/**************************************************************************** ** ** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies). ** All rights reserved. ** Contact: Nokia Corporation (qt-info@nokia.com) ** ** This file is part of the documentation of the Qt Toolkit. ** ** $QT_BEGIN_LICENSE:LGPL$ ** No Commercial Usage ** This file contains pre-release code and may not be distributed. ** You may use this file in accordance with the terms and conditions ** contained in the Technology Preview License Agreement accompanying ** this package. ** ** GNU Lesser General Public License Usage ** Alternatively, this file may be used under the terms of the GNU Lesser ** General Public License version 2.1 as published by the Free Software ** Foundation and appearing in the file LICENSE.LGPL included in the ** packaging of this file. Please review the following information to ** ensure the GNU Lesser General Public License version 2.1 requirements ** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html. ** ** In addition, as a special exception, Nokia gives you certain additional ** rights. These rights are described in the Nokia Qt LGPL Exception ** version 1.1, included in the file LGPL_EXCEPTION.txt in this package. ** ** If you have questions regarding the use of this file, please contact ** Nokia at qt-info@nokia.com. ** ** ** ** ** ** ** ** ** $QT_END_LICENSE$ ** ****************************************************************************/ /*! \page qmake-manual.html \title qmake Manual \startpage {index.html}{Qt Reference Documentation} \nextpage qmake Tutorial \ingroup qttools \keyword qmake \c qmake is a tool that helps simplify the build process for development project across different platforms. \c qmake automates the generation of Makefiles so that only a few lines of information are needed to create each Makefile. \c qmake can be used for any software project, whether it is written in Qt or not. \c qmake generates a Makefile based on the information in a project file. Project files are created by the developer, and are usually simple, but more sophisticated project files can be created for complex projects. \c qmake contains additional features to support development with Qt, automatically including build rules for \l{moc.html}{moc} and \l{uic.html}{uic}. \c qmake can also generate projects for Microsoft Visual studio without requiring the developer to change the project file. \section1 Getting Started The \l{qmake Tutorial} and guide to \l{qmake Common Projects} provide overviews that aim to help new users get started with \c qmake. \list \o \l{qmake Tutorial} \tableofcontents{1 qmake Tutorial} \endlist \list \o \l{qmake Common Projects} \tableofcontents{1 qmake Common Projects} \endlist \section1 Table of Contents \list \o \l{Using qmake} \tableofcontents{1 Using qmake} \o \l{qmake Project Files} \tableofcontents{1 qmake Project Files} \o \l{Running qmake} \tableofcontents{1 Running qmake} \o \l{qmake Platform Notes} \tableofcontents{1 qmake Platform Notes} \o \l{qmake Advanced Usage} \tableofcontents{1 qmake Advanced Usage} \o \l{Using Precompiled Headers} \tableofcontents{1 Using Precompiled Headers} \o \l{qmake Reference} \tableofcontents{1 qmake Reference} \o \l{qmake Variable Reference} \tableofcontents{1 qmake Variable Reference} \o \l{qmake Function Reference} \tableofcontents{1 qmake Function Reference} \o \l{Configuring qmake's Environment} \tableofcontents{1 Configuring qmake's Environment} \endlist */ /*! \page qmake-using.html \title Using qmake \contentspage {qmake Manual}{Contents} \previouspage qmake Manual \nextpage qmake Project Files \c qmake provides a project-oriented system for managing the build process for applications, libraries, and other components. This approach gives developers control over the source files used, and allows each of the steps in the process to be described concisely, typically within a single file. \c qmake expands the information in each project file to a Makefile that executes the necessary commands for compiling and linking. In this document, we provide a basic introduction to project files, describe some of the main features of \c qmake, and show how to use \c qmake on the command line. \section1 Describing a Project Projects are described by the contents of project (\c .pro) files. The information within these is used by \c qmake to generate a Makefile containing all the commands that are needed to build each project. Project files typically contain a list of source and header files, general configuration information, and any application-specific details, such as a list of extra libraries to link against, or a list of extra include paths to use. Project files can contain a number of different elements, including comments, variable declarations, built-in functions, and some simple control structures. In most simple projects, it is only necessary to declare the source and header files that are used to build the project with some basic configuration options. Complete examples of project files can be found in the \l{qmake Tutorial}. An introduction to project files can be found in the \l{qmake Project Files} chapter, and a more detailed description is available in the \l{qmake Reference}. \section1 Building a Project For simple projects, you only need to run \c qmake in the top level directory of your project. By default, \c qmake generates a Makefile that you then use to build the project, and you can then run your platform's \c make tool to build the project. \c qmake can also be used to generate project files. A full description of \c{qmake}'s command line options can be found in the \l{Running qmake} chapter of this manual. \section1 Using Precompiled Headers In large projects, it is possible to take advantage of precompiled header files to speed up the build process. This feature is described in detail in the \l{Using Precompiled Headers} chapter. */ /*! \page qmake-project-files.html \title qmake Project Files \contentspage {qmake Manual}{Contents} \previouspage Using qmake \nextpage Running qmake Project files contain all the information required by \c qmake to build your application, library, or plugin. The resources used by your project are generally specified using a series of declarations, but support for simple programming constructs allow you to describe different build processes for different platforms and environments. \tableofcontents \section1 Project File Elements The project file format used by \c qmake can be used to support both simple and fairly complex build systems. Simple project files will use a straightforward declarative style, defining standard variables to indicate the source and header files that are used in the project. Complex projects may use the control flow structures to fine-tune the build process. The following sections describe the different types of elements used in project files. \section2 Variables In a project file, variables are used to hold lists of strings. In the simplest projects, these variables inform \c qmake about the configuration options to use, or supply filenames and paths to use in the build process. \c qmake looks for certain variables in each project file, and it uses the contents of these to determine what it should write to a Makefile. For example, the list of values in the \c HEADERS and \c SOURCES variables are used to tell \c qmake about header and source files in the same directory as the project file. Variables can also be used internally to store temporary lists of values, and existing lists of values can be overwritten or extended with new values. The following lines show how lists of values are assigned to variables: \snippet doc/src/snippets/qmake/variables.pro 0 Note that the first assignment only includes values that are specified on the same line as the \c SOURCES variable. The second assignment splits the items across lines by using the \c \\ character. The list of values in a variable is extended in the following way: \snippet doc/src/snippets/qmake/variables.pro 1 The \c CONFIG variable is another special variable that \c qmake uses when generating a Makefile. It is discussed in the section on \l{#GeneralConfiguration}{general configuration} later in this chapter. In the above line, \c qt is added to the list of existing values contained in \c CONFIG. The following table lists the variables that \c qmake recognizes, and describes what they should contain. \table \header \o Variable \o Contents \row \o CONFIG \o General project configuration options. \row \o DESTDIR \o The directory in which the executable or binary file will be placed. \row \o FORMS \o A list of UI files to be processed by \c uic. \row \o HEADERS \o A list of filenames of header (.h) files used when building the project. \row \o QT \o Qt-specific configuration options. \row \o RESOURCES \o A list of resource (.rc) files to be included in the final project. See the \l{The Qt Resource System} for more information about these files. \row \o SOURCES \o A list of source code files to be used when building the project. \row \o TEMPLATE \o The template to use for the project. This determines whether the output of the build process will be an application, a library, or a plugin. \endtable The contents of a variable can be read by prepending the variable name with \c $$. This can be used to assign the contents of one variable to another: \snippet doc/src/snippets/qmake/dereferencing.pro 0 The \c $$ operator is used extensively with built-in functions that operate on strings and lists of values. These are described in the chapter on \l{qmake Advanced Usage}. \section3 Whitespace Normally, variables are used to contain whitespace-separated lists of values. However, it is sometimes necessary to specify values containing spaces. These must be quoted by using the \l{qmake Function Reference#quote-string}{quote()} function in the following way: \snippet doc/src/snippets/qmake/quoting.pro 0 The quoted text is treated as a single item in the list of values held by the variable. A similar approach is used to deal with paths that contain spaces, particularly when defining the \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH} and \l{qmake Variable Reference#LIBS}{LIBS} variables for the Windows platform. In cases like these, the \l{qmake Function Reference#quote(string)}{quote()} function can be used in the following way: \snippet doc/src/snippets/qmake/spaces.pro quoting include paths with spaces \section2 Comments You can add comments to project files. Comments begin with the \c # character and continue to the end of the same line. For example: \snippet doc/src/snippets/qmake/comments.pro 0 To include the \c # character in variable assignments, it is necessary to use the contents of the built-in \c LITERAL_HASH variable. See the \l{qmake Variable Reference#LITERAL_HASH}{variable reference} for more information. \section2 Built-in Functions and Control Flow \c qmake provides a number of built-in functions to allow the contents of variables to be processed. The most commonly used function in simple project files is the \c include function which takes a filename as an argument. The contents of the given file are included in the project file at the place where the \c include function is used. The \c include function is most commonly used to include other project files: \snippet doc/src/snippets/qmake/include.pro 0 Support for conditional structures is made available via \l{qmake Advanced Usage#scopes}{scopes} that behave like \c if statements in programming languages: \snippet doc/src/snippets/qmake/scopes.pro 0 The assignments inside the braces are only made if the condition is true. In this case, the special \c win32 variable must be set; this happens automatically on Windows, but this can also be specified on other platforms by running \c qmake with the \c{-win32} command line option (see \l{Running qmake} for more information). The opening brace must stand on the same line as the condition. Simple loops are constructed by iterating over lists of values using the built-in \c for function. The following code adds directories to the \l{qmake Variable Reference#SUBDIRS}{SUBDIRS} variable, but only if they exist: \snippet doc/src/snippets/qmake/functions.pro 0 More complex operations on variables that would usually require loops are provided by built-in functions such as \c find, \c unique, and \c count. These functions, and many others are provided to manipulate strings and paths, support user input, and call external tools. A list of the functions available can be found in the \l{qmake Advanced Usage} chapter of this manual. \section1 Project Templates The \c TEMPLATE variable is used to define the type of project that will be built. If this is not declared in the project file, \c qmake assumes that an application should be built, and will generate an appropriate Makefile (or equivalent file) for the purpose. The types of project available are listed in the following table with information about the files that \c qmake will generate for each of them: \table \header \o Template \o Description of \c qmake output \row \o app (default) \o Creates a Makefile to build an application. \row \o lib \o Creates a Makefile to build a library. \row \o subdirs \o Creates a Makefile containing rules for the subdirectories specified using the \l{qmake Variable Reference#SUBDIRS}{SUBDIRS} variable. Each subdirectory must contain its own project file. \row \o vcapp \o Creates a Visual Studio Project file to build an application. \row \o vclib \o Creates a Visual Studio Project file to build a library. \endtable See the \l{qmake Tutorial} for advice on writing project files for projects that use the \c app and \c lib templates. When the \c subdirs template is used, \c qmake generates a Makefile to examine each specified subdirectory, process any project file it finds there, and run the platform's \c make tool on the newly-created Makefile. The \l{qmake Variable Reference#SUBDIRS}{SUBDIRS} variable is used to contain a list of all the subdirectories to be processed. \target GeneralConfiguration \section1 General Configuration The \l{qmake Variable Reference#CONFIG}{CONFIG variable} specifies the options and features that the compiler should use and the libraries that should be linked against. Anything can be added to the \c CONFIG variable, but the options covered below are recognized by \c qmake internally. The following options control the compiler flags that are used to build the project: \table \header \o Option \o Description \row \o release \o The project is to be built in release mode. This is ignored if \c debug is also specified. \row \o debug \o The project is to be built in debug mode. \row \o debug_and_release \o The project is built in \e both debug and release modes. \row \o debug_and_release_target \o The project is built in \e both debug and release modes. TARGET is built into \e both the debug and release directories. \row \o build_all \o If \c debug_and_release is specified, the project is built in both debug and release modes by default. \row \o autogen_precompile_source \o Automatically generates a \c .cpp file that includes the precompiled header file specified in the .pro file. \row \o ordered \o When using the \c subdirs template, this option specifies that the directories listed should be processed in the order in which they are given. \row \o warn_on \o The compiler should output as many warnings as possible. This is ignored if \c warn_off is specified. \row \o warn_off \o The compiler should output as few warnings as possible. \row \o copy_dir_files \o Enables the install rule to also copy directories, not just files. \endtable The \c debug_and_release option is special in that it enables \e both debug and release versions of a project to be built. In such a case, the Makefile that \c qmake generates includes a rule that builds both versions, and this can be invoked in the following way: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 0 Adding the \c build_all option to the \c CONFIG variable makes this rule the default when building the project, and installation targets will be created for both debug and release builds. Note that each of the options specified in the \c CONFIG variable can also be used as a scope condition. You can test for the presence of certain configuration options by using the built-in \l{qmake Function Reference#CONFIG(config)}{CONFIG()} function. For example, the following lines show the function as the condition in a scope to test whether only the \c opengl option is in use: \snippet doc/src/snippets/qmake/configscopes.pro 4 \snippet doc/src/snippets/qmake/configscopes.pro 5 This enables different configurations to be defined for \c release and \c debug builds, and is described in more detail in the \l{qmake Advanced Usage#Scopes}{Scopes} section of the \l{qmake Advanced Usage}{Advanced Usage} chapter of this manual. The following options define the type of project to be built. Note that some of these options only take effect when used on the relevant platform. On other platforms, they have no effect. \table \header \o Option \o Description \row \o qt \o The project is a Qt application and should link against the Qt library. You can use the \c QT variable to control any additional Qt modules that are required by your application. \row \o thread \o The project is a multi-threaded application. \row \o x11 \o The project is an X11 application or library. \endtable When using \l{qmake Variable Reference#TEMPLATE}{application or library project templates}, more specialized configuration options can be used to fine tune the build process. These are explained in details in the \l{qmake-common-projects.html}{Common Projects} chapter of this manual. For example, if your application uses the Qt library and you want to build it as a multi-threaded application in \c debug mode, your project file will contain the following line: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 1 Note, that you must use "+=", not "=", or \c qmake will not be able to use Qt's configuration to determine the settings needed for your project. \section1 Declaring Qt Libraries If the \c CONFIG variable contains the \c qt value, qmake's support for Qt applications is enabled. This makes it possible to fine-tune which of the Qt modules are used by your application. This is achieved with the \c QT variable which can be used to declare the required extension modules. For example, we can enable the XML and network modules in the following way: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 2 Note that \c QT includes the \c core and \c gui modules by default, so the above declaration \e adds the network and XML modules to this default list. The following assignment \e omits the default modules, and will lead to errors when the application's source code is being compiled: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 3 If you want to build a project \e without the \c gui module, you need to exclude it with the "-=" operator. By default, \c QT contains both \c core and \c gui, so the following line will result in a minimal Qt project being built: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 4 The table below shows the options that can be used with the \c QT variable and the features that are associated with each of them: \table \header \o Option \o Features \row \o core (included by default) \o QtCore module \row \o gui (included by default) \o QtGui module \row \o network \o QtNetwork module \row \o opengl \o QtOpenGL module \row \o sql \o QtSql module \row \o svg \o QtSvg module \row \o xml \o QtXml module \row \o xmlpatterns \o QtXmlPatterns module \row \o qt3support \o Qt3Support module \endtable Note that adding the \c opengl option to the \c QT variable automatically causes the equivalent option to be added to the \c CONFIG variable. Therefore, for Qt applications, it is not necessary to add the \c opengl option to both \c CONFIG and \c{QT}. \section1 Configuration Features \c qmake can be set up with extra configuration features that are specified in feature (.prf) files. These extra features often provide support for custom tools that are used during the build process. To add a feature to the build process, append the feature name (the stem of the feature filename) to the \c CONFIG variable. For example, \c qmake can configure the build process to take advantage of external libraries that are supported by \l{http://www.freedesktop.org/wiki/Software_2fpkgconfig}{pkg-config}, such as the D-Bus and ogg libraries, with the following lines: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 5 More information about features can be found in the \l{qmake Advanced Usage#Adding New Configuration Features} {Adding New Configuration Features} section of the \l{qmake Advanced Usage} chapter. \section1 Declaring Other Libraries If you are using other libraries in your project in addition to those supplied with Qt, you need to specify them in your project file. The paths that \c qmake searches for libraries and the specific libraries to link against can be added to the list of values in the \l{qmake Variable Reference#LIBS}{LIBS} variable. The paths to the libraries themselves can be given, or the familiar Unix-style notation for specifying libraries and paths can be used if preferred. For example, the following lines show how a library can be specified: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 6 The paths containing header files can also be specified in a similar way using the \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH} variable. For example, it is possible to add several paths to be searched for header files: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 7 */ /*! \page qmake-running.html \title Running qmake \contentspage {qmake Manual}{Contents} \previouspage qmake Project Files \nextpage qmake Platform Notes The behavior of \c qmake can be customized when it is run by specifying various options on the command line. These allow the build process to be fine-tuned, provide useful diagnostic information, and can be used to specify the target platform for your project. \tableofcontents \target Commands \section1 Command-Line Options \section2 Syntax The syntax used to run \c qmake takes the following simple form: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 8 \c qmake supports two different modes of operation: In the default mode, \c qmake will use the description in a project file to generate a Makefile, but it is also possible to use \c qmake to generate project files. If you want to explicitly set the mode, you must specify it before all other options. The \c mode can be either of the following two values: \list \o \c -makefile \BR \c qmake output will be a Makefile. \o \c -project \BR \c qmake output will be a project file. \BR \bold{Note:} It is likely that the created file will need to be edited for example adding the \c QT variable to suit what modules are required for the project. \endlist The following \c options are used to specify both general and mode-specific settings. Options that only apply to the Makefile mode are described in the \l{#MakefileMode}{Makefile Mode Options} section; options that influence the creation of project files are described in the \l{#ProjectMode}{Project File Options} section. The \c files argument represents a list of one or more project files, separated by spaces. \section2 Options A wide range of options can be specified on the command line to \c qmake in order to customize the build process, and to override default settings for your platform. The following basic options provide usage information, specify where \c qmake writes the output file, and control the level of debugging information that will be written to the console: \list \o \c -help \BR \c qmake will go over these features and give some useful help. \o \c -o file \BR \c qmake output will be directed to \e file. If this option is not specified, \c qmake will try to use a suitable file name for its output, depending on the mode it is running in.\BR If '-' is specified, output is directed to stdout. \o \c -d \BR \c qmake will output debugging information. \endlist For projects that need to be built differently on each target platform, with many subdirectories, you can run \c qmake with each of the following options to set the corresponding platform-specific variable in each project file: \list \o \c -unix \BR \c qmake will run in unix mode. In this mode, Unix file naming and path conventions will be used, additionally testing for \c unix (as a scope) will succeed. This is the default mode on all Unices. \o \c -macx \BR \c qmake will run in Mac OS X mode. In this mode, Unix file naming and path conventions will be used, additionally testing for \c macx (as a scope) will succeed. This is the default mode on Mac OS X. \o \c -win32 \BR \c qmake will run in win32 mode. In this mode, Windows file naming and path conventions will be used, additionally testing for \c win32 (as a scope) will succeed. This is the default mode on Windows. \endlist The template used for the project is usually specified by the \c TEMPLATE variable in the project file. We can override or modify this by using the following options: \list \o \c -t tmpl \BR \c qmake will override any set \c TEMPLATE variables with tmpl, but only \e after the .pro file has been processed. \o \c -tp prefix \BR \c qmake will add the prefix to the \c TEMPLATE variable. \endlist The level of warning information can be fine-tuned to help you find problems in your project file: \list \o \c -Wall \BR \c qmake will report all known warnings. \o \c -Wnone \BR No warning information will be generated by \c qmake. \o \c -Wparser \BR \c qmake will only generate parser warnings. This will alert you to common pitfalls and potential problems in the parsing of your project files. \o \c -Wlogic \BR \c qmake will warn of common pitfalls and potential problems in your project file. For example, \c qmake will report whether a file is placed into a list of files multiple times, or if a file cannot be found. \endlist \target MakefileMode \section2 Makefile Mode Options \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 9 In Makefile mode, \c qmake will generate a Makefile that is used to build the project. Additionally, the following options may be used in this mode to influence the way the project file is generated: \list \o \c -after \BR \c qmake will process assignments given on the command line after the specified files. \o \c -nocache \BR \c qmake will ignore the .qmake.cache file. \o \c -nodepend \BR \c qmake will not generate any dependency information. \o \c -cache file \BR \c qmake will use \e file as the cache file, ignoring any other .qmake.cache files found. \o \c -spec spec \BR \c qmake will use \e spec as a path to platform and compiler information, and the value of \c QMAKESPEC will be ignored. \endlist You may also pass \c qmake assignments on the command line; they will be processed before all of the files specified. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 10 This will generate a Makefile, from test.pro with Unix pathnames. However many of the specified options aren't necessary as they are the default. Therefore, the line can be simplified on Unix to: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 11 If you are certain you want your variables processed after the files specified, then you may pass the \c -after option. When this is specified, all assignments on the command line after the \c -after option will be postponed until after the specified files are parsed. \target ProjectMode \section2 Project Mode Options \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 12 In project mode, \c qmake will generate a project file. Additionally, you may supply the following options in this mode: \list \o \c -r \BR \c qmake will look through supplied directories recursively \o \c -nopwd \BR \c qmake will not look in your current working directory for source code and only use the specified \c files \endlist In this mode, the \c files argument can be a list of files or directories. If a directory is specified, it will be included in the \c DEPENDPATH variable, and relevant code from there will be included in the generated project file. If a file is given, it will be appended to the correct variable, depending on its extension; for example, UI files are added to \c FORMS, and C++ files are added to \c SOURCES. You may also pass assignments on the command line in this mode. When doing so, these assignments will be placed last in the generated project file. */ /*! \page qmake-platform-notes.html \title qmake Platform Notes \contentspage {qmake Manual}{Contents} \previouspage Running qmake \nextpage qmake Advanced Usage Many cross-platform projects can be handled by the \c{qmake}'s basic configuration features. On some platforms, it is sometimes useful, or even necessary, to take advantage of platform-specific features. \c qmake knows about many of these features, and these can be accessed via specific variables that only have an effect on the platforms where they are relevant. \tableofcontents \section1 Mac OS X Features specific to this platform include support for creating universal binaries, frameworks and bundles. \section2 Source and Binary Packages The version of \c qmake supplied in source packages is configured slightly differently to that supplied in binary packages in that it uses a different feature specification. Where the source package typically uses the \c macx-g++ specification, the binary package is typically configured to use the \c macx-xcode specification. Users of each package can override this configuration by invoking \c qmake with the \c -spec option (see \l{Running qmake} for more information). This makes it possible, for example, to use \c qmake from a binary package to create a Makefile in a project directory with the following command line invocation: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 13 \section2 Using Frameworks \c qmake is able to automatically generate build rules for linking against frameworks in the standard framework directory on Mac OS X, located at \c{/Library/Frameworks/}. Directories other than the standard framework directory need to be specified to the build system, and this is achieved by appending linker options to the \l{qmake Variable Reference#QMAKE_LFLAGS}{QMAKE_LFLAGS} variable, as shown in the following example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 14 The framework itself is linked in by appending the \c{-framework} options and the name of the framework to the \l{qmake Variable Reference#LIBS}{LIBS} variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 15 \section2 Creating Frameworks Any given library project can be configured so that the resulting library file is placed in a \l{http://developer.apple.com/documentation/MacOSX/Conceptual/BPFrameworks/Concepts/WhatAreFrameworks.html} {framework}, ready for deployment. To do this, set up the project to use the \l{qmake Variable Reference#TEMPLATE}{\c lib template} and add the \c lib_bundle option to the \l{qmake Variable Reference#CONFIG}{CONFIG} variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 16 The data associated with the library is specified using the \l{qmake Variable Reference#QMAKE_BUNDLE_DATA}{QMAKE_BUNDLE_DATA} variable. This holds items that will be installed with a library bundle, and is often used to specify a collection of header files, as in the following example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 17 Here, the \c FRAMEWORK_HEADERS variable is a user-defined variable that is used to define the headers required to use a particular framework. Appending it to the \c QMAKE_BUNDLE_DATA variable ensures that the information about these headers are added to the collection of resources that will be installed with the library bundle. Also, the framework's name and version are specified by \l{qmake Variable Reference#QMAKE_FRAMEWORK_BUNDLE_NAME} {QMAKE_FRAMEWORK_BUNDLE_NAME} and \l{qmake Variable Reference#QMAKE_FRAMEWORK_VERSION} {QMAKE_FRAMEWORK_VERSION} variables. By default, the values used for these are obtained from the \l{qmake Variable Reference#TARGET}{TARGET} and \l{qmake Variable Reference#VERSION}{VERSION} variables. See \l{Deploying an Application on Mac OS X} for more information about deploying applications and libraries. \section2 Creating Universal Binaries To create a universal binary for your application, you need to be using a version of Qt that has been configured with the \c{-universal} option. The architectures to be supported in the binary are specified with the \l{qmake Variable Reference#CONFIG}{CONFIG} variable. For example, the following assignment causes \c qmake to generate build rules to create a universal binary for both PowerPC and x86 architectures: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 18 Additionally, developers using a PowerPC-based platform need to set the \l{qmake Variable Reference#QMAKE_MAC_SDK}{QMAKE_MAC_SDK} variable. This process is discussed in more detail in the \l{Deploying an Application on Mac OS X#Architecture Dependencies}{deployment guide for Mac OS X}. \section2 Creating and Moving Xcode Projects Developers on Mac OS X can take advantage of \c{qmake}'s support for Xcode project files, as described in \l{Qt is Mac OS X Native#Development Tools}{Qt is Mac OS X Native}, by running \c qmake to generate an Xcode project from an existing \c qmake project files. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 19 Note that, if a project is later moved on the disk, \c qmake must be run again to process the project file and create a new Xcode project file. \section2 On supporting two build targets simultaneously Implementing this is currently not feasible, because the XCode concept of Active Build Configurations is conceptually different from the qmake idea of build targets. The XCode Active Build Configurations settings are for modifying xcode configurations, compiler flags and similar build options. Unlike Visual Studio, XCode does not allow for the selection of specific library files based on whether debug or release build configurations are selected. The qmake debug and release settings control which library files are linked to the executable. It is currently not possible to set files in XCode configuration settings from the qmake generated xcode project file. The way the libraries are linked in the "Frameworks & Libraries" phase in the XCode build system. Furthermore, the selected "Active Build Configuration" is stored in a .pbxuser file, which is generated by xcode on first load, not created by qmake. \section1 Windows Features specific to this platform include support for creating Visual Studio project files and handling manifest files when deploying Qt applications developed using Visual Studio 2005. \section2 Creating Visual Studio Project Files Developers using Visual Studio to write Qt applications can use the Visual Studio integration facilities provided with the \l{Qt Commercial Editions} and do not need to worry about how project dependencies are managed. However, some developers may need to import an existing \c qmake project into Visual Studio. \c qmake is able to take a project file and create a Visual Studio project that contains all the necessary information required by the development environment. This is achieved by setting the \c qmake \l{qmake Variable Reference#TEMPLATE}{project template} to either \c vcapp (for application projects) or \c vclib (for library projects). This can also be set using a command line option, for example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 20 It is possible to recursively generate \c{.vcproj} files in subdirectories and a \c{.sln} file in the main directory, by typing: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 21 Each time you update the project file, you need to run \c qmake to generate an updated Visual Studio project. \note If you are using the Visual Studio Add-in, you can import \c .pro files via the \gui{Qt->Import from .pro file} menu item. \section2 Visual Studio 2005 Manifest Files When deploying Qt applications built using Visual Studio 2005, it is necessary to ensure that the manifest file, created when the application was linked, is handled correctly. This is handled automatically for projects that generate DLLs. Removing manifest embedding for application executables can be done with the following assignment to the \l{qmake Variable Reference#CONFIG} {CONFIG} variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 22 Also, the manifest embedding for DLLs can be removed with the following assignment to the \l{qmake Variable Reference#CONFIG}{CONFIG} variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 23 This is discussed in more detail in the \l{Deploying an Application on Windows#Visual Studio 2005 Onwards} {deployment guide for Windows}. \section1 Symbian platform Features specific to this platform include handling of static data, capabilities, stack and heap size, compiler specific options, and unique identifiers for the application or library. \section2 Handling of static data If the application uses any static data, the build system needs to be informed about it. This is because Symbian tries to save memory if no static data is in use. To specify that static data support is desired, add this to the project file: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 129 The default value is zero. \section2 Stack and heap size The Symbian platform uses predefined sizes for stacks and heaps. If an application exceeds either limit, it may crash or fail to complete its task. Crashes that seem to have no reason can often be traced back to insufficient stack and/or heap sizes. The stack size has a maximum value, whereas the heap size has a minimum and a maximum value, all specified in bytes. The minimum value prevents the application from starting if that amount of memory is not available. The minimum and maximum values are separated by a space. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 130 The default values depend on the version of the Symbian SDK you're using. \section2 Compiler specific options General compiler options can as usual be set using \c QMAKE_CFLAGS and \c QMAKE_CXXFLAGS. In order to set specific compiler options, \c QMAKE_CFLAGS. and \c QMAKE_CXXFLAGS. can be used. \c can be either \c CW for the WINSCW architecture (emulator), or \c ARMCC for the ARMv5 architecture (hardware), or \c GCCE for the ARMv5 architecture (hardware). Here is an example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 131 \section2 Unique identifiers Symbian applications may have unique identifiers attached to them. Here is how to define them in a project file: There are four types of IDs supported: \c UID2, \c UID3, \c SID, and \c VID. They are specified like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 132 If \c UID2 is not specified, it defaults to the same value as \c UID3. If \c UID3 is not specified, qmake will automatically generate a \c UID3 suitable for development and debugging. This value should be manually specified for applications that are to be released. In order to obtain an official UID, please contact Nokia. Both \c SID and \c VID default to empty values. For more information about unique identifiers and their meaning for Symbian applications, please refer to the Symbian SDK documentation. \section2 Capabilities Capabilities define extra priviledges for the application, such as the ability to list all files on the file system. Capabilities are defined in the project file like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 133 It is also possible to specify which capabilities \e not to have, by first specifying \c ALL and then list the unwanted capabilities with a minus in front of them, like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 134 For more information about capabilities, please refer to the Symbian SDK documentation. */ /*! \page qmake-reference.html \title qmake Reference \contentspage {qmake Manual}{Contents} \previouspage Using Precompiled Headers \nextpage qmake Variable Reference This reference is a detailed index of all the variables and function that are available for use in \c qmake project files. \section1 Variable Reference The \l{qmake Variable Reference} describes the variables that are recognized by \c qmake when configuring the build process for projects. \section1 Function Reference The \l{qmake Function Reference} describes the function that can be used to process the contents of variables defined in project files. \target FrequentlyUsedVariables \section1 Frequently Used Variables The following variables are frequently used in project files to describe common aspects of the build process. These are fully described in the \l{qmake-variable-reference.html}{Variable Reference}. \list \o \l{qmake Variable Reference#CONFIG}{CONFIG} \o \l{qmake Variable Reference#DEF_FILE}{DEF_FILE} \o \l{qmake Variable Reference#DEFINES}{DEFINES} \o \l{qmake Variable Reference#DESTDIR}{DESTDIR} \o \l{qmake Variable Reference#DISTFILES}{DISTFILES} \o \l{qmake Variable Reference#DLLDESTDIR}{DLLDESTDIR} \o \l{qmake Variable Reference#FORMS}{FORMS} \o \l{qmake Variable Reference#FORMS3}{FORMS3} \o \l{qmake Variable Reference#GUID}{GUID} \o \l{qmake Variable Reference#HEADERS}{HEADERS} \o \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH} \o \l{qmake Variable Reference#LEXSOURCES}{LEXSOURCES} \o \l{qmake Variable Reference#LIBS}{LIBS} \o \l{qmake Variable Reference#MOC_DIR}{MOC_DIR} \o \l{qmake Variable Reference#OBJECTS_DIR}{OBJECTS_DIR} \o \l{qmake Variable Reference#QT}{QT} \o \l{qmake Variable Reference#RCC_DIR}{RCC_DIR} \o \l{qmake Variable Reference#REQUIRES}{REQUIRES} \o \l{qmake Variable Reference#RESOURCES}{RESOURCES} \o \l{qmake Variable Reference#SOURCES}{SOURCES} \o \l{qmake Variable Reference#SUBDIRS}{SUBDIRS} \o \l{qmake Variable Reference#TARGET}{TARGET} \o \l{qmake Variable Reference#TEMPLATE}{TEMPLATE} \o \l{qmake Variable Reference#TRANSLATIONS}{TRANSLATIONS} \o \l{qmake Variable Reference#UI_DIR}{UI_DIR} \o \l{qmake Variable Reference#UI_HEADERS_DIR}{UI_HEADERS_DIR} \o \l{qmake Variable Reference#UI_SOURCES_DIR}{UI_SOURCES_DIR} \o \l{qmake Variable Reference#VERSION}{VERSION} \o \l{qmake Variable Reference#YACCSOURCES}{YACCSOURCES} \endlist \section1 Environment Variables and Configuration The \l{Configuring qmake's Environment} chapter of this manual describes the environment variables that \c qmake uses when configuring the build process. */ /*! \page qmake-variable-reference.html \title qmake Variable Reference \contentspage {qmake Manual}{Contents} \previouspage qmake Reference \nextpage qmake Function Reference \c{qmake}'s fundamental behavior is influenced by variable declarations that define the build process of each project. Some of these declare resources, such as headers and source files, that are common to each platform; others are used to customize the behavior of compilers and linkers on specific platforms. Platform-specific variables follow the naming pattern of the variables which they extend or modify, but include the name of the relevant platform in their name. For example, \c QMAKE_LIBS can be used to specify a list of libraries that a project needs to link against, and \c QMAKE_LIBS_X11 can be used to extend or override this list. \tableofcontents{3} \target BLD_INF_RULES \section1 BLD_INF_RULES \e {This is only used on the Symbian platform.} Generic \c bld.inf file content can be specified with \c BLD_INF_RULES variables. The section of \c bld.inf file where each rule goes is appended to \c BLD_INF_RULES with a dot. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 146 This will add the specified statements to the \c prj_exports section of the generated \c bld.inf file. It is also possible to add multiple rows in a single block. Each double quoted string will be placed on a new row in the generated \c bld.inf file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 143 Any rules you define will be added after automatically generated rules in each section. \target CONFIG \section1 CONFIG The \c CONFIG variable specifies project configuration and compiler options. The values will be recognized internally by \c qmake and have special meaning. They are as follows. These \c CONFIG values control compilation flags: \table 95% \header \o Option \o Description \row \o release \o The project is to be built in release mode. This is ignored if \c debug is also specified. \row \o debug \o The project is to be built in debug mode. \row \o debug_and_release \o The project is built in \e both debug and release modes. This can have some unexpected side effects (see below for more information). \row \o build_all \o If \c debug_and_release is specified, the project is built in both debug and release modes by default. \row \o ordered \o When using the \c subdirs template, this option specifies that the directories listed should be processed in the order in which they are given. \row \o precompile_header \o Enables support for the use of \l{Using Precompiled Headers}{precompiled headers} in projects. \row \o warn_on \o The compiler should output as many warnings as possible. This is ignored if \c warn_off is specified. \row \o warn_off \o The compiler should output as few warnings as possible. \omit \row \o qt_debug \o Specifies that the project should be built against debug versions of the Qt libraries specified using the \l{#QT}{QT} variable. \row \o qt_release \o Specifies that the project should be built against release versions of the Qt libraries specified using the \l{#QT}{QT} variable. \endomit \endtable Since the \c debug option overrides the \c release option when both are defined in the \c CONFIG variable, it is necessary to use the \c debug_and_release option if you want to allow both debug and release versions of a project to be built. In such a case, the Makefile that \c qmake generates includes a rule that builds both versions, and this can be invoked in the following way: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 24 When linking a library, \c qmake relies on the underlying platform to know what other libraries this library links against. However, if linking statically, \c qmake will not get this information unless we use the following \c CONFIG options: \table 95% \header \o Option \o Description \row \o create_prl \o This option enables \c qmake to track these dependencies. When this option is enabled, \c qmake will create a file ending in \c .prl which will save meta-information about the library (see \l{LibDepend}{Library Dependencies} for more info). \row \o link_prl \o When this is enabled, \c qmake will process all libraries linked to by the application and find their meta-information (see \l{LibDepend}{Library Dependencies} for more info). \endtable Please note that \c create_prl is required when \e {building} a static library, while \c link_prl is required when \e {using} a static library. On Windows (or if Qt is configured with \c{-debug_and_release}, adding the \c build_all option to the \c CONFIG variable makes this rule the default when building the project, and installation targets will be created for both debug and release builds. Additionally, adding \c debug_and_release to the \c CONFIG variable will cause both \c debug and \c release to be defined in the contents of \c CONFIG. When the project file is processed, the \l{qmake Advanced Usage#Scopes}{scopes} that test for each value will be processed for \e both debug and release modes. The \c{build_pass} variable will be set for each of these mode, and you can test for this to perform build-specific tasks. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 25 As a result, it may be useful to define mode-specific variables, such as \l{#QMAKE_LFLAGS_RELEASE}{QMAKE_LFLAGS_RELEASE}, instead of general variables, such as \l{#QMAKE_LFLAGS}{QMAKE_LFLAGS}, where possible. The following options define the application/library type: \table 95% \header \o Option \o Description \row \o qt \o The target is a Qt application/library and requires the Qt library and header files. The proper include and library paths for the Qt library will automatically be added to the project. This is defined by default, and can be fine-tuned with the \c{\l{#qt}{QT}} variable. \row \o thread \o The target is a multi-threaded application or library. The proper defines and compiler flags will automatically be added to the project. \row \o x11 \o The target is a X11 application or library. The proper include paths and libraries will automatically be added to the project. \row \o windows \o The target is a Win32 window application (app only). The proper include paths, compiler flags and libraries will automatically be added to the project. \row \o console \o The target is a Win32 console application (app only). The proper include paths, compiler flags and libraries will automatically be added to the project. \row \o shared \o{1,3} The target is a shared object/DLL. The proper include paths, compiler flags and libraries will automatically be added to the project. \row \o dll \o \row \o dylib \o \row \o static \o{1,2} The target is a static library (lib only). The proper compiler flags will automatically be added to the project. \row \o staticlib \o \row \o plugin \o The target is a plugin (lib only). This enables dll as well. \row \o designer \o The target is a plugin for \QD. \row \o uic3 \o Configures qmake to run uic3 on the content of \c FORMS3 if defined; otherwise the contents of \c FORMS will be processed instead. \row \o no_lflags_merge \o Ensures that the list of libraries stored in the \c LIBS variable is not reduced to a list of unique values before it is used. \row \o resources \o Configures qmake to run rcc on the content of \c RESOURCES if defined. \endtable These options are used to set the compiler flags: \table 95% \header \o Option \o Description \row \o 3dnow \o AMD 3DNow! instruction support is enabled. \row \o exceptions \o Exception support is enabled. \row \o mmx \o Intel MMX instruction support is enabled. \row \o rtti \o RTTI support is enabled. \row \o stl \o STL support is enabled. \row \o sse \o SSE support is enabled. \row \o sse2 \o SSE2 support is enabled. \endtable These options define specific features on Windows only: \table 95% \header \o Option \o Description \row \o flat \o When using the vcapp template this will put all the source files into the source group and the header files into the header group regardless of what directory they reside in. Turning this option off will group the files within the source/header group depending on the directory they reside. This is turned on by default. \row \o embed_manifest_dll \o Embeds a manifest file in the DLL created as part of a library project. \row \o embed_manifest_exe \o Embeds a manifest file in the DLL created as part of an application project. \row \o incremental \o Used to enable or disable incremental linking in Visual C++, depending on whether this feature is enabled or disabled by default. \endtable See \l{qmake Platform Notes#Visual Studio 2005 Manifest Files}{qmake Platform Notes} for more information on the options for embedding manifest files. These options only have an effect on Mac OS X: \table 95% \header \o Option \o Description \row \o ppc \o Builds a PowerPC binary. \row \o x86 \o Builds an i386 compatible binary. \row \o app_bundle \o Puts the executable into a bundle (this is the default). \row \o lib_bundle \o Puts the library into a library bundle. \endtable The build process for bundles is also influenced by the contents of the \l{#QMAKE_BUNDLE_DATA}{QMAKE_BUNDLE_DATA} variable. These options only have an effect on the Symbian platform: \table 95% \header \o Option \o Description \row \o stdbinary \o Builds an Open C binary (i.e. STDDLL, STDEXE, or STDLIB, depending on the target binary type.) \row \o no_icon \o Doesn't generate resources needed for displaying an icon for executable in application menu (app only). \row \o symbian_test \o Places mmp files and extension makefiles under test sections in generated bld.inf instead of their regular sections. Note that this only affects automatically generated bld.inf content; the content added via \c BLD_INF_RULES variable is not affected. \endtable These options have an effect on Linux/Unix platforms: \table 95% \header \o Option \o Description \row \o largefile \o Includes support for large files. \row \o separate_debug_info \o Puts debugging information for libraries in separate files. \endtable The \c CONFIG variable will also be checked when resolving scopes. You may assign anything to this variable. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 26 \target DEFINES \section1 DEFINES \c qmake adds the values of this variable as compiler C preprocessor macros (-D option). For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 27 \target DEF_FILE \section1 DEF_FILE \e {This is only used on Windows when using the \c app template}. Specifies a \c .def file to be included in the project. \target DEPENDPATH \section1 DEPENDPATH This variable contains the list of all directories to look in to resolve dependencies. This will be used when crawling through \c included files. \target DEPLOYMENT \section1 DEPLOYMENT \e {This is only used on Windows CE and the Symbian platform.} Specifies which additional files will be deployed. Deployment means the transfer of files from the development system to the target device or emulator. Files can be deployed by either creating a Visual Studio project or using the \l {Using QTestLib remotely on Windows CE}{cetest} executable. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 28 This will upload all PNG images in \c path to the same directory your build target will be deployed to. The default deployment target path for Windows CE is \c{%CSIDL_PROGRAM_FILES%\target}, which usually gets expanded to \c{\Program Files\target}. For the Symbian platform, the default target is the application private directory on the drive it is installed to. It is also possible to specify multiple \c sources to be deployed on target \c paths. In addition, different variables can be used for deployment to different directories. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 29 \note In Windows CE all linked Qt libraries will be deployed to the path specified by \c{myFiles.path}. On Symbian platform all libraries and executables will always be deployed to the \\sys\\bin of the installation drive. Since the Symbian platform build system automatically moves binaries to certain directories under the epoc32 directory, custom plugins, executables or dynamically loadable libraries need special handling. When deploying extra executables or dynamically loadable libraries, the target path must specify \\sys\\bin. For plugins, the target path must specify the location where the plugin stub will be deployed to (see the \l{How to Create Qt Plugins} document for more information about plugins). If the binary cannot be found from the indicated source path, the directory Symbian build process moves the executables to is searched, e.g. \\epoc32\\release\\armv5\\urel. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 128 On the Symbian platform, generic PKG file content can also be specified with this variable. You can use either \c pkg_prerules or \c pkg_postrules to pass raw data to PKG file. The strings in \c pkg_prerules are added before package-body and \c pkg_postrules after. The strings defined in \c pkg_postrules or \c pkg_prerules are not parsed by qmake, so they should be in a format understood by Symbian package generation tools. Please consult the Symbian platform documentation for correct syntax. For example, to deploy DLL and add a new dependency: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 140 Please note that \c pkg_prerules can also replace default statements in pkg file. If no pkg_prerules is defined, qmake makes sure that PKG file syntax is correct and it contains all mandatory statements such as: \list \o languages, for example \BR &EN,FR \o package-header, for example \BR #{"MyApp-EN", "MyApp-FR"}, (0x1000001F), 1, 2, 3, TYPE=SA \o localized and unique vendor, for example \BR %{"Vendor-EN", ..., "Vendor-FR"} :"Unique vendor name" \endlist If you decide to override any of these statements, you need to pay attention that also other statements stay valid. For example if you override languages statement, you must override also package-header statement and all other statements which are language specific. On the Symbian platform, the \c default_deployment item specifies default platform and package dependencies. Those dependencies can be selectively disabled if alternative dependencies need to be defined - e.g. if a specific device is required to run the application or more languages need to be supported by the package file. The supported \c default_deployment rules that can be disabled are: \list \o pkg_depends_qt \o pkg_depends_webkit \o pkg_platform_dependencies \endlist For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 141 On the Symbian platform, you can use \c{DEPLOYMENT.installer_header} variable to generate smart installer wrapper for your application. If you specify just UID of the installer package as the value, then installer package name and version will be autogenerated: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 146 If autogenerated values are not suitable, you can also specify the sis header yourself using this variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 147 \target DEPLOYMENT_PLUGIN \section1 DEPLOYMENT_PLUGIN \e {This is only used on Windows CE and the Symbian platform.} This variable specifies the Qt plugins that will be deployed. All plugins available in Qt can be explicitly deployed to the device. See \l{Static Plugins}{Static Plugins} for a complete list. \note In Windows CE, No plugins will be deployed automatically. If the application depends on plugins, these plugins have to be specified manually. \note On the Symbian platform, all plugins supported by this variable will be deployed by default with Qt libraries, so generally using this variable is not needed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 142 This will upload the jpeg imageformat plugin to the plugins directory on the Windows CE device. \target DESTDIR \section1 DESTDIR Specifies where to put the \l{#TARGET}{target} file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 30 \target DESTDIR_TARGET \section1 DESTDIR_TARGET This variable is set internally by \c qmake, which is basically the \c DESTDIR variable with the \c TARGET variable appened at the end. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target DLLDESTDIR \section1 DLLDESTDIR Specifies where to copy the \l{#TARGET}{target} dll. \target DISTFILES \section1 DISTFILES This variable contains a list of files to be included in the dist target. This feature is supported by UnixMake specs only. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 31 \target DSP_TEMPLATE \section1 DSP_TEMPLATE This variable is set internally by \c qmake, which specifies where the dsp template file for basing generated dsp files is stored. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target FORMS \section1 FORMS This variable specifies the UI files (see \link designer-manual.html Qt Designer \endlink) to be processed through \c uic before compiling. All dependencies, headers and source files required to build these UI files will automatically be added to the project. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 32 If FORMS3 is defined in your project, then this variable must contain forms for uic, and not uic3. If CONFIG contains uic3, and FORMS3 is not defined, the this variable must contain only uic3 type forms. \target FORMS3 \section1 FORMS3 This variable specifies the old style UI files to be processed through \c uic3 before compiling, when \c CONFIG contains uic3. All dependencies, headers and source files required to build these UI files will automatically be added to the project. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 33 \target GUID \section1 GUID Specifies the GUID that is set inside a \c{.vcproj} file. The GUID is usually randomly determined. However, should you require a fixed GUID, it can be set using this variable. This variable is specific to \c{.vcproj} files only; it is ignored otherwise. \target HEADERS \section1 HEADERS Defines the header files for the project. \c qmake will generate dependency information (unless \c -nodepend is specified on the \l{Running qmake#Commands}{command line}) for the specified headers. \c qmake will also automatically detect if \c moc is required by the classes in these headers, and add the appropriate dependencies and files to the project for generating and linking the moc files. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 34 See also \l{#SOURCES}{SOURCES}. \target ICON \section1 ICON This variable is used only in MAC and the Symbian platform to set the application icon. Please see \l{Setting the Application Icon}{the application icon documentation} for more information. \target INCLUDEPATH \section1 INCLUDEPATH This variable specifies the #include directories which should be searched when compiling the project. Use ';' or a space as the directory separator. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 35 To specify a path containing spaces, quote the path using the technique mentioned in the \l{qmake Project Files#Whitespace}{qmake Project Files} document. For example, paths with spaces can be specified on Windows and Unix platforms by using the \l{qmake Function Reference#quote-string}{quote()} function in the following way: \snippet doc/src/snippets/qmake/spaces.pro quoting include paths with spaces \target INSTALLS \section1 INSTALLS This variable contains a list of resources that will be installed when \c{make install} or a similar installation procedure is executed. Each item in the list is typically defined with attributes that provide information about where it will be installed. For example, the following \c{target.path} definition describes where the build target will be installed, and the \c INSTALLS assignment adds the build target to the list of existing resources to be installed: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 36 \target LEXIMPLS \section1 LEXIMPLS This variable contains a list of lex implementation files. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target LEXOBJECTS \section1 LEXOBJECTS This variable contains the names of intermediate lex object files.The value of this variable is typically handled by \c qmake and rarely needs to be modified. \target LEXSOURCES \section1 LEXSOURCES This variable contains a list of lex source files. All dependencies, headers and source files will automatically be added to the project for building these lex files. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 37 \target LIBS \section1 LIBS This variable contains a list of libraries to be linked into the project. You can use the Unix \c -l (library) and -L (library path) flags and qmake will do the correct thing with these libraries on Windows and the Symbian platform (namely this means passing the full path of the library to the linker). The only limitation to this is the library must exist, for qmake to find which directory a \c -l lib lives in. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 38 To specify a path containing spaces, quote the path using the technique mentioned in the \l{qmake Project Files#Whitespace}{qmake Project Files} document. For example, paths with spaces can be specified on Windows and Unix platforms by using the \l{qmake Function Reference#quote-string}{quote()} function in the following way: \snippet doc/src/snippets/qmake/spaces.pro quoting library paths with spaces \bold{Note:} On Windows, specifying libraries with the \c{-l} option, as in the above example, will cause the library with the highest version number to be used; for example, \c{libmath2.lib} could potentially be used instead of \c{libmathlib}. To avoid this ambiguity, we recommend that you explicitly specify the library to be used by including the \c{.lib} file name suffix. \bold{Note:} On the Symbian platform, the build system makes a distinction between shared and static libraries. In most cases, qmake will figure out which library you are refering to, but in some cases you may have to specify it explicitly to get the expected behavior. This typically happens if you are building a library and using it in the same project. To specify that the library is either shared or static, add a ".dll" or ".lib" suffix, respectively, to the library name. By default, the list of libraries stored in \c LIBS is reduced to a list of unique names before it is used. To change this behavior, add the \c no_lflags_merge option to the \c CONFIG variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 39 \target LITERAL_HASH \section1 LITERAL_HASH This variable is used whenever a literal hash character (\c{#}) is needed in a variable declaration, perhaps as part of a file name or in a string passed to some external application. For example: \snippet doc/src/snippets/qmake/comments.pro 1 By using \c LITERAL_HASH in this way, the \c # character can be used to construct a URL for the \c message() function to print to the console. \target MAKEFILE \section1 MAKEFILE This variable specifies the name of the Makefile which \c qmake should use when outputting the dependency information for building a project. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target MAKEFILE_GENERATOR \section1 MAKEFILE_GENERATOR This variable contains the name of the Makefile generator to use when generating a Makefile. The value of this variable is typically handled internally by \c qmake and rarely needs to be modified. \target MMP_RULES \section1 MMP_RULES \e {This is only used on the Symbian platform.} Generic MMP file content can be specified with this variable. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 137 This will add the specified statement to the end of the generated MMP file. It is also possible to add multiple rows in a single block. Each double quoted string will be placed on a new row in the generated MMP file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 138 If you need to include a hash (\c{#}) character inside the \c MMP_RULES statement, it can be done with the variable \c LITERAL_HASH as follows: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 139 There is also a convenience function for adding conditional rules called \c{addMMPRules}. Suppose you need certain functionality to require different library depending on architecture. This can be specified with \c{addMMPRules} as follows: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 148 \note You should not use this variable to add MMP statements that are explicitly supported by their own variables, such as \c TARGET.EPOCSTACKSIZE. Doing so could result in duplicate statements in the MMP file. \target MOC_DIR \section1 MOC_DIR This variable specifies the directory where all intermediate moc files should be placed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 40 \target OBJECTS \section1 OBJECTS This variable is generated from the \link #SOURCES SOURCES \endlink variable. The extension of each source file will have been replaced by .o (Unix) or .obj (Win32). The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target OBJECTS_DIR \section1 OBJECTS_DIR This variable specifies the directory where all intermediate objects should be placed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 41 \target OBJMOC \section1 OBJMOC This variable is set by \c qmake if files can be found that contain the Q_OBJECT macro. \c OBJMOC contains the name of all intermediate moc object files. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target POST_TARGETDEPS \section1 POST_TARGETDEPS All libraries that the \l{#TARGET}{target} depends on can be listed in this variable. Some backends do not support this, these include MSVC Dsp, and ProjectBuilder .pbproj files. Generally this is supported internally by these build tools, this is useful for explicitly listing dependant static libraries. This list will go after all builtin (and \link #PRE_TARGETDEPS $$PRE_TARGETDEPS \endlink) dependencies. \target PRE_TARGETDEPS \section1 PRE_TARGETDEPS All libraries that the \l{#TARGET}{target} depends on can be listed in this variable. Some backends do not support this, these include MSVC Dsp, and ProjectBuilder .pbproj files. Generally this is supported internally by these build tools, this is useful for explicitly listing dependant static libraries. This list will go before all builtin dependencies. \target PRECOMPILED_HEADER \section1 PRECOMPILED_HEADER This variable indicates the header file for creating a precompiled header file, to increase the compilation speed of a project. Precompiled headers are currently only supported on some platforms (Windows - all MSVC project types, Mac OS X - Xcode, Makefile, Unix - gcc 3.3 and up). On other platforms, this variable has different meaning, as noted below. This variable contains a list of header files that require some sort of pre-compilation step (such as with moc). The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target PWD \section1 PWD This variable contains the full path leading to the directory where the \c qmake project file (project.pro) is located. \target OUT_PWD \section1 OUT_PWD This variable contains the full path leading to the directory where \c qmake places the generated Makefile. \target QMAKE_systemvariable \section1 QMAKE This variable contains the name of the \c qmake program itself and is placed in generated Makefiles. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKESPEC_systemvariable \section1 QMAKESPEC This variable contains the name of the \c qmake configuration to use when generating Makefiles. The value of this variable is typically handled by \c qmake and rarely needs to be modified. Use the \c{QMAKESPEC} environment variable to override the \c qmake configuration. Note that, due to the way \c qmake reads project files, setting the \c{QMAKESPEC} environment variable from within a project file will have no effect. \target QMAKE_APP_FLAG \section1 QMAKE_APP_FLAG This variable is empty unless the \c app \l{#TEMPLATE}{TEMPLATE} is specified. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. Use the following instead: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 42 \target QMAKE_APP_OR_DLL \section1 QMAKE_APP_OR_DLL This variable is empty unless the \c app or \c dll \l{#TEMPLATE}{TEMPLATE} is specified. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_AR_CMD \section1 QMAKE_AR_CMD \e {This is used on Unix platforms only.} This variable contains the command for invoking the program which creates, modifies and extracts archives. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_BUNDLE_DATA \section1 QMAKE_BUNDLE_DATA This variable is used to hold the data that will be installed with a library bundle, and is often used to specify a collection of header files. For example, the following lines add \c path/to/header_one.h and \c path/to/header_two.h to a group containing information about the headers supplied with the framework: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 43 The last line adds the information about the headers to the collection of resources that will be installed with the library bundle. Library bundles are created when the \c lib_bundle option is added to the \l{#CONFIG}{CONFIG} variable. See \l{qmake Platform Notes#Creating Frameworks}{qmake Platform Notes} for more information about creating library bundles. \e{This is used on Mac OS X only.} \section1 QMAKE_BUNDLE_EXTENSION This variable defines the extension to be used for library bundles. This allows frameworks to be created with custom extensions instead of the standard \c{.framework} directory name extension. For example, the following definition will result in a framework with the \c{.myframework} extension: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 44 \e{This is used on Mac OS X only.} \section1 QMAKE_CC This variable specifies the C compiler that will be used when building projects containing C source code. Only the file name of the compiler executable needs to be specified as long as it is on a path contained in the \c PATH variable when the Makefile is processed. \target QMAKE_CFLAGS_DEBUG \section1 QMAKE_CFLAGS_DEBUG This variable contains the flags for the C compiler in debug mode.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_MT \section1 QMAKE_CFLAGS_MT This variable contains the compiler flags for creating a multi-threaded application or when the version of Qt that you link against is a multi-threaded statically linked library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_MT_DBG \section1 QMAKE_CFLAGS_MT_DBG This variable contains the compiler flags for creating a debuggable multi-threaded application or when the version of Qt that you link against is a debuggable multi-threaded statically linked library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_MT_DLL \section1 QMAKE_CFLAGS_MT_DLL \e {This is used on Windows only.} This variable contains the compiler flags for creating a multi-threaded dll or when the version of Qt that you link against is a multi-threaded dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_MT_DLLDBG \section1 QMAKE_CFLAGS_MT_DLLDBG \e {This is used on Windows only.} This variable contains the compiler flags for creating a debuggable multi-threaded dll or when the version of Qt that you link against is a debuggable multi-threaded statically linked library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_RELEASE \section1 QMAKE_CFLAGS_RELEASE This variable contains the compiler flags for creating a non-debuggable application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_SHLIB \section1 QMAKE_CFLAGS_SHLIB \e {This is used on Unix platforms only.} This variable contains the compiler flags for creating a shared library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_THREAD \section1 QMAKE_CFLAGS_THREAD This variable contains the compiler flags for creating a multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_WARN_OFF \section1 QMAKE_CFLAGS_WARN_OFF This variable is not empty if the warn_off \l{#TEMPLATE}{TEMPLATE} option is specified. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CFLAGS_WARN_ON \section1 QMAKE_CFLAGS_WARN_ON This variable is not empty if the warn_on \l{#TEMPLATE}{TEMPLATE} option is specified. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CLEAN \section1 QMAKE_CLEAN This variable contains any files which are not generated files (such as moc and uic generated files) and object files that should be removed when using "make clean". \section1 QMAKE_CXX This variable specifies the C++ compiler that will be used when building projects containing C++ source code. Only the file name of the compiler executable needs to be specified as long as it is on a path contained in the \c PATH variable when the Makefile is processed. \section1 QMAKE_CXXFLAGS This variable contains the C++ compiler flags that are used when building a project. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. The flags specific to debug and release modes can be adjusted by modifying the \c QMAKE_CXXFLAGS_DEBUG and \c QMAKE_CXXFLAGS_RELEASE variables, respectively. \bold{Note:} On the Symbian platform, this variable can be used to pass architecture specific options to each compiler in the Symbian build system. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 131 For more information, see \l{qmake Platform Notes#Compiler specific options}{qmake Platform Notes}. \target QMAKE_CXXFLAGS_DEBUG \section1 QMAKE_CXXFLAGS_DEBUG This variable contains the C++ compiler flags for creating a debuggable application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_MT \section1 QMAKE_CXXFLAGS_MT This variable contains the C++ compiler flags for creating a multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_MT_DBG \section1 QMAKE_CXXFLAGS_MT_DBG This variable contains the C++ compiler flags for creating a debuggable multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_MT_DLL \section1 QMAKE_CXXFLAGS_MT_DLL \c {This is used on Windows only.} This variable contains the C++ compiler flags for creating a multi-threaded dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_MT_DLLDBG \section1 QMAKE_CXXFLAGS_MT_DLLDBG \c {This is used on Windows only.} This variable contains the C++ compiler flags for creating a multi-threaded debuggable dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_RELEASE \section1 QMAKE_CXXFLAGS_RELEASE This variable contains the C++ compiler flags for creating an application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_SHLIB \section1 QMAKE_CXXFLAGS_SHLIB This variable contains the C++ compiler flags for creating a shared library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_THREAD \section1 QMAKE_CXXFLAGS_THREAD This variable contains the C++ compiler flags for creating a multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_WARN_OFF \section1 QMAKE_CXXFLAGS_WARN_OFF This variable contains the C++ compiler flags for suppressing compiler warnings. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_CXXFLAGS_WARN_ON \section1 QMAKE_CXXFLAGS_WARN_ON This variable contains C++ compiler flags for generating compiler warnings. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_DISTCLEAN \section1 QMAKE_DISTCLEAN This variable removes extra files upon the invocation of \c{make distclean}. \target QMAKE_EXTENSION_SHLIB \section1 QMAKE_EXTENSION_SHLIB This variable contains the extention for shared libraries. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. Note that platform-specific variables that change the extension will override the contents of this variable. \section1 QMAKE_EXT_MOC This variable changes the extention used on included moc files. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}. \section1 QMAKE_EXT_UI This variable changes the extention used on /e Designer UI files. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}. \section1 QMAKE_EXT_PRL This variable changes the extention used on created PRL files. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}, \l{Configuring qmake's Environment#libdepend}{Library Dependencies}. \section1 QMAKE_EXT_LEX This variable changes the extention used on files given to lex. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}, \l{#LEXSOURCES}{LEXSOURCES}. \section1 QMAKE_EXT_YACC This variable changes the extention used on files given to yacc. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}, \l{#YACCSOURCES}{YACCSOURCES}. \section1 QMAKE_EXT_OBJ This variable changes the extention used on generated object files. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}. \section1 QMAKE_EXT_CPP This variable changes the interpretation of all suffixes in this list of values as files of type C++ source code. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}. \section1 QMAKE_EXT_H This variable changes the interpretation of all suffixes in this list of values as files of type C header files. See also \l{Configuring qmake's Environment#Extensions}{File Extensions}. \section1 QMAKE_EXTRA_COMPILERS This variable contains the extra compilers/preprocessors that have been added See also \l{Configuring qmake's Environment#Customizing}{Customizing Makefile Output} \section1 QMAKE_EXTRA_TARGETS This variable contains the extra targets that have been added See also \l{Configuring qmake's Environment#Customizing}{Customizing Makefile Output} \target QMAKE_FAILED_REQUIREMENTS \section1 QMAKE_FAILED_REQUIREMENTS This variable contains the list of requirements that were failed to be met when \c qmake was used. For example, the sql module is needed and wasn't compiled into Qt. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_FILETAGS \section1 QMAKE_FILETAGS This variable contains the file tags needed to be entered into the Makefile, such as SOURCES and HEADERS. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_FRAMEWORK_BUNDLE_NAME In a framework project, this variable contains the name to be used for the framework that is built. By default, this variable contains the same value as the \l{#TARGET}{TARGET} variable. See \l{qmake Platform Notes#Creating Frameworks}{qmake Platform Notes} for more information about creating frameworks and library bundles. \e{This is used on Mac OS X only.} \target QMAKE_FRAMEWORK_VERSION \section1 QMAKE_FRAMEWORK_VERSION For projects where the build target is a Mac OS X framework, this variable is used to specify the version number that will be applied to the framework that is built. By default, this variable contains the same value as the \l{#VERSION}{VERSION} variable. See \l{qmake Platform Notes#Creating Frameworks}{qmake Platform Notes} for more information about creating frameworks. \e{This is used on Mac OS X only.} \target QMAKE_INCDIR \section1 QMAKE_INCDIR This variable contains the location of all known header files to be added to INCLUDEPATH when building an application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_INCDIR_EGL \section1 QMAKE_INCDIR_EGL This variable contains the location of EGL header files to be added to INCLUDEPATH when building an application with OpenGL/ES or OpenVG support. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_INCDIR_OPENGL \section1 QMAKE_INCDIR_OPENGL This variable contains the location of OpenGL header files to be added to INCLUDEPATH when building an application with OpenGL support. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenGL implementation uses EGL (most OpenGL/ES systems), then QMAKE_INCDIR_EGL may also need to be set. \section1 QMAKE_INCDIR_OPENGL_ES1, QMAKE_INCDIR_OPENGL_ES1CL, QMAKE_INCDIR_OPENGL_ES2 These variables contain the location of OpenGL headers files to be added to INCLUDEPATH when building an application with OpenGL ES 1, OpenGL ES 1 Common Lite or OpenGL ES 2 support respectively. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenGL implementation uses EGL (most OpenGL/ES systems), then QMAKE_INCDIR_EGL may also need to be set. \target QMAKE_INCDIR_OPENVG \section1 QMAKE_INCDIR_OPENVG This variable contains the location of OpenVG header files to be added to INCLUDEPATH when building an application with OpenVG support. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenVG implementation uses EGL then QMAKE_INCDIR_EGL may also need to be set. \target QMAKE_INCDIR_QT \section1 QMAKE_INCDIR_QT This variable contains the location of all known header file paths to be added to INCLUDEPATH when building a Qt application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_INCDIR_THREAD \section1 QMAKE_INCDIR_THREAD This variable contains the location of all known header file paths to be added to INCLUDEPATH when building a multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_INCDIR_X11 \section1 QMAKE_INCDIR_X11 \e {This is used on Unix platforms only.} This variable contains the location of X11 header file paths to be added to INCLUDEPATH when building a X11 application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target QMAKE_INFO_PLIST \section1 QMAKE_INFO_PLIST \e {This is used on Mac OS X platforms only.} This variable contains the name of the property list file, \c{.plist}, you would like to include in your Mac OS X application bundle. In the \c{.plist} file, you can define some variables, e.g., @EXECUTABLE@, which qmake will replace with the actual executable name. Other variables include @ICON@, @TYPEINFO@, @LIBRARY@, and @SHORT_VERSION@. \note Most of the time, the default \c{Info.plist} is good enough. \section1 QMAKE_LFLAGS This variable contains a general set of flags that are passed to the linker. If you need to change the flags used for a particular platform or type of project, use one of the specialized variables for that purpose instead of this variable. \target QMAKE_LFLAGS_CONSOLE \section1 QMAKE_LFLAGS_CONSOLE \e {This is used on Windows only.} This variable contains link flags when building console programs. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_CONSOLE_DLL \e {This is used on Windows only.} This variable contains link flags when building console dlls. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_DEBUG This variable contains link flags when building debuggable applications. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_PLUGIN This variable contains link flags when building plugins. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_RPATH \e {This is used on Unix platforms only.} Library paths in this definition are added to the executable at link time so that the added paths will be preferentially searched at runtime. \section1 QMAKE_LFLAGS_QT_DLL This variable contains link flags when building programs that use the Qt library built as a dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_RELEASE This variable contains link flags when building applications for release. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_SHAPP This variable contains link flags when building applications which are using the \c app template. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_SHLIB This variable contains link flags when building shared libraries The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_SONAME This variable specifies the link flags to set the name of shared objects, such as .so or .dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_THREAD This variable contains link flags when building multi-threaded projects. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_WINDOWS \e {This is used on Windows only.} This variable contains link flags when building Windows GUI projects (i.e. non-console applications). The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LFLAGS_WINDOWS_DLL \e {This is used on Windows only.} This variable contains link flags when building Windows DLL projects. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBDIR This variable contains the location of all known library directories.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBDIR_FLAGS \e {This is used on Unix platforms only.} This variable contains the location of all library directory with -L prefixed. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBDIR_EGL This variable contains the location of the EGL library directory, when EGL is used with OpenGL/ES or OpenVG. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBDIR_OPENGL This variable contains the location of the OpenGL library directory.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenGL implementation uses EGL (most OpenGL/ES systems), then QMAKE_LIBDIR_EGL may also need to be set. \section1 QMAKE_LIBDIR_OPENVG This variable contains the location of the OpenVG library directory. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenVG implementation uses EGL, then QMAKE_LIBDIR_EGL may also need to be set. \section1 QMAKE_LIBDIR_QT This variable contains the location of the Qt library directory.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBDIR_X11 \e {This is used on Unix platforms only.} This variable contains the location of the X11 library directory.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS This variable contains all project libraries. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_CONSOLE \e {This Windows-specific variable is no longer used.} Prior to Qt 4.2, this variable was used to list the libraries that should be linked against when building a console application project on Windows. \l{#QMAKE_LIBS_WINDOW}{QMAKE_LIBS_WINDOW} should now be used instead. \section1 QMAKE_LIBS_EGL This variable contains all EGL libraries when building Qt with OpenGL/ES or OpenVG. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. The usual value is \c{-lEGL}. \section1 QMAKE_LIBS_OPENGL This variable contains all OpenGL libraries. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenGL implementation uses EGL (most OpenGL/ES systems), then QMAKE_LIBS_EGL may also need to be set. \section1 QMAKE_LIBS_OPENGL_QT This variable contains all OpenGL Qt libraries.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_OPENGL_ES1, QMAKE_LIBS_OPENGL_ES1CL, QMAKE_LIBS_OPENGL_ES2 These variables contain all the OpenGL libraries for OpenGL ES 1, OpenGL ES 1 Common Lite profile and OpenGL ES 2. The value of these variables is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. If the OpenGL implementation uses EGL (most OpenGL/ES systems), then QMAKE_LIBS_EGL may also need to be set. \section1 QMAKE_LIBS_OPENVG This variable contains all OpenVG libraries. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. The usual value is \c{-lOpenVG}. Some OpenVG engines are implemented on top of OpenGL. This will be detected at configure time and QMAKE_LIBS_OPENGL will be implicitly added to QMAKE_LIBS_OPENVG wherever the OpenVG libraries are linked. If the OpenVG implementation uses EGL, then QMAKE_LIBS_EGL may also need to be set. \section1 QMAKE_LIBS_QT This variable contains all Qt libraries.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_QT_DLL \e {This is used on Windows only.} This variable contains all Qt libraries when Qt is built as a dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_QT_OPENGL This variable contains all the libraries needed to link against if OpenGL support is turned on. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_QT_THREAD This variable contains all the libraries needed to link against if thread support is turned on. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_RT \e {This is used with Borland compilers only.} This variable contains the runtime library needed to link against when building an application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_RTMT \e {This is used with Borland compilers only.} This variable contains the runtime library needed to link against when building a multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_THREAD \e {This is used on Unix platforms only.} This variable contains all libraries that need to be linked against when building a multi-threaded application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_WINDOWS \e {This is used on Windows only.} This variable contains all windows libraries.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_X11 \e {This is used on Unix platforms only.} This variable contains all X11 libraries.The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIBS_X11SM \e {This is used on Unix platforms only.} This variable contains all X11 session management libraries. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LIB_FLAG This variable is not empty if the \c lib template is specified. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_LINK_SHLIB_CMD This variable contains the command to execute when creating a shared library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_POST_LINK This variable contains the command to execute after linking the TARGET together. This variable is normally empty and therefore nothing is executed, additionally some backends will not support this - mostly only Makefile backends. \section1 QMAKE_PRE_LINK This variable contains the command to execute before linking the TARGET together. This variable is normally empty and therefore nothing is executed, additionally some backends will not support this - mostly only Makefile backends. \section1 QMAKE_LN_SHLIB This variable contains the command to execute when creating a link to a shared library. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_MAC_SDK This variable is used on Mac OS X when building universal binaries. This process is described in more detail in the \l{Deploying an Application on Mac OS X#Architecture Dependencies}{Deploying an Application on Mac OS X} document. \section1 QMAKE_MACOSX_DEPLOYMENT_TARGET This variable only has an effect when building on Mac OS X. On that platform, the variable will be forwarded to the MACOSX_DEPLOYMENT_TARGET environment variable, which is interpreted by the compiler or linker. For more information, see the \l{Deploying an Application on Mac OS X#Mac OS X Version Dependencies}{Deploying an Application on Mac OS X} document. \section1 QMAKE_MAKEFILE This variable contains the name of the Makefile to create. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_MOC_SRC This variable contains the names of all moc source files to generate and include in the project. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_QMAKE This variable contains the location of qmake if it is not in the path. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_QT_DLL This variable is not empty if Qt was built as a dll. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_RESOURCE_FLAGS This variable is used to customize the list of options passed to the \l{rcc}{Resource Compiler} in each of the build rules where it is used. For example, the following line ensures that the \c{-threshold} and \c{-compress} options are used with particular values each time that \c rcc is invoked: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 45 \section1 QMAKE_RPATH \e {This is used on Unix platforms only.} Is equivalent to \l QMAKE_LFLAGS_RPATH. \section1 QMAKE_RPATHDIR \e {This is used on Unix platforms only.} A list of library directory paths, these paths are added to the executable at link time so that the paths will be preferentially searched at runtime. \section1 QMAKE_RUN_CC This variable specifies the individual rule needed to build an object. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_RUN_CC_IMP This variable specifies the individual rule needed to build an object. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_RUN_CXX This variable specifies the individual rule needed to build an object. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_RUN_CXX_IMP This variable specifies the individual rule needed to build an object. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_TARGET This variable contains the name of the project target. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 QMAKE_UIC This variable contains the location of uic if it is not in the path. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. It can be used to specify arguments to uic as well, such as additional plugin paths. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 46 \section1 QT The values stored in the \c QT variable control which of the Qt modules are used by your project. The table below shows the options that can be used with the \c QT variable and the features that are associated with each of them: \table \header \o Option \o Features \row \o core (included by default) \o QtCore module \row \o gui (included by default) \o QtGui module \row \o network \o QtNetwork module \row \o opengl \o QtOpenGL module \row \o phonon \o Phonon Multimedia Framework \row \o sql \o QtSql module \row \o svg \o QtSvg module \row \o xml \o QtXml module \row \o webkit \o WebKit integration \row \o qt3support \o Qt3Support module \endtable By default, \c QT contains both \c core and \c gui, ensuring that standard GUI applications can be built without further configuration. If you want to build a project \e without the QtGui module, you need to exclude the \c gui value with the "-=" operator; the following line will result in a minimal Qt project being built: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 47 Note that adding the \c opengl option to the \c QT variable automatically causes the equivalent option to be added to the \c CONFIG variable. Therefore, for Qt applications, it is not necessary to add the \c opengl option to both \c CONFIG and \c{QT}. \section1 QTPLUGIN This variable contains a list of names of static plugins that are to be compiled with an application so that they are available as built-in resources. \target QT_VERSION \section1 QT_VERSION This variable contains the current version of Qt. \target QT_MAJOR_VERSION \section1 QT_MAJOR_VERSION This variable contains the current major version of Qt. \target QT_MINOR_VERSION \section1 QT_MINOR_VERSION This variable contains the current minor version of Qt. \target QT_PATCH_VERSION \section1 QT_PATCH_VERSION This variable contains the current patch version of Qt. \section1 RC_FILE This variable contains the name of the resource file for the application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target RCC_DIR \section1 RCC_DIR This variable specifies the directory where all intermediate resource files should be placed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 48 \target REQUIRES \section1 REQUIRES This is a special variable processed by \c qmake. If the contents of this variable do not appear in CONFIG by the time this variable is assigned, then a minimal Makefile will be generated that states what dependencies (the values assigned to REQUIRES) are missing. This is mainly used in Qt's build system for building the examples. \section1 RESOURCES This variable contains the name of the resource collection file (qrc) for the application. Further information about the resource collection file can be found at \l{The Qt Resource System}. \section1 RES_FILE This variable contains the name of the resource file for the application. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target RSS_RULES \section1 RSS_RULES \e {This is only used on the Symbian platform.} Generic RSS file content can be specified with this variable. The syntax is similar to \c MMP_RULES and \c BLD_INF_RULES. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 144 This will add the specified statement to the end of the \c APP_REGISTRATION_INFO resource struct in the generated registration resource file. As an impact of this statement, the application will not be visible in application shell. It is also possible to add multiple rows in a single block. Each double quoted string will be placed on a new row in the registration resource file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 145 This example will install the application to MyFolder in the Symbian platform application shell. In addition it will make the application to be launched in background. For detailed list of possible \c APP_REGISTRATION_INFO statements, please refer to the Symbian platform help. \note You should not use \c RSS_RULES variable to set the following RSS statements: \c app_file, \c localisable_resource_file, and \c localisable_resource_id. These statements are internally handled by qmake. There is a number of special modifiers you can attach to \c RSS_RULES to specify where in the application registration file the rule will be written: \table \header \o Modifier \o Location of the rule \row \o \o Inside \c APP_REGISTRATION_INFO resource struct. \row \o .header \o Before \c APP_REGISTRATION_INFO resource struct. \row \o .footer \o After \c APP_REGISTRATION_INFO resource struct. \row \o .service_list \o Inside a \c SERVICE_INFO item in the \c service_list of \c APP_REGISTRATION_INFO \row \o .file_ownership_list \o Inside a \c FILE_OWNERSHIP_INFO item in the \c file_ownership_list of \c APP_REGISTRATION_INFO \row \o .datatype_list \o Inside a \c DATATYPE item in the \c datatype_list of \c APP_REGISTRATION_INFO \endtable For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 151 This example will define service information for a fictional service that requires an icon to be supplied via the \c opaque_data of the service information. \target S60_VERSION \section1 S60_VERSION \e {This is only used on the Symbian platform.} Contains the version number of the underlying S60 SDK; e.g. "5.0". \target SIGNATURE_FILE \section1 SIGNATURE_FILE \e {This is only used on Windows CE.} Specifies which signature file should be used to sign the project target. \note This variable will overwrite the setting you have specified in configure, with the \c -signature option. \target SOURCES \section1 SOURCES This variable contains the name of all source files in the project. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 49 See also \l{#HEADERS}{HEADERS} \section1 SRCMOC This variable is set by \c qmake if files can be found that contain the Q_OBJECT macro. \c SRCMOC contains the name of all the generated moc files. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target SUBDIRS \section1 SUBDIRS This variable, when used with the \l{#TEMPLATE}{\c subdirs template} contains the names of all subdirectories that contain parts of the project that need be built. Each subdirectory must contain its own project file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 50 It is essential that the project file in each subdirectory has the same name as the subdirectory itself, so that \c qmake can find it. For example, if the subdirectory is called \c myapp then the project file in that directory should be called \c myapp.pro. If you need to ensure that the subdirectories are built in the order in which they are specified, update the \l{#CONFIG}{CONFIG} variable to include the \c ordered option: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 51 It is possible to modify this default behavior of \c SUBDIRS by giving additional modifiers to \c SUBDIRS elements. Supported modifiers are: \table \header \o Modifier \o Effect \row \o .subdir \o Use the specified subdirectory instead of \c SUBDIRS value. \row \o .file \o Specify the subproject \c pro file explicitly. Cannot be used in conjunction with \c .subdir modifier. \row \o .condition \o Specifies a \c bld.inf define that must be true for subproject to be built. Available only on Symbian platform. \row \o .depends \o This subproject depends on specified subproject. Available only on platforms that use makefiles. \row \o .makefile \o The makefile of subproject. Available only on platforms that use makefiles. \row \o .target \o Base string used for makefile targets related to this subproject. Available only on platforms that use makefiles. \endtable For example, define two subdirectories, both of which reside in a different directory than the \c SUBDIRS value, and one of the subdirectories must be built before the other: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 149 For example, define a subdirectory that is only build for emulator builds in Qt for Symbian: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 150 \target TARGET \section1 TARGET This specifies the name of the target file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 52 The project file above would produce an executable named \c myapp on unix and 'myapp.exe' on windows. \target TARGET.CAPABILITY \section1 TARGET.CAPABILITY \e {This is only used on the Symbian platform.} Specifies which platform capabilities the application should have. For more information, please refer to the Symbian SDK documentation. \target TARGET.EPOCALLOWDLLDATA \section1 TARGET.EPOCALLOWDLLDATA \e {This is only used on the Symbian platform.} Specifies whether static data should be allowed in the application. Symbian disallows this by default in order to save memory. To use it, set this to 1. \target TARGET.EPOCHEAPSIZE \section1 TARGET.EPOCHEAPSIZE \e {This is only used on the Symbian platform.} Specifies the minimum and maximum heap size of the application. The program will refuse to run if the minimum size is not available when it starts. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 135 \target TARGET.EPOCSTACKSIZE \section1 TARGET.EPOCSTACKSIZE \e {This is only used on the Symbian platform.} Specifies the maximum stack size of the application. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 136 \target TARGET.SID \section1 TARGET.SID \e {This is only used on the Symbian platform.} Specifies which secure identifier to use for the target application or library. For more information, see the Symbian SDK documentation. \target TARGET.UID2 \section1 TARGET.UID2 \e {This is only used on the Symbian platform.} Specifies which unique identifier 2 to use for the target application or library. If this variable is not specified, it defaults to the same value as TARGET.UID3. For more information, see the Symbian SDK documentation. \target TARGET.UID3 \section1 TARGET.UID3 \e {This is only used on the Symbian platform.} Specifies which unique identifier 3 to use for the target application or library. If this variable is not specified, a UID3 suitable for development and debugging will be generated automatically. However, applications being released should always define this variable. For more information, see the Symbian SDK documentation. \target TARGET.VID \section1 TARGET.VID \e {This is only used on the Symbian platform.} Specifies which vendor identifier to use for the target application or library. For more information, see the Symbian SDK documentation. \section1 TARGET_EXT This variable specifies the target's extension. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 TARGET_x This variable specifies the target's extension with a major version number. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 TARGET_x.y.z This variable specifies the target's extension with version number. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target TEMPLATE \section1 TEMPLATE This variable contains the name of the template to use when generating the project. The allowed values are: \table \header \o Option \o Description \row \o app \o Creates a Makefile for building applications (the default). (See \l{qmake Common Projects#Application}{qmake Common Projects} for more information.) \row \o lib \o Creates a Makefile for building libraries. (See \l{qmake Common Projects#Library}{qmake Common Projects} for more information.) \row \o subdirs \o Creates a Makefile for building targets in subdirectories. The subdirectories are specified using the \l{#SUBDIRS}{SUBDIRS} variable. \row \o vcapp \o \e {Windows only} Creates an application project for Visual Studio. (See \l{qmake Platform Notes#Creating Visual Studio Project Files}{qmake Platform Notes} for more information.) \row \o vclib \o \e {Windows only} Creates a library project for Visual Studio. (See \l{qmake Platform Notes#Creating Visual Studio Project Files}{qmake Platform Notes} for more information.) \endtable For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 53 The template can be overridden by specifying a new template type with the \c -t command line option. This overrides the template type \e after the .pro file has been processed. With .pro files that use the template type to determine how the project is built, it is necessary to declare TEMPLATE on the command line rather than use the \c -t option. \section1 TRANSLATIONS This variable contains a list of translation (.ts) files that contain translations of the user interface text into non-native languages. See the \l{Qt Linguist Manual} for more information about internationalization (i18n) and localization (l10n) with Qt. \section1 UICIMPLS This variable contains a list of the generated implementation files by UIC. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 UICOBJECTS This variable is generated from the UICIMPLS variable. The extension of each file will have been replaced by .o (Unix) or .obj (Win32). The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target UI_DIR \section1 UI_DIR This variable specifies the directory where all intermediate files from uic should be placed. This variable overrides both UI_SOURCES_DIR and UI_HEADERS_DIR. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 54 \target UI_HEADERS_DIR \section1 UI_HEADERS_DIR This variable specifies the directory where all declaration files (as generated by uic) should be placed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 55 \target UI_SOURCES_DIR \section1 UI_SOURCES_DIR This variable specifies the directory where all implementation files (as generated by uic) should be placed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 56 \target VERSION \section1 VERSION This variable contains the version number of the application or library if either the \c app \l{#TEMPLATE}{TEMPLATE} or the \c lib \l{#TEMPLATE}{TEMPLATE} is specified. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 57 \section1 VER_MAJ This variable contains the major version number of the library, if the \c lib \l{#TEMPLATE}{template} is specified. \section1 VER_MIN This variable contains the minor version number of the library, if the \c lib \l{#TEMPLATE}{template} is specified. \section1 VER_PAT This variable contains the patch version number of the library, if the \c lib \l{#TEMPLATE}{template} is specified. \section1 VPATH This variable tells \c qmake where to search for files it cannot open. With this you may tell \c qmake where it may look for things like SOURCES, and if it finds an entry in SOURCES that cannot be opened it will look through the entire VPATH list to see if it can find the file on its own. See also \l{#DEPENDPATH}{DEPENDPATH}. \section1 YACCIMPLS This variable contains a list of yacc source files. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \section1 YACCOBJECTS This variable contains a list of yacc object files. The value of this variable is typically handled by \c qmake or \l{#QMAKESPEC}{qmake.conf} and rarely needs to be modified. \target YACCSOURCES \section1 YACCSOURCES This variable contains a list of yacc source files to be included in the project. All dependencies, headers and source files will automatically be included in the project. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 58 \section1 _PRO_FILE_ This variable contains the path to the project file in use. For example, the following line causes the location of the project file to be written to the console: \snippet doc/src/snippets/qmake/project_location.pro project file \section1 _PRO_FILE_PWD_ This variable contains the path to the directory containing the project file in use. For example, the following line causes the location of the directory containing the project file to be written to the console: \snippet doc/src/snippets/qmake/project_location.pro project file directory */ /*! \page qmake-function-reference.html \title qmake Function Reference \contentspage {qmake Manual}{Contents} \previouspage qmake Variable Reference \nextpage Configuring qmake's Environment \c qmake provides built-in functions to allow the contents of variables to be processed, and to enable tests to be performed during the configuration process. Functions that process the contents of variables typically return values that can be assigned to other variables, and these values are obtained by prefixing function with the \c $$ operator. Functions that perform tests are usually used as the conditional parts of scopes; these are indicated in the function descriptions below. \tableofcontents{2} \section1 basename(variablename) Returns the basename of the file specified. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 59 \section1 CONFIG(config) [Conditional] This function can be used to test for variables placed into the \c CONFIG variable. This is the same as regular old style (tmake) scopes, but has the added advantage a second parameter can be passed to test for the active config. As the order of values is important in \c CONFIG variables (i.e. the last one set will be considered the active config for mutually exclusive values) a second parameter can be used to specify a set of values to consider. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 60 Because release is considered the active setting (for feature parsing) it will be the CONFIG used to generate the build file. In the common case a second parameter is not needed, but for specific mutual exclusive tests it is invaluable. \section1 contains(variablename, value) [Conditional] Succeeds if the variable \e variablename contains the value \e value; otherwise fails. You can check the return value of this function using a scope. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 61 The contents of the scope are only processed if the \c drivers variable contains the value, \c network. If this is the case, the appropriate files are added to the \c SOURCES and \c HEADERS variables. \section1 count(variablename, number) [Conditional] Succeeds if the variable \e variablename contains a list with the specified \e number of value; otherwise fails. This function is used to ensure that declarations inside a scope are only processed if the variable contains the correct number of values; for example: \snippet doc/src/snippets/qmake/functions.pro 2 \section1 dirname(file) Returns the directory name part of the specified file. For example: \snippet doc/src/snippets/qmake/dirname.pro 0 \section1 error(string) This function never returns a value. \c qmake displays the given \e string to the user, and exits. This function should only be used for unrecoverable errors. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 62 \section1 eval(string) [Conditional] Evaluates the contents of the string using \c qmake's syntax rules and returns true. Definitions and assignments can be used in the string to modify the values of existing variables or create new definitions. For example: \snippet doc/src/snippets/qmake/functions.pro 4 Note that quotation marks can be used to delimit the string, and that the return value can be discarded if it is not needed. \section1 exists(filename) [Conditional] Tests whether a file with the given \e filename exists. If the file exists, the function succeeds; otherwise it fails. If a regular expression is specified for the filename, this function succeeds if any file matches the regular expression specified. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 63 Note that "/" can be used as a directory separator, regardless of the platform in use. \section1 find(variablename, substr) Places all the values in \e variablename that match \e substr. \e substr may be a regular expression, and will be matched accordingly. \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 64 MY_VAR2 will contain '-Lone -Ltwo -Lthree -Lfour -Lfive', and MY_VAR3 will contains 'three two three'. \section1 for(iterate, list) This special test function will cause a loop to be started that iterates over all values in \e list, setting \e iterate to each value in turn. As a convenience, if \e list is 1..10 then iterate will iterate over the values 1 through 10. The use of an else scope afer a condition line with a for() loop is disallowed. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 65 \section1 include(filename) [Conditional] Includes the contents of the file specified by \e filename into the current project at the point where it is included. This function succeeds if \e filename is included; otherwise it fails. The included file is processed immediately. You can check whether the file was included by using this function as the condition for a scope; for example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 66 \section1 infile(filename, var, val) [Conditional] Succeeds if the file \e filename (when parsed by \c qmake itself) contains the variable \e var with a value of \e val; otherwise fails. If you do not specify a third argument (\e val), the function will only test whether \e var has been declared in the file. \section1 isEmpty(variablename) [Conditional] Succeeds if the variable \e variablename is empty; otherwise fails. This is the equivalent of \c{count( variablename, 0 )}. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 67 \section1 join(variablename, glue, before, after) Joins the value of \e variablename with \c glue. If this value is non-empty it prefixes the value with \e before and suffix it with \e after. \e variablename is the only required field, the others default to empty strings. If you need to encode spaces in \e glue, \e before, or \e after you must quote them. \section1 member(variablename, position) Returns the value at the given \e position in the list of items in \e variablename. If an item cannot be found at the position specified, an empty string is returned. \e variablename is the only required field. If not specified, \c position defaults to 0, causing the first value in the list to be returned. \section1 message(string) This function simply writes a message to the console. Unlike the \c error() function, this function allows processing to continue. \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 68 The above line causes "This is a message" to be written to the console. The use of quotation marks is optional. \note By default, messages are written out for each Makefile generated by qmake for a given project. If you want to ensure that messages only appear once for each project, test the \c build_pass variable \l{qmake Advanced Usage}{in conjunction with a scope} to filter out messages during builds; for example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 69 \section1 prompt(question) Displays the specified \e question, and returns a value read from stdin. \section1 quote(string) Converts a whole \e string into a single entity and returns the result. Newlines, carriage returns, and tabs can be specified in the string with \\n \\r and \\t. The return value does not contain either single or double quotation marks unless you explicitly include them yourself, but will be placed into a single entry (for literal expansion). \section1 replace(string, old_string, new_string) Replaces each instance of \c old_string with \c new_string in the contents of the variable supplied as \c string. For example, the code \snippet doc/src/snippets/qmake/replace.pro 0 prints the message: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 70 \section1 sprintf(string, arguments...) Replaces %1-%9 with the arguments passed in the comma-separated list of function \e arguments and returns the processed string. \section1 system(command) [Conditional] Executes the given \c command in a secondary shell, and succeeds if the command returns with a zero exit status; otherwise fails. You can check the return value of this function using a scope: For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 71 Alternatively, you can use this function to obtain stdout and stderr from the command, and assign it to a variable. For example, you can use this to interrogate information about the platform: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 72 \target unique \section1 unique(variablename) This will return a list of values in variable that are unique (that is with repetitive entries removed). For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 73 \section1 warning(string) This function will always succeed, and will display the given \e string to the user. message() is a synonym for warning(). */ /*! \page qmake-environment-reference.html \contentspage {qmake Manual}{Contents} \previouspage qmake Function Reference \title Configuring qmake's Environment \tableofcontents \target Properties \section1 Properties \c qmake has a system of persistent information, this allows you to \c set a variable in qmake once, and each time qmake is invoked this value can be queried. Use the following to set a property in qmake: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 74 The appropriate variable and value should be substituted for \c VARIABLE and \c VALUE. To retrieve this information back from qmake you can do: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 75 \note \c{qmake -query} will only list variables that you have previously set with \c{qmake -set VARIABLE VALUE}. This information will be saved into a QSettings object (meaning it will be stored in different places for different platforms). As \c VARIABLE is versioned as well, you can set one value in an older version of \c qmake, and newer versions will retrieve this value. However, if you set \c VARIABLE for a newer version of \c qmake, the older version will not use this value. You can however query a specific version of a variable if you prefix that version of \c qmake to \c VARIABLE, as in the following example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 76 \c qmake also has the notion of \c builtin properties, for example you can query the installation of Qt for this version of \c qmake with the \c QT_INSTALL_PREFIX property: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 77 These built-in properties cannot have a version prefixed to them as they are not versioned, and each version of \c qmake will have its own built-in set of these values. The list below outlines the built-in properties: \list \o \c QT_INSTALL_PREFIX - Where the version of Qt this qmake is built for resides \o \c QT_INSTALL_DATA - Where data for this version of Qt resides \o \c QMAKE_VERSION - The current version of qmake \endlist Finally, these values can be queried in a project file with a special notation such as: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 78 \target QMAKESPEC \section1 QMAKESPEC \c qmake requires a platform and compiler description file which contains many default values used to generate appropriate Makefiles. The standard Qt distribution comes with many of these files, located in the \c mkspecs subdirectory of the Qt installation. The \c QMAKESPEC environment variable can contain any of the following: \list \o A complete path to a directory containing a \c{qmake.conf} file. In this case \c qmake will open the \c{qmake.conf} file from within that directory. If the file does not exist, \c qmake will exit with an error. \o The name of a platform-compiler combination. In this case, \c qmake will search in the directory specified by the \c mkspecs subdirectory of the data path specified when Qt was compiled (see QLibraryInfo::DataPath). \endlist \bold{Note:} The \c QMAKESPEC path will automatically be added to the \l{qmake Variable Reference#INCLUDEPATH}{INCLUDEPATH} system variable. \target INSTALLS \section1 INSTALLS It is common on Unix to also use the build tool to install applications and libraries; for example, by invoking \c{make install}. For this reason, \c qmake has the concept of an install set, an object which contains instructions about the way part of a project is to be installed. For example, a collection of documentation files can be described in the following way: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 79 The \c path member informs \c qmake that the files should be installed in \c /usr/local/program/doc (the path member), and the \c files member specifies the files that should be copied to the installation directory. In this case, everything in the \c docs directory will be coped to \c /usr/local/program/doc. Once an install set has been fully described, you can append it to the install list with a line like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 80 \c qmake will ensure that the specified files are copied to the installation directory. If you require greater control over this process, you can also provide a definition for the \c extra member of the object. For example, the following line tells \c qmake to execute a series of commands for this install set: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 81 The \c unix scope (see \l{qmake Advanced Usage#Scopes and Conditions}{Scopes and Conditions}) ensures that these particular commands are only executed on Unix platforms. Appropriate commands for other platforms can be defined using other scope rules. Commands specified in the \c extra member are executed before the instructions in the other members of the object are performed. If you append a built-in install set to the \c INSTALLS variable and do not specify \c files or \c extra members, \c qmake will decide what needs to be copied for you. Currently, the only supported built-in install set is \c target: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 82 In the above lines, \c qmake knows what needs to be copied, and will handle the installation process automatically. \target cache \section1 Cache File The cache file is a special file \c qmake reads to find settings not specified in the \c qmake.conf file, project files, or at the command line. If \c -nocache is not specified when \c qmake is run, it will try to find a file called \c{.qmake.cache} in parent directories of the current directory. If it fails to find this file, it will silently ignore this step of processing. If it finds a \c{.qmake.cache} file then it will process this file first before it processes the project file. \target LibDepend \section1 Library Dependencies Often when linking against a library, \c qmake relies on the underlying platform to know what other libraries this library links against, and lets the platform pull them in. In many cases, however, this is not sufficent. For example, when statically linking a library, no other libraries are linked to, and therefore no dependencies to those libraries are created. However, an application that later links against this library will need to know where to find the symbols that the static library will require. To help with this situation, \c qmake attempts to follow a library's dependencies where appropriate, but this behavior must be explicitly enabled by following two steps. The first step is to enable dependency tracking in the library itself. To do this you must tell \c qmake to save information about the library: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 83 This is only relevant to the \c lib template, and will be ignored for all others. When this option is enabled, \c qmake will create a file ending in .prl which will save some meta-information about the library. This metafile is just like an ordinary project file, but only contains internal variable declarations. You are free to view this file and, if it is deleted, \c qmake will know to recreate it when necessary, either when the project file is later read, or if a dependent library (described below) has changed. When installing this library, by specifying it as a target in an \c INSTALLS declaration, \c qmake will automatically copy the .prl file to the installation path. The second step in this process is to enable reading of this meta information in the applications that use the static library: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 84 When this is enabled, \c qmake will process all libraries linked to by the application and find their meta-information. \c qmake will use this to determine the relevant linking information, specifically adding values to the application project file's list of \c DEFINES as well as \c LIBS. Once \c qmake has processed this file, it will then look through the newly introduced libraries in the \c LIBS variable, and find their dependent .prl files, continuing until all libraries have been resolved. At this point, the Makefile is created as usual, and the libraries are linked explicitly against the application. The internals of the .prl file are left closed so they can easily change later. They are not designed to be changed by hand, should only be created by \c qmake, and should not be transferred between operating systems as they may contain platform-dependent information. \target Extensions \section1 File Extensions Under normal circumstances \c qmake will try to use appropriate file extensions for your platform. However, it is sometimes necessary to override the default choices for each platform and explicitly define file extensions for \c qmake to use. This is achieved by redefining certain built-in variables; for example the extension used for \l moc files can be redefined with the following assignment in a project file: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 85 The following variables can be used to redefine common file extensions recognized by \c qmake: \list \o QMAKE_EXT_MOC - This modifies the extension placed on included moc files. \o QMAKE_EXT_UI - This modifies the extension used for designer UI files (usually in \c FORMS). \o QMAKE_EXT_PRL - This modifies the extension placed on \l{#LibDepend}{library dependency files}. \o QMAKE_EXT_LEX - This changes the suffix used in files (usually in \c LEXSOURCES). \o QMAKE_EXT_YACC - This changes the suffix used in files (usually in \c YACCSOURCES). \o QMAKE_EXT_OBJ - This changes the suffix used on generated object files. \endlist All of the above accept just the first value, so you must assign to it just one value that will be used throughout your project file. There are two variables that accept a list of values: \list \o QMAKE_EXT_CPP - Causes \c qmake to interpret all files with these suffixes as C++ source files. \o QMAKE_EXT_H - Causes \c qmake to interpret all files with these suffixes as C and C++ header files. \endlist \target Customizing \section1 Customizing Makefile Output \c qmake tries to do everything expected of a cross-platform build tool. This is often less than ideal when you really need to run special platform-dependent commands. This can be achieved with specific instructions to the different \c qmake backends. Customization of the Makefile output is performed through an object-style API as found in other places in \c qmake. Objects are defined automatically by specifying their members; for example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 86 The definitions above define a \c qmake target called \c mytarget, containing a Makefile target called \c{.buildfile} which in turn is generated with the \c touch command. Finally, the \c{.depends} member specifies that \c mytarget depends on \c mytarget2, another target that is defined afterwards. \c mytarget2 is a dummy target; it is only defined to echo some text to the console. The final step is to instruct \c qmake that this object is a target to be built: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 87 This is all you need to do to actually build custom targets. Of course, you may want to tie one of these targets to the \l{qmake Variable Reference#TARGET}{qmake build target}. To do this, you simply need to include your Makefile target in the list of \l{qmake Variable Reference#PRE_TARGETDEPS}{PRE_TARGETDEPS}. The following tables are an overview of the options available to you with the QMAKE_EXTRA_TARGETS variable. \table \header \o Member \o Description \row \o commands \o The commands for generating the custom build target. \row \o CONFIG \o Specific configuration options for the custom build target. See the CONFIG table for details. \row \o depends \o The existing build targets that the custom build target depends on. \row \o recurse \o Specifies which sub-targets should used when creating the rules in the Makefile to call in the sub-target specific Makefile. This is only used when \c recursive is set in the CONFIG. \row \o recurse_target \o Specifies the target that should be built via the sub-target Makefile for the rule in the Makefile. This adds something like $(MAKE) -f Makefile.[subtarget] [recurse_target]. This is only used when \c recursive is set in the CONFIG. \row \o target \o The file being created by the custom build target. \endtable List of members specific to the CONFIG option: \table \header \o Member \o Description \row \o recursive \o Indicates that rules should be created in the Makefile and thus call the relevant target inside the sub-target specific Makefile. This defaults to creating an entry for each of the sub-targets. \endtable For convenience, there is also a method of customizing projects for new compilers or preprocessors: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 88 With the above definitions, you can use a drop-in replacement for moc if one is available. The commands is executed on all arguments given to the \c NEW_HEADERS variable (from the \c input member), and the result is written to the file defined by the \c output member; this file is added to the other source files in the project. Additionally, \c qmake will execute \c depend_command to generate dependency information, and place this information in the project as well. These commands can easily be placed into a cache file, allowing subsequent project files to add arguments to \c NEW_HEADERS. The following tables are an overview of the options available to you with the QMAKE_EXTRA_COMPILERS variable. \table \header \o Member \o Description \row \o commands \o The commands used for for generating the output from the input. \row \o CONFIG \o Specific configuration options for the custom compiler. See the CONFIG table for details. \row \o depend_command \o Specifies a command used to generate the list of dependencies for the output. \row \o dependency_type \o Specifies the type of file the output is, if it is a known type (such as TYPE_C, TYPE_UI, TYPE_QRC) then it is handled as one of those type of files. \row \o depends \o Specifies the dependencies of the output file. \row \o input \o The variable that contains the files that should be processed with the custom compiler. \row \o name \o A description of what the custom compiler is doing. This is only used in some backends. \row \o output \o The filename that is created from the custom compiler. \row \o output_function \o Specifies a custom qmake function that is used to specify the filename to be created. \row \o variable_out \o The variable that the files created from the output should be added to. \endtable List of members specific to the CONFIG option: \table \header \o Member \o Description \row \o commands \o The commands used for for generating the output from the input. \row \o CONFIG \o Specific configuration options for the custom compiler. See the CONFIG table for details. \row \o depend_command \o Specifies a command used to generate the list of dependencies for the output. \row \o dependency_type \o Specifies the type of file the output is, if it is a known type (such as TYPE_C, TYPE_UI, TYPE_QRC) then it is handled as one of those type of files. \row \o depends \o Specifies the dependencies of the output file. \row \o input \o The variable that contains the files that should be processed with the custom compiler. \row \o name \o A description of what the custom compiler is doing. This is only used in some backends. \row \o output \o The filename that is created from the custom compiler. \row \o output_function \o Specifies a custom qmake function that is used to specify the filename to be created. \row \o variables \o Indicates that the variables specified here are replaced with $(QMAKE_COMP_VARNAME) when refered to in the pro file as $(VARNAME). \row \o variable_out \o The variable that the files created from the output should be added to. \endtable List of members specific to the CONFIG option: \table \header \o Member \o Description \row \o combine \o Indicates that all of the input files are combined into a single output file. \row \o target_predeps \o Indicates that the output should be added to the list of PRE_TARGETDEPS. \row \o explicit_dependencies \o The dependencies for the output only get generated from the depends member and from nowhere else. \row \o no_link \o Indicates that the output should not be added to the list of objects to be linked in. \endtable \note Symbian platform specific: Generating objects to be linked in is not supported on the Symbian platform, so either the \c CONFIG option \c no_link or variable \c variable_out should always be defined for extra compilers. */ /*! \page qmake-advanced-usage.html \title qmake Advanced Usage \contentspage {qmake Manual}{Contents} \previouspage qmake Platform Notes \nextpage Using Precompiled Headers Many \c qmake project files simply describe the sources and header files used by the project, using a list of \c{name = value} and \c{name += value} definitions. \c qmake also provides other operators, functions, and scopes that can be used to process the information supplied in variable declarations. These advanced features allow Makefiles to be generated for multiple platforms from a single project file. \tableofcontents \section1 Operators In many project files, the assignment (\c{=}) and append (\c{+=}) operators can be used to include all the information about a project. The typical pattern of use is to assign a list of values to a variable, and append more values depending on the result of various tests. Since \c qmake defines certain variables using default values, it is sometimes necessary to use the removal (\c{-=}) operator to filter out values that are not required. The following operators can be used to manipulate the contents of variables. The \c = operator assigns a value to a variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 89 The above line sets the \c TARGET variable to \c myapp. This will overwrite any values previously set for \c TARGET with \c myapp. The \c += operator appends a new value to the list of values in a variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 90 The above line appends \c QT_DLL to the list of pre-processor defines to be put in the generated Makefile. The \c -= operator removes a value from the list of values in a variable: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 91 The above line removes \c QT_DLL from the list of pre-processor defines to be put in the generated Makefile. The \c *= operator adds a value to the list of values in a variable, but only if it is not already present. This prevents values from being included many times in a variable. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 92 In the above line, \c QT_DLL will only be added to the list of pre-processor defines if it is not already defined. Note that the \l{qmake Function Reference#unique}{unique()} function can also be used to ensure that a variables only contains one instance of each value. The \c ~= operator replaces any values that match a regular expression with the specified value: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 93 In the above line, any values in the list that start with \c QT_D or \c QT_T are replaced with \c QT. The \c $$ operator is used to extract the contents of a variable, and can be used to pass values between variables or supply them to functions: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 94 \target Scopes \section1 Scopes Scopes are similar to \c if statements in procedural programming languages. If a certain condition is true, the declarations inside the scope are processed. \section2 Syntax Scopes consist of a condition followed by an opening brace on the same line, a sequence of commands and definitions, and a closing brace on a new line: \snippet doc/src/snippets/qmake/scopes.pro syntax The opening brace \e{must be written on the same line as the condition}. Scopes may be concatenated to include more than one condition; see below for examples. \section2 Scopes and Conditions A scope is written as a condition followed by a series of declarations contained within a pair of braces; for example: \snippet doc/src/snippets/qmake/scopes.pro 0 The above code will add the \c paintwidget_win.cpp file to the sources listed in the generated Makefile if \c qmake is used on a Windows platform. If \c qmake is used on a platform other than Windows, the define will be ignored. The conditions used in a given scope can also be negated to provide an alternative set of declarations that will be processed only if the original condition is false. For example, suppose we want to process something on all platforms \e except for Windows. We can achieve this by negating the scope like this: \snippet doc/src/snippets/qmake/scopes.pro 1 Scopes can be nested to combine more than one condition. For instance, if you want to include a particular file for a certain platform only if debugging is enabled then you write the following: \snippet doc/src/snippets/qmake/scopes.pro 2 To save writing many nested scopes, you can nest scopes using the \c : operator. The nested scopes in the above example can be rewritten in the following way: \snippet doc/src/snippets/qmake/scopes.pro 3 You may also use the \c : operator to perform single line conditional assignments; for example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 95 The above line adds \c QT_DLL to the \c DEFINES variable only on the Windows platform. Generally, the \c : operator behaves like a logical AND operator, joining together a number of conditions, and requiring all of them to be true. There is also the \c | operator to act like a logical OR operator, joining together a number of conditions, and requiring only one of them to be true. \snippet doc/src/snippets/qmake/scopes.pro 4 You can also provide alternative declarations to those within a scope by using an \c else scope. Each \c else scope is processed if the conditions for the preceding scopes are false. This allows you to write complex tests when combined with other scopes (separated by the \c : operator as above). For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 96 \section2 Configuration and Scopes The values stored in the \l{qmake-project-files.html#GeneralConfiguration}{\c CONFIG variable} are treated specially by \c qmake. Each of the possible values can be used as the condition for a scope. For example, the list of values held by \c CONFIG can be extended with the \c opengl value: \snippet doc/src/snippets/qmake/configscopes.pro 0 As a result of this operation, any scopes that test for \c opengl will be processed. We can use this feature to give the final executable an appropriate name: \snippet doc/src/snippets/qmake/configscopes.pro 1 \snippet doc/src/snippets/qmake/configscopes.pro 2 \snippet doc/src/snippets/qmake/configscopes.pro 3 This feature makes it easy to change the configuration for a project without losing all the custom settings that might be needed for a specific configuration. In the above code, the declarations in the first scope are processed, and the final executable will be called \c application-gl. However, if \c opengl is not specified, the declarations in the second scope are processed instead, and the final executable will be called \c application. Since it is possible to put your own values on the \c CONFIG line, this provides you with a convenient way to customize project files and fine-tune the generated Makefiles. \section2 Platform Scope Values In addition to the \c win32, \c macx, and \c unix values used in many scope conditions, various other built-in platform and compiler-specific values can be tested with scopes. These are based on platform specifications provided in Qt's \c mkspecs directory. For example, the following lines from a project file show the current specification in use and test for the \c linux-g++ specification: \snippet doc/src/snippets/qmake/specifications.pro 0 You can test for any other platform-compiler combination as long as a specification exists for it in the \c mkspecs directory. The scope \c unix is true for the Symbian platform. \section1 Variables Many of the variables used in project files are special variables that \c qmake uses when generating Makefiles, such as \c DEFINES, \c SOURCES, and \c HEADERS. It is possible for you to create variables for your own use; \c qmake creates new variables with a given name when it encounters an assignment to that name. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 97 There are no restricitions on what you do to your own variables, as \c qmake will ignore them unless it needs to evaluate them when processing a scope. You can also assign the value of a current variable to another variable by prefixing $$ to the variable name. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 98 Now the MY_DEFINES variable contains what is in the DEFINES variable at this point in the project file. This is also equivalent to: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 99 The second notation allows you to append the contents of the variable to another value without separating the two with a space. For example, the following will ensure that the final executable will be given a name that includes the project template being used: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 100 Variables can be used to store the contents of environment variables. These can be evaluated at the time that \c qmake is run, or included in the generated Makefile for evaluation when the project is built. To obtain the contents of an environment value when \c qmake is run, use the \c $$(...) operator: \snippet doc/src/snippets/qmake/environment.pro 0 In the above assignment, the value of the \c PWD environment variable is read when the project file is processed. To obtain the contents of an environment value at the time when the generated Makefile is processed, use the \c $(...) operator: \snippet doc/src/snippets/qmake/environment.pro 1 In the above assignment, the value of \c PWD is read immediately when the project file is processed, but \c $(PWD) is assigned to \c DESTDIR in the generated Makefile. This makes the build process more flexible as long as the environment variable is set correctly when the Makefile is processed. The special \c $$[...] operator can be used to access various configuration options that were set when Qt was built: \snippet doc/src/snippets/qmake/qtconfiguration.pro 0 The variables accessible with this operator are typically used to enable third party plugins and components to be integrated with Qt. For example, a \QD plugin can be installed alongside \QD's built-in plugins if the following declaration is made in its project file: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 101 \target VariableProcessingFunctions \section1 Variable Processing Functions \c qmake provides a selection of built-in functions to allow the contents of variables to be processed. These functions process the arguments supplied to them and return a value, or list of values, as a result. In order to assign a result to a variable, it is necessary to use the \c $$ operator with this type of function in the same way used to assign contents of one variable to another: \snippet doc/src/snippets/qmake/functions.pro 1 This type of function should be used on the right-hand side of assignments (i.e, as an operand). It is possible to define your own functions for processing the contents of variables. These functions can be defined in the following way: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 102 The following example function takes a variable name as its only argument, extracts a list of values from the variable with the \l{qmake-function-reference.html}{eval()} built-in function, and compiles a list of files: \snippet doc/src/snippets/qmake/replacefunction.pro 0 \target ConditionalFunctions \section1 Conditional Functions \c qmake provides built-in functions that can be used as conditions when writing scopes. These functions do not return a value, but instead indicate "success" or "failure": \snippet doc/src/snippets/qmake/functions.pro 3 This type of function should be used in conditional expressions only. It is possible to define your own functions to provide conditions for scopes. The following example tests whether each file in a list exists and returns true if they all exist, or false if not: \snippet doc/src/snippets/qmake/testfunction.pro 0 \section1 Adding New Configuration Features \c qmake lets you create your own \e features that can be included in project files by adding their names to the list of values specified by the \c CONFIG variable. Features are collections of custom functions and definitions in \c{.prf} files that can reside in one of many standard directories. The locations of these directories are defined in a number of places, and \c qmake checks each of them in the following order when it looks for \c{.prf} files: \list 1 \o In a directory listed in the \c QMAKEFEATURES environment variable; this contains a colon-separated list of directories. \o In a directory listed in the \c QMAKEFEATURES property variable; this contains a colon-spearated list of directories. \omit \o In a features directory beneath the project's root directory (where the \c{.qmake.cache} file is generated). \endomit \o In a features directory residing within a \c mkspecs directory. \c mkspecs directories can be located beneath any of the directories listed in the \c QMAKEPATH environment variable (a colon-separated list of directories). (\c{$QMAKEPATH/mkspecs/}) \o In a features directory residing beneath the directory provided by the \c QMAKESPEC environment variable. (\c{$QMAKESPEC/}) \o In a features directory residing in the \c data_install/mkspecs directory. (\c{data_install/mkspecs/}) \o In a features directory that exists as a sibling of the directory specified by the \c QMAKESPEC environment variable. (\c{$QMAKESPEC/../}) \endlist The following features directories are searched for features files: \list 1 \o \c{features/unix}, \c{features/win32}, or \c{features/macx}, depending on the platform in use \o \c features/ \endlist For example, consider the following assignment in a project file: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 103 With this addition to the \c CONFIG variable, \c qmake will search the locations listed above for the \c myfeatures.prf file after it has finished parsing your project file. On Unix systems, it will look for the following file: \list 1 \o \c $QMAKEFEATURES/myfeatures.prf (for each directory listed in the \c QMAKEFEATURES environment variable) \o \c $$QMAKEFEATURES/myfeatures.prf (for each directory listed in the \c QMAKEFEATURES property variable) \o \c myfeatures.prf (in the project's root directory) \o \c $QMAKEPATH/mkspecs/features/unix/myfeatures.prf and \c $QMAKEPATH/mkspecs/features/myfeatures.prf (for each directory listed in the \c QMAKEPATH environment variable) \o \c $QMAKESPEC/features/unix/myfeatures.prf and \c $QMAKESPEC/features/myfeatures.prf \o \c data_install/mkspecs/features/unix/myfeatures.prf and \c data_install/mkspecs/features/myfeatures.prf \o \c $QMAKESPEC/../features/unix/myfeatures.prf and \c $QMAKESPEC/../features/myfeatures.prf \endlist \note The \c{.prf} files must have names in lower case. */ /*! \page qmake-precompiledheaders.html \title Using Precompiled Headers \contentspage {qmake Manual}{Contents} \previouspage qmake Advanced Usage \nextpage qmake Reference \target Introduction Precompiled headers are a performance feature supported by some compilers to compile a stable body of code, and store the compiled state of the code in a binary file. During subsequent compilations, the compiler will load the stored state, and continue compiling the specified file. Each subsequent compilation is faster because the stable code does not need to be recompiled. \c qmake supports the use of precompiled headers (PCH) on some platforms and build environments, including: \list \o Windows \list \o nmake \o Dsp projects (VC 6.0) \o Vcproj projects (VC 7.0 \& 7.1) \endlist \o Mac OS X \list \o Makefile \o Xcode \endlist \o Unix \list \o GCC 3.4 and above \endlist \endlist \target ADD_PCH \section1 Adding Precompiled Headers to Your Project \target PCH_CONTENTS \section2 Contents of the Precompiled Header File The precompiled header must contain code which is \e stable and \e static throughout your project. A typical PCH might look like this: \section3 Example: \c stable.h \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 104 Note that a precompiled header file needs to separate C includes from C++ includes, since the precompiled header file for C files may not contain C++ code. \target PROJECT_OPTIONS \section2 Project Options To make your project use PCH, you only need to define the \c PRECOMPILED_HEADER variable in your project file: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 105 \c qmake will handle the rest, to ensure the creation and use of the precompiled header file. You do not need to include the precompiled header file in \c HEADERS, as \c qmake will do this if the configuration supports PCH. All platforms that support precompiled headers have the configuration option \c precompile_header set. Using this option, you may trigger conditional blocks in your project file to add settings when using PCH. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 106 \section1 Notes on Possible Issues On some platforms, the file name suffix for precompiled header files is the same as that for other object files. For example, the following declarations may cause two different object files with the same name to be generated: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 107 To avoid potential conflicts like these, it is good practice to ensure that header files that will be precompiled are given distinctive names. \target EXAMPLE_PROJECT \section1 Example Project You can find the following source code in the \c{examples/qmake/precompile} directory in the Qt distribution: \section2 \c mydialog.ui \quotefromfile examples/qmake/precompile/mydialog.ui \printuntil \section2 \c stable.h \snippet examples/qmake/precompile/stable.h 0 \section2 \c myobject.h \snippet examples/qmake/precompile/myobject.h 0 \section2 \c myobject.cpp \snippet examples/qmake/precompile/myobject.cpp 0 \section2 \c util.cpp \snippet examples/qmake/precompile/util.cpp 0 \section2 \c main.cpp \snippet examples/qmake/precompile/main.cpp 0 \section2 \c precompile.pro \snippet examples/qmake/precompile/precompile.pro 0 */ /*! \page qmake-tutorial.html \title qmake Tutorial \contentspage {qmake Manual}{Contents} \previouspage qmake Manual \nextpage qmake Common Projects This tutorial teaches you how to use \c qmake. We recommend that you read the \c qmake user guide after completing this tutorial. \section1 Starting off Simple Let's assume that you have just finished a basic implementation of your application, and you have created the following files: \list \o hello.cpp \o hello.h \o main.cpp \endlist You will find these files in the \c{examples/qmake/tutorial} directory of the Qt distribution. The only other thing you know about the setup of the application is that it's written in Qt. First, using your favorite plain text editor, create a file called \c hello.pro in \c{examples/qmake/tutorial}. The first thing you need to do is add the lines that tell \c qmake about the source and header files that are part of your development project. We'll add the source files to the project file first. To do this you need to use the \l{qmake Variable Reference#SOURCES}{SOURCES} variable. Just start a new line with \c {SOURCES +=} and put hello.cpp after it. You should have something like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 108 We repeat this for each source file in the project, until we end up with the following: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 109 If you prefer to use a Make-like syntax, with all the files listed in one go you can use the newline escaping like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 110 Now that the source files are listed in the project file, the header files must be added. These are added in exactly the same way as source files, except that the variable name we use is \l{qmake Variable Reference#HEADERS}{HEADERS}. Once you have done this, your project file should look something like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 111 The target name is set automatically; it is the same as the project file, but with the suffix appropriate to the platform. For example, if the project file is called \c hello.pro, the target will be \c hello.exe on Windows and \c hello on Unix. If you want to use a different name you can set it in the project file: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 112 The final step is to set the \l{qmake Variable Reference#CONFIG}{CONFIG} variable. Since this is a Qt application, we need to put \c qt on the \c CONFIG line so that \c qmake will add the relevant libraries to be linked against and ensure that build lines for \c moc and \c uic are included in the generated Makefile. The finished project file should look like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 113 You can now use \c qmake to generate a Makefile for your application. On the command line, in your project's directory, type the following: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 114 Then type \c make or \c nmake depending on the compiler you use. For Visual Studio users, \c qmake can also generate \c .dsp or \c .vcproj files, for example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 115 \section1 Making an Application Debuggable The release version of an application doesn't contain any debugging symbols or other debugging information. During development it is useful to produce a debugging version of the application that has the relevant information. This is easily achieved by adding \c debug to the \c CONFIG variable in the project file. For example: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 116 Use \c qmake as before to generate a Makefile and you will be able to obtain useful information about your application when running it in a debugging environment. \section1 Adding Platform-Specific Source Files After a few hours of coding, you might have made a start on the platform-specific part of your application, and decided to keep the platform-dependent code separate. So you now have two new files to include into your project file: \c hellowin.cpp and \c hellounix.cpp. We can't just add these to the \c SOURCES variable since this will put both files in the Makefile. So, what we need to do here is to use a scope which will be processed depending on which platform \c qmake is run on. A simple scope that will add in the platform-dependent file for Windows looks like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 117 So if \c qmake is run on Windows, it will add \c hellowin.cpp to the list of source files. If \c qmake is run on any other platform, it will simply ignore it. Now all that is left to be done is to create a scope for the Unix-specific file. When you have done that, your project file should now look something like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 118 Use \c qmake as before to generate a Makefile. \section1 Stopping qmake If a File Doesn't Exist You may not want to create a Makefile if a certain file doesn't exist. We can check if a file exists by using the exists() function. We can stop \c qmake from processing by using the error() function. This works in the same way as scopes do. Simply replace the scope condition with the function. A check for a \c main.cpp file looks like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 119 The \c{!} symbol is used to negate the test; i.e. \c{exists( main.cpp )} is true if the file exists, and \c{!exists( main.cpp )} is true if the file doesn't exist. \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 120 Use \c qmake as before to generate a makefile. If you rename \c main.cpp temporarily, you will see the message and \c qmake will stop processing. \section1 Checking for More than One Condition Suppose you use Windows and you want to be able to see statement output with qDebug() when you run your application on the command line. Unless you build your application with the appropriate console setting, you won't see the output. We can easily put \c console on the \c CONFIG line so that on Windows the makefile will have this setting. However, let's say that we only want to add the \c CONFIG line if we are running on Windows \e and when \c debug is already on the \c CONFIG line. This requires using two nested scopes; just create one scope, then create the other inside it. Put the settings to be processed inside the last scope, like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 121 Nested scopes can be joined together using colons, so the final project file looks like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 122 That's it! You have now completed the tutorial for \c qmake, and are ready to write project files for your development projects. */ /*! \page qmake-common-projects.html \title qmake Common Projects \contentspage {qmake Manual}{Contents} \previouspage qmake Tutorial \nextpage Using qmake This chapter describes how to set up \c qmake project files for three common project types that are based on Qt. Although all kinds of projects use many of the same variables, each of them use project-specific variables to customize output files. Platform-specific variables are not described here; we refer the reader to the \l{Deploying Qt Applications} document for information on issues such as \l{Deploying an Application on Mac OS X#Architecture Dependencies}{building universal binaries for Mac OS X} and \l{Deploying an Application on Windows#Visual Studio 2005 Onwards} {handling Visual Studio manifest files}. \tableofcontents \target Application \section1 Building an Application \section2 The app Template The \c app template tells \c qmake to generate a Makefile that will build an application. With this template, the type of application can be specified by adding one of the following options to the \c CONFIG variable definition: \table \header \o Option \o Description \row \o windows \o The application is a Windows GUI application. \row \o console \o \c app template only: the application is a Windows console application. \endtable When using this template the following \c qmake system variables are recognized. You should use these in your .pro file to specify information about your application. \list \o HEADERS - A list of all the header files for the application. \o SOURCES - A list of all the source files for the application. \o FORMS - A list of all the UI files (created using \c{Qt Designer}) for the application. \o LEXSOURCES - A list of all the lex source files for the application. \o YACCSOURCES - A list of all the yacc source files for the application. \o TARGET - Name of the executable for the application. This defaults to the name of the project file. (The extension, if any, is added automatically). \o DESTDIR - The directory in which the target executable is placed. \o DEFINES - A list of any additional pre-processor defines needed for the application. \o INCLUDEPATH - A list of any additional include paths needed for the application. \o DEPENDPATH - The dependency search path for the application. \o VPATH - The search path to find supplied files. \o DEF_FILE - Windows only: A .def file to be linked against for the application. \o RC_FILE - Windows only: A resource file for the application. \o RES_FILE - Windows only: A resource file to be linked against for the application. \endlist You only need to use the system variables that you have values for, for instance, if you do not have any extra INCLUDEPATHs then you do not need to specify any, \c qmake will add in the default ones needed. For instance, an example project file might look like this: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 123 For items that are single valued, e.g. the template or the destination directory, we use "="; but for multi-valued items we use "+=" to \e add to the existing items of that type. Using "=" replaces the item's value with the new value, for example if we wrote \c{DEFINES=QT_DLL}, all other definitions would be deleted. \target Library \section1 Building a Library \section2 The lib Template The \c lib template tells \c qmake to generate a Makefile that will build a library. When using this template, in addition to the system variables mentioned above for the \c app template the \c VERSION variable is supported. You should use these in your .pro file to specify information about the library. When using the \c lib template, the following options can be added to the \c CONFIG variable to determine the type of library that is built: \table \header \o Option \o Description \row \o dll \o The library is a shared library (dll). \row \o staticlib \o The library is a static library. \row \o plugin \o The library is a plugin; this also enables the dll option. \endtable The following option can also be defined to provide additional information about the library. \list \o VERSION - The version number of the target library, for example, 2.3.1. \endlist The target file name for the library is platform-dependent. For example, on X11 and Mac OS X, the library name will be prefixed by \c lib; on Windows, no prefix is added to the file name. \target Plugin \section1 Building a Plugin Plugins are built using the \c lib template, as described in the previous section. This tells \c qmake to generate a Makefile for the project that will build a plugin in a suitable form for each platform, usually in the form of a library. As with ordinary libraries, the \c VERSION variable is used to specify information about the plugin. \list \o VERSION - The version number of the target library, for example, 2.3.1. \endlist \section2 Building a Qt Designer Plugin \QD plugins are built using a specific set of configuration settings that depend on the way Qt was configured for your system. For convenience, these settings can be enabled by adding \c designer to the project's \c CONFIG variable. For example: \snippet examples/designer/worldtimeclockplugin/worldtimeclockplugin.pro 0 See the \l{Qt Designer Examples} for more examples of plugin-based projects. \section1 Building and Installing in Debug and Release Modes Sometimes, it is necessary to build a project in both debug and release modes. Although the \c CONFIG variable can hold both \c debug and \c release options, the \c debug option overrides the \c release option. \section2 Building in Both Modes To enable a project to be built in both modes, you must add the \c debug_and_release option to your project's \c CONFIG definition: \snippet doc/src/snippets/qmake/debug_and_release.pro 0 \snippet doc/src/snippets/qmake/debug_and_release.pro 1 The scope in the above snippet modifies the build target in each mode to ensure that the resulting targets have different names. Providing different names for targets ensures that one will not overwrite the other. When \c qmake processes the project file, it will generate a Makefile rule to allow the project to be built in both modes. This can be invoked in the following way: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 124 The \c build_all option can be added to the \c CONFIG variable in the project file to ensure that the project is built in both modes by default: \snippet doc/src/snippets/qmake/debug_and_release.pro 2 This allows the Makefile to be processed using the default rule: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 125 \section2 Installing in Both Modes The \c build_all option also ensures that both versions of the target will be installed when the installation rule is invoked: \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 126 It is possible to customize the names of the build targets depending on the target platform. For example, a library or plugin may be named using a different convention on Windows to the one used on Unix platforms: \omit Note: This was originally used in the customwidgetplugin.pro file, but is no longer needed there. \endomit \snippet doc/src/snippets/code/doc_src_qmake-manual.qdoc 127 The default behavior in the above snippet is to modify the name used for the build target when building in debug mode. An \c else clause could be added to the scope to do the same for release mode; left as it is, the target name remains unmodified. */