The transcoder library + * doesn't use these values, but the calling application might. + */ + /* Size in samples */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * (long) compptr->h_samp_factor, + (long) cinfo->max_h_samp_factor); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * (long) compptr->v_samp_factor, + (long) cinfo->max_v_samp_factor); + /* Mark component needed, until color conversion says otherwise */ + compptr->component_needed = TRUE; + /* Mark no quantization table yet saved for component */ + compptr->quant_table = NULL; + } + + /* Compute number of fully interleaved MCU rows. */ + cinfo->total_iMCU_rows = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + /* Decide whether file contains multiple scans */ + if (cinfo->comps_in_scan < cinfo->num_components || cinfo->progressive_mode) + cinfo->inputctl->has_multiple_scans = TRUE; + else + cinfo->inputctl->has_multiple_scans = FALSE; +} + + +LOCAL(void) +per_scan_setup (j_decompress_ptr cinfo) +/* Do computations that are needed before processing a JPEG scan */ +/* cinfo->comps_in_scan and cinfo->cur_comp_info[] were set from SOS marker */ +{ + int ci, mcublks, tmp; + jpeg_component_info *compptr; + + if (cinfo->comps_in_scan == 1) { + + /* Noninterleaved (single-component) scan */ + compptr = cinfo->cur_comp_info[0]; + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = compptr->width_in_blocks; + cinfo->MCU_rows_in_scan = compptr->height_in_blocks; + + /* For noninterleaved scan, always one block per MCU */ + compptr->MCU_width = 1; + compptr->MCU_height = 1; + compptr->MCU_blocks = 1; + compptr->MCU_sample_width = compptr->DCT_h_scaled_size; + compptr->last_col_width = 1; + /* For noninterleaved scans, it is convenient to define last_row_height + * as the number of block rows present in the last iMCU row. + */ + tmp = (int) (compptr->height_in_blocks % compptr->v_samp_factor); + if (tmp == 0) tmp = compptr->v_samp_factor; + compptr->last_row_height = tmp; + + /* Prepare array describing MCU composition */ + cinfo->blocks_in_MCU = 1; + cinfo->MCU_membership[0] = 0; + + } else { + + /* Interleaved (multi-component) scan */ + if (cinfo->comps_in_scan <= 0 || cinfo->comps_in_scan > MAX_COMPS_IN_SCAN) + ERREXIT2(cinfo, JERR_COMPONENT_COUNT, cinfo->comps_in_scan, + MAX_COMPS_IN_SCAN); + + /* Overall image size in MCUs */ + cinfo->MCUs_per_row = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width, + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + cinfo->MCU_rows_in_scan = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height, + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + + cinfo->blocks_in_MCU = 0; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* Sampling factors give # of blocks of component in each MCU */ + compptr->MCU_width = compptr->h_samp_factor; + compptr->MCU_height = compptr->v_samp_factor; + compptr->MCU_blocks = compptr->MCU_width * compptr->MCU_height; + compptr->MCU_sample_width = compptr->MCU_width * compptr->DCT_h_scaled_size; + /* Figure number of non-dummy blocks in last MCU column & row */ + tmp = (int) (compptr->width_in_blocks % compptr->MCU_width); + if (tmp == 0) tmp = compptr->MCU_width; + compptr->last_col_width = tmp; + tmp = (int) (compptr->height_in_blocks % compptr->MCU_height); + if (tmp == 0) tmp = compptr->MCU_height; + compptr->last_row_height = tmp; + /* Prepare array describing MCU composition */ + mcublks = compptr->MCU_blocks; + if (cinfo->blocks_in_MCU + mcublks > D_MAX_BLOCKS_IN_MCU) + ERREXIT(cinfo, JERR_BAD_MCU_SIZE); + while (mcublks-- > 0) { + cinfo->MCU_membership[cinfo->blocks_in_MCU++] = ci; + } + } + + } +} + + +/* + * Save away a copy of the Q-table referenced by each component present + * in the current scan, unless already saved during a prior scan. + * + * In a multiple-scan JPEG file, the encoder could assign different components + * the same Q-table slot number, but change table definitions between scans + * so that each component uses a different Q-table. (The IJG encoder is not + * currently capable of doing this, but other encoders might.) Since we want + * to be able to dequantize all the components at the end of the file, this + * means that we have to save away the table actually used for each component. + * We do this by copying the table at the start of the first scan containing + * the component. + * The JPEG spec prohibits the encoder from changing the contents of a Q-table + * slot between scans of a component using that slot. If the encoder does so + * anyway, this decoder will simply use the Q-table values that were current + * at the start of the first scan for the component. + * + * The decompressor output side looks only at the saved quant tables, + * not at the current Q-table slots. + */ + +LOCAL(void) +latch_quant_tables (j_decompress_ptr cinfo) +{ + int ci, qtblno; + jpeg_component_info *compptr; + JQUANT_TBL * qtbl; + + for (ci = 0; ci < cinfo->comps_in_scan; ci++) { + compptr = cinfo->cur_comp_info[ci]; + /* No work if we already saved Q-table for this component */ + if (compptr->quant_table != NULL) + continue; + /* Make sure specified quantization table is present */ + qtblno = compptr->quant_tbl_no; + if (qtblno < 0 || qtblno >= NUM_QUANT_TBLS || + cinfo->quant_tbl_ptrs[qtblno] == NULL) + ERREXIT1(cinfo, JERR_NO_QUANT_TABLE, qtblno); + /* OK, save away the quantization table */ + qtbl = (JQUANT_TBL *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(JQUANT_TBL)); + MEMCOPY(qtbl, cinfo->quant_tbl_ptrs[qtblno], SIZEOF(JQUANT_TBL)); + compptr->quant_table = qtbl; + } +} + + +/* + * Initialize the input modules to read a scan of compressed data. + * The first call to this is done by jdmaster.c after initializing + * the entire decompressor (during jpeg_start_decompress). + * Subsequent calls come from consume_markers, below. + */ + +METHODDEF(void) +start_input_pass (j_decompress_ptr cinfo) +{ + per_scan_setup(cinfo); + latch_quant_tables(cinfo); + (*cinfo->entropy->start_pass) (cinfo); + (*cinfo->coef->start_input_pass) (cinfo); + cinfo->inputctl->consume_input = cinfo->coef->consume_data; +} + + +/* + * Finish up after inputting a compressed-data scan. + * This is called by the coefficient controller after it's read all + * the expected data of the scan. + */ + +METHODDEF(void) +finish_input_pass (j_decompress_ptr cinfo) +{ + cinfo->inputctl->consume_input = consume_markers; +} + + +/* + * Read JPEG markers before, between, or after compressed-data scans. + * Change state as necessary when a new scan is reached. + * Return value is JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * The consume_input method pointer points either here or to the + * coefficient controller's consume_data routine, depending on whether + * we are reading a compressed data segment or inter-segment markers. + * + * Note: This function should NOT return a pseudo SOS marker (with zero + * component number) to the caller. A pseudo marker received by + * read_markers is processed and then skipped for other markers. + */ + +METHODDEF(int) +consume_markers (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + int val; + + if (inputctl->pub.eoi_reached) /* After hitting EOI, read no further */ + return JPEG_REACHED_EOI; + + for (;;) { /* Loop to pass pseudo SOS marker */ + val = (*cinfo->marker->read_markers) (cinfo); + + switch (val) { + case JPEG_REACHED_SOS: /* Found SOS */ + if (inputctl->inheaders) { /* 1st SOS */ + if (inputctl->inheaders == 1) + initial_setup(cinfo); + if (cinfo->comps_in_scan == 0) { /* pseudo SOS marker */ + inputctl->inheaders = 2; + break; + } + inputctl->inheaders = 0; + /* Note: start_input_pass must be called by jdmaster.c + * before any more input can be consumed. jdapimin.c is + * responsible for enforcing this sequencing. + */ + } else { /* 2nd or later SOS marker */ + if (! inputctl->pub.has_multiple_scans) + ERREXIT(cinfo, JERR_EOI_EXPECTED); /* Oops, I wasn't expecting this! */ + if (cinfo->comps_in_scan == 0) /* unexpected pseudo SOS marker */ + break; + start_input_pass(cinfo); + } + return val; + case JPEG_REACHED_EOI: /* Found EOI */ + inputctl->pub.eoi_reached = TRUE; + if (inputctl->inheaders) { /* Tables-only datastream, apparently */ + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_NO_SOS); + } else { + /* Prevent infinite loop in coef ctlr's decompress_data routine + * if user set output_scan_number larger than number of scans. + */ + if (cinfo->output_scan_number > cinfo->input_scan_number) + cinfo->output_scan_number = cinfo->input_scan_number; + } + return val; + case JPEG_SUSPENDED: + return val; + default: + return val; + } + } +} + + +/* + * Reset state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl = (my_inputctl_ptr) cinfo->inputctl; + + inputctl->pub.consume_input = consume_markers; + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; + /* Reset other modules */ + (*cinfo->err->reset_error_mgr) ((j_common_ptr) cinfo); + (*cinfo->marker->reset_marker_reader) (cinfo); + /* Reset progression state -- would be cleaner if entropy decoder did this */ + cinfo->coef_bits = NULL; +} + + +/* + * Initialize the input controller module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_input_controller (j_decompress_ptr cinfo) +{ + my_inputctl_ptr inputctl; + + /* Create subobject in permanent pool */ + inputctl = (my_inputctl_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_input_controller)); + cinfo->inputctl = (struct jpeg_input_controller *) inputctl; + /* Initialize method pointers */ + inputctl->pub.consume_input = consume_markers; + inputctl->pub.reset_input_controller = reset_input_controller; + inputctl->pub.start_input_pass = start_input_pass; + inputctl->pub.finish_input_pass = finish_input_pass; + /* Initialize state: can't use reset_input_controller since we don't + * want to try to reset other modules yet. + */ + inputctl->pub.has_multiple_scans = FALSE; /* "unknown" would be better */ + inputctl->pub.eoi_reached = FALSE; + inputctl->inheaders = 1; +} diff --git a/src/3rdparty/libjpeg/jdmainct.c b/src/3rdparty/libjpeg/jdmainct.c new file mode 100644 index 0000000..02723ca --- /dev/null +++ b/src/3rdparty/libjpeg/jdmainct.c @@ -0,0 +1,512 @@ +/* + * jdmainct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the main buffer controller for decompression. + * The main buffer lies between the JPEG decompressor proper and the + * post-processor; it holds downsampled data in the JPEG colorspace. + * + * Note that this code is bypassed in raw-data mode, since the application + * supplies the equivalent of the main buffer in that case. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * In the current system design, the main buffer need never be a full-image + * buffer; any full-height buffers will be found inside the coefficient or + * postprocessing controllers. Nonetheless, the main controller is not + * trivial. Its responsibility is to provide context rows for upsampling/ + * rescaling, and doing this in an efficient fashion is a bit tricky. + * + * Postprocessor input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_scaled_size / min_DCT_scaled_size) + * sample rows of each component. (We require DCT_scaled_size values to be + * chosen such that these numbers are integers. In practice DCT_scaled_size + * values will likely be powers of two, so we actually have the stronger + * condition that DCT_scaled_size / min_DCT_scaled_size is an integer.) + * Upsampling will typically produce max_v_samp_factor pixel rows from each + * row group (times any additional scale factor that the upsampler is + * applying). + * + * The coefficient controller will deliver data to us one iMCU row at a time; + * each iMCU row contains v_samp_factor * DCT_scaled_size sample rows, or + * exactly min_DCT_scaled_size row groups. (This amount of data corresponds + * to one row of MCUs when the image is fully interleaved.) Note that the + * number of sample rows varies across components, but the number of row + * groups does not. Some garbage sample rows may be included in the last iMCU + * row at the bottom of the image. + * + * Depending on the vertical scaling algorithm used, the upsampler may need + * access to the sample row(s) above and below its current input row group. + * The upsampler is required to set need_context_rows TRUE at global selection + * time if so. When need_context_rows is FALSE, this controller can simply + * obtain one iMCU row at a time from the coefficient controller and dole it + * out as row groups to the postprocessor. + * + * When need_context_rows is TRUE, this controller guarantees that the buffer + * passed to postprocessing contains at least one row group's worth of samples + * above and below the row group(s) being processed. Note that the context + * rows "above" the first passed row group appear at negative row offsets in + * the passed buffer. At the top and bottom of the image, the required + * context rows are manufactured by duplicating the first or last real sample + * row; this avoids having special cases in the upsampling inner loops. + * + * The amount of context is fixed at one row group just because that's a + * convenient number for this controller to work with. The existing + * upsamplers really only need one sample row of context. An upsampler + * supporting arbitrary output rescaling might wish for more than one row + * group of context when shrinking the image; tough, we don't handle that. + * (This is justified by the assumption that downsizing will be handled mostly + * by adjusting the DCT_scaled_size values, so that the actual scale factor at + * the upsample step needn't be much less than one.) + * + * To provide the desired context, we have to retain the last two row groups + * of one iMCU row while reading in the next iMCU row. (The last row group + * can't be processed until we have another row group for its below-context, + * and so we have to save the next-to-last group too for its above-context.) + * We could do this most simply by copying data around in our buffer, but + * that'd be very slow. We can avoid copying any data by creating a rather + * strange pointer structure. Here's how it works. We allocate a workspace + * consisting of M+2 row groups (where M = min_DCT_scaled_size is the number + * of row groups per iMCU row). We create two sets of redundant pointers to + * the workspace. Labeling the physical row groups 0 to M+1, the synthesized + * pointer lists look like this: + * M+1 M-1 + * master pointer --> 0 master pointer --> 0 + * 1 1 + * ... ... + * M-3 M-3 + * M-2 M + * M-1 M+1 + * M M-2 + * M+1 M-1 + * 0 0 + * We read alternate iMCU rows using each master pointer; thus the last two + * row groups of the previous iMCU row remain un-overwritten in the workspace. + * The pointer lists are set up so that the required context rows appear to + * be adjacent to the proper places when we pass the pointer lists to the + * upsampler. + * + * The above pictures describe the normal state of the pointer lists. + * At top and bottom of the image, we diddle the pointer lists to duplicate + * the first or last sample row as necessary (this is cheaper than copying + * sample rows around). + * + * This scheme breaks down if M < 2, ie, min_DCT_scaled_size is 1. In that + * situation each iMCU row provides only one row group so the buffering logic + * must be different (eg, we must read two iMCU rows before we can emit the + * first row group). For now, we simply do not support providing context + * rows when min_DCT_scaled_size is 1. That combination seems unlikely to + * be worth providing --- if someone wants a 1/8th-size preview, they probably + * want it quick and dirty, so a context-free upsampler is sufficient. + */ + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_main_controller pub; /* public fields */ + + /* Pointer to allocated workspace (M or M+2 row groups). */ + JSAMPARRAY buffer[MAX_COMPONENTS]; + + boolean buffer_full; /* Have we gotten an iMCU row from decoder? */ + JDIMENSION rowgroup_ctr; /* counts row groups output to postprocessor */ + + /* Remaining fields are only used in the context case. */ + + /* These are the master pointers to the funny-order pointer lists. */ + JSAMPIMAGE xbuffer[2]; /* pointers to weird pointer lists */ + + int whichptr; /* indicates which pointer set is now in use */ + int context_state; /* process_data state machine status */ + JDIMENSION rowgroups_avail; /* row groups available to postprocessor */ + JDIMENSION iMCU_row_ctr; /* counts iMCU rows to detect image top/bot */ +} my_main_controller; + +typedef my_main_controller * my_main_ptr; + +/* context_state values: */ +#define CTX_PREPARE_FOR_IMCU 0 /* need to prepare for MCU row */ +#define CTX_PROCESS_IMCU 1 /* feeding iMCU to postprocessor */ +#define CTX_POSTPONED_ROW 2 /* feeding postponed row group */ + + +/* Forward declarations */ +METHODDEF(void) process_data_simple_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +METHODDEF(void) process_data_context_main + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) process_data_crank_post + JPP((j_decompress_ptr cinfo, JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, JDIMENSION out_rows_avail)); +#endif + + +LOCAL(void) +alloc_funny_pointers (j_decompress_ptr cinfo) +/* Allocate space for the funny pointer lists. + * This is done only once, not once per pass. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + /* Get top-level space for component array pointers. + * We alloc both arrays with one call to save a few cycles. + */ + main->xbuffer[0] = (JSAMPIMAGE) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * 2 * SIZEOF(JSAMPARRAY)); + main->xbuffer[1] = main->xbuffer[0] + cinfo->num_components; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + /* Get space for pointer lists --- M+4 row groups in each list. + * We alloc both pointer lists with one call to save a few cycles. + */ + xbuf = (JSAMPARRAY) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + 2 * (rgroup * (M + 4)) * SIZEOF(JSAMPROW)); + xbuf += rgroup; /* want one row group at negative offsets */ + main->xbuffer[0][ci] = xbuf; + xbuf += rgroup * (M + 4); + main->xbuffer[1][ci] = xbuf; + } +} + + +LOCAL(void) +make_funny_pointers (j_decompress_ptr cinfo) +/* Create the funny pointer lists discussed in the comments above. + * The actual workspace is already allocated (in main->buffer), + * and the space for the pointer lists is allocated too. + * This routine just fills in the curiously ordered lists. + * This will be repeated at the beginning of each pass. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY buf, xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = main->xbuffer[0][ci]; + xbuf1 = main->xbuffer[1][ci]; + /* First copy the workspace pointers as-is */ + buf = main->buffer[ci]; + for (i = 0; i < rgroup * (M + 2); i++) { + xbuf0[i] = xbuf1[i] = buf[i]; + } + /* In the second list, put the last four row groups in swapped order */ + for (i = 0; i < rgroup * 2; i++) { + xbuf1[rgroup*(M-2) + i] = buf[rgroup*M + i]; + xbuf1[rgroup*M + i] = buf[rgroup*(M-2) + i]; + } + /* The wraparound pointers at top and bottom will be filled later + * (see set_wraparound_pointers, below). Initially we want the "above" + * pointers to duplicate the first actual data line. This only needs + * to happen in xbuffer[0]. + */ + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[0]; + } + } +} + + +LOCAL(void) +set_wraparound_pointers (j_decompress_ptr cinfo) +/* Set up the "wraparound" pointers at top and bottom of the pointer lists. + * This changes the pointer list state from top-of-image to the normal state. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup; + int M = cinfo->min_DCT_v_scaled_size; + jpeg_component_info *compptr; + JSAMPARRAY xbuf0, xbuf1; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + xbuf0 = main->xbuffer[0][ci]; + xbuf1 = main->xbuffer[1][ci]; + for (i = 0; i < rgroup; i++) { + xbuf0[i - rgroup] = xbuf0[rgroup*(M+1) + i]; + xbuf1[i - rgroup] = xbuf1[rgroup*(M+1) + i]; + xbuf0[rgroup*(M+2) + i] = xbuf0[i]; + xbuf1[rgroup*(M+2) + i] = xbuf1[i]; + } + } +} + + +LOCAL(void) +set_bottom_pointers (j_decompress_ptr cinfo) +/* Change the pointer lists to duplicate the last sample row at the bottom + * of the image. whichptr indicates which xbuffer holds the final iMCU row. + * Also sets rowgroups_avail to indicate number of nondummy row groups in row. + */ +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + int ci, i, rgroup, iMCUheight, rows_left; + jpeg_component_info *compptr; + JSAMPARRAY xbuf; + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Count sample rows in one iMCU row and in one row group */ + iMCUheight = compptr->v_samp_factor * compptr->DCT_v_scaled_size; + rgroup = iMCUheight / cinfo->min_DCT_v_scaled_size; + /* Count nondummy sample rows remaining for this component */ + rows_left = (int) (compptr->downsampled_height % (JDIMENSION) iMCUheight); + if (rows_left == 0) rows_left = iMCUheight; + /* Count nondummy row groups. Should get same answer for each component, + * so we need only do it once. + */ + if (ci == 0) { + main->rowgroups_avail = (JDIMENSION) ((rows_left-1) / rgroup + 1); + } + /* Duplicate the last real sample row rgroup*2 times; this pads out the + * last partial rowgroup and ensures at least one full rowgroup of context. + */ + xbuf = main->xbuffer[main->whichptr][ci]; + for (i = 0; i < rgroup * 2; i++) { + xbuf[rows_left + i] = xbuf[rows_left-1]; + } + } +} + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_main (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->upsample->need_context_rows) { + main->pub.process_data = process_data_context_main; + make_funny_pointers(cinfo); /* Create the xbuffer[] lists */ + main->whichptr = 0; /* Read first iMCU row into xbuffer[0] */ + main->context_state = CTX_PREPARE_FOR_IMCU; + main->iMCU_row_ctr = 0; + } else { + /* Simple case with no context needed */ + main->pub.process_data = process_data_simple_main; + } + main->buffer_full = FALSE; /* Mark buffer empty */ + main->rowgroup_ctr = 0; + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_CRANK_DEST: + /* For last pass of 2-pass quantization, just crank the postprocessor */ + main->pub.process_data = process_data_crank_post; + break; +#endif + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } +} + + +/* + * Process some data. + * This handles the simple case where no context is required. + */ + +METHODDEF(void) +process_data_simple_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + JDIMENSION rowgroups_avail; + + /* Read input data if we haven't filled the main buffer yet */ + if (! main->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, main->buffer)) + return; /* suspension forced, can do nothing more */ + main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + } + + /* There are always min_DCT_scaled_size row groups in an iMCU row. */ + rowgroups_avail = (JDIMENSION) cinfo->min_DCT_v_scaled_size; + /* Note: at the bottom of the image, we may pass extra garbage row groups + * to the postprocessor. The postprocessor has to check for bottom + * of image anyway (at row resolution), so no point in us doing it too. + */ + + /* Feed the postprocessor */ + (*cinfo->post->post_process_data) (cinfo, main->buffer, + &main->rowgroup_ctr, rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + + /* Has postprocessor consumed all the data yet? If so, mark buffer empty */ + if (main->rowgroup_ctr >= rowgroups_avail) { + main->buffer_full = FALSE; + main->rowgroup_ctr = 0; + } +} + + +/* + * Process some data. + * This handles the case where context rows must be provided. + */ + +METHODDEF(void) +process_data_context_main (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_main_ptr main = (my_main_ptr) cinfo->main; + + /* Read input data if we haven't filled the main buffer yet */ + if (! main->buffer_full) { + if (! (*cinfo->coef->decompress_data) (cinfo, + main->xbuffer[main->whichptr])) + return; /* suspension forced, can do nothing more */ + main->buffer_full = TRUE; /* OK, we have an iMCU row to work with */ + main->iMCU_row_ctr++; /* count rows received */ + } + + /* Postprocessor typically will not swallow all the input data it is handed + * in one call (due to filling the output buffer first). Must be prepared + * to exit and restart. This switch lets us keep track of how far we got. + * Note that each case falls through to the next on successful completion. + */ + switch (main->context_state) { + case CTX_POSTPONED_ROW: + /* Call postprocessor using previously set pointers for postponed row */ + (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], + &main->rowgroup_ctr, main->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (main->rowgroup_ctr < main->rowgroups_avail) + return; /* Need to suspend */ + main->context_state = CTX_PREPARE_FOR_IMCU; + if (*out_row_ctr >= out_rows_avail) + return; /* Postprocessor exactly filled output buf */ + /*FALLTHROUGH*/ + case CTX_PREPARE_FOR_IMCU: + /* Prepare to process first M-1 row groups of this iMCU row */ + main->rowgroup_ctr = 0; + main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size - 1); + /* Check for bottom of image: if so, tweak pointers to "duplicate" + * the last sample row, and adjust rowgroups_avail to ignore padding rows. + */ + if (main->iMCU_row_ctr == cinfo->total_iMCU_rows) + set_bottom_pointers(cinfo); + main->context_state = CTX_PROCESS_IMCU; + /*FALLTHROUGH*/ + case CTX_PROCESS_IMCU: + /* Call postprocessor using previously set pointers */ + (*cinfo->post->post_process_data) (cinfo, main->xbuffer[main->whichptr], + &main->rowgroup_ctr, main->rowgroups_avail, + output_buf, out_row_ctr, out_rows_avail); + if (main->rowgroup_ctr < main->rowgroups_avail) + return; /* Need to suspend */ + /* After the first iMCU, change wraparound pointers to normal state */ + if (main->iMCU_row_ctr == 1) + set_wraparound_pointers(cinfo); + /* Prepare to load new iMCU row using other xbuffer list */ + main->whichptr ^= 1; /* 0=>1 or 1=>0 */ + main->buffer_full = FALSE; + /* Still need to process last row group of this iMCU row, */ + /* which is saved at index M+1 of the other xbuffer */ + main->rowgroup_ctr = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 1); + main->rowgroups_avail = (JDIMENSION) (cinfo->min_DCT_v_scaled_size + 2); + main->context_state = CTX_POSTPONED_ROW; + } +} + + +/* + * Process some data. + * Final pass of two-pass quantization: just call the postprocessor. + * Source data will be the postprocessor controller's internal buffer. + */ + +#ifdef QUANT_2PASS_SUPPORTED + +METHODDEF(void) +process_data_crank_post (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + (*cinfo->post->post_process_data) (cinfo, (JSAMPIMAGE) NULL, + (JDIMENSION *) NULL, (JDIMENSION) 0, + output_buf, out_row_ctr, out_rows_avail); +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize main buffer controller. + */ + +GLOBAL(void) +jinit_d_main_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_main_ptr main; + int ci, rgroup, ngroups; + jpeg_component_info *compptr; + + main = (my_main_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_main_controller)); + cinfo->main = (struct jpeg_d_main_controller *) main; + main->pub.start_pass = start_pass_main; + + if (need_full_buffer) /* shouldn't happen */ + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + + /* Allocate the workspace. + * ngroups is the number of row groups we need. + */ + if (cinfo->upsample->need_context_rows) { + if (cinfo->min_DCT_v_scaled_size < 2) /* unsupported, see comments above */ + ERREXIT(cinfo, JERR_NOTIMPL); + alloc_funny_pointers(cinfo); /* Alloc space for xbuffer[] lists */ + ngroups = cinfo->min_DCT_v_scaled_size + 2; + } else { + ngroups = cinfo->min_DCT_v_scaled_size; + } + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + rgroup = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; /* height of a row group of component */ + main->buffer[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + compptr->width_in_blocks * compptr->DCT_h_scaled_size, + (JDIMENSION) (rgroup * ngroups)); + } +} diff --git a/src/3rdparty/libjpeg/jdmarker.c b/src/3rdparty/libjpeg/jdmarker.c new file mode 100644 index 0000000..f2a9cc4 --- /dev/null +++ b/src/3rdparty/libjpeg/jdmarker.c @@ -0,0 +1,1406 @@ +/* + * jdmarker.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains routines to decode JPEG datastream markers. + * Most of the complexity arises from our desire to support input + * suspension: if not all of the data for a marker is available, + * we must exit back to the application. On resumption, we reprocess + * the marker. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +typedef enum { /* JPEG marker codes */ + M_SOF0 = 0xc0, + M_SOF1 = 0xc1, + M_SOF2 = 0xc2, + M_SOF3 = 0xc3, + + M_SOF5 = 0xc5, + M_SOF6 = 0xc6, + M_SOF7 = 0xc7, + + M_JPG = 0xc8, + M_SOF9 = 0xc9, + M_SOF10 = 0xca, + M_SOF11 = 0xcb, + + M_SOF13 = 0xcd, + M_SOF14 = 0xce, + M_SOF15 = 0xcf, + + M_DHT = 0xc4, + + M_DAC = 0xcc, + + M_RST0 = 0xd0, + M_RST1 = 0xd1, + M_RST2 = 0xd2, + M_RST3 = 0xd3, + M_RST4 = 0xd4, + M_RST5 = 0xd5, + M_RST6 = 0xd6, + M_RST7 = 0xd7, + + M_SOI = 0xd8, + M_EOI = 0xd9, + M_SOS = 0xda, + M_DQT = 0xdb, + M_DNL = 0xdc, + M_DRI = 0xdd, + M_DHP = 0xde, + M_EXP = 0xdf, + + M_APP0 = 0xe0, + M_APP1 = 0xe1, + M_APP2 = 0xe2, + M_APP3 = 0xe3, + M_APP4 = 0xe4, + M_APP5 = 0xe5, + M_APP6 = 0xe6, + M_APP7 = 0xe7, + M_APP8 = 0xe8, + M_APP9 = 0xe9, + M_APP10 = 0xea, + M_APP11 = 0xeb, + M_APP12 = 0xec, + M_APP13 = 0xed, + M_APP14 = 0xee, + M_APP15 = 0xef, + + M_JPG0 = 0xf0, + M_JPG13 = 0xfd, + M_COM = 0xfe, + + M_TEM = 0x01, + + M_ERROR = 0x100 +} JPEG_MARKER; + + +/* Private state */ + +typedef struct { + struct jpeg_marker_reader pub; /* public fields */ + + /* Application-overridable marker processing methods */ + jpeg_marker_parser_method process_COM; + jpeg_marker_parser_method process_APPn[16]; + + /* Limit on marker data length to save for each marker type */ + unsigned int length_limit_COM; + unsigned int length_limit_APPn[16]; + + /* Status of COM/APPn marker saving */ + jpeg_saved_marker_ptr cur_marker; /* NULL if not processing a marker */ + unsigned int bytes_read; /* data bytes read so far in marker */ + /* Note: cur_marker is not linked into marker_list until it's all read. */ +} my_marker_reader; + +typedef my_marker_reader * my_marker_ptr; + + +/* + * Macros for fetching data from the data source module. + * + * At all times, cinfo->src->next_input_byte and ->bytes_in_buffer reflect + * the current restart point; we update them only when we have reached a + * suitable place to restart if a suspension occurs. + */ + +/* Declare and initialize local copies of input pointer/count */ +#define INPUT_VARS(cinfo) \ + struct jpeg_source_mgr * datasrc = (cinfo)->src; \ + const JOCTET * next_input_byte = datasrc->next_input_byte; \ + size_t bytes_in_buffer = datasrc->bytes_in_buffer + +/* Unload the local copies --- do this only at a restart boundary */ +#define INPUT_SYNC(cinfo) \ + ( datasrc->next_input_byte = next_input_byte, \ + datasrc->bytes_in_buffer = bytes_in_buffer ) + +/* Reload the local copies --- used only in MAKE_BYTE_AVAIL */ +#define INPUT_RELOAD(cinfo) \ + ( next_input_byte = datasrc->next_input_byte, \ + bytes_in_buffer = datasrc->bytes_in_buffer ) + +/* Internal macro for INPUT_BYTE and INPUT_2BYTES: make a byte available. + * Note we do *not* do INPUT_SYNC before calling fill_input_buffer, + * but we must reload the local copies after a successful fill. + */ +#define MAKE_BYTE_AVAIL(cinfo,action) \ + if (bytes_in_buffer == 0) { \ + if (! (*datasrc->fill_input_buffer) (cinfo)) \ + { action; } \ + INPUT_RELOAD(cinfo); \ + } + +/* Read a byte into variable V. + * If must suspend, take the specified action (typically "return FALSE"). + */ +#define INPUT_BYTE(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = GETJOCTET(*next_input_byte++); ) + +/* As above, but read two bytes interpreted as an unsigned 16-bit integer. + * V should be declared unsigned int or perhaps INT32. + */ +#define INPUT_2BYTES(cinfo,V,action) \ + MAKESTMT( MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V = ((unsigned int) GETJOCTET(*next_input_byte++)) << 8; \ + MAKE_BYTE_AVAIL(cinfo,action); \ + bytes_in_buffer--; \ + V += GETJOCTET(*next_input_byte++); ) + + +/* + * Routines to process JPEG markers. + * + * Entry condition: JPEG marker itself has been read and its code saved + * in cinfo->unread_marker; input restart point is just after the marker. + * + * Exit: if return TRUE, have read and processed any parameters, and have + * updated the restart point to point after the parameters. + * If return FALSE, was forced to suspend before reaching end of + * marker parameters; restart point has not been moved. Same routine + * will be called again after application supplies more input data. + * + * This approach to suspension assumes that all of a marker's parameters + * can fit into a single input bufferload. This should hold for "normal" + * markers. Some COM/APPn markers might have large parameter segments + * that might not fit. If we are simply dropping such a marker, we use + * skip_input_data to get past it, and thereby put the problem on the + * source manager's shoulders. If we are saving the marker's contents + * into memory, we use a slightly different convention: when forced to + * suspend, the marker processor updates the restart point to the end of + * what it's consumed (ie, the end of the buffer) before returning FALSE. + * On resumption, cinfo->unread_marker still contains the marker code, + * but the data source will point to the next chunk of marker data. + * The marker processor must retain internal state to deal with this. + * + * Note that we don't bother to avoid duplicate trace messages if a + * suspension occurs within marker parameters. Other side effects + * require more care. + */ + + +LOCAL(boolean) +get_soi (j_decompress_ptr cinfo) +/* Process an SOI marker */ +{ + int i; + + TRACEMS(cinfo, 1, JTRC_SOI); + + if (cinfo->marker->saw_SOI) + ERREXIT(cinfo, JERR_SOI_DUPLICATE); + + /* Reset all parameters that are defined to be reset by SOI */ + + for (i = 0; i < NUM_ARITH_TBLS; i++) { + cinfo->arith_dc_L[i] = 0; + cinfo->arith_dc_U[i] = 1; + cinfo->arith_ac_K[i] = 5; + } + cinfo->restart_interval = 0; + + /* Set initial assumptions for colorspace etc */ + + cinfo->jpeg_color_space = JCS_UNKNOWN; + cinfo->CCIR601_sampling = FALSE; /* Assume non-CCIR sampling??? */ + + cinfo->saw_JFIF_marker = FALSE; + cinfo->JFIF_major_version = 1; /* set default JFIF APP0 values */ + cinfo->JFIF_minor_version = 1; + cinfo->density_unit = 0; + cinfo->X_density = 1; + cinfo->Y_density = 1; + cinfo->saw_Adobe_marker = FALSE; + cinfo->Adobe_transform = 0; + + cinfo->marker->saw_SOI = TRUE; + + return TRUE; +} + + +LOCAL(boolean) +get_sof (j_decompress_ptr cinfo, boolean is_baseline, boolean is_prog, + boolean is_arith) +/* Process a SOFn marker */ +{ + INT32 length; + int c, ci; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + cinfo->is_baseline = is_baseline; + cinfo->progressive_mode = is_prog; + cinfo->arith_code = is_arith; + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, cinfo->data_precision, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_height, return FALSE); + INPUT_2BYTES(cinfo, cinfo->image_width, return FALSE); + INPUT_BYTE(cinfo, cinfo->num_components, return FALSE); + + length -= 8; + + TRACEMS4(cinfo, 1, JTRC_SOF, cinfo->unread_marker, + (int) cinfo->image_width, (int) cinfo->image_height, + cinfo->num_components); + + if (cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOF_DUPLICATE); + + /* We don't support files in which the image height is initially specified */ + /* as 0 and is later redefined by DNL. As long as we have to check that, */ + /* might as well have a general sanity check. */ + if (cinfo->image_height <= 0 || cinfo->image_width <= 0 + || cinfo->num_components <= 0) + ERREXIT(cinfo, JERR_EMPTY_IMAGE); + + if (length != (cinfo->num_components * 3)) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + if (cinfo->comp_info == NULL) /* do only once, even if suspend */ + cinfo->comp_info = (jpeg_component_info *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->num_components * SIZEOF(jpeg_component_info)); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + compptr->component_index = ci; + INPUT_BYTE(cinfo, compptr->component_id, return FALSE); + INPUT_BYTE(cinfo, c, return FALSE); + compptr->h_samp_factor = (c >> 4) & 15; + compptr->v_samp_factor = (c ) & 15; + INPUT_BYTE(cinfo, compptr->quant_tbl_no, return FALSE); + + TRACEMS4(cinfo, 1, JTRC_SOF_COMPONENT, + compptr->component_id, compptr->h_samp_factor, + compptr->v_samp_factor, compptr->quant_tbl_no); + } + + cinfo->marker->saw_SOF = TRUE; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_sos (j_decompress_ptr cinfo) +/* Process a SOS marker */ +{ + INT32 length; + int i, ci, n, c, cc; + jpeg_component_info * compptr; + INPUT_VARS(cinfo); + + if (! cinfo->marker->saw_SOF) + ERREXIT(cinfo, JERR_SOS_NO_SOF); + + INPUT_2BYTES(cinfo, length, return FALSE); + + INPUT_BYTE(cinfo, n, return FALSE); /* Number of components */ + + TRACEMS1(cinfo, 1, JTRC_SOS, n); + + if (length != (n * 2 + 6) || n > MAX_COMPS_IN_SCAN || + (n == 0 && !cinfo->progressive_mode)) + /* pseudo SOS marker only allowed in progressive mode */ + ERREXIT(cinfo, JERR_BAD_LENGTH); + + cinfo->comps_in_scan = n; + + /* Collect the component-spec parameters */ + + for (i = 0; i < n; i++) { + INPUT_BYTE(cinfo, cc, return FALSE); + INPUT_BYTE(cinfo, c, return FALSE); + + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + if (cc == compptr->component_id) + goto id_found; + } + + ERREXIT1(cinfo, JERR_BAD_COMPONENT_ID, cc); + + id_found: + + cinfo->cur_comp_info[i] = compptr; + compptr->dc_tbl_no = (c >> 4) & 15; + compptr->ac_tbl_no = (c ) & 15; + + TRACEMS3(cinfo, 1, JTRC_SOS_COMPONENT, cc, + compptr->dc_tbl_no, compptr->ac_tbl_no); + } + + /* Collect the additional scan parameters Ss, Se, Ah/Al. */ + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ss = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Se = c; + INPUT_BYTE(cinfo, c, return FALSE); + cinfo->Ah = (c >> 4) & 15; + cinfo->Al = (c ) & 15; + + TRACEMS4(cinfo, 1, JTRC_SOS_PARAMS, cinfo->Ss, cinfo->Se, + cinfo->Ah, cinfo->Al); + + /* Prepare to scan data & restart markers */ + cinfo->marker->next_restart_num = 0; + + /* Count another (non-pseudo) SOS marker */ + if (n) cinfo->input_scan_number++; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +#ifdef D_ARITH_CODING_SUPPORTED + +LOCAL(boolean) +get_dac (j_decompress_ptr cinfo) +/* Process a DAC marker */ +{ + INT32 length; + int index, val; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + INPUT_BYTE(cinfo, index, return FALSE); + INPUT_BYTE(cinfo, val, return FALSE); + + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_DAC, index, val); + + if (index < 0 || index >= (2*NUM_ARITH_TBLS)) + ERREXIT1(cinfo, JERR_DAC_INDEX, index); + + if (index >= NUM_ARITH_TBLS) { /* define AC table */ + cinfo->arith_ac_K[index-NUM_ARITH_TBLS] = (UINT8) val; + } else { /* define DC table */ + cinfo->arith_dc_L[index] = (UINT8) (val & 0x0F); + cinfo->arith_dc_U[index] = (UINT8) (val >> 4); + if (cinfo->arith_dc_L[index] > cinfo->arith_dc_U[index]) + ERREXIT1(cinfo, JERR_DAC_VALUE, val); + } + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + +#else /* ! D_ARITH_CODING_SUPPORTED */ + +#define get_dac(cinfo) skip_variable(cinfo) + +#endif /* D_ARITH_CODING_SUPPORTED */ + + +LOCAL(boolean) +get_dht (j_decompress_ptr cinfo) +/* Process a DHT marker */ +{ + INT32 length; + UINT8 bits[17]; + UINT8 huffval[256]; + int i, index, count; + JHUFF_TBL **htblptr; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 16) { + INPUT_BYTE(cinfo, index, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DHT, index); + + bits[0] = 0; + count = 0; + for (i = 1; i <= 16; i++) { + INPUT_BYTE(cinfo, bits[i], return FALSE); + count += bits[i]; + } + + length -= 1 + 16; + + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[1], bits[2], bits[3], bits[4], + bits[5], bits[6], bits[7], bits[8]); + TRACEMS8(cinfo, 2, JTRC_HUFFBITS, + bits[9], bits[10], bits[11], bits[12], + bits[13], bits[14], bits[15], bits[16]); + + /* Here we just do minimal validation of the counts to avoid walking + * off the end of our table space. jdhuff.c will check more carefully. + */ + if (count > 256 || ((INT32) count) > length) + ERREXIT(cinfo, JERR_BAD_HUFF_TABLE); + + for (i = 0; i < count; i++) + INPUT_BYTE(cinfo, huffval[i], return FALSE); + + length -= count; + + if (index & 0x10) { /* AC table definition */ + index -= 0x10; + htblptr = &cinfo->ac_huff_tbl_ptrs[index]; + } else { /* DC table definition */ + htblptr = &cinfo->dc_huff_tbl_ptrs[index]; + } + + if (index < 0 || index >= NUM_HUFF_TBLS) + ERREXIT1(cinfo, JERR_DHT_INDEX, index); + + if (*htblptr == NULL) + *htblptr = jpeg_alloc_huff_table((j_common_ptr) cinfo); + + MEMCOPY((*htblptr)->bits, bits, SIZEOF((*htblptr)->bits)); + MEMCOPY((*htblptr)->huffval, huffval, SIZEOF((*htblptr)->huffval)); + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dqt (j_decompress_ptr cinfo) +/* Process a DQT marker */ +{ + INT32 length, count, i; + int n, prec; + unsigned int tmp; + JQUANT_TBL *quant_ptr; + const int *natural_order; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + while (length > 0) { + length--; + INPUT_BYTE(cinfo, n, return FALSE); + prec = n >> 4; + n &= 0x0F; + + TRACEMS2(cinfo, 1, JTRC_DQT, n, prec); + + if (n >= NUM_QUANT_TBLS) + ERREXIT1(cinfo, JERR_DQT_INDEX, n); + + if (cinfo->quant_tbl_ptrs[n] == NULL) + cinfo->quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) cinfo); + quant_ptr = cinfo->quant_tbl_ptrs[n]; + + if (prec) { + if (length < DCTSIZE2 * 2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length >> 1; + } else + count = DCTSIZE2; + } else { + if (length < DCTSIZE2) { + /* Initialize full table for safety. */ + for (i = 0; i < DCTSIZE2; i++) { + quant_ptr->quantval[i] = 1; + } + count = length; + } else + count = DCTSIZE2; + } + + switch (count) { + case (2*2): natural_order = jpeg_natural_order2; break; + case (3*3): natural_order = jpeg_natural_order3; break; + case (4*4): natural_order = jpeg_natural_order4; break; + case (5*5): natural_order = jpeg_natural_order5; break; + case (6*6): natural_order = jpeg_natural_order6; break; + case (7*7): natural_order = jpeg_natural_order7; break; + default: natural_order = jpeg_natural_order; break; + } + + for (i = 0; i < count; i++) { + if (prec) + INPUT_2BYTES(cinfo, tmp, return FALSE); + else + INPUT_BYTE(cinfo, tmp, return FALSE); + /* We convert the zigzag-order table to natural array order. */ + quant_ptr->quantval[natural_order[i]] = (UINT16) tmp; + } + + if (cinfo->err->trace_level >= 2) { + for (i = 0; i < DCTSIZE2; i += 8) { + TRACEMS8(cinfo, 2, JTRC_QUANTVALS, + quant_ptr->quantval[i], quant_ptr->quantval[i+1], + quant_ptr->quantval[i+2], quant_ptr->quantval[i+3], + quant_ptr->quantval[i+4], quant_ptr->quantval[i+5], + quant_ptr->quantval[i+6], quant_ptr->quantval[i+7]); + } + } + + length -= count; + if (prec) length -= count; + } + + if (length != 0) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +get_dri (j_decompress_ptr cinfo) +/* Process a DRI marker */ +{ + INT32 length; + unsigned int tmp; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + + if (length != 4) + ERREXIT(cinfo, JERR_BAD_LENGTH); + + INPUT_2BYTES(cinfo, tmp, return FALSE); + + TRACEMS1(cinfo, 1, JTRC_DRI, tmp); + + cinfo->restart_interval = tmp; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Routines for processing APPn and COM markers. + * These are either saved in memory or discarded, per application request. + * APP0 and APP14 are specially checked to see if they are + * JFIF and Adobe markers, respectively. + */ + +#define APP0_DATA_LEN 14 /* Length of interesting data in APP0 */ +#define APP14_DATA_LEN 12 /* Length of interesting data in APP14 */ +#define APPN_DATA_LEN 14 /* Must be the largest of the above!! */ + + +LOCAL(void) +examine_app0 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP0. + * Take appropriate action if it is a JFIF marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + INT32 totallen = (INT32) datalen + remaining; + + if (datalen >= APP0_DATA_LEN && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x49 && + GETJOCTET(data[3]) == 0x46 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF APP0 marker: save info */ + cinfo->saw_JFIF_marker = TRUE; + cinfo->JFIF_major_version = GETJOCTET(data[5]); + cinfo->JFIF_minor_version = GETJOCTET(data[6]); + cinfo->density_unit = GETJOCTET(data[7]); + cinfo->X_density = (GETJOCTET(data[8]) << 8) + GETJOCTET(data[9]); + cinfo->Y_density = (GETJOCTET(data[10]) << 8) + GETJOCTET(data[11]); + /* Check version. + * Major version must be 1, anything else signals an incompatible change. + * (We used to treat this as an error, but now it's a nonfatal warning, + * because some bozo at Hijaak couldn't read the spec.) + * Minor version should be 0..2, but process anyway if newer. + */ + if (cinfo->JFIF_major_version != 1) + WARNMS2(cinfo, JWRN_JFIF_MAJOR, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version); + /* Generate trace messages */ + TRACEMS5(cinfo, 1, JTRC_JFIF, + cinfo->JFIF_major_version, cinfo->JFIF_minor_version, + cinfo->X_density, cinfo->Y_density, cinfo->density_unit); + /* Validate thumbnail dimensions and issue appropriate messages */ + if (GETJOCTET(data[12]) | GETJOCTET(data[13])) + TRACEMS2(cinfo, 1, JTRC_JFIF_THUMBNAIL, + GETJOCTET(data[12]), GETJOCTET(data[13])); + totallen -= APP0_DATA_LEN; + if (totallen != + ((INT32)GETJOCTET(data[12]) * (INT32)GETJOCTET(data[13]) * (INT32) 3)) + TRACEMS1(cinfo, 1, JTRC_JFIF_BADTHUMBNAILSIZE, (int) totallen); + } else if (datalen >= 6 && + GETJOCTET(data[0]) == 0x4A && + GETJOCTET(data[1]) == 0x46 && + GETJOCTET(data[2]) == 0x58 && + GETJOCTET(data[3]) == 0x58 && + GETJOCTET(data[4]) == 0) { + /* Found JFIF "JFXX" extension APP0 marker */ + /* The library doesn't actually do anything with these, + * but we try to produce a helpful trace message. + */ + switch (GETJOCTET(data[5])) { + case 0x10: + TRACEMS1(cinfo, 1, JTRC_THUMB_JPEG, (int) totallen); + break; + case 0x11: + TRACEMS1(cinfo, 1, JTRC_THUMB_PALETTE, (int) totallen); + break; + case 0x13: + TRACEMS1(cinfo, 1, JTRC_THUMB_RGB, (int) totallen); + break; + default: + TRACEMS2(cinfo, 1, JTRC_JFIF_EXTENSION, + GETJOCTET(data[5]), (int) totallen); + break; + } + } else { + /* Start of APP0 does not match "JFIF" or "JFXX", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP0, (int) totallen); + } +} + + +LOCAL(void) +examine_app14 (j_decompress_ptr cinfo, JOCTET FAR * data, + unsigned int datalen, INT32 remaining) +/* Examine first few bytes from an APP14. + * Take appropriate action if it is an Adobe marker. + * datalen is # of bytes at data[], remaining is length of rest of marker data. + */ +{ + unsigned int version, flags0, flags1, transform; + + if (datalen >= APP14_DATA_LEN && + GETJOCTET(data[0]) == 0x41 && + GETJOCTET(data[1]) == 0x64 && + GETJOCTET(data[2]) == 0x6F && + GETJOCTET(data[3]) == 0x62 && + GETJOCTET(data[4]) == 0x65) { + /* Found Adobe APP14 marker */ + version = (GETJOCTET(data[5]) << 8) + GETJOCTET(data[6]); + flags0 = (GETJOCTET(data[7]) << 8) + GETJOCTET(data[8]); + flags1 = (GETJOCTET(data[9]) << 8) + GETJOCTET(data[10]); + transform = GETJOCTET(data[11]); + TRACEMS4(cinfo, 1, JTRC_ADOBE, version, flags0, flags1, transform); + cinfo->saw_Adobe_marker = TRUE; + cinfo->Adobe_transform = (UINT8) transform; + } else { + /* Start of APP14 does not match "Adobe", or too short */ + TRACEMS1(cinfo, 1, JTRC_APP14, (int) (datalen + remaining)); + } +} + + +METHODDEF(boolean) +get_interesting_appn (j_decompress_ptr cinfo) +/* Process an APP0 or APP14 marker without saving it */ +{ + INT32 length; + JOCTET b[APPN_DATA_LEN]; + unsigned int i, numtoread; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + /* get the interesting part of the marker data */ + if (length >= APPN_DATA_LEN) + numtoread = APPN_DATA_LEN; + else if (length > 0) + numtoread = (unsigned int) length; + else + numtoread = 0; + for (i = 0; i < numtoread; i++) + INPUT_BYTE(cinfo, b[i], return FALSE); + length -= numtoread; + + /* process it */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + case M_APP14: + examine_app14(cinfo, (JOCTET FAR *) b, numtoread, length); + break; + default: + /* can't get here unless jpeg_save_markers chooses wrong processor */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +#ifdef SAVE_MARKERS_SUPPORTED + +METHODDEF(boolean) +save_marker (j_decompress_ptr cinfo) +/* Save an APPn or COM marker into the marker list */ +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + jpeg_saved_marker_ptr cur_marker = marker->cur_marker; + unsigned int bytes_read, data_length; + JOCTET FAR * data; + INT32 length = 0; + INPUT_VARS(cinfo); + + if (cur_marker == NULL) { + /* begin reading a marker */ + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + if (length >= 0) { /* watch out for bogus length word */ + /* figure out how much we want to save */ + unsigned int limit; + if (cinfo->unread_marker == (int) M_COM) + limit = marker->length_limit_COM; + else + limit = marker->length_limit_APPn[cinfo->unread_marker - (int) M_APP0]; + if ((unsigned int) length < limit) + limit = (unsigned int) length; + /* allocate and initialize the marker item */ + cur_marker = (jpeg_saved_marker_ptr) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(struct jpeg_marker_struct) + limit); + cur_marker->next = NULL; + cur_marker->marker = (UINT8) cinfo->unread_marker; + cur_marker->original_length = (unsigned int) length; + cur_marker->data_length = limit; + /* data area is just beyond the jpeg_marker_struct */ + data = cur_marker->data = (JOCTET FAR *) (cur_marker + 1); + marker->cur_marker = cur_marker; + marker->bytes_read = 0; + bytes_read = 0; + data_length = limit; + } else { + /* deal with bogus length word */ + bytes_read = data_length = 0; + data = NULL; + } + } else { + /* resume reading a marker */ + bytes_read = marker->bytes_read; + data_length = cur_marker->data_length; + data = cur_marker->data + bytes_read; + } + + while (bytes_read < data_length) { + INPUT_SYNC(cinfo); /* move the restart point to here */ + marker->bytes_read = bytes_read; + /* If there's not at least one byte in buffer, suspend */ + MAKE_BYTE_AVAIL(cinfo, return FALSE); + /* Copy bytes with reasonable rapidity */ + while (bytes_read < data_length && bytes_in_buffer > 0) { + *data++ = *next_input_byte++; + bytes_in_buffer--; + bytes_read++; + } + } + + /* Done reading what we want to read */ + if (cur_marker != NULL) { /* will be NULL if bogus length word */ + /* Add new marker to end of list */ + if (cinfo->marker_list == NULL) { + cinfo->marker_list = cur_marker; + } else { + jpeg_saved_marker_ptr prev = cinfo->marker_list; + while (prev->next != NULL) + prev = prev->next; + prev->next = cur_marker; + } + /* Reset pointer & calc remaining data length */ + data = cur_marker->data; + length = cur_marker->original_length - data_length; + } + /* Reset to initial state for next marker */ + marker->cur_marker = NULL; + + /* Process the marker if interesting; else just make a generic trace msg */ + switch (cinfo->unread_marker) { + case M_APP0: + examine_app0(cinfo, data, data_length, length); + break; + case M_APP14: + examine_app14(cinfo, data, data_length, length); + break; + default: + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, + (int) (data_length + length)); + break; + } + + /* skip any remaining data -- could be lots */ + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +METHODDEF(boolean) +skip_variable (j_decompress_ptr cinfo) +/* Skip over an unknown or uninteresting variable-length marker */ +{ + INT32 length; + INPUT_VARS(cinfo); + + INPUT_2BYTES(cinfo, length, return FALSE); + length -= 2; + + TRACEMS2(cinfo, 1, JTRC_MISC_MARKER, cinfo->unread_marker, (int) length); + + INPUT_SYNC(cinfo); /* do before skip_input_data */ + if (length > 0) + (*cinfo->src->skip_input_data) (cinfo, (long) length); + + return TRUE; +} + + +/* + * Find the next JPEG marker, save it in cinfo->unread_marker. + * Returns FALSE if had to suspend before reaching a marker; + * in that case cinfo->unread_marker is unchanged. + * + * Note that the result might not be a valid marker code, + * but it will never be 0 or FF. + */ + +LOCAL(boolean) +next_marker (j_decompress_ptr cinfo) +{ + int c; + INPUT_VARS(cinfo); + + for (;;) { + INPUT_BYTE(cinfo, c, return FALSE); + /* Skip any non-FF bytes. + * This may look a bit inefficient, but it will not occur in a valid file. + * We sync after each discarded byte so that a suspending data source + * can discard the byte from its buffer. + */ + while (c != 0xFF) { + cinfo->marker->discarded_bytes++; + INPUT_SYNC(cinfo); + INPUT_BYTE(cinfo, c, return FALSE); + } + /* This loop swallows any duplicate FF bytes. Extra FFs are legal as + * pad bytes, so don't count them in discarded_bytes. We assume there + * will not be so many consecutive FF bytes as to overflow a suspending + * data source's input buffer. + */ + do { + INPUT_BYTE(cinfo, c, return FALSE); + } while (c == 0xFF); + if (c != 0) + break; /* found a valid marker, exit loop */ + /* Reach here if we found a stuffed-zero data sequence (FF/00). + * Discard it and loop back to try again. + */ + cinfo->marker->discarded_bytes += 2; + INPUT_SYNC(cinfo); + } + + if (cinfo->marker->discarded_bytes != 0) { + WARNMS2(cinfo, JWRN_EXTRANEOUS_DATA, cinfo->marker->discarded_bytes, c); + cinfo->marker->discarded_bytes = 0; + } + + cinfo->unread_marker = c; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +LOCAL(boolean) +first_marker (j_decompress_ptr cinfo) +/* Like next_marker, but used to obtain the initial SOI marker. */ +/* For this marker, we do not allow preceding garbage or fill; otherwise, + * we might well scan an entire input file before realizing it ain't JPEG. + * If an application wants to process non-JFIF files, it must seek to the + * SOI before calling the JPEG library. + */ +{ + int c, c2; + INPUT_VARS(cinfo); + + INPUT_BYTE(cinfo, c, return FALSE); + INPUT_BYTE(cinfo, c2, return FALSE); + if (c != 0xFF || c2 != (int) M_SOI) + ERREXIT2(cinfo, JERR_NO_SOI, c, c2); + + cinfo->unread_marker = c2; + + INPUT_SYNC(cinfo); + return TRUE; +} + + +/* + * Read markers until SOS or EOI. + * + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + * + * Note: This function may return a pseudo SOS marker (with zero + * component number) for treat by input controller's consume_input. + * consume_input itself should filter out (skip) the pseudo marker + * after processing for the caller. + */ + +METHODDEF(int) +read_markers (j_decompress_ptr cinfo) +{ + /* Outer loop repeats once for each marker. */ + for (;;) { + /* Collect the marker proper, unless we already did. */ + /* NB: first_marker() enforces the requirement that SOI appear first. */ + if (cinfo->unread_marker == 0) { + if (! cinfo->marker->saw_SOI) { + if (! first_marker(cinfo)) + return JPEG_SUSPENDED; + } else { + if (! next_marker(cinfo)) + return JPEG_SUSPENDED; + } + } + /* At this point cinfo->unread_marker contains the marker code and the + * input point is just past the marker proper, but before any parameters. + * A suspension will cause us to return with this state still true. + */ + switch (cinfo->unread_marker) { + case M_SOI: + if (! get_soi(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_SOF0: /* Baseline */ + if (! get_sof(cinfo, TRUE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF1: /* Extended sequential, Huffman */ + if (! get_sof(cinfo, FALSE, FALSE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF2: /* Progressive, Huffman */ + if (! get_sof(cinfo, FALSE, TRUE, FALSE)) + return JPEG_SUSPENDED; + break; + + case M_SOF9: /* Extended sequential, arithmetic */ + if (! get_sof(cinfo, FALSE, FALSE, TRUE)) + return JPEG_SUSPENDED; + break; + + case M_SOF10: /* Progressive, arithmetic */ + if (! get_sof(cinfo, FALSE, TRUE, TRUE)) + return JPEG_SUSPENDED; + break; + + /* Currently unsupported SOFn types */ + case M_SOF3: /* Lossless, Huffman */ + case M_SOF5: /* Differential sequential, Huffman */ + case M_SOF6: /* Differential progressive, Huffman */ + case M_SOF7: /* Differential lossless, Huffman */ + case M_JPG: /* Reserved for JPEG extensions */ + case M_SOF11: /* Lossless, arithmetic */ + case M_SOF13: /* Differential sequential, arithmetic */ + case M_SOF14: /* Differential progressive, arithmetic */ + case M_SOF15: /* Differential lossless, arithmetic */ + ERREXIT1(cinfo, JERR_SOF_UNSUPPORTED, cinfo->unread_marker); + break; + + case M_SOS: + if (! get_sos(cinfo)) + return JPEG_SUSPENDED; + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_SOS; + + case M_EOI: + TRACEMS(cinfo, 1, JTRC_EOI); + cinfo->unread_marker = 0; /* processed the marker */ + return JPEG_REACHED_EOI; + + case M_DAC: + if (! get_dac(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DHT: + if (! get_dht(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DQT: + if (! get_dqt(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_DRI: + if (! get_dri(cinfo)) + return JPEG_SUSPENDED; + break; + + case M_APP0: + case M_APP1: + case M_APP2: + case M_APP3: + case M_APP4: + case M_APP5: + case M_APP6: + case M_APP7: + case M_APP8: + case M_APP9: + case M_APP10: + case M_APP11: + case M_APP12: + case M_APP13: + case M_APP14: + case M_APP15: + if (! (*((my_marker_ptr) cinfo->marker)->process_APPn[ + cinfo->unread_marker - (int) M_APP0]) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_COM: + if (! (*((my_marker_ptr) cinfo->marker)->process_COM) (cinfo)) + return JPEG_SUSPENDED; + break; + + case M_RST0: /* these are all parameterless */ + case M_RST1: + case M_RST2: + case M_RST3: + case M_RST4: + case M_RST5: + case M_RST6: + case M_RST7: + case M_TEM: + TRACEMS1(cinfo, 1, JTRC_PARMLESS_MARKER, cinfo->unread_marker); + break; + + case M_DNL: /* Ignore DNL ... perhaps the wrong thing */ + if (! skip_variable(cinfo)) + return JPEG_SUSPENDED; + break; + + default: /* must be DHP, EXP, JPGn, or RESn */ + /* For now, we treat the reserved markers as fatal errors since they are + * likely to be used to signal incompatible JPEG Part 3 extensions. + * Once the JPEG 3 version-number marker is well defined, this code + * ought to change! + */ + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, cinfo->unread_marker); + break; + } + /* Successfully processed marker, so reset state variable */ + cinfo->unread_marker = 0; + } /* end loop */ +} + + +/* + * Read a restart marker, which is expected to appear next in the datastream; + * if the marker is not there, take appropriate recovery action. + * Returns FALSE if suspension is required. + * + * This is called by the entropy decoder after it has read an appropriate + * number of MCUs. cinfo->unread_marker may be nonzero if the entropy decoder + * has already read a marker from the data source. Under normal conditions + * cinfo->unread_marker will be reset to 0 before returning; if not reset, + * it holds a marker which the decoder will be unable to read past. + */ + +METHODDEF(boolean) +read_restart_marker (j_decompress_ptr cinfo) +{ + /* Obtain a marker unless we already did. */ + /* Note that next_marker will complain if it skips any data. */ + if (cinfo->unread_marker == 0) { + if (! next_marker(cinfo)) + return FALSE; + } + + if (cinfo->unread_marker == + ((int) M_RST0 + cinfo->marker->next_restart_num)) { + /* Normal case --- swallow the marker and let entropy decoder continue */ + TRACEMS1(cinfo, 3, JTRC_RST, cinfo->marker->next_restart_num); + cinfo->unread_marker = 0; + } else { + /* Uh-oh, the restart markers have been messed up. */ + /* Let the data source manager determine how to resync. */ + if (! (*cinfo->src->resync_to_restart) (cinfo, + cinfo->marker->next_restart_num)) + return FALSE; + } + + /* Update next-restart state */ + cinfo->marker->next_restart_num = (cinfo->marker->next_restart_num + 1) & 7; + + return TRUE; +} + + +/* + * This is the default resync_to_restart method for data source managers + * to use if they don't have any better approach. Some data source managers + * may be able to back up, or may have additional knowledge about the data + * which permits a more intelligent recovery strategy; such managers would + * presumably supply their own resync method. + * + * read_restart_marker calls resync_to_restart if it finds a marker other than + * the restart marker it was expecting. (This code is *not* used unless + * a nonzero restart interval has been declared.) cinfo->unread_marker is + * the marker code actually found (might be anything, except 0 or FF). + * The desired restart marker number (0..7) is passed as a parameter. + * This routine is supposed to apply whatever error recovery strategy seems + * appropriate in order to position the input stream to the next data segment. + * Note that cinfo->unread_marker is treated as a marker appearing before + * the current data-source input point; usually it should be reset to zero + * before returning. + * Returns FALSE if suspension is required. + * + * This implementation is substantially constrained by wanting to treat the + * input as a data stream; this means we can't back up. Therefore, we have + * only the following actions to work with: + * 1. Simply discard the marker and let the entropy decoder resume at next + * byte of file. + * 2. Read forward until we find another marker, discarding intervening + * data. (In theory we could look ahead within the current bufferload, + * without having to discard data if we don't find the desired marker. + * This idea is not implemented here, in part because it makes behavior + * dependent on buffer size and chance buffer-boundary positions.) + * 3. Leave the marker unread (by failing to zero cinfo->unread_marker). + * This will cause the entropy decoder to process an empty data segment, + * inserting dummy zeroes, and then we will reprocess the marker. + * + * #2 is appropriate if we think the desired marker lies ahead, while #3 is + * appropriate if the found marker is a future restart marker (indicating + * that we have missed the desired restart marker, probably because it got + * corrupted). + * We apply #2 or #3 if the found marker is a restart marker no more than + * two counts behind or ahead of the expected one. We also apply #2 if the + * found marker is not a legal JPEG marker code (it's certainly bogus data). + * If the found marker is a restart marker more than 2 counts away, we do #1 + * (too much risk that the marker is erroneous; with luck we will be able to + * resync at some future point). + * For any valid non-restart JPEG marker, we apply #3. This keeps us from + * overrunning the end of a scan. An implementation limited to single-scan + * files might find it better to apply #2 for markers other than EOI, since + * any other marker would have to be bogus data in that case. + */ + +GLOBAL(boolean) +jpeg_resync_to_restart (j_decompress_ptr cinfo, int desired) +{ + int marker = cinfo->unread_marker; + int action = 1; + + /* Always put up a warning. */ + WARNMS2(cinfo, JWRN_MUST_RESYNC, marker, desired); + + /* Outer loop handles repeated decision after scanning forward. */ + for (;;) { + if (marker < (int) M_SOF0) + action = 2; /* invalid marker */ + else if (marker < (int) M_RST0 || marker > (int) M_RST7) + action = 3; /* valid non-restart marker */ + else { + if (marker == ((int) M_RST0 + ((desired+1) & 7)) || + marker == ((int) M_RST0 + ((desired+2) & 7))) + action = 3; /* one of the next two expected restarts */ + else if (marker == ((int) M_RST0 + ((desired-1) & 7)) || + marker == ((int) M_RST0 + ((desired-2) & 7))) + action = 2; /* a prior restart, so advance */ + else + action = 1; /* desired restart or too far away */ + } + TRACEMS2(cinfo, 4, JTRC_RECOVERY_ACTION, marker, action); + switch (action) { + case 1: + /* Discard marker and let entropy decoder resume processing. */ + cinfo->unread_marker = 0; + return TRUE; + case 2: + /* Scan to the next marker, and repeat the decision loop. */ + if (! next_marker(cinfo)) + return FALSE; + marker = cinfo->unread_marker; + break; + case 3: + /* Return without advancing past this marker. */ + /* Entropy decoder will be forced to process an empty segment. */ + return TRUE; + } + } /* end loop */ +} + + +/* + * Reset marker processing state to begin a fresh datastream. + */ + +METHODDEF(void) +reset_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + cinfo->comp_info = NULL; /* until allocated by get_sof */ + cinfo->input_scan_number = 0; /* no SOS seen yet */ + cinfo->unread_marker = 0; /* no pending marker */ + marker->pub.saw_SOI = FALSE; /* set internal state too */ + marker->pub.saw_SOF = FALSE; + marker->pub.discarded_bytes = 0; + marker->cur_marker = NULL; +} + + +/* + * Initialize the marker reader module. + * This is called only once, when the decompression object is created. + */ + +GLOBAL(void) +jinit_marker_reader (j_decompress_ptr cinfo) +{ + my_marker_ptr marker; + int i; + + /* Create subobject in permanent pool */ + marker = (my_marker_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_PERMANENT, + SIZEOF(my_marker_reader)); + cinfo->marker = (struct jpeg_marker_reader *) marker; + /* Initialize public method pointers */ + marker->pub.reset_marker_reader = reset_marker_reader; + marker->pub.read_markers = read_markers; + marker->pub.read_restart_marker = read_restart_marker; + /* Initialize COM/APPn processing. + * By default, we examine and then discard APP0 and APP14, + * but simply discard COM and all other APPn. + */ + marker->process_COM = skip_variable; + marker->length_limit_COM = 0; + for (i = 0; i < 16; i++) { + marker->process_APPn[i] = skip_variable; + marker->length_limit_APPn[i] = 0; + } + marker->process_APPn[0] = get_interesting_appn; + marker->process_APPn[14] = get_interesting_appn; + /* Reset marker processing state */ + reset_marker_reader(cinfo); +} + + +/* + * Control saving of COM and APPn markers into marker_list. + */ + +#ifdef SAVE_MARKERS_SUPPORTED + +GLOBAL(void) +jpeg_save_markers (j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + long maxlength; + jpeg_marker_parser_method processor; + + /* Length limit mustn't be larger than what we can allocate + * (should only be a concern in a 16-bit environment). + */ + maxlength = cinfo->mem->max_alloc_chunk - SIZEOF(struct jpeg_marker_struct); + if (((long) length_limit) > maxlength) + length_limit = (unsigned int) maxlength; + + /* Choose processor routine to use. + * APP0/APP14 have special requirements. + */ + if (length_limit) { + processor = save_marker; + /* If saving APP0/APP14, save at least enough for our internal use. */ + if (marker_code == (int) M_APP0 && length_limit < APP0_DATA_LEN) + length_limit = APP0_DATA_LEN; + else if (marker_code == (int) M_APP14 && length_limit < APP14_DATA_LEN) + length_limit = APP14_DATA_LEN; + } else { + processor = skip_variable; + /* If discarding APP0/APP14, use our regular on-the-fly processor. */ + if (marker_code == (int) M_APP0 || marker_code == (int) M_APP14) + processor = get_interesting_appn; + } + + if (marker_code == (int) M_COM) { + marker->process_COM = processor; + marker->length_limit_COM = length_limit; + } else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) { + marker->process_APPn[marker_code - (int) M_APP0] = processor; + marker->length_limit_APPn[marker_code - (int) M_APP0] = length_limit; + } else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} + +#endif /* SAVE_MARKERS_SUPPORTED */ + + +/* + * Install a special processing method for COM or APPn markers. + */ + +GLOBAL(void) +jpeg_set_marker_processor (j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine) +{ + my_marker_ptr marker = (my_marker_ptr) cinfo->marker; + + if (marker_code == (int) M_COM) + marker->process_COM = routine; + else if (marker_code >= (int) M_APP0 && marker_code <= (int) M_APP15) + marker->process_APPn[marker_code - (int) M_APP0] = routine; + else + ERREXIT1(cinfo, JERR_UNKNOWN_MARKER, marker_code); +} diff --git a/src/3rdparty/libjpeg/jdmaster.c b/src/3rdparty/libjpeg/jdmaster.c new file mode 100644 index 0000000..8c1146e4 --- /dev/null +++ b/src/3rdparty/libjpeg/jdmaster.c @@ -0,0 +1,533 @@ +/* + * jdmaster.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 2002-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains master control logic for the JPEG decompressor. + * These routines are concerned with selecting the modules to be executed + * and with determining the number of passes and the work to be done in each + * pass. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private state */ + +typedef struct { + struct jpeg_decomp_master pub; /* public fields */ + + int pass_number; /* # of passes completed */ + + boolean using_merged_upsample; /* TRUE if using merged upsample/cconvert */ + + /* Saved references to initialized quantizer modules, + * in case we need to switch modes. + */ + struct jpeg_color_quantizer * quantizer_1pass; + struct jpeg_color_quantizer * quantizer_2pass; +} my_decomp_master; + +typedef my_decomp_master * my_master_ptr; + + +/* + * Determine whether merged upsample/color conversion should be used. + * CRUCIAL: this must match the actual capabilities of jdmerge.c! + */ + +LOCAL(boolean) +use_merged_upsample (j_decompress_ptr cinfo) +{ +#ifdef UPSAMPLE_MERGING_SUPPORTED + /* Merging is the equivalent of plain box-filter upsampling */ + if (cinfo->do_fancy_upsampling || cinfo->CCIR601_sampling) + return FALSE; + /* jdmerge.c only supports YCC=>RGB color conversion */ + if (cinfo->jpeg_color_space != JCS_YCbCr || cinfo->num_components != 3 || + cinfo->out_color_space != JCS_RGB || + cinfo->out_color_components != RGB_PIXELSIZE) + return FALSE; + /* and it only handles 2h1v or 2h2v sampling ratios */ + if (cinfo->comp_info[0].h_samp_factor != 2 || + cinfo->comp_info[1].h_samp_factor != 1 || + cinfo->comp_info[2].h_samp_factor != 1 || + cinfo->comp_info[0].v_samp_factor > 2 || + cinfo->comp_info[1].v_samp_factor != 1 || + cinfo->comp_info[2].v_samp_factor != 1) + return FALSE; + /* furthermore, it doesn't work if we've scaled the IDCTs differently */ + if (cinfo->comp_info[0].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[1].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[2].DCT_h_scaled_size != cinfo->min_DCT_h_scaled_size || + cinfo->comp_info[0].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[1].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size || + cinfo->comp_info[2].DCT_v_scaled_size != cinfo->min_DCT_v_scaled_size) + return FALSE; + /* ??? also need to test for upsample-time rescaling, when & if supported */ + return TRUE; /* by golly, it'll work... */ +#else + return FALSE; +#endif +} + + +/* + * Compute output image dimensions and related values. + * NOTE: this is exported for possible use by application. + * Hence it mustn't do anything that can't be done twice. + * Also note that it may be called before the master module is initialized! + */ + +GLOBAL(void) +jpeg_calc_output_dimensions (j_decompress_ptr cinfo) +/* Do computations that are needed before master selection phase. + * This function is used for full decompression. + */ +{ +#ifdef IDCT_SCALING_SUPPORTED + int ci; + jpeg_component_info *compptr; +#endif + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_READY) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + /* Compute core output image dimensions and DCT scaling choices. */ + jpeg_core_output_dimensions(cinfo); + +#ifdef IDCT_SCALING_SUPPORTED + + /* In selecting the actual DCT scaling for each component, we try to + * scale up the chroma components via IDCT scaling rather than upsampling. + * This saves time if the upsampler gets to use 1:1 scaling. + * Note this code adapts subsampling ratios which are powers of 2. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + int ssize = 1; + while (cinfo->min_DCT_h_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_h_samp_factor % (compptr->h_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } + compptr->DCT_h_scaled_size = cinfo->min_DCT_h_scaled_size * ssize; + ssize = 1; + while (cinfo->min_DCT_v_scaled_size * ssize <= + (cinfo->do_fancy_upsampling ? DCTSIZE : DCTSIZE / 2) && + (cinfo->max_v_samp_factor % (compptr->v_samp_factor * ssize * 2)) == 0) { + ssize = ssize * 2; + } + compptr->DCT_v_scaled_size = cinfo->min_DCT_v_scaled_size * ssize; + + /* We don't support IDCT ratios larger than 2. */ + if (compptr->DCT_h_scaled_size > compptr->DCT_v_scaled_size * 2) + compptr->DCT_h_scaled_size = compptr->DCT_v_scaled_size * 2; + else if (compptr->DCT_v_scaled_size > compptr->DCT_h_scaled_size * 2) + compptr->DCT_v_scaled_size = compptr->DCT_h_scaled_size * 2; + } + + /* Recompute downsampled dimensions of components; + * application needs to know these if using raw downsampled data. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Size in samples, after IDCT scaling */ + compptr->downsampled_width = (JDIMENSION) + jdiv_round_up((long) cinfo->image_width * + (long) (compptr->h_samp_factor * compptr->DCT_h_scaled_size), + (long) (cinfo->max_h_samp_factor * cinfo->block_size)); + compptr->downsampled_height = (JDIMENSION) + jdiv_round_up((long) cinfo->image_height * + (long) (compptr->v_samp_factor * compptr->DCT_v_scaled_size), + (long) (cinfo->max_v_samp_factor * cinfo->block_size)); + } + +#endif /* IDCT_SCALING_SUPPORTED */ + + /* Report number of components in selected colorspace. */ + /* Probably this should be in the color conversion module... */ + switch (cinfo->out_color_space) { + case JCS_GRAYSCALE: + cinfo->out_color_components = 1; + break; + case JCS_RGB: +#if RGB_PIXELSIZE != 3 + cinfo->out_color_components = RGB_PIXELSIZE; + break; +#endif /* else share code with YCbCr */ + case JCS_YCbCr: + cinfo->out_color_components = 3; + break; + case JCS_CMYK: + case JCS_YCCK: + cinfo->out_color_components = 4; + break; + default: /* else must be same colorspace as in file */ + cinfo->out_color_components = cinfo->num_components; + break; + } + cinfo->output_components = (cinfo->quantize_colors ? 1 : + cinfo->out_color_components); + + /* See if upsampler will want to emit more than one row at a time */ + if (use_merged_upsample(cinfo)) + cinfo->rec_outbuf_height = cinfo->max_v_samp_factor; + else + cinfo->rec_outbuf_height = 1; +} + + +/* + * Several decompression processes need to range-limit values to the range + * 0..MAXJSAMPLE; the input value may fall somewhat outside this range + * due to noise introduced by quantization, roundoff error, etc. These + * processes are inner loops and need to be as fast as possible. On most + * machines, particularly CPUs with pipelines or instruction prefetch, + * a (subscript-check-less) C table lookup + * x = sample_range_limit[x]; + * is faster than explicit tests + * if (x < 0) x = 0; + * else if (x > MAXJSAMPLE) x = MAXJSAMPLE; + * These processes all use a common table prepared by the routine below. + * + * For most steps we can mathematically guarantee that the initial value + * of x is within MAXJSAMPLE+1 of the legal range, so a table running from + * -(MAXJSAMPLE+1) to 2*MAXJSAMPLE+1 is sufficient. But for the initial + * limiting step (just after the IDCT), a wildly out-of-range value is + * possible if the input data is corrupt. To avoid any chance of indexing + * off the end of memory and getting a bad-pointer trap, we perform the + * post-IDCT limiting thus: + * x = range_limit[x & MASK]; + * where MASK is 2 bits wider than legal sample data, ie 10 bits for 8-bit + * samples. Under normal circumstances this is more than enough range and + * a correct output will be generated; with bogus input data the mask will + * cause wraparound, and we will safely generate a bogus-but-in-range output. + * For the post-IDCT step, we want to convert the data from signed to unsigned + * representation by adding CENTERJSAMPLE at the same time that we limit it. + * So the post-IDCT limiting table ends up looking like this: + * CENTERJSAMPLE,CENTERJSAMPLE+1,...,MAXJSAMPLE, + * MAXJSAMPLE (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0 (repeat 2*(MAXJSAMPLE+1)-CENTERJSAMPLE times), + * 0,1,...,CENTERJSAMPLE-1 + * Negative inputs select values from the upper half of the table after + * masking. + * + * We can save some space by overlapping the start of the post-IDCT table + * with the simpler range limiting table. The post-IDCT table begins at + * sample_range_limit + CENTERJSAMPLE. + * + * Note that the table is allocated in near data space on PCs; it's small + * enough and used often enough to justify this. + */ + +LOCAL(void) +prepare_range_limit_table (j_decompress_ptr cinfo) +/* Allocate and fill in the sample_range_limit table */ +{ + JSAMPLE * table; + int i; + + table = (JSAMPLE *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (5 * (MAXJSAMPLE+1) + CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + table += (MAXJSAMPLE+1); /* allow negative subscripts of simple table */ + cinfo->sample_range_limit = table; + /* First segment of "simple" table: limit[x] = 0 for x < 0 */ + MEMZERO(table - (MAXJSAMPLE+1), (MAXJSAMPLE+1) * SIZEOF(JSAMPLE)); + /* Main part of "simple" table: limit[x] = x */ + for (i = 0; i <= MAXJSAMPLE; i++) + table[i] = (JSAMPLE) i; + table += CENTERJSAMPLE; /* Point to where post-IDCT table starts */ + /* End of simple table, rest of first half of post-IDCT table */ + for (i = CENTERJSAMPLE; i < 2*(MAXJSAMPLE+1); i++) + table[i] = MAXJSAMPLE; + /* Second half of post-IDCT table */ + MEMZERO(table + (2 * (MAXJSAMPLE+1)), + (2 * (MAXJSAMPLE+1) - CENTERJSAMPLE) * SIZEOF(JSAMPLE)); + MEMCOPY(table + (4 * (MAXJSAMPLE+1) - CENTERJSAMPLE), + cinfo->sample_range_limit, CENTERJSAMPLE * SIZEOF(JSAMPLE)); +} + + +/* + * Master selection of decompression modules. + * This is done once at jpeg_start_decompress time. We determine + * which modules will be used and give them appropriate initialization calls. + * We also initialize the decompressor input side to begin consuming data. + * + * Since jpeg_read_header has finished, we know what is in the SOF + * and (first) SOS markers. We also have all the application parameter + * settings. + */ + +LOCAL(void) +master_selection (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + boolean use_c_buffer; + long samplesperrow; + JDIMENSION jd_samplesperrow; + + /* Initialize dimensions and other stuff */ + jpeg_calc_output_dimensions(cinfo); + prepare_range_limit_table(cinfo); + + /* Width of an output scanline must be representable as JDIMENSION. */ + samplesperrow = (long) cinfo->output_width * (long) cinfo->out_color_components; + jd_samplesperrow = (JDIMENSION) samplesperrow; + if ((long) jd_samplesperrow != samplesperrow) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + + /* Initialize my private state */ + master->pass_number = 0; + master->using_merged_upsample = use_merged_upsample(cinfo); + + /* Color quantizer selection */ + master->quantizer_1pass = NULL; + master->quantizer_2pass = NULL; + /* No mode changes if not using buffered-image mode. */ + if (! cinfo->quantize_colors || ! cinfo->buffered_image) { + cinfo->enable_1pass_quant = FALSE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + } + if (cinfo->quantize_colors) { + if (cinfo->raw_data_out) + ERREXIT(cinfo, JERR_NOTIMPL); + /* 2-pass quantizer only works in 3-component color space. */ + if (cinfo->out_color_components != 3) { + cinfo->enable_1pass_quant = TRUE; + cinfo->enable_external_quant = FALSE; + cinfo->enable_2pass_quant = FALSE; + cinfo->colormap = NULL; + } else if (cinfo->colormap != NULL) { + cinfo->enable_external_quant = TRUE; + } else if (cinfo->two_pass_quantize) { + cinfo->enable_2pass_quant = TRUE; + } else { + cinfo->enable_1pass_quant = TRUE; + } + + if (cinfo->enable_1pass_quant) { +#ifdef QUANT_1PASS_SUPPORTED + jinit_1pass_quantizer(cinfo); + master->quantizer_1pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + + /* We use the 2-pass code to map to external colormaps. */ + if (cinfo->enable_2pass_quant || cinfo->enable_external_quant) { +#ifdef QUANT_2PASS_SUPPORTED + jinit_2pass_quantizer(cinfo); + master->quantizer_2pass = cinfo->cquantize; +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } + /* If both quantizers are initialized, the 2-pass one is left active; + * this is necessary for starting with quantization to an external map. + */ + } + + /* Post-processing: in particular, color conversion first */ + if (! cinfo->raw_data_out) { + if (master->using_merged_upsample) { +#ifdef UPSAMPLE_MERGING_SUPPORTED + jinit_merged_upsampler(cinfo); /* does color conversion too */ +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif + } else { + jinit_color_deconverter(cinfo); + jinit_upsampler(cinfo); + } + jinit_d_post_controller(cinfo, cinfo->enable_2pass_quant); + } + /* Inverse DCT */ + jinit_inverse_dct(cinfo); + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); + } + + /* Initialize principal buffer controllers. */ + use_c_buffer = cinfo->inputctl->has_multiple_scans || cinfo->buffered_image; + jinit_d_coef_controller(cinfo, use_c_buffer); + + if (! cinfo->raw_data_out) + jinit_d_main_controller(cinfo, FALSE /* never need full buffer here */); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + +#ifdef D_MULTISCAN_FILES_SUPPORTED + /* If jpeg_start_decompress will read the whole file, initialize + * progress monitoring appropriately. The input step is counted + * as one pass. + */ + if (cinfo->progress != NULL && ! cinfo->buffered_image && + cinfo->inputctl->has_multiple_scans) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = (cinfo->enable_2pass_quant ? 3 : 2); + /* Count the input pass as done */ + master->pass_number++; + } +#endif /* D_MULTISCAN_FILES_SUPPORTED */ +} + + +/* + * Per-pass setup. + * This is called at the beginning of each output pass. We determine which + * modules will be active during this pass and give them appropriate + * start_pass calls. We also set is_dummy_pass to indicate whether this + * is a "real" output pass or a dummy pass for color quantization. + * (In the latter case, jdapistd.c will crank the pass to completion.) + */ + +METHODDEF(void) +prepare_for_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (master->pub.is_dummy_pass) { +#ifdef QUANT_2PASS_SUPPORTED + /* Final pass of 2-pass quantization */ + master->pub.is_dummy_pass = FALSE; + (*cinfo->cquantize->start_pass) (cinfo, FALSE); + (*cinfo->post->start_pass) (cinfo, JBUF_CRANK_DEST); + (*cinfo->main->start_pass) (cinfo, JBUF_CRANK_DEST); +#else + ERREXIT(cinfo, JERR_NOT_COMPILED); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + if (cinfo->quantize_colors && cinfo->colormap == NULL) { + /* Select new quantization method */ + if (cinfo->two_pass_quantize && cinfo->enable_2pass_quant) { + cinfo->cquantize = master->quantizer_2pass; + master->pub.is_dummy_pass = TRUE; + } else if (cinfo->enable_1pass_quant) { + cinfo->cquantize = master->quantizer_1pass; + } else { + ERREXIT(cinfo, JERR_MODE_CHANGE); + } + } + (*cinfo->idct->start_pass) (cinfo); + (*cinfo->coef->start_output_pass) (cinfo); + if (! cinfo->raw_data_out) { + if (! master->using_merged_upsample) + (*cinfo->cconvert->start_pass) (cinfo); + (*cinfo->upsample->start_pass) (cinfo); + if (cinfo->quantize_colors) + (*cinfo->cquantize->start_pass) (cinfo, master->pub.is_dummy_pass); + (*cinfo->post->start_pass) (cinfo, + (master->pub.is_dummy_pass ? JBUF_SAVE_AND_PASS : JBUF_PASS_THRU)); + (*cinfo->main->start_pass) (cinfo, JBUF_PASS_THRU); + } + } + + /* Set up progress monitor's pass info if present */ + if (cinfo->progress != NULL) { + cinfo->progress->completed_passes = master->pass_number; + cinfo->progress->total_passes = master->pass_number + + (master->pub.is_dummy_pass ? 2 : 1); + /* In buffered-image mode, we assume one more output pass if EOI not + * yet reached, but no more passes if EOI has been reached. + */ + if (cinfo->buffered_image && ! cinfo->inputctl->eoi_reached) { + cinfo->progress->total_passes += (cinfo->enable_2pass_quant ? 2 : 1); + } + } +} + + +/* + * Finish up at end of an output pass. + */ + +METHODDEF(void) +finish_output_pass (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + if (cinfo->quantize_colors) + (*cinfo->cquantize->finish_pass) (cinfo); + master->pass_number++; +} + + +#ifdef D_MULTISCAN_FILES_SUPPORTED + +/* + * Switch to a new external colormap between output passes. + */ + +GLOBAL(void) +jpeg_new_colormap (j_decompress_ptr cinfo) +{ + my_master_ptr master = (my_master_ptr) cinfo->master; + + /* Prevent application from calling me at wrong times */ + if (cinfo->global_state != DSTATE_BUFIMAGE) + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + + if (cinfo->quantize_colors && cinfo->enable_external_quant && + cinfo->colormap != NULL) { + /* Select 2-pass quantizer for external colormap use */ + cinfo->cquantize = master->quantizer_2pass; + /* Notify quantizer of colormap change */ + (*cinfo->cquantize->new_color_map) (cinfo); + master->pub.is_dummy_pass = FALSE; /* just in case */ + } else + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + +#endif /* D_MULTISCAN_FILES_SUPPORTED */ + + +/* + * Initialize master decompression control and select active modules. + * This is performed at the start of jpeg_start_decompress. + */ + +GLOBAL(void) +jinit_master_decompress (j_decompress_ptr cinfo) +{ + my_master_ptr master; + + master = (my_master_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_decomp_master)); + cinfo->master = (struct jpeg_decomp_master *) master; + master->pub.prepare_for_output_pass = prepare_for_output_pass; + master->pub.finish_output_pass = finish_output_pass; + + master->pub.is_dummy_pass = FALSE; + + master_selection(cinfo); +} diff --git a/src/3rdparty/libjpeg/jdmerge.c b/src/3rdparty/libjpeg/jdmerge.c new file mode 100644 index 0000000..3744446 --- /dev/null +++ b/src/3rdparty/libjpeg/jdmerge.c @@ -0,0 +1,400 @@ +/* + * jdmerge.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains code for merged upsampling/color conversion. + * + * This file combines functions from jdsample.c and jdcolor.c; + * read those files first to understand what's going on. + * + * When the chroma components are to be upsampled by simple replication + * (ie, box filtering), we can save some work in color conversion by + * calculating all the output pixels corresponding to a pair of chroma + * samples at one time. In the conversion equations + * R = Y + K1 * Cr + * G = Y + K2 * Cb + K3 * Cr + * B = Y + K4 * Cb + * only the Y term varies among the group of pixels corresponding to a pair + * of chroma samples, so the rest of the terms can be calculated just once. + * At typical sampling ratios, this eliminates half or three-quarters of the + * multiplications needed for color conversion. + * + * This file currently provides implementations for the following cases: + * YCbCr => RGB color conversion only. + * Sampling ratios of 2h1v or 2h2v. + * No scaling needed at upsample time. + * Corner-aligned (non-CCIR601) sampling alignment. + * Other special cases could be added, but in most applications these are + * the only common cases. (For uncommon cases we fall back on the more + * general code in jdsample.c and jdcolor.c.) + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef UPSAMPLE_MERGING_SUPPORTED + + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Pointer to routine to do actual upsampling/conversion of one row group */ + JMETHOD(void, upmethod, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf)); + + /* Private state for YCC->RGB conversion */ + int * Cr_r_tab; /* => table for Cr to R conversion */ + int * Cb_b_tab; /* => table for Cb to B conversion */ + INT32 * Cr_g_tab; /* => table for Cr to G conversion */ + INT32 * Cb_g_tab; /* => table for Cb to G conversion */ + + /* For 2:1 vertical sampling, we produce two output rows at a time. + * We need a "spare" row buffer to hold the second output row if the + * application provides just a one-row buffer; we also use the spare + * to discard the dummy last row if the image height is odd. + */ + JSAMPROW spare_row; + boolean spare_full; /* T if spare buffer is occupied */ + + JDIMENSION out_row_width; /* samples per output row */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + +#define SCALEBITS 16 /* speediest right-shift on some machines */ +#define ONE_HALF ((INT32) 1 << (SCALEBITS-1)) +#define FIX(x) ((INT32) ((x) * (1L<RGB colorspace conversion. + * This is taken directly from jdcolor.c; see that file for more info. + */ + +LOCAL(void) +build_ycc_rgb_table (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int i; + INT32 x; + SHIFT_TEMPS + + upsample->Cr_r_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cb_b_tab = (int *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(int)); + upsample->Cr_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + upsample->Cb_g_tab = (INT32 *) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (MAXJSAMPLE+1) * SIZEOF(INT32)); + + for (i = 0, x = -CENTERJSAMPLE; i <= MAXJSAMPLE; i++, x++) { + /* i is the actual input pixel value, in the range 0..MAXJSAMPLE */ + /* The Cb or Cr value we are thinking of is x = i - CENTERJSAMPLE */ + /* Cr=>R value is nearest int to 1.40200 * x */ + upsample->Cr_r_tab[i] = (int) + RIGHT_SHIFT(FIX(1.40200) * x + ONE_HALF, SCALEBITS); + /* Cb=>B value is nearest int to 1.77200 * x */ + upsample->Cb_b_tab[i] = (int) + RIGHT_SHIFT(FIX(1.77200) * x + ONE_HALF, SCALEBITS); + /* Cr=>G value is scaled-up -0.71414 * x */ + upsample->Cr_g_tab[i] = (- FIX(0.71414)) * x; + /* Cb=>G value is scaled-up -0.34414 * x */ + /* We also add in ONE_HALF so that need not do it in inner loop */ + upsample->Cb_g_tab[i] = (- FIX(0.34414)) * x + ONE_HALF; + } +} + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_merged_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the spare buffer empty */ + upsample->spare_full = FALSE; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * The control routine just handles the row buffering considerations. + */ + +METHODDEF(void) +merged_2v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 2:1 vertical sampling case: may need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPROW work_ptrs[2]; + JDIMENSION num_rows; /* number of rows returned to caller */ + + if (upsample->spare_full) { + /* If we have a spare row saved from a previous cycle, just return it. */ + jcopy_sample_rows(& upsample->spare_row, 0, output_buf + *out_row_ctr, 0, + 1, upsample->out_row_width); + num_rows = 1; + upsample->spare_full = FALSE; + } else { + /* Figure number of rows to return to caller. */ + num_rows = 2; + /* Not more than the distance to the end of the image. */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + /* Create output pointer array for upsampler. */ + work_ptrs[0] = output_buf[*out_row_ctr]; + if (num_rows > 1) { + work_ptrs[1] = output_buf[*out_row_ctr + 1]; + } else { + work_ptrs[1] = upsample->spare_row; + upsample->spare_full = TRUE; + } + /* Now do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, work_ptrs); + } + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (! upsample->spare_full) + (*in_row_group_ctr)++; +} + + +METHODDEF(void) +merged_1v_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +/* 1:1 vertical sampling case: much easier, never need a spare row. */ +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Just do the upsampling. */ + (*upsample->upmethod) (cinfo, input_buf, *in_row_group_ctr, + output_buf + *out_row_ctr); + /* Adjust counts */ + (*out_row_ctr)++; + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by the control routines to do + * the actual upsampling/conversion. One row group is processed per call. + * + * Note: since we may be writing directly into application-supplied buffers, + * we have to be honest about the output width; we can't assume the buffer + * has been rounded up to an even width. + */ + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 1:1 vertical. + */ + +METHODDEF(void) +h2v1_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr; + JSAMPROW inptr0, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr0 = input_buf[0][in_row_group_ctr]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr = output_buf[0]; + /* Loop for each pair of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 2 Y values and emit 2 pixels */ + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr0++); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + outptr += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr0); + outptr[RGB_RED] = range_limit[y + cred]; + outptr[RGB_GREEN] = range_limit[y + cgreen]; + outptr[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Upsample and color convert for the case of 2:1 horizontal and 2:1 vertical. + */ + +METHODDEF(void) +h2v2_merged_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_group_ctr, + JSAMPARRAY output_buf) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + register int y, cred, cgreen, cblue; + int cb, cr; + register JSAMPROW outptr0, outptr1; + JSAMPROW inptr00, inptr01, inptr1, inptr2; + JDIMENSION col; + /* copy these pointers into registers if possible */ + register JSAMPLE * range_limit = cinfo->sample_range_limit; + int * Crrtab = upsample->Cr_r_tab; + int * Cbbtab = upsample->Cb_b_tab; + INT32 * Crgtab = upsample->Cr_g_tab; + INT32 * Cbgtab = upsample->Cb_g_tab; + SHIFT_TEMPS + + inptr00 = input_buf[0][in_row_group_ctr*2]; + inptr01 = input_buf[0][in_row_group_ctr*2 + 1]; + inptr1 = input_buf[1][in_row_group_ctr]; + inptr2 = input_buf[2][in_row_group_ctr]; + outptr0 = output_buf[0]; + outptr1 = output_buf[1]; + /* Loop for each group of output pixels */ + for (col = cinfo->output_width >> 1; col > 0; col--) { + /* Do the chroma part of the calculation */ + cb = GETJSAMPLE(*inptr1++); + cr = GETJSAMPLE(*inptr2++); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + /* Fetch 4 Y values and emit 4 pixels */ + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr00++); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + outptr0 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + y = GETJSAMPLE(*inptr01++); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + outptr1 += RGB_PIXELSIZE; + } + /* If image width is odd, do the last output column separately */ + if (cinfo->output_width & 1) { + cb = GETJSAMPLE(*inptr1); + cr = GETJSAMPLE(*inptr2); + cred = Crrtab[cr]; + cgreen = (int) RIGHT_SHIFT(Cbgtab[cb] + Crgtab[cr], SCALEBITS); + cblue = Cbbtab[cb]; + y = GETJSAMPLE(*inptr00); + outptr0[RGB_RED] = range_limit[y + cred]; + outptr0[RGB_GREEN] = range_limit[y + cgreen]; + outptr0[RGB_BLUE] = range_limit[y + cblue]; + y = GETJSAMPLE(*inptr01); + outptr1[RGB_RED] = range_limit[y + cred]; + outptr1[RGB_GREEN] = range_limit[y + cgreen]; + outptr1[RGB_BLUE] = range_limit[y + cblue]; + } +} + + +/* + * Module initialization routine for merged upsampling/color conversion. + * + * NB: this is called under the conditions determined by use_merged_upsample() + * in jdmaster.c. That routine MUST correspond to the actual capabilities + * of this module; no safety checks are made here. + */ + +GLOBAL(void) +jinit_merged_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_merged_upsample; + upsample->pub.need_context_rows = FALSE; + + upsample->out_row_width = cinfo->output_width * cinfo->out_color_components; + + if (cinfo->max_v_samp_factor == 2) { + upsample->pub.upsample = merged_2v_upsample; + upsample->upmethod = h2v2_merged_upsample; + /* Allocate a spare row buffer */ + upsample->spare_row = (JSAMPROW) + (*cinfo->mem->alloc_large) ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) (upsample->out_row_width * SIZEOF(JSAMPLE))); + } else { + upsample->pub.upsample = merged_1v_upsample; + upsample->upmethod = h2v1_merged_upsample; + /* No spare row needed */ + upsample->spare_row = NULL; + } + + build_ycc_rgb_table(cinfo); +} + +#endif /* UPSAMPLE_MERGING_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jdpostct.c b/src/3rdparty/libjpeg/jdpostct.c new file mode 100644 index 0000000..571563d --- /dev/null +++ b/src/3rdparty/libjpeg/jdpostct.c @@ -0,0 +1,290 @@ +/* + * jdpostct.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the decompression postprocessing controller. + * This controller manages the upsampling, color conversion, and color + * quantization/reduction steps; specifically, it controls the buffering + * between upsample/color conversion and color quantization/reduction. + * + * If no color quantization/reduction is required, then this module has no + * work to do, and it just hands off to the upsample/color conversion code. + * An integrated upsample/convert/quantize process would replace this module + * entirely. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Private buffer controller object */ + +typedef struct { + struct jpeg_d_post_controller pub; /* public fields */ + + /* Color quantization source buffer: this holds output data from + * the upsample/color conversion step to be passed to the quantizer. + * For two-pass color quantization, we need a full-image buffer; + * for one-pass operation, a strip buffer is sufficient. + */ + jvirt_sarray_ptr whole_image; /* virtual array, or NULL if one-pass */ + JSAMPARRAY buffer; /* strip buffer, or current strip of virtual */ + JDIMENSION strip_height; /* buffer size in rows */ + /* for two-pass mode only: */ + JDIMENSION starting_row; /* row # of first row in current strip */ + JDIMENSION next_row; /* index of next row to fill/empty in strip */ +} my_post_controller; + +typedef my_post_controller * my_post_ptr; + + +/* Forward declarations */ +METHODDEF(void) post_process_1pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#ifdef QUANT_2PASS_SUPPORTED +METHODDEF(void) post_process_prepass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +METHODDEF(void) post_process_2pass + JPP((j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +#endif + + +/* + * Initialize for a processing pass. + */ + +METHODDEF(void) +start_pass_dpost (j_decompress_ptr cinfo, J_BUF_MODE pass_mode) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + + switch (pass_mode) { + case JBUF_PASS_THRU: + if (cinfo->quantize_colors) { + /* Single-pass processing with color quantization. */ + post->pub.post_process_data = post_process_1pass; + /* We could be doing buffered-image output before starting a 2-pass + * color quantization; in that case, jinit_d_post_controller did not + * allocate a strip buffer. Use the virtual-array buffer as workspace. + */ + if (post->buffer == NULL) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + (JDIMENSION) 0, post->strip_height, TRUE); + } + } else { + /* For single-pass processing without color quantization, + * I have no work to do; just call the upsampler directly. + */ + post->pub.post_process_data = cinfo->upsample->upsample; + } + break; +#ifdef QUANT_2PASS_SUPPORTED + case JBUF_SAVE_AND_PASS: + /* First pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_prepass; + break; + case JBUF_CRANK_DEST: + /* Second pass of 2-pass quantization */ + if (post->whole_image == NULL) + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + post->pub.post_process_data = post_process_2pass; + break; +#endif /* QUANT_2PASS_SUPPORTED */ + default: + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); + break; + } + post->starting_row = post->next_row = 0; +} + + +/* + * Process some data in the one-pass (strip buffer) case. + * This is used for color precision reduction as well as one-pass quantization. + */ + +METHODDEF(void) +post_process_1pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Fill the buffer, but not more than what we can dump out in one go. */ + /* Note we rely on the upsampler to detect bottom of image. */ + max_rows = out_rows_avail - *out_row_ctr; + if (max_rows > post->strip_height) + max_rows = post->strip_height; + num_rows = 0; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &num_rows, max_rows); + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer, output_buf + *out_row_ctr, (int) num_rows); + *out_row_ctr += num_rows; +} + + +#ifdef QUANT_2PASS_SUPPORTED + +/* + * Process some data in the first pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_prepass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION old_next_row, num_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, TRUE); + } + + /* Upsample some data (up to a strip height's worth). */ + old_next_row = post->next_row; + (*cinfo->upsample->upsample) (cinfo, + input_buf, in_row_group_ctr, in_row_groups_avail, + post->buffer, &post->next_row, post->strip_height); + + /* Allow quantizer to scan new data. No data is emitted, */ + /* but we advance out_row_ctr so outer loop can tell when we're done. */ + if (post->next_row > old_next_row) { + num_rows = post->next_row - old_next_row; + (*cinfo->cquantize->color_quantize) (cinfo, post->buffer + old_next_row, + (JSAMPARRAY) NULL, (int) num_rows); + *out_row_ctr += num_rows; + } + + /* Advance if we filled the strip. */ + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + + +/* + * Process some data in the second pass of 2-pass quantization. + */ + +METHODDEF(void) +post_process_2pass (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_post_ptr post = (my_post_ptr) cinfo->post; + JDIMENSION num_rows, max_rows; + + /* Reposition virtual buffer if at start of strip. */ + if (post->next_row == 0) { + post->buffer = (*cinfo->mem->access_virt_sarray) + ((j_common_ptr) cinfo, post->whole_image, + post->starting_row, post->strip_height, FALSE); + } + + /* Determine number of rows to emit. */ + num_rows = post->strip_height - post->next_row; /* available in strip */ + max_rows = out_rows_avail - *out_row_ctr; /* available in output area */ + if (num_rows > max_rows) + num_rows = max_rows; + /* We have to check bottom of image here, can't depend on upsampler. */ + max_rows = cinfo->output_height - post->starting_row; + if (num_rows > max_rows) + num_rows = max_rows; + + /* Quantize and emit data. */ + (*cinfo->cquantize->color_quantize) (cinfo, + post->buffer + post->next_row, output_buf + *out_row_ctr, + (int) num_rows); + *out_row_ctr += num_rows; + + /* Advance if we filled the strip. */ + post->next_row += num_rows; + if (post->next_row >= post->strip_height) { + post->starting_row += post->strip_height; + post->next_row = 0; + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ + + +/* + * Initialize postprocessing controller. + */ + +GLOBAL(void) +jinit_d_post_controller (j_decompress_ptr cinfo, boolean need_full_buffer) +{ + my_post_ptr post; + + post = (my_post_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_post_controller)); + cinfo->post = (struct jpeg_d_post_controller *) post; + post->pub.start_pass = start_pass_dpost; + post->whole_image = NULL; /* flag for no virtual arrays */ + post->buffer = NULL; /* flag for no strip buffer */ + + /* Create the quantization buffer, if needed */ + if (cinfo->quantize_colors) { + /* The buffer strip height is max_v_samp_factor, which is typically + * an efficient number of rows for upsampling to return. + * (In the presence of output rescaling, we might want to be smarter?) + */ + post->strip_height = (JDIMENSION) cinfo->max_v_samp_factor; + if (need_full_buffer) { + /* Two-pass color quantization: need full-image storage. */ + /* We round up the number of rows to a multiple of the strip height. */ +#ifdef QUANT_2PASS_SUPPORTED + post->whole_image = (*cinfo->mem->request_virt_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, FALSE, + cinfo->output_width * cinfo->out_color_components, + (JDIMENSION) jround_up((long) cinfo->output_height, + (long) post->strip_height), + post->strip_height); +#else + ERREXIT(cinfo, JERR_BAD_BUFFER_MODE); +#endif /* QUANT_2PASS_SUPPORTED */ + } else { + /* One-pass color quantization: just make a strip buffer. */ + post->buffer = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + cinfo->output_width * cinfo->out_color_components, + post->strip_height); + } + } +} diff --git a/src/3rdparty/libjpeg/jdsample.c b/src/3rdparty/libjpeg/jdsample.c new file mode 100644 index 0000000..7bc8885 --- /dev/null +++ b/src/3rdparty/libjpeg/jdsample.c @@ -0,0 +1,361 @@ +/* + * jdsample.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2002-2008 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains upsampling routines. + * + * Upsampling input data is counted in "row groups". A row group + * is defined to be (v_samp_factor * DCT_v_scaled_size / min_DCT_v_scaled_size) + * sample rows of each component. Upsampling will normally produce + * max_v_samp_factor pixel rows from each row group (but this could vary + * if the upsampler is applying a scale factor of its own). + * + * An excellent reference for image resampling is + * Digital Image Warping, George Wolberg, 1990. + * Pub. by IEEE Computer Society Press, Los Alamitos, CA. ISBN 0-8186-8944-7. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Pointer to routine to upsample a single component */ +typedef JMETHOD(void, upsample1_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr)); + +/* Private subobject */ + +typedef struct { + struct jpeg_upsampler pub; /* public fields */ + + /* Color conversion buffer. When using separate upsampling and color + * conversion steps, this buffer holds one upsampled row group until it + * has been color converted and output. + * Note: we do not allocate any storage for component(s) which are full-size, + * ie do not need rescaling. The corresponding entry of color_buf[] is + * simply set to point to the input data array, thereby avoiding copying. + */ + JSAMPARRAY color_buf[MAX_COMPONENTS]; + + /* Per-component upsampling method pointers */ + upsample1_ptr methods[MAX_COMPONENTS]; + + int next_row_out; /* counts rows emitted from color_buf */ + JDIMENSION rows_to_go; /* counts rows remaining in image */ + + /* Height of an input row group for each component. */ + int rowgroup_height[MAX_COMPONENTS]; + + /* These arrays save pixel expansion factors so that int_expand need not + * recompute them each time. They are unused for other upsampling methods. + */ + UINT8 h_expand[MAX_COMPONENTS]; + UINT8 v_expand[MAX_COMPONENTS]; +} my_upsampler; + +typedef my_upsampler * my_upsample_ptr; + + +/* + * Initialize for an upsampling pass. + */ + +METHODDEF(void) +start_pass_upsample (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + + /* Mark the conversion buffer empty */ + upsample->next_row_out = cinfo->max_v_samp_factor; + /* Initialize total-height counter for detecting bottom of image */ + upsample->rows_to_go = cinfo->output_height; +} + + +/* + * Control routine to do upsampling (and color conversion). + * + * In this version we upsample each component independently. + * We upsample one row group into the conversion buffer, then apply + * color conversion a row at a time. + */ + +METHODDEF(void) +sep_upsample (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + int ci; + jpeg_component_info * compptr; + JDIMENSION num_rows; + + /* Fill the conversion buffer, if it's empty */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) { + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Invoke per-component upsample method. Notice we pass a POINTER + * to color_buf[ci], so that fullsize_upsample can change it. + */ + (*upsample->methods[ci]) (cinfo, compptr, + input_buf[ci] + (*in_row_group_ctr * upsample->rowgroup_height[ci]), + upsample->color_buf + ci); + } + upsample->next_row_out = 0; + } + + /* Color-convert and emit rows */ + + /* How many we have in the buffer: */ + num_rows = (JDIMENSION) (cinfo->max_v_samp_factor - upsample->next_row_out); + /* Not more than the distance to the end of the image. Need this test + * in case the image height is not a multiple of max_v_samp_factor: + */ + if (num_rows > upsample->rows_to_go) + num_rows = upsample->rows_to_go; + /* And not more than what the client can accept: */ + out_rows_avail -= *out_row_ctr; + if (num_rows > out_rows_avail) + num_rows = out_rows_avail; + + (*cinfo->cconvert->color_convert) (cinfo, upsample->color_buf, + (JDIMENSION) upsample->next_row_out, + output_buf + *out_row_ctr, + (int) num_rows); + + /* Adjust counts */ + *out_row_ctr += num_rows; + upsample->rows_to_go -= num_rows; + upsample->next_row_out += num_rows; + /* When the buffer is emptied, declare this input row group consumed */ + if (upsample->next_row_out >= cinfo->max_v_samp_factor) + (*in_row_group_ctr)++; +} + + +/* + * These are the routines invoked by sep_upsample to upsample pixel values + * of a single component. One row group is processed per call. + */ + + +/* + * For full-size components, we just make color_buf[ci] point at the + * input buffer, and thus avoid copying any data. Note that this is + * safe only because sep_upsample doesn't declare the input row group + * "consumed" until we are done color converting and emitting it. + */ + +METHODDEF(void) +fullsize_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = input_data; +} + + +/* + * This is a no-op version used for "uninteresting" components. + * These components will not be referenced by color conversion. + */ + +METHODDEF(void) +noop_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + *output_data_ptr = NULL; /* safety check */ +} + + +/* + * This version handles any integral sampling ratios. + * This is not used for typical JPEG files, so it need not be fast. + * Nor, for that matter, is it particularly accurate: the algorithm is + * simple replication of the input pixel onto the corresponding output + * pixels. The hi-falutin sampling literature refers to this as a + * "box filter". A box filter tends to introduce visible artifacts, + * so if you are actually going to use 3:1 or 4:1 sampling ratios + * you would be well advised to improve this code. + */ + +METHODDEF(void) +int_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + my_upsample_ptr upsample = (my_upsample_ptr) cinfo->upsample; + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + register int h; + JSAMPROW outend; + int h_expand, v_expand; + int inrow, outrow; + + h_expand = upsample->h_expand[compptr->component_index]; + v_expand = upsample->v_expand[compptr->component_index]; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + /* Generate one output row with proper horizontal expansion */ + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + for (h = h_expand; h > 0; h--) { + *outptr++ = invalue; + } + } + /* Generate any additional output rows by duplicating the first one */ + if (v_expand > 1) { + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + v_expand-1, cinfo->output_width); + } + inrow++; + outrow += v_expand; + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 1:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v1_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int outrow; + + for (outrow = 0; outrow < cinfo->max_v_samp_factor; outrow++) { + inptr = input_data[outrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + } +} + + +/* + * Fast processing for the common case of 2:1 horizontal and 2:1 vertical. + * It's still a box filter. + */ + +METHODDEF(void) +h2v2_upsample (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY input_data, JSAMPARRAY * output_data_ptr) +{ + JSAMPARRAY output_data = *output_data_ptr; + register JSAMPROW inptr, outptr; + register JSAMPLE invalue; + JSAMPROW outend; + int inrow, outrow; + + inrow = outrow = 0; + while (outrow < cinfo->max_v_samp_factor) { + inptr = input_data[inrow]; + outptr = output_data[outrow]; + outend = outptr + cinfo->output_width; + while (outptr < outend) { + invalue = *inptr++; /* don't need GETJSAMPLE() here */ + *outptr++ = invalue; + *outptr++ = invalue; + } + jcopy_sample_rows(output_data, outrow, output_data, outrow+1, + 1, cinfo->output_width); + inrow++; + outrow += 2; + } +} + + +/* + * Module initialization routine for upsampling. + */ + +GLOBAL(void) +jinit_upsampler (j_decompress_ptr cinfo) +{ + my_upsample_ptr upsample; + int ci; + jpeg_component_info * compptr; + boolean need_buffer; + int h_in_group, v_in_group, h_out_group, v_out_group; + + upsample = (my_upsample_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_upsampler)); + cinfo->upsample = (struct jpeg_upsampler *) upsample; + upsample->pub.start_pass = start_pass_upsample; + upsample->pub.upsample = sep_upsample; + upsample->pub.need_context_rows = FALSE; /* until we find out differently */ + + if (cinfo->CCIR601_sampling) /* this isn't supported */ + ERREXIT(cinfo, JERR_CCIR601_NOTIMPL); + + /* Verify we can handle the sampling factors, select per-component methods, + * and create storage as needed. + */ + for (ci = 0, compptr = cinfo->comp_info; ci < cinfo->num_components; + ci++, compptr++) { + /* Compute size of an "input group" after IDCT scaling. This many samples + * are to be converted to max_h_samp_factor * max_v_samp_factor pixels. + */ + h_in_group = (compptr->h_samp_factor * compptr->DCT_h_scaled_size) / + cinfo->min_DCT_h_scaled_size; + v_in_group = (compptr->v_samp_factor * compptr->DCT_v_scaled_size) / + cinfo->min_DCT_v_scaled_size; + h_out_group = cinfo->max_h_samp_factor; + v_out_group = cinfo->max_v_samp_factor; + upsample->rowgroup_height[ci] = v_in_group; /* save for use later */ + need_buffer = TRUE; + if (! compptr->component_needed) { + /* Don't bother to upsample an uninteresting component. */ + upsample->methods[ci] = noop_upsample; + need_buffer = FALSE; + } else if (h_in_group == h_out_group && v_in_group == v_out_group) { + /* Fullsize components can be processed without any work. */ + upsample->methods[ci] = fullsize_upsample; + need_buffer = FALSE; + } else if (h_in_group * 2 == h_out_group && + v_in_group == v_out_group) { + /* Special case for 2h1v upsampling */ + upsample->methods[ci] = h2v1_upsample; + } else if (h_in_group * 2 == h_out_group && + v_in_group * 2 == v_out_group) { + /* Special case for 2h2v upsampling */ + upsample->methods[ci] = h2v2_upsample; + } else if ((h_out_group % h_in_group) == 0 && + (v_out_group % v_in_group) == 0) { + /* Generic integral-factors upsampling method */ + upsample->methods[ci] = int_upsample; + upsample->h_expand[ci] = (UINT8) (h_out_group / h_in_group); + upsample->v_expand[ci] = (UINT8) (v_out_group / v_in_group); + } else + ERREXIT(cinfo, JERR_FRACT_SAMPLE_NOTIMPL); + if (need_buffer) { + upsample->color_buf[ci] = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) jround_up((long) cinfo->output_width, + (long) cinfo->max_h_samp_factor), + (JDIMENSION) cinfo->max_v_samp_factor); + } + } +} diff --git a/src/3rdparty/libjpeg/jdtrans.c b/src/3rdparty/libjpeg/jdtrans.c new file mode 100644 index 0000000..22dd47f --- /dev/null +++ b/src/3rdparty/libjpeg/jdtrans.c @@ -0,0 +1,140 @@ +/* + * jdtrans.c + * + * Copyright (C) 1995-1997, Thomas G. Lane. + * Modified 2000-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains library routines for transcoding decompression, + * that is, reading raw DCT coefficient arrays from an input JPEG file. + * The routines in jdapimin.c will also be needed by a transcoder. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* Forward declarations */ +LOCAL(void) transdecode_master_selection JPP((j_decompress_ptr cinfo)); + + +/* + * Read the coefficient arrays from a JPEG file. + * jpeg_read_header must be completed before calling this. + * + * The entire image is read into a set of virtual coefficient-block arrays, + * one per component. The return value is a pointer to the array of + * virtual-array descriptors. These can be manipulated directly via the + * JPEG memory manager, or handed off to jpeg_write_coefficients(). + * To release the memory occupied by the virtual arrays, call + * jpeg_finish_decompress() when done with the data. + * + * An alternative usage is to simply obtain access to the coefficient arrays + * during a buffered-image-mode decompression operation. This is allowed + * after any jpeg_finish_output() call. The arrays can be accessed until + * jpeg_finish_decompress() is called. (Note that any call to the library + * may reposition the arrays, so don't rely on access_virt_barray() results + * to stay valid across library calls.) + * + * Returns NULL if suspended. This case need be checked only if + * a suspending data source is used. + */ + +GLOBAL(jvirt_barray_ptr *) +jpeg_read_coefficients (j_decompress_ptr cinfo) +{ + if (cinfo->global_state == DSTATE_READY) { + /* First call: initialize active modules */ + transdecode_master_selection(cinfo); + cinfo->global_state = DSTATE_RDCOEFS; + } + if (cinfo->global_state == DSTATE_RDCOEFS) { + /* Absorb whole file into the coef buffer */ + for (;;) { + int retcode; + /* Call progress monitor hook if present */ + if (cinfo->progress != NULL) + (*cinfo->progress->progress_monitor) ((j_common_ptr) cinfo); + /* Absorb some more input */ + retcode = (*cinfo->inputctl->consume_input) (cinfo); + if (retcode == JPEG_SUSPENDED) + return NULL; + if (retcode == JPEG_REACHED_EOI) + break; + /* Advance progress counter if appropriate */ + if (cinfo->progress != NULL && + (retcode == JPEG_ROW_COMPLETED || retcode == JPEG_REACHED_SOS)) { + if (++cinfo->progress->pass_counter >= cinfo->progress->pass_limit) { + /* startup underestimated number of scans; ratchet up one scan */ + cinfo->progress->pass_limit += (long) cinfo->total_iMCU_rows; + } + } + } + /* Set state so that jpeg_finish_decompress does the right thing */ + cinfo->global_state = DSTATE_STOPPING; + } + /* At this point we should be in state DSTATE_STOPPING if being used + * standalone, or in state DSTATE_BUFIMAGE if being invoked to get access + * to the coefficients during a full buffered-image-mode decompression. + */ + if ((cinfo->global_state == DSTATE_STOPPING || + cinfo->global_state == DSTATE_BUFIMAGE) && cinfo->buffered_image) { + return cinfo->coef->coef_arrays; + } + /* Oops, improper usage */ + ERREXIT1(cinfo, JERR_BAD_STATE, cinfo->global_state); + return NULL; /* keep compiler happy */ +} + + +/* + * Master selection of decompression modules for transcoding. + * This substitutes for jdmaster.c's initialization of the full decompressor. + */ + +LOCAL(void) +transdecode_master_selection (j_decompress_ptr cinfo) +{ + /* This is effectively a buffered-image operation. */ + cinfo->buffered_image = TRUE; + + /* Compute output image dimensions and related values. */ + jpeg_core_output_dimensions(cinfo); + + /* Entropy decoding: either Huffman or arithmetic coding. */ + if (cinfo->arith_code) + jinit_arith_decoder(cinfo); + else { + jinit_huff_decoder(cinfo); + } + + /* Always get a full-image coefficient buffer. */ + jinit_d_coef_controller(cinfo, TRUE); + + /* We can now tell the memory manager to allocate virtual arrays. */ + (*cinfo->mem->realize_virt_arrays) ((j_common_ptr) cinfo); + + /* Initialize input side of decompressor to consume first scan. */ + (*cinfo->inputctl->start_input_pass) (cinfo); + + /* Initialize progress monitoring. */ + if (cinfo->progress != NULL) { + int nscans; + /* Estimate number of scans to set pass_limit. */ + if (cinfo->progressive_mode) { + /* Arbitrarily estimate 2 interleaved DC scans + 3 AC scans/component. */ + nscans = 2 + 3 * cinfo->num_components; + } else if (cinfo->inputctl->has_multiple_scans) { + /* For a nonprogressive multiscan file, estimate 1 scan per component. */ + nscans = cinfo->num_components; + } else { + nscans = 1; + } + cinfo->progress->pass_counter = 0L; + cinfo->progress->pass_limit = (long) cinfo->total_iMCU_rows * nscans; + cinfo->progress->completed_passes = 0; + cinfo->progress->total_passes = 1; + } +} diff --git a/src/3rdparty/libjpeg/jerror.c b/src/3rdparty/libjpeg/jerror.c new file mode 100644 index 0000000..3da7be8 --- /dev/null +++ b/src/3rdparty/libjpeg/jerror.c @@ -0,0 +1,252 @@ +/* + * jerror.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains simple error-reporting and trace-message routines. + * These are suitable for Unix-like systems and others where writing to + * stderr is the right thing to do. Many applications will want to replace + * some or all of these routines. + * + * If you define USE_WINDOWS_MESSAGEBOX in jconfig.h or in the makefile, + * you get a Windows-specific hack to display error messages in a dialog box. + * It ain't much, but it beats dropping error messages into the bit bucket, + * which is what happens to output to stderr under most Windows C compilers. + * + * These routines are used by both the compression and decompression code. + */ + +/* this is not a core library module, so it doesn't define JPEG_INTERNALS */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jversion.h" +#include "jerror.h" + +#ifdef USE_WINDOWS_MESSAGEBOX +#include +#endif + +#ifndef EXIT_FAILURE /* define exit() codes if not provided */ +#define EXIT_FAILURE 1 +#endif + + +/* + * Create the message string table. + * We do this from the master message list in jerror.h by re-reading + * jerror.h with a suitable definition for macro JMESSAGE. + * The message table is made an external symbol just in case any applications + * want to refer to it directly. + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_message_table jMsgTable +#endif + +#define JMESSAGE(code,string) string , + +const char * const jpeg_std_message_table[] = { +#include "jerror.h" + NULL +}; + + +/* + * Error exit handler: must not return to caller. + * + * Applications may override this if they want to get control back after + * an error. Typically one would longjmp somewhere instead of exiting. + * The setjmp buffer can be made a private field within an expanded error + * handler object. Note that the info needed to generate an error message + * is stored in the error object, so you can generate the message now or + * later, at your convenience. + * You should make sure that the JPEG object is cleaned up (with jpeg_abort + * or jpeg_destroy) at some point. + */ + +METHODDEF(void) +error_exit (j_common_ptr cinfo) +{ + /* Always display the message */ + (*cinfo->err->output_message) (cinfo); + + /* Let the memory manager delete any temp files before we die */ + jpeg_destroy(cinfo); + + exit(EXIT_FAILURE); +} + + +/* + * Actual output of an error or trace message. + * Applications may override this method to send JPEG messages somewhere + * other than stderr. + * + * On Windows, printing to stderr is generally completely useless, + * so we provide optional code to produce an error-dialog popup. + * Most Windows applications will still prefer to override this routine, + * but if they don't, it'll do something at least marginally useful. + * + * NOTE: to use the library in an environment that doesn't support the + * C stdio library, you may have to delete the call to fprintf() entirely, + * not just not use this routine. + */ + +METHODDEF(void) +output_message (j_common_ptr cinfo) +{ + char buffer[JMSG_LENGTH_MAX]; + + /* Create the message */ + (*cinfo->err->format_message) (cinfo, buffer); + +#ifdef USE_WINDOWS_MESSAGEBOX + /* Display it in a message dialog box */ + MessageBox(GetActiveWindow(), buffer, "JPEG Library Error", + MB_OK | MB_ICONERROR); +#else + /* Send it to stderr, adding a newline */ + fprintf(stderr, "%s\n", buffer); +#endif +} + + +/* + * Decide whether to emit a trace or warning message. + * msg_level is one of: + * -1: recoverable corrupt-data warning, may want to abort. + * 0: important advisory messages (always display to user). + * 1: first level of tracing detail. + * 2,3,...: successively more detailed tracing messages. + * An application might override this method if it wanted to abort on warnings + * or change the policy about which messages to display. + */ + +METHODDEF(void) +emit_message (j_common_ptr cinfo, int msg_level) +{ + struct jpeg_error_mgr * err = cinfo->err; + + if (msg_level < 0) { + /* It's a warning message. Since corrupt files may generate many warnings, + * the policy implemented here is to show only the first warning, + * unless trace_level >= 3. + */ + if (err->num_warnings == 0 || err->trace_level >= 3) + (*err->output_message) (cinfo); + /* Always count warnings in num_warnings. */ + err->num_warnings++; + } else { + /* It's a trace message. Show it if trace_level >= msg_level. */ + if (err->trace_level >= msg_level) + (*err->output_message) (cinfo); + } +} + + +/* + * Format a message string for the most recent JPEG error or message. + * The message is stored into buffer, which should be at least JMSG_LENGTH_MAX + * characters. Note that no '\n' character is added to the string. + * Few applications should need to override this method. + */ + +METHODDEF(void) +format_message (j_common_ptr cinfo, char * buffer) +{ + struct jpeg_error_mgr * err = cinfo->err; + int msg_code = err->msg_code; + const char * msgtext = NULL; + const char * msgptr; + char ch; + boolean isstring; + + /* Look up message string in proper table */ + if (msg_code > 0 && msg_code <= err->last_jpeg_message) { + msgtext = err->jpeg_message_table[msg_code]; + } else if (err->addon_message_table != NULL && + msg_code >= err->first_addon_message && + msg_code <= err->last_addon_message) { + msgtext = err->addon_message_table[msg_code - err->first_addon_message]; + } + + /* Defend against bogus message number */ + if (msgtext == NULL) { + err->msg_parm.i[0] = msg_code; + msgtext = err->jpeg_message_table[0]; + } + + /* Check for string parameter, as indicated by %s in the message text */ + isstring = FALSE; + msgptr = msgtext; + while ((ch = *msgptr++) != '\0') { + if (ch == '%') { + if (*msgptr == 's') isstring = TRUE; + break; + } + } + + /* Format the message into the passed buffer */ + if (isstring) + sprintf(buffer, msgtext, err->msg_parm.s); + else + sprintf(buffer, msgtext, + err->msg_parm.i[0], err->msg_parm.i[1], + err->msg_parm.i[2], err->msg_parm.i[3], + err->msg_parm.i[4], err->msg_parm.i[5], + err->msg_parm.i[6], err->msg_parm.i[7]); +} + + +/* + * Reset error state variables at start of a new image. + * This is called during compression startup to reset trace/error + * processing to default state, without losing any application-specific + * method pointers. An application might possibly want to override + * this method if it has additional error processing state. + */ + +METHODDEF(void) +reset_error_mgr (j_common_ptr cinfo) +{ + cinfo->err->num_warnings = 0; + /* trace_level is not reset since it is an application-supplied parameter */ + cinfo->err->msg_code = 0; /* may be useful as a flag for "no error" */ +} + + +/* + * Fill in the standard error-handling methods in a jpeg_error_mgr object. + * Typical call is: + * struct jpeg_compress_struct cinfo; + * struct jpeg_error_mgr err; + * + * cinfo.err = jpeg_std_error(&err); + * after which the application may override some of the methods. + */ + +GLOBAL(struct jpeg_error_mgr *) +jpeg_std_error (struct jpeg_error_mgr * err) +{ + err->error_exit = error_exit; + err->emit_message = emit_message; + err->output_message = output_message; + err->format_message = format_message; + err->reset_error_mgr = reset_error_mgr; + + err->trace_level = 0; /* default = no tracing */ + err->num_warnings = 0; /* no warnings emitted yet */ + err->msg_code = 0; /* may be useful as a flag for "no error" */ + + /* Initialize message table pointers */ + err->jpeg_message_table = jpeg_std_message_table; + err->last_jpeg_message = (int) JMSG_LASTMSGCODE - 1; + + err->addon_message_table = NULL; + err->first_addon_message = 0; /* for safety */ + err->last_addon_message = 0; + + return err; +} diff --git a/src/3rdparty/libjpeg/jerror.h b/src/3rdparty/libjpeg/jerror.h new file mode 100644 index 0000000..1cfb2b1 --- /dev/null +++ b/src/3rdparty/libjpeg/jerror.h @@ -0,0 +1,304 @@ +/* + * jerror.h + * + * Copyright (C) 1994-1997, Thomas G. Lane. + * Modified 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the error and message codes for the JPEG library. + * Edit this file to add new codes, or to translate the message strings to + * some other language. + * A set of error-reporting macros are defined too. Some applications using + * the JPEG library may wish to include this file to get the error codes + * and/or the macros. + */ + +/* + * To define the enum list of message codes, include this file without + * defining macro JMESSAGE. To create a message string table, include it + * again with a suitable JMESSAGE definition (see jerror.c for an example). + */ +#ifndef JMESSAGE +#ifndef JERROR_H +/* First time through, define the enum list */ +#define JMAKE_ENUM_LIST +#else +/* Repeated inclusions of this file are no-ops unless JMESSAGE is defined */ +#define JMESSAGE(code,string) +#endif /* JERROR_H */ +#endif /* JMESSAGE */ + +#ifdef JMAKE_ENUM_LIST + +typedef enum { + +#define JMESSAGE(code,string) code , + +#endif /* JMAKE_ENUM_LIST */ + +JMESSAGE(JMSG_NOMESSAGE, "Bogus message code %d") /* Must be first entry! */ + +/* For maintenance convenience, list is alphabetical by message code name */ +JMESSAGE(JERR_BAD_ALIGN_TYPE, "ALIGN_TYPE is wrong, please fix") +JMESSAGE(JERR_BAD_ALLOC_CHUNK, "MAX_ALLOC_CHUNK is wrong, please fix") +JMESSAGE(JERR_BAD_BUFFER_MODE, "Bogus buffer control mode") +JMESSAGE(JERR_BAD_COMPONENT_ID, "Invalid component ID %d in SOS") +JMESSAGE(JERR_BAD_CROP_SPEC, "Invalid crop request") +JMESSAGE(JERR_BAD_DCT_COEF, "DCT coefficient out of range") +JMESSAGE(JERR_BAD_DCTSIZE, "DCT scaled block size %dx%d not supported") +JMESSAGE(JERR_BAD_DROP_SAMPLING, + "Component index %d: mismatching sampling ratio %d:%d, %d:%d, %c") +JMESSAGE(JERR_BAD_HUFF_TABLE, "Bogus Huffman table definition") +JMESSAGE(JERR_BAD_IN_COLORSPACE, "Bogus input colorspace") +JMESSAGE(JERR_BAD_J_COLORSPACE, "Bogus JPEG colorspace") +JMESSAGE(JERR_BAD_LENGTH, "Bogus marker length") +JMESSAGE(JERR_BAD_LIB_VERSION, + "Wrong JPEG library version: library is %d, caller expects %d") +JMESSAGE(JERR_BAD_MCU_SIZE, "Sampling factors too large for interleaved scan") +JMESSAGE(JERR_BAD_POOL_ID, "Invalid memory pool code %d") +JMESSAGE(JERR_BAD_PRECISION, "Unsupported JPEG data precision %d") +JMESSAGE(JERR_BAD_PROGRESSION, + "Invalid progressive parameters Ss=%d Se=%d Ah=%d Al=%d") +JMESSAGE(JERR_BAD_PROG_SCRIPT, + "Invalid progressive parameters at scan script entry %d") +JMESSAGE(JERR_BAD_SAMPLING, "Bogus sampling factors") +JMESSAGE(JERR_BAD_SCAN_SCRIPT, "Invalid scan script at entry %d") +JMESSAGE(JERR_BAD_STATE, "Improper call to JPEG library in state %d") +JMESSAGE(JERR_BAD_STRUCT_SIZE, + "JPEG parameter struct mismatch: library thinks size is %u, caller expects %u") +JMESSAGE(JERR_BAD_VIRTUAL_ACCESS, "Bogus virtual array access") +JMESSAGE(JERR_BUFFER_SIZE, "Buffer passed to JPEG library is too small") +JMESSAGE(JERR_CANT_SUSPEND, "Suspension not allowed here") +JMESSAGE(JERR_CCIR601_NOTIMPL, "CCIR601 sampling not implemented yet") +JMESSAGE(JERR_COMPONENT_COUNT, "Too many color components: %d, max %d") +JMESSAGE(JERR_CONVERSION_NOTIMPL, "Unsupported color conversion request") +JMESSAGE(JERR_DAC_INDEX, "Bogus DAC index %d") +JMESSAGE(JERR_DAC_VALUE, "Bogus DAC value 0x%x") +JMESSAGE(JERR_DHT_INDEX, "Bogus DHT index %d") +JMESSAGE(JERR_DQT_INDEX, "Bogus DQT index %d") +JMESSAGE(JERR_EMPTY_IMAGE, "Empty JPEG image (DNL not supported)") +JMESSAGE(JERR_EMS_READ, "Read from EMS failed") +JMESSAGE(JERR_EMS_WRITE, "Write to EMS failed") +JMESSAGE(JERR_EOI_EXPECTED, "Didn't expect more than one scan") +JMESSAGE(JERR_FILE_READ, "Input file read error") +JMESSAGE(JERR_FILE_WRITE, "Output file write error --- out of disk space?") +JMESSAGE(JERR_FRACT_SAMPLE_NOTIMPL, "Fractional sampling not implemented yet") +JMESSAGE(JERR_HUFF_CLEN_OVERFLOW, "Huffman code size table overflow") +JMESSAGE(JERR_HUFF_MISSING_CODE, "Missing Huffman code table entry") +JMESSAGE(JERR_IMAGE_TOO_BIG, "Maximum supported image dimension is %u pixels") +JMESSAGE(JERR_INPUT_EMPTY, "Empty input file") +JMESSAGE(JERR_INPUT_EOF, "Premature end of input file") +JMESSAGE(JERR_MISMATCHED_QUANT_TABLE, + "Cannot transcode due to multiple use of quantization table %d") +JMESSAGE(JERR_MISSING_DATA, "Scan script does not transmit all data") +JMESSAGE(JERR_MODE_CHANGE, "Invalid color quantization mode change") +JMESSAGE(JERR_NOTIMPL, "Not implemented yet") +JMESSAGE(JERR_NOT_COMPILED, "Requested feature was omitted at compile time") +JMESSAGE(JERR_NO_ARITH_TABLE, "Arithmetic table 0x%02x was not defined") +JMESSAGE(JERR_NO_BACKING_STORE, "Backing store not supported") +JMESSAGE(JERR_NO_HUFF_TABLE, "Huffman table 0x%02x was not defined") +JMESSAGE(JERR_NO_IMAGE, "JPEG datastream contains no image") +JMESSAGE(JERR_NO_QUANT_TABLE, "Quantization table 0x%02x was not defined") +JMESSAGE(JERR_NO_SOI, "Not a JPEG file: starts with 0x%02x 0x%02x") +JMESSAGE(JERR_OUT_OF_MEMORY, "Insufficient memory (case %d)") +JMESSAGE(JERR_QUANT_COMPONENTS, + "Cannot quantize more than %d color components") +JMESSAGE(JERR_QUANT_FEW_COLORS, "Cannot quantize to fewer than %d colors") +JMESSAGE(JERR_QUANT_MANY_COLORS, "Cannot quantize to more than %d colors") +JMESSAGE(JERR_SOF_DUPLICATE, "Invalid JPEG file structure: two SOF markers") +JMESSAGE(JERR_SOF_NO_SOS, "Invalid JPEG file structure: missing SOS marker") +JMESSAGE(JERR_SOF_UNSUPPORTED, "Unsupported JPEG process: SOF type 0x%02x") +JMESSAGE(JERR_SOI_DUPLICATE, "Invalid JPEG file structure: two SOI markers") +JMESSAGE(JERR_SOS_NO_SOF, "Invalid JPEG file structure: SOS before SOF") +JMESSAGE(JERR_TFILE_CREATE, "Failed to create temporary file %s") +JMESSAGE(JERR_TFILE_READ, "Read failed on temporary file") +JMESSAGE(JERR_TFILE_SEEK, "Seek failed on temporary file") +JMESSAGE(JERR_TFILE_WRITE, + "Write failed on temporary file --- out of disk space?") +JMESSAGE(JERR_TOO_LITTLE_DATA, "Application transferred too few scanlines") +JMESSAGE(JERR_UNKNOWN_MARKER, "Unsupported marker type 0x%02x") +JMESSAGE(JERR_VIRTUAL_BUG, "Virtual array controller messed up") +JMESSAGE(JERR_WIDTH_OVERFLOW, "Image too wide for this implementation") +JMESSAGE(JERR_XMS_READ, "Read from XMS failed") +JMESSAGE(JERR_XMS_WRITE, "Write to XMS failed") +JMESSAGE(JMSG_COPYRIGHT, JCOPYRIGHT) +JMESSAGE(JMSG_VERSION, JVERSION) +JMESSAGE(JTRC_16BIT_TABLES, + "Caution: quantization tables are too coarse for baseline JPEG") +JMESSAGE(JTRC_ADOBE, + "Adobe APP14 marker: version %d, flags 0x%04x 0x%04x, transform %d") +JMESSAGE(JTRC_APP0, "Unknown APP0 marker (not JFIF), length %u") +JMESSAGE(JTRC_APP14, "Unknown APP14 marker (not Adobe), length %u") +JMESSAGE(JTRC_DAC, "Define Arithmetic Table 0x%02x: 0x%02x") +JMESSAGE(JTRC_DHT, "Define Huffman Table 0x%02x") +JMESSAGE(JTRC_DQT, "Define Quantization Table %d precision %d") +JMESSAGE(JTRC_DRI, "Define Restart Interval %u") +JMESSAGE(JTRC_EMS_CLOSE, "Freed EMS handle %u") +JMESSAGE(JTRC_EMS_OPEN, "Obtained EMS handle %u") +JMESSAGE(JTRC_EOI, "End Of Image") +JMESSAGE(JTRC_HUFFBITS, " %3d %3d %3d %3d %3d %3d %3d %3d") +JMESSAGE(JTRC_JFIF, "JFIF APP0 marker: version %d.%02d, density %dx%d %d") +JMESSAGE(JTRC_JFIF_BADTHUMBNAILSIZE, + "Warning: thumbnail image size does not match data length %u") +JMESSAGE(JTRC_JFIF_EXTENSION, + "JFIF extension marker: type 0x%02x, length %u") +JMESSAGE(JTRC_JFIF_THUMBNAIL, " with %d x %d thumbnail image") +JMESSAGE(JTRC_MISC_MARKER, "Miscellaneous marker 0x%02x, length %u") +JMESSAGE(JTRC_PARMLESS_MARKER, "Unexpected marker 0x%02x") +JMESSAGE(JTRC_QUANTVALS, " %4u %4u %4u %4u %4u %4u %4u %4u") +JMESSAGE(JTRC_QUANT_3_NCOLORS, "Quantizing to %d = %d*%d*%d colors") +JMESSAGE(JTRC_QUANT_NCOLORS, "Quantizing to %d colors") +JMESSAGE(JTRC_QUANT_SELECTED, "Selected %d colors for quantization") +JMESSAGE(JTRC_RECOVERY_ACTION, "At marker 0x%02x, recovery action %d") +JMESSAGE(JTRC_RST, "RST%d") +JMESSAGE(JTRC_SMOOTH_NOTIMPL, + "Smoothing not supported with nonstandard sampling ratios") +JMESSAGE(JTRC_SOF, "Start Of Frame 0x%02x: width=%u, height=%u, components=%d") +JMESSAGE(JTRC_SOF_COMPONENT, " Component %d: %dhx%dv q=%d") +JMESSAGE(JTRC_SOI, "Start of Image") +JMESSAGE(JTRC_SOS, "Start Of Scan: %d components") +JMESSAGE(JTRC_SOS_COMPONENT, " Component %d: dc=%d ac=%d") +JMESSAGE(JTRC_SOS_PARAMS, " Ss=%d, Se=%d, Ah=%d, Al=%d") +JMESSAGE(JTRC_TFILE_CLOSE, "Closed temporary file %s") +JMESSAGE(JTRC_TFILE_OPEN, "Opened temporary file %s") +JMESSAGE(JTRC_THUMB_JPEG, + "JFIF extension marker: JPEG-compressed thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_PALETTE, + "JFIF extension marker: palette thumbnail image, length %u") +JMESSAGE(JTRC_THUMB_RGB, + "JFIF extension marker: RGB thumbnail image, length %u") +JMESSAGE(JTRC_UNKNOWN_IDS, + "Unrecognized component IDs %d %d %d, assuming YCbCr") +JMESSAGE(JTRC_XMS_CLOSE, "Freed XMS handle %u") +JMESSAGE(JTRC_XMS_OPEN, "Obtained XMS handle %u") +JMESSAGE(JWRN_ADOBE_XFORM, "Unknown Adobe color transform code %d") +JMESSAGE(JWRN_ARITH_BAD_CODE, "Corrupt JPEG data: bad arithmetic code") +JMESSAGE(JWRN_BOGUS_PROGRESSION, + "Inconsistent progression sequence for component %d coefficient %d") +JMESSAGE(JWRN_EXTRANEOUS_DATA, + "Corrupt JPEG data: %u extraneous bytes before marker 0x%02x") +JMESSAGE(JWRN_HIT_MARKER, "Corrupt JPEG data: premature end of data segment") +JMESSAGE(JWRN_HUFF_BAD_CODE, "Corrupt JPEG data: bad Huffman code") +JMESSAGE(JWRN_JFIF_MAJOR, "Warning: unknown JFIF revision number %d.%02d") +JMESSAGE(JWRN_JPEG_EOF, "Premature end of JPEG file") +JMESSAGE(JWRN_MUST_RESYNC, + "Corrupt JPEG data: found marker 0x%02x instead of RST%d") +JMESSAGE(JWRN_NOT_SEQUENTIAL, "Invalid SOS parameters for sequential JPEG") +JMESSAGE(JWRN_TOO_MUCH_DATA, "Application transferred too many scanlines") + +#ifdef JMAKE_ENUM_LIST + + JMSG_LASTMSGCODE +} J_MESSAGE_CODE; + +#undef JMAKE_ENUM_LIST +#endif /* JMAKE_ENUM_LIST */ + +/* Zap JMESSAGE macro so that future re-inclusions do nothing by default */ +#undef JMESSAGE + + +#ifndef JERROR_H +#define JERROR_H + +/* Macros to simplify using the error and trace message stuff */ +/* The first parameter is either type of cinfo pointer */ + +/* Fatal errors (print message and exit) */ +#define ERREXIT(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT3(cinfo,code,p1,p2,p3) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT4(cinfo,code,p1,p2,p3,p4) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXIT6(cinfo,code,p1,p2,p3,p4,p5,p6) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (cinfo)->err->msg_parm.i[2] = (p3), \ + (cinfo)->err->msg_parm.i[3] = (p4), \ + (cinfo)->err->msg_parm.i[4] = (p5), \ + (cinfo)->err->msg_parm.i[5] = (p6), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) +#define ERREXITS(cinfo,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->error_exit) ((j_common_ptr) (cinfo))) + +#define MAKESTMT(stuff) do { stuff } while (0) + +/* Nonfatal errors (we can keep going, but the data is probably corrupt) */ +#define WARNMS(cinfo,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS1(cinfo,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) +#define WARNMS2(cinfo,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), -1)) + +/* Informational/debugging messages */ +#define TRACEMS(cinfo,lvl,code) \ + ((cinfo)->err->msg_code = (code), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS1(cinfo,lvl,code,p1) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS2(cinfo,lvl,code,p1,p2) \ + ((cinfo)->err->msg_code = (code), \ + (cinfo)->err->msg_parm.i[0] = (p1), \ + (cinfo)->err->msg_parm.i[1] = (p2), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) +#define TRACEMS3(cinfo,lvl,code,p1,p2,p3) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS4(cinfo,lvl,code,p1,p2,p3,p4) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS5(cinfo,lvl,code,p1,p2,p3,p4,p5) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMS8(cinfo,lvl,code,p1,p2,p3,p4,p5,p6,p7,p8) \ + MAKESTMT(int * _mp = (cinfo)->err->msg_parm.i; \ + _mp[0] = (p1); _mp[1] = (p2); _mp[2] = (p3); _mp[3] = (p4); \ + _mp[4] = (p5); _mp[5] = (p6); _mp[6] = (p7); _mp[7] = (p8); \ + (cinfo)->err->msg_code = (code); \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl)); ) +#define TRACEMSS(cinfo,lvl,code,str) \ + ((cinfo)->err->msg_code = (code), \ + strncpy((cinfo)->err->msg_parm.s, (str), JMSG_STR_PARM_MAX), \ + (*(cinfo)->err->emit_message) ((j_common_ptr) (cinfo), (lvl))) + +#endif /* JERROR_H */ diff --git a/src/3rdparty/libjpeg/jfdctflt.c b/src/3rdparty/libjpeg/jfdctflt.c new file mode 100644 index 0000000..74d0d86 --- /dev/null +++ b/src/3rdparty/libjpeg/jfdctflt.c @@ -0,0 +1,174 @@ +/* + * jfdctflt.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * forward DCT (Discrete Cosine Transform). + * + * This implementation should be more accurate than either of the integer + * DCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_float (FAST_FLOAT * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z1, z2, z3, z4, z5, z11, z13; + FAST_FLOAT *dataptr; + JSAMPROW elemptr; + int ctr; + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7])); + tmp7 = (FAST_FLOAT) (GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7])); + tmp1 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6])); + tmp6 = (FAST_FLOAT) (GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6])); + tmp2 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5])); + tmp5 = (FAST_FLOAT) (GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5])); + tmp3 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4])); + tmp4 = (FAST_FLOAT) (GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4])); + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Apply unsigned->signed conversion */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = (tmp12 + tmp13) * ((FAST_FLOAT) 0.707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = (tmp10 - tmp12) * ((FAST_FLOAT) 0.382683433); /* c6 */ + z2 = ((FAST_FLOAT) 0.541196100) * tmp10 + z5; /* c2-c6 */ + z4 = ((FAST_FLOAT) 1.306562965) * tmp12 + z5; /* c2+c6 */ + z3 = tmp11 * ((FAST_FLOAT) 0.707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jfdctfst.c b/src/3rdparty/libjpeg/jfdctfst.c new file mode 100644 index 0000000..8cad5f2 --- /dev/null +++ b/src/3rdparty/libjpeg/jfdctfst.c @@ -0,0 +1,230 @@ +/* + * jfdctfst.c + * + * Copyright (C) 1994-1996, Thomas G. Lane. + * Modified 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jfdctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * Again to save a few shifts, the intermediate results between pass 1 and + * pass 2 are not upscaled, but are represented only to integral precision. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#define CONST_BITS 8 + + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_0_382683433 ((INT32) 98) /* FIX(0.382683433) */ +#define FIX_0_541196100 ((INT32) 139) /* FIX(0.541196100) */ +#define FIX_0_707106781 ((INT32) 181) /* FIX(0.707106781) */ +#define FIX_1_306562965 ((INT32) 334) /* FIX(1.306562965) */ +#else +#define FIX_0_382683433 FIX(0.382683433) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_707106781 FIX(0.707106781) +#define FIX_1_306562965 FIX(1.306562965) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_ifast (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z1, z2, z3, z4, z5, z11, z13; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Load data into workspace */ + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp7 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp6 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp5 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + tmp4 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + /* Apply unsigned->signed conversion */ + dataptr[0] = tmp10 + tmp11 - 8 * CENTERJSAMPLE; /* phase 3 */ + dataptr[4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[2] = tmp13 + z1; /* phase 5 */ + dataptr[6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[5] = z13 + z2; /* phase 6 */ + dataptr[3] = z13 - z2; + dataptr[1] = z11 + z4; + dataptr[7] = z11 - z4; + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp7 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp6 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp5 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + /* Even part */ + + tmp10 = tmp0 + tmp3; /* phase 2 */ + tmp13 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp1 - tmp2; + + dataptr[DCTSIZE*0] = tmp10 + tmp11; /* phase 3 */ + dataptr[DCTSIZE*4] = tmp10 - tmp11; + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_707106781); /* c4 */ + dataptr[DCTSIZE*2] = tmp13 + z1; /* phase 5 */ + dataptr[DCTSIZE*6] = tmp13 - z1; + + /* Odd part */ + + tmp10 = tmp4 + tmp5; /* phase 2 */ + tmp11 = tmp5 + tmp6; + tmp12 = tmp6 + tmp7; + + /* The rotator is modified from fig 4-8 to avoid extra negations. */ + z5 = MULTIPLY(tmp10 - tmp12, FIX_0_382683433); /* c6 */ + z2 = MULTIPLY(tmp10, FIX_0_541196100) + z5; /* c2-c6 */ + z4 = MULTIPLY(tmp12, FIX_1_306562965) + z5; /* c2+c6 */ + z3 = MULTIPLY(tmp11, FIX_0_707106781); /* c4 */ + + z11 = tmp7 + z3; /* phase 5 */ + z13 = tmp7 - z3; + + dataptr[DCTSIZE*5] = z13 + z2; /* phase 6 */ + dataptr[DCTSIZE*3] = z13 - z2; + dataptr[DCTSIZE*1] = z11 + z4; + dataptr[DCTSIZE*7] = z11 - z4; + + dataptr++; /* advance pointer to next column */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jfdctint.c b/src/3rdparty/libjpeg/jfdctint.c new file mode 100644 index 0000000..1dde58c --- /dev/null +++ b/src/3rdparty/libjpeg/jfdctint.c @@ -0,0 +1,4348 @@ +/* + * jfdctint.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modification developed 2003-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * forward DCT (Discrete Cosine Transform). + * + * A 2-D DCT can be done by 1-D DCT on each row followed by 1-D DCT + * on each column. Direct algorithms are also available, but they are + * much more complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide FDCT routines with various input sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 output DCT block. + * + * For N<8 we fill the remaining block coefficients with zero. + * For N>8 we apply a partial N-point FDCT on the input samples, computing + * just the lower 8 frequency coefficients and discarding the rest. + * + * We must scale the output coefficients of the N-point FDCT appropriately + * to the standard 8-point FDCT level by 8/N per 1-D pass. This scaling + * is folded into the constant multipliers (pass 2) and/or final/initial + * shifting. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D DCT step produces outputs which are a factor of sqrt(N) + * larger than the true DCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D DCT, + * because the y0 and y4 outputs need not be divided by sqrt(N). + * In the IJG code, this factor of 8 is removed by the quantization step + * (in jcdctmgr.c), NOT in this module. + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (For 12-bit sample data, the intermediate + * array is INT32 anyway.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* + * Perform the forward DCT on one block of samples. + */ + +GLOBAL(void) +jpeg_fdct_islow (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + +#ifdef DCT_SCALING_SUPPORTED + + +/* + * Perform the forward DCT on a 7x7 sample block. + */ + +GLOBAL(void) +jpeg_fdct_7x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* cK represents sqrt(2) * cos(K*pi/14). */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)**2 = 64/49, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x6 sample block. + */ + +GLOBAL(void) +jpeg_fdct_6x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* cK represents sqrt(2) * cos(K*pi/12). */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)**2 = 16/9, which we fold + * into the constant multipliers: + * cK now represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x5 sample block. + */ + +GLOBAL(void) +jpeg_fdct_5x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/10). */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << (PASS1_BITS+1)); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)**2 = 64/25, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x4 sample block. + */ + +GLOBAL(void) +jpeg_fdct_4x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by (8/4)**2 = 2**2, which we add here. */ + /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+2)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-3); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-2); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x3 sample block. + */ + +GLOBAL(void) +jpeg_fdct_3x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2**2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/6). */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+2)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-2); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-2); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/3)**2 = 64/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * cK now represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x2 sample block. + */ + +GLOBAL(void) +jpeg_fdct_2x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + + /* Row 0 */ + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp1 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Row 1 */ + elemptr = sample_data[1] + start_col; + + tmp2 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[1]); + tmp3 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[1]); + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)**2 = 2**4. + */ + + /* Column 0 */ + /* Apply unsigned->signed conversion */ + data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp2 - 4 * CENTERJSAMPLE) << 4); + data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp2) << 4); + + /* Column 1 */ + data[DCTSIZE*0+1] = (DCTELEM) ((tmp1 + tmp3) << 4); + data[DCTSIZE*1+1] = (DCTELEM) ((tmp1 - tmp3) << 4); +} + + +/* + * Perform the forward DCT on a 1x1 sample block. + */ + +GLOBAL(void) +jpeg_fdct_1x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* We leave the result scaled up by an overall factor of 8. */ + /* We must also scale the output by (8/1)**2 = 2**6. */ + /* Apply unsigned->signed conversion */ + data[0] = (DCTELEM) + ((GETJSAMPLE(sample_data[0][start_col]) - CENTERJSAMPLE) << 6); +} + + +/* + * Perform the forward DCT on a 9x9 sample block. + */ + +GLOBAL(void) +jpeg_fdct_9x9 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2; + DCTELEM workspace[8]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* we scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/18). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[8]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[7]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[6]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[5]); + tmp4 = GETJSAMPLE(elemptr[4]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[8]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[7]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[6]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[5]); + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((z1 + z2 - 9 * CENTERJSAMPLE) << 1); + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(0.707106781)), /* c6 */ + CONST_BITS-1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.328926049)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(0.707106781)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.083350441)) /* c4 */ + + z1 + z2, CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.245575608)) /* c8 */ + + z1 - z2, CONST_BITS-1); + + /* Odd part */ + + dataptr[3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.224744871)), /* c3 */ + CONST_BITS-1); + + tmp11 = MULTIPLY(tmp11, FIX(1.224744871)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(0.909038955)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.483689525)); /* c7 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS-1); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(1.392728481)); /* c1 */ + + dataptr[5] = (DCTELEM) DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 9) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/9)**2 = 64/81, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/18) * 128/81. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*0]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*7]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*6]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*5]; + tmp4 = dataptr[DCTSIZE*4]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*0]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*7]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*6]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*5]; + + z1 = tmp0 + tmp2 + tmp3; + z2 = tmp1 + tmp4; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2, FIX(1.580246914)), /* 128/81 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z2 - z2, FIX(1.117403309)), /* c6 */ + CONST_BITS+2); + z1 = MULTIPLY(tmp0 - tmp2, FIX(2.100031287)); /* c2 */ + z2 = MULTIPLY(tmp1 - tmp4 - tmp4, FIX(1.117403309)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp2 - tmp3, FIX(1.711961190)) /* c4 */ + + z1 + z2, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp3 - tmp0, FIX(0.388070096)) /* c8 */ + + z1 - z2, CONST_BITS+2); + + /* Odd part */ + + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12 - tmp13, FIX(1.935399303)), /* c3 */ + CONST_BITS+2); + + tmp11 = MULTIPLY(tmp11, FIX(1.935399303)); /* c3 */ + tmp0 = MULTIPLY(tmp10 + tmp12, FIX(1.436506004)); /* c5 */ + tmp1 = MULTIPLY(tmp10 + tmp13, FIX(0.764348879)); /* c7 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp0 + tmp1, CONST_BITS+2); + + tmp2 = MULTIPLY(tmp12 - tmp13, FIX(2.200854883)); /* c1 */ + + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp0 - tmp11 - tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(tmp1 - tmp11 + tmp2, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x10 sample block. + */ + +GLOBAL(void) +jpeg_fdct_10x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* we scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/20). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << 1); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-1); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-1); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << 1); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-1); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/10)**2 = 16/25, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+2); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+2); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+2); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+2); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 11x11 sample block. + */ + +GLOBAL(void) +jpeg_fdct_11x11 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3; + DCTELEM workspace[8*3]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* we scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* cK represents sqrt(2) * cos(K*pi/22). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[10]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[9]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[8]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[7]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[6]); + tmp5 = GETJSAMPLE(elemptr[5]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[10]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[9]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[8]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[7]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 - 11 * CENTERJSAMPLE) << 1); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.356927976)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.201263574)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.926112931)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.189712156)); /* c4 */ + dataptr[2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.018300590)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.390975730)), /* c4+c10 */ + CONST_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.062335650)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.356927976)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.587485545)), /* c8 */ + CONST_BITS-1); + dataptr[6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.620527200)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.788749120)), /* c8+c10 */ + CONST_BITS-1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.286413905)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.068791298)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.764581576)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.719967871)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.398430003)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.764581576)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.399818907)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.276416582)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.068791298)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.398430003)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(1.989053629)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.399818907)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.305598626)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.286413905)); /* c3 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-1); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-1); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-1); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS-1); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 11) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/11)**2 = 64/121, which we partially + * fold into the constant multipliers and final/initial shifting: + * cK now represents sqrt(2) * cos(K*pi/22) * 128/121. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*1]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*0]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*7]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*6]; + tmp5 = dataptr[DCTSIZE*5]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*2]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*1]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*0]; + tmp13 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*7]; + tmp14 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5, + FIX(1.057851240)), /* 128/121 */ + CONST_BITS+2); + tmp5 += tmp5; + tmp0 -= tmp5; + tmp1 -= tmp5; + tmp2 -= tmp5; + tmp3 -= tmp5; + tmp4 -= tmp5; + z1 = MULTIPLY(tmp0 + tmp3, FIX(1.435427942)) + /* c2 */ + MULTIPLY(tmp2 + tmp4, FIX(0.212906922)); /* c10 */ + z2 = MULTIPLY(tmp1 - tmp3, FIX(0.979689713)); /* c6 */ + z3 = MULTIPLY(tmp0 - tmp1, FIX(1.258538479)); /* c4 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(z1 + z2 - MULTIPLY(tmp3, FIX(1.077210542)) /* c2+c8-c6 */ + - MULTIPLY(tmp4, FIX(1.471445400)), /* c4+c10 */ + CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 + MULTIPLY(tmp1, FIX(0.065941844)) /* c4-c6-c10 */ + - MULTIPLY(tmp2, FIX(1.435427942)) /* c2 */ + + MULTIPLY(tmp4, FIX(0.621472312)), /* c8 */ + CONST_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(z1 + z3 - MULTIPLY(tmp0, FIX(1.714276708)) /* c2+c4-c6 */ + - MULTIPLY(tmp2, FIX(0.834379234)), /* c8+c10 */ + CONST_BITS+2); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.360834544)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.130622199)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.808813568)); /* c7 */ + tmp0 = tmp1 + tmp2 + tmp3 - MULTIPLY(tmp10, FIX(1.819470145)) /* c7+c5+c3-c1 */ + + MULTIPLY(tmp14, FIX(0.421479672)); /* c9 */ + tmp4 = MULTIPLY(tmp11 + tmp12, - FIX(0.808813568)); /* -c7 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.480800167)); /* -c1 */ + tmp1 += tmp4 + tmp5 + MULTIPLY(tmp11, FIX(1.350258864)) /* c9+c7+c1-c3 */ + - MULTIPLY(tmp14, FIX(1.130622199)); /* c5 */ + tmp10 = MULTIPLY(tmp12 + tmp13, FIX(0.421479672)); /* c9 */ + tmp2 += tmp4 + tmp10 - MULTIPLY(tmp12, FIX(2.104122847)) /* c9+c5+c3-c7 */ + + MULTIPLY(tmp14, FIX(1.480800167)); /* c1 */ + tmp3 += tmp5 + tmp10 + MULTIPLY(tmp13, FIX(1.381129125)) /* c1+c5-c9-c7 */ + - MULTIPLY(tmp14, FIX(1.360834544)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x12 sample block. + */ + +GLOBAL(void) +jpeg_fdct_12x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/24). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) (tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE); + dataptr[6] = (DCTELEM) (tmp13 - tmp14 - tmp15); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/12)**2 = 4/9, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 13x13 sample block. + */ + +GLOBAL(void) +jpeg_fdct_13x13 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 z1, z2; + DCTELEM workspace[8*5]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/26). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[12]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[11]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[10]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[9]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[8]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[7]); + tmp6 = GETJSAMPLE(elemptr[6]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[12]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[11]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[10]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[9]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[8]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + (tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6 - 13 * CENTERJSAMPLE); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.373119086)) + /* c2 */ + MULTIPLY(tmp1, FIX(1.058554052)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.501487041)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.170464608)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.803364869)) - /* c8 */ + MULTIPLY(tmp5, FIX(1.252223920)), /* c4 */ + CONST_BITS); + z1 = MULTIPLY(tmp0 - tmp2, FIX(1.155388986)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.435816023)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.316450131)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.096834934)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.937303064)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.486914739)); /* (c8+c12)/2 */ + + dataptr[4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.322312651)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(1.163874945)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.937797057)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.338443458)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(2.020082300)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.318774355)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.937797057)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.338443458)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(1.163874945)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.837223564)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(2.341699410)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.657217813)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.572116027)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(2.260109708)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(2.205608352)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.742345811)); /* c1+c11 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 13) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/13)**2 = 64/169, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/26) * 128/169. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*2]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*1]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*0]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*7]; + tmp6 = dataptr[DCTSIZE*6]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*4]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*3]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*2]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*1]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*0]; + tmp15 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1 + tmp2 + tmp3 + tmp4 + tmp5 + tmp6, + FIX(0.757396450)), /* 128/169 */ + CONST_BITS+1); + tmp6 += tmp6; + tmp0 -= tmp6; + tmp1 -= tmp6; + tmp2 -= tmp6; + tmp3 -= tmp6; + tmp4 -= tmp6; + tmp5 -= tmp6; + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.039995521)) + /* c2 */ + MULTIPLY(tmp1, FIX(0.801745081)) + /* c6 */ + MULTIPLY(tmp2, FIX(0.379824504)) - /* c10 */ + MULTIPLY(tmp3, FIX(0.129109289)) - /* c12 */ + MULTIPLY(tmp4, FIX(0.608465700)) - /* c8 */ + MULTIPLY(tmp5, FIX(0.948429952)), /* c4 */ + CONST_BITS+1); + z1 = MULTIPLY(tmp0 - tmp2, FIX(0.875087516)) - /* (c4+c6)/2 */ + MULTIPLY(tmp3 - tmp4, FIX(0.330085509)) - /* (c2-c10)/2 */ + MULTIPLY(tmp1 - tmp5, FIX(0.239678205)); /* (c8-c12)/2 */ + z2 = MULTIPLY(tmp0 + tmp2, FIX(0.073342435)) - /* (c4-c6)/2 */ + MULTIPLY(tmp3 + tmp4, FIX(0.709910013)) + /* (c2+c10)/2 */ + MULTIPLY(tmp1 + tmp5, FIX(0.368787494)); /* (c8+c12)/2 */ + + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - z2, CONST_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.001514908)); /* c3 */ + tmp2 = MULTIPLY(tmp10 + tmp12, FIX(0.881514751)); /* c5 */ + tmp3 = MULTIPLY(tmp10 + tmp13, FIX(0.710284161)) + /* c7 */ + MULTIPLY(tmp14 + tmp15, FIX(0.256335874)); /* c11 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(tmp10, FIX(1.530003162)) + /* c3+c5+c7-c1 */ + MULTIPLY(tmp14, FIX(0.241438564)); /* c9-c11 */ + tmp4 = MULTIPLY(tmp14 - tmp15, FIX(0.710284161)) - /* c7 */ + MULTIPLY(tmp11 + tmp12, FIX(0.256335874)); /* c11 */ + tmp5 = MULTIPLY(tmp11 + tmp13, - FIX(0.881514751)); /* -c5 */ + tmp1 += tmp4 + tmp5 + + MULTIPLY(tmp11, FIX(0.634110155)) - /* c5+c9+c11-c3 */ + MULTIPLY(tmp14, FIX(1.773594819)); /* c1+c7 */ + tmp6 = MULTIPLY(tmp12 + tmp13, - FIX(0.497774438)); /* -c9 */ + tmp2 += tmp4 + tmp6 - + MULTIPLY(tmp12, FIX(1.190715098)) + /* c1+c5-c9-c11 */ + MULTIPLY(tmp15, FIX(1.711799069)); /* c3+c7 */ + tmp3 += tmp5 + tmp6 + + MULTIPLY(tmp13, FIX(1.670519935)) - /* c3+c5+c9-c7 */ + MULTIPLY(tmp15, FIX(1.319646532)); /* c1+c11 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x14 sample block. + */ + +GLOBAL(void) +jpeg_fdct_14x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/28). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + (tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) (tmp0 - tmp10 + tmp3 - tmp11 - tmp6); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/14)**2 = 16/49, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+1); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+1); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+1); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+1); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+1); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 15x15 sample block. + */ + +GLOBAL(void) +jpeg_fdct_15x15 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*7]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* cK represents sqrt(2) * cos(K*pi/30). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[14]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[13]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[12]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[11]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[10]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[9]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[8]); + tmp7 = GETJSAMPLE(elemptr[7]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[14]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[13]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[12]); + tmp13 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[11]); + tmp14 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[10]); + tmp15 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[9]); + tmp16 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[8]); + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) (z1 + z2 + z3 - 15 * CENTERJSAMPLE); + z3 += z3; + dataptr[6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.144122806)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.437016024)), /* c12 */ + CONST_BITS); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.531135173)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.238241955)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.798468008)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.091361227)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.383309603)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(0.946293579)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.790569415)); /* (c6+c12)/2 */ + + dataptr[2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS); + dataptr[4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.224744871)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.831253876)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.224744871)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.406466353)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.344997024)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.575212477)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.475753014)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.513743148)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.700497885)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.355500862)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.176250899)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.869244010)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3, CONST_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 15) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/15)**2 = 64/225, which we partially + * fold into the constant multipliers and final shifting: + * cK now represents sqrt(2) * cos(K*pi/30) * 256/225. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*3]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*2]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*1]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*0]; + tmp7 = dataptr[DCTSIZE*7]; + + tmp10 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*4]; + tmp13 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*3]; + tmp14 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*2]; + tmp15 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*1]; + tmp16 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*0]; + + z1 = tmp0 + tmp4 + tmp5; + z2 = tmp1 + tmp3 + tmp6; + z3 = tmp2 + tmp7; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + z2 + z3, FIX(1.137777778)), /* 256/225 */ + CONST_BITS+2); + z3 += z3; + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(z1 - z3, FIX(1.301757503)) - /* c6 */ + MULTIPLY(z2 - z3, FIX(0.497227121)), /* c12 */ + CONST_BITS+2); + tmp2 += ((tmp1 + tmp4) >> 1) - tmp7 - tmp7; + z1 = MULTIPLY(tmp3 - tmp2, FIX(1.742091575)) - /* c2+c14 */ + MULTIPLY(tmp6 - tmp2, FIX(2.546621957)); /* c4+c8 */ + z2 = MULTIPLY(tmp5 - tmp2, FIX(0.908479156)) - /* c8-c14 */ + MULTIPLY(tmp0 - tmp2, FIX(0.103948774)); /* c2-c4 */ + z3 = MULTIPLY(tmp0 - tmp3, FIX(1.573898926)) + /* c2 */ + MULTIPLY(tmp6 - tmp5, FIX(1.076671805)) + /* c8 */ + MULTIPLY(tmp1 - tmp4, FIX(0.899492312)); /* (c6+c12)/2 */ + + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z3, CONST_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(z2 + z3, CONST_BITS+2); + + /* Odd part */ + + tmp2 = MULTIPLY(tmp10 - tmp12 - tmp13 + tmp15 + tmp16, + FIX(1.393487498)); /* c5 */ + tmp1 = MULTIPLY(tmp10 - tmp14 - tmp15, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp11 - tmp13 - tmp16, FIX(0.945782187)); /* c9 */ + tmp12 = MULTIPLY(tmp12, FIX(1.393487498)); /* c5 */ + tmp4 = MULTIPLY(tmp10 - tmp16, FIX(1.600246161)) + /* c1 */ + MULTIPLY(tmp11 + tmp14, FIX(1.530307725)) + /* c3 */ + MULTIPLY(tmp13 + tmp15, FIX(0.654463974)); /* c11 */ + tmp0 = MULTIPLY(tmp13, FIX(0.541301207)) - /* c7-c11 */ + MULTIPLY(tmp14, FIX(0.584525538)) + /* c3-c9 */ + MULTIPLY(tmp16, FIX(1.934788705)) + tmp4 + tmp12; /* c1+c13 */ + tmp3 = MULTIPLY(tmp10, - FIX(0.404480980)) - /* -(c1-c7) */ + MULTIPLY(tmp11, FIX(2.476089912)) - /* c3+c9 */ + MULTIPLY(tmp15, FIX(0.989006518)) + tmp4 - tmp12; /* c11+c13 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3, CONST_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x16 sample block. + */ + +GLOBAL(void) +jpeg_fdct_16x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* cK represents sqrt(2) * cos(K*pi/32). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/16)**2 = 1/2**2. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+2); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+2); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+10 */ + CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+2); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+2); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+2); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 16x8 sample block. + * + * 16-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_16x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). */ + + dataptr = data; + ctr = 0; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) + GETJSAMPLE(elemptr[8]); + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[15]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[14]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[13]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[12]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[11]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[10]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[9]); + tmp7 = GETJSAMPLE(elemptr[7]) - GETJSAMPLE(elemptr[8]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 16 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) DESCALE(tmp10 + tmp11, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp10 - tmp11, PASS1_BITS+1); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS+PASS1_BITS+1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, + CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 14x7 sample block. + * + * 14-point FDCT in pass 1 (rows), 7-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_14x7 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero bottom row of output coefficient block. */ + MEMZERO(&data[DCTSIZE*7], SIZEOF(DCTELEM) * DCTSIZE); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28). */ + + dataptr = data; + for (ctr = 0; ctr < 7; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[11]); + tmp13 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) + GETJSAMPLE(elemptr[7]); + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[13]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[12]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[11]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[10]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[9]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[8]); + tmp6 = GETJSAMPLE(elemptr[6]) - GETJSAMPLE(elemptr[7]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 + tmp13 - 14 * CENTERJSAMPLE) << PASS1_BITS); + tmp13 += tmp13; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.274162392)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.314692123)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.881747734)), /* c8 */ + CONST_BITS-PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(1.105676686)); /* c6 */ + + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.273079590)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.613604268)), /* c10 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.719280954)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(1.378756276)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[7] = (DCTELEM) ((tmp0 - tmp10 + tmp3 - tmp11 - tmp6) << PASS1_BITS); + tmp3 <<= CONST_BITS; + tmp10 = MULTIPLY(tmp10, - FIX(0.158341681)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(1.405321284)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(1.197448846)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.752406978)); /* c9 */ + dataptr[5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(2.373959773)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(1.119999435)), /* c1+c11-c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(1.334852607)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.467085129)); /* c11 */ + dataptr[3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.424103948)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(3.069855259)), /* c1+c5+c11 */ + CONST_BITS-PASS1_BITS); + dataptr[1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + tmp6 - + MULTIPLY(tmp0 + tmp6, FIX(1.126980169)), /* c3+c5-c1 */ + CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/14)*(8/7) = 32/49, which we + * partially fold into the constant multipliers and final shifting: + * 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14) * 64/49. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*6]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*5]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*4]; + tmp3 = dataptr[DCTSIZE*3]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*6]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*5]; + tmp12 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*4]; + + z1 = tmp0 + tmp2; + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(z1 + tmp1 + tmp3, FIX(1.306122449)), /* 64/49 */ + CONST_BITS+PASS1_BITS+1); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.461784020)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(1.202428084)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.411026446)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS+PASS1_BITS+1); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(1.151670509)); /* c4 */ + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.923568041)), /* c2+c6-c4 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(1.221765677)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.222383464)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.800824523)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.801442310)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(2.443531355)); /* c3+c1-c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp0, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp1, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp2, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 12x6 sample block. + * + * 12-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_12x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 2 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*6], SIZEOF(DCTELEM) * DCTSIZE * 2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24). */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) + GETJSAMPLE(elemptr[6]); + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[11]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[10]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[9]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[8]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[7]); + tmp5 = GETJSAMPLE(elemptr[5]) - GETJSAMPLE(elemptr[6]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 12 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[6] = (DCTELEM) ((tmp13 - tmp14 - tmp15) << PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.224744871)), /* c4 */ + CONST_BITS-PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(tmp14 - tmp15 + MULTIPLY(tmp13 + tmp15, FIX(1.366025404)), /* c2 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX_0_541196100); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX_0_765366865); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX_1_847759065); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.121971054)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.860918669)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.580774953)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.184591911)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.184591911)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.339493912)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.860918669)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.725788011)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(1.121971054)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.306562965)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX_0_541196100); /* c9 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp10, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp11, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/12)*(8/6) = 8/9, which we + * partially fold into the constant multipliers and final shifting: + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 10x5 sample block. + * + * 10-point FDCT in pass 1 (rows), 5-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_10x5 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 3 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*5], SIZEOF(DCTELEM) * DCTSIZE * 3); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20). */ + + dataptr = data; + for (ctr = 0; ctr < 5; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[8]); + tmp12 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) + GETJSAMPLE(elemptr[5]); + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[9]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[8]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[7]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[6]); + tmp4 = GETJSAMPLE(elemptr[4]) - GETJSAMPLE(elemptr[5]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 + tmp12 - 10 * CENTERJSAMPLE) << PASS1_BITS); + tmp12 += tmp12; + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.144122806)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.437016024)), /* c8 */ + CONST_BITS-PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(0.831253876)); /* c6 */ + dataptr[2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.513743148)), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.176250899)), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[5] = (DCTELEM) ((tmp10 - tmp11 - tmp2) << PASS1_BITS); + tmp2 <<= CONST_BITS; + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.396802247)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.260073511)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.642039522)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.221231742)), /* c9 */ + CONST_BITS-PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(0.951056516)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.587785252)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.309016994)) + /* (c3-c7)/2 */ + (tmp11 << (CONST_BITS - 1)) - tmp2; + dataptr[3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS-PASS1_BITS); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/10)*(8/5) = 32/25, which we + * fold into the constant multipliers: + * 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10) * 32/25. + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*3]; + tmp2 = dataptr[DCTSIZE*2]; + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*4]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(1.011928851)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.452548340)); /* (c2-c4)/2 */ + dataptr[DCTSIZE*2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(1.064004961)); /* c3 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.657591230)), /* c1-c3 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.785601151)), /* c1+c3 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on an 8x4 sample block. + * + * 8-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Zero 4 bottom rows of output coefficient block. */ + MEMZERO(&data[DCTSIZE*4], SIZEOF(DCTELEM) * DCTSIZE * 4); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by 8/4 = 2, which we add here. */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << (PASS1_BITS+1)); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + dataptr[2] = (DCTELEM) RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS-PASS1_BITS-1); + dataptr[6] = (DCTELEM) RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS-PASS1_BITS-1); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-2); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS-1); + dataptr[5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS-1); + dataptr[7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + + dataptr = data; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS+PASS1_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x3 sample block. + * + * 6-point FDCT in pass 1 (rows), 3-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x3 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS-1); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << (PASS1_BITS+1))); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << (PASS1_BITS+1)); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << (PASS1_BITS+1))); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*2]; + tmp1 = dataptr[DCTSIZE*1]; + + tmp2 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(1.257078722)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(2.177324216)), /* c1 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x2 sample block. + * + * 4-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by (8/4)*(8/2) = 2**3, which we add here. */ + /* 4-point FDCT kernel, */ + /* cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+3)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+3)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-4); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-3); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-3); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = dataptr[DCTSIZE*0] + (ONE << (PASS1_BITS-1)); + tmp1 = dataptr[DCTSIZE*1]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp0 + tmp1, PASS1_BITS); + + /* Odd part */ + + dataptr[DCTSIZE*1] = (DCTELEM) RIGHT_SHIFT(tmp0 - tmp1, PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x1 sample block. + * + * 2-point FDCT in pass 1 (rows), 1-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x1 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + JSAMPROW elemptr; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + elemptr = sample_data[0] + start_col; + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/2)*(8/1) = 2**5. + */ + + /* Even part */ + /* Apply unsigned->signed conversion */ + data[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5); + + /* Odd part */ + data[1] = (DCTELEM) ((tmp0 - tmp1) << 5); +} + + +/* + * Perform the forward DCT on an 8x16 sample block. + * + * 8-point FDCT in pass 1 (rows), 16-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_8x16 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16, tmp17; + INT32 z1; + DCTELEM workspace[DCTSIZE2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) + GETJSAMPLE(elemptr[4]); + + tmp10 = tmp0 + tmp3; + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[7]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[6]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[5]); + tmp3 = GETJSAMPLE(elemptr[3]) - GETJSAMPLE(elemptr[4]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((tmp10 + tmp11 - 8 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[4] = (DCTELEM) ((tmp10 - tmp11) << PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + dataptr[2] = (DCTELEM) DESCALE(z1 + MULTIPLY(tmp12, FIX_0_765366865), + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 - MULTIPLY(tmp13, FIX_1_847759065), + CONST_BITS-PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[1] = (DCTELEM) DESCALE(tmp0 + tmp10 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1 + tmp11 + tmp13, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2 + tmp11 + tmp12, CONST_BITS-PASS1_BITS); + dataptr[7] = (DCTELEM) DESCALE(tmp3 + tmp10 + tmp13, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == DCTSIZE * 2) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by 8/16 = 1/2. + * 16-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + + dataptr = data; + wsptr = workspace; + for (ctr = DCTSIZE-1; ctr >= 0; ctr--) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] + wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] + wsptr[DCTSIZE*0]; + + tmp10 = tmp0 + tmp7; + tmp14 = tmp0 - tmp7; + tmp11 = tmp1 + tmp6; + tmp15 = tmp1 - tmp6; + tmp12 = tmp2 + tmp5; + tmp16 = tmp2 - tmp5; + tmp13 = tmp3 + tmp4; + tmp17 = tmp3 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*4]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*3]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*2]; + tmp6 = dataptr[DCTSIZE*6] - wsptr[DCTSIZE*1]; + tmp7 = dataptr[DCTSIZE*7] - wsptr[DCTSIZE*0]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(tmp10 + tmp11 + tmp12 + tmp13, PASS1_BITS+1); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(1.306562965)) + /* c4[16] = c2[8] */ + MULTIPLY(tmp11 - tmp12, FIX_0_541196100), /* c12[16] = c6[8] */ + CONST_BITS+PASS1_BITS+1); + + tmp10 = MULTIPLY(tmp17 - tmp15, FIX(0.275899379)) + /* c14[16] = c7[8] */ + MULTIPLY(tmp14 - tmp16, FIX(1.387039845)); /* c2[16] = c1[8] */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp15, FIX(1.451774982)) /* c6+c14 */ + + MULTIPLY(tmp16, FIX(2.172734804)), /* c2+c10 */ + CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(0.211164243)) /* c2-c6 */ + - MULTIPLY(tmp17, FIX(1.061594338)), /* c10+c14 */ + CONST_BITS+PASS1_BITS+1); + + /* Odd part */ + + tmp11 = MULTIPLY(tmp0 + tmp1, FIX(1.353318001)) + /* c3 */ + MULTIPLY(tmp6 - tmp7, FIX(0.410524528)); /* c13 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(1.247225013)) + /* c5 */ + MULTIPLY(tmp5 + tmp7, FIX(0.666655658)); /* c11 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(1.093201867)) + /* c7 */ + MULTIPLY(tmp4 - tmp7, FIX(0.897167586)); /* c9 */ + tmp14 = MULTIPLY(tmp1 + tmp2, FIX(0.138617169)) + /* c15 */ + MULTIPLY(tmp6 - tmp5, FIX(1.407403738)); /* c1 */ + tmp15 = MULTIPLY(tmp1 + tmp3, - FIX(0.666655658)) + /* -c11 */ + MULTIPLY(tmp4 + tmp6, - FIX(1.247225013)); /* -c5 */ + tmp16 = MULTIPLY(tmp2 + tmp3, - FIX(1.353318001)) + /* -c3 */ + MULTIPLY(tmp5 - tmp4, FIX(0.410524528)); /* c13 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(tmp0, FIX(2.286341144)) + /* c7+c5+c3-c1 */ + MULTIPLY(tmp7, FIX(0.779653625)); /* c15+c13-c11+c9 */ + tmp11 += tmp14 + tmp15 + MULTIPLY(tmp1, FIX(0.071888074)) /* c9-c3-c15+c11 */ + - MULTIPLY(tmp6, FIX(1.663905119)); /* c7+c13+c1-c5 */ + tmp12 += tmp14 + tmp16 - MULTIPLY(tmp2, FIX(1.125726048)) /* c7+c5+c15-c3 */ + + MULTIPLY(tmp5, FIX(1.227391138)); /* c9-c11+c1-c13 */ + tmp13 += tmp15 + tmp16 + MULTIPLY(tmp3, FIX(1.065388962)) /* c15+c3+c11-c7 */ + + MULTIPLY(tmp4, FIX(2.167985692)); /* c1+c13+c5-c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS+1); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS+1); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 7x14 sample block. + * + * 7-point FDCT in pass 1 (rows), 14-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_7x14 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 z1, z2, z3; + DCTELEM workspace[8*6]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 7-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/14). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[6]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[5]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[4]); + tmp3 = GETJSAMPLE(elemptr[3]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[6]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[5]); + tmp12 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[4]); + + z1 = tmp0 + tmp2; + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((z1 + tmp1 + tmp3 - 7 * CENTERJSAMPLE) << PASS1_BITS); + tmp3 += tmp3; + z1 -= tmp3; + z1 -= tmp3; + z1 = MULTIPLY(z1, FIX(0.353553391)); /* (c2+c6-c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp2, FIX(0.920609002)); /* (c2+c4-c6)/2 */ + z3 = MULTIPLY(tmp1 - tmp2, FIX(0.314692123)); /* c6 */ + dataptr[2] = (DCTELEM) DESCALE(z1 + z2 + z3, CONST_BITS-PASS1_BITS); + z1 -= z2; + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.881747734)); /* c4 */ + dataptr[4] = (DCTELEM) + DESCALE(z2 + z3 - MULTIPLY(tmp1 - tmp3, FIX(0.707106781)), /* c2+c6-c4 */ + CONST_BITS-PASS1_BITS); + dataptr[6] = (DCTELEM) DESCALE(z1 + z2, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp1 = MULTIPLY(tmp10 + tmp11, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(tmp10 - tmp11, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(tmp11 + tmp12, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + tmp3 = MULTIPLY(tmp10 + tmp12, FIX(0.613604268)); /* c5 */ + tmp0 += tmp3; + tmp2 += tmp3 + MULTIPLY(tmp12, FIX(1.870828693)); /* c3+c1-c5 */ + + dataptr[1] = (DCTELEM) DESCALE(tmp0, CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) DESCALE(tmp1, CONST_BITS-PASS1_BITS); + dataptr[5] = (DCTELEM) DESCALE(tmp2, CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 14) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/7)*(8/14) = 32/49, which we + * fold into the constant multipliers: + * 14-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/28) * 32/49. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*3]; + tmp13 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] + wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] + wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] + dataptr[DCTSIZE*7]; + + tmp10 = tmp0 + tmp6; + tmp14 = tmp0 - tmp6; + tmp11 = tmp1 + tmp5; + tmp15 = tmp1 - tmp5; + tmp12 = tmp2 + tmp4; + tmp16 = tmp2 - tmp4; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*3]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*2]; + tmp4 = dataptr[DCTSIZE*4] - wsptr[DCTSIZE*1]; + tmp5 = dataptr[DCTSIZE*5] - wsptr[DCTSIZE*0]; + tmp6 = dataptr[DCTSIZE*6] - dataptr[DCTSIZE*7]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12 + tmp13, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp13 += tmp13; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp13, FIX(0.832106052)) + /* c4 */ + MULTIPLY(tmp11 - tmp13, FIX(0.205513223)) - /* c12 */ + MULTIPLY(tmp12 - tmp13, FIX(0.575835255)), /* c8 */ + CONST_BITS+PASS1_BITS); + + tmp10 = MULTIPLY(tmp14 + tmp15, FIX(0.722074570)); /* c6 */ + + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp14, FIX(0.178337691)) /* c2-c6 */ + + MULTIPLY(tmp16, FIX(0.400721155)), /* c10 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp15, FIX(1.122795725)) /* c6+c10 */ + - MULTIPLY(tmp16, FIX(0.900412262)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp1 + tmp2; + tmp11 = tmp5 - tmp4; + dataptr[DCTSIZE*7] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp10 + tmp3 - tmp11 - tmp6, + FIX(0.653061224)), /* 32/49 */ + CONST_BITS+PASS1_BITS); + tmp3 = MULTIPLY(tmp3 , FIX(0.653061224)); /* 32/49 */ + tmp10 = MULTIPLY(tmp10, - FIX(0.103406812)); /* -c13 */ + tmp11 = MULTIPLY(tmp11, FIX(0.917760839)); /* c1 */ + tmp10 += tmp11 - tmp3; + tmp11 = MULTIPLY(tmp0 + tmp2, FIX(0.782007410)) + /* c5 */ + MULTIPLY(tmp4 + tmp6, FIX(0.491367823)); /* c9 */ + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + tmp11 - MULTIPLY(tmp2, FIX(1.550341076)) /* c3+c5-c13 */ + + MULTIPLY(tmp4, FIX(0.731428202)), /* c1+c11-c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 + tmp1, FIX(0.871740478)) + /* c3 */ + MULTIPLY(tmp5 - tmp6, FIX(0.305035186)); /* c11 */ + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(tmp10 + tmp12 - MULTIPLY(tmp1, FIX(0.276965844)) /* c3-c9-c13 */ + - MULTIPLY(tmp5, FIX(2.004803435)), /* c1+c5+c11 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp11 + tmp12 + tmp3 + - MULTIPLY(tmp0, FIX(0.735987049)) /* c3+c5-c1 */ + - MULTIPLY(tmp6, FIX(0.082925825)), /* c9-c11-c13 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 6x12 sample block. + * + * 6-point FDCT in pass 1 (rows), 12-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_6x12 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + DCTELEM workspace[8*4]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[5]); + tmp11 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) + GETJSAMPLE(elemptr[3]); + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[5]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[4]); + tmp2 = GETJSAMPLE(elemptr[2]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp11 - 6 * CENTERJSAMPLE) << PASS1_BITS); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(1.224744871)), /* c2 */ + CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(0.707106781)), /* c4 */ + CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = DESCALE(MULTIPLY(tmp0 + tmp2, FIX(0.366025404)), /* c5 */ + CONST_BITS-PASS1_BITS); + + dataptr[1] = (DCTELEM) (tmp10 + ((tmp0 + tmp1) << PASS1_BITS)); + dataptr[3] = (DCTELEM) ((tmp0 - tmp1 - tmp2) << PASS1_BITS); + dataptr[5] = (DCTELEM) (tmp10 + ((tmp2 - tmp1) << PASS1_BITS)); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 12) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/12) = 8/9, which we + * fold into the constant multipliers: + * 12-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/24) * 8/9. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] + wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] + wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] + dataptr[DCTSIZE*6]; + + tmp10 = tmp0 + tmp5; + tmp13 = tmp0 - tmp5; + tmp11 = tmp1 + tmp4; + tmp14 = tmp1 - tmp4; + tmp12 = tmp2 + tmp3; + tmp15 = tmp2 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*2]; + tmp2 = dataptr[DCTSIZE*2] - wsptr[DCTSIZE*1]; + tmp3 = dataptr[DCTSIZE*3] - wsptr[DCTSIZE*0]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*7]; + tmp5 = dataptr[DCTSIZE*5] - dataptr[DCTSIZE*6]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(MULTIPLY(tmp13 - tmp14 - tmp15, FIX(0.888888889)), /* 8/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.088662108)), /* c4 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp14 - tmp15, FIX(0.888888889)) + /* 8/9 */ + MULTIPLY(tmp13 + tmp15, FIX(1.214244803)), /* c2 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp1 + tmp4, FIX(0.481063200)); /* c9 */ + tmp14 = tmp10 + MULTIPLY(tmp1, FIX(0.680326102)); /* c3-c9 */ + tmp15 = tmp10 - MULTIPLY(tmp4, FIX(1.642452502)); /* c3+c9 */ + tmp12 = MULTIPLY(tmp0 + tmp2, FIX(0.997307603)); /* c5 */ + tmp13 = MULTIPLY(tmp0 + tmp3, FIX(0.765261039)); /* c7 */ + tmp10 = tmp12 + tmp13 + tmp14 - MULTIPLY(tmp0, FIX(0.516244403)) /* c5+c7-c1 */ + + MULTIPLY(tmp5, FIX(0.164081699)); /* c11 */ + tmp11 = MULTIPLY(tmp2 + tmp3, - FIX(0.164081699)); /* -c11 */ + tmp12 += tmp11 - tmp15 - MULTIPLY(tmp2, FIX(2.079550144)) /* c1+c5-c11 */ + + MULTIPLY(tmp5, FIX(0.765261039)); /* c7 */ + tmp13 += tmp11 - tmp14 + MULTIPLY(tmp3, FIX(0.645144899)) /* c1+c11-c7 */ + - MULTIPLY(tmp5, FIX(0.997307603)); /* c5 */ + tmp11 = tmp15 + MULTIPLY(tmp0 - tmp3, FIX(1.161389302)) /* c3 */ + - MULTIPLY(tmp2 + tmp5, FIX(0.481063200)); /* c9 */ + + dataptr[DCTSIZE*1] = (DCTELEM) DESCALE(tmp10, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp11, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) DESCALE(tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 5x10 sample block. + * + * 5-point FDCT in pass 1 (rows), 10-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_5x10 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4; + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + DCTELEM workspace[8*2]; + DCTELEM *dataptr; + DCTELEM *wsptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* 5-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/10). */ + + dataptr = data; + ctr = 0; + for (;;) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[3]); + tmp2 = GETJSAMPLE(elemptr[2]); + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + + tmp0 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[4]); + tmp1 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[3]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp10 + tmp2 - 5 * CENTERJSAMPLE) << PASS1_BITS); + tmp11 = MULTIPLY(tmp11, FIX(0.790569415)); /* (c2+c4)/2 */ + tmp10 -= tmp2 << 2; + tmp10 = MULTIPLY(tmp10, FIX(0.353553391)); /* (c2-c4)/2 */ + dataptr[2] = (DCTELEM) DESCALE(tmp11 + tmp10, CONST_BITS-PASS1_BITS); + dataptr[4] = (DCTELEM) DESCALE(tmp11 - tmp10, CONST_BITS-PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp1, FIX(0.831253876)); /* c3 */ + + dataptr[1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0, FIX(0.513743148)), /* c1-c3 */ + CONST_BITS-PASS1_BITS); + dataptr[3] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp1, FIX(2.176250899)), /* c1+c3 */ + CONST_BITS-PASS1_BITS); + + ctr++; + + if (ctr != DCTSIZE) { + if (ctr == 10) + break; /* Done. */ + dataptr += DCTSIZE; /* advance pointer to next row */ + } else + dataptr = workspace; /* switch pointer to extended workspace */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/5)*(8/10) = 32/25, which we + * fold into the constant multipliers: + * 10-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/20) * 32/25. + */ + + dataptr = data; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] + wsptr[DCTSIZE*0]; + tmp12 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] + dataptr[DCTSIZE*5]; + + tmp10 = tmp0 + tmp4; + tmp13 = tmp0 - tmp4; + tmp11 = tmp1 + tmp3; + tmp14 = tmp1 - tmp3; + + tmp0 = dataptr[DCTSIZE*0] - wsptr[DCTSIZE*1]; + tmp1 = dataptr[DCTSIZE*1] - wsptr[DCTSIZE*0]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*7]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*6]; + tmp4 = dataptr[DCTSIZE*4] - dataptr[DCTSIZE*5]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11 + tmp12, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp12 += tmp12; + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp12, FIX(1.464477191)) - /* c4 */ + MULTIPLY(tmp11 - tmp12, FIX(0.559380511)), /* c8 */ + CONST_BITS+PASS1_BITS); + tmp10 = MULTIPLY(tmp13 + tmp14, FIX(1.064004961)); /* c6 */ + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp13, FIX(0.657591230)), /* c2-c6 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + DESCALE(tmp10 - MULTIPLY(tmp14, FIX(2.785601151)), /* c2+c6 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = tmp0 + tmp4; + tmp11 = tmp1 - tmp3; + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp2, FIX(1.28)), /* 32/25 */ + CONST_BITS+PASS1_BITS); + tmp2 = MULTIPLY(tmp2, FIX(1.28)); /* 32/25 */ + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(MULTIPLY(tmp0, FIX(1.787906876)) + /* c1 */ + MULTIPLY(tmp1, FIX(1.612894094)) + tmp2 + /* c3 */ + MULTIPLY(tmp3, FIX(0.821810588)) + /* c7 */ + MULTIPLY(tmp4, FIX(0.283176630)), /* c9 */ + CONST_BITS+PASS1_BITS); + tmp12 = MULTIPLY(tmp0 - tmp4, FIX(1.217352341)) - /* (c3+c7)/2 */ + MULTIPLY(tmp1 + tmp3, FIX(0.752365123)); /* (c1-c9)/2 */ + tmp13 = MULTIPLY(tmp10 + tmp11, FIX(0.395541753)) + /* (c3-c7)/2 */ + MULTIPLY(tmp11, FIX(0.64)) - tmp2; /* 16/25 */ + dataptr[DCTSIZE*3] = (DCTELEM) DESCALE(tmp12 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) DESCALE(tmp12 - tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + wsptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 4x8 sample block. + * + * 4-point FDCT in pass 1 (rows), 8-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_4x8 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We must also scale the output by 8/4 = 2, which we add here. */ + /* 4-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). */ + + dataptr = data; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[3]); + tmp1 = GETJSAMPLE(elemptr[1]) + GETJSAMPLE(elemptr[2]); + + tmp10 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[3]); + tmp11 = GETJSAMPLE(elemptr[1]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 4 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) ((tmp0 - tmp1) << (PASS1_BITS+1)); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-2); + + dataptr[1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS-1); + dataptr[3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + /* Even part per LL&M figure 1 --- note that published figure is faulty; + * rotator "sqrt(2)*c1" should be "sqrt(2)*c6". + */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] + dataptr[DCTSIZE*4]; + + /* Add fudge factor here for final descale. */ + tmp10 = tmp0 + tmp3 + (ONE << (PASS1_BITS-1)); + tmp12 = tmp0 - tmp3; + tmp11 = tmp1 + tmp2; + tmp13 = tmp1 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*7]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*6]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*5]; + tmp3 = dataptr[DCTSIZE*3] - dataptr[DCTSIZE*4]; + + dataptr[DCTSIZE*0] = (DCTELEM) RIGHT_SHIFT(tmp10 + tmp11, PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) RIGHT_SHIFT(tmp10 - tmp11, PASS1_BITS); + + z1 = MULTIPLY(tmp12 + tmp13, FIX_0_541196100); + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + dataptr[DCTSIZE*2] = (DCTELEM) + RIGHT_SHIFT(z1 + MULTIPLY(tmp12, FIX_0_765366865), CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*6] = (DCTELEM) + RIGHT_SHIFT(z1 - MULTIPLY(tmp13, FIX_1_847759065), CONST_BITS+PASS1_BITS); + + /* Odd part per figure 8 --- note paper omits factor of sqrt(2). + * 8-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + * i0..i3 in the paper are tmp0..tmp3 here. + */ + + tmp10 = tmp0 + tmp3; + tmp11 = tmp1 + tmp2; + tmp12 = tmp0 + tmp2; + tmp13 = tmp1 + tmp3; + z1 = MULTIPLY(tmp12 + tmp13, FIX_1_175875602); /* c3 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS+PASS1_BITS-1); + + tmp0 = MULTIPLY(tmp0, FIX_1_501321110); /* c1+c3-c5-c7 */ + tmp1 = MULTIPLY(tmp1, FIX_3_072711026); /* c1+c3+c5-c7 */ + tmp2 = MULTIPLY(tmp2, FIX_2_053119869); /* c1+c3-c5+c7 */ + tmp3 = MULTIPLY(tmp3, FIX_0_298631336); /* -c1+c3+c5-c7 */ + tmp10 = MULTIPLY(tmp10, - FIX_0_899976223); /* c7-c3 */ + tmp11 = MULTIPLY(tmp11, - FIX_2_562915447); /* -c1-c3 */ + tmp12 = MULTIPLY(tmp12, - FIX_0_390180644); /* c5-c3 */ + tmp13 = MULTIPLY(tmp13, - FIX_1_961570560); /* -c3-c5 */ + + tmp12 += z1; + tmp13 += z1; + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + tmp10 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp1 + tmp11 + tmp13, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + RIGHT_SHIFT(tmp2 + tmp11 + tmp12, CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*7] = (DCTELEM) + RIGHT_SHIFT(tmp3 + tmp10 + tmp13, CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 3x6 sample block. + * + * 3-point FDCT in pass 1 (rows), 6-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_3x6 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1, tmp2; + INT32 tmp10, tmp11, tmp12; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + /* We scale the results further by 2 as part of output adaption */ + /* scaling for different DCT size. */ + /* 3-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/6). */ + + dataptr = data; + for (ctr = 0; ctr < 6; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]) + GETJSAMPLE(elemptr[2]); + tmp1 = GETJSAMPLE(elemptr[1]); + + tmp2 = GETJSAMPLE(elemptr[0]) - GETJSAMPLE(elemptr[2]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) + ((tmp0 + tmp1 - 3 * CENTERJSAMPLE) << (PASS1_BITS+1)); + dataptr[2] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp1, FIX(0.707106781)), /* c2 */ + CONST_BITS-PASS1_BITS-1); + + /* Odd part */ + + dataptr[1] = (DCTELEM) + DESCALE(MULTIPLY(tmp2, FIX(1.224744871)), /* c1 */ + CONST_BITS-PASS1_BITS-1); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We remove the PASS1_BITS scaling, but leave the results scaled up + * by an overall factor of 8. + * We must also scale the output by (8/6)*(8/3) = 32/9, which we partially + * fold into the constant multipliers (other part was done in pass 1): + * 6-point FDCT kernel, cK represents sqrt(2) * cos(K*pi/12) * 16/9. + */ + + dataptr = data; + for (ctr = 0; ctr < 3; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*5]; + tmp11 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] + dataptr[DCTSIZE*3]; + + tmp10 = tmp0 + tmp2; + tmp12 = tmp0 - tmp2; + + tmp0 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*5]; + tmp1 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*4]; + tmp2 = dataptr[DCTSIZE*2] - dataptr[DCTSIZE*3]; + + dataptr[DCTSIZE*0] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 + tmp11, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*2] = (DCTELEM) + DESCALE(MULTIPLY(tmp12, FIX(2.177324216)), /* c2 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*4] = (DCTELEM) + DESCALE(MULTIPLY(tmp10 - tmp11 - tmp11, FIX(1.257078722)), /* c4 */ + CONST_BITS+PASS1_BITS); + + /* Odd part */ + + tmp10 = MULTIPLY(tmp0 + tmp2, FIX(0.650711829)); /* c5 */ + + dataptr[DCTSIZE*1] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp0 + tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + DESCALE(MULTIPLY(tmp0 - tmp1 - tmp2, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + dataptr[DCTSIZE*5] = (DCTELEM) + DESCALE(tmp10 + MULTIPLY(tmp2 - tmp1, FIX(1.777777778)), /* 16/9 */ + CONST_BITS+PASS1_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 2x4 sample block. + * + * 2-point FDCT in pass 1 (rows), 4-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_2x4 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + INT32 tmp10, tmp11; + DCTELEM *dataptr; + JSAMPROW elemptr; + int ctr; + SHIFT_TEMPS + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + /* Pass 1: process rows. */ + /* Note results are scaled up by sqrt(8) compared to a true DCT. */ + /* We must also scale the output by (8/2)*(8/4) = 2**3, which we add here. */ + + dataptr = data; + for (ctr = 0; ctr < 4; ctr++) { + elemptr = sample_data[ctr] + start_col; + + /* Even part */ + + tmp0 = GETJSAMPLE(elemptr[0]); + tmp1 = GETJSAMPLE(elemptr[1]); + + /* Apply unsigned->signed conversion */ + dataptr[0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 3); + + /* Odd part */ + + dataptr[1] = (DCTELEM) ((tmp0 - tmp1) << 3); + + dataptr += DCTSIZE; /* advance pointer to next row */ + } + + /* Pass 2: process columns. + * We leave the results scaled up by an overall factor of 8. + * 4-point FDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point FDCT]. + */ + + dataptr = data; + for (ctr = 0; ctr < 2; ctr++) { + /* Even part */ + + tmp0 = dataptr[DCTSIZE*0] + dataptr[DCTSIZE*3]; + tmp1 = dataptr[DCTSIZE*1] + dataptr[DCTSIZE*2]; + + tmp10 = dataptr[DCTSIZE*0] - dataptr[DCTSIZE*3]; + tmp11 = dataptr[DCTSIZE*1] - dataptr[DCTSIZE*2]; + + dataptr[DCTSIZE*0] = (DCTELEM) (tmp0 + tmp1); + dataptr[DCTSIZE*2] = (DCTELEM) (tmp0 - tmp1); + + /* Odd part */ + + tmp0 = MULTIPLY(tmp10 + tmp11, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-1); + + dataptr[DCTSIZE*1] = (DCTELEM) + RIGHT_SHIFT(tmp0 + MULTIPLY(tmp10, FIX_0_765366865), /* c2-c6 */ + CONST_BITS); + dataptr[DCTSIZE*3] = (DCTELEM) + RIGHT_SHIFT(tmp0 - MULTIPLY(tmp11, FIX_1_847759065), /* c2+c6 */ + CONST_BITS); + + dataptr++; /* advance pointer to next column */ + } +} + + +/* + * Perform the forward DCT on a 1x2 sample block. + * + * 1-point FDCT in pass 1 (rows), 2-point in pass 2 (columns). + */ + +GLOBAL(void) +jpeg_fdct_1x2 (DCTELEM * data, JSAMPARRAY sample_data, JDIMENSION start_col) +{ + INT32 tmp0, tmp1; + + /* Pre-zero output coefficient block. */ + MEMZERO(data, SIZEOF(DCTELEM) * DCTSIZE2); + + tmp0 = GETJSAMPLE(sample_data[0][start_col]); + tmp1 = GETJSAMPLE(sample_data[1][start_col]); + + /* We leave the results scaled up by an overall factor of 8. + * We must also scale the output by (8/1)*(8/2) = 2**5. + */ + + /* Even part */ + /* Apply unsigned->signed conversion */ + data[DCTSIZE*0] = (DCTELEM) ((tmp0 + tmp1 - 2 * CENTERJSAMPLE) << 5); + + /* Odd part */ + data[DCTSIZE*1] = (DCTELEM) ((tmp0 - tmp1) << 5); +} + +#endif /* DCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jidctflt.c b/src/3rdparty/libjpeg/jidctflt.c new file mode 100644 index 0000000..0188ce3 --- /dev/null +++ b/src/3rdparty/libjpeg/jidctflt.c @@ -0,0 +1,242 @@ +/* + * jidctflt.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a floating-point implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * This implementation should be more accurate than either of the integer + * IDCT implementations. However, it may not give the same results on all + * machines because of differences in roundoff behavior. Speed will depend + * on the hardware's floating point capacity. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with a fixed-point + * implementation, accuracy is lost due to imprecise representation of the + * scaled quantization values. However, that problem does not arise if + * we use floating point arithmetic. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_FLOAT_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a float result. + */ + +#define DEQUANTIZE(coef,quantval) (((FAST_FLOAT) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_float (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + FAST_FLOAT tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + FAST_FLOAT tmp10, tmp11, tmp12, tmp13; + FAST_FLOAT z5, z10, z11, z12, z13; + JCOEFPTR inptr; + FLOAT_MULT_TYPE * quantptr; + FAST_FLOAT * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + FAST_FLOAT workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (FLOAT_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + FAST_FLOAT dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = (tmp1 - tmp3) * ((FAST_FLOAT) 1.414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); /* 2*c4 */ + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ + tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + wsptr[DCTSIZE*0] = tmp0 + tmp7; + wsptr[DCTSIZE*7] = tmp0 - tmp7; + wsptr[DCTSIZE*1] = tmp1 + tmp6; + wsptr[DCTSIZE*6] = tmp1 - tmp6; + wsptr[DCTSIZE*2] = tmp2 + tmp5; + wsptr[DCTSIZE*5] = tmp2 - tmp5; + wsptr[DCTSIZE*4] = tmp3 + tmp4; + wsptr[DCTSIZE*3] = tmp3 - tmp4; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * And testing floats for zero is relatively expensive, so we don't bother. + */ + + /* Even part */ + + tmp10 = wsptr[0] + wsptr[4]; + tmp11 = wsptr[0] - wsptr[4]; + + tmp13 = wsptr[2] + wsptr[6]; + tmp12 = (wsptr[2] - wsptr[6]) * ((FAST_FLOAT) 1.414213562) - tmp13; + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = wsptr[5] + wsptr[3]; + z10 = wsptr[5] - wsptr[3]; + z11 = wsptr[1] + wsptr[7]; + z12 = wsptr[1] - wsptr[7]; + + tmp7 = z11 + z13; + tmp11 = (z11 - z13) * ((FAST_FLOAT) 1.414213562); + + z5 = (z10 + z12) * ((FAST_FLOAT) 1.847759065); /* 2*c2 */ + tmp10 = ((FAST_FLOAT) 1.082392200) * z12 - z5; /* 2*(c2-c6) */ + tmp12 = ((FAST_FLOAT) -2.613125930) * z10 + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + /* Final output stage: scale down by a factor of 8 and range-limit */ + + outptr[0] = range_limit[(int) DESCALE((INT32) (tmp0 + tmp7), 3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) DESCALE((INT32) (tmp0 - tmp7), 3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) DESCALE((INT32) (tmp1 + tmp6), 3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) DESCALE((INT32) (tmp1 - tmp6), 3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) DESCALE((INT32) (tmp2 + tmp5), 3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) DESCALE((INT32) (tmp2 - tmp5), 3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) DESCALE((INT32) (tmp3 + tmp4), 3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) DESCALE((INT32) (tmp3 - tmp4), 3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_FLOAT_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jidctfst.c b/src/3rdparty/libjpeg/jidctfst.c new file mode 100644 index 0000000..dba4216 --- /dev/null +++ b/src/3rdparty/libjpeg/jidctfst.c @@ -0,0 +1,368 @@ +/* + * jidctfst.c + * + * Copyright (C) 1994-1998, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a fast, not so accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on Arai, Agui, and Nakajima's algorithm for + * scaled DCT. Their original paper (Trans. IEICE E-71(11):1095) is in + * Japanese, but the algorithm is described in the Pennebaker & Mitchell + * JPEG textbook (see REFERENCES section in file README). The following code + * is based directly on figure 4-8 in P&M. + * While an 8-point DCT cannot be done in less than 11 multiplies, it is + * possible to arrange the computation so that many of the multiplies are + * simple scalings of the final outputs. These multiplies can then be + * folded into the multiplications or divisions by the JPEG quantization + * table entries. The AA&N method leaves only 5 multiplies and 29 adds + * to be done in the DCT itself. + * The primary disadvantage of this method is that with fixed-point math, + * accuracy is lost due to imprecise representation of the scaled + * quantization values. The smaller the quantization table entry, the less + * precise the scaled value, so this implementation does worse with high- + * quality-setting files than with low-quality ones. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_IFAST_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCTs. /* deliberate syntax err */ +#endif + + +/* Scaling decisions are generally the same as in the LL&M algorithm; + * see jidctint.c for more details. However, we choose to descale + * (right shift) multiplication products as soon as they are formed, + * rather than carrying additional fractional bits into subsequent additions. + * This compromises accuracy slightly, but it lets us save a few shifts. + * More importantly, 16-bit arithmetic is then adequate (for 8-bit samples) + * everywhere except in the multiplications proper; this saves a good deal + * of work on 16-bit-int machines. + * + * The dequantized coefficients are not integers because the AA&N scaling + * factors have been incorporated. We represent them scaled up by PASS1_BITS, + * so that the first and second IDCT rounds have the same input scaling. + * For 8-bit JSAMPLEs, we choose IFAST_SCALE_BITS = PASS1_BITS so as to + * avoid a descaling shift; this compromises accuracy rather drastically + * for small quantization table entries, but it saves a lot of shifts. + * For 12-bit JSAMPLEs, there's no hope of using 16x16 multiplies anyway, + * so we use a much larger scaling factor to preserve accuracy. + * + * A final compromise is to represent the multiplicative constants to only + * 8 fractional bits, rather than 13. This saves some shifting work on some + * machines, and may also reduce the cost of multiplication (since there + * are fewer one-bits in the constants). + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 8 +#define PASS1_BITS 2 +#else +#define CONST_BITS 8 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 8 +#define FIX_1_082392200 ((INT32) 277) /* FIX(1.082392200) */ +#define FIX_1_414213562 ((INT32) 362) /* FIX(1.414213562) */ +#define FIX_1_847759065 ((INT32) 473) /* FIX(1.847759065) */ +#define FIX_2_613125930 ((INT32) 669) /* FIX(2.613125930) */ +#else +#define FIX_1_082392200 FIX(1.082392200) +#define FIX_1_414213562 FIX(1.414213562) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_2_613125930 FIX(2.613125930) +#endif + + +/* We can gain a little more speed, with a further compromise in accuracy, + * by omitting the addition in a descaling shift. This yields an incorrectly + * rounded result half the time... + */ + +#ifndef USE_ACCURATE_ROUNDING +#undef DESCALE +#define DESCALE(x,n) RIGHT_SHIFT(x, n) +#endif + + +/* Multiply a DCTELEM variable by an INT32 constant, and immediately + * descale to yield a DCTELEM result. + */ + +#define MULTIPLY(var,const) ((DCTELEM) DESCALE((var) * (const), CONST_BITS)) + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce a DCTELEM result. For 8-bit data a 16x16->16 + * multiplication will do. For 12-bit data, the multiplier table is + * declared INT32, so a 32-bit multiply will be used. + */ + +#if BITS_IN_JSAMPLE == 8 +#define DEQUANTIZE(coef,quantval) (((IFAST_MULT_TYPE) (coef)) * (quantval)) +#else +#define DEQUANTIZE(coef,quantval) \ + DESCALE((coef)*(quantval), IFAST_SCALE_BITS-PASS1_BITS) +#endif + + +/* Like DESCALE, but applies to a DCTELEM and produces an int. + * We assume that int right shift is unsigned if INT32 right shift is. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define ISHIFT_TEMPS DCTELEM ishift_temp; +#if BITS_IN_JSAMPLE == 8 +#define DCTELEMBITS 16 /* DCTELEM may be 16 or 32 bits */ +#else +#define DCTELEMBITS 32 /* DCTELEM must be 32 bits */ +#endif +#define IRIGHT_SHIFT(x,shft) \ + ((ishift_temp = (x)) < 0 ? \ + (ishift_temp >> (shft)) | ((~((DCTELEM) 0)) << (DCTELEMBITS-(shft))) : \ + (ishift_temp >> (shft))) +#else +#define ISHIFT_TEMPS +#define IRIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + +#ifdef USE_ACCURATE_ROUNDING +#define IDESCALE(x,n) ((int) IRIGHT_SHIFT((x) + (1 << ((n)-1)), n)) +#else +#define IDESCALE(x,n) ((int) IRIGHT_SHIFT(x, n)) +#endif + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_ifast (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + DCTELEM tmp0, tmp1, tmp2, tmp3, tmp4, tmp5, tmp6, tmp7; + DCTELEM tmp10, tmp11, tmp12, tmp13; + DCTELEM z5, z10, z11, z12, z13; + JCOEFPTR inptr; + IFAST_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS /* for DESCALE */ + ISHIFT_TEMPS /* for IDESCALE */ + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (IFAST_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = (int) DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = tmp0 + tmp2; /* phase 3 */ + tmp11 = tmp0 - tmp2; + + tmp13 = tmp1 + tmp3; /* phases 5-3 */ + tmp12 = MULTIPLY(tmp1 - tmp3, FIX_1_414213562) - tmp13; /* 2*c4 */ + + tmp0 = tmp10 + tmp13; /* phase 2 */ + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + tmp4 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp5 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp6 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp7 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z13 = tmp6 + tmp5; /* phase 6 */ + z10 = tmp6 - tmp5; + z11 = tmp4 + tmp7; + z12 = tmp4 - tmp7; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ + tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + wsptr[DCTSIZE*0] = (int) (tmp0 + tmp7); + wsptr[DCTSIZE*7] = (int) (tmp0 - tmp7); + wsptr[DCTSIZE*1] = (int) (tmp1 + tmp6); + wsptr[DCTSIZE*6] = (int) (tmp1 - tmp6); + wsptr[DCTSIZE*2] = (int) (tmp2 + tmp5); + wsptr[DCTSIZE*5] = (int) (tmp2 - tmp5); + wsptr[DCTSIZE*4] = (int) (tmp3 + tmp4); + wsptr[DCTSIZE*3] = (int) (tmp3 - tmp4); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[IDESCALE(wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part */ + + tmp10 = ((DCTELEM) wsptr[0] + (DCTELEM) wsptr[4]); + tmp11 = ((DCTELEM) wsptr[0] - (DCTELEM) wsptr[4]); + + tmp13 = ((DCTELEM) wsptr[2] + (DCTELEM) wsptr[6]); + tmp12 = MULTIPLY((DCTELEM) wsptr[2] - (DCTELEM) wsptr[6], FIX_1_414213562) + - tmp13; + + tmp0 = tmp10 + tmp13; + tmp3 = tmp10 - tmp13; + tmp1 = tmp11 + tmp12; + tmp2 = tmp11 - tmp12; + + /* Odd part */ + + z13 = (DCTELEM) wsptr[5] + (DCTELEM) wsptr[3]; + z10 = (DCTELEM) wsptr[5] - (DCTELEM) wsptr[3]; + z11 = (DCTELEM) wsptr[1] + (DCTELEM) wsptr[7]; + z12 = (DCTELEM) wsptr[1] - (DCTELEM) wsptr[7]; + + tmp7 = z11 + z13; /* phase 5 */ + tmp11 = MULTIPLY(z11 - z13, FIX_1_414213562); /* 2*c4 */ + + z5 = MULTIPLY(z10 + z12, FIX_1_847759065); /* 2*c2 */ + tmp10 = MULTIPLY(z12, FIX_1_082392200) - z5; /* 2*(c2-c6) */ + tmp12 = MULTIPLY(z10, - FIX_2_613125930) + z5; /* -2*(c2+c6) */ + + tmp6 = tmp12 - tmp7; /* phase 2 */ + tmp5 = tmp11 - tmp6; + tmp4 = tmp10 + tmp5; + + /* Final output stage: scale down by a factor of 8 and range-limit */ + + outptr[0] = range_limit[IDESCALE(tmp0 + tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[IDESCALE(tmp0 - tmp7, PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[IDESCALE(tmp1 + tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[IDESCALE(tmp1 - tmp6, PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[IDESCALE(tmp2 + tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[IDESCALE(tmp2 - tmp5, PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[IDESCALE(tmp3 + tmp4, PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[IDESCALE(tmp3 - tmp4, PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#endif /* DCT_IFAST_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jidctint.c b/src/3rdparty/libjpeg/jidctint.c new file mode 100644 index 0000000..dcdf7ce --- /dev/null +++ b/src/3rdparty/libjpeg/jidctint.c @@ -0,0 +1,5137 @@ +/* + * jidctint.c + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modification developed 2002-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains a slow-but-accurate integer implementation of the + * inverse DCT (Discrete Cosine Transform). In the IJG code, this routine + * must also perform dequantization of the input coefficients. + * + * A 2-D IDCT can be done by 1-D IDCT on each column followed by 1-D IDCT + * on each row (or vice versa, but it's more convenient to emit a row at + * a time). Direct algorithms are also available, but they are much more + * complex and seem not to be any faster when reduced to code. + * + * This implementation is based on an algorithm described in + * C. Loeffler, A. Ligtenberg and G. Moschytz, "Practical Fast 1-D DCT + * Algorithms with 11 Multiplications", Proc. Int'l. Conf. on Acoustics, + * Speech, and Signal Processing 1989 (ICASSP '89), pp. 988-991. + * The primary algorithm described there uses 11 multiplies and 29 adds. + * We use their alternate method with 12 multiplies and 32 adds. + * The advantage of this method is that no data path contains more than one + * multiplication; this allows a very simple and accurate implementation in + * scaled fixed-point arithmetic, with a minimal number of shifts. + * + * We also provide IDCT routines with various output sample block sizes for + * direct resolution reduction or enlargement and for direct resolving the + * common 2x1 and 1x2 subsampling cases without additional resampling: NxN + * (N=1...16), 2NxN, and Nx2N (N=1...8) pixels for one 8x8 input DCT block. + * + * For N<8 we simply take the corresponding low-frequency coefficients of + * the 8x8 input DCT block and apply an NxN point IDCT on the sub-block + * to yield the downscaled outputs. + * This can be seen as direct low-pass downsampling from the DCT domain + * point of view rather than the usual spatial domain point of view, + * yielding significant computational savings and results at least + * as good as common bilinear (averaging) spatial downsampling. + * + * For N>8 we apply a partial NxN IDCT on the 8 input coefficients as + * lower frequencies and higher frequencies assumed to be zero. + * It turns out that the computational effort is similar to the 8x8 IDCT + * regarding the output size. + * Furthermore, the scaling and descaling is the same for all IDCT sizes. + * + * CAUTION: We rely on the FIX() macro except for the N=1,2,4,8 cases + * since there would be too many additional constants to pre-calculate. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jdct.h" /* Private declarations for DCT subsystem */ + +#ifdef DCT_ISLOW_SUPPORTED + + +/* + * This module is specialized to the case DCTSIZE = 8. + */ + +#if DCTSIZE != 8 + Sorry, this code only copes with 8x8 DCT blocks. /* deliberate syntax err */ +#endif + + +/* + * The poop on this scaling stuff is as follows: + * + * Each 1-D IDCT step produces outputs which are a factor of sqrt(N) + * larger than the true IDCT outputs. The final outputs are therefore + * a factor of N larger than desired; since N=8 this can be cured by + * a simple right shift at the end of the algorithm. The advantage of + * this arrangement is that we save two multiplications per 1-D IDCT, + * because the y0 and y4 inputs need not be divided by sqrt(N). + * + * We have to do addition and subtraction of the integer inputs, which + * is no problem, and multiplication by fractional constants, which is + * a problem to do in integer arithmetic. We multiply all the constants + * by CONST_SCALE and convert them to integer constants (thus retaining + * CONST_BITS bits of precision in the constants). After doing a + * multiplication we have to divide the product by CONST_SCALE, with proper + * rounding, to produce the correct output. This division can be done + * cheaply as a right shift of CONST_BITS bits. We postpone shifting + * as long as possible so that partial sums can be added together with + * full fractional precision. + * + * The outputs of the first pass are scaled up by PASS1_BITS bits so that + * they are represented to better-than-integral precision. These outputs + * require BITS_IN_JSAMPLE + PASS1_BITS + 3 bits; this fits in a 16-bit word + * with the recommended scaling. (To scale up 12-bit sample data further, an + * intermediate INT32 array would be needed.) + * + * To avoid overflow of the 32-bit intermediate results in pass 2, we must + * have BITS_IN_JSAMPLE + CONST_BITS + PASS1_BITS <= 26. Error analysis + * shows that the values given below are the most effective. + */ + +#if BITS_IN_JSAMPLE == 8 +#define CONST_BITS 13 +#define PASS1_BITS 2 +#else +#define CONST_BITS 13 +#define PASS1_BITS 1 /* lose a little precision to avoid overflow */ +#endif + +/* Some C compilers fail to reduce "FIX(constant)" at compile time, thus + * causing a lot of useless floating-point operations at run time. + * To get around this we use the following pre-calculated constants. + * If you change CONST_BITS you may want to add appropriate values. + * (With a reasonable C compiler, you can just rely on the FIX() macro...) + */ + +#if CONST_BITS == 13 +#define FIX_0_298631336 ((INT32) 2446) /* FIX(0.298631336) */ +#define FIX_0_390180644 ((INT32) 3196) /* FIX(0.390180644) */ +#define FIX_0_541196100 ((INT32) 4433) /* FIX(0.541196100) */ +#define FIX_0_765366865 ((INT32) 6270) /* FIX(0.765366865) */ +#define FIX_0_899976223 ((INT32) 7373) /* FIX(0.899976223) */ +#define FIX_1_175875602 ((INT32) 9633) /* FIX(1.175875602) */ +#define FIX_1_501321110 ((INT32) 12299) /* FIX(1.501321110) */ +#define FIX_1_847759065 ((INT32) 15137) /* FIX(1.847759065) */ +#define FIX_1_961570560 ((INT32) 16069) /* FIX(1.961570560) */ +#define FIX_2_053119869 ((INT32) 16819) /* FIX(2.053119869) */ +#define FIX_2_562915447 ((INT32) 20995) /* FIX(2.562915447) */ +#define FIX_3_072711026 ((INT32) 25172) /* FIX(3.072711026) */ +#else +#define FIX_0_298631336 FIX(0.298631336) +#define FIX_0_390180644 FIX(0.390180644) +#define FIX_0_541196100 FIX(0.541196100) +#define FIX_0_765366865 FIX(0.765366865) +#define FIX_0_899976223 FIX(0.899976223) +#define FIX_1_175875602 FIX(1.175875602) +#define FIX_1_501321110 FIX(1.501321110) +#define FIX_1_847759065 FIX(1.847759065) +#define FIX_1_961570560 FIX(1.961570560) +#define FIX_2_053119869 FIX(2.053119869) +#define FIX_2_562915447 FIX(2.562915447) +#define FIX_3_072711026 FIX(3.072711026) +#endif + + +/* Multiply an INT32 variable by an INT32 constant to yield an INT32 result. + * For 8-bit samples with the recommended scaling, all the variable + * and constant values involved are no more than 16 bits wide, so a + * 16x16->32 bit multiply can be used instead of a full 32x32 multiply. + * For 12-bit samples, a full 32-bit multiplication will be needed. + */ + +#if BITS_IN_JSAMPLE == 8 +#define MULTIPLY(var,const) MULTIPLY16C16(var,const) +#else +#define MULTIPLY(var,const) ((var) * (const)) +#endif + + +/* Dequantize a coefficient by multiplying it by the multiplier-table + * entry; produce an int result. In this module, both inputs and result + * are 16 bits or less, so either int or short multiply will work. + */ + +#define DEQUANTIZE(coef,quantval) (((ISLOW_MULT_TYPE) (coef)) * (quantval)) + + +/* + * Perform dequantization and inverse DCT on one block of coefficients. + */ + +GLOBAL(void) +jpeg_idct_islow (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[DCTSIZE2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < DCTSIZE; ctr++) { + outptr = output_buf[ctr] + output_col; + /* Rows of zeroes can be exploited in the same way as we did with columns. + * However, the column calculation has created many nonzero AC terms, so + * the simplification applies less often (typically 5% to 10% of the time). + * On machines with very fast multiplication, it's possible that the + * test takes more time than it's worth. In that case this section + * may be commented out. + */ + +#ifndef NO_ZERO_ROW_TEST + if (wsptr[1] == 0 && wsptr[2] == 0 && wsptr[3] == 0 && wsptr[4] == 0 && + wsptr[5] == 0 && wsptr[6] == 0 && wsptr[7] == 0) { + /* AC terms all zero */ + JSAMPLE dcval = range_limit[(int) DESCALE((INT32) wsptr[0], PASS1_BITS+3) + & RANGE_MASK]; + + outptr[0] = dcval; + outptr[1] = dcval; + outptr[2] = dcval; + outptr[3] = dcval; + outptr[4] = dcval; + outptr[5] = dcval; + outptr[6] = dcval; + outptr[7] = dcval; + + wsptr += DCTSIZE; /* advance pointer to next row */ + continue; + } +#endif + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + /* Add fudge factor here for final descale. */ + z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + +#ifdef IDCT_SCALING_SUPPORTED + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x7 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/14). + */ + +GLOBAL(void) +jpeg_idct_7x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp13 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp13 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp13 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) RIGHT_SHIFT(tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp13 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp13 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp11 = tmp10 + tmp12 + tmp13 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp0 = z1 + z3; + z2 -= tmp0; + tmp0 = MULTIPLY(tmp0, FIX(1.274162392)) + tmp13; /* c2 */ + tmp10 += tmp0 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp12 += tmp0 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp13 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp1 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp2 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp0 = tmp1 - tmp2; + tmp1 += tmp2; + tmp2 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp1 += tmp2; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp0 += z2; + tmp2 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x6 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/12). + */ + +GLOBAL(void) +jpeg_idct_6x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) (tmp11 + tmp1); + wsptr[6*4] = (int) (tmp11 - tmp1); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 5x5 output block. + * + * Optimized algorithm with 5 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/10). + */ + +GLOBAL(void) +jpeg_idct_5x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp12 <<= CONST_BITS; + tmp0 = (INT32) wsptr[2]; + tmp1 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp0 + tmp1, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp0 - tmp1, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp0 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp1 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 4x4 output block. + * + * Optimized algorithm with 3 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + +GLOBAL(void) +jpeg_idct_4x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[4*0] = (int) (tmp10 + tmp0); + wsptr[4*3] = (int) (tmp10 - tmp0); + wsptr[4*1] = (int) (tmp12 + tmp2); + wsptr[4*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x3 output block. + * + * Optimized algorithm with 2 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/6). + */ + +GLOBAL(void) +jpeg_idct_3x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 2x2 output block. + * + * Multiplication-less algorithm. + */ + +GLOBAL(void) +jpeg_idct_2x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp4, tmp5; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* Pass 1: process columns from input. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Column 0 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + /* Add fudge factor here for final descale. */ + tmp4 += ONE << 2; + + tmp0 = tmp4 + tmp5; + tmp2 = tmp4 - tmp5; + + /* Column 1 */ + tmp4 = DEQUANTIZE(coef_block[DCTSIZE*0+1], quantptr[DCTSIZE*0+1]); + tmp5 = DEQUANTIZE(coef_block[DCTSIZE*1+1], quantptr[DCTSIZE*1+1]); + + tmp1 = tmp4 + tmp5; + tmp3 = tmp4 - tmp5; + + /* Pass 2: process 2 rows, store into output array. */ + + /* Row 0 */ + outptr = output_buf[0] + output_col; + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp0 + tmp1, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp0 - tmp1, 3) & RANGE_MASK]; + + /* Row 1 */ + outptr = output_buf[1] + output_col; + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp2 + tmp3, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2 - tmp3, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 1x1 output block. + * + * We hardly need an inverse DCT routine for this: just take the + * average pixel value, which is one-eighth of the DC coefficient. + */ + +GLOBAL(void) +jpeg_idct_1x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + int dcval; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* 1x1 is trivial: just take the DC coefficient divided by 8. */ + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + dcval = DEQUANTIZE(coef_block[0], quantptr[0]); + dcval = (int) DESCALE((INT32) dcval, 3); + + output_buf[0][output_col] = range_limit[dcval & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 9x9 output block. + * + * Optimized algorithm with 10 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/18). + */ + +GLOBAL(void) +jpeg_idct_9x9 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*9]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp11 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp13 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp13 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 9 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 9; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp3 = MULTIPLY(z3, FIX(0.707106781)); /* c6 */ + tmp1 = tmp0 + tmp3; + tmp2 = tmp0 - tmp3 - tmp3; + + tmp0 = MULTIPLY(z1 - z2, FIX(0.707106781)); /* c6 */ + tmp11 = tmp2 + tmp0; + tmp14 = tmp2 - tmp0 - tmp0; + + tmp0 = MULTIPLY(z1 + z2, FIX(1.328926049)); /* c2 */ + tmp2 = MULTIPLY(z1, FIX(1.083350441)); /* c4 */ + tmp3 = MULTIPLY(z2, FIX(0.245575608)); /* c8 */ + + tmp10 = tmp1 + tmp0 - tmp3; + tmp12 = tmp1 - tmp0 + tmp2; + tmp13 = tmp1 - tmp2 + tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + z2 = MULTIPLY(z2, - FIX(1.224744871)); /* -c3 */ + + tmp2 = MULTIPLY(z1 + z3, FIX(0.909038955)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(0.483689525)); /* c7 */ + tmp0 = tmp2 + tmp3 - z2; + tmp1 = MULTIPLY(z3 - z4, FIX(1.392728481)); /* c1 */ + tmp2 += z2 - tmp1; + tmp3 += z2 + tmp1; + tmp1 = MULTIPLY(z1 - z3 - z4, FIX(1.224744871)); /* c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x10 output block. + * + * Optimized algorithm with 12 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/20). + */ + +GLOBAL(void) +jpeg_idct_10x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) (tmp22 + tmp12); + wsptr[8*7] = (int) (tmp22 - tmp12); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 11x11 output block. + * + * Optimized algorithm with 24 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/22). + */ + +GLOBAL(void) +jpeg_idct_11x11 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*11]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 11 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 11; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp10 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(2.546640132)); /* c2+c4 */ + tmp23 = MULTIPLY(z2 - z1, FIX(0.430815045)); /* c2-c6 */ + z4 = z1 + z3; + tmp24 = MULTIPLY(z4, - FIX(1.155664402)); /* -(c2-c10) */ + z4 -= z2; + tmp25 = tmp10 + MULTIPLY(z4, FIX(1.356927976)); /* c2 */ + tmp21 = tmp20 + tmp23 + tmp25 - + MULTIPLY(z2, FIX(1.821790775)); /* c2+c4+c10-c6 */ + tmp20 += tmp25 + MULTIPLY(z3, FIX(2.115825087)); /* c4+c6 */ + tmp23 += tmp25 - MULTIPLY(z1, FIX(1.513598477)); /* c6+c8 */ + tmp24 += tmp25; + tmp22 = tmp24 - MULTIPLY(z3, FIX(0.788749120)); /* c8+c10 */ + tmp24 += MULTIPLY(z2, FIX(1.944413522)) - /* c2+c8 */ + MULTIPLY(z1, FIX(1.390975730)); /* c4+c10 */ + tmp25 = tmp10 - MULTIPLY(z4, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z2; + tmp14 = MULTIPLY(tmp11 + z3 + z4, FIX(0.398430003)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.887983902)); /* c3-c9 */ + tmp12 = MULTIPLY(z1 + z3, FIX(0.670361295)); /* c5-c9 */ + tmp13 = tmp14 + MULTIPLY(z1 + z4, FIX(0.366151574)); /* c7-c9 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(0.923107866)); /* c7+c5+c3-c1-2*c9 */ + z1 = tmp14 - MULTIPLY(z2 + z3, FIX(1.163011579)); /* c7+c9 */ + tmp11 += z1 + MULTIPLY(z2, FIX(2.073276588)); /* c1+c7+3*c9-c3 */ + tmp12 += z1 - MULTIPLY(z3, FIX(1.192193623)); /* c3+c5-c7-c9 */ + z1 = MULTIPLY(z2 + z4, - FIX(1.798248910)); /* -(c1+c9) */ + tmp11 += z1; + tmp13 += z1 + MULTIPLY(z4, FIX(2.102458632)); /* c1+c5+c9-c7 */ + tmp14 += MULTIPLY(z2, - FIX(1.467221301)) + /* -(c5+c9) */ + MULTIPLY(z3, FIX(1.001388905)) - /* c1-c9 */ + MULTIPLY(z4, FIX(1.684843907)); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x12 output block. + * + * Optimized algorithm with 15 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/24). + */ + +GLOBAL(void) +jpeg_idct_12x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 13x13 output block. + * + * Optimized algorithm with 29 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/26). + */ + +GLOBAL(void) +jpeg_idct_13x13 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*13]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 13 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 13; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + tmp12 = MULTIPLY(tmp10, FIX(1.155388986)); /* (c4+c6)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.096834934)) + z1; /* (c4-c6)/2 */ + + tmp20 = MULTIPLY(z2, FIX(1.373119086)) + tmp12 + tmp13; /* c2 */ + tmp22 = MULTIPLY(z2, FIX(0.501487041)) - tmp12 + tmp13; /* c10 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.316450131)); /* (c8-c12)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.486914739)) + z1; /* (c8+c12)/2 */ + + tmp21 = MULTIPLY(z2, FIX(1.058554052)) - tmp12 + tmp13; /* c6 */ + tmp25 = MULTIPLY(z2, - FIX(1.252223920)) + tmp12 + tmp13; /* c4 */ + + tmp12 = MULTIPLY(tmp10, FIX(0.435816023)); /* (c2-c10)/2 */ + tmp13 = MULTIPLY(tmp11, FIX(0.937303064)) - z1; /* (c2+c10)/2 */ + + tmp23 = MULTIPLY(z2, - FIX(0.170464608)) - tmp12 - tmp13; /* c12 */ + tmp24 = MULTIPLY(z2, - FIX(0.803364869)) + tmp12 - tmp13; /* c8 */ + + tmp26 = MULTIPLY(tmp11 - z2, FIX(1.414213562)) + z1; /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z1 + z2, FIX(1.322312651)); /* c3 */ + tmp12 = MULTIPLY(z1 + z3, FIX(1.163874945)); /* c5 */ + tmp15 = z1 + z4; + tmp13 = MULTIPLY(tmp15, FIX(0.937797057)); /* c7 */ + tmp10 = tmp11 + tmp12 + tmp13 - + MULTIPLY(z1, FIX(2.020082300)); /* c7+c5+c3-c1 */ + tmp14 = MULTIPLY(z2 + z3, - FIX(0.338443458)); /* -c11 */ + tmp11 += tmp14 + MULTIPLY(z2, FIX(0.837223564)); /* c5+c9+c11-c3 */ + tmp12 += tmp14 - MULTIPLY(z3, FIX(1.572116027)); /* c1+c5-c9-c11 */ + tmp14 = MULTIPLY(z2 + z4, - FIX(1.163874945)); /* -c5 */ + tmp11 += tmp14; + tmp13 += tmp14 + MULTIPLY(z4, FIX(2.205608352)); /* c3+c5+c9-c7 */ + tmp14 = MULTIPLY(z3 + z4, - FIX(0.657217813)); /* -c9 */ + tmp12 += tmp14; + tmp13 += tmp14; + tmp15 = MULTIPLY(tmp15, FIX(0.338443458)); /* c11 */ + tmp14 = tmp15 + MULTIPLY(z1, FIX(0.318774355)) - /* c9-c11 */ + MULTIPLY(z2, FIX(0.466105296)); /* c1-c7 */ + z1 = MULTIPLY(z3 - z2, FIX(0.937797057)); /* c7 */ + tmp14 += z1; + tmp15 += z1 + MULTIPLY(z3, FIX(0.384515595)) - /* c3-c7 */ + MULTIPLY(z4, FIX(1.742345811)); /* c1+c11 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x14 output block. + * + * Optimized algorithm with 20 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/28). + */ + +GLOBAL(void) +jpeg_idct_14x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) (tmp23 + tmp13); + wsptr[8*10] = (int) (tmp23 - tmp13); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 15x15 output block. + * + * Optimized algorithm with 22 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/30). + */ + +GLOBAL(void) +jpeg_idct_15x15 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*15]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z4 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 15 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 15; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[4]; + z4 = (INT32) wsptr[6]; + + tmp10 = MULTIPLY(z4, FIX(0.437016024)); /* c12 */ + tmp11 = MULTIPLY(z4, FIX(1.144122806)); /* c6 */ + + tmp12 = z1 - tmp10; + tmp13 = z1 + tmp11; + z1 -= (tmp11 - tmp10) << 1; /* c0 = (c6-c12)*2 */ + + z4 = z2 - z3; + z3 += z2; + tmp10 = MULTIPLY(z3, FIX(1.337628990)); /* (c2+c4)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.045680613)); /* (c2-c4)/2 */ + z2 = MULTIPLY(z2, FIX(1.439773946)); /* c4+c14 */ + + tmp20 = tmp13 + tmp10 + tmp11; + tmp23 = tmp12 - tmp10 + tmp11 + z2; + + tmp10 = MULTIPLY(z3, FIX(0.547059574)); /* (c8+c14)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.399234004)); /* (c8-c14)/2 */ + + tmp25 = tmp13 - tmp10 - tmp11; + tmp26 = tmp12 + tmp10 - tmp11 - z2; + + tmp10 = MULTIPLY(z3, FIX(0.790569415)); /* (c6+c12)/2 */ + tmp11 = MULTIPLY(z4, FIX(0.353553391)); /* (c6-c12)/2 */ + + tmp21 = tmp12 + tmp10 + tmp11; + tmp24 = tmp13 - tmp10 + tmp11; + tmp11 += tmp11; + tmp22 = z1 + tmp11; /* c10 = c6-c12 */ + tmp27 = z1 - tmp11 - tmp11; /* c0 = (c6-c12)*2 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z4 = (INT32) wsptr[5]; + z3 = MULTIPLY(z4, FIX(1.224744871)); /* c5 */ + z4 = (INT32) wsptr[7]; + + tmp13 = z2 - z4; + tmp15 = MULTIPLY(z1 + tmp13, FIX(0.831253876)); /* c9 */ + tmp11 = tmp15 + MULTIPLY(z1, FIX(0.513743148)); /* c3-c9 */ + tmp14 = tmp15 - MULTIPLY(tmp13, FIX(2.176250899)); /* c3+c9 */ + + tmp13 = MULTIPLY(z2, - FIX(0.831253876)); /* -c9 */ + tmp15 = MULTIPLY(z2, - FIX(1.344997024)); /* -c3 */ + z2 = z1 - z4; + tmp12 = z3 + MULTIPLY(z2, FIX(1.406466353)); /* c1 */ + + tmp10 = tmp12 + MULTIPLY(z4, FIX(2.457431844)) - tmp15; /* c1+c7 */ + tmp16 = tmp12 - MULTIPLY(z1, FIX(1.112434820)) + tmp13; /* c1-c13 */ + tmp12 = MULTIPLY(z2, FIX(1.224744871)) - z3; /* c5 */ + z2 = MULTIPLY(z1 + z4, FIX(0.575212477)); /* c11 */ + tmp13 += z2 + MULTIPLY(z1, FIX(0.475753014)) - z3; /* c7-c11 */ + tmp15 += z2 - MULTIPLY(z4, FIX(0.869244010)) + z3; /* c11+c13 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x16 output block. + * + * Optimized algorithm with 28 multiplications in the 1-D kernel. + * cK represents sqrt(2) * cos(K*pi/32). + */ + +GLOBAL(void) +jpeg_idct_16x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += 1 << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 16 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 16x8 output block. + * + * 8-point IDCT in pass 1 (columns), 16-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_16x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = DCTSIZE; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[DCTSIZE*0] = dcval; + wsptr[DCTSIZE*1] = dcval; + wsptr[DCTSIZE*2] = dcval; + wsptr[DCTSIZE*3] = dcval; + wsptr[DCTSIZE*4] = dcval; + wsptr[DCTSIZE*5] = dcval; + wsptr[DCTSIZE*6] = dcval; + wsptr[DCTSIZE*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[DCTSIZE*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[DCTSIZE*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + + z1 = (INT32) wsptr[4]; + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[15] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[14] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp27 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp27 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 14x7 output block. + * + * 7-point IDCT in pass 1 (columns), 14-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_14x7 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*7]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp23 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp23 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp23 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 7 rows from work array, store into output array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z1 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z1 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = z1 - ((z2 + z3 - z4) << 1); /* c0 = (c4+c12-c8)*2 */ + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[6]; + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + z4 <<= CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + z4 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - z4; /* c11 */ + tmp16 += tmp15; + tmp13 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - z4; /* -c13 */ + tmp11 += tmp13 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += tmp13 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + tmp13 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += tmp13 + z4 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += tmp13 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = ((z1 - z3) << CONST_BITS) + z4; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[13] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[12] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp26 + tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp26 - tmp16, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 12x6 output block. + * + * 6-point IDCT in pass 1 (columns), 12-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_12x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp10 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp10 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp12 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = RIGHT_SHIFT(tmp10 - tmp20 - tmp20, CONST_BITS-PASS1_BITS); + tmp20 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) (tmp21 + tmp11); + wsptr[8*4] = (int) (tmp21 - tmp11); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + + z4 = (INT32) wsptr[4]; + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = (INT32) wsptr[2]; + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = (INT32) wsptr[6]; + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z4 = (INT32) wsptr[7]; + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[11] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[10] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp25 + tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp25 - tmp15, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 10x5 output block. + * + * 5-point IDCT in pass 1 (columns), 10-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_10x5 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*5]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp12 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp12 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp13 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp14 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp10 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp10 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp11 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp11 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp12, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 5 rows from work array, store into output array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + z3 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[4]; + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = z3 - ((z1 - z2) << 1); /* c0 = (c4-c8)*2 */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + z3 <<= CONST_BITS; + z4 = (INT32) wsptr[7]; + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z3 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z3 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = ((z1 - tmp13) << CONST_BITS) - z3; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[9] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[8] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp23 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp24 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp24 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 8; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 8x4 output block. + * + * 4-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << PASS1_BITS; + tmp12 = (tmp0 - tmp2) << PASS1_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp0 = RIGHT_SHIFT(z1 + MULTIPLY(z2, FIX_0_765366865), /* c2-c6 */ + CONST_BITS-PASS1_BITS); + tmp2 = RIGHT_SHIFT(z1 - MULTIPLY(z3, FIX_1_847759065), /* c2+c6 */ + CONST_BITS-PASS1_BITS); + + /* Final output stage */ + + wsptr[8*0] = (int) (tmp10 + tmp0); + wsptr[8*3] = (int) (tmp10 - tmp0); + wsptr[8*1] = (int) (tmp12 + tmp2); + wsptr[8*2] = (int) (tmp12 - tmp2); + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + /* Add fudge factor here for final descale. */ + z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 6x3 output block. + * + * 3-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x3 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*3]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 3 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[4]; + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = tmp0 - tmp10 - tmp10; + tmp10 = (INT32) wsptr[2]; + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x2 output block. + * + * 2-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[4*2]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp10 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + + /* Odd part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + wsptr[4*0] = tmp10 + tmp0; + wsptr[4*1] = tmp10 - tmp0; + } + + /* Pass 2: process 2 rows from work array, store into output array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = wsptr[0] + (ONE << 2); + tmp2 = wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = wsptr[1]; + z3 = wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x1 output block. + * + * 1-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x1 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp10; + ISLOW_MULT_TYPE * quantptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* Pass 1: empty. */ + + /* Pass 2: process 1 row from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + outptr = output_buf[0] + output_col; + + /* Even part */ + + tmp10 = DEQUANTIZE(coef_block[0], quantptr[0]); + /* Add fudge factor here for final descale. */ + tmp10 += ONE << 2; + + /* Odd part */ + + tmp0 = DEQUANTIZE(coef_block[1], quantptr[1]); + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) & RANGE_MASK]; +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 8x16 output block. + * + * 16-point IDCT in pass 1 (columns), 8-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_8x16 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3, tmp10, tmp11, tmp12, tmp13; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26, tmp27; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[8*16]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 16-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/32). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + + z1 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp1 = MULTIPLY(z1, FIX(1.306562965)); /* c4[16] = c2[8] */ + tmp2 = MULTIPLY(z1, FIX_0_541196100); /* c12[16] = c6[8] */ + + tmp10 = tmp0 + tmp1; + tmp11 = tmp0 - tmp1; + tmp12 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z3 = z1 - z2; + z4 = MULTIPLY(z3, FIX(0.275899379)); /* c14[16] = c7[8] */ + z3 = MULTIPLY(z3, FIX(1.387039845)); /* c2[16] = c1[8] */ + + tmp0 = z3 + MULTIPLY(z2, FIX_2_562915447); /* (c6+c2)[16] = (c3+c1)[8] */ + tmp1 = z4 + MULTIPLY(z1, FIX_0_899976223); /* (c6-c14)[16] = (c3-c7)[8] */ + tmp2 = z3 - MULTIPLY(z1, FIX(0.601344887)); /* (c2-c10)[16] = (c1-c5)[8] */ + tmp3 = z4 - MULTIPLY(z2, FIX(0.509795579)); /* (c10-c14)[16] = (c5-c7)[8] */ + + tmp20 = tmp10 + tmp0; + tmp27 = tmp10 - tmp0; + tmp21 = tmp12 + tmp1; + tmp26 = tmp12 - tmp1; + tmp22 = tmp13 + tmp2; + tmp25 = tmp13 - tmp2; + tmp23 = tmp11 + tmp3; + tmp24 = tmp11 - tmp3; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z1 + z3; + + tmp1 = MULTIPLY(z1 + z2, FIX(1.353318001)); /* c3 */ + tmp2 = MULTIPLY(tmp11, FIX(1.247225013)); /* c5 */ + tmp3 = MULTIPLY(z1 + z4, FIX(1.093201867)); /* c7 */ + tmp10 = MULTIPLY(z1 - z4, FIX(0.897167586)); /* c9 */ + tmp11 = MULTIPLY(tmp11, FIX(0.666655658)); /* c11 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.410524528)); /* c13 */ + tmp0 = tmp1 + tmp2 + tmp3 - + MULTIPLY(z1, FIX(2.286341144)); /* c7+c5+c3-c1 */ + tmp13 = tmp10 + tmp11 + tmp12 - + MULTIPLY(z1, FIX(1.835730603)); /* c9+c11+c13-c15 */ + z1 = MULTIPLY(z2 + z3, FIX(0.138617169)); /* c15 */ + tmp1 += z1 + MULTIPLY(z2, FIX(0.071888074)); /* c9+c11-c3-c15 */ + tmp2 += z1 - MULTIPLY(z3, FIX(1.125726048)); /* c5+c7+c15-c3 */ + z1 = MULTIPLY(z3 - z2, FIX(1.407403738)); /* c1 */ + tmp11 += z1 - MULTIPLY(z3, FIX(0.766367282)); /* c1+c11-c9-c13 */ + tmp12 += z1 + MULTIPLY(z2, FIX(1.971951411)); /* c1+c5+c13-c7 */ + z2 += z4; + z1 = MULTIPLY(z2, - FIX(0.666655658)); /* -c11 */ + tmp1 += z1; + tmp3 += z1 + MULTIPLY(z4, FIX(1.065388962)); /* c3+c11+c15-c7 */ + z2 = MULTIPLY(z2, - FIX(1.247225013)); /* -c5 */ + tmp10 += z2 + MULTIPLY(z4, FIX(3.141271809)); /* c1+c5+c9-c13 */ + tmp12 += z2; + z2 = MULTIPLY(z3 + z4, - FIX(1.353318001)); /* -c3 */ + tmp2 += z2; + tmp3 += z2; + z2 = MULTIPLY(z4 - z3, FIX(0.410524528)); /* c13 */ + tmp10 += z2; + tmp11 += z2; + + /* Final output stage */ + + wsptr[8*0] = (int) RIGHT_SHIFT(tmp20 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*15] = (int) RIGHT_SHIFT(tmp20 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[8*1] = (int) RIGHT_SHIFT(tmp21 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*14] = (int) RIGHT_SHIFT(tmp21 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[8*2] = (int) RIGHT_SHIFT(tmp22 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*13] = (int) RIGHT_SHIFT(tmp22 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[8*3] = (int) RIGHT_SHIFT(tmp23 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*12] = (int) RIGHT_SHIFT(tmp23 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[8*4] = (int) RIGHT_SHIFT(tmp24 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*11] = (int) RIGHT_SHIFT(tmp24 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[8*5] = (int) RIGHT_SHIFT(tmp25 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*10] = (int) RIGHT_SHIFT(tmp25 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[8*6] = (int) RIGHT_SHIFT(tmp26 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*9] = (int) RIGHT_SHIFT(tmp26 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[8*7] = (int) RIGHT_SHIFT(tmp27 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[8*8] = (int) RIGHT_SHIFT(tmp27 - tmp13, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process rows from work array, store into output array. */ + /* Note that we must descale the results by a factor of 8 == 2**3, */ + /* and also undo the PASS1_BITS scaling. */ + + wsptr = workspace; + for (ctr = 0; ctr < 16; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = (INT32) wsptr[2]; + z3 = (INT32) wsptr[6]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + /* Add fudge factor here for final descale. */ + z2 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + z3 = (INT32) wsptr[4]; + + tmp0 = (z2 + z3) << CONST_BITS; + tmp1 = (z2 - z3) << CONST_BITS; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = (INT32) wsptr[7]; + tmp1 = (INT32) wsptr[5]; + tmp2 = (INT32) wsptr[3]; + tmp3 = (INT32) wsptr[1]; + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[7] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp3, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp1, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp13 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp13 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += DCTSIZE; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 7x14 output block. + * + * 14-point IDCT in pass 1 (columns), 7-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_7x14 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15, tmp16; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25, tmp26; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[7*14]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 14-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/28). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 7; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z1 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z1 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 = MULTIPLY(z4, FIX(1.274162392)); /* c4 */ + z3 = MULTIPLY(z4, FIX(0.314692123)); /* c12 */ + z4 = MULTIPLY(z4, FIX(0.881747734)); /* c8 */ + + tmp10 = z1 + z2; + tmp11 = z1 + z3; + tmp12 = z1 - z4; + + tmp23 = RIGHT_SHIFT(z1 - ((z2 + z3 - z4) << 1), /* c0 = (c4+c12-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z3 = MULTIPLY(z1 + z2, FIX(1.105676686)); /* c6 */ + + tmp13 = z3 + MULTIPLY(z1, FIX(0.273079590)); /* c2-c6 */ + tmp14 = z3 - MULTIPLY(z2, FIX(1.719280954)); /* c6+c10 */ + tmp15 = MULTIPLY(z1, FIX(0.613604268)) - /* c10 */ + MULTIPLY(z2, FIX(1.378756276)); /* c2 */ + + tmp20 = tmp10 + tmp13; + tmp26 = tmp10 - tmp13; + tmp21 = tmp11 + tmp14; + tmp25 = tmp11 - tmp14; + tmp22 = tmp12 + tmp15; + tmp24 = tmp12 - tmp15; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp13 = z4 << CONST_BITS; + + tmp14 = z1 + z3; + tmp11 = MULTIPLY(z1 + z2, FIX(1.334852607)); /* c3 */ + tmp12 = MULTIPLY(tmp14, FIX(1.197448846)); /* c5 */ + tmp10 = tmp11 + tmp12 + tmp13 - MULTIPLY(z1, FIX(1.126980169)); /* c3+c5-c1 */ + tmp14 = MULTIPLY(tmp14, FIX(0.752406978)); /* c9 */ + tmp16 = tmp14 - MULTIPLY(z1, FIX(1.061150426)); /* c9+c11-c13 */ + z1 -= z2; + tmp15 = MULTIPLY(z1, FIX(0.467085129)) - tmp13; /* c11 */ + tmp16 += tmp15; + z1 += z4; + z4 = MULTIPLY(z2 + z3, - FIX(0.158341681)) - tmp13; /* -c13 */ + tmp11 += z4 - MULTIPLY(z2, FIX(0.424103948)); /* c3-c9-c13 */ + tmp12 += z4 - MULTIPLY(z3, FIX(2.373959773)); /* c3+c5-c13 */ + z4 = MULTIPLY(z3 - z2, FIX(1.405321284)); /* c1 */ + tmp14 += z4 + tmp13 - MULTIPLY(z3, FIX(1.6906431334)); /* c1+c9-c11 */ + tmp15 += z4 + MULTIPLY(z2, FIX(0.674957567)); /* c1+c11-c5 */ + + tmp13 = (z1 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[7*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*13] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[7*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*12] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[7*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*11] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[7*3] = (int) (tmp23 + tmp13); + wsptr[7*10] = (int) (tmp23 - tmp13); + wsptr[7*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*9] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[7*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*8] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + wsptr[7*6] = (int) RIGHT_SHIFT(tmp26 + tmp16, CONST_BITS-PASS1_BITS); + wsptr[7*7] = (int) RIGHT_SHIFT(tmp26 - tmp16, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 14 rows from work array, store into output array. + * 7-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/14). + */ + wsptr = workspace; + for (ctr = 0; ctr < 14; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp23 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp23 <<= CONST_BITS; + + z1 = (INT32) wsptr[2]; + z2 = (INT32) wsptr[4]; + z3 = (INT32) wsptr[6]; + + tmp20 = MULTIPLY(z2 - z3, FIX(0.881747734)); /* c4 */ + tmp22 = MULTIPLY(z1 - z2, FIX(0.314692123)); /* c6 */ + tmp21 = tmp20 + tmp22 + tmp23 - MULTIPLY(z2, FIX(1.841218003)); /* c2+c4-c6 */ + tmp10 = z1 + z3; + z2 -= tmp10; + tmp10 = MULTIPLY(tmp10, FIX(1.274162392)) + tmp23; /* c2 */ + tmp20 += tmp10 - MULTIPLY(z3, FIX(0.077722536)); /* c2-c4-c6 */ + tmp22 += tmp10 - MULTIPLY(z1, FIX(2.470602249)); /* c2+c4+c6 */ + tmp23 += MULTIPLY(z2, FIX(1.414213562)); /* c0 */ + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + + tmp11 = MULTIPLY(z1 + z2, FIX(0.935414347)); /* (c3+c1-c5)/2 */ + tmp12 = MULTIPLY(z1 - z2, FIX(0.170262339)); /* (c3+c5-c1)/2 */ + tmp10 = tmp11 - tmp12; + tmp11 += tmp12; + tmp12 = MULTIPLY(z2 + z3, - FIX(1.378756276)); /* -c1 */ + tmp11 += tmp12; + z2 = MULTIPLY(z1 + z3, FIX(0.613604268)); /* c5 */ + tmp10 += z2; + tmp12 += z2 + MULTIPLY(z3, FIX(1.870828693)); /* c3+c1-c5 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[6] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp23, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 7; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 6x12 output block. + * + * 12-point IDCT in pass 1 (columns), 6-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_6x12 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14, tmp15; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24, tmp25; + INT32 z1, z2, z3, z4; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[6*12]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 12-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/24). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z4 = MULTIPLY(z4, FIX(1.224744871)); /* c4 */ + + tmp10 = z3 + z4; + tmp11 = z3 - z4; + + z1 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z4 = MULTIPLY(z1, FIX(1.366025404)); /* c2 */ + z1 <<= CONST_BITS; + z2 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + z2 <<= CONST_BITS; + + tmp12 = z1 - z2; + + tmp21 = z3 + tmp12; + tmp24 = z3 - tmp12; + + tmp12 = z4 + z2; + + tmp20 = tmp10 + tmp12; + tmp25 = tmp10 - tmp12; + + tmp12 = z4 - z1 - z2; + + tmp22 = tmp11 + tmp12; + tmp23 = tmp11 - tmp12; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = MULTIPLY(z2, FIX(1.306562965)); /* c3 */ + tmp14 = MULTIPLY(z2, - FIX_0_541196100); /* -c9 */ + + tmp10 = z1 + z3; + tmp15 = MULTIPLY(tmp10 + z4, FIX(0.860918669)); /* c7 */ + tmp12 = tmp15 + MULTIPLY(tmp10, FIX(0.261052384)); /* c5-c7 */ + tmp10 = tmp12 + tmp11 + MULTIPLY(z1, FIX(0.280143716)); /* c1-c5 */ + tmp13 = MULTIPLY(z3 + z4, - FIX(1.045510580)); /* -(c7+c11) */ + tmp12 += tmp13 + tmp14 - MULTIPLY(z3, FIX(1.478575242)); /* c1+c5-c7-c11 */ + tmp13 += tmp15 - tmp11 + MULTIPLY(z4, FIX(1.586706681)); /* c1+c11 */ + tmp15 += tmp14 - MULTIPLY(z1, FIX(0.676326758)) - /* c7-c11 */ + MULTIPLY(z4, FIX(1.982889723)); /* c5+c7 */ + + z1 -= z4; + z2 -= z3; + z3 = MULTIPLY(z1 + z2, FIX_0_541196100); /* c9 */ + tmp11 = z3 + MULTIPLY(z1, FIX_0_765366865); /* c3-c9 */ + tmp14 = z3 - MULTIPLY(z2, FIX_1_847759065); /* c3+c9 */ + + /* Final output stage */ + + wsptr[6*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*11] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[6*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*10] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[6*2] = (int) RIGHT_SHIFT(tmp22 + tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*9] = (int) RIGHT_SHIFT(tmp22 - tmp12, CONST_BITS-PASS1_BITS); + wsptr[6*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*8] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[6*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*7] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + wsptr[6*5] = (int) RIGHT_SHIFT(tmp25 + tmp15, CONST_BITS-PASS1_BITS); + wsptr[6*6] = (int) RIGHT_SHIFT(tmp25 - tmp15, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 12 rows from work array, store into output array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + wsptr = workspace; + for (ctr = 0; ctr < 12; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp10 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp10 <<= CONST_BITS; + tmp12 = (INT32) wsptr[4]; + tmp20 = MULTIPLY(tmp12, FIX(0.707106781)); /* c4 */ + tmp11 = tmp10 + tmp20; + tmp21 = tmp10 - tmp20 - tmp20; + tmp20 = (INT32) wsptr[2]; + tmp10 = MULTIPLY(tmp20, FIX(1.224744871)); /* c2 */ + tmp20 = tmp11 + tmp10; + tmp22 = tmp11 - tmp10; + + /* Odd part */ + + z1 = (INT32) wsptr[1]; + z2 = (INT32) wsptr[3]; + z3 = (INT32) wsptr[5]; + tmp11 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp10 = tmp11 + ((z1 + z2) << CONST_BITS); + tmp12 = tmp11 + ((z3 - z2) << CONST_BITS); + tmp11 = (z1 - z2 - z3) << CONST_BITS; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp20 + tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[5] = range_limit[(int) RIGHT_SHIFT(tmp20 - tmp10, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp21 + tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp21 - tmp11, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp22 + tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp22 - tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 6; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 5x10 output block. + * + * 10-point IDCT in pass 1 (columns), 5-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_5x10 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp10, tmp11, tmp12, tmp13, tmp14; + INT32 tmp20, tmp21, tmp22, tmp23, tmp24; + INT32 z1, z2, z3, z4, z5; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[5*10]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 10-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/20). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 5; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + z3 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z3 += ONE << (CONST_BITS-PASS1_BITS-1); + z4 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z1 = MULTIPLY(z4, FIX(1.144122806)); /* c4 */ + z2 = MULTIPLY(z4, FIX(0.437016024)); /* c8 */ + tmp10 = z3 + z1; + tmp11 = z3 - z2; + + tmp22 = RIGHT_SHIFT(z3 - ((z1 - z2) << 1), /* c0 = (c4-c8)*2 */ + CONST_BITS-PASS1_BITS); + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c6 */ + tmp12 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c2-c6 */ + tmp13 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c2+c6 */ + + tmp20 = tmp10 + tmp12; + tmp24 = tmp10 - tmp12; + tmp21 = tmp11 + tmp13; + tmp23 = tmp11 - tmp13; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + z4 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + + tmp11 = z2 + z4; + tmp13 = z2 - z4; + + tmp12 = MULTIPLY(tmp13, FIX(0.309016994)); /* (c3-c7)/2 */ + z5 = z3 << CONST_BITS; + + z2 = MULTIPLY(tmp11, FIX(0.951056516)); /* (c3+c7)/2 */ + z4 = z5 + tmp12; + + tmp10 = MULTIPLY(z1, FIX(1.396802247)) + z2 + z4; /* c1 */ + tmp14 = MULTIPLY(z1, FIX(0.221231742)) - z2 + z4; /* c9 */ + + z2 = MULTIPLY(tmp11, FIX(0.587785252)); /* (c1-c9)/2 */ + z4 = z5 - tmp12 - (tmp13 << (CONST_BITS - 1)); + + tmp12 = (z1 - tmp13 - z3) << PASS1_BITS; + + tmp11 = MULTIPLY(z1, FIX(1.260073511)) - z2 - z4; /* c3 */ + tmp13 = MULTIPLY(z1, FIX(0.642039522)) - z2 + z4; /* c7 */ + + /* Final output stage */ + + wsptr[5*0] = (int) RIGHT_SHIFT(tmp20 + tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*9] = (int) RIGHT_SHIFT(tmp20 - tmp10, CONST_BITS-PASS1_BITS); + wsptr[5*1] = (int) RIGHT_SHIFT(tmp21 + tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*8] = (int) RIGHT_SHIFT(tmp21 - tmp11, CONST_BITS-PASS1_BITS); + wsptr[5*2] = (int) (tmp22 + tmp12); + wsptr[5*7] = (int) (tmp22 - tmp12); + wsptr[5*3] = (int) RIGHT_SHIFT(tmp23 + tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*6] = (int) RIGHT_SHIFT(tmp23 - tmp13, CONST_BITS-PASS1_BITS); + wsptr[5*4] = (int) RIGHT_SHIFT(tmp24 + tmp14, CONST_BITS-PASS1_BITS); + wsptr[5*5] = (int) RIGHT_SHIFT(tmp24 - tmp14, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 10 rows from work array, store into output array. + * 5-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/10). + */ + wsptr = workspace; + for (ctr = 0; ctr < 10; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp12 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp12 <<= CONST_BITS; + tmp13 = (INT32) wsptr[2]; + tmp14 = (INT32) wsptr[4]; + z1 = MULTIPLY(tmp13 + tmp14, FIX(0.790569415)); /* (c2+c4)/2 */ + z2 = MULTIPLY(tmp13 - tmp14, FIX(0.353553391)); /* (c2-c4)/2 */ + z3 = tmp12 + z2; + tmp10 = z3 + z1; + tmp11 = z3 - z1; + tmp12 -= z2 << 2; + + /* Odd part */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX(0.831253876)); /* c3 */ + tmp13 = z1 + MULTIPLY(z2, FIX(0.513743148)); /* c1-c3 */ + tmp14 = z1 - MULTIPLY(z3, FIX(2.176250899)); /* c1+c3 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[4] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp13, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp11 + tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp11 - tmp14, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 5; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 4x8 output block. + * + * 8-point IDCT in pass 1 (columns), 4-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_4x8 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp3; + INT32 tmp10, tmp11, tmp12, tmp13; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[4*8]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. */ + /* Note results are scaled up by sqrt(8) compared to a true IDCT; */ + /* furthermore, we scale the results by 2**PASS1_BITS. */ + + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 4; ctr > 0; ctr--) { + /* Due to quantization, we will usually find that many of the input + * coefficients are zero, especially the AC terms. We can exploit this + * by short-circuiting the IDCT calculation for any column in which all + * the AC terms are zero. In that case each output is equal to the + * DC coefficient (with scale factor as needed). + * With typical images and quantization tables, half or more of the + * column DCT calculations can be simplified this way. + */ + + if (inptr[DCTSIZE*1] == 0 && inptr[DCTSIZE*2] == 0 && + inptr[DCTSIZE*3] == 0 && inptr[DCTSIZE*4] == 0 && + inptr[DCTSIZE*5] == 0 && inptr[DCTSIZE*6] == 0 && + inptr[DCTSIZE*7] == 0) { + /* AC terms all zero */ + int dcval = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]) << PASS1_BITS; + + wsptr[4*0] = dcval; + wsptr[4*1] = dcval; + wsptr[4*2] = dcval; + wsptr[4*3] = dcval; + wsptr[4*4] = dcval; + wsptr[4*5] = dcval; + wsptr[4*6] = dcval; + wsptr[4*7] = dcval; + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + continue; + } + + /* Even part: reverse the even part of the forward DCT. */ + /* The rotator is sqrt(2)*c(-6). */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + z3 = DEQUANTIZE(inptr[DCTSIZE*6], quantptr[DCTSIZE*6]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); + tmp2 = z1 + MULTIPLY(z2, FIX_0_765366865); + tmp3 = z1 - MULTIPLY(z3, FIX_1_847759065); + + z2 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + z3 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + z2 <<= CONST_BITS; + z3 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + z2 += ONE << (CONST_BITS-PASS1_BITS-1); + + tmp0 = z2 + z3; + tmp1 = z2 - z3; + + tmp10 = tmp0 + tmp2; + tmp13 = tmp0 - tmp2; + tmp11 = tmp1 + tmp3; + tmp12 = tmp1 - tmp3; + + /* Odd part per figure 8; the matrix is unitary and hence its + * transpose is its inverse. i0..i3 are y7,y5,y3,y1 respectively. + */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*7], quantptr[DCTSIZE*7]); + tmp1 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + tmp3 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + + z2 = tmp0 + tmp2; + z3 = tmp1 + tmp3; + + z1 = MULTIPLY(z2 + z3, FIX_1_175875602); /* sqrt(2) * c3 */ + z2 = MULTIPLY(z2, - FIX_1_961570560); /* sqrt(2) * (-c3-c5) */ + z3 = MULTIPLY(z3, - FIX_0_390180644); /* sqrt(2) * (c5-c3) */ + z2 += z1; + z3 += z1; + + z1 = MULTIPLY(tmp0 + tmp3, - FIX_0_899976223); /* sqrt(2) * (c7-c3) */ + tmp0 = MULTIPLY(tmp0, FIX_0_298631336); /* sqrt(2) * (-c1+c3+c5-c7) */ + tmp3 = MULTIPLY(tmp3, FIX_1_501321110); /* sqrt(2) * ( c1+c3-c5-c7) */ + tmp0 += z1 + z2; + tmp3 += z1 + z3; + + z1 = MULTIPLY(tmp1 + tmp2, - FIX_2_562915447); /* sqrt(2) * (-c1-c3) */ + tmp1 = MULTIPLY(tmp1, FIX_2_053119869); /* sqrt(2) * ( c1+c3-c5+c7) */ + tmp2 = MULTIPLY(tmp2, FIX_3_072711026); /* sqrt(2) * ( c1+c3+c5-c7) */ + tmp1 += z1 + z3; + tmp2 += z1 + z2; + + /* Final output stage: inputs are tmp10..tmp13, tmp0..tmp3 */ + + wsptr[4*0] = (int) RIGHT_SHIFT(tmp10 + tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*7] = (int) RIGHT_SHIFT(tmp10 - tmp3, CONST_BITS-PASS1_BITS); + wsptr[4*1] = (int) RIGHT_SHIFT(tmp11 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*6] = (int) RIGHT_SHIFT(tmp11 - tmp2, CONST_BITS-PASS1_BITS); + wsptr[4*2] = (int) RIGHT_SHIFT(tmp12 + tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*5] = (int) RIGHT_SHIFT(tmp12 - tmp1, CONST_BITS-PASS1_BITS); + wsptr[4*3] = (int) RIGHT_SHIFT(tmp13 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[4*4] = (int) RIGHT_SHIFT(tmp13 - tmp0, CONST_BITS-PASS1_BITS); + + inptr++; /* advance pointers to next column */ + quantptr++; + wsptr++; + } + + /* Pass 2: process 8 rows from work array, store into output array. + * 4-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/16). + */ + wsptr = workspace; + for (ctr = 0; ctr < 8; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp2 = (INT32) wsptr[2]; + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = (INT32) wsptr[1]; + z3 = (INT32) wsptr[3]; + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[3] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp12 + tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp12 - tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 4; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a reduced-size 3x6 output block. + * + * 6-point IDCT in pass 1 (columns), 3-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_3x6 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp1, tmp2, tmp10, tmp11, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + int * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + int workspace[3*6]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 6-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/12). + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 3; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp0 <<= CONST_BITS; + /* Add fudge factor here for final descale. */ + tmp0 += ONE << (CONST_BITS-PASS1_BITS-1); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*4], quantptr[DCTSIZE*4]); + tmp10 = MULTIPLY(tmp2, FIX(0.707106781)); /* c4 */ + tmp1 = tmp0 + tmp10; + tmp11 = RIGHT_SHIFT(tmp0 - tmp10 - tmp10, CONST_BITS-PASS1_BITS); + tmp10 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + tmp0 = MULTIPLY(tmp10, FIX(1.224744871)); /* c2 */ + tmp10 = tmp1 + tmp0; + tmp12 = tmp1 - tmp0; + + /* Odd part */ + + z1 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z2 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + z3 = DEQUANTIZE(inptr[DCTSIZE*5], quantptr[DCTSIZE*5]); + tmp1 = MULTIPLY(z1 + z3, FIX(0.366025404)); /* c5 */ + tmp0 = tmp1 + ((z1 + z2) << CONST_BITS); + tmp2 = tmp1 + ((z3 - z2) << CONST_BITS); + tmp1 = (z1 - z2 - z3) << PASS1_BITS; + + /* Final output stage */ + + wsptr[3*0] = (int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*5] = (int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS-PASS1_BITS); + wsptr[3*1] = (int) (tmp11 + tmp1); + wsptr[3*4] = (int) (tmp11 - tmp1); + wsptr[3*2] = (int) RIGHT_SHIFT(tmp12 + tmp2, CONST_BITS-PASS1_BITS); + wsptr[3*3] = (int) RIGHT_SHIFT(tmp12 - tmp2, CONST_BITS-PASS1_BITS); + } + + /* Pass 2: process 6 rows from work array, store into output array. + * 3-point IDCT kernel, cK represents sqrt(2) * cos(K*pi/6). + */ + wsptr = workspace; + for (ctr = 0; ctr < 6; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp0 = (INT32) wsptr[0] + (ONE << (PASS1_BITS+2)); + tmp0 <<= CONST_BITS; + tmp2 = (INT32) wsptr[2]; + tmp12 = MULTIPLY(tmp2, FIX(0.707106781)); /* c2 */ + tmp10 = tmp0 + tmp12; + tmp2 = tmp0 - tmp12 - tmp12; + + /* Odd part */ + + tmp12 = (INT32) wsptr[1]; + tmp0 = MULTIPLY(tmp12, FIX(1.224744871)); /* c1 */ + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[2] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp2, + CONST_BITS+PASS1_BITS+3) + & RANGE_MASK]; + + wsptr += 3; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 2x4 output block. + * + * 4-point IDCT in pass 1 (columns), 2-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_2x4 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp2, tmp10, tmp12; + INT32 z1, z2, z3; + JCOEFPTR inptr; + ISLOW_MULT_TYPE * quantptr; + INT32 * wsptr; + JSAMPROW outptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + int ctr; + INT32 workspace[2*4]; /* buffers data between passes */ + SHIFT_TEMPS + + /* Pass 1: process columns from input, store into work array. + * 4-point IDCT kernel, + * cK represents sqrt(2) * cos(K*pi/16) [refers to 8-point IDCT]. + */ + inptr = coef_block; + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + wsptr = workspace; + for (ctr = 0; ctr < 2; ctr++, inptr++, quantptr++, wsptr++) { + /* Even part */ + + tmp0 = DEQUANTIZE(inptr[DCTSIZE*0], quantptr[DCTSIZE*0]); + tmp2 = DEQUANTIZE(inptr[DCTSIZE*2], quantptr[DCTSIZE*2]); + + tmp10 = (tmp0 + tmp2) << CONST_BITS; + tmp12 = (tmp0 - tmp2) << CONST_BITS; + + /* Odd part */ + /* Same rotation as in the even part of the 8x8 LL&M IDCT */ + + z2 = DEQUANTIZE(inptr[DCTSIZE*1], quantptr[DCTSIZE*1]); + z3 = DEQUANTIZE(inptr[DCTSIZE*3], quantptr[DCTSIZE*3]); + + z1 = MULTIPLY(z2 + z3, FIX_0_541196100); /* c6 */ + tmp0 = z1 + MULTIPLY(z2, FIX_0_765366865); /* c2-c6 */ + tmp2 = z1 - MULTIPLY(z3, FIX_1_847759065); /* c2+c6 */ + + /* Final output stage */ + + wsptr[2*0] = tmp10 + tmp0; + wsptr[2*3] = tmp10 - tmp0; + wsptr[2*1] = tmp12 + tmp2; + wsptr[2*2] = tmp12 - tmp2; + } + + /* Pass 2: process 4 rows from work array, store into output array. */ + + wsptr = workspace; + for (ctr = 0; ctr < 4; ctr++) { + outptr = output_buf[ctr] + output_col; + + /* Even part */ + + /* Add fudge factor here for final descale. */ + tmp10 = wsptr[0] + (ONE << (CONST_BITS+2)); + + /* Odd part */ + + tmp0 = wsptr[1]; + + /* Final output stage */ + + outptr[0] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, CONST_BITS+3) + & RANGE_MASK]; + outptr[1] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, CONST_BITS+3) + & RANGE_MASK]; + + wsptr += 2; /* advance pointer to next row */ + } +} + + +/* + * Perform dequantization and inverse DCT on one block of coefficients, + * producing a 1x2 output block. + * + * 2-point IDCT in pass 1 (columns), 1-point in pass 2 (rows). + */ + +GLOBAL(void) +jpeg_idct_1x2 (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col) +{ + INT32 tmp0, tmp10; + ISLOW_MULT_TYPE * quantptr; + JSAMPLE *range_limit = IDCT_range_limit(cinfo); + SHIFT_TEMPS + + /* Process 1 column from input, store into output array. */ + + quantptr = (ISLOW_MULT_TYPE *) compptr->dct_table; + + /* Even part */ + + tmp10 = DEQUANTIZE(coef_block[DCTSIZE*0], quantptr[DCTSIZE*0]); + /* Add fudge factor here for final descale. */ + tmp10 += ONE << 2; + + /* Odd part */ + + tmp0 = DEQUANTIZE(coef_block[DCTSIZE*1], quantptr[DCTSIZE*1]); + + /* Final output stage */ + + output_buf[0][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 + tmp0, 3) + & RANGE_MASK]; + output_buf[1][output_col] = range_limit[(int) RIGHT_SHIFT(tmp10 - tmp0, 3) + & RANGE_MASK]; +} + +#endif /* IDCT_SCALING_SUPPORTED */ +#endif /* DCT_ISLOW_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jinclude.h b/src/3rdparty/libjpeg/jinclude.h new file mode 100644 index 0000000..0a4f151 --- /dev/null +++ b/src/3rdparty/libjpeg/jinclude.h @@ -0,0 +1,91 @@ +/* + * jinclude.h + * + * Copyright (C) 1991-1994, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file exists to provide a single place to fix any problems with + * including the wrong system include files. (Common problems are taken + * care of by the standard jconfig symbols, but on really weird systems + * you may have to edit this file.) + * + * NOTE: this file is NOT intended to be included by applications using the + * JPEG library. Most applications need only include jpeglib.h. + */ + + +/* Include auto-config file to find out which system include files we need. */ + +#include "jconfig.h" /* auto configuration options */ +#define JCONFIG_INCLUDED /* so that jpeglib.h doesn't do it again */ + +/* + * We need the NULL macro and size_t typedef. + * On an ANSI-conforming system it is sufficient to include . + * Otherwise, we get them from or ; we may have to + * pull in as well. + * Note that the core JPEG library does not require ; + * only the default error handler and data source/destination modules do. + * But we must pull it in because of the references to FILE in jpeglib.h. + * You can remove those references if you want to compile without . + */ + +#ifdef HAVE_STDDEF_H +#include +#endif + +#ifdef HAVE_STDLIB_H +#include +#endif + +#ifdef NEED_SYS_TYPES_H +#include +#endif + +#include + +/* + * We need memory copying and zeroing functions, plus strncpy(). + * ANSI and System V implementations declare these in . + * BSD doesn't have the mem() functions, but it does have bcopy()/bzero(). + * Some systems may declare memset and memcpy in . + * + * NOTE: we assume the size parameters to these functions are of type size_t. + * Change the casts in these macros if not! + */ + +#ifdef NEED_BSD_STRINGS + +#include +#define MEMZERO(target,size) bzero((void *)(target), (size_t)(size)) +#define MEMCOPY(dest,src,size) bcopy((const void *)(src), (void *)(dest), (size_t)(size)) + +#else /* not BSD, assume ANSI/SysV string lib */ + +#include +#define MEMZERO(target,size) memset((void *)(target), 0, (size_t)(size)) +#define MEMCOPY(dest,src,size) memcpy((void *)(dest), (const void *)(src), (size_t)(size)) + +#endif + +/* + * In ANSI C, and indeed any rational implementation, size_t is also the + * type returned by sizeof(). However, it seems there are some irrational + * implementations out there, in which sizeof() returns an int even though + * size_t is defined as long or unsigned long. To ensure consistent results + * we always use this SIZEOF() macro in place of using sizeof() directly. + */ + +#define SIZEOF(object) ((size_t) sizeof(object)) + +/* + * The modules that use fread() and fwrite() always invoke them through + * these macros. On some systems you may need to twiddle the argument casts. + * CAUTION: argument order is different from underlying functions! + */ + +#define JFREAD(file,buf,sizeofbuf) \ + ((size_t) fread((void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) +#define JFWRITE(file,buf,sizeofbuf) \ + ((size_t) fwrite((const void *) (buf), (size_t) 1, (size_t) (sizeofbuf), (file))) diff --git a/src/3rdparty/libjpeg/jmemansi.c b/src/3rdparty/libjpeg/jmemansi.c new file mode 100644 index 0000000..2d93e49 --- /dev/null +++ b/src/3rdparty/libjpeg/jmemansi.c @@ -0,0 +1,167 @@ +/* + * jmemansi.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a simple generic implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that you have the ANSI-standard library routine tmpfile(). + * Also, the problem of determining the amount of memory available + * is shoved onto the user. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); + /* Since this implementation uses tmpfile() to create the file, + * no explicit file deletion is needed. + */ +} + + +/* + * Initial opening of a backing-store object. + * + * This version uses tmpfile(), which constructs a suitable file name + * behind the scenes. We don't have to use info->temp_name[] at all; + * indeed, we can't even find out the actual name of the temp file. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + if ((info->temp_file = tmpfile()) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/3rdparty/libjpeg/jmemdos.c b/src/3rdparty/libjpeg/jmemdos.c new file mode 100644 index 0000000..60b45c6 --- /dev/null +++ b/src/3rdparty/libjpeg/jmemdos.c @@ -0,0 +1,638 @@ +/* + * jmemdos.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides an MS-DOS-compatible implementation of the system- + * dependent portion of the JPEG memory manager. Temporary data can be + * stored in extended or expanded memory as well as in regular DOS files. + * + * If you use this file, you must be sure that NEED_FAR_POINTERS is defined + * if you compile in a small-data memory model; it should NOT be defined if + * you use a large-data memory model. This file is not recommended if you + * are using a flat-memory-space 386 environment such as DJGCC or Watcom C. + * Also, this code will NOT work if struct fields are aligned on greater than + * 2-byte boundaries. + * + * Based on code contributed by Ge' Weijers. + */ + +/* + * If you have both extended and expanded memory, you may want to change the + * order in which they are tried in jopen_backing_store. On a 286 machine + * expanded memory is usually faster, since extended memory access involves + * an expensive protected-mode-and-back switch. On 386 and better, extended + * memory is usually faster. As distributed, the code tries extended memory + * first (what? not everyone has a 386? :-). + * + * You can disable use of extended/expanded memory entirely by altering these + * definitions or overriding them from the Makefile (eg, -DEMS_SUPPORTED=0). + */ + +#ifndef XMS_SUPPORTED +#define XMS_SUPPORTED 1 +#endif +#ifndef EMS_SUPPORTED +#define EMS_SUPPORTED 1 +#endif + + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare these */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +extern char * getenv JPP((const char * name)); +#endif + +#ifdef NEED_FAR_POINTERS + +#ifdef __TURBOC__ +/* These definitions work for Borland C (Turbo C) */ +#include /* need farmalloc(), farfree() */ +#define far_malloc(x) farmalloc(x) +#define far_free(x) farfree(x) +#else +/* These definitions work for Microsoft C and compatible compilers */ +#include /* need _fmalloc(), _ffree() */ +#define far_malloc(x) _fmalloc(x) +#define far_free(x) _ffree(x) +#endif + +#else /* not NEED_FAR_POINTERS */ + +#define far_malloc(x) malloc(x) +#define far_free(x) free(x) + +#endif /* NEED_FAR_POINTERS */ + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#else +#define READ_BINARY "rb" +#endif + +#ifndef USE_MSDOS_MEMMGR /* make sure user got configuration right */ + You forgot to define USE_MSDOS_MEMMGR in jconfig.h. /* deliberate syntax error */ +#endif + +#if MAX_ALLOC_CHUNK >= 65535L /* make sure jconfig.h got this right */ + MAX_ALLOC_CHUNK should be less than 64K. /* deliberate syntax error */ +#endif + + +/* + * Declarations for assembly-language support routines (see jmemdosa.asm). + * + * The functions are declared "far" as are all their pointer arguments; + * this ensures the assembly source code will work regardless of the + * compiler memory model. We assume "short" is 16 bits, "long" is 32. + */ + +typedef void far * XMSDRIVER; /* actually a pointer to code */ +typedef struct { /* registers for calling XMS driver */ + unsigned short ax, dx, bx; + void far * ds_si; + } XMScontext; +typedef struct { /* registers for calling EMS driver */ + unsigned short ax, dx, bx; + void far * ds_si; + } EMScontext; + +extern short far jdos_open JPP((short far * handle, char far * filename)); +extern short far jdos_close JPP((short handle)); +extern short far jdos_seek JPP((short handle, long offset)); +extern short far jdos_read JPP((short handle, void far * buffer, + unsigned short count)); +extern short far jdos_write JPP((short handle, void far * buffer, + unsigned short count)); +extern void far jxms_getdriver JPP((XMSDRIVER far *)); +extern void far jxms_calldriver JPP((XMSDRIVER, XMScontext far *)); +extern short far jems_available JPP((void)); +extern void far jems_calldriver JPP((EMScontext far *)); + + +/* + * Selection of a file name for a temporary file. + * This is highly system-dependent, and you may want to customize it. + */ + +static int next_file_num; /* to distinguish among several temp files */ + +LOCAL(void) +select_file_name (char * fname) +{ + const char * env; + char * ptr; + FILE * tfile; + + /* Keep generating file names till we find one that's not in use */ + for (;;) { + /* Get temp directory name from environment TMP or TEMP variable; + * if none, use "." + */ + if ((env = (const char *) getenv("TMP")) == NULL) + if ((env = (const char *) getenv("TEMP")) == NULL) + env = "."; + if (*env == '\0') /* null string means "." */ + env = "."; + ptr = fname; /* copy name to fname */ + while (*env != '\0') + *ptr++ = *env++; + if (ptr[-1] != '\\' && ptr[-1] != '/') + *ptr++ = '\\'; /* append backslash if not in env variable */ + /* Append a suitable file name */ + next_file_num++; /* advance counter */ + sprintf(ptr, "JPG%03d.TMP", next_file_num); + /* Probe to see if file name is already in use */ + if ((tfile = fopen(fname, READ_BINARY)) == NULL) + break; + fclose(tfile); /* oops, it's there; close tfile & try again */ + } +} + + +/* + * Near-memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are allocated in far memory, if possible + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) far_malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + far_free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 300000L /* for total usage about 450K */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + +/* + * For MS-DOS we support three types of backing storage: + * 1. Conventional DOS files. We access these by direct DOS calls rather + * than via the stdio package. This provides a bit better performance, + * but the real reason is that the buffers to be read or written are FAR. + * The stdio library for small-data memory models can't cope with that. + * 2. Extended memory, accessed per the XMS V2.0 specification. + * 3. Expanded memory, accessed per the LIM/EMS 4.0 specification. + * You'll need copies of those specs to make sense of the related code. + * The specs are available by Internet FTP from the SIMTEL archives + * (oak.oakland.edu and its various mirror sites). See files + * pub/msdos/microsoft/xms20.arc and pub/msdos/info/limems41.zip. + */ + + +/* + * Access methods for a DOS file. + */ + + +METHODDEF(void) +read_file_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (jdos_seek(info->handle.file_handle, file_offset)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ + if (byte_count > 65535L) /* safety check */ + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + if (jdos_read(info->handle.file_handle, buffer_address, + (unsigned short) byte_count)) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_file_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (jdos_seek(info->handle.file_handle, file_offset)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + /* Since MAX_ALLOC_CHUNK is less than 64K, byte_count will be too. */ + if (byte_count > 65535L) /* safety check */ + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + if (jdos_write(info->handle.file_handle, buffer_address, + (unsigned short) byte_count)) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_file_store (j_common_ptr cinfo, backing_store_ptr info) +{ + jdos_close(info->handle.file_handle); /* close the file */ + remove(info->temp_name); /* delete the file */ +/* If your system doesn't have remove(), try unlink() instead. + * remove() is the ANSI-standard name for this function, but + * unlink() was more common in pre-ANSI systems. + */ + TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); +} + + +LOCAL(boolean) +open_file_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + short handle; + + select_file_name(info->temp_name); + if (jdos_open((short far *) & handle, (char far *) info->temp_name)) { + /* might as well exit since jpeg_open_backing_store will fail anyway */ + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + return FALSE; + } + info->handle.file_handle = handle; + info->read_backing_store = read_file_store; + info->write_backing_store = write_file_store; + info->close_backing_store = close_file_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); + return TRUE; /* succeeded */ +} + + +/* + * Access methods for extended memory. + */ + +#if XMS_SUPPORTED + +static XMSDRIVER xms_driver; /* saved address of XMS driver */ + +typedef union { /* either long offset or real-mode pointer */ + long offset; + void far * ptr; + } XMSPTR; + +typedef struct { /* XMS move specification structure */ + long length; + XMSH src_handle; + XMSPTR src; + XMSH dst_handle; + XMSPTR dst; + } XMSspec; + +#define ODD(X) (((X) & 1L) != 0) + + +METHODDEF(void) +read_xms_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + XMScontext ctx; + XMSspec spec; + char endbuffer[2]; + + /* The XMS driver can't cope with an odd length, so handle the last byte + * specially if byte_count is odd. We don't expect this to be common. + */ + + spec.length = byte_count & (~ 1L); + spec.src_handle = info->handle.xms_handle; + spec.src.offset = file_offset; + spec.dst_handle = 0; + spec.dst.ptr = buffer_address; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x0b00; /* EMB move */ + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + ERREXIT(cinfo, JERR_XMS_READ); + + if (ODD(byte_count)) { + read_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + ((char FAR *) buffer_address)[byte_count - 1L] = endbuffer[0]; + } +} + + +METHODDEF(void) +write_xms_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + XMScontext ctx; + XMSspec spec; + char endbuffer[2]; + + /* The XMS driver can't cope with an odd length, so handle the last byte + * specially if byte_count is odd. We don't expect this to be common. + */ + + spec.length = byte_count & (~ 1L); + spec.src_handle = 0; + spec.src.ptr = buffer_address; + spec.dst_handle = info->handle.xms_handle; + spec.dst.offset = file_offset; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x0b00; /* EMB move */ + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + ERREXIT(cinfo, JERR_XMS_WRITE); + + if (ODD(byte_count)) { + read_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + endbuffer[0] = ((char FAR *) buffer_address)[byte_count - 1L]; + write_xms_store(cinfo, info, (void FAR *) endbuffer, + file_offset + byte_count - 1L, 2L); + } +} + + +METHODDEF(void) +close_xms_store (j_common_ptr cinfo, backing_store_ptr info) +{ + XMScontext ctx; + + ctx.dx = info->handle.xms_handle; + ctx.ax = 0x0a00; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + TRACEMS1(cinfo, 1, JTRC_XMS_CLOSE, info->handle.xms_handle); + /* we ignore any error return from the driver */ +} + + +LOCAL(boolean) +open_xms_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + XMScontext ctx; + + /* Get address of XMS driver */ + jxms_getdriver((XMSDRIVER far *) & xms_driver); + if (xms_driver == NULL) + return FALSE; /* no driver to be had */ + + /* Get version number, must be >= 2.00 */ + ctx.ax = 0x0000; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax < (unsigned short) 0x0200) + return FALSE; + + /* Try to get space (expressed in kilobytes) */ + ctx.dx = (unsigned short) ((total_bytes_needed + 1023L) >> 10); + ctx.ax = 0x0900; + jxms_calldriver(xms_driver, (XMScontext far *) & ctx); + if (ctx.ax != 1) + return FALSE; + + /* Succeeded, save the handle and away we go */ + info->handle.xms_handle = ctx.dx; + info->read_backing_store = read_xms_store; + info->write_backing_store = write_xms_store; + info->close_backing_store = close_xms_store; + TRACEMS1(cinfo, 1, JTRC_XMS_OPEN, ctx.dx); + return TRUE; /* succeeded */ +} + +#endif /* XMS_SUPPORTED */ + + +/* + * Access methods for expanded memory. + */ + +#if EMS_SUPPORTED + +/* The EMS move specification structure requires word and long fields aligned + * at odd byte boundaries. Some compilers will align struct fields at even + * byte boundaries. While it's usually possible to force byte alignment, + * that causes an overall performance penalty and may pose problems in merging + * JPEG into a larger application. Instead we accept some rather dirty code + * here. Note this code would fail if the hardware did not allow odd-byte + * word & long accesses, but all 80x86 CPUs do. + */ + +typedef void far * EMSPTR; + +typedef union { /* EMS move specification structure */ + long length; /* It's easy to access first 4 bytes */ + char bytes[18]; /* Misaligned fields in here! */ + } EMSspec; + +/* Macros for accessing misaligned fields */ +#define FIELD_AT(spec,offset,type) (*((type *) &(spec.bytes[offset]))) +#define SRC_TYPE(spec) FIELD_AT(spec,4,char) +#define SRC_HANDLE(spec) FIELD_AT(spec,5,EMSH) +#define SRC_OFFSET(spec) FIELD_AT(spec,7,unsigned short) +#define SRC_PAGE(spec) FIELD_AT(spec,9,unsigned short) +#define SRC_PTR(spec) FIELD_AT(spec,7,EMSPTR) +#define DST_TYPE(spec) FIELD_AT(spec,11,char) +#define DST_HANDLE(spec) FIELD_AT(spec,12,EMSH) +#define DST_OFFSET(spec) FIELD_AT(spec,14,unsigned short) +#define DST_PAGE(spec) FIELD_AT(spec,16,unsigned short) +#define DST_PTR(spec) FIELD_AT(spec,14,EMSPTR) + +#define EMSPAGESIZE 16384L /* gospel, see the EMS specs */ + +#define HIBYTE(W) (((W) >> 8) & 0xFF) +#define LOBYTE(W) ((W) & 0xFF) + + +METHODDEF(void) +read_ems_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + EMScontext ctx; + EMSspec spec; + + spec.length = byte_count; + SRC_TYPE(spec) = 1; + SRC_HANDLE(spec) = info->handle.ems_handle; + SRC_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); + SRC_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); + DST_TYPE(spec) = 0; + DST_HANDLE(spec) = 0; + DST_PTR(spec) = buffer_address; + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x5700; /* move memory region */ + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + ERREXIT(cinfo, JERR_EMS_READ); +} + + +METHODDEF(void) +write_ems_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + EMScontext ctx; + EMSspec spec; + + spec.length = byte_count; + SRC_TYPE(spec) = 0; + SRC_HANDLE(spec) = 0; + SRC_PTR(spec) = buffer_address; + DST_TYPE(spec) = 1; + DST_HANDLE(spec) = info->handle.ems_handle; + DST_PAGE(spec) = (unsigned short) (file_offset / EMSPAGESIZE); + DST_OFFSET(spec) = (unsigned short) (file_offset % EMSPAGESIZE); + + ctx.ds_si = (void far *) & spec; + ctx.ax = 0x5700; /* move memory region */ + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + ERREXIT(cinfo, JERR_EMS_WRITE); +} + + +METHODDEF(void) +close_ems_store (j_common_ptr cinfo, backing_store_ptr info) +{ + EMScontext ctx; + + ctx.ax = 0x4500; + ctx.dx = info->handle.ems_handle; + jems_calldriver((EMScontext far *) & ctx); + TRACEMS1(cinfo, 1, JTRC_EMS_CLOSE, info->handle.ems_handle); + /* we ignore any error return from the driver */ +} + + +LOCAL(boolean) +open_ems_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + EMScontext ctx; + + /* Is EMS driver there? */ + if (! jems_available()) + return FALSE; + + /* Get status, make sure EMS is OK */ + ctx.ax = 0x4000; + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + return FALSE; + + /* Get version, must be >= 4.0 */ + ctx.ax = 0x4600; + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0 || LOBYTE(ctx.ax) < 0x40) + return FALSE; + + /* Try to allocate requested space */ + ctx.ax = 0x4300; + ctx.bx = (unsigned short) ((total_bytes_needed + EMSPAGESIZE-1L) / EMSPAGESIZE); + jems_calldriver((EMScontext far *) & ctx); + if (HIBYTE(ctx.ax) != 0) + return FALSE; + + /* Succeeded, save the handle and away we go */ + info->handle.ems_handle = ctx.dx; + info->read_backing_store = read_ems_store; + info->write_backing_store = write_ems_store; + info->close_backing_store = close_ems_store; + TRACEMS1(cinfo, 1, JTRC_EMS_OPEN, ctx.dx); + return TRUE; /* succeeded */ +} + +#endif /* EMS_SUPPORTED */ + + +/* + * Initial opening of a backing-store object. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + /* Try extended memory, then expanded memory, then regular file. */ +#if XMS_SUPPORTED + if (open_xms_store(cinfo, info, total_bytes_needed)) + return; +#endif +#if EMS_SUPPORTED + if (open_ems_store(cinfo, info, total_bytes_needed)) + return; +#endif + if (open_file_store(cinfo, info, total_bytes_needed)) + return; + ERREXITS(cinfo, JERR_TFILE_CREATE, ""); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; /* initialize temp file name generator */ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* Microsoft C, at least in v6.00A, will not successfully reclaim freed + * blocks of size > 32Kbytes unless we give it a kick in the rear, like so: + */ +#ifdef NEED_FHEAPMIN + _fheapmin(); +#endif +} diff --git a/src/3rdparty/libjpeg/jmemdosa.asm b/src/3rdparty/libjpeg/jmemdosa.asm new file mode 100644 index 0000000..ecd4372 --- /dev/null +++ b/src/3rdparty/libjpeg/jmemdosa.asm @@ -0,0 +1,379 @@ +; +; jmemdosa.asm +; +; Copyright (C) 1992, Thomas G. Lane. +; This file is part of the Independent JPEG Group's software. +; For conditions of distribution and use, see the accompanying README file. +; +; This file contains low-level interface routines to support the MS-DOS +; backing store manager (jmemdos.c). Routines are provided to access disk +; files through direct DOS calls, and to access XMS and EMS drivers. +; +; This file should assemble with Microsoft's MASM or any compatible +; assembler (including Borland's Turbo Assembler). If you haven't got +; a compatible assembler, better fall back to jmemansi.c or jmemname.c. +; +; To minimize dependence on the C compiler's register usage conventions, +; we save and restore all 8086 registers, even though most compilers only +; require SI,DI,DS to be preserved. Also, we use only 16-bit-wide return +; values, which everybody returns in AX. +; +; Based on code contributed by Ge' Weijers. +; + +JMEMDOSA_TXT segment byte public 'CODE' + + assume cs:JMEMDOSA_TXT + + public _jdos_open + public _jdos_close + public _jdos_seek + public _jdos_read + public _jdos_write + public _jxms_getdriver + public _jxms_calldriver + public _jems_available + public _jems_calldriver + +; +; short far jdos_open (short far * handle, char far * filename) +; +; Create and open a temporary file +; +_jdos_open proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov cx,0 ; normal file attributes + lds dx,dword ptr [bp+10] ; get filename pointer + mov ah,3ch ; create file + int 21h + jc open_err ; if failed, return error code + lds bx,dword ptr [bp+6] ; get handle pointer + mov word ptr [bx],ax ; save the handle + xor ax,ax ; return zero for OK +open_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_open endp + + +; +; short far jdos_close (short handle) +; +; Close the file handle +; +_jdos_close proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov ah,3eh ; close file + int 21h + jc close_err ; if failed, return error code + xor ax,ax ; return zero for OK +close_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_close endp + + +; +; short far jdos_seek (short handle, long offset) +; +; Set file position +; +_jdos_seek proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + mov dx,word ptr [bp+8] ; LS offset + mov cx,word ptr [bp+10] ; MS offset + mov ax,4200h ; absolute seek + int 21h + jc seek_err ; if failed, return error code + xor ax,ax ; return zero for OK +seek_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_seek endp + + +; +; short far jdos_read (short handle, void far * buffer, unsigned short count) +; +; Read from file +; +_jdos_read proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,3fh ; read file + int 21h + jc read_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes were read + je read_ok + mov ax,1 ; else return 1 for not OK + jmp short read_err +read_ok: xor ax,ax ; return zero for OK +read_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_read endp + + +; +; short far jdos_write (short handle, void far * buffer, unsigned short count) +; +; Write to file +; +_jdos_write proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov bx,word ptr [bp+6] ; file handle + lds dx,dword ptr [bp+8] ; buffer address + mov cx,word ptr [bp+12] ; number of bytes + mov ah,40h ; write file + int 21h + jc write_err ; if failed, return error code + cmp ax,word ptr [bp+12] ; make sure all bytes written + je write_ok + mov ax,1 ; else return 1 for not OK + jmp short write_err +write_ok: xor ax,ax ; return zero for OK +write_err: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jdos_write endp + + +; +; void far jxms_getdriver (XMSDRIVER far *) +; +; Get the address of the XMS driver, or NULL if not available +; +_jxms_getdriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,4300h ; call multiplex interrupt with + int 2fh ; a magic cookie, hex 4300 + cmp al,80h ; AL should contain hex 80 + je xmsavail + xor dx,dx ; no XMS driver available + xor ax,ax ; return a nil pointer + jmp short xmsavail_done +xmsavail: mov ax,4310h ; fetch driver address with + int 2fh ; another magic cookie + mov dx,es ; copy address to dx:ax + mov ax,bx +xmsavail_done: les bx,dword ptr [bp+6] ; get pointer to return value + mov word ptr es:[bx],ax + mov word ptr es:[bx+2],dx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_getdriver endp + + +; +; void far jxms_calldriver (XMSDRIVER, XMScontext far *) +; +; The XMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the XMS call is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jxms_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + call dword ptr [bp+6] ; call the driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+10] ; get XMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jxms_calldriver endp + + +; +; short far jems_available (void) +; +; Have we got an EMS driver? (this comes straight from the EMS 4.0 specs) +; +_jems_available proc far + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + mov ax,3567h ; get interrupt vector 67h + int 21h + push cs + pop ds + mov di,000ah ; check offs 10 in returned seg + lea si,ASCII_device_name ; against literal string + mov cx,8 + cld + repe cmpsb + jne no_ems + mov ax,1 ; match, it's there + jmp short avail_done +no_ems: xor ax,ax ; it's not there +avail_done: pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + ret + +ASCII_device_name db "EMMXXXX0" + +_jems_available endp + + +; +; void far jems_calldriver (EMScontext far *) +; +; The EMScontext structure contains values for the AX,DX,BX,SI,DS registers. +; These are loaded, the EMS trap is performed, and the new values of the +; AX,DX,BX registers are written back to the context structure. +; +_jems_calldriver proc far + push bp ; linkage + mov bp,sp + push si ; save all registers for safety + push di + push bx + push cx + push dx + push es + push ds + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov ax,word ptr es:[bx] ; load registers + mov dx,word ptr es:[bx+2] + mov si,word ptr es:[bx+6] + mov ds,word ptr es:[bx+8] + mov bx,word ptr es:[bx+4] + int 67h ; call the EMS driver + mov cx,bx ; save returned BX for a sec + les bx,dword ptr [bp+6] ; get EMScontext pointer + mov word ptr es:[bx],ax ; put back ax,dx,bx + mov word ptr es:[bx+2],dx + mov word ptr es:[bx+4],cx + pop ds ; restore registers and exit + pop es + pop dx + pop cx + pop bx + pop di + pop si + pop bp + ret +_jems_calldriver endp + +JMEMDOSA_TXT ends + + end diff --git a/src/3rdparty/libjpeg/jmemmac.c b/src/3rdparty/libjpeg/jmemmac.c new file mode 100644 index 0000000..106f9be --- /dev/null +++ b/src/3rdparty/libjpeg/jmemmac.c @@ -0,0 +1,289 @@ +/* + * jmemmac.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * jmemmac.c provides an Apple Macintosh implementation of the system- + * dependent portion of the JPEG memory manager. + * + * If you use jmemmac.c, then you must define USE_MAC_MEMMGR in the + * JPEG_INTERNALS part of jconfig.h. + * + * jmemmac.c uses the Macintosh toolbox routines NewPtr and DisposePtr + * instead of malloc and free. It accurately determines the amount of + * memory available by using CompactMem. Notice that if left to its + * own devices, this code can chew up all available space in the + * application's zone, with the exception of the rather small "slop" + * factor computed in jpeg_mem_available(). The application can ensure + * that more space is left over by reducing max_memory_to_use. + * + * Large images are swapped to disk using temporary files and System 7.0+'s + * temporary folder functionality. + * + * Note that jmemmac.c depends on two features of MacOS that were first + * introduced in System 7: FindFolder and the FSSpec-based calls. + * If your application uses jmemmac.c and is run under System 6 or earlier, + * and the jpeg library decides it needs a temporary file, it will abort, + * printing error messages about requiring System 7. (If no temporary files + * are created, it will run fine.) + * + * If you want to use jmemmac.c in an application that might be used with + * System 6 or earlier, then you should remove dependencies on FindFolder + * and the FSSpec calls. You will need to replace FindFolder with some + * other mechanism for finding a place to put temporary files, and you + * should replace the FSSpec calls with their HFS equivalents: + * + * FSpDelete -> HDelete + * FSpGetFInfo -> HGetFInfo + * FSpCreate -> HCreate + * FSpOpenDF -> HOpen *** Note: not HOpenDF *** + * FSMakeFSSpec -> (fill in spec by hand.) + * + * (Use HOpen instead of HOpenDF. HOpen is just a glue-interface to PBHOpen, + * which is on all HFS macs. HOpenDF is a System 7 addition which avoids the + * ages-old problem of names starting with a period.) + * + * Contributed by Sam Bushell (jsam@iagu.on.net) and + * Dan Gildor (gyld@in-touch.com). + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef USE_MAC_MEMMGR /* make sure user got configuration right */ + You forgot to define USE_MAC_MEMMGR in jconfig.h. /* deliberate syntax error */ +#endif + +#include /* we use the MacOS memory manager */ +#include /* we use the MacOS File stuff */ +#include /* we use the MacOS HFS stuff */ +#include /* for smSystemScript */ +#include /* we use Gestalt to test for specific functionality */ + +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "JPG%03d.TMP" +#endif + +static int next_file_num; /* to distinguish among several temp files */ + + +/* + * Memory allocation and freeing are controlled by the MacOS library + * routines NewPtr() and DisposePtr(), which allocate fixed-address + * storage. Unfortunately, the IJG library isn't smart enough to cope + * with relocatable storage. + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) NewPtr(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + DisposePtr((Ptr) object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: we include FAR keywords in the routine declarations simply for + * consistency with the rest of the IJG code; FAR should expand to empty + * on rational architectures like the Mac. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) NewPtr(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + DisposePtr((Ptr) object); +} + + +/* + * This routine computes the total memory space available for allocation. + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + long limit = cinfo->mem->max_memory_to_use - already_allocated; + long slop, mem; + + /* Don't ask for more than what application has told us we may use */ + if (max_bytes_needed > limit && limit > 0) + max_bytes_needed = limit; + /* Find whether there's a big enough free block in the heap. + * CompactMem tries to create a contiguous block of the requested size, + * and then returns the size of the largest free block (which could be + * much more or much less than we asked for). + * We add some slop to ensure we don't use up all available memory. + */ + slop = max_bytes_needed / 16 + 32768L; + mem = CompactMem(max_bytes_needed + slop) - slop; + if (mem < 0) + mem = 0; /* sigh, couldn't even get the slop */ + /* Don't take more than the application says we can have */ + if (mem > limit && limit > 0) + mem = limit; + return mem; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + long bytes = byte_count; + long retVal; + + if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) + ERREXIT(cinfo, JERR_TFILE_SEEK); + + retVal = FSRead ( info->temp_file, &bytes, + (unsigned char *) buffer_address ); + if ( retVal != noErr || bytes != byte_count ) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + long bytes = byte_count; + long retVal; + + if ( SetFPos ( info->temp_file, fsFromStart, file_offset ) != noErr ) + ERREXIT(cinfo, JERR_TFILE_SEEK); + + retVal = FSWrite ( info->temp_file, &bytes, + (unsigned char *) buffer_address ); + if ( retVal != noErr || bytes != byte_count ) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + FSClose ( info->temp_file ); + FSpDelete ( &(info->tempSpec) ); +} + + +/* + * Initial opening of a backing-store object. + * + * This version uses FindFolder to find the Temporary Items folder, + * and puts the temporary file in there. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + short tmpRef, vRefNum; + long dirID; + FInfo finderInfo; + FSSpec theSpec; + Str255 fName; + OSErr osErr; + long gestaltResponse = 0; + + /* Check that FSSpec calls are available. */ + osErr = Gestalt( gestaltFSAttr, &gestaltResponse ); + if ( ( osErr != noErr ) + || !( gestaltResponse & (1<temp_name, TEMP_FILE_NAME, next_file_num); + strcpy ( (Ptr)fName+1, info->temp_name ); + *fName = strlen (info->temp_name); + osErr = FSMakeFSSpec ( vRefNum, dirID, fName, &theSpec ); + + if ( (osErr = FSpGetFInfo ( &theSpec, &finderInfo ) ) != noErr ) + break; + } + + osErr = FSpCreate ( &theSpec, '????', '????', smSystemScript ); + if ( osErr != noErr ) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + + osErr = FSpOpenDF ( &theSpec, fsRdWrPerm, &(info->temp_file) ); + if ( osErr != noErr ) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + + info->tempSpec = theSpec; + + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; + + /* max_memory_to_use will be initialized to FreeMem()'s result; + * the calling application might later reduce it, for example + * to leave room to invoke multiple JPEG objects. + * Note that FreeMem returns the total number of free bytes; + * it may not be possible to allocate a single block of this size. + */ + return FreeMem(); +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/3rdparty/libjpeg/jmemmgr.c b/src/3rdparty/libjpeg/jmemmgr.c new file mode 100644 index 0000000..d801b32 --- /dev/null +++ b/src/3rdparty/libjpeg/jmemmgr.c @@ -0,0 +1,1118 @@ +/* + * jmemmgr.c + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains the JPEG system-independent memory management + * routines. This code is usable across a wide variety of machines; most + * of the system dependencies have been isolated in a separate file. + * The major functions provided here are: + * * pool-based allocation and freeing of memory; + * * policy decisions about how to divide available memory among the + * virtual arrays; + * * control logic for swapping virtual arrays between main memory and + * backing storage. + * The separate system-dependent file provides the actual backing-storage + * access code, and it contains the policy decision about how much total + * main memory to use. + * This file is system-dependent in the sense that some of its functions + * are unnecessary in some systems. For example, if there is enough virtual + * memory so that backing storage will never be used, much of the virtual + * array control logic could be removed. (Of course, if you have that much + * memory then you shouldn't care about a little bit of unused code...) + */ + +#define JPEG_INTERNALS +#define AM_MEMORY_MANAGER /* we define jvirt_Xarray_control structs */ +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef NO_GETENV +#ifndef HAVE_STDLIB_H /* should declare getenv() */ +extern char * getenv JPP((const char * name)); +#endif +#endif + + +/* + * Some important notes: + * The allocation routines provided here must never return NULL. + * They should exit to error_exit if unsuccessful. + * + * It's not a good idea to try to merge the sarray and barray routines, + * even though they are textually almost the same, because samples are + * usually stored as bytes while coefficients are shorts or ints. Thus, + * in machines where byte pointers have a different representation from + * word pointers, the resulting machine code could not be the same. + */ + + +/* + * Many machines require storage alignment: longs must start on 4-byte + * boundaries, doubles on 8-byte boundaries, etc. On such machines, malloc() + * always returns pointers that are multiples of the worst-case alignment + * requirement, and we had better do so too. + * There isn't any really portable way to determine the worst-case alignment + * requirement. This module assumes that the alignment requirement is + * multiples of sizeof(ALIGN_TYPE). + * By default, we define ALIGN_TYPE as double. This is necessary on some + * workstations (where doubles really do need 8-byte alignment) and will work + * fine on nearly everything. If your machine has lesser alignment needs, + * you can save a few bytes by making ALIGN_TYPE smaller. + * The only place I know of where this will NOT work is certain Macintosh + * 680x0 compilers that define double as a 10-byte IEEE extended float. + * Doing 10-byte alignment is counterproductive because longwords won't be + * aligned well. Put "#define ALIGN_TYPE long" in jconfig.h if you have + * such a compiler. + */ + +#ifndef ALIGN_TYPE /* so can override from jconfig.h */ +#define ALIGN_TYPE double +#endif + + +/* + * We allocate objects from "pools", where each pool is gotten with a single + * request to jpeg_get_small() or jpeg_get_large(). There is no per-object + * overhead within a pool, except for alignment padding. Each pool has a + * header with a link to the next pool of the same class. + * Small and large pool headers are identical except that the latter's + * link pointer must be FAR on 80x86 machines. + * Notice that the "real" header fields are union'ed with a dummy ALIGN_TYPE + * field. This forces the compiler to make SIZEOF(small_pool_hdr) a multiple + * of the alignment requirement of ALIGN_TYPE. + */ + +typedef union small_pool_struct * small_pool_ptr; + +typedef union small_pool_struct { + struct { + small_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} small_pool_hdr; + +typedef union large_pool_struct FAR * large_pool_ptr; + +typedef union large_pool_struct { + struct { + large_pool_ptr next; /* next in list of pools */ + size_t bytes_used; /* how many bytes already used within pool */ + size_t bytes_left; /* bytes still available in this pool */ + } hdr; + ALIGN_TYPE dummy; /* included in union to ensure alignment */ +} large_pool_hdr; + + +/* + * Here is the full definition of a memory manager object. + */ + +typedef struct { + struct jpeg_memory_mgr pub; /* public fields */ + + /* Each pool identifier (lifetime class) names a linked list of pools. */ + small_pool_ptr small_list[JPOOL_NUMPOOLS]; + large_pool_ptr large_list[JPOOL_NUMPOOLS]; + + /* Since we only have one lifetime class of virtual arrays, only one + * linked list is necessary (for each datatype). Note that the virtual + * array control blocks being linked together are actually stored somewhere + * in the small-pool list. + */ + jvirt_sarray_ptr virt_sarray_list; + jvirt_barray_ptr virt_barray_list; + + /* This counts total space obtained from jpeg_get_small/large */ + long total_space_allocated; + + /* alloc_sarray and alloc_barray set this value for use by virtual + * array routines. + */ + JDIMENSION last_rowsperchunk; /* from most recent alloc_sarray/barray */ +} my_memory_mgr; + +typedef my_memory_mgr * my_mem_ptr; + + +/* + * The control blocks for virtual arrays. + * Note that these blocks are allocated in the "small" pool area. + * System-dependent info for the associated backing store (if any) is hidden + * inside the backing_store_info struct. + */ + +struct jvirt_sarray_control { + JSAMPARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION samplesperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_sarray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_sarray_ptr next; /* link to next virtual sarray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + +struct jvirt_barray_control { + JBLOCKARRAY mem_buffer; /* => the in-memory buffer */ + JDIMENSION rows_in_array; /* total virtual array height */ + JDIMENSION blocksperrow; /* width of array (and of memory buffer) */ + JDIMENSION maxaccess; /* max rows accessed by access_virt_barray */ + JDIMENSION rows_in_mem; /* height of memory buffer */ + JDIMENSION rowsperchunk; /* allocation chunk size in mem_buffer */ + JDIMENSION cur_start_row; /* first logical row # in the buffer */ + JDIMENSION first_undef_row; /* row # of first uninitialized row */ + boolean pre_zero; /* pre-zero mode requested? */ + boolean dirty; /* do current buffer contents need written? */ + boolean b_s_open; /* is backing-store data valid? */ + jvirt_barray_ptr next; /* link to next virtual barray control block */ + backing_store_info b_s_info; /* System-dependent control info */ +}; + + +#ifdef MEM_STATS /* optional extra stuff for statistics */ + +LOCAL(void) +print_mem_stats (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + + /* Since this is only a debugging stub, we can cheat a little by using + * fprintf directly rather than going through the trace message code. + * This is helpful because message parm array can't handle longs. + */ + fprintf(stderr, "Freeing pool %d, total space = %ld\n", + pool_id, mem->total_space_allocated); + + for (lhdr_ptr = mem->large_list[pool_id]; lhdr_ptr != NULL; + lhdr_ptr = lhdr_ptr->hdr.next) { + fprintf(stderr, " Large chunk used %ld\n", + (long) lhdr_ptr->hdr.bytes_used); + } + + for (shdr_ptr = mem->small_list[pool_id]; shdr_ptr != NULL; + shdr_ptr = shdr_ptr->hdr.next) { + fprintf(stderr, " Small chunk used %ld free %ld\n", + (long) shdr_ptr->hdr.bytes_used, + (long) shdr_ptr->hdr.bytes_left); + } +} + +#endif /* MEM_STATS */ + + +LOCAL(void) +out_of_memory (j_common_ptr cinfo, int which) +/* Report an out-of-memory error and stop execution */ +/* If we compiled MEM_STATS support, report alloc requests before dying */ +{ +#ifdef MEM_STATS + cinfo->err->trace_level = 2; /* force self_destruct to report stats */ +#endif + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, which); +} + + +/* + * Allocation of "small" objects. + * + * For these, we use pooled storage. When a new pool must be created, + * we try to get enough space for the current request plus a "slop" factor, + * where the slop will be the amount of leftover space in the new pool. + * The speed vs. space tradeoff is largely determined by the slop values. + * A different slop value is provided for each pool class (lifetime), + * and we also distinguish the first pool of a class from later ones. + * NOTE: the values given work fairly well on both 16- and 32-bit-int + * machines, but may be too small if longs are 64 bits or more. + */ + +static const size_t first_pool_slop[JPOOL_NUMPOOLS] = +{ + 1600, /* first PERMANENT pool */ + 16000 /* first IMAGE pool */ +}; + +static const size_t extra_pool_slop[JPOOL_NUMPOOLS] = +{ + 0, /* additional PERMANENT pools */ + 5000 /* additional IMAGE pools */ +}; + +#define MIN_SLOP 50 /* greater than 0 to avoid futile looping */ + + +METHODDEF(void *) +alloc_small (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "small" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr hdr_ptr, prev_hdr_ptr; + char * data_ptr; + size_t odd_bytes, min_request, slop; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(small_pool_hdr))) + out_of_memory(cinfo, 1); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* See if space is available in any existing pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + prev_hdr_ptr = NULL; + hdr_ptr = mem->small_list[pool_id]; + while (hdr_ptr != NULL) { + if (hdr_ptr->hdr.bytes_left >= sizeofobject) + break; /* found pool with enough space */ + prev_hdr_ptr = hdr_ptr; + hdr_ptr = hdr_ptr->hdr.next; + } + + /* Time to make a new pool? */ + if (hdr_ptr == NULL) { + /* min_request is what we need now, slop is what will be leftover */ + min_request = sizeofobject + SIZEOF(small_pool_hdr); + if (prev_hdr_ptr == NULL) /* first pool in class? */ + slop = first_pool_slop[pool_id]; + else + slop = extra_pool_slop[pool_id]; + /* Don't ask for more than MAX_ALLOC_CHUNK */ + if (slop > (size_t) (MAX_ALLOC_CHUNK-min_request)) + slop = (size_t) (MAX_ALLOC_CHUNK-min_request); + /* Try to get space, if fail reduce slop and try again */ + for (;;) { + hdr_ptr = (small_pool_ptr) jpeg_get_small(cinfo, min_request + slop); + if (hdr_ptr != NULL) + break; + slop /= 2; + if (slop < MIN_SLOP) /* give up when it gets real small */ + out_of_memory(cinfo, 2); /* jpeg_get_small failed */ + } + mem->total_space_allocated += min_request + slop; + /* Success, initialize the new pool header and add to end of list */ + hdr_ptr->hdr.next = NULL; + hdr_ptr->hdr.bytes_used = 0; + hdr_ptr->hdr.bytes_left = sizeofobject + slop; + if (prev_hdr_ptr == NULL) /* first pool in class? */ + mem->small_list[pool_id] = hdr_ptr; + else + prev_hdr_ptr->hdr.next = hdr_ptr; + } + + /* OK, allocate the object from the current pool */ + data_ptr = (char *) (hdr_ptr + 1); /* point to first data byte in pool */ + data_ptr += hdr_ptr->hdr.bytes_used; /* point to place for object */ + hdr_ptr->hdr.bytes_used += sizeofobject; + hdr_ptr->hdr.bytes_left -= sizeofobject; + + return (void *) data_ptr; +} + + +/* + * Allocation of "large" objects. + * + * The external semantics of these are the same as "small" objects, + * except that FAR pointers are used on 80x86. However the pool + * management heuristics are quite different. We assume that each + * request is large enough that it may as well be passed directly to + * jpeg_get_large; the pool management just links everything together + * so that we can free it all on demand. + * Note: the major use of "large" objects is in JSAMPARRAY and JBLOCKARRAY + * structures. The routines that create these structures (see below) + * deliberately bunch rows together to ensure a large request size. + */ + +METHODDEF(void FAR *) +alloc_large (j_common_ptr cinfo, int pool_id, size_t sizeofobject) +/* Allocate a "large" object */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + large_pool_ptr hdr_ptr; + size_t odd_bytes; + + /* Check for unsatisfiable request (do now to ensure no overflow below) */ + if (sizeofobject > (size_t) (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr))) + out_of_memory(cinfo, 3); /* request exceeds malloc's ability */ + + /* Round up the requested size to a multiple of SIZEOF(ALIGN_TYPE) */ + odd_bytes = sizeofobject % SIZEOF(ALIGN_TYPE); + if (odd_bytes > 0) + sizeofobject += SIZEOF(ALIGN_TYPE) - odd_bytes; + + /* Always make a new pool */ + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + hdr_ptr = (large_pool_ptr) jpeg_get_large(cinfo, sizeofobject + + SIZEOF(large_pool_hdr)); + if (hdr_ptr == NULL) + out_of_memory(cinfo, 4); /* jpeg_get_large failed */ + mem->total_space_allocated += sizeofobject + SIZEOF(large_pool_hdr); + + /* Success, initialize the new pool header and add to list */ + hdr_ptr->hdr.next = mem->large_list[pool_id]; + /* We maintain space counts in each pool header for statistical purposes, + * even though they are not needed for allocation. + */ + hdr_ptr->hdr.bytes_used = sizeofobject; + hdr_ptr->hdr.bytes_left = 0; + mem->large_list[pool_id] = hdr_ptr; + + return (void FAR *) (hdr_ptr + 1); /* point to first data byte in pool */ +} + + +/* + * Creation of 2-D sample arrays. + * The pointers are in near heap, the samples themselves in FAR heap. + * + * To minimize allocation overhead and to allow I/O of large contiguous + * blocks, we allocate the sample rows in groups of as many rows as possible + * without exceeding MAX_ALLOC_CHUNK total bytes per allocation request. + * NB: the virtual array control routines, later in this file, know about + * this chunking of rows. The rowsperchunk value is left in the mem manager + * object so that it can be saved away if this sarray is the workspace for + * a virtual array. + */ + +METHODDEF(JSAMPARRAY) +alloc_sarray (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, JDIMENSION numrows) +/* Allocate a 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JSAMPARRAY result; + JSAMPROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) samplesperrow * SIZEOF(JSAMPLE)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JSAMPARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JSAMPROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JSAMPROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) samplesperrow + * SIZEOF(JSAMPLE))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += samplesperrow; + } + } + + return result; +} + + +/* + * Creation of 2-D coefficient-block arrays. + * This is essentially the same as the code for sample arrays, above. + */ + +METHODDEF(JBLOCKARRAY) +alloc_barray (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, JDIMENSION numrows) +/* Allocate a 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + JBLOCKARRAY result; + JBLOCKROW workspace; + JDIMENSION rowsperchunk, currow, i; + long ltemp; + + /* Calculate max # of rows allowed in one allocation chunk */ + ltemp = (MAX_ALLOC_CHUNK-SIZEOF(large_pool_hdr)) / + ((long) blocksperrow * SIZEOF(JBLOCK)); + if (ltemp <= 0) + ERREXIT(cinfo, JERR_WIDTH_OVERFLOW); + if (ltemp < (long) numrows) + rowsperchunk = (JDIMENSION) ltemp; + else + rowsperchunk = numrows; + mem->last_rowsperchunk = rowsperchunk; + + /* Get space for row pointers (small object) */ + result = (JBLOCKARRAY) alloc_small(cinfo, pool_id, + (size_t) (numrows * SIZEOF(JBLOCKROW))); + + /* Get the rows themselves (large objects) */ + currow = 0; + while (currow < numrows) { + rowsperchunk = MIN(rowsperchunk, numrows - currow); + workspace = (JBLOCKROW) alloc_large(cinfo, pool_id, + (size_t) ((size_t) rowsperchunk * (size_t) blocksperrow + * SIZEOF(JBLOCK))); + for (i = rowsperchunk; i > 0; i--) { + result[currow++] = workspace; + workspace += blocksperrow; + } + } + + return result; +} + + +/* + * About virtual array management: + * + * The above "normal" array routines are only used to allocate strip buffers + * (as wide as the image, but just a few rows high). Full-image-sized buffers + * are handled as "virtual" arrays. The array is still accessed a strip at a + * time, but the memory manager must save the whole array for repeated + * accesses. The intended implementation is that there is a strip buffer in + * memory (as high as is possible given the desired memory limit), plus a + * backing file that holds the rest of the array. + * + * The request_virt_array routines are told the total size of the image and + * the maximum number of rows that will be accessed at once. The in-memory + * buffer must be at least as large as the maxaccess value. + * + * The request routines create control blocks but not the in-memory buffers. + * That is postponed until realize_virt_arrays is called. At that time the + * total amount of space needed is known (approximately, anyway), so free + * memory can be divided up fairly. + * + * The access_virt_array routines are responsible for making a specific strip + * area accessible (after reading or writing the backing file, if necessary). + * Note that the access routines are told whether the caller intends to modify + * the accessed strip; during a read-only pass this saves having to rewrite + * data to disk. The access routines are also responsible for pre-zeroing + * any newly accessed rows, if pre-zeroing was requested. + * + * In current usage, the access requests are usually for nonoverlapping + * strips; that is, successive access start_row numbers differ by exactly + * num_rows = maxaccess. This means we can get good performance with simple + * buffer dump/reload logic, by making the in-memory buffer be a multiple + * of the access height; then there will never be accesses across bufferload + * boundaries. The code will still work with overlapping access requests, + * but it doesn't handle bufferload overlaps very efficiently. + */ + + +METHODDEF(jvirt_sarray_ptr) +request_virt_sarray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION samplesperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D sample array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_sarray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_sarray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_sarray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->samplesperrow = samplesperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_sarray_list; /* add to list of virtual arrays */ + mem->virt_sarray_list = result; + + return result; +} + + +METHODDEF(jvirt_barray_ptr) +request_virt_barray (j_common_ptr cinfo, int pool_id, boolean pre_zero, + JDIMENSION blocksperrow, JDIMENSION numrows, + JDIMENSION maxaccess) +/* Request a virtual 2-D coefficient-block array */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + jvirt_barray_ptr result; + + /* Only IMAGE-lifetime virtual arrays are currently supported */ + if (pool_id != JPOOL_IMAGE) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + + /* get control block */ + result = (jvirt_barray_ptr) alloc_small(cinfo, pool_id, + SIZEOF(struct jvirt_barray_control)); + + result->mem_buffer = NULL; /* marks array not yet realized */ + result->rows_in_array = numrows; + result->blocksperrow = blocksperrow; + result->maxaccess = maxaccess; + result->pre_zero = pre_zero; + result->b_s_open = FALSE; /* no associated backing-store object */ + result->next = mem->virt_barray_list; /* add to list of virtual arrays */ + mem->virt_barray_list = result; + + return result; +} + + +METHODDEF(void) +realize_virt_arrays (j_common_ptr cinfo) +/* Allocate the in-memory buffers for any unrealized virtual arrays */ +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + long space_per_minheight, maximum_space, avail_mem; + long minheights, max_minheights; + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + /* Compute the minimum space needed (maxaccess rows in each buffer) + * and the maximum space needed (full image height in each buffer). + * These may be of use to the system-dependent jpeg_mem_available routine. + */ + space_per_minheight = 0; + maximum_space = 0; + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) sptr->maxaccess * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + maximum_space += (long) sptr->rows_in_array * + (long) sptr->samplesperrow * SIZEOF(JSAMPLE); + } + } + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + space_per_minheight += (long) bptr->maxaccess * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + maximum_space += (long) bptr->rows_in_array * + (long) bptr->blocksperrow * SIZEOF(JBLOCK); + } + } + + if (space_per_minheight <= 0) + return; /* no unrealized arrays, no work */ + + /* Determine amount of memory to actually use; this is system-dependent. */ + avail_mem = jpeg_mem_available(cinfo, space_per_minheight, maximum_space, + mem->total_space_allocated); + + /* If the maximum space needed is available, make all the buffers full + * height; otherwise parcel it out with the same number of minheights + * in each buffer. + */ + if (avail_mem >= maximum_space) + max_minheights = 1000000000L; + else { + max_minheights = avail_mem / space_per_minheight; + /* If there doesn't seem to be enough space, try to get the minimum + * anyway. This allows a "stub" implementation of jpeg_mem_available(). + */ + if (max_minheights <= 0) + max_minheights = 1; + } + + /* Allocate the in-memory buffers and initialize backing store as needed. */ + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) sptr->rows_in_array - 1L) / sptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + sptr->rows_in_mem = sptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + sptr->rows_in_mem = (JDIMENSION) (max_minheights * sptr->maxaccess); + jpeg_open_backing_store(cinfo, & sptr->b_s_info, + (long) sptr->rows_in_array * + (long) sptr->samplesperrow * + (long) SIZEOF(JSAMPLE)); + sptr->b_s_open = TRUE; + } + sptr->mem_buffer = alloc_sarray(cinfo, JPOOL_IMAGE, + sptr->samplesperrow, sptr->rows_in_mem); + sptr->rowsperchunk = mem->last_rowsperchunk; + sptr->cur_start_row = 0; + sptr->first_undef_row = 0; + sptr->dirty = FALSE; + } + } + + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->mem_buffer == NULL) { /* if not realized yet */ + minheights = ((long) bptr->rows_in_array - 1L) / bptr->maxaccess + 1L; + if (minheights <= max_minheights) { + /* This buffer fits in memory */ + bptr->rows_in_mem = bptr->rows_in_array; + } else { + /* It doesn't fit in memory, create backing store. */ + bptr->rows_in_mem = (JDIMENSION) (max_minheights * bptr->maxaccess); + jpeg_open_backing_store(cinfo, & bptr->b_s_info, + (long) bptr->rows_in_array * + (long) bptr->blocksperrow * + (long) SIZEOF(JBLOCK)); + bptr->b_s_open = TRUE; + } + bptr->mem_buffer = alloc_barray(cinfo, JPOOL_IMAGE, + bptr->blocksperrow, bptr->rows_in_mem); + bptr->rowsperchunk = mem->last_rowsperchunk; + bptr->cur_start_row = 0; + bptr->first_undef_row = 0; + bptr->dirty = FALSE; + } + } +} + + +LOCAL(void) +do_sarray_io (j_common_ptr cinfo, jvirt_sarray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual sample array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->samplesperrow * SIZEOF(JSAMPLE); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +LOCAL(void) +do_barray_io (j_common_ptr cinfo, jvirt_barray_ptr ptr, boolean writing) +/* Do backing store read or write of a virtual coefficient-block array */ +{ + long bytesperrow, file_offset, byte_count, rows, thisrow, i; + + bytesperrow = (long) ptr->blocksperrow * SIZEOF(JBLOCK); + file_offset = ptr->cur_start_row * bytesperrow; + /* Loop to read or write each allocation chunk in mem_buffer */ + for (i = 0; i < (long) ptr->rows_in_mem; i += ptr->rowsperchunk) { + /* One chunk, but check for short chunk at end of buffer */ + rows = MIN((long) ptr->rowsperchunk, (long) ptr->rows_in_mem - i); + /* Transfer no more than is currently defined */ + thisrow = (long) ptr->cur_start_row + i; + rows = MIN(rows, (long) ptr->first_undef_row - thisrow); + /* Transfer no more than fits in file */ + rows = MIN(rows, (long) ptr->rows_in_array - thisrow); + if (rows <= 0) /* this chunk might be past end of file! */ + break; + byte_count = rows * bytesperrow; + if (writing) + (*ptr->b_s_info.write_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + else + (*ptr->b_s_info.read_backing_store) (cinfo, & ptr->b_s_info, + (void FAR *) ptr->mem_buffer[i], + file_offset, byte_count); + file_offset += byte_count; + } +} + + +METHODDEF(JSAMPARRAY) +access_virt_sarray (j_common_ptr cinfo, jvirt_sarray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual sample array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_sarray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_sarray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->samplesperrow * SIZEOF(JSAMPLE); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +METHODDEF(JBLOCKARRAY) +access_virt_barray (j_common_ptr cinfo, jvirt_barray_ptr ptr, + JDIMENSION start_row, JDIMENSION num_rows, + boolean writable) +/* Access the part of a virtual block array starting at start_row */ +/* and extending for num_rows rows. writable is true if */ +/* caller intends to modify the accessed area. */ +{ + JDIMENSION end_row = start_row + num_rows; + JDIMENSION undef_row; + + /* debugging check */ + if (end_row > ptr->rows_in_array || num_rows > ptr->maxaccess || + ptr->mem_buffer == NULL) + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + + /* Make the desired part of the virtual array accessible */ + if (start_row < ptr->cur_start_row || + end_row > ptr->cur_start_row+ptr->rows_in_mem) { + if (! ptr->b_s_open) + ERREXIT(cinfo, JERR_VIRTUAL_BUG); + /* Flush old buffer contents if necessary */ + if (ptr->dirty) { + do_barray_io(cinfo, ptr, TRUE); + ptr->dirty = FALSE; + } + /* Decide what part of virtual array to access. + * Algorithm: if target address > current window, assume forward scan, + * load starting at target address. If target address < current window, + * assume backward scan, load so that target area is top of window. + * Note that when switching from forward write to forward read, will have + * start_row = 0, so the limiting case applies and we load from 0 anyway. + */ + if (start_row > ptr->cur_start_row) { + ptr->cur_start_row = start_row; + } else { + /* use long arithmetic here to avoid overflow & unsigned problems */ + long ltemp; + + ltemp = (long) end_row - (long) ptr->rows_in_mem; + if (ltemp < 0) + ltemp = 0; /* don't fall off front end of file */ + ptr->cur_start_row = (JDIMENSION) ltemp; + } + /* Read in the selected part of the array. + * During the initial write pass, we will do no actual read + * because the selected part is all undefined. + */ + do_barray_io(cinfo, ptr, FALSE); + } + /* Ensure the accessed part of the array is defined; prezero if needed. + * To improve locality of access, we only prezero the part of the array + * that the caller is about to access, not the entire in-memory array. + */ + if (ptr->first_undef_row < end_row) { + if (ptr->first_undef_row < start_row) { + if (writable) /* writer skipped over a section of array */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + undef_row = start_row; /* but reader is allowed to read ahead */ + } else { + undef_row = ptr->first_undef_row; + } + if (writable) + ptr->first_undef_row = end_row; + if (ptr->pre_zero) { + size_t bytesperrow = (size_t) ptr->blocksperrow * SIZEOF(JBLOCK); + undef_row -= ptr->cur_start_row; /* make indexes relative to buffer */ + end_row -= ptr->cur_start_row; + while (undef_row < end_row) { + jzero_far((void FAR *) ptr->mem_buffer[undef_row], bytesperrow); + undef_row++; + } + } else { + if (! writable) /* reader looking at undefined data */ + ERREXIT(cinfo, JERR_BAD_VIRTUAL_ACCESS); + } + } + /* Flag the buffer dirty if caller will write in it */ + if (writable) + ptr->dirty = TRUE; + /* Return address of proper part of the buffer */ + return ptr->mem_buffer + (start_row - ptr->cur_start_row); +} + + +/* + * Release all objects belonging to a specified pool. + */ + +METHODDEF(void) +free_pool (j_common_ptr cinfo, int pool_id) +{ + my_mem_ptr mem = (my_mem_ptr) cinfo->mem; + small_pool_ptr shdr_ptr; + large_pool_ptr lhdr_ptr; + size_t space_freed; + + if (pool_id < 0 || pool_id >= JPOOL_NUMPOOLS) + ERREXIT1(cinfo, JERR_BAD_POOL_ID, pool_id); /* safety check */ + +#ifdef MEM_STATS + if (cinfo->err->trace_level > 1) + print_mem_stats(cinfo, pool_id); /* print pool's memory usage statistics */ +#endif + + /* If freeing IMAGE pool, close any virtual arrays first */ + if (pool_id == JPOOL_IMAGE) { + jvirt_sarray_ptr sptr; + jvirt_barray_ptr bptr; + + for (sptr = mem->virt_sarray_list; sptr != NULL; sptr = sptr->next) { + if (sptr->b_s_open) { /* there may be no backing store */ + sptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*sptr->b_s_info.close_backing_store) (cinfo, & sptr->b_s_info); + } + } + mem->virt_sarray_list = NULL; + for (bptr = mem->virt_barray_list; bptr != NULL; bptr = bptr->next) { + if (bptr->b_s_open) { /* there may be no backing store */ + bptr->b_s_open = FALSE; /* prevent recursive close if error */ + (*bptr->b_s_info.close_backing_store) (cinfo, & bptr->b_s_info); + } + } + mem->virt_barray_list = NULL; + } + + /* Release large objects */ + lhdr_ptr = mem->large_list[pool_id]; + mem->large_list[pool_id] = NULL; + + while (lhdr_ptr != NULL) { + large_pool_ptr next_lhdr_ptr = lhdr_ptr->hdr.next; + space_freed = lhdr_ptr->hdr.bytes_used + + lhdr_ptr->hdr.bytes_left + + SIZEOF(large_pool_hdr); + jpeg_free_large(cinfo, (void FAR *) lhdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + lhdr_ptr = next_lhdr_ptr; + } + + /* Release small objects */ + shdr_ptr = mem->small_list[pool_id]; + mem->small_list[pool_id] = NULL; + + while (shdr_ptr != NULL) { + small_pool_ptr next_shdr_ptr = shdr_ptr->hdr.next; + space_freed = shdr_ptr->hdr.bytes_used + + shdr_ptr->hdr.bytes_left + + SIZEOF(small_pool_hdr); + jpeg_free_small(cinfo, (void *) shdr_ptr, space_freed); + mem->total_space_allocated -= space_freed; + shdr_ptr = next_shdr_ptr; + } +} + + +/* + * Close up shop entirely. + * Note that this cannot be called unless cinfo->mem is non-NULL. + */ + +METHODDEF(void) +self_destruct (j_common_ptr cinfo) +{ + int pool; + + /* Close all backing store, release all memory. + * Releasing pools in reverse order might help avoid fragmentation + * with some (brain-damaged) malloc libraries. + */ + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + free_pool(cinfo, pool); + } + + /* Release the memory manager control block too. */ + jpeg_free_small(cinfo, (void *) cinfo->mem, SIZEOF(my_memory_mgr)); + cinfo->mem = NULL; /* ensures I will be called only once */ + + jpeg_mem_term(cinfo); /* system-dependent cleanup */ +} + + +/* + * Memory manager initialization. + * When this is called, only the error manager pointer is valid in cinfo! + */ + +GLOBAL(void) +jinit_memory_mgr (j_common_ptr cinfo) +{ + my_mem_ptr mem; + long max_to_use; + int pool; + size_t test_mac; + + cinfo->mem = NULL; /* for safety if init fails */ + + /* Check for configuration errors. + * SIZEOF(ALIGN_TYPE) should be a power of 2; otherwise, it probably + * doesn't reflect any real hardware alignment requirement. + * The test is a little tricky: for X>0, X and X-1 have no one-bits + * in common if and only if X is a power of 2, ie has only one one-bit. + * Some compilers may give an "unreachable code" warning here; ignore it. + */ + if ((SIZEOF(ALIGN_TYPE) & (SIZEOF(ALIGN_TYPE)-1)) != 0) + ERREXIT(cinfo, JERR_BAD_ALIGN_TYPE); + /* MAX_ALLOC_CHUNK must be representable as type size_t, and must be + * a multiple of SIZEOF(ALIGN_TYPE). + * Again, an "unreachable code" warning may be ignored here. + * But a "constant too large" warning means you need to fix MAX_ALLOC_CHUNK. + */ + test_mac = (size_t) MAX_ALLOC_CHUNK; + if ((long) test_mac != MAX_ALLOC_CHUNK || + (MAX_ALLOC_CHUNK % SIZEOF(ALIGN_TYPE)) != 0) + ERREXIT(cinfo, JERR_BAD_ALLOC_CHUNK); + + max_to_use = jpeg_mem_init(cinfo); /* system-dependent initialization */ + + /* Attempt to allocate memory manager's control block */ + mem = (my_mem_ptr) jpeg_get_small(cinfo, SIZEOF(my_memory_mgr)); + + if (mem == NULL) { + jpeg_mem_term(cinfo); /* system-dependent cleanup */ + ERREXIT1(cinfo, JERR_OUT_OF_MEMORY, 0); + } + + /* OK, fill in the method pointers */ + mem->pub.alloc_small = alloc_small; + mem->pub.alloc_large = alloc_large; + mem->pub.alloc_sarray = alloc_sarray; + mem->pub.alloc_barray = alloc_barray; + mem->pub.request_virt_sarray = request_virt_sarray; + mem->pub.request_virt_barray = request_virt_barray; + mem->pub.realize_virt_arrays = realize_virt_arrays; + mem->pub.access_virt_sarray = access_virt_sarray; + mem->pub.access_virt_barray = access_virt_barray; + mem->pub.free_pool = free_pool; + mem->pub.self_destruct = self_destruct; + + /* Make MAX_ALLOC_CHUNK accessible to other modules */ + mem->pub.max_alloc_chunk = MAX_ALLOC_CHUNK; + + /* Initialize working state */ + mem->pub.max_memory_to_use = max_to_use; + + for (pool = JPOOL_NUMPOOLS-1; pool >= JPOOL_PERMANENT; pool--) { + mem->small_list[pool] = NULL; + mem->large_list[pool] = NULL; + } + mem->virt_sarray_list = NULL; + mem->virt_barray_list = NULL; + + mem->total_space_allocated = SIZEOF(my_memory_mgr); + + /* Declare ourselves open for business */ + cinfo->mem = & mem->pub; + + /* Check for an environment variable JPEGMEM; if found, override the + * default max_memory setting from jpeg_mem_init. Note that the + * surrounding application may again override this value. + * If your system doesn't support getenv(), define NO_GETENV to disable + * this feature. + */ +#ifndef NO_GETENV + { char * memenv; + + if ((memenv = getenv("JPEGMEM")) != NULL) { + char ch = 'x'; + + if (sscanf(memenv, "%ld%c", &max_to_use, &ch) > 0) { + if (ch == 'm' || ch == 'M') + max_to_use *= 1000L; + mem->pub.max_memory_to_use = max_to_use * 1000L; + } + } + } +#endif + +} diff --git a/src/3rdparty/libjpeg/jmemname.c b/src/3rdparty/libjpeg/jmemname.c new file mode 100644 index 0000000..ed96dee --- /dev/null +++ b/src/3rdparty/libjpeg/jmemname.c @@ -0,0 +1,276 @@ +/* + * jmemname.c + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a generic implementation of the system-dependent + * portion of the JPEG memory manager. This implementation assumes that + * you must explicitly construct a name for each temp file. + * Also, the problem of determining the amount of memory available + * is shoved onto the user. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + +#ifndef SEEK_SET /* pre-ANSI systems may not define this; */ +#define SEEK_SET 0 /* if not, assume 0 is correct */ +#endif + +#ifdef DONT_USE_B_MODE /* define mode parameters for fopen() */ +#define READ_BINARY "r" +#define RW_BINARY "w+" +#else +#ifdef VMS /* VMS is very nonstandard */ +#define READ_BINARY "rb", "ctx=stm" +#define RW_BINARY "w+b", "ctx=stm" +#else /* standard ANSI-compliant case */ +#define READ_BINARY "rb" +#define RW_BINARY "w+b" +#endif +#endif + + +/* + * Selection of a file name for a temporary file. + * This is system-dependent! + * + * The code as given is suitable for most Unix systems, and it is easily + * modified for most non-Unix systems. Some notes: + * 1. The temp file is created in the directory named by TEMP_DIRECTORY. + * The default value is /usr/tmp, which is the conventional place for + * creating large temp files on Unix. On other systems you'll probably + * want to change the file location. You can do this by editing the + * #define, or (preferred) by defining TEMP_DIRECTORY in jconfig.h. + * + * 2. If you need to change the file name as well as its location, + * you can override the TEMP_FILE_NAME macro. (Note that this is + * actually a printf format string; it must contain %s and %d.) + * Few people should need to do this. + * + * 3. mktemp() is used to ensure that multiple processes running + * simultaneously won't select the same file names. If your system + * doesn't have mktemp(), define NO_MKTEMP to do it the hard way. + * (If you don't have , also define NO_ERRNO_H.) + * + * 4. You probably want to define NEED_SIGNAL_CATCHER so that cjpeg.c/djpeg.c + * will cause the temp files to be removed if you stop the program early. + */ + +#ifndef TEMP_DIRECTORY /* can override from jconfig.h or Makefile */ +#define TEMP_DIRECTORY "/usr/tmp/" /* recommended setting for Unix */ +#endif + +static int next_file_num; /* to distinguish among several temp files */ + +#ifdef NO_MKTEMP + +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "%sJPG%03d.TMP" +#endif + +#ifndef NO_ERRNO_H +#include /* to define ENOENT */ +#endif + +/* ANSI C specifies that errno is a macro, but on older systems it's more + * likely to be a plain int variable. And not all versions of errno.h + * bother to declare it, so we have to in order to be most portable. Thus: + */ +#ifndef errno +extern int errno; +#endif + + +LOCAL(void) +select_file_name (char * fname) +{ + FILE * tfile; + + /* Keep generating file names till we find one that's not in use */ + for (;;) { + next_file_num++; /* advance counter */ + sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); + if ((tfile = fopen(fname, READ_BINARY)) == NULL) { + /* fopen could have failed for a reason other than the file not + * being there; for example, file there but unreadable. + * If isn't available, then we cannot test the cause. + */ +#ifdef ENOENT + if (errno != ENOENT) + continue; +#endif + break; + } + fclose(tfile); /* oops, it's there; close tfile & try again */ + } +} + +#else /* ! NO_MKTEMP */ + +/* Note that mktemp() requires the initial filename to end in six X's */ +#ifndef TEMP_FILE_NAME /* can override from jconfig.h or Makefile */ +#define TEMP_FILE_NAME "%sJPG%dXXXXXX" +#endif + +LOCAL(void) +select_file_name (char * fname) +{ + next_file_num++; /* advance counter */ + sprintf(fname, TEMP_FILE_NAME, TEMP_DIRECTORY, next_file_num); + mktemp(fname); /* make sure file name is unique */ + /* mktemp replaces the trailing XXXXXX with a unique string of characters */ +} + +#endif /* NO_MKTEMP */ + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * It's impossible to do this in a portable way; our current solution is + * to make the user tell us (with a default value set at compile time). + * If you can actually get the available space, it's a good idea to subtract + * a slop factor of 5% or so. + */ + +#ifndef DEFAULT_MAX_MEM /* so can override from makefile */ +#define DEFAULT_MAX_MEM 1000000L /* default: one megabyte */ +#endif + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return cinfo->mem->max_memory_to_use - already_allocated; +} + + +/* + * Backing store (temporary file) management. + * Backing store objects are only used when the value returned by + * jpeg_mem_available is less than the total space needed. You can dispense + * with these routines if you have plenty of virtual memory; see jmemnobs.c. + */ + + +METHODDEF(void) +read_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFREAD(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_READ); +} + + +METHODDEF(void) +write_backing_store (j_common_ptr cinfo, backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count) +{ + if (fseek(info->temp_file, file_offset, SEEK_SET)) + ERREXIT(cinfo, JERR_TFILE_SEEK); + if (JFWRITE(info->temp_file, buffer_address, byte_count) + != (size_t) byte_count) + ERREXIT(cinfo, JERR_TFILE_WRITE); +} + + +METHODDEF(void) +close_backing_store (j_common_ptr cinfo, backing_store_ptr info) +{ + fclose(info->temp_file); /* close the file */ + unlink(info->temp_name); /* delete the file */ +/* If your system doesn't have unlink(), use remove() instead. + * remove() is the ANSI-standard name for this function, but if + * your system was ANSI you'd be using jmemansi.c, right? + */ + TRACEMSS(cinfo, 1, JTRC_TFILE_CLOSE, info->temp_name); +} + + +/* + * Initial opening of a backing-store object. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + select_file_name(info->temp_name); + if ((info->temp_file = fopen(info->temp_name, RW_BINARY)) == NULL) + ERREXITS(cinfo, JERR_TFILE_CREATE, info->temp_name); + info->read_backing_store = read_backing_store; + info->write_backing_store = write_backing_store; + info->close_backing_store = close_backing_store; + TRACEMSS(cinfo, 1, JTRC_TFILE_OPEN, info->temp_name); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + next_file_num = 0; /* initialize temp file name generator */ + return DEFAULT_MAX_MEM; /* default for max_memory_to_use */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/3rdparty/libjpeg/jmemnobs.c b/src/3rdparty/libjpeg/jmemnobs.c new file mode 100644 index 0000000..eb8c337 --- /dev/null +++ b/src/3rdparty/libjpeg/jmemnobs.c @@ -0,0 +1,109 @@ +/* + * jmemnobs.c + * + * Copyright (C) 1992-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides a really simple implementation of the system- + * dependent portion of the JPEG memory manager. This implementation + * assumes that no backing-store files are needed: all required space + * can be obtained from malloc(). + * This is very portable in the sense that it'll compile on almost anything, + * but you'd better have lots of main memory (or virtual memory) if you want + * to process big images. + * Note that the max_memory_to_use option is ignored by this implementation. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" +#include "jmemsys.h" /* import the system-dependent declarations */ + +#ifndef HAVE_STDLIB_H /* should declare malloc(),free() */ +extern void * malloc JPP((size_t size)); +extern void free JPP((void *ptr)); +#endif + + +/* + * Memory allocation and freeing are controlled by the regular library + * routines malloc() and free(). + */ + +GLOBAL(void *) +jpeg_get_small (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_small (j_common_ptr cinfo, void * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * "Large" objects are treated the same as "small" ones. + * NB: although we include FAR keywords in the routine declarations, + * this file won't actually work in 80x86 small/medium model; at least, + * you probably won't be able to process useful-size images in only 64KB. + */ + +GLOBAL(void FAR *) +jpeg_get_large (j_common_ptr cinfo, size_t sizeofobject) +{ + return (void FAR *) malloc(sizeofobject); +} + +GLOBAL(void) +jpeg_free_large (j_common_ptr cinfo, void FAR * object, size_t sizeofobject) +{ + free(object); +} + + +/* + * This routine computes the total memory space available for allocation. + * Here we always say, "we got all you want bud!" + */ + +GLOBAL(long) +jpeg_mem_available (j_common_ptr cinfo, long min_bytes_needed, + long max_bytes_needed, long already_allocated) +{ + return max_bytes_needed; +} + + +/* + * Backing store (temporary file) management. + * Since jpeg_mem_available always promised the moon, + * this should never be called and we can just error out. + */ + +GLOBAL(void) +jpeg_open_backing_store (j_common_ptr cinfo, backing_store_ptr info, + long total_bytes_needed) +{ + ERREXIT(cinfo, JERR_NO_BACKING_STORE); +} + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. Here, there isn't any. + */ + +GLOBAL(long) +jpeg_mem_init (j_common_ptr cinfo) +{ + return 0; /* just set max_memory_to_use to 0 */ +} + +GLOBAL(void) +jpeg_mem_term (j_common_ptr cinfo) +{ + /* no work */ +} diff --git a/src/3rdparty/libjpeg/jmemsys.h b/src/3rdparty/libjpeg/jmemsys.h new file mode 100644 index 0000000..6c3c6d3 --- /dev/null +++ b/src/3rdparty/libjpeg/jmemsys.h @@ -0,0 +1,198 @@ +/* + * jmemsys.h + * + * Copyright (C) 1992-1997, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This include file defines the interface between the system-independent + * and system-dependent portions of the JPEG memory manager. No other + * modules need include it. (The system-independent portion is jmemmgr.c; + * there are several different versions of the system-dependent portion.) + * + * This file works as-is for the system-dependent memory managers supplied + * in the IJG distribution. You may need to modify it if you write a + * custom memory manager. If system-dependent changes are needed in + * this file, the best method is to #ifdef them based on a configuration + * symbol supplied in jconfig.h, as we have done with USE_MSDOS_MEMMGR + * and USE_MAC_MEMMGR. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_get_small jGetSmall +#define jpeg_free_small jFreeSmall +#define jpeg_get_large jGetLarge +#define jpeg_free_large jFreeLarge +#define jpeg_mem_available jMemAvail +#define jpeg_open_backing_store jOpenBackStore +#define jpeg_mem_init jMemInit +#define jpeg_mem_term jMemTerm +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * These two functions are used to allocate and release small chunks of + * memory. (Typically the total amount requested through jpeg_get_small is + * no more than 20K or so; this will be requested in chunks of a few K each.) + * Behavior should be the same as for the standard library functions malloc + * and free; in particular, jpeg_get_small must return NULL on failure. + * On most systems, these ARE malloc and free. jpeg_free_small is passed the + * size of the object being freed, just in case it's needed. + * On an 80x86 machine using small-data memory model, these manage near heap. + */ + +EXTERN(void *) jpeg_get_small JPP((j_common_ptr cinfo, size_t sizeofobject)); +EXTERN(void) jpeg_free_small JPP((j_common_ptr cinfo, void * object, + size_t sizeofobject)); + +/* + * These two functions are used to allocate and release large chunks of + * memory (up to the total free space designated by jpeg_mem_available). + * The interface is the same as above, except that on an 80x86 machine, + * far pointers are used. On most other machines these are identical to + * the jpeg_get/free_small routines; but we keep them separate anyway, + * in case a different allocation strategy is desirable for large chunks. + */ + +EXTERN(void FAR *) jpeg_get_large JPP((j_common_ptr cinfo, + size_t sizeofobject)); +EXTERN(void) jpeg_free_large JPP((j_common_ptr cinfo, void FAR * object, + size_t sizeofobject)); + +/* + * The macro MAX_ALLOC_CHUNK designates the maximum number of bytes that may + * be requested in a single call to jpeg_get_large (and jpeg_get_small for that + * matter, but that case should never come into play). This macro is needed + * to model the 64Kb-segment-size limit of far addressing on 80x86 machines. + * On those machines, we expect that jconfig.h will provide a proper value. + * On machines with 32-bit flat address spaces, any large constant may be used. + * + * NB: jmemmgr.c expects that MAX_ALLOC_CHUNK will be representable as type + * size_t and will be a multiple of sizeof(align_type). + */ + +#ifndef MAX_ALLOC_CHUNK /* may be overridden in jconfig.h */ +#define MAX_ALLOC_CHUNK 1000000000L +#endif + +/* + * This routine computes the total space still available for allocation by + * jpeg_get_large. If more space than this is needed, backing store will be + * used. NOTE: any memory already allocated must not be counted. + * + * There is a minimum space requirement, corresponding to the minimum + * feasible buffer sizes; jmemmgr.c will request that much space even if + * jpeg_mem_available returns zero. The maximum space needed, enough to hold + * all working storage in memory, is also passed in case it is useful. + * Finally, the total space already allocated is passed. If no better + * method is available, cinfo->mem->max_memory_to_use - already_allocated + * is often a suitable calculation. + * + * It is OK for jpeg_mem_available to underestimate the space available + * (that'll just lead to more backing-store access than is really necessary). + * However, an overestimate will lead to failure. Hence it's wise to subtract + * a slop factor from the true available space. 5% should be enough. + * + * On machines with lots of virtual memory, any large constant may be returned. + * Conversely, zero may be returned to always use the minimum amount of memory. + */ + +EXTERN(long) jpeg_mem_available JPP((j_common_ptr cinfo, + long min_bytes_needed, + long max_bytes_needed, + long already_allocated)); + + +/* + * This structure holds whatever state is needed to access a single + * backing-store object. The read/write/close method pointers are called + * by jmemmgr.c to manipulate the backing-store object; all other fields + * are private to the system-dependent backing store routines. + */ + +#define TEMP_NAME_LENGTH 64 /* max length of a temporary file's name */ + + +#ifdef USE_MSDOS_MEMMGR /* DOS-specific junk */ + +typedef unsigned short XMSH; /* type of extended-memory handles */ +typedef unsigned short EMSH; /* type of expanded-memory handles */ + +typedef union { + short file_handle; /* DOS file handle if it's a temp file */ + XMSH xms_handle; /* handle if it's a chunk of XMS */ + EMSH ems_handle; /* handle if it's a chunk of EMS */ +} handle_union; + +#endif /* USE_MSDOS_MEMMGR */ + +#ifdef USE_MAC_MEMMGR /* Mac-specific junk */ +#include +#endif /* USE_MAC_MEMMGR */ + + +typedef struct backing_store_struct * backing_store_ptr; + +typedef struct backing_store_struct { + /* Methods for reading/writing/closing this backing-store object */ + JMETHOD(void, read_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, write_backing_store, (j_common_ptr cinfo, + backing_store_ptr info, + void FAR * buffer_address, + long file_offset, long byte_count)); + JMETHOD(void, close_backing_store, (j_common_ptr cinfo, + backing_store_ptr info)); + + /* Private fields for system-dependent backing-store management */ +#ifdef USE_MSDOS_MEMMGR + /* For the MS-DOS manager (jmemdos.c), we need: */ + handle_union handle; /* reference to backing-store storage object */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else +#ifdef USE_MAC_MEMMGR + /* For the Mac manager (jmemmac.c), we need: */ + short temp_file; /* file reference number to temp file */ + FSSpec tempSpec; /* the FSSpec for the temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name if it's a file */ +#else + /* For a typical implementation with temp files, we need: */ + FILE * temp_file; /* stdio reference to temp file */ + char temp_name[TEMP_NAME_LENGTH]; /* name of temp file */ +#endif +#endif +} backing_store_info; + + +/* + * Initial opening of a backing-store object. This must fill in the + * read/write/close pointers in the object. The read/write routines + * may take an error exit if the specified maximum file size is exceeded. + * (If jpeg_mem_available always returns a large value, this routine can + * just take an error exit.) + */ + +EXTERN(void) jpeg_open_backing_store JPP((j_common_ptr cinfo, + backing_store_ptr info, + long total_bytes_needed)); + + +/* + * These routines take care of any system-dependent initialization and + * cleanup required. jpeg_mem_init will be called before anything is + * allocated (and, therefore, nothing in cinfo is of use except the error + * manager pointer). It should return a suitable default value for + * max_memory_to_use; this may subsequently be overridden by the surrounding + * application. (Note that max_memory_to_use is only important if + * jpeg_mem_available chooses to consult it ... no one else will.) + * jpeg_mem_term may assume that all requested memory has been freed and that + * all opened backing-store objects have been closed. + */ + +EXTERN(long) jpeg_mem_init JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_mem_term JPP((j_common_ptr cinfo)); diff --git a/src/3rdparty/libjpeg/jmorecfg.h b/src/3rdparty/libjpeg/jmorecfg.h new file mode 100644 index 0000000..928d052 --- /dev/null +++ b/src/3rdparty/libjpeg/jmorecfg.h @@ -0,0 +1,371 @@ +/* + * jmorecfg.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains additional configuration options that customize the + * JPEG software for special applications or support machine-dependent + * optimizations. Most users will not need to touch this file. + */ + + +/* + * Define BITS_IN_JSAMPLE as either + * 8 for 8-bit sample values (the usual setting) + * 12 for 12-bit sample values + * Only 8 and 12 are legal data precisions for lossy JPEG according to the + * JPEG standard, and the IJG code does not support anything else! + * We do not support run-time selection of data precision, sorry. + */ + +#define BITS_IN_JSAMPLE 8 /* use 8 or 12 */ + + +/* + * Maximum number of components (color channels) allowed in JPEG image. + * To meet the letter of the JPEG spec, set this to 255. However, darn + * few applications need more than 4 channels (maybe 5 for CMYK + alpha + * mask). We recommend 10 as a reasonable compromise; use 4 if you are + * really short on memory. (Each allowed component costs a hundred or so + * bytes of storage, whether actually used in an image or not.) + */ + +#define MAX_COMPONENTS 10 /* maximum number of image components */ + + +/* + * Basic data types. + * You may need to change these if you have a machine with unusual data + * type sizes; for example, "char" not 8 bits, "short" not 16 bits, + * or "long" not 32 bits. We don't care whether "int" is 16 or 32 bits, + * but it had better be at least 16. + */ + +/* Representation of a single sample (pixel element value). + * We frequently allocate large arrays of these, so it's important to keep + * them small. But if you have memory to burn and access to char or short + * arrays is very slow on your hardware, you might want to change these. + */ + +#if BITS_IN_JSAMPLE == 8 +/* JSAMPLE should be the smallest type that will hold the values 0..255. + * You can use a signed char by having GETJSAMPLE mask it with 0xFF. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JSAMPLE; +#ifdef CHAR_IS_UNSIGNED +#define GETJSAMPLE(value) ((int) (value)) +#else +#define GETJSAMPLE(value) ((int) (value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + +#define MAXJSAMPLE 255 +#define CENTERJSAMPLE 128 + +#endif /* BITS_IN_JSAMPLE == 8 */ + + +#if BITS_IN_JSAMPLE == 12 +/* JSAMPLE should be the smallest type that will hold the values 0..4095. + * On nearly all machines "short" will do nicely. + */ + +typedef short JSAMPLE; +#define GETJSAMPLE(value) ((int) (value)) + +#define MAXJSAMPLE 4095 +#define CENTERJSAMPLE 2048 + +#endif /* BITS_IN_JSAMPLE == 12 */ + + +/* Representation of a DCT frequency coefficient. + * This should be a signed value of at least 16 bits; "short" is usually OK. + * Again, we allocate large arrays of these, but you can change to int + * if you have memory to burn and "short" is really slow. + */ + +typedef short JCOEF; + + +/* Compressed datastreams are represented as arrays of JOCTET. + * These must be EXACTLY 8 bits wide, at least once they are written to + * external storage. Note that when using the stdio data source/destination + * managers, this is also the data type passed to fread/fwrite. + */ + +#ifdef HAVE_UNSIGNED_CHAR + +typedef unsigned char JOCTET; +#define GETJOCTET(value) (value) + +#else /* not HAVE_UNSIGNED_CHAR */ + +typedef char JOCTET; +#ifdef CHAR_IS_UNSIGNED +#define GETJOCTET(value) (value) +#else +#define GETJOCTET(value) ((value) & 0xFF) +#endif /* CHAR_IS_UNSIGNED */ + +#endif /* HAVE_UNSIGNED_CHAR */ + + +/* These typedefs are used for various table entries and so forth. + * They must be at least as wide as specified; but making them too big + * won't cost a huge amount of memory, so we don't provide special + * extraction code like we did for JSAMPLE. (In other words, these + * typedefs live at a different point on the speed/space tradeoff curve.) + */ + +/* UINT8 must hold at least the values 0..255. */ + +#ifdef HAVE_UNSIGNED_CHAR +typedef unsigned char UINT8; +#else /* not HAVE_UNSIGNED_CHAR */ +#ifdef CHAR_IS_UNSIGNED +typedef char UINT8; +#else /* not CHAR_IS_UNSIGNED */ +typedef short UINT8; +#endif /* CHAR_IS_UNSIGNED */ +#endif /* HAVE_UNSIGNED_CHAR */ + +/* UINT16 must hold at least the values 0..65535. */ + +#ifdef HAVE_UNSIGNED_SHORT +typedef unsigned short UINT16; +#else /* not HAVE_UNSIGNED_SHORT */ +typedef unsigned int UINT16; +#endif /* HAVE_UNSIGNED_SHORT */ + +/* INT16 must hold at least the values -32768..32767. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT16 */ +typedef short INT16; +#endif + +/* INT32 must hold at least signed 32-bit values. */ + +#ifndef XMD_H /* X11/xmd.h correctly defines INT32 */ +#ifndef _BASETSD_H_ /* Microsoft defines it in basetsd.h */ +#ifndef _BASETSD_H /* MinGW is slightly different */ +#ifndef QGLOBAL_H /* Qt defines it in qglobal.h */ +typedef long INT32; +#endif +#endif +#endif +#endif + +/* Datatype used for image dimensions. The JPEG standard only supports + * images up to 64K*64K due to 16-bit fields in SOF markers. Therefore + * "unsigned int" is sufficient on all machines. However, if you need to + * handle larger images and you don't mind deviating from the spec, you + * can change this datatype. + */ + +typedef unsigned int JDIMENSION; + +#define JPEG_MAX_DIMENSION 65500L /* a tad under 64K to prevent overflows */ + + +/* These macros are used in all function definitions and extern declarations. + * You could modify them if you need to change function linkage conventions; + * in particular, you'll need to do that to make the library a Windows DLL. + * Another application is to make all functions global for use with debuggers + * or code profilers that require it. + */ + +/* a function called through method pointers: */ +#define METHODDEF(type) static type +/* a function used only in its module: */ +#define LOCAL(type) static type +/* a function referenced thru EXTERNs: */ +#define GLOBAL(type) type +/* a reference to a GLOBAL function: */ +#define EXTERN(type) extern type + + +/* This macro is used to declare a "method", that is, a function pointer. + * We want to supply prototype parameters if the compiler can cope. + * Note that the arglist parameter must be parenthesized! + * Again, you can customize this if you need special linkage keywords. + */ + +#ifdef HAVE_PROTOTYPES +#define JMETHOD(type,methodname,arglist) type (*methodname) arglist +#else +#define JMETHOD(type,methodname,arglist) type (*methodname) () +#endif + + +/* Here is the pseudo-keyword for declaring pointers that must be "far" + * on 80x86 machines. Most of the specialized coding for 80x86 is handled + * by just saying "FAR *" where such a pointer is needed. In a few places + * explicit coding is needed; see uses of the NEED_FAR_POINTERS symbol. + */ + +#ifndef FAR +#ifdef NEED_FAR_POINTERS +#define FAR far +#else +#define FAR +#endif +#endif + + +/* + * On a few systems, type boolean and/or its values FALSE, TRUE may appear + * in standard header files. Or you may have conflicts with application- + * specific header files that you want to include together with these files. + * Defining HAVE_BOOLEAN before including jpeglib.h should make it work. + */ + +#ifndef HAVE_BOOLEAN +typedef int boolean; +#endif +#ifndef FALSE /* in case these macros already exist */ +#define FALSE 0 /* values of boolean */ +#endif +#ifndef TRUE +#define TRUE 1 +#endif + + +/* + * The remaining options affect code selection within the JPEG library, + * but they don't need to be visible to most applications using the library. + * To minimize application namespace pollution, the symbols won't be + * defined unless JPEG_INTERNALS or JPEG_INTERNAL_OPTIONS has been defined. + */ + +#ifdef JPEG_INTERNALS +#define JPEG_INTERNAL_OPTIONS +#endif + +#ifdef JPEG_INTERNAL_OPTIONS + + +/* + * These defines indicate whether to include various optional functions. + * Undefining some of these symbols will produce a smaller but less capable + * library. Note that you can leave certain source files out of the + * compilation/linking process if you've #undef'd the corresponding symbols. + * (You may HAVE to do that if your compiler doesn't like null source files.) + */ + +/* Capability options common to encoder and decoder: */ + +#define DCT_ISLOW_SUPPORTED /* slow but accurate integer algorithm */ +#define DCT_IFAST_SUPPORTED /* faster, less accurate integer method */ +#define DCT_FLOAT_SUPPORTED /* floating-point: accurate, fast on fast HW */ + +/* Encoder capability options: */ + +#define C_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define C_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define C_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define DCT_SCALING_SUPPORTED /* Input rescaling via DCT? (Requires DCT_ISLOW)*/ +#define ENTROPY_OPT_SUPPORTED /* Optimization of entropy coding parms? */ +/* Note: if you selected 12-bit data precision, it is dangerous to turn off + * ENTROPY_OPT_SUPPORTED. The standard Huffman tables are only good for 8-bit + * precision, so jchuff.c normally uses entropy optimization to compute + * usable tables for higher precision. If you don't want to do optimization, + * you'll have to supply different default Huffman tables. + * The exact same statements apply for progressive JPEG: the default tables + * don't work for progressive mode. (This may get fixed, however.) + */ +#define INPUT_SMOOTHING_SUPPORTED /* Input image smoothing option? */ + +/* Decoder capability options: */ + +#define D_ARITH_CODING_SUPPORTED /* Arithmetic coding back end? */ +#define D_MULTISCAN_FILES_SUPPORTED /* Multiple-scan JPEG files? */ +#define D_PROGRESSIVE_SUPPORTED /* Progressive JPEG? (Requires MULTISCAN)*/ +#define IDCT_SCALING_SUPPORTED /* Output rescaling via IDCT? */ +#define SAVE_MARKERS_SUPPORTED /* jpeg_save_markers() needed? */ +#define BLOCK_SMOOTHING_SUPPORTED /* Block smoothing? (Progressive only) */ +#undef UPSAMPLE_SCALING_SUPPORTED /* Output rescaling at upsample stage? */ +#define UPSAMPLE_MERGING_SUPPORTED /* Fast path for sloppy upsampling? */ +#define QUANT_1PASS_SUPPORTED /* 1-pass color quantization? */ +#define QUANT_2PASS_SUPPORTED /* 2-pass color quantization? */ + +/* more capability options later, no doubt */ + + +/* + * Ordering of RGB data in scanlines passed to or from the application. + * If your application wants to deal with data in the order B,G,R, just + * change these macros. You can also deal with formats such as R,G,B,X + * (one extra byte per pixel) by changing RGB_PIXELSIZE. Note that changing + * the offsets will also change the order in which colormap data is organized. + * RESTRICTIONS: + * 1. The sample applications cjpeg,djpeg do NOT support modified RGB formats. + * 2. These macros only affect RGB<=>YCbCr color conversion, so they are not + * useful if you are using JPEG color spaces other than YCbCr or grayscale. + * 3. The color quantizer modules will not behave desirably if RGB_PIXELSIZE + * is not 3 (they don't understand about dummy color components!). So you + * can't use color quantization if you change that value. + */ + +#define RGB_RED 0 /* Offset of Red in an RGB scanline element */ +#define RGB_GREEN 1 /* Offset of Green */ +#define RGB_BLUE 2 /* Offset of Blue */ +#define RGB_PIXELSIZE 3 /* JSAMPLEs per RGB scanline element */ + + +/* Definitions for speed-related optimizations. */ + + +/* If your compiler supports inline functions, define INLINE + * as the inline keyword; otherwise define it as empty. + */ + +#ifndef INLINE +#ifdef __GNUC__ /* for instance, GNU C knows about inline */ +#define INLINE __inline__ +#endif +#ifndef INLINE +#define INLINE /* default is to define it as empty */ +#endif +#endif + + +/* On some machines (notably 68000 series) "int" is 32 bits, but multiplying + * two 16-bit shorts is faster than multiplying two ints. Define MULTIPLIER + * as short on such a machine. MULTIPLIER must be at least 16 bits wide. + */ + +#ifndef MULTIPLIER +#define MULTIPLIER int /* type for fastest integer multiply */ +#endif + + +/* FAST_FLOAT should be either float or double, whichever is done faster + * by your compiler. (Note that this type is only used in the floating point + * DCT routines, so it only matters if you've defined DCT_FLOAT_SUPPORTED.) + * Typically, float is faster in ANSI C compilers, while double is faster in + * pre-ANSI compilers (because they insist on converting to double anyway). + * The code below therefore chooses float if we have ANSI-style prototypes. + */ + +#ifndef FAST_FLOAT +#ifdef HAVE_PROTOTYPES +#define FAST_FLOAT float +#else +#define FAST_FLOAT double +#endif +#endif + +#endif /* JPEG_INTERNAL_OPTIONS */ diff --git a/src/3rdparty/libjpeg/jpegint.h b/src/3rdparty/libjpeg/jpegint.h new file mode 100644 index 0000000..0c27a4e --- /dev/null +++ b/src/3rdparty/libjpeg/jpegint.h @@ -0,0 +1,407 @@ +/* + * jpegint.h + * + * Copyright (C) 1991-1997, Thomas G. Lane. + * Modified 1997-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file provides common declarations for the various JPEG modules. + * These declarations are considered internal to the JPEG library; most + * applications using the library shouldn't need to include this file. + */ + + +/* Declarations for both compression & decompression */ + +typedef enum { /* Operating modes for buffer controllers */ + JBUF_PASS_THRU, /* Plain stripwise operation */ + /* Remaining modes require a full-image buffer to have been created */ + JBUF_SAVE_SOURCE, /* Run source subobject only, save output */ + JBUF_CRANK_DEST, /* Run dest subobject only, using saved data */ + JBUF_SAVE_AND_PASS /* Run both subobjects, save output */ +} J_BUF_MODE; + +/* Values of global_state field (jdapi.c has some dependencies on ordering!) */ +#define CSTATE_START 100 /* after create_compress */ +#define CSTATE_SCANNING 101 /* start_compress done, write_scanlines OK */ +#define CSTATE_RAW_OK 102 /* start_compress done, write_raw_data OK */ +#define CSTATE_WRCOEFS 103 /* jpeg_write_coefficients done */ +#define DSTATE_START 200 /* after create_decompress */ +#define DSTATE_INHEADER 201 /* reading header markers, no SOS yet */ +#define DSTATE_READY 202 /* found SOS, ready for start_decompress */ +#define DSTATE_PRELOAD 203 /* reading multiscan file in start_decompress*/ +#define DSTATE_PRESCAN 204 /* performing dummy pass for 2-pass quant */ +#define DSTATE_SCANNING 205 /* start_decompress done, read_scanlines OK */ +#define DSTATE_RAW_OK 206 /* start_decompress done, read_raw_data OK */ +#define DSTATE_BUFIMAGE 207 /* expecting jpeg_start_output */ +#define DSTATE_BUFPOST 208 /* looking for SOS/EOI in jpeg_finish_output */ +#define DSTATE_RDCOEFS 209 /* reading file in jpeg_read_coefficients */ +#define DSTATE_STOPPING 210 /* looking for EOI in jpeg_finish_decompress */ + + +/* Declarations for compression modules */ + +/* Master control module */ +struct jpeg_comp_master { + JMETHOD(void, prepare_for_pass, (j_compress_ptr cinfo)); + JMETHOD(void, pass_startup, (j_compress_ptr cinfo)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean call_pass_startup; /* True if pass_startup must be called */ + boolean is_last_pass; /* True during last pass */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_c_main_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail)); +}; + +/* Compression preprocessing (downsampling input buffer control) */ +struct jpeg_c_prep_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, pre_process_data, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, + JDIMENSION *in_row_ctr, + JDIMENSION in_rows_avail, + JSAMPIMAGE output_buf, + JDIMENSION *out_row_group_ctr, + JDIMENSION out_row_groups_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_c_coef_controller { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(boolean, compress_data, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf)); +}; + +/* Colorspace conversion */ +struct jpeg_color_converter { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, color_convert, (j_compress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPIMAGE output_buf, + JDIMENSION output_row, int num_rows)); +}; + +/* Downsampling */ +struct jpeg_downsampler { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + JMETHOD(void, downsample, (j_compress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION in_row_index, + JSAMPIMAGE output_buf, + JDIMENSION out_row_group_index)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Forward DCT (also controls coefficient quantization) */ +typedef JMETHOD(void, forward_DCT_ptr, + (j_compress_ptr cinfo, jpeg_component_info * compptr, + JSAMPARRAY sample_data, JBLOCKROW coef_blocks, + JDIMENSION start_row, JDIMENSION start_col, + JDIMENSION num_blocks)); + +struct jpeg_forward_dct { + JMETHOD(void, start_pass, (j_compress_ptr cinfo)); + /* It is useful to allow each component to have a separate FDCT method. */ + forward_DCT_ptr forward_DCT[MAX_COMPONENTS]; +}; + +/* Entropy encoding */ +struct jpeg_entropy_encoder { + JMETHOD(void, start_pass, (j_compress_ptr cinfo, boolean gather_statistics)); + JMETHOD(boolean, encode_mcu, (j_compress_ptr cinfo, JBLOCKROW *MCU_data)); + JMETHOD(void, finish_pass, (j_compress_ptr cinfo)); +}; + +/* Marker writing */ +struct jpeg_marker_writer { + JMETHOD(void, write_file_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_frame_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_scan_header, (j_compress_ptr cinfo)); + JMETHOD(void, write_file_trailer, (j_compress_ptr cinfo)); + JMETHOD(void, write_tables_only, (j_compress_ptr cinfo)); + /* These routines are exported to allow insertion of extra markers */ + /* Probably only COM and APPn markers should be written this way */ + JMETHOD(void, write_marker_header, (j_compress_ptr cinfo, int marker, + unsigned int datalen)); + JMETHOD(void, write_marker_byte, (j_compress_ptr cinfo, int val)); +}; + + +/* Declarations for decompression modules */ + +/* Master control module */ +struct jpeg_decomp_master { + JMETHOD(void, prepare_for_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_output_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean is_dummy_pass; /* True during 1st pass for 2-pass quant */ +}; + +/* Input control module */ +struct jpeg_input_controller { + JMETHOD(int, consume_input, (j_decompress_ptr cinfo)); + JMETHOD(void, reset_input_controller, (j_decompress_ptr cinfo)); + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, finish_input_pass, (j_decompress_ptr cinfo)); + + /* State variables made visible to other modules */ + boolean has_multiple_scans; /* True if file has multiple scans */ + boolean eoi_reached; /* True when EOI has been consumed */ +}; + +/* Main buffer control (downsampled-data buffer) */ +struct jpeg_d_main_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, process_data, (j_decompress_ptr cinfo, + JSAMPARRAY output_buf, JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Coefficient buffer control */ +struct jpeg_d_coef_controller { + JMETHOD(void, start_input_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, consume_data, (j_decompress_ptr cinfo)); + JMETHOD(void, start_output_pass, (j_decompress_ptr cinfo)); + JMETHOD(int, decompress_data, (j_decompress_ptr cinfo, + JSAMPIMAGE output_buf)); + /* Pointer to array of coefficient virtual arrays, or NULL if none */ + jvirt_barray_ptr *coef_arrays; +}; + +/* Decompression postprocessing (color quantization buffer control) */ +struct jpeg_d_post_controller { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, J_BUF_MODE pass_mode)); + JMETHOD(void, post_process_data, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); +}; + +/* Marker reading & parsing */ +struct jpeg_marker_reader { + JMETHOD(void, reset_marker_reader, (j_decompress_ptr cinfo)); + /* Read markers until SOS or EOI. + * Returns same codes as are defined for jpeg_consume_input: + * JPEG_SUSPENDED, JPEG_REACHED_SOS, or JPEG_REACHED_EOI. + */ + JMETHOD(int, read_markers, (j_decompress_ptr cinfo)); + /* Read a restart marker --- exported for use by entropy decoder only */ + jpeg_marker_parser_method read_restart_marker; + + /* State of marker reader --- nominally internal, but applications + * supplying COM or APPn handlers might like to know the state. + */ + boolean saw_SOI; /* found SOI? */ + boolean saw_SOF; /* found SOF? */ + int next_restart_num; /* next restart number expected (0-7) */ + unsigned int discarded_bytes; /* # of bytes skipped looking for a marker */ +}; + +/* Entropy decoding */ +struct jpeg_entropy_decoder { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(boolean, decode_mcu, (j_decompress_ptr cinfo, + JBLOCKROW *MCU_data)); +}; + +/* Inverse DCT (also performs dequantization) */ +typedef JMETHOD(void, inverse_DCT_method_ptr, + (j_decompress_ptr cinfo, jpeg_component_info * compptr, + JCOEFPTR coef_block, + JSAMPARRAY output_buf, JDIMENSION output_col)); + +struct jpeg_inverse_dct { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + /* It is useful to allow each component to have a separate IDCT method. */ + inverse_DCT_method_ptr inverse_DCT[MAX_COMPONENTS]; +}; + +/* Upsampling (note that upsampler must also call color converter) */ +struct jpeg_upsampler { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, upsample, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, + JDIMENSION *in_row_group_ctr, + JDIMENSION in_row_groups_avail, + JSAMPARRAY output_buf, + JDIMENSION *out_row_ctr, + JDIMENSION out_rows_avail)); + + boolean need_context_rows; /* TRUE if need rows above & below */ +}; + +/* Colorspace conversion */ +struct jpeg_color_deconverter { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, color_convert, (j_decompress_ptr cinfo, + JSAMPIMAGE input_buf, JDIMENSION input_row, + JSAMPARRAY output_buf, int num_rows)); +}; + +/* Color quantization or color precision reduction */ +struct jpeg_color_quantizer { + JMETHOD(void, start_pass, (j_decompress_ptr cinfo, boolean is_pre_scan)); + JMETHOD(void, color_quantize, (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, + int num_rows)); + JMETHOD(void, finish_pass, (j_decompress_ptr cinfo)); + JMETHOD(void, new_color_map, (j_decompress_ptr cinfo)); +}; + + +/* Miscellaneous useful macros */ + +#undef MAX +#define MAX(a,b) ((a) > (b) ? (a) : (b)) +#undef MIN +#define MIN(a,b) ((a) < (b) ? (a) : (b)) + + +/* We assume that right shift corresponds to signed division by 2 with + * rounding towards minus infinity. This is correct for typical "arithmetic + * shift" instructions that shift in copies of the sign bit. But some + * C compilers implement >> with an unsigned shift. For these machines you + * must define RIGHT_SHIFT_IS_UNSIGNED. + * RIGHT_SHIFT provides a proper signed right shift of an INT32 quantity. + * It is only applied with constant shift counts. SHIFT_TEMPS must be + * included in the variables of any routine using RIGHT_SHIFT. + */ + +#ifdef RIGHT_SHIFT_IS_UNSIGNED +#define SHIFT_TEMPS INT32 shift_temp; +#define RIGHT_SHIFT(x,shft) \ + ((shift_temp = (x)) < 0 ? \ + (shift_temp >> (shft)) | ((~((INT32) 0)) << (32-(shft))) : \ + (shift_temp >> (shft))) +#else +#define SHIFT_TEMPS +#define RIGHT_SHIFT(x,shft) ((x) >> (shft)) +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jinit_compress_master jICompress +#define jinit_c_master_control jICMaster +#define jinit_c_main_controller jICMainC +#define jinit_c_prep_controller jICPrepC +#define jinit_c_coef_controller jICCoefC +#define jinit_color_converter jICColor +#define jinit_downsampler jIDownsampler +#define jinit_forward_dct jIFDCT +#define jinit_huff_encoder jIHEncoder +#define jinit_arith_encoder jIAEncoder +#define jinit_marker_writer jIMWriter +#define jinit_master_decompress jIDMaster +#define jinit_d_main_controller jIDMainC +#define jinit_d_coef_controller jIDCoefC +#define jinit_d_post_controller jIDPostC +#define jinit_input_controller jIInCtlr +#define jinit_marker_reader jIMReader +#define jinit_huff_decoder jIHDecoder +#define jinit_arith_decoder jIADecoder +#define jinit_inverse_dct jIIDCT +#define jinit_upsampler jIUpsampler +#define jinit_color_deconverter jIDColor +#define jinit_1pass_quantizer jI1Quant +#define jinit_2pass_quantizer jI2Quant +#define jinit_merged_upsampler jIMUpsampler +#define jinit_memory_mgr jIMemMgr +#define jdiv_round_up jDivRound +#define jround_up jRound +#define jcopy_sample_rows jCopySamples +#define jcopy_block_row jCopyBlocks +#define jzero_far jZeroFar +#define jpeg_zigzag_order jZIGTable +#define jpeg_natural_order jZAGTable +#define jpeg_natural_order7 jZAGTable7 +#define jpeg_natural_order6 jZAGTable6 +#define jpeg_natural_order5 jZAGTable5 +#define jpeg_natural_order4 jZAGTable4 +#define jpeg_natural_order3 jZAGTable3 +#define jpeg_natural_order2 jZAGTable2 +#define jpeg_aritab jAriTab +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Compression module initialization routines */ +EXTERN(void) jinit_compress_master JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_c_master_control JPP((j_compress_ptr cinfo, + boolean transcode_only)); +EXTERN(void) jinit_c_main_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_prep_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_c_coef_controller JPP((j_compress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_color_converter JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_downsampler JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_forward_dct JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_huff_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_arith_encoder JPP((j_compress_ptr cinfo)); +EXTERN(void) jinit_marker_writer JPP((j_compress_ptr cinfo)); +/* Decompression module initialization routines */ +EXTERN(void) jinit_master_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_d_main_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_coef_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_d_post_controller JPP((j_decompress_ptr cinfo, + boolean need_full_buffer)); +EXTERN(void) jinit_input_controller JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_marker_reader JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_huff_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_arith_decoder JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_inverse_dct JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_upsampler JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_color_deconverter JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_1pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_2pass_quantizer JPP((j_decompress_ptr cinfo)); +EXTERN(void) jinit_merged_upsampler JPP((j_decompress_ptr cinfo)); +/* Memory manager initialization */ +EXTERN(void) jinit_memory_mgr JPP((j_common_ptr cinfo)); + +/* Utility routines in jutils.c */ +EXTERN(long) jdiv_round_up JPP((long a, long b)); +EXTERN(long) jround_up JPP((long a, long b)); +EXTERN(void) jcopy_sample_rows JPP((JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols)); +EXTERN(void) jcopy_block_row JPP((JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks)); +EXTERN(void) jzero_far JPP((void FAR * target, size_t bytestozero)); +/* Constant tables in jutils.c */ +#if 0 /* This table is not actually needed in v6a */ +extern const int jpeg_zigzag_order[]; /* natural coef order to zigzag order */ +#endif +extern const int jpeg_natural_order[]; /* zigzag coef order to natural order */ +extern const int jpeg_natural_order7[]; /* zz to natural order for 7x7 block */ +extern const int jpeg_natural_order6[]; /* zz to natural order for 6x6 block */ +extern const int jpeg_natural_order5[]; /* zz to natural order for 5x5 block */ +extern const int jpeg_natural_order4[]; /* zz to natural order for 4x4 block */ +extern const int jpeg_natural_order3[]; /* zz to natural order for 3x3 block */ +extern const int jpeg_natural_order2[]; /* zz to natural order for 2x2 block */ + +/* Arithmetic coding probability estimation tables in jaricom.c */ +extern const INT32 jpeg_aritab[]; + +/* Suppress undefined-structure complaints if necessary. */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef AM_MEMORY_MANAGER /* only jmemmgr.c defines these */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +#endif +#endif /* INCOMPLETE_TYPES_BROKEN */ diff --git a/src/3rdparty/libjpeg/jpeglib.h b/src/3rdparty/libjpeg/jpeglib.h new file mode 100644 index 0000000..5039d4b --- /dev/null +++ b/src/3rdparty/libjpeg/jpeglib.h @@ -0,0 +1,1158 @@ +/* + * jpeglib.h + * + * Copyright (C) 1991-1998, Thomas G. Lane. + * Modified 2002-2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file defines the application interface for the JPEG library. + * Most applications using the library need only include this file, + * and perhaps jerror.h if they want to know the exact error codes. + */ + +#ifndef JPEGLIB_H +#define JPEGLIB_H + +/* + * First we include the configuration files that record how this + * installation of the JPEG library is set up. jconfig.h can be + * generated automatically for many systems. jmorecfg.h contains + * manual configuration options that most people need not worry about. + */ + +#ifndef JCONFIG_INCLUDED /* in case jinclude.h already did */ +#include "jconfig.h" /* widely used configuration options */ +#endif +#include "jmorecfg.h" /* seldom changed options */ + + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +extern "C" { +#endif +#endif + +/* Version ID for the JPEG library. + * Might be useful for tests like "#if JPEG_LIB_VERSION >= 80". + */ + +#define JPEG_LIB_VERSION 80 /* Version 8.0 */ + + +/* Various constants determining the sizes of things. + * All of these are specified by the JPEG standard, so don't change them + * if you want to be compatible. + */ + +#define DCTSIZE 8 /* The basic DCT block is 8x8 samples */ +#define DCTSIZE2 64 /* DCTSIZE squared; # of elements in a block */ +#define NUM_QUANT_TBLS 4 /* Quantization tables are numbered 0..3 */ +#define NUM_HUFF_TBLS 4 /* Huffman tables are numbered 0..3 */ +#define NUM_ARITH_TBLS 16 /* Arith-coding tables are numbered 0..15 */ +#define MAX_COMPS_IN_SCAN 4 /* JPEG limit on # of components in one scan */ +#define MAX_SAMP_FACTOR 4 /* JPEG limit on sampling factors */ +/* Unfortunately, some bozo at Adobe saw no reason to be bound by the standard; + * the PostScript DCT filter can emit files with many more than 10 blocks/MCU. + * If you happen to run across such a file, you can up D_MAX_BLOCKS_IN_MCU + * to handle it. We even let you do this from the jconfig.h file. However, + * we strongly discourage changing C_MAX_BLOCKS_IN_MCU; just because Adobe + * sometimes emits noncompliant files doesn't mean you should too. + */ +#define C_MAX_BLOCKS_IN_MCU 10 /* compressor's limit on blocks per MCU */ +#ifndef D_MAX_BLOCKS_IN_MCU +#define D_MAX_BLOCKS_IN_MCU 10 /* decompressor's limit on blocks per MCU */ +#endif + + +/* Data structures for images (arrays of samples and of DCT coefficients). + * On 80x86 machines, the image arrays are too big for near pointers, + * but the pointer arrays can fit in near memory. + */ + +typedef JSAMPLE FAR *JSAMPROW; /* ptr to one image row of pixel samples. */ +typedef JSAMPROW *JSAMPARRAY; /* ptr to some rows (a 2-D sample array) */ +typedef JSAMPARRAY *JSAMPIMAGE; /* a 3-D sample array: top index is color */ + +typedef JCOEF JBLOCK[DCTSIZE2]; /* one block of coefficients */ +typedef JBLOCK FAR *JBLOCKROW; /* pointer to one row of coefficient blocks */ +typedef JBLOCKROW *JBLOCKARRAY; /* a 2-D array of coefficient blocks */ +typedef JBLOCKARRAY *JBLOCKIMAGE; /* a 3-D array of coefficient blocks */ + +typedef JCOEF FAR *JCOEFPTR; /* useful in a couple of places */ + + +/* Types for JPEG compression parameters and working tables. */ + + +/* DCT coefficient quantization tables. */ + +typedef struct { + /* This array gives the coefficient quantizers in natural array order + * (not the zigzag order in which they are stored in a JPEG DQT marker). + * CAUTION: IJG versions prior to v6a kept this array in zigzag order. + */ + UINT16 quantval[DCTSIZE2]; /* quantization step for each coefficient */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JQUANT_TBL; + + +/* Huffman coding tables. */ + +typedef struct { + /* These two fields directly represent the contents of a JPEG DHT marker */ + UINT8 bits[17]; /* bits[k] = # of symbols with codes of */ + /* length k bits; bits[0] is unused */ + UINT8 huffval[256]; /* The symbols, in order of incr code length */ + /* This field is used only during compression. It's initialized FALSE when + * the table is created, and set TRUE when it's been output to the file. + * You could suppress output of a table by setting this to TRUE. + * (See jpeg_suppress_tables for an example.) + */ + boolean sent_table; /* TRUE when table has been output */ +} JHUFF_TBL; + + +/* Basic info about one component (color channel). */ + +typedef struct { + /* These values are fixed over the whole image. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOF marker. */ + int component_id; /* identifier for this component (0..255) */ + int component_index; /* its index in SOF or cinfo->comp_info[] */ + int h_samp_factor; /* horizontal sampling factor (1..4) */ + int v_samp_factor; /* vertical sampling factor (1..4) */ + int quant_tbl_no; /* quantization table selector (0..3) */ + /* These values may vary between scans. */ + /* For compression, they must be supplied by parameter setup; */ + /* for decompression, they are read from the SOS marker. */ + /* The decompressor output side may not use these variables. */ + int dc_tbl_no; /* DC entropy table selector (0..3) */ + int ac_tbl_no; /* AC entropy table selector (0..3) */ + + /* Remaining fields should be treated as private by applications. */ + + /* These values are computed during compression or decompression startup: */ + /* Component's size in DCT blocks. + * Any dummy blocks added to complete an MCU are not counted; therefore + * these values do not depend on whether a scan is interleaved or not. + */ + JDIMENSION width_in_blocks; + JDIMENSION height_in_blocks; + /* Size of a DCT block in samples, + * reflecting any scaling we choose to apply during the DCT step. + * Values from 1 to 16 are supported. + * Note that different components may receive different DCT scalings. + */ + int DCT_h_scaled_size; + int DCT_v_scaled_size; + /* The downsampled dimensions are the component's actual, unpadded number + * of samples at the main buffer (preprocessing/compression interface); + * DCT scaling is included, so + * downsampled_width = ceil(image_width * Hi/Hmax * DCT_h_scaled_size/DCTSIZE) + * and similarly for height. + */ + JDIMENSION downsampled_width; /* actual width in samples */ + JDIMENSION downsampled_height; /* actual height in samples */ + /* This flag is used only for decompression. In cases where some of the + * components will be ignored (eg grayscale output from YCbCr image), + * we can skip most computations for the unused components. + */ + boolean component_needed; /* do we need the value of this component? */ + + /* These values are computed before starting a scan of the component. */ + /* The decompressor output side may not use these variables. */ + int MCU_width; /* number of blocks per MCU, horizontally */ + int MCU_height; /* number of blocks per MCU, vertically */ + int MCU_blocks; /* MCU_width * MCU_height */ + int MCU_sample_width; /* MCU width in samples: MCU_width * DCT_h_scaled_size */ + int last_col_width; /* # of non-dummy blocks across in last MCU */ + int last_row_height; /* # of non-dummy blocks down in last MCU */ + + /* Saved quantization table for component; NULL if none yet saved. + * See jdinput.c comments about the need for this information. + * This field is currently used only for decompression. + */ + JQUANT_TBL * quant_table; + + /* Private per-component storage for DCT or IDCT subsystem. */ + void * dct_table; +} jpeg_component_info; + + +/* The script for encoding a multiple-scan file is an array of these: */ + +typedef struct { + int comps_in_scan; /* number of components encoded in this scan */ + int component_index[MAX_COMPS_IN_SCAN]; /* their SOF/comp_info[] indexes */ + int Ss, Se; /* progressive JPEG spectral selection parms */ + int Ah, Al; /* progressive JPEG successive approx. parms */ +} jpeg_scan_info; + +/* The decompressor can save APPn and COM markers in a list of these: */ + +typedef struct jpeg_marker_struct FAR * jpeg_saved_marker_ptr; + +struct jpeg_marker_struct { + jpeg_saved_marker_ptr next; /* next in list, or NULL */ + UINT8 marker; /* marker code: JPEG_COM, or JPEG_APP0+n */ + unsigned int original_length; /* # bytes of data in the file */ + unsigned int data_length; /* # bytes of data saved at data[] */ + JOCTET FAR * data; /* the data contained in the marker */ + /* the marker length word is not counted in data_length or original_length */ +}; + +/* Known color spaces. */ + +typedef enum { + JCS_UNKNOWN, /* error/unspecified */ + JCS_GRAYSCALE, /* monochrome */ + JCS_RGB, /* red/green/blue */ + JCS_YCbCr, /* Y/Cb/Cr (also known as YUV) */ + JCS_CMYK, /* C/M/Y/K */ + JCS_YCCK /* Y/Cb/Cr/K */ +} J_COLOR_SPACE; + +/* DCT/IDCT algorithm options. */ + +typedef enum { + JDCT_ISLOW, /* slow but accurate integer algorithm */ + JDCT_IFAST, /* faster, less accurate integer method */ + JDCT_FLOAT /* floating-point: accurate, fast on fast HW */ +} J_DCT_METHOD; + +#ifndef JDCT_DEFAULT /* may be overridden in jconfig.h */ +#define JDCT_DEFAULT JDCT_ISLOW +#endif +#ifndef JDCT_FASTEST /* may be overridden in jconfig.h */ +#define JDCT_FASTEST JDCT_IFAST +#endif + +/* Dithering options for decompression. */ + +typedef enum { + JDITHER_NONE, /* no dithering */ + JDITHER_ORDERED, /* simple ordered dither */ + JDITHER_FS /* Floyd-Steinberg error diffusion dither */ +} J_DITHER_MODE; + + +/* Common fields between JPEG compression and decompression master structs. */ + +#define jpeg_common_fields \ + struct jpeg_error_mgr * err; /* Error handler module */\ + struct jpeg_memory_mgr * mem; /* Memory manager module */\ + struct jpeg_progress_mgr * progress; /* Progress monitor, or NULL if none */\ + void * client_data; /* Available for use by application */\ + boolean is_decompressor; /* So common code can tell which is which */\ + int global_state /* For checking call sequence validity */ + +/* Routines that are to be used by both halves of the library are declared + * to receive a pointer to this structure. There are no actual instances of + * jpeg_common_struct, only of jpeg_compress_struct and jpeg_decompress_struct. + */ +struct jpeg_common_struct { + jpeg_common_fields; /* Fields common to both master struct types */ + /* Additional fields follow in an actual jpeg_compress_struct or + * jpeg_decompress_struct. All three structs must agree on these + * initial fields! (This would be a lot cleaner in C++.) + */ +}; + +typedef struct jpeg_common_struct * j_common_ptr; +typedef struct jpeg_compress_struct * j_compress_ptr; +typedef struct jpeg_decompress_struct * j_decompress_ptr; + + +/* Master record for a compression instance */ + +struct jpeg_compress_struct { + jpeg_common_fields; /* Fields shared with jpeg_decompress_struct */ + + /* Destination for compressed data */ + struct jpeg_destination_mgr * dest; + + /* Description of source image --- these fields must be filled in by + * outer application before starting compression. in_color_space must + * be correct before you can even call jpeg_set_defaults(). + */ + + JDIMENSION image_width; /* input image width */ + JDIMENSION image_height; /* input image height */ + int input_components; /* # of color components in input image */ + J_COLOR_SPACE in_color_space; /* colorspace of input image */ + + double input_gamma; /* image gamma of input image */ + + /* Compression parameters --- these fields must be set before calling + * jpeg_start_compress(). We recommend calling jpeg_set_defaults() to + * initialize everything to reasonable defaults, then changing anything + * the application specifically wants to change. That way you won't get + * burnt when new parameters are added. Also note that there are several + * helper routines to simplify changing parameters. + */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + JDIMENSION jpeg_width; /* scaled JPEG image width */ + JDIMENSION jpeg_height; /* scaled JPEG image height */ + /* Dimensions of actual JPEG image that will be written to file, + * derived from input dimensions by scaling factors above. + * These fields are computed by jpeg_start_compress(). + * You can also use jpeg_calc_jpeg_dimensions() to determine these values + * in advance of calling jpeg_start_compress(). + */ + + int data_precision; /* bits of precision in image data */ + + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + int q_scale_factor[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined, + * and corresponding scale factors (percentage, initialized 100). + */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + int num_scans; /* # of entries in scan_info array */ + const jpeg_scan_info * scan_info; /* script for multi-scan file, or NULL */ + /* The default value of scan_info is NULL, which causes a single-scan + * sequential JPEG file to be emitted. To create a multi-scan file, + * set num_scans and scan_info to point to an array of scan definitions. + */ + + boolean raw_data_in; /* TRUE=caller supplies downsampled data */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + boolean optimize_coding; /* TRUE=optimize entropy encoding parms */ + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + boolean do_fancy_downsampling; /* TRUE=apply fancy downsampling */ + int smoothing_factor; /* 1..100, or 0 for no input smoothing */ + J_DCT_METHOD dct_method; /* DCT algorithm selector */ + + /* The restart interval can be specified in absolute MCUs by setting + * restart_interval, or in MCU rows by setting restart_in_rows + * (in which case the correct restart_interval will be figured + * for each scan). + */ + unsigned int restart_interval; /* MCUs per restart, or 0 for no restart */ + int restart_in_rows; /* if > 0, MCU rows per restart interval */ + + /* Parameters controlling emission of special markers. */ + + boolean write_JFIF_header; /* should a JFIF marker be written? */ + UINT8 JFIF_major_version; /* What to write for the JFIF version number */ + UINT8 JFIF_minor_version; + /* These three values are not used by the JPEG code, merely copied */ + /* into the JFIF APP0 marker. density_unit can be 0 for unknown, */ + /* 1 for dots/inch, or 2 for dots/cm. Note that the pixel aspect */ + /* ratio is defined by X_density/Y_density even when density_unit=0. */ + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean write_Adobe_marker; /* should an Adobe marker be written? */ + + /* State variable: index of next scanline to be written to + * jpeg_write_scanlines(). Application may use this to control its + * processing loop, e.g., "while (next_scanline < image_height)". + */ + + JDIMENSION next_scanline; /* 0 .. image_height-1 */ + + /* Remaining fields are known throughout compressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during compression startup + */ + boolean progressive_mode; /* TRUE if scan script uses progressive mode */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows to be input to coef ctlr */ + /* The coefficient controller receives data in units of MCU rows as defined + * for fully interleaved scans (whether the JPEG file is interleaved or not). + * There are v_samp_factor * DCTSIZE sample rows of each component in an + * "iMCU" (interleaved MCU) row. + */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[C_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) */ + + /* + * Links to compression subobjects (methods and private variables of modules) + */ + struct jpeg_comp_master * master; + struct jpeg_c_main_controller * main; + struct jpeg_c_prep_controller * prep; + struct jpeg_c_coef_controller * coef; + struct jpeg_marker_writer * marker; + struct jpeg_color_converter * cconvert; + struct jpeg_downsampler * downsample; + struct jpeg_forward_dct * fdct; + struct jpeg_entropy_encoder * entropy; + jpeg_scan_info * script_space; /* workspace for jpeg_simple_progression */ + int script_space_size; +}; + + +/* Master record for a decompression instance */ + +struct jpeg_decompress_struct { + jpeg_common_fields; /* Fields shared with jpeg_compress_struct */ + + /* Source of compressed data */ + struct jpeg_source_mgr * src; + + /* Basic description of image --- filled in by jpeg_read_header(). */ + /* Application may inspect these values to decide how to process image. */ + + JDIMENSION image_width; /* nominal image width (from SOF marker) */ + JDIMENSION image_height; /* nominal image height */ + int num_components; /* # of color components in JPEG image */ + J_COLOR_SPACE jpeg_color_space; /* colorspace of JPEG image */ + + /* Decompression processing parameters --- these fields must be set before + * calling jpeg_start_decompress(). Note that jpeg_read_header() initializes + * them to default values. + */ + + J_COLOR_SPACE out_color_space; /* colorspace for output */ + + unsigned int scale_num, scale_denom; /* fraction by which to scale image */ + + double output_gamma; /* image gamma wanted in output */ + + boolean buffered_image; /* TRUE=multiple output passes */ + boolean raw_data_out; /* TRUE=downsampled data wanted */ + + J_DCT_METHOD dct_method; /* IDCT algorithm selector */ + boolean do_fancy_upsampling; /* TRUE=apply fancy upsampling */ + boolean do_block_smoothing; /* TRUE=apply interblock smoothing */ + + boolean quantize_colors; /* TRUE=colormapped output wanted */ + /* the following are ignored if not quantize_colors: */ + J_DITHER_MODE dither_mode; /* type of color dithering to use */ + boolean two_pass_quantize; /* TRUE=use two-pass color quantization */ + int desired_number_of_colors; /* max # colors to use in created colormap */ + /* these are significant only in buffered-image mode: */ + boolean enable_1pass_quant; /* enable future use of 1-pass quantizer */ + boolean enable_external_quant;/* enable future use of external colormap */ + boolean enable_2pass_quant; /* enable future use of 2-pass quantizer */ + + /* Description of actual output image that will be returned to application. + * These fields are computed by jpeg_start_decompress(). + * You can also use jpeg_calc_output_dimensions() to determine these values + * in advance of calling jpeg_start_decompress(). + */ + + JDIMENSION output_width; /* scaled image width */ + JDIMENSION output_height; /* scaled image height */ + int out_color_components; /* # of color components in out_color_space */ + int output_components; /* # of color components returned */ + /* output_components is 1 (a colormap index) when quantizing colors; + * otherwise it equals out_color_components. + */ + int rec_outbuf_height; /* min recommended height of scanline buffer */ + /* If the buffer passed to jpeg_read_scanlines() is less than this many rows + * high, space and time will be wasted due to unnecessary data copying. + * Usually rec_outbuf_height will be 1 or 2, at most 4. + */ + + /* When quantizing colors, the output colormap is described by these fields. + * The application can supply a colormap by setting colormap non-NULL before + * calling jpeg_start_decompress; otherwise a colormap is created during + * jpeg_start_decompress or jpeg_start_output. + * The map has out_color_components rows and actual_number_of_colors columns. + */ + int actual_number_of_colors; /* number of entries in use */ + JSAMPARRAY colormap; /* The color map as a 2-D pixel array */ + + /* State variables: these variables indicate the progress of decompression. + * The application may examine these but must not modify them. + */ + + /* Row index of next scanline to be read from jpeg_read_scanlines(). + * Application may use this to control its processing loop, e.g., + * "while (output_scanline < output_height)". + */ + JDIMENSION output_scanline; /* 0 .. output_height-1 */ + + /* Current input scan number and number of iMCU rows completed in scan. + * These indicate the progress of the decompressor input side. + */ + int input_scan_number; /* Number of SOS markers seen so far */ + JDIMENSION input_iMCU_row; /* Number of iMCU rows completed */ + + /* The "output scan number" is the notional scan being displayed by the + * output side. The decompressor will not allow output scan/row number + * to get ahead of input scan/row, but it can fall arbitrarily far behind. + */ + int output_scan_number; /* Nominal scan number being displayed */ + JDIMENSION output_iMCU_row; /* Number of iMCU rows read */ + + /* Current progression status. coef_bits[c][i] indicates the precision + * with which component c's DCT coefficient i (in zigzag order) is known. + * It is -1 when no data has yet been received, otherwise it is the point + * transform (shift) value for the most recent scan of the coefficient + * (thus, 0 at completion of the progression). + * This pointer is NULL when reading a non-progressive file. + */ + int (*coef_bits)[DCTSIZE2]; /* -1 or current Al value for each coef */ + + /* Internal JPEG parameters --- the application usually need not look at + * these fields. Note that the decompressor output side may not use + * any parameters that can change between scans. + */ + + /* Quantization and Huffman tables are carried forward across input + * datastreams when processing abbreviated JPEG datastreams. + */ + + JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS]; + /* ptrs to coefficient quantization tables, or NULL if not defined */ + + JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS]; + JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS]; + /* ptrs to Huffman coding tables, or NULL if not defined */ + + /* These parameters are never carried across datastreams, since they + * are given in SOF/SOS markers or defined to be reset by SOI. + */ + + int data_precision; /* bits of precision in image data */ + + jpeg_component_info * comp_info; + /* comp_info[i] describes component that appears i'th in SOF */ + + boolean is_baseline; /* TRUE if Baseline SOF0 encountered */ + boolean progressive_mode; /* TRUE if SOFn specifies progressive mode */ + boolean arith_code; /* TRUE=arithmetic coding, FALSE=Huffman */ + + UINT8 arith_dc_L[NUM_ARITH_TBLS]; /* L values for DC arith-coding tables */ + UINT8 arith_dc_U[NUM_ARITH_TBLS]; /* U values for DC arith-coding tables */ + UINT8 arith_ac_K[NUM_ARITH_TBLS]; /* Kx values for AC arith-coding tables */ + + unsigned int restart_interval; /* MCUs per restart interval, or 0 for no restart */ + + /* These fields record data obtained from optional markers recognized by + * the JPEG library. + */ + boolean saw_JFIF_marker; /* TRUE iff a JFIF APP0 marker was found */ + /* Data copied from JFIF marker; only valid if saw_JFIF_marker is TRUE: */ + UINT8 JFIF_major_version; /* JFIF version number */ + UINT8 JFIF_minor_version; + UINT8 density_unit; /* JFIF code for pixel size units */ + UINT16 X_density; /* Horizontal pixel density */ + UINT16 Y_density; /* Vertical pixel density */ + boolean saw_Adobe_marker; /* TRUE iff an Adobe APP14 marker was found */ + UINT8 Adobe_transform; /* Color transform code from Adobe marker */ + + boolean CCIR601_sampling; /* TRUE=first samples are cosited */ + + /* Aside from the specific data retained from APPn markers known to the + * library, the uninterpreted contents of any or all APPn and COM markers + * can be saved in a list for examination by the application. + */ + jpeg_saved_marker_ptr marker_list; /* Head of list of saved markers */ + + /* Remaining fields are known throughout decompressor, but generally + * should not be touched by a surrounding application. + */ + + /* + * These fields are computed during decompression startup + */ + int max_h_samp_factor; /* largest h_samp_factor */ + int max_v_samp_factor; /* largest v_samp_factor */ + + int min_DCT_h_scaled_size; /* smallest DCT_h_scaled_size of any component */ + int min_DCT_v_scaled_size; /* smallest DCT_v_scaled_size of any component */ + + JDIMENSION total_iMCU_rows; /* # of iMCU rows in image */ + /* The coefficient controller's input and output progress is measured in + * units of "iMCU" (interleaved MCU) rows. These are the same as MCU rows + * in fully interleaved JPEG scans, but are used whether the scan is + * interleaved or not. We define an iMCU row as v_samp_factor DCT block + * rows of each component. Therefore, the IDCT output contains + * v_samp_factor*DCT_v_scaled_size sample rows of a component per iMCU row. + */ + + JSAMPLE * sample_range_limit; /* table for fast range-limiting */ + + /* + * These fields are valid during any one scan. + * They describe the components and MCUs actually appearing in the scan. + * Note that the decompressor output side must not use these fields. + */ + int comps_in_scan; /* # of JPEG components in this scan */ + jpeg_component_info * cur_comp_info[MAX_COMPS_IN_SCAN]; + /* *cur_comp_info[i] describes component that appears i'th in SOS */ + + JDIMENSION MCUs_per_row; /* # of MCUs across the image */ + JDIMENSION MCU_rows_in_scan; /* # of MCU rows in the image */ + + int blocks_in_MCU; /* # of DCT blocks per MCU */ + int MCU_membership[D_MAX_BLOCKS_IN_MCU]; + /* MCU_membership[i] is index in cur_comp_info of component owning */ + /* i'th block in an MCU */ + + int Ss, Se, Ah, Al; /* progressive JPEG parameters for scan */ + + /* These fields are derived from Se of first SOS marker. + */ + int block_size; /* the basic DCT block size: 1..16 */ + const int * natural_order; /* natural-order position array for entropy decode */ + int lim_Se; /* min( Se, DCTSIZE2-1 ) for entropy decode */ + + /* This field is shared between entropy decoder and marker parser. + * It is either zero or the code of a JPEG marker that has been + * read from the data source, but has not yet been processed. + */ + int unread_marker; + + /* + * Links to decompression subobjects (methods, private variables of modules) + */ + struct jpeg_decomp_master * master; + struct jpeg_d_main_controller * main; + struct jpeg_d_coef_controller * coef; + struct jpeg_d_post_controller * post; + struct jpeg_input_controller * inputctl; + struct jpeg_marker_reader * marker; + struct jpeg_entropy_decoder * entropy; + struct jpeg_inverse_dct * idct; + struct jpeg_upsampler * upsample; + struct jpeg_color_deconverter * cconvert; + struct jpeg_color_quantizer * cquantize; +}; + + +/* "Object" declarations for JPEG modules that may be supplied or called + * directly by the surrounding application. + * As with all objects in the JPEG library, these structs only define the + * publicly visible methods and state variables of a module. Additional + * private fields may exist after the public ones. + */ + + +/* Error handler object */ + +struct jpeg_error_mgr { + /* Error exit handler: does not return to caller */ + JMETHOD(void, error_exit, (j_common_ptr cinfo)); + /* Conditionally emit a trace or warning message */ + JMETHOD(void, emit_message, (j_common_ptr cinfo, int msg_level)); + /* Routine that actually outputs a trace or error message */ + JMETHOD(void, output_message, (j_common_ptr cinfo)); + /* Format a message string for the most recent JPEG error or message */ + JMETHOD(void, format_message, (j_common_ptr cinfo, char * buffer)); +#define JMSG_LENGTH_MAX 200 /* recommended size of format_message buffer */ + /* Reset error state variables at start of a new image */ + JMETHOD(void, reset_error_mgr, (j_common_ptr cinfo)); + + /* The message ID code and any parameters are saved here. + * A message can have one string parameter or up to 8 int parameters. + */ + int msg_code; +#define JMSG_STR_PARM_MAX 80 + union { + int i[8]; + char s[JMSG_STR_PARM_MAX]; + } msg_parm; + + /* Standard state variables for error facility */ + + int trace_level; /* max msg_level that will be displayed */ + + /* For recoverable corrupt-data errors, we emit a warning message, + * but keep going unless emit_message chooses to abort. emit_message + * should count warnings in num_warnings. The surrounding application + * can check for bad data by seeing if num_warnings is nonzero at the + * end of processing. + */ + long num_warnings; /* number of corrupt-data warnings */ + + /* These fields point to the table(s) of error message strings. + * An application can change the table pointer to switch to a different + * message list (typically, to change the language in which errors are + * reported). Some applications may wish to add additional error codes + * that will be handled by the JPEG library error mechanism; the second + * table pointer is used for this purpose. + * + * First table includes all errors generated by JPEG library itself. + * Error code 0 is reserved for a "no such error string" message. + */ + const char * const * jpeg_message_table; /* Library errors */ + int last_jpeg_message; /* Table contains strings 0..last_jpeg_message */ + /* Second table can be added by application (see cjpeg/djpeg for example). + * It contains strings numbered first_addon_message..last_addon_message. + */ + const char * const * addon_message_table; /* Non-library errors */ + int first_addon_message; /* code for first string in addon table */ + int last_addon_message; /* code for last string in addon table */ +}; + + +/* Progress monitor object */ + +struct jpeg_progress_mgr { + JMETHOD(void, progress_monitor, (j_common_ptr cinfo)); + + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +}; + + +/* Data destination object for compression */ + +struct jpeg_destination_mgr { + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + + JMETHOD(void, init_destination, (j_compress_ptr cinfo)); + JMETHOD(boolean, empty_output_buffer, (j_compress_ptr cinfo)); + JMETHOD(void, term_destination, (j_compress_ptr cinfo)); +}; + + +/* Data source object for decompression */ + +struct jpeg_source_mgr { + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + + JMETHOD(void, init_source, (j_decompress_ptr cinfo)); + JMETHOD(boolean, fill_input_buffer, (j_decompress_ptr cinfo)); + JMETHOD(void, skip_input_data, (j_decompress_ptr cinfo, long num_bytes)); + JMETHOD(boolean, resync_to_restart, (j_decompress_ptr cinfo, int desired)); + JMETHOD(void, term_source, (j_decompress_ptr cinfo)); +}; + + +/* Memory manager object. + * Allocates "small" objects (a few K total), "large" objects (tens of K), + * and "really big" objects (virtual arrays with backing store if needed). + * The memory manager does not allow individual objects to be freed; rather, + * each created object is assigned to a pool, and whole pools can be freed + * at once. This is faster and more convenient than remembering exactly what + * to free, especially where malloc()/free() are not too speedy. + * NB: alloc routines never return NULL. They exit to error_exit if not + * successful. + */ + +#define JPOOL_PERMANENT 0 /* lasts until master record is destroyed */ +#define JPOOL_IMAGE 1 /* lasts until done with image/datastream */ +#define JPOOL_NUMPOOLS 2 + +typedef struct jvirt_sarray_control * jvirt_sarray_ptr; +typedef struct jvirt_barray_control * jvirt_barray_ptr; + + +struct jpeg_memory_mgr { + /* Method pointers */ + JMETHOD(void *, alloc_small, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(void FAR *, alloc_large, (j_common_ptr cinfo, int pool_id, + size_t sizeofobject)); + JMETHOD(JSAMPARRAY, alloc_sarray, (j_common_ptr cinfo, int pool_id, + JDIMENSION samplesperrow, + JDIMENSION numrows)); + JMETHOD(JBLOCKARRAY, alloc_barray, (j_common_ptr cinfo, int pool_id, + JDIMENSION blocksperrow, + JDIMENSION numrows)); + JMETHOD(jvirt_sarray_ptr, request_virt_sarray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION samplesperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(jvirt_barray_ptr, request_virt_barray, (j_common_ptr cinfo, + int pool_id, + boolean pre_zero, + JDIMENSION blocksperrow, + JDIMENSION numrows, + JDIMENSION maxaccess)); + JMETHOD(void, realize_virt_arrays, (j_common_ptr cinfo)); + JMETHOD(JSAMPARRAY, access_virt_sarray, (j_common_ptr cinfo, + jvirt_sarray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(JBLOCKARRAY, access_virt_barray, (j_common_ptr cinfo, + jvirt_barray_ptr ptr, + JDIMENSION start_row, + JDIMENSION num_rows, + boolean writable)); + JMETHOD(void, free_pool, (j_common_ptr cinfo, int pool_id)); + JMETHOD(void, self_destruct, (j_common_ptr cinfo)); + + /* Limit on memory allocation for this JPEG object. (Note that this is + * merely advisory, not a guaranteed maximum; it only affects the space + * used for virtual-array buffers.) May be changed by outer application + * after creating the JPEG object. + */ + long max_memory_to_use; + + /* Maximum allocation request accepted by alloc_large. */ + long max_alloc_chunk; +}; + + +/* Routine signature for application-supplied marker processing methods. + * Need not pass marker code since it is stored in cinfo->unread_marker. + */ +typedef JMETHOD(boolean, jpeg_marker_parser_method, (j_decompress_ptr cinfo)); + + +/* Declarations for routines called by application. + * The JPP macro hides prototype parameters from compilers that can't cope. + * Note JPP requires double parentheses. + */ + +#ifdef HAVE_PROTOTYPES +#define JPP(arglist) arglist +#else +#define JPP(arglist) () +#endif + + +/* Short forms of external names for systems with brain-damaged linkers. + * We shorten external names to be unique in the first six letters, which + * is good enough for all known systems. + * (If your compiler itself needs names to be unique in less than 15 + * characters, you are out of luck. Get a better compiler.) + */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jpeg_std_error jStdError +#define jpeg_CreateCompress jCreaCompress +#define jpeg_CreateDecompress jCreaDecompress +#define jpeg_destroy_compress jDestCompress +#define jpeg_destroy_decompress jDestDecompress +#define jpeg_stdio_dest jStdDest +#define jpeg_stdio_src jStdSrc +#define jpeg_mem_dest jMemDest +#define jpeg_mem_src jMemSrc +#define jpeg_set_defaults jSetDefaults +#define jpeg_set_colorspace jSetColorspace +#define jpeg_default_colorspace jDefColorspace +#define jpeg_set_quality jSetQuality +#define jpeg_set_linear_quality jSetLQuality +#define jpeg_default_qtables jDefQTables +#define jpeg_add_quant_table jAddQuantTable +#define jpeg_quality_scaling jQualityScaling +#define jpeg_simple_progression jSimProgress +#define jpeg_suppress_tables jSuppressTables +#define jpeg_alloc_quant_table jAlcQTable +#define jpeg_alloc_huff_table jAlcHTable +#define jpeg_start_compress jStrtCompress +#define jpeg_write_scanlines jWrtScanlines +#define jpeg_finish_compress jFinCompress +#define jpeg_calc_jpeg_dimensions jCjpegDimensions +#define jpeg_write_raw_data jWrtRawData +#define jpeg_write_marker jWrtMarker +#define jpeg_write_m_header jWrtMHeader +#define jpeg_write_m_byte jWrtMByte +#define jpeg_write_tables jWrtTables +#define jpeg_read_header jReadHeader +#define jpeg_start_decompress jStrtDecompress +#define jpeg_read_scanlines jReadScanlines +#define jpeg_finish_decompress jFinDecompress +#define jpeg_read_raw_data jReadRawData +#define jpeg_has_multiple_scans jHasMultScn +#define jpeg_start_output jStrtOutput +#define jpeg_finish_output jFinOutput +#define jpeg_input_complete jInComplete +#define jpeg_new_colormap jNewCMap +#define jpeg_consume_input jConsumeInput +#define jpeg_core_output_dimensions jCoreDimensions +#define jpeg_calc_output_dimensions jCalcDimensions +#define jpeg_save_markers jSaveMarkers +#define jpeg_set_marker_processor jSetMarker +#define jpeg_read_coefficients jReadCoefs +#define jpeg_write_coefficients jWrtCoefs +#define jpeg_copy_critical_parameters jCopyCrit +#define jpeg_abort_compress jAbrtCompress +#define jpeg_abort_decompress jAbrtDecompress +#define jpeg_abort jAbort +#define jpeg_destroy jDestroy +#define jpeg_resync_to_restart jResyncRestart +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* Default error-management setup */ +EXTERN(struct jpeg_error_mgr *) jpeg_std_error + JPP((struct jpeg_error_mgr * err)); + +/* Initialization of JPEG compression objects. + * jpeg_create_compress() and jpeg_create_decompress() are the exported + * names that applications should call. These expand to calls on + * jpeg_CreateCompress and jpeg_CreateDecompress with additional information + * passed for version mismatch checking. + * NB: you must set up the error-manager BEFORE calling jpeg_create_xxx. + */ +#define jpeg_create_compress(cinfo) \ + jpeg_CreateCompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_compress_struct)) +#define jpeg_create_decompress(cinfo) \ + jpeg_CreateDecompress((cinfo), JPEG_LIB_VERSION, \ + (size_t) sizeof(struct jpeg_decompress_struct)) +EXTERN(void) jpeg_CreateCompress JPP((j_compress_ptr cinfo, + int version, size_t structsize)); +EXTERN(void) jpeg_CreateDecompress JPP((j_decompress_ptr cinfo, + int version, size_t structsize)); +/* Destruction of JPEG compression objects */ +EXTERN(void) jpeg_destroy_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_destroy_decompress JPP((j_decompress_ptr cinfo)); + +/* Standard data source and destination managers: stdio streams. */ +/* Caller is responsible for opening the file before and closing after. */ +EXTERN(void) jpeg_stdio_dest JPP((j_compress_ptr cinfo, FILE * outfile)); +EXTERN(void) jpeg_stdio_src JPP((j_decompress_ptr cinfo, FILE * infile)); + +/* Data source and destination managers: memory buffers. */ +EXTERN(void) jpeg_mem_dest JPP((j_compress_ptr cinfo, + unsigned char ** outbuffer, + unsigned long * outsize)); +EXTERN(void) jpeg_mem_src JPP((j_decompress_ptr cinfo, + unsigned char * inbuffer, + unsigned long insize)); + +/* Default parameter setup for compression */ +EXTERN(void) jpeg_set_defaults JPP((j_compress_ptr cinfo)); +/* Compression parameter setup aids */ +EXTERN(void) jpeg_set_colorspace JPP((j_compress_ptr cinfo, + J_COLOR_SPACE colorspace)); +EXTERN(void) jpeg_default_colorspace JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_set_quality JPP((j_compress_ptr cinfo, int quality, + boolean force_baseline)); +EXTERN(void) jpeg_set_linear_quality JPP((j_compress_ptr cinfo, + int scale_factor, + boolean force_baseline)); +EXTERN(void) jpeg_default_qtables JPP((j_compress_ptr cinfo, + boolean force_baseline)); +EXTERN(void) jpeg_add_quant_table JPP((j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, + boolean force_baseline)); +EXTERN(int) jpeg_quality_scaling JPP((int quality)); +EXTERN(void) jpeg_simple_progression JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_suppress_tables JPP((j_compress_ptr cinfo, + boolean suppress)); +EXTERN(JQUANT_TBL *) jpeg_alloc_quant_table JPP((j_common_ptr cinfo)); +EXTERN(JHUFF_TBL *) jpeg_alloc_huff_table JPP((j_common_ptr cinfo)); + +/* Main entry points for compression */ +EXTERN(void) jpeg_start_compress JPP((j_compress_ptr cinfo, + boolean write_all_tables)); +EXTERN(JDIMENSION) jpeg_write_scanlines JPP((j_compress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION num_lines)); +EXTERN(void) jpeg_finish_compress JPP((j_compress_ptr cinfo)); + +/* Precalculate JPEG dimensions for current compression parameters. */ +EXTERN(void) jpeg_calc_jpeg_dimensions JPP((j_compress_ptr cinfo)); + +/* Replaces jpeg_write_scanlines when writing raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_write_raw_data JPP((j_compress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION num_lines)); + +/* Write a special marker. See libjpeg.txt concerning safe usage. */ +EXTERN(void) jpeg_write_marker + JPP((j_compress_ptr cinfo, int marker, + const JOCTET * dataptr, unsigned int datalen)); +/* Same, but piecemeal. */ +EXTERN(void) jpeg_write_m_header + JPP((j_compress_ptr cinfo, int marker, unsigned int datalen)); +EXTERN(void) jpeg_write_m_byte + JPP((j_compress_ptr cinfo, int val)); + +/* Alternate compression function: just write an abbreviated table file */ +EXTERN(void) jpeg_write_tables JPP((j_compress_ptr cinfo)); + +/* Decompression startup: read start of JPEG datastream to see what's there */ +EXTERN(int) jpeg_read_header JPP((j_decompress_ptr cinfo, + boolean require_image)); +/* Return value is one of: */ +#define JPEG_SUSPENDED 0 /* Suspended due to lack of input data */ +#define JPEG_HEADER_OK 1 /* Found valid image datastream */ +#define JPEG_HEADER_TABLES_ONLY 2 /* Found valid table-specs-only datastream */ +/* If you pass require_image = TRUE (normal case), you need not check for + * a TABLES_ONLY return code; an abbreviated file will cause an error exit. + * JPEG_SUSPENDED is only possible if you use a data source module that can + * give a suspension return (the stdio source module doesn't). + */ + +/* Main entry points for decompression */ +EXTERN(boolean) jpeg_start_decompress JPP((j_decompress_ptr cinfo)); +EXTERN(JDIMENSION) jpeg_read_scanlines JPP((j_decompress_ptr cinfo, + JSAMPARRAY scanlines, + JDIMENSION max_lines)); +EXTERN(boolean) jpeg_finish_decompress JPP((j_decompress_ptr cinfo)); + +/* Replaces jpeg_read_scanlines when reading raw downsampled data. */ +EXTERN(JDIMENSION) jpeg_read_raw_data JPP((j_decompress_ptr cinfo, + JSAMPIMAGE data, + JDIMENSION max_lines)); + +/* Additional entry points for buffered-image mode. */ +EXTERN(boolean) jpeg_has_multiple_scans JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_start_output JPP((j_decompress_ptr cinfo, + int scan_number)); +EXTERN(boolean) jpeg_finish_output JPP((j_decompress_ptr cinfo)); +EXTERN(boolean) jpeg_input_complete JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_new_colormap JPP((j_decompress_ptr cinfo)); +EXTERN(int) jpeg_consume_input JPP((j_decompress_ptr cinfo)); +/* Return value is one of: */ +/* #define JPEG_SUSPENDED 0 Suspended due to lack of input data */ +#define JPEG_REACHED_SOS 1 /* Reached start of new scan */ +#define JPEG_REACHED_EOI 2 /* Reached end of image */ +#define JPEG_ROW_COMPLETED 3 /* Completed one iMCU row */ +#define JPEG_SCAN_COMPLETED 4 /* Completed last iMCU row of a scan */ + +/* Precalculate output dimensions for current decompression parameters. */ +EXTERN(void) jpeg_core_output_dimensions JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_calc_output_dimensions JPP((j_decompress_ptr cinfo)); + +/* Control saving of COM and APPn markers into marker_list. */ +EXTERN(void) jpeg_save_markers + JPP((j_decompress_ptr cinfo, int marker_code, + unsigned int length_limit)); + +/* Install a special processing method for COM or APPn markers. */ +EXTERN(void) jpeg_set_marker_processor + JPP((j_decompress_ptr cinfo, int marker_code, + jpeg_marker_parser_method routine)); + +/* Read or write raw DCT coefficients --- useful for lossless transcoding. */ +EXTERN(jvirt_barray_ptr *) jpeg_read_coefficients JPP((j_decompress_ptr cinfo)); +EXTERN(void) jpeg_write_coefficients JPP((j_compress_ptr cinfo, + jvirt_barray_ptr * coef_arrays)); +EXTERN(void) jpeg_copy_critical_parameters JPP((j_decompress_ptr srcinfo, + j_compress_ptr dstinfo)); + +/* If you choose to abort compression or decompression before completing + * jpeg_finish_(de)compress, then you need to clean up to release memory, + * temporary files, etc. You can just call jpeg_destroy_(de)compress + * if you're done with the JPEG object, but if you want to clean it up and + * reuse it, call this: + */ +EXTERN(void) jpeg_abort_compress JPP((j_compress_ptr cinfo)); +EXTERN(void) jpeg_abort_decompress JPP((j_decompress_ptr cinfo)); + +/* Generic versions of jpeg_abort and jpeg_destroy that work on either + * flavor of JPEG object. These may be more convenient in some places. + */ +EXTERN(void) jpeg_abort JPP((j_common_ptr cinfo)); +EXTERN(void) jpeg_destroy JPP((j_common_ptr cinfo)); + +/* Default restart-marker-resync procedure for use by data source modules */ +EXTERN(boolean) jpeg_resync_to_restart JPP((j_decompress_ptr cinfo, + int desired)); + + +/* These marker codes are exported since applications and data source modules + * are likely to want to use them. + */ + +#define JPEG_RST0 0xD0 /* RST0 marker code */ +#define JPEG_EOI 0xD9 /* EOI marker code */ +#define JPEG_APP0 0xE0 /* APP0 marker code */ +#define JPEG_COM 0xFE /* COM marker code */ + + +/* If we have a brain-damaged compiler that emits warnings (or worse, errors) + * for structure definitions that are never filled in, keep it quiet by + * supplying dummy definitions for the various substructures. + */ + +#ifdef INCOMPLETE_TYPES_BROKEN +#ifndef JPEG_INTERNALS /* will be defined in jpegint.h */ +struct jvirt_sarray_control { long dummy; }; +struct jvirt_barray_control { long dummy; }; +struct jpeg_comp_master { long dummy; }; +struct jpeg_c_main_controller { long dummy; }; +struct jpeg_c_prep_controller { long dummy; }; +struct jpeg_c_coef_controller { long dummy; }; +struct jpeg_marker_writer { long dummy; }; +struct jpeg_color_converter { long dummy; }; +struct jpeg_downsampler { long dummy; }; +struct jpeg_forward_dct { long dummy; }; +struct jpeg_entropy_encoder { long dummy; }; +struct jpeg_decomp_master { long dummy; }; +struct jpeg_d_main_controller { long dummy; }; +struct jpeg_d_coef_controller { long dummy; }; +struct jpeg_d_post_controller { long dummy; }; +struct jpeg_input_controller { long dummy; }; +struct jpeg_marker_reader { long dummy; }; +struct jpeg_entropy_decoder { long dummy; }; +struct jpeg_inverse_dct { long dummy; }; +struct jpeg_upsampler { long dummy; }; +struct jpeg_color_deconverter { long dummy; }; +struct jpeg_color_quantizer { long dummy; }; +#endif /* JPEG_INTERNALS */ +#endif /* INCOMPLETE_TYPES_BROKEN */ + + +/* + * The JPEG library modules define JPEG_INTERNALS before including this file. + * The internal structure declarations are read only when that is true. + * Applications using the library should not include jpegint.h, but may wish + * to include jerror.h. + */ + +#ifdef JPEG_INTERNALS +#include "jpegint.h" /* fetch private declarations */ +#include "jerror.h" /* fetch error codes too */ +#endif + +#ifdef __cplusplus +#ifndef DONT_USE_EXTERN_C +} +#endif +#endif + +#endif /* JPEGLIB_H */ diff --git a/src/3rdparty/libjpeg/jpegtran.1 b/src/3rdparty/libjpeg/jpegtran.1 new file mode 100644 index 0000000..0ad1bbc --- /dev/null +++ b/src/3rdparty/libjpeg/jpegtran.1 @@ -0,0 +1,285 @@ +.TH JPEGTRAN 1 "28 December 2009" +.SH NAME +jpegtran \- lossless transformation of JPEG files +.SH SYNOPSIS +.B jpegtran +[ +.I options +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B jpegtran +performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. +.PP +.B jpegtran +works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +.B djpeg +followed by +.B cjpeg +to accomplish the same conversion. But by the same token, +.B jpegtran +cannot perform lossy operations such as changing the image quality. +.PP +.B jpegtran +reads the named JPEG/JFIF file, or the standard input if no file is +named, and produces a JPEG/JFIF file on the standard output. +.SH OPTIONS +All switch names may be abbreviated; for example, +.B \-optimize +may be written +.B \-opt +or +.BR \-o . +Upper and lower case are equivalent. +British spellings are also accepted (e.g., +.BR \-optimise ), +though for brevity these are not mentioned below. +.PP +To specify the coded JPEG representation used in the output file, +.B jpegtran +accepts a subset of the switches recognized by +.BR cjpeg : +.TP +.B \-optimize +Perform optimization of entropy encoding parameters. +.TP +.B \-progressive +Create progressive JPEG file. +.TP +.BI \-restart " N" +Emit a JPEG restart marker every N MCU rows, or every N MCU blocks if "B" is +attached to the number. +.TP +.B \-arithmetic +Use arithmetic coding. +.TP +.BI \-scans " file" +Use the scan script given in the specified text file. +.PP +See +.BR cjpeg (1) +for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. +.PP +The image can be losslessly transformed by giving one of these switches: +.TP +.B \-flip horizontal +Mirror image horizontally (left-right). +.TP +.B \-flip vertical +Mirror image vertically (top-bottom). +.TP +.B \-rotate 90 +Rotate image 90 degrees clockwise. +.TP +.B \-rotate 180 +Rotate image 180 degrees. +.TP +.B \-rotate 270 +Rotate image 270 degrees clockwise (or 90 ccw). +.TP +.B \-transpose +Transpose image (across UL-to-LR axis). +.TP +.B \-transverse +Transverse transpose (across UR-to-LL axis). +.IP +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. +.IP +.BR jpegtran 's +default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. +.IP +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the +.B \-trim +switch: +.TP +.B \-trim +Drop non-transformable edge blocks. +.IP +Obviously, a transformation with +.B \-trim +is not reversible, so strictly speaking +.B jpegtran +with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +.B \-rot 270 -trim +trims only the bottom edge, but +.B \-rot 90 -trim +followed by +.B \-rot 180 -trim +trims both edges. +.IP +If you are only interested in perfect transformation, add the +.B \-perfect +switch: +.TP +.B \-perfect +Fails with an error if the transformation is not perfect. +.IP +For example you may want to do +.IP +.B (jpegtran \-rot 90 -perfect +.I foo.jpg +.B || djpeg +.I foo.jpg +.B | pnmflip \-r90 | cjpeg) +.IP +to do a perfect rotation if available or an approximated one if not. +.PP +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the region +dimensions to keep the lower right crop corner unchanged. (Thus, the output +image covers at least the requested region, but may cover more.) + +The image can be losslessly cropped by giving the switch: +.TP +.B \-crop WxH+X+Y +Crop to a rectangular subarea of width W, height H starting at point X,Y. +.PP +Other not-strictly-lossless transformation switches are: +.TP +.B \-grayscale +Force grayscale output. +.IP +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) +.TP +.BI \-scale " M/N" +Scale the output image by a factor M/N. +.IP +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. +.B Caution: +An implementation of the JPEG SmartScale extension is required for this +feature. SmartScale enabled JPEG is not yet widely implemented, so many +decoders will be unable to view a SmartScale extended JPEG file at all. +.PP +.B jpegtran +also recognizes these switches that control what to do with "extra" markers, +such as comment blocks: +.TP +.B \-copy none +Copy no extra markers from source file. This setting suppresses all +comments and other excess baggage present in the source file. +.TP +.B \-copy comments +Copy only comment markers. This setting copies comments from the source file, +but discards any other inessential (for image display) data. +.TP +.B \-copy all +Copy all extra markers. This setting preserves miscellaneous markers +found in the source file, such as JFIF thumbnails, Exif data, and Photoshop +settings. In some files these extra markers can be sizable. +.IP +The default behavior is +.BR "\-copy comments" . +(Note: in IJG releases v6 and v6a, +.B jpegtran +always did the equivalent of +.BR "\-copy none" .) +.PP +Additional switches recognized by jpegtran are: +.TP +.BI \-maxmemory " N" +Set limit for amount of memory to use in processing large images. Value is +in thousands of bytes, or millions of bytes if "M" is attached to the +number. For example, +.B \-max 4m +selects 4000000 bytes. If more space is needed, temporary files will be used. +.TP +.BI \-outfile " name" +Send output image to the named file, not to standard output. +.TP +.B \-verbose +Enable debug printout. More +.BR \-v 's +give more output. Also, version information is printed at startup. +.TP +.B \-debug +Same as +.BR \-verbose . +.SH EXAMPLES +.LP +This example converts a baseline JPEG file to progressive form: +.IP +.B jpegtran \-progressive +.I foo.jpg +.B > +.I fooprog.jpg +.PP +This example rotates an image 90 degrees clockwise, discarding any +unrotatable edge pixels: +.IP +.B jpegtran \-rot 90 -trim +.I foo.jpg +.B > +.I foo90.jpg +.SH ENVIRONMENT +.TP +.B JPEGMEM +If this environment variable is set, its value is the default memory limit. +The value is specified as described for the +.B \-maxmemory +switch. +.B JPEGMEM +overrides the default value specified when the program was compiled, and +itself is overridden by an explicit +.BR \-maxmemory . +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR rdjpgcom (1), +.BR wrjpgcom (1) +.br +Wallace, Gregory K. "The JPEG Still Picture Compression Standard", +Communications of the ACM, April 1991 (vol. 34, no. 4), pp. 30-44. +.SH AUTHOR +Independent JPEG Group +.SH BUGS +The transform options can't transform odd-size images perfectly. Use +.B \-trim +or +.B \-perfect +if you don't like the results. +.PP +The entire image is read into memory and then written out again, even in +cases where this isn't really necessary. Expect swapping on large images, +especially when using the more complex transform options. diff --git a/src/3rdparty/libjpeg/jquant1.c b/src/3rdparty/libjpeg/jquant1.c new file mode 100644 index 0000000..b2f96aa --- /dev/null +++ b/src/3rdparty/libjpeg/jquant1.c @@ -0,0 +1,856 @@ +/* + * jquant1.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains 1-pass color quantization (color mapping) routines. + * These routines provide mapping to a fixed color map using equally spaced + * color values. Optional Floyd-Steinberg or ordered dithering is available. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef QUANT_1PASS_SUPPORTED + + +/* + * The main purpose of 1-pass quantization is to provide a fast, if not very + * high quality, colormapped output capability. A 2-pass quantizer usually + * gives better visual quality; however, for quantized grayscale output this + * quantizer is perfectly adequate. Dithering is highly recommended with this + * quantizer, though you can turn it off if you really want to. + * + * In 1-pass quantization the colormap must be chosen in advance of seeing the + * image. We use a map consisting of all combinations of Ncolors[i] color + * values for the i'th component. The Ncolors[] values are chosen so that + * their product, the total number of colors, is no more than that requested. + * (In most cases, the product will be somewhat less.) + * + * Since the colormap is orthogonal, the representative value for each color + * component can be determined without considering the other components; + * then these indexes can be combined into a colormap index by a standard + * N-dimensional-array-subscript calculation. Most of the arithmetic involved + * can be precalculated and stored in the lookup table colorindex[]. + * colorindex[i][j] maps pixel value j in component i to the nearest + * representative value (grid plane) for that component; this index is + * multiplied by the array stride for component i, so that the + * index of the colormap entry closest to a given pixel value is just + * sum( colorindex[component-number][pixel-component-value] ) + * Aside from being fast, this scheme allows for variable spacing between + * representative values with no additional lookup cost. + * + * If gamma correction has been applied in color conversion, it might be wise + * to adjust the color grid spacing so that the representative colors are + * equidistant in linear space. At this writing, gamma correction is not + * implemented by jdcolor, so nothing is done here. + */ + + +/* Declarations for ordered dithering. + * + * We use a standard 16x16 ordered dither array. The basic concept of ordered + * dithering is described in many references, for instance Dale Schumacher's + * chapter II.2 of Graphics Gems II (James Arvo, ed. Academic Press, 1991). + * In place of Schumacher's comparisons against a "threshold" value, we add a + * "dither" value to the input pixel and then round the result to the nearest + * output value. The dither value is equivalent to (0.5 - threshold) times + * the distance between output values. For ordered dithering, we assume that + * the output colors are equally spaced; if not, results will probably be + * worse, since the dither may be too much or too little at a given point. + * + * The normal calculation would be to form pixel value + dither, range-limit + * this to 0..MAXJSAMPLE, and then index into the colorindex table as usual. + * We can skip the separate range-limiting step by extending the colorindex + * table in both directions. + */ + +#define ODITHER_SIZE 16 /* dimension of dither matrix */ +/* NB: if ODITHER_SIZE is not a power of 2, ODITHER_MASK uses will break */ +#define ODITHER_CELLS (ODITHER_SIZE*ODITHER_SIZE) /* # cells in matrix */ +#define ODITHER_MASK (ODITHER_SIZE-1) /* mask for wrapping around counters */ + +typedef int ODITHER_MATRIX[ODITHER_SIZE][ODITHER_SIZE]; +typedef int (*ODITHER_MATRIX_PTR)[ODITHER_SIZE]; + +static const UINT8 base_dither_matrix[ODITHER_SIZE][ODITHER_SIZE] = { + /* Bayer's order-4 dither array. Generated by the code given in + * Stephen Hawley's article "Ordered Dithering" in Graphics Gems I. + * The values in this array must range from 0 to ODITHER_CELLS-1. + */ + { 0,192, 48,240, 12,204, 60,252, 3,195, 51,243, 15,207, 63,255 }, + { 128, 64,176,112,140, 76,188,124,131, 67,179,115,143, 79,191,127 }, + { 32,224, 16,208, 44,236, 28,220, 35,227, 19,211, 47,239, 31,223 }, + { 160, 96,144, 80,172,108,156, 92,163, 99,147, 83,175,111,159, 95 }, + { 8,200, 56,248, 4,196, 52,244, 11,203, 59,251, 7,199, 55,247 }, + { 136, 72,184,120,132, 68,180,116,139, 75,187,123,135, 71,183,119 }, + { 40,232, 24,216, 36,228, 20,212, 43,235, 27,219, 39,231, 23,215 }, + { 168,104,152, 88,164,100,148, 84,171,107,155, 91,167,103,151, 87 }, + { 2,194, 50,242, 14,206, 62,254, 1,193, 49,241, 13,205, 61,253 }, + { 130, 66,178,114,142, 78,190,126,129, 65,177,113,141, 77,189,125 }, + { 34,226, 18,210, 46,238, 30,222, 33,225, 17,209, 45,237, 29,221 }, + { 162, 98,146, 82,174,110,158, 94,161, 97,145, 81,173,109,157, 93 }, + { 10,202, 58,250, 6,198, 54,246, 9,201, 57,249, 5,197, 53,245 }, + { 138, 74,186,122,134, 70,182,118,137, 73,185,121,133, 69,181,117 }, + { 42,234, 26,218, 38,230, 22,214, 41,233, 25,217, 37,229, 21,213 }, + { 170,106,154, 90,166,102,150, 86,169,105,153, 89,165,101,149, 85 } +}; + + +/* Declarations for Floyd-Steinberg dithering. + * + * Errors are accumulated into the array fserrors[], at a resolution of + * 1/16th of a pixel count. The error at a given pixel is propagated + * to its not-yet-processed neighbors using the standard F-S fractions, + * ... (here) 7/16 + * 3/16 5/16 1/16 + * We work left-to-right on even rows, right-to-left on odd rows. + * + * We can get away with a single array (holding one row's worth of errors) + * by using it to store the current row's errors at pixel columns not yet + * processed, but the next row's errors at columns already processed. We + * need only a few extra variables to hold the errors immediately around the + * current column. (If we are lucky, those variables are in registers, but + * even if not, they're probably cheaper to access than array elements are.) + * + * The fserrors[] array is indexed [component#][position]. + * We provide (#columns + 2) entries per component; the extra entry at each + * end saves us from special-casing the first and last pixels. + * + * Note: on a wide image, we might not have enough room in a PC's near data + * segment to hold the error array; so it is allocated with alloc_large. + */ + +#if BITS_IN_JSAMPLE == 8 +typedef INT16 FSERROR; /* 16 bits should be enough */ +typedef int LOCFSERROR; /* use 'int' for calculation temps */ +#else +typedef INT32 FSERROR; /* may need more than 16 bits */ +typedef INT32 LOCFSERROR; /* be sure calculation temps are big enough */ +#endif + +typedef FSERROR FAR *FSERRPTR; /* pointer to error array (in FAR storage!) */ + + +/* Private subobject */ + +#define MAX_Q_COMPS 4 /* max components I can handle */ + +typedef struct { + struct jpeg_color_quantizer pub; /* public fields */ + + /* Initially allocated colormap is saved here */ + JSAMPARRAY sv_colormap; /* The color map as a 2-D pixel array */ + int sv_actual; /* number of entries in use */ + + JSAMPARRAY colorindex; /* Precomputed mapping for speed */ + /* colorindex[i][j] = index of color closest to pixel value j in component i, + * premultiplied as described above. Since colormap indexes must fit into + * JSAMPLEs, the entries of this array will too. + */ + boolean is_padded; /* is the colorindex padded for odither? */ + + int Ncolors[MAX_Q_COMPS]; /* # of values alloced to each component */ + + /* Variables for ordered dithering */ + int row_index; /* cur row's vertical index in dither matrix */ + ODITHER_MATRIX_PTR odither[MAX_Q_COMPS]; /* one dither array per component */ + + /* Variables for Floyd-Steinberg dithering */ + FSERRPTR fserrors[MAX_Q_COMPS]; /* accumulated errors */ + boolean on_odd_row; /* flag to remember which row we are on */ +} my_cquantizer; + +typedef my_cquantizer * my_cquantize_ptr; + + +/* + * Policy-making subroutines for create_colormap and create_colorindex. + * These routines determine the colormap to be used. The rest of the module + * only assumes that the colormap is orthogonal. + * + * * select_ncolors decides how to divvy up the available colors + * among the components. + * * output_value defines the set of representative values for a component. + * * largest_input_value defines the mapping from input values to + * representative values for a component. + * Note that the latter two routines may impose different policies for + * different components, though this is not currently done. + */ + + +LOCAL(int) +select_ncolors (j_decompress_ptr cinfo, int Ncolors[]) +/* Determine allocation of desired colors to components, */ +/* and fill in Ncolors[] array to indicate choice. */ +/* Return value is total number of colors (product of Ncolors[] values). */ +{ + int nc = cinfo->out_color_components; /* number of color components */ + int max_colors = cinfo->desired_number_of_colors; + int total_colors, iroot, i, j; + boolean changed; + long temp; + static const int RGB_order[3] = { RGB_GREEN, RGB_RED, RGB_BLUE }; + + /* We can allocate at least the nc'th root of max_colors per component. */ + /* Compute floor(nc'th root of max_colors). */ + iroot = 1; + do { + iroot++; + temp = iroot; /* set temp = iroot ** nc */ + for (i = 1; i < nc; i++) + temp *= iroot; + } while (temp <= (long) max_colors); /* repeat till iroot exceeds root */ + iroot--; /* now iroot = floor(root) */ + + /* Must have at least 2 color values per component */ + if (iroot < 2) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, (int) temp); + + /* Initialize to iroot color values for each component */ + total_colors = 1; + for (i = 0; i < nc; i++) { + Ncolors[i] = iroot; + total_colors *= iroot; + } + /* We may be able to increment the count for one or more components without + * exceeding max_colors, though we know not all can be incremented. + * Sometimes, the first component can be incremented more than once! + * (Example: for 16 colors, we start at 2*2*2, go to 3*2*2, then 4*2*2.) + * In RGB colorspace, try to increment G first, then R, then B. + */ + do { + changed = FALSE; + for (i = 0; i < nc; i++) { + j = (cinfo->out_color_space == JCS_RGB ? RGB_order[i] : i); + /* calculate new total_colors if Ncolors[j] is incremented */ + temp = total_colors / Ncolors[j]; + temp *= Ncolors[j]+1; /* done in long arith to avoid oflo */ + if (temp > (long) max_colors) + break; /* won't fit, done with this pass */ + Ncolors[j]++; /* OK, apply the increment */ + total_colors = (int) temp; + changed = TRUE; + } + } while (changed); + + return total_colors; +} + + +LOCAL(int) +output_value (j_decompress_ptr cinfo, int ci, int j, int maxj) +/* Return j'th output value, where j will range from 0 to maxj */ +/* The output values must fall in 0..MAXJSAMPLE in increasing order */ +{ + /* We always provide values 0 and MAXJSAMPLE for each component; + * any additional values are equally spaced between these limits. + * (Forcing the upper and lower values to the limits ensures that + * dithering can't produce a color outside the selected gamut.) + */ + return (int) (((INT32) j * MAXJSAMPLE + maxj/2) / maxj); +} + + +LOCAL(int) +largest_input_value (j_decompress_ptr cinfo, int ci, int j, int maxj) +/* Return largest input value that should map to j'th output value */ +/* Must have largest(j=0) >= 0, and largest(j=maxj) >= MAXJSAMPLE */ +{ + /* Breakpoints are halfway between values returned by output_value */ + return (int) (((INT32) (2*j + 1) * MAXJSAMPLE + maxj) / (2*maxj)); +} + + +/* + * Create the colormap. + */ + +LOCAL(void) +create_colormap (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPARRAY colormap; /* Created colormap */ + int total_colors; /* Number of distinct output colors */ + int i,j,k, nci, blksize, blkdist, ptr, val; + + /* Select number of colors for each component */ + total_colors = select_ncolors(cinfo, cquantize->Ncolors); + + /* Report selected color counts */ + if (cinfo->out_color_components == 3) + TRACEMS4(cinfo, 1, JTRC_QUANT_3_NCOLORS, + total_colors, cquantize->Ncolors[0], + cquantize->Ncolors[1], cquantize->Ncolors[2]); + else + TRACEMS1(cinfo, 1, JTRC_QUANT_NCOLORS, total_colors); + + /* Allocate and fill in the colormap. */ + /* The colors are ordered in the map in standard row-major order, */ + /* i.e. rightmost (highest-indexed) color changes most rapidly. */ + + colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) total_colors, (JDIMENSION) cinfo->out_color_components); + + /* blksize is number of adjacent repeated entries for a component */ + /* blkdist is distance between groups of identical entries for a component */ + blkdist = total_colors; + + for (i = 0; i < cinfo->out_color_components; i++) { + /* fill in colormap entries for i'th color component */ + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + blksize = blkdist / nci; + for (j = 0; j < nci; j++) { + /* Compute j'th output value (out of nci) for component */ + val = output_value(cinfo, i, j, nci-1); + /* Fill in all colormap entries that have this value of this component */ + for (ptr = j * blksize; ptr < total_colors; ptr += blkdist) { + /* fill in blksize entries beginning at ptr */ + for (k = 0; k < blksize; k++) + colormap[i][ptr+k] = (JSAMPLE) val; + } + } + blkdist = blksize; /* blksize of this color is blkdist of next */ + } + + /* Save the colormap in private storage, + * where it will survive color quantization mode changes. + */ + cquantize->sv_colormap = colormap; + cquantize->sv_actual = total_colors; +} + + +/* + * Create the color index table. + */ + +LOCAL(void) +create_colorindex (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPROW indexptr; + int i,j,k, nci, blksize, val, pad; + + /* For ordered dither, we pad the color index tables by MAXJSAMPLE in + * each direction (input index values can be -MAXJSAMPLE .. 2*MAXJSAMPLE). + * This is not necessary in the other dithering modes. However, we + * flag whether it was done in case user changes dithering mode. + */ + if (cinfo->dither_mode == JDITHER_ORDERED) { + pad = MAXJSAMPLE*2; + cquantize->is_padded = TRUE; + } else { + pad = 0; + cquantize->is_padded = FALSE; + } + + cquantize->colorindex = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (JDIMENSION) (MAXJSAMPLE+1 + pad), + (JDIMENSION) cinfo->out_color_components); + + /* blksize is number of adjacent repeated entries for a component */ + blksize = cquantize->sv_actual; + + for (i = 0; i < cinfo->out_color_components; i++) { + /* fill in colorindex entries for i'th color component */ + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + blksize = blksize / nci; + + /* adjust colorindex pointers to provide padding at negative indexes. */ + if (pad) + cquantize->colorindex[i] += MAXJSAMPLE; + + /* in loop, val = index of current output value, */ + /* and k = largest j that maps to current val */ + indexptr = cquantize->colorindex[i]; + val = 0; + k = largest_input_value(cinfo, i, 0, nci-1); + for (j = 0; j <= MAXJSAMPLE; j++) { + while (j > k) /* advance val if past boundary */ + k = largest_input_value(cinfo, i, ++val, nci-1); + /* premultiply so that no multiplication needed in main processing */ + indexptr[j] = (JSAMPLE) (val * blksize); + } + /* Pad at both ends if necessary */ + if (pad) + for (j = 1; j <= MAXJSAMPLE; j++) { + indexptr[-j] = indexptr[0]; + indexptr[MAXJSAMPLE+j] = indexptr[MAXJSAMPLE]; + } + } +} + + +/* + * Create an ordered-dither array for a component having ncolors + * distinct output values. + */ + +LOCAL(ODITHER_MATRIX_PTR) +make_odither_array (j_decompress_ptr cinfo, int ncolors) +{ + ODITHER_MATRIX_PTR odither; + int j,k; + INT32 num,den; + + odither = (ODITHER_MATRIX_PTR) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(ODITHER_MATRIX)); + /* The inter-value distance for this color is MAXJSAMPLE/(ncolors-1). + * Hence the dither value for the matrix cell with fill order f + * (f=0..N-1) should be (N-1-2*f)/(2*N) * MAXJSAMPLE/(ncolors-1). + * On 16-bit-int machine, be careful to avoid overflow. + */ + den = 2 * ODITHER_CELLS * ((INT32) (ncolors - 1)); + for (j = 0; j < ODITHER_SIZE; j++) { + for (k = 0; k < ODITHER_SIZE; k++) { + num = ((INT32) (ODITHER_CELLS-1 - 2*((int)base_dither_matrix[j][k]))) + * MAXJSAMPLE; + /* Ensure round towards zero despite C's lack of consistency + * about rounding negative values in integer division... + */ + odither[j][k] = (int) (num<0 ? -((-num)/den) : num/den); + } + } + return odither; +} + + +/* + * Create the ordered-dither tables. + * Components having the same number of representative colors may + * share a dither table. + */ + +LOCAL(void) +create_odither_tables (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + ODITHER_MATRIX_PTR odither; + int i, j, nci; + + for (i = 0; i < cinfo->out_color_components; i++) { + nci = cquantize->Ncolors[i]; /* # of distinct values for this color */ + odither = NULL; /* search for matching prior component */ + for (j = 0; j < i; j++) { + if (nci == cquantize->Ncolors[j]) { + odither = cquantize->odither[j]; + break; + } + } + if (odither == NULL) /* need a new table? */ + odither = make_odither_array(cinfo, nci); + cquantize->odither[i] = odither; + } +} + + +/* + * Map some rows of pixels to the output colormapped representation. + */ + +METHODDEF(void) +color_quantize (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + JSAMPARRAY colorindex = cquantize->colorindex; + register int pixcode, ci; + register JSAMPROW ptrin, ptrout; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + register int nc = cinfo->out_color_components; + + for (row = 0; row < num_rows; row++) { + ptrin = input_buf[row]; + ptrout = output_buf[row]; + for (col = width; col > 0; col--) { + pixcode = 0; + for (ci = 0; ci < nc; ci++) { + pixcode += GETJSAMPLE(colorindex[ci][GETJSAMPLE(*ptrin++)]); + } + *ptrout++ = (JSAMPLE) pixcode; + } + } +} + + +METHODDEF(void) +color_quantize3 (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* Fast path for out_color_components==3, no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register int pixcode; + register JSAMPROW ptrin, ptrout; + JSAMPROW colorindex0 = cquantize->colorindex[0]; + JSAMPROW colorindex1 = cquantize->colorindex[1]; + JSAMPROW colorindex2 = cquantize->colorindex[2]; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + ptrin = input_buf[row]; + ptrout = output_buf[row]; + for (col = width; col > 0; col--) { + pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*ptrin++)]); + pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*ptrin++)]); + pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*ptrin++)]); + *ptrout++ = (JSAMPLE) pixcode; + } + } +} + + +METHODDEF(void) +quantize_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, with ordered dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex_ci; + int * dither; /* points to active row of dither matrix */ + int row_index, col_index; /* current indexes into dither matrix */ + int nc = cinfo->out_color_components; + int ci; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + /* Initialize output values to 0 so can process components separately */ + jzero_far((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); + row_index = cquantize->row_index; + for (ci = 0; ci < nc; ci++) { + input_ptr = input_buf[row] + ci; + output_ptr = output_buf[row]; + colorindex_ci = cquantize->colorindex[ci]; + dither = cquantize->odither[ci][row_index]; + col_index = 0; + + for (col = width; col > 0; col--) { + /* Form pixel value + dither, range-limit to 0..MAXJSAMPLE, + * select output value, accumulate into output code for this pixel. + * Range-limiting need not be done explicitly, as we have extended + * the colorindex table to produce the right answers for out-of-range + * inputs. The maximum dither is +- MAXJSAMPLE; this sets the + * required amount of padding. + */ + *output_ptr += colorindex_ci[GETJSAMPLE(*input_ptr)+dither[col_index]]; + input_ptr += nc; + output_ptr++; + col_index = (col_index + 1) & ODITHER_MASK; + } + } + /* Advance row index for next row */ + row_index = (row_index + 1) & ODITHER_MASK; + cquantize->row_index = row_index; + } +} + + +METHODDEF(void) +quantize3_ord_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* Fast path for out_color_components==3, with ordered dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register int pixcode; + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex0 = cquantize->colorindex[0]; + JSAMPROW colorindex1 = cquantize->colorindex[1]; + JSAMPROW colorindex2 = cquantize->colorindex[2]; + int * dither0; /* points to active row of dither matrix */ + int * dither1; + int * dither2; + int row_index, col_index; /* current indexes into dither matrix */ + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + row_index = cquantize->row_index; + input_ptr = input_buf[row]; + output_ptr = output_buf[row]; + dither0 = cquantize->odither[0][row_index]; + dither1 = cquantize->odither[1][row_index]; + dither2 = cquantize->odither[2][row_index]; + col_index = 0; + + for (col = width; col > 0; col--) { + pixcode = GETJSAMPLE(colorindex0[GETJSAMPLE(*input_ptr++) + + dither0[col_index]]); + pixcode += GETJSAMPLE(colorindex1[GETJSAMPLE(*input_ptr++) + + dither1[col_index]]); + pixcode += GETJSAMPLE(colorindex2[GETJSAMPLE(*input_ptr++) + + dither2[col_index]]); + *output_ptr++ = (JSAMPLE) pixcode; + col_index = (col_index + 1) & ODITHER_MASK; + } + row_index = (row_index + 1) & ODITHER_MASK; + cquantize->row_index = row_index; + } +} + + +METHODDEF(void) +quantize_fs_dither (j_decompress_ptr cinfo, JSAMPARRAY input_buf, + JSAMPARRAY output_buf, int num_rows) +/* General case, with Floyd-Steinberg dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + register LOCFSERROR cur; /* current error or pixel value */ + LOCFSERROR belowerr; /* error for pixel below cur */ + LOCFSERROR bpreverr; /* error for below/prev col */ + LOCFSERROR bnexterr; /* error for below/next col */ + LOCFSERROR delta; + register FSERRPTR errorptr; /* => fserrors[] at column before current */ + register JSAMPROW input_ptr; + register JSAMPROW output_ptr; + JSAMPROW colorindex_ci; + JSAMPROW colormap_ci; + int pixcode; + int nc = cinfo->out_color_components; + int dir; /* 1 for left-to-right, -1 for right-to-left */ + int dirnc; /* dir * nc */ + int ci; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + JSAMPLE *range_limit = cinfo->sample_range_limit; + SHIFT_TEMPS + + for (row = 0; row < num_rows; row++) { + /* Initialize output values to 0 so can process components separately */ + jzero_far((void FAR *) output_buf[row], + (size_t) (width * SIZEOF(JSAMPLE))); + for (ci = 0; ci < nc; ci++) { + input_ptr = input_buf[row] + ci; + output_ptr = output_buf[row]; + if (cquantize->on_odd_row) { + /* work right to left in this row */ + input_ptr += (width-1) * nc; /* so point to rightmost pixel */ + output_ptr += width-1; + dir = -1; + dirnc = -nc; + errorptr = cquantize->fserrors[ci] + (width+1); /* => entry after last column */ + } else { + /* work left to right in this row */ + dir = 1; + dirnc = nc; + errorptr = cquantize->fserrors[ci]; /* => entry before first column */ + } + colorindex_ci = cquantize->colorindex[ci]; + colormap_ci = cquantize->sv_colormap[ci]; + /* Preset error values: no error propagated to first pixel from left */ + cur = 0; + /* and no error propagated to row below yet */ + belowerr = bpreverr = 0; + + for (col = width; col > 0; col--) { + /* cur holds the error propagated from the previous pixel on the + * current line. Add the error propagated from the previous line + * to form the complete error correction term for this pixel, and + * round the error term (which is expressed * 16) to an integer. + * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct + * for either sign of the error value. + * Note: errorptr points to *previous* column's array entry. + */ + cur = RIGHT_SHIFT(cur + errorptr[dir] + 8, 4); + /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. + * The maximum error is +- MAXJSAMPLE; this sets the required size + * of the range_limit array. + */ + cur += GETJSAMPLE(*input_ptr); + cur = GETJSAMPLE(range_limit[cur]); + /* Select output value, accumulate into output code for this pixel */ + pixcode = GETJSAMPLE(colorindex_ci[cur]); + *output_ptr += (JSAMPLE) pixcode; + /* Compute actual representation error at this pixel */ + /* Note: we can do this even though we don't have the final */ + /* pixel code, because the colormap is orthogonal. */ + cur -= GETJSAMPLE(colormap_ci[pixcode]); + /* Compute error fractions to be propagated to adjacent pixels. + * Add these into the running sums, and simultaneously shift the + * next-line error sums left by 1 column. + */ + bnexterr = cur; + delta = cur * 2; + cur += delta; /* form error * 3 */ + errorptr[0] = (FSERROR) (bpreverr + cur); + cur += delta; /* form error * 5 */ + bpreverr = belowerr + cur; + belowerr = bnexterr; + cur += delta; /* form error * 7 */ + /* At this point cur contains the 7/16 error value to be propagated + * to the next pixel on the current line, and all the errors for the + * next line have been shifted over. We are therefore ready to move on. + */ + input_ptr += dirnc; /* advance input ptr to next column */ + output_ptr += dir; /* advance output ptr to next column */ + errorptr += dir; /* advance errorptr to current column */ + } + /* Post-loop cleanup: we must unload the final error value into the + * final fserrors[] entry. Note we need not unload belowerr because + * it is for the dummy column before or after the actual array. + */ + errorptr[0] = (FSERROR) bpreverr; /* unload prev err into array */ + } + cquantize->on_odd_row = (cquantize->on_odd_row ? FALSE : TRUE); + } +} + + +/* + * Allocate workspace for Floyd-Steinberg errors. + */ + +LOCAL(void) +alloc_fs_workspace (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + size_t arraysize; + int i; + + arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); + for (i = 0; i < cinfo->out_color_components; i++) { + cquantize->fserrors[i] = (FSERRPTR) + (*cinfo->mem->alloc_large)((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); + } +} + + +/* + * Initialize for one-pass color quantization. + */ + +METHODDEF(void) +start_pass_1_quant (j_decompress_ptr cinfo, boolean is_pre_scan) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + size_t arraysize; + int i; + + /* Install my colormap. */ + cinfo->colormap = cquantize->sv_colormap; + cinfo->actual_number_of_colors = cquantize->sv_actual; + + /* Initialize for desired dithering mode. */ + switch (cinfo->dither_mode) { + case JDITHER_NONE: + if (cinfo->out_color_components == 3) + cquantize->pub.color_quantize = color_quantize3; + else + cquantize->pub.color_quantize = color_quantize; + break; + case JDITHER_ORDERED: + if (cinfo->out_color_components == 3) + cquantize->pub.color_quantize = quantize3_ord_dither; + else + cquantize->pub.color_quantize = quantize_ord_dither; + cquantize->row_index = 0; /* initialize state for ordered dither */ + /* If user changed to ordered dither from another mode, + * we must recreate the color index table with padding. + * This will cost extra space, but probably isn't very likely. + */ + if (! cquantize->is_padded) + create_colorindex(cinfo); + /* Create ordered-dither tables if we didn't already. */ + if (cquantize->odither[0] == NULL) + create_odither_tables(cinfo); + break; + case JDITHER_FS: + cquantize->pub.color_quantize = quantize_fs_dither; + cquantize->on_odd_row = FALSE; /* initialize state for F-S dither */ + /* Allocate Floyd-Steinberg workspace if didn't already. */ + if (cquantize->fserrors[0] == NULL) + alloc_fs_workspace(cinfo); + /* Initialize the propagated errors to zero. */ + arraysize = (size_t) ((cinfo->output_width + 2) * SIZEOF(FSERROR)); + for (i = 0; i < cinfo->out_color_components; i++) + jzero_far((void FAR *) cquantize->fserrors[i], arraysize); + break; + default: + ERREXIT(cinfo, JERR_NOT_COMPILED); + break; + } +} + + +/* + * Finish up at the end of the pass. + */ + +METHODDEF(void) +finish_pass_1_quant (j_decompress_ptr cinfo) +{ + /* no work in 1-pass case */ +} + + +/* + * Switch to a new external colormap between output passes. + * Shouldn't get to this module! + */ + +METHODDEF(void) +new_color_map_1_quant (j_decompress_ptr cinfo) +{ + ERREXIT(cinfo, JERR_MODE_CHANGE); +} + + +/* + * Module initialization routine for 1-pass color quantization. + */ + +GLOBAL(void) +jinit_1pass_quantizer (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize; + + cquantize = (my_cquantize_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_cquantizer)); + cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; + cquantize->pub.start_pass = start_pass_1_quant; + cquantize->pub.finish_pass = finish_pass_1_quant; + cquantize->pub.new_color_map = new_color_map_1_quant; + cquantize->fserrors[0] = NULL; /* Flag FS workspace not allocated */ + cquantize->odither[0] = NULL; /* Also flag odither arrays not allocated */ + + /* Make sure my internal arrays won't overflow */ + if (cinfo->out_color_components > MAX_Q_COMPS) + ERREXIT1(cinfo, JERR_QUANT_COMPONENTS, MAX_Q_COMPS); + /* Make sure colormap indexes can be represented by JSAMPLEs */ + if (cinfo->desired_number_of_colors > (MAXJSAMPLE+1)) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXJSAMPLE+1); + + /* Create the colormap and color index table. */ + create_colormap(cinfo); + create_colorindex(cinfo); + + /* Allocate Floyd-Steinberg workspace now if requested. + * We do this now since it is FAR storage and may affect the memory + * manager's space calculations. If the user changes to FS dither + * mode in a later pass, we will allocate the space then, and will + * possibly overrun the max_memory_to_use setting. + */ + if (cinfo->dither_mode == JDITHER_FS) + alloc_fs_workspace(cinfo); +} + +#endif /* QUANT_1PASS_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jquant2.c b/src/3rdparty/libjpeg/jquant2.c new file mode 100644 index 0000000..af601e3 --- /dev/null +++ b/src/3rdparty/libjpeg/jquant2.c @@ -0,0 +1,1310 @@ +/* + * jquant2.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains 2-pass color quantization (color mapping) routines. + * These routines provide selection of a custom color map for an image, + * followed by mapping of the image to that color map, with optional + * Floyd-Steinberg dithering. + * It is also possible to use just the second pass to map to an arbitrary + * externally-given color map. + * + * Note: ordered dithering is not supported, since there isn't any fast + * way to compute intercolor distances; it's unclear that ordered dither's + * fundamental assumptions even hold with an irregularly spaced color map. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + +#ifdef QUANT_2PASS_SUPPORTED + + +/* + * This module implements the well-known Heckbert paradigm for color + * quantization. Most of the ideas used here can be traced back to + * Heckbert's seminal paper + * Heckbert, Paul. "Color Image Quantization for Frame Buffer Display", + * Proc. SIGGRAPH '82, Computer Graphics v.16 #3 (July 1982), pp 297-304. + * + * In the first pass over the image, we accumulate a histogram showing the + * usage count of each possible color. To keep the histogram to a reasonable + * size, we reduce the precision of the input; typical practice is to retain + * 5 or 6 bits per color, so that 8 or 4 different input values are counted + * in the same histogram cell. + * + * Next, the color-selection step begins with a box representing the whole + * color space, and repeatedly splits the "largest" remaining box until we + * have as many boxes as desired colors. Then the mean color in each + * remaining box becomes one of the possible output colors. + * + * The second pass over the image maps each input pixel to the closest output + * color (optionally after applying a Floyd-Steinberg dithering correction). + * This mapping is logically trivial, but making it go fast enough requires + * considerable care. + * + * Heckbert-style quantizers vary a good deal in their policies for choosing + * the "largest" box and deciding where to cut it. The particular policies + * used here have proved out well in experimental comparisons, but better ones + * may yet be found. + * + * In earlier versions of the IJG code, this module quantized in YCbCr color + * space, processing the raw upsampled data without a color conversion step. + * This allowed the color conversion math to be done only once per colormap + * entry, not once per pixel. However, that optimization precluded other + * useful optimizations (such as merging color conversion with upsampling) + * and it also interfered with desired capabilities such as quantizing to an + * externally-supplied colormap. We have therefore abandoned that approach. + * The present code works in the post-conversion color space, typically RGB. + * + * To improve the visual quality of the results, we actually work in scaled + * RGB space, giving G distances more weight than R, and R in turn more than + * B. To do everything in integer math, we must use integer scale factors. + * The 2/3/1 scale factors used here correspond loosely to the relative + * weights of the colors in the NTSC grayscale equation. + * If you want to use this code to quantize a non-RGB color space, you'll + * probably need to change these scale factors. + */ + +#define R_SCALE 2 /* scale R distances by this much */ +#define G_SCALE 3 /* scale G distances by this much */ +#define B_SCALE 1 /* and B by this much */ + +/* Relabel R/G/B as components 0/1/2, respecting the RGB ordering defined + * in jmorecfg.h. As the code stands, it will do the right thing for R,G,B + * and B,G,R orders. If you define some other weird order in jmorecfg.h, + * you'll get compile errors until you extend this logic. In that case + * you'll probably want to tweak the histogram sizes too. + */ + +#if RGB_RED == 0 +#define C0_SCALE R_SCALE +#endif +#if RGB_BLUE == 0 +#define C0_SCALE B_SCALE +#endif +#if RGB_GREEN == 1 +#define C1_SCALE G_SCALE +#endif +#if RGB_RED == 2 +#define C2_SCALE R_SCALE +#endif +#if RGB_BLUE == 2 +#define C2_SCALE B_SCALE +#endif + + +/* + * First we have the histogram data structure and routines for creating it. + * + * The number of bits of precision can be adjusted by changing these symbols. + * We recommend keeping 6 bits for G and 5 each for R and B. + * If you have plenty of memory and cycles, 6 bits all around gives marginally + * better results; if you are short of memory, 5 bits all around will save + * some space but degrade the results. + * To maintain a fully accurate histogram, we'd need to allocate a "long" + * (preferably unsigned long) for each cell. In practice this is overkill; + * we can get by with 16 bits per cell. Few of the cell counts will overflow, + * and clamping those that do overflow to the maximum value will give close- + * enough results. This reduces the recommended histogram size from 256Kb + * to 128Kb, which is a useful savings on PC-class machines. + * (In the second pass the histogram space is re-used for pixel mapping data; + * in that capacity, each cell must be able to store zero to the number of + * desired colors. 16 bits/cell is plenty for that too.) + * Since the JPEG code is intended to run in small memory model on 80x86 + * machines, we can't just allocate the histogram in one chunk. Instead + * of a true 3-D array, we use a row of pointers to 2-D arrays. Each + * pointer corresponds to a C0 value (typically 2^5 = 32 pointers) and + * each 2-D array has 2^6*2^5 = 2048 or 2^6*2^6 = 4096 entries. Note that + * on 80x86 machines, the pointer row is in near memory but the actual + * arrays are in far memory (same arrangement as we use for image arrays). + */ + +#define MAXNUMCOLORS (MAXJSAMPLE+1) /* maximum size of colormap */ + +/* These will do the right thing for either R,G,B or B,G,R color order, + * but you may not like the results for other color orders. + */ +#define HIST_C0_BITS 5 /* bits of precision in R/B histogram */ +#define HIST_C1_BITS 6 /* bits of precision in G histogram */ +#define HIST_C2_BITS 5 /* bits of precision in B/R histogram */ + +/* Number of elements along histogram axes. */ +#define HIST_C0_ELEMS (1<cquantize; + register JSAMPROW ptr; + register histptr histp; + register hist3d histogram = cquantize->histogram; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + ptr = input_buf[row]; + for (col = width; col > 0; col--) { + /* get pixel value and index into the histogram */ + histp = & histogram[GETJSAMPLE(ptr[0]) >> C0_SHIFT] + [GETJSAMPLE(ptr[1]) >> C1_SHIFT] + [GETJSAMPLE(ptr[2]) >> C2_SHIFT]; + /* increment, check for overflow and undo increment if so. */ + if (++(*histp) <= 0) + (*histp)--; + ptr += 3; + } + } +} + + +/* + * Next we have the really interesting routines: selection of a colormap + * given the completed histogram. + * These routines work with a list of "boxes", each representing a rectangular + * subset of the input color space (to histogram precision). + */ + +typedef struct { + /* The bounds of the box (inclusive); expressed as histogram indexes */ + int c0min, c0max; + int c1min, c1max; + int c2min, c2max; + /* The volume (actually 2-norm) of the box */ + INT32 volume; + /* The number of nonzero histogram cells within this box */ + long colorcount; +} box; + +typedef box * boxptr; + + +LOCAL(boxptr) +find_biggest_color_pop (boxptr boxlist, int numboxes) +/* Find the splittable box with the largest color population */ +/* Returns NULL if no splittable boxes remain */ +{ + register boxptr boxp; + register int i; + register long maxc = 0; + boxptr which = NULL; + + for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { + if (boxp->colorcount > maxc && boxp->volume > 0) { + which = boxp; + maxc = boxp->colorcount; + } + } + return which; +} + + +LOCAL(boxptr) +find_biggest_volume (boxptr boxlist, int numboxes) +/* Find the splittable box with the largest (scaled) volume */ +/* Returns NULL if no splittable boxes remain */ +{ + register boxptr boxp; + register int i; + register INT32 maxv = 0; + boxptr which = NULL; + + for (i = 0, boxp = boxlist; i < numboxes; i++, boxp++) { + if (boxp->volume > maxv) { + which = boxp; + maxv = boxp->volume; + } + } + return which; +} + + +LOCAL(void) +update_box (j_decompress_ptr cinfo, boxptr boxp) +/* Shrink the min/max bounds of a box to enclose only nonzero elements, */ +/* and recompute its volume and population */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + histptr histp; + int c0,c1,c2; + int c0min,c0max,c1min,c1max,c2min,c2max; + INT32 dist0,dist1,dist2; + long ccount; + + c0min = boxp->c0min; c0max = boxp->c0max; + c1min = boxp->c1min; c1max = boxp->c1max; + c2min = boxp->c2min; c2max = boxp->c2max; + + if (c0max > c0min) + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c0min = c0min = c0; + goto have_c0min; + } + } + have_c0min: + if (c0max > c0min) + for (c0 = c0max; c0 >= c0min; c0--) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c0max = c0max = c0; + goto have_c0max; + } + } + have_c0max: + if (c1max > c1min) + for (c1 = c1min; c1 <= c1max; c1++) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c1min = c1min = c1; + goto have_c1min; + } + } + have_c1min: + if (c1max > c1min) + for (c1 = c1max; c1 >= c1min; c1--) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) + if (*histp++ != 0) { + boxp->c1max = c1max = c1; + goto have_c1max; + } + } + have_c1max: + if (c2max > c2min) + for (c2 = c2min; c2 <= c2max; c2++) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1min][c2]; + for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) + if (*histp != 0) { + boxp->c2min = c2min = c2; + goto have_c2min; + } + } + have_c2min: + if (c2max > c2min) + for (c2 = c2max; c2 >= c2min; c2--) + for (c0 = c0min; c0 <= c0max; c0++) { + histp = & histogram[c0][c1min][c2]; + for (c1 = c1min; c1 <= c1max; c1++, histp += HIST_C2_ELEMS) + if (*histp != 0) { + boxp->c2max = c2max = c2; + goto have_c2max; + } + } + have_c2max: + + /* Update box volume. + * We use 2-norm rather than real volume here; this biases the method + * against making long narrow boxes, and it has the side benefit that + * a box is splittable iff norm > 0. + * Since the differences are expressed in histogram-cell units, + * we have to shift back to JSAMPLE units to get consistent distances; + * after which, we scale according to the selected distance scale factors. + */ + dist0 = ((c0max - c0min) << C0_SHIFT) * C0_SCALE; + dist1 = ((c1max - c1min) << C1_SHIFT) * C1_SCALE; + dist2 = ((c2max - c2min) << C2_SHIFT) * C2_SCALE; + boxp->volume = dist0*dist0 + dist1*dist1 + dist2*dist2; + + /* Now scan remaining volume of box and compute population */ + ccount = 0; + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++, histp++) + if (*histp != 0) { + ccount++; + } + } + boxp->colorcount = ccount; +} + + +LOCAL(int) +median_cut (j_decompress_ptr cinfo, boxptr boxlist, int numboxes, + int desired_colors) +/* Repeatedly select and split the largest box until we have enough boxes */ +{ + int n,lb; + int c0,c1,c2,cmax; + register boxptr b1,b2; + + while (numboxes < desired_colors) { + /* Select box to split. + * Current algorithm: by population for first half, then by volume. + */ + if (numboxes*2 <= desired_colors) { + b1 = find_biggest_color_pop(boxlist, numboxes); + } else { + b1 = find_biggest_volume(boxlist, numboxes); + } + if (b1 == NULL) /* no splittable boxes left! */ + break; + b2 = &boxlist[numboxes]; /* where new box will go */ + /* Copy the color bounds to the new box. */ + b2->c0max = b1->c0max; b2->c1max = b1->c1max; b2->c2max = b1->c2max; + b2->c0min = b1->c0min; b2->c1min = b1->c1min; b2->c2min = b1->c2min; + /* Choose which axis to split the box on. + * Current algorithm: longest scaled axis. + * See notes in update_box about scaling distances. + */ + c0 = ((b1->c0max - b1->c0min) << C0_SHIFT) * C0_SCALE; + c1 = ((b1->c1max - b1->c1min) << C1_SHIFT) * C1_SCALE; + c2 = ((b1->c2max - b1->c2min) << C2_SHIFT) * C2_SCALE; + /* We want to break any ties in favor of green, then red, blue last. + * This code does the right thing for R,G,B or B,G,R color orders only. + */ +#if RGB_RED == 0 + cmax = c1; n = 1; + if (c0 > cmax) { cmax = c0; n = 0; } + if (c2 > cmax) { n = 2; } +#else + cmax = c1; n = 1; + if (c2 > cmax) { cmax = c2; n = 2; } + if (c0 > cmax) { n = 0; } +#endif + /* Choose split point along selected axis, and update box bounds. + * Current algorithm: split at halfway point. + * (Since the box has been shrunk to minimum volume, + * any split will produce two nonempty subboxes.) + * Note that lb value is max for lower box, so must be < old max. + */ + switch (n) { + case 0: + lb = (b1->c0max + b1->c0min) / 2; + b1->c0max = lb; + b2->c0min = lb+1; + break; + case 1: + lb = (b1->c1max + b1->c1min) / 2; + b1->c1max = lb; + b2->c1min = lb+1; + break; + case 2: + lb = (b1->c2max + b1->c2min) / 2; + b1->c2max = lb; + b2->c2min = lb+1; + break; + } + /* Update stats for boxes */ + update_box(cinfo, b1); + update_box(cinfo, b2); + numboxes++; + } + return numboxes; +} + + +LOCAL(void) +compute_color (j_decompress_ptr cinfo, boxptr boxp, int icolor) +/* Compute representative color for a box, put it in colormap[icolor] */ +{ + /* Current algorithm: mean weighted by pixels (not colors) */ + /* Note it is important to get the rounding correct! */ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + histptr histp; + int c0,c1,c2; + int c0min,c0max,c1min,c1max,c2min,c2max; + long count; + long total = 0; + long c0total = 0; + long c1total = 0; + long c2total = 0; + + c0min = boxp->c0min; c0max = boxp->c0max; + c1min = boxp->c1min; c1max = boxp->c1max; + c2min = boxp->c2min; c2max = boxp->c2max; + + for (c0 = c0min; c0 <= c0max; c0++) + for (c1 = c1min; c1 <= c1max; c1++) { + histp = & histogram[c0][c1][c2min]; + for (c2 = c2min; c2 <= c2max; c2++) { + if ((count = *histp++) != 0) { + total += count; + c0total += ((c0 << C0_SHIFT) + ((1<>1)) * count; + c1total += ((c1 << C1_SHIFT) + ((1<>1)) * count; + c2total += ((c2 << C2_SHIFT) + ((1<>1)) * count; + } + } + } + + cinfo->colormap[0][icolor] = (JSAMPLE) ((c0total + (total>>1)) / total); + cinfo->colormap[1][icolor] = (JSAMPLE) ((c1total + (total>>1)) / total); + cinfo->colormap[2][icolor] = (JSAMPLE) ((c2total + (total>>1)) / total); +} + + +LOCAL(void) +select_colors (j_decompress_ptr cinfo, int desired_colors) +/* Master routine for color selection */ +{ + boxptr boxlist; + int numboxes; + int i; + + /* Allocate workspace for box list */ + boxlist = (boxptr) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, desired_colors * SIZEOF(box)); + /* Initialize one box containing whole space */ + numboxes = 1; + boxlist[0].c0min = 0; + boxlist[0].c0max = MAXJSAMPLE >> C0_SHIFT; + boxlist[0].c1min = 0; + boxlist[0].c1max = MAXJSAMPLE >> C1_SHIFT; + boxlist[0].c2min = 0; + boxlist[0].c2max = MAXJSAMPLE >> C2_SHIFT; + /* Shrink it to actually-used volume and set its statistics */ + update_box(cinfo, & boxlist[0]); + /* Perform median-cut to produce final box list */ + numboxes = median_cut(cinfo, boxlist, numboxes, desired_colors); + /* Compute the representative color for each box, fill colormap */ + for (i = 0; i < numboxes; i++) + compute_color(cinfo, & boxlist[i], i); + cinfo->actual_number_of_colors = numboxes; + TRACEMS1(cinfo, 1, JTRC_QUANT_SELECTED, numboxes); +} + + +/* + * These routines are concerned with the time-critical task of mapping input + * colors to the nearest color in the selected colormap. + * + * We re-use the histogram space as an "inverse color map", essentially a + * cache for the results of nearest-color searches. All colors within a + * histogram cell will be mapped to the same colormap entry, namely the one + * closest to the cell's center. This may not be quite the closest entry to + * the actual input color, but it's almost as good. A zero in the cache + * indicates we haven't found the nearest color for that cell yet; the array + * is cleared to zeroes before starting the mapping pass. When we find the + * nearest color for a cell, its colormap index plus one is recorded in the + * cache for future use. The pass2 scanning routines call fill_inverse_cmap + * when they need to use an unfilled entry in the cache. + * + * Our method of efficiently finding nearest colors is based on the "locally + * sorted search" idea described by Heckbert and on the incremental distance + * calculation described by Spencer W. Thomas in chapter III.1 of Graphics + * Gems II (James Arvo, ed. Academic Press, 1991). Thomas points out that + * the distances from a given colormap entry to each cell of the histogram can + * be computed quickly using an incremental method: the differences between + * distances to adjacent cells themselves differ by a constant. This allows a + * fairly fast implementation of the "brute force" approach of computing the + * distance from every colormap entry to every histogram cell. Unfortunately, + * it needs a work array to hold the best-distance-so-far for each histogram + * cell (because the inner loop has to be over cells, not colormap entries). + * The work array elements have to be INT32s, so the work array would need + * 256Kb at our recommended precision. This is not feasible in DOS machines. + * + * To get around these problems, we apply Thomas' method to compute the + * nearest colors for only the cells within a small subbox of the histogram. + * The work array need be only as big as the subbox, so the memory usage + * problem is solved. Furthermore, we need not fill subboxes that are never + * referenced in pass2; many images use only part of the color gamut, so a + * fair amount of work is saved. An additional advantage of this + * approach is that we can apply Heckbert's locality criterion to quickly + * eliminate colormap entries that are far away from the subbox; typically + * three-fourths of the colormap entries are rejected by Heckbert's criterion, + * and we need not compute their distances to individual cells in the subbox. + * The speed of this approach is heavily influenced by the subbox size: too + * small means too much overhead, too big loses because Heckbert's criterion + * can't eliminate as many colormap entries. Empirically the best subbox + * size seems to be about 1/512th of the histogram (1/8th in each direction). + * + * Thomas' article also describes a refined method which is asymptotically + * faster than the brute-force method, but it is also far more complex and + * cannot efficiently be applied to small subboxes. It is therefore not + * useful for programs intended to be portable to DOS machines. On machines + * with plenty of memory, filling the whole histogram in one shot with Thomas' + * refined method might be faster than the present code --- but then again, + * it might not be any faster, and it's certainly more complicated. + */ + + +/* log2(histogram cells in update box) for each axis; this can be adjusted */ +#define BOX_C0_LOG (HIST_C0_BITS-3) +#define BOX_C1_LOG (HIST_C1_BITS-3) +#define BOX_C2_LOG (HIST_C2_BITS-3) + +#define BOX_C0_ELEMS (1<actual_number_of_colors; + int maxc0, maxc1, maxc2; + int centerc0, centerc1, centerc2; + int i, x, ncolors; + INT32 minmaxdist, min_dist, max_dist, tdist; + INT32 mindist[MAXNUMCOLORS]; /* min distance to colormap entry i */ + + /* Compute true coordinates of update box's upper corner and center. + * Actually we compute the coordinates of the center of the upper-corner + * histogram cell, which are the upper bounds of the volume we care about. + * Note that since ">>" rounds down, the "center" values may be closer to + * min than to max; hence comparisons to them must be "<=", not "<". + */ + maxc0 = minc0 + ((1 << BOX_C0_SHIFT) - (1 << C0_SHIFT)); + centerc0 = (minc0 + maxc0) >> 1; + maxc1 = minc1 + ((1 << BOX_C1_SHIFT) - (1 << C1_SHIFT)); + centerc1 = (minc1 + maxc1) >> 1; + maxc2 = minc2 + ((1 << BOX_C2_SHIFT) - (1 << C2_SHIFT)); + centerc2 = (minc2 + maxc2) >> 1; + + /* For each color in colormap, find: + * 1. its minimum squared-distance to any point in the update box + * (zero if color is within update box); + * 2. its maximum squared-distance to any point in the update box. + * Both of these can be found by considering only the corners of the box. + * We save the minimum distance for each color in mindist[]; + * only the smallest maximum distance is of interest. + */ + minmaxdist = 0x7FFFFFFFL; + + for (i = 0; i < numcolors; i++) { + /* We compute the squared-c0-distance term, then add in the other two. */ + x = GETJSAMPLE(cinfo->colormap[0][i]); + if (x < minc0) { + tdist = (x - minc0) * C0_SCALE; + min_dist = tdist*tdist; + tdist = (x - maxc0) * C0_SCALE; + max_dist = tdist*tdist; + } else if (x > maxc0) { + tdist = (x - maxc0) * C0_SCALE; + min_dist = tdist*tdist; + tdist = (x - minc0) * C0_SCALE; + max_dist = tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + min_dist = 0; + if (x <= centerc0) { + tdist = (x - maxc0) * C0_SCALE; + max_dist = tdist*tdist; + } else { + tdist = (x - minc0) * C0_SCALE; + max_dist = tdist*tdist; + } + } + + x = GETJSAMPLE(cinfo->colormap[1][i]); + if (x < minc1) { + tdist = (x - minc1) * C1_SCALE; + min_dist += tdist*tdist; + tdist = (x - maxc1) * C1_SCALE; + max_dist += tdist*tdist; + } else if (x > maxc1) { + tdist = (x - maxc1) * C1_SCALE; + min_dist += tdist*tdist; + tdist = (x - minc1) * C1_SCALE; + max_dist += tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + if (x <= centerc1) { + tdist = (x - maxc1) * C1_SCALE; + max_dist += tdist*tdist; + } else { + tdist = (x - minc1) * C1_SCALE; + max_dist += tdist*tdist; + } + } + + x = GETJSAMPLE(cinfo->colormap[2][i]); + if (x < minc2) { + tdist = (x - minc2) * C2_SCALE; + min_dist += tdist*tdist; + tdist = (x - maxc2) * C2_SCALE; + max_dist += tdist*tdist; + } else if (x > maxc2) { + tdist = (x - maxc2) * C2_SCALE; + min_dist += tdist*tdist; + tdist = (x - minc2) * C2_SCALE; + max_dist += tdist*tdist; + } else { + /* within cell range so no contribution to min_dist */ + if (x <= centerc2) { + tdist = (x - maxc2) * C2_SCALE; + max_dist += tdist*tdist; + } else { + tdist = (x - minc2) * C2_SCALE; + max_dist += tdist*tdist; + } + } + + mindist[i] = min_dist; /* save away the results */ + if (max_dist < minmaxdist) + minmaxdist = max_dist; + } + + /* Now we know that no cell in the update box is more than minmaxdist + * away from some colormap entry. Therefore, only colors that are + * within minmaxdist of some part of the box need be considered. + */ + ncolors = 0; + for (i = 0; i < numcolors; i++) { + if (mindist[i] <= minmaxdist) + colorlist[ncolors++] = (JSAMPLE) i; + } + return ncolors; +} + + +LOCAL(void) +find_best_colors (j_decompress_ptr cinfo, int minc0, int minc1, int minc2, + int numcolors, JSAMPLE colorlist[], JSAMPLE bestcolor[]) +/* Find the closest colormap entry for each cell in the update box, + * given the list of candidate colors prepared by find_nearby_colors. + * Return the indexes of the closest entries in the bestcolor[] array. + * This routine uses Thomas' incremental distance calculation method to + * find the distance from a colormap entry to successive cells in the box. + */ +{ + int ic0, ic1, ic2; + int i, icolor; + register INT32 * bptr; /* pointer into bestdist[] array */ + JSAMPLE * cptr; /* pointer into bestcolor[] array */ + INT32 dist0, dist1; /* initial distance values */ + register INT32 dist2; /* current distance in inner loop */ + INT32 xx0, xx1; /* distance increments */ + register INT32 xx2; + INT32 inc0, inc1, inc2; /* initial values for increments */ + /* This array holds the distance to the nearest-so-far color for each cell */ + INT32 bestdist[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + + /* Initialize best-distance for each cell of the update box */ + bptr = bestdist; + for (i = BOX_C0_ELEMS*BOX_C1_ELEMS*BOX_C2_ELEMS-1; i >= 0; i--) + *bptr++ = 0x7FFFFFFFL; + + /* For each color selected by find_nearby_colors, + * compute its distance to the center of each cell in the box. + * If that's less than best-so-far, update best distance and color number. + */ + + /* Nominal steps between cell centers ("x" in Thomas article) */ +#define STEP_C0 ((1 << C0_SHIFT) * C0_SCALE) +#define STEP_C1 ((1 << C1_SHIFT) * C1_SCALE) +#define STEP_C2 ((1 << C2_SHIFT) * C2_SCALE) + + for (i = 0; i < numcolors; i++) { + icolor = GETJSAMPLE(colorlist[i]); + /* Compute (square of) distance from minc0/c1/c2 to this color */ + inc0 = (minc0 - GETJSAMPLE(cinfo->colormap[0][icolor])) * C0_SCALE; + dist0 = inc0*inc0; + inc1 = (minc1 - GETJSAMPLE(cinfo->colormap[1][icolor])) * C1_SCALE; + dist0 += inc1*inc1; + inc2 = (minc2 - GETJSAMPLE(cinfo->colormap[2][icolor])) * C2_SCALE; + dist0 += inc2*inc2; + /* Form the initial difference increments */ + inc0 = inc0 * (2 * STEP_C0) + STEP_C0 * STEP_C0; + inc1 = inc1 * (2 * STEP_C1) + STEP_C1 * STEP_C1; + inc2 = inc2 * (2 * STEP_C2) + STEP_C2 * STEP_C2; + /* Now loop over all cells in box, updating distance per Thomas method */ + bptr = bestdist; + cptr = bestcolor; + xx0 = inc0; + for (ic0 = BOX_C0_ELEMS-1; ic0 >= 0; ic0--) { + dist1 = dist0; + xx1 = inc1; + for (ic1 = BOX_C1_ELEMS-1; ic1 >= 0; ic1--) { + dist2 = dist1; + xx2 = inc2; + for (ic2 = BOX_C2_ELEMS-1; ic2 >= 0; ic2--) { + if (dist2 < *bptr) { + *bptr = dist2; + *cptr = (JSAMPLE) icolor; + } + dist2 += xx2; + xx2 += 2 * STEP_C2 * STEP_C2; + bptr++; + cptr++; + } + dist1 += xx1; + xx1 += 2 * STEP_C1 * STEP_C1; + } + dist0 += xx0; + xx0 += 2 * STEP_C0 * STEP_C0; + } + } +} + + +LOCAL(void) +fill_inverse_cmap (j_decompress_ptr cinfo, int c0, int c1, int c2) +/* Fill the inverse-colormap entries in the update box that contains */ +/* histogram cell c0/c1/c2. (Only that one cell MUST be filled, but */ +/* we can fill as many others as we wish.) */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + int minc0, minc1, minc2; /* lower left corner of update box */ + int ic0, ic1, ic2; + register JSAMPLE * cptr; /* pointer into bestcolor[] array */ + register histptr cachep; /* pointer into main cache array */ + /* This array lists the candidate colormap indexes. */ + JSAMPLE colorlist[MAXNUMCOLORS]; + int numcolors; /* number of candidate colors */ + /* This array holds the actually closest colormap index for each cell. */ + JSAMPLE bestcolor[BOX_C0_ELEMS * BOX_C1_ELEMS * BOX_C2_ELEMS]; + + /* Convert cell coordinates to update box ID */ + c0 >>= BOX_C0_LOG; + c1 >>= BOX_C1_LOG; + c2 >>= BOX_C2_LOG; + + /* Compute true coordinates of update box's origin corner. + * Actually we compute the coordinates of the center of the corner + * histogram cell, which are the lower bounds of the volume we care about. + */ + minc0 = (c0 << BOX_C0_SHIFT) + ((1 << C0_SHIFT) >> 1); + minc1 = (c1 << BOX_C1_SHIFT) + ((1 << C1_SHIFT) >> 1); + minc2 = (c2 << BOX_C2_SHIFT) + ((1 << C2_SHIFT) >> 1); + + /* Determine which colormap entries are close enough to be candidates + * for the nearest entry to some cell in the update box. + */ + numcolors = find_nearby_colors(cinfo, minc0, minc1, minc2, colorlist); + + /* Determine the actually nearest colors. */ + find_best_colors(cinfo, minc0, minc1, minc2, numcolors, colorlist, + bestcolor); + + /* Save the best color numbers (plus 1) in the main cache array */ + c0 <<= BOX_C0_LOG; /* convert ID back to base cell indexes */ + c1 <<= BOX_C1_LOG; + c2 <<= BOX_C2_LOG; + cptr = bestcolor; + for (ic0 = 0; ic0 < BOX_C0_ELEMS; ic0++) { + for (ic1 = 0; ic1 < BOX_C1_ELEMS; ic1++) { + cachep = & histogram[c0+ic0][c1+ic1][c2]; + for (ic2 = 0; ic2 < BOX_C2_ELEMS; ic2++) { + *cachep++ = (histcell) (GETJSAMPLE(*cptr++) + 1); + } + } + } +} + + +/* + * Map some rows of pixels to the output colormapped representation. + */ + +METHODDEF(void) +pass2_no_dither (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) +/* This version performs no dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + register JSAMPROW inptr, outptr; + register histptr cachep; + register int c0, c1, c2; + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + + for (row = 0; row < num_rows; row++) { + inptr = input_buf[row]; + outptr = output_buf[row]; + for (col = width; col > 0; col--) { + /* get pixel value and index into the cache */ + c0 = GETJSAMPLE(*inptr++) >> C0_SHIFT; + c1 = GETJSAMPLE(*inptr++) >> C1_SHIFT; + c2 = GETJSAMPLE(*inptr++) >> C2_SHIFT; + cachep = & histogram[c0][c1][c2]; + /* If we have not seen this color before, find nearest colormap entry */ + /* and update the cache */ + if (*cachep == 0) + fill_inverse_cmap(cinfo, c0,c1,c2); + /* Now emit the colormap index for this cell */ + *outptr++ = (JSAMPLE) (*cachep - 1); + } + } +} + + +METHODDEF(void) +pass2_fs_dither (j_decompress_ptr cinfo, + JSAMPARRAY input_buf, JSAMPARRAY output_buf, int num_rows) +/* This version performs Floyd-Steinberg dithering */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + register LOCFSERROR cur0, cur1, cur2; /* current error or pixel value */ + LOCFSERROR belowerr0, belowerr1, belowerr2; /* error for pixel below cur */ + LOCFSERROR bpreverr0, bpreverr1, bpreverr2; /* error for below/prev col */ + register FSERRPTR errorptr; /* => fserrors[] at column before current */ + JSAMPROW inptr; /* => current input pixel */ + JSAMPROW outptr; /* => current output pixel */ + histptr cachep; + int dir; /* +1 or -1 depending on direction */ + int dir3; /* 3*dir, for advancing inptr & errorptr */ + int row; + JDIMENSION col; + JDIMENSION width = cinfo->output_width; + JSAMPLE *range_limit = cinfo->sample_range_limit; + int *error_limit = cquantize->error_limiter; + JSAMPROW colormap0 = cinfo->colormap[0]; + JSAMPROW colormap1 = cinfo->colormap[1]; + JSAMPROW colormap2 = cinfo->colormap[2]; + SHIFT_TEMPS + + for (row = 0; row < num_rows; row++) { + inptr = input_buf[row]; + outptr = output_buf[row]; + if (cquantize->on_odd_row) { + /* work right to left in this row */ + inptr += (width-1) * 3; /* so point to rightmost pixel */ + outptr += width-1; + dir = -1; + dir3 = -3; + errorptr = cquantize->fserrors + (width+1)*3; /* => entry after last column */ + cquantize->on_odd_row = FALSE; /* flip for next time */ + } else { + /* work left to right in this row */ + dir = 1; + dir3 = 3; + errorptr = cquantize->fserrors; /* => entry before first real column */ + cquantize->on_odd_row = TRUE; /* flip for next time */ + } + /* Preset error values: no error propagated to first pixel from left */ + cur0 = cur1 = cur2 = 0; + /* and no error propagated to row below yet */ + belowerr0 = belowerr1 = belowerr2 = 0; + bpreverr0 = bpreverr1 = bpreverr2 = 0; + + for (col = width; col > 0; col--) { + /* curN holds the error propagated from the previous pixel on the + * current line. Add the error propagated from the previous line + * to form the complete error correction term for this pixel, and + * round the error term (which is expressed * 16) to an integer. + * RIGHT_SHIFT rounds towards minus infinity, so adding 8 is correct + * for either sign of the error value. + * Note: errorptr points to *previous* column's array entry. + */ + cur0 = RIGHT_SHIFT(cur0 + errorptr[dir3+0] + 8, 4); + cur1 = RIGHT_SHIFT(cur1 + errorptr[dir3+1] + 8, 4); + cur2 = RIGHT_SHIFT(cur2 + errorptr[dir3+2] + 8, 4); + /* Limit the error using transfer function set by init_error_limit. + * See comments with init_error_limit for rationale. + */ + cur0 = error_limit[cur0]; + cur1 = error_limit[cur1]; + cur2 = error_limit[cur2]; + /* Form pixel value + error, and range-limit to 0..MAXJSAMPLE. + * The maximum error is +- MAXJSAMPLE (or less with error limiting); + * this sets the required size of the range_limit array. + */ + cur0 += GETJSAMPLE(inptr[0]); + cur1 += GETJSAMPLE(inptr[1]); + cur2 += GETJSAMPLE(inptr[2]); + cur0 = GETJSAMPLE(range_limit[cur0]); + cur1 = GETJSAMPLE(range_limit[cur1]); + cur2 = GETJSAMPLE(range_limit[cur2]); + /* Index into the cache with adjusted pixel value */ + cachep = & histogram[cur0>>C0_SHIFT][cur1>>C1_SHIFT][cur2>>C2_SHIFT]; + /* If we have not seen this color before, find nearest colormap */ + /* entry and update the cache */ + if (*cachep == 0) + fill_inverse_cmap(cinfo, cur0>>C0_SHIFT,cur1>>C1_SHIFT,cur2>>C2_SHIFT); + /* Now emit the colormap index for this cell */ + { register int pixcode = *cachep - 1; + *outptr = (JSAMPLE) pixcode; + /* Compute representation error for this pixel */ + cur0 -= GETJSAMPLE(colormap0[pixcode]); + cur1 -= GETJSAMPLE(colormap1[pixcode]); + cur2 -= GETJSAMPLE(colormap2[pixcode]); + } + /* Compute error fractions to be propagated to adjacent pixels. + * Add these into the running sums, and simultaneously shift the + * next-line error sums left by 1 column. + */ + { register LOCFSERROR bnexterr, delta; + + bnexterr = cur0; /* Process component 0 */ + delta = cur0 * 2; + cur0 += delta; /* form error * 3 */ + errorptr[0] = (FSERROR) (bpreverr0 + cur0); + cur0 += delta; /* form error * 5 */ + bpreverr0 = belowerr0 + cur0; + belowerr0 = bnexterr; + cur0 += delta; /* form error * 7 */ + bnexterr = cur1; /* Process component 1 */ + delta = cur1 * 2; + cur1 += delta; /* form error * 3 */ + errorptr[1] = (FSERROR) (bpreverr1 + cur1); + cur1 += delta; /* form error * 5 */ + bpreverr1 = belowerr1 + cur1; + belowerr1 = bnexterr; + cur1 += delta; /* form error * 7 */ + bnexterr = cur2; /* Process component 2 */ + delta = cur2 * 2; + cur2 += delta; /* form error * 3 */ + errorptr[2] = (FSERROR) (bpreverr2 + cur2); + cur2 += delta; /* form error * 5 */ + bpreverr2 = belowerr2 + cur2; + belowerr2 = bnexterr; + cur2 += delta; /* form error * 7 */ + } + /* At this point curN contains the 7/16 error value to be propagated + * to the next pixel on the current line, and all the errors for the + * next line have been shifted over. We are therefore ready to move on. + */ + inptr += dir3; /* Advance pixel pointers to next column */ + outptr += dir; + errorptr += dir3; /* advance errorptr to current column */ + } + /* Post-loop cleanup: we must unload the final error values into the + * final fserrors[] entry. Note we need not unload belowerrN because + * it is for the dummy column before or after the actual array. + */ + errorptr[0] = (FSERROR) bpreverr0; /* unload prev errs into array */ + errorptr[1] = (FSERROR) bpreverr1; + errorptr[2] = (FSERROR) bpreverr2; + } +} + + +/* + * Initialize the error-limiting transfer function (lookup table). + * The raw F-S error computation can potentially compute error values of up to + * +- MAXJSAMPLE. But we want the maximum correction applied to a pixel to be + * much less, otherwise obviously wrong pixels will be created. (Typical + * effects include weird fringes at color-area boundaries, isolated bright + * pixels in a dark area, etc.) The standard advice for avoiding this problem + * is to ensure that the "corners" of the color cube are allocated as output + * colors; then repeated errors in the same direction cannot cause cascading + * error buildup. However, that only prevents the error from getting + * completely out of hand; Aaron Giles reports that error limiting improves + * the results even with corner colors allocated. + * A simple clamping of the error values to about +- MAXJSAMPLE/8 works pretty + * well, but the smoother transfer function used below is even better. Thanks + * to Aaron Giles for this idea. + */ + +LOCAL(void) +init_error_limit (j_decompress_ptr cinfo) +/* Allocate and fill in the error_limiter table */ +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + int * table; + int in, out; + + table = (int *) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, (MAXJSAMPLE*2+1) * SIZEOF(int)); + table += MAXJSAMPLE; /* so can index -MAXJSAMPLE .. +MAXJSAMPLE */ + cquantize->error_limiter = table; + +#define STEPSIZE ((MAXJSAMPLE+1)/16) + /* Map errors 1:1 up to +- MAXJSAMPLE/16 */ + out = 0; + for (in = 0; in < STEPSIZE; in++, out++) { + table[in] = out; table[-in] = -out; + } + /* Map errors 1:2 up to +- 3*MAXJSAMPLE/16 */ + for (; in < STEPSIZE*3; in++, out += (in&1) ? 0 : 1) { + table[in] = out; table[-in] = -out; + } + /* Clamp the rest to final out value (which is (MAXJSAMPLE+1)/8) */ + for (; in <= MAXJSAMPLE; in++) { + table[in] = out; table[-in] = -out; + } +#undef STEPSIZE +} + + +/* + * Finish up at the end of each pass. + */ + +METHODDEF(void) +finish_pass1 (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + + /* Select the representative colors and fill in cinfo->colormap */ + cinfo->colormap = cquantize->sv_colormap; + select_colors(cinfo, cquantize->desired); + /* Force next pass to zero the color index table */ + cquantize->needs_zeroed = TRUE; +} + + +METHODDEF(void) +finish_pass2 (j_decompress_ptr cinfo) +{ + /* no work */ +} + + +/* + * Initialize for each processing pass. + */ + +METHODDEF(void) +start_pass_2_quant (j_decompress_ptr cinfo, boolean is_pre_scan) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + hist3d histogram = cquantize->histogram; + int i; + + /* Only F-S dithering or no dithering is supported. */ + /* If user asks for ordered dither, give him F-S. */ + if (cinfo->dither_mode != JDITHER_NONE) + cinfo->dither_mode = JDITHER_FS; + + if (is_pre_scan) { + /* Set up method pointers */ + cquantize->pub.color_quantize = prescan_quantize; + cquantize->pub.finish_pass = finish_pass1; + cquantize->needs_zeroed = TRUE; /* Always zero histogram */ + } else { + /* Set up method pointers */ + if (cinfo->dither_mode == JDITHER_FS) + cquantize->pub.color_quantize = pass2_fs_dither; + else + cquantize->pub.color_quantize = pass2_no_dither; + cquantize->pub.finish_pass = finish_pass2; + + /* Make sure color count is acceptable */ + i = cinfo->actual_number_of_colors; + if (i < 1) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 1); + if (i > MAXNUMCOLORS) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); + + if (cinfo->dither_mode == JDITHER_FS) { + size_t arraysize = (size_t) ((cinfo->output_width + 2) * + (3 * SIZEOF(FSERROR))); + /* Allocate Floyd-Steinberg workspace if we didn't already. */ + if (cquantize->fserrors == NULL) + cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, arraysize); + /* Initialize the propagated errors to zero. */ + jzero_far((void FAR *) cquantize->fserrors, arraysize); + /* Make the error-limit table if we didn't already. */ + if (cquantize->error_limiter == NULL) + init_error_limit(cinfo); + cquantize->on_odd_row = FALSE; + } + + } + /* Zero the histogram or inverse color map, if necessary */ + if (cquantize->needs_zeroed) { + for (i = 0; i < HIST_C0_ELEMS; i++) { + jzero_far((void FAR *) histogram[i], + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + } + cquantize->needs_zeroed = FALSE; + } +} + + +/* + * Switch to a new external colormap between output passes. + */ + +METHODDEF(void) +new_color_map_2_quant (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize = (my_cquantize_ptr) cinfo->cquantize; + + /* Reset the inverse color map */ + cquantize->needs_zeroed = TRUE; +} + + +/* + * Module initialization routine for 2-pass color quantization. + */ + +GLOBAL(void) +jinit_2pass_quantizer (j_decompress_ptr cinfo) +{ + my_cquantize_ptr cquantize; + int i; + + cquantize = (my_cquantize_ptr) + (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, + SIZEOF(my_cquantizer)); + cinfo->cquantize = (struct jpeg_color_quantizer *) cquantize; + cquantize->pub.start_pass = start_pass_2_quant; + cquantize->pub.new_color_map = new_color_map_2_quant; + cquantize->fserrors = NULL; /* flag optional arrays not allocated */ + cquantize->error_limiter = NULL; + + /* Make sure jdmaster didn't give me a case I can't handle */ + if (cinfo->out_color_components != 3) + ERREXIT(cinfo, JERR_NOTIMPL); + + /* Allocate the histogram/inverse colormap storage */ + cquantize->histogram = (hist3d) (*cinfo->mem->alloc_small) + ((j_common_ptr) cinfo, JPOOL_IMAGE, HIST_C0_ELEMS * SIZEOF(hist2d)); + for (i = 0; i < HIST_C0_ELEMS; i++) { + cquantize->histogram[i] = (hist2d) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + HIST_C1_ELEMS*HIST_C2_ELEMS * SIZEOF(histcell)); + } + cquantize->needs_zeroed = TRUE; /* histogram is garbage now */ + + /* Allocate storage for the completed colormap, if required. + * We do this now since it is FAR storage and may affect + * the memory manager's space calculations. + */ + if (cinfo->enable_2pass_quant) { + /* Make sure color count is acceptable */ + int desired = cinfo->desired_number_of_colors; + /* Lower bound on # of colors ... somewhat arbitrary as long as > 0 */ + if (desired < 8) + ERREXIT1(cinfo, JERR_QUANT_FEW_COLORS, 8); + /* Make sure colormap indexes can be represented by JSAMPLEs */ + if (desired > MAXNUMCOLORS) + ERREXIT1(cinfo, JERR_QUANT_MANY_COLORS, MAXNUMCOLORS); + cquantize->sv_colormap = (*cinfo->mem->alloc_sarray) + ((j_common_ptr) cinfo,JPOOL_IMAGE, (JDIMENSION) desired, (JDIMENSION) 3); + cquantize->desired = desired; + } else + cquantize->sv_colormap = NULL; + + /* Only F-S dithering or no dithering is supported. */ + /* If user asks for ordered dither, give him F-S. */ + if (cinfo->dither_mode != JDITHER_NONE) + cinfo->dither_mode = JDITHER_FS; + + /* Allocate Floyd-Steinberg workspace if necessary. + * This isn't really needed until pass 2, but again it is FAR storage. + * Although we will cope with a later change in dither_mode, + * we do not promise to honor max_memory_to_use if dither_mode changes. + */ + if (cinfo->dither_mode == JDITHER_FS) { + cquantize->fserrors = (FSERRPTR) (*cinfo->mem->alloc_large) + ((j_common_ptr) cinfo, JPOOL_IMAGE, + (size_t) ((cinfo->output_width + 2) * (3 * SIZEOF(FSERROR)))); + /* Might as well create the error-limiting table too. */ + init_error_limit(cinfo); + } +} + +#endif /* QUANT_2PASS_SUPPORTED */ diff --git a/src/3rdparty/libjpeg/jutils.c b/src/3rdparty/libjpeg/jutils.c new file mode 100644 index 0000000..0435179 --- /dev/null +++ b/src/3rdparty/libjpeg/jutils.c @@ -0,0 +1,231 @@ +/* + * jutils.c + * + * Copyright (C) 1991-1996, Thomas G. Lane. + * Modified 2009 by Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains tables and miscellaneous utility routines needed + * for both compression and decompression. + * Note we prefix all global names with "j" to minimize conflicts with + * a surrounding application. + */ + +#define JPEG_INTERNALS +#include "jinclude.h" +#include "jpeglib.h" + + +/* + * jpeg_zigzag_order[i] is the zigzag-order position of the i'th element + * of a DCT block read in natural order (left to right, top to bottom). + */ + +#if 0 /* This table is not actually needed in v6a */ + +const int jpeg_zigzag_order[DCTSIZE2] = { + 0, 1, 5, 6, 14, 15, 27, 28, + 2, 4, 7, 13, 16, 26, 29, 42, + 3, 8, 12, 17, 25, 30, 41, 43, + 9, 11, 18, 24, 31, 40, 44, 53, + 10, 19, 23, 32, 39, 45, 52, 54, + 20, 22, 33, 38, 46, 51, 55, 60, + 21, 34, 37, 47, 50, 56, 59, 61, + 35, 36, 48, 49, 57, 58, 62, 63 +}; + +#endif + +/* + * jpeg_natural_order[i] is the natural-order position of the i'th element + * of zigzag order. + * + * When reading corrupted data, the Huffman decoders could attempt + * to reference an entry beyond the end of this array (if the decoded + * zero run length reaches past the end of the block). To prevent + * wild stores without adding an inner-loop test, we put some extra + * "63"s after the real entries. This will cause the extra coefficient + * to be stored in location 63 of the block, not somewhere random. + * The worst case would be a run-length of 15, which means we need 16 + * fake entries. + */ + +const int jpeg_natural_order[DCTSIZE2+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 7, 14, 21, 28, + 35, 42, 49, 56, 57, 50, 43, 36, + 29, 22, 15, 23, 30, 37, 44, 51, + 58, 59, 52, 45, 38, 31, 39, 46, + 53, 60, 61, 54, 47, 55, 62, 63, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order7[7*7+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 48, 41, 34, + 27, 20, 13, 6, 14, 21, 28, 35, + 42, 49, 50, 43, 36, 29, 22, 30, + 37, 44, 51, 52, 45, 38, 46, 53, + 54, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order6[6*6+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 5, + 12, 19, 26, 33, 40, 41, 34, 27, + 20, 13, 21, 28, 35, 42, 43, 36, + 29, 37, 44, 45, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order5[5*5+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 32, 25, 18, 11, 4, 12, + 19, 26, 33, 34, 27, 20, 28, 35, + 36, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order4[4*4+16] = { + 0, 1, 8, 16, 9, 2, 3, 10, + 17, 24, 25, 18, 11, 19, 26, 27, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order3[3*3+16] = { + 0, 1, 8, 16, 9, 2, 10, 17, + 18, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + +const int jpeg_natural_order2[2*2+16] = { + 0, 1, 8, 9, + 63, 63, 63, 63, 63, 63, 63, 63, /* extra entries for safety in decoder */ + 63, 63, 63, 63, 63, 63, 63, 63 +}; + + +/* + * Arithmetic utilities + */ + +GLOBAL(long) +jdiv_round_up (long a, long b) +/* Compute a/b rounded up to next integer, ie, ceil(a/b) */ +/* Assumes a >= 0, b > 0 */ +{ + return (a + b - 1L) / b; +} + + +GLOBAL(long) +jround_up (long a, long b) +/* Compute a rounded up to next multiple of b, ie, ceil(a/b)*b */ +/* Assumes a >= 0, b > 0 */ +{ + a += b - 1L; + return a - (a % b); +} + + +/* On normal machines we can apply MEMCOPY() and MEMZERO() to sample arrays + * and coefficient-block arrays. This won't work on 80x86 because the arrays + * are FAR and we're assuming a small-pointer memory model. However, some + * DOS compilers provide far-pointer versions of memcpy() and memset() even + * in the small-model libraries. These will be used if USE_FMEM is defined. + * Otherwise, the routines below do it the hard way. (The performance cost + * is not all that great, because these routines aren't very heavily used.) + */ + +#ifndef NEED_FAR_POINTERS /* normal case, same as regular macros */ +#define FMEMCOPY(dest,src,size) MEMCOPY(dest,src,size) +#define FMEMZERO(target,size) MEMZERO(target,size) +#else /* 80x86 case, define if we can */ +#ifdef USE_FMEM +#define FMEMCOPY(dest,src,size) _fmemcpy((void FAR *)(dest), (const void FAR *)(src), (size_t)(size)) +#define FMEMZERO(target,size) _fmemset((void FAR *)(target), 0, (size_t)(size)) +#endif +#endif + + +GLOBAL(void) +jcopy_sample_rows (JSAMPARRAY input_array, int source_row, + JSAMPARRAY output_array, int dest_row, + int num_rows, JDIMENSION num_cols) +/* Copy some rows of samples from one place to another. + * num_rows rows are copied from input_array[source_row++] + * to output_array[dest_row++]; these areas may overlap for duplication. + * The source and destination arrays must be at least as wide as num_cols. + */ +{ + register JSAMPROW inptr, outptr; +#ifdef FMEMCOPY + register size_t count = (size_t) (num_cols * SIZEOF(JSAMPLE)); +#else + register JDIMENSION count; +#endif + register int row; + + input_array += source_row; + output_array += dest_row; + + for (row = num_rows; row > 0; row--) { + inptr = *input_array++; + outptr = *output_array++; +#ifdef FMEMCOPY + FMEMCOPY(outptr, inptr, count); +#else + for (count = num_cols; count > 0; count--) + *outptr++ = *inptr++; /* needn't bother with GETJSAMPLE() here */ +#endif + } +} + + +GLOBAL(void) +jcopy_block_row (JBLOCKROW input_row, JBLOCKROW output_row, + JDIMENSION num_blocks) +/* Copy a row of coefficient blocks from one place to another. */ +{ +#ifdef FMEMCOPY + FMEMCOPY(output_row, input_row, num_blocks * (DCTSIZE2 * SIZEOF(JCOEF))); +#else + register JCOEFPTR inptr, outptr; + register long count; + + inptr = (JCOEFPTR) input_row; + outptr = (JCOEFPTR) output_row; + for (count = (long) num_blocks * DCTSIZE2; count > 0; count--) { + *outptr++ = *inptr++; + } +#endif +} + + +GLOBAL(void) +jzero_far (void FAR * target, size_t bytestozero) +/* Zero out a chunk of FAR memory. */ +/* This might be sample-array data, block-array data, or alloc_large data. */ +{ +#ifdef FMEMZERO + FMEMZERO(target, bytestozero); +#else + register char FAR * ptr = (char FAR *) target; + register size_t count; + + for (count = bytestozero; count > 0; count--) { + *ptr++ = 0; + } +#endif +} diff --git a/src/3rdparty/libjpeg/jversion.h b/src/3rdparty/libjpeg/jversion.h new file mode 100644 index 0000000..0c4e6ea --- /dev/null +++ b/src/3rdparty/libjpeg/jversion.h @@ -0,0 +1,14 @@ +/* + * jversion.h + * + * Copyright (C) 1991-2010, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains software version identification. + */ + + +#define JVERSION "8 10-Jan-2010" + +#define JCOPYRIGHT "Copyright (C) 2010, Thomas G. Lane, Guido Vollbeding" diff --git a/src/3rdparty/libjpeg/libjpeg.map b/src/3rdparty/libjpeg/libjpeg.map new file mode 100644 index 0000000..ac77dca --- /dev/null +++ b/src/3rdparty/libjpeg/libjpeg.map @@ -0,0 +1,4 @@ +LIBJPEG_8.0 { + global: + *; +}; diff --git a/src/3rdparty/libjpeg/libjpeg.txt b/src/3rdparty/libjpeg/libjpeg.txt new file mode 100644 index 0000000..e5a85c0 --- /dev/null +++ b/src/3rdparty/libjpeg/libjpeg.txt @@ -0,0 +1,3070 @@ +USING THE IJG JPEG LIBRARY + +Copyright (C) 1994-2009, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file describes how to use the IJG JPEG library within an application +program. Read it if you want to write a program that uses the library. + +The file example.c provides heavily commented skeleton code for calling the +JPEG library. Also see jpeglib.h (the include file to be used by application +programs) for full details about data structures and function parameter lists. +The library source code, of course, is the ultimate reference. + +Note that there have been *major* changes from the application interface +presented by IJG version 4 and earlier versions. The old design had several +inherent limitations, and it had accumulated a lot of cruft as we added +features while trying to minimize application-interface changes. We have +sacrificed backward compatibility in the version 5 rewrite, but we think the +improvements justify this. + + +TABLE OF CONTENTS +----------------- + +Overview: + Functions provided by the library + Outline of typical usage +Basic library usage: + Data formats + Compression details + Decompression details + Mechanics of usage: include files, linking, etc +Advanced features: + Compression parameter selection + Decompression parameter selection + Special color spaces + Error handling + Compressed data handling (source and destination managers) + I/O suspension + Progressive JPEG support + Buffered-image mode + Abbreviated datastreams and multiple images + Special markers + Raw (downsampled) image data + Really raw data: DCT coefficients + Progress monitoring + Memory management + Memory usage + Library compile-time options + Portability considerations + Notes for MS-DOS implementors + +You should read at least the overview and basic usage sections before trying +to program with the library. The sections on advanced features can be read +if and when you need them. + + +OVERVIEW +======== + +Functions provided by the library +--------------------------------- + +The IJG JPEG library provides C code to read and write JPEG-compressed image +files. The surrounding application program receives or supplies image data a +scanline at a time, using a straightforward uncompressed image format. All +details of color conversion and other preprocessing/postprocessing can be +handled by the library. + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. The application indirectly selects use of this code +by specifying the format in which it wishes to supply or receive image data. +For example, if colormapped output is requested, then the decompression +library automatically invokes color quantization. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + +A word about functions *not* provided by the library. We handle a subset of +the ISO JPEG standard; most baseline, extended-sequential, and progressive +JPEG processes are supported. (Our subset includes all features now in common +use.) Unsupported ISO options include: + * Hierarchical storage + * Lossless JPEG + * DNL marker + * Nonintegral subsampling ratios +We support both 8- and 12-bit data precision, but this is a compile-time +choice rather than a run-time choice; hence it is difficult to use both +precisions in a single application. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, this library is +used by the free LIBTIFF library to support JPEG compression in TIFF.) + + +Outline of typical usage +------------------------ + +The rough outline of a JPEG compression operation is: + + Allocate and initialize a JPEG compression object + Specify the destination for the compressed data (eg, a file) + Set parameters for compression, including image size & colorspace + jpeg_start_compress(...); + while (scan lines remain to be written) + jpeg_write_scanlines(...); + jpeg_finish_compress(...); + Release the JPEG compression object + +A JPEG compression object holds parameters and working state for the JPEG +library. We make creation/destruction of the object separate from starting +or finishing compression of an image; the same object can be re-used for a +series of image compression operations. This makes it easy to re-use the +same parameter settings for a sequence of images. Re-use of a JPEG object +also has important implications for processing abbreviated JPEG datastreams, +as discussed later. + +The image data to be compressed is supplied to jpeg_write_scanlines() from +in-memory buffers. If the application is doing file-to-file compression, +reading image data from the source file is the application's responsibility. +The library emits compressed data by calling a "data destination manager", +which typically will write the data into a file; but the application can +provide its own destination manager to do something else. + +Similarly, the rough outline of a JPEG decompression operation is: + + Allocate and initialize a JPEG decompression object + Specify the source of the compressed data (eg, a file) + Call jpeg_read_header() to obtain image info + Set parameters for decompression + jpeg_start_decompress(...); + while (scan lines remain to be read) + jpeg_read_scanlines(...); + jpeg_finish_decompress(...); + Release the JPEG decompression object + +This is comparable to the compression outline except that reading the +datastream header is a separate step. This is helpful because information +about the image's size, colorspace, etc is available when the application +selects decompression parameters. For example, the application can choose an +output scaling ratio that will fit the image into the available screen size. + +The decompression library obtains compressed data by calling a data source +manager, which typically will read the data from a file; but other behaviors +can be obtained with a custom source manager. Decompressed data is delivered +into in-memory buffers passed to jpeg_read_scanlines(). + +It is possible to abort an incomplete compression or decompression operation +by calling jpeg_abort(); or, if you do not need to retain the JPEG object, +simply release it by calling jpeg_destroy(). + +JPEG compression and decompression objects are two separate struct types. +However, they share some common fields, and certain routines such as +jpeg_destroy() can work on either type of object. + +The JPEG library has no static variables: all state is in the compression +or decompression object. Therefore it is possible to process multiple +compression and decompression operations concurrently, using multiple JPEG +objects. + +Both compression and decompression can be done in an incremental memory-to- +memory fashion, if suitable source/destination managers are used. See the +section on "I/O suspension" for more details. + + +BASIC LIBRARY USAGE +=================== + +Data formats +------------ + +Before diving into procedural details, it is helpful to understand the +image data format that the JPEG library expects or returns. + +The standard input image format is a rectangular array of pixels, with each +pixel having the same number of "component" or "sample" values (color +channels). You must specify how many components there are and the colorspace +interpretation of the components. Most applications will use RGB data +(three components per pixel) or grayscale data (one component per pixel). +PLEASE NOTE THAT RGB DATA IS THREE SAMPLES PER PIXEL, GRAYSCALE ONLY ONE. +A remarkable number of people manage to miss this, only to find that their +programs don't work with grayscale JPEG files. + +There is no provision for colormapped input. JPEG files are always full-color +or full grayscale (or sometimes another colorspace such as CMYK). You can +feed in a colormapped image by expanding it to full-color format. However +JPEG often doesn't work very well with source data that has been colormapped, +because of dithering noise. This is discussed in more detail in the JPEG FAQ +and the other references mentioned in the README file. + +Pixels are stored by scanlines, with each scanline running from left to +right. The component values for each pixel are adjacent in the row; for +example, R,G,B,R,G,B,R,G,B,... for 24-bit RGB color. Each scanline is an +array of data type JSAMPLE --- which is typically "unsigned char", unless +you've changed jmorecfg.h. (You can also change the RGB pixel layout, say +to B,G,R order, by modifying jmorecfg.h. But see the restrictions listed in +that file before doing so.) + +A 2-D array of pixels is formed by making a list of pointers to the starts of +scanlines; so the scanlines need not be physically adjacent in memory. Even +if you process just one scanline at a time, you must make a one-element +pointer array to conform to this structure. Pointers to JSAMPLE rows are of +type JSAMPROW, and the pointer to the pointer array is of type JSAMPARRAY. + +The library accepts or supplies one or more complete scanlines per call. +It is not possible to process part of a row at a time. Scanlines are always +processed top-to-bottom. You can process an entire image in one call if you +have it all in memory, but usually it's simplest to process one scanline at +a time. + +For best results, source data values should have the precision specified by +BITS_IN_JSAMPLE (normally 8 bits). For instance, if you choose to compress +data that's only 6 bits/channel, you should left-justify each value in a +byte before passing it to the compressor. If you need to compress data +that has more than 8 bits/channel, compile with BITS_IN_JSAMPLE = 12. +(See "Library compile-time options", later.) + + +The data format returned by the decompressor is the same in all details, +except that colormapped output is supported. (Again, a JPEG file is never +colormapped. But you can ask the decompressor to perform on-the-fly color +quantization to deliver colormapped output.) If you request colormapped +output then the returned data array contains a single JSAMPLE per pixel; +its value is an index into a color map. The color map is represented as +a 2-D JSAMPARRAY in which each row holds the values of one color component, +that is, colormap[i][j] is the value of the i'th color component for pixel +value (map index) j. Note that since the colormap indexes are stored in +JSAMPLEs, the maximum number of colors is limited by the size of JSAMPLE +(ie, at most 256 colors for an 8-bit JPEG library). + + +Compression details +------------------- + +Here we revisit the JPEG compression outline given in the overview. + +1. Allocate and initialize a JPEG compression object. + +A JPEG compression object is a "struct jpeg_compress_struct". (It also has +a bunch of subsidiary structures which are allocated via malloc(), but the +application doesn't control those directly.) This struct can be just a local +variable in the calling routine, if a single routine is going to execute the +whole JPEG compression sequence. Otherwise it can be static or allocated +from malloc(). + +You will also need a structure representing a JPEG error handler. The part +of this that the library cares about is a "struct jpeg_error_mgr". If you +are providing your own error handler, you'll typically want to embed the +jpeg_error_mgr struct in a larger structure; this is discussed later under +"Error handling". For now we'll assume you are just using the default error +handler. The default error handler will print JPEG error/warning messages +on stderr, and it will call exit() if a fatal error occurs. + +You must initialize the error handler structure, store a pointer to it into +the JPEG object's "err" field, and then call jpeg_create_compress() to +initialize the rest of the JPEG object. + +Typical code for this step, if you are using the default error handler, is + + struct jpeg_compress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_compress(&cinfo); + +jpeg_create_compress allocates a small amount of memory, so it could fail +if you are out of memory. In that case it will exit via the error handler; +that's why the error handler must be initialized first. + + +2. Specify the destination for the compressed data (eg, a file). + +As previously mentioned, the JPEG library delivers compressed data to a +"data destination" module. The library includes one data destination +module which knows how to write to a stdio stream. You can use your own +destination module if you want to do something else, as discussed later. + +If you use the standard destination module, you must open the target stdio +stream beforehand. Typical code for this step looks like: + + FILE * outfile; + ... + if ((outfile = fopen(filename, "wb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_dest(&cinfo, outfile); + +where the last line invokes the standard destination module. + +WARNING: it is critical that the binary compressed data be delivered to the +output file unchanged. On non-Unix systems the stdio library may perform +newline translation or otherwise corrupt binary data. To suppress this +behavior, you may need to use a "b" option to fopen (as shown above), or use +setmode() or another routine to put the stdio stream in binary mode. See +cjpeg.c and djpeg.c for code that has been found to work on many systems. + +You can select the data destination after setting other parameters (step 3), +if that's more convenient. You may not change the destination between +calling jpeg_start_compress() and jpeg_finish_compress(). + + +3. Set parameters for compression, including image size & colorspace. + +You must supply information about the source image by setting the following +fields in the JPEG object (cinfo structure): + + image_width Width of image, in pixels + image_height Height of image, in pixels + input_components Number of color channels (samples per pixel) + in_color_space Color space of source image + +The image dimensions are, hopefully, obvious. JPEG supports image dimensions +of 1 to 64K pixels in either direction. The input color space is typically +RGB or grayscale, and input_components is 3 or 1 accordingly. (See "Special +color spaces", later, for more info.) The in_color_space field must be +assigned one of the J_COLOR_SPACE enum constants, typically JCS_RGB or +JCS_GRAYSCALE. + +JPEG has a large number of compression parameters that determine how the +image is encoded. Most applications don't need or want to know about all +these parameters. You can set all the parameters to reasonable defaults by +calling jpeg_set_defaults(); then, if there are particular values you want +to change, you can do so after that. The "Compression parameter selection" +section tells about all the parameters. + +You must set in_color_space correctly before calling jpeg_set_defaults(), +because the defaults depend on the source image colorspace. However the +other three source image parameters need not be valid until you call +jpeg_start_compress(). There's no harm in calling jpeg_set_defaults() more +than once, if that happens to be convenient. + +Typical code for a 24-bit RGB source image is + + cinfo.image_width = Width; /* image width and height, in pixels */ + cinfo.image_height = Height; + cinfo.input_components = 3; /* # of color components per pixel */ + cinfo.in_color_space = JCS_RGB; /* colorspace of input image */ + + jpeg_set_defaults(&cinfo); + /* Make optional parameter settings here */ + + +4. jpeg_start_compress(...); + +After you have established the data destination and set all the necessary +source image info and other parameters, call jpeg_start_compress() to begin +a compression cycle. This will initialize internal state, allocate working +storage, and emit the first few bytes of the JPEG datastream header. + +Typical code: + + jpeg_start_compress(&cinfo, TRUE); + +The "TRUE" parameter ensures that a complete JPEG interchange datastream +will be written. This is appropriate in most cases. If you think you might +want to use an abbreviated datastream, read the section on abbreviated +datastreams, below. + +Once you have called jpeg_start_compress(), you may not alter any JPEG +parameters or other fields of the JPEG object until you have completed +the compression cycle. + + +5. while (scan lines remain to be written) + jpeg_write_scanlines(...); + +Now write all the required image data by calling jpeg_write_scanlines() +one or more times. You can pass one or more scanlines in each call, up +to the total image height. In most applications it is convenient to pass +just one or a few scanlines at a time. The expected format for the passed +data is discussed under "Data formats", above. + +Image data should be written in top-to-bottom scanline order. The JPEG spec +contains some weasel wording about how top and bottom are application-defined +terms (a curious interpretation of the English language...) but if you want +your files to be compatible with everyone else's, you WILL use top-to-bottom +order. If the source data must be read in bottom-to-top order, you can use +the JPEG library's virtual array mechanism to invert the data efficiently. +Examples of this can be found in the sample application cjpeg. + +The library maintains a count of the number of scanlines written so far +in the next_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.next_scanline < cinfo.image_height)". + +Code for this step depends heavily on the way that you store the source data. +example.c shows the following code for the case of a full-size 2-D source +array containing 3-byte RGB pixels: + + JSAMPROW row_pointer[1]; /* pointer to a single row */ + int row_stride; /* physical row width in buffer */ + + row_stride = image_width * 3; /* JSAMPLEs per row in image_buffer */ + + while (cinfo.next_scanline < cinfo.image_height) { + row_pointer[0] = & image_buffer[cinfo.next_scanline * row_stride]; + jpeg_write_scanlines(&cinfo, row_pointer, 1); + } + +jpeg_write_scanlines() returns the number of scanlines actually written. +This will normally be equal to the number passed in, so you can usually +ignore the return value. It is different in just two cases: + * If you try to write more scanlines than the declared image height, + the additional scanlines are ignored. + * If you use a suspending data destination manager, output buffer overrun + will cause the compressor to return before accepting all the passed lines. + This feature is discussed under "I/O suspension", below. The normal + stdio destination manager will NOT cause this to happen. +In any case, the return value is the same as the change in the value of +next_scanline. + + +6. jpeg_finish_compress(...); + +After all the image data has been written, call jpeg_finish_compress() to +complete the compression cycle. This step is ESSENTIAL to ensure that the +last bufferload of data is written to the data destination. +jpeg_finish_compress() also releases working memory associated with the JPEG +object. + +Typical code: + + jpeg_finish_compress(&cinfo); + +If using the stdio destination manager, don't forget to close the output +stdio stream (if necessary) afterwards. + +If you have requested a multi-pass operating mode, such as Huffman code +optimization, jpeg_finish_compress() will perform the additional passes using +data buffered by the first pass. In this case jpeg_finish_compress() may take +quite a while to complete. With the default compression parameters, this will +not happen. + +It is an error to call jpeg_finish_compress() before writing the necessary +total number of scanlines. If you wish to abort compression, call +jpeg_abort() as discussed below. + +After completing a compression cycle, you may dispose of the JPEG object +as discussed next, or you may use it to compress another image. In that case +return to step 2, 3, or 4 as appropriate. If you do not change the +destination manager, the new datastream will be written to the same target. +If you do not change any JPEG parameters, the new datastream will be written +with the same parameters as before. Note that you can change the input image +dimensions freely between cycles, but if you change the input colorspace, you +should call jpeg_set_defaults() to adjust for the new colorspace; and then +you'll need to repeat all of step 3. + + +7. Release the JPEG compression object. + +When you are done with a JPEG compression object, destroy it by calling +jpeg_destroy_compress(). This will free all subsidiary memory (regardless of +the previous state of the object). Or you can call jpeg_destroy(), which +works for either compression or decompression objects --- this may be more +convenient if you are sharing code between compression and decompression +cases. (Actually, these routines are equivalent except for the declared type +of the passed pointer. To avoid gripes from ANSI C compilers, jpeg_destroy() +should be passed a j_common_ptr.) + +If you allocated the jpeg_compress_struct structure from malloc(), freeing +it is your responsibility --- jpeg_destroy() won't. Ditto for the error +handler structure. + +Typical code: + + jpeg_destroy_compress(&cinfo); + + +8. Aborting. + +If you decide to abort a compression cycle before finishing, you can clean up +in either of two ways: + +* If you don't need the JPEG object any more, just call + jpeg_destroy_compress() or jpeg_destroy() to release memory. This is + legitimate at any point after calling jpeg_create_compress() --- in fact, + it's safe even if jpeg_create_compress() fails. + +* If you want to re-use the JPEG object, call jpeg_abort_compress(), or call + jpeg_abort() which works on both compression and decompression objects. + This will return the object to an idle state, releasing any working memory. + jpeg_abort() is allowed at any time after successful object creation. + +Note that cleaning up the data destination, if required, is your +responsibility; neither of these routines will call term_destination(). +(See "Compressed data handling", below, for more about that.) + +jpeg_destroy() and jpeg_abort() are the only safe calls to make on a JPEG +object that has reported an error by calling error_exit (see "Error handling" +for more info). The internal state of such an object is likely to be out of +whack. Either of these two routines will return the object to a known state. + + +Decompression details +--------------------- + +Here we revisit the JPEG decompression outline given in the overview. + +1. Allocate and initialize a JPEG decompression object. + +This is just like initialization for compression, as discussed above, +except that the object is a "struct jpeg_decompress_struct" and you +call jpeg_create_decompress(). Error handling is exactly the same. + +Typical code: + + struct jpeg_decompress_struct cinfo; + struct jpeg_error_mgr jerr; + ... + cinfo.err = jpeg_std_error(&jerr); + jpeg_create_decompress(&cinfo); + +(Both here and in the IJG code, we usually use variable name "cinfo" for +both compression and decompression objects.) + + +2. Specify the source of the compressed data (eg, a file). + +As previously mentioned, the JPEG library reads compressed data from a "data +source" module. The library includes one data source module which knows how +to read from a stdio stream. You can use your own source module if you want +to do something else, as discussed later. + +If you use the standard source module, you must open the source stdio stream +beforehand. Typical code for this step looks like: + + FILE * infile; + ... + if ((infile = fopen(filename, "rb")) == NULL) { + fprintf(stderr, "can't open %s\n", filename); + exit(1); + } + jpeg_stdio_src(&cinfo, infile); + +where the last line invokes the standard source module. + +WARNING: it is critical that the binary compressed data be read unchanged. +On non-Unix systems the stdio library may perform newline translation or +otherwise corrupt binary data. To suppress this behavior, you may need to use +a "b" option to fopen (as shown above), or use setmode() or another routine to +put the stdio stream in binary mode. See cjpeg.c and djpeg.c for code that +has been found to work on many systems. + +You may not change the data source between calling jpeg_read_header() and +jpeg_finish_decompress(). If you wish to read a series of JPEG images from +a single source file, you should repeat the jpeg_read_header() to +jpeg_finish_decompress() sequence without reinitializing either the JPEG +object or the data source module; this prevents buffered input data from +being discarded. + + +3. Call jpeg_read_header() to obtain image info. + +Typical code for this step is just + + jpeg_read_header(&cinfo, TRUE); + +This will read the source datastream header markers, up to the beginning +of the compressed data proper. On return, the image dimensions and other +info have been stored in the JPEG object. The application may wish to +consult this information before selecting decompression parameters. + +More complex code is necessary if + * A suspending data source is used --- in that case jpeg_read_header() + may return before it has read all the header data. See "I/O suspension", + below. The normal stdio source manager will NOT cause this to happen. + * Abbreviated JPEG files are to be processed --- see the section on + abbreviated datastreams. Standard applications that deal only in + interchange JPEG files need not be concerned with this case either. + +It is permissible to stop at this point if you just wanted to find out the +image dimensions and other header info for a JPEG file. In that case, +call jpeg_destroy() when you are done with the JPEG object, or call +jpeg_abort() to return it to an idle state before selecting a new data +source and reading another header. + + +4. Set parameters for decompression. + +jpeg_read_header() sets appropriate default decompression parameters based on +the properties of the image (in particular, its colorspace). However, you +may well want to alter these defaults before beginning the decompression. +For example, the default is to produce full color output from a color file. +If you want colormapped output you must ask for it. Other options allow the +returned image to be scaled and allow various speed/quality tradeoffs to be +selected. "Decompression parameter selection", below, gives details. + +If the defaults are appropriate, nothing need be done at this step. + +Note that all default values are set by each call to jpeg_read_header(). +If you reuse a decompression object, you cannot expect your parameter +settings to be preserved across cycles, as you can for compression. +You must set desired parameter values each time. + + +5. jpeg_start_decompress(...); + +Once the parameter values are satisfactory, call jpeg_start_decompress() to +begin decompression. This will initialize internal state, allocate working +memory, and prepare for returning data. + +Typical code is just + + jpeg_start_decompress(&cinfo); + +If you have requested a multi-pass operating mode, such as 2-pass color +quantization, jpeg_start_decompress() will do everything needed before data +output can begin. In this case jpeg_start_decompress() may take quite a while +to complete. With a single-scan (non progressive) JPEG file and default +decompression parameters, this will not happen; jpeg_start_decompress() will +return quickly. + +After this call, the final output image dimensions, including any requested +scaling, are available in the JPEG object; so is the selected colormap, if +colormapped output has been requested. Useful fields include + + output_width image width and height, as scaled + output_height + out_color_components # of color components in out_color_space + output_components # of color components returned per pixel + colormap the selected colormap, if any + actual_number_of_colors number of entries in colormap + +output_components is 1 (a colormap index) when quantizing colors; otherwise it +equals out_color_components. It is the number of JSAMPLE values that will be +emitted per pixel in the output arrays. + +Typically you will need to allocate data buffers to hold the incoming image. +You will need output_width * output_components JSAMPLEs per scanline in your +output buffer, and a total of output_height scanlines will be returned. + +Note: if you are using the JPEG library's internal memory manager to allocate +data buffers (as djpeg does), then the manager's protocol requires that you +request large buffers *before* calling jpeg_start_decompress(). This is a +little tricky since the output_XXX fields are not normally valid then. You +can make them valid by calling jpeg_calc_output_dimensions() after setting the +relevant parameters (scaling, output color space, and quantization flag). + + +6. while (scan lines remain to be read) + jpeg_read_scanlines(...); + +Now you can read the decompressed image data by calling jpeg_read_scanlines() +one or more times. At each call, you pass in the maximum number of scanlines +to be read (ie, the height of your working buffer); jpeg_read_scanlines() +will return up to that many lines. The return value is the number of lines +actually read. The format of the returned data is discussed under "Data +formats", above. Don't forget that grayscale and color JPEGs will return +different data formats! + +Image data is returned in top-to-bottom scanline order. If you must write +out the image in bottom-to-top order, you can use the JPEG library's virtual +array mechanism to invert the data efficiently. Examples of this can be +found in the sample application djpeg. + +The library maintains a count of the number of scanlines returned so far +in the output_scanline field of the JPEG object. Usually you can just use +this variable as the loop counter, so that the loop test looks like +"while (cinfo.output_scanline < cinfo.output_height)". (Note that the test +should NOT be against image_height, unless you never use scaling. The +image_height field is the height of the original unscaled image.) +The return value always equals the change in the value of output_scanline. + +If you don't use a suspending data source, it is safe to assume that +jpeg_read_scanlines() reads at least one scanline per call, until the +bottom of the image has been reached. + +If you use a buffer larger than one scanline, it is NOT safe to assume that +jpeg_read_scanlines() fills it. (The current implementation returns only a +few scanlines per call, no matter how large a buffer you pass.) So you must +always provide a loop that calls jpeg_read_scanlines() repeatedly until the +whole image has been read. + + +7. jpeg_finish_decompress(...); + +After all the image data has been read, call jpeg_finish_decompress() to +complete the decompression cycle. This causes working memory associated +with the JPEG object to be released. + +Typical code: + + jpeg_finish_decompress(&cinfo); + +If using the stdio source manager, don't forget to close the source stdio +stream if necessary. + +It is an error to call jpeg_finish_decompress() before reading the correct +total number of scanlines. If you wish to abort decompression, call +jpeg_abort() as discussed below. + +After completing a decompression cycle, you may dispose of the JPEG object as +discussed next, or you may use it to decompress another image. In that case +return to step 2 or 3 as appropriate. If you do not change the source +manager, the next image will be read from the same source. + + +8. Release the JPEG decompression object. + +When you are done with a JPEG decompression object, destroy it by calling +jpeg_destroy_decompress() or jpeg_destroy(). The previous discussion of +destroying compression objects applies here too. + +Typical code: + + jpeg_destroy_decompress(&cinfo); + + +9. Aborting. + +You can abort a decompression cycle by calling jpeg_destroy_decompress() or +jpeg_destroy() if you don't need the JPEG object any more, or +jpeg_abort_decompress() or jpeg_abort() if you want to reuse the object. +The previous discussion of aborting compression cycles applies here too. + + +Mechanics of usage: include files, linking, etc +----------------------------------------------- + +Applications using the JPEG library should include the header file jpeglib.h +to obtain declarations of data types and routines. Before including +jpeglib.h, include system headers that define at least the typedefs FILE and +size_t. On ANSI-conforming systems, including is sufficient; on +older Unix systems, you may need to define size_t. + +If the application needs to refer to individual JPEG library error codes, also +include jerror.h to define those symbols. + +jpeglib.h indirectly includes the files jconfig.h and jmorecfg.h. If you are +installing the JPEG header files in a system directory, you will want to +install all four files: jpeglib.h, jerror.h, jconfig.h, jmorecfg.h. + +The most convenient way to include the JPEG code into your executable program +is to prepare a library file ("libjpeg.a", or a corresponding name on non-Unix +machines) and reference it at your link step. If you use only half of the +library (only compression or only decompression), only that much code will be +included from the library, unless your linker is hopelessly brain-damaged. +The supplied makefiles build libjpeg.a automatically (see install.txt). + +While you can build the JPEG library as a shared library if the whim strikes +you, we don't really recommend it. The trouble with shared libraries is that +at some point you'll probably try to substitute a new version of the library +without recompiling the calling applications. That generally doesn't work +because the parameter struct declarations usually change with each new +version. In other words, the library's API is *not* guaranteed binary +compatible across versions; we only try to ensure source-code compatibility. +(In hindsight, it might have been smarter to hide the parameter structs from +applications and introduce a ton of access functions instead. Too late now, +however.) + +On some systems your application may need to set up a signal handler to ensure +that temporary files are deleted if the program is interrupted. This is most +critical if you are on MS-DOS and use the jmemdos.c memory manager back end; +it will try to grab extended memory for temp files, and that space will NOT be +freed automatically. See cjpeg.c or djpeg.c for an example signal handler. + +It may be worth pointing out that the core JPEG library does not actually +require the stdio library: only the default source/destination managers and +error handler need it. You can use the library in a stdio-less environment +if you replace those modules and use jmemnobs.c (or another memory manager of +your own devising). More info about the minimum system library requirements +may be found in jinclude.h. + + +ADVANCED FEATURES +================= + +Compression parameter selection +------------------------------- + +This section describes all the optional parameters you can set for JPEG +compression, as well as the "helper" routines provided to assist in this +task. Proper setting of some parameters requires detailed understanding +of the JPEG standard; if you don't know what a parameter is for, it's best +not to mess with it! See REFERENCES in the README file for pointers to +more info about JPEG. + +It's a good idea to call jpeg_set_defaults() first, even if you plan to set +all the parameters; that way your code is more likely to work with future JPEG +libraries that have additional parameters. For the same reason, we recommend +you use a helper routine where one is provided, in preference to twiddling +cinfo fields directly. + +The helper routines are: + +jpeg_set_defaults (j_compress_ptr cinfo) + This routine sets all JPEG parameters to reasonable defaults, using + only the input image's color space (field in_color_space, which must + already be set in cinfo). Many applications will only need to use + this routine and perhaps jpeg_set_quality(). + +jpeg_set_colorspace (j_compress_ptr cinfo, J_COLOR_SPACE colorspace) + Sets the JPEG file's colorspace (field jpeg_color_space) as specified, + and sets other color-space-dependent parameters appropriately. See + "Special color spaces", below, before using this. A large number of + parameters, including all per-component parameters, are set by this + routine; if you want to twiddle individual parameters you should call + jpeg_set_colorspace() before rather than after. + +jpeg_default_colorspace (j_compress_ptr cinfo) + Selects an appropriate JPEG colorspace based on cinfo->in_color_space, + and calls jpeg_set_colorspace(). This is actually a subroutine of + jpeg_set_defaults(). It's broken out in case you want to change + just the colorspace-dependent JPEG parameters. + +jpeg_set_quality (j_compress_ptr cinfo, int quality, boolean force_baseline) + Constructs JPEG quantization tables appropriate for the indicated + quality setting. The quality value is expressed on the 0..100 scale + recommended by IJG (cjpeg's "-quality" switch uses this routine). + Note that the exact mapping from quality values to tables may change + in future IJG releases as more is learned about DCT quantization. + If the force_baseline parameter is TRUE, then the quantization table + entries are constrained to the range 1..255 for full JPEG baseline + compatibility. In the current implementation, this only makes a + difference for quality settings below 25, and it effectively prevents + very small/low quality files from being generated. The IJG decoder + is capable of reading the non-baseline files generated at low quality + settings when force_baseline is FALSE, but other decoders may not be. + +jpeg_set_linear_quality (j_compress_ptr cinfo, int scale_factor, + boolean force_baseline) + Same as jpeg_set_quality() except that the generated tables are the + sample tables given in the JPEC spec section K.1, multiplied by the + specified scale factor (which is expressed as a percentage; thus + scale_factor = 100 reproduces the spec's tables). Note that larger + scale factors give lower quality. This entry point is useful for + conforming to the Adobe PostScript DCT conventions, but we do not + recommend linear scaling as a user-visible quality scale otherwise. + force_baseline again constrains the computed table entries to 1..255. + +int jpeg_quality_scaling (int quality) + Converts a value on the IJG-recommended quality scale to a linear + scaling percentage. Note that this routine may change or go away + in future releases --- IJG may choose to adopt a scaling method that + can't be expressed as a simple scalar multiplier, in which case the + premise of this routine collapses. Caveat user. + +jpeg_default_qtables (j_compress_ptr cinfo, boolean force_baseline) + Set default quantization tables with linear q_scale_factor[] values + (see below). + +jpeg_add_quant_table (j_compress_ptr cinfo, int which_tbl, + const unsigned int *basic_table, + int scale_factor, boolean force_baseline) + Allows an arbitrary quantization table to be created. which_tbl + indicates which table slot to fill. basic_table points to an array + of 64 unsigned ints given in normal array order. These values are + multiplied by scale_factor/100 and then clamped to the range 1..65535 + (or to 1..255 if force_baseline is TRUE). + CAUTION: prior to library version 6a, jpeg_add_quant_table expected + the basic table to be given in JPEG zigzag order. If you need to + write code that works with either older or newer versions of this + routine, you must check the library version number. Something like + "#if JPEG_LIB_VERSION >= 61" is the right test. + +jpeg_simple_progression (j_compress_ptr cinfo) + Generates a default scan script for writing a progressive-JPEG file. + This is the recommended method of creating a progressive file, + unless you want to make a custom scan sequence. You must ensure that + the JPEG color space is set correctly before calling this routine. + + +Compression parameters (cinfo fields) include: + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are: + JDCT_ISLOW: slow but accurate integer algorithm + JDCT_IFAST: faster, less accurate integer method + JDCT_FLOAT: floating-point method + JDCT_DEFAULT: default method (normally JDCT_ISLOW) + JDCT_FASTEST: fastest method (normally JDCT_IFAST) + The FLOAT method is very slightly more accurate than the ISLOW method, + but may give different results on different machines due to varying + roundoff behavior. The integer methods should give the same results + on all machines. On machines with sufficiently fast FP hardware, the + floating-point method may also be the fastest. The IFAST method is + considerably less accurate than the other two; its use is not + recommended if high quality is a concern. JDCT_DEFAULT and + JDCT_FASTEST are macros configurable by each installation. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Default is + 1/1, or no scaling. Currently, the supported scaling ratios are + 8/N with all N from 1 to 16. (The library design allows for arbitrary + scaling ratios but this is not likely to be implemented any time soon.) + +J_COLOR_SPACE jpeg_color_space +int num_components + The JPEG color space and corresponding number of components; see + "Special color spaces", below, for more info. We recommend using + jpeg_set_color_space() if you want to change these. + +boolean optimize_coding + TRUE causes the compressor to compute optimal Huffman coding tables + for the image. This requires an extra pass over the data and + therefore costs a good deal of space and time. The default is + FALSE, which tells the compressor to use the supplied or default + Huffman tables. In most cases optimal tables save only a few percent + of file size compared to the default tables. Note that when this is + TRUE, you need not supply Huffman tables at all, and any you do + supply will be overwritten. + +unsigned int restart_interval +int restart_in_rows + To emit restart markers in the JPEG file, set one of these nonzero. + Set restart_interval to specify the exact interval in MCU blocks. + Set restart_in_rows to specify the interval in MCU rows. (If + restart_in_rows is not 0, then restart_interval is set after the + image width in MCUs is computed.) Defaults are zero (no restarts). + One restart marker per MCU row is often a good choice. + NOTE: the overhead of restart markers is higher in grayscale JPEG + files than in color files, and MUCH higher in progressive JPEGs. + If you use restarts, you may want to use larger intervals in those + cases. + +const jpeg_scan_info * scan_info +int num_scans + By default, scan_info is NULL; this causes the compressor to write a + single-scan sequential JPEG file. If not NULL, scan_info points to + an array of scan definition records of length num_scans. The + compressor will then write a JPEG file having one scan for each scan + definition record. This is used to generate noninterleaved or + progressive JPEG files. The library checks that the scan array + defines a valid JPEG scan sequence. (jpeg_simple_progression creates + a suitable scan definition array for progressive JPEG.) This is + discussed further under "Progressive JPEG support". + +boolean do_fancy_downsampling + If TRUE, use direct DCT scaling with DCT size > 8 for downsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate downsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_upsampling value in decompression. + +int smoothing_factor + If non-zero, the input image is smoothed; the value should be 1 for + minimal smoothing to 100 for maximum smoothing. Consult jcsample.c + for details of the smoothing algorithm. The default is zero. + +boolean write_JFIF_header + If TRUE, a JFIF APP0 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if a JFIF-legal JPEG color space + (ie, YCbCr or grayscale) is selected, otherwise FALSE. + +UINT8 JFIF_major_version +UINT8 JFIF_minor_version + The version number to be written into the JFIF marker. + jpeg_set_defaults() initializes the version to 1.01 (major=minor=1). + You should set it to 1.02 (major=1, minor=2) if you plan to write + any JFIF 1.02 extension markers. + +UINT8 density_unit +UINT16 X_density +UINT16 Y_density + The resolution information to be written into the JFIF marker; + not used otherwise. density_unit may be 0 for unknown, + 1 for dots/inch, or 2 for dots/cm. The default values are 0,1,1 + indicating square pixels of unknown size. + +boolean write_Adobe_marker + If TRUE, an Adobe APP14 marker is emitted. jpeg_set_defaults() and + jpeg_set_colorspace() set this TRUE if JPEG color space RGB, CMYK, + or YCCK is selected, otherwise FALSE. It is generally a bad idea + to set both write_JFIF_header and write_Adobe_marker. In fact, + you probably shouldn't change the default settings at all --- the + default behavior ensures that the JPEG file's color space can be + recognized by the decoder. + +JQUANT_TBL * quant_tbl_ptrs[NUM_QUANT_TBLS] + Pointers to coefficient quantization tables, one per table slot, + or NULL if no table is defined for a slot. Usually these should + be set via one of the above helper routines; jpeg_add_quant_table() + is general enough to define any quantization table. The other + routines will set up table slot 0 for luminance quality and table + slot 1 for chrominance. + +int q_scale_factor[NUM_QUANT_TBLS] + Linear quantization scaling factors (percentage, initialized 100) + for use with jpeg_default_qtables(). + See rdswitch.c and cjpeg.c for an example of usage. + Note that the q_scale_factor[] fields are the "linear" scales, so you + have to convert from user-defined ratings via jpeg_quality_scaling(). + Here is an example code which corresponds to cjpeg -quality 90,70: + + jpeg_set_defaults(cinfo); + + /* Set luminance quality 90. */ + cinfo->q_scale_factor[0] = jpeg_quality_scaling(90); + /* Set chrominance quality 70. */ + cinfo->q_scale_factor[1] = jpeg_quality_scaling(70); + + jpeg_default_qtables(cinfo, force_baseline); + + CAUTION: You must also set 1x1 subsampling for efficient separate + color quality selection, since the default value used by library + is 2x2: + + cinfo->comp_info[0].v_samp_factor = 1; + cinfo->comp_info[0].h_samp_factor = 1; + +JHUFF_TBL * dc_huff_tbl_ptrs[NUM_HUFF_TBLS] +JHUFF_TBL * ac_huff_tbl_ptrs[NUM_HUFF_TBLS] + Pointers to Huffman coding tables, one per table slot, or NULL if + no table is defined for a slot. Slots 0 and 1 are filled with the + JPEG sample tables by jpeg_set_defaults(). If you need to allocate + more table structures, jpeg_alloc_huff_table() may be used. + Note that optimal Huffman tables can be computed for an image + by setting optimize_coding, as discussed above; there's seldom + any need to mess with providing your own Huffman tables. + + +The actual dimensions of the JPEG image that will be written to the file are +given by the following fields. These are computed from the input image +dimensions and the compression parameters by jpeg_start_compress(). You can +also call jpeg_calc_jpeg_dimensions() to obtain the values that will result +from the current parameter settings. This can be useful if you are trying +to pick a scaling ratio that will get close to a desired target size. + +JDIMENSION jpeg_width Actual dimensions of output image. +JDIMENSION jpeg_height + + +Per-component parameters are stored in the struct cinfo.comp_info[i] for +component number i. Note that components here refer to components of the +JPEG color space, *not* the source image color space. A suitably large +comp_info[] array is allocated by jpeg_set_defaults(); if you choose not +to use that routine, it's up to you to allocate the array. + +int component_id + The one-byte identifier code to be recorded in the JPEG file for + this component. For the standard color spaces, we recommend you + leave the default values alone. + +int h_samp_factor +int v_samp_factor + Horizontal and vertical sampling factors for the component; must + be 1..4 according to the JPEG standard. Note that larger sampling + factors indicate a higher-resolution component; many people find + this behavior quite unintuitive. The default values are 2,2 for + luminance components and 1,1 for chrominance components, except + for grayscale where 1,1 is used. + +int quant_tbl_no + Quantization table number for component. The default value is + 0 for luminance components and 1 for chrominance components. + +int dc_tbl_no +int ac_tbl_no + DC and AC entropy coding table numbers. The default values are + 0 for luminance components and 1 for chrominance components. + +int component_index + Must equal the component's index in comp_info[]. (Beginning in + release v6, the compressor library will fill this in automatically; + you don't have to.) + + +Decompression parameter selection +--------------------------------- + +Decompression parameter selection is somewhat simpler than compression +parameter selection, since all of the JPEG internal parameters are +recorded in the source file and need not be supplied by the application. +(Unless you are working with abbreviated files, in which case see +"Abbreviated datastreams", below.) Decompression parameters control +the postprocessing done on the image to deliver it in a format suitable +for the application's use. Many of the parameters control speed/quality +tradeoffs, in which faster decompression may be obtained at the price of +a poorer-quality image. The defaults select the highest quality (slowest) +processing. + +The following fields in the JPEG object are set by jpeg_read_header() and +may be useful to the application in choosing decompression parameters: + +JDIMENSION image_width Width and height of image +JDIMENSION image_height +int num_components Number of color components +J_COLOR_SPACE jpeg_color_space Colorspace of image +boolean saw_JFIF_marker TRUE if a JFIF APP0 marker was seen + UINT8 JFIF_major_version Version information from JFIF marker + UINT8 JFIF_minor_version + UINT8 density_unit Resolution data from JFIF marker + UINT16 X_density + UINT16 Y_density +boolean saw_Adobe_marker TRUE if an Adobe APP14 marker was seen + UINT8 Adobe_transform Color transform code from Adobe marker + +The JPEG color space, unfortunately, is something of a guess since the JPEG +standard proper does not provide a way to record it. In practice most files +adhere to the JFIF or Adobe conventions, and the decoder will recognize these +correctly. See "Special color spaces", below, for more info. + + +The decompression parameters that determine the basic properties of the +returned image are: + +J_COLOR_SPACE out_color_space + Output color space. jpeg_read_header() sets an appropriate default + based on jpeg_color_space; typically it will be RGB or grayscale. + The application can change this field to request output in a different + colorspace. For example, set it to JCS_GRAYSCALE to get grayscale + output from a color file. (This is useful for previewing: grayscale + output is faster than full color since the color components need not + be processed.) Note that not all possible color space transforms are + currently implemented; you may need to extend jdcolor.c if you want an + unusual conversion. + +unsigned int scale_num, scale_denom + Scale the image by the fraction scale_num/scale_denom. Currently, + the supported scaling ratios are M/N with all M from 1 to 16, where + N is the source DCT size, which is 8 for baseline JPEG. (The library + design allows for arbitrary scaling ratios but this is not likely + to be implemented any time soon.) The values are initialized by + jpeg_read_header() with the source DCT size. For baseline JPEG + this is 8/8. If you change only the scale_num value while leaving + the other unchanged, then this specifies the DCT scaled size to be + applied on the given input. For baseline JPEG this is equivalent + to M/8 scaling, since the source DCT size for baseline JPEG is 8. + Smaller scaling ratios permit significantly faster decoding since + fewer pixels need be processed and a simpler IDCT method can be used. + +boolean quantize_colors + If set TRUE, colormapped output will be delivered. Default is FALSE, + meaning that full-color output will be delivered. + +The next three parameters are relevant only if quantize_colors is TRUE. + +int desired_number_of_colors + Maximum number of colors to use in generating a library-supplied color + map (the actual number of colors is returned in a different field). + Default 256. Ignored when the application supplies its own color map. + +boolean two_pass_quantize + If TRUE, an extra pass over the image is made to select a custom color + map for the image. This usually looks a lot better than the one-size- + fits-all colormap that is used otherwise. Default is TRUE. Ignored + when the application supplies its own color map. + +J_DITHER_MODE dither_mode + Selects color dithering method. Supported values are: + JDITHER_NONE no dithering: fast, very low quality + JDITHER_ORDERED ordered dither: moderate speed and quality + JDITHER_FS Floyd-Steinberg dither: slow, high quality + Default is JDITHER_FS. (At present, ordered dither is implemented + only in the single-pass, standard-colormap case. If you ask for + ordered dither when two_pass_quantize is TRUE or when you supply + an external color map, you'll get F-S dithering.) + +When quantize_colors is TRUE, the target color map is described by the next +two fields. colormap is set to NULL by jpeg_read_header(). The application +can supply a color map by setting colormap non-NULL and setting +actual_number_of_colors to the map size. Otherwise, jpeg_start_decompress() +selects a suitable color map and sets these two fields itself. +[Implementation restriction: at present, an externally supplied colormap is +only accepted for 3-component output color spaces.] + +JSAMPARRAY colormap + The color map, represented as a 2-D pixel array of out_color_components + rows and actual_number_of_colors columns. Ignored if not quantizing. + CAUTION: if the JPEG library creates its own colormap, the storage + pointed to by this field is released by jpeg_finish_decompress(). + Copy the colormap somewhere else first, if you want to save it. + +int actual_number_of_colors + The number of colors in the color map. + +Additional decompression parameters that the application may set include: + +J_DCT_METHOD dct_method + Selects the algorithm used for the DCT step. Choices are the same + as described above for compression. + +boolean do_fancy_upsampling + If TRUE, use direct DCT scaling with DCT size > 8 for upsampling + of chroma components. + If FALSE, use only DCT size <= 8 and simple separate upsampling. + Default is TRUE. + For better image stability in multiple generation compression cycles + it is preferable that this value matches the corresponding + do_fancy_downsampling value in compression. + +boolean do_block_smoothing + If TRUE, interblock smoothing is applied in early stages of decoding + progressive JPEG files; if FALSE, not. Default is TRUE. Early + progression stages look "fuzzy" with smoothing, "blocky" without. + In any case, block smoothing ceases to be applied after the first few + AC coefficients are known to full accuracy, so it is relevant only + when using buffered-image mode for progressive images. + +boolean enable_1pass_quant +boolean enable_external_quant +boolean enable_2pass_quant + These are significant only in buffered-image mode, which is + described in its own section below. + + +The output image dimensions are given by the following fields. These are +computed from the source image dimensions and the decompression parameters +by jpeg_start_decompress(). You can also call jpeg_calc_output_dimensions() +to obtain the values that will result from the current parameter settings. +This can be useful if you are trying to pick a scaling ratio that will get +close to a desired target size. It's also important if you are using the +JPEG library's memory manager to allocate output buffer space, because you +are supposed to request such buffers *before* jpeg_start_decompress(). + +JDIMENSION output_width Actual dimensions of output image. +JDIMENSION output_height +int out_color_components Number of color components in out_color_space. +int output_components Number of color components returned. +int rec_outbuf_height Recommended height of scanline buffer. + +When quantizing colors, output_components is 1, indicating a single color map +index per pixel. Otherwise it equals out_color_components. The output arrays +are required to be output_width * output_components JSAMPLEs wide. + +rec_outbuf_height is the recommended minimum height (in scanlines) of the +buffer passed to jpeg_read_scanlines(). If the buffer is smaller, the +library will still work, but time will be wasted due to unnecessary data +copying. In high-quality modes, rec_outbuf_height is always 1, but some +faster, lower-quality modes set it to larger values (typically 2 to 4). +If you are going to ask for a high-speed processing mode, you may as well +go to the trouble of honoring rec_outbuf_height so as to avoid data copying. +(An output buffer larger than rec_outbuf_height lines is OK, but won't +provide any material speed improvement over that height.) + + +Special color spaces +-------------------- + +The JPEG standard itself is "color blind" and doesn't specify any particular +color space. It is customary to convert color data to a luminance/chrominance +color space before compressing, since this permits greater compression. The +existing de-facto JPEG file format standards specify YCbCr or grayscale data +(JFIF), or grayscale, RGB, YCbCr, CMYK, or YCCK (Adobe). For special +applications such as multispectral images, other color spaces can be used, +but it must be understood that such files will be unportable. + +The JPEG library can handle the most common colorspace conversions (namely +RGB <=> YCbCr and CMYK <=> YCCK). It can also deal with data of an unknown +color space, passing it through without conversion. If you deal extensively +with an unusual color space, you can easily extend the library to understand +additional color spaces and perform appropriate conversions. + +For compression, the source data's color space is specified by field +in_color_space. This is transformed to the JPEG file's color space given +by jpeg_color_space. jpeg_set_defaults() chooses a reasonable JPEG color +space depending on in_color_space, but you can override this by calling +jpeg_set_colorspace(). Of course you must select a supported transformation. +jccolor.c currently supports the following transformations: + RGB => YCbCr + RGB => GRAYSCALE + YCbCr => GRAYSCALE + CMYK => YCCK +plus the null transforms: GRAYSCALE => GRAYSCALE, RGB => RGB, +YCbCr => YCbCr, CMYK => CMYK, YCCK => YCCK, and UNKNOWN => UNKNOWN. + +The de-facto file format standards (JFIF and Adobe) specify APPn markers that +indicate the color space of the JPEG file. It is important to ensure that +these are written correctly, or omitted if the JPEG file's color space is not +one of the ones supported by the de-facto standards. jpeg_set_colorspace() +will set the compression parameters to include or omit the APPn markers +properly, so long as it is told the truth about the JPEG color space. +For example, if you are writing some random 3-component color space without +conversion, don't try to fake out the library by setting in_color_space and +jpeg_color_space to JCS_YCbCr; use JCS_UNKNOWN. You may want to write an +APPn marker of your own devising to identify the colorspace --- see "Special +markers", below. + +When told that the color space is UNKNOWN, the library will default to using +luminance-quality compression parameters for all color components. You may +well want to change these parameters. See the source code for +jpeg_set_colorspace(), in jcparam.c, for details. + +For decompression, the JPEG file's color space is given in jpeg_color_space, +and this is transformed to the output color space out_color_space. +jpeg_read_header's setting of jpeg_color_space can be relied on if the file +conforms to JFIF or Adobe conventions, but otherwise it is no better than a +guess. If you know the JPEG file's color space for certain, you can override +jpeg_read_header's guess by setting jpeg_color_space. jpeg_read_header also +selects a default output color space based on (its guess of) jpeg_color_space; +set out_color_space to override this. Again, you must select a supported +transformation. jdcolor.c currently supports + YCbCr => GRAYSCALE + YCbCr => RGB + GRAYSCALE => RGB + YCCK => CMYK +as well as the null transforms. (Since GRAYSCALE=>RGB is provided, an +application can force grayscale JPEGs to look like color JPEGs if it only +wants to handle one case.) + +The two-pass color quantizer, jquant2.c, is specialized to handle RGB data +(it weights distances appropriately for RGB colors). You'll need to modify +the code if you want to use it for non-RGB output color spaces. Note that +jquant2.c is used to map to an application-supplied colormap as well as for +the normal two-pass colormap selection process. + +CAUTION: it appears that Adobe Photoshop writes inverted data in CMYK JPEG +files: 0 represents 100% ink coverage, rather than 0% ink as you'd expect. +This is arguably a bug in Photoshop, but if you need to work with Photoshop +CMYK files, you will have to deal with it in your application. We cannot +"fix" this in the library by inverting the data during the CMYK<=>YCCK +transform, because that would break other applications, notably Ghostscript. +Photoshop versions prior to 3.0 write EPS files containing JPEG-encoded CMYK +data in the same inverted-YCCK representation used in bare JPEG files, but +the surrounding PostScript code performs an inversion using the PS image +operator. I am told that Photoshop 3.0 will write uninverted YCCK in +EPS/JPEG files, and will omit the PS-level inversion. (But the data +polarity used in bare JPEG files will not change in 3.0.) In either case, +the JPEG library must not invert the data itself, or else Ghostscript would +read these EPS files incorrectly. + + +Error handling +-------------- + +When the default error handler is used, any error detected inside the JPEG +routines will cause a message to be printed on stderr, followed by exit(). +You can supply your own error handling routines to override this behavior +and to control the treatment of nonfatal warnings and trace/debug messages. +The file example.c illustrates the most common case, which is to have the +application regain control after an error rather than exiting. + +The JPEG library never writes any message directly; it always goes through +the error handling routines. Three classes of messages are recognized: + * Fatal errors: the library cannot continue. + * Warnings: the library can continue, but the data is corrupt, and a + damaged output image is likely to result. + * Trace/informational messages. These come with a trace level indicating + the importance of the message; you can control the verbosity of the + program by adjusting the maximum trace level that will be displayed. + +You may, if you wish, simply replace the entire JPEG error handling module +(jerror.c) with your own code. However, you can avoid code duplication by +only replacing some of the routines depending on the behavior you need. +This is accomplished by calling jpeg_std_error() as usual, but then overriding +some of the method pointers in the jpeg_error_mgr struct, as illustrated by +example.c. + +All of the error handling routines will receive a pointer to the JPEG object +(a j_common_ptr which points to either a jpeg_compress_struct or a +jpeg_decompress_struct; if you need to tell which, test the is_decompressor +field). This struct includes a pointer to the error manager struct in its +"err" field. Frequently, custom error handler routines will need to access +additional data which is not known to the JPEG library or the standard error +handler. The most convenient way to do this is to embed either the JPEG +object or the jpeg_error_mgr struct in a larger structure that contains +additional fields; then casting the passed pointer provides access to the +additional fields. Again, see example.c for one way to do it. (Beginning +with IJG version 6b, there is also a void pointer "client_data" in each +JPEG object, which the application can also use to find related data. +The library does not touch client_data at all.) + +The individual methods that you might wish to override are: + +error_exit (j_common_ptr cinfo) + Receives control for a fatal error. Information sufficient to + generate the error message has been stored in cinfo->err; call + output_message to display it. Control must NOT return to the caller; + generally this routine will exit() or longjmp() somewhere. + Typically you would override this routine to get rid of the exit() + default behavior. Note that if you continue processing, you should + clean up the JPEG object with jpeg_abort() or jpeg_destroy(). + +output_message (j_common_ptr cinfo) + Actual output of any JPEG message. Override this to send messages + somewhere other than stderr. Note that this method does not know + how to generate a message, only where to send it. + +format_message (j_common_ptr cinfo, char * buffer) + Constructs a readable error message string based on the error info + stored in cinfo->err. This method is called by output_message. Few + applications should need to override this method. One possible + reason for doing so is to implement dynamic switching of error message + language. + +emit_message (j_common_ptr cinfo, int msg_level) + Decide whether or not to emit a warning or trace message; if so, + calls output_message. The main reason for overriding this method + would be to abort on warnings. msg_level is -1 for warnings, + 0 and up for trace messages. + +Only error_exit() and emit_message() are called from the rest of the JPEG +library; the other two are internal to the error handler. + +The actual message texts are stored in an array of strings which is pointed to +by the field err->jpeg_message_table. The messages are numbered from 0 to +err->last_jpeg_message, and it is these code numbers that are used in the +JPEG library code. You could replace the message texts (for instance, with +messages in French or German) by changing the message table pointer. See +jerror.h for the default texts. CAUTION: this table will almost certainly +change or grow from one library version to the next. + +It may be useful for an application to add its own message texts that are +handled by the same mechanism. The error handler supports a second "add-on" +message table for this purpose. To define an addon table, set the pointer +err->addon_message_table and the message numbers err->first_addon_message and +err->last_addon_message. If you number the addon messages beginning at 1000 +or so, you won't have to worry about conflicts with the library's built-in +messages. See the sample applications cjpeg/djpeg for an example of using +addon messages (the addon messages are defined in cderror.h). + +Actual invocation of the error handler is done via macros defined in jerror.h: + ERREXITn(...) for fatal errors + WARNMSn(...) for corrupt-data warnings + TRACEMSn(...) for trace and informational messages. +These macros store the message code and any additional parameters into the +error handler struct, then invoke the error_exit() or emit_message() method. +The variants of each macro are for varying numbers of additional parameters. +The additional parameters are inserted into the generated message using +standard printf() format codes. + +See jerror.h and jerror.c for further details. + + +Compressed data handling (source and destination managers) +---------------------------------------------------------- + +The JPEG compression library sends its compressed data to a "destination +manager" module. The default destination manager just writes the data to a +memory buffer or to a stdio stream, but you can provide your own manager to +do something else. Similarly, the decompression library calls a "source +manager" to obtain the compressed data; you can provide your own source +manager if you want the data to come from somewhere other than a memory +buffer or a stdio stream. + +In both cases, compressed data is processed a bufferload at a time: the +destination or source manager provides a work buffer, and the library invokes +the manager only when the buffer is filled or emptied. (You could define a +one-character buffer to force the manager to be invoked for each byte, but +that would be rather inefficient.) The buffer's size and location are +controlled by the manager, not by the library. For example, the memory +source manager just makes the buffer pointer and length point to the original +data in memory. In this case the buffer-reload procedure will be invoked +only if the decompressor ran off the end of the datastream, which would +indicate an erroneous datastream. + +The work buffer is defined as an array of datatype JOCTET, which is generally +"char" or "unsigned char". On a machine where char is not exactly 8 bits +wide, you must define JOCTET as a wider data type and then modify the data +source and destination modules to transcribe the work arrays into 8-bit units +on external storage. + +A data destination manager struct contains a pointer and count defining the +next byte to write in the work buffer and the remaining free space: + + JOCTET * next_output_byte; /* => next byte to write in buffer */ + size_t free_in_buffer; /* # of byte spaces remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is filled. The manager's empty_output_buffer method must reset the pointer +and count. The manager is expected to remember the buffer's starting address +and total size in private fields not visible to the library. + +A data destination manager provides three methods: + +init_destination (j_compress_ptr cinfo) + Initialize destination. This is called by jpeg_start_compress() + before any data is actually written. It must initialize + next_output_byte and free_in_buffer. free_in_buffer must be + initialized to a positive value. + +empty_output_buffer (j_compress_ptr cinfo) + This is called whenever the buffer has filled (free_in_buffer + reaches zero). In typical applications, it should write out the + *entire* buffer (use the saved start address and buffer length; + ignore the current state of next_output_byte and free_in_buffer). + Then reset the pointer & count to the start of the buffer, and + return TRUE indicating that the buffer has been dumped. + free_in_buffer must be set to a positive value when TRUE is + returned. A FALSE return should only be used when I/O suspension is + desired (this operating mode is discussed in the next section). + +term_destination (j_compress_ptr cinfo) + Terminate destination --- called by jpeg_finish_compress() after all + data has been written. In most applications, this must flush any + data remaining in the buffer. Use either next_output_byte or + free_in_buffer to determine how much data is in the buffer. + +term_destination() is NOT called by jpeg_abort() or jpeg_destroy(). If you +want the destination manager to be cleaned up during an abort, you must do it +yourself. + +You will also need code to create a jpeg_destination_mgr struct, fill in its +method pointers, and insert a pointer to the struct into the "dest" field of +the JPEG compression object. This can be done in-line in your setup code if +you like, but it's probably cleaner to provide a separate routine similar to +the jpeg_stdio_dest() or jpeg_mem_dest() routines of the supplied destination +managers. + +Decompression source managers follow a parallel design, but with some +additional frammishes. The source manager struct contains a pointer and count +defining the next byte to read from the work buffer and the number of bytes +remaining: + + const JOCTET * next_input_byte; /* => next byte to read from buffer */ + size_t bytes_in_buffer; /* # of bytes remaining in buffer */ + +The library increments the pointer and decrements the count until the buffer +is emptied. The manager's fill_input_buffer method must reset the pointer and +count. In most applications, the manager must remember the buffer's starting +address and total size in private fields not visible to the library. + +A data source manager provides five methods: + +init_source (j_decompress_ptr cinfo) + Initialize source. This is called by jpeg_read_header() before any + data is actually read. Unlike init_destination(), it may leave + bytes_in_buffer set to 0 (in which case a fill_input_buffer() call + will occur immediately). + +fill_input_buffer (j_decompress_ptr cinfo) + This is called whenever bytes_in_buffer has reached zero and more + data is wanted. In typical applications, it should read fresh data + into the buffer (ignoring the current state of next_input_byte and + bytes_in_buffer), reset the pointer & count to the start of the + buffer, and return TRUE indicating that the buffer has been reloaded. + It is not necessary to fill the buffer entirely, only to obtain at + least one more byte. bytes_in_buffer MUST be set to a positive value + if TRUE is returned. A FALSE return should only be used when I/O + suspension is desired (this mode is discussed in the next section). + +skip_input_data (j_decompress_ptr cinfo, long num_bytes) + Skip num_bytes worth of data. The buffer pointer and count should + be advanced over num_bytes input bytes, refilling the buffer as + needed. This is used to skip over a potentially large amount of + uninteresting data (such as an APPn marker). In some applications + it may be possible to optimize away the reading of the skipped data, + but it's not clear that being smart is worth much trouble; large + skips are uncommon. bytes_in_buffer may be zero on return. + A zero or negative skip count should be treated as a no-op. + +resync_to_restart (j_decompress_ptr cinfo, int desired) + This routine is called only when the decompressor has failed to find + a restart (RSTn) marker where one is expected. Its mission is to + find a suitable point for resuming decompression. For most + applications, we recommend that you just use the default resync + procedure, jpeg_resync_to_restart(). However, if you are able to back + up in the input data stream, or if you have a-priori knowledge about + the likely location of restart markers, you may be able to do better. + Read the read_restart_marker() and jpeg_resync_to_restart() routines + in jdmarker.c if you think you'd like to implement your own resync + procedure. + +term_source (j_decompress_ptr cinfo) + Terminate source --- called by jpeg_finish_decompress() after all + data has been read. Often a no-op. + +For both fill_input_buffer() and skip_input_data(), there is no such thing +as an EOF return. If the end of the file has been reached, the routine has +a choice of exiting via ERREXIT() or inserting fake data into the buffer. +In most cases, generating a warning message and inserting a fake EOI marker +is the best course of action --- this will allow the decompressor to output +however much of the image is there. In pathological cases, the decompressor +may swallow the EOI and again demand data ... just keep feeding it fake EOIs. +jdatasrc.c illustrates the recommended error recovery behavior. + +term_source() is NOT called by jpeg_abort() or jpeg_destroy(). If you want +the source manager to be cleaned up during an abort, you must do it yourself. + +You will also need code to create a jpeg_source_mgr struct, fill in its method +pointers, and insert a pointer to the struct into the "src" field of the JPEG +decompression object. This can be done in-line in your setup code if you +like, but it's probably cleaner to provide a separate routine similar to the +jpeg_stdio_src() or jpeg_mem_src() routines of the supplied source managers. + +For more information, consult the memory and stdio source and destination +managers in jdatasrc.c and jdatadst.c. + + +I/O suspension +-------------- + +Some applications need to use the JPEG library as an incremental memory-to- +memory filter: when the compressed data buffer is filled or emptied, they want +control to return to the outer loop, rather than expecting that the buffer can +be emptied or reloaded within the data source/destination manager subroutine. +The library supports this need by providing an "I/O suspension" mode, which we +describe in this section. + +The I/O suspension mode is not a panacea: nothing is guaranteed about the +maximum amount of time spent in any one call to the library, so it will not +eliminate response-time problems in single-threaded applications. If you +need guaranteed response time, we suggest you "bite the bullet" and implement +a real multi-tasking capability. + +To use I/O suspension, cooperation is needed between the calling application +and the data source or destination manager; you will always need a custom +source/destination manager. (Please read the previous section if you haven't +already.) The basic idea is that the empty_output_buffer() or +fill_input_buffer() routine is a no-op, merely returning FALSE to indicate +that it has done nothing. Upon seeing this, the JPEG library suspends +operation and returns to its caller. The surrounding application is +responsible for emptying or refilling the work buffer before calling the +JPEG library again. + +Compression suspension: + +For compression suspension, use an empty_output_buffer() routine that returns +FALSE; typically it will not do anything else. This will cause the +compressor to return to the caller of jpeg_write_scanlines(), with the return +value indicating that not all the supplied scanlines have been accepted. +The application must make more room in the output buffer, adjust the output +buffer pointer/count appropriately, and then call jpeg_write_scanlines() +again, pointing to the first unconsumed scanline. + +When forced to suspend, the compressor will backtrack to a convenient stopping +point (usually the start of the current MCU); it will regenerate some output +data when restarted. Therefore, although empty_output_buffer() is only +called when the buffer is filled, you should NOT write out the entire buffer +after a suspension. Write only the data up to the current position of +next_output_byte/free_in_buffer. The data beyond that point will be +regenerated after resumption. + +Because of the backtracking behavior, a good-size output buffer is essential +for efficiency; you don't want the compressor to suspend often. (In fact, an +overly small buffer could lead to infinite looping, if a single MCU required +more data than would fit in the buffer.) We recommend a buffer of at least +several Kbytes. You may want to insert explicit code to ensure that you don't +call jpeg_write_scanlines() unless there is a reasonable amount of space in +the output buffer; in other words, flush the buffer before trying to compress +more data. + +The compressor does not allow suspension while it is trying to write JPEG +markers at the beginning and end of the file. This means that: + * At the beginning of a compression operation, there must be enough free + space in the output buffer to hold the header markers (typically 600 or + so bytes). The recommended buffer size is bigger than this anyway, so + this is not a problem as long as you start with an empty buffer. However, + this restriction might catch you if you insert large special markers, such + as a JFIF thumbnail image, without flushing the buffer afterwards. + * When you call jpeg_finish_compress(), there must be enough space in the + output buffer to emit any buffered data and the final EOI marker. In the + current implementation, half a dozen bytes should suffice for this, but + for safety's sake we recommend ensuring that at least 100 bytes are free + before calling jpeg_finish_compress(). + +A more significant restriction is that jpeg_finish_compress() cannot suspend. +This means you cannot use suspension with multi-pass operating modes, namely +Huffman code optimization and multiple-scan output. Those modes write the +whole file during jpeg_finish_compress(), which will certainly result in +buffer overrun. (Note that this restriction applies only to compression, +not decompression. The decompressor supports input suspension in all of its +operating modes.) + +Decompression suspension: + +For decompression suspension, use a fill_input_buffer() routine that simply +returns FALSE (except perhaps during error recovery, as discussed below). +This will cause the decompressor to return to its caller with an indication +that suspension has occurred. This can happen at four places: + * jpeg_read_header(): will return JPEG_SUSPENDED. + * jpeg_start_decompress(): will return FALSE, rather than its usual TRUE. + * jpeg_read_scanlines(): will return the number of scanlines already + completed (possibly 0). + * jpeg_finish_decompress(): will return FALSE, rather than its usual TRUE. +The surrounding application must recognize these cases, load more data into +the input buffer, and repeat the call. In the case of jpeg_read_scanlines(), +increment the passed pointers past any scanlines successfully read. + +Just as with compression, the decompressor will typically backtrack to a +convenient restart point before suspending. When fill_input_buffer() is +called, next_input_byte/bytes_in_buffer point to the current restart point, +which is where the decompressor will backtrack to if FALSE is returned. +The data beyond that position must NOT be discarded if you suspend; it needs +to be re-read upon resumption. In most implementations, you'll need to shift +this data down to the start of your work buffer and then load more data after +it. Again, this behavior means that a several-Kbyte work buffer is essential +for decent performance; furthermore, you should load a reasonable amount of +new data before resuming decompression. (If you loaded, say, only one new +byte each time around, you could waste a LOT of cycles.) + +The skip_input_data() source manager routine requires special care in a +suspension scenario. This routine is NOT granted the ability to suspend the +decompressor; it can decrement bytes_in_buffer to zero, but no more. If the +requested skip distance exceeds the amount of data currently in the input +buffer, then skip_input_data() must set bytes_in_buffer to zero and record the +additional skip distance somewhere else. The decompressor will immediately +call fill_input_buffer(), which should return FALSE, which will cause a +suspension return. The surrounding application must then arrange to discard +the recorded number of bytes before it resumes loading the input buffer. +(Yes, this design is rather baroque, but it avoids complexity in the far more +common case where a non-suspending source manager is used.) + +If the input data has been exhausted, we recommend that you emit a warning +and insert dummy EOI markers just as a non-suspending data source manager +would do. This can be handled either in the surrounding application logic or +within fill_input_buffer(); the latter is probably more efficient. If +fill_input_buffer() knows that no more data is available, it can set the +pointer/count to point to a dummy EOI marker and then return TRUE just as +though it had read more data in a non-suspending situation. + +The decompressor does not attempt to suspend within standard JPEG markers; +instead it will backtrack to the start of the marker and reprocess the whole +marker next time. Hence the input buffer must be large enough to hold the +longest standard marker in the file. Standard JPEG markers should normally +not exceed a few hundred bytes each (DHT tables are typically the longest). +We recommend at least a 2K buffer for performance reasons, which is much +larger than any correct marker is likely to be. For robustness against +damaged marker length counts, you may wish to insert a test in your +application for the case that the input buffer is completely full and yet +the decoder has suspended without consuming any data --- otherwise, if this +situation did occur, it would lead to an endless loop. (The library can't +provide this test since it has no idea whether "the buffer is full", or +even whether there is a fixed-size input buffer.) + +The input buffer would need to be 64K to allow for arbitrary COM or APPn +markers, but these are handled specially: they are either saved into allocated +memory, or skipped over by calling skip_input_data(). In the former case, +suspension is handled correctly, and in the latter case, the problem of +buffer overrun is placed on skip_input_data's shoulders, as explained above. +Note that if you provide your own marker handling routine for large markers, +you should consider how to deal with buffer overflow. + +Multiple-buffer management: + +In some applications it is desirable to store the compressed data in a linked +list of buffer areas, so as to avoid data copying. This can be handled by +having empty_output_buffer() or fill_input_buffer() set the pointer and count +to reference the next available buffer; FALSE is returned only if no more +buffers are available. Although seemingly straightforward, there is a +pitfall in this approach: the backtrack that occurs when FALSE is returned +could back up into an earlier buffer. For example, when fill_input_buffer() +is called, the current pointer & count indicate the backtrack restart point. +Since fill_input_buffer() will set the pointer and count to refer to a new +buffer, the restart position must be saved somewhere else. Suppose a second +call to fill_input_buffer() occurs in the same library call, and no +additional input data is available, so fill_input_buffer must return FALSE. +If the JPEG library has not moved the pointer/count forward in the current +buffer, then *the correct restart point is the saved position in the prior +buffer*. Prior buffers may be discarded only after the library establishes +a restart point within a later buffer. Similar remarks apply for output into +a chain of buffers. + +The library will never attempt to backtrack over a skip_input_data() call, +so any skipped data can be permanently discarded. You still have to deal +with the case of skipping not-yet-received data, however. + +It's much simpler to use only a single buffer; when fill_input_buffer() is +called, move any unconsumed data (beyond the current pointer/count) down to +the beginning of this buffer and then load new data into the remaining buffer +space. This approach requires a little more data copying but is far easier +to get right. + + +Progressive JPEG support +------------------------ + +Progressive JPEG rearranges the stored data into a series of scans of +increasing quality. In situations where a JPEG file is transmitted across a +slow communications link, a decoder can generate a low-quality image very +quickly from the first scan, then gradually improve the displayed quality as +more scans are received. The final image after all scans are complete is +identical to that of a regular (sequential) JPEG file of the same quality +setting. Progressive JPEG files are often slightly smaller than equivalent +sequential JPEG files, but the possibility of incremental display is the main +reason for using progressive JPEG. + +The IJG encoder library generates progressive JPEG files when given a +suitable "scan script" defining how to divide the data into scans. +Creation of progressive JPEG files is otherwise transparent to the encoder. +Progressive JPEG files can also be read transparently by the decoder library. +If the decoding application simply uses the library as defined above, it +will receive a final decoded image without any indication that the file was +progressive. Of course, this approach does not allow incremental display. +To perform incremental display, an application needs to use the decoder +library's "buffered-image" mode, in which it receives a decoded image +multiple times. + +Each displayed scan requires about as much work to decode as a full JPEG +image of the same size, so the decoder must be fairly fast in relation to the +data transmission rate in order to make incremental display useful. However, +it is possible to skip displaying the image and simply add the incoming bits +to the decoder's coefficient buffer. This is fast because only Huffman +decoding need be done, not IDCT, upsampling, colorspace conversion, etc. +The IJG decoder library allows the application to switch dynamically between +displaying the image and simply absorbing the incoming bits. A properly +coded application can automatically adapt the number of display passes to +suit the time available as the image is received. Also, a final +higher-quality display cycle can be performed from the buffered data after +the end of the file is reached. + +Progressive compression: + +To create a progressive JPEG file (or a multiple-scan sequential JPEG file), +set the scan_info cinfo field to point to an array of scan descriptors, and +perform compression as usual. Instead of constructing your own scan list, +you can call the jpeg_simple_progression() helper routine to create a +recommended progression sequence; this method should be used by all +applications that don't want to get involved in the nitty-gritty of +progressive scan sequence design. (If you want to provide user control of +scan sequences, you may wish to borrow the scan script reading code found +in rdswitch.c, so that you can read scan script files just like cjpeg's.) +When scan_info is not NULL, the compression library will store DCT'd data +into a buffer array as jpeg_write_scanlines() is called, and will emit all +the requested scans during jpeg_finish_compress(). This implies that +multiple-scan output cannot be created with a suspending data destination +manager, since jpeg_finish_compress() does not support suspension. We +should also note that the compressor currently forces Huffman optimization +mode when creating a progressive JPEG file, because the default Huffman +tables are unsuitable for progressive files. + +Progressive decompression: + +When buffered-image mode is not used, the decoder library will read all of +a multi-scan file during jpeg_start_decompress(), so that it can provide a +final decoded image. (Here "multi-scan" means either progressive or +multi-scan sequential.) This makes multi-scan files transparent to the +decoding application. However, existing applications that used suspending +input with version 5 of the IJG library will need to be modified to check +for a suspension return from jpeg_start_decompress(). + +To perform incremental display, an application must use the library's +buffered-image mode. This is described in the next section. + + +Buffered-image mode +------------------- + +In buffered-image mode, the library stores the partially decoded image in a +coefficient buffer, from which it can be read out as many times as desired. +This mode is typically used for incremental display of progressive JPEG files, +but it can be used with any JPEG file. Each scan of a progressive JPEG file +adds more data (more detail) to the buffered image. The application can +display in lockstep with the source file (one display pass per input scan), +or it can allow input processing to outrun display processing. By making +input and display processing run independently, it is possible for the +application to adapt progressive display to a wide range of data transmission +rates. + +The basic control flow for buffered-image decoding is + + jpeg_create_decompress() + set data source + jpeg_read_header() + set overall decompression parameters + cinfo.buffered_image = TRUE; /* select buffered-image mode */ + jpeg_start_decompress() + for (each output pass) { + adjust output decompression parameters if required + jpeg_start_output() /* start a new output pass */ + for (all scanlines in image) { + jpeg_read_scanlines() + display scanlines + } + jpeg_finish_output() /* terminate output pass */ + } + jpeg_finish_decompress() + jpeg_destroy_decompress() + +This differs from ordinary unbuffered decoding in that there is an additional +level of looping. The application can choose how many output passes to make +and how to display each pass. + +The simplest approach to displaying progressive images is to do one display +pass for each scan appearing in the input file. In this case the outer loop +condition is typically + while (! jpeg_input_complete(&cinfo)) +and the start-output call should read + jpeg_start_output(&cinfo, cinfo.input_scan_number); +The second parameter to jpeg_start_output() indicates which scan of the input +file is to be displayed; the scans are numbered starting at 1 for this +purpose. (You can use a loop counter starting at 1 if you like, but using +the library's input scan counter is easier.) The library automatically reads +data as necessary to complete each requested scan, and jpeg_finish_output() +advances to the next scan or end-of-image marker (hence input_scan_number +will be incremented by the time control arrives back at jpeg_start_output()). +With this technique, data is read from the input file only as needed, and +input and output processing run in lockstep. + +After reading the final scan and reaching the end of the input file, the +buffered image remains available; it can be read additional times by +repeating the jpeg_start_output()/jpeg_read_scanlines()/jpeg_finish_output() +sequence. For example, a useful technique is to use fast one-pass color +quantization for display passes made while the image is arriving, followed by +a final display pass using two-pass quantization for highest quality. This +is done by changing the library parameters before the final output pass. +Changing parameters between passes is discussed in detail below. + +In general the last scan of a progressive file cannot be recognized as such +until after it is read, so a post-input display pass is the best approach if +you want special processing in the final pass. + +When done with the image, be sure to call jpeg_finish_decompress() to release +the buffered image (or just use jpeg_destroy_decompress()). + +If input data arrives faster than it can be displayed, the application can +cause the library to decode input data in advance of what's needed to produce +output. This is done by calling the routine jpeg_consume_input(). +The return value is one of the following: + JPEG_REACHED_SOS: reached an SOS marker (the start of a new scan) + JPEG_REACHED_EOI: reached the EOI marker (end of image) + JPEG_ROW_COMPLETED: completed reading one MCU row of compressed data + JPEG_SCAN_COMPLETED: completed reading last MCU row of current scan + JPEG_SUSPENDED: suspended before completing any of the above +(JPEG_SUSPENDED can occur only if a suspending data source is used.) This +routine can be called at any time after initializing the JPEG object. It +reads some additional data and returns when one of the indicated significant +events occurs. (If called after the EOI marker is reached, it will +immediately return JPEG_REACHED_EOI without attempting to read more data.) + +The library's output processing will automatically call jpeg_consume_input() +whenever the output processing overtakes the input; thus, simple lockstep +display requires no direct calls to jpeg_consume_input(). But by adding +calls to jpeg_consume_input(), you can absorb data in advance of what is +being displayed. This has two benefits: + * You can limit buildup of unprocessed data in your input buffer. + * You can eliminate extra display passes by paying attention to the + state of the library's input processing. + +The first of these benefits only requires interspersing calls to +jpeg_consume_input() with your display operations and any other processing +you may be doing. To avoid wasting cycles due to backtracking, it's best to +call jpeg_consume_input() only after a hundred or so new bytes have arrived. +This is discussed further under "I/O suspension", above. (Note: the JPEG +library currently is not thread-safe. You must not call jpeg_consume_input() +from one thread of control if a different library routine is working on the +same JPEG object in another thread.) + +When input arrives fast enough that more than one new scan is available +before you start a new output pass, you may as well skip the output pass +corresponding to the completed scan. This occurs for free if you pass +cinfo.input_scan_number as the target scan number to jpeg_start_output(). +The input_scan_number field is simply the index of the scan currently being +consumed by the input processor. You can ensure that this is up-to-date by +emptying the input buffer just before calling jpeg_start_output(): call +jpeg_consume_input() repeatedly until it returns JPEG_SUSPENDED or +JPEG_REACHED_EOI. + +The target scan number passed to jpeg_start_output() is saved in the +cinfo.output_scan_number field. The library's output processing calls +jpeg_consume_input() whenever the current input scan number and row within +that scan is less than or equal to the current output scan number and row. +Thus, input processing can "get ahead" of the output processing but is not +allowed to "fall behind". You can achieve several different effects by +manipulating this interlock rule. For example, if you pass a target scan +number greater than the current input scan number, the output processor will +wait until that scan starts to arrive before producing any output. (To avoid +an infinite loop, the target scan number is automatically reset to the last +scan number when the end of image is reached. Thus, if you specify a large +target scan number, the library will just absorb the entire input file and +then perform an output pass. This is effectively the same as what +jpeg_start_decompress() does when you don't select buffered-image mode.) +When you pass a target scan number equal to the current input scan number, +the image is displayed no faster than the current input scan arrives. The +final possibility is to pass a target scan number less than the current input +scan number; this disables the input/output interlock and causes the output +processor to simply display whatever it finds in the image buffer, without +waiting for input. (However, the library will not accept a target scan +number less than one, so you can't avoid waiting for the first scan.) + +When data is arriving faster than the output display processing can advance +through the image, jpeg_consume_input() will store data into the buffered +image beyond the point at which the output processing is reading data out +again. If the input arrives fast enough, it may "wrap around" the buffer to +the point where the input is more than one whole scan ahead of the output. +If the output processing simply proceeds through its display pass without +paying attention to the input, the effect seen on-screen is that the lower +part of the image is one or more scans better in quality than the upper part. +Then, when the next output scan is started, you have a choice of what target +scan number to use. The recommended choice is to use the current input scan +number at that time, which implies that you've skipped the output scans +corresponding to the input scans that were completed while you processed the +previous output scan. In this way, the decoder automatically adapts its +speed to the arriving data, by skipping output scans as necessary to keep up +with the arriving data. + +When using this strategy, you'll want to be sure that you perform a final +output pass after receiving all the data; otherwise your last display may not +be full quality across the whole screen. So the right outer loop logic is +something like this: + do { + absorb any waiting input by calling jpeg_consume_input() + final_pass = jpeg_input_complete(&cinfo); + adjust output decompression parameters if required + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + } while (! final_pass); +rather than quitting as soon as jpeg_input_complete() returns TRUE. This +arrangement makes it simple to use higher-quality decoding parameters +for the final pass. But if you don't want to use special parameters for +the final pass, the right loop logic is like this: + for (;;) { + absorb any waiting input by calling jpeg_consume_input() + jpeg_start_output(&cinfo, cinfo.input_scan_number); + ... + jpeg_finish_output() + if (jpeg_input_complete(&cinfo) && + cinfo.input_scan_number == cinfo.output_scan_number) + break; + } +In this case you don't need to know in advance whether an output pass is to +be the last one, so it's not necessary to have reached EOF before starting +the final output pass; rather, what you want to test is whether the output +pass was performed in sync with the final input scan. This form of the loop +will avoid an extra output pass whenever the decoder is able (or nearly able) +to keep up with the incoming data. + +When the data transmission speed is high, you might begin a display pass, +then find that much or all of the file has arrived before you can complete +the pass. (You can detect this by noting the JPEG_REACHED_EOI return code +from jpeg_consume_input(), or equivalently by testing jpeg_input_complete().) +In this situation you may wish to abort the current display pass and start a +new one using the newly arrived information. To do so, just call +jpeg_finish_output() and then start a new pass with jpeg_start_output(). + +A variant strategy is to abort and restart display if more than one complete +scan arrives during an output pass; this can be detected by noting +JPEG_REACHED_SOS returns and/or examining cinfo.input_scan_number. This +idea should be employed with caution, however, since the display process +might never get to the bottom of the image before being aborted, resulting +in the lower part of the screen being several passes worse than the upper. +In most cases it's probably best to abort an output pass only if the whole +file has arrived and you want to begin the final output pass immediately. + +When receiving data across a communication link, we recommend always using +the current input scan number for the output target scan number; if a +higher-quality final pass is to be done, it should be started (aborting any +incomplete output pass) as soon as the end of file is received. However, +many other strategies are possible. For example, the application can examine +the parameters of the current input scan and decide whether to display it or +not. If the scan contains only chroma data, one might choose not to use it +as the target scan, expecting that the scan will be small and will arrive +quickly. To skip to the next scan, call jpeg_consume_input() until it +returns JPEG_REACHED_SOS or JPEG_REACHED_EOI. Or just use the next higher +number as the target scan for jpeg_start_output(); but that method doesn't +let you inspect the next scan's parameters before deciding to display it. + + +In buffered-image mode, jpeg_start_decompress() never performs input and +thus never suspends. An application that uses input suspension with +buffered-image mode must be prepared for suspension returns from these +routines: +* jpeg_start_output() performs input only if you request 2-pass quantization + and the target scan isn't fully read yet. (This is discussed below.) +* jpeg_read_scanlines(), as always, returns the number of scanlines that it + was able to produce before suspending. +* jpeg_finish_output() will read any markers following the target scan, + up to the end of the file or the SOS marker that begins another scan. + (But it reads no input if jpeg_consume_input() has already reached the + end of the file or a SOS marker beyond the target output scan.) +* jpeg_finish_decompress() will read until the end of file, and thus can + suspend if the end hasn't already been reached (as can be tested by + calling jpeg_input_complete()). +jpeg_start_output(), jpeg_finish_output(), and jpeg_finish_decompress() +all return TRUE if they completed their tasks, FALSE if they had to suspend. +In the event of a FALSE return, the application must load more input data +and repeat the call. Applications that use non-suspending data sources need +not check the return values of these three routines. + + +It is possible to change decoding parameters between output passes in the +buffered-image mode. The decoder library currently supports only very +limited changes of parameters. ONLY THE FOLLOWING parameter changes are +allowed after jpeg_start_decompress() is called: +* dct_method can be changed before each call to jpeg_start_output(). + For example, one could use a fast DCT method for early scans, changing + to a higher quality method for the final scan. +* dither_mode can be changed before each call to jpeg_start_output(); + of course this has no impact if not using color quantization. Typically + one would use ordered dither for initial passes, then switch to + Floyd-Steinberg dither for the final pass. Caution: changing dither mode + can cause more memory to be allocated by the library. Although the amount + of memory involved is not large (a scanline or so), it may cause the + initial max_memory_to_use specification to be exceeded, which in the worst + case would result in an out-of-memory failure. +* do_block_smoothing can be changed before each call to jpeg_start_output(). + This setting is relevant only when decoding a progressive JPEG image. + During the first DC-only scan, block smoothing provides a very "fuzzy" look + instead of the very "blocky" look seen without it; which is better seems a + matter of personal taste. But block smoothing is nearly always a win + during later stages, especially when decoding a successive-approximation + image: smoothing helps to hide the slight blockiness that otherwise shows + up on smooth gradients until the lowest coefficient bits are sent. +* Color quantization mode can be changed under the rules described below. + You *cannot* change between full-color and quantized output (because that + would alter the required I/O buffer sizes), but you can change which + quantization method is used. + +When generating color-quantized output, changing quantization method is a +very useful way of switching between high-speed and high-quality display. +The library allows you to change among its three quantization methods: +1. Single-pass quantization to a fixed color cube. + Selected by cinfo.two_pass_quantize = FALSE and cinfo.colormap = NULL. +2. Single-pass quantization to an application-supplied colormap. + Selected by setting cinfo.colormap to point to the colormap (the value of + two_pass_quantize is ignored); also set cinfo.actual_number_of_colors. +3. Two-pass quantization to a colormap chosen specifically for the image. + Selected by cinfo.two_pass_quantize = TRUE and cinfo.colormap = NULL. + (This is the default setting selected by jpeg_read_header, but it is + probably NOT what you want for the first pass of progressive display!) +These methods offer successively better quality and lesser speed. However, +only the first method is available for quantizing in non-RGB color spaces. + +IMPORTANT: because the different quantizer methods have very different +working-storage requirements, the library requires you to indicate which +one(s) you intend to use before you call jpeg_start_decompress(). (If we did +not require this, the max_memory_to_use setting would be a complete fiction.) +You do this by setting one or more of these three cinfo fields to TRUE: + enable_1pass_quant Fixed color cube colormap + enable_external_quant Externally-supplied colormap + enable_2pass_quant Two-pass custom colormap +All three are initialized FALSE by jpeg_read_header(). But +jpeg_start_decompress() automatically sets TRUE the one selected by the +current two_pass_quantize and colormap settings, so you only need to set the +enable flags for any other quantization methods you plan to change to later. + +After setting the enable flags correctly at jpeg_start_decompress() time, you +can change to any enabled quantization method by setting two_pass_quantize +and colormap properly just before calling jpeg_start_output(). The following +special rules apply: +1. You must explicitly set cinfo.colormap to NULL when switching to 1-pass + or 2-pass mode from a different mode, or when you want the 2-pass + quantizer to be re-run to generate a new colormap. +2. To switch to an external colormap, or to change to a different external + colormap than was used on the prior pass, you must call + jpeg_new_colormap() after setting cinfo.colormap. +NOTE: if you want to use the same colormap as was used in the prior pass, +you should not do either of these things. This will save some nontrivial +switchover costs. +(These requirements exist because cinfo.colormap will always be non-NULL +after completing a prior output pass, since both the 1-pass and 2-pass +quantizers set it to point to their output colormaps. Thus you have to +do one of these two things to notify the library that something has changed. +Yup, it's a bit klugy, but it's necessary to do it this way for backwards +compatibility.) + +Note that in buffered-image mode, the library generates any requested colormap +during jpeg_start_output(), not during jpeg_start_decompress(). + +When using two-pass quantization, jpeg_start_output() makes a pass over the +buffered image to determine the optimum color map; it therefore may take a +significant amount of time, whereas ordinarily it does little work. The +progress monitor hook is called during this pass, if defined. It is also +important to realize that if the specified target scan number is greater than +or equal to the current input scan number, jpeg_start_output() will attempt +to consume input as it makes this pass. If you use a suspending data source, +you need to check for a FALSE return from jpeg_start_output() under these +conditions. The combination of 2-pass quantization and a not-yet-fully-read +target scan is the only case in which jpeg_start_output() will consume input. + + +Application authors who support buffered-image mode may be tempted to use it +for all JPEG images, even single-scan ones. This will work, but it is +inefficient: there is no need to create an image-sized coefficient buffer for +single-scan images. Requesting buffered-image mode for such an image wastes +memory. Worse, it can cost time on large images, since the buffered data has +to be swapped out or written to a temporary file. If you are concerned about +maximum performance on baseline JPEG files, you should use buffered-image +mode only when the incoming file actually has multiple scans. This can be +tested by calling jpeg_has_multiple_scans(), which will return a correct +result at any time after jpeg_read_header() completes. + +It is also worth noting that when you use jpeg_consume_input() to let input +processing get ahead of output processing, the resulting pattern of access to +the coefficient buffer is quite nonsequential. It's best to use the memory +manager jmemnobs.c if you can (ie, if you have enough real or virtual main +memory). If not, at least make sure that max_memory_to_use is set as high as +possible. If the JPEG memory manager has to use a temporary file, you will +probably see a lot of disk traffic and poor performance. (This could be +improved with additional work on the memory manager, but we haven't gotten +around to it yet.) + +In some applications it may be convenient to use jpeg_consume_input() for all +input processing, including reading the initial markers; that is, you may +wish to call jpeg_consume_input() instead of jpeg_read_header() during +startup. This works, but note that you must check for JPEG_REACHED_SOS and +JPEG_REACHED_EOI return codes as the equivalent of jpeg_read_header's codes. +Once the first SOS marker has been reached, you must call +jpeg_start_decompress() before jpeg_consume_input() will consume more input; +it'll just keep returning JPEG_REACHED_SOS until you do. If you read a +tables-only file this way, jpeg_consume_input() will return JPEG_REACHED_EOI +without ever returning JPEG_REACHED_SOS; be sure to check for this case. +If this happens, the decompressor will not read any more input until you call +jpeg_abort() to reset it. It is OK to call jpeg_consume_input() even when not +using buffered-image mode, but in that case it's basically a no-op after the +initial markers have been read: it will just return JPEG_SUSPENDED. + + +Abbreviated datastreams and multiple images +------------------------------------------- + +A JPEG compression or decompression object can be reused to process multiple +images. This saves a small amount of time per image by eliminating the +"create" and "destroy" operations, but that isn't the real purpose of the +feature. Rather, reuse of an object provides support for abbreviated JPEG +datastreams. Object reuse can also simplify processing a series of images in +a single input or output file. This section explains these features. + +A JPEG file normally contains several hundred bytes worth of quantization +and Huffman tables. In a situation where many images will be stored or +transmitted with identical tables, this may represent an annoying overhead. +The JPEG standard therefore permits tables to be omitted. The standard +defines three classes of JPEG datastreams: + * "Interchange" datastreams contain an image and all tables needed to decode + the image. These are the usual kind of JPEG file. + * "Abbreviated image" datastreams contain an image, but are missing some or + all of the tables needed to decode that image. + * "Abbreviated table specification" (henceforth "tables-only") datastreams + contain only table specifications. +To decode an abbreviated image, it is necessary to load the missing table(s) +into the decoder beforehand. This can be accomplished by reading a separate +tables-only file. A variant scheme uses a series of images in which the first +image is an interchange (complete) datastream, while subsequent ones are +abbreviated and rely on the tables loaded by the first image. It is assumed +that once the decoder has read a table, it will remember that table until a +new definition for the same table number is encountered. + +It is the application designer's responsibility to figure out how to associate +the correct tables with an abbreviated image. While abbreviated datastreams +can be useful in a closed environment, their use is strongly discouraged in +any situation where data exchange with other applications might be needed. +Caveat designer. + +The JPEG library provides support for reading and writing any combination of +tables-only datastreams and abbreviated images. In both compression and +decompression objects, a quantization or Huffman table will be retained for +the lifetime of the object, unless it is overwritten by a new table definition. + + +To create abbreviated image datastreams, it is only necessary to tell the +compressor not to emit some or all of the tables it is using. Each +quantization and Huffman table struct contains a boolean field "sent_table", +which normally is initialized to FALSE. For each table used by the image, the +header-writing process emits the table and sets sent_table = TRUE unless it is +already TRUE. (In normal usage, this prevents outputting the same table +definition multiple times, as would otherwise occur because the chroma +components typically share tables.) Thus, setting this field to TRUE before +calling jpeg_start_compress() will prevent the table from being written at +all. + +If you want to create a "pure" abbreviated image file containing no tables, +just call "jpeg_suppress_tables(&cinfo, TRUE)" after constructing all the +tables. If you want to emit some but not all tables, you'll need to set the +individual sent_table fields directly. + +To create an abbreviated image, you must also call jpeg_start_compress() +with a second parameter of FALSE, not TRUE. Otherwise jpeg_start_compress() +will force all the sent_table fields to FALSE. (This is a safety feature to +prevent abbreviated images from being created accidentally.) + +To create a tables-only file, perform the same parameter setup that you +normally would, but instead of calling jpeg_start_compress() and so on, call +jpeg_write_tables(&cinfo). This will write an abbreviated datastream +containing only SOI, DQT and/or DHT markers, and EOI. All the quantization +and Huffman tables that are currently defined in the compression object will +be emitted unless their sent_tables flag is already TRUE, and then all the +sent_tables flags will be set TRUE. + +A sure-fire way to create matching tables-only and abbreviated image files +is to proceed as follows: + + create JPEG compression object + set JPEG parameters + set destination to tables-only file + jpeg_write_tables(&cinfo); + set destination to image file + jpeg_start_compress(&cinfo, FALSE); + write data... + jpeg_finish_compress(&cinfo); + +Since the JPEG parameters are not altered between writing the table file and +the abbreviated image file, the same tables are sure to be used. Of course, +you can repeat the jpeg_start_compress() ... jpeg_finish_compress() sequence +many times to produce many abbreviated image files matching the table file. + +You cannot suppress output of the computed Huffman tables when Huffman +optimization is selected. (If you could, there'd be no way to decode the +image...) Generally, you don't want to set optimize_coding = TRUE when +you are trying to produce abbreviated files. + +In some cases you might want to compress an image using tables which are +not stored in the application, but are defined in an interchange or +tables-only file readable by the application. This can be done by setting up +a JPEG decompression object to read the specification file, then copying the +tables into your compression object. See jpeg_copy_critical_parameters() +for an example of copying quantization tables. + + +To read abbreviated image files, you simply need to load the proper tables +into the decompression object before trying to read the abbreviated image. +If the proper tables are stored in the application program, you can just +allocate the table structs and fill in their contents directly. For example, +to load a fixed quantization table into table slot "n": + + if (cinfo.quant_tbl_ptrs[n] == NULL) + cinfo.quant_tbl_ptrs[n] = jpeg_alloc_quant_table((j_common_ptr) &cinfo); + quant_ptr = cinfo.quant_tbl_ptrs[n]; /* quant_ptr is JQUANT_TBL* */ + for (i = 0; i < 64; i++) { + /* Qtable[] is desired quantization table, in natural array order */ + quant_ptr->quantval[i] = Qtable[i]; + } + +Code to load a fixed Huffman table is typically (for AC table "n"): + + if (cinfo.ac_huff_tbl_ptrs[n] == NULL) + cinfo.ac_huff_tbl_ptrs[n] = jpeg_alloc_huff_table((j_common_ptr) &cinfo); + huff_ptr = cinfo.ac_huff_tbl_ptrs[n]; /* huff_ptr is JHUFF_TBL* */ + for (i = 1; i <= 16; i++) { + /* counts[i] is number of Huffman codes of length i bits, i=1..16 */ + huff_ptr->bits[i] = counts[i]; + } + for (i = 0; i < 256; i++) { + /* symbols[] is the list of Huffman symbols, in code-length order */ + huff_ptr->huffval[i] = symbols[i]; + } + +(Note that trying to set cinfo.quant_tbl_ptrs[n] to point directly at a +constant JQUANT_TBL object is not safe. If the incoming file happened to +contain a quantization table definition, your master table would get +overwritten! Instead allocate a working table copy and copy the master table +into it, as illustrated above. Ditto for Huffman tables, of course.) + +You might want to read the tables from a tables-only file, rather than +hard-wiring them into your application. The jpeg_read_header() call is +sufficient to read a tables-only file. You must pass a second parameter of +FALSE to indicate that you do not require an image to be present. Thus, the +typical scenario is + + create JPEG decompression object + set source to tables-only file + jpeg_read_header(&cinfo, FALSE); + set source to abbreviated image file + jpeg_read_header(&cinfo, TRUE); + set decompression parameters + jpeg_start_decompress(&cinfo); + read data... + jpeg_finish_decompress(&cinfo); + +In some cases, you may want to read a file without knowing whether it contains +an image or just tables. In that case, pass FALSE and check the return value +from jpeg_read_header(): it will be JPEG_HEADER_OK if an image was found, +JPEG_HEADER_TABLES_ONLY if only tables were found. (A third return value, +JPEG_SUSPENDED, is possible when using a suspending data source manager.) +Note that jpeg_read_header() will not complain if you read an abbreviated +image for which you haven't loaded the missing tables; the missing-table check +occurs later, in jpeg_start_decompress(). + + +It is possible to read a series of images from a single source file by +repeating the jpeg_read_header() ... jpeg_finish_decompress() sequence, +without releasing/recreating the JPEG object or the data source module. +(If you did reinitialize, any partial bufferload left in the data source +buffer at the end of one image would be discarded, causing you to lose the +start of the next image.) When you use this method, stored tables are +automatically carried forward, so some of the images can be abbreviated images +that depend on tables from earlier images. + +If you intend to write a series of images into a single destination file, +you might want to make a specialized data destination module that doesn't +flush the output buffer at term_destination() time. This would speed things +up by some trifling amount. Of course, you'd need to remember to flush the +buffer after the last image. You can make the later images be abbreviated +ones by passing FALSE to jpeg_start_compress(). + + +Special markers +--------------- + +Some applications may need to insert or extract special data in the JPEG +datastream. The JPEG standard provides marker types "COM" (comment) and +"APP0" through "APP15" (application) to hold application-specific data. +Unfortunately, the use of these markers is not specified by the standard. +COM markers are fairly widely used to hold user-supplied text. The JFIF file +format spec uses APP0 markers with specified initial strings to hold certain +data. Adobe applications use APP14 markers beginning with the string "Adobe" +for miscellaneous data. Other APPn markers are rarely seen, but might +contain almost anything. + +If you wish to store user-supplied text, we recommend you use COM markers +and place readable 7-bit ASCII text in them. Newline conventions are not +standardized --- expect to find LF (Unix style), CR/LF (DOS style), or CR +(Mac style). A robust COM reader should be able to cope with random binary +garbage, including nulls, since some applications generate COM markers +containing non-ASCII junk. (But yours should not be one of them.) + +For program-supplied data, use an APPn marker, and be sure to begin it with an +identifying string so that you can tell whether the marker is actually yours. +It's probably best to avoid using APP0 or APP14 for any private markers. +(NOTE: the upcoming SPIFF standard will use APP8 markers; we recommend you +not use APP8 markers for any private purposes, either.) + +Keep in mind that at most 65533 bytes can be put into one marker, but you +can have as many markers as you like. + +By default, the IJG compression library will write a JFIF APP0 marker if the +selected JPEG colorspace is grayscale or YCbCr, or an Adobe APP14 marker if +the selected colorspace is RGB, CMYK, or YCCK. You can disable this, but +we don't recommend it. The decompression library will recognize JFIF and +Adobe markers and will set the JPEG colorspace properly when one is found. + + +You can write special markers immediately following the datastream header by +calling jpeg_write_marker() after jpeg_start_compress() and before the first +call to jpeg_write_scanlines(). When you do this, the markers appear after +the SOI and the JFIF APP0 and Adobe APP14 markers (if written), but before +all else. Specify the marker type parameter as "JPEG_COM" for COM or +"JPEG_APP0 + n" for APPn. (Actually, jpeg_write_marker will let you write +any marker type, but we don't recommend writing any other kinds of marker.) +For example, to write a user comment string pointed to by comment_text: + jpeg_write_marker(cinfo, JPEG_COM, comment_text, strlen(comment_text)); + +If it's not convenient to store all the marker data in memory at once, +you can instead call jpeg_write_m_header() followed by multiple calls to +jpeg_write_m_byte(). If you do it this way, it's your responsibility to +call jpeg_write_m_byte() exactly the number of times given in the length +parameter to jpeg_write_m_header(). (This method lets you empty the +output buffer partway through a marker, which might be important when +using a suspending data destination module. In any case, if you are using +a suspending destination, you should flush its buffer after inserting +any special markers. See "I/O suspension".) + +Or, if you prefer to synthesize the marker byte sequence yourself, +you can just cram it straight into the data destination module. + +If you are writing JFIF 1.02 extension markers (thumbnail images), don't +forget to set cinfo.JFIF_minor_version = 2 so that the encoder will write the +correct JFIF version number in the JFIF header marker. The library's default +is to write version 1.01, but that's wrong if you insert any 1.02 extension +markers. (We could probably get away with just defaulting to 1.02, but there +used to be broken decoders that would complain about unknown minor version +numbers. To reduce compatibility risks it's safest not to write 1.02 unless +you are actually using 1.02 extensions.) + + +When reading, two methods of handling special markers are available: +1. You can ask the library to save the contents of COM and/or APPn markers +into memory, and then examine them at your leisure afterwards. +2. You can supply your own routine to process COM and/or APPn markers +on-the-fly as they are read. +The first method is simpler to use, especially if you are using a suspending +data source; writing a marker processor that copes with input suspension is +not easy (consider what happens if the marker is longer than your available +input buffer). However, the second method conserves memory since the marker +data need not be kept around after it's been processed. + +For either method, you'd normally set up marker handling after creating a +decompression object and before calling jpeg_read_header(), because the +markers of interest will typically be near the head of the file and so will +be scanned by jpeg_read_header. Once you've established a marker handling +method, it will be used for the life of that decompression object +(potentially many datastreams), unless you change it. Marker handling is +determined separately for COM markers and for each APPn marker code. + + +To save the contents of special markers in memory, call + jpeg_save_markers(cinfo, marker_code, length_limit) +where marker_code is the marker type to save, JPEG_COM or JPEG_APP0+n. +(To arrange to save all the special marker types, you need to call this +routine 17 times, for COM and APP0-APP15.) If the incoming marker is longer +than length_limit data bytes, only length_limit bytes will be saved; this +parameter allows you to avoid chewing up memory when you only need to see the +first few bytes of a potentially large marker. If you want to save all the +data, set length_limit to 0xFFFF; that is enough since marker lengths are only +16 bits. As a special case, setting length_limit to 0 prevents that marker +type from being saved at all. (That is the default behavior, in fact.) + +After jpeg_read_header() completes, you can examine the special markers by +following the cinfo->marker_list pointer chain. All the special markers in +the file appear in this list, in order of their occurrence in the file (but +omitting any markers of types you didn't ask for). Both the original data +length and the saved data length are recorded for each list entry; the latter +will not exceed length_limit for the particular marker type. Note that these +lengths exclude the marker length word, whereas the stored representation +within the JPEG file includes it. (Hence the maximum data length is really +only 65533.) + +It is possible that additional special markers appear in the file beyond the +SOS marker at which jpeg_read_header stops; if so, the marker list will be +extended during reading of the rest of the file. This is not expected to be +common, however. If you are short on memory you may want to reset the length +limit to zero for all marker types after finishing jpeg_read_header, to +ensure that the max_memory_to_use setting cannot be exceeded due to addition +of later markers. + +The marker list remains stored until you call jpeg_finish_decompress or +jpeg_abort, at which point the memory is freed and the list is set to empty. +(jpeg_destroy also releases the storage, of course.) + +Note that the library is internally interested in APP0 and APP14 markers; +if you try to set a small nonzero length limit on these types, the library +will silently force the length up to the minimum it wants. (But you can set +a zero length limit to prevent them from being saved at all.) Also, in a +16-bit environment, the maximum length limit may be constrained to less than +65533 by malloc() limitations. It is therefore best not to assume that the +effective length limit is exactly what you set it to be. + + +If you want to supply your own marker-reading routine, you do it by calling +jpeg_set_marker_processor(). A marker processor routine must have the +signature + boolean jpeg_marker_parser_method (j_decompress_ptr cinfo) +Although the marker code is not explicitly passed, the routine can find it +in cinfo->unread_marker. At the time of call, the marker proper has been +read from the data source module. The processor routine is responsible for +reading the marker length word and the remaining parameter bytes, if any. +Return TRUE to indicate success. (FALSE should be returned only if you are +using a suspending data source and it tells you to suspend. See the standard +marker processors in jdmarker.c for appropriate coding methods if you need to +use a suspending data source.) + +If you override the default APP0 or APP14 processors, it is up to you to +recognize JFIF and Adobe markers if you want colorspace recognition to occur +properly. We recommend copying and extending the default processors if you +want to do that. (A better idea is to save these marker types for later +examination by calling jpeg_save_markers(); that method doesn't interfere +with the library's own processing of these markers.) + +jpeg_set_marker_processor() and jpeg_save_markers() are mutually exclusive +--- if you call one it overrides any previous call to the other, for the +particular marker type specified. + +A simple example of an external COM processor can be found in djpeg.c. +Also, see jpegtran.c for an example of using jpeg_save_markers. + + +Raw (downsampled) image data +---------------------------- + +Some applications need to supply already-downsampled image data to the JPEG +compressor, or to receive raw downsampled data from the decompressor. The +library supports this requirement by allowing the application to write or +read raw data, bypassing the normal preprocessing or postprocessing steps. +The interface is different from the standard one and is somewhat harder to +use. If your interest is merely in bypassing color conversion, we recommend +that you use the standard interface and simply set jpeg_color_space = +in_color_space (or jpeg_color_space = out_color_space for decompression). +The mechanism described in this section is necessary only to supply or +receive downsampled image data, in which not all components have the same +dimensions. + + +To compress raw data, you must supply the data in the colorspace to be used +in the JPEG file (please read the earlier section on Special color spaces) +and downsampled to the sampling factors specified in the JPEG parameters. +You must supply the data in the format used internally by the JPEG library, +namely a JSAMPIMAGE array. This is an array of pointers to two-dimensional +arrays, each of type JSAMPARRAY. Each 2-D array holds the values for one +color component. This structure is necessary since the components are of +different sizes. If the image dimensions are not a multiple of the MCU size, +you must also pad the data correctly (usually, this is done by replicating +the last column and/or row). The data must be padded to a multiple of a DCT +block in each component: that is, each downsampled row must contain a +multiple of 8 valid samples, and there must be a multiple of 8 sample rows +for each component. (For applications such as conversion of digital TV +images, the standard image size is usually a multiple of the DCT block size, +so that no padding need actually be done.) + +The procedure for compression of raw data is basically the same as normal +compression, except that you call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). Before calling jpeg_start_compress(), you must do +the following: + * Set cinfo->raw_data_in to TRUE. (It is set FALSE by jpeg_set_defaults().) + This notifies the library that you will be supplying raw data. + Furthermore, set cinfo->do_fancy_downsampling to FALSE if you want to use + real downsampled data. (It is set TRUE by jpeg_set_defaults().) + * Ensure jpeg_color_space is correct --- an explicit jpeg_set_colorspace() + call is a good idea. Note that since color conversion is bypassed, + in_color_space is ignored, except that jpeg_set_defaults() uses it to + choose the default jpeg_color_space setting. + * Ensure the sampling factors, cinfo->comp_info[i].h_samp_factor and + cinfo->comp_info[i].v_samp_factor, are correct. Since these indicate the + dimensions of the data you are supplying, it's wise to set them + explicitly, rather than assuming the library's defaults are what you want. + +To pass raw data to the library, call jpeg_write_raw_data() in place of +jpeg_write_scanlines(). The two routines work similarly except that +jpeg_write_raw_data takes a JSAMPIMAGE data array rather than JSAMPARRAY. +The scanlines count passed to and returned from jpeg_write_raw_data is +measured in terms of the component with the largest v_samp_factor. + +jpeg_write_raw_data() processes one MCU row per call, which is to say +v_samp_factor*DCTSIZE sample rows of each component. The passed num_lines +value must be at least max_v_samp_factor*DCTSIZE, and the return value will +be exactly that amount (or possibly some multiple of that amount, in future +library versions). This is true even on the last call at the bottom of the +image; don't forget to pad your data as necessary. + +The required dimensions of the supplied data can be computed for each +component as + cinfo->comp_info[i].width_in_blocks*DCTSIZE samples per row + cinfo->comp_info[i].height_in_blocks*DCTSIZE rows in image +after jpeg_start_compress() has initialized those fields. If the valid data +is smaller than this, it must be padded appropriately. For some sampling +factors and image sizes, additional dummy DCT blocks are inserted to make +the image a multiple of the MCU dimensions. The library creates such dummy +blocks itself; it does not read them from your supplied data. Therefore you +need never pad by more than DCTSIZE samples. An example may help here. +Assume 2h2v downsampling of YCbCr data, that is + cinfo->comp_info[0].h_samp_factor = 2 for Y + cinfo->comp_info[0].v_samp_factor = 2 + cinfo->comp_info[1].h_samp_factor = 1 for Cb + cinfo->comp_info[1].v_samp_factor = 1 + cinfo->comp_info[2].h_samp_factor = 1 for Cr + cinfo->comp_info[2].v_samp_factor = 1 +and suppose that the nominal image dimensions (cinfo->image_width and +cinfo->image_height) are 101x101 pixels. Then jpeg_start_compress() will +compute downsampled_width = 101 and width_in_blocks = 13 for Y, +downsampled_width = 51 and width_in_blocks = 7 for Cb and Cr (and the same +for the height fields). You must pad the Y data to at least 13*8 = 104 +columns and rows, the Cb/Cr data to at least 7*8 = 56 columns and rows. The +MCU height is max_v_samp_factor = 2 DCT rows so you must pass at least 16 +scanlines on each call to jpeg_write_raw_data(), which is to say 16 actual +sample rows of Y and 8 each of Cb and Cr. A total of 7 MCU rows are needed, +so you must pass a total of 7*16 = 112 "scanlines". The last DCT block row +of Y data is dummy, so it doesn't matter what you pass for it in the data +arrays, but the scanlines count must total up to 112 so that all of the Cb +and Cr data gets passed. + +Output suspension is supported with raw-data compression: if the data +destination module suspends, jpeg_write_raw_data() will return 0. +In this case the same data rows must be passed again on the next call. + + +Decompression with raw data output implies bypassing all postprocessing. +You must deal with the color space and sampling factors present in the +incoming file. If your application only handles, say, 2h1v YCbCr data, +you must check for and fail on other color spaces or other sampling factors. +The library will not convert to a different color space for you. + +To obtain raw data output, set cinfo->raw_data_out = TRUE before +jpeg_start_decompress() (it is set FALSE by jpeg_read_header()). Be sure to +verify that the color space and sampling factors are ones you can handle. +Furthermore, set cinfo->do_fancy_upsampling = FALSE if you want to get real +downsampled data (it is set TRUE by jpeg_read_header()). +Then call jpeg_read_raw_data() in place of jpeg_read_scanlines(). The +decompression process is otherwise the same as usual. + +jpeg_read_raw_data() returns one MCU row per call, and thus you must pass a +buffer of at least max_v_samp_factor*DCTSIZE scanlines (scanline counting is +the same as for raw-data compression). The buffer you pass must be large +enough to hold the actual data plus padding to DCT-block boundaries. As with +compression, any entirely dummy DCT blocks are not processed so you need not +allocate space for them, but the total scanline count includes them. The +above example of computing buffer dimensions for raw-data compression is +equally valid for decompression. + +Input suspension is supported with raw-data decompression: if the data source +module suspends, jpeg_read_raw_data() will return 0. You can also use +buffered-image mode to read raw data in multiple passes. + + +Really raw data: DCT coefficients +--------------------------------- + +It is possible to read or write the contents of a JPEG file as raw DCT +coefficients. This facility is mainly intended for use in lossless +transcoding between different JPEG file formats. Other possible applications +include lossless cropping of a JPEG image, lossless reassembly of a +multi-strip or multi-tile TIFF/JPEG file into a single JPEG datastream, etc. + +To read the contents of a JPEG file as DCT coefficients, open the file and do +jpeg_read_header() as usual. But instead of calling jpeg_start_decompress() +and jpeg_read_scanlines(), call jpeg_read_coefficients(). This will read the +entire image into a set of virtual coefficient-block arrays, one array per +component. The return value is a pointer to an array of virtual-array +descriptors. Each virtual array can be accessed directly using the JPEG +memory manager's access_virt_barray method (see Memory management, below, +and also read structure.txt's discussion of virtual array handling). Or, +for simple transcoding to a different JPEG file format, the array list can +just be handed directly to jpeg_write_coefficients(). + +Each block in the block arrays contains quantized coefficient values in +normal array order (not JPEG zigzag order). The block arrays contain only +DCT blocks containing real data; any entirely-dummy blocks added to fill out +interleaved MCUs at the right or bottom edges of the image are discarded +during reading and are not stored in the block arrays. (The size of each +block array can be determined from the width_in_blocks and height_in_blocks +fields of the component's comp_info entry.) This is also the data format +expected by jpeg_write_coefficients(). + +When you are done using the virtual arrays, call jpeg_finish_decompress() +to release the array storage and return the decompression object to an idle +state; or just call jpeg_destroy() if you don't need to reuse the object. + +If you use a suspending data source, jpeg_read_coefficients() will return +NULL if it is forced to suspend; a non-NULL return value indicates successful +completion. You need not test for a NULL return value when using a +non-suspending data source. + +It is also possible to call jpeg_read_coefficients() to obtain access to the +decoder's coefficient arrays during a normal decode cycle in buffered-image +mode. This frammish might be useful for progressively displaying an incoming +image and then re-encoding it without loss. To do this, decode in buffered- +image mode as discussed previously, then call jpeg_read_coefficients() after +the last jpeg_finish_output() call. The arrays will be available for your use +until you call jpeg_finish_decompress(). + + +To write the contents of a JPEG file as DCT coefficients, you must provide +the DCT coefficients stored in virtual block arrays. You can either pass +block arrays read from an input JPEG file by jpeg_read_coefficients(), or +allocate virtual arrays from the JPEG compression object and fill them +yourself. In either case, jpeg_write_coefficients() is substituted for +jpeg_start_compress() and jpeg_write_scanlines(). Thus the sequence is + * Create compression object + * Set all compression parameters as necessary + * Request virtual arrays if needed + * jpeg_write_coefficients() + * jpeg_finish_compress() + * Destroy or re-use compression object +jpeg_write_coefficients() is passed a pointer to an array of virtual block +array descriptors; the number of arrays is equal to cinfo.num_components. + +The virtual arrays need only have been requested, not realized, before +jpeg_write_coefficients() is called. A side-effect of +jpeg_write_coefficients() is to realize any virtual arrays that have been +requested from the compression object's memory manager. Thus, when obtaining +the virtual arrays from the compression object, you should fill the arrays +after calling jpeg_write_coefficients(). The data is actually written out +when you call jpeg_finish_compress(); jpeg_write_coefficients() only writes +the file header. + +When writing raw DCT coefficients, it is crucial that the JPEG quantization +tables and sampling factors match the way the data was encoded, or the +resulting file will be invalid. For transcoding from an existing JPEG file, +we recommend using jpeg_copy_critical_parameters(). This routine initializes +all the compression parameters to default values (like jpeg_set_defaults()), +then copies the critical information from a source decompression object. +The decompression object should have just been used to read the entire +JPEG input file --- that is, it should be awaiting jpeg_finish_decompress(). + +jpeg_write_coefficients() marks all tables stored in the compression object +as needing to be written to the output file (thus, it acts like +jpeg_start_compress(cinfo, TRUE)). This is for safety's sake, to avoid +emitting abbreviated JPEG files by accident. If you really want to emit an +abbreviated JPEG file, call jpeg_suppress_tables(), or set the tables' +individual sent_table flags, between calling jpeg_write_coefficients() and +jpeg_finish_compress(). + + +Progress monitoring +------------------- + +Some applications may need to regain control from the JPEG library every so +often. The typical use of this feature is to produce a percent-done bar or +other progress display. (For a simple example, see cjpeg.c or djpeg.c.) +Although you do get control back frequently during the data-transferring pass +(the jpeg_read_scanlines or jpeg_write_scanlines loop), any additional passes +will occur inside jpeg_finish_compress or jpeg_start_decompress; those +routines may take a long time to execute, and you don't get control back +until they are done. + +You can define a progress-monitor routine which will be called periodically +by the library. No guarantees are made about how often this call will occur, +so we don't recommend you use it for mouse tracking or anything like that. +At present, a call will occur once per MCU row, scanline, or sample row +group, whichever unit is convenient for the current processing mode; so the +wider the image, the longer the time between calls. During the data +transferring pass, only one call occurs per call of jpeg_read_scanlines or +jpeg_write_scanlines, so don't pass a large number of scanlines at once if +you want fine resolution in the progress count. (If you really need to use +the callback mechanism for time-critical tasks like mouse tracking, you could +insert additional calls inside some of the library's inner loops.) + +To establish a progress-monitor callback, create a struct jpeg_progress_mgr, +fill in its progress_monitor field with a pointer to your callback routine, +and set cinfo->progress to point to the struct. The callback will be called +whenever cinfo->progress is non-NULL. (This pointer is set to NULL by +jpeg_create_compress or jpeg_create_decompress; the library will not change +it thereafter. So if you allocate dynamic storage for the progress struct, +make sure it will live as long as the JPEG object does. Allocating from the +JPEG memory manager with lifetime JPOOL_PERMANENT will work nicely.) You +can use the same callback routine for both compression and decompression. + +The jpeg_progress_mgr struct contains four fields which are set by the library: + long pass_counter; /* work units completed in this pass */ + long pass_limit; /* total number of work units in this pass */ + int completed_passes; /* passes completed so far */ + int total_passes; /* total number of passes expected */ +During any one pass, pass_counter increases from 0 up to (not including) +pass_limit; the step size is usually but not necessarily 1. The pass_limit +value may change from one pass to another. The expected total number of +passes is in total_passes, and the number of passes already completed is in +completed_passes. Thus the fraction of work completed may be estimated as + completed_passes + (pass_counter/pass_limit) + -------------------------------------------- + total_passes +ignoring the fact that the passes may not be equal amounts of work. + +When decompressing, pass_limit can even change within a pass, because it +depends on the number of scans in the JPEG file, which isn't always known in +advance. The computed fraction-of-work-done may jump suddenly (if the library +discovers it has overestimated the number of scans) or even decrease (in the +opposite case). It is not wise to put great faith in the work estimate. + +When using the decompressor's buffered-image mode, the progress monitor work +estimate is likely to be completely unhelpful, because the library has no way +to know how many output passes will be demanded of it. Currently, the library +sets total_passes based on the assumption that there will be one more output +pass if the input file end hasn't yet been read (jpeg_input_complete() isn't +TRUE), but no more output passes if the file end has been reached when the +output pass is started. This means that total_passes will rise as additional +output passes are requested. If you have a way of determining the input file +size, estimating progress based on the fraction of the file that's been read +will probably be more useful than using the library's value. + + +Memory management +----------------- + +This section covers some key facts about the JPEG library's built-in memory +manager. For more info, please read structure.txt's section about the memory +manager, and consult the source code if necessary. + +All memory and temporary file allocation within the library is done via the +memory manager. If necessary, you can replace the "back end" of the memory +manager to control allocation yourself (for example, if you don't want the +library to use malloc() and free() for some reason). + +Some data is allocated "permanently" and will not be freed until the JPEG +object is destroyed. Most data is allocated "per image" and is freed by +jpeg_finish_compress, jpeg_finish_decompress, or jpeg_abort. You can call the +memory manager yourself to allocate structures that will automatically be +freed at these times. Typical code for this is + ptr = (*cinfo->mem->alloc_small) ((j_common_ptr) cinfo, JPOOL_IMAGE, size); +Use JPOOL_PERMANENT to get storage that lasts as long as the JPEG object. +Use alloc_large instead of alloc_small for anything bigger than a few Kbytes. +There are also alloc_sarray and alloc_barray routines that automatically +build 2-D sample or block arrays. + +The library's minimum space requirements to process an image depend on the +image's width, but not on its height, because the library ordinarily works +with "strip" buffers that are as wide as the image but just a few rows high. +Some operating modes (eg, two-pass color quantization) require full-image +buffers. Such buffers are treated as "virtual arrays": only the current strip +need be in memory, and the rest can be swapped out to a temporary file. + +If you use the simplest memory manager back end (jmemnobs.c), then no +temporary files are used; virtual arrays are simply malloc()'d. Images bigger +than memory can be processed only if your system supports virtual memory. +The other memory manager back ends support temporary files of various flavors +and thus work in machines without virtual memory. They may also be useful on +Unix machines if you need to process images that exceed available swap space. + +When using temporary files, the library will make the in-memory buffers for +its virtual arrays just big enough to stay within a "maximum memory" setting. +Your application can set this limit by setting cinfo->mem->max_memory_to_use +after creating the JPEG object. (Of course, there is still a minimum size for +the buffers, so the max-memory setting is effective only if it is bigger than +the minimum space needed.) If you allocate any large structures yourself, you +must allocate them before jpeg_start_compress() or jpeg_start_decompress() in +order to have them counted against the max memory limit. Also keep in mind +that space allocated with alloc_small() is ignored, on the assumption that +it's too small to be worth worrying about; so a reasonable safety margin +should be left when setting max_memory_to_use. + +If you use the jmemname.c or jmemdos.c memory manager back end, it is +important to clean up the JPEG object properly to ensure that the temporary +files get deleted. (This is especially crucial with jmemdos.c, where the +"temporary files" may be extended-memory segments; if they are not freed, +DOS will require a reboot to recover the memory.) Thus, with these memory +managers, it's a good idea to provide a signal handler that will trap any +early exit from your program. The handler should call either jpeg_abort() +or jpeg_destroy() for any active JPEG objects. A handler is not needed with +jmemnobs.c, and shouldn't be necessary with jmemansi.c or jmemmac.c either, +since the C library is supposed to take care of deleting files made with +tmpfile(). + + +Memory usage +------------ + +Working memory requirements while performing compression or decompression +depend on image dimensions, image characteristics (such as colorspace and +JPEG process), and operating mode (application-selected options). + +As of v6b, the decompressor requires: + 1. About 24K in more-or-less-fixed-size data. This varies a bit depending + on operating mode and image characteristics (particularly color vs. + grayscale), but it doesn't depend on image dimensions. + 2. Strip buffers (of size proportional to the image width) for IDCT and + upsampling results. The worst case for commonly used sampling factors + is about 34 bytes * width in pixels for a color image. A grayscale image + only needs about 8 bytes per pixel column. + 3. A full-image DCT coefficient buffer is needed to decode a multi-scan JPEG + file (including progressive JPEGs), or whenever you select buffered-image + mode. This takes 2 bytes/coefficient. At typical 2x2 sampling, that's + 3 bytes per pixel for a color image. Worst case (1x1 sampling) requires + 6 bytes/pixel. For grayscale, figure 2 bytes/pixel. + 4. To perform 2-pass color quantization, the decompressor also needs a + 128K color lookup table and a full-image pixel buffer (3 bytes/pixel). +This does not count any memory allocated by the application, such as a +buffer to hold the final output image. + +The above figures are valid for 8-bit JPEG data precision and a machine with +32-bit ints. For 12-bit JPEG data, double the size of the strip buffers and +quantization pixel buffer. The "fixed-size" data will be somewhat smaller +with 16-bit ints, larger with 64-bit ints. Also, CMYK or other unusual +color spaces will require different amounts of space. + +The full-image coefficient and pixel buffers, if needed at all, do not +have to be fully RAM resident; you can have the library use temporary +files instead when the total memory usage would exceed a limit you set. +(But if your OS supports virtual memory, it's probably better to just use +jmemnobs and let the OS do the swapping.) + +The compressor's memory requirements are similar, except that it has no need +for color quantization. Also, it needs a full-image DCT coefficient buffer +if Huffman-table optimization is asked for, even if progressive mode is not +requested. + +If you need more detailed information about memory usage in a particular +situation, you can enable the MEM_STATS code in jmemmgr.c. + + +Library compile-time options +---------------------------- + +A number of compile-time options are available by modifying jmorecfg.h. + +The JPEG standard provides for both the baseline 8-bit DCT process and +a 12-bit DCT process. The IJG code supports 12-bit lossy JPEG if you define +BITS_IN_JSAMPLE as 12 rather than 8. Note that this causes JSAMPLE to be +larger than a char, so it affects the surrounding application's image data. +The sample applications cjpeg and djpeg can support 12-bit mode only for PPM +and GIF file formats; you must disable the other file formats to compile a +12-bit cjpeg or djpeg. (install.txt has more information about that.) +At present, a 12-bit library can handle *only* 12-bit images, not both +precisions. (If you need to include both 8- and 12-bit libraries in a single +application, you could probably do it by defining NEED_SHORT_EXTERNAL_NAMES +for just one of the copies. You'd have to access the 8-bit and 12-bit copies +from separate application source files. This is untested ... if you try it, +we'd like to hear whether it works!) + +Note that a 12-bit library always compresses in Huffman optimization mode, +in order to generate valid Huffman tables. This is necessary because our +default Huffman tables only cover 8-bit data. If you need to output 12-bit +files in one pass, you'll have to supply suitable default Huffman tables. +You may also want to supply your own DCT quantization tables; the existing +quality-scaling code has been developed for 8-bit use, and probably doesn't +generate especially good tables for 12-bit. + +The maximum number of components (color channels) in the image is determined +by MAX_COMPONENTS. The JPEG standard allows up to 255 components, but we +expect that few applications will need more than four or so. + +On machines with unusual data type sizes, you may be able to improve +performance or reduce memory space by tweaking the various typedefs in +jmorecfg.h. In particular, on some RISC CPUs, access to arrays of "short"s +is quite slow; consider trading memory for speed by making JCOEF, INT16, and +UINT16 be "int" or "unsigned int". UINT8 is also a candidate to become int. +You probably don't want to make JSAMPLE be int unless you have lots of memory +to burn. + +You can reduce the size of the library by compiling out various optional +functions. To do this, undefine xxx_SUPPORTED symbols as necessary. + +You can also save a few K by not having text error messages in the library; +the standard error message table occupies about 5Kb. This is particularly +reasonable for embedded applications where there's no good way to display +a message anyway. To do this, remove the creation of the message table +(jpeg_std_message_table[]) from jerror.c, and alter format_message to do +something reasonable without it. You could output the numeric value of the +message code number, for example. If you do this, you can also save a couple +more K by modifying the TRACEMSn() macros in jerror.h to expand to nothing; +you don't need trace capability anyway, right? + + +Portability considerations +-------------------------- + +The JPEG library has been written to be extremely portable; the sample +applications cjpeg and djpeg are slightly less so. This section summarizes +the design goals in this area. (If you encounter any bugs that cause the +library to be less portable than is claimed here, we'd appreciate hearing +about them.) + +The code works fine on ANSI C, C++, and pre-ANSI C compilers, using any of +the popular system include file setups, and some not-so-popular ones too. +See install.txt for configuration procedures. + +The code is not dependent on the exact sizes of the C data types. As +distributed, we make the assumptions that + char is at least 8 bits wide + short is at least 16 bits wide + int is at least 16 bits wide + long is at least 32 bits wide +(These are the minimum requirements of the ANSI C standard.) Wider types will +work fine, although memory may be used inefficiently if char is much larger +than 8 bits or short is much bigger than 16 bits. The code should work +equally well with 16- or 32-bit ints. + +In a system where these assumptions are not met, you may be able to make the +code work by modifying the typedefs in jmorecfg.h. However, you will probably +have difficulty if int is less than 16 bits wide, since references to plain +int abound in the code. + +char can be either signed or unsigned, although the code runs faster if an +unsigned char type is available. If char is wider than 8 bits, you will need +to redefine JOCTET and/or provide custom data source/destination managers so +that JOCTET represents exactly 8 bits of data on external storage. + +The JPEG library proper does not assume ASCII representation of characters. +But some of the image file I/O modules in cjpeg/djpeg do have ASCII +dependencies in file-header manipulation; so does cjpeg's select_file_type() +routine. + +The JPEG library does not rely heavily on the C library. In particular, C +stdio is used only by the data source/destination modules and the error +handler, all of which are application-replaceable. (cjpeg/djpeg are more +heavily dependent on stdio.) malloc and free are called only from the memory +manager "back end" module, so you can use a different memory allocator by +replacing that one file. + +The code generally assumes that C names must be unique in the first 15 +characters. However, global function names can be made unique in the +first 6 characters by defining NEED_SHORT_EXTERNAL_NAMES. + +More info about porting the code may be gleaned by reading jconfig.txt, +jmorecfg.h, and jinclude.h. + + +Notes for MS-DOS implementors +----------------------------- + +The IJG code is designed to work efficiently in 80x86 "small" or "medium" +memory models (i.e., data pointers are 16 bits unless explicitly declared +"far"; code pointers can be either size). You may be able to use small +model to compile cjpeg or djpeg by itself, but you will probably have to use +medium model for any larger application. This won't make much difference in +performance. You *will* take a noticeable performance hit if you use a +large-data memory model (perhaps 10%-25%), and you should avoid "huge" model +if at all possible. + +The JPEG library typically needs 2Kb-3Kb of stack space. It will also +malloc about 20K-30K of near heap space while executing (and lots of far +heap, but that doesn't count in this calculation). This figure will vary +depending on selected operating mode, and to a lesser extent on image size. +There is also about 5Kb-6Kb of constant data which will be allocated in the +near data segment (about 4Kb of this is the error message table). +Thus you have perhaps 20K available for other modules' static data and near +heap space before you need to go to a larger memory model. The C library's +static data will account for several K of this, but that still leaves a good +deal for your needs. (If you are tight on space, you could reduce the sizes +of the I/O buffers allocated by jdatasrc.c and jdatadst.c, say from 4K to +1K. Another possibility is to move the error message table to far memory; +this should be doable with only localized hacking on jerror.c.) + +About 2K of the near heap space is "permanent" memory that will not be +released until you destroy the JPEG object. This is only an issue if you +save a JPEG object between compression or decompression operations. + +Far data space may also be a tight resource when you are dealing with large +images. The most memory-intensive case is decompression with two-pass color +quantization, or single-pass quantization to an externally supplied color +map. This requires a 128Kb color lookup table plus strip buffers amounting +to about 40 bytes per column for typical sampling ratios (eg, about 25600 +bytes for a 640-pixel-wide image). You may not be able to process wide +images if you have large data structures of your own. + +Of course, all of these concerns vanish if you use a 32-bit flat-memory-model +compiler, such as DJGPP or Watcom C. We highly recommend flat model if you +can use it; the JPEG library is significantly faster in flat model. diff --git a/src/3rdparty/libjpeg/makcjpeg.st b/src/3rdparty/libjpeg/makcjpeg.st new file mode 100644 index 0000000..628f533 --- /dev/null +++ b/src/3rdparty/libjpeg/makcjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to cjpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +cjpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +cjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/src/3rdparty/libjpeg/makdjpeg.st b/src/3rdparty/libjpeg/makdjpeg.st new file mode 100644 index 0000000..4b61404 --- /dev/null +++ b/src/3rdparty/libjpeg/makdjpeg.st @@ -0,0 +1,36 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to djpeg.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +djpeg.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +djpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdcolmap.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrppm.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrgif.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrtarga.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrbmp.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +wrrle.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +libjpeg.lib ; built by libjpeg.prj +pcfltlib.lib ; floating point library +; the float library can be omitted if you've turned off DCT_FLOAT_SUPPORTED +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/src/3rdparty/libjpeg/makeadsw.vc6 b/src/3rdparty/libjpeg/makeadsw.vc6 new file mode 100644 index 0000000..80459c5 --- /dev/null +++ b/src/3rdparty/libjpeg/makeadsw.vc6 @@ -0,0 +1,77 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN! + +############################################################################### + +Project: "cjpeg"=".\cjpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "djpeg"=".\djpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "jpegtran"=".\jpegtran.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "rdjpgcom"=".\rdjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Project: "wrjpgcom"=".\wrjpgcom.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/src/3rdparty/libjpeg/makeasln.vc9 b/src/3rdparty/libjpeg/makeasln.vc9 new file mode 100644 index 0000000..c88ba8d --- /dev/null +++ b/src/3rdparty/libjpeg/makeasln.vc9 @@ -0,0 +1,33 @@ +‹¯¨ +Microsoft Visual Studio Solution File, Format Version 10.00 +# Visual C++ Express 2008 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "cjpeg", "cjpeg.vcproj", "{B4F61778-C45D-45C6-9E87-06F03F50519F}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "djpeg", "djpeg.vcproj", "{9B7E57AE-31CD-405E-8070-26A8303B9DC9}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpegtran", "jpegtran.vcproj", "{813C33AF-9031-49D2-BA19-93D600CDD404}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "rdjpgcom", "rdjpgcom.vcproj", "{EB107F86-A8CC-4507-8115-88D31DDE4CDF}" +EndProject +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "wrjpgcom", "wrjpgcom.vcproj", "{178670D7-FA7F-44A8-96C7-11B1CA14269C}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {B4F61778-C45D-45C6-9E87-06F03F50519F}.Release|Win32.ActiveCfg = Release|Win32 + {B4F61778-C45D-45C6-9E87-06F03F50519F}.Release|Win32.Build.0 = Release|Win32 + {9B7E57AE-31CD-405E-8070-26A8303B9DC9}.Release|Win32.ActiveCfg = Release|Win32 + {9B7E57AE-31CD-405E-8070-26A8303B9DC9}.Release|Win32.Build.0 = Release|Win32 + {813C33AF-9031-49D2-BA19-93D600CDD404}.Release|Win32.ActiveCfg = Release|Win32 + {813C33AF-9031-49D2-BA19-93D600CDD404}.Release|Win32.Build.0 = Release|Win32 + {EB107F86-A8CC-4507-8115-88D31DDE4CDF}.Release|Win32.ActiveCfg = Release|Win32 + {EB107F86-A8CC-4507-8115-88D31DDE4CDF}.Release|Win32.Build.0 = Release|Win32 + {178670D7-FA7F-44A8-96C7-11B1CA14269C}.Release|Win32.ActiveCfg = Release|Win32 + {178670D7-FA7F-44A8-96C7-11B1CA14269C}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/3rdparty/libjpeg/makecdep.vc6 b/src/3rdparty/libjpeg/makecdep.vc6 new file mode 100644 index 0000000..11dff77 --- /dev/null +++ b/src/3rdparty/libjpeg/makecdep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von cjpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\cjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\rdtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/src/3rdparty/libjpeg/makecdsp.vc6 b/src/3rdparty/libjpeg/makecdsp.vc6 new file mode 100644 index 0000000..3ab5965 --- /dev/null +++ b/src/3rdparty/libjpeg/makecdsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="cjpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=cjpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\cjpeg\Release" +# PROP BASE Intermediate_Dir ".\cjpeg\Release" +# PROP BASE Target_Dir ".\cjpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\cjpeg\Release" +# PROP Intermediate_Dir ".\cjpeg\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\cjpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "cjpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\cjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdbmp.c +# End Source File +# Begin Source File + +SOURCE=.\rdgif.c +# End Source File +# Begin Source File + +SOURCE=.\rdppm.c +# End Source File +# Begin Source File + +SOURCE=.\rdrle.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\rdtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/3rdparty/libjpeg/makecmak.vc6 b/src/3rdparty/libjpeg/makecmak.vc6 new file mode 100644 index 0000000..bee03bf --- /dev/null +++ b/src/3rdparty/libjpeg/makecmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on cjpeg.dsp +!IF "$(CFG)" == "" +CFG=cjpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. cjpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "cjpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "cjpeg.mak" CFG="cjpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "cjpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\cjpeg\Release +INTDIR=.\cjpeg\Release +# Begin Custom Macros +OutDir=.\cjpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\cjpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\cjpeg.obj" + -@erase "$(INTDIR)\rdbmp.obj" + -@erase "$(INTDIR)\rdgif.obj" + -@erase "$(INTDIR)\rdppm.obj" + -@erase "$(INTDIR)\rdrle.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\rdtarga.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\cjpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\cjpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\cjpeg.pdb" /machine:I386 /out:"$(OUTDIR)\cjpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\cjpeg.obj" \ + "$(INTDIR)\rdbmp.obj" \ + "$(INTDIR)\rdgif.obj" \ + "$(INTDIR)\rdppm.obj" \ + "$(INTDIR)\rdrle.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\rdtarga.obj" + +"$(OUTDIR)\cjpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\cjpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("cjpeg.dep") +!INCLUDE "cjpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "cjpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "cjpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\cjpeg.c + +"$(INTDIR)\cjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdbmp.c + +"$(INTDIR)\rdbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdgif.c + +"$(INTDIR)\rdgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdppm.c + +"$(INTDIR)\rdppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdrle.c + +"$(INTDIR)\rdrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdtarga.c + +"$(INTDIR)\rdtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/3rdparty/libjpeg/makecvcp.vc9 b/src/3rdparty/libjpeg/makecvcp.vc9 new file mode 100644 index 0000000..b38e6a1 --- /dev/null +++ b/src/3rdparty/libjpeg/makecvcp.vc9 @@ -0,0 +1,186 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/3rdparty/libjpeg/makeddep.vc6 b/src/3rdparty/libjpeg/makeddep.vc6 new file mode 100644 index 0000000..f911eba --- /dev/null +++ b/src/3rdparty/libjpeg/makeddep.vc6 @@ -0,0 +1,82 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von djpeg.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\djpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\rdcolmap.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrbmp.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrgif.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrppm.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrrle.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\wrtarga.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + diff --git a/src/3rdparty/libjpeg/makeddsp.vc6 b/src/3rdparty/libjpeg/makeddsp.vc6 new file mode 100644 index 0000000..f583a0f --- /dev/null +++ b/src/3rdparty/libjpeg/makeddsp.vc6 @@ -0,0 +1,130 @@ +# Microsoft Developer Studio Project File - Name="djpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=djpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\djpeg\Release" +# PROP BASE Intermediate_Dir ".\djpeg\Release" +# PROP BASE Target_Dir ".\djpeg" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\djpeg\Release" +# PROP Intermediate_Dir ".\djpeg\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\djpeg" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "djpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\djpeg.c +# End Source File +# Begin Source File + +SOURCE=.\rdcolmap.c +# End Source File +# Begin Source File + +SOURCE=.\wrbmp.c +# End Source File +# Begin Source File + +SOURCE=.\wrgif.c +# End Source File +# Begin Source File + +SOURCE=.\wrppm.c +# End Source File +# Begin Source File + +SOURCE=.\wrrle.c +# End Source File +# Begin Source File + +SOURCE=.\wrtarga.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/3rdparty/libjpeg/makedmak.vc6 b/src/3rdparty/libjpeg/makedmak.vc6 new file mode 100644 index 0000000..e16487f --- /dev/null +++ b/src/3rdparty/libjpeg/makedmak.vc6 @@ -0,0 +1,159 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on djpeg.dsp +!IF "$(CFG)" == "" +CFG=djpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. djpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "djpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "djpeg.mak" CFG="djpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "djpeg - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\djpeg\Release +INTDIR=.\djpeg\Release +# Begin Custom Macros +OutDir=.\djpeg\Release +# End Custom Macros + +ALL : "$(OUTDIR)\djpeg.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\djpeg.obj" + -@erase "$(INTDIR)\rdcolmap.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrbmp.obj" + -@erase "$(INTDIR)\wrgif.obj" + -@erase "$(INTDIR)\wrppm.obj" + -@erase "$(INTDIR)\wrrle.obj" + -@erase "$(INTDIR)\wrtarga.obj" + -@erase "$(OUTDIR)\djpeg.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\djpeg.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\djpeg.pdb" /machine:I386 /out:"$(OUTDIR)\djpeg.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\djpeg.obj" \ + "$(INTDIR)\rdcolmap.obj" \ + "$(INTDIR)\wrbmp.obj" \ + "$(INTDIR)\wrgif.obj" \ + "$(INTDIR)\wrppm.obj" \ + "$(INTDIR)\wrrle.obj" \ + "$(INTDIR)\wrtarga.obj" + +"$(OUTDIR)\djpeg.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\djpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("djpeg.dep") +!INCLUDE "djpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "djpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "djpeg - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\djpeg.c + +"$(INTDIR)\djpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdcolmap.c + +"$(INTDIR)\rdcolmap.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrbmp.c + +"$(INTDIR)\wrbmp.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrgif.c + +"$(INTDIR)\wrgif.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrppm.c + +"$(INTDIR)\wrppm.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrrle.c + +"$(INTDIR)\wrrle.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\wrtarga.c + +"$(INTDIR)\wrtarga.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/3rdparty/libjpeg/makedvcp.vc9 b/src/3rdparty/libjpeg/makedvcp.vc9 new file mode 100644 index 0000000..6f5bb1e --- /dev/null +++ b/src/3rdparty/libjpeg/makedvcp.vc9 @@ -0,0 +1,186 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/3rdparty/libjpeg/makefile.ansi b/src/3rdparty/libjpeg/makefile.ansi new file mode 100644 index 0000000..30e41c9 --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.ansi @@ -0,0 +1,220 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Unix-like systems with ANSI-capable compilers. +# If you have a non-ANSI compiler, makefile.unix is a better starting point. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +CFLAGS= -O +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= rm -f +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o cjpeg djpeg jpegtran libjpeg.a rdjpgcom wrjpgcom + $(RM) core testout* + +test: cjpeg djpeg jpegtran + $(RM) testout* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/3rdparty/libjpeg/makefile.bcc b/src/3rdparty/libjpeg/makefile.bcc new file mode 100644 index 0000000..c9e2311 --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.bcc @@ -0,0 +1,291 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Borland C on MS-DOS or OS/2. +# It works with Borland C++ for DOS, revision 3.0 or later, +# and has been tested with Borland C++ for OS/2. +# Watch out for optimization bugs in the OS/2 compilers --- see notes below! +# Thanks to Tom Wright and Ge' Weijers (original DOS) and +# Ken Porter (OS/2) for this file. + +# Read installation instructions before saying "make" !! + +# Are we under DOS or OS/2? +!if !$d(DOS) && !$d(OS2) +!if $d(__OS2__) +OS2=1 +!else +DOS=1 +!endif +!endif + +# The name of your C compiler: +CC= bcc + +# You may need to adjust these cc options: +!if $d(DOS) +CFLAGS= -O2 -mm -w-par -w-stu -w-ccc -w-rch +!else +CFLAGS= -O1 -w-par -w-stu -w-ccc -w-rch +!endif +# -O2 enables full code optimization (for pre-3.0 Borland C++, use -O -G -Z). +# -O2 is buggy in Borland OS/2 C++ revision 2.0, so use -O1 there for now. +# If you have Borland OS/2 C++ revision 1.0, use -O or no optimization at all. +# -mm selects medium memory model (near data, far code pointers; DOS only!) +# -w-par suppresses warnings about unused function parameters +# -w-stu suppresses warnings about incomplete structures +# -w-ccc suppresses warnings about compile-time-constant conditions +# -w-rch suppresses warnings about unreachable code +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!if $d(DOS) +LDFLAGS= -mm +# memory model option here must match CFLAGS! +!else +LDFLAGS= +# -lai full-screen app +# -lc case-significant link +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. +# For DOS, we recommend jmemdos.c and jmemdosa.asm. +# For OS/2, we recommend jmemnobs.c (flat memory!) +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +!if $d(DOS) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj +!else +SYSDEPMEM= jmemnobs.obj +SYSDEPMEMLIB= +jmemnobs.obj +!endif + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + tlib libjpeg.lib /E /C @&&| ++jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj +jcparam.obj & ++jdatadst.obj +jcinit.obj +jcmaster.obj +jcmarker.obj +jcmainct.obj & ++jcprepct.obj +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & ++jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj +jfdctint.obj +jdapimin.obj & ++jdapistd.obj +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & ++jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj +jdcoefct.obj & ++jdpostct.obj +jddctmgr.obj +jidctfst.obj +jidctflt.obj +jidctint.obj & ++jdsample.obj +jdcolor.obj +jquant1.obj +jquant2.obj +jdmerge.obj & ++jaricom.obj +jcomapi.obj +jutils.obj +jerror.obj +jmemmgr.obj & +$(SYSDEPMEMLIB) +| + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ecjpeg.exe $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -edjpeg.exe $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) -ejpegtran.exe $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c +!if $d(DOS) + $(CC) -ms -O rdjpgcom.c +!else + $(CC) $(CFLAGS) rdjpgcom.c +!endif + +# On DOS, wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c +!if $d(DOS) + $(CC) -ml -O wrjpgcom.c +!else + $(CC) $(CFLAGS) wrjpgcom.c +!endif + +# This "{}" syntax allows Borland Make to "batch" source files. +# In this way, each run of the compiler can build many modules. +.c.obj: + $(CC) $(CFLAGS) -c{ $<} + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!if $d(DOS) + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj: jmemdosa.asm + tasm /mx jmemdosa.asm diff --git a/src/3rdparty/libjpeg/makefile.dj b/src/3rdparty/libjpeg/makefile.dj new file mode 100644 index 0000000..14d0ee6 --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.dj @@ -0,0 +1,226 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for DJGPP (Delorie's GNU C port on MS-DOS), v2.0 or later. +# Thanks to Frank J. Donahoe for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= gcc + +# You may need to adjust these cc options: +CFLAGS= -O2 -Wall -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +LDFLAGS= -s + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= + +# Put here the object file name for the correct system-dependent memory +# manager file. For DJGPP this is usually jmemnobs.o, but you could +# use jmemname.o if you want to use named temp files instead of swap space. +SYSDEPMEM= jmemnobs.o + +# miscellaneous OS-dependent stuff +# linker +LN= $(CC) +# file deletion command +RM= del +# library (.a) file creation command +AR= ar rc +# second step in .a creation (use "touch" if not needed) +AR2= ranlib + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.a +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.a cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.a: $(LIBOBJECTS) + $(RM) libjpeg.a + $(AR) libjpeg.a $(LIBOBJECTS) + $(AR2) libjpeg.a + +cjpeg.exe: $(COBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o cjpeg.exe $(COBJECTS) libjpeg.a $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o djpeg.exe $(DOBJECTS) libjpeg.a $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.a + $(LN) $(LDFLAGS) -o jpegtran.exe $(TROBJECTS) libjpeg.a $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom.exe rdjpgcom.o $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom.exe wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + $(RM) *.o + $(RM) cjpeg.exe + $(RM) djpeg.exe + $(RM) jpegtran.exe + $(RM) rdjpgcom.exe + $(RM) wrjpgcom.exe + $(RM) libjpeg.a + $(RM) testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + $(RM) testout*.* + ./djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + ./djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + ./cjpeg -dct int -outfile testout.jpg testimg.ppm + ./djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + ./cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + ./jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/3rdparty/libjpeg/makefile.manx b/src/3rdparty/libjpeg/makefile.manx new file mode 100644 index 0000000..d1af57c --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.manx @@ -0,0 +1,220 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using Manx Aztec C ver 5.x. +# Thanks to D.J. James (djjames@cup.portal.com) for this version. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= cc + +# You may need to adjust these cc options: +# Uncomment for generic 68000 code (will work on any Amiga) +ARCHFLAGS= -sn + +# Uncomment for 68020/68030 code (faster, but won't run on 68000 CPU) +#ARCHFLAGS= -c2 + +CFLAGS= -MC -MD $(ARCHFLAGS) -spfam -r4 + +# Link-time cc options: +LDFLAGS= -g + +# To link any special libraries, add the necessary -l commands here. +LDLIBS= -lml -lcl + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= ln +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= lb + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg djpeg jpegtran rdjpgcom wrjpgcom + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib $(LIBOBJECTS) + +cjpeg: $(COBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o cjpeg $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg: $(DOBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o djpeg $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran: $(TROBJECTS) libjpeg.lib + $(LN) $(LDFLAGS) -o jpegtran $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom: rdjpgcom.o + $(LN) $(LDFLAGS) -o rdjpgcom rdjpgcom.o $(LDLIBS) + +wrjpgcom: wrjpgcom.o + $(LN) $(LDFLAGS) -o wrjpgcom wrjpgcom.o $(LDLIBS) + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + -$(RM) *.o cjpeg djpeg jpegtran libjpeg.lib rdjpgcom wrjpgcom + -$(RM) core testout*.* + +test: cjpeg djpeg jpegtran + -$(RM) testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + cmp testimg.ppm testout.ppm + cmp testimg.bmp testout.bmp + cmp testimg.jpg testout.jpg + cmp testimg.ppm testoutp.ppm + cmp testimgp.jpg testoutp.jpg + cmp testorig.jpg testoutt.jpg + + +jaricom.o: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.o: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.o: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.o: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.o: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.o: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.o: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.o: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.o: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.o: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.o: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.o: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.o: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.o: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.o: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.o: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.o: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.o: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.o: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.o: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.o: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.o: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.o: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.o: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.o: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.o: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.o: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.o: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.o: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.o: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.o: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.o: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.o: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.o: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.o: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.o: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.o: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.o: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.o: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.o: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.o: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.o: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.o: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.o: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.o: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.o: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.o: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.o: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.o: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.o: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.o: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.o: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.o: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.o: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.o: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.o: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.o: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.o: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.o: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.o: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.o: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.o: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.o: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.o: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.o: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.o: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.o: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.o: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.o: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/3rdparty/libjpeg/makefile.mc6 b/src/3rdparty/libjpeg/makefile.mc6 new file mode 100644 index 0000000..2e0c747 --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.mc6 @@ -0,0 +1,255 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Microsoft C for MS-DOS, version 6.00A and up. +# Use NMAKE, not Microsoft's brain-damaged MAKE. +# Thanks to Alan Wright and Chris Turner of Olivetti Research Ltd. + +# Read installation instructions before saying "nmake" !! + +# You may need to adjust these compiler options: +CFLAGS = -AM -Oecigt -Gs -W3 +# -AM medium memory model (or use -AS for small model, if you remove features) +# -Oecigt -Gs maximum safe optimisation (-Ol has bugs in MSC 6.00A) +# -W3 warning level 3 +# You might also want to add -G2 if you have an 80286, etc. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Jan-Herman Buining suggests the following switches for MS C 8.0 and a 486: +# CFLAGS = /AM /f- /FPi87 /G3 /Gs /Gy /Ob1 /Oc /Oe /Og /Oi /Ol /On /Oo /Ot \ +# /OV4 /W3 +# except for jquant1.c, which must be compiled with /Oo- to avoid a compiler +# crash. + +# Ingar Steinsland suggests the following switches when building +# a 16-bit Windows DLL: +# CFLAGS = -ALw -Gsw -Zpe -W3 -O2 -Zi -Zd + +# Put here the object file name for the correct system-dependent memory +# manager file. For DOS, we recommend jmemdos.c and jmemdosa.asm. +# (But not for Windows; see install.txt if you use this makefile for Windows.) +SYSDEPMEM= jmemdos.obj jmemdosa.obj +# SYSDEPMEMLIB must list the same files with "+" signs for the librarian. +SYSDEPMEMLIB= +jmemdos.obj +jmemdosa.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# need linker response file because file list > 128 chars +RFILE = libjpeg.ans + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) $(RFILE) + del libjpeg.lib + lib @$(RFILE) + +# linker response file for building libjpeg.lib +$(RFILE) : makefile + del $(RFILE) + echo libjpeg.lib >$(RFILE) +# silly want-to-create-it prompt: + echo y >>$(RFILE) + echo +jcapimin.obj +jcapistd.obj +jcarith.obj +jctrans.obj & >>$(RFILE) + echo +jcparam.obj +jdatadst.obj +jcinit.obj +jcmaster.obj & >>$(RFILE) + echo +jcmarker.obj +jcmainct.obj +jcprepct.obj & >>$(RFILE) + echo +jccoefct.obj +jccolor.obj +jcsample.obj +jchuff.obj & >>$(RFILE) + echo +jcdctmgr.obj +jfdctfst.obj +jfdctflt.obj & >>$(RFILE) + echo +jfdctint.obj +jdapimin.obj +jdapistd.obj & >>$(RFILE) + echo +jdarith.obj +jdtrans.obj +jdatasrc.obj +jdmaster.obj & >>$(RFILE) + echo +jdinput.obj +jdmarker.obj +jdhuff.obj +jdmainct.obj & >>$(RFILE) + echo +jdcoefct.obj +jdpostct.obj +jddctmgr.obj & >>$(RFILE) + echo +jidctfst.obj +jidctflt.obj +jidctint.obj & >>$(RFILE) + echo +jdsample.obj +jdcolor.obj +jquant1.obj & >>$(RFILE) + echo +jquant2.obj +jdmerge.obj +jaricom.obj +jcomapi.obj & >>$(RFILE) + echo +jutils.obj +jerror.obj +jmemmgr.obj & >>$(RFILE) + echo $(SYSDEPMEMLIB) ; >>$(RFILE) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + echo $(COBJECTS) >cjpeg.lst + link /STACK:4096 /EXEPACK @cjpeg.lst, cjpeg.exe, , libjpeg.lib, ; + del cjpeg.lst + +djpeg.exe: $(DOBJECTS) libjpeg.lib + echo $(DOBJECTS) >djpeg.lst + link /STACK:4096 /EXEPACK @djpeg.lst, djpeg.exe, , libjpeg.lib, ; + del djpeg.lst + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + link /STACK:4096 /EXEPACK $(TROBJECTS), jpegtran.exe, , libjpeg.lib, ; + +rdjpgcom.exe: rdjpgcom.c + $(CC) -AS -O -W3 rdjpgcom.c + +# wrjpgcom needs large model so it can malloc a 64K chunk +wrjpgcom.exe: wrjpgcom.c + $(CC) -AL -O -W3 wrjpgcom.c + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: + del *.obj + del libjpeg.lib + del cjpeg.exe + del djpeg.exe + del jpegtran.exe + del rdjpgcom.exe + del wrjpgcom.exe + del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe + del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +jmemdosa.obj : jmemdosa.asm + masm /mx $*; diff --git a/src/3rdparty/libjpeg/makefile.mms b/src/3rdparty/libjpeg/makefile.mms new file mode 100644 index 0000000..992c25f --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.mms @@ -0,0 +1,224 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for use with MMS on Digital VMS systems. +# Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +# and Tim Bell (tbell@netcom.com) for their help. + +# Read installation instructions before saying "MMS" !! + +# You may need to adjust these cc options: +CFLAGS= $(CFLAGS) /NoDebug /Optimize +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via /Define switches here. +.ifdef ALPHA +OPT= +.else +OPT= ,Sys$Disk:[]MAKVMS.OPT/Option +.endif + +# Put here the object file name for the correct system-dependent memory +# manager file. For Unix this is usually jmemnobs.o, but you may want +# to use jmemansi.o or jmemname.o if you have limited swap space. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.olb +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj +# objectfile lists with commas --- what a crock +COBJLIST= cjpeg.obj,rdppm.obj,rdgif.obj,rdtarga.obj,rdrle.obj,rdbmp.obj,\ + rdswitch.obj,cdjpeg.obj +DOBJLIST= djpeg.obj,wrppm.obj,wrgif.obj,wrtarga.obj,wrrle.obj,wrbmp.obj,\ + rdcolmap.obj,cdjpeg.obj +TROBJLIST= jpegtran.obj,rdswitch.obj,cdjpeg.obj,transupp.obj +LIBOBJLIST= jaricom.obj,jcapimin.obj,jcapistd.obj,jcarith.obj,jctrans.obj,\ + jcparam.obj,jdatadst.obj,jcinit.obj,jcmaster.obj,jcmarker.obj,\ + jcmainct.obj,jcprepct.obj,jccoefct.obj,jccolor.obj,jcsample.obj,\ + jchuff.obj,jcdctmgr.obj,jfdctfst.obj,jfdctflt.obj,jfdctint.obj,\ + jdapimin.obj,jdapistd.obj,jdarith.obj,jdtrans.obj,jdatasrc.obj,\ + jdmaster.obj,jdinput.obj,jdmarker.obj,jdhuff.obj,jdmainct.obj,\ + jdcoefct.obj,jdpostct.obj,jddctmgr.obj,jidctfst.obj,jidctflt.obj,\ + jidctint.obj,jdsample.obj,jdcolor.obj,jquant1.obj,jquant2.obj,\ + jdmerge.obj,jcomapi.obj,jutils.obj,jerror.obj,jmemmgr.obj,$(SYSDEPMEM) + + +.first + @- Define /NoLog Sys Sys$Library + +ALL : libjpeg.olb cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + @ Continue + +libjpeg.olb : $(LIBOBJECTS) + Library /Create libjpeg.olb $(LIBOBJLIST) + +cjpeg.exe : $(COBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = cjpeg.exe $(COBJLIST),libjpeg.olb/Library$(OPT) + +djpeg.exe : $(DOBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = djpeg.exe $(DOBJLIST),libjpeg.olb/Library$(OPT) + +jpegtran.exe : $(TROBJECTS) libjpeg.olb + $(LINK) $(LFLAGS) /Executable = jpegtran.exe $(TROBJLIST),libjpeg.olb/Library$(OPT) + +rdjpgcom.exe : rdjpgcom.obj + $(LINK) $(LFLAGS) /Executable = rdjpgcom.exe rdjpgcom.obj$(OPT) + +wrjpgcom.exe : wrjpgcom.obj + $(LINK) $(LFLAGS) /Executable = wrjpgcom.exe wrjpgcom.obj$(OPT) + +jconfig.h : jconfig.vms + @- Copy jconfig.vms jconfig.h + +clean : + @- Set Protection = Owner:RWED *.*;-1 + @- Set Protection = Owner:RWED *.OBJ + - Purge /NoLog /NoConfirm *.* + - Delete /NoLog /NoConfirm *.OBJ; + +test : cjpeg.exe djpeg.exe jpegtran.exe + mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm + mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg + - Backup /Compare/Log testimg.ppm testout.ppm + - Backup /Compare/Log testimg.bmp testout.bmp + - Backup /Compare/Log testimg.jpg testout.jpg + - Backup /Compare/Log testimg.ppm testoutp.ppm + - Backup /Compare/Log testimgp.jpg testoutp.jpg + - Backup /Compare/Log testorig.jpg testoutt.jpg + + +jaricom.obj : jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj : jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj : jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj : jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj : jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj : jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj : jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj : jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj : jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj : jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj : jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj : jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj : jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj : jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj : jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj : jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj : jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj : jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj : jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj : jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj : jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj : jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj : jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj : jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj : jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj : jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj : jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj : jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj : jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj : jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj : jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj : jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj : jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj : jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj : jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj : jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj : jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj : jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj : jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj : jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj : jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj : jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj : jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj : jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj : jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj : jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj : jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj : jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj : jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj : jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj : cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj : djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj : jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj : rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj : wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj : cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj : rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj : rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj : transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj : rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj : wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj : rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj : wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj : rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj : wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj : rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj : wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj : rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj : wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/3rdparty/libjpeg/makefile.sas b/src/3rdparty/libjpeg/makefile.sas new file mode 100644 index 0000000..c7a030c --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.sas @@ -0,0 +1,258 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is for Amiga systems using SAS C 6.0 and up. +# Thanks to Ed Hanway, Mark Rinfret, and Jim Zepeda. + +# Read installation instructions before saying "make" !! + +# The name of your C compiler: +CC= sc + +# You may need to adjust these cc options: +# Uncomment the following lines for generic 680x0 version +ARCHFLAGS= cpu=any +SUFFIX= + +# Uncomment the following lines for 68030-only version +#ARCHFLAGS= cpu=68030 +#SUFFIX=.030 + +CFLAGS= nostackcheck data=near parms=register optimize $(ARCHFLAGS) \ + ignore=104 ignore=304 ignore=306 +# ignore=104 disables warnings for mismatched const qualifiers +# ignore=304 disables warnings for variables being optimized out +# ignore=306 disables warnings for the inlining of functions +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via define switches here. + +# Link-time cc options: +LDFLAGS= SC SD ND BATCH + +# To link any special libraries, add the necessary commands here. +LDLIBS= LIB:scm.lib LIB:sc.lib + +# Put here the object file name for the correct system-dependent memory +# manager file. For Amiga we recommend jmemname.o. +SYSDEPMEM= jmemname.o + +# miscellaneous OS-dependent stuff +# linker +LN= slink +# file deletion command +RM= delete quiet +# library (.lib) file creation command +AR= oml + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.o jcomapi.o jutils.o jerror.o jmemmgr.o $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.o jcapistd.o jcarith.o jctrans.o jcparam.o \ + jdatadst.o jcinit.o jcmaster.o jcmarker.o jcmainct.o jcprepct.o \ + jccoefct.o jccolor.o jcsample.o jchuff.o jcdctmgr.o jfdctfst.o \ + jfdctflt.o jfdctint.o +# decompression library object files +DLIBOBJECTS= jdapimin.o jdapistd.o jdarith.o jdtrans.o jdatasrc.o \ + jdmaster.o jdinput.o jdmarker.o jdhuff.o jdmainct.o \ + jdcoefct.o jdpostct.o jddctmgr.o jidctfst.o jidctflt.o \ + jidctint.o jdsample.o jdcolor.o jquant1.o jquant2.o jdmerge.o +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.o rdppm.o rdgif.o rdtarga.o rdrle.o rdbmp.o rdswitch.o \ + cdjpeg.o +DOBJECTS= djpeg.o wrppm.o wrgif.o wrtarga.o wrrle.o wrbmp.o rdcolmap.o \ + cdjpeg.o +TROBJECTS= jpegtran.o rdswitch.o cdjpeg.o transupp.o + + +all: libjpeg.lib cjpeg$(SUFFIX) djpeg$(SUFFIX) jpegtran$(SUFFIX) rdjpgcom$(SUFFIX) wrjpgcom$(SUFFIX) + +# note: do several AR steps to avoid command line length limitations + +libjpeg.lib: $(LIBOBJECTS) + -$(RM) libjpeg.lib + $(AR) libjpeg.lib r $(CLIBOBJECTS) + $(AR) libjpeg.lib r $(DLIBOBJECTS) + $(AR) libjpeg.lib r $(COMOBJECTS) + +cjpeg$(SUFFIX): $(COBJECTS) libjpeg.lib + $(LN) + +# You may want to adjust these compiler options: +CFLAGS= $(cflags) $(cdebug) $(cvars) -I. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time options: +LDFLAGS= $(ldebug) $(conlflags) + +# To link any special libraries, add the necessary commands here. +LDLIBS= $(conlibs) + +# Put here the object file name for the correct system-dependent memory +# manager file. For NT we suggest jmemnobs.obj, which expects the OS to +# provide adequate virtual memory. +SYSDEPMEM= jmemnobs.obj + +# miscellaneous OS-dependent stuff +# file deletion command +RM= del + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c \ + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c \ + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c \ + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c \ + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c \ + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c \ + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c \ + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c \ + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c \ + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h \ + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 \ + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt \ + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc \ + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 \ + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 \ + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 \ + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 \ + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 \ + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 \ + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st \ + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms \ + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat \ + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas \ + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm \ + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg \ + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) \ + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj \ + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj \ + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj \ + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj \ + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj \ + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj \ + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj \ + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj \ + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj \ + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + +# Template command for compiling .c to .obj +.c.obj: + $(cc) $(CFLAGS) $*.c + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + $(RM) libjpeg.lib + lib -out:libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:cjpeg.exe $(COBJECTS) libjpeg.lib $(LDLIBS) + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:djpeg.exe $(DOBJECTS) libjpeg.lib $(LDLIBS) + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(link) $(LDFLAGS) -out:jpegtran.exe $(TROBJECTS) libjpeg.lib $(LDLIBS) + +rdjpgcom.exe: rdjpgcom.obj + $(link) $(LDFLAGS) -out:rdjpgcom.exe rdjpgcom.obj $(LDLIBS) + +wrjpgcom.exe: wrjpgcom.obj + $(link) $(LDFLAGS) -out:wrjpgcom.exe wrjpgcom.obj $(LDLIBS) + + +clean: + $(RM) *.obj *.exe libjpeg.lib + $(RM) testout* + +test: cjpeg.exe djpeg.exe jpegtran.exe + $(RM) testout* + .\djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + .\djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + .\cjpeg -dct int -outfile testout.jpg testimg.ppm + .\djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + .\cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + .\jpegtran -outfile testoutt.jpg testprog.jpg + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/3rdparty/libjpeg/makefile.vms b/src/3rdparty/libjpeg/makefile.vms new file mode 100644 index 0000000..a07d070 --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.vms @@ -0,0 +1,142 @@ +$! Makefile for Independent JPEG Group's software +$! +$! This is a command procedure for Digital VMS systems that do not have MMS. +$! It builds the JPEG software by brute force, recompiling everything whether +$! or not it is necessary. It then runs the basic self-test. +$! Thanks to Rick Dyson (dyson@iowasp.physics.uiowa.edu) +$! and Tim Bell (tbell@netcom.com) for their help. +$! +$! Read installation instructions before running this!! +$! +$ If F$Mode () .eqs. "INTERACTIVE" +$ Then +$ VERIFY = F$Verify (0) +$ Else +$ VERIFY = F$Verify (1) +$ EndIf +$ On Control_Y Then GoTo End +$ On Error Then GoTo End +$ +$ If F$GetSyi ("HW_MODEL") .gt. 1023 +$ Then +$ OPT = "" +$ Else +$ OPT = ",Sys$Disk:[]makvms.opt/Option" +$ EndIf +$ +$ DoCompile := CC /NoDebug /Optimize /NoList +$! +$ DoCompile jaricom.c +$ DoCompile jcapimin.c +$ DoCompile jcapistd.c +$ DoCompile jcarith.c +$ DoCompile jctrans.c +$ DoCompile jcparam.c +$ DoCompile jdatadst.c +$ DoCompile jcinit.c +$ DoCompile jcmaster.c +$ DoCompile jcmarker.c +$ DoCompile jcmainct.c +$ DoCompile jcprepct.c +$ DoCompile jccoefct.c +$ DoCompile jccolor.c +$ DoCompile jcsample.c +$ DoCompile jchuff.c +$ DoCompile jcdctmgr.c +$ DoCompile jfdctfst.c +$ DoCompile jfdctflt.c +$ DoCompile jfdctint.c +$ DoCompile jdapimin.c +$ DoCompile jdapistd.c +$ DoCompile jdarith.c +$ DoCompile jdtrans.c +$ DoCompile jdatasrc.c +$ DoCompile jdmaster.c +$ DoCompile jdinput.c +$ DoCompile jdmarker.c +$ DoCompile jdhuff.c +$ DoCompile jdmainct.c +$ DoCompile jdcoefct.c +$ DoCompile jdpostct.c +$ DoCompile jddctmgr.c +$ DoCompile jidctfst.c +$ DoCompile jidctflt.c +$ DoCompile jidctint.c +$ DoCompile jdsample.c +$ DoCompile jdcolor.c +$ DoCompile jquant1.c +$ DoCompile jquant2.c +$ DoCompile jdmerge.c +$ DoCompile jcomapi.c +$ DoCompile jutils.c +$ DoCompile jerror.c +$ DoCompile jmemmgr.c +$ DoCompile jmemnobs.c +$! +$ Library /Create libjpeg.olb jaricom.obj,jcapimin.obj,jcapistd.obj, - + jcarith.obj,jctrans.obj,jcparam.obj,jdatadst.obj,jcinit.obj, - + jcmaster.obj,jcmarker.obj,jcmainct.obj,jcprepct.obj,jccoefct.obj, - + jccolor.obj,jcsample.obj,jchuff.obj,jcdctmgr.obj,jfdctfst.obj, - + jfdctflt.obj,jfdctint.obj,jdapimin.obj,jdapistd.obj,jdarith.obj, - + jdtrans.obj,jdatasrc.obj,jdmaster.obj,jdinput.obj,jdmarker.obj, - + jdhuff.obj,jdmainct.obj,jdcoefct.obj,jdpostct.obj,jddctmgr.obj, - + jidctfst.obj,jidctflt.obj,jidctint.obj,jdsample.obj,jdcolor.obj, - + jquant1.obj,jquant2.obj,jdmerge.obj,jcomapi.obj,jutils.obj, - + jerror.obj,jmemmgr.obj,jmemnobs.obj +$! +$ DoCompile cjpeg.c +$ DoCompile rdppm.c +$ DoCompile rdgif.c +$ DoCompile rdtarga.c +$ DoCompile rdrle.c +$ DoCompile rdbmp.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = cjpeg.exe cjpeg.obj,rdppm.obj,rdgif.obj, - + rdtarga.obj,rdrle.obj,rdbmp.obj,rdswitch.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile djpeg.c +$ DoCompile wrppm.c +$ DoCompile wrgif.c +$ DoCompile wrtarga.c +$ DoCompile wrrle.c +$ DoCompile wrbmp.c +$ DoCompile rdcolmap.c +$ DoCompile cdjpeg.c +$! +$ Link /NoMap /Executable = djpeg.exe djpeg.obj,wrppm.obj,wrgif.obj, - + wrtarga.obj,wrrle.obj,wrbmp.obj,rdcolmap.obj,cdjpeg.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile jpegtran.c +$ DoCompile rdswitch.c +$ DoCompile cdjpeg.c +$ DoCompile transupp.c +$! +$ Link /NoMap /Executable = jpegtran.exe jpegtran.obj,rdswitch.obj, - + cdjpeg.obj,transupp.obj,libjpeg.olb/Library'OPT' +$! +$ DoCompile rdjpgcom.c +$ Link /NoMap /Executable = rdjpgcom.exe rdjpgcom.obj'OPT' +$! +$ DoCompile wrjpgcom.c +$ Link /NoMap /Executable = wrjpgcom.exe wrjpgcom.obj'OPT' +$! +$! Run the self-test +$! +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testout.ppm testorig.jpg +$ mcr sys$disk:[]djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg +$ mcr sys$disk:[]cjpeg -dct int -outfile testout.jpg testimg.ppm +$ mcr sys$disk:[]djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg +$ mcr sys$disk:[]cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm +$ mcr sys$disk:[]jpegtran -outfile testoutt.jpg testprog.jpg +$ Backup /Compare/Log testimg.ppm testout.ppm +$ Backup /Compare/Log testimg.bmp testout.bmp +$ Backup /Compare/Log testimg.jpg testout.jpg +$ Backup /Compare/Log testimg.ppm testoutp.ppm +$ Backup /Compare/Log testimgp.jpg testoutp.jpg +$ Backup /Compare/Log testorig.jpg testoutt.jpg +$! +$End: +$ If Verify Then Set Verify +$ Exit diff --git a/src/3rdparty/libjpeg/makefile.wat b/src/3rdparty/libjpeg/makefile.wat new file mode 100644 index 0000000..f7ef6e6 --- /dev/null +++ b/src/3rdparty/libjpeg/makefile.wat @@ -0,0 +1,239 @@ +# Makefile for Independent JPEG Group's software + +# This makefile is suitable for Watcom C/C++ 10.0 on MS-DOS (using +# dos4g extender), OS/2, and Windows NT console mode. +# Thanks to Janos Haide, jhaide@btrvtech.com. + +# Read installation instructions before saying "wmake" !! + +# Uncomment line for desired system +SYSTEM=DOS +#SYSTEM=OS2 +#SYSTEM=NT + +# The name of your C compiler: +CC= wcl386 + +# You may need to adjust these cc options: +CFLAGS= -4r -ort -wx -zq -bt=$(SYSTEM) +# Caution: avoid -ol or -ox; these generate bad code with 10.0 or 10.0a. +# Generally, we recommend defining any configuration symbols in jconfig.h, +# NOT via -D switches here. + +# Link-time cc options: +!ifeq SYSTEM DOS +LDFLAGS= -zq -l=dos4g +!else ifeq SYSTEM OS2 +LDFLAGS= -zq -l=os2v2 +!else ifeq SYSTEM NT +LDFLAGS= -zq -l=nt +!endif + +# Put here the object file name for the correct system-dependent memory +# manager file. jmemnobs should work fine for dos4g or OS/2 environment. +SYSDEPMEM= jmemnobs.obj + +# End of configurable options. + + +# source files: JPEG library proper +LIBSOURCES= jaricom.c jcapimin.c jcapistd.c jcarith.c jccoefct.c jccolor.c & + jcdctmgr.c jchuff.c jcinit.c jcmainct.c jcmarker.c jcmaster.c & + jcomapi.c jcparam.c jcprepct.c jcsample.c jctrans.c jdapimin.c & + jdapistd.c jdarith.c jdatadst.c jdatasrc.c jdcoefct.c jdcolor.c & + jddctmgr.c jdhuff.c jdinput.c jdmainct.c jdmarker.c jdmaster.c & + jdmerge.c jdpostct.c jdsample.c jdtrans.c jerror.c jfdctflt.c & + jfdctfst.c jfdctint.c jidctflt.c jidctfst.c jidctint.c jquant1.c & + jquant2.c jutils.c jmemmgr.c +# memmgr back ends: compile only one of these into a working library +SYSDEPSOURCES= jmemansi.c jmemname.c jmemnobs.c jmemdos.c jmemmac.c +# source files: cjpeg/djpeg/jpegtran applications, also rdjpgcom/wrjpgcom +APPSOURCES= cjpeg.c djpeg.c jpegtran.c rdjpgcom.c wrjpgcom.c cdjpeg.c & + rdcolmap.c rdswitch.c transupp.c rdppm.c wrppm.c rdgif.c wrgif.c & + rdtarga.c wrtarga.c rdbmp.c wrbmp.c rdrle.c wrrle.c +SOURCES= $(LIBSOURCES) $(SYSDEPSOURCES) $(APPSOURCES) +# files included by source files +INCLUDES= jdct.h jerror.h jinclude.h jmemsys.h jmorecfg.h jpegint.h & + jpeglib.h jversion.h cdjpeg.h cderror.h transupp.h +# documentation, test, and support files +DOCS= README install.txt usage.txt cjpeg.1 djpeg.1 jpegtran.1 rdjpgcom.1 & + wrjpgcom.1 wizard.txt example.c libjpeg.txt structure.txt & + coderules.txt filelist.txt change.log +MKFILES= configure Makefile.in makefile.ansi makefile.unix makefile.bcc & + makefile.mc6 makefile.dj makefile.wat makefile.vc makejdsw.vc6 & + makeadsw.vc6 makejdep.vc6 makejdsp.vc6 makejmak.vc6 makecdep.vc6 & + makecdsp.vc6 makecmak.vc6 makeddep.vc6 makeddsp.vc6 makedmak.vc6 & + maketdep.vc6 maketdsp.vc6 maketmak.vc6 makerdep.vc6 makerdsp.vc6 & + makermak.vc6 makewdep.vc6 makewdsp.vc6 makewmak.vc6 makejsln.vc9 & + makeasln.vc9 makejvcp.vc9 makecvcp.vc9 makedvcp.vc9 maketvcp.vc9 & + makervcp.vc9 makewvcp.vc9 makeproj.mac makcjpeg.st makdjpeg.st & + makljpeg.st maktjpeg.st makefile.manx makefile.sas makefile.mms & + makefile.vms makvms.opt +CONFIGFILES= jconfig.cfg jconfig.bcc jconfig.mc6 jconfig.dj jconfig.wat & + jconfig.vc jconfig.mac jconfig.st jconfig.manx jconfig.sas & + jconfig.vms +CONFIGUREFILES= config.guess config.sub install-sh ltmain.sh depcomp missing +OTHERFILES= jconfig.txt ckconfig.c ansi2knr.c ansi2knr.1 jmemdosa.asm & + libjpeg.map +TESTFILES= testorig.jpg testimg.ppm testimg.bmp testimg.jpg testprog.jpg & + testimgp.jpg +DISTFILES= $(DOCS) $(MKFILES) $(CONFIGFILES) $(SOURCES) $(INCLUDES) & + $(CONFIGUREFILES) $(OTHERFILES) $(TESTFILES) +# library object files common to compression and decompression +COMOBJECTS= jaricom.obj jcomapi.obj jutils.obj jerror.obj jmemmgr.obj $(SYSDEPMEM) +# compression library object files +CLIBOBJECTS= jcapimin.obj jcapistd.obj jcarith.obj jctrans.obj jcparam.obj & + jdatadst.obj jcinit.obj jcmaster.obj jcmarker.obj jcmainct.obj & + jcprepct.obj jccoefct.obj jccolor.obj jcsample.obj jchuff.obj & + jcdctmgr.obj jfdctfst.obj jfdctflt.obj jfdctint.obj +# decompression library object files +DLIBOBJECTS= jdapimin.obj jdapistd.obj jdarith.obj jdtrans.obj jdatasrc.obj & + jdmaster.obj jdinput.obj jdmarker.obj jdhuff.obj jdmainct.obj & + jdcoefct.obj jdpostct.obj jddctmgr.obj jidctfst.obj jidctflt.obj & + jidctint.obj jdsample.obj jdcolor.obj jquant1.obj jquant2.obj & + jdmerge.obj +# These objectfiles are included in libjpeg.lib +LIBOBJECTS= $(CLIBOBJECTS) $(DLIBOBJECTS) $(COMOBJECTS) +# object files for sample applications (excluding library files) +COBJECTS= cjpeg.obj rdppm.obj rdgif.obj rdtarga.obj rdrle.obj rdbmp.obj & + rdswitch.obj cdjpeg.obj +DOBJECTS= djpeg.obj wrppm.obj wrgif.obj wrtarga.obj wrrle.obj wrbmp.obj & + rdcolmap.obj cdjpeg.obj +TROBJECTS= jpegtran.obj rdswitch.obj cdjpeg.obj transupp.obj + + +all: libjpeg.lib cjpeg.exe djpeg.exe jpegtran.exe rdjpgcom.exe wrjpgcom.exe + +libjpeg.lib: $(LIBOBJECTS) + - del libjpeg.lib + * wlib -n libjpeg.lib $(LIBOBJECTS) + +cjpeg.exe: $(COBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(COBJECTS) libjpeg.lib + +djpeg.exe: $(DOBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(DOBJECTS) libjpeg.lib + +jpegtran.exe: $(TROBJECTS) libjpeg.lib + $(CC) $(LDFLAGS) $(TROBJECTS) libjpeg.lib + +rdjpgcom.exe: rdjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) rdjpgcom.c + +wrjpgcom.exe: wrjpgcom.c + $(CC) $(CFLAGS) $(LDFLAGS) wrjpgcom.c + +.c.obj: + $(CC) $(CFLAGS) -c $< + +jconfig.h: jconfig.txt + echo You must prepare a system-dependent jconfig.h file. + echo Please read the installation directions in install.txt. + exit 1 + +clean: .SYMBOLIC + - del *.obj + - del libjpeg.lib + - del cjpeg.exe + - del djpeg.exe + - del jpegtran.exe + - del rdjpgcom.exe + - del wrjpgcom.exe + - del testout*.* + +test: cjpeg.exe djpeg.exe jpegtran.exe .SYMBOLIC + - del testout*.* + djpeg -dct int -ppm -outfile testout.ppm testorig.jpg + djpeg -dct int -bmp -colors 256 -outfile testout.bmp testorig.jpg + cjpeg -dct int -outfile testout.jpg testimg.ppm + djpeg -dct int -ppm -outfile testoutp.ppm testprog.jpg + cjpeg -dct int -progressive -opt -outfile testoutp.jpg testimg.ppm + jpegtran -outfile testoutt.jpg testprog.jpg +!ifeq SYSTEM DOS + fc /b testimg.ppm testout.ppm + fc /b testimg.bmp testout.bmp + fc /b testimg.jpg testout.jpg + fc /b testimg.ppm testoutp.ppm + fc /b testimgp.jpg testoutp.jpg + fc /b testorig.jpg testoutt.jpg +!else + echo n > n.tmp + comp testimg.ppm testout.ppm < n.tmp + comp testimg.bmp testout.bmp < n.tmp + comp testimg.jpg testout.jpg < n.tmp + comp testimg.ppm testoutp.ppm < n.tmp + comp testimgp.jpg testoutp.jpg < n.tmp + comp testorig.jpg testoutt.jpg < n.tmp + del n.tmp +!endif + + +jaricom.obj: jaricom.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapimin.obj: jcapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcapistd.obj: jcapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcarith.obj: jcarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccoefct.obj: jccoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jccolor.obj: jccolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcdctmgr.obj: jcdctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jchuff.obj: jchuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcinit.obj: jcinit.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmainct.obj: jcmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmarker.obj: jcmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcmaster.obj: jcmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcomapi.obj: jcomapi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcparam.obj: jcparam.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcprepct.obj: jcprepct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jcsample.obj: jcsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jctrans.obj: jctrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapimin.obj: jdapimin.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdapistd.obj: jdapistd.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdarith.obj: jdarith.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdatadst.obj: jdatadst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdatasrc.obj: jdatasrc.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h +jdcoefct.obj: jdcoefct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdcolor.obj: jdcolor.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jddctmgr.obj: jddctmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jdhuff.obj: jdhuff.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdinput.obj: jdinput.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmainct.obj: jdmainct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmarker.obj: jdmarker.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmaster.obj: jdmaster.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdmerge.obj: jdmerge.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdpostct.obj: jdpostct.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdsample.obj: jdsample.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jdtrans.obj: jdtrans.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jerror.obj: jerror.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jversion.h jerror.h +jfdctflt.obj: jfdctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctfst.obj: jfdctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jfdctint.obj: jfdctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctflt.obj: jidctflt.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctfst.obj: jidctfst.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jidctint.obj: jidctint.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jdct.h +jquant1.obj: jquant1.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jquant2.obj: jquant2.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jutils.obj: jutils.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h +jmemmgr.obj: jmemmgr.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemansi.obj: jmemansi.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemname.obj: jmemname.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemnobs.obj: jmemnobs.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemdos.obj: jmemdos.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +jmemmac.obj: jmemmac.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h jmemsys.h +cjpeg.obj: cjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +djpeg.obj: djpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h jversion.h +jpegtran.obj: jpegtran.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h transupp.h jversion.h +rdjpgcom.obj: rdjpgcom.c jinclude.h jconfig.h +wrjpgcom.obj: wrjpgcom.c jinclude.h jconfig.h +cdjpeg.obj: cdjpeg.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdcolmap.obj: rdcolmap.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdswitch.obj: rdswitch.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +transupp.obj: transupp.c jinclude.h jconfig.h jpeglib.h jmorecfg.h jpegint.h jerror.h transupp.h +rdppm.obj: rdppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrppm.obj: wrppm.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdgif.obj: rdgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrgif.obj: wrgif.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdtarga.obj: rdtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrtarga.obj: wrtarga.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdbmp.obj: rdbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrbmp.obj: wrbmp.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +rdrle.obj: rdrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h +wrrle.obj: wrrle.c cdjpeg.h jinclude.h jconfig.h jpeglib.h jmorecfg.h jerror.h cderror.h diff --git a/src/3rdparty/libjpeg/makejdep.vc6 b/src/3rdparty/libjpeg/makejdep.vc6 new file mode 100644 index 0000000..1065b21 --- /dev/null +++ b/src/3rdparty/libjpeg/makejdep.vc6 @@ -0,0 +1,423 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpeg.mak + +.\jaricom.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jccolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcdctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jchuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcinit.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcomapi.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcparam.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcprepct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jcsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jctrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapimin.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdapistd.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdarith.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdatadst.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdatasrc.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jdcoefct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdcolor.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jddctmgr.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdhuff.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdinput.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmainct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmarker.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmaster.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdmerge.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdpostct.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdsample.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jdtrans.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jerror.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + + +.\jfdctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jfdctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctflt.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctfst.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jidctint.c : \ + ".\jconfig.h"\ + ".\jdct.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemmgr.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jmemnobs.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmemsys.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant1.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jquant2.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + + +.\jutils.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + diff --git a/src/3rdparty/libjpeg/makejdsp.vc6 b/src/3rdparty/libjpeg/makejdsp.vc6 new file mode 100644 index 0000000..738f1ab --- /dev/null +++ b/src/3rdparty/libjpeg/makejdsp.vc6 @@ -0,0 +1,285 @@ +# Microsoft Developer Studio Project File - Name="jpeg" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Static Library" 0x0104 + +CFG=jpeg - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\Release" +# PROP BASE Intermediate_Dir ".\Release" +# PROP BASE Target_Dir "" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\Release" +# PROP Intermediate_Dir ".\Release" +# PROP Target_Dir "" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /YX /FD /c +# ADD BASE RSC /l 0x407 +# ADD RSC /l 0x407 +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LIB32=link.exe -lib +# ADD BASE LIB32 /nologo +# ADD LIB32 /nologo +# Begin Target + +# Name "jpeg - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\jaricom.c +# End Source File +# Begin Source File + +SOURCE=.\jcapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jcapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jcarith.c +# End Source File +# Begin Source File + +SOURCE=.\jccoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jccolor.c +# End Source File +# Begin Source File + +SOURCE=.\jcdctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jchuff.c +# End Source File +# Begin Source File + +SOURCE=.\jcinit.c +# End Source File +# Begin Source File + +SOURCE=.\jcmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jcmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jcmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jcomapi.c +# End Source File +# Begin Source File + +SOURCE=.\jcparam.c +# End Source File +# Begin Source File + +SOURCE=.\jcprepct.c +# End Source File +# Begin Source File + +SOURCE=.\jcsample.c +# End Source File +# Begin Source File + +SOURCE=.\jctrans.c +# End Source File +# Begin Source File + +SOURCE=.\jdapimin.c +# End Source File +# Begin Source File + +SOURCE=.\jdapistd.c +# End Source File +# Begin Source File + +SOURCE=.\jdarith.c +# End Source File +# Begin Source File + +SOURCE=.\jdatadst.c +# End Source File +# Begin Source File + +SOURCE=.\jdatasrc.c +# End Source File +# Begin Source File + +SOURCE=.\jdcoefct.c +# End Source File +# Begin Source File + +SOURCE=.\jdcolor.c +# End Source File +# Begin Source File + +SOURCE=.\jddctmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jdhuff.c +# End Source File +# Begin Source File + +SOURCE=.\jdinput.c +# End Source File +# Begin Source File + +SOURCE=.\jdmainct.c +# End Source File +# Begin Source File + +SOURCE=.\jdmarker.c +# End Source File +# Begin Source File + +SOURCE=.\jdmaster.c +# End Source File +# Begin Source File + +SOURCE=.\jdmerge.c +# End Source File +# Begin Source File + +SOURCE=.\jdpostct.c +# End Source File +# Begin Source File + +SOURCE=.\jdsample.c +# End Source File +# Begin Source File + +SOURCE=.\jdtrans.c +# End Source File +# Begin Source File + +SOURCE=.\jerror.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jfdctint.c +# End Source File +# Begin Source File + +SOURCE=.\jidctflt.c +# End Source File +# Begin Source File + +SOURCE=.\jidctfst.c +# End Source File +# Begin Source File + +SOURCE=.\jidctint.c +# End Source File +# Begin Source File + +SOURCE=.\jmemmgr.c +# End Source File +# Begin Source File + +SOURCE=.\jmemnobs.c +# End Source File +# Begin Source File + +SOURCE=.\jquant1.c +# End Source File +# Begin Source File + +SOURCE=.\jquant2.c +# End Source File +# Begin Source File + +SOURCE=.\jutils.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jdct.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmemsys.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/3rdparty/libjpeg/makejdsw.vc6 b/src/3rdparty/libjpeg/makejdsw.vc6 new file mode 100644 index 0000000..d11fab1 --- /dev/null +++ b/src/3rdparty/libjpeg/makejdsw.vc6 @@ -0,0 +1,29 @@ +Microsoft Developer Studio Workspace File, Format Version 6.00 +# WARNUNG: DIESE ARBEITSBEREICHSDATEI DARF NICHT BEARBEITET ODER GEL™SCHT WERDEN! + +############################################################################### + +Project: "jpeg"=".\jpeg.dsp" - Package Owner=<4> + +Package=<5> +{{{ +}}} + +Package=<4> +{{{ +}}} + +############################################################################### + +Global: + +Package=<5> +{{{ +}}} + +Package=<3> +{{{ +}}} + +############################################################################### + diff --git a/src/3rdparty/libjpeg/makejmak.vc6 b/src/3rdparty/libjpeg/makejmak.vc6 new file mode 100644 index 0000000..1107336 --- /dev/null +++ b/src/3rdparty/libjpeg/makejmak.vc6 @@ -0,0 +1,425 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpeg.dsp +!IF "$(CFG)" == "" +CFG=jpeg - Win32 +!MESSAGE Keine Konfiguration angegeben. jpeg - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpeg - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpeg.mak" CFG="jpeg - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpeg - Win32" (basierend auf "Win32 (x86) Static Library") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +OUTDIR=.\Release +INTDIR=.\Release +# Begin Custom Macros +OutDir=.\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpeg.lib" + + +CLEAN : + -@erase "$(INTDIR)\jaricom.obj" + -@erase "$(INTDIR)\jcapimin.obj" + -@erase "$(INTDIR)\jcapistd.obj" + -@erase "$(INTDIR)\jcarith.obj" + -@erase "$(INTDIR)\jccoefct.obj" + -@erase "$(INTDIR)\jccolor.obj" + -@erase "$(INTDIR)\jcdctmgr.obj" + -@erase "$(INTDIR)\jchuff.obj" + -@erase "$(INTDIR)\jcinit.obj" + -@erase "$(INTDIR)\jcmainct.obj" + -@erase "$(INTDIR)\jcmarker.obj" + -@erase "$(INTDIR)\jcmaster.obj" + -@erase "$(INTDIR)\jcomapi.obj" + -@erase "$(INTDIR)\jcparam.obj" + -@erase "$(INTDIR)\jcprepct.obj" + -@erase "$(INTDIR)\jcsample.obj" + -@erase "$(INTDIR)\jctrans.obj" + -@erase "$(INTDIR)\jdapimin.obj" + -@erase "$(INTDIR)\jdapistd.obj" + -@erase "$(INTDIR)\jdarith.obj" + -@erase "$(INTDIR)\jdatadst.obj" + -@erase "$(INTDIR)\jdatasrc.obj" + -@erase "$(INTDIR)\jdcoefct.obj" + -@erase "$(INTDIR)\jdcolor.obj" + -@erase "$(INTDIR)\jddctmgr.obj" + -@erase "$(INTDIR)\jdhuff.obj" + -@erase "$(INTDIR)\jdinput.obj" + -@erase "$(INTDIR)\jdmainct.obj" + -@erase "$(INTDIR)\jdmarker.obj" + -@erase "$(INTDIR)\jdmaster.obj" + -@erase "$(INTDIR)\jdmerge.obj" + -@erase "$(INTDIR)\jdpostct.obj" + -@erase "$(INTDIR)\jdsample.obj" + -@erase "$(INTDIR)\jdtrans.obj" + -@erase "$(INTDIR)\jerror.obj" + -@erase "$(INTDIR)\jfdctflt.obj" + -@erase "$(INTDIR)\jfdctfst.obj" + -@erase "$(INTDIR)\jfdctint.obj" + -@erase "$(INTDIR)\jidctflt.obj" + -@erase "$(INTDIR)\jidctfst.obj" + -@erase "$(INTDIR)\jidctint.obj" + -@erase "$(INTDIR)\jmemmgr.obj" + -@erase "$(INTDIR)\jmemnobs.obj" + -@erase "$(INTDIR)\jquant1.obj" + -@erase "$(INTDIR)\jquant2.obj" + -@erase "$(INTDIR)\jutils.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpeg.lib" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +CPP=cl.exe +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_WINDOWS" /Fp"$(INTDIR)\jpeg.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +RSC=rc.exe +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpeg.bsc" +BSC32_SBRS= \ + +LIB32=link.exe -lib +LIB32_FLAGS=/nologo /out:"$(OUTDIR)\jpeg.lib" +LIB32_OBJS= \ + "$(INTDIR)\jaricom.obj" \ + "$(INTDIR)\jcapimin.obj" \ + "$(INTDIR)\jcapistd.obj" \ + "$(INTDIR)\jcarith.obj" \ + "$(INTDIR)\jccoefct.obj" \ + "$(INTDIR)\jccolor.obj" \ + "$(INTDIR)\jcdctmgr.obj" \ + "$(INTDIR)\jchuff.obj" \ + "$(INTDIR)\jcinit.obj" \ + "$(INTDIR)\jcmainct.obj" \ + "$(INTDIR)\jcmarker.obj" \ + "$(INTDIR)\jcmaster.obj" \ + "$(INTDIR)\jcomapi.obj" \ + "$(INTDIR)\jcparam.obj" \ + "$(INTDIR)\jcprepct.obj" \ + "$(INTDIR)\jcsample.obj" \ + "$(INTDIR)\jctrans.obj" \ + "$(INTDIR)\jdapimin.obj" \ + "$(INTDIR)\jdapistd.obj" \ + "$(INTDIR)\jdarith.obj" \ + "$(INTDIR)\jdatadst.obj" \ + "$(INTDIR)\jdatasrc.obj" \ + "$(INTDIR)\jdcoefct.obj" \ + "$(INTDIR)\jdcolor.obj" \ + "$(INTDIR)\jddctmgr.obj" \ + "$(INTDIR)\jdhuff.obj" \ + "$(INTDIR)\jdinput.obj" \ + "$(INTDIR)\jdmainct.obj" \ + "$(INTDIR)\jdmarker.obj" \ + "$(INTDIR)\jdmaster.obj" \ + "$(INTDIR)\jdmerge.obj" \ + "$(INTDIR)\jdpostct.obj" \ + "$(INTDIR)\jdsample.obj" \ + "$(INTDIR)\jdtrans.obj" \ + "$(INTDIR)\jerror.obj" \ + "$(INTDIR)\jfdctflt.obj" \ + "$(INTDIR)\jfdctfst.obj" \ + "$(INTDIR)\jfdctint.obj" \ + "$(INTDIR)\jidctflt.obj" \ + "$(INTDIR)\jidctfst.obj" \ + "$(INTDIR)\jidctint.obj" \ + "$(INTDIR)\jmemmgr.obj" \ + "$(INTDIR)\jmemnobs.obj" \ + "$(INTDIR)\jquant1.obj" \ + "$(INTDIR)\jquant2.obj" \ + "$(INTDIR)\jutils.obj" + +"$(OUTDIR)\jpeg.lib" : "$(OUTDIR)" $(DEF_FILE) $(LIB32_OBJS) + $(LIB32) @<< + $(LIB32_FLAGS) $(DEF_FLAGS) $(LIB32_OBJS) +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpeg.dep") +!INCLUDE "jpeg.dep" +!ELSE +!MESSAGE Warning: cannot find "jpeg.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpeg - Win32" +SOURCE=.\jaricom.c + +"$(INTDIR)\jaricom.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapimin.c + +"$(INTDIR)\jcapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcapistd.c + +"$(INTDIR)\jcapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcarith.c + +"$(INTDIR)\jcarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccoefct.c + +"$(INTDIR)\jccoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jccolor.c + +"$(INTDIR)\jccolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcdctmgr.c + +"$(INTDIR)\jcdctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jchuff.c + +"$(INTDIR)\jchuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcinit.c + +"$(INTDIR)\jcinit.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmainct.c + +"$(INTDIR)\jcmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmarker.c + +"$(INTDIR)\jcmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcmaster.c + +"$(INTDIR)\jcmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcomapi.c + +"$(INTDIR)\jcomapi.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcparam.c + +"$(INTDIR)\jcparam.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcprepct.c + +"$(INTDIR)\jcprepct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jcsample.c + +"$(INTDIR)\jcsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jctrans.c + +"$(INTDIR)\jctrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapimin.c + +"$(INTDIR)\jdapimin.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdapistd.c + +"$(INTDIR)\jdapistd.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdarith.c + +"$(INTDIR)\jdarith.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatadst.c + +"$(INTDIR)\jdatadst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdatasrc.c + +"$(INTDIR)\jdatasrc.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcoefct.c + +"$(INTDIR)\jdcoefct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdcolor.c + +"$(INTDIR)\jdcolor.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jddctmgr.c + +"$(INTDIR)\jddctmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdhuff.c + +"$(INTDIR)\jdhuff.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdinput.c + +"$(INTDIR)\jdinput.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmainct.c + +"$(INTDIR)\jdmainct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmarker.c + +"$(INTDIR)\jdmarker.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmaster.c + +"$(INTDIR)\jdmaster.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdmerge.c + +"$(INTDIR)\jdmerge.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdpostct.c + +"$(INTDIR)\jdpostct.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdsample.c + +"$(INTDIR)\jdsample.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jdtrans.c + +"$(INTDIR)\jdtrans.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jerror.c + +"$(INTDIR)\jerror.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctflt.c + +"$(INTDIR)\jfdctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctfst.c + +"$(INTDIR)\jfdctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jfdctint.c + +"$(INTDIR)\jfdctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctflt.c + +"$(INTDIR)\jidctflt.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctfst.c + +"$(INTDIR)\jidctfst.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jidctint.c + +"$(INTDIR)\jidctint.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemmgr.c + +"$(INTDIR)\jmemmgr.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jmemnobs.c + +"$(INTDIR)\jmemnobs.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant1.c + +"$(INTDIR)\jquant1.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jquant2.c + +"$(INTDIR)\jquant2.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jutils.c + +"$(INTDIR)\jutils.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/3rdparty/libjpeg/makejsln.vc9 b/src/3rdparty/libjpeg/makejsln.vc9 new file mode 100644 index 0000000..ddb6a30 --- /dev/null +++ b/src/3rdparty/libjpeg/makejsln.vc9 @@ -0,0 +1,17 @@ +‹¯¨ +Microsoft Visual Studio Solution File, Format Version 10.00 +# Visual C++ Express 2008 +Project("{8BC9CEB8-8B4A-11D0-8D11-00A0C91BC942}") = "jpeg", "jpeg.vcproj", "{E61592E1-28F4-4AFC-9EE1-9BE833A061C1}" +EndProject +Global + GlobalSection(SolutionConfigurationPlatforms) = preSolution + Release|Win32 = Release|Win32 + EndGlobalSection + GlobalSection(ProjectConfigurationPlatforms) = postSolution + {E61592E1-28F4-4AFC-9EE1-9BE833A061C1}.Release|Win32.ActiveCfg = Release|Win32 + {E61592E1-28F4-4AFC-9EE1-9BE833A061C1}.Release|Win32.Build.0 = Release|Win32 + EndGlobalSection + GlobalSection(SolutionProperties) = preSolution + HideSolutionNode = FALSE + EndGlobalSection +EndGlobal diff --git a/src/3rdparty/libjpeg/makejvcp.vc9 b/src/3rdparty/libjpeg/makejvcp.vc9 new file mode 100644 index 0000000..b08809b --- /dev/null +++ b/src/3rdparty/libjpeg/makejvcp.vc9 @@ -0,0 +1,328 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/3rdparty/libjpeg/makeproj.mac b/src/3rdparty/libjpeg/makeproj.mac new file mode 100644 index 0000000..e5b5102 --- /dev/null +++ b/src/3rdparty/libjpeg/makeproj.mac @@ -0,0 +1,213 @@ +-- +-- makeproj.mac +-- +-- This AppleScript builds Code Warrior PRO Release 2 project files for the +-- libjpeg library as well as the test programs 'cjpeg', 'djpeg', 'jpegtran'. +-- (We'd distribute real project files, except they're not text +-- and would create maintenance headaches.) +-- +-- The script then compiles and links the library and the test programs. +-- NOTE: if you haven't already created a 'jconfig.h' file, the script +-- automatically copies 'jconfig.mac' to 'jconfig.h'. +-- +-- To use this script, you must have AppleScript 1.1 or later installed +-- and a suitable AppleScript editor like Script Editor or Script Debugger +-- (http://www.latenightsw.com). Open this file with your AppleScript +-- editor and execute the "run" command to build the projects. +-- +-- Thanks to Dan Sears and Don Agro for this script. +-- Questions about this script can be addressed to dogpark@interlog.com +-- + +on run + + choose folder with prompt ">>> Select IJG source folder <<<" + set ijg_folder to result + + choose folder with prompt ">>> Select MetroWerks folder <<<" + set cw_folder to result + + -- if jconfig.h doesn't already exist, copy jconfig.mac + + tell application "Finder" + if not (exists file "jconfig.h" of ijg_folder) then + duplicate {file "jconfig.mac" of folder ijg_folder} + select file "jconfig.mac copy" of folder ijg_folder + set name of selection to "jconfig.h" + end if + end tell + + tell application "CodeWarrior IDE 2.1" + with timeout of 10000 seconds + + -- create libjpeg project + + activate + Create Project (ijg_folder as string) & "libjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"libjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"libjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "PPC Project" to {Project Type:library} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jaricom.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jcapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jcarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jctrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jcparam.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatadst.c" To Segment 1 + Add Files (ijg_folder as string) & "jcinit.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jcmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jcprepct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jccolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jcsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jchuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jcdctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jfdctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapimin.c" To Segment 1 + Add Files (ijg_folder as string) & "jdapistd.c" To Segment 1 + Add Files (ijg_folder as string) & "jdarith.c" To Segment 1 + Add Files (ijg_folder as string) & "jdtrans.c" To Segment 1 + Add Files (ijg_folder as string) & "jdatasrc.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmaster.c" To Segment 1 + Add Files (ijg_folder as string) & "jdinput.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmarker.c" To Segment 1 + Add Files (ijg_folder as string) & "jdhuff.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmainct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcoefct.c" To Segment 1 + Add Files (ijg_folder as string) & "jdpostct.c" To Segment 1 + Add Files (ijg_folder as string) & "jddctmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctfst.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctflt.c" To Segment 1 + Add Files (ijg_folder as string) & "jidctint.c" To Segment 1 + Add Files (ijg_folder as string) & "jdsample.c" To Segment 1 + Add Files (ijg_folder as string) & "jdcolor.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant1.c" To Segment 1 + Add Files (ijg_folder as string) & "jquant2.c" To Segment 1 + Add Files (ijg_folder as string) & "jdmerge.c" To Segment 1 + Add Files (ijg_folder as string) & "jcomapi.c" To Segment 1 + Add Files (ijg_folder as string) & "jutils.c" To Segment 1 + Add Files (ijg_folder as string) & "jerror.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmgr.c" To Segment 1 + Add Files (ijg_folder as string) & "jmemmac.c" To Segment 1 + + -- compile and link the library + + Make Project + Close Project + + -- create cjpeg project + + activate + Create Project (ijg_folder as string) & "cjpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"cjpeg"} + Set Preferences of panel "PPC Project" to {File Name:"cjpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "cjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "rdppm.c" To Segment 1 + Add Files (ijg_folder as string) & "rdgif.c" To Segment 1 + Add Files (ijg_folder as string) & "rdtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "rdrle.c" To Segment 1 + Add Files (ijg_folder as string) & "rdbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link cjpeg + + Make Project + Close Project + + -- create djpeg project + + activate + Create Project (ijg_folder as string) & "djpeg.proj" + Set Preferences of panel "Target Settings" to {Target Name:"djpeg"} + Set Preferences of panel "PPC Project" to {File Name:"djpeg"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "djpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "wrppm.c" To Segment 1 + Add Files (ijg_folder as string) & "wrgif.c" To Segment 1 + Add Files (ijg_folder as string) & "wrtarga.c" To Segment 1 + Add Files (ijg_folder as string) & "wrrle.c" To Segment 1 + Add Files (ijg_folder as string) & "wrbmp.c" To Segment 1 + Add Files (ijg_folder as string) & "rdcolmap.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link djpeg + + Make Project + Close Project + + -- create jpegtran project + + activate + Create Project (ijg_folder as string) & "jpegtran.proj" + Set Preferences of panel "Target Settings" to {Target Name:"jpegtran"} + Set Preferences of panel "PPC Project" to {File Name:"jpegtran"} + Set Preferences of panel "Target Settings" to {Linker:"MacOS PPC Linker"} + Set Preferences of panel "C/C++ Compiler" to {ANSI Strict:true} + Set Preferences of panel "C/C++ Compiler" to {Enums Always Ints:true} + Set Preferences of panel "PPC Codegen" to {Struct Alignment:PowerPC} + Set Preferences of panel "PPC Linker" to {Generate SYM File:false} + + Add Files (ijg_folder as string) & "jpegtran.c" To Segment 1 + Add Files (ijg_folder as string) & "rdswitch.c" To Segment 1 + Add Files (ijg_folder as string) & "cdjpeg.c" To Segment 1 + Add Files (ijg_folder as string) & "transupp.c" To Segment 1 + + Add Files (ijg_folder as string) & "libjpeg" To Segment 2 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL C.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:Metrowerks Standard Library:MSL C:Bin:MSL SIOUX.PPC.Lib" To Segment 3 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:Runtime:Runtime PPC:MSL RuntimePPC.Lib" To Segment 3 + + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:InterfaceLib" To Segment 4 + Add Files (cw_folder as string) & "Metrowerks CodeWarrior:MacOS Support:Libraries:MacOS Common:MathLib" To Segment 4 + + -- compile and link jpegtran + + Make Project + Close Project + + quit + + end timeout + end tell +end run diff --git a/src/3rdparty/libjpeg/makerdep.vc6 b/src/3rdparty/libjpeg/makerdep.vc6 new file mode 100644 index 0000000..94748d0 --- /dev/null +++ b/src/3rdparty/libjpeg/makerdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von rdjpgcom.mak + +.\rdjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/src/3rdparty/libjpeg/makerdsp.vc6 b/src/3rdparty/libjpeg/makerdsp.vc6 new file mode 100644 index 0000000..60de09a --- /dev/null +++ b/src/3rdparty/libjpeg/makerdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="rdjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=rdjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\rdjpgcom\Release" +# PROP BASE Intermediate_Dir ".\rdjpgcom\Release" +# PROP BASE Target_Dir ".\rdjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\rdjpgcom\Release" +# PROP Intermediate_Dir ".\rdjpgcom\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\rdjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "rdjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\rdjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/3rdparty/libjpeg/makermak.vc6 b/src/3rdparty/libjpeg/makermak.vc6 new file mode 100644 index 0000000..6d2d4c7 --- /dev/null +++ b/src/3rdparty/libjpeg/makermak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on rdjpgcom.dsp +!IF "$(CFG)" == "" +CFG=rdjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. rdjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "rdjpgcom - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "rdjpgcom.mak" CFG="rdjpgcom - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "rdjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\rdjpgcom\Release +INTDIR=.\rdjpgcom\Release +# Begin Custom Macros +OutDir=.\rdjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\rdjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\rdjpgcom.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\rdjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\rdjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\rdjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\rdjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\rdjpgcom.obj" + +"$(OUTDIR)\rdjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\rdjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("rdjpgcom.dep") +!INCLUDE "rdjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "rdjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "rdjpgcom - Win32" +SOURCE=.\rdjpgcom.c + +"$(INTDIR)\rdjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/3rdparty/libjpeg/makervcp.vc9 b/src/3rdparty/libjpeg/makervcp.vc9 new file mode 100644 index 0000000..2f73ffc --- /dev/null +++ b/src/3rdparty/libjpeg/makervcp.vc9 @@ -0,0 +1,133 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/3rdparty/libjpeg/maketdep.vc6 b/src/3rdparty/libjpeg/maketdep.vc6 new file mode 100644 index 0000000..e177ecb --- /dev/null +++ b/src/3rdparty/libjpeg/maketdep.vc6 @@ -0,0 +1,43 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von jpegtran.mak + +.\cdjpeg.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\jpegtran.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + ".\jversion.h"\ + ".\transupp.h"\ + + +.\rdswitch.c : \ + ".\cderror.h"\ + ".\cdjpeg.h"\ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpeglib.h"\ + + +.\transupp.c : \ + ".\jconfig.h"\ + ".\jerror.h"\ + ".\jinclude.h"\ + ".\jmorecfg.h"\ + ".\jpegint.h"\ + ".\jpeglib.h"\ + ".\transupp.h"\ + diff --git a/src/3rdparty/libjpeg/maketdsp.vc6 b/src/3rdparty/libjpeg/maketdsp.vc6 new file mode 100644 index 0000000..fe1ae9a --- /dev/null +++ b/src/3rdparty/libjpeg/maketdsp.vc6 @@ -0,0 +1,122 @@ +# Microsoft Developer Studio Project File - Name="jpegtran" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=jpegtran - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\jpegtran\Release" +# PROP BASE Intermediate_Dir ".\jpegtran\Release" +# PROP BASE Target_Dir ".\jpegtran" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\jpegtran\Release" +# PROP Intermediate_Dir ".\jpegtran\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\jpegtran" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "jpegtran - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\cdjpeg.c +# End Source File +# Begin Source File + +SOURCE=.\jpegtran.c +# End Source File +# Begin Source File + +SOURCE=.\rdswitch.c +# End Source File +# Begin Source File + +SOURCE=.\transupp.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\cderror.h +# End Source File +# Begin Source File + +SOURCE=.\cdjpeg.h +# End Source File +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jerror.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# Begin Source File + +SOURCE=.\jmorecfg.h +# End Source File +# Begin Source File + +SOURCE=.\jpegint.h +# End Source File +# Begin Source File + +SOURCE=.\jpeglib.h +# End Source File +# Begin Source File + +SOURCE=.\jversion.h +# End Source File +# Begin Source File + +SOURCE=.\transupp.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/3rdparty/libjpeg/maketmak.vc6 b/src/3rdparty/libjpeg/maketmak.vc6 new file mode 100644 index 0000000..a0de38c --- /dev/null +++ b/src/3rdparty/libjpeg/maketmak.vc6 @@ -0,0 +1,131 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on jpegtran.dsp +!IF "$(CFG)" == "" +CFG=jpegtran - Win32 +!MESSAGE Keine Konfiguration angegeben. jpegtran - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "jpegtran - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "jpegtran.mak" CFG="jpegtran - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "jpegtran - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\jpegtran\Release +INTDIR=.\jpegtran\Release +# Begin Custom Macros +OutDir=.\jpegtran\Release +# End Custom Macros + +ALL : "$(OUTDIR)\jpegtran.exe" + + +CLEAN : + -@erase "$(INTDIR)\cdjpeg.obj" + -@erase "$(INTDIR)\jpegtran.obj" + -@erase "$(INTDIR)\rdswitch.obj" + -@erase "$(INTDIR)\transupp.obj" + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(OUTDIR)\jpegtran.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\jpegtran.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\jpegtran.pdb" /machine:I386 /out:"$(OUTDIR)\jpegtran.exe" +LINK32_OBJS= \ + "$(INTDIR)\cdjpeg.obj" \ + "$(INTDIR)\jpegtran.obj" \ + "$(INTDIR)\rdswitch.obj" \ + "$(INTDIR)\transupp.obj" + +"$(OUTDIR)\jpegtran.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\jpegtran.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("jpegtran.dep") +!INCLUDE "jpegtran.dep" +!ELSE +!MESSAGE Warning: cannot find "jpegtran.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "jpegtran - Win32" +SOURCE=.\cdjpeg.c + +"$(INTDIR)\cdjpeg.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\jpegtran.c + +"$(INTDIR)\jpegtran.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\rdswitch.c + +"$(INTDIR)\rdswitch.obj" : $(SOURCE) "$(INTDIR)" + + +SOURCE=.\transupp.c + +"$(INTDIR)\transupp.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/3rdparty/libjpeg/maketvcp.vc9 b/src/3rdparty/libjpeg/maketvcp.vc9 new file mode 100644 index 0000000..af0348d --- /dev/null +++ b/src/3rdparty/libjpeg/maketvcp.vc9 @@ -0,0 +1,178 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/3rdparty/libjpeg/makewdep.vc6 b/src/3rdparty/libjpeg/makewdep.vc6 new file mode 100644 index 0000000..15929bf --- /dev/null +++ b/src/3rdparty/libjpeg/makewdep.vc6 @@ -0,0 +1,6 @@ +# Microsoft Developer Studio erstellte Abh„ngigkeitsdatei, einbezogen von wrjpgcom.mak + +.\wrjpgcom.c : \ + ".\jconfig.h"\ + ".\jinclude.h"\ + diff --git a/src/3rdparty/libjpeg/makewdsp.vc6 b/src/3rdparty/libjpeg/makewdsp.vc6 new file mode 100644 index 0000000..2063b1a --- /dev/null +++ b/src/3rdparty/libjpeg/makewdsp.vc6 @@ -0,0 +1,78 @@ +# Microsoft Developer Studio Project File - Name="wrjpgcom" - Package Owner=<4> +# Microsoft Developer Studio Generated Build File, Format Version 6.00 +# ** NICHT BEARBEITEN ** + +# TARGTYPE "Win32 (x86) Console Application" 0x0103 + +CFG=wrjpgcom - Win32 +!MESSAGE Dies ist kein gltiges Makefile. Zum Erstellen dieses Projekts mit NMAKE +!MESSAGE verwenden Sie den Befehl "Makefile exportieren" und fhren Sie den Befehl +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak". +!MESSAGE +!MESSAGE Sie k÷nnen beim Ausfhren von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Fr die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE + +# Begin Project +# PROP AllowPerConfigDependencies 0 +# PROP Scc_ProjName "" +# PROP Scc_LocalPath "" +CPP=cl.exe +RSC=rc.exe +# PROP BASE Use_MFC 0 +# PROP BASE Use_Debug_Libraries 0 +# PROP BASE Output_Dir ".\wrjpgcom\Release" +# PROP BASE Intermediate_Dir ".\wrjpgcom\Release" +# PROP BASE Target_Dir ".\wrjpgcom" +# PROP Use_MFC 0 +# PROP Use_Debug_Libraries 0 +# PROP Output_Dir ".\wrjpgcom\Release" +# PROP Intermediate_Dir ".\wrjpgcom\Release" +# PROP Ignore_Export_Lib 0 +# PROP Target_Dir ".\wrjpgcom" +# ADD BASE CPP /nologo /W3 /GX /O2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /c +# ADD CPP /nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /YX /FD /c +# ADD BASE RSC /l 0x409 /d "NDEBUG" +# ADD RSC /l 0x409 /d "NDEBUG" +BSC32=bscmake.exe +# ADD BASE BSC32 /nologo +# ADD BSC32 /nologo +LINK32=link.exe +# ADD BASE LINK32 kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# ADD LINK32 Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /machine:I386 +# Begin Target + +# Name "wrjpgcom - Win32" +# Begin Group "Quellcodedateien" + +# PROP Default_Filter "cpp;c;cxx;rc;def;r;odl;idl;hpj;bat;for;f90" +# Begin Source File + +SOURCE=.\wrjpgcom.c +# End Source File +# End Group +# Begin Group "Header-Dateien" + +# PROP Default_Filter "h;hpp;hxx;hm;inl;fi;fd" +# Begin Source File + +SOURCE=.\jconfig.h +# End Source File +# Begin Source File + +SOURCE=.\jinclude.h +# End Source File +# End Group +# Begin Group "Ressourcendateien" + +# PROP Default_Filter "ico;cur;bmp;dlg;rc2;rct;bin;cnt;rtf;gif;jpg;jpeg;jpe" +# End Group +# End Target +# End Project diff --git a/src/3rdparty/libjpeg/makewmak.vc6 b/src/3rdparty/libjpeg/makewmak.vc6 new file mode 100644 index 0000000..22b9086 --- /dev/null +++ b/src/3rdparty/libjpeg/makewmak.vc6 @@ -0,0 +1,110 @@ +# Microsoft Developer Studio Generated NMAKE File, Based on wrjpgcom.dsp +!IF "$(CFG)" == "" +CFG=wrjpgcom - Win32 +!MESSAGE Keine Konfiguration angegeben. wrjpgcom - Win32 wird als Standard verwendet. +!ENDIF + +!IF "$(CFG)" != "wrjpgcom - Win32" +!MESSAGE Ungültige Konfiguration "$(CFG)" angegeben. +!MESSAGE Sie können beim Ausführen von NMAKE eine Konfiguration angeben +!MESSAGE durch Definieren des Makros CFG in der Befehlszeile. Zum Beispiel: +!MESSAGE +!MESSAGE NMAKE /f "wrjpgcom.mak" CFG="wrjpgcom - Win32" +!MESSAGE +!MESSAGE Für die Konfiguration stehen zur Auswahl: +!MESSAGE +!MESSAGE "wrjpgcom - Win32" (basierend auf "Win32 (x86) Console Application") +!MESSAGE +!ERROR Eine ungültige Konfiguration wurde angegeben. +!ENDIF + +!IF "$(OS)" == "Windows_NT" +NULL= +!ELSE +NULL=nul +!ENDIF + +CPP=cl.exe +RSC=rc.exe +OUTDIR=.\wrjpgcom\Release +INTDIR=.\wrjpgcom\Release +# Begin Custom Macros +OutDir=.\wrjpgcom\Release +# End Custom Macros + +ALL : "$(OUTDIR)\wrjpgcom.exe" + + +CLEAN : + -@erase "$(INTDIR)\vc60.idb" + -@erase "$(INTDIR)\wrjpgcom.obj" + -@erase "$(OUTDIR)\wrjpgcom.exe" + +"$(OUTDIR)" : + if not exist "$(OUTDIR)/$(NULL)" mkdir "$(OUTDIR)" + +BSC32=bscmake.exe +BSC32_FLAGS=/nologo /o"$(OUTDIR)\wrjpgcom.bsc" +BSC32_SBRS= \ + +LINK32=link.exe +LINK32_FLAGS=Release\jpeg.lib kernel32.lib user32.lib gdi32.lib winspool.lib comdlg32.lib advapi32.lib shell32.lib ole32.lib oleaut32.lib uuid.lib odbc32.lib odbccp32.lib /nologo /subsystem:console /incremental:no /pdb:"$(OUTDIR)\wrjpgcom.pdb" /machine:I386 /out:"$(OUTDIR)\wrjpgcom.exe" +LINK32_OBJS= \ + "$(INTDIR)\wrjpgcom.obj" + +"$(OUTDIR)\wrjpgcom.exe" : "$(OUTDIR)" $(DEF_FILE) $(LINK32_OBJS) + $(LINK32) @<< + $(LINK32_FLAGS) $(LINK32_OBJS) +<< + +CPP_PROJ=/nologo /G6 /MT /W3 /GX /Ox /Oa /Ob2 /D "WIN32" /D "NDEBUG" /D "_CONSOLE" /Fp"$(INTDIR)\wrjpgcom.pch" /YX /Fo"$(INTDIR)\\" /Fd"$(INTDIR)\\" /FD /c + +.c{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.obj:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.c{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cpp{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + +.cxx{$(INTDIR)}.sbr:: + $(CPP) @<< + $(CPP_PROJ) $< +<< + + +!IF "$(NO_EXTERNAL_DEPS)" != "1" +!IF EXISTS("wrjpgcom.dep") +!INCLUDE "wrjpgcom.dep" +!ELSE +!MESSAGE Warning: cannot find "wrjpgcom.dep" +!ENDIF +!ENDIF + + +!IF "$(CFG)" == "wrjpgcom - Win32" +SOURCE=.\wrjpgcom.c + +"$(INTDIR)\wrjpgcom.obj" : $(SOURCE) "$(INTDIR)" + + + +!ENDIF + diff --git a/src/3rdparty/libjpeg/makewvcp.vc9 b/src/3rdparty/libjpeg/makewvcp.vc9 new file mode 100644 index 0000000..196de0c --- /dev/null +++ b/src/3rdparty/libjpeg/makewvcp.vc9 @@ -0,0 +1,133 @@ + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + diff --git a/src/3rdparty/libjpeg/makljpeg.st b/src/3rdparty/libjpeg/makljpeg.st new file mode 100644 index 0000000..cc1ba01 --- /dev/null +++ b/src/3rdparty/libjpeg/makljpeg.st @@ -0,0 +1,68 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to libjpeg.prj. +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +libjpeg.lib +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost +.L[-J] ; link new Obj-format (so we get a library) += +; * * * * List of modules * * * * +jaricom.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jccolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcdctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jchuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcinit.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcomapi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcparam.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcprepct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jcsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jctrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapimin.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdapistd.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdarith.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdatadst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdatasrc.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h) +jdcoefct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdcolor.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jddctmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jdhuff.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdinput.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmainct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmarker.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmaster.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdmerge.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdpostct.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdsample.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jdtrans.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jerror.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jversion.h,jerror.h) +jfdctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jfdctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctflt.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctfst.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jidctint.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jdct.h) +jquant1.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jquant2.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jutils.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h) +jmemmgr.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) +jmemansi.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,jmemsys.h) diff --git a/src/3rdparty/libjpeg/maktjpeg.st b/src/3rdparty/libjpeg/maktjpeg.st new file mode 100644 index 0000000..43f078a --- /dev/null +++ b/src/3rdparty/libjpeg/maktjpeg.st @@ -0,0 +1,30 @@ +; Project file for Independent JPEG Group's software +; +; This project file is for Atari ST/STE/TT systems using Pure C or Turbo C. +; Thanks to Frank Moehle, B. Setzepfandt, and Guido Vollbeding. +; +; To use this file, rename it to jpegtran.prj. +; If you are using Turbo C, change filenames beginning with "pc..." to "tc..." +; Read installation instructions before trying to make the program! +; +; +; * * * Output file * * * +jpegtran.ttp +; +; * * * COMPILER OPTIONS * * * +.C[-P] ; absolute calls +.C[-M] ; and no string merging, folks +.C[-w-cln] ; no "constant is long" warnings +.C[-w-par] ; no "parameter xxxx unused" +.C[-w-rch] ; no "unreachable code" +.C[-wsig] ; warn if significant digits may be lost += +; * * * * List of modules * * * * +pcstart.o +jpegtran.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h,transupp.h,jversion.h) +cdjpeg.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +rdswitch.c (cdjpeg.h,jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jerror.h,cderror.h) +transupp.c (jinclude.h,jconfig.h,jpeglib.h,jmorecfg.h,jpegint.h,jerror.h,transupp.h) +libjpeg.lib ; built by libjpeg.prj +pcstdlib.lib ; standard library +pcextlib.lib ; extended library diff --git a/src/3rdparty/libjpeg/makvms.opt b/src/3rdparty/libjpeg/makvms.opt new file mode 100644 index 0000000..675e8fe --- /dev/null +++ b/src/3rdparty/libjpeg/makvms.opt @@ -0,0 +1,4 @@ +! A pointer to the VAX/VMS C Run-Time Shareable Library. +! This file is needed by makefile.mms and makefile.vms, +! but only for the older VAX C compiler. DEC C does not need it. +Sys$Library:VAXCRTL.EXE /Share diff --git a/src/3rdparty/libjpeg/rdjpgcom.1 b/src/3rdparty/libjpeg/rdjpgcom.1 new file mode 100644 index 0000000..97611df --- /dev/null +++ b/src/3rdparty/libjpeg/rdjpgcom.1 @@ -0,0 +1,63 @@ +.TH RDJPGCOM 1 "02 April 2009" +.SH NAME +rdjpgcom \- display text comments from a JPEG file +.SH SYNOPSIS +.B rdjpgcom +[ +.B \-raw +] +[ +.B \-verbose +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B rdjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and prints any text comments found in the file on the standard output. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.SH OPTIONS +.TP +.B \-raw +Normally +.B rdjpgcom +escapes non-printable characters in comments, for security reasons. +This option avoids that. +.PP +.B \-verbose +Causes +.B rdjpgcom +to also display the JPEG image dimensions. +.PP +Switch names may be abbreviated, and are not case sensitive. +.SH HINTS +.B rdjpgcom +does not depend on the IJG JPEG library. Its source code is intended as an +illustration of the minimum amount of code required to parse a JPEG file +header correctly. +.PP +In +.B \-verbose +mode, +.B rdjpgcom +will also attempt to print the contents of any "APP12" markers as text. +Some digital cameras produce APP12 markers containing useful textual +information. If you like, you can modify the source code to print +other APPn marker types as well. +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR wrjpgcom (1) +.SH AUTHOR +Independent JPEG Group diff --git a/src/3rdparty/libjpeg/structure.txt b/src/3rdparty/libjpeg/structure.txt new file mode 100644 index 0000000..fe88701 --- /dev/null +++ b/src/3rdparty/libjpeg/structure.txt @@ -0,0 +1,945 @@ +IJG JPEG LIBRARY: SYSTEM ARCHITECTURE + +Copyright (C) 1991-2009, Thomas G. Lane, Guido Vollbeding. +This file is part of the Independent JPEG Group's software. +For conditions of distribution and use, see the accompanying README file. + + +This file provides an overview of the architecture of the IJG JPEG software; +that is, the functions of the various modules in the system and the interfaces +between modules. For more precise details about any data structure or calling +convention, see the include files and comments in the source code. + +We assume that the reader is already somewhat familiar with the JPEG standard. +The README file includes references for learning about JPEG. The file +libjpeg.txt describes the library from the viewpoint of an application +programmer using the library; it's best to read that file before this one. +Also, the file coderules.txt describes the coding style conventions we use. + +In this document, JPEG-specific terminology follows the JPEG standard: + A "component" means a color channel, e.g., Red or Luminance. + A "sample" is a single component value (i.e., one number in the image data). + A "coefficient" is a frequency coefficient (a DCT transform output number). + A "block" is an 8x8 group of samples or coefficients. + An "MCU" (minimum coded unit) is an interleaved set of blocks of size + determined by the sampling factors, or a single block in a + noninterleaved scan. +We do not use the terms "pixel" and "sample" interchangeably. When we say +pixel, we mean an element of the full-size image, while a sample is an element +of the downsampled image. Thus the number of samples may vary across +components while the number of pixels does not. (This terminology is not used +rigorously throughout the code, but it is used in places where confusion would +otherwise result.) + + +*** System features *** + +The IJG distribution contains two parts: + * A subroutine library for JPEG compression and decompression. + * cjpeg/djpeg, two sample applications that use the library to transform + JFIF JPEG files to and from several other image formats. +cjpeg/djpeg are of no great intellectual complexity: they merely add a simple +command-line user interface and I/O routines for several uncompressed image +formats. This document concentrates on the library itself. + +We desire the library to be capable of supporting all JPEG baseline, extended +sequential, and progressive DCT processes. Hierarchical processes are not +supported. + +The library does not support the lossless (spatial) JPEG process. Lossless +JPEG shares little or no code with lossy JPEG, and would normally be used +without the extensive pre- and post-processing provided by this library. +We feel that lossless JPEG is better handled by a separate library. + +Within these limits, any set of compression parameters allowed by the JPEG +spec should be readable for decompression. (We can be more restrictive about +what formats we can generate.) Although the system design allows for all +parameter values, some uncommon settings are not yet implemented and may +never be; nonintegral sampling ratios are the prime example. Furthermore, +we treat 8-bit vs. 12-bit data precision as a compile-time switch, not a +run-time option, because most machines can store 8-bit pixels much more +compactly than 12-bit. + +By itself, the library handles only interchange JPEG datastreams --- in +particular the widely used JFIF file format. The library can be used by +surrounding code to process interchange or abbreviated JPEG datastreams that +are embedded in more complex file formats. (For example, libtiff uses this +library to implement JPEG compression within the TIFF file format.) + +The library includes a substantial amount of code that is not covered by the +JPEG standard but is necessary for typical applications of JPEG. These +functions preprocess the image before JPEG compression or postprocess it after +decompression. They include colorspace conversion, downsampling/upsampling, +and color quantization. This code can be omitted if not needed. + +A wide range of quality vs. speed tradeoffs are possible in JPEG processing, +and even more so in decompression postprocessing. The decompression library +provides multiple implementations that cover most of the useful tradeoffs, +ranging from very-high-quality down to fast-preview operation. On the +compression side we have generally not provided low-quality choices, since +compression is normally less time-critical. It should be understood that the +low-quality modes may not meet the JPEG standard's accuracy requirements; +nonetheless, they are useful for viewers. + + +*** Portability issues *** + +Portability is an essential requirement for the library. The key portability +issues that show up at the level of system architecture are: + +1. Memory usage. We want the code to be able to run on PC-class machines +with limited memory. Images should therefore be processed sequentially (in +strips), to avoid holding the whole image in memory at once. Where a +full-image buffer is necessary, we should be able to use either virtual memory +or temporary files. + +2. Near/far pointer distinction. To run efficiently on 80x86 machines, the +code should distinguish "small" objects (kept in near data space) from +"large" ones (kept in far data space). This is an annoying restriction, but +fortunately it does not impact code quality for less brain-damaged machines, +and the source code clutter turns out to be minimal with sufficient use of +pointer typedefs. + +3. Data precision. We assume that "char" is at least 8 bits, "short" and +"int" at least 16, "long" at least 32. The code will work fine with larger +data sizes, although memory may be used inefficiently in some cases. However, +the JPEG compressed datastream must ultimately appear on external storage as a +sequence of 8-bit bytes if it is to conform to the standard. This may pose a +problem on machines where char is wider than 8 bits. The library represents +compressed data as an array of values of typedef JOCTET. If no data type +exactly 8 bits wide is available, custom data source and data destination +modules must be written to unpack and pack the chosen JOCTET datatype into +8-bit external representation. + + +*** System overview *** + +The compressor and decompressor are each divided into two main sections: +the JPEG compressor or decompressor proper, and the preprocessing or +postprocessing functions. The interface between these two sections is the +image data that the official JPEG spec regards as its input or output: this +data is in the colorspace to be used for compression, and it is downsampled +to the sampling factors to be used. The preprocessing and postprocessing +steps are responsible for converting a normal image representation to or from +this form. (Those few applications that want to deal with YCbCr downsampled +data can skip the preprocessing or postprocessing step.) + +Looking more closely, the compressor library contains the following main +elements: + + Preprocessing: + * Color space conversion (e.g., RGB to YCbCr). + * Edge expansion and downsampling. Optionally, this step can do simple + smoothing --- this is often helpful for low-quality source data. + JPEG proper: + * MCU assembly, DCT, quantization. + * Entropy coding (sequential or progressive, Huffman or arithmetic). + +In addition to these modules we need overall control, marker generation, +and support code (memory management & error handling). There is also a +module responsible for physically writing the output data --- typically +this is just an interface to fwrite(), but some applications may need to +do something else with the data. + +The decompressor library contains the following main elements: + + JPEG proper: + * Entropy decoding (sequential or progressive, Huffman or arithmetic). + * Dequantization, inverse DCT, MCU disassembly. + Postprocessing: + * Upsampling. Optionally, this step may be able to do more general + rescaling of the image. + * Color space conversion (e.g., YCbCr to RGB). This step may also + provide gamma adjustment [ currently it does not ]. + * Optional color quantization (e.g., reduction to 256 colors). + * Optional color precision reduction (e.g., 24-bit to 15-bit color). + [This feature is not currently implemented.] + +We also need overall control, marker parsing, and a data source module. +The support code (memory management & error handling) can be shared with +the compression half of the library. + +There may be several implementations of each of these elements, particularly +in the decompressor, where a wide range of speed/quality tradeoffs is very +useful. It must be understood that some of the best speedups involve +merging adjacent steps in the pipeline. For example, upsampling, color space +conversion, and color quantization might all be done at once when using a +low-quality ordered-dither technique. The system architecture is designed to +allow such merging where appropriate. + + +Note: it is convenient to regard edge expansion (padding to block boundaries) +as a preprocessing/postprocessing function, even though the JPEG spec includes +it in compression/decompression. We do this because downsampling/upsampling +can be simplified a little if they work on padded data: it's not necessary to +have special cases at the right and bottom edges. Therefore the interface +buffer is always an integral number of blocks wide and high, and we expect +compression preprocessing to pad the source data properly. Padding will occur +only to the next block (8-sample) boundary. In an interleaved-scan situation, +additional dummy blocks may be used to fill out MCUs, but the MCU assembly and +disassembly logic will create or discard these blocks internally. (This is +advantageous for speed reasons, since we avoid DCTing the dummy blocks. +It also permits a small reduction in file size, because the compressor can +choose dummy block contents so as to minimize their size in compressed form. +Finally, it makes the interface buffer specification independent of whether +the file is actually interleaved or not.) Applications that wish to deal +directly with the downsampled data must provide similar buffering and padding +for odd-sized images. + + +*** Poor man's object-oriented programming *** + +It should be clear by now that we have a lot of quasi-independent processing +steps, many of which have several possible behaviors. To avoid cluttering the +code with lots of switch statements, we use a simple form of object-style +programming to separate out the different possibilities. + +For example, two different color quantization algorithms could be implemented +as two separate modules that present the same external interface; at runtime, +the calling code will access the proper module indirectly through an "object". + +We can get the limited features we need while staying within portable C. +The basic tool is a function pointer. An "object" is just a struct +containing one or more function pointer fields, each of which corresponds to +a method name in real object-oriented languages. During initialization we +fill in the function pointers with references to whichever module we have +determined we need to use in this run. Then invocation of the module is done +by indirecting through a function pointer; on most machines this is no more +expensive than a switch statement, which would be the only other way of +making the required run-time choice. The really significant benefit, of +course, is keeping the source code clean and well structured. + +We can also arrange to have private storage that varies between different +implementations of the same kind of object. We do this by making all the +module-specific object structs be separately allocated entities, which will +be accessed via pointers in the master compression or decompression struct. +The "public" fields or methods for a given kind of object are specified by +a commonly known struct. But a module's initialization code can allocate +a larger struct that contains the common struct as its first member, plus +additional private fields. With appropriate pointer casting, the module's +internal functions can access these private fields. (For a simple example, +see jdatadst.c, which implements the external interface specified by struct +jpeg_destination_mgr, but adds extra fields.) + +(Of course this would all be a lot easier if we were using C++, but we are +not yet prepared to assume that everyone has a C++ compiler.) + +An important benefit of this scheme is that it is easy to provide multiple +versions of any method, each tuned to a particular case. While a lot of +precalculation might be done to select an optimal implementation of a method, +the cost per invocation is constant. For example, the upsampling step might +have a "generic" method, plus one or more "hardwired" methods for the most +popular sampling factors; the hardwired methods would be faster because they'd +use straight-line code instead of for-loops. The cost to determine which +method to use is paid only once, at startup, and the selection criteria are +hidden from the callers of the method. + +This plan differs a little bit from usual object-oriented structures, in that +only one instance of each object class will exist during execution. The +reason for having the class structure is that on different runs we may create +different instances (choose to execute different modules). You can think of +the term "method" as denoting the common interface presented by a particular +set of interchangeable functions, and "object" as denoting a group of related +methods, or the total shared interface behavior of a group of modules. + + +*** Overall control structure *** + +We previously mentioned the need for overall control logic in the compression +and decompression libraries. In IJG implementations prior to v5, overall +control was mostly provided by "pipeline control" modules, which proved to be +large, unwieldy, and hard to understand. To improve the situation, the +control logic has been subdivided into multiple modules. The control modules +consist of: + +1. Master control for module selection and initialization. This has two +responsibilities: + + 1A. Startup initialization at the beginning of image processing. + The individual processing modules to be used in this run are selected + and given initialization calls. + + 1B. Per-pass control. This determines how many passes will be performed + and calls each active processing module to configure itself + appropriately at the beginning of each pass. End-of-pass processing, + where necessary, is also invoked from the master control module. + + Method selection is partially distributed, in that a particular processing + module may contain several possible implementations of a particular method, + which it will select among when given its initialization call. The master + control code need only be concerned with decisions that affect more than + one module. + +2. Data buffering control. A separate control module exists for each + inter-processing-step data buffer. This module is responsible for + invoking the processing steps that write or read that data buffer. + +Each buffer controller sees the world as follows: + +input data => processing step A => buffer => processing step B => output data + | | | + ------------------ controller ------------------ + +The controller knows the dataflow requirements of steps A and B: how much data +they want to accept in one chunk and how much they output in one chunk. Its +function is to manage its buffer and call A and B at the proper times. + +A data buffer control module may itself be viewed as a processing step by a +higher-level control module; thus the control modules form a binary tree with +elementary processing steps at the leaves of the tree. + +The control modules are objects. A considerable amount of flexibility can +be had by replacing implementations of a control module. For example: +* Merging of adjacent steps in the pipeline is done by replacing a control + module and its pair of processing-step modules with a single processing- + step module. (Hence the possible merges are determined by the tree of + control modules.) +* In some processing modes, a given interstep buffer need only be a "strip" + buffer large enough to accommodate the desired data chunk sizes. In other + modes, a full-image buffer is needed and several passes are required. + The control module determines which kind of buffer is used and manipulates + virtual array buffers as needed. One or both processing steps may be + unaware of the multi-pass behavior. + +In theory, we might be able to make all of the data buffer controllers +interchangeable and provide just one set of implementations for all. In +practice, each one contains considerable special-case processing for its +particular job. The buffer controller concept should be regarded as an +overall system structuring principle, not as a complete description of the +task performed by any one controller. + + +*** Compression object structure *** + +Here is a sketch of the logical structure of the JPEG compression library: + + |-- Colorspace conversion + |-- Preprocessing controller --| + | |-- Downsampling +Main controller --| + | |-- Forward DCT, quantize + |-- Coefficient controller --| + |-- Entropy encoding + +This sketch also describes the flow of control (subroutine calls) during +typical image data processing. Each of the components shown in the diagram is +an "object" which may have several different implementations available. One +or more source code files contain the actual implementation(s) of each object. + +The objects shown above are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the preprocessed input data. This controller invokes preprocessing to + fill the subsampled-data buffer, and JPEG compression to empty it. There is + usually no need for a full-image buffer here; a strip buffer is adequate. + +* Preprocessing controller: buffer controller for the downsampling input data + buffer, which lies between colorspace conversion and downsampling. Note + that a unified conversion/downsampling module would probably replace this + controller entirely. + +* Colorspace conversion: converts application image data into the desired + JPEG color space; also changes the data from pixel-interleaved layout to + separate component planes. Processes one pixel row at a time. + +* Downsampling: performs reduction of chroma components as required. + Optionally may perform pixel-level smoothing as well. Processes a "row + group" at a time, where a row group is defined as Vmax pixel rows of each + component before downsampling, and Vk sample rows afterwards (remember Vk + differs across components). Some downsampling or smoothing algorithms may + require context rows above and below the current row group; the + preprocessing controller is responsible for supplying these rows via proper + buffering. The downsampler is responsible for edge expansion at the right + edge (i.e., extending each sample row to a multiple of 8 samples); but the + preprocessing controller is responsible for vertical edge expansion (i.e., + duplicating the bottom sample row as needed to make a multiple of 8 rows). + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU assembly, including insertion of dummy DCT + blocks when needed at the right or bottom edge. When performing + Huffman-code optimization or emitting a multiscan JPEG file, this + controller is responsible for buffering the full image. The equivalent of + one fully interleaved MCU row of subsampled data is processed per call, + even when the JPEG file is noninterleaved. + +* Forward DCT and quantization: Perform DCT, quantize, and emit coefficients. + Works on one or more DCT blocks at a time. (Note: the coefficients are now + emitted in normal array order, which the entropy encoder is expected to + convert to zigzag order as necessary. Prior versions of the IJG code did + the conversion to zigzag order within the quantization step.) + +* Entropy encoding: Perform Huffman or arithmetic entropy coding and emit the + coded data to the data destination module. Works on one MCU per call. + For progressive JPEG, the same DCT blocks are fed to the entropy coder + during each pass, and the coder must emit the appropriate subset of + coefficients. + +In addition to the above objects, the compression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. + +* Marker writing: generates JPEG markers (except for RSTn, which is emitted + by the entropy encoder when needed). + +* Data destination manager: writes the output JPEG datastream to its final + destination (e.g., a file). The destination manager supplied with the + library knows how to write to a stdio stream; for other behaviors, the + surrounding application may provide its own destination manager. + +* Memory manager: allocates and releases memory, controls virtual arrays + (with backing store management, where required). + +* Error handler: performs formatting and output of error and trace messages; + determines handling of nonfatal errors. The surrounding application may + override some or all of this object's methods to change error handling. + +* Progress monitor: supports output of "percent-done" progress reports. + This object represents an optional callback to the surrounding application: + if wanted, it must be supplied by the application. + +The error handler, destination manager, and progress monitor objects are +defined as separate objects in order to simplify application-specific +customization of the JPEG library. A surrounding application may override +individual methods or supply its own all-new implementation of one of these +objects. The object interfaces for these objects are therefore treated as +part of the application interface of the library, whereas the other objects +are internal to the library. + +The error handler and memory manager are shared by JPEG compression and +decompression; the progress monitor, if used, may be shared as well. + + +*** Decompression object structure *** + +Here is a sketch of the logical structure of the JPEG decompression library: + + |-- Entropy decoding + |-- Coefficient controller --| + | |-- Dequantize, Inverse DCT +Main controller --| + | |-- Upsampling + |-- Postprocessing controller --| |-- Colorspace conversion + |-- Color quantization + |-- Color precision reduction + +As before, this diagram also represents typical control flow. The objects +shown are: + +* Main controller: buffer controller for the subsampled-data buffer, which + holds the output of JPEG decompression proper. This controller's primary + task is to feed the postprocessing procedure. Some upsampling algorithms + may require context rows above and below the current row group; when this + is true, the main controller is responsible for managing its buffer so as + to make context rows available. In the current design, the main buffer is + always a strip buffer; a full-image buffer is never required. + +* Coefficient controller: buffer controller for the DCT-coefficient data. + This controller handles MCU disassembly, including deletion of any dummy + DCT blocks at the right or bottom edge. When reading a multiscan JPEG + file, this controller is responsible for buffering the full image. + (Buffering DCT coefficients, rather than samples, is necessary to support + progressive JPEG.) The equivalent of one fully interleaved MCU row of + subsampled data is processed per call, even when the source JPEG file is + noninterleaved. + +* Entropy decoding: Read coded data from the data source module and perform + Huffman or arithmetic entropy decoding. Works on one MCU per call. + For progressive JPEG decoding, the coefficient controller supplies the prior + coefficients of each MCU (initially all zeroes), which the entropy decoder + modifies in each scan. + +* Dequantization and inverse DCT: like it says. Note that the coefficients + buffered by the coefficient controller have NOT been dequantized; we + merge dequantization and inverse DCT into a single step for speed reasons. + When scaled-down output is asked for, simplified DCT algorithms may be used + that need fewer coefficients and emit fewer samples per DCT block, not the + full 8x8. Works on one DCT block at a time. + +* Postprocessing controller: buffer controller for the color quantization + input buffer, when quantization is in use. (Without quantization, this + controller just calls the upsampler.) For two-pass quantization, this + controller is responsible for buffering the full-image data. + +* Upsampling: restores chroma components to full size. (May support more + general output rescaling, too. Note that if undersized DCT outputs have + been emitted by the DCT module, this module must adjust so that properly + sized outputs are created.) Works on one row group at a time. This module + also calls the color conversion module, so its top level is effectively a + buffer controller for the upsampling->color conversion buffer. However, in + all but the highest-quality operating modes, upsampling and color + conversion are likely to be merged into a single step. + +* Colorspace conversion: convert from JPEG color space to output color space, + and change data layout from separate component planes to pixel-interleaved. + Works on one pixel row at a time. + +* Color quantization: reduce the data to colormapped form, using either an + externally specified colormap or an internally generated one. This module + is not used for full-color output. Works on one pixel row at a time; may + require two passes to generate a color map. Note that the output will + always be a single component representing colormap indexes. In the current + design, the output values are JSAMPLEs, so an 8-bit compilation cannot + quantize to more than 256 colors. This is unlikely to be a problem in + practice. + +* Color reduction: this module handles color precision reduction, e.g., + generating 15-bit color (5 bits/primary) from JPEG's 24-bit output. + Not quite clear yet how this should be handled... should we merge it with + colorspace conversion??? + +Note that some high-speed operating modes might condense the entire +postprocessing sequence to a single module (upsample, color convert, and +quantize in one step). + +In addition to the above objects, the decompression library includes these +objects: + +* Master control: determines the number of passes required, controls overall + and per-pass initialization of the other modules. This is subdivided into + input and output control: jdinput.c controls only input-side processing, + while jdmaster.c handles overall initialization and output-side control. + +* Marker reading: decodes JPEG markers (except for RSTn). + +* Data source manager: supplies the input JPEG datastream. The source + manager supplied with the library knows how to read from a stdio stream; + for other behaviors, the surrounding application may provide its own source + manager. + +* Memory manager: same as for compression library. + +* Error handler: same as for compression library. + +* Progress monitor: same as for compression library. + +As with compression, the data source manager, error handler, and progress +monitor are candidates for replacement by a surrounding application. + + +*** Decompression input and output separation *** + +To support efficient incremental display of progressive JPEG files, the +decompressor is divided into two sections that can run independently: + +1. Data input includes marker parsing, entropy decoding, and input into the + coefficient controller's DCT coefficient buffer. Note that this + processing is relatively cheap and fast. + +2. Data output reads from the DCT coefficient buffer and performs the IDCT + and all postprocessing steps. + +For a progressive JPEG file, the data input processing is allowed to get +arbitrarily far ahead of the data output processing. (This occurs only +if the application calls jpeg_consume_input(); otherwise input and output +run in lockstep, since the input section is called only when the output +section needs more data.) In this way the application can avoid making +extra display passes when data is arriving faster than the display pass +can run. Furthermore, it is possible to abort an output pass without +losing anything, since the coefficient buffer is read-only as far as the +output section is concerned. See libjpeg.txt for more detail. + +A full-image coefficient array is only created if the JPEG file has multiple +scans (or if the application specifies buffered-image mode anyway). When +reading a single-scan file, the coefficient controller normally creates only +a one-MCU buffer, so input and output processing must run in lockstep in this +case. jpeg_consume_input() is effectively a no-op in this situation. + +The main impact of dividing the decompressor in this fashion is that we must +be very careful with shared variables in the cinfo data structure. Each +variable that can change during the course of decompression must be +classified as belonging to data input or data output, and each section must +look only at its own variables. For example, the data output section may not +depend on any of the variables that describe the current scan in the JPEG +file, because these may change as the data input section advances into a new +scan. + +The progress monitor is (somewhat arbitrarily) defined to treat input of the +file as one pass when buffered-image mode is not used, and to ignore data +input work completely when buffered-image mode is used. Note that the +library has no reliable way to predict the number of passes when dealing +with a progressive JPEG file, nor can it predict the number of output passes +in buffered-image mode. So the work estimate is inherently bogus anyway. + +No comparable division is currently made in the compression library, because +there isn't any real need for it. + + +*** Data formats *** + +Arrays of pixel sample values use the following data structure: + + typedef something JSAMPLE; a pixel component value, 0..MAXJSAMPLE + typedef JSAMPLE *JSAMPROW; ptr to a row of samples + typedef JSAMPROW *JSAMPARRAY; ptr to a list of rows + typedef JSAMPARRAY *JSAMPIMAGE; ptr to a list of color-component arrays + +The basic element type JSAMPLE will typically be one of unsigned char, +(signed) char, or short. Short will be used if samples wider than 8 bits are +to be supported (this is a compile-time option). Otherwise, unsigned char is +used if possible. If the compiler only supports signed chars, then it is +necessary to mask off the value when reading. Thus, all reads of JSAMPLE +values must be coded as "GETJSAMPLE(value)", where the macro will be defined +as "((value) & 0xFF)" on signed-char machines and "((int) (value))" elsewhere. + +With these conventions, JSAMPLE values can be assumed to be >= 0. This helps +simplify correct rounding during downsampling, etc. The JPEG standard's +specification that sample values run from -128..127 is accommodated by +subtracting 128 from the sample value in the DCT step. Similarly, during +decompression the output of the IDCT step will be immediately shifted back to +0..255. (NB: different values are required when 12-bit samples are in use. +The code is written in terms of MAXJSAMPLE and CENTERJSAMPLE, which will be +defined as 255 and 128 respectively in an 8-bit implementation, and as 4095 +and 2048 in a 12-bit implementation.) + +We use a pointer per row, rather than a two-dimensional JSAMPLE array. This +choice costs only a small amount of memory and has several benefits: +* Code using the data structure doesn't need to know the allocated width of + the rows. This simplifies edge expansion/compression, since we can work + in an array that's wider than the logical picture width. +* Indexing doesn't require multiplication; this is a performance win on many + machines. +* Arrays with more than 64K total elements can be supported even on machines + where malloc() cannot allocate chunks larger than 64K. +* The rows forming a component array may be allocated at different times + without extra copying. This trick allows some speedups in smoothing steps + that need access to the previous and next rows. + +Note that each color component is stored in a separate array; we don't use the +traditional layout in which the components of a pixel are stored together. +This simplifies coding of modules that work on each component independently, +because they don't need to know how many components there are. Furthermore, +we can read or write each component to a temporary file independently, which +is helpful when dealing with noninterleaved JPEG files. + +In general, a specific sample value is accessed by code such as + GETJSAMPLE(image[colorcomponent][row][col]) +where col is measured from the image left edge, but row is measured from the +first sample row currently in memory. Either of the first two indexings can +be precomputed by copying the relevant pointer. + + +Since most image-processing applications prefer to work on images in which +the components of a pixel are stored together, the data passed to or from the +surrounding application uses the traditional convention: a single pixel is +represented by N consecutive JSAMPLE values, and an image row is an array of +(# of color components)*(image width) JSAMPLEs. One or more rows of data can +be represented by a pointer of type JSAMPARRAY in this scheme. This scheme is +converted to component-wise storage inside the JPEG library. (Applications +that want to skip JPEG preprocessing or postprocessing will have to contend +with component-wise storage.) + + +Arrays of DCT-coefficient values use the following data structure: + + typedef short JCOEF; a 16-bit signed integer + typedef JCOEF JBLOCK[DCTSIZE2]; an 8x8 block of coefficients + typedef JBLOCK *JBLOCKROW; ptr to one horizontal row of 8x8 blocks + typedef JBLOCKROW *JBLOCKARRAY; ptr to a list of such rows + typedef JBLOCKARRAY *JBLOCKIMAGE; ptr to a list of color component arrays + +The underlying type is at least a 16-bit signed integer; while "short" is big +enough on all machines of interest, on some machines it is preferable to use +"int" for speed reasons, despite the storage cost. Coefficients are grouped +into 8x8 blocks (but we always use #defines DCTSIZE and DCTSIZE2 rather than +"8" and "64"). + +The contents of a coefficient block may be in either "natural" or zigzagged +order, and may be true values or divided by the quantization coefficients, +depending on where the block is in the processing pipeline. In the current +library, coefficient blocks are kept in natural order everywhere; the entropy +codecs zigzag or dezigzag the data as it is written or read. The blocks +contain quantized coefficients everywhere outside the DCT/IDCT subsystems. +(This latter decision may need to be revisited to support variable +quantization a la JPEG Part 3.) + +Notice that the allocation unit is now a row of 8x8 blocks, corresponding to +eight rows of samples. Otherwise the structure is much the same as for +samples, and for the same reasons. + +On machines where malloc() can't handle a request bigger than 64Kb, this data +structure limits us to rows of less than 512 JBLOCKs, or a picture width of +4000+ pixels. This seems an acceptable restriction. + + +On 80x86 machines, the bottom-level pointer types (JSAMPROW and JBLOCKROW) +must be declared as "far" pointers, but the upper levels can be "near" +(implying that the pointer lists are allocated in the DS segment). +We use a #define symbol FAR, which expands to the "far" keyword when +compiling on 80x86 machines and to nothing elsewhere. + + +*** Suspendable processing *** + +In some applications it is desirable to use the JPEG library as an +incremental, memory-to-memory filter. In this situation the data source or +destination may be a limited-size buffer, and we can't rely on being able to +empty or refill the buffer at arbitrary times. Instead the application would +like to have control return from the library at buffer overflow/underrun, and +then resume compression or decompression at a later time. + +This scenario is supported for simple cases. (For anything more complex, we +recommend that the application "bite the bullet" and develop real multitasking +capability.) The libjpeg.txt file goes into more detail about the usage and +limitations of this capability; here we address the implications for library +structure. + +The essence of the problem is that the entropy codec (coder or decoder) must +be prepared to stop at arbitrary times. In turn, the controllers that call +the entropy codec must be able to stop before having produced or consumed all +the data that they normally would handle in one call. That part is reasonably +straightforward: we make the controller call interfaces include "progress +counters" which indicate the number of data chunks successfully processed, and +we require callers to test the counter rather than just assume all of the data +was processed. + +Rather than trying to restart at an arbitrary point, the current Huffman +codecs are designed to restart at the beginning of the current MCU after a +suspension due to buffer overflow/underrun. At the start of each call, the +codec's internal state is loaded from permanent storage (in the JPEG object +structures) into local variables. On successful completion of the MCU, the +permanent state is updated. (This copying is not very expensive, and may even +lead to *improved* performance if the local variables can be registerized.) +If a suspension occurs, the codec simply returns without updating the state, +thus effectively reverting to the start of the MCU. Note that this implies +leaving some data unprocessed in the source/destination buffer (ie, the +compressed partial MCU). The data source/destination module interfaces are +specified so as to make this possible. This also implies that the data buffer +must be large enough to hold a worst-case compressed MCU; a couple thousand +bytes should be enough. + +In a successive-approximation AC refinement scan, the progressive Huffman +decoder has to be able to undo assignments of newly nonzero coefficients if it +suspends before the MCU is complete, since decoding requires distinguishing +previously-zero and previously-nonzero coefficients. This is a bit tedious +but probably won't have much effect on performance. Other variants of Huffman +decoding need not worry about this, since they will just store the same values +again if forced to repeat the MCU. + +This approach would probably not work for an arithmetic codec, since its +modifiable state is quite large and couldn't be copied cheaply. Instead it +would have to suspend and resume exactly at the point of the buffer end. + +The JPEG marker reader is designed to cope with suspension at an arbitrary +point. It does so by backing up to the start of the marker parameter segment, +so the data buffer must be big enough to hold the largest marker of interest. +Again, a couple KB should be adequate. (A special "skip" convention is used +to bypass COM and APPn markers, so these can be larger than the buffer size +without causing problems; otherwise a 64K buffer would be needed in the worst +case.) + +The JPEG marker writer currently does *not* cope with suspension. +We feel that this is not necessary; it is much easier simply to require +the application to ensure there is enough buffer space before starting. (An +empty 2K buffer is more than sufficient for the header markers; and ensuring +there are a dozen or two bytes available before calling jpeg_finish_compress() +will suffice for the trailer.) This would not work for writing multi-scan +JPEG files, but we simply do not intend to support that capability with +suspension. + + +*** Memory manager services *** + +The JPEG library's memory manager controls allocation and deallocation of +memory, and it manages large "virtual" data arrays on machines where the +operating system does not provide virtual memory. Note that the same +memory manager serves both compression and decompression operations. + +In all cases, allocated objects are tied to a particular compression or +decompression master record, and they will be released when that master +record is destroyed. + +The memory manager does not provide explicit deallocation of objects. +Instead, objects are created in "pools" of free storage, and a whole pool +can be freed at once. This approach helps prevent storage-leak bugs, and +it speeds up operations whenever malloc/free are slow (as they often are). +The pools can be regarded as lifetime identifiers for objects. Two +pools/lifetimes are defined: + * JPOOL_PERMANENT lasts until master record is destroyed + * JPOOL_IMAGE lasts until done with image (JPEG datastream) +Permanent lifetime is used for parameters and tables that should be carried +across from one datastream to another; this includes all application-visible +parameters. Image lifetime is used for everything else. (A third lifetime, +JPOOL_PASS = one processing pass, was originally planned. However it was +dropped as not being worthwhile. The actual usage patterns are such that the +peak memory usage would be about the same anyway; and having per-pass storage +substantially complicates the virtual memory allocation rules --- see below.) + +The memory manager deals with three kinds of object: +1. "Small" objects. Typically these require no more than 10K-20K total. +2. "Large" objects. These may require tens to hundreds of K depending on + image size. Semantically they behave the same as small objects, but we + distinguish them for two reasons: + * On MS-DOS machines, large objects are referenced by FAR pointers, + small objects by NEAR pointers. + * Pool allocation heuristics may differ for large and small objects. + Note that individual "large" objects cannot exceed the size allowed by + type size_t, which may be 64K or less on some machines. +3. "Virtual" objects. These are large 2-D arrays of JSAMPLEs or JBLOCKs + (typically large enough for the entire image being processed). The + memory manager provides stripwise access to these arrays. On machines + without virtual memory, the rest of the array may be swapped out to a + temporary file. + +(Note: JSAMPARRAY and JBLOCKARRAY data structures are a combination of large +objects for the data proper and small objects for the row pointers. For +convenience and speed, the memory manager provides single routines to create +these structures. Similarly, virtual arrays include a small control block +and a JSAMPARRAY or JBLOCKARRAY working buffer, all created with one call.) + +In the present implementation, virtual arrays are only permitted to have image +lifespan. (Permanent lifespan would not be reasonable, and pass lifespan is +not very useful since a virtual array's raison d'etre is to store data for +multiple passes through the image.) We also expect that only "small" objects +will be given permanent lifespan, though this restriction is not required by +the memory manager. + +In a non-virtual-memory machine, some performance benefit can be gained by +making the in-memory buffers for virtual arrays be as large as possible. +(For small images, the buffers might fit entirely in memory, so blind +swapping would be very wasteful.) The memory manager will adjust the height +of the buffers to fit within a prespecified maximum memory usage. In order +to do this in a reasonably optimal fashion, the manager needs to allocate all +of the virtual arrays at once. Therefore, there isn't a one-step allocation +routine for virtual arrays; instead, there is a "request" routine that simply +allocates the control block, and a "realize" routine (called just once) that +determines space allocation and creates all of the actual buffers. The +realize routine must allow for space occupied by non-virtual large objects. +(We don't bother to factor in the space needed for small objects, on the +grounds that it isn't worth the trouble.) + +To support all this, we establish the following protocol for doing business +with the memory manager: + 1. Modules must request virtual arrays (which may have only image lifespan) + during the initial setup phase, i.e., in their jinit_xxx routines. + 2. All "large" objects (including JSAMPARRAYs and JBLOCKARRAYs) must also be + allocated during initial setup. + 3. realize_virt_arrays will be called at the completion of initial setup. + The above conventions ensure that sufficient information is available + for it to choose a good size for virtual array buffers. +Small objects of any lifespan may be allocated at any time. We expect that +the total space used for small objects will be small enough to be negligible +in the realize_virt_arrays computation. + +In a virtual-memory machine, we simply pretend that the available space is +infinite, thus causing realize_virt_arrays to decide that it can allocate all +the virtual arrays as full-size in-memory buffers. The overhead of the +virtual-array access protocol is very small when no swapping occurs. + +A virtual array can be specified to be "pre-zeroed"; when this flag is set, +never-yet-written sections of the array are set to zero before being made +available to the caller. If this flag is not set, never-written sections +of the array contain garbage. (This feature exists primarily because the +equivalent logic would otherwise be needed in jdcoefct.c for progressive +JPEG mode; we may as well make it available for possible other uses.) + +The first write pass on a virtual array is required to occur in top-to-bottom +order; read passes, as well as any write passes after the first one, may +access the array in any order. This restriction exists partly to simplify +the virtual array control logic, and partly because some file systems may not +support seeking beyond the current end-of-file in a temporary file. The main +implication of this restriction is that rearrangement of rows (such as +converting top-to-bottom data order to bottom-to-top) must be handled while +reading data out of the virtual array, not while putting it in. + + +*** Memory manager internal structure *** + +To isolate system dependencies as much as possible, we have broken the +memory manager into two parts. There is a reasonably system-independent +"front end" (jmemmgr.c) and a "back end" that contains only the code +likely to change across systems. All of the memory management methods +outlined above are implemented by the front end. The back end provides +the following routines for use by the front end (none of these routines +are known to the rest of the JPEG code): + +jpeg_mem_init, jpeg_mem_term system-dependent initialization/shutdown + +jpeg_get_small, jpeg_free_small interface to malloc and free library routines + (or their equivalents) + +jpeg_get_large, jpeg_free_large interface to FAR malloc/free in MSDOS machines; + else usually the same as + jpeg_get_small/jpeg_free_small + +jpeg_mem_available estimate available memory + +jpeg_open_backing_store create a backing-store object + +read_backing_store, manipulate a backing-store object +write_backing_store, +close_backing_store + +On some systems there will be more than one type of backing-store object +(specifically, in MS-DOS a backing store file might be an area of extended +memory as well as a disk file). jpeg_open_backing_store is responsible for +choosing how to implement a given object. The read/write/close routines +are method pointers in the structure that describes a given object; this +lets them be different for different object types. + +It may be necessary to ensure that backing store objects are explicitly +released upon abnormal program termination. For example, MS-DOS won't free +extended memory by itself. To support this, we will expect the main program +or surrounding application to arrange to call self_destruct (typically via +jpeg_destroy) upon abnormal termination. This may require a SIGINT signal +handler or equivalent. We don't want to have the back end module install its +own signal handler, because that would pre-empt the surrounding application's +ability to control signal handling. + +The IJG distribution includes several memory manager back end implementations. +Usually the same back end should be suitable for all applications on a given +system, but it is possible for an application to supply its own back end at +need. + + +*** Implications of DNL marker *** + +Some JPEG files may use a DNL marker to postpone definition of the image +height (this would be useful for a fax-like scanner's output, for instance). +In these files the SOF marker claims the image height is 0, and you only +find out the true image height at the end of the first scan. + +We could read these files as follows: +1. Upon seeing zero image height, replace it by 65535 (the maximum allowed). +2. When the DNL is found, update the image height in the global image + descriptor. +This implies that control modules must avoid making copies of the image +height, and must re-test for termination after each MCU row. This would +be easy enough to do. + +In cases where image-size data structures are allocated, this approach will +result in very inefficient use of virtual memory or much-larger-than-necessary +temporary files. This seems acceptable for something that probably won't be a +mainstream usage. People might have to forgo use of memory-hogging options +(such as two-pass color quantization or noninterleaved JPEG files) if they +want efficient conversion of such files. (One could improve efficiency by +demanding a user-supplied upper bound for the height, less than 65536; in most +cases it could be much less.) + +The standard also permits the SOF marker to overestimate the image height, +with a DNL to give the true, smaller height at the end of the first scan. +This would solve the space problems if the overestimate wasn't too great. +However, it implies that you don't even know whether DNL will be used. + +This leads to a couple of very serious objections: +1. Testing for a DNL marker must occur in the inner loop of the decompressor's + Huffman decoder; this implies a speed penalty whether the feature is used + or not. +2. There is no way to hide the last-minute change in image height from an + application using the decoder. Thus *every* application using the IJG + library would suffer a complexity penalty whether it cared about DNL or + not. +We currently do not support DNL because of these problems. + +A different approach is to insist that DNL-using files be preprocessed by a +separate program that reads ahead to the DNL, then goes back and fixes the SOF +marker. This is a much simpler solution and is probably far more efficient. +Even if one wants piped input, buffering the first scan of the JPEG file needs +a lot smaller temp file than is implied by the maximum-height method. For +this approach we'd simply treat DNL as a no-op in the decompressor (at most, +check that it matches the SOF image height). + +We will not worry about making the compressor capable of outputting DNL. +Something similar to the first scheme above could be applied if anyone ever +wants to make that work. diff --git a/src/3rdparty/libjpeg/transupp.h b/src/3rdparty/libjpeg/transupp.h new file mode 100644 index 0000000..7c16c19 --- /dev/null +++ b/src/3rdparty/libjpeg/transupp.h @@ -0,0 +1,210 @@ +/* + * transupp.h + * + * Copyright (C) 1997-2009, Thomas G. Lane, Guido Vollbeding. + * This file is part of the Independent JPEG Group's software. + * For conditions of distribution and use, see the accompanying README file. + * + * This file contains declarations for image transformation routines and + * other utility code used by the jpegtran sample application. These are + * NOT part of the core JPEG library. But we keep these routines separate + * from jpegtran.c to ease the task of maintaining jpegtran-like programs + * that have other user interfaces. + * + * NOTE: all the routines declared here have very specific requirements + * about when they are to be executed during the reading and writing of the + * source and destination files. See the comments in transupp.c, or see + * jpegtran.c for an example of correct usage. + */ + +/* If you happen not to want the image transform support, disable it here */ +#ifndef TRANSFORMS_SUPPORTED +#define TRANSFORMS_SUPPORTED 1 /* 0 disables transform code */ +#endif + +/* + * Although rotating and flipping data expressed as DCT coefficients is not + * hard, there is an asymmetry in the JPEG format specification for images + * whose dimensions aren't multiples of the iMCU size. The right and bottom + * image edges are padded out to the next iMCU boundary with junk data; but + * no padding is possible at the top and left edges. If we were to flip + * the whole image including the pad data, then pad garbage would become + * visible at the top and/or left, and real pixels would disappear into the + * pad margins --- perhaps permanently, since encoders & decoders may not + * bother to preserve DCT blocks that appear to be completely outside the + * nominal image area. So, we have to exclude any partial iMCUs from the + * basic transformation. + * + * Transpose is the only transformation that can handle partial iMCUs at the + * right and bottom edges completely cleanly. flip_h can flip partial iMCUs + * at the bottom, but leaves any partial iMCUs at the right edge untouched. + * Similarly flip_v leaves any partial iMCUs at the bottom edge untouched. + * The other transforms are defined as combinations of these basic transforms + * and process edge blocks in a way that preserves the equivalence. + * + * The "trim" option causes untransformable partial iMCUs to be dropped; + * this is not strictly lossless, but it usually gives the best-looking + * result for odd-size images. Note that when this option is active, + * the expected mathematical equivalences between the transforms may not hold. + * (For example, -rot 270 -trim trims only the bottom edge, but -rot 90 -trim + * followed by -rot 180 -trim trims both edges.) + * + * We also offer a lossless-crop option, which discards data outside a given + * image region but losslessly preserves what is inside. Like the rotate and + * flip transforms, lossless crop is restricted by the JPEG format: the upper + * left corner of the selected region must fall on an iMCU boundary. If this + * does not hold for the given crop parameters, we silently move the upper left + * corner up and/or left to make it so, simultaneously increasing the region + * dimensions to keep the lower right crop corner unchanged. (Thus, the + * output image covers at least the requested region, but may cover more.) + * + * We also provide a lossless-resize option, which is kind of a lossless-crop + * operation in the DCT coefficient block domain - it discards higher-order + * coefficients and losslessly preserves lower-order coefficients of a + * sub-block. + * + * Rotate/flip transform, resize, and crop can be requested together in a + * single invocation. The crop is applied last --- that is, the crop region + * is specified in terms of the destination image after transform/resize. + * + * We also offer a "force to grayscale" option, which simply discards the + * chrominance channels of a YCbCr image. This is lossless in the sense that + * the luminance channel is preserved exactly. It's not the same kind of + * thing as the rotate/flip transformations, but it's convenient to handle it + * as part of this package, mainly because the transformation routines have to + * be aware of the option to know how many components to work on. + */ + + +/* Short forms of external names for systems with brain-damaged linkers. */ + +#ifdef NEED_SHORT_EXTERNAL_NAMES +#define jtransform_parse_crop_spec jTrParCrop +#define jtransform_request_workspace jTrRequest +#define jtransform_adjust_parameters jTrAdjust +#define jtransform_execute_transform jTrExec +#define jtransform_perfect_transform jTrPerfect +#define jcopy_markers_setup jCMrkSetup +#define jcopy_markers_execute jCMrkExec +#endif /* NEED_SHORT_EXTERNAL_NAMES */ + + +/* + * Codes for supported types of image transformations. + */ + +typedef enum { + JXFORM_NONE, /* no transformation */ + JXFORM_FLIP_H, /* horizontal flip */ + JXFORM_FLIP_V, /* vertical flip */ + JXFORM_TRANSPOSE, /* transpose across UL-to-LR axis */ + JXFORM_TRANSVERSE, /* transpose across UR-to-LL axis */ + JXFORM_ROT_90, /* 90-degree clockwise rotation */ + JXFORM_ROT_180, /* 180-degree rotation */ + JXFORM_ROT_270 /* 270-degree clockwise (or 90 ccw) */ +} JXFORM_CODE; + +/* + * Codes for crop parameters, which can individually be unspecified, + * positive, or negative. (Negative width or height makes no sense, though.) + */ + +typedef enum { + JCROP_UNSET, + JCROP_POS, + JCROP_NEG +} JCROP_CODE; + +/* + * Transform parameters struct. + * NB: application must not change any elements of this struct after + * calling jtransform_request_workspace. + */ + +typedef struct { + /* Options: set by caller */ + JXFORM_CODE transform; /* image transform operator */ + boolean perfect; /* if TRUE, fail if partial MCUs are requested */ + boolean trim; /* if TRUE, trim partial MCUs as needed */ + boolean force_grayscale; /* if TRUE, convert color image to grayscale */ + boolean crop; /* if TRUE, crop source image */ + + /* Crop parameters: application need not set these unless crop is TRUE. + * These can be filled in by jtransform_parse_crop_spec(). + */ + JDIMENSION crop_width; /* Width of selected region */ + JCROP_CODE crop_width_set; + JDIMENSION crop_height; /* Height of selected region */ + JCROP_CODE crop_height_set; + JDIMENSION crop_xoffset; /* X offset of selected region */ + JCROP_CODE crop_xoffset_set; /* (negative measures from right edge) */ + JDIMENSION crop_yoffset; /* Y offset of selected region */ + JCROP_CODE crop_yoffset_set; /* (negative measures from bottom edge) */ + + /* Internal workspace: caller should not touch these */ + int num_components; /* # of components in workspace */ + jvirt_barray_ptr * workspace_coef_arrays; /* workspace for transformations */ + JDIMENSION output_width; /* cropped destination dimensions */ + JDIMENSION output_height; + JDIMENSION x_crop_offset; /* destination crop offsets measured in iMCUs */ + JDIMENSION y_crop_offset; + int iMCU_sample_width; /* destination iMCU size */ + int iMCU_sample_height; +} jpeg_transform_info; + + +#if TRANSFORMS_SUPPORTED + +/* Parse a crop specification (written in X11 geometry style) */ +EXTERN(boolean) jtransform_parse_crop_spec + JPP((jpeg_transform_info *info, const char *spec)); +/* Request any required workspace */ +EXTERN(boolean) jtransform_request_workspace + JPP((j_decompress_ptr srcinfo, jpeg_transform_info *info)); +/* Adjust output image parameters */ +EXTERN(jvirt_barray_ptr *) jtransform_adjust_parameters + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Execute the actual transformation, if any */ +EXTERN(void) jtransform_execute_transform + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + jvirt_barray_ptr *src_coef_arrays, + jpeg_transform_info *info)); +/* Determine whether lossless transformation is perfectly + * possible for a specified image and transformation. + */ +EXTERN(boolean) jtransform_perfect_transform + JPP((JDIMENSION image_width, JDIMENSION image_height, + int MCU_width, int MCU_height, + JXFORM_CODE transform)); + +/* jtransform_execute_transform used to be called + * jtransform_execute_transformation, but some compilers complain about + * routine names that long. This macro is here to avoid breaking any + * old source code that uses the original name... + */ +#define jtransform_execute_transformation jtransform_execute_transform + +#endif /* TRANSFORMS_SUPPORTED */ + + +/* + * Support for copying optional markers from source to destination file. + */ + +typedef enum { + JCOPYOPT_NONE, /* copy no optional markers */ + JCOPYOPT_COMMENTS, /* copy only comment (COM) markers */ + JCOPYOPT_ALL /* copy all optional markers */ +} JCOPY_OPTION; + +#define JCOPYOPT_DEFAULT JCOPYOPT_COMMENTS /* recommended default */ + +/* Setup decompression object to save desired markers in memory */ +EXTERN(void) jcopy_markers_setup + JPP((j_decompress_ptr srcinfo, JCOPY_OPTION option)); +/* Copy markers saved in the given source object to the destination object */ +EXTERN(void) jcopy_markers_execute + JPP((j_decompress_ptr srcinfo, j_compress_ptr dstinfo, + JCOPY_OPTION option)); diff --git a/src/3rdparty/libjpeg/usage.txt b/src/3rdparty/libjpeg/usage.txt new file mode 100644 index 0000000..6e8546a --- /dev/null +++ b/src/3rdparty/libjpeg/usage.txt @@ -0,0 +1,617 @@ +USAGE instructions for the Independent JPEG Group's JPEG software +================================================================= + +This file describes usage of the JPEG conversion programs cjpeg and djpeg, +as well as the utility programs jpegtran, rdjpgcom and wrjpgcom. (See +the other documentation files if you wish to use the JPEG library within +your own programs.) + +If you are on a Unix machine you may prefer to read the Unix-style manual +pages in files cjpeg.1, djpeg.1, jpegtran.1, rdjpgcom.1, wrjpgcom.1. + + +INTRODUCTION + +These programs implement JPEG image encoding, decoding, and transcoding. +JPEG (pronounced "jay-peg") is a standardized compression method for +full-color and gray-scale images. + + +GENERAL USAGE + +We provide two programs, cjpeg to compress an image file into JPEG format, +and djpeg to decompress a JPEG file back into a conventional image format. + +On Unix-like systems, you say: + cjpeg [switches] [imagefile] >jpegfile +or + djpeg [switches] [jpegfile] >imagefile +The programs read the specified input file, or standard input if none is +named. They always write to standard output (with trace/error messages to +standard error). These conventions are handy for piping images between +programs. + +On most non-Unix systems, you say: + cjpeg [switches] imagefile jpegfile +or + djpeg [switches] jpegfile imagefile +i.e., both the input and output files are named on the command line. This +style is a little more foolproof, and it loses no functionality if you don't +have pipes. (You can get this style on Unix too, if you prefer, by defining +TWO_FILE_COMMANDLINE when you compile the programs; see install.txt.) + +You can also say: + cjpeg [switches] -outfile jpegfile imagefile +or + djpeg [switches] -outfile imagefile jpegfile +This syntax works on all systems, so it is useful for scripts. + +The currently supported image file formats are: PPM (PBMPLUS color format), +PGM (PBMPLUS gray-scale format), BMP, Targa, and RLE (Utah Raster Toolkit +format). (RLE is supported only if the URT library is available.) +cjpeg recognizes the input image format automatically, with the exception +of some Targa-format files. You have to tell djpeg which format to generate. + +JPEG files are in the defacto standard JFIF file format. There are other, +less widely used JPEG-based file formats, but we don't support them. + +All switch names may be abbreviated; for example, -grayscale may be written +-gray or -gr. Most of the "basic" switches can be abbreviated to as little as +one letter. Upper and lower case are equivalent (-BMP is the same as -bmp). +British spellings are also accepted (e.g., -greyscale), though for brevity +these are not mentioned below. + + +CJPEG DETAILS + +The basic command line switches for cjpeg are: + + -quality N[,...] Scale quantization tables to adjust image quality. + Quality is 0 (worst) to 100 (best); default is 75. + (See below for more info.) + + -grayscale Create monochrome JPEG file from color input. + Be sure to use this switch when compressing a grayscale + BMP file, because cjpeg isn't bright enough to notice + whether a BMP file uses only shades of gray. By + saying -grayscale, you'll get a smaller JPEG file that + takes less time to process. + + -optimize Perform optimization of entropy encoding parameters. + Without this, default encoding parameters are used. + -optimize usually makes the JPEG file a little smaller, + but cjpeg runs somewhat slower and needs much more + memory. Image quality and speed of decompression are + unaffected by -optimize. + + -progressive Create progressive JPEG file (see below). + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are 8/N with all N from 1 to + 16. + + -targa Input file is Targa format. Targa files that contain + an "identification" field will not be automatically + recognized by cjpeg; for such files you must specify + -targa to make cjpeg treat the input as Targa format. + For most Targa files, you won't need this switch. + +The -quality switch lets you trade off compressed file size against quality of +the reconstructed image: the higher the quality setting, the larger the JPEG +file, and the closer the output image will be to the original input. Normally +you want to use the lowest quality setting (smallest file) that decompresses +into something visually indistinguishable from the original image. For this +purpose the quality setting should be between 50 and 95; the default of 75 is +often about right. If you see defects at -quality 75, then go up 5 or 10 +counts at a time until you are happy with the output image. (The optimal +setting will vary from one image to another.) + +-quality 100 will generate a quantization table of all 1's, minimizing loss +in the quantization step (but there is still information loss in subsampling, +as well as roundoff error). This setting is mainly of interest for +experimental purposes. Quality values above about 95 are NOT recommended for +normal use; the compressed file size goes up dramatically for hardly any gain +in output image quality. + +In the other direction, quality values below 50 will produce very small files +of low image quality. Settings around 5 to 10 might be useful in preparing an +index of a large image library, for example. Try -quality 2 (or so) for some +amusing Cubist effects. (Note: quality values below about 25 generate 2-byte +quantization tables, which are considered optional in the JPEG standard. +cjpeg emits a warning message when you give such a quality value, because some +other JPEG programs may be unable to decode the resulting file. Use -baseline +if you need to ensure compatibility at low quality values.) + +The -quality option has been extended in IJG version 7 for support of separate +quality settings for luminance and chrominance (or in general, for every +provided quantization table slot). This feature is useful for high-quality +applications which cannot accept the damage of color data by coarse +subsampling settings. You can now easily reduce the color data amount more +smoothly with finer control without separate subsampling. The resulting file +is fully compliant with standard JPEG decoders. +Note that the -quality ratings refer to the quantization table slots, and that +the last value is replicated if there are more q-table slots than parameters. +The default q-table slots are 0 for luminance and 1 for chrominance with +default tables as given in the JPEG standard. This is compatible with the old +behaviour in case that only one parameter is given, which is then used for +both luminance and chrominance (slots 0 and 1). More or custom quantization +tables can be set with -qtables and assigned to components with -qslots +parameter (see the "wizard" switches below). +CAUTION: You must explicitly add -sample 1x1 for efficient separate color +quality selection, since the default value used by library is 2x2! + +The -progressive switch creates a "progressive JPEG" file. In this type of +JPEG file, the data is stored in multiple scans of increasing quality. If the +file is being transmitted over a slow communications link, the decoder can use +the first scan to display a low-quality image very quickly, and can then +improve the display with each subsequent scan. The final image is exactly +equivalent to a standard JPEG file of the same quality setting, and the total +file size is about the same --- often a little smaller. + +Switches for advanced users: + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -nosmooth Don't use high-quality downsampling. + + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -restart 0 (the default) means no restart markers. + + -smooth N Smooth the input image to eliminate dithering noise. + N, ranging from 1 to 100, indicates the strength of + smoothing. 0 (the default) means no smoothing. + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + +The -restart option inserts extra markers that allow a JPEG decoder to +resynchronize after a transmission error. Without restart markers, any damage +to a compressed file will usually ruin the image from the point of the error +to the end of the image; with restart markers, the damage is usually confined +to the portion of the image up to the next restart marker. Of course, the +restart markers occupy extra space. We recommend -restart 1 for images that +will be transmitted across unreliable networks such as Usenet. + +The -smooth option filters the input to eliminate fine-scale noise. This is +often useful when converting dithered images to JPEG: a moderate smoothing +factor of 10 to 50 gets rid of dithering patterns in the input file, resulting +in a smaller JPEG file and a better-looking image. Too large a smoothing +factor will visibly blur the image, however. + +Switches for wizards: + + -arithmetic Use arithmetic coding. CAUTION: arithmetic coded JPEG + is not yet widely implemented, so many decoders will + be unable to view an arithmetic coded JPEG file at + all. + + -baseline Force baseline-compatible quantization tables to be + generated. This clamps quantization values to 8 bits + even at low quality settings. (This switch is poorly + named, since it does not ensure that the output is + actually baseline JPEG. For example, you can use + -baseline and -progressive together.) + + -qtables file Use the quantization tables given in the specified + text file. + + -qslots N[,...] Select which quantization table to use for each color + component. + + -sample HxV[,...] Set JPEG sampling factors for each color component. + + -scans file Use the scan script given in the specified text file. + +The "wizard" switches are intended for experimentation with JPEG. If you +don't know what you are doing, DON'T USE THEM. These switches are documented +further in the file wizard.txt. + + +DJPEG DETAILS + +The basic command line switches for djpeg are: + + -colors N Reduce image to at most N colors. This reduces the + or -quantize N number of colors used in the output image, so that it + can be displayed on a colormapped display or stored in + a colormapped file format. For example, if you have + an 8-bit display, you'd need to reduce to 256 or fewer + colors. (-colors is the recommended name, -quantize + is provided only for backwards compatibility.) + + -fast Select recommended processing options for fast, low + quality output. (The default options are chosen for + highest quality output.) Currently, this is equivalent + to "-dct fast -nosmooth -onepass -dither ordered". + + -grayscale Force gray-scale output even if JPEG file is color. + Useful for viewing on monochrome displays; also, + djpeg runs noticeably faster in this mode. + + -scale M/N Scale the output image by a factor M/N. Currently + supported scale factors are M/N with all M from 1 to + 16, where N is the source DCT size, which is 8 for + baseline JPEG. If the /N part is omitted, then M + specifies the DCT scaled size to be applied on the + given input. For baseline JPEG this is equivalent to + M/8 scaling, since the source DCT size for baseline + JPEG is 8. Scaling is handy if the image is larger + than your screen; also, djpeg runs much faster when + scaling down the output. + + -bmp Select BMP output format (Windows flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is gray-scale; + otherwise, 24-bit full-color format is emitted. + + -gif Select GIF output format. Since GIF does not support + more than 256 colors, -colors 256 is assumed (unless + you specify a smaller number of colors). If you + specify -fast, the default number of colors is 216. + + -os2 Select BMP output format (OS/2 1.x flavor). 8-bit + colormapped format is emitted if -colors or -grayscale + is specified, or if the JPEG file is gray-scale; + otherwise, 24-bit full-color format is emitted. + + -pnm Select PBMPLUS (PPM/PGM) output format (this is the + default format). PGM is emitted if the JPEG file is + gray-scale or if -grayscale is specified; otherwise + PPM is emitted. + + -rle Select RLE output format. (Requires URT library.) + + -targa Select Targa output format. Gray-scale format is + emitted if the JPEG file is gray-scale or if + -grayscale is specified; otherwise, colormapped format + is emitted if -colors is specified; otherwise, 24-bit + full-color format is emitted. + +Switches for advanced users: + + -dct int Use integer DCT method (default). + -dct fast Use fast integer DCT (less accurate). + -dct float Use floating-point DCT method. + The float method is very slightly more accurate than + the int method, but is much slower unless your machine + has very fast floating-point hardware. Also note that + results of the floating-point method may vary slightly + across machines, while the integer methods should give + the same results everywhere. The fast integer method + is much less accurate than the other two. + + -dither fs Use Floyd-Steinberg dithering in color quantization. + -dither ordered Use ordered dithering in color quantization. + -dither none Do not use dithering in color quantization. + By default, Floyd-Steinberg dithering is applied when + quantizing colors; this is slow but usually produces + the best results. Ordered dither is a compromise + between speed and quality; no dithering is fast but + usually looks awful. Note that these switches have + no effect unless color quantization is being done. + Ordered dither is only available in -onepass mode. + + -map FILE Quantize to the colors used in the specified image + file. This is useful for producing multiple files + with identical color maps, or for forcing a predefined + set of colors to be used. The FILE must be a GIF + or PPM file. This option overrides -colors and + -onepass. + + -nosmooth Don't use high-quality upsampling. + + -onepass Use one-pass instead of two-pass color quantization. + The one-pass method is faster and needs less memory, + but it produces a lower-quality image. -onepass is + ignored unless you also say -colors N. Also, + the one-pass method is always used for gray-scale + output (the two-pass method is no improvement then). + + -maxmemory N Set limit for amount of memory to use in processing + large images. Value is in thousands of bytes, or + millions of bytes if "M" is attached to the number. + For example, -max 4m selects 4000000 bytes. If more + space is needed, temporary files will be used. + + -verbose Enable debug printout. More -v's give more printout. + or -debug Also, version information is printed at startup. + + +HINTS FOR CJPEG + +Color GIF files are not the ideal input for JPEG; JPEG is really intended for +compressing full-color (24-bit) images. In particular, don't try to convert +cartoons, line drawings, and other images that have only a few distinct +colors. GIF works great on these, JPEG does not. If you want to convert a +GIF to JPEG, you should experiment with cjpeg's -quality and -smooth options +to get a satisfactory conversion. -smooth 10 or so is often helpful. + +Avoid running an image through a series of JPEG compression/decompression +cycles. Image quality loss will accumulate; after ten or so cycles the image +may be noticeably worse than it was after one cycle. It's best to use a +lossless format while manipulating an image, then convert to JPEG format when +you are ready to file the image away. + +The -optimize option to cjpeg is worth using when you are making a "final" +version for posting or archiving. It's also a win when you are using low +quality settings to make very small JPEG files; the percentage improvement +is often a lot more than it is on larger files. (At present, -optimize +mode is always selected when generating progressive JPEG files.) + +GIF input files are no longer supported, to avoid the Unisys LZW patent. +(Conversion of GIF files to JPEG is usually a bad idea anyway.) + + +HINTS FOR DJPEG + +To get a quick preview of an image, use the -grayscale and/or -scale switches. +"-grayscale -scale 1/8" is the fastest case. + +Several options are available that trade off image quality to gain speed. +"-fast" turns on the recommended settings. + +"-dct fast" and/or "-nosmooth" gain speed at a small sacrifice in quality. +When producing a color-quantized image, "-onepass -dither ordered" is fast but +much lower quality than the default behavior. "-dither none" may give +acceptable results in two-pass mode, but is seldom tolerable in one-pass mode. + +If you are fortunate enough to have very fast floating point hardware, +"-dct float" may be even faster than "-dct fast". But on most machines +"-dct float" is slower than "-dct int"; in this case it is not worth using, +because its theoretical accuracy advantage is too small to be significant +in practice. + +Two-pass color quantization requires a good deal of memory; on MS-DOS machines +it may run out of memory even with -maxmemory 0. In that case you can still +decompress, with some loss of image quality, by specifying -onepass for +one-pass quantization. + +To avoid the Unisys LZW patent, djpeg produces uncompressed GIF files. These +are larger than they should be, but are readable by standard GIF decoders. + + +HINTS FOR BOTH PROGRAMS + +If more space is needed than will fit in the available main memory (as +determined by -maxmemory), temporary files will be used. (MS-DOS versions +will try to get extended or expanded memory first.) The temporary files are +often rather large: in typical cases they occupy three bytes per pixel, for +example 3*800*600 = 1.44Mb for an 800x600 image. If you don't have enough +free disk space, leave out -progressive and -optimize (for cjpeg) or specify +-onepass (for djpeg). + +On MS-DOS, the temporary files are created in the directory named by the TMP +or TEMP environment variable, or in the current directory if neither of those +exist. Amiga implementations put the temp files in the directory named by +JPEGTMP:, so be sure to assign JPEGTMP: to a disk partition with adequate free +space. + +The default memory usage limit (-maxmemory) is set when the software is +compiled. If you get an "insufficient memory" error, try specifying a smaller +-maxmemory value, even -maxmemory 0 to use the absolute minimum space. You +may want to recompile with a smaller default value if this happens often. + +On machines that have "environment" variables, you can define the environment +variable JPEGMEM to set the default memory limit. The value is specified as +described for the -maxmemory switch. JPEGMEM overrides the default value +specified when the program was compiled, and itself is overridden by an +explicit -maxmemory switch. + +On MS-DOS machines, -maxmemory is the amount of main (conventional) memory to +use. (Extended or expanded memory is also used if available.) Most +DOS-specific versions of this software do their own memory space estimation +and do not need you to specify -maxmemory. + + +JPEGTRAN + +jpegtran performs various useful transformations of JPEG files. +It can translate the coded representation from one variant of JPEG to another, +for example from baseline JPEG to progressive JPEG or vice versa. It can also +perform some rearrangements of the image data, for example turning an image +from landscape to portrait format by rotation. + +jpegtran works by rearranging the compressed data (DCT coefficients), without +ever fully decoding the image. Therefore, its transformations are lossless: +there is no image degradation at all, which would not be true if you used +djpeg followed by cjpeg to accomplish the same conversion. But by the same +token, jpegtran cannot perform lossy operations such as changing the image +quality. + +jpegtran uses a command line syntax similar to cjpeg or djpeg. +On Unix-like systems, you say: + jpegtran [switches] [inputfile] >outputfile +On most non-Unix systems, you say: + jpegtran [switches] inputfile outputfile +where both the input and output files are JPEG files. + +To specify the coded JPEG representation used in the output file, +jpegtran accepts a subset of the switches recognized by cjpeg: + -optimize Perform optimization of entropy encoding parameters. + -progressive Create progressive JPEG file. + -restart N Emit a JPEG restart marker every N MCU rows, or every + N MCU blocks if "B" is attached to the number. + -arithmetic Use arithmetic coding. + -scans file Use the scan script given in the specified text file. +See the previous discussion of cjpeg for more details about these switches. +If you specify none of these switches, you get a plain baseline-JPEG output +file. The quality setting and so forth are determined by the input file. + +The image can be losslessly transformed by giving one of these switches: + -flip horizontal Mirror image horizontally (left-right). + -flip vertical Mirror image vertically (top-bottom). + -rotate 90 Rotate image 90 degrees clockwise. + -rotate 180 Rotate image 180 degrees. + -rotate 270 Rotate image 270 degrees clockwise (or 90 ccw). + -transpose Transpose image (across UL-to-LR axis). + -transverse Transverse transpose (across UR-to-LL axis). + +The transpose transformation has no restrictions regarding image dimensions. +The other transformations operate rather oddly if the image dimensions are not +a multiple of the iMCU size (usually 8 or 16 pixels), because they can only +transform complete blocks of DCT coefficient data in the desired way. + +jpegtran's default behavior when transforming an odd-size image is designed +to preserve exact reversibility and mathematical consistency of the +transformation set. As stated, transpose is able to flip the entire image +area. Horizontal mirroring leaves any partial iMCU column at the right edge +untouched, but is able to flip all rows of the image. Similarly, vertical +mirroring leaves any partial iMCU row at the bottom edge untouched, but is +able to flip all columns. The other transforms can be built up as sequences +of transpose and flip operations; for consistency, their actions on edge +pixels are defined to be the same as the end result of the corresponding +transpose-and-flip sequence. + +For practical use, you may prefer to discard any untransformable edge pixels +rather than having a strange-looking strip along the right and/or bottom edges +of a transformed image. To do this, add the -trim switch: + -trim Drop non-transformable edge blocks. +Obviously, a transformation with -trim is not reversible, so strictly speaking +jpegtran with this switch is not lossless. Also, the expected mathematical +equivalences between the transformations no longer hold. For example, +"-rot 270 -trim" trims only the bottom edge, but "-rot 90 -trim" followed by +"-rot 180 -trim" trims both edges. + +If you are only interested in perfect transformation, add the -perfect switch: + -perfect Fails with an error if the transformation is not + perfect. +For example you may want to do + jpegtran -rot 90 -perfect foo.jpg || djpeg foo.jpg | pnmflip -r90 | cjpeg +to do a perfect rotation if available or an approximated one if not. + +We also offer a lossless-crop option, which discards data outside a given +image region but losslessly preserves what is inside. Like the rotate and +flip transforms, lossless crop is restricted by the current JPEG format: the +upper left corner of the selected region must fall on an iMCU boundary. If +this does not hold for the given crop parameters, we silently move the upper +left corner up and/or left to make it so, simultaneously increasing the region +dimensions to keep the lower right crop corner unchanged. (Thus, the output +image covers at least the requested region, but may cover more.) + +The image can be losslessly cropped by giving the switch: + -crop WxH+X+Y Crop to a rectangular subarea of width W, height H + starting at point X,Y. + +Other not-strictly-lossless transformation switches are: + + -grayscale Force grayscale output. +This option discards the chrominance channels if the input image is YCbCr +(ie, a standard color JPEG), resulting in a grayscale JPEG file. The +luminance channel is preserved exactly, so this is a better method of reducing +to grayscale than decompression, conversion, and recompression. This switch +is particularly handy for fixing a monochrome picture that was mistakenly +encoded as a color JPEG. (In such a case, the space savings from getting rid +of the near-empty chroma channels won't be large; but the decoding time for +a grayscale JPEG is substantially less than that for a color JPEG.) + + -scale M/N Scale the output image by a factor M/N. +Currently supported scale factors are M/N with all M from 1 to 16, where N is +the source DCT size, which is 8 for baseline JPEG. If the /N part is omitted, +then M specifies the DCT scaled size to be applied on the given input. For +baseline JPEG this is equivalent to M/8 scaling, since the source DCT size +for baseline JPEG is 8. CAUTION: An implementation of the JPEG SmartScale +extension is required for this feature. SmartScale enabled JPEG is not yet +widely implemented, so many decoders will be unable to view a SmartScale +extended JPEG file at all. + +jpegtran also recognizes these switches that control what to do with "extra" +markers, such as comment blocks: + -copy none Copy no extra markers from source file. This setting + suppresses all comments and other excess baggage + present in the source file. + -copy comments Copy only comment markers. This setting copies + comments from the source file, but discards + any other inessential (for image display) data. + -copy all Copy all extra markers. This setting preserves + miscellaneous markers found in the source file, such + as JFIF thumbnails, Exif data, and Photoshop settings. + In some files these extra markers can be sizable. +The default behavior is -copy comments. (Note: in IJG releases v6 and v6a, +jpegtran always did the equivalent of -copy none.) + +Additional switches recognized by jpegtran are: + -outfile filename + -maxmemory N + -verbose + -debug +These work the same as in cjpeg or djpeg. + + +THE COMMENT UTILITIES + +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. + +We provide two utility programs to display COM block contents and add COM +blocks to a JPEG file. + +rdjpgcom searches a JPEG file and prints the contents of any COM blocks on +standard output. The command line syntax is + rdjpgcom [-raw] [-verbose] [inputfilename] +The switch "-raw" (or just "-r") causes rdjpgcom to also output non-printable +characters in comments, which are normally escaped for security reasons. +The switch "-verbose" (or just "-v") causes rdjpgcom to also display the JPEG +image dimensions. If you omit the input file name from the command line, +the JPEG file is read from standard input. (This may not work on some +operating systems, if binary data can't be read from stdin.) + +wrjpgcom adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks, but you +can delete the old COM blocks if you wish. wrjpgcom produces a new JPEG +file; it does not modify the input file. DO NOT try to overwrite the input +file by directing wrjpgcom's output back into it; on most systems this will +just destroy your file. + +The command line syntax for wrjpgcom is similar to cjpeg's. On Unix-like +systems, it is + wrjpgcom [switches] [inputfilename] +The output file is written to standard output. The input file comes from +the named file, or from standard input if no input file is named. + +On most non-Unix systems, the syntax is + wrjpgcom [switches] inputfilename outputfilename +where both input and output file names must be given explicitly. + +wrjpgcom understands three switches: + -replace Delete any existing COM blocks from the file. + -comment "Comment text" Supply new COM text on command line. + -cfile name Read text for new COM block from named file. +(Switch names can be abbreviated.) If you have only one line of comment text +to add, you can provide it on the command line with -comment. The comment +text must be surrounded with quotes so that it is treated as a single +argument. Longer comments can be read from a text file. + +If you give neither -comment nor -cfile, then wrjpgcom will read the comment +text from standard input. (In this case an input image file name MUST be +supplied, so that the source JPEG file comes from somewhere else.) You can +enter multiple lines, up to 64KB worth. Type an end-of-file indicator +(usually control-D or control-Z) to terminate the comment text entry. + +wrjpgcom will not add a COM block if the provided comment string is empty. +Therefore -replace -comment "" can be used to delete all COM blocks from a +file. + +These utility programs do not depend on the IJG JPEG library. In +particular, the source code for rdjpgcom is intended as an illustration of +the minimum amount of code required to parse a JPEG file header correctly. diff --git a/src/3rdparty/libjpeg/wizard.txt b/src/3rdparty/libjpeg/wizard.txt new file mode 100644 index 0000000..54170b2 --- /dev/null +++ b/src/3rdparty/libjpeg/wizard.txt @@ -0,0 +1,211 @@ +Advanced usage instructions for the Independent JPEG Group's JPEG software +========================================================================== + +This file describes cjpeg's "switches for wizards". + +The "wizard" switches are intended for experimentation with JPEG by persons +who are reasonably knowledgeable about the JPEG standard. If you don't know +what you are doing, DON'T USE THESE SWITCHES. You'll likely produce files +with worse image quality and/or poorer compression than you'd get from the +default settings. Furthermore, these switches must be used with caution +when making files intended for general use, because not all JPEG decoders +will support unusual JPEG parameter settings. + + +Quantization Table Adjustment +----------------------------- + +Ordinarily, cjpeg starts with a default set of tables (the same ones given +as examples in the JPEG standard) and scales them up or down according to +the -quality setting. The details of the scaling algorithm can be found in +jcparam.c. At very low quality settings, some quantization table entries +can get scaled up to values exceeding 255. Although 2-byte quantization +values are supported by the IJG software, this feature is not in baseline +JPEG and is not supported by all implementations. If you need to ensure +wide compatibility of low-quality files, you can constrain the scaled +quantization values to no more than 255 by giving the -baseline switch. +Note that use of -baseline will result in poorer quality for the same file +size, since more bits than necessary are expended on higher AC coefficients. + +You can substitute a different set of quantization values by using the +-qtables switch: + + -qtables file Use the quantization tables given in the named file. + +The specified file should be a text file containing decimal quantization +values. The file should contain one to four tables, each of 64 elements. +The tables are implicitly numbered 0,1,etc. in order of appearance. Table +entries appear in normal array order (NOT in the zigzag order in which they +will be stored in the JPEG file). + +Quantization table files are free format, in that arbitrary whitespace can +appear between numbers. Also, comments can be included: a comment starts +with '#' and extends to the end of the line. Here is an example file that +duplicates the default quantization tables: + + # Quantization tables given in JPEG spec, section K.1 + + # This is table 0 (the luminance table): + 16 11 10 16 24 40 51 61 + 12 12 14 19 26 58 60 55 + 14 13 16 24 40 57 69 56 + 14 17 22 29 51 87 80 62 + 18 22 37 56 68 109 103 77 + 24 35 55 64 81 104 113 92 + 49 64 78 87 103 121 120 101 + 72 92 95 98 112 100 103 99 + + # This is table 1 (the chrominance table): + 17 18 24 47 99 99 99 99 + 18 21 26 66 99 99 99 99 + 24 26 56 99 99 99 99 99 + 47 66 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + 99 99 99 99 99 99 99 99 + +If the -qtables switch is used without -quality, then the specified tables +are used exactly as-is. If both -qtables and -quality are used, then the +tables taken from the file are scaled in the same fashion that the default +tables would be scaled for that quality setting. If -baseline appears, then +the quantization values are constrained to the range 1-255. + +By default, cjpeg will use quantization table 0 for luminance components and +table 1 for chrominance components. To override this choice, use the -qslots +switch: + + -qslots N[,...] Select which quantization table to use for + each color component. + +The -qslots switch specifies a quantization table number for each color +component, in the order in which the components appear in the JPEG SOF marker. +For example, to create a separate table for each of Y,Cb,Cr, you could +provide a -qtables file that defines three quantization tables and say +"-qslots 0,1,2". If -qslots gives fewer table numbers than there are color +components, then the last table number is repeated as necessary. + + +Sampling Factor Adjustment +-------------------------- + +By default, cjpeg uses 2:1 horizontal and vertical downsampling when +compressing YCbCr data, and no downsampling for all other color spaces. +You can override this default with the -sample switch: + + -sample HxV[,...] Set JPEG sampling factors for each color + component. + +The -sample switch specifies the JPEG sampling factors for each color +component, in the order in which they appear in the JPEG SOF marker. +If you specify fewer HxV pairs than there are components, the remaining +components are set to 1x1 sampling. For example, the default YCbCr setting +is equivalent to "-sample 2x2,1x1,1x1", which can be abbreviated to +"-sample 2x2". + +There are still some JPEG decoders in existence that support only 2x1 +sampling (also called 4:2:2 sampling). Compatibility with such decoders can +be achieved by specifying "-sample 2x1". This is not recommended unless +really necessary, since it increases file size and encoding/decoding time +with very little quality gain. + + +Multiple Scan / Progression Control +----------------------------------- + +By default, cjpeg emits a single-scan sequential JPEG file. The +-progressive switch generates a progressive JPEG file using a default series +of progression parameters. You can create multiple-scan sequential JPEG +files or progressive JPEG files with custom progression parameters by using +the -scans switch: + + -scans file Use the scan sequence given in the named file. + +The specified file should be a text file containing a "scan script". +The script specifies the contents and ordering of the scans to be emitted. +Each entry in the script defines one scan. A scan definition specifies +the components to be included in the scan, and for progressive JPEG it also +specifies the progression parameters Ss,Se,Ah,Al for the scan. Scan +definitions are separated by semicolons (';'). A semicolon after the last +scan definition is optional. + +Each scan definition contains one to four component indexes, optionally +followed by a colon (':') and the four progressive-JPEG parameters. The +component indexes denote which color component(s) are to be transmitted in +the scan. Components are numbered in the order in which they appear in the +JPEG SOF marker, with the first component being numbered 0. (Note that these +indexes are not the "component ID" codes assigned to the components, just +positional indexes.) + +The progression parameters for each scan are: + Ss Zigzag index of first coefficient included in scan + Se Zigzag index of last coefficient included in scan + Ah Zero for first scan of a coefficient, else Al of prior scan + Al Successive approximation low bit position for scan +If the progression parameters are omitted, the values 0,63,0,0 are used, +producing a sequential JPEG file. cjpeg automatically determines whether +the script represents a progressive or sequential file, by observing whether +Ss and Se values other than 0 and 63 appear. (The -progressive switch is +not needed to specify this; in fact, it is ignored when -scans appears.) +The scan script must meet the JPEG restrictions on progression sequences. +(cjpeg checks that the spec's requirements are obeyed.) + +Scan script files are free format, in that arbitrary whitespace can appear +between numbers and around punctuation. Also, comments can be included: a +comment starts with '#' and extends to the end of the line. For additional +legibility, commas or dashes can be placed between values. (Actually, any +single punctuation character other than ':' or ';' can be inserted.) For +example, the following two scan definitions are equivalent: + 0 1 2: 0 63 0 0; + 0,1,2 : 0-63, 0,0 ; + +Here is an example of a scan script that generates a partially interleaved +sequential JPEG file: + + 0; # Y only in first scan + 1 2; # Cb and Cr in second scan + +Here is an example of a progressive scan script using only spectral selection +(no successive approximation): + + # Interleaved DC scan for Y,Cb,Cr: + 0,1,2: 0-0, 0, 0 ; + # AC scans: + 0: 1-2, 0, 0 ; # First two Y AC coefficients + 0: 3-5, 0, 0 ; # Three more + 1: 1-63, 0, 0 ; # All AC coefficients for Cb + 2: 1-63, 0, 0 ; # All AC coefficients for Cr + 0: 6-9, 0, 0 ; # More Y coefficients + 0: 10-63, 0, 0 ; # Remaining Y coefficients + +Here is an example of a successive-approximation script. This is equivalent +to the default script used by "cjpeg -progressive" for YCbCr images: + + # Initial DC scan for Y,Cb,Cr (lowest bit not sent) + 0,1,2: 0-0, 0, 1 ; + # First AC scan: send first 5 Y AC coefficients, minus 2 lowest bits: + 0: 1-5, 0, 2 ; + # Send all Cr,Cb AC coefficients, minus lowest bit: + # (chroma data is usually too small to be worth subdividing further; + # but note we send Cr first since eye is least sensitive to Cb) + 2: 1-63, 0, 1 ; + 1: 1-63, 0, 1 ; + # Send remaining Y AC coefficients, minus 2 lowest bits: + 0: 6-63, 0, 2 ; + # Send next-to-lowest bit of all Y AC coefficients: + 0: 1-63, 2, 1 ; + # At this point we've sent all but the lowest bit of all coefficients. + # Send lowest bit of DC coefficients + 0,1,2: 0-0, 1, 0 ; + # Send lowest bit of AC coefficients + 2: 1-63, 1, 0 ; + 1: 1-63, 1, 0 ; + # Y AC lowest bit scan is last; it's usually the largest scan + 0: 1-63, 1, 0 ; + +It may be worth pointing out that this script is tuned for quality settings +of around 50 to 75. For lower quality settings, you'd probably want to use +a script with fewer stages of successive approximation (otherwise the +initial scans will be really bad). For higher quality settings, you might +want to use more stages of successive approximation (so that the initial +scans are not too large). diff --git a/src/3rdparty/libjpeg/wrjpgcom.1 b/src/3rdparty/libjpeg/wrjpgcom.1 new file mode 100644 index 0000000..d419a99 --- /dev/null +++ b/src/3rdparty/libjpeg/wrjpgcom.1 @@ -0,0 +1,103 @@ +.TH WRJPGCOM 1 "15 June 1995" +.SH NAME +wrjpgcom \- insert text comments into a JPEG file +.SH SYNOPSIS +.B wrjpgcom +[ +.B \-replace +] +[ +.BI \-comment " text" +] +[ +.BI \-cfile " name" +] +[ +.I filename +] +.LP +.SH DESCRIPTION +.LP +.B wrjpgcom +reads the named JPEG/JFIF file, or the standard input if no file is named, +and generates a new JPEG/JFIF file on standard output. A comment block is +added to the file. +.PP +The JPEG standard allows "comment" (COM) blocks to occur within a JPEG file. +Although the standard doesn't actually define what COM blocks are for, they +are widely used to hold user-supplied text strings. This lets you add +annotations, titles, index terms, etc to your JPEG files, and later retrieve +them as text. COM blocks do not interfere with the image stored in the JPEG +file. The maximum size of a COM block is 64K, but you can have as many of +them as you like in one JPEG file. +.PP +.B wrjpgcom +adds a COM block, containing text you provide, to a JPEG file. +Ordinarily, the COM block is added after any existing COM blocks; but you +can delete the old COM blocks if you wish. +.SH OPTIONS +Switch names may be abbreviated, and are not case sensitive. +.TP +.B \-replace +Delete any existing COM blocks from the file. +.TP +.BI \-comment " text" +Supply text for new COM block on command line. +.TP +.BI \-cfile " name" +Read text for new COM block from named file. +.PP +If you have only one line of comment text to add, you can provide it on the +command line with +.BR \-comment . +The comment text must be surrounded with quotes so that it is treated as a +single argument. Longer comments can be read from a text file. +.PP +If you give neither +.B \-comment +nor +.BR \-cfile , +then +.B wrjpgcom +will read the comment text from standard input. (In this case an input image +file name MUST be supplied, so that the source JPEG file comes from somewhere +else.) You can enter multiple lines, up to 64KB worth. Type an end-of-file +indicator (usually control-D) to terminate the comment text entry. +.PP +.B wrjpgcom +will not add a COM block if the provided comment string is empty. Therefore +\fB\-replace \-comment ""\fR can be used to delete all COM blocks from a file. +.SH EXAMPLES +.LP +Add a short comment to in.jpg, producing out.jpg: +.IP +.B wrjpgcom \-c +\fI"View of my back yard" in.jpg +.B > +.I out.jpg +.PP +Attach a long comment previously stored in comment.txt: +.IP +.B wrjpgcom +.I in.jpg +.B < +.I comment.txt +.B > +.I out.jpg +.PP +or equivalently +.IP +.B wrjpgcom +.B -cfile +.I comment.txt +.B < +.I in.jpg +.B > +.I out.jpg +.SH SEE ALSO +.BR cjpeg (1), +.BR djpeg (1), +.BR jpegtran (1), +.BR rdjpgcom (1) +.SH AUTHOR +Independent JPEG Group -- cgit v0.12