/****************************************************************************
**
** Copyright (C) 2012 Digia Plc and/or its subsidiary(-ies).
** Contact: http://www.qt-project.org/legal
**
** This file is part of the examples of the Qt Toolkit.
**
** $QT_BEGIN_LICENSE:BSD$
** You may use this file under the terms of the BSD license as follows:
**
** "Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions are
** met:
**   * Redistributions of source code must retain the above copyright
**     notice, this list of conditions and the following disclaimer.
**   * Redistributions in binary form must reproduce the above copyright
**     notice, this list of conditions and the following disclaimer in
**     the documentation and/or other materials provided with the
**     distribution.
**   * Neither the name of Digia Plc and its Subsidiary(-ies) nor the names
**     of its contributors may be used to endorse or promote products derived
**     from this software without specific prior written permission.
**
**
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
** "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
** LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
** A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
** OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
** SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
** LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE."
**
** $QT_END_LICENSE$
**
****************************************************************************/

#include "spectrumanalyser.h"
#include "utils.h"

#include <QtCore/qmath.h>
#include <QtCore/qmetatype.h>
#include <QtMultimedia/QAudioFormat>
#include <QThread>

#include "fftreal_wrapper.h"

SpectrumAnalyserThread::SpectrumAnalyserThread(QObject *parent)
    :   QObject(parent)
#ifndef DISABLE_FFT
    ,   m_fft(new FFTRealWrapper)
#endif
    ,   m_numSamples(SpectrumLengthSamples)
    ,   m_windowFunction(DefaultWindowFunction)
    ,   m_window(SpectrumLengthSamples, 0.0)
    ,   m_input(SpectrumLengthSamples, 0.0)
    ,   m_output(SpectrumLengthSamples, 0.0)
    ,   m_spectrum(SpectrumLengthSamples)
#ifdef SPECTRUM_ANALYSER_SEPARATE_THREAD
    ,   m_thread(new QThread(this))
#endif
{
#ifdef SPECTRUM_ANALYSER_SEPARATE_THREAD
    // moveToThread() cannot be called on a QObject with a parent
    setParent(0);
    moveToThread(m_thread);
    m_thread->start();
#endif
    calculateWindow();
}

SpectrumAnalyserThread::~SpectrumAnalyserThread()
{
#ifndef DISABLE_FFT
    delete m_fft;
#endif
}

void SpectrumAnalyserThread::setWindowFunction(WindowFunction type)
{
    m_windowFunction = type;
    calculateWindow();
}

void SpectrumAnalyserThread::calculateWindow()
{
    for (int i=0; i<m_numSamples; ++i) {
        DataType x = 0.0;

        switch (m_windowFunction) {
        case NoWindow:
            x = 1.0;
            break;
        case HannWindow:
            x = 0.5 * (1 - qCos((2 * M_PI * i) / (m_numSamples - 1)));
            break;
        default:
            Q_ASSERT(false);
        }

        m_window[i] = x;
    }
}

void SpectrumAnalyserThread::calculateSpectrum(const QByteArray &buffer,
                                                int inputFrequency,
                                                int bytesPerSample)
{
#ifndef DISABLE_FFT
    Q_ASSERT(buffer.size() == m_numSamples * bytesPerSample);

    // Initialize data array
    const char *ptr = buffer.constData();
    for (int i=0; i<m_numSamples; ++i) {
        const qint16 pcmSample = *reinterpret_cast<const qint16*>(ptr);
        // Scale down to range [-1.0, 1.0]
        const DataType realSample = pcmToReal(pcmSample);
        const DataType windowedSample = realSample * m_window[i];
        m_input[i] = windowedSample;
        ptr += bytesPerSample;
    }

    // Calculate the FFT
    m_fft->calculateFFT(m_output.data(), m_input.data());

    // Analyze output to obtain amplitude and phase for each frequency
    for (int i=2; i<=m_numSamples/2; ++i) {
        // Calculate frequency of this complex sample
        m_spectrum[i].frequency = qreal(i * inputFrequency) / (m_numSamples);

        const qreal real = m_output[i];
        qreal imag = 0.0;
        if (i>0 && i<m_numSamples/2)
            imag = m_output[m_numSamples/2 + i];

        const qreal magnitude = sqrt(real*real + imag*imag);
        qreal amplitude = SpectrumAnalyserMultiplier * log(magnitude);

        // Bound amplitude to [0.0, 1.0]
        m_spectrum[i].clipped = (amplitude > 1.0);
        amplitude = qMax(qreal(0.0), amplitude);
        amplitude = qMin(qreal(1.0), amplitude);
        m_spectrum[i].amplitude = amplitude;
    }
#endif

    emit calculationComplete(m_spectrum);
}


//=============================================================================
// SpectrumAnalyser
//=============================================================================

SpectrumAnalyser::SpectrumAnalyser(QObject *parent)
    :   QObject(parent)
    ,   m_thread(new SpectrumAnalyserThread(this))
    ,   m_state(Idle)
#ifdef DUMP_SPECTRUMANALYSER
    ,   m_count(0)
#endif
{
    CHECKED_CONNECT(m_thread, SIGNAL(calculationComplete(FrequencySpectrum)),
                    this, SLOT(calculationComplete(FrequencySpectrum)));
}

SpectrumAnalyser::~SpectrumAnalyser()
{

}

#ifdef DUMP_SPECTRUMANALYSER
void SpectrumAnalyser::setOutputPath(const QString &outputDir)
{
    m_outputDir.setPath(outputDir);
    m_textFile.setFileName(m_outputDir.filePath("spectrum.txt"));
    m_textFile.open(QIODevice::WriteOnly | QIODevice::Text);
    m_textStream.setDevice(&m_textFile);
}
#endif

//-----------------------------------------------------------------------------
// Public functions
//-----------------------------------------------------------------------------

void SpectrumAnalyser::setWindowFunction(WindowFunction type)
{
    const bool b = QMetaObject::invokeMethod(m_thread, "setWindowFunction",
                              Qt::AutoConnection,
                              Q_ARG(WindowFunction, type));
    Q_ASSERT(b);
    Q_UNUSED(b) // suppress warnings in release builds
}

void SpectrumAnalyser::calculate(const QByteArray &buffer,
                         const QAudioFormat &format)
{
    // QThread::currentThread is marked 'for internal use only', but
    // we're only using it for debug output here, so it's probably OK :)
    SPECTRUMANALYSER_DEBUG << "SpectrumAnalyser::calculate"
                           << QThread::currentThread()
                           << "state" << m_state;

    if (isReady()) {
        Q_ASSERT(isPCMS16LE(format));

        const int bytesPerSample = format.sampleSize() * format.channels() / 8;

#ifdef DUMP_SPECTRUMANALYSER
        m_count++;
        const QString pcmFileName = m_outputDir.filePath(QString("spectrum_%1.pcm").arg(m_count, 4, 10, QChar('0')));
        QFile pcmFile(pcmFileName);
        pcmFile.open(QIODevice::WriteOnly);
        const int bufferLength = m_numSamples * bytesPerSample;
        pcmFile.write(buffer, bufferLength);

        m_textStream << "TimeDomain " << m_count << "\n";
        const qint16* input = reinterpret_cast<const qint16*>(buffer);
        for (int i=0; i<m_numSamples; ++i) {
            m_textStream << i << "\t" << *input << "\n";
            input += format.channels();
        }
#endif

        m_state = Busy;

        // Invoke SpectrumAnalyserThread::calculateSpectrum using QMetaObject.  If
        // m_thread is in a different thread from the current thread, the
        // calculation will be done in the child thread.
        // Once the calculation is finished, a calculationChanged signal will be
        // emitted by m_thread.
        const bool b = QMetaObject::invokeMethod(m_thread, "calculateSpectrum",
                                  Qt::AutoConnection,
                                  Q_ARG(QByteArray, buffer),
                                  Q_ARG(int, format.frequency()),
                                  Q_ARG(int, bytesPerSample));
        Q_ASSERT(b);
        Q_UNUSED(b) // suppress warnings in release builds

#ifdef DUMP_SPECTRUMANALYSER
        m_textStream << "FrequencySpectrum " << m_count << "\n";
        FrequencySpectrum::const_iterator x = m_spectrum.begin();
        for (int i=0; i<m_numSamples; ++i, ++x)
            m_textStream << i << "\t"
                         << x->frequency << "\t"
                         << x->amplitude<< "\t"
                         << x->phase << "\n";
#endif
    }
}

bool SpectrumAnalyser::isReady() const
{
    return (Idle == m_state);
}

void SpectrumAnalyser::cancelCalculation()
{
    if (Busy == m_state)
        m_state = Cancelled;
}


//-----------------------------------------------------------------------------
// Private slots
//-----------------------------------------------------------------------------

void SpectrumAnalyser::calculationComplete(const FrequencySpectrum &spectrum)
{
    Q_ASSERT(Idle != m_state);
    if (Busy == m_state)
        emit spectrumChanged(spectrum);
    m_state = Idle;
}